Search Results

Search found 3039 results on 122 pages for 'centos 5'.

Page 14/122 | < Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >

• CentOS: Init scripts failing to start for some unknown reason

  - by user705142

  I'm running CentOS 6.2 - I've just migrated some applications over to a failover server, and copied their init scripts into /etc/init.d. I've made them executable, added them to chkconfig, with chkconfig -add, set their levels, made sure they're residing in /etc/rc.d/ - made sure I can execute them from rc2.d etc. The permissions are the same on both servers. They're also running in the same order as on the primary server Yet on reboot they don't start. Any ideas? The offenders are these: jetty 0:off 1:off 2:on 3:on 4:on 5:on 6:off smart 0:off 1:off 2:on 3:on 4:on 5:on 6:off /etc/init.d: -rwxr-xr-x. 1 root root 14456 Mar 13 20:21 jetty -rwxrwxrwx. 1 root root 5829 Mar 29 09:58 smart /etc/rc.d/rc3.d lrwxrwxrwx. 1 root root 15 Mar 29 19:21 S99jetty -> ../init.d/jetty lrwxrwxrwx. 1 root root 11 Mar 26 17:12 S99local -> ../rc.local lrwxrwxrwx. 1 root root 15 Mar 29 19:21 S99smart -> ../init.d/smart I've checked, and I'm in run level 3. I've checked their logs, and there's no indication that that they've been started. I can start them manually easily - and other services are starting normally. I'm completely out of ideas really.

  Read the article

• CentOS Installation on a Cisco MCS 7800

  - by William

  Hello, I'm having some problems installing CentOS 5.5 Final (i386) Onto my server, a Cisco MCS 7800. The problem comes very early into the installation. When the welcome screen comes up ans gives you the option on how to boot into the DVD, Ill press enter to go into the graphical installer. The Screen will then have a blinking cursor in the top left of the screen and will never go away (I thought that it just might need time but I let it sit for over 5 hours.) I then booted into it again and tried using Linux Text thinking it was a problem with graphical installer. That didn't work, same problem. Then I tried a DVD of RHEL 5 and got the same problem, both graphical and Linux text. At this point i think its a hardware problem. The Server has 2GB of ECC RAM, 1 Pentium 4 CPU @ 3.06GHZ and 2 WD Hard Drives (80GB) Configured for RAID 0. ( Also there is a option in the BIOS for what OS type and that is set to Linux.) If anyone has any idea what is going on, it would be helpful. ================Edit================== ooshro, typing "text" doesn't change a thing. still stuck at the blinking cursor. I looked it up and its really the same thing as typing "linux text", which as stated in the first part of my question, i've already done.

  Read the article

• Please help to find a solution for two way, real-time synchronization on Centos 5.5 64Bit

  - by Vipul Limbachiya

  I am in need of a real time, two way synchronization software for Centos 5.5 / 64Bit. Here's little explanation: It needs to be able to perform: Two way synchronization. It must be realtime. By realtime means it can be almost realtime, i.e. a delay of 1 second for example is fine. And the folders are on the same server. I am currently using GlusterFS across two webservers. However, it has extremely poor small file read performance and it's slowing down my website. There's nothing more that can be done to improve this, I have already tested many configurations. As a solution, I was going to mount a RAM drive (tmpfs) that mirrors the GlusterFS web files but get the webserver to use the RAM drive. The issue is that I need two way realtime mirroring or replication between glusterfs and the RAM drive. I need this is as Apache writes files as wells. As I said, realtime two way synchronization across two folders. Which are in fact 2 different mounts points. The RAM (tmpfs) mount poing and the GlusterFS mount point. I already know about: Rsync - Which is one way Unison - Which is not realtime Please suggest me any solution free or paid. Thanks in advance

  Read the article

• IP to IP forwarding with iptables [centos]

  - by FunkyChicken

  I have 2 servers. Server 1 with ip 1.1.1.1 and server 2 with ip 2.2.2.2 My domain example.com points to 1.1.1.1 at the moment, but very soon I'm going to switch to ip 2.2.2.2. I have already setup a low TTL for domain example.com, but some people will still hit the old ip a after I change the ip address of the domain. Now both machines run centos 5.8 with iptables and nginx as a webserver. I want to forward all traffic that still hits server 1.1.1.1 to 2.2.2.2 so there won't be any downtime. Now I found this tutorial: http://www.debuntu.org/how-to-redirecting-network-traffic-a-new-ip-using-iptables but I cannot seem to get it working. I have enabled ip forwarding: echo "1" > /proc/sys/net/ipv4/ip_forward After that I ran these 2 commands: /sbin/iptables -t nat -A PREROUTING -s 1.1.1.1 -p tcp --dport 80 -j DNAT --to-destination 2.2.2.2:80 /sbin/iptables -t nat -A POSTROUTING -j MASQUERADE But when I load http://1.1.1.1 in my browser, I still get the pages hosted on 1.1.1.1 and not the content from 2.2.2.2. What am I doing wrong?

  Read the article

• CentOS 5.7 issues with iptables

  - by Corey Whitaker

  I'm trying to set up IPTables on a new CentOS server. This server will function as an FTP server that I need to be accessible from the outside, however, I want to lock down SSH to only accept internal IP connections. I need to allow SSH for 10.0.0.0/8 and 172.16.132.0/24. Below I've posted my /etc/sysconfig/iptables file. Whenever I apply this, I essentially lock myself out and I have to access it via console using Vsphere. Can somebody show me what I'm doing wrong? I'm connecting from my laptop with an IP of 172.16.132.226. *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [115:15604] :RH-Firewall-1-INPUT - [0:0] -A INPUT -j RH-Firewall-1-INPUT -A FORWARD -j RH-Firewall-1-INPUT -A RH-Firewall-1-INPUT -i lo -j ACCEPT -A RH-Firewall-1-INPUT -p icmp -m icmp --icmp-type any -j ACCEPT -A RH-Firewall-1-INPUT -p esp -j ACCEPT -A RH-Firewall-1-INPUT -p ah -j ACCEPT -A RH-Firewall-1-INPUT -d 224.0.0.251 -p udp -m udp --dport 5353 -j ACCEPT -A RH-Firewall-1-INPUT -p udp -m udp --dport 631 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m tcp --dport 631 -j ACCEPT -A RH-Firewall-1-INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A RH-Firewall-1-INPUT -s 10.0.0.0/8 -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT -A RH-Firewall-1-INPUT -s 172.16.132.0/24 -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 20 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 21 -j ACCEPT -A RH-Firewall-1-INPUT -j REJECT --reject-with icmp-host-prohibited COMMIT

  Read the article

• Connection timed out on Node.js app running under CentOS

  - by ss1271

  I followed this tutorial to create a simple node.js app on my CentOS: the node.js version is: $ node -v v0.10.28 Here's my app.js: // Include http module, var http = require("http"), // And url module, which is very helpful in parsing request parameters. url = require("url"); // show message at console console.log('Node.js app is running.'); // Create the server. http.createServer(function (request, response) { request.resume(); // Attach listener on end event. request.on("end", function () { // Parse the request for arguments and store them in _get variable. // This function parses the url from request and returns object representation. var _get = url.parse(request.url, true).query; // Write headers to the response. response.writeHead(200, { 'Content-Type': 'text/plain' }); // Send data and end response. response.end('Here is your data: ' + _get['data']); }); // Listen on the 8080 port. }).listen(8080); However, when I uploaded this app onto my remote server (assume the address is 123.456.78.9), I couldn't get access to it on my browser http://123.456.78.9:8080/?data=123 The browser returned Error code: ERR_CONNECTION_TIMED_OUT. I tried the same app.js code which runs fine on my local machine, is there anything I am missing? I tried to ping the server and its address was reachable. Thanks.

  Read the article

• Fresh install CentOS 6.4 64b with directadmin slowly consumes all memory and crashes

  - by Coen Ponsen

  Dear server fault community, This is my first question on server fault, i'm new to server (mis)configuration so please forgive me for asking something stupid :) I'm running Directadmin on a CentOS 6.4 64b with 4GB memory and over 10000Gh virtual machine. I migrated my websites because my former vps couldn't keep up anymore. Only half of the websites from this 1GB machine were migrated jet. So the migration is still in progress and already my server crashes every day. The server performance up until that moment is perfect. The directadmin log files show nothing out of the ordinary. Yesterday only the mysql server crashed but it also crashed the entire machine before. The memory usage in DA seems to be normal: directadmin directadmin (pid 3923 22158 22159 22160 22161 22162 )8.75 MB dovecot dovecot (pid 3851 ) 47.8 MB exim exim (pid 1350 ) 1.29 MB httpd (pid 21525 21528 21529 21530 21531 21532 21546 21571 21742 21743 21744 )490.4 MB mysqld mysqld (pid 1299 ) 287.8 MB named named (pid 3807 ) 16.3 MB proftpd proftpd (pid 1481 ) 1.91 MB sshd sshd (pid 1173 21494 ) 5.16 MB Restarting services immediately frees up memory, but slowly over time the memory usage increases(about 24 hours to crash). The commands: # sync # echo 3 > /proc/sys/vm/drop_caches Will free al memory correct. I could just create a cronjob but it seems the wrong way around to me. I can't seem to pinpoint the cause. Any advices, references or tips are highly appreciated! Greetings, Coen edit: free -m : after drop_caches: total used free shared buffers cached Mem: 3830 735 3095 0 0 21 -/+ buffers/cache: 712 3117 Swap: 991 0 991 I'll post another one this evening.

  Read the article

• Why am I experiencing random connection timeouts? (CentOS)

  - by Ryan

  I have a CentOS server setup that currently hosts several websites (all relative of each other in some form or another). As of recently throughout the day at the most random times the website speed will lag to a crawl and eventually hit a connection timeout. When I say random times this typically happens anywhere between 10am and 1pm usually, however, this morning this happened to me at 8am. I do not have a lot of familiarity with server knowledge as far as what I am looking for in this situation. What are some possible causes of why my server is slowing the websites down to a complete crawl or timing out? Are there specific things I should be checking for when this happens? I have noticed using: tail /var/log/httpd/access_log That usually when this down time occurs there are lot of IP addresses related to BingBot, Googlebot, and sometimes various bots or spiders that I am unfamiliar with. Could this be related and if so how can I avoid this from causing my websites to lag out? Thanks in advance for any help or advice. The websites that are timing out are built with PHP and use a MySQL database to display information.

  Read the article

• Cannot configure hostname keeps on changing after reboot CentOS 6 + nginx [on hold]

  - by The Wolf

  I just finished this tutorial I found online: http://www.unixmen.com/install-lemp-nginx-with-mariadb-and-php-on-centos-6/ Now, I am having trouble making a hostname, you can see the result at: http://www.intodns.com/busilak.com here are my confs /etc/hosts 127.0.0.1 localhost.localdomain localhost localhost4.localdomain4 localhost4 # Auto-generated hostname. Please do not remove this comment. 198.49.66.204 host.busilak.com busilak.com host ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 /etc/sysconfig/network NETWORKING="yes" GATEWAYDEV="venet0" NETWORKING_IPV6="yes" IPV6_DEFAULTDEV="venet0" HOSTNAME="host.busilak.com" /etc/nginx/conf.d/default.conf server { #listen 80; #server_name host.busilak.com; #charset koi8-r; #access_log logs/host.access.log main; location / { root /usr/share/nginx/html; index index.html index.htm; } error_page 404 /404.html; location = /404.html { root /usr/share/nginx/html; } Question: Is there anything I should have done? I just want to use my domain: busilak.com as default domain for my server, such that when I open busilak.com it would point readily to my VPS ip address.

  Read the article

• Cant configure DNS properly on centos

  - by Nuker

  I am on a VPS i must manage my own. I have network problems because in the last days many of my users report they cant enter my site from my domain and seems like Google and Facebook cant either (this never happened before). However i can enter my site without problems and so many other people as well. So i tested by making a php include like this <?php include 'http://mysite.com/somepage.php'; ?> and i get this error: Warning: include(): php_network_getaddresses: getaddrinfo failed: Name or service not known in I even tried by including content from yahoo.com or facebook and didnt work either. However the includes will work if i use IPs instead of domains. Do i have a DNS problem or something? What can i do to fix it? Im on a Linux 2.6.32-431.11.2.el6.x86_64 on x86_64 CentOS Linux 6.5 I have this on my resolv.conf # Generated by NetworkManager # No nameservers found; try putting DNS servers into your # ifcfg files in /etc/sysconfig/network-scripts like so: # # DNS1=xxx.xxx.xxx.xxx # DNS2=xxx.xxx.xxx.xxx # DOMAIN=lab.foo.com bar.foo.com nameserver 8.8.8.8 nameserver 8.8.4.4 Thank you.

  Read the article

• HPET missing from available clocksources on CentOS

  - by squareone

  I am having trouble using HPET on my physical machine. It is not available, even though I have enabled it in my bios, forced it in grub, and triple checked my kernel to include HPET in its compilation. Motherboard: Supermicro X9DRW Processor: 2x Intel(R) Xeon(R) CPU E5-2640 SAS Controller: LSI Logic / Symbios Logic SAS2004 PCI-Express Fusion-MPT SAS-2 [Spitfire] (rev 03) Distro: CentOS 6.3 Kernel: 3.4.21-rt32 #2 SMP PREEMPT RT x86_64 GNU/Linux Grub: hpet=force clocksource=hpet .config file: CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_HPET=y dmesg | grep hpet: Command line: ro root=/dev/mapper/vg_xxxx-lv_root rd_NO_LUKS rd_LVM_LV=vg_xxxx/lv_root KEYBOARDTYPE=pc KEYTABLE=us rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=vg_xxxx/lv_swap rd_NO_DM LANG=en_US.UTF-8 rhgb quiet panic=5 hpet=force clocksource=hpet Kernel command line: ro root=/dev/mapper/vg_xxxx-lv_root rd_NO_LUKS rd_LVM_LV=vg_xxxx/lv_root KEYBOARDTYPE=pc KEYTABLE=us rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=vg_xxxx/lv_swap rd_NO_DM LANG=en_US.UTF-8 rhgb quiet panic=5 hpet=force clocksource=hpet cat /sys/devices/system/clocksource/clocksource0/current_clocksource: tsc cat /sys/devices/system/clocksource/clocksource0/available_clocksource: tsc jiffies What is even more confusing, is that I have about a dozen other machines that utilize the same kernel .config, and can use HPET fine. I fear it is a hardware issue, but would appreciate any advice or help with getting HPET available. Thanks in advance!

  Read the article

• Linux Centos 6 becomes unavailable from time to time - OS&network issue

  - by adoado0

  I am encountering following problem. There is one server (DL160 G5) running Centos 6.3 with default kernel 2.6.32-220.2.1.el6.x86_64 - at this point I'd like to add that issue appeared also at older version - 6.1 and older kernel (do not remember exactly which version). There is cPanel installed and from time to time it becomes unavailable (network connection). What I've checked is (via KVMoIP): load average is completely normal it does not lack memory or disk space when problem occurs no console notifications checked all access logs and there is no sign that it can be caused by a client script cannot even access local interface (127.0.0.1) or main IP address running tcpdump I can only see packets arriving to server - no responses all services seem to be running properly (mail,sql,http,ssh) checked crontab and all clients' crontabs too network port utilisation is low ( up to several Mbits) arriving packet rate is low - hundreds per second (according to tcpdump) console (via kvmoip) works fine, no lags there is no conntrack at this server there is no ipv6 at this server flushing iptables, unloading modules does not resolve problem restarting network does not resolve problem, no errors appear it also occurs when two sepearate networks are configured (and multiple gateways) as well as one IP, one default gw and one network is configured - so it seems network configuration independent it seems to repeat randomly (load,packet rate,bandwith usage,load independent) checked server with different rootkit detection tools - it seems to be clean server has been rebooted, it did not change anything there are no interface errors it apperas randomly can be once a week or several times per day It usually works fine after 1-15 minutes. What I can also check? It is definitely OS issue - there is traffic at interface only in one direction when problem occurs, can not even ping loopback. Any ideas? Recommended checks? Anything I did not checked above.

  Read the article

• CentOS and OpenSSH [on hold]

  - by Stephen

  I've recently installed CentOS 6 on an old Dell PC. I'm trying to setup OpenSSH at the moment, I been following some tutorials (http://www.youtube.com/watch?v=QKafb0koJEg) on You Tube, while they have been very helpful I'm at the point where I need to ask some questions. My goal here is to be able to access the server from my work computer and from my personal laptop (which will be on the same home network as the server). I've installed OpenSSH with no issues. So the first thing I was advised to do was port forwarding. So in the sshd_config file, I've changed Port 22 to Port xxxx (where xxxx is a obviously a four digit value). I then restart the sshd service. I've also configured my router for forward port 22 onto xxxx. Is there anything else I need to do? I've generated the keys on my laptop, and I'm trying to copy them to the server as follows: scp id_rsa.pub xxxxxxxx@localhost:.ssh/authorized_keys but this command fails with the following error message: ssh: connect to host localhost port 22: Connection refused lost connection Any help appreciated. Regards...

  Read the article

• CentOS 6 and Sun/Oracle Java Issue

  - by user1710563

  I have a OpenVZ VPS running CentOS 6.3 64 bit and when I try to install JRE 7 64bit using the command: rpm -Uvh java.rpm It gives me this error: Preparing... ########################################### [100%] 1:jre ########################################### [100%] Unpacking JAR files... rt.jar... Error: Could not open input file: /usr/java/jre1.7.0_09/lib/rt.pack jsse.jar... Error: Could not open input file: /usr/java/jre1.7.0_09/lib/jsse.pack charsets.jar... Error: Could not open input file: /usr/java/jre1.7.0_09/lib/charsets.pack localedata.jar... Error: Could not open input file: /usr/java/jre1.7.0_09/lib/ext/localedata.pack I then tried the command: java -version And it gives me this error: Error occurred during initialization of VM Could not reserve enough space for object heap Error: Could not create the Java Virtual Machine Error: A fatal exception has occurred. Program will exit. Why does this happen if I have more than enough RAM on the VPS to run this (1GB)? Could it be an issue with the host node of the VPS? Thanks EDIT 1: Link to beancounter screenshot http://puu.sh/1xwxB EDIT 2: Link to htop screenshot http://puu.sh/1xwDl

  Read the article

• CentOS 5.5 : Postfix, Dovecot & MySQL

  - by GruffTech

  I'm hoping someone has seen this issue before because I'm at quite a loss. We're building a new outbound smtp server for our clients that features anti-spam scanning and virus scanning for outbound emails, something we had not previously done. So with CentOS 5.5 x64, Installed and patched completely. Postfix & Dovecot both installed via base repo. [grufftech@outgoing postfix]# rpm -qa | grep postfix postfix-2.3.3-2.1.el5_2 [grufftech@outgoing postfix]# rpm -qa | grep dovecot dovecot-1.0.7-7.el5 [grufftech@outgoing ~]# dovecot --build-options Build options: ioloop=poll notify=inotify ipv6 openssl SQL drivers: mysql postgresql Passdb: checkpassword ldap pam passwd passwd-file shadow sql Userdb: checkpassword ldap passwd prefetch passwd-file sql static /etc/dovecot.conf auth default { mechanisms = plain login digest-md5 cram-md5 passdb sql { args = /etc/dovecot-mysql.conf } userdb sql { args = /etc/dovecot-mysql.conf } userdb prefetch { } user = nobody socket listen { master { path = /var/run/dovecot/auth-master mode = 0660 user = postfix group = postfix } client { path = /var/spool/postfix/private/auth mode = 0660 user = postfix group = postfix } } } All the server is doing is auth for postfix, so no reason to have imap / pop / dict. /etc/dovecot-mysql.conf driver = mysql connect = host=10.0.32.159 dbname=mail user=****** password=******** default_pass_scheme = plain user_query = select 1 password_query = select password from users where username = '%n' and domain = '%d' So drop in my configuration, (which is working on another server identical to this one.) [grufftech@outgoing ~]# /etc/init.d/dovecot start Starting Dovecot Imap: [ OK ] Sweet. Booted up nicely, thats good.... (incoming problem in 3....2....1....) May 21 08:09:01 outgoing dovecot: Dovecot v1.0.7 starting up May 21 08:09:02 outgoing dovecot: auth-worker(default): mysql: Connect failed to 10.0.32.159 (mail): Can't connect to MySQL server on '10.0.32.159' (13) - waiting for 1 seconds before retry well what the crap. went and checked permissions on my MySQL database, and its fine. [grufftech@outgoing ~]# mysql vpopmail -h 10.0.32.159 -u ****** -p Enter password: Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 127828558 Server version: 4.1.22 Type 'help;' or '\h' for help. Type '\c' to clear the buffer. mysql>\q So! My server can talk to my database server. but dovecot, for whatever reason, isn't able to. I've fiddled with it for the last six hours, grabbed slightly-older copies of the RPM (ones that matched our production server exactly) to test those, copied configs, searched google, searched server fault, chatted in IRC, banged my head against the table, I've done it all. Surely I'm doing something wrong or forgetting something, can anyone tell me what the elephant in the room is? This stuff is supposed to work.

  Read the article

• Networking issues with Linux server (CentOS 5.3)

  - by sxanness

  I have a Linux server hosting our bug tracking software (CentOS 5.2 Kernel 2.6.18-128.4.1.el5) that I have having some strange network problems with. The machine is configured with two NICS, one for the public interface and the other for our server back end network. The problem is that after doing a service network restart I can ping the public interface and it sends anywhere from 200-500 ICMP packets and then all of a sudden I start getting a request timed out error. Strange but as soon as I connect to the private interface the ping starts working again to the public interface. I clearly have a routing issue somewhere. I have a Juniper Router with the following configuration. Interface 0/0 -- Connect subnet to the ISP at our co-location Interface 0/2 -- For our DRAC network Interface 0/3 -- The Server-backend network (plugs directly into a switch that feeds to all the NICs that are on the 10.3.20.x network. Interface 0/4 -- Plugs directly into another switch that feeds our public interfaces, that interface as all the gateways from our public ip rangs as secondary IP addresses. I hope that someone can ask the right questions that can lead me to check things and figure out what is going on. Has anyone had similar problems and what kind of things should I be checking? Routing issue or something even more complicated? [root@fogbugz ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0 # Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ DEVICE=eth0 BOOTPROTO=static IPADDR=72.249.134.98 NETMASK=255.255.255.248 BROADCAST=72.249.134.103 HWADDR=00:16:3E:AA:BB:EE ONBOOT=yes [root@fogbugz ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth1 # Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ DEVICE=eth1 BOOTPROTO=static BROADCAST=10.3.20.255 HWADDR=00:17:3E:AA:BB:EE IPADDR=10.3.20.25 NETMASK=255.255.255.0 NETWORK=10.3.20.0 ONBOOT=yes [root@fogbugz ~]# cat /etc/sysconfig/network NETWORKING=yes NETWORKING_IPV6=no HOSTNAME=fogbugz.dfw.hisg-it.net GATEWAY=72.249.134.97 [root@fogbugz ~]# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 72.249.134.96 0.0.0.0 255.255.255.248 U 0 0 0 eth0 10.3.20.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 10.0.0.0 10.3.20.1 255.0.0.0 UG 0 0 0 eth1 0.0.0.0 72.249.134.97 0.0.0.0 UG 0 0 0 eth0

  Read the article

• Networking issues with Linux server (CentOS 5.3)

  - by sxanness

  I have a Linux server hosting our bug tracking software (CentOS 5.2 Kernel 2.6.18-128.4.1.el5) that I have having some strange network problems with. The machine is configured with two NICS, one for the public interface and the other for our server back end network. The problem is that after doing a service network restart I can ping the public interface and it sends anywhere from 200-500 ICMP packets and then all of a sudden I start getting a request timed out error. Strange but as soon as I connect to the private interface the ping starts working again to the public interface. I clearly have a routing issue somewhere. I have a Juniper Router with the following configuration. Interface 0/0 -- Connect subnet to the ISP at our co-location Interface 0/2 -- For our DRAC network Interface 0/3 -- The Server-backend network (plugs directly into a switch that feeds to all the NICs that are on the 10.3.20.x network. Interface 0/4 -- Plugs directly into another switch that feeds our public interfaces, that interface as all the gateways from our public ip rangs as secondary IP addresses. I hope that someone can ask the right questions that can lead me to check things and figure out what is going on. Has anyone had similar problems and what kind of things should I be checking? Routing issue or something even more complicated? [root@fogbugz ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0 # Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ DEVICE=eth0 BOOTPROTO=static IPADDR=72.249.134.98 NETMASK=255.255.255.248 BROADCAST=72.249.134.103 HWADDR=00:16:3E:AA:BB:EE ONBOOT=yes [root@fogbugz ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth1 # Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ DEVICE=eth1 BOOTPROTO=static BROADCAST=10.3.20.255 HWADDR=00:17:3E:AA:BB:EE IPADDR=10.3.20.25 NETMASK=255.255.255.0 NETWORK=10.3.20.0 ONBOOT=yes [root@fogbugz ~]# cat /etc/sysconfig/network NETWORKING=yes NETWORKING_IPV6=no HOSTNAME=fogbugz.dfw.hisg-it.net GATEWAY=72.249.134.97 [root@fogbugz ~]# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 72.249.134.96 0.0.0.0 255.255.255.248 U 0 0 0 eth0 10.3.20.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 10.0.0.0 10.3.20.1 255.0.0.0 UG 0 0 0 eth1 0.0.0.0 72.249.134.97 0.0.0.0 UG 0 0 0 eth0

  Read the article

• Virtual Machine with Bridged Adapter to Centos not accepting ssh from host machine [migrated]

  - by javadba

  I have a bridged connection on VirtualBox from os/x 10.8.5 host to Centos 5.8 client. But I suspect this is more of a general issue than specific to the host and precise version of linux. Shown below are the networking info from the VirtualBox and from within the guest sshd is running on port 22: [root@oracle-linux ~]# ps -ef | grep sshd | grep -v grep root 3103 1 0 20:22 ? 00:00:00 /usr/sbin/sshd root 14994 3103 0 21:23 ? 00:00:00 sshd: root@pts/1 Port 22 listening: [root@oracle-linux ~]# netstat -an | grep 22 | grep tcp | grep LIST tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:2207 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:2208 0.0.0.0:* LISTEN tcp 0 0 :::22 :::* LISTEN Here are ip addresses, still on the guest os: [root@oracle-linux ~]# ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 08:00:27:b9:e5:79 brd ff:ff:ff:ff:ff:ff inet 10.0.15.100/24 brd 10.0.15.255 scope global eth0 inet6 fe80::a00:27ff:feb9:e579/64 scope link valid_lft forever preferred_lft forever 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 08:00:27:b4:86:8a brd ff:ff:ff:ff:ff:ff inet 10.0.3.15/24 brd 10.0.3.255 scope global eth1 inet6 fe80::a00:27ff:feb4:868a/64 scope link valid_lft forever preferred_lft forever [root@oracle-linux ~]# I can ssh to the guest from the guest: root@oracle-linux ~]# ssh 10.0.3.15 The authenticity of host '10.0.3.15 (10.0.3.15)' can't be established. RSA key fingerprint is ef:08:19:72:95:4d:e5:28:af:f3:6f:54:07:84:ba:04. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '10.0.3.15' (RSA) to the list of known hosts. [email protected]'s password: Last login: Mon Oct 21 21:24:12 2013 from 10.0.15.100 But can NOT ssh from the host to the guest: 18:27:04/shared:11 $ssh [email protected] ssh: connect to host 10.0.15.100 port 22: Operation timed out lost connection Here is bridged connection infO; BTW I looked into other answers, and one of them mentioned doing service iptables stop That did not help. Adapter 2 is a NAT, shown below In case NAT is causing any issues, i shut it down and restarted networking. [root@oracle-linux ~]# /etc/init.d/network restart Shutting down interface eth0: [ OK ] Shutting down interface eth1: Still No joy.. 18:27:04/shared:11 $ssh [email protected] ssh: connect to host 10.0.15.100 port 22: Operation timed out lost connection

  Read the article

• CentOS 5.7 keeps rebooting after fresh installation

  - by Wagner Maestrelli

  I have just installed CentOS 5.7 x86_64 on a new computer. The installation went on without any issues. But, after it finnished, the machine started to show an awkward behaviour: it restarts every time it tries to boot. It happens after all the services have been started. The screen just goes black and it shows an error message from the monitor: Input not supported. And then it reboots. I took a look at the logs, but I couldn't manage to find anything. Any help? Update Before doing the hardware diagnosis, as pointed out, I decided to make some tests. First, I changed the runlevel to 3, adding the 3 parameter at the end of the kernel command. Then, after logging in in text mode, I checked the xorg.conf file out for some problems regarding the screen resolution. There was nothing unexpected set. Well, if there had to be a problem with it, I couldn't start the X server at the command line, right? So, I typed startx and Gnome started! So, probably, it's not an issue with the screen resolution, I suppose. Then I selected the Log Out root... Gnome menu option and something odd happened: the screen went black, the Input not supported monitor error message was displayed and the system rebooted. Yes, the same problem I was having while trying to boot! After that, I decided to try yet another test: I removed the rhgb quiet parameters from the kernel command to see if some error would show up. Well, to my surprise, the boot went on without problems! The Gnome login screen showed up, I logged in and the session started. But then I selected the Shut Down... menu option and guess what? Same problem: black screen, same monitor error and the system rebooted. Yes, it rebooted, it did not shut down. I repeated both of the tests and the behaviours were the same. I really don't know what's going on. It seems to be an issue regarding the changing of the screen mode or something like that. Any ideas? Could this be a hardware problem? Or does it seem to be something regarding the system configuration?

  Read the article

• Virtual Machine with Bridged Adapter to Centos not accepting ssh from host machine

  - by javadba

  I have a bridged connection on VirtualBox from os/x 10.8.5 host to Centos 5.8 client. But I suspect this is more of a general issue than specific to the host and precise version of linux. Shown below are the networking info from the VirtualBox and from within the guest sshd is running on port 22: [root@oracle-linux ~]# ps -ef | grep sshd | grep -v grep root 3103 1 0 20:22 ? 00:00:00 /usr/sbin/sshd root 14994 3103 0 21:23 ? 00:00:00 sshd: root@pts/1 Port 22 listening: [root@oracle-linux ~]# netstat -an | grep 22 | grep tcp | grep LIST tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:2207 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:2208 0.0.0.0:* LISTEN tcp 0 0 :::22 :::* LISTEN Here are ip addresses, still on the guest os: [root@oracle-linux ~]# ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 08:00:27:b9:e5:79 brd ff:ff:ff:ff:ff:ff inet 10.0.15.100/24 brd 10.0.15.255 scope global eth0 inet6 fe80::a00:27ff:feb9:e579/64 scope link valid_lft forever preferred_lft forever 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 08:00:27:b4:86:8a brd ff:ff:ff:ff:ff:ff inet 10.0.3.15/24 brd 10.0.3.255 scope global eth1 inet6 fe80::a00:27ff:feb4:868a/64 scope link valid_lft forever preferred_lft forever [root@oracle-linux ~]# I can ssh to the guest from the guest: root@oracle-linux ~]# ssh 10.0.3.15 The authenticity of host '10.0.3.15 (10.0.3.15)' can't be established. RSA key fingerprint is ef:08:19:72:95:4d:e5:28:af:f3:6f:54:07:84:ba:04. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '10.0.3.15' (RSA) to the list of known hosts. [email protected]'s password: Last login: Mon Oct 21 21:24:12 2013 from 10.0.15.100 But can NOT ssh from the host to the guest: 18:27:04/shared:11 $ssh [email protected] ssh: connect to host 10.0.15.100 port 22: Operation timed out lost connection Here is bridged connection infO; BTW I looked into other answers, and one of them mentioned doing service iptables stop That did not help. Adapter 2 is a NAT, shown below In case NAT is causing any issues, i shut it down and restarted networking. [root@oracle-linux ~]# /etc/init.d/network restart Shutting down interface eth0: [ OK ] Shutting down interface eth1: Still No joy.. 18:27:04/shared:11 $ssh [email protected] ssh: connect to host 10.0.15.100 port 22: Operation timed out lost connection

  Read the article

• Download - Upload is too slow on Centos

  - by Mehdi

  My download/upload in server and out of server is too slow (around 50 KB/s !) ! Did I miss some configuration ? Some information: CentOS release 6.3 uptime load average: 0.17, 0.32, 0.37 Memory free -m total used free shared buffers cached Mem: 24009 21988 2021 0 806 18098 -/+ buffers/cache: 3083 20926 Swap: 4095 28 4067 lshw -C network *-network description: Ethernet interface product: 82574L Gigabit Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 00 serial: 00:25:90:70:17:4a size: 100MB/s capacity: 1GB/s width: 32 bits clock: 33MHz capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=off broadcast=yes driver=e1000e driverversion=1.9.5-k duplex=full firmware=2.1-2 ip=108.175.8.123 latency=0 link=yes multicast=yes port=twisted pair speed=100MB/s resources: irq:16 memory:fb900000-fb91ffff ioport:e000(size=32) memory:fb920000-fb923fff ethtool ethtool eth0 Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Speed: 100Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: off MDI-X: off Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000001 (1) Link detected: yes dmesg |grep e1000e dmesg |grep e1000e e1000e: Intel(R) PRO/1000 Network Driver - 1.9.5-k e1000e: Copyright(c) 1999 - 2012 Intel Corporation. e1000e 0000:02:00.0: Disabling ASPM L0s e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 e1000e 0000:02:00.0: setting latency timer to 64 e1000e 0000:02:00.0: irq 33 for MSI/MSI-X e1000e 0000:02:00.0: irq 34 for MSI/MSI-X e1000e 0000:02:00.0: irq 35 for MSI/MSI-X e1000e 0000:02:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:70:17:4a e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection e1000e 0000:02:00.0: eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e 0000:02:00.0: eth0: Unsupported Speed/Duplex configuration e1000e: eth0 NIC Link is Up 10 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e 0000:02:00.0: Disabling ASPM L1 e1000e 0000:02:00.0: eth0: changing MTU from 1500 to 9000 e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO

  Read the article

• Authenticate by libpam-mysql and libnss-mysql (CentOS)

  - by Chris

  I'm trying to get MySQL to function as a backend for authenticating users on CentOS 6.3. So far I have successfully installed and configured libnss-mysql. I can test this by doing: # groups testuser testuser : sftp Testuser is a member of the sftp group in fact, all MySQL based useraccounts will be hardcoded to it. The sftp group is chrooted and forced to use internal-sftp so they cannot do anything but access their home directory. Then I configured pam-mysql and PAM to allow mysql logins. This also works.. When SELinux is not enforcing. When I do setenforce 1 users can no longer login. Error: Permission denied, please try again. This is my pam_mysql.conf file: users.host=localhost users.db_user=nss-pam-user users.db_passwd=*********** users.database=sftpusers users.table=users users.user_column=username users.password_column=password users.password_crypt=6 verbose=1 My /etc/pam.d/sshd: #%PAM-1.0 auth sufficient pam_sepermit.so auth include password-auth auth required pam_mysql.so config_file=/etc/pam_mysql.conf account sufficient pam_nologin.so account include password-auth account required pam_mysql.so config_file=/etc/pam_mysql.conf password include password-auth # pam_selinux.so close should be the first session rule session required pam_selinux.so close session required pam_loginuid.so # pam_selinux.so open should only be followed by sessions to be executed in the user context session required pam_selinux.so open env_params session optional pam_keyinit.so force revoke session include password-auth And to be complete the contents of some log files.. /var/logs/secure Nov 20 14:52:20 hostname unix_chkpwd[4891]: check pass; user unknown Nov 20 14:52:20 hostname unix_chkpwd[4891]: password check failed for user (testuser) Nov 20 14:52:20 hostname sshd[4880]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=192.168.10.107 user=testuser Nov 20 14:52:22 sftpusers sshd[4880]: Failed password for testuser from 192.168.10.107 port 51849 ssh2 /var/logs/audit/audit.log type=USER_AUTH msg=audit(1353420107.070:812): user pid=5285 uid=0 auid=500 ses=24 subj=unconfined_u:system_r:sshd_t:s0-s0:c0.c1023 msg='op=pubkey acct="testuser" exe="/usr/sbin/sshd" hostname=? addr=192.168.10.107 terminal=ssh res=failed' type=USER_AUTH msg=audit(1353420112.312:813): user pid=5285 uid=0 auid=500 ses=24 subj=unconfined_u:system_r:sshd_t:s0-s0:c0.c1023 msg='op=PAM:authentication acct="testuser" exe="/usr/sbin/sshd" hostname=192.168.10.107 addr=192.168.10.107 terminal=ssh res=failed' type=USER_AUTH msg=audit(1353420112.456:814): user pid=5285 uid=0 auid=500 ses=24 subj=unconfined_u:system_r:sshd_t:s0-s0:c0.c1023 msg='op=password acct="testuser" exe="/usr/sbin/sshd" hostname=? addr=192.168.10.107 terminal=ssh res=failed' I tried to let audit2why explain the problem but it remains silent even though there are some errors. Does anyone see the problem? Thanks! EDIT: Turns out it's almost working with setenforce 0 I can mkdir foobar but if I do a single ls I get an error: Received message too long 16777216

  Read the article

• Disk IO causing high load on Xen/CentOS guest

  - by Peter Lindqvist

  I'm having serious issues with a xen based server, this is on the guest partition. It's a paravirtualized CentOS 5.5. The following numbers are taken from top while copying a large file over the network. If i copy the file another time the speed decreases in relation to load average. So the second time it's half the speed of the first time. It needs some time to cool off after this. Load average slowly decreases until it's once again usable. ls / takes about 30 seconds. top - 13:26:44 up 13 days, 21:44, 2 users, load average: 7.03, 5.08, 3.15 Tasks: 134 total, 2 running, 132 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.1%sy, 0.0%ni, 25.3%id, 74.5%wa, 0.0%hi, 0.0%si, 0.1%st Mem: 1048752k total, 1041460k used, 7292k free, 3116k buffers Swap: 2129912k total, 40k used, 2129872k free, 904740k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1506 root 10 -5 0 0 0 S 0.3 0.0 0:03.94 cifsd 1 root 15 0 2172 644 556 S 0.0 0.1 0:00.08 init Meanwhile the host is ~0.5 load avg and steady over time. ~50% wait Server hardware is dual xeon, 3gb ram, 170gb scsi 320 10k rpm, and shouldn't have any problems with copying files over the network. disk = [ "tap:aio:/vm/dev01.img,xvda,w" ] I also get these in the log INFO: task syslogd:1350 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. syslogd D 00062E4F 2208 1350 1 1353 1312 (NOTLB) c0ef0ed0 00000286 6e71a411 00062e4f c0ef0f18 00000009 c0f20000 6e738bfd 00062e4f 0001e7ec c0f2010c c181a724 c1abd200 00000000 ffffffff c0ef0ecc c041a180 00000000 c0ef0ed8 c03d6a50 00000000 00000000 c03d6a00 00000000 Call Trace: [<c041a180>] __wake_up+0x2a/0x3d [<ee06a1ea>] log_wait_commit+0x80/0xc7 [jbd] [<c043128b>] autoremove_wake_function+0x0/0x2d [<ee065661>] journal_stop+0x195/0x1ba [jbd] [<c0490a32>] __writeback_single_inode+0x1a3/0x2af [<c04568ea>] do_writepages+0x2b/0x32 [<c045239b>] __filemap_fdatawrite_range+0x66/0x72 [<c04910ce>] sync_inode+0x19/0x24 [<ee09b007>] ext3_sync_file+0xaf/0xc4 [ext3] [<c047426f>] do_fsync+0x41/0x83 [<c04742ce>] __do_fsync+0x1d/0x2b [<c0405413>] syscall_call+0x7/0xb ======================= I have tried disabling irqbalanced as suggested here but it does not seem to make any difference.

  Read the article

• eAccelerator settings for PHP/Centos/Apache

  - by bobbyh

  I have eAccelerator installed on a server running Wordpress using PHP/Apache on CentOS. I am occassionally getting persistent "white pages", which presumably are PHP Fatal Errors (although these errors don't appear in my error_log). These "white pages" are sprinkled here and there throughout the site. They persist until I go to my eAccelerator control.php page and clear/clean/purge my caches, which suggests to me that I've configured eAccelerator improperly. Here are my current /etc/php.ini settings: memory_limit = 128M; eaccelerator.shm_size="64", where shm.size is "the amount of shared memory eAccelerator should allocate to cache PHP scripts" (see http://eaccelerator.net/wiki/Settings) eaccelerator.shm_max="0", where shm_max is "the maximum size a user can put in shared memory with functions like eaccelerator_put ... The default value is "0" which disables the limit" eaccelerator.shm_ttl="0" - "When eAccelerator doesn't have enough free shared memory to cache a new script it will remove all scripts from shared memory cache that haven't been accessed in at least shm_ttl seconds. By default this value is set to "0" which means that eAccelerator won't try to remove any old scripts from shared memory." eaccelerator.shm_prune_period="0" - "When eAccelerator doesn't have enough free shared memory to cache a script it tries to remove old scripts if the previous try was made more then "shm_prune_period" seconds ago. Default value is "0" which means that eAccelerator won't try to remove any old script from shared memory." eaccelerator.keys = "shm_only" - "These settings control the places eAccelerator may cache user content. ... 'shm_only' cache[s] data in shared memory" On my phpinfo page, it says: memory_limit 128M Version 0.9.5.3 and Caching Enabled true On my eAccelerator control.php page, it says 64 MB of total RAM available Memory usage 77.70% (49.73MB/ 64.00MB) 27.6 MB is used by cached scripts in the PHP opcode cache (I added up the file sizes myself) 22.1 MB is used by the cache keys, which is populated by the Wordpress object cache. My questions are: Is it true that there is only 36.4 MB of room in the eAccelerator cache for total "cache keys" (64 MB of total RAM minus whatever is taken by cached scripts, which is 27.6 MB at the moment)? What happens if my app tries to write more than 22.1 MB of cache keys to the eAccelerator memory cache? Does this cause eAccelerator to go crazy, like I've seen? If I change eaccelerator.shm_max to be equal to (say) 32 MB, would that avoid this problem? Do I also need to change shm_ttl and shm_prune_period to make eAccelerator respect the MB limit set by shm_max? Thanks! :-)

  Read the article

• Ping Unknown Host on CentOS at EC2

  - by organicveggie

  Weird problem. We have a collection of servers running CentOS 5 on EC2. The setup includes two DNS servers and two LDAP servers. DNS has a CNAME pointing at the primary LDAP server. One machine (and only one machine) is giving me problems. I can ssh into the server using LDAP authentication. But once I'm on the machine, ping won't resolve the LDAP host even though DNS seems to work fine. Here's ping: $ ping ldap.mycompany.ec2 ping: unknown host ldap.mycompany.ec2 Here's the output of dig: $ dig ldap.mycompany.ec2 ; <<>> DiG 9.3.6-P1-RedHat-9.3.6-4.P1.el5_5.3 <<>> ldap.studyblue.ec2 ;; global options: printcmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 2893 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 2, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;ldap.mycompany.ec2. IN A ;; ANSWER SECTION: ldap.mycompany.ec2. 3600 IN CNAME ec2-hostname.compute-1.amazonaws.com. ec2-hostname.compute-1.amazonaws.com. 55 IN A aaa.bbb.ccc.ddd ;; Query time: 12 msec ;; SERVER: 10.32.159.xxx#53(10.32.159.xxx) ;; WHEN: Tue May 31 11:16:30 2011 ;; MSG SIZE rcvd: 107 And here is resolv.conf: $ cat /etc/resolv.conf search mycompany.ec2 nameserver 10.32.159.xxx nameserver 10.244.19.yyy And here is my hosts file: $ cat /etc/hosts 10.122.15.zzz bamboo4 bamboo4.mycompany.ec2 127.0.0.1 localhost localhost.localdomain And here's nsswitch.conf $ cat /etc/nsswitch.conf passwd: files ldap shadow: files ldap group: files ldap sudoers: ldap files hosts: files dns bootparams: nisplus [NOTFOUND=return] files ethers: files netmasks: files networks: files protocols: files rpc: files services: files netgroup: files ldap publickey: nisplus automount: files ldap aliases: files nisplus So DNS works the way I would expect. And I can ping the ldap server by ip address. And I can even access the box with SSH using LDAP authentication. Any suggestions?

  Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >