Search Results

Search found 11455 results on 459 pages for 'dual core'.

Page 14/459 | < Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >

• New laptop, Windows 8.1, attempting dual install. Ubuntu installer doesn't 'see' existing OS

  - by Flaminica

  Though I've used Ubuntu for a few years, I'm new to installation. Previously I had help and now I'm doing it alone (moved across the world). Windows 8.1 came preinstalled on my new laptop (Toshiba Satellite C70-A-17C - Core i5, 8 GB RAM, 750 GB HDD). I have already followed a few steps I found online to prepare for a dual install (with Ubuntu 14.04). I backed up Windows, created a bootable Ubuntu USB and DVD (just in case one didn't work), turned off fast boot and secure boot, and shrunk C:/. The new unallocated drive portion is 292.97 GB. After shrinking C:/, I restarted Windows a couple of times to make sure everything was working fine (it is). I then attempted to install with the Ubuntu live USB. However, the Ubuntu installer doesn't see that Windows 8.1 is already installed. I don't understand, and don't want to mess with Ubuntu partitioning when I don't know where the partitions will be created. My concern is that, if I go further with the installation process, Windows might be overwritten or compromised in some way. I then tried to reboot using the Ubuntu live DVD, thinking I might get a different result. However, I can't figure out how to make the laptop boot from the CD drive. I went into the BIOS and found no option there, either. Any help is very appreciated! EDIT: Looks like I can't link directly to each photo. Here is my album of screenshots: http://imgur.com/a/zChCo Here you can see that there's no option to boot from CD drive, only USB. Everything looks okay so far. I don't understand this. Ubuntu has not yet been installed. Unmounting partitions? (I chose 'no'.) Even though the laptop came pre-installed with Windows 8.1, the Ubuntu USB installer can't see it. I chose 'something else'. I need to pick and format partitions. I scrolled down and took a second shot to include all information. Completely lost and cancelled installation.

  Read the article

• Core i7 & x58 overclocking?

  - by user9611

  Is there any problem overclocking the Core i7 chip on an x58 mb with you have all 6 memory slots filled? I just heard somewhere that if you want to overclock you should stick to 3 modules? Is there any truth to this? thanks, Ncage

  Read the article

• My Intel Core i3 frequently shuts down due to "Processor Thermal Trip error"

  - by explorest

  My Desktop PC running Windows 7 on Intel Core i3 dual processor machine started shutting down during the boot process a couple of days ago. I left it alone for about 48 hours and tried again. The boot process informed me about Processor Thermal Trip as being the cause of boot failures and suggested a Windows recovery process. I went through the recovery process which completed without problems. The PC booted normally and Windows 7 worked as expected but after 10 minutes it again tripped and now whenever I start it, it shuts down during the boot process. What should I do next?... is there a boot menu / setup settings that needs to be adjusted to avoid it... Or is there a hardware problem (which seems unlikely as the machine occasionally boots perfectly )?

  Read the article

• Core i7 c1e and speedstepping - BSOD on shutdown

  - by DeaconDesperado

  I'm having an interesting problem with my recent Core i7 Digital Audio workstation build that I am curious to see if others have encountered. First, here are the specs on the machine. ASUS P6TD Deluxe Intel X58 Socket LGA1366 MB Intel Core i7-950 3.06Ghz 8M LGA1366 CPU CORSAIR DOMINATOR 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 Western Digital Caviar Black WD5001AALS 500GB Plus a couple ASUS optical drives and a 750W Corsair PSU. Running Windows 7 x64. All this is connected to the nefarious Digi 002 firewire audio interface for use with Pro Tools. I following mostly the specs posted by many other I7 users in the digidesign community who pooled their collective knowledge in this thread. Now after completing my build, I fell victim to the "UD5 squeal" described at that forum thread. So taking the advice posted, I disabled c1e advanced halt state and Intel speed stepping (I would likely have done this anyway to maintain a stable clock, power consumption isn't really a relevant concern on this machine.) I enabled XMP to set the ram timings properly as well. What I am experiencing is a BSOD upon shutdown, but only immediately after windows fully exits and ends all processes. The error is a MACHINE_CHECK_EXCEPTION 0x000000. The funny thing is that it is extremely intermitent and only occurs if the shutdown immediately followed a period of relative idleness. It does not a generate a minidump, I suspect because windows monitoring has terminated by the time this error occurs. No damage is evident and one can simply turn off manually and the system will act as though a proper shutdown had occurred. If anything it is a annoyance, I just want to be certain it is not affecting my long term stability. I have read that the i7 950 does not like DRAM voltages past 1.65, but that they are acceptable if they are within .5 of the BLCK setting. I have tried disabling XMP and setting all timings to auto and the problem still manifests in an identical way. It is suspect that the cpu idleness preceding shutdown is the determining factor, as both c1e and speedstepping are both settings intended to modify handling of this state. Any suggestions or prior experiences would be greatly appreciated. EDIT: The behavior very closely resembles what's described in this thread: http://www.tomshardware.com/forum/12003-63-shut-problem-windows The benign nature of it of is identical. I can't seem to download the hotfix cited there however.

  Read the article

• Multi-core processors: Better performance running multiple applications?

  - by aip.cd.aish

  I realize for single applications - the application itself has to be designed to take advantage of multiple cores. But what about executing many different applications simultaneously? On my development machine at an average instance, I run multiple servers (a database server, a web server), multiple instance of IDEs (either Visual Studio or NetBeans), Web-browser with multiple tabs (in Chrome, each tab is a process on its own), FTP client, SSH client etc. Does having a multi-core system improve the ability to run multiple applications simultaneously?

  Read the article

• Can you install Windows Messaging on Windows Server Core 2008 R2

  - by user179632

  We have Windows Server Core 2008 R2. We have successfully installed .NET and the Visual C++ runtimes. Our application requires the ability to post messages to an MSMQ server To be clear we do not want to install MSMQ server on the machine. However we want to be able to post messages to a remote MSMQ server so we need to install the client parts of Windows Messaging. Has anybody succeeded in doing this?

  Read the article

• Dual Booting Windows 7 and Ubuntu 12.04. Partition Sizes?

  - by John F.

  I'm about to reinstall Windows, so I thought that I'd try Ubuntu out on a partition just for fun. My question is, how large should my partitions be for each of them? I know this various depending on what you use, so i'll give you a general idea of what I have, and what I have in mind. I'm currently running: Windows 7 Professional (64bit) RAM: 4GB CPU: 2.5Ghz Quad Core processor HDD: 500GB GPU: 1GB Nvidia GeForce I have around 130GB in Steam games, and some heavier applications like Photoshop CS6, Sony Vegas Pro 11. But other Applications I use are: Chrome Skype Dxtory Fraps OpenOffice BitTorrent and other assorted smaller programs. So, I was thinking that I would give my Windows partition about 150-200GB, my Ubuntu Partition around 20GB, and the rest to shared storage. I'm not really sure if I'd need more or less on Ubuntu, because I've never used it and I'm not really sure what kind of apps i'd be using over there. This would also be a clean install, so I'd be wiping my HDD, creating the Partitions in GParted, then installing Windows with Ubuntu following that. Any critique you could give me? Maybe explanations to what the /root, /boot and /home partitions I hear are about? Thanks in advanced if you actually read this lengthy thing! Any help is appreciated. (x

  Read the article

• Asus X202e VivoBook, dual boot. How to get around UEFI and have Win8 & Ubuntu?

  - by Nukeface

  I've gotten my hands on an Asus Vivobook X202e. I like it, handy to use, small, etc etc. Oh, it's the i3 core version. For school I still need Windows * sigh * for the .NET development. (I know, possible in Ubuntu, this n that, but for ease atm wanting to keep it with Win8). So. How to install both on this little thing? I've found a way into the BIOS (before splash screen, mash F2. Works only after reboot, not cold boot). But the whole boot loading setup is different than from what I know, and I must've messed up something because it's been "Attempting Repairs", "Analyzing hard disk", and a bunch of other things for the past 15 minutes. (All I've done is selected "disabled" on secure boot, picky as ** Microsoft). Keeping the original Windows installation is of no concern. Found the product key already and have a clean install waiting. BTW, not trying to leech knowledge, even though first question and no answers. I'm more and more active on Stackoverflow. But, especially due to secure boot and windows 8, I'm going over to Ubuntu. Well, more and more anyway, I like my Windows based games as well ;) UPDATE Managed to do a clean install of Windows 8 Pro. After disabling Secure Boot, also had to disable fast boot, and enable Launch CSM, leaving the option which appeared (Launch PXE OpROM) disabled. Then I rebooted, with the USB Boot drive I created using the Windows 7 USB DVD Download Tool (scroll down for download link), provided by Microsoft. During the installation, I chose to install a clean version, therefor deleted the partitions containing current windows files. I left the Recovery partition (you never know...). Of course, the new Windows Installation dit not like this. Apparantly Windows cannot be installed on a GPT hard disk. Remember I hadn't changed the partition table, was still factory default! Minus a few partitions, granted. So deleted ALL partittions, did a format of the disk, created a new partition. Et voila, Windows installation started. FINALLY! WONDROUS After the installation, Windows still had background images located in C:/Users/ ME /AppData/Local/Microsoft/Themes/RoamedThemeFiles/DesktopBackground/ that I had in the previous installation. Before doing: format, delete partition, cascade partitions, create new partition of different size, format partition, install Windows. It managed to keep the images through all that. Anyone got an idea on that one? It also remembered the settings for the Windows Aero theme... UPDATED QUESTION: After all this you'd think I'd have the rest figured out. Wrong. Ubuntu 12.10, 64 bit installation can't read the partitioning of the hdd during the installation. Any ideas on how to fix this so the install for a dual-boot system can proceed? (Preferably without starting anew with Windows as well ;) )

  Read the article

• Prime95 daul-core tool?

  - by Ssvarc

  Does Prime95 use multiple cores? (Is there a difference in this regard between running it from Windows, UBCD, or UBCD4Win?) If it doesn't, are there tools out there that will (preferably via a boot disc)? Thanks!

  Read the article

• Why does CentOS Linux use cpu/core #1 so much more in a 4-core system?

  - by ck_

  I've been watching top and htop for awhile on a very active server and I am wondering why linux does not automatically use cpu affinity better? CPU #1 (actually core #1 of 4) is used much more heavily than the others. Is there a setting similar to what vm.swappiness does for vm swap that forces a preferred affinity pattern? Should I be using forced affinity settings within mysql/apache/nginx/exim to get better results? This is on CentOS 2.6.32-279 x86_64 SMP Thanks for any suggestions.

  Read the article

• Weird glitches on Intel iGPU

  - by FrederikVds

  I have a weird problem that I can't manage to describe in one word, so I'm having trouble searching for a solution. My monitors sometimes go black for a tenth of a second. Other times, they show the image shifted a few centimeters to the left or to the right. This happens on both of my monitors, but not necessarily at the same time. I would say it happens about once a minute, unless under heavy load, in which case it can happen every second or so. Interestingly, heavy CPU/memory usage can also cause this, not just heavy GPU usage. This only happens when they are both at 1920x1080, not when one of them, or both, are at a lower resolution. It also happens when they are in mirrored mode instead of extended desktop mode. My GPU is obviously not at full clock speed most of the time: this happens at 350 MHz as well as at 1200 MHz. So it doesn't seem like a matter of too little performance. I'm not seeing any traditional artefacts, even when I use MSI Kombustor, only this kind of full-screen glitches. CPU stressing software isn't reporting any issues either. I'm thinking maybe the connection between my CPU and my PCH isn't fast enough, but I can't find anyone with the same problem to confirm that. I'd rather not invest in a discrete GPU without being certain it will fix something. Does anyone know how to search for this, or even better, does anyone have a solution? My full specs are below. Thanks in advance! Specs: ASUS P8Z77-M Intel Core i5-3570K (with Intel HD 4000 Graphics) 2x4 GB AMD Performance Edition memory Corsair Force 3 Series Rev. B 120GB SSD Maxtor 200GB HD Lite-On DVD-RW Antec 350 Watt PSU 64-bit Windows 7 Professional 2x Iiyama ProLite E2208HDS display

  Read the article

• wince 6.0 xrm1172 dual uart programming

  - by Roger

  Hi All has anyone written driver in wince 6.0 for XR20M1172 dual uart chip using SPI interface.If so can u plz suggest some ideas as how to initialize the chip.

  Read the article

• Store XML data in Core Data

  - by ct2k7

  Hi, is there any easy way of store XML data into core data? Currently, my app just pulls the values from the XML file directly, however, this isn't efficient for XML files which holds over 100 entries, thus storing the data in Core Data would be the best option. XML file is called/downloaded/parsed ever time the app opens. With the Core Data, the XML data would be downloaded ever 3600 seconds or so, and refresh the current data in the core data, to reduce the loading time when opening the app. Any ideas on how I can do this? Having reviewed the developer documentation, it doesn't look very tasty.

  Read the article

• Core Data vs. SQLitePersistentObjects

  - by Macatomy

  I'm creating an iPhone app and I'm trying to choose between 2 solutions for a persistent store. Core Data, or SQLitePersistentObjects. Basically, all my app needs is a way to store an array of model objects and then load them again to display in a UITableView. Its nothing too complicated. Core Data seems to have a much higher learning curve than the simple to use SQLitePersistentObjects. Are there any obvious benefits of using Core Data over SQLitePersistentObjects in my case?

  Read the article

• Can Core Data be used on Linux?

  - by glenc

  This might be a stupid question, but I was wondering whether or not you can use the Core Data libraries on Linux at all? I'm planning how to build the server side of an iPhone app that I'm working on, and have found that you can use PyObjC to get access to Core Data in a Python environment, e.g. use Core Data in a TurboGears web application. At this point I'm thinking that you would have to run the web server on Mac OSX, because I can't find any evidence on the internet that you can access the Objective-C libraries on Linux. I've always written webapps on Linux but will obviously make the jump to an OSX server if it allows me to use the same datastore implementation on the iPhone and the server, the only job remaining being the Core Data <- Web Services XML translation that has to happen on the wire.

  Read the article

• How can Core Data store an NSData?

  - by mystify

  The documentation says, that core data properties can only store NSString, NSNumber and NSDate types. However, a lot of Core Data users claim Core Data could also store an NSData type. But I wasn't able to see that in the documentation, although the Xcode Data Modeler allows to choose a data type called "binary" (which seems to be NSData). Did I miss something? Is there a hidden place in the documentation that indeed lists NSData for binary stuff?

  Read the article

• Linux core dumps are too large!

  - by themoondothshine

  Hey guys, Recently I've been noticing an increase in the size of the core dumps generated by my application. Initially, they were just around 5MB in size and contained around 5 stack frames, and now I have core dumps of 2GBs and the information contained within them are no different from the smaller dumps. Is there any way I can control the size of core dumps generated? Shouldn't they be at least smaller than the application binary itself? Binaries are compiled in this way: Compiled in release mode with debug symbols (ie, -g compiler option in GCC). Debug symbols are copied onto a separate file and stripped from the binary. A GNU debug symbols link is added to the binary. At the beginning of the application, there's a call to setrlimit which sets the core limit to infinity -- Is this the problem?

  Read the article

• How to add database layer in core data application

  - by aditya

  Hi all I am fairly new to core data technology and i searched a lot on how to add the database to a core data application.so can anybody guide me on how to integrate the database layer? i have seen the iphone tutorial on core data (i.e books example) but i am not able to understand how to .sqlite file has been included in that application

  Read the article

• Activation context generation failed for "C:\php\php-cgi.exe". Dependent Assembly

  - by Eyla

  Greeting, I have Windows Server 2008 Server Core. I want to configure this server to host php websites using IIS 7. I installed and configured IIS7 to run php using the steps in this website: http://blogs.msdn.com/b/philpenn/archive/2009/07/19/deploying-iis-7-5-fastcgi-php-on-server-core.aspx Now I’m facing a problem that when I request my php website I would get this error. Server Error 500 - Internal server error. There is a problem with the resource you are looking for, and it cannot be displayed. I check the even log and I found these details too: Activation context generation failed for "C:\php\php-cgi.exe". Dependent Assembly Microsoft.VC90.CRT,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="9.0.21022.8" could not be found. Please use sxstrace.exe for detailed diagnosis. I search about this error and I found a solution for it but which is to install Microsoft Visual C++ 2008 SP1 Redistributable Package (x86). I installed but still I’m getting same error. Please help me to solve this problem and let me know if you want to know more info about my issue.

  Read the article

• I need help choosing between two configurations of the Dell Studio 14

  - by Adnan

  There are two configurations of the Dell Studio 14 (1458) which I'm looking at: Config 1: Core i7-720QM @ 1.6 GHz; ATI Mobility Radeon HD 5450 1GB; 4gb DDR3 RAM @ 1066 MHz; 500 GB SATA HDD @ 7200 RPM; Price: $999 Config 2: Core i5-430M; ATI Mobility Radeon HD 4530 512MB; 4GB DDR3 RAM @ 1066 MHz; 500 GV SATA HDD @ 7200 RPM; Price: $874 What I want to know is, would config 1 still be able to do decent gaming (maybe some Starcraft II), and is there a great performance difference between the i5 and i7 processors? Is the $130 extra worth it for the i7 and better graphics card? I do more than just basic computing. I plan on getting into web design (specifically using Photoshop and Dreamweaver), and I wish to do gaming. I know Conifg 1 is the better value, but I want to be sure that the $130 more is truly worth it. I dont have too much money and want to spend wisely as possible, yet I am a computer geek and plan on doing a lot more than the average user.

  Read the article

• Graphics card recommendation for dual-HD output?

  - by Graham

  I'm going for a dual-HD monitor setup (HDMI or DVI output), running Ubuntu 11.10 64-bit with Unity 3D. What graphics card / video card should I get? Requirements: Dual-monitor output for DVI (mixed-resolution: 1920x1080 and 1920x1200) Or dual-HDMI output, if it works with Ubuntu Smooth desktop compositing and (Chrome) browser and IDE window rendering At least 60fps on fullscreen glxgears (1920x1200 resolution) Supported and non-buggy behaviour in Unity 3D/Compiz Not looking to play games Smooth fullscreen video playback (just because)

  Read the article

• Need a PCIe desktop graphics card for dual-monitor

  - by Graham

  I have a mid-2008 workstation with two HD monitors supporting HDMI and DVI inputs. Since Ubuntu 11.10, I have experienced no end of trouble with my NVidia Quadro NVS 290 in TwinView dual-monitor output. Others have similar desktop TwinView woes. I want a new graphics card. Previously I asked for a graphics card recommendation and response was Nvidia Geforce GTS 450... but really I'm looking for someone who has actually got a working dual-monitor desktop to tell me what card they use so I can get something that is known to work. So please, people who have no-issues with their 64-bit Ubuntu 12.04 Unity 3D desktop spread across two HD-resolution external monitors (either DVI or HDMI connector), and who also run Google Chrome (which throws a spanner due to its own GPU compositing)... please let me know what graphics card you have so I can buy one. Gathering Options These seem to be the Nvidia cards featuring dual DVI. But they all seem to be gaming cards - what has dual-DVI, good support, but is not a massive gaming card? Nvidia GTS 450 (previously recommended) - 2x DVI Nvidia GTX 550 Ti (used by System76) - 2x DVI Nvidia GT 430 (used by System76) - 1xDVI, 1xHDMI Nvidia GT 640 (found on NVidia site) - 1xDVI, 1xHDMI (also GT 620, GT 630) Has anyone had a good desktop dual-monitor Unity 3D experience with ATI cards?

  Read the article

• Problem in VS2010 IDE in analog monitor in a dual-monitor setup

  - by Samik R.

  I am using VS2010 Premium with a dual-window setup. One of the monitors is on a digital (DVI) cable and other one is on an analog (VGA) cable. I have noticed that when I put VS2010 in the analog monitor, there are garbled texts and refresh problems while coding and/or scrolling. This does not seem to be the case when I put VS2010 in the digital monitor. Note that, I am not expanding VS IDE to use 2 screens, just making it 1 full screen, either analog or digital. Has anyone else experienced this problem? I also work with VS2008 and have not seen this problem in either screen. VS IDE has started using WPF from the 2010 release, not sure if this has something to do with it.

  Read the article

• How do I remove my Windows 7 setup from a Windows/Ubuntu dual-boot?

  - by Tom

  Previously my OS was Window 7 and some day it began to show problems with booting and finally it didn't boot at all. I tried to repair it but it didn't get repaired. Then I installed Ubuntu 14.04 LTS alongside Windows and am impressed much by Ubuntu. So I want to remove all my Windows files. I searched Google to know how to do it and I found OS-Uninstaller. I have some doubts before proceeding with OS-Uninstaller - I need to keep my photos, songs, movies and personal files in my system even if Windows is removed. Normally Windows files are installed in the C Drive. My personal files are not in the C Drive. So will removing Windows files affect my personal files ? Did the OS-Uninstaller affect Ubuntu anyway ? Please note that I want to remove only the Windows installation files(the files added to my system by Windows during its installation). I don't want to change the NTFS partition to any other format since there is a probability that I will install newer version of Windows later.

  Read the article

• How to setup whole-disk encryption with dual boot on a MacBook Pro (generation 9,2 with 12.04)

  - by blueyed

  I can install Ubuntu 12.04 on the MacBook when using the "noapic" kernel boot option, using the alternate amd64+mac image (from http://cdimage.ubuntu.com/releases/12.04/release/ ). But after installation the screen turn sblack after trying to boot "Windows" (as named in the boot menu that shows up when holding Option/Alt during startup). I want to use whole-disk encryption and given that only one free partition is available, I have setup LVM to do so: - vg0 contains bootlv and cryptlv - in cryptlv I have setup encryption with another LVM volume group (vg1, which holds swaplv, rootlv and homelv) I have not installed Grub during installation (because I was not sure about the partition) and when trying to install it later on /dev/sda4 (which contains the outer LVM) it complained that it could not determine the file system, and --force did not help either. The black screen / behavior looks similar to starting the installer without enabling the noapic option.

  Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >