Search Results

Search found 5299 results on 212 pages for 'black hat'.

Page 14/212 | < Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >

  • Why should you choose Oracle WebLogic 12c instead of JBoss EAP 6?

    - by Ricardo Ferreira
    In this post, I will cover some technical differences between Oracle WebLogic 12c and JBoss EAP 6, which was released a couple days ago from Red Hat. This article claims to help you in the evaluation of key points that you should consider when choosing for an Java EE application server. In the following sections, I will present to you some important aspects that most customers ask us when they are seriously evaluating for an middleware infrastructure, specially if you are considering JBoss for some reason. I would suggest that you keep the following question in mind while you are reading the points: "Why should I choose JBoss instead of WebLogic?" 1) Multi Datacenter Deployment and Clustering - D/R ("Disaster & Recovery") architecture support is embedded on the WebLogic Server 12c product. JBoss EAP 6 on the other hand has no direct D/R support included, Red Hat relies on third-part tools with higher prices. When you consider a middleware solution to host your business critical application, you should worry with every architectural aspect that are related with the solution. Fail-over support is one little aspect of a truly reliable solution. If you do not worry about D/R, your solution will not be reliable. Having said that, with Red Hat and JBoss EAP 6, you have this extra cost that will increase considerably the total cost of ownership of the solution. As we commonly hear from analysts, open-source are not so cheaper when you start seeing the big picture. - WebLogic Server 12c supports advanced LAN clustering, detection of death servers and have a common alert framework. JBoss EAP 6 on the other hand has limited LAN clustering support with no server death detection. They do not generate any alerts when servers goes down (only if you buy JBoss ON which is a separated technology, but until now does not support JBoss EAP 6) and manual intervention are required when servers goes down. In most cases, admin people must rely on "kill -9", "tail -f someFile.log" and "ps ax | grep java" commands to manage failures and clustering anomalies. - WebLogic Server 12c supports the concept of Node Manager, which is a separated process that runs on the physical | virtual servers that allows extend the administration of the cluster to WebLogic managed servers that are often distributed across multiple machines and geographic locations. JBoss EAP 6 on the other hand has no equivalent technology. Whole server instances must be managed individually. - WebLogic Server 12c Node Manager supports Coherence to boost performance when managing servers. JBoss EAP 6 on the other hand has no similar technology. There is no way to coordinate JBoss and infiniband instances provided by JBoss using high throughput and low latency protocols like InfiniBand. The Node Manager feature also allows another very important feature that JBoss EAP lacks: secure the administration. When using WebLogic Node Manager, all the administration tasks are sent to the managed servers in a secure tunel protected by a certificate, which means that the transport layer that separates the WebLogic administration console from the managed servers are secured by SSL. - WebLogic Server 12c are now integrated with OTD ("Oracle Traffic Director") which is a web server technology derived from the former Sun iPlanet Web Server. This software complements the web server support offered by OHS ("Oracle HTTP Server"). Using OTD, WebLogic instances are load-balanced by a high powerful software that knows how to handle SDP ("Socket Direct Protocol") over InfiniBand, which boost performance when used with engineered systems technologies like Oracle Exalogic Elastic Cloud. JBoss EAP 6 on the other hand only offers support to Apache Web Server with custom modules created to deal with JBoss clusters, but only across standard TCP/IP networks.  2) Application and Runtime Diagnostics - WebLogic Server 12c have diagnostics capabilities embedded on the server called WLDF ("WebLogic Diagnostic Framework") so there is no need to rely on third-part tools. JBoss EAP 6 on the other hand has no diagnostics capabilities. Their only diagnostics tool is the log generated by the application server. Admin people are encouraged to analyse thousands of log lines to find out what is going on. - WebLogic Server 12c complement WLDF with JRockit MC ("Mission Control"), which provides to administrators and developers a complete insight about the JVM performance, behavior and possible bottlenecks. WebLogic Server 12c also have an classloader analysis tool embedded, and even a log analyzer tool that enables administrators and developers to view logs of multiple servers at the same time. JBoss EAP 6 on the other hand relies on third-part tools to do something similar. Again, only log searching are offered to find out whats going on. - WebLogic Server 12c offers end-to-end traceability and monitoring available through Oracle EM ("Enterprise Manager"), including monitoring of business transactions that flows through web servers, ESBs, application servers and database servers, all of this with high deep JVM analysis and diagnostics. JBoss EAP 6 on the other hand, even using JBoss ON ("Operations Network"), which is a separated technology, does not support those features. Red Hat relies on third-part tools to provide direct Oracle database traceability across JVMs. One of those tools are Oracle EM for non-Oracle middleware that manage JBoss, Tomcat, Websphere and IIS transparently. - WebLogic Server 12c with their JRockit support offers a tool called JRockit Flight Recorder, which can give developers a complete visibility of a certain period of application production monitoring with zero extra overhead. This automatic recording allows you to deep analyse threads latency, memory leaks, thread contention, resource utilization, stack overflow damages and GC ("Garbage Collection") cycles, to observe in real time stop-the-world phenomenons, generational, reference count and parallel collects and mutator threads analysis. JBoss EAP 6 don't even dream to support something similar, even because they don't have their own JVM. 3) Application Server Administration - WebLogic Server 12c offers a complete administration console complemented with scripting and macro-like recording capabilities. A single WebLogic console can managed up to hundreds of WebLogic servers belonging to the same domain. JBoss EAP 6 on the other hand has a limited console and provides a XML centric administration. JBoss, after ten years, started the development of a rudimentary centralized administration that still leave a lot of administration tasks aside, so admin people and developers must touch scripts and XML configuration files for most advanced and even simple administration tasks. This lead applications to error prone and risky deployments. Even using JBoss ON, JBoss EAP are not able to offer decent administration features for admin people which must be high skilled in JBoss internal architecture and its managing capabilities. - Oracle EM is available to manage multiple domains, databases, application servers, operating systems and virtualization, with a complete end-to-end visibility. JBoss ON does not provide management capabilities across the complete architecture, only basic monitoring. Even deployment must be done aside JBoss ON which does no integrate well with others softwares than JBoss. Until now, JBoss ON does not supports JBoss EAP 6, so even their minimal support for JBoss are not available for JBoss EAP 6 leaving customers uncovered and subject to high skilled JBoss admin people. - WebLogic Server 12c has the same administration model whatever is the topology selected by the customer. JBoss EAP 6 on the other hand differentiates between two operational models: standalone-mode and domain-mode, that are not consistent with each other. Depending on the mode used, the administration skill is different. - WebLogic Server 12c has no point-of-failures processes, and it does not need to define any specialized server. Domain model in WebLogic is available for years (at least ten years or more) and is production proven. JBoss EAP 6 on the other hand needs special processes to garantee JBoss integrity, the PC ("Process-Controller") and the HC ("Host-Controller"). Different from WebLogic, the domain model in JBoss is quite new (one year at tops) of maturity, and need to mature considerably until start doing things like WebLogic domain model does. - WebLogic Server 12c supports parallel deployment model which enables some artifacts being deployed at the same time. JBoss EAP 6 on the other hand does not have any similar feature. Every deployment are done atomically in the containers. This means that if you have a huge EAR (an EAR of 120 MB of size for instance) and deploy onto JBoss EAP 6, this EAR will take some minutes in order to starting accept thread requests. The same EAR deployed onto WebLogic Server 12c will reduce the deployment time at least in 2X compared to JBoss. 4) Support and Upgrades - WebLogic Server 12c has patch management available. JBoss EAP 6 on the other hand has no patch management available, each JBoss EAP instance should be patched manually. To achieve such feature, you need to buy a separated technology called JBoss ON ("Operations Network") that manage this type of stuff. But until now, JBoss ON does not support JBoss EAP 6 so, in practice, JBoss EAP 6 does not have this feature. - WebLogic Server 12c supports previuous WebLogic domains without any reconfiguration since its kernel is robust and mature since its creation in 1995. JBoss EAP 6 on the other hand has a proven lack of supportability between JBoss AS 4, 5, 6 and 7. Different kernels and messaging engines were implemented in JBoss stack in the last five years reveling their incapacity to create a well architected and proven middleware technology. - WebLogic Server 12c has patch prescription based on customer configuration. JBoss EAP 6 on the other hand has no such capability. People need to create ticket supports and have their installations revised by Red Hat support guys to gain some patch prescription from them. - Oracle WebLogic Server independent of the version has 8 years of support of new patches and has lifetime release of existing patches beyond that. JBoss EAP 6 on the other hand provides patches for a specific application server version up to 5 years after the release date. JBoss EAP 4 and previous versions had only 4 years. A good question that Red Hat will argue to answer is: "what happens when you find issues after year 5"?  5) RAC ("Real Application Clusters") Support - WebLogic Server 12c ships with a specific JDBC driver to leverage Oracle RAC clustering capabilities (Fast-Application-Notification, Transaction Affinity, Fast-Connection-Failover, etc). Oracle JDBC thin driver are also available. JBoss EAP 6 on the other hand ships only the standard Oracle JDBC thin driver. Load balancing with Oracle RAC are not supported. Manual intervention in case of planned or unplanned RAC downtime are necessary. In JBoss EAP 6, situation does not reestablish automatically after downtime. - WebLogic Server 12c has a feature called Active GridLink for Oracle RAC which provides up to 3X performance on OLTP applications. This seamless integration between WebLogic and Oracle database enable more value added to critical business applications leveraging their investments in Oracle database technology and Oracle middleware. JBoss EAP 6 on the other hand has no performance gains at all, even when admin people implement some kind of connection-pooling tuning. - WebLogic Server 12c also supports transaction and web session affinity to the Oracle RAC, which provides aditional gains of performance. This is particularly interesting if you are creating a reliable solution that are distributed not only in an LAN cluster, but into a different data center. JBoss EAP 6 on the other hand has no such support. 6) Standards and Technology Support - WebLogic Server 12c is fully Java EE 6 compatible and production ready since december of 2011. JBoss EAP 6 on the other hand became fully compatible with Java EE 6 only in the community version after three months, and production ready only in a few days considering that this article was written in June of 2012. Red Hat says that they are the masters of innovation and technology proliferation, but compared with Oracle and even other proprietary vendors like IBM, they historically speaking are lazy to deliver the most newest technologies and standards adherence. - Oracle is the steward of Java, driving innovation into the platform from commercial and open-source vendors. Red Hat on the other hand does not have its own JVM and relies on third-part JVMs to complete their application server offer. 95% of Red Hat customers are using Oracle HotSpot as JVM, which means that without Oracle involvement, their support are limited exclusively to the application server layer and we all know that most problems are happens in the JVM layer. - WebLogic Server 12c supports natively JDK 7, which empower developers to explore the maximum of the Java platform productivity when writing code. This feature differentiate WebLogic from others application servers (except GlassFish that are also managed by Oracle) because the usage of JDK 7 introduce such remarkable productivity features like the "try-with-resources" enhancement, catching multiple exceptions with one try block, Strings in the switch statements, JVM improvements in terms of JDBC, I/O, networking, security, concurrency and of course, the most important feature of Java 7: native support for multiple non-Java languages. More features regarding JDK 7 can be found here. JBoss EAP 6 on the other hand does not support JDK 7 officially, they comment in their community version that "Java SE 7 can be used with JBoss 7" which does not gives you any guarantees of enterprise support for JDK 7. - Oracle WebLogic Server 12c supports integration with Spring framework allowing Spring applications to use WebLogic special transaction manager, exposing bean interfaces to WebLogic MBeans to take advantage of all WebLogic monitoring and administration advantages. JBoss EAP 6 on the other hand has no special integration with Spring. In fact, Red Hat offers a suspicious package called "JBoss Web Platform" that in theory supports Spring, but in practice this package does not offers any special integration. It is just a facility for Red Hat customers to have support from both JBoss and Spring technology using the same customer support. 7) Lightweight Development - Oracle WebLogic Server 12c and Oracle GlassFish are completely integrated and can share applications without any modifications. Starting with the 12c version, WebLogic now understands natively GlassFish deployment descriptors and specific configurations in order to offer you a truly and reliable migration path from a community Java EE application server to a enterprise middleware product like WebLogic. JBoss EAP 6 on the other hand has no support to natively reuse an existing (or still in development) application from JBoss AS community server. Users of JBoss suffer of critical issues during deployment time that includes: changing the libraries and dependencies of the application, patching the DTD or XSD deployment descriptors, refactoring of the application layers due classloading issues and anomalies, rebuilding of persistence, business and web layers due issues with "usage of the certified version of an certain dependency" or "frameworks that Red Hat potentially does not recommend" etc. If you have the culture or enterprise IT directive of developing Java EE applications using community middleware to in a certain future, transition to enterprise (supported by a vendor) middleware, Oracle WebLogic plus Oracle GlassFish offers you a more sustainable solution. - WebLogic Server 12c has a very light ZIP distribution (less than 165 MB). JBoss EAP 6 ZIP size is around 130 MB, together with JBoss ON you have more 100 MB resulting in a higher download footprint. This is particularly interesting if you plan to use automated setup of application server instances (for example, to rapidly setup a development or staging environment) using Maven or Hudson. - WebLogic Server 12c has a complete integration with Maven allowing developers to setup WebLogic domains with few commands. Tasks like downloading WebLogic, installation, domain creation, data sources deployment are completely integrated. JBoss EAP 6 on the other hand has a limited offer integration with those tools.  - WebLogic Server 12c has a startup mode called WLX that turns-off EJB, JMS and JCA containers leaving enabled only the web container with Java EE 6 web profile. JBoss EAP 6 on the other hand has no such feature, you need to disable manually the containers that you do not want to use. - WebLogic Server 12c supports fastswap, which enables you to change classes without redeployment. This is particularly interesting if you are developing patches for the application that is already deployed and you do not want to redeploy the entire application. This is the same behavior that most application servers offers to JSP pages, but with WebLogic Server 12c, you have the same feature for Java classes in general. JBoss EAP 6 on the other hand has no such support. Even JBoss EAP 5 does not support this until now. 8) JMS and Messaging - WebLogic Server 12c has a proven and high scalable JMS implementation since its initial release in 1995. JBoss EAP 6 on the other hand has a still immature technology called HornetQ, which was introduced in JBoss EAP 5 replacing everything that was implemented in the previous versions. Red Hat loves to introduce new technologies across JBoss versions, playing around with customers and their investments. And when they are asked about why they have changed the implementation and caused such a mess, their answer is always: "the previous implementation was inadequate and not aligned with the community strategy so we are creating a new a improved one". This Red Hat practice leads to uncomfortable investments that in a near future (sometimes less than a year) will be affected in someway. - WebLogic Server 12c has troubleshooting and monitoring features included on the WebLogic console and WLDF. JBoss EAP 6 on the other hand has no direct monitoring on the console, activity is reflected only on the logs, no debug logs available in case of JMS issues. - WebLogic Server 12c has extremely good performance and scalability. JBoss EAP 6 on the other hand has a JMS storage mechanism relying on Oracle database or MySQL. This means that if an issue in production happens and Red Hat affirms that an performance issue is happening due to database problems, they will not support you on the performance issue. They will orient you to call Oracle instead. - WebLogic Server 12c supports messaging enterprise features like SAF ("Store and Forward"), Distributed Queues/Topics and Foreign JMS providers support that leverage JMS implementations without compromise developer code making things completely transparent. JBoss EAP 6 on the other hand do not even dream to support such features. 9) Caching and Grid - Coherence, which is the leading and most mature data grid technology from Oracle, is available since early 2000 and was integrated with WebLogic in 2009. Coherence and WebLogic clusters can be both managed from WebLogic administrative console. Even Node Manager supports Coherence. JBoss on the other hand discontinued JBoss Cache, which was their caching implementation just like they did with the messaging implementation (JBossMQ) which was a issue for long term customers. JBoss EAP 6 ships InfiniSpan version 1.0 which is immature and lack a proven record of successful cases and reliability. - WebLogic Server 12c has a feature called ActiveCache which uses Coherence to, without any code changes, replicate HTTP sessions from both WebLogic and other application servers like JBoss, Tomcat, Websphere, GlassFish and even Microsoft IIS. JBoss EAP 6 on the other hand does have such support and even when they do in the future, they probably will support only their own application server. - Coherence can be used to manage both L1 and L2 cache levels, providing support to Oracle TopLink and others JPA compliant implementations, even Hibernate. JBoss EAP 6 and Infinispan on the other hand supports only Hibernate. And most important of all: Infinispan does not have any successful case of L1 or L2 caching level support using Hibernate, which lead us to reflect about its viability. 10) Performance - WebLogic Server 12c is certified with Oracle Exalogic Elastic Cloud and can run unchanged applications at this engineered system. This approach can benefit customers from Exalogic optimization's of both kernel and JVM layers to boost performance in terms of 10X for web, OLTP, JMS and grid applications. JBoss EAP 6 on the other hand has no investment on engineered systems: customers do not have the choice to deploy on a Java ultra fast system if their project becomes relevant and performance issues are detected. - WebLogic Server 12c maintains a performance gain across each new release: starting on WebLogic 5.1, the overall performance gain has been close to 4X, which close to a 20% gain release by release. JBoss on the other hand does not provide SPECJAppServer or SPECJEnterprise performance benchmarks. Their so called "performance gains" remains hidden in their customer environments, which lead us to think if it is true or not since we will never get access to those environments. - WebLogic Server 12c has industry performance benchmarks with submissions across platforms and configurations leading SPECJ. Oracle WebLogic leads SPECJAppServer performance in multiple categories, fitting all customer topologies like: dual-node, single-node, multi-node and multi-node with RAC. JBoss... again, does not provide any SPECJAppServer performance benchmarks. - WebLogic Server 12c has a feature called work manager which allows your application to embrace new performance levels based on critical resource utilization of the CPUs usage. Work managers prioritizes work and allocates threads based on an execution model that takes into account administrator-defined parameters and actual run-time performance and throughput. JBoss EAP 6 on the other hand has no compared feature and probably they never will. Not supporting such feature like work managers, JBoss EAP 6 forces admin people and specially developers to uncover performance gains in a intrusive way, rewriting the code and doing performance refactorings. 11) Professional Services Support - WebLogic Server 12c and any other technology sold by Oracle give customers the possibility of hire OCS ("Oracle Consulting Services") to manage critical scenarios, deployment assistance of new applications, high skilled consultancy of architecture, best practices and people allocation together with customer teams. All OCS services are available without any restrictions, having the customer bought software from Oracle or just starting their implementation before any acquisition. JBoss EAP 6 or Red Hat to be more specifically, only offers professional services if you buy subscriptions from them. If you are developing a new critical application for your business and need the help of Red Hat for a serious issue or architecture decision, they will probably say: "OK... I can help you but after you buy subscriptions from me". Red Hat also does not allows their professional services consultants to manage environments that uses community based software. They will probably force you to first buy a subscription, download their "enterprise" version and them, optionally hire their consultants. - Oracle provides you our university to educate your team into our technologies, including of course specialized trainings of WebLogic application server. At any time and location, you can hire Oracle to train your team so you get trustful knowledge according to your specific needs. Certifications for the products are also available if your technical people desire to differentiate themselves as professionals. Red Hat on the other hand have a limited pool of resources to train your team in their technologies. Basically they are selling training and certification for RHEL ("Red Hat Enterprise Linux") but if you demand more specialized training in JBoss middleware, they will probably connect you to some "certified" partner localized training since they are apparently discontinuing their education center, at least here in Brazil. They were not able to reproduce their success with RHEL education to their middleware division since they need first sell the subscriptions to after gives you specialized training. And again, they only offer you specialized training based on their enterprise version (EAP in the case of JBoss) which means that the courses will be a quite outdated. There are reports of developers that took official training's from Red Hat at this year (2012) and in a certain JBoss advanced course, Red Hat supposedly covered JBossMQ as the messaging subsystem, and even the printed material provided was based on JBossMQ since the training was created for JBoss EAP 4.3. 12) Encouraging Transparency without Ulterior Motives - WebLogic Server 12c like any other software from Oracle can be downloaded any time from anywhere, you should only possess an OTN ("Oracle Technology Network") credential and you can download any enterprise software how many times you want. And is not some kind of "trial" version. It is the official binaries that will be running for ever in your data center. Oracle does not encourages the usage of "specific versions" of our software. The binaries you buy from Oracle are the same binaries anyone in the world could download and use for testing and personal education. JBoss EAP 6 on the other hand are not available for download unless you buy a subscription and get access to the Red Hat enterprise repositories. If you need to test, learn or just start creating your application using Red Hat's middleware software, you should download it from the community website. You are not allowed to download the enterprise version that, according to Red Hat are more secure, reliable and robust. But no one of us want to start the development of a software with an unsecured, unreliable and not scalable middleware right? So what you do? You are "invited" by Red Hat to buy subscriptions from them to get access to the "cool" version of the software. - WebLogic Server 12c prices are publicly available in the Oracle website. If you want to know right now how much WebLogic will cost to your organization, just click here and get access to our price list. In the case of WebLogic, check out the "US Oracle Technology Commercial Price List". Oracle also encourages you to get in touch with a sales representative to discuss discounts that would make possible the investment into our technology. But you are not required to do this, only if you are interested in buying our technology or maybe you want to discuss some discount scenarios. JBoss EAP 6 on the other hand does not have its cost publicly available in Red Hat's website or in any other media, at least is not so easy to get such information. The only link you will possibly find in their website is a "Contact a Sales Representative" link. This is not a very good relationship between an customer and an vendor. This is not an example of transparency, mainly when the software are sold as open. In this situations, customers expects to see the software prices publicly available, so they can have the chance to decide, based on the existing features of the software, if the cost is fair or not. Conclusion Oracle WebLogic is the most mature, secure, reliable and scalable Java EE application server of the market, and have a proven record of success around the globe to prove it's majority. Don't lose the chance to discover today how WebLogic could fit your needs and sustain your global IT middleware strategy, no matter if your strategy are completely based on the Cloud or not.

    Read the article

  • Oracle Enterprise Linux or Red Hat Enterprise Linux?

    - by peturgretars
    I would highly appreciate hearing some opinions regarding the choice of Linux distribution when it comes to setting up an Oracle 11.2.0.3 RAC. We are about to install 2 node Oracle 11.2.0.3 RAC's in data centers A and B. Then we are going to have a standby in B for A and a standby in A for B using Data Guard in ASYNC transmit (long distance). Personally I have more experience with OEL and I know that for example Oracle Smart Flash Cache and zero patching downtime were only supported in OEL 5. I am not sure about OEL 6 vs RHEL 6 though. My question is, which Operating System should we go for and why, Oracle Enterprise Linux 5/6 or Red Hat Enterprise Linux 5/6? The hosting company is unfortunately not supporting OEL at the moment so if OEL is the choice then how would convince the hosting company to start using OEL and supporting it? Thanks so much!

    Read the article

  • Learning SQL White hat Hacking

    - by user301751
    Well here goes a sligtly arwkward question, I have changed job roles from Network Admin to SQL Server DBA thus having to learn SQL server 2005. I am quite self motivated and have learned the basics of Transac and a little about Reporting services. The only thing is I need to set senarios as theres not much coming in at work in the way of SQL tasks. I have always kept my interest in networking by setting little "Hacking tasks", I have has a look at some crackme's but can find nothing to play with. I understand the SQL injection is some sort of SQL hack but found not much on the subject. I know my way of learning might be a bit different from others but it is all White Hat and keeps my interest. Thanks

    Read the article

  • Vista logs into black screen, "Application Error 0xc0000022" for explorer.exe

    - by IMAPC
    Whenever I attempt to log into a Windows Vista computer (the only account on it), I'm presented with a black screen & a cursor. I can open Task Manager, and from there I can launch applications. It seems to be using Aero Basic (instead of the full Aero which I had set as default before the problem started). When attempting to launch "explorer.exe" I get "explorer.exe - Application Error 'The application failed to initialize properly (0xc0000022). Click OK to terminate the application.'" Every now and then I get an error along the lines of "the application has failed to start because its side by side configuration is incorrect please see the application event log for more detail." I can boot into safe mode successfully, but I still get the black screen when I log into it in regular mode. I've tried most of the suggestions here, but did not work. I'm attempting to back up everything right now in case the only fix is to reinstall Windows. Has anyone seen this before?

    Read the article

  • Black Screen and System Hang - Possibly CPU overheating

    - by Mahesh
    I have this old computer - P4 2.0ghz, 1.2GB RAM and onboard graphics(no external card), 80GBHDD. It has xubuntu installed on it and it regularly hangs when it takes more system resources for say like graphical programs, too many tabs on firefox etc. It just either hangs the system or shows black screen. Tested if it was issue of HD but it wasn't because i have used linux livecd and problem is still the same even if I have removed the HD. I have also tested with USB linux (puppy linux and ubuntu linux on 8gb drives). Tested windows XP as well on this HD and results are the same. Tested another HD on this machine, results are still the same with it. System hangs or goes black screen and requires restart. I thought later it could be thermal heat issue and then applied thermal paste on heatsink but still it fails to work for me. It continues to show symptoms. Another thing which was yet to be tested is changing of CPU fan which was not done because I have not found any fan for old pentium 4 machine in the market. I have to hit online stores (but i am in india and it's hard to find it in online shops which can deliver it to me). So far I don't see this as HD or Monitor or OS issue because I have tested with other HD and results are the same. So it could be either CPU fan or motherboard? What could be possible issue with the hardware?

    Read the article

  • Unable to ssh in Beagle Bone Black

    - by SamuraiT
    I wanted to install pip onto beagle bone black,and I tried this: /usr/bin/ntpdate -b -s -u pool.ntp.org opkg update && opkg install python-pip python-setuptools then, it threw errors,but Unfortunately, I didn't log that errors. it was occurred a week ago and was't solved yet. I wanted to solve it now and I tried connect by ssh,but I failed. When I ping to beagle bone, it responds, and Cloud9 IDE is working too but not ssh. I don't think this is serious problem since I can connect to beagle bone by other methods: Cloud9 or so. However, to use python on beagle bone, I need to connect by ssh. Before trying to update and install python-pip, I could connect by ssh. Do you have any ideas to solve this connection problem? note I use default OS: Angstrom I don't use SD card. HOST PC is mac, OS.X 10.9 connect by USB serial I checked this but this wasn't helpful http://stackoverflow.com/questions/19233516/cannot-connect-to-beagle-bone-black I could connect by GateOne SSH client, but still unable to connect from terminal.

    Read the article

  • Screen randomly goes blue/black/white

    - by FubsyGamer
    Problem Randomly, while using my computer, the monitor goes dark grey/almost black, or it goes white with faint grey vertical lines, or it goes blue with black vertical lines. It's as if the computer powers off. People tell me I sign out of Skype, Spotify stops playing when it happens, etc. When I look at the tower, it doesn't seem like it's off at all. Nothing changes, fans are spinning, lights are on, etc. If you were only looking at the tower, you'd never know there was a problem The only way I can get it to come back up is to push and hold the power button and turn it off, then back on This never happens while I'm playing video games. I've done 5-6 hour sessions of League of Legends, and it doesn't do anything When I'm just browsing the web, reading email, checking Reddit, etc, it happens all the time. It can happen multiple times in a session, it usually takes only about 5 minutes from the time I start browsing to when the computer crashes This started happening after I moved to a new apartment (this has to be relevant somehow, it was not happening where I lived before) There is nothing in the crash logs or event logs System Specs i5 2500k CPU AMD Radeon 6800 GPU Gigabyte z68a-d3h-b3 motherboard WD VelociRaptor 1 TB HDD Screenshots Device manager About screen Things I have tried I was getting a WMI Error in my event logs, but I fixed it using Microsoft's fix, KB 2545227 I was using Windows 8. I wiped the HDD and downgraded to Windows 7 64 bit I took out the video card and used a can of air to totally clean out the video card, all fans, and the inside of the computer in general. I made sure all of the video card pins were fine, then reconnected it I tried to update my motherboard BIOS, but anything I downloaded from Gigabyte was only for 32 bit machines, not 64. I don't even know how to tell what my motherboard BIOS is at right now I am using a power strip, and anything else connected to it works just fine If I re-seat the monitor cable while this is happening, nothing changes Please, help me. I've been battling this for several weeks now, and it's so frustrating it makes me not even want to use the computer.

    Read the article

  • [Gray Hat Python] Simple debugger, want work ??

    - by Rami Jarrar
    hi, i'm reading the Gray Hat Python,, i reach for this :: class debugger(): def __init__(self): self.h_process = None self.pid = None self.debugger_active = False def load(self,path_to_exe): creation_flags = DEBUG_PROCESS startupinfo = STARTUPINFO() process_information = PROCESS_INFORMATION() startupinfo.dwFlags = 0x1 startupinfo.wShowWindows = 0x0 startupinfo.cb = sizeof(startupinfo) if kernel32.CreateProcessA(path_to_exe, None, None, None, None, creation_flags, None, None, byref(startupinfo), byref(process_information)): print "[*] We have successfully launched the process!" print "[*] PID: %d"%(process_information.dwProcessId) self.h_process = self.open_process(process_information.dwProcessId) else: print "[*] Error: 0x%08x."%(kernel32.GetLastError()) def open_process(self,pid): h_process = self.open_process(pid) if kernel32.DebugActiveProcess(pid): self.debugger_active = True self.pid = int(pid) self.run() else: print "[*] Unable to attach to the process." def run(self): while self.debugger_active == True: self.get_debug_event() def get_debug_event(self): debug_event = DEBUG_EVENT() continue_status = DBG_CONTINUE if kernel32.WaitForDebugEvent(byref(debug_event), INFINITE): raw_input("Press a Key to continue...") self.debugger_active = False kernel32.ContinueDebugEvent( \ debug_event.dwProcessId, \ debug_event.dwThreadId, \ continue_status ) def detach(self): if kernel32.DebugActiveProcessStop(self.pid): print "[*] Finished debugging. Exiting..." return True else: print "There was an error" return False when run my_test.py :: import my_dbg debugger = my_dbg.debugger() pid = raw_input('Enter the PID of the process to attach to: ') debugger.open_process(int(pid)) debugger.detach() i get this error :: Traceback (most recent call last): File "C:/Python26/dbgpy/my_test.py", line 5, in <module> debugger.attach(int(pid)) File "C:/Python26/dbgpy\my_dbg.py", line 37, in attach h_process = self.attach(pid) ........... ........... ........... File "C:/Python26/dbgpy\my_dbg.py", line 37, in attach h_process = self.attach(pid) File "C:/Python26/dbgpy\my_dbg.py", line 37, in attach h_process = self.attach(pid) RuntimeError: maximum recursion depth exceeded its because the loop and something else, but what it is ?? I'm running on Windows using Python2.6.4.. :) Update:: i remove h_process = self.open_process(pid), but i get the same error for the next instruction if kernel32.DebugActiveProcess(pid) , so the problem i think in the loop while,, but what it is ???

    Read the article

  • Acer Aspire blank screen

    - by Gerep
    I'm using Ubuntu 11.04 Natty and when I installed it I had a problem with blank screen on startup and found a solution but I have the same problem when it is inactive and goes blank screen, it won't come back, so I have to restart. Any ideas? Thanks in advance for any help. This is what solved my first problem: When you start editing the /etc/rc.local and add before exit 0: setpci -s 00:02.0 F4.B=00 Edit /etc/default/grub, edit the line GRUB_CMDLINE_LINUX_DEFAULT: GRUB_CMDLINE_LINUX_DEFAULT = "quiet splash acpi_osi = Linux" Update grub with: sudo update-grub2

    Read the article

  • Unable to get screen signal after purge FGLRX

    - by Boris
    I thought that my ATI driver was not running well so I wanted to re-instal it completely. I did: sudo apt-get remove --purge fglrx* sudo apt-get remove --purge xserver-xorg-video-ati xserver-xorg-video-radeon and after a boot I wanted to intal the ATI driver BUT at the boot no more signal to my screen. Since, every time I turn on my PC it gets to purple screen and then screen shuts down ! Note that: Even if the screen is off, PC seems to be running almost well: I m still able to use my network to access data shared with NFS. Using live USB I have no screen problem. I tried to plug my screen on an alternative output but it did not work. I tried CTRL+ALT+F1 while being on purple screen but it does not do anything, screen shut down anyway. I m going to try the SHIFT thing and learn from blackscreen wiki...

    Read the article

  • Why does my Ubuntu freeze in the middle of something with a blank screen?

    - by mohamed
    I am facing a serious problem as my Dell Optiplex 745 loaded with Ubuntu 12.04 32bit freezes with a blank screen no mouse cursor no keyboard activity in many occasions. Sometimes when I open firefox, or software center, I really can't tell what the main problem is, but what i am certain about is it i have to do a hard reset to reboot. I tried to use a live-cd to boot but it did the same, tried the recovery console but couldn't find a way to fix from there (I am a new user) suspected a hardware problem but windows runs flawlessly so I believe its something related to ubuntu. Specs: Intel Celeron D 3.06 GHZ 3.0 GB ram Intel built in graphics Q965 1 TB HDD Bios Phoenex 2.6.4 Please help I really love ubuntu and I don't want to go back to windows!

    Read the article

  • Screen is very dim on an Acer Aspire 6920Z

    - by Justin
    I've been trying to figure this out for a week now, my laptops screen is on and working but you cannot see whats on the screen without shining a flashlight at it. I'm using a spare monitor by the VGA port right now to be able to use this laptop, which is kinda a pain. Been reading around a bit about this problem and it seems to be a common-ish problem it seems. I've tried to change the brightness which doesn't help whats so ever. It just happen one day after I turned off the laptop for the night. The screen flashes on for a bit at start up, then goes completely dim. Anyone with this problem and find a fix? You can search up this computers spec by the name/model in the title if you need hardware info. I never had this problem with the old Ubuntu 10.04.

    Read the article

  • monitor screen dead.....not even shows bios screen

    - by megatronous
    Re: /host/ubuntu/disks/root.disk does not exist :( ALERT! /host/ubuntu/disks/root.siak does not exist. Dropping to a shell! BusyBox v1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell (ash) (initramfs) alll thought the above problem was solved my issue now is..when i booted my pc again after this solving this to solve the above problem i had pressed e in the grub menu then corrected the partition then after starting i did sudo grub-update then i made some automatic update updates then in next reboot......my screen had gone blank .... and i am not even able to see bios screen....in the start ...the monitior just stays blank..................i have even tried disconnectiong my hard disk but still not able to get the display......solution required ....urgently.....

    Read the article

  • nvidia GT 525m no screen found

    - by Pavan
    I'm a Dell XPS user with nvidia GT 525M with Optimus. When I installed nvidia I was greeted with blank screen. And the error in nvidia log was "Fatal error : No screen found". So after searching for the solutions I figured that I have to insert "BusID" in xorg.conf file. After rebooting I was again greeted with blank screen with error "Fatal error : screen already occupied". I don't what exactly the problem is. Do I need to blacklist Intel inbuilt graphics to nvidia in my machine or anything else needs to be done? Please guide me.

    Read the article

  • Blank Screen After Ubuntu 12 installation

    - by Atul
    On my dell laptop, running with windows 7, I installed Ubuntu 12. I used it for sometime, then i re-started to switch to windows. First time it got boot up with windows but then it got hanged. I re-started again and then blank screen with blinking cursor came and beep sounds also started to came. I read in few forums and this seems like a common issue with Ubuntu. I tried using the bootable USB for both windows 7 and Ubuntu but none of these are even getting detected. Please let me know if any of know the work-around. Below is configuration" Machine: Dell Studio BIOS: Phoenix OS: Windows 7 Motherboard: Intel

    Read the article

  • How to totaly remove blank screen screensaver?

    - by Xamidovic
    I have no screensaver installed but when I watch movies after a while blank screen comes and I have to get up every time and move mouse to continue watching the movie. It really pisses me off. I found this command "gsettings set org.gnome.desktop.screensaver idle-activation-enabled false" which allegedly disables blank screen... I put that command in once, and blank screen keeps doing its crap. I did it again, blank screen still works on its own and would not stop. Did it trice, and nothing. Please someone help me with this, I'm freaking out when trying to watch a decent movie. I'd have to mention that I once had "xscreensaver" installed but I removed it after awhile. Don't know if it has something to do with blank screen still work, maybe some else would know. PLEASE HELP !

    Read the article

  • Unable to install 12.10 on asus r500v

    - by bmdr38
    I have been unable to get beyond the grub boot screen of the live dvd/usb. The Try Ubuntu without installing, Install Ubuntu, etc menu shows, and I have tried adding/replacing nomodeset and no splash with neither helping. Even "Check disc for defects" does not display anything when selected. I am at a complete loss as to how to fix this one. I have had many successful installs in the past, but this is definitely a first for me. Just as FYI, Gfx card: Geforce GT 635M I realize this particular card has Optimus on it, however even the alternative boot/command line install fails to load. Any help would be appreciated. I realize there have been multiple threads on this, but none of the methods within them have solved this yet. Thanks

    Read the article

  • Thinkpad W510 with default graphics drivers shows weird brightness issues

    - by Chantz
    Hey guys, I am currently running 10.10 - 32 bit on a new Thinkpad W510 with nVidia Quadro FX 880M graphics card. I am running with the default graphics drivers that installed with ubuntu install. My problem is that when I am logging in the screen acts normally as far as birghtness is concerned. I can increase/decrease brightness with Fn keys. But few seconds after I log in screen goes pitch dark. Hitting Fn+Home flickers the screen to all the way bright, then all the way dark. This behavior continues until I reach maximum brightness, in which case the screen stays all the way bright, for a few more seconds and then again goes dark if there is no activity & the cycle continues. Have you guys faced any of these issues? If so any pointers on how to resolve it. I am not alone, on ubuntu forum I saw another person having the same issue - link but no solution. Please help! UPDATE I followed the instructions that htorque mentions in his answer and it worked.

    Read the article

  • Ubuntu does not recognize my built-in monitor.

    - by B3tturTh3nU
    I've recently discovered of a boot problem Ubuntu has with my laptop. I have successfully installed Ubuntu on two other computers, and I've never experienced this problem. What happens is, after the live boot CD loads, the screen goes completely blank. Although, I suspected that there was no problem booting, so I loaded with BIOS only, which worked perfectly fine. Of course, not being very proficient with this, I have no idea what needs to be done to fix the problem. I have switchable graphics cards(the ATI Mobility Radeon HD 5650, and some low-end Intel card), and an Intel i5 quad core processor. I was booting with the Ubuntu 10.10 64 bit desktop distribution. If there's any more information you need from me, please let me know. EDIT: I was able to look into this a bit more, thanks to one of the comments provided, and I have some new information. Ubuntu does seem to be able to recognize both of my graphics cards. The problem I found was that, in the Xorg.0 log, it mentions that there were "no screens found." I'm using a notebook, so the screen is built in. Does anyone know of a way to get Ubuntu to recognize the monitor?

    Read the article

  • Blackscreen while installing 12.10

    - by Nalelvon
    everytime I try to install ubuntu 12.10 on my laptop i get a blackscreen after clicking on "install ubuntu", "try ubuntu without installation" or "ubuntu live" i tried it with nomodeset, nolapic and acpi=off too but nothing works. Sometimes i even get so a loading screen with nothing but "Ubuntu 12.10" and 4 dots in the middle, after that shortly a blackscreen appears with some text on it and then the complete blackscreen appears. As i tried with "no splash" instead of "quiet splash" it shows me something with graphic and determined in it but it was to fast away in a blackscreen to remember. Has someone any idea what I can do to get this working? Sry for my bad english i'm actually from germany. Sincerely Nalelvon

    Read the article

  • screen blacks out after pressing a key on keyboard, specially enter key

    - by ahmad598
    I have natty, and i have installed kubuntu-desktop package. before installing it, everything was fine but after that, this thing happens: when I'm typing, after stroking a key, screen blacks out, fan speeds up, and i have to turn off machine by pressing power button. it just happens in many different apps (chromium, hotot, kde proxy settings, ...) and in every environment: unity, kde, gnome 2. i don't know what details i must provide with this question, and i don't like to remove my kde desktop, or re-install my ubuntu. any ideas are appreciated ;-)

    Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >