Search Results

Search found 24865 results on 995 pages for 'default route'.

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

Page 14/995 | < Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >

  • Route forwarded traffic through eth0 but local traffic through tun0

    - by Ross Patterson
    I have a Ubuntu 12.04/Zentyal 2.3 server configured with WAN NATed on eth0, local interfaces eth1 and wlan0 bridged on br1 on which DHCP runs, and an OpenVPN connection on tun0. I only need the VPN for some things running on the gateway itself and I need to make sure that everything running on the gateway goes through the VPNs tun0. root:~# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default gw... 0.0.0.0 UG 100 0 0 eth0 link-local * 255.255.0.0 U 1000 0 0 br1 192.168.1.0 * 255.255.255.0 U 0 0 0 br1 A.B.C.0 * 255.255.255.0 U 0 0 0 eth0 root:~# ip route 169.254.0.0/16 dev br1 scope link metric 1000 192.168.1.0/24 dev br1 proto kernel scope link src 192.168.1.1 A.B.C.0/24 dev eth0 proto kernel scope link src A.B.C.186 root:~# ip route show table main 169.254.0.0/16 dev br1 scope link metric 1000 192.168.1.0/24 dev br1 proto kernel scope link src 192.168.1.1 A.B.C.0/24 dev eth0 proto kernel scope link src A.B.C.D root:~# ip route show table default default via A.B.C.1 dev eth0 How can I configure routing (or otherwise) such that all forwarded traffic for other hosts on the LAN goes through eth0 but all traffic for the gateway itself goes through the VPN on tun0? Also, since the OpenVPN client changes routing on startup/shutdown, how can I make sure that everything running on the gateway itself loses all network access if the VPN goes down and never goes out eth0.

    Read the article

  • How to set a static route for an external IP address

    - by HorusKol
    Further to my earlier question about bridging different subnets - I now need to route requests for one particular IP address differently to all other traffic. I have the following routing in my iptables on our router: # Allow established connections, and those !not! coming from the public interface # eth0 = public interface # eth1 = private interface #1 (10.1.1.0/24) # eth2 = private interface #2 (129.2.2.0/25) iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A INPUT -m state --state NEW ! -i eth0 -j ACCEPT iptables -A FORWARD -i eth0 -o eth1 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -i eth0 -o eth2 -m state --state ESTABLISHED,RELATED -j ACCEPT # Allow outgoing connections from the private interfaces iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT iptables -A FORWARD -i eth2 -o eth0 -j ACCEPT # Allow the two private connections to talk to each other iptables -A FORWARD -i eth1 -o eth2 -j ACCEPT iptables -A FORWARD -i eth2 -o eth1 -j ACCEPT # Masquerade (NAT) iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE # Don't forward any other traffic from the public to the private iptables -A FORWARD -i eth0 -o eth1 -j REJECT iptables -A FORWARD -i eth0 -o eth2 -j REJECT This configuration means that users will be forwarded through a modem/router with a public address - this is all well and good for most purposes, and in the main it doesn't matter that all computers are hidden behind the one public IP. However, some users need to be able to access a proxy at 192.111.222.111:8080 - and the proxy needs to identify this traffic as coming through a gateway at 129.2.2.126 - it won't respond otherwise. I tried adding a static route on our local gateway with: route add -host 192.111.222.111 gw 129.2.2.126 dev eth2 I can successfully ping 192.111.222.111 from the router. When I trace the route, it lists the 129.2.2.126 gateway, but I just get * on each of the following hops (I think this makes sense since this is just a web-proxy and requires authentication). When I try to ping this address from a host on the 129.2.2.0/25 network it fails. Should I do this in the iptables chain instead? How would I configure this routing?

    Read the article

  • How To Restore Firefox Options To Default Without Uninstalling

    - by Gopinath
    Firefox plugins are awesome and they are the pillars for the huge success of Firefox browser. Plugins vary from simple ones like changing color scheme of the browser to powerful ones likes changing the behavior of the browser itself. Recently I installed one of the powerful Firefox plugins and played around to tweak the behavior of the browser. At the end of my half an hour play, Firefox has completely become useless and stopped rending web pages properly. To continue using Firefox I had to restore it to default settings. But I don’t like to uninstall and then install it again as it’s a time consuming process and also I’ll loose all the plugins I’m using. How did I restore the default settings in a single click? Default Settings Restore Through Safe Mode Options It’s very easy to restore default settings of Firefox with the safe mode options. All we need to do is 1.  Close all the Firefox browser windows that are open 2. Launch Firefox in safe mode 3. Choose the option Reset all user preferences to Firefox defaults 4. Click on Make Changes and Restart button. Note: When Firefox restore the default settings, it erases all the stored passwords, browser history and other settings you have done. That’s all. This excellent feature of Firefox saved me from great pain and hope it’s going to help you too. Join us on Facebook to read all our stories right inside your Facebook news feed.

    Read the article

  • How To Restore Firefox Options To Default Without Uninstalling

    - by Gopinath
    Firefox plugins are awesome and they are the pillars for the huge success of Firefox browser. Plugins vary from simple ones like changing color scheme of the browser to powerful ones likes changing the behavior of the browser itself. Recently I installed one of the powerful Firefox plugins and played around to tweak the behavior of the browser. At the end of my half an hour play, Firefox has completely become useless and stopped rending web pages properly. To continue using Firefox I had to restore it to default settings. But I don’t like to uninstall and then install it again as it’s a time consuming process and also I’ll loose all the plugins I’m using. How did I restore the default settings in a single click? Default Settings Restore Through Safe Mode Options It’s very easy to restore default settings of Firefox with the safe mode options. All we need to do is 1.  Close all the Firefox browser windows that are open 2. Launch Firefox in safe mode 3. Choose the option Reset all user preferences to Firefox defaults 4. Click on Make Changes and Restart button. Note: When Firefox restore the default settings, it erases all the stored passwords, browser history and other settings you have done. That’s all. This excellent feature of Firefox saved me from great pain and hope it’s going to help you too. Join us on Facebook to read all our stories right inside your Facebook news feed.

    Read the article

  • Customize the Default Screensavers in Windows 7 and Vista

    - by Matthew Guay
    Windows 7 and Vista include a nice set of backgrounds, but unfortunately most of them aren’t configurable by default.  Thanks to a free app and some registry changes, however, you can make the default screensavers uniquely yours! Customize the default screensavers If you’ve ever pressed the Customize button on most of the default screensavers in Windows 7 and Vista, you were probably greeted with this message: A little digging in the registry shows that this isn’t fully correct.  The default screensavers in Vista and 7 do have options you can set, but they’re not obvious.  With the help of an app or some registry tips, you can easily customize the screensavers to be uniquely yours.  Here’s how you can do it with an app or in the registry. Customize Windows Screensavers with System Screensavers Tweaker Download the System Screensavers Tweaker (link below), and unzip the folder.  Run nt6srccfg.exe in the folder to tweak your screensavers.  This application lets you tweak the screensavers’ registry settings graphically, and it works great in all editions of Windows Vista and 7, including x64 versions. Change any of the settings you want in the screensaver tweaker, and click Apply. To preview the changes to your screensaver, open the Screen Saver settings window as normal by right-clicking on the desktop, and selecting Personalize. Click on the Screensaver button on the bottom right. Now, select your modified screensaver, and click Preview to see your changes. You can change a wide variety of settings for the Bubbles, Ribbons, and Mystify screensavers in Windows 7 and Vista, as well as the Aurora screensaver in Windows Vista.  The tweaks to the Bubbles screensaver are especially nice.  Here’s how the Bubbles look without transparency. And, by tweaking a little more, you get a screensaver that looks more like a screen full of marbles. Ribbons and Mystify each have less settings, but still can produce some unique effects.   How’s that for a brilliant screensaver? And, if you want to return your screensavers to their default settings, simply run the System Screensavers Tweaker and select Reset to defaults on any screensaver you wish to reset. Customize Windows Screensavers in the Registry If you prefer to roll up your sleeves and tweak Windows under-the-hood, then here’s how you can customize the screensavers yourself in the Registry.  Type regedit into the search box in the Start menu, browse to the key for each screensaver, and add or modify the DWORD values listed for that screensaver using the Decimal base. Please Note: Tweaking the Registry can be difficult, so if you’re unsure, just use the tweaking application above. Also, you’ll probably want to create a System Restore Point.   Bubbles To edit the Bubbles screensaver, browse to the following in regedit: HKEY_CURRENT_USER\Software\Microsoft\Windows\Current Version\Screensavers\Bubbles Now, add or modify the following DWORD values to tweak the screensaver: MaterialGlass – enter 0 for solid or 1 for transparent bubbles Radius – enter a number between 1090000000 and 1130000000; the larger the number, the larger the bubbles’ radius ShowBubbles – enter 0 to show a black background or 1 to show the current desktop behind the bubbles ShowShadows – enter 0 for no shadow or 1 for shadows behind the bubbles SphereDensity – enter a number from 1000000000 to 2100000000; the higher the number, the more bubbles on the screen. TurbulenceNumOctaves – enter a number from 1 to 255; the higher the number, the faster the bubble colors will change. Ribbons To edit the Ribbons screensaver, browse to the following in regedit: HKEY_CURRENT_USER\Software\Microsoft\Windows\Current Version\Screensavers\Ribbons Now, add or modify the following DWORD values to tweak the screensaver: Blur – enter 0 to prevent ribbons from fading, or 1 to have them fade away after a few moments. Numribbons – enter a number from 1 to 100; the higher the number, the more ribbons on the screen. RibbonWidth – enter a number from 1000000000 to 1080000000; the higher the number, the thicker the ribbons. Mystify To edit the Mystify screensaver, browse to the following in regedit: HKEY_CURRENT_USER\Software\Microsoft\Windows\Current Version\Screensavers\Mystify Now, add or modify the following DWORD values to tweak the screensaver: Blur – enter 0 to prevent lines from fading, or 1 to have them fade away after a few moments. LineWidth – enter a number from 1000000000 to 1080000000; the higher the number, the wider the lines. NumLines – enter a number from 1 to 100; the higher the value, the more lines on the screen. Aurora – Windows Vista only To edit the Aurora screensaver in Windows Vista, browse to the following in regedit: HKEY_CURRENT_USER\Software\Microsoft\Windows\Current Version\Screensavers\Aurora Now, add or modify the following DWORD values to tweak the screensaver: Amplitude – enter a value from 500000000 to 2000000000; the higher the value, the slower the motion. Brightness – enter a value from 1000000000 to 1050000000; the higher the value, the brighter the affect. NumLayers – enter a value from 1 to 15; the higher the value, the more aurora layers displayed. Speed – enter a value from 1000000000 to 2100000000; the higher the value, the faster the cycling. Conclusion Although the default screensavers are nice, they can be boring after awhile with their default settings.  But with these tweaks, you can create a variety of vibrant screensavers that should keep your desktop fresh and interesting. Link Download the System Screensavers Tweaker Similar Articles Productive Geek Tips Create Icons to Start the Screensaver on Windows 7 or VistaMake Your Windows XP Logon Screen Look Like Windows VistaSpeed up Windows Vista Start Menu Search By Limiting ResultsRoundup: 16 Tweaks to Windows Vista Look & FeelSet XP as the Default OS in a Windows Vista Dual-Boot Setup TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 NachoFoto Searches Images in Real-time Office 2010 Product Guides Google Maps Place marks – Pizza, Guns or Strip Clubs Monitor Applications With Kiwi LocPDF is a Visual PDF Search Tool Download Free iPad Wallpapers at iPad Decor

    Read the article

  • MySql query optimization help

    - by rohitgu
    I have few queries and am not able to figure out how to optimize them, QUERY 1 select * from t_twitter_tracking where classified is null and tweetType='ENGLISH' order by id limit 500; QUERY 2 Select count(*) as cnt, DATE_FORMAT(CONVERT_TZ(wrdTrk.createdOnGMTDate,'+00:00','+05:30'),'%Y-%m-%d') as dat from t_twitter_tracking wrdTrk where wrdTrk.word like ('dell') and CONVERT_TZ(wrdTrk.createdOnGMTDate,'+00:00','+05:30') between '2010-12-12 00:00:00' and '2010-12-26 00:00:00' group by dat; Both these queries run on the same table, CREATE TABLE `t_twitter_tracking` ( `id` BIGINT(20) NOT NULL AUTO_INCREMENT, `word` VARCHAR(200) NOT NULL, `tweetId` BIGINT(100) NOT NULL, `twtText` VARCHAR(800) NULL DEFAULT NULL, `language` TEXT NULL, `links` TEXT NULL, `tweetType` VARCHAR(20) NULL DEFAULT NULL, `source` TEXT NULL, `sourceStripped` TEXT NULL, `isTruncated` VARCHAR(40) NULL DEFAULT NULL, `inReplyToStatusId` BIGINT(30) NULL DEFAULT NULL, `inReplyToUserId` INT(11) NULL DEFAULT NULL, `rtUsrProfilePicUrl` TEXT NULL, `isFavorited` VARCHAR(40) NULL DEFAULT NULL, `inReplyToScreenName` VARCHAR(40) NULL DEFAULT NULL, `latitude` BIGINT(100) NOT NULL, `longitude` BIGINT(100) NOT NULL, `retweetedStatus` VARCHAR(40) NULL DEFAULT NULL, `statusInReplyToStatusId` BIGINT(100) NOT NULL, `statusInReplyToUserId` BIGINT(100) NOT NULL, `statusFavorited` VARCHAR(40) NULL DEFAULT NULL, `statusInReplyToScreenName` TEXT NULL, `screenName` TEXT NULL, `profilePicUrl` TEXT NULL, `twitterId` BIGINT(100) NOT NULL, `name` TEXT NULL, `location` VARCHAR(100) NULL DEFAULT NULL, `bio` TEXT NULL, `url` TEXT NULL COLLATE 'latin1_swedish_ci', `utcOffset` INT(11) NULL DEFAULT NULL, `timeZone` VARCHAR(100) NULL DEFAULT NULL, `frenCnt` BIGINT(20) NULL DEFAULT '0', `createdAt` DATETIME NULL DEFAULT NULL, `createdOnGMT` VARCHAR(40) NULL DEFAULT NULL, `createdOnServerTime` DATETIME NULL DEFAULT NULL, `follCnt` BIGINT(20) NULL DEFAULT '0', `favCnt` BIGINT(20) NULL DEFAULT '0', `totStatusCnt` BIGINT(20) NULL DEFAULT NULL, `usrCrtDate` VARCHAR(200) NULL DEFAULT NULL, `humanSentiment` VARCHAR(30) NULL DEFAULT NULL, `replied` BIT(1) NULL DEFAULT NULL, `replyMsg` TEXT NULL, `classified` INT(32) NULL DEFAULT NULL, `createdOnGMTDate` DATETIME NULL DEFAULT NULL, `locationDetail` TEXT NULL, `geonameid` INT(11) NULL DEFAULT NULL, `country` VARCHAR(255) NULL DEFAULT NULL, `continent` CHAR(2) NULL DEFAULT NULL, `placeLongitude` FLOAT NULL DEFAULT NULL, `placeLatitude` FLOAT NULL DEFAULT NULL, PRIMARY KEY (`id`), INDEX `id` (`id`, `word`), INDEX `createdOnGMT_index` (`createdOnGMT`) USING BTREE, INDEX `word_index` (`word`) USING BTREE, INDEX `location_index` (`location`) USING BTREE, INDEX `classified_index` (`classified`) USING BTREE, INDEX `tweetType_index` (`tweetType`) USING BTREE, INDEX `getunclassified_index` (`classified`, `tweetType`) USING BTREE, INDEX `timeline_index` (`word`, `createdOnGMTDate`, `classified`) USING BTREE, INDEX `createdOnGMTDate_index` (`createdOnGMTDate`) USING BTREE, INDEX `locdetail_index` (`country`, `id`) USING BTREE, FULLTEXT INDEX `twtText_index` (`twtText`) ) COLLATE='utf8_general_ci' ENGINE=MyISAM ROW_FORMAT=DEFAULT AUTO_INCREMENT=12608048; The table has more than 10 million records. How can I optimize it?

    Read the article

  • SharePoint 2010 Hosting :: Setting Default Column Values on a Folder Programmatically

    - by mbridge
    The reason I write this post today is because my initial searches on the Internet provided me with nothing on the topic.  I was hoping to find a reference to the SDK but I didn’t have any luck.  What I want to do is set a default column value on an existing folder so that new items in that folder automatically inherit that value.  It’s actually pretty easy to do once you know what the class is called in the API.  I did some digging and discovered that class is MetadataDefaults. It can be found in Microsoft.Office.DocumentManagement.dll.  Note: if you can’t find it in the GAC, this DLL is in the 14/CONFIG/BIN folder and not the 14/ISAPI folder.  Add a reference to this DLL in your project.  In my case, I am building a console application, but you might put this in an event receiver or workflow. In my example today, I have simple custom folder and document content types.  I have one shared site column called DocumentType.  I have a document library which each of these content types registered.  In my document library, I have a folder named Test and I want to set its default column values using code.  Here is what it looks like.  Start by getting a reference to the list in question.  This assumes you already have a SPWeb object.  In my case I have created it and it is called site. SPList customDocumentLibrary = site.Lists["CustomDocuments"]; You then pass the SPList object to the MetadataDefaults constructor. MetadataDefaults columnDefaults = new MetadataDefaults(customDocumentLibrary); Now I just need to get my SPFolder object in question and pass it to the meethod SetFieldDefault.  This takes a SPFolder object, a string with the name of the SPField to set the default on, and finally the value of the default (in my case “Memo”). SPFolder testFolder = customDocumentLibrary.RootFolder.SubFolders["Test"]; columnDefaults.SetFieldDefault(testFolder, "DocumentType", "Memo"); You can set multiple defaults here.  When you’re done, you will need to call .Update(). columnDefaults.Update(); Here is what it all looks like together. using (SPSite siteCollection = new SPSite("http://sp2010/sites/ECMSource")) {     using (SPWeb site = siteCollection.OpenWeb())     {         SPList customDocumentLibrary = site.Lists["CustomDocuments"];         MetadataDefaults columnDefaults = new MetadataDefaults(customDocumentLibrary);          SPFolder testFolder = customDocumentLibrary.RootFolder.SubFolders["Test"];         columnDefaults.SetFieldDefault(testFolder, "DocumentType", "Memo");         columnDefaults.Update();     } } You can verify that your property was set correctly on the Change Default Column Values page in your list This is something that I could see used a lot on an ItemEventReceiver attached to a folder to do metadata inheritance.  Whenever, the user changed the value of the folder’s property, you could have it update the default.  Your code might look something columnDefaults.SetFieldDefault(properties.ListItem.Folder, "MyField", properties.ListItem[" This is a great way to keep the child items updated any time the value a folder’s property changes.  I’m also wondering if this can be done via CAML.  I tried saving a site template, but after importing I got an error on the default values page.  I’ll keep looking and let you know what I find out.

    Read the article

  • A Few Cool Things You Can Identify Using the Default Trace

    If you are running an instance of SQL Server 2005 and above then most likely that instance is running the default trace. This default trace is a canned Profiler server side trace that automatically starts up when SQL Server starts. In this article Greg Larsen explains more about the default trace and shows you how to glean some event information from the trace files created by this background trace process.

    Read the article

  • How to set default hreflangs for some languages?

    - by user1721135
    I want to make a site with different versions for 2 countries, which have the same language. Then I need to do the same for another language. Basically I want to have 6 versions of the site: UK English US English Default English ?? Austrian German Germany German Default German The question is, how do I define the "default" language versions, for any country with this language which isnt defined already? I know there is x-default, but I think you can only use that once and it is for all languages and all countries.

    Read the article

  • BSNL Routers: Default Username and Password To Access Admin Interface

    - by Gopinath
    Problem You have BSNL broadband set up at home and everything is working fine. But one fine day you something went wrong or you would like to change the properties of your BSNL modem by logging in to the admin user interface of your modem. What is the default username and password to login to BSNL Router user interface? Solution Here are the default username, password to access your BSNL router admin interface URL: http://192.168.1.1/ Username: admin Password: admin Note: The above username and password are the default ones that works with all the BSNL routers until unless someone has changed them. This article titled,BSNL Routers: Default Username and Password To Access Admin Interface, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

    Read the article

  • Lubuntu 14.04 Problem starting lxsession-default-apps

    - by user278179
    I have one problem, I can't execute lxsession-default-apps on Lubuntu 14.04 because I get because said to me "The database is updating, please wait" If I try to run lxsession-default-apps, I get this error: ** Message: utils.vala:30: config_path_directory: /home/USER/.config/lxsession-default-apps ** Message: desktop-files-backend.vala:171: test config_path: /home/USER/.config/lxsession-default-apps/settings.conf ** Message: desktop-files-backend.vala:237: Scanning folder: /usr/share/applications ** Message: desktop-files-backend.vala:278: Start scanning ** Message: desktop-files-backend.vala:257: Scanning folder: /usr/share/app-install/desktop ** Message: desktop-files-backend.vala:278: Start scanning Error: list_files failed: No such file or directory ** Message: desktop-files-backend.vala:333: Finishing scanning ** Message: desktop-files-backend.vala:189: Signal finish scanning with mode: write ** Message: desktop-files-backend.vala:333: Finishing scanning Any help would be appreciated. Thanks. Regards.

    Read the article

  • How to change default foreign language font

    - by preahkumpii
    I want to know how to change the default font that is used when inputting a particular language. I use the Khmer language frequently, and the default font installed comes from the fonts-khmeros-core package. The fonts are fine, except that there better fonts. Once I install my beloved font, how do I cause Ubuntu to use that font instead of the ones from the package? Additionally, if you remove the fonts-khmeros-core package, and have only the custom font installed, the custom font will not be used by default, even if no other Khmer fonts are installed. However, when you install that package, those fonts are immediately used by default. Any ideas? Thanks.

    Read the article

  • Automatically Reset Theme To Default, SharePoint 2010

    - by KunaalKapoor
    Manually/Through UIOn the top link bar, click Site Settings.On the Site Management page, in the Customization section, click Apply theme to site.On the Apply Theme to Web Site page, select No Theme(Default) from the list.Click Apply.Through Scriptfunction Apply-SPDefaultTheme([string]$SiteUrl, [string]$webName){$site = new-object Microsoft.SharePoint.SPSite($SiteUrl)$web = $site.OpenWeb($webName)$theme = [Microsoft.SharePoint.Utilities.ThmxTheme]::RemoveThemeFromWeb($web,$false)$web.Update()$web.Dispose()$site.Dispose()}After looking in the SPTHEMES.XML file found in the C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\LAYOUTS\1033 folder, you do see there is a theme with a theme name of "none". Since there is no "default" theme in 2010. So make sure if you wanna reset it to default you know that there is no default, you need to select 'none' :)

    Read the article

  • Maintaining SQL Server default trace historical events for analysis and reporting

    I often see questions online where someone wants to find out who started a trace, when tempdb last had an autogrow event, or when the last full backup for master occurred. Since these and other events are captured by the default trace, but the default trace only keeps five 20MB rollover files by default. This means that the event you are after may no longer be there, depending on how long ago it was and how busy your server happens to be. Unfortunately, people often need to find this information well after the fact.

    Read the article

  • How can I open Outlook Calendar to a 2-3 week view by default?

    - by Simon
    I use Outlook 2007, and I like to view my calendar 2 (or sometimes 3) weeks at a time. Its relatively easy to do, by dragging my mouse across several weeks in the mini calendar. BUT... it never stays that way. As soon as I change to Contacts and back to Calendar, the view resets to showing a whole month. Any ideas about how to change to default view?

    Read the article

  • I've set an editor as default, how do I call it to open files in a shell?

    - by iight
    EDIT I thought of a better way to phrase the question. How can I find the alias that Ubuntu is using for a different text editor? Rather than using nano by typing nano file.txt, i'd like to be able to type sublime file.txt to open sublime editor. I don't know where to look to find these aliases. sudo update-alternatives --config editor does not show it as a choice, I only see the 'default' editors, like Nano and vim.tiny.

    Read the article

  • Which registry keys need to be edited to change the default browser?

    - by paradroid
    Which registry keys need to be edited to change the default browser? I have found these keys so far and they seem to do what I want, but I am not sure if I have found all of them: Data in: HKEY_CURRENT_USER\Software\Classes\http\shell\open\command HKEY_CURRENT_USER\Software\Classes\https\shell\open\command HKEY_CURRENT_USER\Software\Classes\ftp\shell\open\command Value in: HKEY_CURRENT_USER\Software\Classes\Local Settings\Software\Microsoft\Windows\Shell\MuiCache Are there any other keys which would need to be changed, so that it is done perfectly?

    Read the article

  • ASA hairpining: I basicaly want to allow 2 spokes to be able to communicate with each other.

    - by Thirst4Knowledge
    ASA Spoke to Spoke Communication I have been looking at spke to spoke comms or "hairpining" for months and have posted on numerouse forums but to no avail. I have a Hub and spoke network where the HUB is an ASA Firewall version 8.2 * I basicaly want to allow 2 spokes to be able to communicate with each other. I think that I have got the concept of the ASA Config for example: same-security-traffic permit intra-interface access-list HQ-LAN extended permit ip ASA-LAN 255.255.248.0 HQ-LAN 255.255.255.0 access-list HQ-LAN extended permit ip 192.168.99.0 255.255.255.0 HQ-LAN 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 HQ-LAN 255.255.255.0 access-list no-nat extended permit ip HQ-LAN 255.255.255.0 192.168.99.0 255.255.255.0 access-list no-nat extended permit ip 192.168.99.0 255.255.255.0 HQ-LAN 255.255.255.0 I think my problem may be that the other spokes are not CIsco Firewalls and I need to work out how to do the alternative setups. I want to at least make sure that my firewall etup is correct then I can move onto the other spokes here is my config: Hostname ASA domain-name mydomain.com names ! interface Ethernet0/0 speed 100 duplex full nameif outside security-level 0 ip address 1.1.1.246 255.255.255.224 ! interface Ethernet0/1 speed 100 duplex full nameif inside security-level 100 ip address 192.168.240.33 255.255.255.224 ! interface Ethernet0/2 description DMZ VLAN-253 speed 100 duplex full nameif DMZ security-level 50 ip address 192.168.254.1 255.255.255.0 ! interface Ethernet0/3 no nameif no security-level no ip address ! boot system disk0:/asa821-k8.bin ftp mode passive clock timezone GMT/BST 0 dns server-group DefaultDNS domain-name mydomain.com same-security-traffic permit inter-interface same-security-traffic permit intra-interface object-group network ASA_LAN_Plus_HQ_LAN network-object ASA_LAN 255.255.248.0 network-object HQ-LAN 255.255.255.0 access-list outside_acl remark Exchange web access-list outside_acl extended permit tcp any host MS-Exchange_server-NAT eq https access-list outside_acl remark PPTP Encapsulation access-list outside_acl extended permit gre any host MS-ISA-Server-NAT access-list outside_acl remark PPTP access-list outside_acl extended permit tcp any host MS-ISA-Server-NAT eq pptp access-list outside_acl remark Intra Http access-list outside_acl extended permit tcp any host MS-ISA-Server-NAT eq www access-list outside_acl remark Intra Https access-list outside_acl extended permit tcp any host MS-ISA-Server-NAT eq https access-list outside_acl remark SSL Server-Https 443 access-list outside_acl remark Https 8443(Open VPN Custom port for SSLVPN client downlaod) access-list outside_acl remark FTP 20 access-list outside_acl remark Http access-list outside_acl extended permit tcp any host OpenVPN-Srvr-NAT object-group DM_INLINE_TCP_1 access-list outside_acl extended permit tcp any host OpenVPN-Srvr-NAT eq 8443 access-list outside_acl extended permit tcp any host OpenVPN-Srvr-NAT eq www access-list outside_acl remark For secure remote Managment-SSH access-list outside_acl extended permit tcp any host OpenVPN-Srvr-NAT eq ssh access-list outside_acl extended permit ip Genimage_Anyconnect 255.255.255.0 ASA_LAN 255.255.248.0 access-list ASP-Live remark Live ASP access-list ASP-Live extended permit ip ASA_LAN 255.255.248.0 192.168.60.0 255.255.255.0 access-list Bo remark Bo access-list Bo extended permit ip ASA_LAN 255.255.248.0 192.168.169.0 255.255.255.0 access-list Bill remark Bill access-list Bill extended permit ip ASA_LAN 255.255.248.0 Bill.15 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 Bill.5 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.149.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.160.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.165.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.144.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.140.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.152.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.153.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.163.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.157.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.167.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.156.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 North-Office-LAN 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.161.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.143.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.137.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.159.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 HQ-LAN 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.169.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.150.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.162.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.166.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.168.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.174.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.127.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.173.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.175.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.176.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.100.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.99.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 10.10.10.0 255.255.255.0 access-list no-nat extended permit ip host 192.168.240.34 Cisco-admin-LAN 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 Genimage_Anyconnect 255.255.255.0 access-list no-nat extended permit ip host Tunnel-DC host HQ-SDSL-Peer access-list no-nat extended permit ip HQ-LAN 255.255.255.0 North-Office-LAN 255.255.255.0 access-list no-nat extended permit ip North-Office-LAN 255.255.255.0 HQ-LAN 255.255.255.0 access-list Car remark Car access-list Car extended permit ip ASA_LAN 255.255.248.0 192.168.165.0 255.255.255.0 access-list Che remark Che access-list Che extended permit ip ASA_LAN 255.255.248.0 192.168.144.0 255.255.255.0 access-list Chi remark Chi access-list Chi extended permit ip ASA_LAN 255.255.248.0 192.168.140.0 255.255.255.0 access-list Cla remark Cla access-list Cla extended permit ip ASA_LAN 255.255.248.0 192.168.152.0 255.255.255.0 access-list Eas remark Eas access-list Eas extended permit ip ASA_LAN 255.255.248.0 192.168.149.0 255.255.255.0 access-list Ess remark Ess access-list Ess extended permit ip ASA_LAN 255.255.248.0 192.168.153.0 255.255.255.0 access-list Gat remark Gat access-list Gat extended permit ip ASA_LAN 255.255.248.0 192.168.163.0 255.255.255.0 access-list Hud remark Hud access-list Hud extended permit ip ASA_LAN 255.255.248.0 192.168.157.0 255.255.255.0 access-list Ilk remark Ilk access-list Ilk extended permit ip ASA_LAN 255.255.248.0 192.168.167.0 255.255.255.0 access-list Ken remark Ken access-list Ken extended permit ip ASA_LAN 255.255.248.0 192.168.156.0 255.255.255.0 access-list North-Office remark North-Office access-list North-Office extended permit ip ASA_LAN 255.255.248.0 North-Office-LAN 255.255.255.0 access-list inside_acl remark Inside_ad access-list inside_acl extended permit ip any any access-list Old_HQ remark Old_HQ access-list Old_HQ extended permit ip ASA_LAN 255.255.248.0 HQ-LAN 255.255.255.0 access-list Old_HQ extended permit ip HQ-LAN 255.255.255.0 192.168.99.0 255.255.255.0 access-list She remark She access-list She extended permit ip ASA_LAN 255.255.248.0 192.168.150.0 255.255.255.0 access-list Lit remark Lit access-list Lit extended permit ip ASA_LAN 255.255.248.0 192.168.143.0 255.255.255.0 access-list Mid remark Mid access-list Mid extended permit ip ASA_LAN 255.255.248.0 192.168.137.0 255.255.255.0 access-list Spi remark Spi access-list Spi extended permit ip ASA_LAN 255.255.248.0 192.168.162.0 255.255.255.0 access-list Tor remark Tor access-list Tor extended permit ip ASA_LAN 255.255.248.0 192.168.166.0 255.255.255.0 access-list Tra remark Tra access-list Tra extended permit ip ASA_LAN 255.255.248.0 192.168.168.0 255.255.255.0 access-list Tru remark Tru access-list Tru extended permit ip ASA_LAN 255.255.248.0 192.168.174.0 255.255.255.0 access-list Yo remark Yo access-list Yo extended permit ip ASA_LAN 255.255.248.0 192.168.127.0 255.255.255.0 access-list Nor remark Nor access-list Nor extended permit ip ASA_LAN 255.255.248.0 192.168.159.0 255.255.255.0 access-list Nor extended permit ip ASA_LAN 255.255.248.0 192.168.173.0 255.255.255.0 inactive access-list ST remark ST access-list ST extended permit ip ASA_LAN 255.255.248.0 192.168.175.0 255.255.255.0 access-list Le remark Le access-list Le extended permit ip ASA_LAN 255.255.248.0 192.168.161.0 255.255.255.0 access-list DMZ-ACL remark DMZ access-list DMZ-ACL extended permit ip host OpenVPN-Srvr any access-list no-nat-dmz remark DMZ -No Nat access-list no-nat-dmz extended permit ip 192.168.250.0 255.255.255.0 HQ-LAN 255.255.255.0 access-list Split_Tunnel_List remark ASA-LAN access-list Split_Tunnel_List standard permit ASA_LAN 255.255.248.0 access-list Split_Tunnel_List standard permit Genimage_Anyconnect 255.255.255.0 access-list outside_cryptomap_30 remark Po access-list outside_cryptomap_30 extended permit ip ASA_LAN 255.255.248.0 Po 255.255.255.0 access-list outside_cryptomap_24 extended permit ip ASA_LAN 255.255.248.0 192.168.100.0 255.255.255.0 access-list outside_cryptomap_16 extended permit ip ASA_LAN 255.255.248.0 192.168.99.0 255.255.255.0 access-list outside_cryptomap_34 extended permit ip ASA_LAN 255.255.248.0 10.10.10.0 255.255.255.0 access-list outside_31_cryptomap extended permit ip host 192.168.240.34 Cisco-admin-LAN 255.255.255.0 access-list outside_32_cryptomap extended permit ip host Tunnel-DC host HQ-SDSL-Peer access-list Genimage_VPN_Any_connect_pix_client remark Genimage "Any Connect" VPN access-list Genimage_VPN_Any_connect_pix_client standard permit Genimage_Anyconnect 255.255.255.0 access-list Split-Tunnel-ACL standard permit ASA_LAN 255.255.248.0 access-list nonat extended permit ip HQ-LAN 255.255.255.0 192.168.99.0 255.255.255.0 pager lines 24 logging enable logging timestamp logging console notifications logging monitor notifications logging buffered warnings logging asdm informational no logging message 106015 no logging message 313001 no logging message 313008 no logging message 106023 no logging message 710003 no logging message 106100 no logging message 302015 no logging message 302014 no logging message 302013 no logging message 302018 no logging message 302017 no logging message 302016 no logging message 302021 no logging message 302020 flow-export destination inside MS-ISA-Server 2055 flow-export destination outside 192.168.130.126 2055 flow-export template timeout-rate 1 flow-export delay flow-create 15 mtu outside 1500 mtu inside 1500 mtu DMZ 1500 mtu management 1500 ip local pool RAS-VPN 10.0.0.1.1-10.0.0.1.254 mask 255.255.255.255 icmp unreachable rate-limit 1 burst-size 1 icmp permit any unreachable outside icmp permit any echo outside icmp permit any echo-reply outside icmp permit any outside icmp permit any echo inside icmp permit any echo-reply inside icmp permit any echo DMZ icmp permit any echo-reply DMZ asdm image disk0:/asdm-621.bin no asdm history enable arp timeout 14400 nat-control global (outside) 1 interface global (inside) 1 interface nat (inside) 0 access-list no-nat nat (inside) 1 0.0.0.0 0.0.0.0 nat (DMZ) 0 access-list no-nat-dmz static (inside,outside) MS-ISA-Server-NAT MS-ISA-Server netmask 255.255.255.255 static (DMZ,outside) OpenVPN-Srvr-NAT OpenVPN-Srvr netmask 255.255.255.255 static (inside,outside) MS-Exchange_server-NAT MS-Exchange_server netmask 255.255.255.255 access-group outside_acl in interface outside access-group inside_acl in interface inside access-group DMZ-ACL in interface DMZ route outside 0.0.0.0 0.0.0.0 1.1.1.225 1 route inside 10.10.10.0 255.255.255.0 192.168.240.34 1 route outside Genimage_Anyconnect 255.255.255.0 1.1.1.225 1 route inside Open-VPN 255.255.248.0 OpenVPN-Srvr 1 route inside HQledon-Voice-LAN 255.255.255.0 192.168.240.34 1 route outside Bill 255.255.255.0 1.1.1.225 1 route outside Yo 255.255.255.0 1.1.1.225 1 route inside 192.168.129.0 255.255.255.0 192.168.240.34 1 route outside HQ-LAN 255.255.255.0 1.1.1.225 1 route outside Mid 255.255.255.0 1.1.1.225 1 route outside 192.168.140.0 255.255.255.0 1.1.1.225 1 route outside 192.168.143.0 255.255.255.0 1.1.1.225 1 route outside 192.168.144.0 255.255.255.0 1.1.1.225 1 route outside 192.168.149.0 255.255.255.0 1.1.1.225 1 route outside 192.168.152.0 255.255.255.0 1.1.1.225 1 route outside 192.168.153.0 255.255.255.0 1.1.1.225 1 route outside North-Office-LAN 255.255.255.0 1.1.1.225 1 route outside 192.168.156.0 255.255.255.0 1.1.1.225 1 route outside 192.168.157.0 255.255.255.0 1.1.1.225 1 route outside 192.168.159.0 255.255.255.0 1.1.1.225 1 route outside 192.168.160.0 255.255.255.0 1.1.1.225 1 route outside 192.168.161.0 255.255.255.0 1.1.1.225 1 route outside 192.168.162.0 255.255.255.0 1.1.1.225 1 route outside 192.168.163.0 255.255.255.0 1.1.1.225 1 route outside 192.168.165.0 255.255.255.0 1.1.1.225 1 route outside 192.168.166.0 255.255.255.0 1.1.1.225 1 route outside 192.168.167.0 255.255.255.0 1.1.1.225 1 route outside 192.168.168.0 255.255.255.0 1.1.1.225 1 route outside 192.168.173.0 255.255.255.0 1.1.1.225 1 route outside 192.168.174.0 255.255.255.0 1.1.1.225 1 route outside 192.168.175.0 255.255.255.0 1.1.1.225 1 route outside 192.168.99.0 255.255.255.0 1.1.1.225 1 route inside ASA_LAN 255.255.255.0 192.168.240.34 1 route inside 192.168.124.0 255.255.255.0 192.168.240.34 1 route inside 192.168.50.0 255.255.255.0 192.168.240.34 1 route inside 192.168.51.0 255.255.255.128 192.168.240.34 1 route inside 192.168.240.0 255.255.255.224 192.168.240.34 1 route inside 192.168.240.164 255.255.255.224 192.168.240.34 1 route inside 192.168.240.196 255.255.255.224 192.168.240.34 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa-server vpn protocol radius max-failed-attempts 5 aaa-server vpn (inside) host 192.168.X.2 timeout 60 key a5a53r3t authentication-port 1812 radius-common-pw a5a53r3t aaa authentication ssh console LOCAL aaa authentication http console LOCAL http server enable http 0.0.0.0 0.0.0.0 inside http 1.1.1.2 255.255.255.255 outside http 1.1.1.234 255.255.255.255 outside http 0.0.0.0 0.0.0.0 management http 1.1.100.198 255.255.255.255 outside http 0.0.0.0 0.0.0.0 outside crypto map FW_Outside_map 1 match address Bill crypto map FW_Outside_map 1 set peer x.x.x.121 crypto map FW_Outside_map 1 set transform-set SECURE crypto map FW_Outside_map 2 match address Bo crypto map FW_Outside_map 2 set peer x.x.x.202 crypto map FW_Outside_map 2 set transform-set SECURE crypto map FW_Outside_map 3 match address ASP-Live crypto map FW_Outside_map 3 set peer x.x.x.113 crypto map FW_Outside_map 3 set transform-set SECURE crypto map FW_Outside_map 4 match address Car crypto map FW_Outside_map 4 set peer x.x.x.205 crypto map FW_Outside_map 4 set transform-set SECURE crypto map FW_Outside_map 5 match address Old_HQ crypto map FW_Outside_map 5 set peer x.x.x.2 crypto map FW_Outside_map 5 set transform-set SECURE WG crypto map FW_Outside_map 6 match address Che crypto map FW_Outside_map 6 set peer x.x.x.204 crypto map FW_Outside_map 6 set transform-set SECURE crypto map FW_Outside_map 7 match address Chi crypto map FW_Outside_map 7 set peer x.x.x.212 crypto map FW_Outside_map 7 set transform-set SECURE crypto map FW_Outside_map 8 match address Cla crypto map FW_Outside_map 8 set peer x.x.x.215 crypto map FW_Outside_map 8 set transform-set SECURE crypto map FW_Outside_map 9 match address Eas crypto map FW_Outside_map 9 set peer x.x.x.247 crypto map FW_Outside_map 9 set transform-set SECURE crypto map FW_Outside_map 10 match address Ess crypto map FW_Outside_map 10 set peer x.x.x.170 crypto map FW_Outside_map 10 set transform-set SECURE crypto map FW_Outside_map 11 match address Hud crypto map FW_Outside_map 11 set peer x.x.x.8 crypto map FW_Outside_map 11 set transform-set SECURE crypto map FW_Outside_map 12 match address Gat crypto map FW_Outside_map 12 set peer x.x.x.212 crypto map FW_Outside_map 12 set transform-set SECURE crypto map FW_Outside_map 13 match address Ken crypto map FW_Outside_map 13 set peer x.x.x.230 crypto map FW_Outside_map 13 set transform-set SECURE crypto map FW_Outside_map 14 match address She crypto map FW_Outside_map 14 set peer x.x.x.24 crypto map FW_Outside_map 14 set transform-set SECURE crypto map FW_Outside_map 15 match address North-Office crypto map FW_Outside_map 15 set peer x.x.x.94 crypto map FW_Outside_map 15 set transform-set SECURE crypto map FW_Outside_map 16 match address outside_cryptomap_16 crypto map FW_Outside_map 16 set peer x.x.x.134 crypto map FW_Outside_map 16 set transform-set SECURE crypto map FW_Outside_map 16 set security-association lifetime seconds crypto map FW_Outside_map 17 match address Lit crypto map FW_Outside_map 17 set peer x.x.x.110 crypto map FW_Outside_map 17 set transform-set SECURE crypto map FW_Outside_map 18 match address Mid crypto map FW_Outside_map 18 set peer 78.x.x.110 crypto map FW_Outside_map 18 set transform-set SECURE crypto map FW_Outside_map 19 match address Sp crypto map FW_Outside_map 19 set peer x.x.x.47 crypto map FW_Outside_map 19 set transform-set SECURE crypto map FW_Outside_map 20 match address Tor crypto map FW_Outside_map 20 set peer x.x.x.184 crypto map FW_Outside_map 20 set transform-set SECURE crypto map FW_Outside_map 21 match address Tr crypto map FW_Outside_map 21 set peer x.x.x.75 crypto map FW_Outside_map 21 set transform-set SECURE crypto map FW_Outside_map 22 match address Yo crypto map FW_Outside_map 22 set peer x.x.x.40 crypto map FW_Outside_map 22 set transform-set SECURE crypto map FW_Outside_map 23 match address Tra crypto map FW_Outside_map 23 set peer x.x.x.145 crypto map FW_Outside_map 23 set transform-set SECURE crypto map FW_Outside_map 24 match address outside_cryptomap_24 crypto map FW_Outside_map 24 set peer x.x.x.46 crypto map FW_Outside_map 24 set transform-set SECURE crypto map FW_Outside_map 24 set security-association lifetime seconds crypto map FW_Outside_map 25 match address Nor crypto map FW_Outside_map 25 set peer x.x.x.70 crypto map FW_Outside_map 25 set transform-set SECURE crypto map FW_Outside_map 26 match address Ilk crypto map FW_Outside_map 26 set peer x.x.x.65 crypto map FW_Outside_map 26 set transform-set SECURE crypto map FW_Outside_map 27 match address Nor crypto map FW_Outside_map 27 set peer x.x.x.240 crypto map FW_Outside_map 27 set transform-set SECURE crypto map FW_Outside_map 28 match address ST crypto map FW_Outside_map 28 set peer x.x.x.163 crypto map FW_Outside_map 28 set transform-set SECURE crypto map FW_Outside_map 28 set security-association lifetime seconds crypto map FW_Outside_map 28 set security-association lifetime kilobytes crypto map FW_Outside_map 29 match address Lei crypto map FW_Outside_map 29 set peer x.x.x.4 crypto map FW_Outside_map 29 set transform-set SECURE crypto map FW_Outside_map 30 match address outside_cryptomap_30 crypto map FW_Outside_map 30 set peer x.x.x.34 crypto map FW_Outside_map 30 set transform-set SECURE crypto map FW_Outside_map 31 match address outside_31_cryptomap crypto map FW_Outside_map 31 set pfs crypto map FW_Outside_map 31 set peer Cisco-admin-Peer crypto map FW_Outside_map 31 set transform-set ESP-AES-256-SHA crypto map FW_Outside_map 32 match address outside_32_cryptomap crypto map FW_Outside_map 32 set pfs crypto map FW_Outside_map 32 set peer HQ-SDSL-Peer crypto map FW_Outside_map 32 set transform-set ESP-AES-256-SHA crypto map FW_Outside_map 34 match address outside_cryptomap_34 crypto map FW_Outside_map 34 set peer x.x.x.246 crypto map FW_Outside_map 34 set transform-set ESP-AES-128-SHA ESP-AES-192-SHA ESP-AES-256-SHA crypto map FW_Outside_map 65535 ipsec-isakmp dynamic dynmap crypto map FW_Outside_map interface outside crypto map FW_outside_map 31 set peer x.x.x.45 crypto isakmp identity address crypto isakmp enable outside crypto isakmp policy 9 webvpn enable outside svc enable group-policy ASA-LAN-VPN internal group-policy ASA_LAN-VPN attributes wins-server value 192.168.x.1 192.168.x.2 dns-server value 192.168.x.1 192.168.x.2 vpn-tunnel-protocol IPSec svc split-tunnel-policy tunnelspecified split-tunnel-network-list value Split-Tunnel-ACL default-domain value MYdomain username xxxxxxxxxx password privilege 15 tunnel-group DefaultRAGroup ipsec-attributes isakmp keepalive threshold 30 retry 2 tunnel-group DefaultWEBVPNGroup ipsec-attributes isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.121 type ipsec-l2l tunnel-group x.x.x..121 ipsec-attributes pre-shared-key * isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.202 type ipsec-l2l tunnel-group x.x.x.202 ipsec-attributes pre-shared-key * isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.113 type ipsec-l2l tunnel-group x.x.x.113 ipsec-attributes pre-shared-key * isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.205 type ipsec-l2l tunnel-group x.x.x.205 ipsec-attributes pre-shared-key * isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.204 type ipsec-l2l tunnel-group x.x.x.204 ipsec-attributes pre-shared-key * isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.212 type ipsec-l2l tunnel-group x.x.x.212 ipsec-attributes pre-shared-key * tunnel-group x.x.x.215 type ipsec-l2l tunnel-group x.x.x.215 ipsec-attributes pre-shared-key * tunnel-group x.x.x.247 type ipsec-l2l tunnel-group x.x.x.247 ipsec-attributes pre-shared-key * tunnel-group x.x.x.170 type ipsec-l2l tunnel-group x.x.x.170 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x..8 type ipsec-l2l tunnel-group x.x.x.8 ipsec-attributes pre-shared-key * tunnel-group x.x.x.212 type ipsec-l2l tunnel-group x.x.x.212 ipsec-attributes pre-shared-key * tunnel-group x.x.x.230 type ipsec-l2l tunnel-group x.x.x.230 ipsec-attributes pre-shared-key * tunnel-group x.x.x.24 type ipsec-l2l tunnel-group x.x.x.24 ipsec-attributes pre-shared-key * tunnel-group x.x.x.46 type ipsec-l2l tunnel-group x.x.x.46 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.4 type ipsec-l2l tunnel-group x.x.x.4 ipsec-attributes pre-shared-key * tunnel-group x.x.x.110 type ipsec-l2l tunnel-group x.x.x.110 ipsec-attributes pre-shared-key * tunnel-group 78.x.x.110 type ipsec-l2l tunnel-group 78.x.x.110 ipsec-attributes pre-shared-key * tunnel-group x.x.x.47 type ipsec-l2l tunnel-group x.x.x.47 ipsec-attributes pre-shared-key * tunnel-group x.x.x.34 type ipsec-l2l tunnel-group x.x.x.34 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x..129 type ipsec-l2l tunnel-group x.x.x.129 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.94 type ipsec-l2l tunnel-group x.x.x.94 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.40 type ipsec-l2l tunnel-group x.x.x.40 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.65 type ipsec-l2l tunnel-group x.x.x.65 ipsec-attributes pre-shared-key * tunnel-group x.x.x.70 type ipsec-l2l tunnel-group x.x.x.70 ipsec-attributes pre-shared-key * tunnel-group x.x.x.134 type ipsec-l2l tunnel-group x.x.x.134 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.163 type ipsec-l2l tunnel-group x.x.x.163 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.2 type ipsec-l2l tunnel-group x.x.x.2 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group ASA-LAN-VPN type remote-access tunnel-group ASA-LAN-VPN general-attributes address-pool RAS-VPN authentication-server-group vpn authentication-server-group (outside) vpn default-group-policy ASA-LAN-VPN tunnel-group ASA-LAN-VPN ipsec-attributes pre-shared-key * tunnel-group x.x.x.184 type ipsec-l2l tunnel-group x.x.x.184 ipsec-attributes pre-shared-key * tunnel-group x.x.x.145 type ipsec-l2l tunnel-group x.x.x.145 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.75 type ipsec-l2l tunnel-group x.x.x.75 ipsec-attributes pre-shared-key * tunnel-group x.x.x.246 type ipsec-l2l tunnel-group x.x.x.246 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.2 type ipsec-l2l tunnel-group x.x.x..2 ipsec-attributes pre-shared-key * tunnel-group x.x.x.98 type ipsec-l2l tunnel-group x.x.x.98 ipsec-attributes pre-shared-key * ! ! ! policy-map global_policy description Netflow class class-default flow-export event-type all destination MS-ISA-Server policy-map type inspect dns migrated_dns_map_1 parameters message-length maximum 512 Anyone have a clue because Im on the verge of going postal.....

    Read the article

  • OpenVPN - Ubuntu 10.04 - Client Can't Connect to Server - Linux Route Add Command Failed

    - by nicorellius
    I suppose this could be asked on Server Fault as well, but it is specific to the client so I thought I'd start here. I have keys for access to an OpenVPN server already in place. I have used these keys to connect already, but using a Windows XP machine. On a Ubuntu machine, I installed OpenVPN and then configured client.conf file so that I could run: sudo openvpn --config client.conf And it seems correct but I still can't connect and get these errors and lines of output: Mon May 31 14:34:57 2010 ERROR: Linux route add command failed: external program exited with error status: 7 Mon May 31 14:34:57 2010 /sbin/route add -net 10.8.0.1 netmask 255.255.255.255 gw 10.8.0.17 SIOCADDRT: File exists Mon May 31 14:34:57 2010 ERROR: Linux route add command failed: external program exited with error status: 7 Mon May 31 14:34:57 2010 Initialization Sequence Completed I searched the net for forums and ideas and tried some file moving and renaming but still ended up in the same place.

    Read the article

  • IP route ppp0 + eth0 access to outside network

    - by Vitor
    I need some help in define a route I have two connections one from eth0 and other a ppp0 (a 3G card) Not having the ppp0 connection active my route table is: Destination Gateway Genmask Flags Metric Ref Use Iface default DD-WRT 0.0.0.0 UG 100 0 0 eth0 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 I can access my webserver from an outside network through ethernet interface Than I have also my ppp0 3G connection active havig the following route table: D estination Gateway Genmask Flags Metric Ref Use Iface default 10.64.64.64 0.0.0.0 UG 0 0 0 ppp0 10.64.64.64 * 255.255.255.255 UH 0 0 0 ppp0 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 Now I only can access my webserver in outside networks through the IP of the 3G connection Note that my server is serving at 0.0.0.0 IP (to all interfaces) But I need to get access to webserver to both interfaces ethernet and 3G connection I only can have access to both connection in local network Any help to configure this network to have both interfaces with outside networks access is welcome Can anyone give me an example to configure this network with 2 gateways to give outside networks access One for IP 192.168.1.149 and other for the ppp0 IP 89.214.60.196 Tanks

    Read the article

  • OpenVPN - Ubunut 10.04 - Client Can't Connect to Server - Linux Route Add Command Failed

    - by nicorellius
    I suppose this could be asked on Server Fault as well, but it is specific to the client so I thought I'd start here. I have keys for a OpenVPN server already in place. I have used these keys to connect already, but using a Windows XP machine. I started by building the client.conf file so that I could run: sudo openvpn --config client.conf And it seems correct but I still can't connect and get these errors and lines of output: Mon May 31 14:34:57 2010 ERROR: Linux route add command failed: external program exited with error status: 7 Mon May 31 14:34:57 2010 /sbin/route add -net 10.8.0.1 netmask 255.255.255.255 gw 10.8.0.17 SIOCADDRT: File exists Mon May 31 14:34:57 2010 ERROR: Linux route add command failed: external program exited with error status: 7 Mon May 31 14:34:57 2010 Initialization Sequence Completed I searched the net for forums and ideas and tried some file moving and renaming but still ended up in the same place.

    Read the article

  • Route all traffic via OpenVPN client

    - by Ilya
    I've got OpenVPN client running on 192.168.0.3. What I'd like to do is route all the traffic from the second computer with 192.168.0.100 via OpenVPN client that's running on the first computer. My router ip is 192.168.0.1 Network topology: Computer with OpenVPN client: 192.168.0.3 Computer that has to be rerouted: 192.168.0.100 Router: 192.168.0.1 I want it to work in the following way: 192.168.0.100 computer => 192.168.0.3 computer => OpenVPN => 192.168.0.1 How can I achieve that by only modifying windows' routing table? I've tried the following, which didn't work (it just dropped my internet connection): route delete 0.0.0.0 mask 255.255.255.255 192.168.0.1 route add 0.0.0.0 mask 255.255.255.255 192.168.0.100 Thanks!

    Read the article

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

< Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >