Search Results

Search found 8275 results on 331 pages for 'bad appz'.

Page 139/331 | < Previous Page | 135 136 137 138 139 140 141 142 143 144 145 146  | Next Page >

• Forward a port with modem (with built-in but disabled router) + a separate router

  - by Youn

  I have a Motorola SBG6580 that is a modem and a wireless router in one. However, the wireless router part was bad so I disabled it and got a separate wireless router. I can go into the configuration pages of both the modem and the router now, and I'm confused as to which device needs to be configured for port-forwarding. I have a raspberry pi that I want to set up as a webserver. Do I configure the router, the modem, or both? Right now, the SBG6580's 1st LAN is connected to the wireless router's WAN, and the internet is working well. Note that the SBG6580 only has 4 ports, and I'm assuming they're LAN,as they are not labeled.

  Read the article

• How to disable passive mode in linux ftp command

  - by nute

  I am using the "ftp" command of linux to send data to a 3rd party provider. This company states that we need to "Disable passive mode in your FTP client", and I confirm it doesn't work in passive mode. However, when I googled the linux command, I see that the "-p" flag is "the default now for all clients (ftp and pftp) due to security concerns using the PORT transfer mode. The flag is kept for compatibility only and has no effect anymore." How do I disable passive mode then? And, is it that bad?

  Read the article

• How do you search for backdoors from the previous IT person?

  - by Jason Berg

  We all know it happens. A bitter old IT guy leaves a backdoor into the system and network in order to have fun with the new guys and show the company how bad things are without him. I've never personally experienced this. The most I've experienced is somebody who broke and stole stuff right before leaving. I'm sure this happens, though. So, when taking over a network that can't quite be trusted, what steps should be taken to ensure everything is safe and secure?

  Read the article

• Can't restore HDD using multiple programs

  - by jonney

  Please refer to my original question about this issue. I tried GetDataBack and it doesn't seem to scan or do anything. I chose the default settings from the first screen and then on step 1 I chose my HDD that's damaged. In step 2, nothing happens. It doesn't scan or do anythong, and on step 3 it doesn't display any of my files. I have also tried TestDisk and what happens in TestDisk is that when I try to fix and rebuild the MFT, it says this: MFT and MFT mirror are bad. Failed to repair them. Here is the status of that HDD under Testdrive: I also tried this app and got no results when I tried to recover the files. I keep getting this error: Last but not least, I tried Recuva and that simply says it's unable to read the MFT. Any suggestions? I have tried various apps already and none of them seems to work.

  Read the article

• Help make sense of a KillDisk error/log

  - by user284194

  I have a hard drive that I've been trying to reformat. I tried reformatting it in the windows XP and 7 installers, and in an Ubuntu live cd with gparted. I tried using dd to 'zero' the drive as well with no success. Finally I ran across KillDisk after a search. I tried to zero the disk again with KillDisk and after 8 hours of zeroing I get the following errors in the log: ----------------------------------------Erase Session Begin--------------------------------------- 2010-03-23 19:35:54 Active@ KILLDISK for Windows Build 5.1.39 started Target: WDC WD2500KS-00MJB0 232.9 GB Located on: WDC WD2500KS-00MJB0 (Serial number: WD-WCANK9604799) Erase method: One Pass Zeros (1 pass) Passes: 1 Bad (unwritable) sectors detected from 1701 to 488397167 on Hard Disk 1. Error (the handle is invalid) refreshing device Hard Disk 1. Error (the handle is invalid) reading sector 0 on 81h. 2010-03-24 02:28:25 Total number of erased device(s): 0, partition(s): 0 -----------------------------------------Erase Session End---------------------------------------- Is the drive dead?

  Read the article

• How to pass custom options to configure when building a package with debuild?

  - by TestUser16418

  Short background: I'm using Debian Sid. Currently the audacity package is conflicting with the pidgin package, because gstreamer0.10-plugins-bad are outdated. I'm trying to rebuild it, but one of the unit tests is failing as one plugin I don't need is causing a segfault. I need to disable these tests, and there's a configure option for that, but I don't know how to pass it. So, how can I run configure with custom options? Either by passing them to debuild, or by editing some file in the debian directory? I only worked with Gentoo ebuilds so far, which are extremely simple compared to the Debian control files, which I still find completely undecipherable.

  Read the article

• Good default for XDG_RUNTIME_DIR?

  - by cadrian

  The XDG Base Directory Specification is a very interesting spec for user directories. It also provides good default values, except for XDG_RUNTIME_DIR. Now I am writing a software that needs to create named pipes. It is a per-user client-server framework (there is a FIFO for the server and a FIFO per client). If XDG_RUNTIME_DIR is not defined, I am currently using a per-user subdirectory in /tmp — but it does not ensure all the specified conditions (viz. the paragraph starting with "The lifetime of the directory MUST be bound to the user being logged in…") Is /tmp/myserver-$USER good enough? Edit I saw elsewhere a few suggestions: . is quite unsatisfactory (at least because it is not an absolute path). I also saw /var/run/user/$USER — not bad, but that directory does not exist (at least on my box running a Debian testing)

  Read the article

• What's the most efficient method for moving and transcoding HD video from my Tivo to iTunes on OS X

  - by Bryan Schuetz

  I've got a Tivo with some HD recordings on it. I'd like to move those files over to my Mac and add them into iTunes. I'd like the move and transcoding to be as painless as possible, and I'd like to preserve the quality of the original HD recording. I've got a network connection to the Tivo and can move the files over but the real problem seems to be transcoding. I tried using MEncoder to transcode to H.264 but the quality really suffered. I was doing the conversion at 10mbps so I'm not sure why the quality was so bad, lots of artifacting, etc.

  Read the article

• How to create custom Live CD with upgraded linux-image kernel?

  - by ???

  I'm following this tutorial to customize a Live CD, http://www.debuntu.org/how-to-customize-your-ubuntu-live-cd However, it's failed to upgrade linux-image, I guess it's just can't update-grub. Any idea? EDIT I copied the custom/ directory into an ext4 image, now the linux-image-2.6.35-24 package is successfully upgrade. But as shown in the original CDROM, the vmlinuz-* and initrd.img-* file is moved out to /casper/vmlinuz and casper/initrd.lz. Well, I can move vmlinuz-2.6.34-24-generic to /casper/vmlinuz, but how to compress file initrd.img-2.6.35-24-generic in .lz format? (It looks like lzip, but it's not: ) # cd original-maverick/casper # lzip -d initrd.lz initrd.lz: bad magic number (file not in lzip format).

  Read the article

• What is the S.M.A.R.T. page?

  - by Mads Skjern

  I've just listened to Steve Gibson talk about his SpinRite software, on the Security Now podcast episode 336 (transscript). At 33:20 he says: I can show and do show on the SMART page that sectors are being relocated and that errors are being corrected. That SMART analysis page sometimes scares people because it shows, wait a minute, this thing says we're correcting so many errors per megabyte. What is this SMART page? 1) Some information saved on the HD by SMART, that I can access with a SMART tool like smartmontools? 2) A page (tab) in his SpinRite software? In any case, can I see, in any way, what sectors are marked as bad, without using SpinRite? Preferably using smartmontools!

  Read the article

• Proffesional video editor that can handle FLV?

  - by acidzombie24

  I tried Adobe Premiere Pro CS3 and was not able to open my file (unsupported format). Media player can open it thanks to ffdshow (tryouts IIRC). Premiere doesnt seem to want to use ffdshow. I tried renaming it to AVI and hoped Premiere would open it via ffdshow but it didnt and i checked and disabled the dont use ffdshow option in ffdshow video decoder option. What is a good proffesional video editor that can handle FLV? All ffmpeg based editors died on it and virtualdub got close but had a bad framerate. Probably bc it didnt know it was a streaming vid and the start is 26mins of 31min video. More info here but what can i use to open and properly convert flv video http://superuser.com/questions/50779/windows-media-based-video-audio-converter

  Read the article

• Copying Firefox profile

  - by ChrisW

  My computer (well, Windows XP) failed. I got everything off the HD, including my Firefox profile, which I especially wanted because I had lots of open unsaved tabs in my current session (yes, I know that's bad practice!), but also to rescue bookmarks etc. I've now got Windows 7, and reinstalled Firefox. I've read the instructions on the Firefox website about creating new profiles, and I'm not sure they're very intuitive. It says that you can copy all the contents from an old profile into a new 'default' one, which I have done (http://support.mozilla.org/en-US/kb/back-and-restore-information-Firefox-profiles). However, when I open Firefox, the data from this profile isn't being used and Firefox doesn't seem to recognise the data that's there. What am I doing wrong?!

  Read the article

• Creative software leftovers - ASIO error message

  - by Tony Patriarche

  I temporarily installed an old Creative Audigy 2 soundboard on my Vista x64 Home Premium computer. Bad idea! I uninstalled the board & all software visible on the control panel. Now, with one particular app. (Sibelius) I keep getting a start-up message "CTASIO Warning: Creative ASIO: there are no Creative audio products installed on the system that support ASIO". I offer this as a candidate for "Most useless message", but that's beside the point. I used a commercial registry cleaner (PC-Tools Registry Mechanic) and then edited the registry looking for "creative", "audigy" and "ASIO". After removing everything I could find, I still get the message. Any suggestions?

  Read the article

• File Saving Sometimes Fails

  - by YellPika

  When I attempt to save files, it sometimes (randomly) fails. In Blender, I sometimes get "Version Backup Failed: File Saved With @". In Visual Studio, building sometimes fails with an error message indicating that the target file/exe cannot be overwritten. If I wait a bit, I can save fine. It's almost as if programs are taking an abnormal amount of time to 'let go' of the files. What could be causing this behaviour? This seems to be caused by Windows Live Mesh monitoring my files, and locking them whenever it uploads the new versions (BAD considering the amount of times I save my files, even redundantly). Any suggestions to work around this behaviour? Should I switch to a better service to sync my files?

  Read the article

• CentOS: revert python version back to original

  - by NP

  Hi all, I installed python 2.6 using the instructions here on CentOS 5.4. However I realized it was a bad move and I need to revert back to 2.4, which was there originally. Can anyone guide me on how to undo what I did here? In particular, I am not sure how to undo this: Configure ld to find your shared libs: $ cat /etc/ld.so.conf.d/opt-python2.5.conf /opt/python2.5/lib (hit enter) (hit ctrl-d to return to shell) $ ldconfig I tried removing the alias and the symlink and even re-aliasing python to /usr/bin/python, but when I try to install an RPM i get this error: error: Failed dependencies: libpython2.4.so.1.0 is needed by ... Thanks in advance.

  Read the article

• Is the motherboard the cause of these errors?

  - by ianfuture

  Motherboard is : ASUS A7N8X-E Deluxe, Rev1.01, On start up get: "cmos checksum error - defaults loaded" error BIOS is reset everytime and can't boot to Windows off HDD. POST report is ok once I tell it there is no Floppy drive attached and not to seek it. The boot sequence starts then just as get to load windows safe mode options whole PC shuts down. BIOS is reset to defaults again. I've checked the battery and jumpers. Tried a known working battery. Changed Graphics card, changed memory, changed HD to one without an OS. Disconnected DVD drive. PSU is known to be ok. IN BIOS CPU is recognised correctly and memory is also recognised ok. So is it likely to be a bad motherboard or corrupted BIOS or something else? Thanks :)

  Read the article

• Converting mp3 to ogg, suggestive?

  - by watain

  I'm thinking about converting my mp3 based music library to ogg, due to ogg being a free and open standard format (I guess there are other reasons too). As far as I know there's a chance of losing some sound quality when converting mp3 to ogg and vice versa (?). Would you suggest converting mp3 to ogg, or is it such a bad idea that I'd have to rip all CDs to ogg instead of converting? (if this would turn up I'd rip to flac anyway I guess). How would I be able to convert mp3 to ogg the easiest way, copying ID3-Tags too? (on a *nix-based environment) Best regards!

  Read the article

• How to change the $PATH in Mac OSX

  - by Samuel Elgozi

  I've installed git via the instaler and not with terminal with commands, and my $PATH changed, the path to the 'local' git was added the the end of the variable, and my $PATH changed to this: /usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/local/git/bin However, that doesnt help me, because i the path to Xcode's git comes first. so what I've done is the next, I added this lines to my '.bash_profile': export PATH="/usr/local/git/bin:$PATH" and now my path is the next: /usr/local/git/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/local/git/bin And I wanted to know how to remove the duplication from the end of the Path so I end up with: /usr/local/git/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin Thanks Ahead! And sorry if my english is too bad..

  Read the article

• How to do hooking in Java? [closed]

  - by chimpaburro

  A hook is a process running to get data from another (more info), well the case was that I wanted to get the methods or functions using any application for access to a network, these methods are usually WSAConnect (), WSASendTo (), bind (), connect () and sendto () [these are the ones that need to get to the application]. I started testing, creating Runtime [Runtime.getRuntime (). exec (...)] with all possible methods [addShutdownHook (...);] and now I'm trying to ProcessBuilder [new ProcessBuilder (...);] and the famous BufferedReader [new BufferedReader (new InputStreamReader (proceso.getInputStream ()));] but I could not find the way to do it. Sorry for my bad English..

  Read the article

• Firewall blocks FTP PASV response

  - by harper

  0 down vote favorite I have an FTP server that supports passive server mode (using PASV command). This works fine with Windows XP. When I want to access this server from Windows Vista or Windows 7 with firewall enabled I experience a immediate connection shutdown. A reset packet is sent to the server, the socket is signaled that the server had reset the connection (what is not true). The problem disappears when the firewall is disabled. Connections to other FTP servers work correctly. The difference is that the servers response to PASV does not enclose the address field with parentheses. This is legal as documented in RFC-959 and RFC-1132. How can I configure the firewall to stop this bad behavior?

  Read the article

• Cannot save iTunes library

  - by ongle

  Ever since I began using Windows 7 x64, I have been getting an infrequent error when using iTunes which goes something like this: The iTunes Library file cannot be saved. You do not have enough access privileges for this operation. Up until today this seemed to have no bad side effect but today I got the error, exited iTunes and started it back up only to discover my entire library was empty (the .xml file seemed to have been initialized). While I can restore my library from backup, this is pretty frustrating. Enough so that I may move the library to a MAC and sync there. I have reset the permissions on the folder. I have excluded the file from anti-virus scan. Neither of these things helped.

  Read the article

• Why should krfb use so much cpu when I never use it?

  - by Newton Falls

  I was playing around with KSysGuard and I noticed the process using the most cpu was krfb, which is the server process for desktop sharing. I never use desktop sharing so I suppose it is a default loaded process. Why would this process use so much juice (around 15%) when I never use it and it really shouldn't be doing much of anything? I don't see any network activity so I don't think I am being hacked. I have suspended the process and nothing bad seems to have happened. Can I assume this is a safe thing to do?

  Read the article

• SMTP port open - but not open

  - by Frederik Nielsen

  As some of you might know, I am setting up an exchange server. Now I ran into another problem: I cannot connect to the SMTP service from outside the server! The ports are opened in the gateway device (a ZyXEL USG50), Windows firewall is off. I see the packets travekl through the ZyXEL firewall, and I can also see the packets with wireshark on the server, so I know they are getting all the way in to the server. I also know it receives them, and sends out the reply - and this is where things go bad! Analyzing with wireshark, I get these errors in the return packets: Header checksum: 0x0000 [incorrect, should be 0x0779 (may be caused by "IP checksum offload"?)] And: Acknowledgment Number: 0x8e3337d1 [should be 0x00000000 because ACK flag is not set] What the (sorry my French) hell is going on? I really cant figure it out.. Thanks in advance.

  Read the article

• Is there a way to make NoScript always allow .pdf files?

  - by Ben

  I'm using Firefox with NoScript to stop the bad stuff. I've also told Acrobat Reader to load .pdf files in it's own window instead of inside the browser (because sometimes it locks up, and then I would have to restart the browser). However, whenever I come across a .pdf file, I always get a new tab completely covered by the NoScript box. Then, I can click anywhere in that page, and NoScript asks me if I'm sure I want to allow it. Then, Acrobat Reader is launched in its own window, but the Firefox tab remains, and I have to close it. It seems like NoScript is getting in the way of Acrobat's attempt to just open the file without making a new tab. Is there a way to tell NoScript to always allow .pdf files (Or any other suggestion to make that annoying blank tab go away by itself)?

  Read the article

• How to adjust Aspect Ratio in Windows Media Center

  - by Svish

  Is there any way of adjusting the aspect ratio of movies I view in Windows Media Center on Windows 7 RTM x64? Any hidden features? Any brilliant light weight plugins? Using Shark007 Codecs, and otherwise just default Media Center and Media Player. I know I could reprocess the videos, but that would probably ruin the already bad quality. I also know I could use VLC media player, but I really would like to find a solution that works in Media Center, since VLC media player isn't especially Remote Control and media collection friendly... Update: By the way, I know I can Ctrl+Drag an edge of the media center in window mode and change the aspect ratio of the player, but that doesn't do anything to the video.

  Read the article

< Previous Page | 135 136 137 138 139 140 141 142 143 144 145 146  | Next Page >