Search Results

Search found 407 results on 17 pages for 'purge'.

Page 14/17 | < Previous Page | 10 11 12 13 14 15 16 17  | Next Page >

  • Reset rc.d so software starts at boot again

    - by natli
    I ran the following 2 commands on my VPS box and now it boots without starting any software at all. According to rcconf it's still supposed to start my chosen software (ssh etc.) but it doesn't. update-rc.d vz defaults update-rc.d vzeventd defaults I already tried removing them again with update-rc.d -f vz remove update-rc.d -f vzeventd remove But that didnt't change anything. /etc/rc.local also still correctly lists some scripts I want to run at start-up, but they don't seem to be called either. I expect the top 2 commands to be responsible, but here's everything I did: mkdir /var/openvz-dl cd /var/openvz-dl wget http://download.openvz.org/kernel/branches/rhel6-2.6.32/042stab062.2/vzkernel-2.6.32-042stab062.2.x86_64.rpm wget http://download.openvz.org/kernel/branches/rhel6-2.6.32/042stab062.2/vzkernel-devel-2.6.32-042stab062.2.x86_64.rpm wget http://download.openvz.org/utils/vzctl/4.0/vzctl-4.0-1.x86_64.rpm wget http://download.openvz.org/utils/vzctl/4.0/vzctl-core-4.0-1.x86_64.rpm wget http://download.openvz.org/utils/ploop/1.5/ploop-1.5-1.x86_64.rpm wget http://download.openvz.org/utils/ploop/1.5/ploop-lib-1.5-1.x86_64.rpm wget http://download.openvz.org/utils/vzquota/3.1/vzquota-3.1-1.x86_64.rpm apt-get install fakeroot alien fakeroot alien --to-deb --scripts --keep-version vz*.rpm ploop*.rpm dpkg -i vz*.deb ploop*.deb --force-overwrite update-rc.d vz defaults update-rc.d vzeventd defaults reboot A huge part of that failed because I was running it on an OpenVZ VPS which has a shared kernel that can't be altered, so I also had to fix the dpkg like so (it was moaning about wanting to install vzkernel with a package not being found); rm /var/lib/dpkg/info/vzkernel* dpkg-reconfigure vzkernel --force dpkg --purge --force-all vzkernel But that didn't fix the boot issue either. How do I make my software start at boot again?

    Read the article

  • What are the typical methods used to scale up/out email storage servers?

    - by nareshov
    Hi, What I've tried: I have two email storage architectures. Old and new. Old: courier-imapds on several (18+) 1TB-storage servers. If one of them show signs of running out of disk space, we migrate a few email accounts to another server. the servers don't have replicas. no backups either. New: dovecot2 on a single huge server with 16TB (SATA) storage and a few SSDs we store fresh mails on the SSDs and run a doveadm purge to move mails older than a day to the SATA disks there is an identical server which has a max-15min-old rsync backup from the primary server higher-ups/management wanted to pack in as much storage as possible per server in order to minimise the cost of SSDs per server the rsync'ing is done because GlusterFS wasn't replicating well under that high small/random-IO. scaling out was expected to be done with provisioning another pair of such huge servers on facing disk-crunch issues like in the old architecture, manual moving of email accounts would be done. Concerns/doubts: I'm not convinced with the synchronously-replicated filesystem idea works well for heavy random/small-IO. GlusterFS isn't working for us yet, I'm not sure if there's another filesystem out there for this use case. The idea was to keep identical pairs and use DNS round-robin for email delivery and IMAP/POP3 access. And if one the servers went down for whatever reasons (planned/unplanned), we'd move the IP to the other server in the pair. In filesystems like Lustre, I get the advantage of a single namespace whereby I do not have to worry about manually migrating accounts around and updating MAILHOME paths and other metadata/data. Questions: What are the typical methods used to scale up/out with the traditional software (courier-imapd / dovecot)? Do traditional software that store on a locally mounted filesystem pose a roadblock to scale out with minimal "problems"? Does one have to re-write (parts of) these to work with an object-storage of some sort - such as OpenStack object storage?

    Read the article

  • Safe to remove Python2.6 files?

    - by darkfeline
    I'm using Linux Mint 11 (will upgrade soon), and I've noticed that, even though I don't have any python2.6 packages installed with apt, there's a bunch of residual python2.6 files scattered around my drive, including, but not limited to, dist-packages in /usr/lib/python2.6 and various /usr/share stuff. Is there any way to test if these files are still being used? I'm tempted to sudo rm -rf the lot of them, but I'm scared it'll break stuff. Also, does anyone have any idea where these files could have come from? I believe I had python2.6 installed once upon a time, but I made sure to --purge them, so there shouldn't be any trace of them left, right? EDIT: after using a quick script to check all of the files, it appears most of them belong to important packages, so I won't try weeding out the few which I know are probably useless. Although I am curious why so many packages have python2.6 files when I don't even have it installed. These files are not associated with any packages and I'm not sure if they are safe to remove: /usr/bin/ipython2.6 /usr/lib/python2.6/dist-packages/distribute-0.6.15.egg-info /usr/lib/python2.6/dist-packages/easy_install.py /usr/lib/python2.6/dist-packages/IPython /usr/lib/python2.6/dist-packages/ipython-0.10.1.egg-info /usr/lib/python2.6/dist-packages/setuptools /usr/lib/python2.6/dist-packages/setuptools.egg-info /usr/lib/python2.6/dist-packages/setuptools.pth /usr/lib/python2.6/dist-packages/site.py /usr/lib/python2.6/dist-packages/wx.pth /usr/local/lib/python2.6 /usr/local/lib/python2.6/dist-packages /usr/local/lib/python2.6/site-packages /usr/share/man/man1/ipython2.6.1.gz

    Read the article

  • How do I set up postfix to store e-mail in a file instead of relaying it?

    - by GomoX
    I want to run a staging copy of a production server on a local environment. The system runs a PHP application, which sends e-mail to customers in various scenarios and I want to make sure no e-mail is ever sent from the staging environment. I can tweak the code so it uses a dummy e-mail sender, but i'd like to run the exact same code as the production environment. I can use a different MTA (Postfix is just what we use in production), but I'd like something that is easy to set up under Debian/Ubuntu :) So, I'd like to set up the local Postfix install to store all e-mail in (one or more) files instead of relaying it. Actually, I don't really care how it's stored as long as it's feasible to check the e-mail that was sent. Even a set up option that tells postfix to keep the e-mail in the mail queue would work (I can purge the queue when I reload the staging server with a copy from production). I know this is possible, I just haven't found any good solution online for what seems like a fairly common need. Thanks!

    Read the article

  • Ubuntu's garbage collection cron job for PHP sessions takes 25 minutes to run, why?

    - by Lamah
    Ubuntu has a cron job set up which looks for and deletes old PHP sessions: # Look for and purge old sessions every 30 minutes 09,39 * * * * root [ -x /usr/lib/php5/maxlifetime ] \ && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 \ -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir \ fuser -s {} 2> /dev/null \; -delete My problem is that this process is taking a very long time to run, with lots of disk IO. Here's my CPU usage graph: The cleanup running is represented by the teal spikes. At the beginning of the period, PHP's cleanup jobs were scheduled at the default 09 and 39 minutes times. At 15:00 I removed the 39 minute time from cron, so a cleanup job twice the size runs half as often (you can see the peaks get twice as wide and half as frequent). Here are the corresponding graphs for IO time: And disk operations: At the peak where there were about 14,000 sessions active, the cleanup can be seen to run for a full 25 minutes, apparently using 100% of one core of the CPU and what seems to be 100% of the disk IO for the entire period. Why is it so resource intensive? An ls of the session directory /var/lib/php5 takes just a fraction of a second. So why does it take a full 25 minutes to trim old sessions? Is there anything I can do to speed this up? The filesystem for this device is currently ext4, running on Ubuntu Precise 12.04 64-bit. EDIT: I suspect that the load is due to the unusual process "fuser" (since I expect a simple rm to be a damn sight faster than the performance I'm seeing). I'm going to remove the use of fuser and see what happens.

    Read the article

  • Can't upgrade MySQL Server on new Ubuntu 12.04 install

    - by user179627
    After freshly installing Ubuntu server 12.04, I did the usual apt-get update / apt-get upgrade, which failed for mysql-server-5.5: Setting up mysql-server-5.5 (5.5.31-0ubuntu0.12.04.2) ... start: Job failed to start invoke-rc.d: initscript mysql, action "start" failed. dpkg: error processing mysql-server-5.5 (--configure): subprocess installed post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of mysql-server: mysql-server depends on mysql-server-5.5; however: Package mysql-server-5.5 is not configured yet. dpkg: error processing mysql-server (--configure): dependency problems - leaving unconfigured I tried a wide variety a approaches suggested by googling, which involved various combinations of apt-get remove/purge/install -f/reinstall, etc., with no luck. I also tried downloading the package directly from launchpad.net and running dpkg -i on it (this had worked for a similar issue with a kernel upgrade), but to no avail. I'm not actually particularly interested in what's going on with mysql, per se (though I will need to figure it out at some time); at this point, my primary concern is that I am unable to apt-get install other packages! What to do?

    Read the article

  • SOA 10g Developing a Simple Hello World Process

    - by [email protected]
    Softwares & Hardware Needed Intel Pentium D CPU 3 GHz, 2 GB RAM, Windows XP System ( Thats what i am using ) You could as well use Linux , but please choose High End RAM 10G SOA Suite from Oracle(TM) , Read Installation documents at www.Oracle.com J Developer 10.1.3.3 Official Documents at http://www.oracle.com/technology/products/ias/bpel/index.html java -version Java HotSpot(TM) Client VM (build 1.5.0_06-b05, mixed mode)BPEL Introduction - Developing a Simple Hello World Process  Synchronous BPEL Process      This Exercise focuses on developing a Synchronous Process, which mean you give input to the BPEL Process you get output immediately no waiting at all. The Objective of this exercise is to give input as name and it greets with Hello Appended by that name example, if I give input as "James" the BPEL process returns "Hello James". 1. Open the Oracle JDeveloper click on File -> New Application give the name "JamesApp" you can give your own name if it pleases you. Select the folder where you want to place the application. Click "OK" 2. Right Click on the "JamesApp" in the Application Navigator, Select New Menu. 3. Select "Projects" under "General" and "BPEL Process Project", click "OK" these steps remain same for all BPEL Projects 4. Project Setting Wizard Appears, Give the "Process Name" as "MyBPELProc" and Namespace as http://xmlns.james.com/ MyBPELProc, Select Template as "Synchronous BPEL Process click "Next" 5. Accept the input and output schema names as it is, click "Finish" 6. You would see the BPEL Process Designer, some of the folders such as Integration content and Resources are created and few more files 7. Assign Activity : Allows Assigning values to variables or copying values of one variable to another and also do some string manipulation or mathematical operations In the component palette at extreme right, select Process Activities from the drop down, and drag and drop "Assign" between "receive Input" and "replyOutput" 8. You can right click and edit the Assign activity and give any suitable name "AssignHello", 9. Select "Copy Operation" Tab create "Copy Operation" 10. In the From variables click on expression builder, select input under "input variable", Click on insert into expression bar, complete the concat syntax, Note to use "Ctrl+space bar" inside expression window to Auto Populate the expression as shown in the figure below. What we are actually doing here is concatenating the String "Hello ", with the variable value received through the variable named "input" 11. Observe that once an expression is completed the "To Variable" is assigned to a variable by name "result" 12. Finally the copy variable looks as below 13. It's the time to deploy, start the SOA Suite 14. Establish connection to the Server from JDeveloper, this can be done adding a New Application Server under Connection, give the server name, username and password and test connection. 15. Deploy the "MyBPELProc" to the "default domain" 16. http://localhost:8080/ allows connecting to SOA Suite web portal, click on "BPEL Control" , login with the username "oc4jadmin" password what ever you gave during installation 17. "MyBPELProc" is visisble under "Deployed BPEL Processes" in the "Dashboard" Tab, click on the it 18. Initiate tab open to accept input, enter data such as input is "James" click on "Post XML Button" 19. Click on Visual Flow 20. Click on receive Input , it shows "James" as input received 21. Click on reply Output, it shows "Hello James" so the BPEL process is successfully executed. 22. It may be worth seeing all the instance created everytime a BPEL process is executed by giving some inputs. Purge All button allows to delete all the unwanted previous instances of BPEL process, dont worry it wont delete the BPEL process itself :-) 23. It may also be some importance to understand the XSD File which holds input & output variable names & data types. 24. You could drag n drop variables as elements over sequence at the designer or directly edit the XML Source file. 

    Read the article

  • How to remove window applet from Gnome3?

    - by Filip Nowak
    I installed today window applet for Gnome3 from this webupd8 post. The effect of the installation shown in the picture. I tried apt-get remove --purge and nothing happens. How do I remove this window applet? http://i.stack.imgur.com/D1s9b.jpg When i try metacity --replace &unity [1] 3171 Checking if settings need to be migrated ...no Checking if internal files need to be migrated ...no Backend : gconf Integration : true Profile : default Adding plugins Skipping upgrade com.canonical.unity.unity.01.upgrade Skipping upgrade com.canonical.unity.unity.02.upgrade Initializing core options...done Initializing bailer options...done Initializing detection options...done Initializing composite options...done Initializing opengl options...done Initializing decor options...done Initializing move options...done Initializing vpswitch options...done Initializing gnomecompat options...done Initializing grid options...done Initializing mousepoll options...done Initializing place options...done Initializing resize options...done Initializing animation options...done Initializing wall options...done Initializing session options...done Initializing workarounds options...done Initializing wobbly options...done compiz (expo) - Warn: failed to bind image to texture Initializing expo options...done Initializing ezoom options...done Initializing staticswitcher options...done Initializing fade options...done Initializing scale options...done Screen geometry changed: 0x0x1920x1080 Initializing unityshell options...done DEBUG 2012-02-19 21:22:40 glib <unknown>:0 Setting to primary screen rect: x=0 y=0 w=1920 h=1080 WARN 2012-02-19 21:22:40 unity.favorites FavoriteStoreGSettings.cpp:138 Unable to load GDesktopAppInfo for 'bluefish.desktop' WARN 2012-02-19 21:22:40 unity.favorites FavoriteStoreGSettings.cpp:138 Unable to load GDesktopAppInfo for 'filezilla.desktop' WARN 2012-02-19 21:22:40 unity.favorites FavoriteStoreGSettings.cpp:138 Unable to load GDesktopAppInfo for 'gimp.desktop' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' Setting Update "texture_filter" Setting Update "sync_to_vblank" Setting Update "fullscreen_visual_bell" Setting Update "panel_opacity" Setting Update "launcher_opacity" Setting Update "icon_size" WARN 2012-02-19 21:23:32 unity.glib.dbusproxy GLibDBusProxy.cpp:255 Cannot call method InfoRequest proxy /com/canonical/unity/lens/applications does not exist WARN 2012-02-19 21:23:32 unity.glib.dbusproxy GLibDBusProxy.cpp:255 Cannot call method SetActive proxy /com/canonical/unity/lens/applications does not exist WARN 2012-02-19 21:23:32 unity.glib.dbusproxy GLibDBusProxy.cpp:255 Cannot call method InfoRequest proxy /com/canonical/unity/lens/commands does not exist WARN 2012-02-19 21:23:32 unity.glib.dbusproxy GLibDBusProxy.cpp:255 Cannot call method SetActive proxy /com/canonical/unity/lens/commands does not exist WARN 2012-02-19 21:23:32 unity.glib.dbusproxy GLibDBusProxy.cpp:255 Cannot call method InfoRequest proxy /com/canonical/unity/lens/files does not exist WARN 2012-02-19 21:23:32 unity.glib.dbusproxy GLibDBusProxy.cpp:255 Cannot call method SetActive proxy /com/canonical/unity/lens/files does not exist WARN 2012-02-19 21:23:32 unity.glib.dbusproxy GLibDBusProxy.cpp:255 Cannot call method InfoRequest proxy /com/canonical/unity/lens/music does not exist WARN 2012-02-19 21:23:32 unity.glib.dbusproxy GLibDBusProxy.cpp:255 Cannot call method SetActive proxy /com/canonical/unity/lens/music does not exist WARN 2012-02-19 21:23:33 unity.iconloader IconLoader.cpp:509 Unable to load contents of file:///usr/share/icons/unity-icon-theme/places/svg/category-available.svg: Blad podczas otwierania pliku: Nie ma takiego pliku ani katalogu WARN 2012-02-19 21:23:33 unity.iconloader IconLoader.cpp:509 Unable to load contents of file:///usr/share/icons/unity-icon-theme/places/svg/category-installed.svg: Blad podczas otwierania pliku: Nie ma takiego pliku ani katalogu

    Read the article

  • How to I fix software center after installing the Linux Mint MATE desktop?

    - by tinuz
    I installed the MATE desktop using this manual but now i can't open my Ubuntu Software Center and can't open the settings from the update manager. I removed mate desktop but it doesn't fix the problem, i also reinstalled the software center, software-properties-gtk and software-properties-common using: sudo apt-get update; sudo apt-get --purge --reinstall install software-center software-properties-common software-properties-gtk. But when using this line i get the following error: Reading package lists... Done Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 3 reinstalled, 0 to remove and 0 not upgraded. Need to get 0 B/735 kB of archives. After this operation, 0 B of additional disk space will be used. (Reading database ... 304824 files and directories currently installed.) Preparing to replace software-center 5.0.2 (using .../software-center_5.0.2_all.deb) ... Unpacking replacement software-center ... Preparing to replace software-properties-common 0.81.13.1 (using .../software-properties-common_0.81.13.1_all.deb) ... Unpacking replacement software-properties-common ... Preparing to replace software-properties-gtk 0.81.13.1 (using .../software-properties-gtk_0.81.13.1_all.deb) ... Unpacking replacement software-properties-gtk ... Processing triggers for desktop-file-utils ... Processing triggers for gnome-menus ... Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for hicolor-icon-theme ... Processing triggers for man-db ... Processing triggers for shared-mime-info ... Unknown media type in type 'all/all' Unknown media type in type 'all/allfiles' Unknown media type in type 'uri/mms' Unknown media type in type 'uri/mmst' Unknown media type in type 'uri/mmsu' Unknown media type in type 'uri/pnm' Unknown media type in type 'uri/rtspt' Unknown media type in type 'uri/rtspu' Unknown media type in type 'interface/x-winamp-skin' Setting up software-center (5.0.2) ... Traceback (most recent call last): File "/usr/sbin/update-software-center", line 38, in <module> from softwarecenter.db.update import rebuild_database File "/usr/share/software-center/softwarecenter/db/update.py", line 59, in <module> from softwarecenter.db.database import parse_axi_values_file File "/usr/share/software-center/softwarecenter/db/database.py", line 26, in <module> from softwarecenter.db.application import Application File "/usr/share/software-center/softwarecenter/db/application.py", line 25, in <module> from softwarecenter.backend.channel import is_channel_available File "/usr/share/software-center/softwarecenter/backend/channel.py", line 25, in <module> from softwarecenter.distro import get_distro File "/usr/share/software-center/softwarecenter/distro/__init__.py", line 165, in <module> distro_instance=_get_distro() File "/usr/share/software-center/softwarecenter/distro/__init__.py", line 148, in _get_distro module = __import__(distro_id, globals(), locals(), [], -1) ImportError: No module named LinuxMint Setting up software-properties-common (0.81.13.1) ... Setting up software-properties-gtk (0.81.13.1) ... $ Is there a way to fix this problem without having to reinstall Ubuntu 11.10?? thanks in advance tinuz

    Read the article

  • How to remove the Mint stuff from my system after installing MATE desktop using MINT repository

    - by tinuz
    I installed the MATE desktop using this manual http://www.unixmen.com/linux-tutorials/linux-distributions/linux-distributions4-ubuntu/1975-install-linuxmint12-extensions-mate-a-mgse-in-ubuntu-1110- but now i can't open my Ubuntu Software Center and can't open the settings from the update manager. I removed mate desktop but it doesn't fix the problem, i also reinstalled the software center, software-properties-gtk and software-properties-common using: sudo apt-get update; sudo apt-get --purge --reinstall install software-center software-properties-common software-properties-gtk. But when using this line i get the following error: Reading package lists... Done Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 3 reinstalled, 0 to remove and 0 not upgraded. Need to get 0 B/735 kB of archives. After this operation, 0 B of additional disk space will be used. (Reading database ... 304824 files and directories currently installed.) Preparing to replace software-center 5.0.2 (using .../software-center_5.0.2_all.deb) ... Unpacking replacement software-center ... Preparing to replace software-properties-common 0.81.13.1 (using .../software-properties-common_0.81.13.1_all.deb) ... Unpacking replacement software-properties-common ... Preparing to replace software-properties-gtk 0.81.13.1 (using .../software-properties-gtk_0.81.13.1_all.deb) ... Unpacking replacement software-properties-gtk ... Processing triggers for desktop-file-utils ... Processing triggers for gnome-menus ... Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for hicolor-icon-theme ... Processing triggers for man-db ... Processing triggers for shared-mime-info ... Unknown media type in type 'all/all' Unknown media type in type 'all/allfiles' Unknown media type in type 'uri/mms' Unknown media type in type 'uri/mmst' Unknown media type in type 'uri/mmsu' Unknown media type in type 'uri/pnm' Unknown media type in type 'uri/rtspt' Unknown media type in type 'uri/rtspu' Unknown media type in type 'interface/x-winamp-skin' Setting up software-center (5.0.2) ... Traceback (most recent call last): File "/usr/sbin/update-software-center", line 38, in <module> from softwarecenter.db.update import rebuild_database File "/usr/share/software-center/softwarecenter/db/update.py", line 59, in <module> from softwarecenter.db.database import parse_axi_values_file File "/usr/share/software-center/softwarecenter/db/database.py", line 26, in <module> from softwarecenter.db.application import Application File "/usr/share/software-center/softwarecenter/db/application.py", line 25, in <module> from softwarecenter.backend.channel import is_channel_available File "/usr/share/software-center/softwarecenter/backend/channel.py", line 25, in <module> from softwarecenter.distro import get_distro File "/usr/share/software-center/softwarecenter/distro/__init__.py", line 165, in <module> distro_instance=_get_distro() File "/usr/share/software-center/softwarecenter/distro/__init__.py", line 148, in _get_distro module = __import__(distro_id, globals(), locals(), [], -1) ImportError: No module named LinuxMint Setting up software-properties-common (0.81.13.1) ... Setting up software-properties-gtk (0.81.13.1) ... $ Is there a way to fix this problem without having to reinstall Ubuntu 11.10?? thanks in advance tinuz

    Read the article

  • Another sound not working post

    - by Thomas Smart
    Tried all the other "sound not working" posts i think, lost count. purge/reinstall alsa and pulse, reboot, add user to audio group, various lines in the alsa config file such as "options snd-hda-intel model=" then tried different options like generic, auto, basic, default, etc. tried pulseaudio -k && sudo alsa force-reload a few times, with and without rebooting. Hardware: 16gb ram, core I7-4790, Intel Haswell mboard with onboard sound and graphics Multimedia: Audio Adapter: HDA-Intel-HDA Intel HDMI OS: Ubuntu server 14.04 with ubuntu-desktop installed. GUI sound settings lists only the dummy sound card alsamixer -c 0 ¦ Card: HDA Intel HDMI F1: Help ¦ ¦ Chip: Intel Haswell HDMI F2: System information ¦ ¦ View: F3:[Playback] F4: Capture F5: All F6: Select sound card ¦ ¦ Item: S/PDIF ¦ ¦ +--+ ¦ ¦ ¦OO¦ ¦ ¦ +--+ ¦ ¦ < S/PDIF > ¦ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: HDMI [HDA Intel HDMI], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 aplay -L default Playback/recording through the PulseAudio sound server null Discard all samples (playback) or generate zero samples (capture) pulse PulseAudio Sound Server hdmi:CARD=HDMI,DEV=0 HDA Intel HDMI, HDMI 0 HDMI Audio Output dmix:CARD=HDMI,DEV=3 HDA Intel HDMI, HDMI 0 Direct sample mixing device dsnoop:CARD=HDMI,DEV=3 HDA Intel HDMI, HDMI 0 Direct sample snooping device hw:CARD=HDMI,DEV=3 HDA Intel HDMI, HDMI 0 Direct hardware device without any conversions plughw:CARD=HDMI,DEV=3 HDA Intel HDMI, HDMI 0 Hardware device with all software conversions cat /proc/asound/cards 0 [HDMI ]: HDA-Intel - HDA Intel HDMI HDA Intel HDMI at 0xf7d14000 irq 46 cat /proc/asound/devices 1: : sequencer 2: [ 0- 3]: digital audio playback 3: [ 0- 0]: hardware dependent 4: [ 0] : control 33: : timer mplayer -ao alsa:device=hdmi /usr/share/sounds/ubuntu/stereo/system-ready.ogg MPlayer 1.1-4.8 (C) 2000-2012 MPlayer Team mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing /usr/share/sounds/ubuntu/stereo/system-ready.ogg. libavformat version 54.20.4 (external) Mismatching header version 54.20.3 libavformat file format detected. [lavf] stream 0: audio (vorbis), -aid 0 Load subtitles in /usr/share/sounds/ubuntu/stereo/ ========================================================================== Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders libavcodec version 54.35.0 (external) AUDIO: 44100 Hz, 1 ch, floatle, 80.0 kbit/5.67% (ratio: 10000->176400) Selected audio codec: [ffvorbis] afm: ffmpeg (FFmpeg Vorbis) ========================================================================== [AO_ALSA] alsa-lib: confmisc.c:768:(parse_card) cannot find card '1' [AO_ALSA] alsa-lib: conf.c:4248:(_snd_config_evaluate) function snd_func_card_driver returned error: No such file or directory [AO_ALSA] alsa-lib: confmisc.c:392:(snd_func_concat) error evaluating strings [AO_ALSA] alsa-lib: conf.c:4248:(_snd_config_evaluate) function snd_func_concat returned error: No such file or directory [AO_ALSA] alsa-lib: confmisc.c:1251:(snd_func_refer) error evaluating name [AO_ALSA] alsa-lib: conf.c:4248:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory [AO_ALSA] alsa-lib: conf.c:4727:(snd_config_expand) Evaluate error: No such file or directory [AO_ALSA] alsa-lib: pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM hdmi [AO_ALSA] Playback open error: No such file or directory Failed to initialize audio driver 'alsa:device=hdmi' Could not open/initialize audio device -> no sound. Audio: no sound Video: no video Exiting... (End of file) mplayer -ao alsa:device=hw=0.3 /usr/share/sounds/ubuntu/stereo/system-ready.ogg MPlayer 1.1-4.8 (C) 2000-2012 MPlayer Team mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing /usr/share/sounds/ubuntu/stereo/system-ready.ogg. libavformat version 54.20.4 (external) Mismatching header version 54.20.3 libavformat file format detected. [lavf] stream 0: audio (vorbis), -aid 0 Load subtitles in /usr/share/sounds/ubuntu/stereo/ ========================================================================== Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders libavcodec version 54.35.0 (external) AUDIO: 44100 Hz, 1 ch, floatle, 80.0 kbit/5.67% (ratio: 10000->176400) Selected audio codec: [ffvorbis] afm: ffmpeg (FFmpeg Vorbis) ========================================================================== [AO_ALSA] Format floatle is not supported by hardware, trying default. AO: [alsa] 44100Hz 2ch s16le (2 bytes per sample) Video: no video Starting playback... A: 0.4 (00.4) of 0.8 (00.7) 0.1% Exiting... (End of file) Thank you for your time and help :)

    Read the article

  • Why is my machine unable to mount my SMB drives ("CIFS VFS: Error connecting to socket. Aborting operation", return code -115)?

    - by downbeat
    I have a machine running Precise (12.04 x64), and I cannot mount my SMB drives (I have 3, we'll call them public, private and download). It used to work (a week or two ago) and I didn't touch fstab! The machine hosting the shares is a commercial NAS, and I'm not seeing anything that would indicate it's an issue with the NAS. I have an older machine which I updated to Precise at the same time (both fresh installed, not dist-upgrade), so should have a very similar configuration. It is not having any problems. I am not having problems on windows machines/partitions either, only one of my Precise machines. The two machines are using identical entries in fstab and identical /etc/samba/smb.conf files. I don't think I've ever changed smb.conf (has never mattered before). My fstab entries all basically look like this: //10.1.1.111/public /media/public cifs credentials=/home/downbeat/.credentials,iocharset=utf8,uid=downbeat,gid=downbeat,file_mode=0644,dir_mode=0755 0 0 Here's the dmesg output on boot: [ 51.162198] CIFS VFS: Error connecting to socket. Aborting operation [ 51.162369] CIFS VFS: cifs_mount failed w/return code = -115 [ 51.194106] CIFS VFS: Error connecting to socket. Aborting operation [ 51.194250] CIFS VFS: cifs_mount failed w/return code = -115 [ 51.198120] CIFS VFS: Error connecting to socket. Aborting operation [ 51.198243] CIFS VFS: cifs_mount failed w/return code = -115 There are no other errors I see in the dmesg output. Originally when I ran 'testparm -s', the output contained these lines ERROR: lock directory /var/run/samba does not exist ERROR: pid directory /var/run/samba does not exist Here's the samba related programs I have installed: $ dpkg --list|grep -i samba ii libpam-winbind 2:3.6.3-2ubuntu2.3 Samba nameservice and authentication integration plugins ii libwbclient0 2:3.6.3-2ubuntu2.3 Samba winbind client library ii nautilus-share 0.7.3-1ubuntu2 Nautilus extension to share folder using Samba ii python-smbc 1.0.13-0ubuntu1 Python bindings for Samba clients (libsmbclient) ii samba-common 2:3.6.3-2ubuntu2.3 common files used by both the Samba server and client ii samba-common-bin 2:3.6.3-2ubuntu2.3 common files used by both the Samba server and client ii winbind 2:3.6.3-2ubuntu2.3 Samba nameservice integration server $ dpkg --list|grep -i smb ii dmidecode 2.11-4 SMBIOS/DMI table decoder ii libsmbclient 2:3.6.3-2ubuntu2.3 shared library for communication with SMB/CIFS servers ii python-smbc 1.0.13-0ubuntu1 Python bindings for Samba clients (libsmbclient) ii smbclient 2:3.6.3-2ubuntu2.3 command-line SMB/CIFS clients for Unix ii smbfs 2:5.1-1ubuntu1 Common Internet File System utilities - compatibility package $ dpkg --list|grep -i cifs ii cifs-utils 2:5.1-1ubuntu1 Common Internet File System utilities ii libsmbclient 2:3.6.3-2ubuntu2.3 shared library for communication with SMB/CIFS servers ii smbclient 2:3.6.3-2ubuntu2.3 command-line SMB/CIFS clients for Unix I originally noticed that my other machine had "libpam-winbind" and "nautilus-share" installed and the machine with the issue did not. Installing those two packages solved my errors with 'testparm -s', but did not fix my issue. Finally, I tried to purge and reinstall these packages smbclient smbfs cifs-utils samba-common samba-common-bin Still no luck. Again, it used to work; now it doesn't. Very similarly configured machine works (but some packages are out of date on the working machine). The NAS has only one interface/IP address, nmblookup works to find it's IP from it's hostname (from the machine with the issue) and it responds to a ping. Please any help would be great. I've been searching on AskUbuntu, SuperUser, ubuntuforums and plain old search engines for a week now and it's driving me crazy!

    Read the article

  • Closer look at the SOA 12c Feature: Oracle Managed File Transfer

    - by Tshepo Madigage-Oracle
    The rapid growth of cloud-based applications in the enterprise, combined with organizations' desire to integrate applications with mobile technologies, is dramatically increasing application integration complexity. To meet this challenge, Oracle introduced Oracle SOA Suite 12c, the latest version of the industry's most complete and unified application integration and SOA solution. With simplified cloud, mobile, on-premises, and Internet of Things (IoT) integration capabilities, all within a single platform, Oracle SOA Suite 12c helps organizations speed time to integration, improve productivity, and lower TCO. To extend its B2B solution capabilities with Oracle SOA Suite 12c, Oracle unveiled Oracle Managed File Transfer, an integrated solution that enables organizations to virtually eliminate file transfer complexities. This allows customers to load data securely into Oracle Cloud applications as well as third-party cloud or partner applications. Oracle Managed File Transfer (Oracle MFT) enables secure file exchange and management with internal departments and external partners. It protects against inadvertent access to unsecured files at every step in the end-to-end transfer of files. It is easy to use especially for non technical staff so you can leverage more resources to manage the transfer of files. The extensive reporting capabilities allow you to get quick status of a file transfer and resubmit it as required. You can protect data in your DMZ by using the SSH/FTP reverse proxy. Oracle Managed File Transfer can help integrate applications by transferring files between them in complex use case patterns. Standalone: Transferring files on its own using embedded FTP and sFTP servers and the file systems to which it has access. SOA Integration: a SOA application can be the source or target of a transfer. A SOA application can also be the common endpoint for the target of one transfer and the source of another. B2B Integration: B2B application can be the source or target of a transfer. A B2B application can also be the common endpoint for the target of one transfer and the source of another. Healthcare Integration:  Healthcare application can be the source or target of a transfer. A Healthcare application can also be the common endpoint for the target of one transfer and the source of another. Oracle Service Bus (OSB) integration: OMT can integrate with Oracle Service Bus web service interfaces. OSB interface can be the source or target of a transfer. An Oracle Service Bus interface can also be the common endpoint for the target of one transfer and the source of another. Hybrid Integration: can be one participant in a web of data transfers that includes multiple application types. Oracle Managed File Transfers has four user roles: file handlers, designers, monitors, and administrators. File Handlers: - Copy files to file transfer staging areas, which are called sources. - Retrieve files from file transfer destinations, which are called targets. Designers: - Create, read, update and delete file transfer sources. - Create, read, update and delete file transfer targets. - Create, read, update and delete transfers, which link sources and targets in complete file delivery flows. - Deploy and test transfers. Monitors: - Use the Dashboard and reports to ensure that transfer instances are successful. - Pause and resume lengthy transfers. - Troubleshoot errors and resubmit transfers. - View artifact deployment details and history. - View artifact dependence relationships. - Enable and disable sources, targets, and transfers. - Undeploy sources, targets, and transfers. - Start and stop embedded FTP and sFTP servers. Administrators: - All file handler tasks - All designer tasks - All monitor tasks - Add other users and determine their roles - Configure user directory permissions - Configure the Oracle Managed File Transfer server - Configure embedded FTP and sFTP servers, including security - Configure B2B and Healthcare domains - Back up and restore the Oracle Managed File Transfer configuration - Purge transferred files and instance data - Archive and restore instance data and payloads - Import and export metadata You will find all the related information about SOA 12.1.3. Oracle Manages File Transfer OMT in the documentation: Using Oracle Manages File Transfer Resources and links: Oracle Unveils Oracle SOA Suite 12c Oracle Managed Files Transfer Oracle Managed Files Transfer SOA 12c White Paper For further enquiries don't hesitate to contact us at [email protected] and join our Partner Webcast on Oracle SOA Suite 12c

    Read the article

  • 12.04 installation started to black screen during boot today

    - by Cedric
    NOTE: Most of this question is now irrelevant. UPDATE 3 summarizes the problem as it stands. I've been running 12.04 on my Lenovo laptop for one month now (updated from 11.04), and I have not had any significant problem until today. This morning, when I boot, I pass the Grub screen, then I get to the purple loading screen with dots as usual, then for some reason I got to the terminal login, with no GUI. startx gives me a black screen. Ctrl+F7-F8 didn't help either. It's similar to: After the update today no graphical interface anymore - 12.04 I followed the instructions at the end, to flush the ATI drivers (which I had installed), and fall back to the community drivers. That made me lose the login! Now I just get a black screen after the Ubuntu loading screen. I can still access the console through recovery, and I've gotten into VESA mode once or twice (not reproducible, for some reason). I've tried various permutations of xorg.conf, without success. Xorg -configure fails for now, though I might be able to get it to work. apt-get update/upgrade doesn't improve anything either. However, both Windows and the 12.04 Live CD still work beautifully, and I know that all my data is still there. Is there any way that I could somehow take the configuration from the Live CD and roll with it? I know that I could reinstall, but that sucks, frankly, especially given that there's no straight-forward way of keeping the home (which, incidentally, is unaccessible from the Live CD) Thank you. Update: it seems that the fglrx drivers are still active, even after I've --purged them. From Xorg.0.log: [ 18.235] (WW) fglrx(0): *********************************************************** [ 18.235] (WW) fglrx(0): * DRI initialization failed * [ 18.235] (WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible * [ 18.235] (WW) fglrx(0): * 2D and 3D acceleration disabled * [ 18.235] (WW) fglrx(0): *********************************************************** [ 18.235] Fatal server error: [ 18.235] AddScreen/ScreenInit failed for driver 0 There's also a mention of the "fbdev" module. What is it? PARTIALLY SOLVED: I've undone the damage from the fglrx purge. I'm still mystified as to why uninstalling the packages didn't kill fglrx entirely, but I've now recovered the prompt. The solution to the DRI initialization error was to add radeon.modeset=0 to the GRUB boot options. So I'm back to being dropped to a prompt without any GUI. startx gives me a bunch of messages, though no obvious errors. I have little reason to suspect the video drivers, as they worked fine before today. There is no apparent error message in any of the log files. UPDATE: When I startx, I get an error, Plymounth command failed mountall: Disconnected from Plymouth This is all over the Internet, but I have not found anything that works for me yet. UPDATE 3: If I press ESC during boot, the splash screen (Plymouth!) disappears, and I no longer have any error from Plymouth. The last error message is: Stopping mount filesystems on boot I can then Ctrl+Alt+F1 to get the TTY1, but startx still does not work. Sadly, the Internet knows nothing about this error message, and neither do I. Help!

    Read the article

  • Exposed: Fake Social Marketing

    - by Mike Stiles
    Brands and marketers who want to build their social popularity on a foundation of lies are starting to face more of an uphill climb. Fake social is starting to get exposed, and there are a lot of emperors getting caught without any clothes. Facebook is getting ready to do a purge of “Likes” on Pages that were a result of bots, fake accounts, and even real users who were duped or accidentally Liked a Page. Most of those accidental Likes occur on mobile, where it’s easy for large fingers to hit the wrong space. Depending on the degree to which your Page has been the subject of such activity, you may see your number of Likes go down. But don’t sweat it, that’s a good thing. The social world has turned the corner and assessed the value of a Like. And the verdict is that a Like is valuable as an opportunity to build a real relationship with a real customer. Its value pales immensely compared to a user who’s actually engaged with the brand. Those fake Likes aren’t doing you any good. Huge numbers may once have impressed, but it’s not fooling anybody anymore. Facebook’s selling point to marketers is the ability to use a brand’s fans to reach friends of those fans. Consequently, there has to be validity and legitimacy to a fan count. Speaking of mobile, Trademob recently reported 40% of clicks are essentially worthless, because 22% of them are accidental (again with the fat fingers), while 18% are trickery. Publishers will but huge banner ads next to tiny app buttons to increase the odds of an accident. Others even hide a banner behind another to score 2 clicks instead of 1. Pontiflex and Harris Interactive last year found 47% of users were more likely to click a mobile ad accidentally than deliberately. Beyond that, hijacked devices are out there manipulating click data. But to what end for a marketer? What’s the value of a click on something a user never even saw? What’s the value of a seen but accidentally clicked ad if there’s no resulting transaction? Back to fake Likes, followers and views; they’re definitely for sale on numerous sites, none of which I’ll promote. $5 can get you 1,000 Twitter followers. You can even get followers targeted by interests. One site was set up by an unemployed accountant out of his house in England. He gets them from a wholesaler in Brooklyn, who gets them from a 19-year-old supplier in India. The unemployed accountant is making $10,000 a day. That means a lot of brands, celebrities and organizations are playing the fake social game, apparently not coming to grips with the slim value of the numbers they’re buying. But now, in addition to having paid good money for non-ROI numbers, there’s the embarrassment factor. At least a couple of sites have popped up allowing anyone to see just how many fake and inactive followers you have. Britain’s Fake Follower Check and StatusPeople are the two getting the most attention. Enter any Twitter handle and the results are there for all to see. Fake isn’t good, period. “Inactive” could be real followers, but if they’re real, they’re just watching, not engaging. If someone runs a check on your Twitter handle and turns up fake followers, does that mean you’re suspect or have purchased followers? No. Anyone can follow anyone, so most accounts will have some fakes. Even account results like Barack Obama’s (70% fake according to StatusPeople) and Lady Gaga’s (71% fake) don’t mean these people knew about all those fakes or initiated them. Regardless, brands should realize they’re now being watched, and users are judging the legitimacy of their social channels. Use one of any number of tools available to assess and clean out fake Likes and followers so that your numbers are as genuine as possible. And obviously, skip the “buying popularity” route of social marketing strategy. It doesn’t work and it gets you busted…a losing combination.

    Read the article

  • How does the Trash Can work, and where can I find official documentation, reference, or specification for it?

    - by MestreLion
    When trying to manage trash can from mounted NTFS volumes, I ended up reading FreeDesktop.org's reference on it. Poking around and doing some tests, I realized Ubuntu/Gnome does not follow the specs 100%. Here's why: For non-/ partitions, it always uses <driveroot>/.Trash-<uid>, It never used <driveroot>/.Trash/<uid>, even when i created it in advance. While this works, it's annoying: if I have 15 users, I end up with 15 /.Trash-xxx folders in my drive, while the other approach would still give a single folder (with 15 sub-folders). That "pollution" in my drives is very unpleasant. And specs say "If an $topdir/.Trash directory is absent, an $topdir/.Trash-$uid directory is to be used". Well, it IS present, so why does it never use it? root trash does not work, at least not out of the box. Open nautilus as root and click on trash; it gives an error. Try to delete any file, it says "it can't move to trash". Ok, I know this can be fixed by creating /root/.local/share. But specs says "A “home trash” directory SHOULD be automatically created for any new user. If this directory is needed for a trashing operation but does not exist, the implementation SHOULD automatically create it, without any warnings or delays.". Why the error then? Bug? Why must I change /etc/fstab entries for mounted volumes, adding options like uid and guid, if the volumes are already mounted as RW for everyone? These are just some examples of deviation from the standard. So, the question is: "If Ubuntu does not adhere 100% to the spec, HOW exactly does the trash work? WHERE can i find a technical reference for Ubuntu's implementation of the trash?" By the way: if Ubuntu does happen to follow specs, please tell me what I am doing wrong, especially regarding the /.Trash-<uid> vs /.Trash/<uid> issue. Thanks! EDIT: Some more info: If a given fs has no support for the sticky bit (VFAT, NTFS), it probably doesn't have for permissions either (at least VFAT surely doesn't). So what prevents one user from purging / restoring other users' ./Trash-xxx ? If one can read/write his own Trash, one can do the same for the whole drive, including other's trashes, correct? Or does Gnome have some kind of "extra" protection on ./Trash-xxx folders on VFAT/NTFS fs? If Linux can "emulate" file permissions on NTFS mounting by editing /fstab uid and gid options, can it also "emulate" the sticky bit? I would really prefer to use /.Trash/xxx format... For the root issue: for the / partition, I can use trash as root, and it goes to /root/.local/shate/Trash. But if I click on Nautilus "Trash" (as root), I get an error. Don't you? So files are correctly trashed, but I can't access it. All I can do is manually "purge" them (by deleting files on /root/.local/shate/Trash), but restoring would be very tricky (opening info files and manually moving, etc.). For non-/ partitions (or at least for VFAT/NTFS), I can not even use trash as root: it does not create a ./Trash-0 folder, it simply says "Cannot trash, want to permanently delete?" Why? About fstab: i use it for a permanent mount for my NTFS partitions. I have several, and if not "pre-mounted" they really clutter the desktop and/or Nautilus. I'd rather have it pre-mounted, integrated in my fs, in mounts like /data , /windows/xp , /windows/vista , and so on, and leave /media and its "mount/unmount" flexibility just for truly removable drives. So, if Ubuntu/Gnome truly follows the spec, is there any way to fix the root issues and to "emulate" the sticky bit for (at least) my fstab'ed NTFS fixed partitions?

    Read the article

  • How does Trash Can works? Where can i find official specification / documentation / reference about it?

    - by MestreLion
    When trying to manage trash can from mounted NTFS volumes, I ended up reading FreeDesktop.org's reference on it. Poking around and doing some tests, I realized Ubuntu/Gnome does not follow the specs 100%. Here's why: For non-/ partitions, it always use <driveroot>/.Trash-<uid>, It never used <driveroot>/.Trash/<uid>, even when i created it in advance. While this works, its annoying: if i have 15 users, i end up with 15 /.Trash-xxx folders in my drive, while the other approach would still give a single folder (with 15 sub-folders). That "pollution" in my drives is very unpleasant. And specs say "If an $topdir/.Trash directory is absent, an $topdir/.Trash-$uid directory is to be used". Well, it IS present, so why it never uses it? root trash does not work, at least not out of the box. Open nautilus as root and click on trash, it gives error. Try to delete any file, it says "it cant move to trash". Ok, i know this can be fixed by creating /root/.local/share. But specs says "A “home trash” directory SHOULD be automatically created for any new user. If this directory is needed for a trashing operation but does not exist, the implementation SHOULD automatically create it, without any warnings or delays.". Why error then? Bug? Why do i must change /etc/fstab entries for mounted volumes, adding options like uid and guid, if the volumes are already mounted as RW for everyone? These are just some examples of deviation from standard. So, the question is: "If Ubuntu does not adhere 100% to the spec, HOW exactly does the trash work? WHERE can i find technical reference about Ubuntu's implementation of the trash?" By the way: if Ubuntu does happen to follow specs, please tell me what am i doing wrong, specially regarding the /.Trash-<uid> vs /.Trash/<uid> issue. Thanks! EDIT: Some more info: If a given fs has no support for sticky bit (VFAT, NTFS), it probably dont have for permitions either (at least VFAT surely doesnt). So what prevents one user for purging / restoring other users ./Trash-xxx ? If one can read/write his own Trash, he can also do the same for the whole drive, including other's trashes, isnt it? Or does Gnome has any "extra" protection on ./Trash-xxx folders on VFAT/NTFS fs? If Linux can "emulate" file permitions on NTFS mounting by editing /fstab uid and gid options, can it also "emulate" the sticky bit? I would really want to use /.Trash/xxx format... For the root issue: for the / partition, i can trash as root, and it goes to /root/.local/shate/Trash. But if i click on Nautilus "Trash" (as root), i get an error. Dont you? So files are correctly trashed, but i cant access it. All i can do is manually "purge" them (by deleting files on /root/.local/shate/Trash), but restoring would be very tricky (opening info files and manually moving, etc) For non-/ partitions (or at least for VFAT/NTFS), I can not even trash as root: it does not create a ./Trash-0 folder, it simply says "Cannot trash, want to permantly delete?" Why? About fstab: i use it for a permanent mount for my NTFS partitions. I have several, and if not "pre-mounted" they really cluttter desktop and/or Nautilus. Id rather have it pre mounted, integrated in my fs, in mounts like /data , /windows/xp , /windows/vista , and so on, and leave /media and its "mount/unmount" flexibility just for truly removable drives Si, if Ubuntu/Gnome truly follow the spec, is there any way to fix the root issues and to "emulate" the sticky bit for (at least) my fstab'ed NTFS fixed partitions?

    Read the article

  • 11.10 desktop alerts (volume change and terminal bell) stopped working but all other audio still works

    - by FlabbergastedPickle
    All, My sound works just fine in 11.10 64-bit install on HP dm1-4050 Sandy Bridge notebook (e.g. audio works in Banshee, flash, games, browser, Thunderbird email notification, etc.), but the core desktop notifications (e.g. pressing a tab in a terminal where there is more than one option should trigger a terminal bell, or changing volume using volume keys should be accompanied with the supporting "quack" that the volume app makes) do not work. I've intentionally disabled login sound as explained here on ask ubuntu but even enabling it back makes no difference. These notifications did work before just fine and I am not sure when did the actually stop working but it must've been fairly recently. Only things I did were trying to install some ppa edge xorg drivers for my intel card (a separate issue) but also reverted them all with ppa-purge once I discovered they did not improve anything. Other thing I did was check volume settings with alsamixer and did alsactl store for the soundcard after I did some experimenting with volume settings for PCM (on my laptop PCM at 100% crackles so I had to lower it and make pulseaudio ignore its setting as per ask ubuntu's page). That said, neither of these should have any bearing on the said notifications since the volume is up and they clearly work everywhere else but the core desktop events. The system ready drum sound when Ubuntu boots and user reaches the login screen also does not work. The guest login behaves exactly same as mine. Audio works (including the login sound since I've not disabled it for the guest account), but no quacks when changing the volume or terminal bell sounds... I've tried copying ubuntu sounds to /usr/share/sounds/ as suggested on ask ubuntu and that did not work. I also tried using dconf-editor to check sound theme settings and tried both freedesktop (which is what it was set to) and ubuntu, as suggested on ask ubuntu. This did not work either. I tried purging the ~/.pulse folder and the /tmp/*pulse* entries, rebooting and restarting pulseaudio with -D flag. While audio came back on and behaved just fine in all aspects (e.g. one can adjust volume levels, play music, games, in-browser sound stuff, and other app alerts) except for the system ready drum sound (at the login screen), and any system event (terminal bell and volume change quack sound). It is interesting that the quack sound works inside system settings-sound when adjusting levels there, but it does not when volume is changed via top bar's volume settings... I do recall that at one point yesterday when I was restarting pulseaudio the quacks that accompany volume change did start working but I have no idea what caused that. This was also when I first realized those alerts were not working. After rebooting it was again gone. I did compile my own 3.0.14-rt31 kernel a little while ago as instructed on one of the wiki's for the 11.10 rt kernel. Everything works as before except for the said sound alerts. I am not sure if this began happening since I started using the rt kernel though and yesterday's momentary ability to hear those quacks while changing the volume make me believe that the kernel is not one responsible for this problem. One more thing I can think of is that I used alsoft-conf tool to configure buffering on the OpenAL (due to TA Spring's choppy audio) and changed in there default audio device to ALSA. I also tried reverting it to Pulseaudio as the only allowed output but the bottom part of the Backend tab always reverts to ALSA even when I select Pulseaudio. The pulseaudio does remain as the only active choice on top. This, however, once again does not make any sense in terms of preventing desktop audio alerts when everything else including OpenAL games plays sound just fine... So, there you have it, as verbose as I could make it :-). I tried all I could find on this issue and had no luck so far... Any ideas?

    Read the article

  • No Wireless Networks, BCM4313 [duplicate]

    - by TalonPlz
    This question already has an answer here: How to Install Broadcom Wireless Drivers (BCM43xx) 38 answers Just bought this little Asus 10 inch laptop that came with Ubuntu 12.04. Everything at my home was fine: Wireless identified and connected. As soon as I went to my girlfriend's house the trouble started. I couldn't connect to wireless (authentication... times out and asks for authentication) I started doing internet searching, tried a few solutions posted on line using terminal commands. No solutions. I decided to upgraded to 12.10-13.04 and that left me with a worse problem: I can no longer see ANY networks what so ever. Wireless card is ON, with out a doubt. Wired connection works. I have been fumbling with driver versions to no .avail, and have no idea which driver I am currently running I have a vague idea of what terminal lines to run: lshw: resources: irq:17 memory:f7d00000-f7dfffff *-network description: Wireless interface product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth2 version: 01 serial: dc:85:de:56:c4:ea width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=6.20.155.1 (r326264) latency=0 multicast=yes wireless=IEEE 802.11abg resources: irq:17 memory:f7d00000-f7d03fff iwconfig: eth1 no wireless extensions. eth2 IEEE 802.11abg ESSID:off/any Mode:Managed Access Point: Not-Associated Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off lo no wireless extensions. I am new and excited to start my Ubuntu and Linux life and this is only the first of my few hic cups i am sure! :) Thanks all UPDATE: Report from 2nd answer talon@Black1015E:~$ sudo apt-get remove --purge bcmwl-kernel-source [sudo] password for talon: Reading package lists... Done Building dependency tree Reading state information... Done Package 'bcmwl-kernel-source' is not installed, so not removed 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. talon@Black1015E:~$ wget http://us.archive.ubuntu.com/ubuntu/pool/restricted/b/bcmwl/bcmwl-kernel-source_5.100.82.112+bdcom-0ubuntu3_amd64.deb --2013-10-22 18:50:32-- http://us.archive.ubuntu.com/ubuntu/pool/restricted/b/bcmwl/bcmwl-kernel-source_5.100.82.112+bdcom-0ubuntu3_amd64.deb Resolving us.archive.ubuntu.com (us.archive.ubuntu.com)... 2001:67c:1562::15, 2001:67c:1562::13, 2001:67c:1562::14, ... Connecting to us.archive.ubuntu.com (us.archive.ubuntu.com)|2001:67c:1562::15|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 1181334 (1.1M) [application/x-debian-package] Saving to: ‘bcmwl-kernel-source_5.100.82.112+bdcom-0ubuntu3_amd64.deb’ 100%[======================================>] 1,181,334 3.37MB/s in 0.3s 2013-10-22 18:50:33 (3.37 MB/s) - ‘bcmwl-kernel-source_5.100.82.112+bdcom-0ubuntu3_amd64.deb’ saved [1181334/1181334] talon@Black1015E:~$ arvh No command 'arvh' found, did you mean: Command 'arch' from package 'coreutils' (main) arvh: command not found talon@Black1015E:~$ arch x86_64 talon@Black1015E:~$ sudo dpkg -i bcmwl*.deb Selecting previously unselected package bcmwl-kernel-source. (Reading database ... 171895 files and directories currently installed.) Unpacking bcmwl-kernel-source (from bcmwl-kernel-source_5.100.82.112+bdcom-0ubuntu3_amd64.deb) ... Setting up bcmwl-kernel-source (5.100.82.112+bdcom-0ubuntu3) ... Loading new bcmwl-5.100.82.112+bdcom DKMS files... First Installation: checking all kernels... Building only for 3.8.0-32-generic Building for architecture x86_64 Building initial module for 3.8.0-32-generic Done. wl: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/3.8.0-32-generic/updates/dkms/ depmod........ DKMS: install completed. Error: Module b43 is not currently loaded Error: Module b43legacy is not currently loaded Error: Module ssb is not currently loaded Error: Module bcm43xx is not currently loaded Error: Module brcm80211 is not currently loaded Error: Module brcmfmac is not currently loaded update-initramfs: deferring update (trigger activated) Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.8.0-32-generic rebooting now

    Read the article

  • Cannot get ATI Drivers installed

    - by bittoast67
    I am trying to install the Catalyst driver. The best I can get is a strange resolution problem and firefox acts all wonkt. The worst I have gotten is low graphics mode in which I just reinstall Ubuntu. I have a HP Pavilion Dv7 laptop. With Radeon 3200 HD. I plan to try again with a fresh install of Ubuntu 12.4.3 as I have heard its the most compatible. This is what I have done: I have tried just the easy way of going to synaptic and installing the drivers that way. the fglrx package (not the fglrx update). And if memory serves I think that boots me into low graphics mode. So, fresh install of Ubuntu and tried again. I have done everything a couple times from this site (http://wiki.cchtml.com/index.php/Ubuntu_Precise_Installation_Guide) following every instruction to a T. That gets me something, such as a lowered fan speed and a much cooler computer, but I also lose most of my resolution. And displays says its the best resolution I can get. I also have a very screwy firefox. Using this method I can see AMD Catalyst Control Center in my dash (two of them really one administrator and one not) but when I try to open it it says no amd driver detected. So again, ubuntu reinstall. I have tried the GUI method from the Legacy driver I got from AMD's site. It runs through smoothly and at the very end after I exit the installer it gives me an error. I have also tried various other methods using terminal, as well as various different drivers (the one from the amd's site and the one suggested in the above link for my graphics card) both to no avail. When I try the method in the link on number 2, and I get the super low res and screwy fire fox. I type in, fglrxinfo ,and get a badrequest error. I have yet to type in fglrxinfo and get anything like what I am supposed to. UPDATE: I am now currently reinstalling Ubuntu 12.4. I tried the above mentioned link - thank you very much!- just to see on the previously failed driver attempt by following the purge commands. And to no avail when typing fglrxinfo I still get the badrequest thing. I will update again after a try with a true fresh install. Thanks again!! UPDATE: Alright everyone. Still no go. I have done everything word per word in the provided tutorial. I have rebooted my computer again to a fucked up resolution and this is what I get when typing fglrxinfo: $ fglrxinfo X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 153 (GLX) Minor opcode of failed request: 19 (X_GLXQueryServerString) Serial number of failed request: 12 Current serial number in output stream: 12 I would like to add that when installing this file: fglrx_8.970-0ubuntu1_amd64.deb I got this: Building initial module for 3.8.0-29-generic Error! Bad return status for module build on kernel: 3.8.0-29-generic (x86_64) Consult /var/lib/dkms/fglrx/8.970/build/make.log for more information. update-initramfs: deferring update (trigger activated) Processing triggers for ureadahead ... Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.8.0-29-generic Processing triggers for libc-bin ... ldconfig deferred processing now taking place Any ideas? Anyone? I cant for the life of me figure out what I am doing wrong.

    Read the article

  • How to reclaim storage for deleted LOBs

    - by Jim Hudson
    I have a LOB tablespace. Currently holding 9GB out of 12GB available. And, as far as I can tell, deleting records doesn't reclaim any storage in the tablespace. I'm getting worried about handling further processing. This is Oracle 11.1 and the data are in a CLOB and a BLOB column in the same table. The LOB Index segments (SYS_IL...) are small, all the storage is in the data segments (SYS_LOB...) We'e tried purge and coalesce and didn't get anywhere -- same number of bytes in user_extents. "Alter table xxx move" will work, but we'd need to have someplace to move it to that has enough space for the revised data. We'd also need to do that off hours and rebuild the indexes, of course, but that's easy enough. Copying out the good data and doing a truncate, then copying it back, will also work. But that's pretty much just what the "alter table" command does. Am I missing some easy ways to shrink things down and get the storage back? Or is "alter table xxx move" the best approach? Or is this a non-issue and Oracle will grab back the space from the deleted lob rows when it needs it?

    Read the article

  • Incremental Timer

    - by Donal Rafferty
    I'm currently using a Timer and TimerTask to perform some work every 30 seconds. My problem is that after each time I do this work I want to increment the interval time of the Timer. So for example it starts off with 30 seconds between the timer firing but I want to add 10 seconds to the interval then so that the next time the Timer takes 40 seconds before it fires. Here is my current code: public void StartScanning() { scanTask = new TimerTask() { public void run() { handler.post(new Runnable() { public void run() { wifiManager.startScan(); scanCount++; if(SCAN_INTERVAL_TIME <= SCAN_MAX_INTERVAL){ SCAN_INTERVAL_TIME = SCAN_INTERVAL_TIME + SCAN_INCREASE_INTERVAL; t.schedule(scanTask, 0, SCAN_INTERVAL_TIME); } } }); }}; Log.d("SCAN_INTERVAL_TIME ** ", "SCAN_INTERVAL_TIME ** = " + SCAN_INTERVAL_TIME); t.schedule(scanTask, 0, SCAN_INTERVAL_TIME); } But the above gives the following error: 05-26 11:48:02.472: ERROR/AndroidRuntime(4210): java.lang.IllegalStateException: TimerTask is scheduled already Calling cancel or purge doesn't help. So I was wondering if anyone can help me find a solution? Is a timer even the right way to approach this?

    Read the article

  • mercurial: how to synchronize mq patches from a master repo as mq patches to a set of clone repos

    - by dim
    I have to run a dozen of different build tests on a code base maintained in a mercurial repository. I don't want to run serially these tests on same repository because they modify a set of common files and I want to run them in parallel on different machines. Also, after all tests are run I want to have access to latest test results from those test work areas. Currently I'm cloning the master repository a dozen of times and run in each clone one different test. Before each test execution I do a pull/update/purge preparation sequence in order to start the test on latest clean state. That's good for me. I'm also preparing new changes using mq extension that I would test on all clones as above before committing them. For testing some ready candidate mq patches I want somehow to deploy/synchronize them to be available in test clones and apply those ready for testing using some guard before running the test. Did anybody do this synchronization before? What's the most simple way to do it? Do I need to have versioned mq patches for that?

    Read the article

  • MySQL can't access root account or reset with mysqladmin

    - by glumptious
    So if I type mysql -u root I'm supposedly logged in, however upon trying to create or access a database I get this lovely error: ERROR 1044 (42000): Access denied for user ''@'localhost' to database 'test1'. I haven't the foggiest idea why after logging in as root it's trying access DB's as ''@'localhost' and it's driving me a bit crazy right now. Possibly related, when I try to set the root password I get the error mysqladmin: Can't turn off logging; error: 'Access denied; you need (at least one of) the SUPER privilege(s) for this operation'. I've tried removing mysql-server via running apt-get purge mysql-server and then reinstalling with no luck. This is running Ubuntu Server 12.10 64-bit and mysql is indeed running. --Edit-- I wonder if perhaps there is no root user. So I try to start MySQL with --skip-grant-tables and the create the root user but then I'm given this: ERROR 1290 (HY000): The MySQL server is running with the --skip-grant-tables option so it cannot execute this statement. Fun fun fun fun fun.

    Read the article

  • Algorithm detect repeating/similiar strings in a corpus of data -- say email subjects, in Python

    - by RizwanK
    I'm downloading a long list of my email subject lines , with the intent of finding email lists that I was a member of years ago, and would want to purge them from my Gmail account (which is getting pretty slow.) I'm specifically thinking of newsletters that often come from the same address, and repeat the product/service/group's name in the subject. I'm aware that I could search/sort by the common occurrence of items from a particular email address (and I intend to), but I'd like to correlate that data with repeating subject lines.... Now, many subject lines would fail a string match, but "Google Friends : Our latest news" "Google Friends : What we're doing today" are more similar to each other than a random subject line, as is: "Virgin Airlines has a great sale today" "Take a flight with Virgin Airlines" So -- how can I start to automagically extract trends/examples of strings that may be more similar. Approaches I've considered and discarded ('because there must be some better way'): Extracting all the possible substrings and ordering them by how often they show up, and manually selecting relevant ones Stripping off the first word or two and then count the occurrence of each sub string Comparing Levenshtein distance between entries Some sort of string similarity index ... Most of these were rejected for massive inefficiency or likelyhood of a vast amount of manual intervention required. I guess I need some sort of fuzzy string matching..? In the end, I can think of kludgy ways of doing this, but I'm looking for something more generic so I've added to my set of tools rather than special casing for this data set. After this, I'd be matching the occurring of particular subject strings with 'From' addresses - I'm not sure if there's a good way of building a data structure that represents how likely/not two messages are part of the 'same email list' or by filtering all my email subjects/from addresses into pools of likely 'related' emails and not -- but that's a problem to solve after this one. Any guidance would be appreciated.

    Read the article

< Previous Page | 10 11 12 13 14 15 16 17  | Next Page >