Search Results

Search found 15160 results on 607 pages for 'boot disk'.

Page 14/607 | < Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >

• Grub can't find device on boot resulting in Grub Rescue

  - by user1160163

  So I have 2 hard drives a HDD 320GB and a SSD 20GB. Before I had Windows 7 on the HDD and Ubuntu on the SSD but wanted to get rid of windows and reinstall a clean Ubuntu on the SSD then use the HDD for storage. So I deleted everything from the HDD and set up the SSD with 18GB ext4 and 2GB Swap and installed Ubuntu on the 18GB ext4. Though now when I boot up I get "Error: No such device Grub Rescue" I have a live USB and I ran the Boot Repair following these instructions - grub rescue after install of Ubuntu 12.04 (dual boot) - it says successful though still have the same problem. This is the given URL from Boot Repair - http://paste.ubuntu.com/1257988/ Thanks for any help given.

  Read the article

• Cannot boot after installing ubuntu on lenovo x120e

  - by tutysara

  I have installed ubuntu 11.10 on my x120e using amd64 alternate iso image. The installation went fine, but it is having issues while booting after a successful installation, it says - "No Operating System Found". I followed the instruction at - help.ubuntu.com/community/X120e#Installation to purge grub-efi and installed grub-pc, even then I couldn't boot into ubuntu.(got the same "No Operating System Found") This is the file from boot-repair with this setup - http://pastebin.ubuntu.com/926556/ Then I asked in #ubuntu and they suggested me to create a bios-boot partition, I was not very comfortable with the solution they had suggested but gave it a try anyhow. I re-sized my initial partition and made 4 MB free space in the beginning of the partition and had set the flag bios_grub. Re-installed ubuntu 11.10 this time using amd64 desktop iso image file. Installation went fine as before but finally this time also the system didn't boot, it gave the same - "No Operating System Found" message. In BIOS I have the settings as to use both (Legacy and UEFI) and with UEFI tried first. This is the boot-repair file from my latest setup - http://pastebin.ubuntu.com/926761 Any help/suggestions are appreciated.

  Read the article

• Deleted info in Boot folder

  - by user207984

  First off, I'm using Zorin 7 OS. So my Boot folder was too full to install any new updates, I used a tutorial I found somewhere on here to remove the unneeded linux-image files, and must of also deleted the latest one as well. Now when I attempt to boot I get error: no such partition. grub rescue> I used my MultiSystem USB to install (on a separate partition) a different Linux OS (Kali) and no longer get that error, however, it will ONLY give me the option to boot Kali Linux. Here's the biggest new problem though, I used the built in option of hard drive encryption for Zorin 7 when I initially installed it, so now when I attempt to explore it (to get all my saved data which is REALLY important to me), it asks me for password for encryption. However, the password says it in not recognized, and I know it's right, I had to type it in every single day. So I either need a way to restore my Zorin 7 boot files or GRUB or whatever, so I can boot it up... or I need to know how to fix my encryption problem to save all my info.

  Read the article

• secure boot windows 8 issues it hates ubuntu :(

  - by Steven Brown

  im running into issues with windows 8. ok so i disabled secure boot from my laptop. i tell it to launch from my USB with ubuntu installed on it and it wont boot. just simply light my screen and darken it. iv google the fire out of this and no use so im asking for help. im useing ubuntu 13.04. more details: well i have tryed to boot another OS (zorin) and it hates it too. i dont know why my secure boot wont shut off. if it helps i have a HP 2000.

  Read the article

• UbuntuStudio 12.04 does not boot after install - no "intrd" image

  - by user72705

  After installing Ubuntu Studio 12.04 from DVD onto the fourth hard disk, it fails to boot, even when explicitly choosing the fourth hard disk as the boot device. I have SUSE 11.2 on the first 2 SCSI disks (which form a RAID) and Studio64 on the 1st IDE disk (that is, the third disk). Looking at the /boot directory on the Ubuntu partition, I see there is no initrd image. Editing the GRUB configuration file to include (hd3,1)/vmlinuz and of course (hd3,1)/initrd should fix the problem. But still GRUB gives a file not found error. This appears to me that, no mkintrd during the booting process (checked with LiveCD) runs like in OpenSUSE. How do I create the initrd to make Ubuntu bootable.

  Read the article

• Two Home and Boot partitions after installing Ubuntu 14.04 and Downgrading to Ubuntu 12.04

  - by Jatttt

  I have Ubuntu 12.04 LTS and I am experiencing some problems. I didn't have Ubuntu 12.04 on a drive to install it but I did have Ubuntu 14.04. So I installed it and downloaded Ubuntu 12.04 using Ubuntu 14. Now, I have 2 home partitions and 2 boot partitions. One home and boot is mounted at /media and the other one is /home and /boot. I cannot get rid of /media/HOME and /media/BOOT even using Gparted. How do I get remove them?

  Read the article

• unable to boot from live USB!

  - by ramblinman

  Linux noob here. I was messing around with my new dual-boot (win7 and the latest ubuntu, 12.04 I think?) Long story short, I deleted some partitions that I shouldn't have. When I boot up the machine, I get: error: no such partition. grub rescue _ I know that I could probably fix this by booting from the live USB. But I can't boot from the live USB either! On startup, I can get "boot from drive" options by pressing F12. (This is how I installed Ubuntu in the first place.) But when I select the USB drive, I get this error: error: no such device: [long string of letters and numbers]. grub rescue _ I've searched around for a fix but most threads addressing the first problem suggest booting from live drive. And I can't do that! Any help much appreciated.

  Read the article

• Windows 7 and Ubuntu Boot issue

  - by user115137

  I had the idea to dual boot Win 7 and Ubuntu and what I did was the following: Made a clean install of win 7 using all of my hard drive, next I used the Ubuntu live cd and gparted to partition my drive to be the following: /dev/sda1 ext4 20GB (Linux root) /dev/sda2 ntfs 100GB(Win7) /dev/sda3 ext4 350GB(Home) /dev/sda4 extended 4GB(swap) The thing is, when installing ubuntu I deleted the partition win 7 creates for its boot sector and recovery and then resized the drive to look like what I mentioned, and Ubuntu installed GRUB to the MBR. When GRUB boots I can see Ubuntu but not Windows, how can I chainload it? Or should I fix the windows mbr with the windows 7 installation disk and try to set the dual boot from there? I don't really care which one of the 2 bootloaders I end up using, I just want the dual boot to work out. Thanks

  Read the article

• Can't boot into 12.04, grub menu won't show

  - by Marcus

  I downloaded the Ubuntu 12.04 64bit and installed it on a 115GB partition next to a 15GB swap alongside Windows 7. I'm using a asus g73s. I have 2 drives: one with only Windows (500GB) and another with a partition for (250GB) Windows and (115GBb) the Ubuntu and (15GB) swap partitions. But after the installation, I can't find out how to run Ubuntu. It just run windows. I read that it should show a grub menu. I tried: Holding both Shift keys at boot up. Running the Ubuntu Live CD and edit the grub file. Also pressing the Esc and some function button during boot. Nothing seems to work. I solved my problem. I pressed Esc during boot and a boot menu opened and there i choosed option: P2 and than the grub menu showed.

  Read the article

• No Windows Option on Boot

  - by Okoning

  I've installed Ubuntu alongside Windows but at first didn't have a boot option menu. So, I installed bootrepair and ran it. This succeeded in granting me a GRUB boot option menu, but Windows isn't on it. Here is the bootrepair report: http://paste.ubuntu.com/8098527 Can anyone tell me what might be wrong? EDIT: I ran sudo fdisk -l and this is the output: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00023fe0 Device Boot Start End Blocks Id System /dev/sda1 * 2048 960096255 480047104 83 Linux /dev/sda2 960098302 976771071 8336385 5 Extended /dev/sda5 960098304 976771071 8336384 82 Linux swap / Solaris Disk /dev/sdb: 32.0 GB, 32015679488 bytes 255 heads, 63 sectors/track, 3892 cylinders, total 62530624 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 * 32 62530623 31265296 c W95 FAT32 (LBA)

  Read the article

• Why does Ubuntu 12.04 dual boot fail?

  - by Tranas

  Fresh install of XP followed by a fresh install of Ubuntu 12.04 results in the following error: error: unknown filesystem. grub rescue and the machine will not boot. Prior to the 12.04 install, XP worked fine. During the 12.04 install, all partitions and free space was visible, and the install seemed to complete without issues until the error message. Although I can fix the MBR via recovery console in XP and allow the machine to boot to windows, why is GRUB/Ubuntu trashing the boot sequence?

  Read the article

• Adding third disk as a single disk in a server with an existing RAID1

  - by slowhandsolo

  I've got a ProLiant DL360 G5 server (Fedora 13) with two SAS disks in a hardware RAID 1, working fine. Now I hot plugged another SAS disk. I'd like to configure this new hard disk out of my RAID, as a single non-RAID disk (ex. /dev/sdb). Even after rebooting the server, I can't see the new disk with "fdisk -l". It displays only my hardware RAID, but not the new disk. [root@myserver]# fdisk -l Disco /dev/cciss/c0d0: 300.0 GB, 299966445568 bytes Disposit. Inicio Comienzo Fin Bloques Id Sistema /dev/cciss/c0d0p1 * 1 126 512000 83 Linux /dev/cciss/c0d0p2 126 71798 292422656 8e Linux LVM Disco /dev/dm-0: 234.9 GB, 234881024000 bytes Disco /dev/dm-1: 10.5 GB, 10536091648 bytes Disco /dev/dm-2: 21.0 GB, 20971520000 bytes Disco /dev/dm-3: 31.5 GB, 31474057216 bytes Disco /dev/dm-4: 1577 MB, 1577058304 bytes However, I can see the new disk using the HP Array Configuration Utility CLI for Linux "hpacucli": [root@myserver]# hpacucli => controller slot=0 physicaldrive all show status physicaldrive 1I:1:1 (port 1I:box 1:bay 1, 300 GB): OK physicaldrive 1I:1:2 (port 1I:box 1:bay 2, 300 GB): OK physicaldrive 1I:1:3 (port 1I:box 1:bay 3, 300 GB): OK => controller slot=0 pd all show detail Smart Array P400i in Slot 0 (Embedded) array A physicaldrive 1I:1:1 Port: 1I Box: 1 Bay: 1 physicaldrive 1I:1:2 Port: 1I Box: 1 Bay: 2 **unassigned** physicaldrive 1I:1:3 Port: 1I Box: 1 Bay: 3 Status: OK Drive Type: **Unassigned Drive** As you can see, I've got two SAS disks in a RAID 1 and the new disk as "unassigned". Is there any way to work with the new disk as another non-RAID single disk? If relevant, I want to create a new partition in my new disk, format it with mkfs and mount it, but as I can't see it with fdisk, I don't know how to do it. Thanks!

  Read the article

• Fresh install on SSD with Ubuntu and Windows Vista, using whole disk encryption for Ubuntu

  - by nategator

  I would like to do a fresh install on a OCZ Vertex Plus R2 SSD 60GB drive I purchased on the cheap. Since the AES-encryption looks like it may not work optimally for this drive, I would like to set up a dual-boot to Windows Vista (the only Windows copy I have for clean install purposes) and Ubuntu 12.04 with the best encryption scheme possible. My plan is to have Windows around just in case I need to use a program that won't work with Wine and Ubuntu as my daily OS with all of my information secured in case the laptop is ever stolen or sold. Although this setup will not provide a lot of space, I think I can squeeze both OSes and have enough for second-computer office tasks. So, my questions are: Which OS should I install first, Ubuntu or Vista? Any special considerations when partitioning the drive? How should I install Ubuntu to ensure full disk encryption for the Linux partition(s) and or my daily computing? Is there a significant performance upgrade with doing a solo install of Ubuntu instead of a dual boot setup? Will TRIM, for example, work correctly? Are there any significant security concerns with going the route of a dual-boot, other than the fact that any activity on Windows may be fully recoverable if the drive is stolen or sold? Thanks in advance!

  Read the article

• Dual booting 12.10 and Win 7 - boots directly to Win 7

  - by user110174

  and thank you kindly for you help! I'll preface this with saying that I realize this is a common problem, with lots of trouble-shooting guides available online; however, after multiple attempts with different guides, I've made zero progress and am hoping to someone could help me with my specific scenario. First, my story: -Initially, I installed Ubuntu 12.10 with the "Something Else" option with no problems. Used 4 GB Swap Logical Partition, 26 GB Primary Root Partition. Wanting to trying out Mint 13, I booted into Windows from GRUB2, used the latest version of EasyBCD (v2.2) to restore the Windows 7 bootloader to the MBR, deleted the Ubuntu partitions, reformatted them in NTFS. I then created a 30 GB partition of free space for Mint. I installed Mint using the same partitioning described above for Ubuntu 12.10, using /dev/sda for the boot installation files, and everything seemed to go well, until I re-booted my computer and it went straight to Windows - I could find no way to get into Mint. So I went into windows, restored windows bootloader to the MBR w/ EasyBCD, deleted partitions, etc., as I figured I'd done enough messing around and would go with Ubuntu 12.10. Now the problem: I restarted my computer booting from the same Ubuntu USB key I originally used. Briefly, "error: "prefix" is not set" flashed on screen, and instead of being greeted with the GUI menu of "try vs. install Ubuntu", there was a menu with minimal graphics (like a BIOS menu) where I could select install, run from USB, etc. After selecting "Install Ubuntu", the familiar install wizard with a GUI came up, I partitioned my drive as described, /dev/sda for the boot installation files, install went well, rebooted and...straight to Windows. This is where I'm at. Fixes I've tried: -This guide: How can I repair grub? (How to get Ubuntu back after installing Windows?) to ensure Grub is on the MBR. I followed all steps, but still when I reboot, I go directly into Windows. -Installing 12.04 instead of 12.10 - same issue -Re-installed Ubuntu, writing the boot files to their own partition, then using EasyBCD to to add a boot option for Ubuntu using the Windows bootloader, ensuring I instruct EasyBCD to look at the partition I created with the Ubuntu installer (instructions here http://neosmart.net/wiki/display/EBCD/Ubuntu). When I reboot, I select the Ubuntu option, and it puts me in GRUB4DOS, with a cursor waiting for input. I have no idea what to put here, so I would just type "reboot" to exit out. And this is where I am now. Any clue as to why I can't boot into Ubuntu? My computer specs are: ASUS UX31A Core i7, Win 7 64 Pro, 256 GB SSD, Intel HM76 Chipset and Integrated Intel HD 4000 Graphics, 4 GB memory I've tried to be as clear as possible, but I'd be happy to provide any info that would help anyone along. Thanks for your patience in reading this! Sincerely, -MN

  Read the article

• Can I safely delete the Ubuntu 12.04 partition and use the unallocated space for my Elementary OS?

  - by d4ryl3

  I have this setup: I've decided to switch to Elementary OS Luna (fork of Ubuntu 12.04) as my main Linux distro. Now I need to delete my Ubuntu partition so I could add capacity to my eOS which only has 10Gb. Currently my eOS is in /dev/sda9, and Ubuntu in /dev/sda8/. I forgot where my bootloader is installed, so I ran bootinfoscript, which returned this: `============================= Boot Info Summary: =============================== = Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks in partition 94 for . sda1: __________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /bootmgr /Boot/BCD sda2: __________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe sda3: __________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /bootmgr /boot/bcd sda4: __________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sda5: __________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: According to the info in the boot sector, sda5 starts at sector 2048. Operating System: Boot files: sda6: __________________________________________ File system: swap Boot sector type: - Boot sector info: sda7: __________________________________________ File system: ext4 Boot sector type: Grub2 (v1.99) Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda7 and looks at sector 851823520 of the same hard drive for core.img, but core.img can not be found at this location. Operating System: Boot files: /grub/grub.cfg /extlinux/extlinux.conf sda8: __________________________________________ File system: ext4 Boot sector type: Grub2 (v1.99) Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda8 and looks at sector 860224256 of the same hard drive for core.img. core.img is at this location and looks for (,msdos9)/boot/grub on this drive. Operating System: Ubuntu 13.04 Boot files: /etc/fstab sda9: __________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: elementary OS Luna Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img` I need advice as to how to proceed. I mean, could I simply delete /dev/sda7/ and /dev/sda8/? Please help, thank you.

  Read the article

• Setting Boot and Mirror Disks correctly at the Solaris OBP

  - by Shaun Dewberry

  I am recovering a domain that was lost due to power outage on an Sun Fire E25K server. I know how to set the appropriate parameters at the openboot prompt using nvalias/devalias, boot etc. However, I do not understand how one gets from the output of show-disks {1a0} ok show-disks a) /pci@1dd,600000/SUNW,qlc@1/fp@0,0/disk b) /pci@1dd,700000/SUNW,qlc@1/fp@0,0/disk c) /pci@1dc,700000/pci@1/pci@1/scsi@2,1/disk d) /pci@1dc,700000/pci@1/pci@1/scsi@2/disk e) /pci@1bd,600000/SUNW,qlc@1/fp@0,0/disk f) /pci@1bd,700000/SUNW,qlc@1/fp@0,0/disk g) /pci@1bc,700000/pci@1/pci@1/scsi@2,1/disk h) /pci@1bc,700000/pci@1/pci@1/scsi@2/disk q) NO SELECTION Enter Selection, q to quit: to the correct full disk path. I know it is basically one of the pci/scsi paths listed above, but in all instruction or examples a string of additional characters is appended to the path to specify Targets and Units but the explanation of the path construction is never given. Could someone please explain how to construct this disk path correctly?

  Read the article

• How to mount a blu-ray drive?

  - by Stephan Schielke

  Maybe it is for the best to close this question. This has nothing to do with a bluray drive in general anymore. Probably a hardware defect. I will try to test it with a windows system and different cables again... Thx so far. I have a bluray/dvd/cdrom drive with SATA. Ubuntu wont find it under /dev/sd wodim --devices wodim: Overview of accessible drives (1 found) : ------------------------------------------------------------------------- 0 dev='/dev/sg2' rwrw-- : 'HL-DT-ST' 'BDDVDRW CH08LS10' ------------------------------------------------------------------------- cdrecord -scanbus scsibus2: 2,0,0 200) 'HL-DT-ST' 'BDDVDRW CH08LS10' '2.00' Removable CD-ROM fdisk dont even lists it. Ubuntu only automounts blank DVDs, but neither CDROM nor Blurays. I also changed the sata slot, sata cable and the power cable. The drive works with a windows system. This happens when I try to mount: sudo mount -t auto /dev/scd0 /media/bluray mount: you must specify the filesystem type I tried all filesystems there are. I also installed makemkv. It finds the drive but not the disc. Here is my /dev ls -al /dev total 12 drwxr-xr-x 17 root root 4420 2011-11-25 19:36 . drwxr-xr-x 28 root root 4096 2011-11-25 07:12 .. crw------- 1 root root 10, 235 2011-11-25 19:28 autofs -rw-r--r-- 1 root root 630 2011-11-25 19:28 .blkid.tab -rw-r--r-- 1 root root 630 2011-11-25 19:28 .blkid.tab.old drwxr-xr-x 2 root root 700 2011-11-25 19:27 block drwxr-xr-x 2 root root 100 2011-11-25 19:27 bsg crw------- 1 root root 10, 234 2011-11-25 19:28 btrfs-control drwxr-xr-x 3 root root 60 2011-11-25 19:27 bus drwxr-xr-x 2 root root 3820 2011-11-25 19:28 char crw------- 1 root root 5, 1 2011-11-25 19:28 console lrwxrwxrwx 1 root root 11 2011-11-25 19:28 core -> /proc/kcore drwxr-xr-x 2 root root 60 2011-11-25 19:28 cpu crw------- 1 root root 10, 60 2011-11-25 19:28 cpu_dma_latency drwxr-xr-x 7 root root 140 2011-11-25 19:27 disk crw------- 1 root root 10, 61 2011-11-25 19:28 ecryptfs crw-rw---- 1 root video 29, 0 2011-11-25 19:28 fb0 lrwxrwxrwx 1 root root 13 2011-11-25 19:28 fd -> /proc/self/fd crw-rw-rw- 1 root root 1, 7 2011-11-25 19:28 full crw-rw-rw- 1 root fuse 10, 229 2011-11-25 19:28 fuse crw------- 1 root root 251, 0 2011-11-25 19:28 hidraw0 crw------- 1 root root 251, 1 2011-11-25 19:28 hidraw1 crw------- 1 root root 10, 228 2011-11-25 19:28 hpet lrwxrwxrwx 1 root root 14 2011-11-25 19:27 .initramfs -> /run/initramfs drwxr-xr-x 4 root root 220 2011-11-25 19:28 input crw------- 1 root root 1, 11 2011-11-25 19:28 kmsg srw-rw-rw- 1 root root 0 2011-11-25 19:28 log brw-rw---- 1 root disk 7, 0 2011-11-25 19:28 loop0 brw-rw---- 1 root disk 7, 1 2011-11-25 19:28 loop1 brw-rw---- 1 root disk 7, 2 2011-11-25 19:28 loop2 brw-rw---- 1 root disk 7, 3 2011-11-25 19:28 loop3 brw-rw---- 1 root disk 7, 4 2011-11-25 19:28 loop4 brw-rw---- 1 root disk 7, 5 2011-11-25 19:28 loop5 brw-rw---- 1 root disk 7, 6 2011-11-25 19:28 loop6 brw-rw---- 1 root disk 7, 7 2011-11-25 19:28 loop7 drwxr-xr-x 2 root root 60 2011-11-25 19:27 mapper crw------- 1 root root 10, 227 2011-11-25 19:28 mcelog crw-r----- 1 root kmem 1, 1 2011-11-25 19:28 mem drwxr-xr-x 2 root root 60 2011-11-25 19:27 net crw------- 1 root root 10, 59 2011-11-25 19:28 network_latency crw------- 1 root root 10, 58 2011-11-25 19:28 network_throughput crw-rw-rw- 1 root root 1, 3 2011-11-25 19:28 null crw-rw-rw- 1 root root 195, 0 2011-11-25 19:28 nvidia0 crw-rw-rw- 1 root root 195, 255 2011-11-25 19:28 nvidiactl crw------- 1 root root 1, 12 2011-11-25 19:28 oldmem crw-r----- 1 root kmem 1, 4 2011-11-25 19:28 port crw------- 1 root root 108, 0 2011-11-25 19:28 ppp crw------- 1 root root 10, 1 2011-11-25 19:28 psaux crw-rw-rw- 1 root tty 5, 2 2011-11-25 20:00 ptmx drwxr-xr-x 2 root root 0 2011-11-25 19:27 pts brw-rw---- 1 root disk 1, 0 2011-11-25 19:28 ram0 brw-rw---- 1 root disk 1, 1 2011-11-25 19:28 ram1 brw-rw---- 1 root disk 1, 10 2011-11-25 19:28 ram10 brw-rw---- 1 root disk 1, 11 2011-11-25 19:28 ram11 brw-rw---- 1 root disk 1, 12 2011-11-25 19:28 ram12 brw-rw---- 1 root disk 1, 13 2011-11-25 19:28 ram13 brw-rw---- 1 root disk 1, 14 2011-11-25 19:28 ram14 brw-rw---- 1 root disk 1, 15 2011-11-25 19:28 ram15 brw-rw---- 1 root disk 1, 2 2011-11-25 19:28 ram2 brw-rw---- 1 root disk 1, 3 2011-11-25 19:28 ram3 brw-rw---- 1 root disk 1, 4 2011-11-25 19:28 ram4 brw-rw---- 1 root disk 1, 5 2011-11-25 19:28 ram5 brw-rw---- 1 root disk 1, 6 2011-11-25 19:28 ram6 brw-rw---- 1 root disk 1, 7 2011-11-25 19:28 ram7 brw-rw---- 1 root disk 1, 8 2011-11-25 19:28 ram8 brw-rw---- 1 root disk 1, 9 2011-11-25 19:28 ram9 crw-rw-rw- 1 root root 1, 8 2011-11-25 19:28 random crw-rw-r--+ 1 root root 10, 62 2011-11-25 19:28 rfkill lrwxrwxrwx 1 root root 4 2011-11-25 19:28 rtc -> rtc0 crw------- 1 root root 254, 0 2011-11-25 19:28 rtc0 lrwxrwxrwx 1 root root 3 2011-11-25 19:38 scd0 -> sr0 brw-rw---- 1 root disk 8, 0 2011-11-25 19:28 sda brw-rw---- 1 root disk 8, 1 2011-11-25 19:28 sda1 brw-rw---- 1 root disk 8, 2 2011-11-25 19:28 sda2 brw-rw---- 1 root disk 8, 3 2011-11-25 19:28 sda3 brw-rw---- 1 root disk 8, 5 2011-11-25 19:28 sda5 brw-rw---- 1 root disk 8, 6 2011-11-25 19:28 sda6 brw-rw---- 1 root disk 8, 16 2011-11-25 19:28 sdb brw-rw---- 1 root disk 8, 17 2011-11-25 19:28 sdb1 crw-rw---- 1 root disk 21, 0 2011-11-25 19:28 sg0 crw-rw---- 1 root disk 21, 1 2011-11-25 19:28 sg1 crw-rw----+ 1 root cdrom 21, 2 2011-11-25 19:28 sg2 lrwxrwxrwx 1 root root 8 2011-11-25 19:28 shm -> /run/shm crw------- 1 root root 10, 231 2011-11-25 19:28 snapshot drwxr-xr-x 4 root root 280 2011-11-25 19:28 snd brw-rw----+ 1 root cdrom 11, 0 2011-11-25 19:38 sr0 lrwxrwxrwx 1 root root 15 2011-11-25 19:28 stderr -> /proc/self/fd/2 lrwxrwxrwx 1 root root 15 2011-11-25 19:28 stdin -> /proc/self/fd/0 lrwxrwxrwx 1 root root 15 2011-11-25 19:28 stdout -> /proc/self/fd/1 crw-rw-rw- 1 root tty 5, 0 2011-11-25 19:35 tty crw--w---- 1 root tty 4, 0 2011-11-25 19:28 tty0 crw------- 1 root root 4, 1 2011-11-25 19:28 tty1 crw--w---- 1 root tty 4, 10 2011-11-25 19:28 tty10 crw--w---- 1 root tty 4, 11 2011-11-25 19:28 tty11 crw--w---- 1 root tty 4, 12 2011-11-25 19:28 tty12 crw--w---- 1 root tty 4, 13 2011-11-25 19:28 tty13 crw--w---- 1 root tty 4, 14 2011-11-25 19:28 tty14 crw--w---- 1 root tty 4, 15 2011-11-25 19:28 tty15 crw--w---- 1 root tty 4, 16 2011-11-25 19:28 tty16 crw--w---- 1 root tty 4, 17 2011-11-25 19:28 tty17 crw--w---- 1 root tty 4, 18 2011-11-25 19:28 tty18 crw--w---- 1 root tty 4, 19 2011-11-25 19:28 tty19 crw------- 1 root root 4, 2 2011-11-25 19:28 tty2 crw--w---- 1 root tty 4, 20 2011-11-25 19:28 tty20 crw--w---- 1 root tty 4, 21 2011-11-25 19:28 tty21 crw--w---- 1 root tty 4, 22 2011-11-25 19:28 tty22 crw--w---- 1 root tty 4, 23 2011-11-25 19:28 tty23 crw--w---- 1 root tty 4, 24 2011-11-25 19:28 tty24 crw--w---- 1 root tty 4, 25 2011-11-25 19:28 tty25 crw--w---- 1 root tty 4, 26 2011-11-25 19:28 tty26 crw--w---- 1 root tty 4, 27 2011-11-25 19:28 tty27 crw--w---- 1 root tty 4, 28 2011-11-25 19:28 tty28 crw--w---- 1 root tty 4, 29 2011-11-25 19:28 tty29 crw------- 1 root root 4, 3 2011-11-25 19:28 tty3 crw--w---- 1 root tty 4, 30 2011-11-25 19:28 tty30 crw--w---- 1 root tty 4, 31 2011-11-25 19:28 tty31 crw--w---- 1 root tty 4, 32 2011-11-25 19:28 tty32 crw--w---- 1 root tty 4, 33 2011-11-25 19:28 tty33 crw--w---- 1 root tty 4, 34 2011-11-25 19:28 tty34 crw--w---- 1 root tty 4, 35 2011-11-25 19:28 tty35 crw--w---- 1 root tty 4, 36 2011-11-25 19:28 tty36 crw--w---- 1 root tty 4, 37 2011-11-25 19:28 tty37 crw--w---- 1 root tty 4, 38 2011-11-25 19:28 tty38 crw--w---- 1 root tty 4, 39 2011-11-25 19:28 tty39 crw------- 1 root root 4, 4 2011-11-25 19:28 tty4 crw--w---- 1 root tty 4, 40 2011-11-25 19:28 tty40 crw--w---- 1 root tty 4, 41 2011-11-25 19:28 tty41 crw--w---- 1 root tty 4, 42 2011-11-25 19:28 tty42 crw--w---- 1 root tty 4, 43 2011-11-25 19:28 tty43 crw--w---- 1 root tty 4, 44 2011-11-25 19:28 tty44 crw--w---- 1 root tty 4, 45 2011-11-25 19:28 tty45 crw--w---- 1 root tty 4, 46 2011-11-25 19:28 tty46 crw--w---- 1 root tty 4, 47 2011-11-25 19:28 tty47 crw--w---- 1 root tty 4, 48 2011-11-25 19:28 tty48 crw--w---- 1 root tty 4, 49 2011-11-25 19:28 tty49 crw------- 1 root root 4, 5 2011-11-25 19:28 tty5 crw--w---- 1 root tty 4, 50 2011-11-25 19:28 tty50 crw--w---- 1 root tty 4, 51 2011-11-25 19:28 tty51 crw--w---- 1 root tty 4, 52 2011-11-25 19:28 tty52 crw--w---- 1 root tty 4, 53 2011-11-25 19:28 tty53 crw--w---- 1 root tty 4, 54 2011-11-25 19:28 tty54 crw--w---- 1 root tty 4, 55 2011-11-25 19:28 tty55 crw--w---- 1 root tty 4, 56 2011-11-25 19:28 tty56 crw--w---- 1 root tty 4, 57 2011-11-25 19:28 tty57 crw--w---- 1 root tty 4, 58 2011-11-25 19:28 tty58 crw--w---- 1 root tty 4, 59 2011-11-25 19:28 tty59 crw------- 1 root root 4, 6 2011-11-25 19:28 tty6 crw--w---- 1 root tty 4, 60 2011-11-25 19:28 tty60 crw--w---- 1 root tty 4, 61 2011-11-25 19:28 tty61 crw--w---- 1 root tty 4, 62 2011-11-25 19:28 tty62 crw--w---- 1 root tty 4, 63 2011-11-25 19:28 tty63 crw--w---- 1 root tty 4, 7 2011-11-25 19:28 tty7 crw--w---- 1 root tty 4, 8 2011-11-25 19:28 tty8 crw--w---- 1 root tty 4, 9 2011-11-25 19:28 tty9 crw------- 1 root root 5, 3 2011-11-25 19:28 ttyprintk crw-rw---- 1 root dialout 4, 64 2011-11-25 19:28 ttyS0 crw-rw---- 1 root dialout 4, 65 2011-11-25 19:28 ttyS1 crw-rw---- 1 root dialout 4, 74 2011-11-25 19:28 ttyS10 crw-rw---- 1 root dialout 4, 75 2011-11-25 19:28 ttyS11 crw-rw---- 1 root dialout 4, 76 2011-11-25 19:28 ttyS12 crw-rw---- 1 root dialout 4, 77 2011-11-25 19:28 ttyS13 crw-rw---- 1 root dialout 4, 78 2011-11-25 19:28 ttyS14 crw-rw---- 1 root dialout 4, 79 2011-11-25 19:28 ttyS15 crw-rw---- 1 root dialout 4, 80 2011-11-25 19:28 ttyS16 crw-rw---- 1 root dialout 4, 81 2011-11-25 19:28 ttyS17 crw-rw---- 1 root dialout 4, 82 2011-11-25 19:28 ttyS18 crw-rw---- 1 root dialout 4, 83 2011-11-25 19:28 ttyS19 crw-rw---- 1 root dialout 4, 66 2011-11-25 19:28 ttyS2 crw-rw---- 1 root dialout 4, 84 2011-11-25 19:28 ttyS20 crw-rw---- 1 root dialout 4, 85 2011-11-25 19:28 ttyS21 crw-rw---- 1 root dialout 4, 86 2011-11-25 19:28 ttyS22 crw-rw---- 1 root dialout 4, 87 2011-11-25 19:28 ttyS23 crw-rw---- 1 root dialout 4, 88 2011-11-25 19:28 ttyS24 crw-rw---- 1 root dialout 4, 89 2011-11-25 19:28 ttyS25 crw-rw---- 1 root dialout 4, 90 2011-11-25 19:28 ttyS26 crw-rw---- 1 root dialout 4, 91 2011-11-25 19:28 ttyS27 crw-rw---- 1 root dialout 4, 92 2011-11-25 19:28 ttyS28 crw-rw---- 1 root dialout 4, 93 2011-11-25 19:28 ttyS29 crw-rw---- 1 root dialout 4, 67 2011-11-25 19:28 ttyS3 crw-rw---- 1 root dialout 4, 94 2011-11-25 19:28 ttyS30 crw-rw---- 1 root dialout 4, 95 2011-11-25 19:28 ttyS31 crw-rw---- 1 root dialout 4, 68 2011-11-25 19:28 ttyS4 crw-rw---- 1 root dialout 4, 69 2011-11-25 19:28 ttyS5 crw-rw---- 1 root dialout 4, 70 2011-11-25 19:28 ttyS6 crw-rw---- 1 root dialout 4, 71 2011-11-25 19:28 ttyS7 crw-rw---- 1 root dialout 4, 72 2011-11-25 19:28 ttyS8 crw-rw---- 1 root dialout 4, 73 2011-11-25 19:28 ttyS9 d rwxr-xr-x 3 root root 60 2011-11-25 19:28 .udev crw-r----- 1 root root 10, 223 2011-11-25 19:28 uinput crw-rw-rw- 1 root root 1, 9 2011-11-25 19:28 urandom drwxr-xr-x 2 root root 60 2011-11-25 19:27 usb crw------- 1 root root 252, 0 2011-11-25 19:28 usbmon0 crw------- 1 root root 252, 1 2011-11-25 19:28 usbmon1 crw------- 1 root root 252, 2 2011-11-25 19:28 usbmon2 crw------- 1 root root 252, 3 2011-11-25 19:28 usbmon3 crw------- 1 root root 252, 4 2011-11-25 19:28 usbmon4 crw------- 1 root root 252, 5 2011-11-25 19:28 usbmon5 crw------- 1 root root 252, 6 2011-11-25 19:28 usbmon6 crw------- 1 root root 252, 7 2011-11-25 19:28 usbmon7 crw------- 1 root root 252, 8 2011-11-25 19:28 usbmon8 drwxr-xr-x 4 root root 80 2011-11-25 19:28 v4l crw------- 1 root root 10, 57 2011-11-25 19:28 vboxdrv crw------- 1 root root 10, 56 2011-11-25 19:28 vboxnetctl drwxr-x--- 4 root vboxusers 80 2011-11-25 19:28 vboxusb crw-rw---- 1 root tty 7, 0 2011-11-25 19:28 vcs crw-rw---- 1 root tty 7, 1 2011-11-25 19:28 vcs1 crw-rw---- 1 root tty 7, 2 2011-11-25 19:28 vcs2 crw-rw---- 1 root tty 7, 3 2011-11-25 19:28 vcs3 crw-rw---- 1 root tty 7, 4 2011-11-25 19:28 vcs4 crw-rw---- 1 root tty 7, 5 2011-11-25 19:28 vcs5 crw-rw---- 1 root tty 7, 6 2011-11-25 19:28 vcs6 crw-rw---- 1 root tty 7, 128 2011-11-25 19:28 vcsa crw-rw---- 1 root tty 7, 129 2011-11-25 19:28 vcsa1 crw-rw---- 1 root tty 7, 130 2011-11-25 19:28 vcsa2 crw-rw---- 1 root tty 7, 131 2011-11-25 19:28 vcsa3 crw-rw---- 1 root tty 7, 132 2011-11-25 19:28 vcsa4 crw-rw---- 1 root tty 7, 133 2011-11-25 19:28 vcsa5 crw-rw---- 1 root tty 7, 134 2011-11-25 19:28 vcsa6 crw------- 1 root root 10, 63 2011-11-25 19:28 vga_arbiter crw-rw----+ 1 root video 81, 0 2011-11-25 19:28 video0 crw-rw-rw- 1 root root 1, 5 2011-11-25 19:28 zero sg_scan -i gives me: sudo sg_scan -i /dev/sg0: scsi0 channel=0 id=0 lun=0 [em] ATA ST31000524NS SN12 [rmb=0 cmdq=0 pqual=0 pdev=0x0] /dev/sg1: scsi0 channel=0 id=1 lun=0 [em] ATA WDC WD15EADS-00S 01.0 [rmb=0 cmdq=0 pqual=0 pdev=0x0] /dev/sg2: scsi2 channel=0 id=0 lun=0 [em] HL-DT-ST BDDVDRW CH08LS10 2.00 [rmb=1 cmdq=0 pqual=0 pdev=0x5] sg_map gives me: /dev/sg0 /dev/sda /dev/sg1 /dev/sdb /dev/sg2 /dev/scd0 lsscsi -l gives me: [0:0:0:0] disk ATA ST31000524NS SN12 /dev/sda state=running queue_depth=1 scsi_level=6 type=0 device_blocked=0 timeout=30 [0:0:1:0] disk ATA WDC WD15EADS-00S 01.0 /dev/sdb state=running queue_depth=1 scsi_level=6 type=0 device_blocked=0 timeout=30 [2:0:0:0] cd/dvd HL-DT-ST BDDVDRW CH08LS10 2.00 /dev/sr0 state=running queue_depth=1 scsi_level=6 type=5 device_blocked=0 timeout=30 my udf mod is: filename: /lib/modules/3.0.0-14-generic/kernel/fs/udf/udf.ko license: GPL description: Universal Disk Format Filesystem author: Ben Fennema srcversion: 6ABDE012374D96B9685B8E5 depends: crc-itu-t vermagic: 3.0.0-14-generic SMP mod_unload modversions Do I need special drivers or mods enabled? Do I need to change some BIOS settings? edit: Somehow I am now able to fire the mount command without any filesystem errors, but now I get: mount: no medium found on /dev/sr0

  Read the article

• Grub doesn't show both Ubuntu installations

  - by jackweirdy

  I have a laptop with Ubuntu 12.04 LTS installed as the main OS. The other day I installed Ubuntu-Studio (version 12.04) into another partition on the machine. The installation went great and when the machine booted, the grub menu popped up and I could see the option for Ubuntu Studio and the vanilla Ubuntu OS'. The problem was that this version of grub, installed by the Studio installer, didn't look great and insisted on putting Studio at the top of the list, and therefore as the main OS to boot. I use the standard Ubuntu more often, so I booted into that and ran sudo grub-install dev/sda. That worked OK and now Ubuntu boots as normal. Only problem is that the Grub menu doesn't show up and doesn't give me a chance to choose the other OS. Running sudo os-prober shows that it can find ubuntu studio, it doesn't give me a chance to boot it. Any ideas as to how I can fix this problem? Cheers in advance. EDIT: followed instructions here and saw the boot menu, but the only boot options present were for the standard installation of Ubuntu.

  Read the article

• Why is my disk full?

  - by Agmenor

  I installed Ubuntu 12.04 by doing a fresh install where there was previously Ubuntu 11.10. My computer warns me now that my disk is nearly full. After having run apt-get purge, run apt-get autoremove and emptied the Trash can, I still have this problem as shown by this screenshot of Gparted: The disk /dev/sda7 is indeed full. I ran the Disk Usage Analyzer (Baobab) and I am still not sure of what is happening: One of my hypothesis is that when installing Ubuntu 12.04, I didn't configure my disks well and the disk /dev/sda6 is not mounted well as /home. Is this the reason indeed? What should I do to verify this and then to get the things fixed? Here are a few additional details to answer the questions I received (thank you everybody): My home directory is not encrypted. The Backup utility (Déjà Dup) is not set for automatic backups. (I do it myself and manually.) After I mount /dev/sda6, the command df -h gives Filesystem Size Used Avail Use% Mounted on /dev/sda7 244G 221G 12G 96% / udev 3,9G 4,0K 3,9G 1% /dev tmpfs 1,6G 904K 1,6G 1% /run none 5,0M 0 5,0M 0% /run/lock none 3,9G 164K 3,9G 1% /run/shm /dev/sda6 653G 189G 433G 31% /media/8ec2fa69-039b-4c52-ab1b-034d785132a1 (sorry but formatting this into code does not work, for an unknown reason) Thanks to izx's post, I realized /dev/sda6 was not even mounted before. It contains all the documents I used to have when I was running Ubuntu 11.10.

  Read the article

• How can I automatically boot to my new Windows 7 installation?

  - by Walkerneo

  When I bought a new computer, I reinstalled windows on the larger hard drive it came with, but kept the old hard drive as well. I'm keeping the old Windows installation on the hard drive in case I need saved passwords or other data only accessible after signing in. On the boot screen, it gives me the option to boot into the installation I'm currently using, or the "recovered" installation. Attempting to boot into the second one fails anyway. Is there a way I can automatically boot into this installation while still maintaining the possibility of booting into the old installation?

  Read the article

• Access Windows Boot Manager selector when timeout is set to 0?

  - by Kyle Cronin

  I've installed Wubi onto a Windows Vista computer. I've also set the boot timeout to 0: bcdedit /timeout 0 However, now I can't figure out how to get the menu to come up at all! I read on the internets that I had to hold F8 or space when starting up, but they doesn't seem to do anything. Is there a different key or setting I've overlooked? The computer itself is a Dell that's a few months old. The keyboard is USB, but I don't think that's the problem as I can get into the BIOS just fine. Maybe I'm doing it wrong? Am I supposed to hold the keys or rapidly tap them (I've tried both)? If it helps, here's the output from bcdedit: C:\Windows\system32>bcdedit Windows Boot Manager -------------------- identifier {bootmgr} device partition=C: description Windows Boot Manager locale en-US inherit {globalsettings} default {current} resumeobject {5460d9d2-d391-11dc-9d9f-aba67a8797c5} displayorder {current} {e2484fe7-5e97-11de-84d4-0024e8074422} toolsdisplayorder {memdiag} timeout 0 resume No Windows Boot Loader ------------------- identifier {current} device partition=C: path \Windows\system32\winload.exe description Windows Vista locale en-US inherit {bootloadersettings} recoverysequence {572bcd55-ffa7-11d9-aae0-0007e994107d} recoveryenabled Yes osdevice partition=C: systemroot \Windows resumeobject {5460d9d2-d391-11dc-9d9f-aba67a8797c5} nx OptIn Real-mode Boot Sector --------------------- identifier {e2484fe7-5e97-11de-84d4-0024e8074422} device partition=C: path \ubuntu\winboot\wubildr.mbr description Ubuntu

  Read the article

• Boot Camp: is it possible to restart directly to Windows from Mac OS X?

  - by Jonik

  With the Boot Camp tools installed on Windows, there's an option for rebooting directly to Mac OS ("Restart in Mac OS X" from Boot Camp system tray item). But is this possible in the opposite direction? In other words, instead of the procedure 1) "Restart", 2) wait for OS X to shut down, 3) hold Option key (?), and 4) select the Windows partition, can I tell my Mac to restart so that Windows is selected on the next boot? Something like "Restart in Windows" which would let me bypass steps 2-4. NB: I want to keep Mac OS X as the default OS; I'm just looking for a convenient shortcut when normally running OS X and occasionally wanting to boot to Windows.

  Read the article

• Low disk space: home/user folder occupies 94GB

  - by tedtoy

  I am low on disk space and when I check the Disk Usage analyzer (using gksudo baobab) it indicates that my home/teddy folder is using 94GB, but when I browse through its contents I can only account for about 1gb of that usage. I've tried sudo apt-get clean and deleting the cached package files from Synaptic Package Manager, emptied trash but that has not changed the amount of free space I have. It seems similar to this problem But using the root disk usage analyzer has not given any insight into what is consuming so much space. Any ideas?

  Read the article

• How to fix the boot loader with an installation disk at hand

  - by Bragboy

  Hi, I recently messed up my Master Boot Record and my system is not booting. I was dual booting Windows and Ubuntu. Both of them are not loading now. I don't care if I lose my windows, but I want my Ubuntu back!! How to get it (I have a fresh Ubuntu 10.10 LTS disk with me). I went through the install wizard but feared that I may loose my existing installation/setup. Thats why I came here to check what is the ideal procedure to only update the Boot record instead of a full installation.

  Read the article

• Out Of disk, but still boots

  - by LinuxPCplus

  I have a HP Compaq nx6310 notebook wth 4gb memory & a new 250gb hdd. After installing Ubuntu 12.04, i got an "out of disk" error & was unable to boot. I rebooted in live, instaled & ran Boot Repair then rebooted. Grub menu loaded fine, followed by "out of disk.....press any key to continue". I pressed a key & Ubuntu booted, a bit slow but still booted. So here are my questions: 1- Since Ubuntu DOES boot, should I just leave it alone? 2- If I need to fix this, HOW do I do it? 3- What causes this error? $wolf@lpc-1:~$ df -h Filesystem Size Used Avail Use% Mounted on /dev/sda1 230G 9.1G 209G 5% / udev 1.6G 12K 1.6G 1% /dev tmpfs 655M 868K 654M 1% /run none 5.0M 0 5.0M 0% /run/lock none 1.6G 260K 1.6G 1% /run/shm wolf@lpc-1:~$

  Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >