Search Results

Search found 2481 results on 100 pages for 'medium trust'.

Page 14/100 | < Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >

  • Dual Boot issues with Windows 7 and Ubuntu

    - by Michael
    I'm finding myself in a rather unique situation. I've read through just about every resource I can find about this and while things have helped me understand some background, I haven't yet been able to find a solution. So I'm asking here. I originally had just a Windows 7 64-bit OS installation on my desktop. Learning that I couldn't do anything with Apache, PHP and MySql from within a 64-bit system, I did some research and found out that I could use Ubuntu. I've installed the latest version: 11.04. I created a CD to install Ubuntu from and the install went just fine. I installed it side-by-side with Windows 7. I can boot into Ubuntu just fine through the dual-boot option. When I reboot to load Windows though, the Grub2 list shows Windows 7 (loader) and when I select this option the Windows System Recovery loads instead of the actual OS. I haven't made it past there because I didn't know what to do. I just shut the computer down and rebooted into Ubuntu. I've been working for the last hour and a half to try to figure out how to boot into the Windows 7 OS and I haven't got a clue. While I'm somewhat proficient with Windows 7, I'm totally new to Ubuntu, so if you do know what needs to happen, please keep it simple enough that I'll be able to understand. Thanks for all your help in advance. Here's the results after using the Boot Info Script: Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ============================== => Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #5 for cbh. => Windows is installed in the MBR of /dev/sdb => Grub 2 is installed in the MBR of /dev/mapper/pdc_bdadcfbdif and looks on the same drive in partition #5 for cbh. sda1: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Mounting failed: fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy sda2: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Mounting failed: fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy sda3: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Mounting failed: fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy sdb1: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: /bootmgr /Boot/BCD sdb2: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: sdb3: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: /bootmgr /boot/BCD sdb4: _________________________________________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sdb5: _________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 11.04 Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sdb6: _________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: pdc_bdadcfbdif1: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: /bootmgr /Boot/BCD pdc_bdadcfbdif2: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe pdc_bdadcfbdif3: _________________________________________________________________________ File system: Boot sector type: Unknown Boot sector info: Mounting failed: fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy mount: unknown filesystem type '' =========================== Drive/Partition Info: ============================= Drive: sda ___________________ _____________________________________________________ Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sda1 * 2,048 206,847 204,800 7 HPFS/NTFS /dev/sda2 206,911 1,440,372,735 1,440,165,825 7 HPFS/NTFS /dev/sda3 1,440,372,736 1,464,856,575 24,483,840 7 HPFS/NTFS Drive: sdb ___________________ _____________________________________________________ Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sdb1 * 2,048 206,847 204,800 7 HPFS/NTFS /dev/sdb2 206,911 1,342,554,688 1,342,347,778 7 HPFS/NTFS /dev/sdb3 1,930,344,448 1,953,521,663 23,177,216 7 HPFS/NTFS /dev/sdb4 1,342,556,158 1,930,344,447 587,788,290 5 Extended /dev/sdb5 1,342,556,160 1,896,806,399 554,250,240 83 Linux /dev/sdb6 1,896,808,448 1,930,344,447 33,536,000 82 Linux swap / Solaris Drive: pdc_bdadcfbdif ___________________ _____________________________________________________ Disk /dev/mapper/pdc_bdadcfbdif: 750.0 GB, 749999947776 bytes 255 heads, 63 sectors/track, 91182 cylinders, total 1464843648 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/mapper/pdc_bdadcfbdif1 * 2,048 206,847 204,800 7 HPFS/NTFS /dev/mapper/pdc_bdadcfbdif2 206,911 1,440,372,735 1,440,165,825 7 HPFS/NTFS /dev/mapper/pdc_bdadcfbdif3 1,440,372,736 1,464,856,575 24,483,840 7 HPFS/NTFS /dev/mapper/pdc_bdadcfbdif3 ends after the last sector of /dev/mapper/pdc_bdadcfbdif blkid -c /dev/null: ____________________________________________________________ Device UUID TYPE LABEL /dev/mapper/pdc_bdadcfbdif1 888E54CC8E54B482 ntfs SYSTEM /dev/mapper/pdc_bdadcfbdif2 C2766BF6766BEA1D ntfs OS /dev/mapper/pdc_bdadcfbdif: PTTYPE="dos" /dev/sda1 888E54CC8E54B482 ntfs SYSTEM /dev/sda2 C2766BF6766BEA1D ntfs OS /dev/sda3 BE6CA31D6CA2CF87 ntfs HP_RECOVERY /dev/sda promise_fasttrack_raid_member /dev/sdb1 20B65685B6565B7C ntfs SYSTEM /dev/sdb2 B4467A314679F508 ntfs HP /dev/sdb3 6E10B7A410B77227 ntfs FACTORY_IMAGE /dev/sdb4: PTTYPE="dos" /dev/sdb5 266f9801-cf4f-4acc-affa-2092be035f0c ext4 /dev/sdb6 1df35749-a887-45ff-a3de-edd52239847d swap /dev/sdb: PTTYPE="dos" error: /dev/mapper/pdc_bdadcfbdif3: No such file or directory error: /dev/sdc: No medium found error: /dev/sdd: No medium found error: /dev/sde: No medium found error: /dev/sdf: No medium found error: /dev/sdg: No medium found ============================ "mount | grep ^/dev output: =========================== Device Mount_Point Type Options /dev/sdb5 / ext4 (rw,errors=remount-ro,commit=0) =========================== sdb5/boot/grub/grub.cfg: =========================== # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(/dev/sdb,msdos5)' search --no-floppy --fs-uuid --set=root 266f9801-cf4f-4acc-affa-2092be035f0c if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm fi terminal_output gfxterm insmod part_msdos insmod ext2 set root='(/dev/sdb,msdos5)' search --no-floppy --fs-uuid --set=root 266f9801-cf4f-4acc-affa-2092be035f0c set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 2.6.38-8-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(/dev/sdb,msdos5)' search --no-floppy --fs-uuid --set=root 266f9801-cf4f-4acc-affa-2092be035f0c linux /boot/vmlinuz-2.6.38-8-generic-pae root=UUID=266f9801-cf4f-4acc- affa-2092be035f0c ro quiet splash vt.handoff=7 initrd /boot/initrd.img-2.6.38-8-generic-pae } menuentry 'Ubuntu, with Linux 2.6.38-8-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(/dev/sdb,msdos5)' search --no-floppy --fs-uuid --set=root 266f9801-cf4f-4acc-affa-2092be035f0c echo 'Loading Linux 2.6.38-8-generic-pae ...' linux /boot/vmlinuz-2.6.38-8-generic-pae root=UUID=266f9801-cf4f-4acc-affa-2092be035f0c ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.38-8-generic-pae } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(/dev/sdb,msdos5)' search --no-floppy --fs-uuid --set=root 266f9801-cf4f-4acc-affa-2092be035f0c linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(/dev/sdb,msdos5)' search --no-floppy --fs-uuid --set=root 266f9801-cf4f-4acc-affa-2092be035f0c linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sdb1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(/dev/sdb,msdos1)' search --no-floppy --fs-uuid --set=root 20B65685B6565B7C chainloader +1 } menuentry "Windows Recovery Environment (loader) (on /dev/sdb3)" --class windows --class os { insmod part_msdos insmod ntfs set root='(/dev/sdb,msdos3)' search --no-floppy --fs-uuid --set=root 6E10B7A410B77227 drivemap -s (hd0) ${root} chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### =============================== sdb5/etc/fstab: =============================== # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sdb5 during installation UUID=266f9801-cf4f-4acc-affa-2092be035f0c / ext4 errors=remount-ro 0 1 # swap was on /dev/sdb6 during installation UUID=1df35749-a887-45ff-a3de-edd52239847d none swap sw 0 0 =================== sdb5: Location of files loaded by Grub: =================== 900.1GB: boot/grub/core.img 825.0GB: boot/grub/grub.cfg 688.7GB: boot/initrd.img-2.6.38-8-generic-pae 688.0GB: boot/vmlinuz-2.6.38-8-generic-pae 688.7GB: initrd.img 688.0GB: vmlinuz =========================== Unknown MBRs/Boot Sectors/etc ======================= Unknown BootLoader on pdc_bdadcfbdif3 =======Devices which don't seem to have a corresponding hard drive============== sdc sdd sde sdf sdg =============================== StdErr Messages: =============================== ERROR: dos: partition address past end of RAID device hexdump: /dev/mapper/pdc_bdadcfbdif3: No such file or directory hexdump: /dev/mapper/pdc_bdadcfbdif3: No such file or directory ERROR: dos: partition address past end of RAID device

    Read the article

  • ActAs and OnBehalfOf support in WIF

    I discussed a time ago how WIF supported a new WS-Trust 1.4 element, ActAs, and how that element could be used for authentication delegation.  The thing is that there is another feature in WS-Trust 1.4 that also becomes handy for this kind of scenario, and I did not mention in that last post, OnBehalfOf. Shiung Yong wrote an excellent summary about the difference of these two new features in this forum thread. He basically commented the following, An ActAs RST element indicates that the requestor...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Can’t Miss Webinar: The Nine Cs of Customer Engagement

    - by Christie Flanagan
    In recent years, we’ve seen social media evolve from a cool but unproven medium to become the foundation of pragmatic social business and a driver of business value.  Yet, with the onset of social media fatigue, time seems to be running out for businesses to make the most out of this important channel for customer engagement. Attend our upcoming webcast to hear industry analyst R “Ray” Wang of Constellation Research explain how to apply the nine Cs of customer engagement. Hosted by Senior Director of Evangelism for Oracle WebCenter, Christian Finn, this webcast promises a lively discussion where you'll learn: How to overcome social media fatigue and make the most of the medium Why engagement is the most critical factor in the age of overexposure The nine pillars of successful customer engagement This event is part of our Social Business Thought Leaders Webcast Series featuring industry experts with leading perspectives about how social tools, technology, and the changing workplace are affecting businesses today. You can register for upcoming webcasts or view past webcasts on demand here.

    Read the article

  • The fastest way to resize images from ASP.NET. And it’s (more) supported-ish.

    - by Bertrand Le Roy
    I’ve shown before how to resize images using GDI, which is fairly common but is explicitly unsupported because we know of very real problems that this can cause. Still, many sites still use that method because those problems are fairly rare, and because most people assume it’s the only way to get the job done. Plus, it works in medium trust. More recently, I’ve shown how you can use WPF APIs to do the same thing and get JPEG thumbnails, only 2.5 times faster than GDI (even now that GDI really ultimately uses WIC to read and write images). The boost in performance is great, but it comes at a cost, that you may or may not care about: it won’t work in medium trust. It’s also just as unsupported as the GDI option. What I want to show today is how to use the Windows Imaging Components from ASP.NET APIs directly, without going through WPF. The approach has the great advantage that it’s been tested and proven to scale very well. The WIC team tells me you should be able to call support and get answers if you hit problems. Caveats exist though. First, this is using interop, so until a signed wrapper sits in the GAC, it will require full trust. Second, the APIs have a very strong smell of native code and are definitely not .NET-friendly. And finally, the most serious problem is that older versions of Windows don’t offer MTA support for image decoding. MTA support is only available on Windows 7, Vista and Windows Server 2008. But on 2003 and XP, you’ll only get STA support. that means that the thread safety that we so badly need for server applications is not guaranteed on those operating systems. To make it work, you’d have to spin specialized threads yourself and manage the lifetime of your objects, which is outside the scope of this article. We’ll assume that we’re fine with al this and that we’re running on 7 or 2008 under full trust. Be warned that the code that follows is not simple or very readable. This is definitely not the easiest way to resize an image in .NET. Wrapping native APIs such as WIC in a managed wrapper is never easy, but fortunately we won’t have to: the WIC team already did it for us and released the results under MS-PL. The InteropServices folder, which contains the wrappers we need, is in the WicCop project but I’ve also included it in the sample that you can download from the link at the end of the article. In order to produce a thumbnail, we first have to obtain a decoding frame object that WIC can use. Like with WPF, that object will contain the command to decode a frame from the source image but won’t do the actual decoding until necessary. Getting the frame is done by reading the image bytes through a special WIC stream that you can obtain from a factory object that we’re going to reuse for lots of other tasks: var photo = File.ReadAllBytes(photoPath); var factory = (IWICComponentFactory)new WICImagingFactory(); var inputStream = factory.CreateStream(); inputStream.InitializeFromMemory(photo, (uint)photo.Length); var decoder = factory.CreateDecoderFromStream( inputStream, null, WICDecodeOptions.WICDecodeMetadataCacheOnLoad); var frame = decoder.GetFrame(0); We can read the dimensions of the frame using the following (somewhat ugly) code: uint width, height; frame.GetSize(out width, out height); This enables us to compute the dimensions of the thumbnail, as I’ve shown in previous articles. We now need to prepare the output stream for the thumbnail. WIC requires a special kind of stream, IStream (not implemented by System.IO.Stream) and doesn’t directlyunderstand .NET streams. It does provide a number of implementations but not exactly what we need here. We need to output to memory because we’ll want to persist the same bytes to the response stream and to a local file for caching. The memory-bound version of IStream requires a fixed-length buffer but we won’t know the length of the buffer before we resize. To solve that problem, I’ve built a derived class from MemoryStream that also implements IStream. The implementation is not very complicated, it just delegates the IStream methods to the base class, but it involves some native pointer manipulation. Once we have a stream, we need to build the encoder for the output format, which could be anything that WIC supports. For web thumbnails, our only reasonable options are PNG and JPEG. I explored PNG because it’s a lossless format, and because WIC does support PNG compression. That compression is not very efficient though and JPEG offers good quality with much smaller file sizes. On the web, it matters. I found the best PNG compression option (adaptive) to give files that are about twice as big as 100%-quality JPEG (an absurd setting), 4.5 times bigger than 95%-quality JPEG and 7 times larger than 85%-quality JPEG, which is more than acceptable quality. As a consequence, we’ll use JPEG. The JPEG encoder can be prepared as follows: var encoder = factory.CreateEncoder( Consts.GUID_ContainerFormatJpeg, null); encoder.Initialize(outputStream, WICBitmapEncoderCacheOption.WICBitmapEncoderNoCache); The next operation is to create the output frame: IWICBitmapFrameEncode outputFrame; var arg = new IPropertyBag2[1]; encoder.CreateNewFrame(out outputFrame, arg); Notice that we are passing in a property bag. This is where we’re going to specify our only parameter for encoding, the JPEG quality setting: var propBag = arg[0]; var propertyBagOption = new PROPBAG2[1]; propertyBagOption[0].pstrName = "ImageQuality"; propBag.Write(1, propertyBagOption, new object[] { 0.85F }); outputFrame.Initialize(propBag); We can then set the resolution for the thumbnail to be 96, something we weren’t able to do with WPF and had to hack around: outputFrame.SetResolution(96, 96); Next, we set the size of the output frame and create a scaler from the input frame and the computed dimensions of the target thumbnail: outputFrame.SetSize(thumbWidth, thumbHeight); var scaler = factory.CreateBitmapScaler(); scaler.Initialize(frame, thumbWidth, thumbHeight, WICBitmapInterpolationMode.WICBitmapInterpolationModeFant); The scaler is using the Fant method, which I think is the best looking one even if it seems a little softer than cubic (zoomed here to better show the defects): Cubic Fant Linear Nearest neighbor We can write the source image to the output frame through the scaler: outputFrame.WriteSource(scaler, new WICRect { X = 0, Y = 0, Width = (int)thumbWidth, Height = (int)thumbHeight }); And finally we commit the pipeline that we built and get the byte array for the thumbnail out of our memory stream: outputFrame.Commit(); encoder.Commit(); var outputArray = outputStream.ToArray(); outputStream.Close(); That byte array can then be sent to the output stream and to the cache file. Once we’ve gone through this exercise, it’s only natural to wonder whether it was worth the trouble. I ran this method, as well as GDI and WPF resizing over thirty twelve megapixel images for JPEG qualities between 70% and 100% and measured the file size and time to resize. Here are the results: Size of resized images   Time to resize thirty 12 megapixel images Not much to see on the size graph: sizes from WPF and WIC are equivalent, which is hardly surprising as WPF calls into WIC. There is just an anomaly for 75% for WPF that I noted in my previous article and that disappears when using WIC directly. But overall, using WPF or WIC over GDI represents a slight win in file size. The time to resize is more interesting. WPF and WIC get similar times although WIC seems to always be a little faster. Not surprising considering WPF is using WIC. The margin of error on this results is probably fairly close to the time difference. As we already knew, the time to resize does not depend on the quality level, only the size does. This means that the only decision you have to make here is size versus visual quality. This third approach to server-side image resizing on ASP.NET seems to converge on the fastest possible one. We have marginally better performance than WPF, but with some additional peace of mind that this approach is sanctioned for server-side usage by the Windows Imaging team. It still doesn’t work in medium trust. That is a problem and shows the way for future server-friendly managed wrappers around WIC. The sample code for this article can be downloaded from: http://weblogs.asp.net/blogs/bleroy/Samples/WicResize.zip The benchmark code can be found here (you’ll need to add your own images to the Images directory and then add those to the project, with content and copy if newer in the properties of the files in the solution explorer): http://weblogs.asp.net/blogs/bleroy/Samples/WicWpfGdiImageResizeBenchmark.zip WIC tools can be downloaded from: http://code.msdn.microsoft.com/wictools To conclude, here are some of the resized thumbnails at 85% fant:

    Read the article

  • ASP.NET 4 Website Fails to Start on Your TFS 2010 Server?

    - by jdanforth
    Getting a “Could not find permission set named ‘ASP.Net’” error on your TFS 2010 server? It may have to do with the fact you’re trying to run ASP.NET as a child site of a SharePoint Web Site. The problem is described in the “ASP.NET 4 braking changes” site:   This error occurs because the ASP.NET 4 code access security (CAS) infrastructure looks for a permission set named ASP.Net. However, the partial trust configuration file that is referenced by WSS_Minimal does not contain any permission sets with that name. Currently there is not a version of SharePoint available that is compatible with ASP.NET. As a result, you should not attempt to run an ASP.NET 4 Web site as a child site underneath SharePoint Web sites.   There is a workaround you could try by setting this in your web.config, if you know what you’re doing: <trust level="Full" originUrl="" />

    Read the article

  • Create a Self Signed Sertificate on WLS 10.3.5 Supporting SHA 256 Algorthim.

    - by adejuanc
    1) Set domain to call the keytool $. setDomainEnv.sh 2) Generate the key $ keytool -genkey -alias selfsignedcert -keyalg RSA -sigalg SHA256withRSA -keypass privatepassword -keystore identity.jks -storepass password -validity 365 What is your first and last name? [Unknown]: adejuan-desktop.cl.oracle.com What is the name of your organizational unit? [Unknown]: a What is the name of your organization? [Unknown]: e What is the name of your City or Locality? [Unknown]: i What is the name of your State or Province? [Unknown]: o What is the two-letter country code for this unit? [Unknown]: U Is CN=adejuan-desktop.cl.oracle.com, OU=a, O=e, L=i, ST=o, C=U correct? [no]: yes 3) Export the root certificate $ keytool -export -alias selfsignedcert -sigalg SHA256withRSA -file root.cer -keystore identity.jks Enter keystore password: Certificate stored in file <root.cer> 4) Import the root certificate to the trust store $ keytool -import -alias selfsignedcert -sigalg SHA256withRSA -trustcacerts -file root.cer -keystore trust.jks Enter keystore password: Re-enter new password: Owner: CN=adejuan-desktop.cl.oracle.com, OU=a, O=e, L=i, ST=o, C=U Issuer: CN=adejuan-desktop.cl.oracle.com, OU=a, O=e, L=i, ST=o, C=U Serial number: 4f17459a Valid from: Wed Jan 16 15:33:22CLST 2012 until: Thu Jan 15 15:33:22 CLST 2013 Certificate fingerprints: MD5: 7F:08:FA:DE:CD:D5:C3:D3:83:ED:B8:4F:F2:DA:4E:A1 SHA1: 87:E4:7C:B8:D7:1A:90:53:FE:1B:70:B6:32:22:5B:83:29:81:53:4B Signature algorithm name: SHA256withRSA Version: 3 Trust this certificate? [no]: yes Certificate was added to keystore 5) To check the contents of the keystore keytool -v -list -keystore identity.jks Enter keystore password: ***************** WARNING WARNING WARNING ***************** * The integrity of the information stored in your keystore * * has NOT been verified! In order to verify its integrity, * * you must provide your keystore password. * ***************** WARNING WARNING WARNING ***************** Keystore type: JKS Keystore provider: SUN Your keystore contains 1 entry Alias name: selfsignedcert Creation date: Jan 18, 2012 Entry type: PrivateKeyEntry Certificate chain length: 1 Certificate[1]: Owner: CN=adejuan-desktop.cl.oracle.com, OU=a, O=e, L=i, ST=o, C=U Issuer: CN=adejuan-desktop.cl.oracle.com, OU=a, O=e, L=i, ST=o, C=U Serial number: 4f17459a Valid from: Wed Jan 16 15:42:16CLST 2012 until: Thu Jan 15 15:42:16 CLST 2013 Certificate fingerprints: MD5: 7F:08:FA:DE:CD:D5:C3:D3:83:ED:B8:4F:F2:DA:4E:A1 SHA1: 87:E4:7C:B8:D7:1A:90:53:FE:1B:70:B6:32:22:5B:83:29:81:53:4B Signature algorithm name: SHA256withRSA Version: 3 ******************************************* ******************************************* 6) In some cases, this parameter is needed in the server start up parameters. -Dweblogic.ssl.JSSEEnabled=true Otherwise, enable it from the Server configuration -> SSL -> Use JSSE checkbox.

    Read the article

  • Are there code reviews in opensource projects? If so, what tools are used to do this?

    - by monksy
    I know there is a big push for code reviews in commercial development. However, are code reviews used in open source software or is based on trust? If so, then how are they performed? [Is it a delayed commit, "a pre commit environment", is there a tool that allows for the patch to be sent to another dev]? Are there any projects that use code reviews? From my understanding the linux kernel is mostly based around trust of the commitor. MySQL was based on the main author's approval and the performance impact.

    Read the article

  • Why is my Internet connection randomly dropping?

    - by Jeanno
    Ever since I have installed 12.04 (clean install not an upgrade), i have been having a drop in the Internet connection. The drop in the connection can be anything from 15 seconds to about 3 mins, and then the connection comes back. This behaviour happens while I am actively browsing the Internet, or if I wake up the computer and open Firefox (sometimes I have connection and sometimes I don't) . Please note that when the internet connection is on, it is not slow (as speedtest.net results show) In the beginning, I thought it was a problem with the driver r8169 for my RTL8111/8168B Ethernet card, so I downloaded the r8168 from Realtek website, followed the detailed instructions (blacklisted r8169, changed the file to '.bsh' ...), but still the same problem persisted. So I switched to a wireless connection, and I got the same problem with internet connection dropping randomly. Any ideas? Thanks in advance Output from 'lspci -v' Code: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: f8000000-fa0fffff Prefetchable memory behind bridge: 00000000d0000000-00000000dbffffff Capabilities: [88] Subsystem: Dell Device 04a7 Capabilities: [80] Power Management version 3 Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [a0] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Capabilities: [140] Root Complex Link Kernel driver in use: pcieport Kernel modules: shpchp 00:01.1 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: f4000000-f60fffff Prefetchable memory behind bridge: 00000000c0000000-00000000cbffffff Capabilities: [88] Subsystem: Dell Device 04a7 Capabilities: [80] Power Management version 3 Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [a0] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Capabilities: [140] Root Complex Link Kernel driver in use: pcieport Kernel modules: shpchp 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 52 Memory at f6108000 (64-bit, non-prefetchable) [size=16] Capabilities: [50] Power Management version 3 Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+ Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) (prog-if 20 [EHCI]) Subsystem: Dell Device 04a7 Flags: bus master, medium devsel, latency 0, IRQ 16 Memory at f6107000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCI Advanced Features Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 53 Memory at f6100000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel Capabilities: [130] Root Complex Link Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: fa400000-fa4fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Dell Device 04a7 Capabilities: [a0] Power Management version 2 Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Prefetchable memory behind bridge: 00000000dc100000-00000000dc1fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Dell Device 04a7 Capabilities: [a0] Power Management version 2 Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fa300000-fa3fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Dell Device 04a7 Capabilities: [a0] Power Management version 2 Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fa200000-fa2fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Dell Device 04a7 Capabilities: [a0] Power Management version 2 Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) (prog-if 20 [EHCI]) Subsystem: Dell Device 04a7 Flags: bus master, medium devsel, latency 0, IRQ 23 Memory at f6106000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCI Advanced Features Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge: Intel Corporation P67 Express Chipset Family LPC Controller (rev 05) Subsystem: Dell Device 04a7 Flags: bus master, medium devsel, latency 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> Kernel modules: iTCO_wdt 00:1f.2 RAID bus controller: Intel Corporation 82801 SATA Controller [RAID mode] (rev 05) Subsystem: Dell Device 04a7 Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 42 I/O ports at f070 [size=8] I/O ports at f060 [size=4] I/O ports at f050 [size=8] I/O ports at f040 [size=4] I/O ports at f020 [size=32] Memory at f6105000 (32-bit, non-prefetchable) [size=2K] Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [70] Power Management version 3 Capabilities: [a8] SATA HBA v1.0 Capabilities: [b0] PCI Advanced Features Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) Subsystem: Dell Device 04a7 Flags: medium devsel, IRQ 5 Memory at f6104000 (64-bit, non-prefetchable) [size=256] I/O ports at f000 [size=32] Kernel modules: i2c-i801 01:00.0 VGA compatible controller: NVIDIA Corporation Device 0dc5 (rev a1) (prog-if 00 [VGA controller]) Subsystem: NVIDIA Corporation Device 085b Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at f8000000 (32-bit, non-prefetchable) [size=16M] Memory at d0000000 (64-bit, prefetchable) [size=128M] Memory at d8000000 (64-bit, prefetchable) [size=32M] I/O ports at e000 [size=128] Expansion ROM at fa000000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Capabilities: [b4] Vendor Specific Information: Len=14 <?> Capabilities: [100] Virtual Channel Capabilities: [128] Power Budgeting <?> Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?> Kernel driver in use: nouveau Kernel modules: nouveau, nvidiafb 01:00.1 Audio device: NVIDIA Corporation GF106 High Definition Audio Controller (rev a1) Subsystem: NVIDIA Corporation Device 085b Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at fa080000 (32-bit, non-prefetchable) [size=16K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 02:00.0 VGA compatible controller: NVIDIA Corporation Device 0dc5 (rev a1) (prog-if 00 [VGA controller]) Subsystem: NVIDIA Corporation Device 085b Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f4000000 (32-bit, non-prefetchable) [size=32M] Memory at c0000000 (64-bit, prefetchable) [size=128M] Memory at c8000000 (64-bit, prefetchable) [size=64M] I/O ports at d000 [size=128] Expansion ROM at f6000000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Capabilities: [b4] Vendor Specific Information: Len=14 <?> Capabilities: [100] Virtual Channel Capabilities: [128] Power Budgeting <?> Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?> Kernel driver in use: nouveau Kernel modules: nouveau, nvidiafb 02:00.1 Audio device: NVIDIA Corporation GF106 High Definition Audio Controller (rev a1) Subsystem: NVIDIA Corporation Device 085b Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at f6080000 (32-bit, non-prefetchable) [size=16K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 03:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30 [XHCI]) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at fa400000 (64-bit, non-prefetchable) [size=8K] Capabilities: [50] Power Management version 3 Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [90] MSI-X: Enable+ Count=8 Masked- Capabilities: [a0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff Capabilities: [150] Latency Tolerance Reporting Kernel driver in use: xhci_hcd 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 51 I/O ports at c000 [size=256] Memory at dc104000 (64-bit, prefetchable) [size=4K] Memory at dc100000 (64-bit, prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Endpoint, MSI 01 Capabilities: [b0] MSI-X: Enable- Count=4 Masked- Capabilities: [d0] Vital Product Data Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Capabilities: [160] Device Serial Number 03-00-00-00-68-4c-e0-00 Kernel driver in use: r8168 Kernel modules: r8168 05:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series Firewire Controller (rev 01) (prog-if 10 [OHCI]) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at fa300000 (64-bit, non-prefetchable) [size=2K] I/O ports at b000 [size=256] Capabilities: [50] Power Management version 3 Capabilities: [80] MSI: Enable- Count=1/1 Maskable+ 64bit+ Capabilities: [98] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [130] Device Serial Number 00-10-dc-ff-ff-cf-56-1a Kernel driver in use: firewire_ohci Kernel modules: firewire-ohci 06:00.0 SATA controller: JMicron Technology Corp. JMB362 SATA Controller (rev 10) (prog-if 01 [AHCI 1.0]) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 19 I/O ports at a040 [size=8] I/O ports at a030 [size=4] I/O ports at a020 [size=8] I/O ports at a010 [size=4] I/O ports at a000 [size=16] Memory at fa210000 (32-bit, non-prefetchable) [size=512] Capabilities: [8c] Power Management version 3 Capabilities: [50] Express Legacy Endpoint, MSI 00 Kernel driver in use: ahci Note that my wireless card is not showing, I have the Ralink 3390 card (which apparently does not show up on Ubuntu for some reason), however I am able to connect to wireless network and connect to the internet (when it is working)

    Read the article

  • OAM11gR2: Enabling SSL in the Data Store

    - by Ekta Malik
    Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Enabling SSL in the Data Store of OAM11gR2 comprises of the below mentioned steps. Import the certificate/s required for establishing the trust with the Store(backend) in the keystore(cacerts) on the machine hosting OAM's Weblogic Admin server Restart the Weblogic Admin server Specify the <Hostname>:<SSL port> in the "Location" field of the Data Store and select the "Enable SSL" checkbox Pre-requisite:- Certificate/s to be imported are available for import Data Store has already been created using OAM admin console and the connection to the store is successful on non-SSL port( though one can always create a Data Store with SSL settings on the first go) Steps for importing the certificate/s:- One can use the keytool utility that comes bundled with JDK to import the certificate. The step for importing the certificate would be same for self-signed and third party certificates (like VeriSign) $JAVA_HOME/bin/keytool -import -v -noprompt -trustcacerts -alias <aliasname> -file <Path to the certificate file> -keystore $JAVA_HOME/jre/lib/security/cacerts Here $JAVA_HOME refers to the path of JDK install directory Note: In case multiple certificates are required for establishing the trust, import all those certificates using the same keytool command mentioned above  One can verify the import of the certificate/s by using the below mentioned command $JAVA_HOME/bin/keytool -list -alias <aliasname>-v -keystore $JAVA_HOME/jre/lib/security/cacerts When the trust gets established for the SSL communication, specifying the SSL specific settings in the Data Store (via OAM admin console) wouldn't result into the previously seen error (when Certificates are yet to be imported) and the "Test Connection" would be successful.

    Read the article

  • How to escape this in the bash script?

    - by allenskd
    I'm trying to complete a batch of 3 videos to leave it there till morning processing but it seems there are special characters in it... I try it "raw" in the terminal and it works but in bash script it stops working Example: args1="-r 29.97 -t 00:13:30 -vsync 0 -vpre libx264-medium -i" args12="-r 29.97 -ss 00:40:30 -vsync 0 -vpre libx264-medium -i" args2="[in] scale=580:380 [T1],[T1] pad=720:530:0:50 (other arguments with lots of [ and ]" In the output it says Unable to find a suitable output format for 'scale=580:380' not sure why... like I said, the command runs fine in the command-line, just not in the script /usr/local/bin/ffmpeg "$args1" "${file}" -vf "$args2" "$args3" "${args[0]}_${startingfrom}_0001_02.mp4"

    Read the article

  • World Record Oracle E-Business Consolidated Workload on SPARC T4-2

    - by Brian
    Oracle set a World Record for the Oracle E-Business Suite Standard Medium multiple-online module benchmark using Oracle's SPARC T4-2 and SPARC T4-4 servers which ran the application and database. Oracle's SPARC T4 servers demonstrate performance leadership and world-record results on Oracle E-Business Suite Applications R12 OLTP benchmark by publishing the first result using multiple concurrent online application modules with Oracle Database 11g Release 2 running Solaris.   This results shows that a multi-tier configuration of SPARC T4 servers running the Oracle E-Business Suite R12.1.2 application and Oracle Database 11g Release 2 is capable of supporting 4,100 online users with outstanding response-times, executing a mix of complex transactions consolidating 4 Oracle E-Business modules (iProcurement, Order Management, Customer Service and HR Self-Service).   The SPARC T4-2 server in the application tier utilized about 65% and the SPARC T4-4 server in the database tier utilized about 30%, providing significant headroom for additional Oracle E-Business Suite R12.1.2 processing modules, more online users, and future growth.   Oracle E-Business Suite Applications were run in Oracle Solaris Containers on SPARC T4 servers and provides a consolidation platform for multiple E-Business instances.   Performance Landscape Multiple Online Modules (Self-Service, Order-Management, iProcurement, Customer-Service) Medium Configuration System Users AverageResponse Time 90th PercentileResponse Time SPARC T4-2 4,100 2.08 sec 2.52 sec Configuration Summary Application Tier Configuration: 1 x SPARC T4-2 server 2 x SPARC T4 processors, 2.85 GHz 256 GB memory 3 x 300 GB internal disks Oracle Solaris 10 Oracle E-Business Suite 12.1.2 Database Tier Configuration: 1 x SPARC T4-4 server 4 x SPARC T4 processors, 3.0 GHz 256 GB memory 2 x 300 GB internal disks Oracle Solaris 10 Oracle Solaris Containers Oracle Database 11g Release 2 Storage Configuration: 1 x Sun Storage F5100 Flash Array (80 x 24 GB flash modules) Benchmark Description The Oracle R12 E-Business Suite Standard Benchmark combines online transaction execution by simulated users with multiple online concurrent modules to model a typical scenario for a global enterprise. The online component exercises the common UI flows which are most frequently used by a majority of our customers. This benchmark utilized four concurrent flows of OLTP transactions, for Order to Cash, iProcurement, Customer Service and HR Self-Service and measured the response times. The selected flows model simultaneous business activities inclusive of managing customers, services, products and employees. See Also Oracle R12 E-Business Suite Standard Benchmark Results Oracle R12 E-Business Suite Standard Benchmark Overview Oracle R12 E-Business Benchmark Description E-Business Suite Applications R2 (R12.1.2) Online Benchmark - Using Oracle Database 11g on Oracle's SPARC T4-2 and Oracle's SPARC T4-4 Servers oracle.com SPARC T4-2 Server oracle.com OTN SPARC T4-4 Server oracle.com OTN Oracle E-Business Suite oracle.com OTN Oracle Solaris oracle.com OTN Oracle Database 11g Release 2 Enterprise Edition oracle.com OTN Disclosure Statement Oracle E-Business Suite R12 medium multiple-online module benchmark, SPARC T4-2, SPARC T4, 2.85 GHz, 2 chips, 16 cores, 128 threads, 256 GB memory, SPARC T4-4, SPARC T4, 3.0 GHz, 4 chips, 32 cores, 256 threads, 256 GB memory, average response time 2.08 sec, 90th percentile response time 2.52 sec, Oracle Solaris 10, Oracle Solaris Containers, Oracle E-Business Suite 12.1.2, Oracle Database 11g Release 2, Results as of 9/30/2012.

    Read the article

  • Contracting rate for Android development

    - by Robottinosino
    I am a developer, maybe I have a project to work on, not sure how much to "charge" for my work.... Help me find the price? Looking for an contracting rate interval, expressed in EUR, to offer for an Android development gig. Location: Europe, off-site (telecommuting) Environment: Android + HTTP back-end Length of project: 1 month Rate currency: EUR Rate measure: daily or hourly Other skills required: UI design, basic J2EE, web services Client profile: medium business (100+ employees) Previous published apps: 1, on G-Play Design work: partially already done, data flow is established, data models to be built Required graphics/multimedia elements: provided by the client Source control: remove over SSH Team size: one person in development, others (unknown) for marketing, copy, etc. Risk factor: medium Client reputation: modest but established Potential for continued work: absent (for now) Internationalisation/localisation: no Native code (C/C++,...): none, only Android SDK, pure Java Working culture: (based on initial discussion) - high pressure Other projects in the pipe: zero Opportunity to learn from the project or build new skills: 5% Negotiating experience: good Cost of accessories: (licenses, device to debug on) zero If I need to be more precise, please just say how and I will be.

    Read the article

  • ASP.NET MVC 3 Hosting :: Deploying ASP.NET MVC 3 web application to server where ASP.NET MVC 3 is not installed

    - by mbridge
    You can built sample application on ASP.NET MVC 3 for deploying it to your hosting first. To try it out first put it to web server where ASP.NET MVC 3 installed. In this posting I will tell you what files you need and where you can find them. Here are the files you need to upload to get application running on server where ASP.NET MVC 3 is not installed. Also you can deploying ASP.NET MVC 3 web application to server where ASP.NET MVC 3 is not installed like this example: you can change reference to System.Web.Helpers.dll to be the local one so it is copied to bin folder of your application. First file in this list is my web application dll and you don’t need it to get ASP.NET MVC 3 running. All other files are located at the following folder: C:\Program Files\Microsoft ASP.NET\ASP.NET Web Pages\v1.0\Assemblies\ If there are more files needed in some other scenarios then please leave me a comment here. And… don’t forget to convert the folder in IIS to application. While developing an application locally, this isn’t a problem. But when you are ready to deploy your application to a hosting provider, this might well be a problem if the hoster does not have the ASP.NET MVC assemblies installed in the GAC. Fortunately, ASP.NET MVC is still bin-deployable. If your hosting provider has ASP.NET 3.5 SP1 installed, then you’ll only need to include the MVC DLL. If your hosting provider is still on ASP.NET 3.5, then you’ll need to deploy all three. It turns out that it’s really easy to do so. Also, ASP.NET MVC runs in Medium Trust, so it should work with most hosting providers’ Medium Trust policies. It’s always possible that a hosting provider customizes their Medium Trust policy to be draconian. Deployment is easy when you know what to copy in archive for publishing your web site on ASP.NET MVC 3 or later versions. What I like to do is use the Publish feature of Visual Studio to publish to a local directory and then upload the files to my hosting provider. If your hosting provider supports FTP, you can often skip this intermediate step and publish directly to the FTP site. The first thing I do in preparation is to go to my MVC web application project and expand the References node in the project tree. Select the aforementioned three assemblies and in the Properties dialog, set Copy Local to True. Now just right click on your application and select Publish. This brings up the following Publish wizard Notice that in this example, I selected a local directory. When I hit Publish, all the files needed to deploy my app are available in the directory I chose, including the assemblies that were in the GAC. Another ASP.NET MVC 3 article: - New Features in ASP.NET MVC 3 - ASP.NET MVC 3 First Look

    Read the article

  • Is your IP address neighborhood important for SEO?

    - by Evgeny
    Can other websites on your shared host affect the rank of your website in the Google index? (same IP address as yours, potentially malicious/low-trust content) Can other websites on your IP class affect the rank of your website in the Google index? (different actual IP, malicious/low-trust content) Clarification: Domain class, is what you get when you run a whois query on an IP address. Example: NetRange: 69.163.128.0 - 69.163.255.255 CIDR: 69.163.128.0/17 PS: Prefer answers with experience or links to trustworthy material, over speculations, assumptions and gut feelings.

    Read the article

  • How to Deal with a Difficult Boss?

    - by Anonymous
    I have some problems with my boss, it's quite a long story :) About one year ago, I'm working as team leader of project X. Everything work fine until one of my fellow (staff) flame me that I have problem with ALL member in our team, that guy also flame me to other staff that I report them with a poor performance. My boss call me and blame me without ask a single question. I try to explain everything to my boss but she doesn't listen to me. One month later, we have a meeting. This is only team leader's meeting, my boss talk about this problem with other team leader. There are two person who have worked with this guy, they all say "This guy cannot trust". That guy had do same thing same problem with his former team leader. Finally, everything's clear and I think I gain some trust from her. I can say that I'm the best team leader in her hand, as only project that archive more than 120% profit. Then I move to new project, this is bigger project and I can manage it quite good. But I have a problem again. One of my staff always leave and does not follow our company rule, I call him to talk and tell him that you cannot do this because that's not allow in our company. He also changed working time record file of himself, then I call him to warn again. This time he ask me to move to another project so I go to talk to my boss. She come to my building when I'm not there (other staff call me) and talk with that guy (who have problem with me); I think she still not trust me. And AGAIN, she believe what that guy said and I got blamed. I want to know how can I deal with this kind of boss, or is it better to find a new job, or any other suggestion about this problem? Thank you :) Additional information: Even my job title is "Team Leader" but it's my responsibility to manage staff working time and their behavior. This responsible is my company's rule.

    Read the article

  • WIF-less claim extraction from ACS: SWT

    - by Elton Stoneman
    WIF with SAML is solid and flexible, but unless you need the power, it can be overkill for simple claim assertion, and in the REST world WIF doesn’t have support for the latest token formats.  Simple Web Token (SWT) may not be around forever, but while it's here it's a nice easy format which you can manipulate in .NET without having to go down the WIF route. Assuming you have set up a Relying Party in ACS, specifying SWT as the token format: When ACS redirects to your login page, it will POST the SWT in the first form variable. It comes through in the BinarySecurityToken element of a RequestSecurityTokenResponse XML payload , the SWT type is specified with a TokenType of http://schemas.xmlsoap.org/ws/2009/11/swt-token-profile-1.0 : <t:RequestSecurityTokenResponse xmlns:t="http://schemas.xmlsoap.org/ws/2005/02/trust">   <t:Lifetime>     <wsu:Created xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">2012-08-31T07:31:18.655Z</wsu:Created>     <wsu:Expires xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">2012-08-31T09:11:18.655Z</wsu:Expires>   </t:Lifetime>   <wsp:AppliesTo xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy">     <EndpointReference xmlns="http://www.w3.org/2005/08/addressing">       <Address>http://localhost/x.y.z</Address>     </EndpointReference>   </wsp:AppliesTo>   <t:RequestedSecurityToken>     <wsse:BinarySecurityToken wsu:Id="uuid:fc8d3332-d501-4bb0-84ba-d31aa95a1a6c" ValueType="http://schemas.xmlsoap.org/ws/2009/11/swt-token-profile-1.0" EncodingType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"> [ base64string ] </wsse:BinarySecurityToken>   </t:RequestedSecurityToken>   <t:TokenType>http://schemas.xmlsoap.org/ws/2009/11/swt-token-profile-1.0</t:TokenType>   <t:RequestType>http://schemas.xmlsoap.org/ws/2005/02/trust/Issue</t:RequestType>   <t:KeyType>http://schemas.xmlsoap.org/ws/2005/05/identity/NoProofKey</t:KeyType> </t:RequestSecurityTokenResponse> Reading the SWT is as simple as base-64 decoding, then URL-decoding the element value:     var wrappedToken = XDocument.Parse(HttpContext.Current.Request.Form[1]);     var binaryToken = wrappedToken.Root.Descendants("{http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd}BinarySecurityToken").First();     var tokenBytes = Convert.FromBase64String(binaryToken.Value);     var token = Encoding.UTF8.GetString(tokenBytes);     var tokenType = wrappedToken.Root.Descendants("{http://schemas.xmlsoap.org/ws/2005/02/trust}TokenType").First().Value; The decoded token contains the claims as key/value pairs, along with the issuer, audience (ACS realm), expiry date and an HMAC hash, which are in query string format. Separate them on the ampersand, and you can write out the claim values in your logged-in page:     var decoded = HttpUtility.UrlDecode(token);     foreach (var part in decoded.Split('&'))     {         Response.Write("<pre>" + part + "</pre><br/>");     } - which will produce something like this: http://schemas.microsoft.com/ws/2008/06/identity/claims/authenticationinstant=2012-08-31T06:57:01.855Z http://schemas.microsoft.com/ws/2008/06/identity/claims/authenticationmethod=http://schemas.microsoft.com/ws/2008/06/identity/authenticationmethod/windows http://schemas.microsoft.com/ws/2008/06/identity/claims/windowsaccountname=XYZ http://schemas.xmlsoap.org/ws/2005/05/identity/claims/[email protected] http://schemas.xmlsoap.org/ws/2005/05/identity/claims/[email protected] http://schemas.microsoft.com/accesscontrolservice/2010/07/claims/identityprovider=http://fs.svc.xyz.com/adfs/services/trust Audience=http://localhost/x.y.z ExpiresOn=1346402225 Issuer=https://x-y-z.accesscontrol.windows.net/ HMACSHA256=oDCeEDDAWEC8x+yBnTaCLnzp4L6jI0Z/xNK95PdZTts= The HMAC hash lets you validate the token to ensure it hasn’t been tampered with. You'll need the token signing key from ACS, then you can re-sign the token and compare hashes. There's a full implementation of an SWT parser and validator here: How To Request SWT Token From ACS And How To Validate It At The REST WCF Service Hosted In Windows Azure, and a cut-down claim inspector on my github code gallery: ACS Claim Inspector. Interestingly, ACS lets you have a value for your logged-in page which has no relation to the realm for authentication, so you can put this code into a generic claim inspector page, and set that to be your logged-in page for any relying party where you want to check what's being sent through. Particularly handy with ADFS, when you're modifying the claims provided, and want to quickly see the results.

    Read the article

  • What is the most effective way to add functionality to unfamiliar, structurally unsound code?

    - by Coder
    This is probably something everyone has to face during the development sooner or later. You have an existing code written by someone else, and you have to extend it to work under new requirements. Sometimes it's simple, but sometimes the modules have medium to high coupling and medium to low cohesion, so the moment you start touching anything, everything breaks. And you don't feel that it's fixed correctly when you get the new and old scenarios working again. One approach would be to write tests, but in reality, in all cases I've seen, that was pretty much impossible (reliance on GUI, missing specifications, threading, complex dependencies and hierarchies, deadlines, etc). So everything sort of falls back to good ol' cowboy coding approach. But I refuse to believe there is no other systematic way that would make everything easier. Does anyone know a better approach, or the name of the methodology that should be used in such cases?

    Read the article

  • Preventing pop-up dialogs when connecting an MTP device

    - by DrownedSensors
    I'm using Lubuntu 14.04 with a Samsung Galaxy S3 running Android 4.3. Each time I connect my phone via USB, I get the following dialog: Unable to open MTP device '[usb:002,023]' A few moments later, I get the "Removable medium is inserted" dialog, prompting me to open in File Manager. After that, the phone is connected and fully accessible. So MTP works. The problem is that I plug in my phone to charge every time I sit down, and unplug it every time I step away. Dismissing these two dialogs every time is a pain. I would think the "Removable medium" dialog is the easier candidate. How do I tell Ubuntu to take no action and stop prompting me? For the MTP error, all the discussion I can find is for people who can't get MTP working at all. For me, it's working, but only after throwing this initial error. I've verified that my device is present in /lib/udev/rules.d/69-libmtp.rules

    Read the article

  • Given a RGB color x, how to find the most contrasting color y?

    - by Arthur Wulf White
    I have to mark a certain item in a way that will make it stick-out in the background. I need it to be surrounded with the color that contrasts the background as much as possible so it will pop out and easily noticeable by the player. Lets say I know the background is color 'x', how do I find 'y' such that it will be very contrasting to 'x' and easy to notice in a background where 'x' is a dominant color? I first thought about inverting color 'x' and then I noticed that when 'x' is a medium shade of gray, if I invert 'x' to get 'y', then 'y' is also a medium shade of gray which does not work.

    Read the article

  • How to connect to a WCF service using IP of the host machine where the service is hosted?

    - by Kumar
    I have a secured WCF service (https://<MachineName>:sslport/services) self hosted in a machine. Different instances of same service are deployed in differnt machines. From a client app, I am able to connect to theses services through code, i.e. using ChannelFactory() with the same endpoint address. But if I try to access the service using the endpoint address as https://<ipAddress>:sslport/services replacing machines name with machine IP address, I am getting some error stating "could not establish trust relationship". I know this is an error caused by SSL certificate that it could not establish a trust relationship. Are there any settings or any possibilities to make this work?

    Read the article

  • curl can't verify cert using capath, but can with cacert option

    - by phylae
    I am trying to use curl to connect to a site using HTTPS. But curl is failing to verify the SSL cert. $ curl --verbose --capath ./certs/ --head https://example.com/ * About to connect() to example.com port 443 (#0) * Trying 1.1.1.1... connected * Connected to example.com (1.1.1.1) port 443 (#0) * successfully set certificate verify locations: * CAfile: none CApath: ./certs/ * SSLv3, TLS handshake, Client hello (1): * SSLv3, TLS handshake, Server hello (2): * SSLv3, TLS handshake, CERT (11): * SSLv3, TLS alert, Server hello (2): * SSL certificate problem, verify that the CA cert is OK. Details: error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed * Closing connection #0 curl: (60) SSL certificate problem, verify that the CA cert is OK. Details: error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed More details here: http://curl.haxx.se/docs/sslcerts.html curl performs SSL certificate verification by default, using a "bundle" of Certificate Authority (CA) public keys (CA certs). If the default bundle file isn't adequate, you can specify an alternate file using the --cacert option. If this HTTPS server uses a certificate signed by a CA represented in the bundle, the certificate verification probably failed due to a problem with the certificate (it might be expired, or the name might not match the domain name in the URL). If you'd like to turn off curl's verification of the certificate, use the -k (or --insecure) option. I know about the -k option. But I do actually want to verify the cert. The certs directory has been properly hashed with c_rehash . and it contains: A Verisign intermediate cert Two self-signed certs The above site should be verified with the Verisign intermediate cert. When I use the --cacert option instead (and point directly to the Verisign cert) curl is able to verify the SSL cert. $ curl --verbose --cacert ./certs/verisign-intermediate-ca.crt --head https://example.com/ * About to connect() to example.com port 443 (#0) * Trying 1.1.1.1... connected * Connected to example.com (1.1.1.1) port 443 (#0) * successfully set certificate verify locations: * CAfile: ./certs/verisign-intermediate-ca.crt CApath: /etc/ssl/certs * SSLv3, TLS handshake, Client hello (1): * SSLv3, TLS handshake, Server hello (2): * SSLv3, TLS handshake, CERT (11): * SSLv3, TLS handshake, Server finished (14): * SSLv3, TLS handshake, Client key exchange (16): * SSLv3, TLS change cipher, Client hello (1): * SSLv3, TLS handshake, Finished (20): * SSLv3, TLS change cipher, Client hello (1): * SSLv3, TLS handshake, Finished (20): * SSL connection using RC4-SHA * Server certificate: * subject: C=US; ST=State; L=City; O=Company; OU=ou1; CN=example.com * start date: 2011-04-17 00:00:00 GMT * expire date: 2012-04-15 23:59:59 GMT * common name: example.com (matched) * issuer: C=US; O=VeriSign, Inc.; OU=VeriSign Trust Network; OU=Terms of use at https://www.verisign.com/rpa (c)10; CN=VeriSign Class 3 Secure Server CA - G3 * SSL certificate verify ok. > HEAD / HTTP/1.1 > User-Agent: curl/7.19.7 (x86_64-pc-linux-gnu) libcurl/7.19.7 OpenSSL/0.9.8k zlib/1.2.3.3 libidn/1.15 > Host: example.com > Accept: */* > < HTTP/1.1 404 Not Found HTTP/1.1 404 Not Found < Cache-Control: must-revalidate,no-cache,no-store Cache-Control: must-revalidate,no-cache,no-store < Content-Type: text/html;charset=ISO-8859-1 Content-Type: text/html;charset=ISO-8859-1 < Content-Length: 1267 Content-Length: 1267 < Server: Jetty(7.2.2.v20101205) Server: Jetty(7.2.2.v20101205) < * Connection #0 to host example.com left intact * Closing connection #0 * SSLv3, TLS alert, Client hello (1): In addition, if I try hitting one of the sites using a self signed cert and the --capath option, it also works. (Let me know if I should post an example of that.) This implies that curl is finding the cert directory, and it is properly hash. Finally, I am able to verify the SSL cert with openssl, using its -CApath option. $ openssl s_client -CApath ./certs/ -connect example.com:443 CONNECTED(00000003) depth=3 /C=US/O=VeriSign, Inc./OU=Class 3 Public Primary Certification Authority verify return:1 depth=2 /C=US/O=VeriSign, Inc./OU=VeriSign Trust Network/OU=(c) 2006 VeriSign, Inc. - For authorized use only/CN=VeriSign Class 3 Public Primary Certification Authority - G5 verify return:1 depth=1 /C=US/O=VeriSign, Inc./OU=VeriSign Trust Network/OU=Terms of use at https://www.verisign.com/rpa (c)10/CN=VeriSign Class 3 Secure Server CA - G3 verify return:1 depth=0 /C=US/ST=State/L=City/O=Company/OU=ou1/CN=example.com verify return:1 --- Certificate chain 0 s:/C=US/ST=State/L=City/O=Company/OU=ou1/CN=example.com i:/C=US/O=VeriSign, Inc./OU=VeriSign Trust Network/OU=Terms of use at https://www.verisign.com/rpa (c)10/CN=VeriSign Class 3 Secure Server CA - G3 --- Server certificate -----BEGIN CERTIFICATE----- <cert removed> -----END CERTIFICATE----- subject=/C=US/ST=State/L=City/O=Company/OU=ou1/CN=example.com issuer=/C=US/O=VeriSign, Inc./OU=VeriSign Trust Network/OU=Terms of use at https://www.verisign.com/rpa (c)10/CN=VeriSign Class 3 Secure Server CA - G3 --- No client certificate CA names sent --- SSL handshake has read 1563 bytes and written 435 bytes --- New, TLSv1/SSLv3, Cipher is RC4-SHA Server public key is 2048 bit Secure Renegotiation IS NOT supported Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : RC4-SHA Session-ID: D65C4C6D52E183BF1E7543DA6D6A74EDD7D6E98EB7BD4D48450885188B127717 Session-ID-ctx: Master-Key: 253D4A3477FDED5FD1353D16C1F65CFCBFD78276B6DA1A078F19A51E9F79F7DAB4C7C98E5B8F308FC89C777519C887E2 Key-Arg : None Start Time: 1303258052 Timeout : 300 (sec) Verify return code: 0 (ok) --- QUIT DONE How can I get curl to verify this cert using the --capath option?

    Read the article

  • Ubuntu 12.04 UEFI Partition Boot Fail

    - by John
    I've built a new system, and I want to take full advantage of UEFI and Ubuntu. So I install Ubuntu, and try to boot from it, and my BIOS (Asus EZ Mode / Advanced Mode) simply says "No bootable medium found. Insert Bootable Medium and press any key to try again." So I've reinstalled several times, without any failures, Ubuntu IS installed, and I've tried Ubuntu Boot Repair (link below) and nothing I do seems to work. My Build: Asus f1a75m pro AMD A8 APU Samsung 1TB HDD 8GB G-Skill Ripjaws X (1866) Partitions and Ubuntu Boot Repair here

    Read the article

  • How to Choose the Best SEO Expert

    The internet has turned out to be one of the most powerful marketing tools ever invented by man. Its reach of millions of people is several times more than any other medium. Web marketing and web promotion are today an integral part of the sales plans of any medium or large scaled enterprise. As the world rapidly moves to the internet, if your company does not have a website today, you will not be able to make a place for yourself in the future. Irrespective of the business the company is involved in, its presence on the internet is absolutely unavoidable nowadays.

    Read the article

  • How to push through a domain transfer in spite of the 60 day rule

    - by corsiKa
    I recently purchased a domain through a registrar which I won't name here. Within the first five minutes of logging in, I found a severe vulnerability that allows me access to all registration details of all users. Simply put, I do not trust this registrar with any kind of business. But I'm unable to transfer the domain because, for some reason, it has to exist in its current state for 60 days. We're planning to launch the site this weekend - we can't wait 60 days. But I can not trust this registrar: if I found such a severe vulnerability in the first few minutes, how many more similar un-trustables will I find in those 60 days? Is there a higher authority to whom I can submit a case to get my domain transferred to a different registrar?

    Read the article

  • Bug severity classification issues

    - by KyleMinn
    In a book I have, there is a following classification of defect: Critical : A defect receives a “critical” severity level if one or more critical system functionalities are impaired by a defect with is impaired and there is no workaround. High: A defect receives a “high” severity level if some fundamental system functionalities are impaired but a workaround exists. Medium: A defect receives a “medium” severity level if no critical functionality is impaired and a workaround exists for the defect. Low: A defect receives a “low” severity level if the problem involves a cosmetic feature of the system. To be honest, I do not get it.. For example point 2. What if fundamental but not critical feature is impaired and there is NOT a workaround. The same for point 3: what if no critical functionality is affected but there is no workaround? E.g. optional field in the registration form does not work. No workaround but barely an issue.

    Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >