Search Results

Search found 4786 results on 192 pages for 'traffic shaping'.

Page 139/192 | < Previous Page | 135 136 137 138 139 140 141 142 143 144 145 146  | Next Page >

• Can I use Server Monitor with a non-server Mac?

  - by Chris

  I have a computer I use as a simple file and web server. I am simply desiring to be able to monitor load, traffic, memory usage, etc via Server Monitor. I have also downloaded an app for my iPhone which does the same thing, but it uses the same protocol that Server Monitor does. Is it possible to get Server Monitor to recognize my non-server box as a server so I can monitor this information? For reference, I am running 10.4.ll on this PPC box. Thanks in advance!

  Read the article

• Does connecting to the default host via public IP from within its subnet cause any issues?

  - by username

  I'm setting up a small office network with a single public IP (let's say it's 69.16.230.117). I've configured NAT on the router with incoming traffic forwarded to the server (say the server has a private IP of 192.168.0.2). Is it okay to configure the client machines on the same subnet to access the server via the router's public IP (69.16.230.117)? In practice it's never caused me problems, but I've heard, here and there, that it is a bad idea, and one should use the private IP (192.168.0.2). Does connecting to the default host via public IP from within its subnet cause any issues? Please refrain from writing "never! it breaks the intranet!" ;-)

  Read the article

• Learn as much as possible about the setup behind a website.

  - by carrier

  Let's say I'm in the process of planning the setup of a website. I study similar sites that offer similar services or might receive similar traffic model. Is there a way to determine a bit the kind of setup, software and/or hardware. Some things are obvious. If I see .php or .jsp then I already know a bit. But any ideas on how to decipher more? Maybe where the site is hosted, hardware, platforms...

  Read the article

• How do I stop my IIS App Pool making a request to wpad.mydomain.com?

  - by Programming Hero

  As part of some performance troubleshooting, I've monitored the slow startup of a "cold" App Pool (one without an active worker process) in IIS. When using a built-in account, the App Pool starts in sub-second time. When using a custom local account the App Pool takes 30+ seconds to start processing requests. The service appears to be making requests to wpad.mydomain.com, an address it does not have access to, which causes it to wait 30 seconds for a response before eventually timing out. As a workaround, I've added the hostname to the server's hosts file, to direct the traffic to the local machine, which returns much faster (1-2 seconds). What do I need to do to stop IIS making this request when this identity is used for the App Pool?

  Read the article

• Excluding four IP's from a /32 static route

  - by Justin

  I have a Cisco ASA routing a /32 of public addresses (non RFC-1812) through a private link. When the device sees the destination address it selects the private route instead of going out over the public network. This works great but I am now trying to exclude 4 IP's from the private route. Traffic to these addresses should go over the public internet instead of being routed over the private network. Can I just add anothe route for these four IP's or do I have to modify the existing route for the /32?

  Read the article

• Why would one server be sending DUP ACK packets to one PC, which is responding with HTTP RST packets?

  - by IronicMuffin

  I'm not a network profressional, so please excuse any wrong language. I was debugging why my DNS traffic was a constant 160Kbps on our corporate network. I opened up a wireshark trace, and I see one PC of a coworker broadcasting HTTP [RST] packets to one of our DMZ servers at the rate of 1000 a second. He restarted his machine, and as soon as it went offline, the server started broadcasting [DUP] [ACK] packets, until he came back online. It then resumed the HTTP [RST] packets. Apparently this server has been doing this kind of behavior since it went live. I believe it did this with a printer and an access point as well. Can anyone explain why this behavior is occurring? Any solutions? The initial research was done because there have been "bandwidth issues" and I wonder if this is contributing.

  Read the article

• Windows share through proxy

  - by jessebs

  I have a Windows share and on a different subnet. The users on the user subnet can not see the server subnet, although there is a proxy server in place on the user subnet that can. All web traffic is sent through this proxy server (squid). Is there any way to proxy a file share so the users can access it? I have tried an NTFS symlink, but I can't access the symlink through the share. The server is Windows Server 2008 R2 -- I had to stick with Windows because it is running a Remote Desktop Gateway as well.

  Read the article

• Apache on Windows in production environment? Why not?

  - by tillda

  "Everyone" know that Apache is for Linux/Unix and on Windows IIS is the way to go. However, I'm not a pro at Linux and it would be an enormous relief for me to use just the same setup in the production environment that I use during development. I'm a solo developer and I'm trying to make things as simple as possible. I've already got rid of other issues like storage (-cloud) emails (-postmark). So, what are the real drawbacks that can happen when I just put Apache in Windows virtual private server from Rackspace and use it as the main production environment for a PHP project? Money for more VPS resources is not that big issue compared to the possibility of not having to learn a different OS. Super-heavy traffic is not expected. Also my PHP project can be quite optimized. There are some heavy scripts, but only for the inside (logged) users. All else can be served more or less statically.

  Read the article

• Sending email with Windows 8 Mail (Modern UI) being blocked by AVG Firewall

  - by Riaan

  I've setup my Outlook.com email address in Windows 8 Mail (Modern UI) but is unable to send and receive emails when my AVG Internet Security 2012 Business Edition's Firewall is enable. When I disable the firewall, the emails are coming through and are being send. I know that I can most probably open the ports for IMAP on the firewall, but instead I would like to permit the application. Where/how do I find the application path for Windows 8 Mail (Modern UI) to allow all network traffic? (AVG did not show its normal Allow/Disallow notification for 1st time communications) Any advice would be appreciated.

  Read the article

• Question about server usage, big community platform [closed]

  - by Json

  Possible Duplicate: How do you do Load Testing and Capacity Planning for Web Sites I’m working on a community platform writen in PHP, MySQL. I have some questions about the server usage maybe someone can help me out. The community is based on JQuery with many ajax requests to update content. It makes 5 - 10 AJAX(Json, GET, POST) requests every 5 seconds, the requests fetch user data like user notifications and messages by doing mySQL queries. I wonder how a server will handle this when there are for more than 5000 users online. Then it will be 50.000 requests every 5 seconds, what kind of server you need to handle this? Or maybe even more, when there are 15.000 users online, 150.000 requests every 5 seconds. My webserver have the following specs. Xeon Quad 2048MB 5000GB traffic Will it be good enough, and for how many users? Anyone can help me out or know where to find such information, like make a calculation?

  Read the article

• Reverse proxy - how should it be done?

  - by Thomas M.

  I have a currently running server with Apache that is working great! However, I want to buy a VPS and use that as a proxy between the user and the "old" server. So the new server's only job is actually to just forward the traffic from the VPS to the old Apache server. How can I achieve this the best way? I've read something about nginx proxy, but don't know if that's what I should use? The IDEAL way (for me) would be to now even touch the running server. I just want to setup the VPS as proxy, forward the DNS to the proxy instead, and let the proxy take over the connection to the primary server. Is that possible? I would really like to hear your opinions about this, and how you would do this (would be happy if you could link me to some tutorial)! :) The VPS is running CentOS and the running/primary is running Debian. Thanks in advance.

  Read the article

• Make a server ( other than the router ) to be the default gateway for a subnet

  - by powerguy123

  I am trying to make a server ( lets call it server_A) which is different from the router to be the gateway for a subnet. Why do I want this ? I want to host a loadbalancer on server_A using LVS-NAT, and I dont want to implement a V-Lan or IP-IP tunneling. I have modified the routing tables of the remaining servers on the subnet to use server_A as the gateway. I have set server_A to not send ICMP reroute packets. But most traffic from servers in that subnet to outside clients are still being sent through the original gateway, bypassing server_A. Is there any other configuration I need to set in order to achieve my goal ?

  Read the article

• Separate 2 networks with 1 Windows Server

  - by SamuGG

  The situation is: I have 1 router 192.168.1.1, 1 switch, 1 windows server and a basic LAN of devices accessing it. I need to split into 2 separate LANs with full Internet access each, but isolated from each other. Given that, the server is a Windows Server 2008 R2 with 2 NICs: NIC1: 192.168.1.2 NIC2: 192.168.2.2 The router has no dhcp configuration. Please, can anyone explain gracefully, step by step, what do I need to do? What would be the 2 NICs full configuration? What services do I need to install? I don't want devices on either network to see devices on the other network, they must be completely separate. I guess I'm missing the routing procedure step, but I have no idea how is that done. For example: tell the server that devices with gateway 192.168.2.2 must send traffic for internet to 192.168.1.1 router. Thanks in advance.

  Read the article

• Network flooded with seemingly empty packets

  - by Adam Particka

  Let me preface this with the fact that I'm just a web developer at my company with little networking knowledge. Earlier today there was a department that lost all of their network connections so I popped open Wireshark and observed the influx of packets to my machine. There was normal traffic (ARP requests, etc.) coming in at ~50 packets every second. Then all of a sudden the log was flooded with packets arriving ~5000 a second. It looks as though they all contain the same data, just a looped sequence. We have someone here looking at it but I thought I would ask if anyone had seen anything like this before. Here's a selection from one of the captures in Wireshark. http://www.cloudshark.org/captures/06f950725c74

  Read the article

• Centos 6.2, Apache 2 and Listen port for socket connection

  - by salvosav

  I'm trying to make a socket connection between a client and my server through a php script. To do this, I opened a port on iptables, and configure a virtual host with apache to redirect all traffic from my door to the folder that contains the file index.php, which is my script. Doing some tests the door is open, but using command netstat -ltn , I see ':::35100'. Looking on the net I understand if in this way is only listen inward and not outward. But I don't understand how can I turn this ':::35100 '-' in this '0.0.0.0:35100 '. Or, better yet, how to add this rule. Any ideas? thanks

  Read the article

• Website is live but ping times out

  - by infinity

  I have a client's website that is running on GoDaddy hosting and started behaving very strange recently. The site is up and running but when I try to ping it I get time out. The problem is PayPal doesn't work also Google Webmaster reported the site is down. The client spoke with support and they said there is no firewall or any other traffic filter on their side. The site itself is PHP. Any ideas are welcome. I've tried to send test IPN from PayPal to the payment URL and got: IPN delivery failed. Unable to connect to the specified URL. Please verify the URL and try again. Which makes me think that the website/server is inaccessible in some specific cases. The site URL is http://www.flavourly.com P.S.: I tried to ping it from different machines, ISPs and OS

  Read the article

• How do I transform a LAN subnet to another? (VPN)

  - by Krishath

  I've set up a VPN with a LAN behind it. VPN : 10.2.1.X LAN : 192.168.1.X When I connect from outside where the router via DHCP assigns me a similar IP to my "original LAN" (192.168.1.X) everything starts to be messed up. I can't route my traffic through the VPN and (obviosly) I can't reach my "real" LAN behind my VPN. How can I always reach my LAN? I thought that I can fake my LAN subnet to something like "10.2.2.X" to those PCs out of my VPN but in this way my VPN server should translate 10.2.2.X to 192.168.1.X (locally).[Is this S/D-NAT?] Is this possible? How can I accomplish that? Thank you very much!

  Read the article

• Allow access only to one website

  - by Alex

  Hey. I'd like to allow access on a computer connected directly to the internet to one website ONLY. The solution of IE's "Content advisor" or firefox's "FoxFilter" isn't good enough because it actually downloads the data and just don't display it. I want to block the traffic before the requests are sent. How is it possible? Thanks. Edit: OS is windows xp. The browser can be firefox, iexplorer, chrome... It doesn't matter. The computer is connected directly to the modem.

  Read the article

• Issue with domain redirection

  - by phphunger

  I have a flash games website which is hosted at godaddy server. But because of heavy traffic on my site the godaddy server gets down. So I changed the hosting to Midphase server. The strange thing is i have created new name servers and new database in my mid phase server but still the web site is coming from the godaddy server. When i do any modifications from the godaddy ftp i am getting the modifications but when i do any modifications in the mid phase server. No changes are happening. One strange thing is the who.is is showing the new name servers and new server details but not getting the new servers contents. Can anyone help me in this regard?

  Read the article

• redirect wildcard subdomains to https (nginx)

  - by whatWhat

  I've got a wildcard ssl certification and I'm trying to redirect all non-ssl traffic to ssl. Currently I'm using the following for redirection the non-subdomainded url which is working fine. server { listen 80; server_name mydomain.com; #Rewrite all nonssl requests to ssl. rewrite ^ https://$server_name$request_uri? permanent; } when I do the same thing for *.mydomain.com it logically redirects to https://%2A.mydomain.com/ How do you redirect all subdomains to their https equivalent?

  Read the article

• JBoss basic access

  - by user101024

  I have JBoss 5 deployed on Solaris 10 - the servers connection has unrestricted high ports (1023) open to the internet. I can access the box via ssh & FTP from a second server on the same subnet and anywhere over the internet. JBoss is running over port 8080 and is accessible via http://locahost:8080 on the box itself. I cannot access it via http://ip.add.goes.here:8080 from either the other server on the same subnet or via the internet. Is there any service or configuration within JBoss or elsewhere on Solaris 10 that needs to be changed from default to allow http traffic to be served? Thanks, Kevin

  Read the article

• Need reasonably priced router with QoS support [closed]

  - by ULTRA_POROV

  I dont need wireless. I am expecting very heavy traffic, with possibly thousands of tcp connections open at one time. This would require that the router has good hardware. I also need to limit the different services i will provide. Lets say i need to guarantee 60% of all the bandwidth to HTTP, 10% FTP, and 10% for Mail... So the router software must have flexible QoS options as well. I don't know which one to chooose, because this information is usually not given on the router specs.

  Read the article

• Need to scale quickly. Which cloud service should I use?

  - by mk1000

  Traffic to my facebook app is growing at an insane rate and I need some suggestions on how to scale. I'm probably not going to even be able to keep it running by the day's end, as it's hosted from my already overloaded dedicated server. I need to either move it to its own box or a cloud service like e2c. Something like e2c seems like the way to go, but my server admin skills are terrible. Is there a good front end management UI for e2c or another hosting service that is comparable in cost that is fully managed? I don't mind going with something a bit more expensive now if that means I can get everything switched over and running within 24 hours.

  Read the article

• How to enable Integrated Load Balancing in Windows 8

  - by intodevelopment

  One of the cool new features many sites mention is "Integrated Load Balancing" in Windows 8. It is supposed to do the following: If you have multiple active network connections, Windows 8 will intelligently balance the network traffic between them for performance Source: Short: Some of what Microsoft didn’t show of Windows 8 I would love to see this feature in action. I am connected to a WiFi access point and to a different network by cable. Yet I don't see the operating system 'intelligently' balance the network load when for instance downloading multiple files. Is there any way to enable it or should I adjust my expectations?

  Read the article

• A really unique case of Load Balancing

  - by Shamshun

  I have an internet connection which has limited up/down bandwidth per IP address. What I want to do is to get multiple IP addresses on a "single" LAN interface, and use a load balancer to distribute traffic through them. I was successful at getting 100 ip addresses on a single interface. my problem is that Linux and Windows use the first ip address of an interface by default, so my bandwidth is not increased. I would appreciate if someone tells me what Load Balancing software has the ability to distribute load between multiple IPs on a single interface. I have tried to do so on both Win7 and Backtrack-LinuxR2

  Read the article

< Previous Page | 135 136 137 138 139 140 141 142 143 144 145 146  | Next Page >