Search Results

Search found 3754 results on 151 pages for 'vertex buffer'.

Page 138/151 | < Previous Page | 134 135 136 137 138 139 140 141 142 143 144 145  | Next Page >

• How to remove iso 9660 from USB?

  - by a_m0d

  I have somehow managed to write an iso 9660 image onto my USB drive, which makes all my computer think that the device is actually a CD. I have tried various methods of removing this partition, but nothing seems to work. I have tried fdisk, which says $ fdisk -l /dev/sdb Cannot open /dev/sdb parted crashes when I try to use it on this device. I have even tried $ dd if=/dev/zero of=/dev/sdb but it just hangs with no output (either on screen or on disk). However, when I plug the USB in, it does mount, and I can view (but not edit) the files on it. edit: now the result is $ dd if=/dev/zero of=/dev/sdb dd: opening `/dev/sdb': Read-only file system I have also tried re-formatting it on Windows, but it gets to the end of the format process and then says "Couldn't format the drive". How can I remove this partition and get my whole USB drive back to normal again? EDIT 1: Trying a simple mkfs doesn't work: $ sudo mkfs -t vfat /dev/sdb mkfs.vfat 3.0.0 (28 Sep 2008) mkfs.vfat: Will not try to make filesystem on full-disk device '/dev/sdb' (use -I if wanted) I can't do mkfs on /dev/sdb1 because there is no such partition, as shown:$ ls /dev | grep sdb sdb EDIT 2: This is the information posted by dmesg when I plug the device in:$ dmesg . . (snip) . usb 2-1: New USB device found, idVendor=058f, idProduct=6387 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-1: Product: Mass Storage usb 2-1: Manufacturer: Generic usb 2-1: SerialNumber: G0905000000000010885 usb-storage: device found at 4 usb-storage: waiting for device to settle before scanning usb-storage: device scan complete scsi 6:0:0:0: Direct-Access FLASH Drive AU_USB20 8.07 PQ: 0 ANSI: 2 sd 6:0:0:0: [sdb] 4069376 512-byte hardware sectors (2084 MB) sd 6:0:0:0: [sdb] Write Protect is off sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00 sd 6:0:0:0: [sdb] Assuming drive cache: write through sd 6:0:0:0: [sdb] 4069376 512-byte hardware sectors (2084 MB) sd 6:0:0:0: [sdb] Write Protect is off sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00 sd 6:0:0:0: [sdb] Assuming drive cache: write through sdb: unknown partition table sd 6:0:0:0: [sdb] Attached SCSI removable disk sd 6:0:0:0: Attached scsi generic sg2 type 0 ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A SELinux: initialized (dev sdb, type iso9660), uses genfs_contexts CE: hpet increasing min_delta_ns to 15000 nsec This shows that the device is formatted as ISO 9660 and that it is /dev/sdb. EDIT 3: This is the message that I find at the bottom of dmesg after running cfdisk and writing a new partition table to the disk:SELinux: initialized (dev sdb, type iso9660), uses genfs_contexts sd 17:0:0:0: [sdb] Device not ready: Sense Key : Not Ready [current] sd 17:0:0:0: [sdb] Device not ready: < ASC=0xff ASCQ=0xffASC=0xff < ASCQ=0xff end_request: I/O error, dev sdb, sector 0 Buffer I/O error on device sdb, logical block 0 lost page write due to I/O error on sdb

  Read the article

• Troubleshooting an unstable internet connection

  - by Konrad Rudolph

  My MacBook Pro running OS X (10.9, but I had the same problem before) is connected to a Belkin router via WiFi and, using Virgin Media as the ISP, to the internet. The connection is extremely unstable – on some days, I get a ping timeout every few seconds. In addition, some domains seem to suffer general connectivity issues. For instance, I often find that while the youtube.com website loads, none of the videos (which are hosted on a separate domain) do. At other times, videos load but always fail to buffer, even though the actual connection speed is ok, even though I’ve disabled dash playback. Since I’m living in a rented room and the ISP contract isn’t actually mine I’ve got only limited possibilities of addressing the problem. In particular, I have no access to the router configuration and my non tech savvy landlady, while sympathetic, is not in a great hurry to hand the problem over to the ISP’s customer support. What’s more, I seem to be the only person in the house experiencing these problems – but I can imagine that this is simply because I’m the only one who’s using the internet continuously. I’m searching for specific tests that might be able to pinpoint – and ideally solve – the problem. So far all I’ve managed to do is establish that Virgin is routing my traffic in mysterious ways. Here’s an excerpt from traceroute google.co.uk. It’s worth mentioning that the host name doesn’t seem to matter a lot, the trace route is always the same. traceroute: Warning: google.co.uk has multiple addresses; using 62.254.36.148 traceroute to google.co.uk (62.254.36.148), 64 hops max, 52 byte packets 1 (192.168.2.1) 1.112 ms 1.300 ms 2.359 ms 2 10.100.32.1 (10.100.32.1) 11.926 ms 10.217 ms 24.987 ms 3 cmbg-core-1a-ae3-610.network.virginmedia.net (80.1.202.93) 28.809 ms * 66.653 ms 4 popl-bb-1b-ae16-0.network.virginmedia.net (212.43.163.141) 13.759 ms 126.504 ms 20.472 ms 5 nrth-bb-1b-et-010-0.network.virginmedia.net (62.253.175.57) 28.357 ms 16.398 ms 42.387 ms 6 nrth-bb-1c-ae1-0.network.virginmedia.net (62.253.174.110) 27.441 ms 15.622 ms 12.044 ms 7 lutn-icdn-1-ae0-0.network.virginmedia.net (62.253.175.82) 16.678 ms 28.463 ms 28.253 ms 8 * * * 9 * * * 10 * * * ^C If I let it, this goes on until the end of time. It never seems to reach a destination. Is this normal? A friend living in the same town who is also with Virgin Media has a more conventional traceroute output: 7 hops to google.co.uk, all of which send the ICMP TIME_EXCEEDED response. The obvious fix – rebooting the router – doesn’t seem to help. As far as I can tell, the WiFi connection is stable (I can always ping the router) so the problem is further downstream. I’ve tried using an alternative DNS before (OpenDNS) but if anything, this made things worse. In fact, it made all Google services nigh unreachable.

  Read the article

• DVD ROM is not working

  - by Cyril N.

  (note: I don't know in which StackExchange site to put this question, I'll thank the moderator that will move it to a more appropriate place, if there is a S.E. available for my question). I have a DVD RW drive that is well listed in the bios, and if no CD is in, it is also present in the "My Computer" of my Fedora 16. But when I put a disc on it, the icon disapear from "My Computer", and I can not do anything with this ! (Like erasing a RW disc). I'd like to boot a Fedora 17 Live CD image. I burned it on an other computer but when I try to run it in bios, nothing is done and I'm redirected to Grub of my HD. The command cdrecord -scanbus shows this : wodim: Warning: controller returns wrong size for CD capabilities page. wodim: Cannot get CD capabilities data. 6,1,0 601) 'HD-DT%ST' 'DVD%RAM G@22NP20' '1&04' Removable CD-ROM And when I try to mount manually the disc, I got this error : mount: block device /dev/sr0 is write-protected, mounting read-only mount: /dev/sr0: can't read superblock Here's a paste of dmesg | grep sr0 : [ 5.161265] sr0: scsi-1 drive [ 5.161621] sr 6:0:1:0: Attached scsi CD-ROM sr0 [ 834.545978] sr0: Hmm, seems the drive doesn't support multisession CD's [ 841.731194] sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 842.021640] sr 6:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 842.021652] sr 6:0:1:0: [sr0] Sense Key : Aborted Command [current] [ 842.021662] sr 6:0:1:0: [sr0] Add. Sense: No additional sense information [ 842.021672] sr 6:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00 [ 842.021688] end_request: I/O error, dev sr0, sector 0 [ 842.021697] Buffer I/O error on device sr0, logical block 0 [ 842.023715] sr 6:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 843.048203] sr 6:0:1:0: [sr0] Sense Key : Aborted Command [current] [ 843.048211] sr 6:0:1:0: [sr0] Add. Sense: No additional sense information [ 843.048219] sr 6:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 843.048234] end_request: I/O error, dev sr0, sector 0 [ 843.048274] EXT4-fs (sr0): unable to read superblock [ 843.063155] sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 843.075904] sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 843.220512] sr 6:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 843.220522] sr 6:0:1:0: [sr0] Sense Key : Aborted Command [current] [ 843.220530] sr 6:0:1:0: [sr0] Add. Sense: No additional sense information [ 843.220538] sr 6:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 843.220553] end_request: I/O error, dev sr0, sector 0 [ 843.220609] FAT-fs (sr0): unable to read boot sector The lines from Sense Key .. (line 6) to DRIVER_SENSE (line 11) are repeating a lot. I then changed my DVD player with an other spare one I had, and the disc didn't boot neither. I then changed the IDE cable, but still no success. What can I do to make it work? Thanks for your help.

  Read the article

• PPTP VPN Not Working - Peer failed CHAP authentication, PTY read or GRE write failed

  - by armani

  Brand-new install of CentOS 6.3. Followed this guide: http://www.members.optushome.com.au/~wskwok/poptop_ads_howto_1.htm And I got PPTPd running [v1.3.4]. I got the VPN to authenticate users against our Active Directory using winbind, smb, etc. All my tests to see if I'm still authenticated to the AD server pass ["kinit -V [email protected]", "smbclient", "wbinfo -t"]. VPN users were able to connect for like . . . an hour. I tried connecting from my Android phone using domain credentials and saw that I got an IP allocated for internal VPN users [which I've since changed the range, but even setting it back to the initial doesn't work]. Ever since then, no matter what settings I try, I pretty much consistently get this in my /var/log/messages [and the VPN client fails]: [root@vpn2 ~]# tail /var/log/messages Aug 31 15:57:22 vpn2 pppd[18386]: pppd 2.4.5 started by root, uid 0 Aug 31 15:57:22 vpn2 pppd[18386]: Using interface ppp0 Aug 31 15:57:22 vpn2 pppd[18386]: Connect: ppp0 <--> /dev/pts/1 Aug 31 15:57:22 vpn2 pptpd[18385]: GRE: Bad checksum from pppd. Aug 31 15:57:24 vpn2 pppd[18386]: Peer armaniadm failed CHAP authentication Aug 31 15:57:24 vpn2 pppd[18386]: Connection terminated. Aug 31 15:57:24 vpn2 pppd[18386]: Exit. Aug 31 15:57:24 vpn2 pptpd[18385]: GRE: read(fd=6,buffer=8059660,len=8196) from PTY failed: status = -1 error = Input/output error, usually caused by unexpected termination of pppd, check option syntax and pppd logs Aug 31 15:57:24 vpn2 pptpd[18385]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7) Aug 31 15:57:24 vpn2 pptpd[18385]: CTRL: Client 208.54.86.242 control connection finished Now before you go blaming the firewall [all other forum posts I find seem to go there], this VPN server is on our DMZ network. We're using a Juniper SSG-5 Gateway, and I've assigned a WAN IP to the VPN box itself, zoned into the DMZ zone. Then, I have full "Any IP / Any Protocol" open traffic rules between DMZ<--Untrust Zone, and DMZ<--Trust Zone. I'll limit this later to just the authenticating traffic it needs, but for now I think we can rule out the firewall blocking anything. Here's my /etc/pptpd.conf [omitting comments]: option /etc/ppp/options.pptpd logwtmp localip [EXTERNAL_IP_ADDRESS] remoteip [ANOTHER_EXTERNAL_IP_ADDRESS, AND HAVE TRIED AN ARBITRARY GROUP LIKE 5.5.0.0-100] Here's my /etc/ppp/options.pptpd.conf [omitting comments]: name pptpd refuse-pap refuse-chap refuse-mschap require-mschap-v2 require-mppe-128 ms-dns 192.168.200.42 # This is our internal domain controller ms-wins 192.168.200.42 proxyarp lock nobsdcomp novj novjccomp nologfd auth nodefaultroute plugin winbind.so ntlm_auth-helper "/usr/bin/ntlm_auth --helper-protocol=ntlm-server-1" Any help is GREATLY appreciated. I can give you any more info you need to know, and it's a new test server, so I can perform any tests/reboots required to get it up and going. Thanks a ton.

  Read the article

• Windows 2003 Storage Server Hanging on Large File Transfers

  - by user25272

  In one of our offices we have a Dell PowerVault 745N NAS device which acts as the main file server. Its running 32bit Windows 2003 Storage Server SP2 with 3GB RAM. The server holds around 60 users HOME folders, which are mapped via AD. The office clients are a mix of XP SP3, Vista and Windows 7. Occasionally the server will completely hang when transferring large files. When the hang happens the console becomes unresponsive with only the mouse active and blank wallpaper. Sometimes stopping the copy frees the server, sometimes not. The hanging can last around 20 minutes. During this time other servers also become unresponsive with blank wallpaper at the console. If you do manage to get onto another server the taskbar and run commands are unresponsive. This also transcends to the client computers sometimes with explorer crashing. I'm guessing this is due to the HOME folder mapping. Eventually the NAS server with free up and everything will be back to normal. The server is configured as follows: PERC 4/DC DATA 2 - 12 SCSI HDD - RAID5 SHADOWCOPY 2 SCSI HDD - RAID1 CERC SATA DATA 11 4 SATA HDD - RAID5 OS 4 SATA HDD - RAID5 All the drivers and firmware is up to date. I've been through all the diagnostics with Dell and the hardware has come up clean including full HDD tests on the arrays. The server has NOD32 installed as the AV, but the hanging happens when it is uninstalled. There are no errors in the event log when this happens and we don't have any errors logged on any of our ProCurve switches. DNS is fine on the domain and AD from what I can tell is running happily. There are no DFS or NFS shares setup either. All the shares are standard Windows. I've unchecked the allow the computer to turn off this device to save power box under Power Management on the NIC. "Set Link Speed and Duplex to Auto-negotiate 1000 " Increased Receive Descriptors buffer from 256 to 352 (reserves more CPU resource for handling data) I've run network traces using network monitor and have found the following: 417 8.078125 {SMB:192, NbtSS:25, TCP:24, IPv4:23} 192.168.2.244 192.168.5.35 SMB SMB:R; Nt Create Andx - NT Status: System - Error, Code = (52) STATUS_OBJECT_NAME_NOT_FOUND I've tried different cabling; NICs and switch ports all with the same result. Transferring files from other servers on the domain is fine. All I haven't done is run CHKDSK on the drives to look for any file system errors. On the Vista clients I have also run netsh interface tcp set global autotuning=disabled with no result. Could it be that the server has a faulty drive or that the I/O is too much for it to handle? Any ideas why would the hang cause issues with the other servers on the LAN? Many Thanks.

  Read the article

• How to resolve `bootpd` crashing constantly on Mac OS X 10.6.4 Snow Leopard Server?

  - by morgant

  I've got a Mac Pro running Mac OS X 10.6.4 Snow Leopard Server and it's recently started getting numerous 'kNetworkError's in Server Admin.app when viewing services. It's acting as a gateway w/NAT and has been so for quite some time. There is one glaring issue, bootpd crashes all the time with the following errors in `/var/log/system.log/: Aug 12 16:54:59 servername bootpd[3572]: server starting Aug 12 16:54:59 servername bootpd[3572]: server name servername.domain.tld Aug 12 16:54:59 servername bootpd[3572]: interface en0: ip 10.0.1.9 mask 255.255.255.0 Aug 12 16:54:59 servername bootpd[3572]: bsdpd: re-reading configuration Aug 12 16:54:59 servername bootpd[3572]: bsdpd: shadow file size will be set to 48 megabytes Aug 12 16:54:59 servername bootpd[3572]: bsdpd: age time 00:15:00 Aug 12 16:54:59 servername bootpd[3572]: [3572] detected buffer overflow Aug 12 16:54:59 servername com.apple.launchd[1] (com.apple.bootpd[3572]): Job appears to have crashed: Abort trap Aug 12 16:54:59 servername com.apple.ReportCrash.Root[3571]: 2010-08-12 16:54:59.828 ReportCrash[3571:2807] Saved crash report for bootpd[3572] version ??? (???) to /Library/Logs/DiagnosticReports/bootpd_2010-08-12-165459_localhost.crash It is correctly configured to serve DHCP through en1 (not en0), the "LAN" port. This happens even with no hardware (even switches) connected to the "LAN" port. There are no DHCP clients listed. Oddly, the "Overview" shows 1 static map, but nothing is listed under "Static Maps" and there are no "Computers" in Open Directory. /var/db/dhcp_leases is empty. /Library/Logs/DiagnosticReports/bootpd_2010-08-12-165459_localhost.crash is as follows: Process: bootpd [3572] Path: /usr/libexec/bootpd Identifier: bootpd Version: ??? (???) Code Type: X86-64 (Native) Parent Process: launchd [1] Date/Time: 2010-08-12 16:54:59.713 -0400 OS Version: Mac OS X Server 10.6.4 (10F569) Report Version: 6 Exception Type: EXC_CRASH (SIGABRT) Exception Codes: 0x0000000000000000, 0x0000000000000000 Crashed Thread: 0 Dispatch queue: com.apple.main-thread Application Specific Information: __abort() called Thread 0 Crashed: Dispatch queue: com.apple.main-thread 0 libSystem.B.dylib 0x00007fff803c13d6 __kill + 10 1 libSystem.B.dylib 0x00007fff80461913 __abort + 103 2 libSystem.B.dylib 0x00007fff80456157 mach_msg_receive + 0 3 libSystem.B.dylib 0x00007fff803b92cf __strncpy_chk + 14 4 bootpd 0x0000000100014e5d PLCache_read + 782 5 bootpd 0x0000000100004a3d BSDPClients_init + 68 6 bootpd 0x00000001000053b5 bsdp_init + 2396 7 bootpd 0x000000010000200b S_update_services + 1228 8 bootpd 0x0000000100002344 S_server_loop + 571 9 bootpd 0x0000000100003963 main + 1766 10 bootpd 0x0000000100000984 start + 52 Thread 0 crashed with X86 Thread State (64-bit): rax: 0x0000000000000000 rbx: 0x00007fff5fbfe220 rcx: 0x00007fff5fbfe218 rdx: 0x0000000000000000 rdi: 0x0000000000000df4 rsi: 0x0000000000000006 rbp: 0x00007fff5fbfe240 rsp: 0x00007fff5fbfe218 r8: 0x0000000000000001 r9: 0x0000000100114280 r10: 0x00007fff803bd412 r11: 0xffffff80002e1680 r12: 0xffffffffffffffff r13: 0x00007fff5fbfe330 r14: 0x00007fff5fbfe33b r15: 0x00007fff7009bec0 rip: 0x00007fff803c13d6 rfl: 0x0000000000000202 cr2: 0x000000010004c000 Any thoughts or suggestions as to resolving this?

  Read the article

• How do you splice out a part of an xvid encoded avi file, with ffmpeg? (no problems with other files

  - by yegor

  Im using the following command, which works for most files, except what seems to be xvid encoded ones /usr/bin/ffmpeg -sameq -i file.avi -ss 00:01:00 -t 00:00:30 -ac 2 -r 25 -copyts output.avi So this should basically splice out 30 seconds of video + audio, starting from 1 minute mark. It does START encoding at the 00:01:00 mark but it goes all the way to the end of the file for some reason, ignoring that I want just 30 seconds. The output looks like this. FFmpeg version git-ecc4bdd, Copyright (c) 2000-2010 the FFmpeg developers built on May 31 2010 04:52:24 with gcc 4.4.3 20100127 (Red Hat 4.4.3-4) configuration: --enable-libx264 --enable-libxvid --enable-libmp3lame --enable-libopenjpeg --enable-libfaac --enable-libvorbis --enable-gpl --enable-nonfree --enable-libxvid --enable-pthreads --enable-libfaad --extra-cflags=-fPIC --enable-postproc --enable-libtheora --enable-libvorbis --enable-shared libavutil 50.15. 2 / 50.15. 2 libavcodec 52.67. 0 / 52.67. 0 libavformat 52.62. 0 / 52.62. 0 libavdevice 52. 2. 0 / 52. 2. 0 libavfilter 1.20. 0 / 1.20. 0 libswscale 0.10. 0 / 0.10. 0 libpostproc 51. 2. 0 / 51. 2. 0 [mpeg4 @ 0x17cf770]Invalid and inefficient vfw-avi packed B frames detected Input #0, avi, from 'file.avi': Metadata: ISFT : VirtualDubMod 1.5.10.2 (build 2540/release) Duration: 00:02:00.00, start: 0.000000, bitrate: 1587 kb/s Stream #0.0: Video: mpeg4, yuv420p, 672x368 [PAR 1:1 DAR 42:23], 25 tbr, 25 tbn, 25 tbc Stream #0.1: Audio: ac3, 48000 Hz, 5.1, s16, 448 kb/s File 'lol6.avi' already exists. Overwrite ? [y/N] y Output #0, avi, to 'lol6.avi': Metadata: ISFT : Lavf52.62.0 Stream #0.0: Video: mpeg4, yuv420p, 672x368 [PAR 1:1 DAR 42:23], q=2-31, 200 kb/s, 25 tbn, 25 tbc Stream #0.1: Audio: mp2, 48000 Hz, 2 channels, s16, 64 kb/s Stream mapping: Stream #0.0 -> #0.0 Stream #0.1 -> #0.1 Press [q] to stop encoding [mpeg4 @ 0x17cf770]Invalid and inefficient vfw-avi packed B frames detected [buffer @ 0x184b610]Buffering several frames is not supported. Please consume all available frames before adding a new one. frame= 1501 fps=104 q=0.0 Lsize= 15612kB time=30.02 bitrate=4259.7kbits/s ts/s video:15303kB audio:235kB global headers:0kB muxing overhead 0.482620% if I convert this file to mp4 for example, and then perform the same action, it works perfectly.

  Read the article

• Getting error while installing mod_wsgi in centos

  - by user825904

  I have reinstalled python with enable shared [root@master mod_wsgi-3.4]# make clean rm -rf .libs rm -f mod_wsgi.o mod_wsgi.la mod_wsgi.lo mod_wsgi.slo mod_wsgi.loT rm -f config.log config.status rm -rf autom4te.cache [root@master mod_wsgi-3.4]# LD_RUN_PATH=/usr/local/lib make apxs -c -I/usr/local/include/python2.7 -DNDEBUG mod_wsgi.c -L/usr/local/lib -L/usr/local/lib/python2.7/config -lpython2.7 -lpthread -ldl -lutil -lm /usr/lib64/apr-1/build/libtool --silent --mode=compile gcc -prefer-pic -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic -Wformat-security -fno-strict-aliasing -DLINUX=2 -D_REENTRANT -D_GNU_SOURCE -pthread -I/usr/include/httpd -I/usr/include/apr-1 -I/usr/include/apr-1 -I/usr/local/include/python2.7 -DNDEBUG -c -o mod_wsgi.lo mod_wsgi.c && touch mod_wsgi.slo In file included from /usr/local/include/python2.7/Python.h:8, from mod_wsgi.c:142: /usr/local/include/python2.7/pyconfig.h:1161:1: warning: "_POSIX_C_SOURCE" redefined In file included from /usr/include/sys/types.h:26, from /usr/include/apr-1/apr-x86_64.h:127, from /usr/include/apr-1/apr.h:19, from /usr/include/httpd/ap_config.h:25, from /usr/include/httpd/httpd.h:43, from mod_wsgi.c:34: /usr/include/features.h:162:1: warning: this is the location of the previous definition In file included from /usr/local/include/python2.7/Python.h:8, from mod_wsgi.c:142: /usr/local/include/python2.7/pyconfig.h:1183:1: warning: "_XOPEN_SOURCE" redefined In file included from /usr/include/sys/types.h:26, from /usr/include/apr-1/apr-x86_64.h:127, from /usr/include/apr-1/apr.h:19, from /usr/include/httpd/ap_config.h:25, from /usr/include/httpd/httpd.h:43, from mod_wsgi.c:34: /usr/include/features.h:164:1: warning: this is the location of the previous definition mod_wsgi.c: In function ‘wsgi_server_group’: mod_wsgi.c:991: warning: unused variable ‘value’ mod_wsgi.c: In function ‘Log_isatty’: mod_wsgi.c:1665: warning: unused variable ‘result’ mod_wsgi.c: In function ‘Log_writelines’: mod_wsgi.c:1802: warning: unused variable ‘msg’ mod_wsgi.c: In function ‘Adapter_output’: mod_wsgi.c:3087: warning: unused variable ‘n’ mod_wsgi.c: In function ‘Adapter_file_wrapper’: mod_wsgi.c:4138: warning: unused variable ‘result’ mod_wsgi.c: In function ‘wsgi_python_term’: mod_wsgi.c:5850: warning: unused variable ‘tstate’ mod_wsgi.c:5849: warning: unused variable ‘interp’ mod_wsgi.c: In function ‘wsgi_python_child_init’: mod_wsgi.c:7050: warning: unused variable ‘l’ mod_wsgi.c:6948: warning: unused variable ‘interp’ mod_wsgi.c: In function ‘wsgi_add_import_script’: mod_wsgi.c:7701: warning: unused variable ‘error’ mod_wsgi.c: In function ‘wsgi_add_handler_script’: mod_wsgi.c:8179: warning: unused variable ‘dconfig’ mod_wsgi.c:8178: warning: unused variable ‘sconfig’ mod_wsgi.c: In function ‘wsgi_hook_handler’: mod_wsgi.c:9375: warning: suggest parentheses around assignment used as truth value mod_wsgi.c:9377: warning: suggest parentheses around assignment used as truth value mod_wsgi.c:9379: warning: suggest parentheses around assignment used as truth value mod_wsgi.c:9383: warning: suggest parentheses around assignment used as truth value mod_wsgi.c:9403: warning: suggest parentheses around assignment used as truth value mod_wsgi.c:9405: warning: suggest parentheses around assignment used as truth value mod_wsgi.c:9408: warning: suggest parentheses around assignment used as truth value mod_wsgi.c: In function ‘wsgi_daemon_worker’: mod_wsgi.c:10819: warning: unused variable ‘duration’ mod_wsgi.c:10818: warning: unused variable ‘start’ mod_wsgi.c: In function ‘wsgi_hook_daemon_handler’: mod_wsgi.c:13172: warning: unused variable ‘i’ mod_wsgi.c:13170: warning: unused variable ‘elts’ mod_wsgi.c:13169: warning: unused variable ‘head’ mod_wsgi.c: At top level: mod_wsgi.c:8142: warning: ‘wsgi_set_user_authoritative’ defined but not used mod_wsgi.c:15251: warning: ‘wsgi_hook_check_user_id’ defined but not used /usr/lib64/apr-1/build/libtool --silent --mode=link gcc -o mod_wsgi.la -rpath /usr/lib64/httpd/modules -module -avoid-version mod_wsgi.lo -L/usr/local/lib -L/usr/local/lib/python2.7/config -lpython2.7 -lpthread -ldl -lutil -lm

  Read the article

• How do you splice out a part of an xvid encoded avi file, with ffmpeg? (no problems with other files)

  - by user11955

  Im using the following command, which works for most files, except what seems to be xvid encoded ones /usr/bin/ffmpeg -sameq -i file.avi -ss 00:01:00 -t 00:00:30 -ac 2 -r 25 -copyts output.avi So this should basically splice out 30 seconds of video + audio, starting from 1 minute mark. It does START encoding at the 00:01:00 mark but it goes all the way to the end of the file for some reason, ignoring that I want just 30 seconds. The output looks like this. FFmpeg version git-ecc4bdd, Copyright (c) 2000-2010 the FFmpeg developers built on May 31 2010 04:52:24 with gcc 4.4.3 20100127 (Red Hat 4.4.3-4) configuration: --enable-libx264 --enable-libxvid --enable-libmp3lame --enable-libopenjpeg --enable-libfaac --enable-libvorbis --enable-gpl --enable-nonfree --enable-libxvid --enable-pthreads --enable-libfaad --extra-cflags=-fPIC --enable-postproc --enable-libtheora --enable-libvorbis --enable-shared libavutil 50.15. 2 / 50.15. 2 libavcodec 52.67. 0 / 52.67. 0 libavformat 52.62. 0 / 52.62. 0 libavdevice 52. 2. 0 / 52. 2. 0 libavfilter 1.20. 0 / 1.20. 0 libswscale 0.10. 0 / 0.10. 0 libpostproc 51. 2. 0 / 51. 2. 0 [mpeg4 @ 0x17cf770]Invalid and inefficient vfw-avi packed B frames detected Input #0, avi, from 'file.avi': Metadata: ISFT : VirtualDubMod 1.5.10.2 (build 2540/release) Duration: 00:02:00.00, start: 0.000000, bitrate: 1587 kb/s Stream #0.0: Video: mpeg4, yuv420p, 672x368 [PAR 1:1 DAR 42:23], 25 tbr, 25 tbn, 25 tbc Stream #0.1: Audio: ac3, 48000 Hz, 5.1, s16, 448 kb/s File 'lol6.avi' already exists. Overwrite ? [y/N] y Output #0, avi, to 'lol6.avi': Metadata: ISFT : Lavf52.62.0 Stream #0.0: Video: mpeg4, yuv420p, 672x368 [PAR 1:1 DAR 42:23], q=2-31, 200 kb/s, 25 tbn, 25 tbc Stream #0.1: Audio: mp2, 48000 Hz, 2 channels, s16, 64 kb/s Stream mapping: Stream #0.0 -> #0.0 Stream #0.1 -> #0.1 Press [q] to stop encoding [mpeg4 @ 0x17cf770]Invalid and inefficient vfw-avi packed B frames detected [buffer @ 0x184b610]Buffering several frames is not supported. Please consume all available frames before adding a new one. frame= 1501 fps=104 q=0.0 Lsize= 15612kB time=30.02 bitrate=4259.7kbits/s ts/s video:15303kB audio:235kB global headers:0kB muxing overhead 0.482620% if I convert this file to mp4 for example, and then perform the same action, it works perfectly.

  Read the article

• Vim digraphs is not working

  - by Hauleth

  I've tried to input digraphs in Vim (without vi compatibility), and unfortunately I can't. After using ControlKP * it should input big greek pi letter. I've also tried using PBS * with :set digraph, but no success either. My gvim --version output: VIM - Vi IMproved 7.3 (2010 Aug 15, compiled Oct 23 2012 18:42:18) Included patches: 1-712 Compiled by ArchLinux Big version with GTK2 GUI. Features included (+) or not (-): +arabic +autocmd +balloon_eval +browse ++builtin_terms +byte_offset +cindent +clientserver +clipboard +cmdline_compl +cmdline_hist +cmdline_info +comments +conceal +cryptv +cscope +cursorbind +cursorshape +dialog_con_gui +diff +digraphs +dnd -ebcdic +emacs_tags +eval +ex_extra +extra_search +farsi +file_in_path +find_in_path +float +folding -footer +fork() +gettext -hangul_input +iconv +insert_expand +jumplist +keymap +langmap +libcall +linebreak +lispindent +listcmds +localmap +lua +menu +mksession +modify_fname +mouse +mouseshape +mouse_dec +mouse_gpm -mouse_jsbterm +mouse_netterm +mouse_sgr -mouse_sysmouse +mouse_urxvt +mouse_xterm +multi_byte +multi_lang -mzscheme +netbeans_intg +path_extra +perl +persistent_undo +postscript +printer -profile +python -python3 +quickfix +reltime +rightleft +ruby +scrollbind +signs +smartindent -sniff +startuptime +statusline -sun_workshop +syntax +tag_binary +tag_old_static -tag_any_white -tcl +terminfo +termresponse +textobjects +title +toolbar +user_commands +vertsplit +virtualedit +visual +visualextra +viminfo +vreplace +wildignore +wildmenu +windows +writebackup +X11 -xfontset +xim +xsmp_interact +xterm_clipboard -xterm_save system vimrc file: "/etc/vimrc" user vimrc file: "$HOME/.vimrc" user exrc file: "$HOME/.exrc" system gvimrc file: "/etc/gvimrc" user gvimrc file: "$HOME/.gvimrc" system menu file: "$VIMRUNTIME/menu.vim" fall-back for $VIM: "/usr/share/vim" Compilation: gcc -c -I. -Iproto -DHAVE_CONFIG_H -DFEAT_GUI_GTK -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng15 -I/usr/local/include -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1 Linking: gcc -L. -Wl,-O1,--sort-common,--as-needed,-z,relro -rdynamic -Wl,-export-dynamic -Wl,-E -Wl,-rpath,/usr/lib/perl5/core_perl/CORE -Wl,-O1,--sort-common,--as-needed,-z,relro -L/usr/local/lib -Wl,--as-needed -o vim -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgio-2.0 -lpangoft2-1.0 -lpangocairo-1.0 -lgdk_pixbuf-2.0 -lcairo -lpango-1.0 -lfreetype -lfontconfig -lgobject-2.0 -lglib-2.0 -lSM -lICE -lXt -lX11 -lXdmcp -lSM -lICE -lm -lncurses -lnsl -lacl -lattr -lgpm -ldl -L/usr/lib -llua -Wl,-E -Wl,-rpath,/usr/lib/perl5/core_perl/CORE -Wl,-O1,--sort-common,--as-needed,-z,relro -fstack-protector -L/usr/local/lib -L/usr/lib/perl5/core_perl/CORE -lperl -lnsl -ldl -lm -lcrypt -lutil -lpthread -lc -L/usr/lib/python2.7/config -lpython2.7 -lpthread -ldl -lutil -lm -Xlinker -export-dynamic -lruby -lpthread -lrt -ldl -lcrypt -lm -L/usr/lib Can you tell me how to get my ControlK digraphs work? EDIT: Output of :verbose set enc? fenc? is: encoding=utf-8 Last set from ~/.vimrc fileencoding=

  Read the article

• turn off disable the performance cache

  - by jessie

  OK I run a streaming website and my CMS is giving me an error when uploading videos "Failed To Find Flength File" ok so I did some research. The answer I got from the coder was below. I did do all that, but the only thing I could not do is turn off what he refers to as performance cache, talked about in the last sentence... I am on a Cent OS Assuming the script is set up properly, you are probably dealing with some kind of write-caching. Some servers perform write-caching which prevents writing out the flength file or the entire CGITemp file during the upload. The flength file or the CGITemp file do not actually hit the disk until the upload is complete, making it worthless for reporting on progress during the upload. This may be fixed using a .htaccess file assuming your host supports them. Here is a link to an excellent tutorial on using .htaccess files. I strongly recommend giving it a quick read before attempting to install your own .htaccess file. 1. A mod_security module for Apache. To fix it just create a file called .htaccess (that's a period followed by "htaccess") and put the following lines in that file. Upload the file into the directory where the Uber-Uploader CGI ".pl" scripts resides, or in some directory above it (like your server's DOCUMENT_ROOT, i.e. the top-level of your webspace). htaccess files must be uploaded as ASCII mode, not BINARY. You may need to CHMOD the htaccess file to 644 or (RW-R--R--). # Turn off mod_security filtering. SecFilterEngine Off # The below probably isn't needed, # but better safe than sorry. SecFilterScanPOST Off If the above method does not work, try putting the following lines into the file SetEnvIfNoCase Content-Type \ "^multipart/form-data;" "MODSEC_NOPOSTBUFFERING=Do not buffer file uploads" mod_gzip_on No 2. "Performance Cache" enabled on OS X SERVER. If you're running OS X Server and the progress bar isn't working, it could be because of "performance caching." Apparently if ANY of your hosted sites are using performance caching, then by default, all sites (domains) will attempt to. The fix then is to disable the performance cache on all hosted sites.

  Read the article

• SQLS Timeouts - High Reads in Profiler

  - by lb01

  I've audited a SQLS2008 server with Profiler for one day.. the overhead didn't seem to trouble this new client my company has. They are using a legacy VB6 application as a front-end. They're experiencing timeouts once SQLS RAM usage is high. The server is currently running x64 sqls2008 on a VM with nearly 9 GB of RAM. SQL Server's 'max server memory option' is currently set to 6GB. I've put the results of the trace in a table and queried them using this query. SELECT TextData, ApplicationName, Reads FROM [TraceWednesday] WHERE textdata is not null and EventClass = 12 GROUP BY TextData, ApplicationName, Reads ORDER BY Reads DESC As I expected, some values are very high. Top Reads, in pages. 2504188 1965910 1445636 1252433 1239108 1210153 1088580 1072725 Am I correct in thinking that the top one (2504188 pages) is 20033504 KB, which then is roughly ~20'000 MB, 20GB? These queries are often executed and can take quite some time to run. Eventually RAM is used up because of the cache fattening, and timeouts occur once SQL cannot 'splash' pages in the buffer pool as much. Costs go up. Am I correct in my understanding? I've read that I should tune the associated T-SQL and create appropriate indices. Obviously cutting down the I/O would make SQL Server use less RAM. OR, maybe it might just slow down the process of chewing up the whole RAM. If a lot less pages are read, maybe it'll all run much better even when usage is high? (less time swapping, etc.) Currently, our only option is to restart SQL once a week when RAM usage is high, suddenly the timeouts disappear. SQL breathes again. I'm sure lots of DBAs have been in this situation.. I'm asking before I start digging out all of the bad T-SQL and put indices here and there, is there is something else I can do? Any advice except from what I know (not much yet..) Much appreciated. Leo.

  Read the article

• Hyper-V Ubuntu Networking Problems Copying Large Amounts of Data

  - by Anonymous

  I am trying to copy a large amount (about 50 GB) of data over my network from a Hyper-V-hosted virtual machine running Ubuntu 11.04 (Natty Narwhal) to another (non-virtual) Ubuntu host that I plan to use for testing upgrades to one of our web applications. The problem I am having is with the virtual machine, which I shall refer to in what follows as "source.host". This machine is running 64-bit Ubuntu Server with the 2.6.38-8-server kernel and the Microsoft Linux Integration Components for Hyper-V kernel modules (hv_utils, hv_timesource, hv_netvsc, hv_blkvsc, hv_storvsc, and hv_vmbus) loaded. It uses a Hyper-V "synthetic network adapter" for its networking interface. To do the copy, I log on to the machine with the data and run the following commands (Call the remote machine "destination.host".): $ cd /path/to/data $ tar -cvf - datafolder/ | ssh [email protected] "cat > ~/data.tar" This runs for a while and then suddenly stops after transferring somewhere from 2-6 GB. The terminal on the source.host machine displays a Write failed: broken pipe error. The odd part is this: after this occurs, the "source.host" machine is no longer able to talk to the rest of the network. I cannot ping any other hosts on the network from the "source.host" machine, and I cannot ping the "source.host" machine from any other host on the network. I am equally unable to access the any of the web services hosted on "source.host". Running ifconfig on "source.host" shows the network adapter to be up and running as usual with the correct IP address and everything. I tried restarting the networking service with $ /etc/init.d/networking restart but the problem does not go away. Restarting the machine makes it capable of talking to the network again -- it can ping and be pinged by other hosts, and the web services are also accessible and usable as normal -- but attempting the copy operation again results in the same failure, requiring another restart. As an experiment, I tried replacing the tar -- ssh pipeline above with a straight scp: $ scp -r datafolder/ [email protected]:~ but to no avail Thinking that the issue might have to do with the kernel packet-send buffers filling up, I tried increasing the buffer size to 12 MB (up from the 128 KB default) with # echo 12582911 > /proc/sys/net/core/wmem_max but this also had no effect. I'm guessing at this point that it might be a problem with the Microsoft synthetic network driver, but I don't really know. Does anyone have any suggestions? Thank you very much in advance!

  Read the article

• How to store data on a machine whose power gets cut at random

  - by Sevas

  I have a virtual machine (Debian) running on a physical machine host. The virtual machine acts as a buffer for data that it frequently receives over the local network (the period for this data is 0.5s, so a fairly high throughput). Any data received is stored on the virtual machine and repeatedly forwarded to an external server over UDP. Once the external server acknowledges (over UDP) that it has received a data packet, the original data is deleted from the virtual machine and not sent to the external server again. The internet connection that connects the VM and the external server is unreliable, meaning it could be down for days at a time. The physical machine that hosts the VM gets its power cut several times per day at random. There is no way to tell when this is about to happen and it is not possible to add a UPS, a battery, or a similar solution to the system. Originally, the data was stored on a file-based HSQLDB database on the virtual machine. However, the frequent power cuts eventually cause the database script file to become corrupted (not at the file system level, i.e. it is readable, but HSQLDB can't make sense of it), which leads to my question: How should data be stored in an environment where power cuts can and do happen frequently? One option I can think of is using flat files, saving each packet of data as a file on the file system. This way if a file is corrupted due to loss of power, it can be ignored and the rest of the data remains intact. This poses a few issues however, mainly related to the amount of data likely being stored on the virtual machine. At 0.5s between each piece of data, 1,728,000 files will be generated in 10 days. This at least means using a file system with an increased number of inodes to store this data (the current file system setup ran out of inodes at ~250,000 messages and 30% disk space used). Also, it is hard (not impossible) to manage. Are there any other options? Are there database engines that run on Debian that would not get corrupted by power cuts? Also, what file system should be used for this? ext3 is what is used at the moment. The software that runs on the virtual machine is written using Java 6, so hopefully the solution would not be incompatible.

  Read the article

• SQLS Timeouts - High Reads in Profiler

  - by lb01

  Hi I've audited a SQLS2008 server with Profiler for one day.. the overhead didn't seem to trouble this new client my company has. They are using a legacy VB6 application as a front-end. They're experiencing timeouts once SQLS RAM usage is high. The server is currently running x64 sqls2008 on a VM with nearly 9 GB of RAM. SQL Server's 'max server memory option' is currently set to 6GB. I've put the results of the trace in a table and queried them using this query. SELECT TextData, ApplicationName, Reads FROM [TraceWednesday] WHERE textdata is not null and EventClass = 12 GROUP BY TextData, ApplicationName, Reads ORDER BY Reads DESC As I expected, some values are very high. Top Reads, in pages. 2504188 1965910 1445636 1252433 1239108 1210153 1088580 1072725 Am I correct in thinking that the top one (2504188 pages) is 20033504 KB, which then is roughly ~20'000 MB, 20GB? These queries are often executed and can take quite some time to run. Eventually RAM is used up because of the cache fattening, and timeouts occur once SQL cannot 'splash' pages in the buffer pool as much. Costs go up. Am I correct in my understanding? I've read that I should tune the associated T-SQL and create appropriate indices. Obviously cutting down the I/O would make SQL Server use less RAM. OR, maybe it might just slow down the process of chewing up the whole RAM. If a lot less pages are read, maybe it'll all run much better even when usage is high? (less time swapping, etc.) Currently, our only option is to restart SQL once a week when RAM usage is high, suddenly the timeouts disappear. SQL breathes again. I'm sure lots of DBAs have been in this situation.. I'm asking before I start digging out all of the bad T-SQL and put indices here and there, is there is something else I can do? Any advice except from what I know (not much yet..) Much appreciated. Leo.

  Read the article

• Unable to install Xdebug

  - by burnt1ce

  I've registered xdebug in php.ini (as per http://xdebug.org/docs/install) but it's not showing up when i run "php -m" or when i get a test page to run "phpinfo()". I've just installed the latest version of XAMPP. Can anyone provide any suggestions in getting xdebug to show up? This is what i get when i run phpinfo(). **PHP Version 5.3.1** System Windows NT ANDREW_LAPTOP 5.1 build 2600 (Windows XP Professional Service Pack 3) i586 Build Date Nov 20 2009 17:20:57 Compiler MSVC6 (Visual C++ 6.0) Architecture x86 Configure Command cscript /nologo configure.js "--enable-snapshot-build" Server API Apache 2.0 Handler Virtual Directory Support enabled Configuration File (php.ini) Path no value Loaded Configuration File C:\xampp\php\php.ini Scan this dir for additional .ini files (none) Additional .ini files parsed (none) PHP API 20090626 PHP Extension 20090626 Zend Extension 220090626 Zend Extension Build API220090626,TS,VC6 PHP Extension Build API20090626,TS,VC6 Debug Build no Thread Safety enabled Zend Memory Manager enabled Zend Multibyte Support disabled IPv6 Support enabled Registered PHP Streams https, ftps, php, file, glob, data, http, ftp, compress.zlib, compress.bzip2, phar, zip Registered Stream Socket Transports tcp, udp, ssl, sslv3, sslv2, tls Registered Stream Filters convert.iconv.*, string.rot13, string.toupper, string.tolower, string.strip_tags, convert.*, consumed, dechunk, zlib.*, bzip2.* This program makes use of the Zend Scripting Language Engine: Zend Engine v2.3.0, Copyright (c) 1998-2009 Zend Technologies PHP Credits Configuration apache2handler Apache Version Apache/2.2.14 (Win32) DAV/2 mod_ssl/2.2.14 OpenSSL/0.9.8l mod_autoindex_color PHP/5.3.1 mod_apreq2-20090110/2.7.1 mod_perl/2.0.4 Perl/v5.10.1 Apache API Version 20051115 Server Administrator postmaster@localhost Hostname:Port localhost:80 Max Requests Per Child: 0 - Keep Alive: on - Max Per Connection: 100 Timeouts Connection: 300 - Keep-Alive: 5 Virtual Server No Server Root C:/xampp/apache Loaded Modules core mod_win32 mpm_winnt http_core mod_so mod_actions mod_alias mod_asis mod_auth_basic mod_auth_digest mod_authn_default mod_authn_file mod_authz_default mod_authz_groupfile mod_authz_host mod_authz_user mod_cgi mod_dav mod_dav_fs mod_dav_lock mod_dir mod_env mod_headers mod_include mod_info mod_isapi mod_log_config mod_mime mod_negotiation mod_rewrite mod_setenvif mod_ssl mod_status mod_autoindex_color mod_php5 mod_perl mod_apreq2 Directive Local Value Master Value engine 1 1 last_modified 0 0 xbithack 0 0 Apache Environment Variable Value MIBDIRS C:/xampp/php/extras/mibs MYSQL_HOME C:\xampp\mysql\bin OPENSSL_CONF C:/xampp/apache/bin/openssl.cnf PHP_PEAR_SYSCONF_DIR C:\xampp\php PHPRC C:\xampp\php TMP C:\xampp\tmp HTTP_HOST localhost HTTP_CONNECTION keep-alive HTTP_USER_AGENT Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/533.2 (KHTML, like Gecko) Chrome/5.0.342.8 Safari/533.2 HTTP_CACHE_CONTROL max-age=0 HTTP_ACCEPT application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5 HTTP_ACCEPT_ENCODING gzip,deflate,sdch HTTP_ACCEPT_LANGUAGE en-US,en;q=0.8 HTTP_ACCEPT_CHARSET ISO-8859-1,utf-8;q=0.7,*;q=0.3 PATH C:\Documents and Settings\Andrew\Local Settings\Application Data\Google\Chrome\Application;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Common Files\DivX Shared\;C:\Program Files\WiTopia.Net\bin SystemRoot C:\WINDOWS COMSPEC C:\WINDOWS\system32\cmd.exe PATHEXT .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH WINDIR C:\WINDOWS SERVER_SIGNATURE <address>Apache/2.2.14 (Win32) DAV/2 mod_ssl/2.2.14 OpenSSL/0.9.8l mod_autoindex_color PHP/5.3.1 mod_apreq2-20090110/2.7.1 mod_perl/2.0.4 Perl/v5.10.1 Server at localhost Port 80</address> SERVER_SOFTWARE Apache/2.2.14 (Win32) DAV/2 mod_ssl/2.2.14 OpenSSL/0.9.8l mod_autoindex_color PHP/5.3.1 mod_apreq2-20090110/2.7.1 mod_perl/2.0.4 Perl/v5.10.1 SERVER_NAME localhost SERVER_ADDR 127.0.0.1 SERVER_PORT 80 REMOTE_ADDR 127.0.0.1 DOCUMENT_ROOT C:/xampp/htdocs SERVER_ADMIN postmaster@localhost SCRIPT_FILENAME C:/xampp/htdocs/test.php REMOTE_PORT 3275 GATEWAY_INTERFACE CGI/1.1 SERVER_PROTOCOL HTTP/1.1 REQUEST_METHOD GET QUERY_STRING no value REQUEST_URI /test.php SCRIPT_NAME /test.php HTTP Headers Information HTTP Request Headers HTTP Request GET /test.php HTTP/1.1 Host localhost Connection keep-alive User-Agent Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/533.2 (KHTML, like Gecko) Chrome/5.0.342.8 Safari/533.2 Cache-Control max-age=0 Accept application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5 Accept-Encoding gzip,deflate,sdch Accept-Language en-US,en;q=0.8 Accept-Charset ISO-8859-1,utf-8;q=0.7,*;q=0.3 HTTP Response Headers X-Powered-By PHP/5.3.1 Keep-Alive timeout=5, max=80 Connection Keep-Alive Transfer-Encoding chunked Content-Type text/html bcmath BCMath support enabled Directive Local Value Master Value bcmath.scale 0 0 bz2 BZip2 Support Enabled Stream Wrapper support compress.bz2:// Stream Filter support bzip2.decompress, bzip2.compress BZip2 Version 1.0.5, 10-Dec-2007 calendar Calendar support enabled com_dotnet COM support enabled DCOM support disabled .Net support enabled Directive Local Value Master Value com.allow_dcom 0 0 com.autoregister_casesensitive 1 1 com.autoregister_typelib 0 0 com.autoregister_verbose 0 0 com.code_page no value no value com.typelib_file no value no value Core PHP Version 5.3.1 Directive Local Value Master Value allow_call_time_pass_reference On On allow_url_fopen On On allow_url_include Off Off always_populate_raw_post_data Off Off arg_separator.input & & arg_separator.output &amp; &amp; asp_tags Off Off auto_append_file no value no value auto_globals_jit On On auto_prepend_file no value no value browscap C:\xampp\php\extras\browscap.ini C:\xampp\php\extras\browscap.ini default_charset no value no value default_mimetype text/html text/html define_syslog_variables Off Off disable_classes no value no value disable_functions no value no value display_errors On On display_startup_errors On On doc_root no value no value docref_ext no value no value docref_root no value no value enable_dl On On error_append_string no value no value error_log no value no value error_prepend_string no value no value error_reporting 22519 22519 exit_on_timeout Off Off expose_php On On extension_dir C:\xampp\php\ext C:\xampp\php\ext file_uploads On On highlight.bg #FFFFFF #FFFFFF highlight.comment #FF8000 #FF8000 highlight.default #0000BB #0000BB highlight.html #000000 #000000 highlight.keyword #007700 #007700 highlight.string #DD0000 #DD0000 html_errors On On ignore_repeated_errors Off Off ignore_repeated_source Off Off ignore_user_abort Off Off implicit_flush Off Off include_path .;C:\xampp\php\PEAR .;C:\xampp\php\PEAR log_errors Off Off log_errors_max_len 1024 1024 magic_quotes_gpc Off Off magic_quotes_runtime Off Off magic_quotes_sybase Off Off mail.add_x_header Off Off mail.force_extra_parameters no value no value mail.log no value no value max_execution_time 60 60 max_file_uploads 20 20 max_input_nesting_level 64 64 max_input_time 60 60 memory_limit 128M 128M open_basedir no value no value output_buffering no value no value output_handler no value no value post_max_size 128M 128M precision 14 14 realpath_cache_size 16K 16K realpath_cache_ttl 120 120 register_argc_argv On On register_globals Off Off register_long_arrays Off Off report_memleaks On On report_zend_debug On On request_order no value no value safe_mode Off Off safe_mode_exec_dir no value no value safe_mode_gid Off Off safe_mode_include_dir no value no value sendmail_from no value no value sendmail_path no value no value serialize_precision 100 100 short_open_tag Off Off SMTP localhost localhost smtp_port 25 25 sql.safe_mode Off Off track_errors Off Off unserialize_callback_func no value no value upload_max_filesize 128M 128M upload_tmp_dir C:\xampp\tmp C:\xampp\tmp user_dir no value no value user_ini.cache_ttl 300 300 user_ini.filename .user.ini .user.ini variables_order GPCS GPCS xmlrpc_error_number 0 0 xmlrpc_errors Off Off y2k_compliance On On zend.enable_gc On On ctype ctype functions enabled date date/time support enabled "Olson" Timezone Database Version 2009.18 Timezone Database internal Default timezone America/New_York Directive Local Value Master Value date.default_latitude 31.7667 31.7667 date.default_longitude 35.2333 35.2333 date.sunrise_zenith 90.583333 90.583333 date.sunset_zenith 90.583333 90.583333 date.timezone America/New_York America/New_York dom DOM/XML enabled DOM/XML API Version 20031129 libxml Version 2.7.6 HTML Support enabled XPath Support enabled XPointer Support enabled Schema Support enabled RelaxNG Support enabled ereg Regex Library System library enabled exif EXIF Support enabled EXIF Version 1.4 $Id: exif.c 287372 2009-08-16 14:32:32Z iliaa $ Supported EXIF Version 0220 Supported filetypes JPEG,TIFF Directive Local Value Master Value exif.decode_jis_intel JIS JIS exif.decode_jis_motorola JIS JIS exif.decode_unicode_intel UCS-2LE UCS-2LE exif.decode_unicode_motorola UCS-2BE UCS-2BE exif.encode_jis no value no value exif.encode_unicode ISO-8859-15 ISO-8859-15 fileinfo fileinfo support enabled version 1.0.5-dev filter Input Validation and Filtering enabled Revision $Revision: 289434 $ Directive Local Value Master Value filter.default unsafe_raw unsafe_raw filter.default_flags no value no value ftp FTP support enabled gd GD Support enabled GD Version bundled (2.0.34 compatible) FreeType Support enabled FreeType Linkage with freetype FreeType Version 2.3.11 T1Lib Support enabled GIF Read Support enabled GIF Create Support enabled JPEG Support enabled libJPEG Version 7 PNG Support enabled libPNG Version 1.2.40 WBMP Support enabled XBM Support enabled JIS-mapped Japanese Font Support enabled Directive Local Value Master Value gd.jpeg_ignore_warning 0 0 gettext GetText Support enabled hash hash support enabled Hashing Engines md2 md4 md5 sha1 sha224 sha256 sha384 sha512 ripemd128 ripemd160 ripemd256 ripemd320 whirlpool tiger128,3 tiger160,3 tiger192,3 tiger128,4 tiger160,4 tiger192,4 snefru snefru256 gost adler32 crc32 crc32b salsa10 salsa20 haval128,3 haval160,3 haval192,3 haval224,3 haval256,3 haval128,4 haval160,4 haval192,4 haval224,4 haval256,4 haval128,5 haval160,5 haval192,5 haval224,5 haval256,5 iconv iconv support enabled iconv implementation "libiconv" iconv library version 1.13 Directive Local Value Master Value iconv.input_encoding ISO-8859-1 ISO-8859-1 iconv.internal_encoding ISO-8859-1 ISO-8859-1 iconv.output_encoding ISO-8859-1 ISO-8859-1 imap IMAP c-Client Version 2007e SSL Support enabled json json support enabled json version 1.2.1 libxml libXML support active libXML Compiled Version 2.7.6 libXML Loaded Version 20706 libXML streams enabled mbstring Multibyte Support enabled Multibyte string engine libmbfl HTTP input encoding translation disabled mbstring extension makes use of "streamable kanji code filter and converter", which is distributed under the GNU Lesser General Public License version 2.1. Multibyte (japanese) regex support enabled Multibyte regex (oniguruma) version 4.7.1 Directive Local Value Master Value mbstring.detect_order no value no value mbstring.encoding_translation Off Off mbstring.func_overload 0 0 mbstring.http_input pass pass mbstring.http_output pass pass mbstring.http_output_conv_mimetypes ^(text/|application/xhtml\+xml) ^(text/|application/xhtml\+xml) mbstring.internal_encoding no value no value mbstring.language neutral neutral mbstring.strict_detection Off Off mbstring.substitute_character no value no value mcrypt mcrypt support enabled Version 2.5.8 Api No 20021217 Supported ciphers cast-128 gost rijndael-128 twofish arcfour cast-256 loki97 rijndael-192 saferplus wake blowfish-compat des rijndael-256 serpent xtea blowfish enigma rc2 tripledes Supported modes cbc cfb ctr ecb ncfb nofb ofb stream Directive Local Value Master Value mcrypt.algorithms_dir no value no value mcrypt.modes_dir no value no value mhash MHASH support Enabled MHASH API Version Emulated Support ming Ming SWF output library enabled Version 0.4.3 mysql MySQL Support enabled Active Persistent Links 0 Active Links 0 Client API version 5.1.41 Directive Local Value Master Value mysql.allow_local_infile On On mysql.allow_persistent On On mysql.connect_timeout 60 60 mysql.default_host no value no value mysql.default_password no value no value mysql.default_port 3306 3306 mysql.default_socket MySQL MySQL mysql.default_user no value no value mysql.max_links Unlimited Unlimited mysql.max_persistent Unlimited Unlimited mysql.trace_mode Off Off mysqli MysqlI Support enabled Client API library version 5.1.41 Active Persistent Links 0 Inactive Persistent Links 0 Active Links 0 Client API header version 5.1.41 MYSQLI_SOCKET MySQL Directive Local Value Master Value mysqli.allow_local_infile On On mysqli.allow_persistent On On mysqli.default_host no value no value mysqli.default_port 3306 3306 mysqli.default_pw no value no value mysqli.default_socket MySQL MySQL mysqli.default_user no value no value mysqli.max_links Unlimited Unlimited mysqli.max_persistent Unlimited Unlimited mysqli.reconnect Off Off mysqlnd mysqlnd enabled Version mysqlnd 5.0.5-dev - 081106 - $Revision: 289630 $ Command buffer size 4096 Read buffer size 32768 Read timeout 31536000 Collecting statistics Yes Collecting memory statistics No Client statistics bytes_sent 0 bytes_received 0 packets_sent 0 packets_received 0 protocol_overhead_in 0 protocol_overhead_out 0 bytes_received_ok_packet 0 bytes_received_eof_packet 0 bytes_received_rset_header_packet 0 bytes_received_rset_field_meta_packet 0 bytes_received_rset_row_packet 0 bytes_received_prepare_response_packet 0 bytes_received_change_user_packet 0 packets_sent_command 0 packets_received_ok 0 packets_received_eof 0 packets_received_rset_header 0 packets_received_rset_field_meta 0 packets_received_rset_row 0 packets_received_prepare_response 0 packets_received_change_user 0 result_set_queries 0 non_result_set_queries 0 no_index_used 0 bad_index_used 0 slow_queries 0 buffered_sets 0 unbuffered_sets 0 ps_buffered_sets 0 ps_unbuffered_sets 0 flushed_normal_sets 0 flushed_ps_sets 0 ps_prepared_never_executed 0 ps_prepared_once_executed 0 rows_fetched_from_server_normal 0 rows_fetched_from_server_ps 0 rows_buffered_from_client_normal 0 rows_buffered_from_client_ps 0 rows_fetched_from_client_normal_buffered 0 rows_fetched_from_client_normal_unbuffered 0 rows_fetched_from_client_ps_buffered 0 rows_fetched_from_client_ps_unbuffered 0 rows_fetched_from_client_ps_cursor 0 rows_skipped_normal 0 rows_skipped_ps 0 copy_on_write_saved 0 copy_on_write_performed 0 command_buffer_too_small 0 connect_success 0 connect_failure 0 connection_reused 0 reconnect 0 pconnect_success 0 active_connections 0 active_persistent_connections 0 explicit_close 0 implicit_close 0 disconnect_close 0 in_middle_of_command_close 0 explicit_free_result 0 implicit_free_result 0 explicit_stmt_close 0 implicit_stmt_close 0 mem_emalloc_count 0 mem_emalloc_ammount 0 mem_ecalloc_count 0 mem_ecalloc_ammount 0 mem_erealloc_count 0 mem_erealloc_ammount 0 mem_efree_count 0 mem_malloc_count 0 mem_malloc_ammount 0 mem_calloc_count 0 mem_calloc_ammount 0 mem_realloc_count 0 mem_realloc_ammount 0 mem_free_count 0 proto_text_fetched_null 0 proto_text_fetched_bit 0 proto_text_fetched_tinyint 0 proto_text_fetched_short 0 proto_text_fetched_int24 0 proto_text_fetched_int 0 proto_text_fetched_bigint 0 proto_text_fetched_decimal 0 proto_text_fetched_float 0 proto_text_fetched_double 0 proto_text_fetched_date 0 proto_text_fetched_year 0 proto_text_fetched_time 0 proto_text_fetched_datetime 0 proto_text_fetched_timestamp 0 proto_text_fetched_string 0 proto_text_fetched_blob 0 proto_text_fetched_enum 0 proto_text_fetched_set 0 proto_text_fetched_geometry 0 proto_text_fetched_other 0 proto_binary_fetched_null 0 proto_binary_fetched_bit 0 proto_binary_fetched_tinyint 0 proto_binary_fetched_short 0 proto_binary_fetched_int24 0 proto_binary_fetched_int 0 proto_binary_fetched_bigint 0 proto_binary_fetched_decimal 0 proto_binary_fetched_float 0 proto_binary_fetched_double 0 proto_binary_fetched_date 0 proto_binary_fetched_year 0 proto_binary_fetched_time 0 proto_binary_fetched_datetime 0 proto_binary_fetched_timestamp 0 proto_binary_fetched_string 0 proto_binary_fetched_blob 0 proto_binary_fetched_enum 0 proto_binary_fetched_set 0 proto_binary_fetched_geometry 0 proto_binary_fetched_other 0 init_command_executed_count 0 init_command_failed_count 0 odbc ODBC Support enabled Active Persistent Links 0 Active Links 0 ODBC library Win32 Directive Local Value Master Value odbc.allow_persistent On On odbc.check_persistent On On odbc.default_cursortype Static cursor Static cursor odbc.default_db no value no value odbc.default_pw no value no value odbc.default_user no value no value odbc.defaultbinmode return as is return as is odbc.defaultlrl return up to 4096 bytes return up to 4096 bytes odbc.max_links Unlimited Unlimited odbc.max_persistent Unlimited Unlimited openssl OpenSSL support enabled OpenSSL Library Version OpenSSL 0.9.8l 5 Nov 2009 OpenSSL Header Version OpenSSL 0.9.8l 5 Nov 2009 pcre PCRE (Perl Compatible Regular Expressions) Support enabled PCRE Library Version 8.00 2009-10-19 Directive Local Value Master Value pcre.backtrack_limit 100000 100000 pcre.recursion_limit 100000 100000 pdf PDF Support enabled PDFlib GmbH Version 7.0.4p4 PECL Version 2.1.6 Revision $Revision: 277110 $ PDO PDO support enabled PDO drivers mysql, odbc, sqlite, sqlite2 pdo_mysql PDO Driver for MySQL enabled Client API version 5.1.41 PDO_ODBC PDO Driver for ODBC (Win32) enabled ODBC Connection Pooling Enabled, strict matching pdo_sqlite PDO Driver for SQLite 3.x enabled SQLite Library 3.6.20 Phar Phar: PHP Archive support enabled Phar EXT version 2.0.1 Phar API version 1.1.1 CVS revision $Revision: 286338 $ Phar-based phar archives enabled Tar-based phar archives enabled ZIP-based phar archives enabled gzip compression enabled bzip2 compression enabled Native OpenSSL support enabled Phar based on pear/PHP_Archive, original concept by Davey Shafik. Phar fully realized by Gregory Beaver and Marcus Boerger. Portions of tar implementation Copyright (c) 2003-2009 Tim Kientzle. Directive Local Value Master Value phar.cache_list no value no value phar.readonly On On phar.require_hash On On Reflection Reflection enabled Version $Revision: 287991 $ session Session Support enabled Registered save handlers files user sqlite Registered serializer handlers php php_binary wddx Directive Local Value Master Value session.auto_start Off Off session.bug_compat_42 On On session.bug_compat_warn On On session.cache_expire 180 180 session.cache_limiter nocache nocache session.cookie_domain no value no value session.cookie_httponly Off Off session.cookie_lifetime 0 0 session.cookie_path / / session.cookie_secure Off Off session.entropy_file no value no value session.entropy_length 0 0 session.gc_divisor 100 100 session.gc_maxlifetime 1440 1440 session.gc_probability 1 1 session.hash_bits_per_character 5 5 session.hash_function 0 0 session.name PHPSESSID PHPSESSID session.referer_check no value no value session.save_handler files files session.save_path C:\xampp\tmp C:\xampp\tmp session.serialize_handler php php session.use_cookies On On session.use_only_cookies Off Off session.use_trans_sid 0 0 SimpleXML Simplexml support enabled Revision $Revision: 281953 $ Schema support enabled soap Soap Client enabled Soap Server enabled Directive Local Value Master Value soap.wsdl_cache 1 1 soap.wsdl_cache_dir /tmp /tmp soap.wsdl_cache_enabled 1 1 soap.wsdl_cache_limit 5 5 soap.wsdl_cache_ttl 86400 86400 sockets Sockets Support enabled SPL SPL support enabled Interfaces Countable, OuterIterator, RecursiveIterator, SeekableIterator, SplObserver, SplSubject Classes AppendIterator, ArrayIterator, ArrayObject, BadFunctionCallException, BadMethodCallException, CachingIterator, DirectoryIterator, DomainException, EmptyIterator, FilesystemIterator, FilterIterator, GlobIterator, InfiniteIterator, InvalidArgumentException, IteratorIterator, LengthException, LimitIterator, LogicException, MultipleIterator, NoRewindIterator, OutOfBoundsException, OutOfRangeException, OverflowException, ParentIterator, RangeException, RecursiveArrayIterator, RecursiveCachingIterator, RecursiveDirectoryIterator, RecursiveFilterIterator, RecursiveIteratorIterator, RecursiveRegexIterator, RecursiveTreeIterator, RegexIterator, RuntimeException, SplDoublyLinkedList, SplFileInfo, SplFileObject, SplFixedArray, SplHeap, SplMinHeap, SplMaxHeap, SplObjectStorage, SplPriorityQueue, SplQueue, SplStack, SplTempFileObject, UnderflowException, UnexpectedValueException SQLite SQLite support enabled PECL Module version 2.0-dev $Id: sqlite.c 289598 2009-10-12 22:37:52Z pajoye $ SQLite Library 2.8.17 SQLite Encoding iso8859 Directive Local Value Master Value sqlite.assoc_case 0 0 sqlite3 SQLite3 support enabled SQLite3 module version 0.7-dev SQLite Library 3.6.20 Directive Local Value Master Value sqlite3.extension_dir no value no value standard Dynamic Library Support enabled Internal Sendmail Support for Windows enabled Directive Local Value Master Value assert.active 1 1 assert.bail 0 0 assert.callback no value no value assert.quiet_eval 0 0 assert.warning 1 1 auto_detect_line_endings 0 0 default_socket_timeout 60 60 safe_mode_allowed_env_vars PHP_ PHP_ safe_mode_protected_env_vars LD_LIBRARY_PATH LD_LIBRARY_PATH url_rewriter.tags a=href,area=href,frame=src,input=src,form=,fieldset= a=href,area=href,frame=src,input=src,form=,fieldset= user_agent no value no value tokenizer Tokenizer Support enabled wddx WDDX Support enabled WDDX Session Serializer enabled xml XML Support active XML Namespace Support active libxml2 Version 2.7.6 xmlreader XMLReader enabled xmlrpc core library version xmlrpc-epi v. 0.54 php extension version 0.51 author Dan Libby homepage http://xmlrpc-epi.sourceforge.net open sourced by Epinions.com xmlwriter XMLWriter enabled xsl XSL enabled libxslt Version 1.1.26 libxslt compiled against libxml Version 2.7.6 EXSLT enabled libexslt Version 1.1.26 zip Zip enabled Extension Version $Id: php_zip.c 276389 2009-02-24 23:55:14Z iliaa $ Zip version 1.9.1 Libzip version 0.9.0 zlib ZLib Support enabled Stream Wrapper support compress.zlib:// Stream Filter support zlib.inflate, zlib.deflate Compiled Version 1.2.3 Linked Version 1.2.3 Directive Local Value Master Value zlib.output_compression Off Off zlib.output_compression_level -1 -1 zlib.output_handler no value no value Additional Modules Module Name Environment Variable Value no value ::=::\ no value C:=C:\xampp ALLUSERSPROFILE C:\Documents and Settings\All Users APPDATA C:\Documents and Settings\Andrew\Application Data CHROME_RESTART Google Chrome|Whoa! Google Chrome has crashed. Restart now?|LEFT_TO_RIGHT CHROME_VERSION 5.0.342.8 CLASSPATH .;C:\Program Files\QuickTime\QTSystem\QTJava.zip CommonProgramFiles C:\Program Files\Common Files COMPUTERNAME ANDREW_LAPTOP ComSpec C:\WINDOWS\system32\cmd.exe FP_NO_HOST_CHECK NO HOMEDRIVE C: HOMEPATH \Documents and Settings\Andrew LOGONSERVER \\ANDREW_LAPTOP NUMBER_OF_PROCESSORS 2 OS Windows_NT PATH C:\Documents and Settings\Andrew\Local Settings\Application Data\Google\Chrome\Application;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Common Files\DivX Shared\;C:\Program Files\WiTopia.Net\bin PATHEXT .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH PROCESSOR_ARCHITECTURE x86 PROCESSOR_IDENTIFIER x86 Family 6 Model 15 Stepping 10, GenuineIntel PROCESSOR_LEVEL 6 PROCESSOR_REVISION 0f0a ProgramFiles C:\Program Files PROMPT $P$G QTJAVA C:\Program Files\QuickTime\QTSystem\QTJava.zip SESSIONNAME Console sfxcmd "C:\Documents and Settings\Andrew\My Documents\Downloads\xampp-win32-1.7.3.exe" sfxname C:\Documents and Settings\Andrew\My Documents\Downloads\xampp-win32-1.7.3.exe SystemDrive C: SystemRoot C:\WINDOWS TEMP C:\DOCUME~1\Andrew\LOCALS~1\Temp TMP C:\DOCUME~1\Andrew\LOCALS~1\Temp USERDOMAIN ANDREW_LAPTOP USERNAME Andrew USERPROFILE C:\Documents and Settings\Andrew VS100COMNTOOLS C:\Program Files\Microsoft Visual Studio 10.0\Common7\Tools\ windir C:\WINDOWS AP_PARENT_PID 2216 PHP Variables Variable Value _SERVER["MIBDIRS"] C:/xampp/php/extras/mibs _SERVER["MYSQL_HOME"] C:\xampp\mysql\bin _SERVER["OPENSSL_CONF"] C:/xampp/apache/bin/openssl.cnf _SERVER["PHP_PEAR_SYSCONF_DIR"] C:\xampp\php _SERVER["PHPRC"] C:\xampp\php _SERVER["TMP"] C:\xampp\tmp _SERVER["HTTP_HOST"] localhost _SERVER["HTTP_CONNECTION"] keep-alive _SERVER["HTTP_USER_AGENT"] Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/533.2 (KHTML, like Gecko) Chrome/5.0.342.8 Safari/533.2 _SERVER["HTTP_CACHE_CONTROL"] max-age=0 _SERVER["HTTP_ACCEPT"] application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5 _SERVER["HTTP_ACCEPT_ENCODING"] gzip,deflate,sdch _SERVER["HTTP_ACCEPT_LANGUAGE"] en-US,en;q=0.8 _SERVER["HTTP_ACCEPT_CHARSET"] ISO-8859-1,utf-8;q=0.7,*;q=0.3 _SERVER["PATH"] C:\Documents and Settings\Andrew\Local Settings\Application Data\Google\Chrome\Application;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Common Files\DivX Shared\;C:\Program Files\WiTopia.Net\bin _SERVER["SystemRoot"] C:\WINDOWS _SERVER["COMSPEC"] C:\WINDOWS\system32\cmd.exe _SERVER["PATHEXT"] .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH _SERVER["WINDIR"] C:\WINDOWS _SERVER["SERVER_SIGNATURE"] <address>Apache/2.2.14 (Win32) DAV/2 mod_ssl/2.2.14 OpenSSL/0.9.8l mod_autoindex_color PHP/5.3.1 mod_apreq2-20090110/2.7.1 mod_perl/2.0.4 Perl/v5.10.1 Server at localhost Port 80</address> _SERVER["SERVER_SOFTWARE"] Apache/2.2.14 (Win32) DAV/2 mod_ssl/2.2.14 OpenSSL/0.9.8l mod_autoindex_color PHP/5.3.1 mod_apreq2-20090110/2.7.1 mod_perl/2.0.4 Perl/v5.10.1 _SERVER["SERVER_NAME"] localhost _SERVER["SERVER_ADDR"] 127.0.0.1 _SERVER["SERVER_PORT"] 80 _SERVER["REMOTE_ADDR"] 127.0.0.1 _SERVER["DOCUMENT_ROOT"] C:/xampp/htdocs _SERVER["SERVER_ADMIN"] postmaster@localhost _SERVER["SCRIPT_FILENAME"] C:/xampp/htdocs/test.php _SERVER["REMOTE_PORT"] 3275 _SERVER["GATEWAY_INTERFACE"] CGI/1.1 _SERVER["SERVER_PROTOCOL"] HTTP/1.1 _SERVER["REQUEST_METHOD"] GET _SERVER["QUERY_STRING"] no value _SERVER["REQUEST_URI"] /test.php _SERVER["SCRIPT_NAME"] /test.php _SERVER["PHP_SELF"] /test.php _SERVER["REQUEST_TIME"] 1270600868 _SERVER["argv"] Array ( ) _SERVER["argc"] 0 PHP License This program is free software; you can redistribute it and/or modify it under the terms of the PHP License as published by the PHP Group and included in the distribution in the file: LICENSE This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. If you did not receive a copy of the PHP license, or have any questions about PHP licensing, please contact [email protected].

  Read the article

• fatal error C1014: too many include files : depth = 1024

  - by numerical25

  I have no idea what this means. But here is the code that it supposely is happening in. //======================================================================================= // d3dApp.cpp by Frank Luna (C) 2008 All Rights Reserved. //======================================================================================= #include "d3dApp.h" #include <stream> LRESULT CALLBACK MainWndProc(HWND hwnd, UINT msg, WPARAM wParam, LPARAM lParam) { static D3DApp* app = 0; switch( msg ) { case WM_CREATE: { // Get the 'this' pointer we passed to CreateWindow via the lpParam parameter. CREATESTRUCT* cs = (CREATESTRUCT*)lParam; app = (D3DApp*)cs->lpCreateParams; return 0; } } // Don't start processing messages until after WM_CREATE. if( app ) return app->msgProc(msg, wParam, lParam); else return DefWindowProc(hwnd, msg, wParam, lParam); } D3DApp::D3DApp(HINSTANCE hInstance) { mhAppInst = hInstance; mhMainWnd = 0; mAppPaused = false; mMinimized = false; mMaximized = false; mResizing = false; mFrameStats = L""; md3dDevice = 0; mSwapChain = 0; mDepthStencilBuffer = 0; mRenderTargetView = 0; mDepthStencilView = 0; mFont = 0; mMainWndCaption = L"D3D10 Application"; md3dDriverType = D3D10_DRIVER_TYPE_HARDWARE; mClearColor = D3DXCOLOR(0.0f, 0.0f, 1.0f, 1.0f); mClientWidth = 800; mClientHeight = 600; } D3DApp::~D3DApp() { ReleaseCOM(mRenderTargetView); ReleaseCOM(mDepthStencilView); ReleaseCOM(mSwapChain); ReleaseCOM(mDepthStencilBuffer); ReleaseCOM(md3dDevice); ReleaseCOM(mFont); } HINSTANCE D3DApp::getAppInst() { return mhAppInst; } HWND D3DApp::getMainWnd() { return mhMainWnd; } int D3DApp::run() { MSG msg = {0}; mTimer.reset(); while(msg.message != WM_QUIT) { // If there are Window messages then process them. if(PeekMessage( &msg, 0, 0, 0, PM_REMOVE )) { TranslateMessage( &msg ); DispatchMessage( &msg ); } // Otherwise, do animation/game stuff. else { mTimer.tick(); if( !mAppPaused ) updateScene(mTimer.getDeltaTime()); else Sleep(50); drawScene(); } } return (int)msg.wParam; } void D3DApp::initApp() { initMainWindow(); initDirect3D(); D3DX10_FONT_DESC fontDesc; fontDesc.Height = 24; fontDesc.Width = 0; fontDesc.Weight = 0; fontDesc.MipLevels = 1; fontDesc.Italic = false; fontDesc.CharSet = DEFAULT_CHARSET; fontDesc.OutputPrecision = OUT_DEFAULT_PRECIS; fontDesc.Quality = DEFAULT_QUALITY; fontDesc.PitchAndFamily = DEFAULT_PITCH | FF_DONTCARE; wcscpy(fontDesc.FaceName, L"Times New Roman"); D3DX10CreateFontIndirect(md3dDevice, &fontDesc, &mFont); } void D3DApp::onResize() { // Release the old views, as they hold references to the buffers we // will be destroying. Also release the old depth/stencil buffer. ReleaseCOM(mRenderTargetView); ReleaseCOM(mDepthStencilView); ReleaseCOM(mDepthStencilBuffer); // Resize the swap chain and recreate the render target view. HR(mSwapChain->ResizeBuffers(1, mClientWidth, mClientHeight, DXGI_FORMAT_R8G8B8A8_UNORM, 0)); ID3D10Texture2D* backBuffer; HR(mSwapChain->GetBuffer(0, __uuidof(ID3D10Texture2D), reinterpret_cast<void**>(&backBuffer))); HR(md3dDevice->CreateRenderTargetView(backBuffer, 0, &mRenderTargetView)); ReleaseCOM(backBuffer); // Create the depth/stencil buffer and view. D3D10_TEXTURE2D_DESC depthStencilDesc; depthStencilDesc.Width = mClientWidth; depthStencilDesc.Height = mClientHeight; depthStencilDesc.MipLevels = 1; depthStencilDesc.ArraySize = 1; depthStencilDesc.Format = DXGI_FORMAT_D24_UNORM_S8_UINT; depthStencilDesc.SampleDesc.Count = 1; // multisampling must match depthStencilDesc.SampleDesc.Quality = 0; // swap chain values. depthStencilDesc.Usage = D3D10_USAGE_DEFAULT; depthStencilDesc.BindFlags = D3D10_BIND_DEPTH_STENCIL; depthStencilDesc.CPUAccessFlags = 0; depthStencilDesc.MiscFlags = 0; HR(md3dDevice->CreateTexture2D(&depthStencilDesc, 0, &mDepthStencilBuffer)); HR(md3dDevice->CreateDepthStencilView(mDepthStencilBuffer, 0, &mDepthStencilView)); // Bind the render target view and depth/stencil view to the pipeline. md3dDevice->OMSetRenderTargets(1, &mRenderTargetView, mDepthStencilView); // Set the viewport transform. D3D10_VIEWPORT vp; vp.TopLeftX = 0; vp.TopLeftY = 0; vp.Width = mClientWidth; vp.Height = mClientHeight; vp.MinDepth = 0.0f; vp.MaxDepth = 1.0f; md3dDevice->RSSetViewports(1, &vp); } void D3DApp::updateScene(float dt) { // Code computes the average frames per second, and also the // average time it takes to render one frame. static int frameCnt = 0; static float t_base = 0.0f; frameCnt++; // Compute averages over one second period. if( (mTimer.getGameTime() - t_base) >= 1.0f ) { float fps = (float)frameCnt; // fps = frameCnt / 1 float mspf = 1000.0f / fps; std::wostringstream outs; outs.precision(6); outs << L"FPS: " << fps << L"\n" << "Milliseconds: Per Frame: " << mspf; mFrameStats = outs.str(); // Reset for next average. frameCnt = 0; t_base += 1.0f; } } void D3DApp::drawScene() { md3dDevice->ClearRenderTargetView(mRenderTargetView, mClearColor); md3dDevice->ClearDepthStencilView(mDepthStencilView, D3D10_CLEAR_DEPTH|D3D10_CLEAR_STENCIL, 1.0f, 0); } LRESULT D3DApp::msgProc(UINT msg, WPARAM wParam, LPARAM lParam) { switch( msg ) { // WM_ACTIVATE is sent when the window is activated or deactivated. // We pause the game when the window is deactivated and unpause it // when it becomes active. case WM_ACTIVATE: if( LOWORD(wParam) == WA_INACTIVE ) { mAppPaused = true; mTimer.stop(); } else { mAppPaused = false; mTimer.start(); } return 0; // WM_SIZE is sent when the user resizes the window. case WM_SIZE: // Save the new client area dimensions. mClientWidth = LOWORD(lParam); mClientHeight = HIWORD(lParam); if( md3dDevice ) { if( wParam == SIZE_MINIMIZED ) { mAppPaused = true; mMinimized = true; mMaximized = false; } else if( wParam == SIZE_MAXIMIZED ) { mAppPaused = false; mMinimized = false; mMaximized = true; onResize(); } else if( wParam == SIZE_RESTORED ) { // Restoring from minimized state? if( mMinimized ) { mAppPaused = false; mMinimized = false; onResize(); } // Restoring from maximized state? else if( mMaximized ) { mAppPaused = false; mMaximized = false; onResize(); } else if( mResizing ) { // If user is dragging the resize bars, we do not resize // the buffers here because as the user continuously // drags the resize bars, a stream of WM_SIZE messages are // sent to the window, and it would be pointless (and slow) // to resize for each WM_SIZE message received from dragging // the resize bars. So instead, we reset after the user is // done resizing the window and releases the resize bars, which // sends a WM_EXITSIZEMOVE message. } else // API call such as SetWindowPos or mSwapChain->SetFullscreenState. { onResize(); } } } return 0; // WM_EXITSIZEMOVE is sent when the user grabs the resize bars. case WM_ENTERSIZEMOVE: mAppPaused = true; mResizing = true; mTimer.stop(); return 0; // WM_EXITSIZEMOVE is sent when the user releases the resize bars. // Here we reset everything based on the new window dimensions. case WM_EXITSIZEMOVE: mAppPaused = false; mResizing = false; mTimer.start(); onResize(); return 0; // WM_DESTROY is sent when the window is being destroyed. case WM_DESTROY: PostQuitMessage(0); return 0; // The WM_MENUCHAR message is sent when a menu is active and the user presses // a key that does not correspond to any mnemonic or accelerator key. case WM_MENUCHAR: // Don't beep when we alt-enter. return MAKELRESULT(0, MNC_CLOSE); // Catch this message so to prevent the window from becoming too small. case WM_GETMINMAXINFO: ((MINMAXINFO*)lParam)->ptMinTrackSize.x = 200; ((MINMAXINFO*)lParam)->ptMinTrackSize.y = 200; return 0; } return DefWindowProc(mhMainWnd, msg, wParam, lParam); } void D3DApp::initMainWindow() { WNDCLASS wc; wc.style = CS_HREDRAW | CS_VREDRAW; wc.lpfnWndProc = MainWndProc; wc.cbClsExtra = 0; wc.cbWndExtra = 0; wc.hInstance = mhAppInst; wc.hIcon = LoadIcon(0, IDI_APPLICATION); wc.hCursor = LoadCursor(0, IDC_ARROW); wc.hbrBackground = (HBRUSH)GetStockObject(NULL_BRUSH); wc.lpszMenuName = 0; wc.lpszClassName = L"D3DWndClassName"; if( !RegisterClass(&wc) ) { MessageBox(0, L"RegisterClass FAILED", 0, 0); PostQuitMessage(0); } // Compute window rectangle dimensions based on requested client area dimensions. RECT R = { 0, 0, mClientWidth, mClientHeight }; AdjustWindowRect(&R, WS_OVERLAPPEDWINDOW, false); int width = R.right - R.left; int height = R.bottom - R.top; mhMainWnd = CreateWindow(L"D3DWndClassName", mMainWndCaption.c_str(), WS_OVERLAPPEDWINDOW, CW_USEDEFAULT, CW_USEDEFAULT, width, height, 0, 0, mhAppInst, this); if( !mhMainWnd ) { MessageBox(0, L"CreateWindow FAILED", 0, 0); PostQuitMessage(0); } ShowWindow(mhMainWnd, SW_SHOW); UpdateWindow(mhMainWnd); } void D3DApp::initDirect3D() { // Fill out a DXGI_SWAP_CHAIN_DESC to describe our swap chain. DXGI_SWAP_CHAIN_DESC sd; sd.BufferDesc.Width = mClientWidth; sd.BufferDesc.Height = mClientHeight; sd.BufferDesc.RefreshRate.Numerator = 60; sd.BufferDesc.RefreshRate.Denominator = 1; sd.BufferDesc.Format = DXGI_FORMAT_R8G8B8A8_UNORM; sd.BufferDesc.ScanlineOrdering = DXGI_MODE_SCANLINE_ORDER_UNSPECIFIED; sd.BufferDesc.Scaling = DXGI_MODE_SCALING_UNSPECIFIED; // No multisampling. sd.SampleDesc.Count = 1; sd.SampleDesc.Quality = 0; sd.BufferUsage = DXGI_USAGE_RENDER_TARGET_OUTPUT; sd.BufferCount = 1; sd.OutputWindow = mhMainWnd; sd.Windowed = true; sd.SwapEffect = DXGI_SWAP_EFFECT_DISCARD; sd.Flags = 0; // Create the device. UINT createDeviceFlags = 0; #if defined(DEBUG) || defined(_DEBUG) createDeviceFlags |= D3D10_CREATE_DEVICE_DEBUG; #endif HR( D3D10CreateDeviceAndSwapChain( 0, //default adapter md3dDriverType, 0, // no software device createDeviceFlags, D3D10_SDK_VERSION, &sd, &mSwapChain, &md3dDevice) ); // The remaining steps that need to be carried out for d3d creation // also need to be executed every time the window is resized. So // just call the onResize method here to avoid code duplication. onResize(); }

  Read the article

• 11415 compile errors FTW?!

  - by Koning Baard

  Hello. This is something I've really never seen but, I downloaded the source code of the sine wave example at http://www.audiosynth.com/sinewavedemo.html . It is in an old Project Builder Project format, and I want to compile it with Xcode (GCC). However, Xcode gives me 11415 compile errors. The first few are (all in the precompilation of AppKit.h): /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:31:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:31: error: expected identifier or '(' before '-' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:33:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:33: error: expected identifier or '(' before '-' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:35:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:35: error: expected identifier or '(' before '-' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:36:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:36: error: expected identifier or '(' before '-' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:37:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:37: error: expected identifier or '(' before '-' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:38:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:38: error: expected identifier or '(' before '-' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:40:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:40: error: expected identifier or '(' before '-' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:42:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:42: error: expected identifier or '(' before '@' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:48:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:48: error: expected identifier or '(' before '@' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:54:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:54: error: expected identifier or '(' before '@' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:59:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:59: error: expected identifier or '(' before '-' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:61:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:61: error: expected identifier or '(' before '@' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:69:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:69: error: expected identifier or '(' before '+' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:71:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:71: error: expected identifier or '(' before '+' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:39:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:39: error: expected identifier or '(' before '-' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:40:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:40: error: expected identifier or '(' before '-' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:41:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:41: error: expected identifier or '(' before '-' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:42:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:42: error: expected identifier or '(' before '-' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:43:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:43: error: expected identifier or '(' before '-' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:44:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:44: error: expected identifier or '(' before '-' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:45:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:45: error: expected identifier or '(' before '-' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:46:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:46: error: expected identifier or '(' before '-' token Some of the code is: HAL.c /* * HAL.c * Sinewave * * Created by james on Fri Apr 27 2001. * Copyright (c) 2001 __CompanyName__. All rights reserved. * */ #include "HAL.h" #include "math.h" appGlobals gAppGlobals; OSStatus appIOProc (AudioDeviceID inDevice, const AudioTimeStamp* inNow, const AudioBufferList* inInputData, const AudioTimeStamp* inInputTime, AudioBufferList* outOutputData, const AudioTimeStamp* inOutputTime, void* device); #define FailIf(cond, handler) \ if (cond) { \ goto handler; \ } #define FailWithAction(cond, action, handler) \ if (cond) { \ { action; } \ goto handler; \ } // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // HAL Sample Code ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ //#define noErr 0 //#define false 0 OSStatus SetupHAL (appGlobalsPtr globals) { OSStatus err = noErr; UInt32 count, bufferSize; AudioDeviceID device = kAudioDeviceUnknown; AudioStreamBasicDescription format; // get the default output device for the HAL count = sizeof(globals->device); // it is required to pass the size of the data to be returned err = AudioHardwareGetProperty(kAudioHardwarePropertyDefaultOutputDevice, &count, (void *) &device); fprintf(stderr, "kAudioHardwarePropertyDefaultOutputDevice %d\n", err); if (err != noErr) goto Bail; // get the buffersize that the default device uses for IO count = sizeof(globals->deviceBufferSize); // it is required to pass the size of the data to be returned err = AudioDeviceGetProperty(device, 0, false, kAudioDevicePropertyBufferSize, &count, &bufferSize); fprintf(stderr, "kAudioDevicePropertyBufferSize %d %d\n", err, bufferSize); if (err != noErr) goto Bail; // get a description of the data format used by the default device count = sizeof(globals->deviceFormat); // it is required to pass the size of the data to be returned err = AudioDeviceGetProperty(device, 0, false, kAudioDevicePropertyStreamFormat, &count, &format); fprintf(stderr, "kAudioDevicePropertyStreamFormat %d\n", err); fprintf(stderr, "sampleRate %g\n", format.mSampleRate); fprintf(stderr, "mFormatFlags %08X\n", format.mFormatFlags); fprintf(stderr, "mBytesPerPacket %d\n", format.mBytesPerPacket); fprintf(stderr, "mFramesPerPacket %d\n", format.mFramesPerPacket); fprintf(stderr, "mChannelsPerFrame %d\n", format.mChannelsPerFrame); fprintf(stderr, "mBytesPerFrame %d\n", format.mBytesPerFrame); fprintf(stderr, "mBitsPerChannel %d\n", format.mBitsPerChannel); if (err != kAudioHardwareNoError) goto Bail; FailWithAction(format.mFormatID != kAudioFormatLinearPCM, err = paramErr, Bail); // bail if the format is not linear pcm // everything is ok so fill in these globals globals->device = device; globals->deviceBufferSize = bufferSize; globals->deviceFormat = format; Bail: return (err); } /* struct AudioStreamBasicDescription { Float64 mSampleRate; // the native sample rate of the audio stream UInt32 mFormatID; // the specific encoding type of audio stream UInt32 mFormatFlags; // flags specific to each format UInt32 mBytesPerPacket; // the number of bytes in a packet UInt32 mFramesPerPacket; // the number of frames in each packet UInt32 mBytesPerFrame; // the number of bytes in a frame UInt32 mChannelsPerFrame; // the number of channels in each frame UInt32 mBitsPerChannel; // the number of bits in each channel }; typedef struct AudioStreamBasicDescription AudioStreamBasicDescription; */ // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // This is a simple playThru ioProc. It simply places the data in the input buffer back into the output buffer. // Watch out for feedback from Speakers to Microphone OSStatus appIOProc (AudioDeviceID inDevice, const AudioTimeStamp* inNow, const AudioBufferList* inInputData, const AudioTimeStamp* inInputTime, AudioBufferList* outOutputData, const AudioTimeStamp* inOutputTime, void* appGlobals) { appGlobalsPtr globals = appGlobals; int i; double phase = gAppGlobals.phase; double amp = gAppGlobals.amp; double pan = gAppGlobals.pan; double freq = gAppGlobals.freq * 2. * 3.14159265359 / globals->deviceFormat.mSampleRate; int numSamples = globals->deviceBufferSize / globals->deviceFormat.mBytesPerFrame; // assume floats for now.... float *out = outOutputData->mBuffers[0].mData; for (i=0; i<numSamples; ++i) { float wave = sin(phase) * amp; phase = phase + freq; *out++ = wave * (1.0-pan); *out++ = wave * pan; } gAppGlobals.phase = phase; return (kAudioHardwareNoError); } // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ OSStatus StartPlayingThruHAL(appGlobalsPtr globals) { OSStatus err = kAudioHardwareNoError; if (globals->soundPlaying) return 0; globals->phase = 0.0; err = AudioDeviceAddIOProc(globals->device, appIOProc, (void *) globals); // setup our device with an IO proc if (err != kAudioHardwareNoError) goto Bail; err = AudioDeviceStart(globals->device, appIOProc); // start playing sound through the device if (err != kAudioHardwareNoError) goto Bail; globals->soundPlaying = true; // set the playing status global to true Bail: return (err); } // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ OSStatus StopPlayingThruHAL(appGlobalsPtr globals) { OSStatus err = kAudioHardwareNoError; if (!globals->soundPlaying) return 0; err = AudioDeviceStop(globals->device, appIOProc); // stop playing sound through the device if (err != kAudioHardwareNoError) goto Bail; err = AudioDeviceRemoveIOProc(globals->device, appIOProc); // remove the IO proc from the device if (err != kAudioHardwareNoError) goto Bail; globals->soundPlaying = false; // set the playing status global to false Bail: return (err); } Sinewave.m // // a very simple Cocoa CoreAudio app // by James McCartney [email protected] www.audiosynth.com // // Sinewave - this class implements a sine oscillator with dezippered control of frequency, pan and amplitude // #import "Sinewave.h" // define a C struct from the Obj-C object so audio callback can access data typedef struct { @defs(Sinewave); } sinewavedef; // this is the audio processing callback. OSStatus appIOProc (AudioDeviceID inDevice, const AudioTimeStamp* inNow, const AudioBufferList* inInputData, const AudioTimeStamp* inInputTime, AudioBufferList* outOutputData, const AudioTimeStamp* inOutputTime, void* defptr) { sinewavedef* def = defptr; // get access to Sinewave's data int i; // load instance vars into registers double phase = def->phase; double amp = def->amp; double pan = def->pan; double freq = def->freq; double ampz = def->ampz; double panz = def->panz; double freqz = def->freqz; int numSamples = def->deviceBufferSize / def->deviceFormat.mBytesPerFrame; // assume floats for now.... float *out = outOutputData->mBuffers[0].mData; for (i=0; i<numSamples; ++i) { float wave = sin(phase) * ampz; // generate sine wave phase = phase + freqz; // increment phase // write output *out++ = wave * (1.0-panz); // left channel *out++ = wave * panz; // right channel // de-zipper controls panz = 0.001 * pan + 0.999 * panz; ampz = 0.001 * amp + 0.999 * ampz; freqz = 0.001 * freq + 0.999 * freqz; } // save registers back to object def->phase = phase; def->freqz = freqz; def->ampz = ampz; def->panz = panz; return kAudioHardwareNoError; } @implementation Sinewave - (void) setup { OSStatus err = kAudioHardwareNoError; UInt32 count; device = kAudioDeviceUnknown; initialized = NO; // get the default output device for the HAL count = sizeof(device); // it is required to pass the size of the data to be returned err = AudioHardwareGetProperty(kAudioHardwarePropertyDefaultOutputDevice, &count, (void *) &device); if (err != kAudioHardwareNoError) { fprintf(stderr, "get kAudioHardwarePropertyDefaultOutputDevice error %ld\n", err); return; } // get the buffersize that the default device uses for IO count = sizeof(deviceBufferSize); // it is required to pass the size of the data to be returned err = AudioDeviceGetProperty(device, 0, false, kAudioDevicePropertyBufferSize, &count, &deviceBufferSize); if (err != kAudioHardwareNoError) { fprintf(stderr, "get kAudioDevicePropertyBufferSize error %ld\n", err); return; } fprintf(stderr, "deviceBufferSize = %ld\n", deviceBufferSize); // get a description of the data format used by the default device count = sizeof(deviceFormat); // it is required to pass the size of the data to be returned err = AudioDeviceGetProperty(device, 0, false, kAudioDevicePropertyStreamFormat, &count, &deviceFormat); if (err != kAudioHardwareNoError) { fprintf(stderr, "get kAudioDevicePropertyStreamFormat error %ld\n", err); return; } if (deviceFormat.mFormatID != kAudioFormatLinearPCM) { fprintf(stderr, "mFormatID != kAudioFormatLinearPCM\n"); return; } if (!(deviceFormat.mFormatFlags & kLinearPCMFormatFlagIsFloat)) { fprintf(stderr, "Sorry, currently only works with float format....\n"); return; } initialized = YES; fprintf(stderr, "mSampleRate = %g\n", deviceFormat.mSampleRate); fprintf(stderr, "mFormatFlags = %08lX\n", deviceFormat.mFormatFlags); fprintf(stderr, "mBytesPerPacket = %ld\n", deviceFormat.mBytesPerPacket); fprintf(stderr, "mFramesPerPacket = %ld\n", deviceFormat.mFramesPerPacket); fprintf(stderr, "mChannelsPerFrame = %ld\n", deviceFormat.mChannelsPerFrame); fprintf(stderr, "mBytesPerFrame = %ld\n", deviceFormat.mBytesPerFrame); fprintf(stderr, "mBitsPerChannel = %ld\n", deviceFormat.mBitsPerChannel); } - (void)setAmpVal:(double)val { amp = val; } - (void)setFreqVal:(double)val { freq = val * 2. * 3.14159265359 / deviceFormat.mSampleRate; } - (void)setPanVal:(double)val { pan = val; } - (BOOL)start { OSStatus err = kAudioHardwareNoError; sinewavedef *def; if (!initialized) return false; if (soundPlaying) return false; // initialize phase and de-zipper filters. phase = 0.0; freqz = freq; ampz = amp; panz = pan; def = (sinewavedef *)self; err = AudioDeviceAddIOProc(device, appIOProc, (void *) def); // setup our device with an IO proc if (err != kAudioHardwareNoError) return false; err = AudioDeviceStart(device, appIOProc); // start playing sound through the device if (err != kAudioHardwareNoError) return false; soundPlaying = true; // set the playing status global to true return true; } - (BOOL)stop { OSStatus err = kAudioHardwareNoError; if (!initialized) return false; if (!soundPlaying) return false; err = AudioDeviceStop(device, appIOProc); // stop playing sound through the device if (err != kAudioHardwareNoError) return false; err = AudioDeviceRemoveIOProc(device, appIOProc); // remove the IO proc from the device if (err != kAudioHardwareNoError) return false; soundPlaying = false; // set the playing status global to false return true; } @end Can anyone help me compiling this example? I'd really appriciate it. Thanks

  Read the article

• mac, netbeans 6.8, c++, sdl, opengl: compilation problems

  - by ufk

  Hiya. I'm trying to properly compile a c++ opengl+sdl application using netbeans 6.8 under Snow Leopard 64-bit. I have libSDL 1.2.14 installed using macports. The script that I try to compile is the following: #ifdef WIN32 #define WIN32_LEAN_AND_MEAN #include <windows.h> #endif #if defined(__APPLE__) && defined(__MACH__) #include <OpenGL/gl.h> // Header File For The OpenGL32 Library #include <OpenGL/glu.h> // Header File For The GLu32 Library #else #include <GL/gl.h> // Header File For The OpenGL32 Library #include <GL/glu.h> // Header File For The GLu32 Library #endif #include "sdl/SDL.h" #include <stdio.h> #include <unistd.h> #include "SDL/SDL_main.h" SDL_Surface *screen=NULL; GLfloat rtri; // Angle For The Triangle ( NEW ) GLfloat rquad; // Angle For The Quad ( NEW ) void InitGL(int Width, int Height) // We call this right after our OpenGL window is created. { glViewport(0, 0, Width, Height); glClearColor(0.0f, 0.0f, 0.0f, 0.0f); // This Will Clear The Background Color To Black glClearDepth(1.0); // Enables Clearing Of The Depth Buffer glDepthFunc(GL_LESS); // The Type Of Depth Test To Do glEnable(GL_DEPTH_TEST); // Enables Depth Testing glShadeModel(GL_SMOOTH); // Enables Smooth Color Shading glMatrixMode(GL_PROJECTION); glLoadIdentity(); // Reset The Projection Matrix gluPerspective(45.0f,(GLfloat)Width/(GLfloat)Height,0.1f,100.0f); // Calculate The Aspect Ratio Of The Window glMatrixMode(GL_MODELVIEW); } /* The main drawing function. */ int DrawGLScene() { glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); // Clear The Screen And The Depth Buffer glLoadIdentity(); // Reset The View glTranslatef(-1.5f,0.0f,-6.0f); // Move Left 1.5 Units And Into The Screen 6.0 glRotatef(rtri,0.0f,1.0f,0.0f); // Rotate The Triangle On The Y axis ( NEW ) // draw a triangle glBegin(GL_TRIANGLES); // Begin Drawing Triangles glColor3f(1.0f,0.0f,0.0f); // Red glVertex3f( 0.0f, 1.0f, 0.0f); // Top Of Triangle (Front) glColor3f(0.0f,1.0f,0.0f); // Green glVertex3f(-1.0f,-1.0f, 1.0f); // Left Of Triangle (Front) glColor3f(0.0f,0.0f,1.0f); // Blue glVertex3f( 1.0f,-1.0f, 1.0f); // Right Of Triangle (Front) glColor3f(1.0f,0.0f,0.0f); // Red glVertex3f( 0.0f, 1.0f, 0.0f); // Top Of Triangle (Right) glColor3f(0.0f,0.0f,1.0f); // Blue glVertex3f( 1.0f,-1.0f, 1.0f); // Left Of Triangle (Right) glColor3f(0.0f,1.0f,0.0f); // Green glVertex3f( 1.0f,-1.0f, -1.0f); // Right Of Triangle (Right) glColor3f(1.0f,0.0f,0.0f); // Red glVertex3f( 0.0f, 1.0f, 0.0f); // Top Of Triangle (Back) glColor3f(0.0f,1.0f,0.0f); // Green glVertex3f( 1.0f,-1.0f, -1.0f); // Left Of Triangle (Back) glColor3f(0.0f,0.0f,1.0f); // Blue glVertex3f(-1.0f,-1.0f, -1.0f); // Right Of Triangle (Back) glColor3f(1.0f,0.0f,0.0f); // Red glVertex3f( 0.0f, 1.0f, 0.0f); // Top Of Triangle (Left) glColor3f(0.0f,0.0f,1.0f); // Blue glVertex3f(-1.0f,-1.0f,-1.0f); // Left Of Triangle (Left) glColor3f(0.0f,1.0f,0.0f); // Green glVertex3f(-1.0f,-1.0f, 1.0f); // Right Of Triangle (Left) glEnd(); glLoadIdentity(); // Reset The Current Modelview Matrix glTranslatef(1.5f,0.0f,-7.0f); // Move Right 1.5 Units And Into The Screen 6.0 glRotatef(rquad,1.0f,0.0f,0.0f); // Rotate The Quad On The X axis ( NEW ) glBegin(GL_QUADS); // Start Drawing Quads glColor3f(0.0f,1.0f,0.0f); // Set The Color To Green glVertex3f( 1.0f, 1.0f,-1.0f); // Top Right Of The Quad (Top) glVertex3f(-1.0f, 1.0f,-1.0f); // Top Left Of The Quad (Top) glVertex3f(-1.0f, 1.0f, 1.0f); // Bottom Left Of The Quad (Top) glVertex3f( 1.0f, 1.0f, 1.0f); // Bottom Right Of The Quad (Top) glColor3f(1.0f,0.5f,0.0f); // Set The Color To Orange glVertex3f( 1.0f,-1.0f, 1.0f); // Top Right Of The Quad (Bottom) glVertex3f(-1.0f,-1.0f, 1.0f); // Top Left Of The Quad (Bottom) glVertex3f(-1.0f,-1.0f,-1.0f); // Bottom Left Of The Quad (Bottom) glVertex3f( 1.0f,-1.0f,-1.0f); // Bottom Right Of The Quad (Bottom) glColor3f(1.0f,0.0f,0.0f); // Set The Color To Red glVertex3f( 1.0f, 1.0f, 1.0f); // Top Right Of The Quad (Front) glVertex3f(-1.0f, 1.0f, 1.0f); // Top Left Of The Quad (Front) glVertex3f(-1.0f,-1.0f, 1.0f); // Bottom Left Of The Quad (Front) glVertex3f( 1.0f,-1.0f, 1.0f); // Bottom Right Of The Quad (Front) glColor3f(1.0f,1.0f,0.0f); // Set The Color To Yellow glVertex3f( 1.0f,-1.0f,-1.0f); // Bottom Left Of The Quad (Back) glVertex3f(-1.0f,-1.0f,-1.0f); // Bottom Right Of The Quad (Back) glVertex3f(-1.0f, 1.0f,-1.0f); // Top Right Of The Quad (Back) glVertex3f( 1.0f, 1.0f,-1.0f); // Top Left Of The Quad (Back) glColor3f(0.0f,0.0f,1.0f); // Set The Color To Blue glVertex3f(-1.0f, 1.0f, 1.0f); // Top Right Of The Quad (Left) glVertex3f(-1.0f, 1.0f,-1.0f); // Top Left Of The Quad (Left) glVertex3f(-1.0f,-1.0f,-1.0f); // Bottom Left Of The Quad (Left) glVertex3f(-1.0f,-1.0f, 1.0f); // Bottom Right Of The Quad (Left) glColor3f(1.0f,0.0f,1.0f); // Set The Color To Violet glVertex3f( 1.0f, 1.0f,-1.0f); // Top Right Of The Quad (Right) glVertex3f( 1.0f, 1.0f, 1.0f); // Top Left Of The Quad (Right) glVertex3f( 1.0f,-1.0f, 1.0f); // Bottom Left Of The Quad (Right) glVertex3f( 1.0f,-1.0f,-1.0f); // Bottom Right Of The Quad (Right) glEnd(); // Done Drawing A Quad rtri+=0.02f; // Increase The Rotation Variable For The Triangle ( NEW ) rquad-=0.015f; // Decrease The Rotation Variable For The Quad ( NEW ) // swap buffers to display, since we're double buffered. SDL_GL_SwapBuffers(); return true; } int main(int argc,char* argv[]) { int done; /*variable to hold the file name of the image to be loaded *In real world error handling code would precede this */ /* Initialize SDL for video output */ if ( SDL_Init(SDL_INIT_VIDEO) < 0 ) { fprintf(stderr, "Unable to initialize SDL: %s\n", SDL_GetError()); exit(1); } atexit(SDL_Quit); /* Create a 640x480 OpenGL screen */ if ( SDL_SetVideoMode(640, 480, 0, SDL_OPENGL) == NULL ) { fprintf(stderr, "Unable to create OpenGL screen: %s\n", SDL_GetError()); SDL_Quit(); exit(2); } SDL_WM_SetCaption("another example",NULL); InitGL(640,480); done=0; while (! done) { DrawGLScene(); SDL_Event event; while ( SDL_PollEvent(&event) ) { if ( event.type == SDL_QUIT ) { done = 1; } if ( event.type == SDL_KEYDOWN ) { if ( event.key.keysym.sym == SDLK_ESCAPE ) { done = 1; } } } } } Under netbeans project properties I configured the following: C++ Compiler: added /usr/X11/include and /opt/local/include to the include directories. Linker: I added the following libraries: /usr/X11/lib/libGL.dylib /usr/X11/lib/libGLU.dylib /opt/local/lib/libSDL.dylib /opt/local/lib/libSDLmain.a Now... before I included SDL_main.h and libSDLMain.a to the project I got an error unknown reference to _main then I read here: http://www.libsdl.org/faq.php?action=listentries&category=7#55 that I need to include SDL_Main.h and to link libSDLMain.so to my project. after doing so, the project still won't compile. this is the Netbeans output: /usr/bin/make -f nbproject/Makefile-Debug.mk SUBPROJECTS= .clean-conf rm -f -r build/Debug rm -f dist/Debug/GNU-MacOSX/opengl2 CLEAN SUCCESSFUL (total time: 79ms) /usr/bin/make -f nbproject/Makefile-Debug.mk SUBPROJECTS= .build-conf /usr/bin/make -f nbproject/Makefile-Debug.mk dist/Debug/GNU-MacOSX/opengl2 mkdir -p build/Debug/GNU-MacOSX rm -f build/Debug/GNU-MacOSX/main.o.d g++ -c -g -I/usr/X11/include -I/opt/local/include -MMD -MP -MF build/Debug/GNU-MacOSX/main.o.d -o build/Debug/GNU-MacOSX/main.o main.cpp mkdir -p dist/Debug/GNU-MacOSX g++ -o dist/Debug/GNU-MacOSX/opengl2 build/Debug/GNU-MacOSX/main.o /opt/local/lib/libIL.dylib /opt/local/lib/libILU.dylib /opt/local/lib/libILUT.dylib /usr/X11/lib/libGL.dylib /usr/X11/lib/libGLU.dylib /opt/local/lib/libSDL.dylib /opt/local/lib/libSDLmain.a Undefined symbols: "_OBJC_CLASS_$_NSMenu", referenced from: __objc_classrefs__DATA@0 in libSDLmain.a(SDLMain.o) "__objc_empty_cache", referenced from: _OBJC_METACLASS_$_SDLMain in libSDLmain.a(SDLMain.o) _OBJC_CLASS_$_SDLMain in libSDLmain.a(SDLMain.o) "_CFBundleGetMainBundle", referenced from: -[SDLMain setupWorkingDirectory:] in libSDLmain.a(SDLMain.o) _main in libSDLmain.a(SDLMain.o) "_CFURLGetFileSystemRepresentation", referenced from: -[SDLMain setupWorkingDirectory:] in libSDLmain.a(SDLMain.o) "_NSApp", referenced from: _main in libSDLmain.a(SDLMain.o) _main in libSDLmain.a(SDLMain.o) _main in libSDLmain.a(SDLMain.o) _main in libSDLmain.a(SDLMain.o) _main in libSDLmain.a(SDLMain.o) _main in libSDLmain.a(SDLMain.o) _main in libSDLmain.a(SDLMain.o) "_OBJC_CLASS_$_NSProcessInfo", referenced from: __objc_classrefs__DATA@0 in libSDLmain.a(SDLMain.o) "_CFURLCreateCopyDeletingLastPathComponent", referenced from: -[SDLMain setupWorkingDirectory:] in libSDLmain.a(SDLMain.o) "_NSAllocateMemoryPages", referenced from: -[NSString(ReplaceSubString) stringByReplacingRange:with:] in libSDLmain.a(SDLMain.o) "___CFConstantStringClassReference", referenced from: cfstring=CFBundleName in libSDLmain.a(SDLMain.o) cfstring= in libSDLmain.a(SDLMain.o) cfstring=About in libSDLmain.a(SDLMain.o) cfstring=Hide in libSDLmain.a(SDLMain.o) cfstring=h in libSDLmain.a(SDLMain.o) cfstring=Hide Others in libSDLmain.a(SDLMain.o) cfstring=Show All in libSDLmain.a(SDLMain.o) cfstring=Quit in libSDLmain.a(SDLMain.o) cfstring=q in libSDLmain.a(SDLMain.o) cfstring=Window in libSDLmain.a(SDLMain.o) cfstring=m in libSDLmain.a(SDLMain.o) cfstring=Minimize in libSDLmain.a(SDLMain.o) "_OBJC_CLASS_$_NSAutoreleasePool", referenced from: __objc_classrefs__DATA@0 in libSDLmain.a(SDLMain.o) "_CPSEnableForegroundOperation", referenced from: _main in libSDLmain.a(SDLMain.o) "_CPSGetCurrentProcess", referenced from: _main in libSDLmain.a(SDLMain.o) "_CFBundleCopyBundleURL", referenced from: -[SDLMain setupWorkingDirectory:] in libSDLmain.a(SDLMain.o) "_NSDeallocateMemoryPages", referenced from: -[NSString(ReplaceSubString) stringByReplacingRange:with:] in libSDLmain.a(SDLMain.o) "_OBJC_CLASS_$_NSApplication", referenced from: l_OBJC_$_CATEGORY_NSApplication_$_SDLApplication in libSDLmain.a(SDLMain.o) __objc_classrefs__DATA@0 in libSDLmain.a(SDLMain.o) "_CPSSetFrontProcess", referenced from: _main in libSDLmain.a(SDLMain.o) "_OBJC_CLASS_$_NSString", referenced from: l_OBJC_$_CATEGORY_NSString_$_ReplaceSubString in libSDLmain.a(SDLMain.o) __objc_classrefs__DATA@0 in libSDLmain.a(SDLMain.o) "_OBJC_CLASS_$_NSObject", referenced from: _OBJC_CLASS_$_SDLMain in libSDLmain.a(SDLMain.o) "_CFBundleGetInfoDictionary", referenced from: _main in libSDLmain.a(SDLMain.o) "_CFRelease", referenced from: -[SDLMain setupWorkingDirectory:] in libSDLmain.a(SDLMain.o) -[SDLMain setupWorkingDirectory:] in libSDLmain.a(SDLMain.o) "__objc_empty_vtable", referenced from: _OBJC_METACLASS_$_SDLMain in libSDLmain.a(SDLMain.o) _OBJC_CLASS_$_SDLMain in libSDLmain.a(SDLMain.o) "_OBJC_CLASS_$_NSMenuItem", referenced from: __objc_classrefs__DATA@0 in libSDLmain.a(SDLMain.o) "_objc_msgSend", referenced from: -[SDLMain application:openFile:] in libSDLmain.a(SDLMain.o) -[SDLMain applicationDidFinishLaunching:] in libSDLmain.a(SDLMain.o) -[NSString(ReplaceSubString) stringByReplacingRange:with:] in libSDLmain.a(SDLMain.o) -[NSString(ReplaceSubString) stringByReplacingRange:with:] in libSDLmain.a(SDLMain.o) -[NSString(ReplaceSubString) stringByReplacingRange:with:] in libSDLmain.a(SDLMain.o) -[NSString(ReplaceSubString) stringByReplacingRange:with:] in libSDLmain.a(SDLMain.o) _main in libSDLmain.a(SDLMain.o) _main in libSDLmain.a(SDLMain.o) _main in libSDLmain.a(SDLMain.o) _main in libSDLmain.a(SDLMain.o) _main in libSDLmain.a(SDLMain.o) _main in libSDLmain.a(SDLMain.o) _main in libSDLmain.a(SDLMain.o) _main in libSDLmain.a(SDLMain.o) _main in libSDLmain.a(SDLMain.o) _main in libSDLmain.a(SDLMain.o) _main in libSDLmain.a(SDLMain.o) _main in libSDLmain.a(SDLMain.o) _main in libSDLmain.a(SDLMain.o) _main in libSDLmain.a(SDLMain.o) _main in libSDLmain.a(SDLMain.o) _main in libSDLmain.a(SDLMain.o) _main in libSDLmain.a(SDLMain.o) _main in libSDLmain.a(SDLMain.o) _main in libSDLmain.a(SDLMain.o) _main in libSDLmain.a(SDLMain.o) _main in libSDLmain.a(SDLMain.o) _main in libSDLmain.a(SDLMain.o) _main in libSDLmain.a(SDLMain.o) _main in libSDLmain.a(SDLMain.o) _main in libSDLmain.a(SDLMain.o) _main in libSDLmain.a(SDLMain.o) _main in libSDLmain.a(SDLMain.o) _main in libSDLmain.a(SDLMain.o) _main in libSDLmain.a(SDLMain.o) _main in libSDLmain.a(SDLMain.o) _main in libSDLmain.a(SDLMain.o) _main in libSDLmain.a(SDLMain.o) _main in libSDLmain.a(SDLMain.o) _main in libSDLmain.a(SDLMain.o) _main in libSDLmain.a(SDLMain.o) _main in libSDLmain.a(SDLMain.o) _main in libSDLmain.a(SDLMain.o) "_OBJC_METACLASS_$_NSObject", referenced from: _OBJC_METACLASS_$_SDLMain in libSDLmain.a(SDLMain.o) _OBJC_METACLASS_$_SDLMain in libSDLmain.a(SDLMain.o) "_objc_msgSend_fixup", referenced from: l_objc_msgSend_fixup_objectForKey_ in libSDLmain.a(SDLMain.o) l_objc_msgSend_fixup_length in libSDLmain.a(SDLMain.o) l_objc_msgSend_fixup_alloc in libSDLmain.a(SDLMain.o) l_objc_msgSend_fixup_release in libSDLmain.a(SDLMain.o) ld: symbol(s) not found collect2: ld returned 1 exit status make[2]: *** [dist/Debug/GNU-MacOSX/opengl2] Error 1 make[1]: *** [.build-conf] Error 2 make: *** [.build-impl] Error 2 BUILD FAILED (exit value 2, total time: 263ms) any ideas? thanks a lot!

  Read the article

• xutility file???

  - by user574290

  Hi all. I'm trying to use c code with opencv in face detection and counting, but I cannot build the source. I am trying to compile my project and I am having a lot of problems with a line in the xutility file. the error message show that it error with xutility file. Please help me, how to solve this problem? this is my code // Include header files #include "stdafx.h" #include "cv.h" #include "highgui.h" #include <stdio.h> #include <stdlib.h> #include <string.h> #include <assert.h> #include <math.h> #include <float.h> #include <limits.h> #include <time.h> #include <ctype.h> #include <iostream> #include <fstream> #include <vector> using namespace std; #ifdef _EiC #define WIN32 #endif int countfaces=0; int numFaces = 0; int k=0 ; int list=0; char filelist[512][512]; int timeCount = 0; static CvMemStorage* storage = 0; static CvHaarClassifierCascade* cascade = 0; void detect_and_draw( IplImage* image ); void WriteInDB(); int found_face(IplImage* img,CvPoint pt1,CvPoint pt2); int load_DB(char * filename); const char* cascade_name = "C:\\Program Files\\OpenCV\\OpenCV2.1\\data\\haarcascades\\haarcascade_frontalface_alt_tree.xml"; // BEGIN NEW CODE #define WRITEVIDEO char* outputVideo = "c:\\face_counting1_tracked.avi"; //int faceCount = 0; int posBuffer = 100; int persistDuration = 10; //faces can drop out for 10 frames int timestamp = 0; float sameFaceDistThreshold = 30; //pixel distance CvPoint facePositions[100]; int facePositionsTimestamp[100]; float distance( CvPoint a, CvPoint b ) { float dist = sqrt(float ( (a.x-b.x)*(a.x-b.x) + (a.y-b.y)*(a.y-b.y) ) ); return dist; } void expirePositions() { for (int i = 0; i < posBuffer; i++) { if (facePositionsTimestamp[i] <= (timestamp - persistDuration)) //if a tracked pos is older than three frames { facePositions[i] = cvPoint(999,999); } } } void updateCounter(CvPoint center) { bool newFace = true; for(int i = 0; i < posBuffer; i++) { if (distance(center, facePositions[i]) < sameFaceDistThreshold) { facePositions[i] = center; facePositionsTimestamp[i] = timestamp; newFace = false; break; } } if(newFace) { //push out oldest tracker for(int i = 1; i < posBuffer; i++) { facePositions[i] = facePositions[i - 1]; } //put new tracked position on top of stack facePositions[0] = center; facePositionsTimestamp[0] = timestamp; countfaces++; } } void drawCounter(IplImage* image) { // Create Font char buffer[5]; CvFont font; cvInitFont(&font, CV_FONT_HERSHEY_SIMPLEX, .5, .5, 0, 1); cvPutText(image, "Faces:", cvPoint(20, 20), &font, CV_RGB(0,255,0)); cvPutText(image, itoa(countfaces, buffer, 10), cvPoint(80, 20), &font, CV_RGB(0,255,0)); } #ifdef WRITEVIDEO CvVideoWriter* videoWriter = cvCreateVideoWriter(outputVideo, -1, 30, cvSize(240, 180)); #endif //END NEW CODE int main( int argc, char** argv ) { CvCapture* capture = 0; IplImage *frame, *frame_copy = 0; int optlen = strlen("--cascade="); const char* input_name; if( argc > 1 && strncmp( argv[1], "--cascade=", optlen ) == 0 ) { cascade_name = argv[1] + optlen; input_name = argc > 2 ? argv[2] : 0; } else { cascade_name = "C:\\Program Files\\OpenCV\\OpenCV2.1\\data\\haarcascades\\haarcascade_frontalface_alt_tree.xml"; input_name = argc > 1 ? argv[1] : 0; } cascade = (CvHaarClassifierCascade*)cvLoad( cascade_name, 0, 0, 0 ); if( !cascade ) { fprintf( stderr, "ERROR: Could not load classifier cascade\n" ); fprintf( stderr, "Usage: facedetect --cascade=\"<cascade_path>\" [filename|camera_index]\n" ); return -1; } storage = cvCreateMemStorage(0); //if( !input_name || (isdigit(input_name[0]) && input_name[1] == '\0') ) // capture = cvCaptureFromCAM( !input_name ? 0 : input_name[0] - '0' ); //else capture = cvCaptureFromAVI( "c:\\face_counting1.avi" ); cvNamedWindow( "result", 1 ); if( capture ) { for(;;) { if( !cvGrabFrame( capture )) break; frame = cvRetrieveFrame( capture ); if( !frame ) break; if( !frame_copy ) frame_copy = cvCreateImage( cvSize(frame->width,frame->height), IPL_DEPTH_8U, frame->nChannels ); if( frame->origin == IPL_ORIGIN_TL ) cvCopy( frame, frame_copy, 0 ); else cvFlip( frame, frame_copy, 0 ); detect_and_draw( frame_copy ); if( cvWaitKey( 30 ) >= 0 ) break; } cvReleaseImage( &frame_copy ); cvReleaseCapture( &capture ); } else { if( !input_name || (isdigit(input_name[0]) && input_name[1] == '\0')) cvNamedWindow( "result", 1 ); const char* filename = input_name ? input_name : (char*)"lena.jpg"; IplImage* image = cvLoadImage( filename, 1 ); if( image ) { detect_and_draw( image ); cvWaitKey(0); cvReleaseImage( &image ); } else { /* assume it is a text file containing the list of the image filenames to be processed - one per line */ FILE* f = fopen( filename, "rt" ); if( f ) { char buf[1000+1]; while( fgets( buf, 1000, f ) ) { int len = (int)strlen(buf); while( len > 0 && isspace(buf[len-1]) ) len--; buf[len] = '\0'; image = cvLoadImage( buf, 1 ); if( image ) { detect_and_draw( image ); cvWaitKey(0); cvReleaseImage( &image ); } } fclose(f); } } } cvDestroyWindow("result"); #ifdef WRITEVIDEO cvReleaseVideoWriter(&videoWriter); #endif return 0; } void detect_and_draw( IplImage* img ) { static CvScalar colors[] = { {{0,0,255}}, {{0,128,255}}, {{0,255,255}}, {{0,255,0}}, {{255,128,0}}, {{255,255,0}}, {{255,0,0}}, {{255,0,255}} }; double scale = 1.3; IplImage* gray = cvCreateImage( cvSize(img->width,img->height), 8, 1 ); IplImage* small_img = cvCreateImage( cvSize( cvRound (img->width/scale), cvRound (img->height/scale)), 8, 1 ); CvPoint pt1, pt2; int i; cvCvtColor( img, gray, CV_BGR2GRAY ); cvResize( gray, small_img, CV_INTER_LINEAR ); cvEqualizeHist( small_img, small_img ); cvClearMemStorage( storage ); if( cascade ) { double t = (double)cvGetTickCount(); CvSeq* faces = cvHaarDetectObjects( small_img, cascade, storage, 1.1, 2, 0/*CV_HAAR_DO_CANNY_PRUNING*/, cvSize(30, 30) ); t = (double)cvGetTickCount() - t; printf( "detection time = %gms\n", t/((double)cvGetTickFrequency()*1000.) ); if (faces) { //To save the detected faces into separate images, here's a quick and dirty code: char filename[6]; for( i = 0; i < (faces ? faces->total : 0); i++ ) { /* CvRect* r = (CvRect*)cvGetSeqElem( faces, i ); CvPoint center; int radius; center.x = cvRound((r->x + r->width*0.5)*scale); center.y = cvRound((r->y + r->height*0.5)*scale); radius = cvRound((r->width + r->height)*0.25*scale); cvCircle( img, center, radius, colors[i%8], 3, 8, 0 );*/ // Create a new rectangle for drawing the face CvRect* r = (CvRect*)cvGetSeqElem( faces, i ); // Find the dimensions of the face,and scale it if necessary pt1.x = r->x*scale; pt2.x = (r->x+r->width)*scale; pt1.y = r->y*scale; pt2.y = (r->y+r->height)*scale; // Draw the rectangle in the input image cvRectangle( img, pt1, pt2, CV_RGB(255,0,0), 3, 8, 0 ); CvPoint center; int radius; center.x = cvRound((r->x + r->width*0.5)*scale); center.y = cvRound((r->y + r->height*0.5)*scale); radius = cvRound((r->width + r->height)*0.25*scale); cvCircle( img, center, radius, CV_RGB(255,0,0), 3, 8, 0 ); //update counter updateCounter(center); int y=found_face(img,pt1,pt2); if(y==0) countfaces++; }//end for printf("Number of detected faces: %d\t",countfaces); }//end if //delete old track positions from facePositions array expirePositions(); timestamp++; //draw counter drawCounter(img); #ifdef WRITEVIDEO cvWriteFrame(videoWriter, img); #endif cvShowImage( "result", img ); cvDestroyWindow("Result"); cvReleaseImage( &gray ); cvReleaseImage( &small_img ); }//end if } //end void int found_face(IplImage* img,CvPoint pt1,CvPoint pt2) { /*if (faces) {*/ CvSeq* faces = cvHaarDetectObjects( img, cascade, storage, 1.1, 2, CV_HAAR_DO_CANNY_PRUNING, cvSize(40, 40) ); int i=0; char filename[512]; for( i = 0; i < (faces ? faces->total : 0); i++ ) {//int scale = 1, i=0; //i=iface; //char filename[512]; /* extract the rectanlges only */ // CvRect face_rect = *(CvRect*)cvGetSeqElem( faces, i); CvRect face_rect = *(CvRect*)cvGetSeqElem( faces, i); //IplImage* gray_img = cvCreateImage( cvGetSize(img), IPL_DEPTH_8U, 1 ); IplImage* clone = cvCreateImage (cvSize(img->width, img->height), IPL_DEPTH_8U, img->nChannels ); IplImage* gray = cvCreateImage (cvSize(img->width, img->height), IPL_DEPTH_8U, 1 ); cvCopy (img, clone, 0); cvNamedWindow ("ROI", CV_WINDOW_AUTOSIZE); cvCvtColor( clone, gray, CV_RGB2GRAY ); face_rect.x = pt1.x; face_rect.y = pt1.y; face_rect.width = abs(pt1.x - pt2.x); face_rect.height = abs(pt1.y - pt2.y); cvSetImageROI ( gray, face_rect); //// * rectangle = cvGetImageROI ( clone ); face_rect = cvGetImageROI ( gray ); cvShowImage ("ROI", gray); k++; char *name=0; name=(char*) calloc(512, 1); sprintf(name, "Image%d.pgm", k); cvSaveImage(name, gray); //////////////// for(int j=0;j<512;j++) filelist[list][j]=name[j]; list++; WriteInDB(); //int found=SIFT("result.txt",name); cvResetImageROI( gray ); //return found; return 0; // }//end if }//end for }//end void void WriteInDB() { ofstream myfile; myfile.open ("result.txt"); for(int i=0;i<512;i++) { if(strcmp(filelist[i],"")!=0) myfile << filelist[i]<<"\n"; } myfile.close(); } Error 3 error C4430: missing type specifier - int assumed. Note: C++ does not support default-int Error 8 error C4430: missing type specifier - int assumed. Note: C++ does not support default-int Error 13 error C4430: missing type specifier - int assumed. Note: C++ does not support default-int c:\program files\microsoft visual studio 9.0\vc\include\xutility 766 Error 18 error C4430: missing type specifier - int assumed. Note: C++ does not support default-int c:\program files\microsoft visual studio 9.0\vc\include\xutility 768 Error 23 error C4430: missing type specifier - int assumed. Note: C++ does not support default-int c:\program files\microsoft visual studio 9.0\vc\include\xutility 769 Error 10 error C2868: 'std::iterator_traits<_Iter>::value_type' : illegal syntax for using-declaration; expected qualified-name c:\program files\microsoft visual studio 9.0\vc\include\xutility 765 Error 25 error C2868: 'std::iterator_traits<_Iter>::reference' : illegal syntax for using-declaration; expected qualified-name c:\program files\microsoft visual studio 9.0\vc\include\xutility 769 Error 20 error C2868: 'std::iterator_traits<_Iter>::pointer' : illegal syntax for using-declaration; expected qualified-name c:\program files\microsoft visual studio 9.0\vc\include\xutility 768 Error 5 error C2868: 'std::iterator_traits<_Iter>::iterator_category' : illegal syntax for using-declaration; expected qualified-name c:\program files\microsoft visual studio 9.0\vc\include\xutility 764 Error 15 error C2868: 'std::iterator_traits<_Iter>::difference_type' : illegal syntax for using-declaration; expected qualified-name c:\program files\microsoft visual studio 9.0\vc\include\xutility 766 Error 9 error C2602: 'std::iterator_traits<_Iter>::value_type' is not a member of a base class of 'std::iterator_traits<_Iter>' c:\program files\microsoft visual studio 9.0\vc\include\xutility 765 Error 24 error C2602: 'std::iterator_traits<_Iter>::reference' is not a member of a base class of 'std::iterator_traits<_Iter>' c:\program files\microsoft visual studio 9.0\vc\include\xutility 769 Error 19 error C2602: 'std::iterator_traits<_Iter>::pointer' is not a member of a base class of 'std::iterator_traits<_Iter>' c:\program files\microsoft visual studio 9.0\vc\include\xutility 768 Error 4 error C2602: 'std::iterator_traits<_Iter>::iterator_category' is not a member of a base class of 'std::iterator_traits<_Iter>' c:\program files\microsoft visual studio 9.0\vc\include\xutility 764 Error 14 error C2602: 'std::iterator_traits<_Iter>::difference_type' is not a member of a base class of 'std::iterator_traits<_Iter>' c:\program files\microsoft visual studio 9.0\vc\include\xutility 766 Error 7 error C2146: syntax error : missing ';' before identifier 'value_type' c:\program files\microsoft visual studio 9.0\vc\include\xutility 765 Error 22 error C2146: syntax error : missing ';' before identifier 'reference' c:\program files\microsoft visual studio 9.0\vc\include\xutility 769 Error 17 error C2146: syntax error : missing ';' before identifier 'pointer' c:\program files\microsoft visual studio 9.0\vc\include\xutility 768 Error 2 error C2146: syntax error : missing ';' before identifier 'iterator_category' c:\program files\microsoft visual studio 9.0\vc\include\xutility 764 Error 12 error C2146: syntax error : missing ';' before identifier 'difference_type' c:\program files\microsoft visual studio 9.0\vc\include\xutility 766 Error 6 error C2039: 'value_type' : is not a member of 'CvPoint' c:\program files\microsoft visual studio 9.0\vc\include\xutility 765 Error 21 error C2039: 'reference' : is not a member of 'CvPoint' c:\program files\microsoft visual studio 9.0\vc\include\xutility 769 Error 16 error C2039: 'pointer' : is not a member of 'CvPoint' c:\program files\microsoft visual studio 9.0\vc\include\xutility 768 Error 1 error C2039: 'iterator_category' : is not a member of 'CvPoint' c:\program files\microsoft visual studio 9.0\vc\include\xutility 764 Error 11 error C2039: 'difference_type' : is not a member of 'CvPoint' c:\program files\microsoft visual studio 9.0\vc\include\xutility 766

  Read the article

• CodePlex Daily Summary for Wednesday, February 24, 2010

  CodePlex Daily Summary for Wednesday, February 24, 2010New ProjectsADO.Net DataSets to ExtJs.data.Store: A JavaScript (and C#) based project to reduce the amount of client-side code necessary to consume ADO.Net / ASP.Net web services when using ExtJS.AMP.Net Wrapper: AMP is a platform to build on-line marketplaces (http://www.poweredbyamp.com). AMP.Net provided Object-Like interaction with AMP's restful service...ArkSwitch: ArkSwitch is an easy to use, finger-friendly task manager for Windows Mobile 6.5.3 (with a WM6.5 compatibility mode). It is developed mainly in C#,...Biffen: Cinema-booking project in Computer Science at University College Nordjylland, Denmark.Braintree Client Library: Client library for integrating with the Braintree Gateway.Business Framework: A framework which helps building business applications. It provides business rules, validation rules and a text-based language for writing rules. I...Camp Araminta: This project will be used to coordinate development efforts on the Camp Araminta website.ChoServiceHost: Simple and easy way to create and host Windows Service Applications in .NET 3.5/Visual Studio 2008Delta College Game Development Project: Project site for cs 16 game development classDotNetNuke® Labs: DotNetNuke Labs is a collection of "research & development" type projects for the DotNetNuke platform.Generic web part for hosting Silverlight content on SharePoint sites (WSS,MOSS): This is a generic web part for hosting Silverlight content on WSS 30 and MOSS 2007 sites. The objective of this web part was to make it easy for us...GpTiming: GpTiming is a simple "lab" application related to race events, based on a Domain Model.HTML Forms in Windows Forms: As the names suggests this code library is designed to introduce HTML code (primarily form code) into Windows Forms. It was created because standar...imgur uploader - .net open source uploader for image sharing site imgur: Imgur uploader strives to be an easy to use uploader for images you would like to share with friends and family. It is written in c#.kuuy static system: kuuy static system is a full static publish website system!LaTeX Grapher: The goal of this project is to make a tool that facilitates making high quality two dimensional vector graphic function plots with a minimal amount...LightREST: A .NET library to consume REST-based HTTP services.Machiavelli: Machiavelli is Stackoverflow inspired project that I am working on following Andrew Siemer's article on DotNetSlackers. Mover: Mover makes it easier for developers to create programmatic animations in Silverlight. It provides an expressive API to the platform's underlying S...MVC Presenter: ASP.NET MVC 2で作るプレゼンビューアーnHibernate Attribute mapping: How to use Attibute mapping with a ManyToMany Relationship with nHibernateNIPO Data Processing Component Framework: NIPO is a general purpose component framework for data processing applications (that follow the IPO-principle). Its plugin-based architecture makes...PowerShell Remote File Explorer: This project intends to develop a Windows forms based file explorer to browse/transfer files over PowerShell 2.0 remoting channel. The file transfe...Process Flow Tracking of Biomass Distribution Project (University of Mumbai): At Larsen & Toubro Infotech India Ltd., my team worked on a SCM (Supply Chain Management) based project titled 'Process Flow Tracking of Biomass Di...VS2010 Rc1 Fix: Illustrates a fix for working with the ASAP.NET Wizard control with VS2010 RC1Yicker: a microblog program devolep by c#.New ReleasesADO.Net DataSets to ExtJs.data.Store: Ext.net: This is the first version of Ext.net. This version contains a single class, Ext.net.Store which extends the Ext.data.Store class to consume ADO.Ne...AMP.Net Wrapper: AMP.Net v1.0: Provides abstraction for all the product search functionality offered by AMP.ArkSwitch: ArkSwitch legacy versions: Old versions - no need to download themArkSwitch: ArkSwitch v1.1.0: ArkSwitch v1.1.0Braintree Client Library: Braintree 1.0.0: Braintree .NET client library 1.0.0Business Framework: BusinessFramework preview: Early preview bits. See Rules for a sample.Business Framework: Samples: SamplesCC.Votd: CC.Votd 1.0.10.224: This is the initial release of CC.Votd. Marking as beta since I'm the only one who has used it up to this point.ChoServiceHost: ChoServiceHost.msi: Easy way to develop Windows Service applications in .NET 3.5/VS.NET 2008. (Installer)ChoServiceHost: ChoServiceHost-Src.zip: Easy way to develop Windows Service applications in .NET 3.5/VS.NET 2008. (Source Files)CHS Extranet: Beta 2.4: Beta 2.4 Release: Change Log: Added HTML preview options for XLS, XLSX, DOCX File Changes: ~/MyComputer.aspx ~/mycomputer.css ~/basestyle.css...Composure: AvalonDock-55751-VS2010.NET4: This is a "convenience build" of AvalonDock (drop 55751) for VIsual Studio 2010 and .NET 4.0. Nothing has been altered in the source code (which ...Data Access Component: Version 2.6: Add LINQ support.Desktop Google Reader: 1.3 Beta 1: New features: Read it Later included (see http://readitlaterlist.com/) Liking added (working: see number of liking users, see if liking yourself,...Explorer Plus: Explorer Plus v0.3: Amazon Locales AddedFree Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts 3.0.3 Released: Hi, Today we have released the final version of Visifire v3.0.3 which contains the following major features: * DataBinding. * IndicatorEn...Generic web part for hosting Silverlight content on SharePoint sites (WSS,MOSS): CTP: The objective of this release was to gather feedback from the wider community. I intend to pursue further development and make fixes wherever appro...HTML Forms in Windows Forms: HTMLForms 1.0: First Release.imgur uploader - .net open source uploader for image sharing site imgur: Release 2010-02-23-01: This is the first codeplex release! Let mayhem commence...Jeremi Stadler: Stick Tops 2.5: Sticktops is a very light program that makes it easy to paste stuff on small notes on the screen. All notes you have is saved on a server so you ca...kuuy static system: kss_v1.0beta sql: kss_v1.0beta sql scripts sourceMDownloader: MDownloader-0.15.2.55998: Fixed detecting uploading.com dead links; Added hiding rss entries without files;Mover: MoverLib for Silverlight 3: A first version of MoverLib for Silverlight 3.nHibernate Attribute mapping: 1.0: Source CodenHibernate Attribute mapping: Download 1: Zip fileNodeXL: Network Overview, Discovery and Exploration for Excel: NodeXL Class Libraries, version 1.0.1.113: The NodeXL class libraries can be used to display network graphs in .NET applications. To include a NodeXL network graph in a WPF desktop or Windo...NodeXL: Network Overview, Discovery and Exploration for Excel: NodeXL Excel 2007 Template, version 1.0.1.113: The NodeXL Excel 2007 template displays a network graph using edge and vertex lists stored in an Excel 2007 workbook. What's NewThis version inclu...OAuthLib: OAuthLib (1.6.0.0): Difference between previous version is as next. 7079 Make it possible to pass factory method of request in ObtainUnauthorizedRequestToken and Reque...patterns & practices SharePoint Guidance: SPG2010 Drop 5: SharePoint Guidance Drop Notes Microsoft patterns and practices ****************************************** ***************************************...PowerShell Remote File Explorer: PSRemoteExplorer 0.1: This release is the initial release of PowerShell remote file explorer. This enables the basic functionality of a remote file explorer. This also p...Reusable Library: v1.0.3: A collection of reusable abstractions for enterprise application developer.SharePoint Outlook Connector: Version 1.0.2.4: Version 1.0.2.4 Minor bugs have been fixed.Silverlight Server File Manager: First production release: This release is in production. Release on change set 37268.SIMD Detector: 2nd Release: Released C/CLI assembly project for use in CSharp and VB. Tested in CSharp console application. A Windows Form application coming soon. Projects ma...Source Analysis Policy: Source Analysis Policy v1.1 SP1: This release contains the compiled, and signed binaries in an installation package. This package also registers the policy with Microsoft Visual St...SpecExpress : A Fluent Validation Framework: SpecExpress 1.1: UpdatesAdded Validation Contexts feature Fixed bug with handling for Bool Types and Required MessageStore now allows for overriding individual ...VCC: Latest build, v2.1.30223.0: Automatic drop of latest buildVS2010 Rc1 Fix: RC1Fix01: This is a very simple project implementing a Microsoft Walkthrough at http://msdn.microsoft.com/en-us/library/wdb4eb30%28VS.100%29.aspx and the man...WPF AutoComplete TextBox Control: version 1.0: Initial releaseMost Popular ProjectsASP.NET Ajax LibraryManaged Extensibility FrameworkAccelerators for Microsoft Dynamics CRMWindows 7 USB/DVD Download ToolDotNetZip LibraryMDownloaderVirtual Router - Wifi Hot Spot for Windows 7 / 2008 R2MFCMAPIDroid ExplorerUseful Sharepoint Designer Custom Workflow ActivitiesMost Active ProjectsDinnerNow.netRawrBlogEngine.NETInfoServiceNB_Store - Free DotNetNuke Ecommerce Catalog ModuleRapid Entity Framework. (ORM). CTP 2SharpMap - Geospatial Application Framework for the CLRjQuery Library for SharePoint Web Servicespatterns & practices – Enterprise LibraryXcoordination Application Space

  Read the article

• Ich bin jetzt Oracle Certified Associate!

  - by britta.wolf

  Jan Peuker, Absolvent der Hochschule Augsburg und University of Melbourne, hat vor kurzem das Zertifikat Oracle Database 10g Administrator Certified Associate erworben. Er hat uns netterweise mit diesem kleinen Text versorgt: "Die Oracle Zertifizierung beginnt üblicherweise mit dem Oracle Certified Associate. Für diese Zertifizierung ist noch keine tiefgehende Praxiserfahrung notwendig. Um den Titel des Oracle Database 11g Administrator Certified Associate zu erlangen, muss man eine Prüfung zu SQL (z.B. 1Z0-051) sowie eine Prüfung zur Administration (1Z0-045) ablegen. Beide Prüfungen dauern 2 Stunden und haben ca. 80 Fragen von denen etwa drei Viertel richtig beantwortet werden müssen, um zu bestehen. Eine Note gibt es nicht. Die Prüfungen finden immer elektronisch statt, die Software erlaubt das Überspringen und Markieren von Fragen. Während meiner Arbeitszeit nach meinem ersten Studium hatte ich häufig mit dem Oracle Datenbanksystem zu tun. Als ich mein Aufbaustudium an der University of Melbourne absolvierte, wurde mir von der Studienberaterin vorgeschlagen, den Kurs „Advanced Database Administration" zu belegen. Dieser beruht vollständig auf den offiziellen Oracle Trainings-Unterlagen zur Prüfung in Oracle Administration und erlaubt daher die Teilnahme an der offiziellen Zertifizierung. Im Gegensatz zur SQL Prüfung, deren Inhalt man sich gut selbst aneignen kann, hilft bei der Administrator-Zertifizierung ein echter Kurs mit Seminar ungemein. Viele Konzepte lassen sich schwer aus einem Buch lernen. Die Bestandteile der SGA oder das Anlegen von Benutzern mögen leicht zugänglich sein, Redo- und Undo-Management sowie Backup und Recovery kann man nur verstehen, wenn man Beispiele hat und diese an einem Testsystem (keine "kleine" XE-Datenbank, sondern eine "richtige" Datenbank mit Enterprise Manager) ausprobieren kann. Übermäßig viel Zeit habe ich keinesfalls investiert, weil das Grundsystem sehr logisch ist. Für die weniger nachvollziehbaren Bereiche, besonders die neuen Features, habe ich mir Fachbegriffe auf Lernkarten geschrieben und die Trainingsunterlagen am System durchgespielt. Die Prüfung war für mich überraschend schwer, weil das einfache "Tagesgeschäft" deutlich unterrepräsentiert ist. In den Multiple-Choice-Fragen werden viele Besonderheiten und Use-Cases abgefragt (online findet man viele Beispielfragen). Da beide Tests in Englisch sind, sollte man nicht nur in der Terminologie des Oracle Datenbanksystems sondern auch in Fachbegriffen der Datenbankwelt allgemein bewandert sein. Oft machen einzelne Wörter (z.B. redundant oder synchronized, redo log oder redo log buffer) die richtige Antwort aus, ein signifikanter Anteil der Fragen beruht auf Zeichnungen oder Diagrammen, die beschrieben werden müssen. So muss man z.B. anhand eines Log-Auszugs beurteilen, warum die Datenbank nicht sauber geschlossen wurde. Allgemeines Wissen über Datenbanksysteme hilft leider nicht viel, da überproportional viele Fragen zu Oracle-spezifischen Themen gestellt werden, wie z.B. Optimierungs-Dienste (ADDM), Flashback, SQL Loader und ein wenig PL/SQL. Die SQL Prüfung ist dagegen sehr geradlinig - was aber nicht einfacher heißt. Hier kommt es mehr auf Auswendiglernen von Syntax an, was mir persönlich nicht liegt. Vor allem als Anwendungsprogrammierer kennt man oft proprietäre SQL-Funktionen nicht, es fällt schwer, sich einzelne Datumsberechnungsfunktionen, Typkonvertierungen, Namespaces oder krude Join-Methoden zu merken. Auf all dies wird in der Prüfung aber sehr viel Wert gelegt. Auch hier wird man wieder mit zweideutigen Multiple-Choice Fragen konfrontiert, bei denen sich z.B. nur die Reihenfolge der Parameter unterscheidet. Zudem sind die Parameter auch nicht ausgeschrieben, sondern in einem Entity-Relationship-Diagramm gegeben, wobei man auf die richtigen Datentypen achten muss. Mir persönlich war die Zeit fast zu knapp bemessen, weil man bei vielen Fragen erst ein Diagramm, einen Datenauszug oder einen längeren Text lesen muss, um dann die richtigen Statements zu finden. Hier helfen Lernkarten also nur bedingt - stattdessen üben, üben, üben. Durch den relativ niedrigen Pass-Score von 70% kann man es sich leisten, unsichere Fragen zuerst zu überspringen und erst nachdem alle sicheren beantwortet sind, zu überdenken. Die Prüfung ist auf jeden Fall fair. Ich habe durch das Oracle-Zertifizierungsprogramm viel gelernt. Die Datenbanken unter meiner Aufsicht laufen deutlich performanter und liefern höhere Verfügbarkeit, weil ich Probleme eliminieren konnte, die mir vorher nicht klar waren. Eine klassische Misskonfiguration, volle Archive Logs, weil diese mit zu lange gehaltenem Flashback-Speicher kollidieren, konnte ich bereits in einer der ersten Stunden meines Kurses an der Uni Melbourne mit Hilfe meines Professors klären. Beide Prüfungen waren problemlos parallel zu anderen Prüfungen zu absolvieren. Empfehlen kann ich eine gründliche Online-Recherche aber auch die Oracle Press-Bücher, welche mit Prüfungsfragen am Ende jedes Kapitels aufwarten. So spart man sich Zeit und ist trotzdem gut vorbereitet. Auch wenn ich keine Laufbahn als Administrator einschlagen werde, bin ich froh die zugrundeliegende Technologie vieler Anwendungen besser zu verstehen. Für meine tägliche Arbeit als Anwendungsentwickler hat es mir vor allem geholfen, Oracle-Konzepte z.B. im Bereich der Transaktionssteuerung und Wiederherstellung zu verstehen und damit viele Open Source Produkte jetzt sinnvoller bewerten und empfehlen zu können." Eine Übersicht der Zertifizierungspfade finden Sie auf der Oracle University Webseite (dann einfach "Deutschland""auswählen und anschließend auf den Punkt "Zertifizierungen" klicken).

  Read the article

• Trace File Source Adapter

  The Trace File Source adapter is a useful addition to your SSIS toolbox.  It allows you to read 2005 and 2008 profiler traces stored as .trc files and read them into the Data Flow.  From there you can perform filtering and analysis using the power of SSIS. There is no need for a SQL Server connection this just uses the trace file. Example Usages Cache warming for SQL Server Analysis Services Reading the flight recorder Find out the longest running queries on a server Analyze statements for CPU, memory by user or some other criteria you choose Properties The Trace File Source adapter has two properties, both of which combine to control the source trace file that is read at runtime. SQL Server 2005 and SQL Server 2008 trace files are supported for both the Database Engine (SQL Server) and Analysis Services. The properties are managed by the Editor form or can be set directly from the Properties Grid in Visual Studio. Property Type Description AccessMode Enumeration This property determines how the Filename property is interpreted. The values available are: DirectInput Variable Filename String This property holds the path for trace file to load (*.trc). The value is either a full path, or the name of a variable which contains the full path to the trace file, depending on the AccessMode property. Trace Column Definition Hopefully the majority of you can skip this section entirely, but if you encounter some problems processing a trace file this may explain it and allow you to fix the problem. The component is built upon the trace management API provided by Microsoft. Unfortunately API methods that expose the schema of a trace file have known issues and are unreliable, put simply the data often differs from what was specified. To overcome these limitations the component uses  some simple XML files. These files enable the trace column data types and sizing attributes to be overridden. For example SQL Server Profiler or TMO generated structures define EventClass as an integer, but the real value is a string. TraceDataColumnsSQL.xml  - SQL Server Database Engine Trace Columns TraceDataColumnsAS.xml    - SQL Server Analysis Services Trace Columns The files can be found in the %ProgramFiles%\Microsoft SQL Server\100\DTS\PipelineComponents folder, e.g. "C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TraceDataColumnsSQL.xml" "C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TraceDataColumnsAS.xml" If at runtime the component encounters a type conversion or sizing error it is most likely due to a discrepancy between the column definition as reported by the API and the actual value encountered. Whilst most common issues have already been fixed through these files we have implemented specific exception traps to direct you to the files to enable you to fix any further issues due to different usage or data scenarios that we have not tested. An example error that you can fix through these files is shown below. Buffer exception writing value to column 'Column Name'. The string value is 999 characters in length, the column is only 111. Columns can be overridden by the TraceDataColumns XML files in "C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TraceDataColumnsAS.xml". Installation The component is provided as an MSI file which you can download and run to install it. This simply places the files on disk in the correct locations and also installs the assemblies in the Global Assembly Cache as per Microsoft’s recommendations. You may need to restart the SQL Server Integration Services service, as this caches information about what components are installed, as well as restarting any open instances of Business Intelligence Development Studio (BIDS) / Visual Studio that you may be using to build your SSIS packages. Finally you will have to add the transformation to the Visual Studio toolbox manually. Right-click the toolbox, and select Choose Items.... Select the SSIS Data Flow Items tab, and then check the Trace File Source transformation in the Choose Toolbox Items window. This process has been described in detail in the related FAQ entry for How do I install a task or transform component? We recommend you follow best practice and apply the current Microsoft SQL Server Service pack to your SQL Server servers and workstations. Please note that the Microsoft Trace classes used in the component are not supported on 64-bit platforms. To use the Trace File Source on a 64-bit host you need to ensure you have the 32-bit (x86) tools available, and the way you execute your package is setup to use them, please see the help topic 64-bit Considerations for Integration Services for more details. Downloads Trace Sources for SQL Server 2005 -- Trace Sources for SQL Server 2008 Version History SQL Server 2008 Version 2.0.0.382 - SQL Sever 2008 public release. (9 Apr 2009) SQL Server 2005 Version 1.0.0.321 - SQL Server 2005 public release. (18 Nov 2008) -- Screenshots

  Read the article

• Cant correctly install Lazarus

  - by user206316

  I have a little problem with installing and running Lazarus. I just upgrade ubuntu from 13.04 to 13.10. When i had 13.04, i could install lazarus without any problems, but in 13.10 lazarus magicaly dissapeared, and when i tried install it from ubuntu software center, it said something like in my software resources lazarus-ide-0.9.30.4 doesnt exist. After some research on net i tried delete all files from earlier installations, download deb packages from sourceforge and install them, but when i want to instal fpc-src, error shows up with output: (Reading database ... 100% (Reading database ... 239063 files and directories currently installed.) Unpacking fpc-src (from .../Stiahnut/Lazarus/fpc-src.deb) ... dpkg: error processing /home/richi/Stiahnut/Lazarus/fpc-src.deb (--install): trying to overwrite '/usr/share/fpcsrc/2.6.2/rtl/nativent/tthread.inc', which is also in package fpc-source-2.6.2 2.6.2-5 dpkg-deb (subprocess): decompressing archive member: internal gzip write error: Broken pipe dpkg-deb: error: subprocess <decompress> returned error exit status 2 dpkg-deb (subprocess): cannot copy archive member from '/home/richi/Stiahnut/Lazarus/fpc-src.deb' to decompressor pipe: failed to write (Broken pipe) when i started lazarus, it of course tell me that it cant find fpc compier and fpc sources. So, please, i really need program for school and i dont wanna reinstall os anymore or something like that :( (Ubuntu 13.10 64bit) P.S: im not skilled in linux so if u know some commands to fix it just write them for copy and paste :) P.P.S:Sorry for bad English, im Slovak xD P.P.P.S: Thank so much for any answers update: output from sudo dpkg -l | grep "^rc" richi@Richi-Ubuntu:~/lazarus1.0.12$ sudo dpkg -l | grep "^rc" rc account-plugin-generic-oauth 0.10bzr13.03.26-0ubuntu1.1 amd64 GNOME Control Center account plugin for single signon - generic OAuth rc appmenu-gtk:amd64 12.10.3daily13.04.03-0ubuntu1 amd64 Export GTK menus over DBus rc appmenu-gtk3:amd64 12.10.3daily13.04.03-0ubuntu1 amd64 Export GTK menus over DBus rc fp-compiler-2.6.0 2.6.0-9 amd64 Free Pascal - compiler rc fp-utils-2.6.0 2.6.0-9 amd64 Free Pascal - utilities rc lazarus-ide-0.9.30.4 0.9.30.4-4 amd64 IDE for Free Pascal - common IDE files rc lazarus-ide-1.0.10 1.0.10+dfsg-1 amd64 IDE for Free Pascal - common IDE files rc lcl-utils-0.9.30.4 0.9.30.4-4 amd64 Lazarus Components Library - command line build tools rc lcl-utils-1.0.10 1.0.10+dfsg-1 amd64 Lazarus Components Library - command line build tools rc libbamf3-1:amd64 0.4.0daily13.06.19~13.04-0ubuntu1 amd64 Window matching library - shared library rc libboost-filesystem1.49.0 1.49.0-4 amd64 filesystem operations (portable paths, iteration over directories, etc) in C++ rc libboost-signals1.49.0 1.49.0-4 amd64 managed signals and slots library for C++ rc libboost-system1.49.0 1.49.0-4 amd64 Operating system (e.g. diagnostics support) library rc libboost-thread1.49.0 1.49.0-4 amd64 portable C++ multi-threading rc libbrlapi0.5:amd64 4.4-8ubuntu4 amd64 braille display access via BRLTTY - shared library rc libcamel-1.2-40 3.6.4-0ubuntu1.1 amd64 Evolution MIME message handling library rc libcolumbus0-0 0.4.0daily13.04.16~13.04-0ubuntu1 amd64 error tolerant matching engine - shared library rc libdns95 1:9.9.2.dfsg.P1-2ubuntu2.1 amd64 DNS Shared Library used by BIND rc libdvbpsi7 0.2.2-1 amd64 library for MPEG TS and DVB PSI tables decoding and generating rc libebackend-1.2-5 3.6.4-0ubuntu1.1 amd64 Utility library for evolution data servers rc libedata-book-1.2-15 3.6.4-0ubuntu1.1 amd64 Backend library for evolution address books rc libedata-cal-1.2-18 3.6.4-0ubuntu1.1 amd64 Backend library for evolution calendars rc libgc1c3:amd64 1:7.2d-0ubuntu5 amd64 conservative garbage collector for C and C++ rc libgd2-xpm:amd64 2.0.36~rc1~dfsg-6.1ubuntu1 amd64 GD Graphics Library version 2 rc libgd2-xpm:i386 2.0.36~rc1~dfsg-6.1ubuntu1 i386 GD Graphics Library version 2 rc libgnome-desktop-3-4 3.6.3-0ubuntu1 amd64 Utility library for loading .desktop files - runtime files rc libgphoto2-2:amd64 2.4.14-2 amd64 gphoto2 digital camera library rc libgphoto2-2:i386 2.4.14-2 i386 gphoto2 digital camera library rc libgphoto2-port0:amd64 2.4.14-2 amd64 gphoto2 digital camera port library rc libgphoto2-port0:i386 2.4.14-2 i386 gphoto2 digital camera port library rc libgtksourceview-3.0-0:amd64 3.6.3-0ubuntu1 amd64 shared libraries for the GTK+ syntax highlighting widget rc libgweather-3-1 3.6.2-0ubuntu1 amd64 GWeather shared library rc libharfbuzz0:amd64 0.9.13-1 amd64 OpenType text shaping engine rc libibus-1.0-0:amd64 1.4.2-0ubuntu2 amd64 Intelligent Input Bus - shared library rc libical0 0.48-2 amd64 iCalendar library implementation in C (runtime) rc libimobiledevice3 1.1.4-1ubuntu6.2 amd64 Library for communicating with the iPhone and iPod Touch rc libisc92 1:9.9.2.dfsg.P1-2ubuntu2.1 amd64 ISC Shared Library used by BIND rc libkms1:amd64 2.4.46-1 amd64 Userspace interface to kernel DRM buffer management rc libllvm3.2:i386 1:3.2repack-7ubuntu1 i386 Low-Level Virtual Machine (LLVM), runtime library rc libmikmod2:amd64 3.1.12-5 amd64 Portable sound library rc libpackagekit-glib2-14:amd64 0.7.6-3ubuntu1 amd64 Library for accessing PackageKit using GLib rc libpoppler28:amd64 0.20.5-1ubuntu3 amd64 PDF rendering library rc libraw5:amd64 0.14.7-0ubuntu1.13.04.2 amd64 raw image decoder library rc librhythmbox-core6 2.98-0ubuntu5 amd64 support library for the rhythmbox music player rc libsdl-mixer1.2:amd64 1.2.12-7ubuntu1 amd64 Mixer library for Simple DirectMedia Layer 1.2, libraries rc libsnmp15 5.4.3~dfsg-2.7ubuntu1 amd64 SNMP (Simple Network Management Protocol) library rc libsyncdaemon-1.0-1 4.2.0-0ubuntu1 amd64 Ubuntu One synchronization daemon library rc libunity-core-6.0-5 7.0.0daily13.06.19~13.04-0ubuntu1 amd64 Core library for the Unity interface. rc libusb-0.1-4:i386 2:0.1.12-23.2ubuntu1 i386 userspace USB programming library rc libwayland0:amd64 1.0.5-0ubuntu1 amd64 wayland compositor infrastructure - shared libraries rc linux-image-3.8.0-19-generic 3.8.0-19.30 amd64 Linux kernel image for version 3.8.0 on 64 bit x86 SMP rc linux-image-3.8.0-31-generic 3.8.0-31.46 amd64 Linux kernel image for version 3.8.0 on 64 bit x86 SMP rc linux-image-extra-3.8.0-19-generic 3.8.0-19.30 amd64 Linux kernel image for version 3.8.0 on 64 bit x86 SMP rc linux-image-extra-3.8.0-31-generic 3.8.0-31.46 amd64 Linux kernel image for version 3.8.0 on 64 bit x86 SMP rc screen-resolution-extra 0.15ubuntu1 all Extension for the GNOME screen resolution applet rc unity-common 7.0.0daily13.06.19~13.04-0ubuntu1 all Common files for the Unity interface.

  Read the article

• CodePlex Daily Summary for Thursday, April 29, 2010

  CodePlex Daily Summary for Thursday, April 29, 2010New ProjectsDesign Technology Laboratory: DTL project is prominent.Em-Lib: Electronic Music Library เป็นโปรแกรมที่พัฒนาขึ้นเพื่อให้เป็นห้องสมุดอิเล็กทรอนิกส์ โดยตัวโปรแกรมจะสามารถจำลองเครื่องดนตรี พร้อมข้อมูลที่เกี่ย...Extensions For ASP.NET: Extensions For ASP.NETFIM 2010 PowerShell Cmdlets: These PowerShell cmdlets let you manage objects in the Forefront Identity Manager 2010 web service easily and concisely. The five cmdlets let you e...Grunty OS: Grunty OS is a Free open source OS made my GruntXproductionsIrishDevelopers.net Test: IrishDevelopers.net TestJobping Url Shortener: MVC 2 project that Shortens urls Fully functioning 'bare bones' url shortening website. Just 1 page to create and display the short url. 'API' ...Made In Hell: Small console game. Just a training in code writings.manx: manx is a system for managing catalogs of technical documents. The system was created to handle the needs of the vintage computing community with ...ntn: playing around with new featuresOpen Bitrac: Bitrac is ASP.NET Blog SystemOpenNETCF.WindowsMobile.Ink: The Mobile Ink Library is a .NET component that provides support for the new Windows Mobile 6 WISP Lite API in your .NET Compact Framework applicat...Proxy Switch: Proxy switch is a program which allows the user to easily switch between a configured proxy server and a home network. The program is developed in ...Samcrypt: .Seoftware Evoluion Repository Mining: Project for mining data about develpoment effort from svn repository.SharePoint 2010 Bulk Document Importer: Need to import/migrate files and folders from servers and network shares into SharePoint 2010 document libraries? This free commandline application...SL2 - A Scala interpreter for L2: A simple L2 Interpreter. Just a project for a class.sMAPedit: -SocialCare: SocialCare - Team EUSOCIALSqlDiffFramework-A Visual Differencing Engine for Dissimilar Data Sources: Unique in database comparison, SDF lets you compare live data--or saved snapshots--from any combination of SQL Server, Oracle, MySql, or ODBC data ...Yasminuroban: Yasminuroban is an open source "Sokoban" (aka "Warehouse Keeper" or "Boxes") alike game totally written in DHTML (JavaScript, CSS and HTML) that us...Хрень для ао: Test project to implement Bot.New ReleasesAntySpam Microsoft Outlook Plugin: AntySpam Microsoft Outlook 2010 Plugin v.2.0.1: this release only tested on MS Outlook 2010 version: 14.0.4536.1000 (32-bit and 64-bit) part of Microsoft Office Professional Plus 2010. Source pro...AppFabric Caching Admin Tool: AppFabric Caching Admin Tool 1.2: System Requirements:.NET 4.0 RC AppFabric Caching Beta2 Refresh Test On:Win 7 (64x) Note: Must run as Administrator !!!AutoSPInstaller: Powershell script to pre-download prerequisites: This script will download all files required by Prerequisiteinstaller.exe in advance, in order to support an 'offline' installation of SharePoint 2...BeanProxy: BeanProxy 2.5: BeanProxy is a C# (.NET 3.5) library housing classes that facilitates unit testing. Any non-static, public interface/class/or abstract class can be...Bluetooth Radar: Verison 2.2.1: Please follow this link for the latest release - http://bluetoothradar.codeplex.com/releases/view/44232CSS 360 Planetary Calendar: LCA: Upload your LCA ppt pieces here. Then someone can merge them together.DeskNotes: DeskNotes 2.1.2: Version in development which features following improvements over DeskNotes 2.1.1: Each DeskNote can be made switchable between other windows on Wi...DotNetNuke Russian Language packs: Core Russian Language Pack for DNN 05.04.01: Core Russian Resource Language Pack for DNN 05.04.01 Русский языковый пакет для DNN 05.04.01DotNetNuke® Community Edition: 05.04.01: Major Highlights Fixed issue with assembly version type. Fixed issue with multiple cancel buttons on Add User screen. Fixed issue with ve...Event Scavenger: Version 3.2: Tweaked the import foreign logs functionality. Set version to 3.2 for Admin tool, service and database. Viewer unaffected.Event Scavenger: Version 3.2 stable: Update viewer version to 3.2 for consistency. Minor changes for rest.Event Scavenger: Version 3.2.2: Added setting to enable/disable creation of historic data.FIM 2010 PowerShell Cmdlets: Initial Release of FIM 2010 PowerShell Cmdlets: Initial release of FIM 2010 PowerShell cmdlets based on open source FIM web service client. Install by running installutil on Quest.FIMPowerhellSna...Fix.ly: Fix.ly 0.2: Fixed a bug where non-verbose mode would not workJobping Url Shortener: Deployment Code v0.1: Contains only the files necessary to run the Url Shortener website. Just provide a valid connection string in the web.configMetabolite Enterprise Libraries for EPiServer CMS using Page Type Builder: Metabolite Enterprise Libraries 1.1: This is the release of the Metabolite Enterprise Libraries 1.1 for use with EPiServer 5 R2 SP2 and Page Type Builder 1.1. If you want to get the s...Metabolite Enterprise Libraries for EPiServer CMS using Page Type Builder: Metabolite Enterprise Libraries 1.1 (source): This is the source code release of the Metabolite Enterprise Libraries 1.1 for use with EPiServer 5 R2 SP2 and Page Type Builder 1.1.MVC Music Store: MVC Music Store v0.8: This is the initial release of the MVC Music Store Tutorial. Download contains source and a tutorial document in PDF format.MyWSAT - ASP.NET Membership Administration Tool: MyWSAT v3.5.2: MyWSAT 3.5.2 Update Notes - April 28th 2010 1.) Fixed theme engine for administration area. Now I can create theme packages to make them available ...N2 CMS: 2.0 rc2: N2 is a lightweight CMS framework for ASP.NET. It helps you build great web sites that anyone can update. Major Changes (1.5 -> 2.0 release candid...NodeXL: Network Overview, Discovery and Exploration for Excel: NodeXL Excel 2007 Template, version 1.0.1.122: The NodeXL Excel 2007 template displays a network graph using edge and vertex lists stored in an Excel 2007 workbook. What's NewThis version signi...nRoute Framework: nRoute.Toolkit Release Version 0.4.5: Release Targets, Silverlight and WPF: - Targets Silverlight 4 for Web - Targets WPF in .NET 4 for Desktop nRoute Dependencies: - System.Windows...NSIS Autorun: NSIS Autorun 0.1.4: NSIS Autorun 0.1.4 This release includes source code, application binary, and example materials.OpenNETCF.WindowsMobile.Ink: Initial Release: This is the source as originally hosted in the OpenNETCF SVN server.Resharper Settings Manager: RSM v2.1: Warning! The 'Load Settings File...' menu item won't show up in VS 2008. Will release an update soon. ChangesReworked plug-in options UI: Split RSM...RoTwee: RoTwee (11.1.0.0): Rotation is improved from 11.0.0.3.SharePoint 2010 Bulk Document Importer: SharePoint 2010 Bulk Document Importer 1.0.0.0: Features in 1.0.0.0 Command line interface Import folders and files with all subfolders Can be run from outside the SharePoint Server. Every a...sMAPedit: sMAPedit v0.6 (Base): + base version containing the applicaion & html resourcesSocialCare: SocialCare_src: Codigo Fonte da Aplicação e Banco de DadosTFS Code Comment Checking Policy (CCCP): CCCP 4.0 for VS2010: This release installs side-by-side with CCCP 3.0 for VS2008 SP1.VCC: Latest build, v2.1.30428.0: Automatic drop of latest buildVCC: Latest build, v2.1.30428.1: Automatic drop of latest buildVCC: Latest build, v2.1.30428.2: Automatic drop of latest buildХрень для ао: Первый релиз: Пробую что это такое.Most Popular ProjectsRawrWBFS ManagerAJAX Control Toolkitpatterns & practices – Enterprise LibrarySilverlight ToolkitMicrosoft SQL Server Product Samples: DatabaseWindows Presentation Foundation (WPF)ASP.NETiTuner - The iTunes CompanionMicrosoft SQL Server Community & SamplesMost Active Projectspatterns & practices – Enterprise LibraryRawrHydroServer - CUAHSI Hydrologic Information System ServerIonics Isapi Rewrite FilterGMap.NET - Great Maps for Windows Forms & PresentationNB_Store - Free DotNetNuke Ecommerce Catalog ModuleParticle Plot PivotSqlDiffFramework-A Visual Differencing Engine for Dissimilar Data SourcesN2 CMSBlogEngine.NET

  Read the article

< Previous Page | 134 135 136 137 138 139 140 141 142 143 144 145  | Next Page >