Search Results

Search found 472 results on 19 pages for 'buggy'.

Page 14/19 | < Previous Page | 10 11 12 13 14 15 16 17 18 19  | Next Page >

  • DLINK WBR-1310B Wireless Router seems to hang...

    - by Ira Baxter
    I have a brand new DLINK-1310B Wireless Router (box never before opened, although I bought it the neighborhood computer junk store). I am using it at home (and in fact am using it this instant from a wireless laptop). When operative, I can ping it at 192.168.0.1, and I can log into it from the PC attached to by LAN and from the wireless PC at //192.168.0.1. In the course of the day since I've installed, it seems to have locked up 3 times. Each time the symptoms are my web browser (or other internet service) stops with a "No internet connection" error. Attempts to contact the router via 192.168.0.1 get no reaction, from either the wireless laptop or from the hardwired PC sitting next to it. It doesn't respond to pings to that address either. Rebooting fixes it. Its brand new. I've seen discussion in other questions about aging cheap electronics. Its too new to be aged. Anyboyd else seen this behavior with a DLINK-1310? Or do I just need to exchange it for another and try again? (I hate rolling dice, I bought the DLINK becuase a previous Linksys died of apparant heating problems). Remarkably, nobody talks about how much software is in a router. Is the stuff just buggy?

    Read the article

  • Troubleshooting: Monitor never turns on, system fans running, DVD-ROM does not open.

    - by Wesley
    Hi all, Here are my specs beforehand: ECS P4VXASD2+ (V5.0) motherboard FSB 533MHz Intel Pentium 4 2.40A GHz Prescott Socket 478 2x 256MB PC2100 DDR RAM, 2x 256MB PC133 SDRAM CoolMax 350W PSU DVD-ROM - will edit with brand & model 128MB ATi Radeon 9800 Pro AGP No hard drive So, I just put those parts together today and I tried to power it up, with the monitor connected to the Radeon 9800 in the AGP slot (mobo does not have VGA port). After turning it on, the CPU fan, graphics fan and system fan go on. However, the monitor remains in standby mode, despite being plugged in. Also, after pushing the button on the DVD-ROM drive, it does not open. I've used the DVD-ROM drive before with absolutely no issues. The graphics card was slightly buggy when I put it on another machine, which was left outside in winter weather for 3 months. (Still that computer's integrated graphics worked fine.) CMOS battery was replaced and jumpers are all set correctly. Now, I'm wondering whether the motherboard, CPU, PSU or GPU is the problem. What can I do to test which part is the problem? Just to clarify, I don't have a hard drive, so I usually boot Ubuntu from the disc drive. Anyways, thanks in advance!

    Read the article

  • DXVA and ATI.... what am I missing?

    - by Shiki
    ATI Radeon HD3650 ffdshow (the one comes with CCCP 2010-10 AND the latest from Free-codecs site) Catalyst 10.12 Latest DirectX, Windows 7 HP x64 If I try to play it simply, the player (mpc-hc) won't use the acceleration. If I disable checks, I get artifacts. Back then it worked perfectly with my Intel and ATI too (Lenovo ThinkPad T500, switchable graphics). This only appeared recently. What should I do? What am I missing? If possible, I don't really want to downgrade drivers (waaa ATI drivers s.ck ... sorry but.. honestly), because the older one got a buggy DP driver so my external display gets a totally wrong resolution. Info about the media file: Video: Format : AVC Format/Info : Advanced Video Codec Format profile : [email protected] Codec ID : V_MPEG4/ISO/AVC Writing library : x264 core 88 r1462 7fcffde Encoding settings : cabac=1 / ref=8 / deblock=1:0:0 / analyse=0x3:0x133 / me=umh / subme=8 / psy=1 / psy_rd=0.80:0.20 / mixed_ref=1 / me_range=24 / chroma_me=1 / trellis=2 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=-3 / threads=3 / sliced_threads=0 / nr=0 / decimate=1 / mbaff=0 / constrained_intra=0 / bframes=8 / b_pyramid=2 / b_adapt=2 / b_bias=0 / direct=3 / wpredb=1 / wpredp=2 / keyint=250 / keyint_min=25 / scenecut=40 / intra_refresh=0 / rc_lookahead=40 / rc=crf / mbtree=1 / crf=16.0 / qcomp=0.60 / qpmin=10 / qpmax=51 / qpstep=4 / ip_ratio=1.40 / aq=1:1.00 The sample file I'm testing at the moment: [Coalgirls]_Kiddy_Girl-and_01_(1920x1080_Blu-Ray_FLAC)_[91428679].mkv (I tried many x264 files, no use.) Artifacts

    Read the article

  • How do I fix a super slow MacBook?

    - by MakingScienceFictionFact
    I'm running a black MacBook 4.1. Intel Core 2 Duo @ 2.4 GHz, 2 GB RAM, 250 GB hard disk drive, bus speed is 800 MHz. It's about three years old in excellent shape externally. I treat this thing like a baby. It used to run awesome, but now it's super slow at everything. I get the spinning pizza of death constantly. It takes a long time to boot up or load any program, even Safari and iTunes. iPhoto is terribly slow. The Internet doesn't work properly and it reminds me of a buggy PC. I've formatted it and re-installed Mac OS X 10.6 (with all updates), and I've done the disk repairs process. As an iOS developer this is driving me crazy, but luckily I have an iMac to work on in the day which is fast. I'm ready to format it again, but that didn't work last time. After the last format, I copied back files from an external drive so maybe the offending files were hidden in there somewhere. Here are the hard disk drive and RAM specifications. It is upgrade-able to 4 GB of RAM. Hard disk drive: The Fujitsu Mobile MHY2250BH is a 250 GB, standard hard disk drive. Its burst transfer rate is 150 Mbyte/s. This is a 5400 RPM drive and comes with an 8 MB buffer. RAM: two sticks of 1 GB DDR2 SDRAM, speed: 667 MHz.

    Read the article

  • Auto Log-Off Windows users - Windows 2003 domain

    - by thehatter
    Hi! I am trying to make windows clients automatically log off after some time, I have been trying to use the winexit.scr which I have seen working else where in a similar environment. After working though these instructions (I did read the comments and notice the original ADM provided is buggy) I've had no joy what so ever! Winexit.scr refuses to read any settings in the registry, even while using a test account I can access the required reg key(s); edit, add, and remove values. Essentially winexit.scr always uses it's default values: 30 second timeout, no forced log-out. What I really want is a 30 minute timeout with a forced log-out, closing all the users apps etc. I've tried removing and re-adding the ADM template, creating the GPO from scratch several times, giving various registry permissions - including full control to "Everybody" just for fun! Oh, clients are all win XP SP3, DC is win 2003 R2 SP2. So, can anybody suggest something? Cheers!

    Read the article

  • Colorizing your terminal and shell environment?

    - by Stefan Lasiewski
    I spend most of my time working in Unix environments and using Terminal emulators. I try to use color on the commandline, because color makes the output more useful and intuitive. What are some good ways to add color to my terminal environment? What tricks do you do? What pitfals have you encountered? Unfortunately, support for color is wildly variable depending on terminal type, OS, TERM setting, utility, buggy implementations, etc. Here's what I do currently, after alot of experimentation: I tend to set 'TERM=xterm-color', which is supported on most hosts (but not all). I work on a number of different hosts, different OS versions, etc. I'm trying to keep things simple and generic, if possible. Many OSs set things like 'dircolors' and by default, and I don't want to modify this everywhere. So I try to stick with the defaults. Instead tweak my Terminal's color configuration. Use color for some unix commands (ls, grep, less, vim) and the Bash prompt. These commands seem to the standard "ANSI escape sequences" I've managed to find some settings which are widely supported, and which don't print gobbledygook characters in older environments (even FreeBSD4!) (For the most part). From my .bash_profile ### Color support # The Terminal application typically does 'export TERM=term=color' # Some terminal types will print Black, White & underlined with these settings. OS=`uname -s` case "$OS" in "SunOS" ) # Solaris9 ls doesn't allow color, so use special characters instead. LS_OPTS='-F' ;; "Linux" ) # GNU tools supports colors! See dircolors to customize colors export LS_OPTS='--color=auto' # Color support using 'less -R' alias less='less --RAW-CONTROL-CHARS' alias ls='ls ${LS_OPTS} export GREP_OPTIONS="--color=auto" ;; "Darwin"|"FreeBSD") # Most FreeBSD & Apple Darwin supports colors # LS_OPTS="-G" export CLICOLOR=true alias less='less --RAW-CONTROL-CHARS' export GREP_OPTIONS="--color=auto" ;; esac

    Read the article

  • How do I find my missing songs from last.fm?

    - by duality_
    My disk failed with all my music with it, lots of them. But luckily, I scrobbled every song to last.fm. I am looking for a way to scan my disk for my songs and check last.fm and tell me which songs are missing from my disk that are present on last.fm. So to recap: I would need to log into my last.fm account and compile a list of all the songs I have scrobbled and then scan my computer for missing songs. Is there a program or script that does this? I don't mind it being a shell script even. Edit: I know this is possible because I came close to this a little time ago. I created a PHP script (web page) that got all my songs through Last.fm API and then went through my files on disk and read their id3 tag. I got very close: the program showed missing songs, but there were many small issues (id3 reading was buggy, tags had different data, etc.) that required more programming time that I didn't have.

    Read the article

  • Free, simple, configurable SOCKS5 server

    - by Pooria Azimi
    I've been looking (for the past 6-7 hours) for a fast, free and configurable SOCKS5 server. I haven't found anything that matches my needs. They are either too complicated, too bare-bones or simply buggy as hell. This is (all) I need: I want it to run on Linux (and also OS X, preferably) I want it to listen on localhost:8888 When my app (say wget.. or curl --socks5=localhost:8888) requests http://www.google.com/search?q=asd (or any other url - both http and https), I want it to fetch the page not from google's servers, but from http://localhost:4444/cached?uri=http://www.google.com/search%3Fq%3Dasd. Nothing more! I don't need caching, or anything else. I just want a SOCKS5 server, running locally, which redirects all queries to my own (local) server. It could be written in C, C++, Python, PHP, Perl, Node.js or any other language. I don't care, as long as it supports my (very limited) needs, or I can easily change the source to make it so. Thanks a lot

    Read the article

  • Setting up xpra for client use in OS X

    - by Jonathan
    I've been trying to get xpra to run on OS X for the last few days to connect to my Ubuntu server. Note that there's a GUI for it called shifter, but that (at least on OS X) is still far too buggy. For those who don't know what xpra is, if you know what screen is, it's like screen for GUI X Windows apps tunneled over ssh. You can render a remote X app locally so it's faster than sending a series of compresses screen shots (like VNC), but with xpra you can disconnect and reconnect on different computers. To get the basic functionality you can just type "ssh -X server.location" and any GUI app you open from the command line will open locally. I've been able to get xpra to build by doing the following: Download pari-all-0.0.6.tar.gz from the xpra site listed under upstream and untar it. Issue the following Mac Ports command (Dependencies thanks to RogBlog): sudo port install python25 python26 py26-pyrex py26-gtk xorg-libXtst py25-gobject py25-gtk py25-nose py26-nose xorg-libXdamage xorg-libXcomposite xorg-libXtst xorg-libXfixes In the upstream list of v0.0.06 patches (NOT 0.0.8pre!) on the xpra site listed above, download mswindows-conditional-pyrex.patch. Open the patch with your favorite text editor and change the single occurrence of "win" in it to "darwin". Apply the patch to setup.py. Run do-build in the command line. Now where I'm stumped: how do I run xpra? The build produces a sub directory called install/bin in which xpra is located, but when I try to run it I get the following error: Traceback (most recent call last): File "./xpra", line 4, in import xpra.scripts.main ImportError: No module named xpra.scripts.main There is a file called main.py under xpra/scripts, but I don't know any python and I'm not sure if this is what it's looking for, and what to do with it even if it is. My goal is to set up xpra so I can install it into /usr/bin (or some other common path for executables) and execute it whenever I please. What do I do next?

    Read the article

  • Connecting a laptop to a TV via HDMI

    - by Madmartigan
    I just bought a new Dell XPS17 laptop (Win7) that only has HDMI output. My last 2 laptops had VGA, which I used to connect to my Sony Bravia 32" TV with no issues, but with the HDMI it's been quite a headache. Drivers for display adapters have been updated to the latest versions: Intel(R) HD Graphics Family NVIDIA GeForce GT 550M I went to a store and plugged in to 4 different TVs from different manufacturers. A sales rep and I spent about 30 minutes being baffled by the results (which are the same as my current TV): Extreme buggy behavior in the Nvidia and Windows display/resolution control panel Can not extend or duplicate displays, can only select one Third and fourth output devices "randomly" detected by the Windows control panel Could not get the screen to fit the output (edges cut off on all sides by about a half inch) Resolution and colors less than perfect. Artifacts around text. Display "randomly" cuts out Defaults to TV output only when plugged in Can not change resolution on either device when connected No audio from the TV Plugged in to 3 monitors from different manufacturers: Defaults to duplicated displays when plugged in Everything works perfectly So far, four people have gone through all the settings in the latop with no luck. I had similar, but not exactly matching results with a different laptop. I'm using the Sony Bravia currently at home, but in order to get it to work I have to turn on the laptop, wait until the display shows up on it, close the lid, then cycle through each output channel on the TV until I come back around to the HDMI port again, but still I have the symptoms described above. However: Once in a while, it just works. Sometimes, seemingly randomly, the output fits the screen perfectly. Sometimes the audio comes through the speakers too, but not always. Usually my screen saver "Mystify" will come up with a message that it cannot be displayed due to a limitation of the video card, but then sometimes it works fine. These 3 things seem to be independent of each other and don't always happen together. So, is there any way to get the laptop to output correctly to a TV, or is it just not meant to be?

    Read the article

  • How to reproduce the behavior of Mac OS X's dead keys on Windows 7?

    - by Pascal Qyy
    I'm French, but I've chosen to take a QWERTY keyboard for my MacBook Pro for many reasons: first of all, the AZERTY keyboard is not at all ergonomic because it has no numeric keypad, and I must use MAJ or CAPS LOCK to access to the numeric keys ; secondly, I've bought this mac for development ; and chars {, }, etc., are not directly accessible on the Apple AZERTY keyboard the last thing is that: the diacritics are VERY easy to produce on an Apple keyboard with Mac OS X : ? + c for a ç, for example, and many dead keys easy to use (e.g. ? + e, then e give you an é. So, I have no difficulties to write in my native language with this keyboard under Mac OS X. BUT, when I boot on Windows 7's Boot Camp partition, or when I use applications from it through VMware Unity, it is no longer the same comfort! Without numeric keypad, it's impossible to use it for produce specials characters (e.g.: Alt + 0231 for the ç) I've tried many solutions, like auto replacement in Microsoft Office (e.g.: ,,c being replaced by ç), but for all my diacritics, I must type a space, then a back space before the replacement work. I've also tried third party software, as Texter, but it is very buggy and don't work properly (or don't work at all) in many case! So, is there a solution somewhere, to have this Mac OS X's nice and comfortable way of producing diacritics for Windows 7? Thank in advance for your help and your time!

    Read the article

  • Puzzling TCP performance over 3G / UMTS

    - by lemonsqueeze
    I'm using 3G as my primary internet connection, and TCP over this thing is getting more puzzling every day. For example: Downloading from kernel.org is crazy fast: $wget http://www.kernel.org/pub/linux/kernel/v3.0/linux-3.6.8.tar.bz2 increases to ~500kB/s after a few secs ! Some servers are incredibly slow, for instance www.graphic-pc.com:Same thing, downloading a big file with wget it starts at ~30kB/s for a split second, then collapses to 5-10k or even worse. Web browsing is decent but somewhat unreliable. Randomly, a page will take really long to load or even fail to load, but a reload can succeed almost immediately. Now, by chance i started playing with OpenVPN over UDP on top of the 3G connection, and OMG suddenly everything's extremely fast !Same www.graphic-pc.com now shoots at 100-200kB/s ! What's going on here ??? How come it is so much better with the VPN than without ?? And why does graphic-pc.com crawl when kernel.org flies ?Something to do with my tcp stack (or the server), or some buggy router in between ?? Notes: Setup is laptop running Ubuntu Lucid and a Huawei 3G dongle (So direct pppd connection). I can reproduce this pretty much any time during the day and I'm not moving, so it's clearly not cell environment or internet congestion. (although kernel.org without VPN sometimes does worse in the evening, 60kB or so - but still 500kB with VPN !) For 2) wireshark shows retransmitted packets, dup ack's, even out of order sometimes. I've tried playing with different /proc/sys/net/ipv4 parameters (tcp_rmem, window_scaling, tcp_congestion...) doesn't seem to make a difference. Update: Tried under windows 7 (no VPN) with some interesting results: tcp settings : default tcp_optimizer kernel.org : 10 kB/s 20 kB/s graphic-pc.com: 8 kB/s 70 kB/s ! tcp_optimizer turned on ctcp among other things. Have to check what os graphic-pc.com is running, my bet is linux's tcp_westwood and ms ctcp don't mix well here...

    Read the article

  • ubuntu preseed installation keep missing mirror files

    - by JackWu
    Install ubuntu12.04.2 with preseed file, but there is one buggy problem about preseed mirror setting. The symptom here is installing process got stuck. So I track down the log file, and find out the real problem, the installation is looking for a file that's not there. This is just one of them, another pops up if I faked this file. This all happened during preseed, so I believe preseed has something to do with this. I google ubuntu preseed mirror and find this post saying: # If you select ftp, the mirror/country string does not need to be set. #d-i mirror/protocol string ftp d-i mirror/country string manual d-i mirror/http/hostname string archive.ubuntu.com d-i mirror/http/directory string /ubuntu d-i mirror/http/proxy string # Alternatively: by default, the installer uses CC.archive.ubuntu.com where # CC is the ISO-3166-2 code for the selected country. You can preseed this # so that it does so without asking. #d-i mirror/http/mirror select CC.archive.ubuntu.com # Suite to install. #d-i mirror/suite string lucid # Suite to use for loading installer components (optional). #d-i mirror/udeb/suite string lucid # Components to use for loading installer components (optional). #d-i mirror/udeb/components multiselect main, restricted I wonder the difference between d-i mirror/http/hostname and d-i mirror/http/mirror, I mean they all specify a mirror, right? In my preseed file, this is no d-i mirror/http/mirror, and d-i mirror/http/hostname points to my own repo as you might notice in the previous image. Here is my question: Does preseed fetches file/resource from internet, if I use local repo? Why it's looking for file that's not even there? This has bothered for quite time, many thanks in advance to anyone who might give any help.

    Read the article

  • Raspberry pi slows down my entire network

    - by gnusouth
    Whenever my Raspberry Pi is connected to the network (via ethernet) the entire network is slowed to a crawl. On my main computer, ping times for google.com go from ~10ms to ~200ms and it takes forever to load web pages. Connections are also slow on the Pi, with an apt-get update showing pathetic speeds in the order of 1KB/s. Turning off the Pi completely removes the drag from the network. I've tried static and dynamic IP addresses for the Pi, but both have the same problems. I'm currently using Raspbian (downloaded today), but also had this problem with Arch Linux. I've checked the connection's duplex with dmesg | grep -i duplex, which shows that the Pi's connection is running at 100Mbps, full-duplex, as expected. My modem/router is a Billion 7404VNPX (an Australian thing); relatively high-end, albeit a bit buggy at times (it will occassionally delete all its firewall settings). It assigns IPs in the range 192.168.1.1 to 192.168.1.20 and has 192.168.1.254 as its own IP. When I assign static IPs I tend to use the 192.168.1.200 area. Does anyone have any idea as to what could be causing this weird slowdown? Or any tests I could try? Thanks

    Read the article

  • Noisily rendered text in Firefox

    - by Notinlist
    It came to me in a week or so that certain pages (Facebook, StrackOverflow, some news sites) have text rendering errors in Firefox. As a workaround if I refresh the page, or simply select and deselect the buggy text, the unpleasant effect disappears. I don't have this effect in Internet Explorer or in any of my desktop applications. Windows 7 Pro 64bit (fresh) Firefox 19.0.2 (fresh) Ati Radeon HD 4600 Series (fresh drivers) Thanks for the help in advance! Update 1/2 I have only three addons: Forecastfox, Hungarian spell checking dictionary and Quick locale switcher. The latter two are installed after the effect appeared. I disabled the first individually and did not helped. But if I start my firefox with disabled addons I cannot reproduce the error. As far as I know this mode does not mean disabled plugins, which I do have (Adobe Acrobat, Citrix ICA Client, Google Earth plugin, Google update, Java Deployment Toolkit 6, MS Office 2010, MS Windows Media Player Firefox, Shockwave Flash, Silverlight, VLC Web). Update 2/2 If I disable all plugins and extensions I still have the problem. If I start Firefox with disabled addons then I cannot reproduce the problem.

    Read the article

  • Windows Displays Double the Actual Installed Physical Memory

    - by Andrew Barber
    I have a server I've installed Windows Web 2008 R2 on, which is reporting that I have double the physical memory installed as is actually the case. In msinfo32 "Installed Physical Memory" shows as 2x what ever the actual installed amount is, though "Total Physical Memory" shows the correct amount. The "System" info window shows installed memory as 2x, with the correct amount in parenthesis listed as the "usable" amount). This server mistakenly had Windows Web 2008 (32-bit) installed on it just previously, and that OS also reported the same faulty information as Win2K8R2 is reporting. BIOS reports the correct amount, memtest was run on this server before installation, and a previous Windows 2000 instance installed on this system also reported the correct amount, as I recall. Server operation seems to be fine as well (it's only trying to use the correct amount of memory). The server is a generic pizzabox running on a SuperMicro X6DVL-EG with dual Xeon-3.2's. Memory installed are 4 matching mt18vddf12872g-335c3 sticks (1GB pc2700 DDR ECC REG cl2.5) This behavior occurs whether two or all four are installed. So, has anyone seen something like this before? Have any idea about what's causing it, and how I should be concerned about it? Everything else seems good so far, and I'll be upgrading the memory before putting the server into service, but I don't want to spend too much time/money/effort on the server if it's got something odd going wrong here. UPDATE: There was a question I ran into regarding memory sparing in the BIOS and a possible (buggy) effect thereof; however, flipping that bit back and forth in the BIOS revealed that isn't the issue. Still flummoxed a bit about this one, though I still have seen no negative impacts. Post-Answer Update (January 13, 2011): Upgrading the system with new, larger memory has fixed this issue.

    Read the article

  • What is a good replacement for StumbleUpon's Share feature?

    - by Mofoo
    I've been using Firefox + StumbleUpon's Share feature with my friends for years now. It is a perfect way of sharing links directly with your friends. You first need to be Following each other and then on the SU toolbar, you can "Share" with your list of friends. You can even include a personal message. The friend will receive a notification with # of pending shares in their toolbar (bold & red). They click the stumble button and it will navigate to the site plus show a yellow bar with your message. I literally use it daily. But then Chrome came along and beat the tar out of Firefox (and other browsers) in terms of usability and performance. But it doesn't (and never will according to Google) allow toolbars. StumbleUpon's solution in Chrome is a fake toolbar (html) that gets injected into the page you're viewing. It's buggy and performance is low. Overall it's not an acceptable solution. I'm looking for a replacement with something that is just as easy to send/receive links. I was thinking of Twitter DM's and using a bookmarklet, but I wanted to survey the collective for other options Thanks in advance for your input!

    Read the article

  • Cannot open /dev/rfcomm1 : Host is down

    - by srj0408
    I am working on raspberry PI and on Bluetooth. I am using old raspberry pi kernel as the new one has got some bugs that were not resolved with respect to the bluez daemon. At present my kernel version is 3.6.11. I am using a USB bluetooth dongle and my sole purpose is to auto connect the bluetooth dongle when ever it is in range. For that i think i have to run a script in the backend on RPI that will keep on checking the existence of usb bluetooth dongle. I started from the very scratch. I installed bluez daemon using apt-get install bluetooth bluez utils blueman and then i used hciconfig which gives me that my bluetooth usb dongle is working fine. But when i did hcitool scan , it give me no device in range even though my Serial bluetooth Device was on. I wasn't able to find any device in vicinity. Also when i unplugged and plug the USB dongle again, i was able to scan the serial device , but when i repeat the process, i find the earlier condition of not finding any deice. I had find another useful link, but that need address of the bluetooth device that need to be connected. I want to automate this using hcitool scan, storing the output to the a file and then comparing it with already paired devices and their name. For that i need to figure out why hcitool scan is sometime working and sometime not. ? Can some one help me in figuring out why this is happening. Is there any problem on hardware side i.e Bluetooth dongle is buggy or i had some problem in bluez utils. Edit 1: While as of now, hcitool scan is giving me my remote device address but still i am getting the same issue of HOUST IS DOWN, '/dev/rfcomm1'. I am really not getting any idea of what to be done.

    Read the article

  • What is a good alternative to the WPF WebBrowser Control?

    - by VoidDweller
    I have an MDI WPF app that I need to add web content to. At first, great it looks like I have 2 options built into the framework the Frame control and the WebBrowser control. Given that this is an MDI app it doesn't take long to discover that neither of these will work. The WPF WebBrowser control wraps up the IE WebBrowser ActiveX Control which uses the Win32 graphics pipeline. The "Airspace" issue pretty much sums this up as "Sorry, the layouts will not play nice together". Yes, I have thought about taking snapshots of the web content rendering these and mapping the mouse and keyboard events back to the browser control, but I can't afford the performance penalty and I really don't have time to write and thoroughly test it. I have looked for third party controls, but so far I have only found Chris Cavanagh's WPF Chromium Web Browser control. Which wraps up Awesomium 1.5. Together these are very cool, they play nice with the WPF layouts. But they do not meet my performance requirements. They are VERY HEAVY on memory consumption and not to friendly with CPU usage either. Not to mention still quite buggy. I'll elaborate if you are interested. So, do any of you know of a stable performant WPF web browser control? Thanks.

    Read the article

  • DataView.RowFilter Vs DataTable.Select() vs DataTable.Rows.Find()

    - by Aseem Gautam
    Considering the code below: Dataview someView = new DataView(sometable) someView.RowFilter = someFilter; if(someView.count > 0) { …. } Quite a number of articles which say Datatable.Select() is better than using DataViews, but these are prior to VS2008. Solved: The Mystery of DataView's Poor Performance with Large Recordsets Array of DataRecord vs. DataView: A Dramatic Difference in Performance Googling on this topic I found some articles/forum topics which mention Datatable.Select() itself is quite buggy(not sure on this) and underperforms in various scenarios. On this(Best Practices ADO.NET) topic on msdn it is suggested that if there is primary key defined on a datatable the findrows() or find() methods should be used insted of Datatable.Select(). This article here (.NET 1.1) benchmarks all the three approaches plus a couple more. But this is for version 1.1 so not sure if these are valid still now. Accroding to this DataRowCollection.Find() outperforms all approaches and Datatable.Select() outperforms DataView.RowFilter. So I am quite confused on what might be the best approach on finding rows in a datatable. Or there is no single good way to do this, multiple solutions exist depending upon the scenario?

    Read the article

  • Algorithm design, "randomising" timetable schedule in Python although open to other languages.

    - by S1syphus
    Before I start I should add I am a musician and not a native programmer, this was undertook to make my life easier. Here is the situation, at work I'm given a new csv file each which contains a list of sound files, their length, and the minimum total amount of time they must be played. I create a playlist of exactly 60 minutes, from this excel file. Each sample played the by the minimum number of instances, but spread out from each other; so there will never be a period where for where one sound is played twice in a row or in close proximity to itself. Secondly, if the minimum instances of each song has been used, and there is still time with in the 60 min, it needs to fill the remaining time using sounds till 60 minutes is reached, while adhering to above. The smallest duration possible is 15 seconds, and then multiples of 15 seconds. Here is what I came up with in python and the problems I'm having with it, and as one user said its buggy due to the random library used in it. So I'm guessing a total rethink is on the table, here is where I need your help. Whats is the best way to solve the issue, I have had a brief look at things like knapsack and bin packing algorithms, while both are relevant neither are appropriate and maybe a bit beyond me.

    Read the article

  • FusionCharts vs GoogleCharts vs HighCharts suggestions required for commercial use

    - by Forte
    I find that FusionCharts v3 evaluation and HighCharts cannot be used for commercial purpose. Google charts is the best option but those are not as good looking as any of the above. They don't even have 3d charts although their visualization API does support 3D which i cannot find. Is there any open source graphing or charting solution available which can be used in commercial products? I even looked in to Open Flash Charts 2 but found that the developer had left the project long time a go and the currently out libs are way too buggy. I had to fix more than 50 bugs to get their 1 chart working. I tried to fix others but couldn't get Pie charts etc. working. What i'm looking for is - 1. Attractive 3d column chart. 2. 3d Pie Chart. 3. Spline Chart. 4. Geographical Chart. Does anyone knows any open source or free solution which can be used for commercial products? Cheers!

    Read the article

  • Ruby on Rails: How to sanitize a string for SQL when not using find?

    - by williamjones
    I'm trying to sanitize a string that involves user input without having to resort to manually crafting my own possibly buggy regex if possible, however, if that is the only way I would also appreciate if anyone can point me in the right direction to a regex that is unlikely to be missing anything. There are a number of methods in Rails that can allow you to enter in native SQL commands, how do people escape user input for those? The question I'm asking is a broad one, but in my particular case, I'm working with a column in my Postgres database that Rails does not natively understand as far as I know, the tsvector, which holds plain text search information. Rails is able to write and read from it as if it's a string, however, unlike a string, it doesn't seem to be automatically escaping it when I do things like vector= inside the model. For example, when I do model.name='::', where name is a string, it works fine. When I do model.vector='::' it errors out: ActiveRecord::StatementInvalid: PGError: ERROR: syntax error in tsvector: "::" "vectors" = E'::' WHERE "id" = 1 This seems to be a problem caused by lack of escaping of the semicolons, and I can manually set the vector='\:\:' fine. I also had the bright idea, maybe I can just call something like: ActiveRecord::Base.connection.execute "UPDATE medias SET vectors = ? WHERE id = 1", "::" However, this syntax doesn't work, because the raw SQL commands don't have access to find's method of escaping and inputting strings by using the ? mark. This strikes me as the same problem as calling connection.execute with any type of user input, as it all boils down to sanitizing the strings, but I can't seem to find any way to manually call Rails' SQL string sanitization methods. Can anyone provide any advice?

    Read the article

  • Paperclip and Amazon S3 Issue

    - by Jimmy
    Hey everyone, I have a rails app running on Heroku. I am using paperclip for some simple image uploads for user avatars and some other things, I have S3 set as my backend and everything seems to be working fine except when trying to push to S3 I get the following error: The AWS Access Key Id you provided does not exist in our records. Thinking I mis-pasted my access key and secret key, I tried again, still no luck. Thinking maybe it was just a buggy key I deactivated it and generated a new one. Still no luck. Now for both keys I have used the S3 browser app on OS X and have been able to connect to each and view my current buckets and add/delete buckets. Is there something I should be looking out for? I have my application's S3 and paperclip setup like so development: bucket: (unique name) access_key_id: ENV['S3_KEY'] secret_access_key: ENV['S3_SECRET'] test: bucket: (unique name) access_key_id: ENV['S3_KEY'] secret_access_key: ENV['S3_SECRET'] production: bucket: (unique_name) access_key_id: ENV['S3_KEY'] secret_access_key: ENV['S3_SECRET'] has_attached_file :cover, :styles => { :thumb => "50x50" }, :storage => :s3, :s3_credentials => "#{RAILS_ROOT}/config/s3.yml", :path => ":class/:id/:style/:filename" Note: I just added the (unique name) bits, those aren't actually there--I have also verified bucket names, but I don't even think this is getting that far. I also have my heroku environment vars setup correctly and have them setup on dev

    Read the article

  • Odd Infragistics UltraComboEditor data binding non-bug

    - by Richard Dunlap
    Within an Infragistics 8.2 UltraComboEditor, we had the following properties set via C#: DataSource = dataSource; ValueMember = "Measure"; DisplayMember = "Name"; DataBindings.Add("Value", repository, "Measure"); DataBindings["Value"].DataSourceUpdateMode = DataSourceUpdateMode.OnPropertyChanged; where dataSource was an array of objects, each with a property Measure, and repository was an object with a property Measure. (Those strings are actually constructor parameters -- just using explicit strings to simplify the example.) In the course of some refactoring, the name of the property on the objects in the array was changed to BaseEnum (the objects are actually wrapped enumerations, for the curious), but the name of ValueMember above was not changed. And yet, the combo box binding continued to work through initial testing, beta testing, and even after release... until two customers emailed in noting that the combo box was no longer changing the underlying parameter. We were able to dig out the problem by careful study of the source code repository... despite being in the awkward position of not being able to replicate the buggy behavior internally. Two part question: What's happening under the hood that allowed the binding to continue to function, and/or what might be unique about those two users that caused the binding to (correctly) fail? (O/S version isn't alone the answer, and we get the unexpectedly functioning binding on machines that have never had a version of the software before, so we're not looking at rogue binaries). Are there tools that might have been able to warn us about the misbind, even if something was cleaning up behind?

    Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18 19  | Next Page >