Search Results

Search found 33250 results on 1330 pages for 'access rights'.

Page 14/1330 | < Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >

• access VPN machine macosx same subnet

  - by matheszabi

  I would like to access the office machine, which has a fixed IP, and is available only in its local LAN. Let say 192.168.1.100. I have a VPN with username/password connection and I am trying to access the office machine from another location, i.e., another LAN, which has the same subnet: 192.168.1.50. I am using MacOSX 10.8. I have checked the "send all trafic over VPN connection, but I think it looks like it doesn't care and is searching in Local. I do not have admin privileges and can't request to make changes to the network settings in both LANs. Is there any way to connect to the desired remote machine?

  Read the article

• Cannot write to registry while installing Microsoft Access 2010 - Error 1406

  - by Rillanon

  While installing I get an error: Microsoft Access 2010 encountered an error during setup. Error 1406. Setup cannot write the value to the registry key \Software\Classes\Interface{000C036F-0000-0000-C000-000000000046}\ProxyStubClsid. Verify that have sufficient permissions to access the registry or contact Microsoft Product Support Services (PSS) for assitance. I went to regedit to check on the key that the error was talking about but when I clicked on it it says file not found. I'm using 64bit Windows 7 Ultimate. Any ideas?

  Read the article

• Access denied on file system for System Administrator

  - by NLV

  Hello Yesterday I got win32.Saltiy virus and did some damage before my Kaspersky suite caught it. Now I've cleaned all the viruses using Kaspersky but I believe the changes it did to the registry/policies are still there. I'm not able to have write access on the entire file system. It is showing up the access denied the error. I'm in the local system administrators group. I've tried removing and re-adding it (with a reboot). But still no luck. Any ideas on how can I fix this?

  Read the article

• Not able to access other machines on network

  - by TheVillageIdiot

  Hi I'm running Windows 7 Enterprise (32bit) on my laptop. For some time I'm not able to access other machines using \\192.168.xxx.xxx. I've installed VM Ware player on my machine few days back but I don't remember if it happened just after that or there is some other reason behind it. EDIT:- I've disabled VMWare Bridge Protocol but still no effect. Please help me. PS:- I've used both wireless and wired networks. Network sharing is enabled and I can ping other machines but cannot access network shares. I get following message: \\xxx.xxx.xxx.xxx You might not have permission to use this network resource. Contact the administrator of this server to find out if you have acess permissions. The request is not supported. EDIT (2):- Network Discovery, File and Printer Sharing, Folder sharing are all on.

  Read the article

• ms access template where to find the vb code

  - by tintincutes

  I'm very new to this ms access 2007. I have a copy of a charitable contribution template charitablecontributions.accdb. I would like to know where I can find the code of it? I opened it by holding down the shift button and double click on it and it will open to a normal ms access where you can modify the table and so. But when I just click the file: charitablecontributions.accdb it will open to a formular view where the ribbon bars are gone. I wanted to know how, how is it possible to have this formular view? Because I have a Test.mdb from 2003 and I also would like it to be open like the formular view of charitablecontributions.accdb. I'll appreciate your help. Thanks

  Read the article

• MS Access Query Criteria Issue

  - by xxl3ww

  Currently I have a MS Access database query that has a field named FedEXDetTotal that totals 9 FedEX charge fields. I have another field that is from our inhouse system called "Total Charge". This is just a normal number field. I have created another Field in this query Diff: [FedEXDetTotal]-[Total Charge] This tells me the difference between the Fedex charge and what we actually charged. Everything works OK with this, but when I try to put the criteria 5 for the Diff field, when I run the query, I get a prompt saying "Enter Parameter Value FedEXDetTotal". Why is Access doing this? How do I get around this? I'm trying to start out with something simple(5), but what I really want is [Forms]![Dis].[txtbox_Diff].

  Read the article

• ms access template where to find the vb code

  - by tintincute

  Hi I'm very new to this ms access 2007. I have a copy of a charitable contribution template charitablecontributions.accdb. I would like to know where I can find the code of it? I opened it by holding down the shift button and double click on it and it will open to a normal ms access where you can modify the table and so. But when I just click the file: charitablecontributions.accdb it will open to a formular view where the ribbon bars are gone. I wanted to know how, how is it possible to have this formular view? Because I have a Test.mdb from 2003 and I also would like it to be open like the formular view of charitablecontributions.accdb. I'll appreciate your help. Thanks

  Read the article

• Write permissions denied on linked tables between MS Access 2003 and 2007

  - by STEVE KING

  We are in the process of switching over to Access 2007. We have numerous data tables in Access 2003 files. In one case, the user has 2007 on his PC and opened the front end in 2007. No problems. When the the user is done, he clicks a button that executes a macro full of update queries. The macro reaches the first query and halts. We get a message saying we do not have permissions to write to this linked table (2003 format). There were no security files involved. We re-linked from 2007, same problem. LAN permssions were ok. I wound up having to import the tables to front end in order for the user to be able to do his job.

  Read the article

• Need help with remote dekstop - Limit the computers you can access server from

  - by stirredo

  I have a windows server 2003 computer that is accessed by remote desktop connection. To access the server all you need to know is the IP address of the computer. I want to limit the computers that can access the windows server computer to authorized computers only. The authorized computers won't have static IPs, so I cannot limit them on basis of IP address. Can I limit them on basis of MAC id perhaps? I won't mind using third party solution like Teamviewer or Logmein etc. So How can I solve this problem?

  Read the article

• Copy data from Access to the next row in Excel

  - by edmon

  I have a MS Access database for a small Hotel. On the main form I have Guest Information fields...(Name, Address, Phone#, etc). I also have an Excel file that keeps track of bookings for the Hotel. The following code takes the Guest information from my form in Access and populates the labeled cells in my Excel file. Dim objXLApp As Object Dim objXLBook As Object Set objXLApp = CreateObject("Excel.Application") Set objXLBook = objXLApp.Workbooks.Open("Y:\123files\E\Hotel Reservation.xls") objXLApp.Application.Visible = True objXLBook.ActiveSheet.Range("B2") = Me.GuestFirstName & " " & GuestLastName objXLBook.ActiveSheet.Range("C2") = Me.PhoneNumber objXLBook.ActiveSheet.Range("D2") = Me.cboCheckInDate objXLBook.ActiveSheet.Range("E2") = Me.cboCheckOutDate objXLBook.ActiveSheet.Range("G2") = Me.RoomType objXLBook.ActiveSheet.Range("H2") = Me.RoomNumber End Sub Is there a way to, move to the next row in my Excel file, for a new guests info? EX. I take my first guests info and it populates row 2 of my Excel file. For my next guest it will populate row 3 of my Excel file and so on....

  Read the article

• How can set up a file sharing server to allow remote access over a WAN?

  - by pst007x

  I want to set up a server to allow remote access over a WAN. The purpose is to allow people to remote connect and download specific files from a specified folder hosted on the server. Is there software available to achieve this, preferably with an interface so I can easily add and remove users, plus monitor who is connected at any time? I have looked around and only found terminal references, and not very clear how to set up. I have a service running on my Win server, but I am hoping to move from that to Ubuntu for my file sharing. I do not want people who access the server to have any local accounts or any access to any folder/files apart from authorised folders/files. Thanks

  Read the article

• ADO.NET Entity Framework with OLE DB Access Data Source

  - by Tim Long

  Has anyone found a way to make the ADO.NET Entity Framework work with OLE DB or ODBC data sources? Specifically, I need to work with an Access database that for various reasons can't be upsized to SQL. This MSDN page says: The .NET Framework includes ADO.NET providers for direct access to Microsoft SQL Server (including Entity Framework support), and for indirect access to other databases with ODBC and OLE DB drivers (see .NET Framework Data Providers). For direct access to other databases, many third-party providers are available as shown below. The reference to "indirect access to other databases" is tantalising but I confess that I am hopelessly confused by all the different names for data access technology.

  Read the article

• Cisco 800 series won't forward port

  - by sam

  Hello ServerFault, I am trying to forward port 444 from my cisco router to my Web Server (192.168.0.2). As far as I can tell, my port forwarding is configured correctly, yet no traffic will pass through on port 444. Here is my config: ! version 12.3 service config no service pad service tcp-keepalives-in service tcp-keepalives-out service timestamps debug uptime service timestamps log uptime service password-encryption no service dhcp ! hostname QUESTMOUNT ! logging buffered 16386 informational logging rate-limit 100 except warnings no logging console no logging monitor enable secret 5 -removed- ! username administrator secret 5 -removed- username manager secret 5 -removed- clock timezone NZST 12 clock summer-time NZDT recurring 1 Sun Oct 2:00 3 Sun Mar 3:00 aaa new-model ! ! aaa authentication login default local aaa authentication login userlist local aaa authentication ppp default local aaa authorization network grouplist local aaa session-id common ip subnet-zero no ip source-route no ip domain lookup ip domain name quest.local ! ! no ip bootp server ip inspect name firewall tcp ip inspect name firewall udp ip inspect name firewall cuseeme ip inspect name firewall h323 ip inspect name firewall rcmd ip inspect name firewall realaudio ip inspect name firewall streamworks ip inspect name firewall vdolive ip inspect name firewall sqlnet ip inspect name firewall tftp ip inspect name firewall ftp ip inspect name firewall icmp ip inspect name firewall sip ip inspect name firewall fragment maximum 256 timeout 1 ip inspect name firewall netshow ip inspect name firewall rtsp ip inspect name firewall skinny ip inspect name firewall http ip audit notify log ip audit po max-events 100 ip audit name intrusion info list 3 action alarm ip audit name intrusion attack list 3 action alarm drop reset no ftp-server write-enable ! ! ! ! crypto isakmp policy 1 authentication pre-share ! crypto isakmp policy 2 encr 3des authentication pre-share group 2 ! crypto isakmp client configuration group staff key 0 qS;,sc:q<skro1^, domain quest.local pool vpnclients acl 106 ! ! crypto ipsec transform-set tr-null-sha esp-null esp-sha-hmac crypto ipsec transform-set tr-des-md5 esp-des esp-md5-hmac crypto ipsec transform-set tr-des-sha esp-des esp-sha-hmac crypto ipsec transform-set tr-3des-sha esp-3des esp-sha-hmac ! crypto dynamic-map vpnusers 1 description Client to Site VPN Users set transform-set tr-des-md5 ! ! crypto map cm-cryptomap client authentication list userlist crypto map cm-cryptomap isakmp authorization list grouplist crypto map cm-cryptomap client configuration address respond crypto map cm-cryptomap 65000 ipsec-isakmp dynamic vpnusers ! ! ! ! interface Ethernet0 ip address 192.168.0.254 255.255.255.0 ip access-group 102 in ip nat inside hold-queue 100 out ! interface ATM0 no ip address no atm ilmi-keepalive dsl operating-mode auto ! interface ATM0.1 point-to-point pvc 0/100 encapsulation aal5mux ppp dialer dialer pool-member 1 ! ! interface Dialer0 bandwidth 640 ip address negotiated ip access-group 101 in no ip redirects no ip unreachables ip nat outside ip inspect firewall out ip audit intrusion in encapsulation ppp no ip route-cache no ip mroute-cache dialer pool 1 dialer-group 1 no cdp enable ppp pap sent-username -removed- password 7 -removed- ppp ipcp dns request crypto map cm-cryptomap ! ip local pool vpnclients 192.168.99.1 192.168.99.254 ip nat inside source list 105 interface Dialer0 overload ip nat inside source static tcp 192.168.0.2 444 interface Dialer0 444 ip nat inside source static tcp 192.168.0.51 9000 interface Dialer0 9000 ip nat inside source static udp 192.168.0.2 1433 interface Dialer0 1433 ip nat inside source static tcp 192.168.0.2 1433 interface Dialer0 1433 ip nat inside source static tcp 192.168.0.2 25 interface Dialer0 25 ip classless ip route 0.0.0.0 0.0.0.0 Dialer0 ip http server no ip http secure-server ! ip access-list logging interval 10 logging 192.168.0.2 access-list 1 remark The local LAN. access-list 1 permit 192.168.0.0 0.0.0.255 access-list 2 permit 192.168.0.0 access-list 2 remark Where management can be done from. access-list 2 permit 192.168.0.0 0.0.0.255 access-list 3 remark Traffic not to check for intrustion detection. access-list 3 deny 192.168.99.0 0.0.0.255 access-list 3 permit any access-list 101 remark Traffic allowed to enter the router from the Internet access-list 101 permit ip 192.168.99.0 0.0.0.255 192.168.0.0 0.0.0.255 access-list 101 deny ip 0.0.0.0 0.255.255.255 any access-list 101 deny ip 10.0.0.0 0.255.255.255 any access-list 101 deny ip 127.0.0.0 0.255.255.255 any access-list 101 deny ip 169.254.0.0 0.0.255.255 any access-list 101 deny ip 172.16.0.0 0.15.255.255 any access-list 101 deny ip 192.0.2.0 0.0.0.255 any access-list 101 deny ip 192.168.0.0 0.0.255.255 any access-list 101 deny ip 198.18.0.0 0.1.255.255 any access-list 101 deny ip 224.0.0.0 0.15.255.255 any access-list 101 deny ip any host 255.255.255.255 access-list 101 permit tcp 67.228.209.128 0.0.0.15 any eq 1433 access-list 101 permit tcp host 120.136.2.22 any eq 1433 access-list 101 permit tcp host 123.100.90.58 any eq 1433 access-list 101 permit udp 67.228.209.128 0.0.0.15 any eq 1433 access-list 101 permit udp host 120.136.2.22 any eq 1433 access-list 101 permit udp host 123.100.90.58 any eq 1433 access-list 101 permit tcp any any eq 444 access-list 101 permit tcp any any eq 9000 access-list 101 permit tcp any any eq smtp access-list 101 permit udp any any eq non500-isakmp access-list 101 permit udp any any eq isakmp access-list 101 permit esp any any access-list 101 permit tcp any any eq 1723 access-list 101 permit gre any any access-list 101 permit tcp any any eq 22 access-list 101 permit tcp any any eq telnet access-list 102 remark Traffic allowed to enter the router from the Ethernet access-list 102 permit ip any host 192.168.0.254 access-list 102 deny ip any host 192.168.0.255 access-list 102 deny udp any any eq tftp log access-list 102 permit ip 192.168.0.0 0.0.0.255 192.168.99.0 0.0.0.255 access-list 102 deny ip any 0.0.0.0 0.255.255.255 log access-list 102 deny ip any 10.0.0.0 0.255.255.255 log access-list 102 deny ip any 127.0.0.0 0.255.255.255 log access-list 102 deny ip any 169.254.0.0 0.0.255.255 log access-list 102 deny ip any 172.16.0.0 0.15.255.255 log access-list 102 deny ip any 192.0.2.0 0.0.0.255 log access-list 102 deny ip any 192.168.0.0 0.0.255.255 log access-list 102 deny ip any 198.18.0.0 0.1.255.255 log access-list 102 deny udp any any eq 135 log access-list 102 deny tcp any any eq 135 log access-list 102 deny udp any any eq netbios-ns log access-list 102 deny udp any any eq netbios-dgm log access-list 102 deny tcp any any eq 445 log access-list 102 permit ip 192.168.0.0 0.0.0.255 any access-list 102 permit ip any host 255.255.255.255 access-list 102 deny ip any any log access-list 105 remark Traffic to NAT access-list 105 deny ip 192.168.0.0 0.0.0.255 192.168.99.0 0.0.0.255 access-list 105 permit ip 192.168.0.0 0.0.0.255 any access-list 106 remark User to Site VPN Clients access-list 106 permit ip 192.168.0.0 0.0.0.255 any dialer-list 1 protocol ip permit ! line con 0 no modem enable line aux 0 line vty 0 4 access-class 2 in transport input telnet ssh transport output none ! scheduler max-task-time 5000 ! end any ideas? :)

  Read the article

• Allowing access to subnets openvpn access server

  - by user3882976

  I have a centos server running a openvpn access server. On that server I am running a windows server in virtual box. On the centos server I am running the vpn with a network address 172.27.224.0 with 20 bits. The windows server is running a dchp server giving ip's of 192.168.1.0-200. When i try to connect to the widows shared folder from the vpn i can't using the name of the server but i can from the ip.

  Read the article

• Mercurial set per user rights

  - by Kami

  I would like to set better user access to my mercurial repos trough the cgi web interface. This is my current hgweb.config : [web] contact = first.lastname description = HG Repos allow_push=user1,user2,user3 allow_read=user1,user2,user3 [paths] repo01 = /home/mercurial/repo01 repo02 = /home/mercurial/repo02 repo03 = /home/mercurial/repo03 repo04 = /home/mercurial/repo04 How to setup the following ? : user1 has only access (push/read) to repo01 and repo02 user2 has only access (read only) to repo01 and repo02 user3 has only access (read) to repo01 and repo02, (push/read) repo03 I've checked multiple mercurial config tutorials but nothing helped me so far.

  Read the article

• Granting rights to Windows domain Users in Ubuntu?

  - by Pseudonymous

  I've connected an Ubuntu 9.10 server to my Windows domain with Likewise Open. I am able to log into the server with my domain account (as DOMAIN\user), but my administrative rights don't carry over. How can I grant admin rights to domain user accounts?

  Read the article

• iOS Facebook Access Token To Get User Wall Feed (status)

  - by Felix

  [DISCLAIMER : None of the access token or ID below here are real] I've done research for three solid days and no result on how to get user wall feed(post). I have used https://graph.facebook.com/oauth/access_token?client_id=YOUR_APP_ID&client_secret=YOUR_APP_SECRET&grant_type=client_credentials and get the access token which is something like this access_token=454345994651138|bAMGfuW-ueNXGCahley7ga125HN and then https://graph.facebook.com/100005939123542/feed?access_token=454345994651138|bAMGfuW-ueNXGCahley7ga125HN It gives me general information such as user's likes, name, id, current city... but NOT user's wall posts. I've learned that there are three types of access token, which is App Token, User Token, and Page Token. In order to get user/feed by using graphAPI, I need to request to get User Token, but there's NO information in the lousy Facebook Doc! (Which frustrated me the most!) In order to generate the user access token, we need to set some permission, generate the access token, and GET the user's wall feed, which is in JSON format. My question is : How do I get the User Access Token in order to get user wall post in iOS Xcode?

  Read the article

• DB user can see no table using ODBC link in MS Access

  - by bpraveen

  Hi, We are facing an issue with MS access. There are two users having the same access for tables and previliges in database. But one user can access the tables from MS access and another user can't. Can you please let me know the reason. Thanks for updating from options. I am looking in to it. User having grant permissions for SELECT ANY TABLE, it works for SQL connection (E.g. Toad or SQL +), but not for MS Access Is there any issue with MS-Access. Please update me.

  Read the article

• MS Access questions - Scalability / indexing / transactions

  - by oo

  A few questions on MS Access databases - Size: Are there limits to the size of an access database? The reason i ask is that we have an access database that has a few simple tables. The size of the db is about 1GB. When I do a query on it, i see it taking over 10 minutes to run. With proper indexing, should MS Access be able to handle this or are there fundamental limitations to the technology. This is MS Access XP. Also, does MS Access support db transactions, commit and rollback?

  Read the article

• login .bat script in windows xp user to run with admin rights

  - by Kryan

  if exist C:\Windows\System32\CCM\CcmExec.exe ( net use /del Z: ) else ( net use z: \\c-svsccm01\SMS_CMB\Client start /d "Z:\" CCMSetup.exe ) This is a .bat file i created to run a .exe file in the mapped location "Z:\".it runs perfectly in the administrator account but not in the user account(which dosnt hav admin rights to install a .exe file) in the user account, the mapping can be created and deleted but running the CCMSetup.exe dosnt work. pls help how to run this CCMSetup.exe with admin rights in the user account.

  Read the article

• Weird Apache Access Logs

  - by user38480

  I see repeated requests like these in my Apache Access Logs and they have been eating up all my CPU. I have a normal WordPress installation. All i changed in the Apache Configuration was changing the DocumentRoot from /var/www/html to /var/www for both ssl and the default configuration. Also, the file referenced in the requests(updatedll.jpeg) does not exist on my server and also isn't referenced in the source code served by any page of the web application. Could this be a security threat? What are these actually and what can i do to stop them. I changed the ip address of my server. They still kept coming. Meaning that somebody is actually hitting the domain name and not the ip address. Why does my server send a 301 for these requests? Shouldn't it be sending a 404? Is it because Wordpress is installed in my root directory and the .htaccess file present for Wordpress is sending a 301 redirect? My disk access logs also seem to have high peaks intermittently. But nobody is actually accessing the site. I see no access logs except these below. Also, i see that all the requests seem to be coming from one of the following 5 ip addresses. 201.4.132.43 - - [05/Jun/2014:07:35:08 -0400] "GET /updatedll.jpg HTTP/1.1" 301 465 "-" "Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; WOW64; Trident/4.0; BTRS103681; GTB7.5; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; InfoPath.2; OfficeLiveConnector.1.3; OfficeLivePatch.0.0; AskTbATU3/5.15.29.67612; BRI/2)" 187.40.241.48 - - [05/Jun/2014:07:35:08 -0400] "GET /updatedll.jpg HTTP/1.1" 301 465 "-" "Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Trident/4.0; GTB7.5; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)" 186.56.134.132 - - [05/Jun/2014:07:35:10 -0400] "GET /updatedll.jpg HTTP/1.0" 301 428 "-" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322)" 71.223.252.14 - - [05/Jun/2014:07:35:13 -0400] "GET /updatedll.jpg HTTP/1.1" 301 465 "-" "Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Trident/4.0; BTRS31756; GTB7.5; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; .NET4.0C; .NET4.0E; InfoPath.2)" 85.245.229.167 - - [05/Jun/2014:07:35:14 -0400] "GET /updatedll.jpg HTTP/1.1" 301 465 "-" "Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; Trident/7.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; MAAU; .NET4.0C; BRI/2; .NET4.0E; MAAU)"

  Read the article

• Linksys WAP54G v3.1 no access, power and link LED solid

  - by user142113

  I'm managing the Network of a small enterprise. A Linksys WAP54G v3.1 used to provide the WiFi network. I was called, because the device did not provide a WiFi network anymore. I first of all tried to ping the device via LAN, but there was no reaction. I've frequently reconnected the AP to the mains and always the POWER and the LINK LED keep solid, even if no network cable is connected. What I've done yet: Reset as documented: Pressed the RESET button for 10 seconds. After that I have tried to access the AP with a direct cable connection to my computer, that I've set to a static ip of 192.168.1.240, but i got no ping response on the default IP 192.168.1.245. Furthermore ipconfig reports "media disconnected". More complex reset method as described here http://bruceshankle.blogspot.de/2005/12/how-to-reset-linksys-wap54g.html as well had no effect. also tried to ping 192.168.1.1 without success Tried this method: http://www.daniweb.com/hardware-and-software/networking/threads/142437/linksys-wireless-access-point-problem#post680245 but there was no ping response when powering up. As well the tftp transfer timed out Finally tried to short pin 15 and 16 of the flash chip on the bottom side of the AP mainboard while booting to provoke a Checksum error. This should lead to the possibility to upload a firmware with tftp, as the AP stops booting and waits for a tftp connection on 192.168.1.1. But I've had no success. As well i've put pin 15 and 16 to ground while booting, also without an effect. After all that I still can't ping the AP, ipconfig still tells me "media disconnected". The POWER and LINK LED are solid. I would appreciate your answers

  Read the article

• Have local admin privileges on Windows XP, but getting "Error terminating process: Access is denied"

  - by Chris W. Rea

  On one of the Windows XP machines I use regularly, there is a process that starts up periodically. I'd like to be able to kill the process – sometimes – because it occasionally runs when I'm busy doing something machine-intensive. I've already tried dropping the process priority to "Idle" to mitigate the effects, but it isn't the CPU that's the problem. Rather, the process is very disk-intensive and no matter the process priority, it still causes significant disk thrashing when running, impacting everything else I'm doing at the time. Using Process Explorer, I can find the process, right-click, and choose Kill Process, but I always get the message "Error terminating process: Access is denied." This is not an operating system process, but third-party software. What might that process be doing to prevent itself from being terminated? How can I kill such a process? Is there a way for me to modify the process's security or access control list (ACL) somewhere, using Process Explorer or another tool, so that I can effectively kill it?

  Read the article

• Microsoft Access: computer freezes when user tries to update record

  - by CarlF

  A colleague and I have developed an Access 2003 database which is used throughout our department. Currently about four dozen people do data entry using one of two very similar forms. If 47 of us use them, they work perfectly. If Mr. 48 clicks the "Save" button, Windows XP freezes and a hard reset is needed. The problem has to be on his specific computer (Dell latitude D630) and not in the code because this problem only affects him. Complicating the matter: I don't work for IS, and this project is not supported by IS. If I'm going to get our tech support to fix the problem I had better be able to explain exactly what to do and how to do it, because they aren't going to invest any resources. I don't even have admin rights on the computer (and neither does its regular user). I've asked him to bring his laptop the next time he visits my building. (Just to make matters worse, he doesn't usually work in the same location as me or the other developer.) Any suggestions on debugging the problem? My first try will be to uninstall and reinstall Office, which I can do using corporate utilities without being admin. Note: yes, those are old versions of Office and Windows. We expect to upgrade later this year.

  Read the article

• Interesting phenomenom with Windows Server 2008 R2 user access controls and NTFS ACLs

  - by Simon Catlin

  One to try, and I'd appreciate any thoughts on this. On a Windows Server 2008 R2 box (or presumably 2008 R1, Windows Vista or Windows 7): i) Logon as an administrator, and create a new NTFS volume ii) Blow away the standard MS ACLS on the root of the volume (which are laughable), and replace with Administrators:Full Control, System:Full Control, e.g.: echo Y|cacls.exe d:\ /g "Administrators:F" "SYSTEM:F" iii) Now, from a Command Prompt shell window or PowerShell window, switch to that drive (cd /d D:\ or set-location D:\ ). Works fine... no issues. iv) Now, try to browse to the root of the new volume using MS Explorer... Access denied. Now, I've kind of convinced myself that it is UAC getting in the way, as you can add "Authenticated Users:List" access to D:\ and Explorer then works. I can only assume that MS Explorer isn't able to use the "admin" token for the Administrator. Browsing to explorer.exe and doing a "Run as administrator" has no effect. Any thoughts? Cheers in advance.

  Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >