Search Results

Search found 7731 results on 310 pages for 'exit failure'.

Page 14/310 | < Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >

• Won't boot after installing Ubuntu 12.04 sucessfully

  - by Matt

  I installed 12.04 successfully and rebooted (I took out my installation CD), and selected the newly installed Linux partition to boot from rEFIt. Then it just comes up with this error message: Error loading operating system which could not be more vague. Take that back. I guess it could say just "error." I don't even get to the boot prompt which limits what I can do. I cannot boot into rescue mode. I tried boot-repair, but it took more than 24 hours to check the system configuration, so I gave up on that. I'm running a Mac Mini with its main OS being Mac OS X 10.5.8. I have an alternate OS Windows XP installed, which was virtually destroyed by this Linux installation. I sacrificed my working, speedy Windows partition for something that won't even boot up. What was I thinking. My Mac partition is slow as crap. I've tried installing 12.04 many times with two different disks. The first time, I had one partition for Linux, then I had 2 (swap+main), then 3 (swap, main and BIOS), then 4 which is what I have now (swap, main, BIOS, and boot/grub). The only way I could get through the install without GRUB giving up was if I created a separate partition for it. Which was pointless, because it did install successfully, but it still doesn't boot up at all. Could rEFIt be booting off of the BIOS or one of the other partitions? Because if that's the case, there is no alternative, because Mac itself without rEFIt refuses to recognize a Linux ext4 (or 2 or 3) format partition. Apple always has to make everything so difficult. If I'm not mistaken, rEFIt is the only application of its kind for Mac. I can boot off of the CD back to the install/try screen. This is extremely upsetting, can you guys help? Please?

  Read the article

• Ubuntu 12.04 won't load - hangs at Busybox v1.18.5 / initramfs

  - by Marty

  I want to start by saying that I am very new with Linux (about 1 month using it). I have had no problems up until now. I am running Ubuntu 12.04 from a Toshiba laptop with 250 GB hard drive and 3 GB of ram. Everything worked fine yesterday. The only changes I made was was that I downloaded Banshee to try as a replacement for Rhythmbox and did a few recommended updates. This morning I tried to boot and it took a long time and I finally got this error: mount: mounting /dev/disk/by-uuid/02bc41cc-1e21-4700-a179-be2805a658c4 on /root failed: Invalid argument mount: mounting /dev on /root/dev failed: No such file or directory mount: mounting /sys on /root/sys failed: No such file or directory mount: mounting /proc on /root/proc failed: No such file or directory Target filesystem doesn't have requested /sbin/init. No init found. Try passing init= bootarg. BusyBox v1.18. (Ubuntu 1:1.18.5-1ubuntu4) built-in shell (ash) Enter 'help' for a list of built-in commands (initramfs) I'm not sure what to do beyond this point. I have read around on here and haven't found the help I need. I did try to boot it from the Live CD. I can boot up to the Try Ubuntu/Install Ubuntu screen. When I go through the Try Ubuntu selection I can't access my hard disk. When I clicked on it I got this error: Unable to mount 247 GB Filesystem Error mounting: mount: wrong fs type, bad option, bad superblock on /dev/sda/1, missing codepage or helper program, or other error. In some cases useful info is found in syslog - try dmesg|tail or so. I tried dmesg|tail and saw a string of values but nothing that looked helpful. I have also tried to boot from the GRUB screen as recovery mode and previous Linux version but they didn't work either. I tried to load Windows Recovery Environment (loader) (on /dev/sdc3) and got this message: error: no such device: 268057B1805785E9 error: hd1 cannot get C/H/S values I had saw somewhere that I could fix this with the Live CD but my knowledge isn't good enough to try. I tried something with Gpart that I had read, but the system told me that I didn't have Gpart. Could someone please explain to me what I need to do and/or haven't tried yet. Thanks so much!

  Read the article

• How to reset settings when Unity won't finish booting?

  - by Emre

  I have a new 12.04 installation and I messed things up after trying to move /home to an NTFS partition, which I later learned was a bad idea. I removed references to the NTFS partition on fstab and created new users on the ext4 / partition. Now I can't get Unity to start up properly for any user. I get the GUI with only three Launch icons (none of which are clickable) and no bar at the top. The keyboard seems to the nonfunctional after I enter my credentials. The interesting thing is that I can boot when I go through recovery mode and select resume. I wonder whether I am creating the new users properly. What is the correct protocol for doing so in order to ensure that they can run Unity?

  Read the article

• Unable to boot post upgade to 12.10 from 12.04 on a dial boot PC

  - by Prateek

  I have a dual boot PC with Win7 and Ubuntu. Last night I upgraded from 12.04 to 12.10 and since then I have not been able to boot and PC goes into grub rescue with error "File not found" I have tried the below steps set prefix=(hd0,msdos5)/boot/grub/i386-pc/ set root=(hd0,msdos5) insmod normal ( i get error symbol not found : 'grub_disk_dev_list'. when I try linux /boot/vmlinuz-3.2.0-32-generic root=/dev/sda5 ro (i get error - command not found 'linux' ) same for initrd I am not able to find out what sdXX to set also.

  Read the article

• Can not mount /dev/loop0 (/cdrom/casper/filesystem.squashfs)

  - by simpleton

  I downloaded 12.04.1 and md5 sum checked them and everything is good. Made a live usb and booted up... Just gets to where its about to start with the purple ubuntu loading screen then it goes back to text and gives this message: BusyBox v1.18.5 (Ubuntu 1:1.18.5-1ubuntu4) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) mount: mounting /dev/loop0 on ///filesystem.squashfs failed: Input/output error Can not mount /dev/loop0 (/cdrom/casper/filesystem.squashfs) on //filesystem.squashfs This happens in the live option, or persistent even the file checking one doesn't work Also I've tried a few different F6 options to no avail. I used 'LiLi USB creator' and 'unetbootin' and also 'Universal USB Installer,' all with the same results. I've also tried using a VM and it showed the same. That is when I figured I had a corrupt .iso so I downloaded it again checked the MD5: e235b63c02644e219b7bf3668f479c9e. Only I'm having the same problem. I'm just about ready to give up on 12.04.1 and just go back to 10.04 utill the next LTS comes out. I've got a dell mini 10 btw. Thanks for your time.

  Read the article

• boot up fails. drops to initramfs prompt 12.04

  - by dpm

  I am running an HP pavilion dv6000 dual boot win7 and Ubuntu 12.04. (well, up until today). after a reboot, the boot process drops to the busy box shell and i end up at the prompt: BusyBox v1.18.5 (Ubuntu 1:1.18.5-1ubuntu4) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) Ive been researching others who have had this same problem, but haven't been able to find any of those solutions to work for me. I tried the method described here: http://www.proposedsolution.com/solutions/ubuntu-booting-to-initramfs-prompt/ and after the final command mount -t ntfs-3g /dev/sda1 /root -o force it does nothing and gives me another (initramfs) prompt. I can boot to a live CD (USB) and get to a terminal, but it doesn't seem to do much good, as I can see the /dev/sda1 in the ls command, but it doesn't recognize it when I try to cd to it. My command line skills are very green, and am just starting to grasp them. One more question: using the command fdisk -l how can I tell which mount point (sda1/sda2) is my windows partition and which one is Ubuntu? Any help? I'm in a bit over my head right now...

  Read the article

• Unknown filesystem error

  - by Ben

  My computer has (had) a dual boot of Ubuntu Precise and Windows 7. Recently, when I started the computer, grub gave me an error saying "Unknown filesystem", and sent me to grub rescue. I searched for solutions to this, and found this answer: Unknown filesystem error: grub rescue. I followed the instructions there, but they didn't really help: when I restarted the computer, it went straight to Windows without grub intervening at all (so it boots successfully, just not to the OS I want). This is the log from boot-repair. My Ubuntu partition is sda6. Naturally, I'm a little worried, since the log says "unknown filesystem type ''", which to me looks like the partition might be corrupt somehow. From the Ubuntu Live CD, I started gparted and looked at my partitions, and it also told me that my sda6 is an unknown filesystem. So my questions are basically: Can I restore Ubuntu to the way it was? If not, can I at least rescue the data I had on the partition somehow? Again, if I can't restore Ubuntu, how do I clean everything up so that I can reinstall it without too many complications? Another thing I should mention is that yesterday I had a similar problem where the computer told me there was a problem with the hard drive when it was starting, but it fixed itself by running fsck (that time it got past grub, and managed to start Ubuntu). Between that occasion and me having trouble booting the computer today, I have booted it successfully at least twice. Thanks for any help!

  Read the article

• Can't boot in Ubuntu after windows upgrade

  - by VanceAnce

  After my lastest update for Ubuntu and Windows XP, I got a Grub error on booting the next day. ls lists the following (without () ): sd0 sd1, msdos sd2 sd5 sd6 When I tried to get into one with (sd0,xy)/ it doesn't detect system or unknown file system error. I tried to boot to a live session with a Knoppix live CD and found out that all data exists. I also tried to recover with TestDisk and it finds all systems. Here is the test disk result: Start End Size in sectors 1 * HPFS - NTFS 0 1 1 7079 254 63 113740137 2 E extended LBA 7080 0 1 12161 254 63 81642330 5 L HPFS - NTFS 7080 1 1 10266 254 63 51199092 [Schule] X extended 12031 30 1 12161 254 63 2102625 6 L Linux Swap 12031 31 33 12161 254 63 2102530 I've 1 winxp-home, 1x Ubuntu (ext3+swap) and 1 winxp prof and then I wrote on mbr with TestDisk but I always get the same errors with Grub. What should I do? I need both XP and Ubuntu. Help me please. more infos in answers below - sry for thos confusing style but im working on diff live system and browsers and have to reboot always the boot info script output is also down below maybe an advanced user can correct my fail posting - after i can solve my issuse i will register here thanx and pls help me with those weired issues ! as i still cant just comment my own answer or those on top i again has to put it here as a sepperate answer..... (or even edit - maybe an browser failur using the live cds ... cause this posti can edit) here the bootinfo script output - but the result is the same as with TestDisk ... but it looks worse - cause it also doesnt detect my old ubuntu ... but there wasnt a eares process or overwrite process visibile ending the last working session output: Boot Info Script 0.61 [1 April 2012] ============================= Boot Info Summary: =============================== = Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sda. sda1: __________________________________________ File system: ntfs Boot sector type: Windows XP: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows XP Boot files: /boot.ini /ntldr /NTDETECT.COM sda2: __________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sda5: __________________________________________ File system: ntfs Boot sector type: Windows XP: NTFS Boot sector info: According to the info in the boot sector, sda5 starts at sector 63. Operating System: Windows XP Boot files: sda6: __________________________________________ File system: swap Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _______________________________________ Disk /dev/sda: 100.0 GB, 100030242816 bytes 255 heads, 63 sectors/track, 12161 cylinders, total 195371568 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 63 113,740,199 113,740,137 7 NTFS / exFAT / HPFS /dev/sda2 113,740,200 195,382,529 81,642,330 f W95 Extended (LBA) /dev/sda5 113,740,263 164,939,354 51,199,092 7 NTFS / exFAT / HPFS /dev/sda6 193,280,000 195,382,529 2,102,530 82 Linux swap / Solaris /dev/sda2 ends after the last sector of /dev/sda /dev/sda6 ends after the last sector of /dev/sda "blkid" output: ____________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 6596D86768011128 ntfs /dev/sda5 1300D3B7744EC141 ntfs Schule /dev/sda6 5b95f2a1-4145-43a5-ac51-41d7dd32b213 swap ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /rofs squashfs (ro,noatime) /dev/sr0 /cdrom iso9660 (ro,noatime) ================================ sda1/boot.ini: ================================ [boot loader] timeout=30 default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Home Edition" /fastdetect /NoExecute=OptOut multi(0)disk(0)rdisk(0)partition(2)\WINDOWS="Microsoft Windows XP Professional" /fastdetect [spybotsd] timeout.old=30 the last part shows that i now use the windows boot loader so that i can acces at least one OS but shouldnt i also get acces to my ubuntu partitions with live-linux-cds ? or do i have to boot with grub to get to those files only ??

  Read the article

• How long does boot repair take?

  - by Emre

  Reinstalling Ubuntu messed up my boot loader so I I tried to fix it with boot repair. It detected my OSX installation and asked about removing the "separate boot/EFI". It also said my partition was full despite the fact that it wasn't and asked me to remove stuff. I declined both and proceeded. It's been stuck at the "purge and reinstall the GRUB" stage for half an hour. Is this typical, bearing in mind I have a fast SSD and CPU? Is there a better way to re-install grub on a multi-booting UEFI system? Does my pastebin provide any insight?

  Read the article

• How to recover after embarrassing yourself and your company?

  - by gaearon

  I work in an outsourcing company in Russia, and one of our clients is a financial company located in USA. For the last six months I have been working on several projects for this particular company, and as I was being assigned a larger project, I was invited to work onsite in USA in order to understand and learn the new system. Things didn't work out as well as I hoped because the environment was messy after original developers, and I had to spent quite some time to understand the quirks. However we managed to do the release several days ago, and it looks like everything's going pretty smooth. From technical perspective, my client seems to be happy with me. My solutions seem to work, and I always try to add some spark of creativity to what I do. However I'm very disorganized in a certain sense, as I believe many of you fellas are. Let me note that my current job is my first job ever, and I was lucky enough to get a job with flexible schedule, meaning I can come in and out of the office whenever I want as long as I have 40 hours a week filled. Sometimes I want to hang out with friends in the evening, and days after that I like to have a good sleep in the morning—this is why flexible schedule (or lack of one) is ideal fit for me. [I just realized this paragraph looks too serious, I should've decorated it with some UNICORNS!] Of course, after coming to the USA, things changed. This is not some software company with special treatment for the nerdy ones. Here you have to get up at 7:30 AM to get to the office by 9 AM and then sit through till 5 PM. Personally, I hate waking up in the morning, not to say my productivity begins to climb no sooner than at 5 o'clock, i.e. I'm very slow until I have to go, which is ironic. Sometimes I even stay for more than 8 hours just to finish my current stuff without interruptions. Anyway, I could deal with that. After all, they are paying for my trip, who am I to complain? They need me to be in their working hours to be able to discuss stuff. It makes perfect sense that fixed schedule doesn't make any sense for me. But it does makes sense that it does make sense for my client. And I am here for client, therefore sense is transferred. Awww, you got it. I was asked several times to come exactly at 9 AM but out of laziness and arrogance I didn't take these requests seriously enough. This paid off in the end—on my last day I woke up 10 minutes before final status meeting with business owner, having overslept previous day as well. Of course this made several people mad, including my client, as I ignored his direct request to come in time for two days in the row, including my final day. Of course, I didn't do it deliberately but certainly I could've ensured that I have at least two alarms to wake me up, et cetera...I didn't do that. He also emailed my boss, calling my behavior ridiculous and embarrassing for my company and saying “he's not happy with my professionalism at all”. My boss told me that “the system must work both in and out” and suggested me to stay till late night this day working in a berserker mode, fixing as many issues as possible, and sending a status email to my client. So I did, but I didn't receive the response yet. These are my questions to the great programmers community: Did you have situations where your ignorance and personal non-technical faults created problems for your company? Were you able to make up for your fault and stay in a good relationship with your client or boss? How? How would you act if you were in my situation?

  Read the article

• ubuntu stuck in a login loop after editing profile file

  - by varunit

  I'm stuck in a login loop now. What I did was edited /etc/profile as root and added the following line export PATH = /opt/my jdk 7 path/bin:$PATH After logging out and tried to login, I cannot I have tried booting in recovery mode, entered root prompt and tried to edit the file in vi but it always opens in read only mode and hence cannot be saved. I just need a way to delete that line and boot into ubuntu again. Please help me out guys..

  Read the article

• Wont boot from USB, stops at SYSLINUX copyright

  - by Steve

  Created bootable 11.10 in Windows from Universal USB Installer 1.8.6.8, upon boot in my HP Mini Netbook it displays only this: SYSLINUX 4.04 EDD 2011-04-18 Copyright (C) 1994-2011 H. Peter Anvin et al _(Blinky Cursor) I tried removing "ui" from syslinux.cfg, no change... (Re: can't install with usb pen drive, SYSLINUX problem) I also tried creating a bootable USB using unetbootin-windows-563, no change. Does anybody have any other ideas?

  Read the article

• "Bootmgr is missing...." Upon reboot [closed]

  - by Gabe

  Possible Duplicate: Install/running ubuntu on extarnal HDD with a windows laptop? Ill take you through the steps I did. Sorry if this question has already been resolved, I'm new to Ubuntu and forums in general. I have 2 internal HDDs in my computer, both with Win7. One HDD is my mothers, the other is mine. I did this because she didn't want my games on her computer, and my PCs motherboard took a crap on me, so I set up a dual boot. I also have an external HDD. This is what I am trying to install Ubuntu 12.04 on. I formatted the drive by right clicking it, then selecting "Format". It is now in NTSF format. I downloaded the Windows installer, ran it, and selected "I:/" (my externl hdd) as the install location. The download and installation ran smoothly, and it gave me the reboot prompt. I selected "Reboot now" and my PC rebooted. I was then interrupted by the "Bootmgr is missing. Press CTRL + ALT + DEL TO REBOOT" message. NOTE: I would like to use my HDD for a FULL Ubuntu installation, not the Live (i think thats what its called). I want all my files and settings from Ubuntu saved to the External drive as if it was my only drive. If you need more information just ask. Any help would be appreciated. Thanks in advance.

  Read the article

• Ubuntu - Black Screen After Suspend

  - by EssAm

  I used Ubuntu with no problems and I upgraded to 11.10 and everything was fine. But when I did my first suspend I was not able to boot again, all I got was a black screen no bios screen, nothing just blank, I tried doing hard reset but when I power on again same happens. I tried ctrl+alt+delete F1-F12 but i think the keyboard is not working, also tried booting from CD but all I got was blank screen, the hard disk light is not blinking at all so i'm assuming it's not trying to boot. My laptop is Toshiba satellite with ATI Radeon graphics. Hibernate was working fine though. I searched the net for solutions but with no luck. Any ideas?

  Read the article

• Problem in installing Ubuntu 12 using USB

  - by Hitesh Bhatt

  I have a Sony laptop (VPCEH25EN) and i am trying to install Ubuntu 12.04 LTS. I downloaded the iso named "ubuntu-12.04-desktop-amd64.iso". For installing i created a bootable USB using UltraISO. When i booted the USB it hangs and shows " Booting from USB ", I even left it for hours and it didn't moved a bit. When I booted the ISO in Virtual Box, it ran well. I even used other tools to make a bootable USB, then it says " BOOTMNGR missing ". Please help, I am new to Ubuntu and my optical drive is fried. Thanks in advance..

  Read the article

• Cannot boot into ubuntu 12.10

  - by sriram

  Below given are the steps which I followed to install ubuntu 12.10 with existing windows 8 in my machine. I downloaded ubuntu 12.10 into my disk and made it bootable from my usb by selecting that iso file. Then restared my mahine and in BIOS I selected boot from usb. Went into Linux os and selected install ubuntu alongside windows 8. It asked for memory allocation and I selected 550 GB for Ubuntu and 404GB for Windows. After that it completed ubuntu installation. The booted into my windows 8 and used easyBCD to add a new entry. Ubuntu grup2 Now the easyBCD shows, There are a total of 4 entries listed in the bootloader. Default: Windows 8 Timeout: 10 seconds EasyBCD Boot Device: C:\ Entry #1 Name: Lenovo Recovery System BCD ID: {e58d0cb6-2eae-11e2-9d20-806e6f6e6963} Device: \Device\HarddiskVolume3 Bootloader Path: \EFI\Microsoft\Boot\LrsBootMgr.efi Entry #2 Name: EFI USB Device BCD ID: {e58d0cb5-2eae-11e2-9d20-806e6f6e6963} Device: Unknown Bootloader Path: Entry #3 Name: Windows 8 BCD ID: {current} Drive: C:\ Bootloader Path: \windows\system32\winload.efi Entry #4 Name: Ubuntu 12.10 BCD ID: {6f173570-3bce-11e2-be74-c0143dd589c0} Drive: C:\ Bootloader Path: \NST\AutoNeoGrub0.mbr Next I restarted my system and in the boot options it shows windows 8 and ubuntu 12.10 When I click on ubuntu it displays, \NST\AutoNeoGrub0.mbr status 0xc000007b The application or operating system cold not be loaded because a required file is missing or contains errors. Can you help me resolve this... Thanks :)

  Read the article

• Ubuntu 12.04 suddenly will not boot after compiz crash on lockscreen

  - by schonjones

  Yesterday i went to work and closed my laptop. When i got home I couldn't get the lock screen to come back up. ctrl+alt+f2 to get to a terminal and Tried to kill compiz, compiz was not running so I tried to restart it got an error opening the display so i tried to restart lightdm again couldn't open display. so I restarted and now I am stuck on the loading screen. I tried booting in recovery mode and all options hang except root, but i'm stuck with read only. booting from a live cd I can mount the drive but again stuck with read only. I'm completely stuck here. checking my default-display-manager returns "/usr/sbin/elsa" as the only line and can't edit it. I've got an 11.10 live cd and my /home is encrypted so i can't try to back anything up at the moment either. How can i resolve this or at the least back up some of my data? Please help!

  Read the article

• 12.04 LTS boot hangs at "SP5100 TCO timer: mmio address 0xfec000f0 already in use", didn't yesterday

  - by DarkIron112

  Dual-booting Windows 7 and Ubuntu 12.04 LTS. I went to reboot from Win to Ubu, and found a few interesting things. My POST screen is covered in blocks of epileptic colors until I hit GRUB, which continues when I try to boot into Ubuntu. These color blocks don't appear when I use my on-board VGA, so I'll just attribute to that. Grub dimensions are swapped (card vs onboard, probably), but, when interfacing with onboard VGA, the Grub Timeout Counter works and when using my card, it does not (see "[!!!]" below for more information) Booting into Ubuntu directly causes the error: SP5100 TCO timer: mmio address 0xfec000f0 already in use Booting into recovery mode, meanwhile, and then "resuming normal boot" gets me to the desktop without native 1440x900 resolution and graphic drivers can't tell the monitor it's looking at (I assume this is because it's not a full graphic boot, and as it says, some drivers won't run?) [!!!] When I reboot after going into recovery mode, the countdown timer works ONCE, puts me back into default ubuntu boot, and then does not work again until after another recovery-mode boot. Windows 7 can boot perfectly with no issues whatsoever from epilepsy color blocks or driver detection. This makes me wonder /why/ the POST screen can't handle my video card anymore. Amidst all the diagnostics, I opened my case and re-seated the videocard securely, ensuring it wasn't a loose connection-- But this did nothing to help me. Hardware I am running an NVidia GeForce GTX 8800 video card in a PCI slot. I have 4.8GiB memory, an AMD Athlon II Quad-core 640 Processor, on an MSI K9N6GM Series Mobo. Onboard video is an NVidia GeForce MCP61(V/S/P) card. Note: I did not have any of these problems yesterday, and I have been using Ubuntu intensively for a week, though it's been working flawlessly for months. I've recently been using it to mod my Android phone, perhaps I messed something up in the file system?

  Read the article

• Can I prevent an IDENTIFY PACKET DEVICE command to a specific device at boot?

  - by Brian Spisak

  This is related to a previous question related to installation that is now resolved. I'm opening a new question, because I still need to get my DVD drive working. Problem: Failed boot when my ASUS DRW-24B1/ST DVD drive is attached to my asmedia ASM1061. Symptom: ata8.00: exception Emask 0x52 Sact 0x0 SErr 0xffffffff action 0xe frozen ata8: SError: { blah blah } ata8.00: failed command: IDENTIFY PACKET DEVICE ata8.00: cmd blah blah res blah blah (ATA bus error) ata8.00: status: { DRDY } ata8: hard resetting link Background: The ASM1061 is a PCIe to SATA bridge providing 2 x 6Gb/s ports and is supposed to be fully compliant to SATA specs. I just discovered in the fine print of my ASUS P8Z77-V pro motherboard that "These SATA ports are for data hard drivers only. ATAPI devices are not supported." However, I have already installed Windows 7 using this drive and I can run the Ubuntu 12.04 installer from it as well. The only time I have a problem is during Ubuntu boot when it tries an IDENTIFY PACKET DEVICE which seems to be an ATAPI command. I can't simply switch this device to another SATA port because they are already allocated to other devices. (My chipset's 2 x 6Gb/s are connected to my boot SSD and a fast HDD while the 4 x 3Gb/s ports are running a RAID 5 array.) If this can't be fixed or worked around, I suppose I'll have to go buy SATA add-in card. Blech. Thoughts: If indeed this is a device specific issue (that it doesn't support ATAPI discovery) then I can't expect - is it udev? - to work with it. But, it seems that Windows and even the Ubuntu installer work just fine. So why does udev have a problem? At the end of the day, it would be nice to have the DVD working under Ubuntu, but I can live without it. But, as this is a dual-boot machine, I can't physically disconnect it because I want it to work with Windows. (And physically disconnecting it every time I want to boot Ubuntu is NOT an option. ;-) Questions: Should this be considered a bug? My feelings are that if it works with other OS that it should probably work with Ubuntu as well. How can I work around this problem? I have a limited knowledge of linux internals, but it seems I should be able to somehow tell udev (or whatever is doing the discovery) to ignore that device. Is there a way?

  Read the article

• Communication between state machines with hidden transitions

  - by slartibartfast

  The question emerged for me in embedded programming but I think it can be applied to quite a number of general networking situations e.g. when a communication partner fails. Assume we have an application logic (a program) running on a computer and a gadget connected to that computer via e.g. a serial interface like RS232. The gadget has a red/green/blue LED and a button which disables the LED. The LEDs color can be driven by software commands over the serial interface and the state (red/green/blue/off) is read back and causes a reaction in the application logic. Asynchronous behaviour of the application logic with regard to the LED color down to a certain delay (depending on the execution cycle of the application) is tolerated. What we essentially have is a resource (the LED) which can not be reserved and handled atomically by software because the (organic) user can at any time press the button to interfere/break the software attempt to switch the LED color. Stripping this example from its physical outfit I dare to say that we have two communicating state machines A (application logic) and G (gadget) where G executes state changes unbeknownst to A (and also the other way round, but this is not significant in our example) and only A can be modified at a reasonable price. A needs to see the reaction and state of G in one piece of information which may be (slightly) outdated but not inconsistent with respect to the short time window when this information was generated on the side of G. What I am looking for is a concise method to handle such a situation in embedded software (i.e. no layer/framework like CORBA etc. available). A programming technique which is able to map the complete behaviour of both participants on classical interfaces of a classical programming language (C in this case). To complicate matters (or rather, to generalize), a simple high frequency communication cycle of A to G and back (IOW: A is rapidly polling G) is out of focus because of technical restrictions (delay of serial com, A not always active, etc.). What I currently see as a general solution is: the application logic A as one thread of execution an adapter object (proxy) PG (presenting G inside the computer), together with the serial driver as another thread a communication object between the two (A and PG) which is transactionally safe to exchange The two execution contexts (threads) on the computer may be multi-core or just interrupt driven or tasks in an RTOS. The com object contains the following data: suspected state (written by A): effectively a member of the power set of states in G (in our case: red, green, blue, off, red_or_green, red_or_blue, red_or_off...etc.) command data (written by A): test_if_off, switch_to_red, switch_to_green, switch_to_blue operation status (written by PG): operation_pending, success, wrong_state, link_broken new state (written by PG): red, green, blue, off The idea of the com object is that A writes whichever (set of) state it thinks G is in, together with a command. (Example: suspected state="red_or_green", command: "switch_to_blue") Notice that the commands issued by A will not work if the user has switched off the LED and A needs to know this. PG will pick up such a com object and try to send the command to G, receive its answer (or a timeout) and set the operation status and new state accordingly. A will take back the oject once it is no longer at operation_pending and can react to the outcome. The com object could be separated of course (into two objects, one for each direction) but I think it is convenient in nearly all instances to have the command close to the result. I would like to have major flaws pointed out or hear an entirely different view on such a situation.

  Read the article

• Fresh install of Ubuntu 12.10 won't boot on Asus X101CH Eee PC

  - by Najdmie

  I did a fresh install of Ubuntu 12.10 in my Asus X101CH Eee PC, using a live usb which I made using startup disk creator, replacing Ubuntu 12.04. The installation ran smoothly, but when I boot, it goes to a purple screen for a second, then a lot of text like the following shows up in sequence: Starting crash report submission daemon [OK] Starting CPU interrupts balancing daemon [OK] Stopping save kernel messages [OK] _ And the cursor just keeps blinking for hours. I can't log in. Pressing Alt + F2 did not bring me to console mode. I thought it might be a partition problem so I formatted the whole disk, by creating a new partition table using gparted in Ubuntu 12.04 live USB. I noticed that I can't try Ubuntu using 12.10 live USB either; it just went to a blank screen when I hit the 'try ubuntu' button. But the same problem arose. I even changed the pen drive for the live USB a couple of times. I happened to know that the Intel Atom N2600 Cedar Trail CPU in my computer is not well supported in Linux, I managed to install its drivers in Ubuntu 12.04, although the computer went blank during the installation.

  Read the article

• Ubuntu wont boot after installing Windows 8

  - by brian

  Ubuntu wont boot up after I installed Windows 8. I get this error: Windows Failed to start. "A recent hardware or software change might be the cause. To fix the problem: Insert your windows installation disc and restart your computer. Choose your language settings, and then click "next." Click "Repair your computer." If you do not have this disc, contact your system administrator or computer manufacturer for assistance. File: \ubuntu\winboot\wubildr.mbr status: 0xc000000f

  Read the article

• Removed Java replaced with newest "Sun Java", disc won't boot, and won't let me re-install grub using boot repair disc

  - by Al Rowe

  Had a minor problem with my Stock market platform. Set-up screen would freeze program. Called their tech support, got their "Linux guy", who advised remove all Java and replace, not with synaptic version, but newest Sun Java. After removing, computer auto rebooted, and went to blue mem-test screen. Showed no errors, but couldn't get back in. Tried two versions of boot repair disc from iso (checked md5sum, showed good.), but fix aborted, giving apt-error detected. Opened a terminal and typed (or copy/paste): sudo chroot "/mnt/boot-sav/sda1" apt-get -f install. My system is Ubuntu 12.04. Had a few very minor issues from install, all fixed. Also added some of my favorite gnome tricks just to make life easier, but none that could have caused this. Added script to add shortcuts to desktop, open terminal in any menu from inside it, access root terminal, etc. System was firewalled and using avast antivirus (o.k., I'm paranoid. Used to do Windows sys-op and security.) But relative newbie to Linux.

  Read the article

• boot issues - long delay, then "gave up waiting for root device"

  - by chazomaticus

  I've had this issue on and off for about two years now. I noticed it on a new (custom built) machine running 10.04 when that first came out, but then it went away until a few months ago. I've gone through a number of hard drive changes but I can't say specifically what if anything I changed hardware-wise to make it stop or start happening. I had assumed upgrading to a modern Ubuntu version would fix the issue, so I installed 12.04 beta on a spare partition last night, but it's still happening. Here's the issue. After grub loads and I select a kernel to boot, the screen goes blank save for a blinking cursor. It sits in this state for many long minutes before it finally gives up and gives me an initramfs shell with the message gave up waiting for root device (and lists the /dev/disk/by-uuid/... path it was waiting for) but no other specific diagnostic information. Now, here's the tricky part. For one, the problem is intermittent - sometimes it progresses from the blinking cursor to the Ubuntu splash boot screen in a few seconds, and once it gets that far it always continues booting fine. The really bizarre thing is that I can "force" it to "find" the root device by repeatedly pressing the space bar and hitting the machine's power button. If I tap those enough, eventually I will notice the hard drive light coming on, at which point it will always continue the boot process after a few seconds. Interestingly, if I wait slightly too long before pressing the power button (30s?), as soon as I press it I get the gave up waiting message and the initramfs shell. I've tried setting up /etc/fstab (and the grub menu.lst or whatever it's called nowadays) to use device names (e.g. /dev/sda1) instead of UUIDs, but I get the same effect just with the device name, not UUID, in the error message. I should also mention that when I boot to Windows 7, there is no issue. It boots slowly all the time just by virtue of being Windows, but it never hangs indefinitely. This would seem to indicate it's a problem in Ubuntu, not the hardware. It's pretty annoying to have to babysit the computer every time it boots. Any ideas? I'm at a loss. Not even sure how to diagnose the issue. Thanks! EDIT: Here's some dmesg output from 10.04. The 15 second gap is where it was doing nothing. I pressed the power button and space bar a few times, and the stuff at 16 seconds happened. Not sure what any of it means. [ 1.320250] scsi18 : ahci [ 1.320294] scsi19 : ahci [ 1.320320] ata19: SATA max UDMA/133 abar m8192@0xfd4fe000 port 0xfd4fe100 ir q 18 [ 1.320323] ata20: SATA max UDMA/133 abar m8192@0xfd4fe000 port 0xfd4fe180 ir q 18 [ 1.403886] usb 2-4: new high speed USB device using ehci_hcd and address 4 [ 1.562558] usb 2-4: configuration #1 chosen from 1 choice [ 16.477824] ata16: SATA link down (SStatus 0 SControl 300) [ 16.477843] ata19: SATA link down (SStatus 0 SControl 300) [ 16.477857] ata3: SATA link down (SStatus 0 SControl 300) [ 16.477895] ata15: SATA link down (SStatus 0 SControl 300) [ 16.477906] ata20: SATA link down (SStatus 0 SControl 300) [ 16.477977] ata17: SATA link down (SStatus 0 SControl 300) [ 16.478003] ata12: SATA link down (SStatus 0 SControl 300) [ 16.478046] ata13: SATA link down (SStatus 0 SControl 300) [ 16.478063] ata14: SATA link down (SStatus 0 SControl 300) [ 16.478108] ata11: SATA link down (SStatus 0 SControl 300) [ 16.478123] ata18: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 16.478127] ata6: SATA link down (SStatus 0 SControl 300) [ 16.478157] ata5: SATA link down (SStatus 0 SControl 300) [ 16.478193] ata18.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66 After that, it took its sweet time, and I had to keep hitting space bar to coax it along. Here's some more dmesg output from a little later in the boot process: [ 17.982291] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00 :13.0/usb5/5-2/5-2:1.0/input/input4 [ 17.982335] generic-usb 0003:046E:5506.0002: input,hidraw1: USB HID v1.10 Key board [BTC USB Multimedia Keyboard] on usb-0000:00:13.0-2/input0 [ 18.005211] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00 :13.0/usb5/5-2/5-2:1.1/input/input5 [ 18.005274] generic-usb 0003:046E:5506.0003: input,hiddev96,hidraw2: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-0000:00:13.0-2/input1 [ 22.484906] EXT4-fs (sda6): INFO: recovery required on readonly filesystem [ 22.484910] EXT4-fs (sda6): write access will be enabled during recovery [ 22.548542] EXT4-fs (sda6): recovery complete [ 22.549074] EXT4-fs (sda6): mounted filesystem with ordered data mode [ 32.516772] Adding 20482832k swap on /dev/sda5. Priority:-1 extents:1 across:20482832k [ 32.742540] udev: starting version 151 [ 33.002004] Bluetooth: Atheros AR30xx firmware driver ver 1.0 [ 33.008135] parport_pc 00:09: reported by Plug and Play ACPI [ 33.008186] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 33.012076] lp: driver loaded but no devices found [ 33.037271] ppdev: user-space parallel port driver [ 33.090256] lp0: using parport0 (interrupt-driven). Any clues in there?

  Read the article

• Repairing or recreating a bootloader on a multi-booting EFI GPT system

  - by Emre

  Reinstalling Ubuntu messed up my boot loader so I I tried to fix it with boot repair. It detected my OSX installation and asked about removing the "separate boot/EFI". It also said my partition was full despite the fact that it wasn't and asked me to remove stuff. I declined both and proceeded. It's been stuck at the "purge and reinstall the GRUB" stage for half an hour. Is this typical, bearing in mind I have a fast SSD and CPU? Is there a better way to re-install grub on a multi-booting UEFI system? Does my pastebin provide any insight?

  Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >