Search Results

Search found 67705 results on 2709 pages for 'time management'.

Page 139/2709 | < Previous Page | 135 136 137 138 139 140 141 142 143 144 145 146  | Next Page >

• Openswan + xl2tpd connections time out after a while

  - by Halfgaar

  I have a non-NATed Openswan+xl2tpd server (Ubuntu 12.04), to which I connect with a Windows 8 behind NAT. The client loses its connection after a while of doing nothing (between 30 and 60 minutes, but I didn't time it). The client doesn't have enabled that it should kill inactive connections. Nor does it ever go into sleep mode. I also tried setting the kill-after-time to 24 hours, but that didn't help. The NAT router behind which the client located is Debian Linux, and its router is a Cisco which connects us directly to the data center where the server is. None of our other connections, like SSH, get dropped with inactivity (because of cheap routers). I did however try turning on the keepalives in /etc/ipsec.conf: config setup (...snip...) nat_traversal=yes force_keepalive=yes keep_alive=10 but that didn't help. As you can see in the config later, dead peer detection's action is clear. That would be a first suggestion to fix, but I need clear, because people will be connecting from everwhere but the kitchen sink. Besides, as I said, in the test setup I have now, I can't see any device killing its connection. (edit: 'restart' also has the same effect) These are of one time it happened: Jul 18 16:18:06 host xl2tpd[1918]: Maximum retries exceeded for tunnel 49070. Closing. Jul 18 16:18:06 host xl2tpd[1918]: Terminating pppd: sending TERM signal to pid 18359 Jul 18 16:18:06 host xl2tpd[1918]: Connection 4 closed to 89.188.x.y, port 1701 (Timeout) Jul 18 16:18:11 host xl2tpd[1918]: Unable to deliver closing message for tunnel 49070. Destroying anyway. and these on another: Jul 18 17:44:39 host xl2tpd[1918]: udp_xmit failed to 89.188.x.y:1701 with err=-1:Operation not permitted Jul 18 17:44:43 xl2tpd[1918]: last message repeated 4 times Jul 18 17:44:43 host xl2tpd[1918]: Maximum retries exceeded for tunnel 10918. Closing. Jul 18 17:44:43 host xl2tpd[1918]: udp_xmit failed to 89.188.x.y:1701 with err=-1:Operation not permitted Jul 18 17:44:43 host xl2tpd[1918]: Terminating pppd: sending TERM signal to pid 26338 Jul 18 17:44:43 host xl2tpd[1918]: Connection 6 closed to 89.188.x.y, port 1701 (Timeout) Jul 18 17:44:44 host xl2tpd[1918]: udp_xmit failed to 89.188.x.y:1701 with err=-1:Operation not permitted Jul 18 17:44:48 xl2tpd[1918]: last message repeated 3 times Jul 18 17:44:48 host xl2tpd[1918]: Unable to deliver closing message for tunnel 10918. Destroying anyway. Jul 18 17:44:59 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:44:59 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:09 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:09 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:19 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:19 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:29 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:29 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:39 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:39 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:49 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:49 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Versions: Ubuntu 12.04 Openswan: 2.6.37-1 xl2tpd: 3.1+dfsg-1 kernel: 3.2.0-49-generic configs: /etc/ipsec.conf: version 2.0 # conforms to second version of ipsec.conf specification config setup nat_traversal=yes virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12,%v4:!10.152.2.0/24 oe=off protostack=netkey force_keepalive=yes keep_alive=10 conn L2TP-PSK-NAT rightsubnet=vhost:%priv also=L2TP-PSK-noNAT conn L2TP-PSK-noNAT authby=secret pfs=no auto=add keyingtries=2 rekey=no dpddelay=30 dpdtimeout=120 dpdaction=clear ikelifetime=8h keylife=1h type=transport left=%defaultroute leftprotoport=17/1701 right=%any rightprotoport=17/%any /etc/xl2tpd/xl2tpd.conf [global] ipsec saref = no [lns default] ip range = 10.152.2.2-10.152.2.254 local ip = 10.152.2.1 refuse chap = yes refuse pap = yes require authentication = yes ppp debug = no pppoptfile = /etc/ppp/options.xl2tpd length bit = yes /etc/ppp/options.xl2tpd: require-mschap-v2 refuse-mschap ms-dns 10.152.2.1 asyncmap 0 auth crtscts idle 1800 mtu 1200 mru 1200 lock hide-password local #debug name l2tpd proxyarp lcp-echo-interval 30 lcp-echo-failure 4

  Read the article

• HTTP downloads stop after some time, resuming is not possible

  - by cdauth

  When I try to download a file via HTTP, the downloads sometimes stop after around 30 MB. The download rates goes down to 0 B/s and no data keeps coming. When I stop the download and resume again, the download still hangs. But when I redownload it from byte 0 again, everything works fine up to 30 MB when it stops again. Sometimes, after some hours, it just works again without problems. The position in the file when the download stops is variable, but most of the time it is around 30–35 MB. As a download manager I use wget. The same behaviour happens though using curl and other download managers. The error occurs independently of the server I download from. I have also observed this error on other Linux computers in my network. All computers on my network run Gentoo Linux on x86. All internet connections on my network go through a server on my network which runs a transparent Squid proxy on port 80. That server is connected to a router, which is a Speedport W 700V by Deutsche Telekom AG. That router is connected to the internet using ADSL, with 448 kbit/s down speed and 96 kbit/s up speed. I am almost sure that my transparent proxy is not the problem. I turned that off without resolving the issue. I also connected to the router directly via WLAN without resolving the issue. I also tried to download over another port via HTTP. Furthermore, I tried to download the file using IPv6 with a gateway6 tunnel from my computer, which resulted in exactly the same problem. Now the strange thing is that everything works fine using FTP and HTTPS (also with wget on the same computer). Even more strange: when I resume the download that hanged over HTTP using FTP or HTTPS, download a few bytes that way, stop wget and then resume again using HTTP, it loads data again! But after a few MB, it may stop again. Unfortunately, files downloaded that way are always broken (the MD5 sum is not correct), so at some point, there must have been bogus data. I tried searching for HTML error messages in the downloaded file, but grep -i html does not find anything. (I cannot think of a way to search for GZIP-compressed HTML error messages in the file, so I did not try that.) I tried using strace on wget when it failed to resume a download, you can find the entire output on pastebin. The important lines are repeated every second: clock_gettime(CLOCK_MONOTONIC, {326102, 62176435}) = 0 ) = 1 write(2, "78% [++++++++++++++++++++++++++++"..., 19578% [+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ] 110,683,685 --.-K/s ) = 195 select(4, [3], NULL, NULL, {0, 949999}) = 0 (Timeout) I have absolutely no idea what could be the reason of this problem. It seems like whatever causes the issue speaks HTTP. It seems to speak HTTP that intelligently that it even regognises it in an IPv6-over-IPv4 tunnel. But what could that be and why does it only happen sometimes? The other possibility would be that there is a problem on my computer that is the same on other Gentoo Linux computers as well. Has anyone ever had such a problem? What could be the reason and where do I have to continue investigating to find out more about the issue? Update: I have just run into the problem again and tried to resume the download over the router’s WLAN, and this time it worked. Maybe I did something wrong during my last tests with the WLAN. Now maybe my transparent proxy server is in fact the problem. It is a very basic Squid proxy server that does not cache anything. Maybe the fact is interesting that a second Squid proxy runs on the same computer on another port. Update: A download hung again and this time I turned off all firewall settings and stopped all proxy servers. I failed to resume the download from my network server, which is directly connected to the router. So my proxy server definitely is not the cause the problem. I will try to upgrade the firmware of my router now, although I do not have admin access to it. I will see what I can do.

  Read the article

• Difference between dates

  - by Ben C

  I want to calculate the difference between two times, one of which is the current time, and the other is just in the format HH:MM, always in the future. If I just subtract $futuretime from $now, it should, of course, be a positive number. This works fine until... If $now is in the afternoon or evening and $futuretime is, say, 7AM next morning, how can I force it to understand the the time is always going to be in the future? (It's for working out the time of something that occurs about every half an hour during working hours, and then stops until the following morning) Thanks in advance!

  Read the article

• How to convert "9:00 PM EST" to a Date object

  - by Bara

  I am developing an Android application and require some basic datetime manipulation. I have a Date object (from Java.util.Date) holding a specific date. I need to add a specific time to it. The time I have is a string in this format: "9:00 PM EST" How would I "add" this time to the previous date? If the Date object currently has: "4/24/10 00:00:00" How would I change it to instead be: "4/24/10 09:00:00 EST" I would prefer to do this without the use of an external library, if possible.

  Read the article

• Database Change Management - Setup for Initial Create Scripts, Subsequent Migration Scripts

  - by Martin Aatmaa

  I've got a database change management workflow in place. It's based on SQL scripts (so, it's not a managed code-based solution). The basic setup looks like this: Initial/ Generate Initial Schema.sql Generate Initial Required Data.sql Generate Initial Test Data.sql Migration 0001_MigrationScriptForChangeOne.sql 0002_MigrationScriptForChangeTwo.sql ... The process to spin up a database is to then run all the Initlal scripts, and then run the sequential Migration scripts. A tool takes case of the versioning requirements, etc. My question is, in this kind of setup, is it useful to also maintain this: Current/ Stored Procedures/ dbo.MyStoredProcedureCreateScript.sql ... Tables/ dbo.MyTableCreateScript.sql ... ... By "this" I mean a directory of scripts (separated by object type) that represents the create scripts for spinning up the current/latest version of the database. For some reason, I really like the idea, but I can't concretely justify it's need. Am I missing something? The advantages would be: For dev and source control, we would have the same object-per-file setup that we're used to For deployment, we can spin up a new DB instance to the latest version either by running the Initial+Migrate, or by running the scripts from Current/ For dev, we do not need a DB instance running in order to do development. We can do "offline" development on the Current/ folder. The disadvantages would be: For each change, we need to update the scripts in the Current/ folder, as well as create a Migration script (in the Migration/ folder) Thanks in advance for any input!

  Read the article

• SQL Quey slow in .NET application but instantaneous in SQL Server Management Studio

  - by user203882

  Here is the SQL SELECT tal.TrustAccountValue FROM TrustAccountLog AS tal INNER JOIN TrustAccount ta ON ta.TrustAccountID = tal.TrustAccountID INNER JOIN Users usr ON usr.UserID = ta.UserID WHERE usr.UserID = 70402 AND ta.TrustAccountID = 117249 AND tal.trustaccountlogid = ( SELECT MAX (tal.trustaccountlogid) FROM TrustAccountLog AS tal INNER JOIN TrustAccount ta ON ta.TrustAccountID = tal.TrustAccountID INNER JOIN Users usr ON usr.UserID = ta.UserID WHERE usr.UserID = 70402 AND ta.TrustAccountID = 117249 AND tal.TrustAccountLogDate < '3/1/2010 12:00:00 AM' ) Basicaly there is a Users table a TrustAccount table and a TrustAccountLog table. Users: Contains users and their details TrustAccount: A User can have multiple TrustAccounts. TrustAccountLog: Contains an audit of all TrustAccount "movements". A TrustAccount is associated with multiple TrustAccountLog entries. Now this query executes in milliseconds inside SQL Server Management Studio, but for some strange reason it takes forever in my C# app and even timesout (120s) sometimes. Here is the code in a nutshell. It gets called multiple times in a loop and the statement gets prepared. cmd.CommandTimeout = Configuration.DBTimeout; cmd.CommandText = "SELECT tal.TrustAccountValue FROM TrustAccountLog AS tal INNER JOIN TrustAccount ta ON ta.TrustAccountID = tal.TrustAccountID INNER JOIN Users usr ON usr.UserID = ta.UserID WHERE usr.UserID = @UserID1 AND ta.TrustAccountID = @TrustAccountID1 AND tal.trustaccountlogid = (SELECT MAX (tal.trustaccountlogid) FROM TrustAccountLog AS tal INNER JOIN TrustAccount ta ON ta.TrustAccountID = tal.TrustAccountID INNER JOIN Users usr ON usr.UserID = ta.UserID WHERE usr.UserID = @UserID2 AND ta.TrustAccountID = @TrustAccountID2 AND tal.TrustAccountLogDate < @TrustAccountLogDate2 ))"; cmd.Parameters.Add("@TrustAccountID1", SqlDbType.Int).Value = trustAccountId; cmd.Parameters.Add("@UserID1", SqlDbType.Int).Value = userId; cmd.Parameters.Add("@TrustAccountID2", SqlDbType.Int).Value = trustAccountId; cmd.Parameters.Add("@UserID2", SqlDbType.Int).Value = userId; cmd.Parameters.Add("@TrustAccountLogDate2", SqlDbType.DateTime).Value =TrustAccountLogDate; // And then... reader = cmd.ExecuteReader(); if (reader.Read()) { double value = (double)reader.GetValue(0); if (System.Double.IsNaN(value)) return 0; else return value; } else return 0;

  Read the article

• Help needed implementing a web based file management system with a file hierarchy system, help neede

  - by molleman

  Hello i am trying to create a web application that will allow users to upload files online, i am using gwt while using hibernate for database communication, i am able to upload file to a server , and store them on the server. but what i want is to associate the files with a user. i want the user to be able to create folders and store a file in sub folders. my logic was to use the composite pattern to store folders and fileLocations with a user but i am am finding it difficult to implement this so i can show the files and folders within a gwt tree. what would be the best way to implement a hierarchy of folders and information of the location of a file so it could be displayed in a gwt tree? what i did have was a User would hold a reference to a root folder and then each sub folder could hold folders or fileLocations. i used the composite pattern to implement the file hierarchy, but when i want to display a the contents of a folder i need a for loop for each list. so i could a folder within a folder within a folder that would need 3 for loops to show the contents of my folders. What is the best way to implement this file management system. so what do you guys think?

  Read the article

• Memory management in ObjC/iPhone

  - by Manu

  Hi, I have question in memory management (objective C). There are two ideal scenario. ============================= scenario 1 ======================================== (void) funcA { MyObj *c = [otherObj getMyObject]; [c release]; } -(MyObj *) getMyObject //(this method is available in other OtherObj.m file) { MyObj *temp = [[MyObj alloc] init]; // do smothing here return temp; } ============================= scenario 2 ======================================== (void) funcA { MyObj *c = [otherObj getMyObject]; } -(MyObj *) getMyObject //(this method is available in other OtherObj.m file) { MyObj *temp = [[myObj alloc] init]; // do smothing here return [temp autorelease]; } myObj is holding huge chunk of data. In first scenario I am getting myObj(allocated) from other file so I have to release in my own method. (as per any C/C++ language library ,like strdup will return string duplicate which will realase later by developer not by strdup method). In second scenario I am getting myObj(allocated) from otherObj.m file so otherObj.m file is responsible to release that allocated memory(mean autorelease)? Is it right? Please let me know Which scenario is more efficient and valid as per apple memory guidelines. Please Please don't show me any document link. Thanks Manu

  Read the article

• SQL Query slow in .NET application but instantaneous in SQL Server Management Studio

  - by user203882

  Here is the SQL SELECT tal.TrustAccountValue FROM TrustAccountLog AS tal INNER JOIN TrustAccount ta ON ta.TrustAccountID = tal.TrustAccountID INNER JOIN Users usr ON usr.UserID = ta.UserID WHERE usr.UserID = 70402 AND ta.TrustAccountID = 117249 AND tal.trustaccountlogid = ( SELECT MAX (tal.trustaccountlogid) FROM TrustAccountLog AS tal INNER JOIN TrustAccount ta ON ta.TrustAccountID = tal.TrustAccountID INNER JOIN Users usr ON usr.UserID = ta.UserID WHERE usr.UserID = 70402 AND ta.TrustAccountID = 117249 AND tal.TrustAccountLogDate < '3/1/2010 12:00:00 AM' ) Basicaly there is a Users table a TrustAccount table and a TrustAccountLog table. Users: Contains users and their details TrustAccount: A User can have multiple TrustAccounts. TrustAccountLog: Contains an audit of all TrustAccount "movements". A TrustAccount is associated with multiple TrustAccountLog entries. Now this query executes in milliseconds inside SQL Server Management Studio, but for some strange reason it takes forever in my C# app and even timesout (120s) sometimes. Here is the code in a nutshell. It gets called multiple times in a loop and the statement gets prepared. cmd.CommandTimeout = Configuration.DBTimeout; cmd.CommandText = "SELECT tal.TrustAccountValue FROM TrustAccountLog AS tal INNER JOIN TrustAccount ta ON ta.TrustAccountID = tal.TrustAccountID INNER JOIN Users usr ON usr.UserID = ta.UserID WHERE usr.UserID = @UserID1 AND ta.TrustAccountID = @TrustAccountID1 AND tal.trustaccountlogid = (SELECT MAX (tal.trustaccountlogid) FROM TrustAccountLog AS tal INNER JOIN TrustAccount ta ON ta.TrustAccountID = tal.TrustAccountID INNER JOIN Users usr ON usr.UserID = ta.UserID WHERE usr.UserID = @UserID2 AND ta.TrustAccountID = @TrustAccountID2 AND tal.TrustAccountLogDate < @TrustAccountLogDate2 ))"; cmd.Parameters.Add("@TrustAccountID1", SqlDbType.Int).Value = trustAccountId; cmd.Parameters.Add("@UserID1", SqlDbType.Int).Value = userId; cmd.Parameters.Add("@TrustAccountID2", SqlDbType.Int).Value = trustAccountId; cmd.Parameters.Add("@UserID2", SqlDbType.Int).Value = userId; cmd.Parameters.Add("@TrustAccountLogDate2", SqlDbType.DateTime).Value =TrustAccountLogDate; // And then... reader = cmd.ExecuteReader(); if (reader.Read()) { double value = (double)reader.GetValue(0); if (System.Double.IsNaN(value)) return 0; else return value; } else return 0;

  Read the article

• Prerequisites for Account management via an IPhone App?

  - by Icky

  Hello. I have been reading a couple of threads for this topic on this site. I want to create an App, which communicates with a server and has the following features: the User can create/manage an account on the server the App communicates with the server via a secure connection the User is updated about important news through messages From what I understood so far, I need to take care of the following: establish a secure connection with the server send account information(user data, password) to the server and authenticate the client side management and encryption of account data/information is handled by the server, so the App only sends data, the server stores/encrypts (no need for me to take care of anything) So far, I think, I have covered the most important features. I have read, that NSURLConnection can be used, to send the authentication data. But how is further communication ensured? And how is the encryption managed? Are there any useful tutorials on this, because this is the first time I delve into this topic, and any guidance is greatly appreciated! Also, if I have missed anything important (e.g. with managing accounts) please tell me.

  Read the article

• software distribution and patch management

  - by daemonkid

  How do software houses like Microsoft or anti-virus companies patch/update their software? Anti virus companies dont send the complete executable; only new virus signatures I suppose. Similarly, Ive noticed microsoft sends certain files to the '$NtUninstallKB......$' folder that it creates when it the windows update program runs. I suppose there is an installer in each such folder there that replaces only those dlls that need to be updated or fixed. Questions Is there a universal method for doing this or does each house employ their own methods? I dont want to re-send the entire application to each individual client. Suppose if only certain dlls need to be changed or maybe some more added, how should I go about planning my final compiled application. Do I need to look at separating my application into multiple assemblies? If yes, then is there some compilation method that is allows to pack specific classes into a particular dll? What I have put down here are my thoughts on the subject and I could be wrong. Could anyone throw some light on this please? I am looking at implementing such a deployment and patch management technique for the .net platform. Thanks for your time.

  Read the article

• Task predecessor/dependencies logic for task management application

  - by Serge

  Hey guys, I'm trying to figure out the logic for creating tasks that have dependencies. In short I'm building a dynamic task management system and each tasks has several options one of them is to have the task start after a predecessor. Users can add/remove/re-order (by drag&drop) tasks so I'm wondering how can I make the predecessors dynamic, here's an example of what I mean Task 1 Task 2 Task 3 - dependent of task 2 Task 4 - dependent of task 2 Tasks get renamed on delete and/or re-order. If task 1 gets deleted then 3 and 4 should become dependent of task 1 (which is the old task 2). I've been banging my head for the past few hours trying to figure out how to do that. I'm using jQuery right now and each task is contained in a div with an incremental id (ie id="task1") that gets renamed whenever a task is removed or re-ordered and I'm using a dynamically populated drop down for selecting a predecessor. What would be the easiest way to get this done?? by the way, I'm not necessarily asking for code, just trying to figure out the best way to tackle this

  Read the article

• Project management: Implementing custom errors in VS compilation process

  - by David Lively

  Like many architects, I've developed coding standards through years of experience to which I expect my developers to adhere. This is especially a problem with the crowd that believes that three or four years of experience makes you a senior-level developer.Approaching this as a training and code review issue has generated limited success. So, I was thinking that it would be great to be able to add custom compile-time errors to the build process to more strictly enforce this and other guidelines. For instance, we use stored procedures for ALL database access, which provides procedure-level security, db encapsulation (table structure is hidden from the app), and other benefits. (Note: I am not interested in starting a debate about this.) Some developers prefer inline SQL or parametrized queries, and that's fine - on their own time and own projects. I'd like a way to add a compilation check that finds, say, anything that looks like string sql = "insert into some_table (col1,col2) values (@col1, @col2);" and generates an error or, in certain circumstances, a warning, with a message like Inline SQL and parametrized queries are not permitted. Or, if they use the var keyword var x = new MyClass(); Variable definitions must be explicitly typed. Do Visual Studio and MSBuild provide a way to add this functionality? I'm thinking that I could use a regular expression to find unacceptable code and generate the correct error, but I'm not sure what, from a performance standpoint, is the best way to to integrate this into the build process. We could add a pre- or post-build step to run a custom EXE, but how can I return line- and file-specifc errors? Also, I'd like this to run after compilation of each file, rather than post-link. Is a regex the best way to perform this type of pattern matching, or should I go crazy and run the code through a C# parser, which would allow node-level validation via the parse tree? I'd appreciate suggestions and tales of prior experience.

  Read the article

• How to Store and Retrieve Images Using MsSQL (Server Management Studio)

  - by Joe Majewski

  I am having difficulties when trying to insert files into an MsSQL database. I'll try to break this down as best as I can: What data type should I be using to store image files (jpeg/png/gif/etc)? Right now my table is using the image data type, but I am curious if varbinary would be a better option. How would I go about inserting the image into the database? Does Microsoft SQL Server Management Studio have any built in functions that allow insertions of files into tables? If so, how is that done? Also, how could this be done through the use of an HTML form with PHP handling the input data and placing it into the table? How would I fetch the image from the table and display it on the page? I understand how to SELECT the cell's contents, but how would I go about translating that into a picture. Would I have to have a header(Content type: image/jpeg)? I have no problem doing any of these things with MySQL, but the MsSQL environment is still new to me, and I am working on a project for my job that requires the use of stored procedures to grab various data. Any and all help is appreciated. Thank you very much for your responses!

  Read the article

• LDAP/AD Integrated Group/Membership Management Package suitable for embedding in an application

  - by Ernest

  In several web applications, it is often necessary to define groups of users for purposes of membership as well as role management. For example, in one of our applications we would like to user a group of "Network Engineers" and another group that consists of "Managers" of such Network Engineers. The information we need is contact details of members of each group. So far, we have written our own tools to allow the administrator of the application to add/delete/move groups and their memberships and either store them in a XML file or a database. Increasingly, companies already have the groups we want defined in LDAP/AD, so it would be best to create a pointer in our application to the correspoding group in LDAP. Although there are a number of LDAP libraries and LDAP browsers available and we could code this and provide a web front end to get a list of available groups and their members, we are wondering if there is already a "component framework" available that would readily provide this LDAP browsing functionality that we could just embed this into our application. Something between a library and a full LDAP browser product ? (To clarify, the use case is for an admin of our web application to create a locally relevant group name and then map it to an exiting LDAP group. To enable this in the UI, we would like to present a way for the admin to browse available groups in the company LDAP server, view their membership, and select the LDAP group they would like to map to the locally relevant group name. In a second step, we would then synchronize the members of that LDAP group and their contact details to a store in our application ) Appreciate any pointers.

  Read the article

• Animation management in COCOS2D iphone.

  - by shreya

  Hi All, I have near about 255 image frames for background animation, 99 frames of enemy sprite and 125 frames of player sprite. All animations are running simultaneously on the screen. That is background animation is running and 4-5 enemies are on the screen are present at a time, also player is there at the same time. Take a look at the code below, CCAnimation *_enemyAnimation = [CCAnimation animationWithName:@"Enemy" delay:0.1f]; for (int i = 1; i<99; i++) { [_enemyAnimation addFrameWithFilename:[NSString stringWithFormat:@"enemy %02d.jpg",i]]; } id action1 = [CCAnimate actionWithAnimation: _enemyAnimation]; [_enemySprite runAction:[CCRepeatForever actionWithAction: action1]]; [self schedule:@selector(BackToGameLogic:) interval:5.0]; This makes my game too slower and consumes memory about 65MB in the allocations. How should I manage my animations so there will be improvement in speed and memory consumption will be reduced?. Please suggest me the way. Thanks.

  Read the article

• Patterns / Solutions to complicated Feature Management

  - by yclian

  Hi all, My company develops CDN / Web-Hosting solution. We have a middleware that's served as a business logic layer and exposes web service for the front-end. I would like to seek for a clean solution to feature management - there're uncertainties and ugly workarounds/solutions in the software that the dev would say "when it happens or is broken, we will fix it". For example, here're the following features that a web publisher can have: Sites limit Bandwidth limit SSL feature + SSL configuration per site If we downgrade a web publisher, when he's having 10 sites, down to 5 sites, we can choose not to suspend the rest of the 5 sites, or we shall prompt for suspension before the downgrade. For the case of bandwidth limit, the downgrade is easy, when the bandwidth check happens, if the publisher has it exceeded, then we will suspend his account. For the case of SSL feature. Every SSL configuration is tied to a site, what shall happen to these configuration object when the SSL feature is downgraded from enabled to disabled? So as you can see, there're many different situations and there are different ways of handling it. I can make a system that examines the impacts and prompts the user to make changes before the downgrade/upgrade. Or a system that ignores the impacts and just upgrade/downgrade. Bad. Or a system designed in a way that the client code need to be aware of the complex feature matrix (or I can expose a helper to the client code to check if a feature is not DEFUNCT) There can be many ways that I am still thinking but puzzled. I am wondering, how would you tackle this issue and is there any recommended patterns or books or software that you think I can refer to? Appreciate your help.

  Read the article

• Advice: Python Framework Server/Worker Queue management (not Website)

  - by Muppet Geoff

  I am looking for some advice/opinions of which Python Framework to use in an implementation of multiple 'Worker' PCs co-ordinated from a central Queue Manager. For completeness, the 'Worker' PCs will be running Audio Conversion routines (which I do not need advice on, and have standalone code that works). The Audio conversion takes a long time, and I need to co-ordinate an arbitrary number of the 'Workers' from a central location, handing them conversion tasks (such as where to get the source files, or where to ask for the job configuration) with them reporting back some additional info, such as the runtime of the converted audio etc. At present, I have a script that makes a webservice call to get the 'configuration' for a conversion task, based on source files located on the worker already (we manually copy the source files to the worker, and that triggers a conversion routine). I want to change this, so that we can distribute conversion tasks ("Oy you, process this: xxx") based on availability, and in an ideal world, based on pending tasks too. There is a chance that Workers can go offline mid-conversion (but this is not likely). All the workers are Windows based, the co-ordinator can be WIndows or Linux. I have (in my initial searches) come across the following - and I know that some are cross-dependent: Celery (with RabbitMQ) Twisted Django Using a framework, rather than home-brewing, seems to make more sense to me right now. I have a limited timeframe in which to develop this functional extension. An additional consideration would be using a Framework that is compatible with PyQT/PySide so that I can write a simple UI to display Queue status etc. I appreciate that the specifics above are a little vague, and I hope that someone can offer me a pointer or two. Again: I am looking for general advice on which Python framework to investigate further, for developing a Server/Worker 'Queue management' solution, for non-web activities (this is why DJango didn't seem the right fit).

  Read the article

• Applying powershell outside IT Management.

  - by Tormod

  Hi. We have a flexible process control system by which automation engineers configure up large application comprising thousands of small logical units that are parameterized and integrated into the control flow. There are many tasks that are repetitive on the granular level, and there are a multitude of proprietary productivity tools that have been made to meet this demand. We have different business segments, and the automation engineers vary across the board in skill sets and interests. Fancy GUI and usability versus flexibility is a common discussion. At first glance, powershell seems to be a sensible platform to implement such tooling and which also would be a advantageous cross-over skill to manage the IT aspects of the system setup and deployment as a whole. This should allow the script savvy their desired flexibility (they are already a scripting crowd) and the GUI dependant could still get their desired GUI underpinned by powershell. But I can't seem to find many people/groups who have tried to use the scriptability and object passing of powershell extensively to accommodate a heterogeneous user community outside the realm of IT management. Do anybody have any tips or word of caution? Am I missing something obvious as to why this shouldn't be done? Shouldn't powershell be taking over the world? ;-)

  Read the article

• How to Store and Retrieve Images Using SQL Server (Server Management Studio)

  - by Joe Majewski

  I am having difficulties when trying to insert files into a SQL Server database. I'll try to break this down as best as I can: What data type should I be using to store image files (jpeg/png/gif/etc)? Right now my table is using the image data type, but I am curious if varbinary would be a better option. How would I go about inserting the image into the database? Does Microsoft SQL Server Management Studio have any built in functions that allow insertions of files into tables? If so, how is that done? Also, how could this be done through the use of an HTML form with PHP handling the input data and placing it into the table? How would I fetch the image from the table and display it on the page? I understand how to SELECT the cell's contents, but how would I go about translating that into a picture. Would I have to have a header(Content type: image/jpeg)? I have no problem doing any of these things with MySQL, but the SQL Server environment is still new to me, and I am working on a project for my job that requires the use of stored procedures to grab various data. Any and all help is appreciated.

  Read the article

• Management API - The request body XML was invalid or not correctly specified

  - by maartenba

  Cross posting from http://social.msdn.microsoft.com/Forums/en-US/windowsazuretroubleshooting/thread/31b6aedc-c069-4e32-8e8f-2ff4b7c30793 I'm getting this error on changing configuration through the service management API: The request body XML was invalid or not correctly specified The request body payload: <?xml version="1.0" encoding="utf-8"?> <ChangeConfiguration xmlns="http://schemas.microsoft.com/windowsazu re"> <Configuration>PD94bWwgdmVyc2lvbj0iMS4wIj8+CjxTZXJ2aWNlQ29uZmlndX JhdGlvbiB4bWxuczp4c2k9Imh0dHA6Ly93d3cudzMub3JnLzIwMDEvWE1MU2NoZW1hLWluc3RhbmNlIi B4bWxuczp4c2Q9Imh0dHA6Ly93d3cudzMub3JnLzIwMDEvWE1MU2NoZW1hIiB4bWxucz0iaHR0cDovL3 NjaGVtYXMubWljcm9zb2Z0LmNvbS9TZXJ2aWNlSG9zdGluZy8yMDA4LzEwL1NlcnZpY2VDb25maWd1cm F0aW9uIiBzZXJ2aWNlTmFtZT0iIiBvc0ZhbWlseT0iMSIgb3NWZXJzaW9uPSIqIj4KICA8Um9sZSBuYW 1lPSJXZWJSb2xlMSI+CiAgICA8Q29uZmlndXJhdGlvblNldHRpbmdzPgogICAgICA8U2V0dGluZyBuYW 1lPSJNaWNyb3NvZnQuV2luZG93c0F6dXJlLlBsdWdpbnMuRGlhZ25vc3RpY3MuQ29ubmVjdGlvblN0cm luZyIgdmFsdWU9IlVzZURldmVsb3BtZW50U3RvcmFnZT10cnVlIi8+CiAgICA8L0NvbmZpZ3VyYXRpb2 5TZXR0aW5ncz4KICAgIDxJbnN0YW5jZXMgY291bnQ9IjIiLz4KICAgIDxDZXJ0aWZpY2F0ZXMvPgogID wvUm9sZT4KPC9TZXJ2aWNlQ29uZmlndXJhdGlvbj4K</Configuration> </ChangeConfiguration> I'm passing it the following configuration: $configuration = '<?xml version="1.0" encoding="utf-8"?> <ServiceConfiguration xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceConfiguration" serviceName="" osFamily="1" osVersion="*"> <Role name="WebRole1"> <ConfigurationSettings> <Setting name="Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString" value="UseDevelopmentStorage=true"/> </ConfigurationSettings> <Instances count="2"/> <Certificates/> </Role> </ServiceConfiguration>'; Does anyone know why this error occurs? I suspect it has something to do with encoding but not sure.

  Read the article

• Install usblib package - Ubuntu

  - by Tom celic

  I need the package libusb for another package I am installing. I tried the following which seemed to install the package, sudo apt-get install libusb-dev but when I try to install the other package I get, configure: error: Package requirements (libusb-1.0 >= 0.9.1) were not met: No package 'libusb-1.0' found Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables LIBUSB_CFLAGS and LIBUSB_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. When I run the command dpkg -L libusb-dev, I get: /. /usr /usr/bin /usr/bin/libusb-config /usr/include /usr/include/usb.h /usr/lib /usr/lib/libusb.a /usr/lib/libusb.la /usr/lib/pkgconfig /usr/lib/pkgconfig/libusb.pc /usr/share /usr/share/doc /usr/share/doc/libusb-dev /usr/share/doc/libusb-dev/html /usr/share/doc/libusb-dev/html/index.html /usr/share/doc/libusb-dev/html/preface.html /usr/share/doc/libusb-dev/html/intro.html /usr/share/doc/libusb-dev/html/intro-overview.html /usr/share/doc/libusb-dev/html/intro-support.html /usr/share/doc/libusb-dev/html/api.html /usr/share/doc/libusb-dev/html/api-device-interfaces.html /usr/share/doc/libusb-dev/html/api-timeouts.html /usr/share/doc/libusb-dev/html/api-types.html /usr/share/doc/libusb-dev/html/api-synchronous.html /usr/share/doc/libusb-dev/html/api-return-values.html /usr/share/doc/libusb-dev/html/functions.html /usr/share/doc/libusb-dev/html/ref.core.html /usr/share/doc/libusb-dev/html/function.usbinit.html /usr/share/doc/libusb-dev/html/function.usbfindbusses.html /usr/share/doc/libusb-dev/html/function.usbfinddevices.html /usr/share/doc/libusb-dev/html/function.usbgetbusses.html /usr/share/doc/libusb-dev/html/ref.deviceops.html /usr/share/doc/libusb-dev/html/function.usbopen.html /usr/share/doc/libusb-dev/html/function.usbclose.html /usr/share/doc/libusb-dev/html/function.usbsetconfiguration.html /usr/share/doc/libusb-dev/html/function.usbsetaltinterface.html /usr/share/doc/libusb-dev/html/function.usbresetep.html /usr/share/doc/libusb-dev/html/function.usbclearhalt.html /usr/share/doc/libusb-dev/html/function.usbreset.html /usr/share/doc/libusb-dev/html/function.usbclaiminterface.html /usr/share/doc/libusb-dev/html/function.usbreleaseinterface.html /usr/share/doc/libusb-dev/html/ref.control.html /usr/share/doc/libusb-dev/html/function.usbcontrolmsg.html /usr/share/doc/libusb-dev/html/function.usbgetstring.html /usr/share/doc/libusb-dev/html/function.usbgetstringsimple.html /usr/share/doc/libusb-dev/html/function.usbgetdescriptor.html /usr/share/doc/libusb-dev/html/function.usbgetdescriptorbyendpoint.html /usr/share/doc/libusb-dev/html/ref.bulk.html /usr/share/doc/libusb-dev/html/function.usbbulkwrite.html /usr/share/doc/libusb-dev/html/function.usbbulkread.html /usr/share/doc/libusb-dev/html/ref.interrupt.html /usr/share/doc/libusb-dev/html/function.usbinterruptwrite.html /usr/share/doc/libusb-dev/html/function.usbinterruptread.html /usr/share/doc/libusb-dev/html/ref.nonportable.html /usr/share/doc/libusb-dev/html/function.usbgetdrivernp.html /usr/share/doc/libusb-dev/html/function.usbdetachkerneldrivernp.html /usr/share/doc/libusb-dev/html/examples.html /usr/share/doc/libusb-dev/html/examples-code.html /usr/share/doc/libusb-dev/html/examples-tests.html /usr/share/doc/libusb-dev/html/examples-other.html /usr/share/doc/libusb-dev/copyright /usr/share/doc-base /usr/share/doc-base/libusb-dev /usr/share/man /usr/share/man/man1 /usr/share/man/man1/libusb-config.1.gz /usr/lib/libusb.so /usr/share/doc/libusb-dev/changelog.Debian.gz Any ideas??

  Read the article

• Transportable Database 11gR2 Certified with E-Business Suite

  - by Steven Chan

  Platform migration is the process of moving a database from one operating system platform to a different operating system platform. You might wish to migrate your E-Business Suite database to create testing instances, experiment with new architectures, perform benchmarks, or prepare for actual platform changes in your production environment. Database migration across platforms of the same "endian" format (byte ordering) using the Transportable Database (TDB) process is now certified with Oracle Database 11gR2 (11.2.0.1) for:Oracle E-Business Suite Releases 11i (11.5.10.2) Oracle E-Business Suite Release 12.0.4 or higherOracle E-Business Suite Release 12.1.1 or higherThis EBS database migration process was previously certified only for 10gR2 and 11gR1.

  Read the article

• New EBS 12.0 AutoConfig Rollup 7 Now Available

  - by Steven Chan

  AutoConfig manages the configuration of E-Business Suite environments.  The seventh and latest rollup patch for the AutoConfig engine and tools for Oracle E-Business Suite Release 12.0 is now available for download.  The official (and admittedly-cryptic) name for this EBS 12.0 patch is: R12.TXK.A.DELTA.7 (Patch 9386653)

  Read the article

• Using Microsoft Office 2007 with E-Business Suite Release 12

  - by Steven Chan

  Many products in the Oracle E-Business Suite offer optional integrations with Microsoft Office and Microsoft Projects.  For example, some EBS products can export tabular reports to Microsoft Excel.  Some EBS products integrate directly with Microsoft products, and others work through the Applications Desktop Integrator (WebADI and ADI) as an intermediary.These EBS integrations have historically been documented in their respective product-specific documentation.  In other words, if an EBS product in the Oracle Financials family supported an integration with, say, Microsoft Excel, it was up to the product team to document that in the Oracle Financials documentation.Some EBS systems administrators have found the process of hunting through the various product-specific documents for Office-related information to be a bit difficult.  In response to your Service Requests and emails, we've released a new document that consolidates and summarises all patching and configuration requirements for EBS products with MS Office integration points in a single place:Using Microsoft Office 2007 with Oracle E-Business Suite 11i and R12 (Note 1072807.1)

  Read the article

< Previous Page | 135 136 137 138 139 140 141 142 143 144 145 146  | Next Page >