Search Results

Search found 1636 results on 66 pages for 'rc'.

Page 14/66 | < Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >

• FreeBSD 8.0 - Macbook: Trying to Connect to Wireless

  - by Koroviev

  What Happened A few days ago I installed FreeBSD 8from USB to my Macbook (Core Duo, 13"). The first thing I wanted to do was get my GUI back. I'm new to FreeBSD and it's my first time off of mac or windows, so I had some learning to do. I tried to a make clean install of xorg with ports but it returned many "No address record" errors. I realised I hadn't configured network settings and then the fun started. I ran ifconfig and it found 5 devices: msk0, ath0, fwe0, fwip0, lo0. * ath0 was identified as media: IEEE 802.11 Wireless Ethernet autoselect so it was clear which one I needed. From what I gathered, there are 3 files and two processes involved here: /boot/loader.conf /etc/wpa_supplicant.conf /etc/rc.conf /etc/rc.d/netif wpa_supplicant (which is a part of the former too) I'm certain it's a big simplification, so correct me if I'm wrong here. What I Tried I configured /boot/loader.conf with the few basic settings, and I'm most sure that this file is okay. The other 2 were more puzzling. I tried to make a network package in wpa_supplicant.conf. I found the ssid of the router, but the security wasn't so easy. The routers configuration on security is set to "Auto", with no explanation given. Other options are there, but Auto is selected. Another laptop uses WEP to connect (it's Vista, so I don't know how to get any more info than that), but I never configured it to do it. There's a string labled "wireless key" on the bottom of the router which I entered to set it up a new machine on the network (Windows and Macs, so it was simplified). I never had to choose a security type and only learned about them by installing FreeBSD. So perhaps WEP is what "Auto" means, but I can't find any other evidence. wpa_supplicant.conf seemed to never be correctly configured. I always got errors related to it and WPA_supplicant doesn't work. It gave me "Can't disable/enable WPA in the driver" errors and more once when I enabled -d -d. This was when I was trying some suspect configurations in rc.conf though. Usually it does nothing except hijack the shell and print "CTRL-SCAN-EVENT-RESULT" every 10 seconds. I learned how to clone the ath0 device to a wlandev interface (wlan0). ath0 is associated to it and their connection seems to go smoothly. But the wlan0's connection to the network is the problem. I couldn't create this with rc.conf, I do something wrong and get ifconfig: create: bad value errors whenever it's parsed. I did it via the shell instead. What Now? I scanned with wlan0 today: ifconfig wlan0 list scan It shows my router, even my neighbour's router. It was a relief to finally get some feedback. So wlan0 is UP and detects the router, but it is always status: no carrier. It can't associate with it and I can't figure out why. Running /etc/rc.d/netif start returns almost the same result as ifconfig would. It shows lo0 and wlan0, and sometimes ath0. I still not sure what lo0 is doing. So; how do I associate with it? We can assume it's WEP security based on how the other laptop is setup. I'll give every relevant output here. After boot, with a blank rc.conf this is what ifconfig returns: msk0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=11a<TXCSUM,VLAN_MTU,VLAN_HWTAGGING,TSO4> ether 00:17:f2:29:89:3b media: Ethernet autoselect ath0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 2290 ether 00:16:cb:bb:fe:65 media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) status: no carrier fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=8<VLAN_MTU> ether 02:17:f2:60:ad:7e ch 1 dma -1 fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 lladdr 0.17.f2.ff.fe.60.ad.7e.a.2.ff.fe.0.0.0.0 lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=3<RXCSUM,TXCSUM> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 I run: ifconfig wlan0 create wlandev ath0 It returns: wlan0: bpf attached wlan0: bpf attached wlan0: Ethernet address: xx:xx:xx:xx:xx:xx Ifconfig now returns: msk0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=11a<TXCSUM,VLAN_MTU,VLAN_HWTAGGING,TSO4> ether 00:17:f2:29:89:3b media: Ethernet autoselect ath0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 2290 ether 00:16:cb:bb:fe:65 media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) status: no carrier fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=8<VLAN_MTU> ether 02:17:f2:60:ad:7e ch 1 dma -1 fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 lladdr 0.17.f2.ff.fe.60.ad.7e.a.2.ff.fe.0.0.0.0 lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=3<RXCSUM,TXCSUM> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 wlan0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 ether 00:16:cb:bb:fe:65 media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) status: no carrier ssid "" channel 1 (2412 Mhz 11b) regdomain 106 indoor ecm authmode OPEN privacy OFF txpower 20 bmiss 7 scanvalid 60 bgscan bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 1 wme burst bintval 0 I run: ifconfig wlan0 up ifconfig wlan0 scan It finds my router and displays its details. I can feed it my routers details now, using: ifconfig wlan0 key value key value ... They show up in wlan0 when I run ifconfig, but it still doesn't associate. What details should I feed it, what exactly is needed? What, if anything, should I have in /etc/wpa_supplicant.conf (and if that psk is needed, is it most likely the string I mentioned above)? If I define the ssid in wpa_supplicant.conf, should I still feed it to wlan0? What process should I then use to associate it? 5 .How should I add these things to rc.conf so it will automatically do this at boot? A huge thank you in advance for any help you can give, I've spent hours crawling about the shell and I've learned quite a bit from it (I finally got the hang of vi too, from all that editing). But the sooner this is fixed, the better. *P.S. I was, and still am, wondering where the extra three devices come from (the wireless and wired were all I expected to find). lo0 is up at each boot and /etc/rc.d/netif, I have no idea what it is and can't find it in dmesg. Resources: /etc/loader.conf: Code: if_ath_load="YES" wlan_wep_load="YES" wlan_ccmp_load="YES" wlan_tkip_load="YES" /etc/wpa_supplicant.conf (I emptied it of everything unnecessary, because I was just causing errors) network={ ssid="BTVOYAGER2110-1C" } /etc/rc.conf has no network settings, I commented them out because of errors. There was my attempt to clone ath0 and feed it info, but I did if via the shell instead. I've included the output of dmesg as an attachment, in case it's useful. I'd include the boot text (which appears before login) but I don't know how to catch it into a text file. If it's needed and somebody tells me how, I will (actually, even if it's not needed, how can I view it to read?).

  Read the article

• How to boot RHEL with no bash?

  - by nmelmun

  How can I boot a RHEL VM if I deleted /bin/bash? When trying to boot, I now get the following error: "INIT: Cannot execute "/etc/rc/d/rc.sysinit" The next thing I tried was to modify the kernel boot parameters by adding init=/bin/ksh at the end of the line, which gave me a functional shell. After this, in order to get write permissions, I remounted the root partition with: mount -o remount,rw / Then I tried to boot using ksh as the shell by tricking the system into thinking it's bash: ln -s /bin/ksh /bin/bash Then restarted the system normally. Unfortunately this didnt work since ksh is not compatible and /etc/rc.d/rc.sysinit uses several bash-specific tricks. Does anyone else have a suggestion on how I could get the system to boot normally without reinstalling bash?

  Read the article

• check two conditions in two different columns in excel and count the matches

  - by user1727103

  I've trying to create a Error Log to help me analyse my mistakes. So for simplicity, lets assume I have two columns "Type of Question" - with values SC,RC,CR and another column that indicates whether I got this question "right/wrong".Let's assume this is my table: Question No. | Right/Wrong | Question Type | Right | SC | Right | RC | Wrong | SC | Wrong | CR | Right | RC (Pardon my formatting skills). And I want an output table like this Type of Question | Right | Wrong | Total SC | 1 | 1 | 2 RC | 2 | 0 | 2 CR | 0 | 1 | 1 So basically what I want to do is check Column3 for SC using =COUNTIF(C1:C5,"SC"), and return the total number of SC questions, and then outta the SC , I need to find out which are Right.If I know the right and the total I can get the wrong. I have never written a macro so a formula based answer would suffice.

  Read the article

• can't install anything anymore with apt-get

  - by Aymane Shuichi

  Welcome this is the log I have when trying to install anything (php5-fpm after removing it) apt-get install php5-fpm Reading package lists... Done Building dependency tree Reading state information... Done php5-fpm is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? y Setting up php5-fpm (5.4.4-14+deb7u10) ... insserv: warning: script 'S55IptabLes' missing LSB tags and overrides insserv: warning: script 'S55IptabLex' missing LSB tags and overrides insserv: There is a loop between service IptabLes and mountnfs if started insserv: loop involving service mountnfs at depth 8 insserv: loop involving service networking at depth 7 insserv: loop involving service mountnfs-bootclean at depth 10 insserv: There is a loop between service rc.local and mountall if started insserv: loop involving service mountall at depth 6 insserv: loop involving service checkfs at depth 5 insserv: loop involving service kbd at depth 11 insserv: There is a loop between service rc.local and mountall-bootclean if started insserv: loop involving service mountall-bootclean at depth 7 insserv: loop involving service urandom at depth 9 insserv: There is a loop between service IptabLes and mountdevsubfs if started insserv: loop involving service mountdevsubfs at depth 2 insserv: loop involving service udev at depth 1 insserv: There is a loop at service rc.local if started insserv: There is a loop at service IptabLes if started insserv: Starting IptabLes depends on rc.local and therefore on system facility `$all' which can not be true! (x99 times repeated ) insserv: Max recursions depth 99 reached insserv: loop involving service postfix at depth 2 insserv: There is a loop between service IptabLes and udev if started insserv: loop involving service mountkernfs at depth 1 insserv: loop involving service IptabLes at depth 1 Now here is the error i get insserv: exiting now without changing boot order! update-rc.d: error: insserv rejected the script header dpkg: error processing php5-fpm (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: php5-fpm E: Sub-process /usr/bin/dpkg returned an error code (1) The biggest operation I held before this was updating nginx from 1.2 to 1.6 and it was thanks to this site : here is the link : How to upgrade nginx from 1.2 to 1.6 on debian 7 Please help !

  Read the article

• Say`vimrc`or `screenrc`, what does the `rc` mean?

  - by Cheng

  :) What does the rc mean?

  Read the article

• How the JOptionPane works

  - by DevAno1

  How can I control what happens with window after clicking JOPtionPane buttons ? I'm trying to implement simple file chooser. In my frame I have 3 buttons (OK, Cancel, Browse). Browse button opens file search window, and after picking files should return to main frame. Clicking OK will open a frame with the content of the file. Now porblem looks this way. With the code below, I can choose file but directly after that a new frame is created, and my frame with buttons dissapears : import java.io.File; import java.io.BufferedReader; import java.io.FileReader; import java.io.IOException; import java.awt.*; import javax.swing.*; import java.io.*; public class Main { public static void main(String args[]) { javax.swing.SwingUtilities.invokeLater(new Runnable() { public void run() { show("Window"); } }); } public static void show(String frame_name){ JFrame frame = new JFrame(frame_name); frame.setPreferredSize(new Dimension(450, 300)); frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); JPanel top = new JPanel(); top.setLayout(new BoxLayout(top, BoxLayout.Y_AXIS)); JFileChooser fc = new JFileChooser(new File(".")); JPanel creator = new JPanel(); creator.setLayout(new BoxLayout(creator, BoxLayout.Y_AXIS)); creator.add(top); String[] buttons = {"OK", "Cancel", "Browse"}; int rc = JOptionPane.showOptionDialog( null, creator, frame_name, JOptionPane.DEFAULT_OPTION, JOptionPane.PLAIN_MESSAGE, null, buttons, buttons[0] ); String approveButt = ""; switch(rc){ case 0: break; case 1: break; case 2: approveButt = buttons[rc]; int retVal = fc.showDialog(null, approveButt); if (retVal == JFileChooser.APPROVE_OPTION) System.out.println(approveButt + " " + fc.getSelectedFile()); break; } frame.pack(); frame.setVisible(true); } } With the second code I can return to my menu, but in no way I am able to pop this new frame, which appeared with first code. How to control this ? What am I missing ? public class Main { public static void main(String args[]) { javax.swing.SwingUtilities.invokeLater(new Runnable() { public void run() { show("Window"); } }); } public static void show(String frame_name){ JFrame frame = new JFrame(frame_name); frame.setPreferredSize(new Dimension(450, 300)); frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); JPanel top = new JPanel(); top.setLayout(new BoxLayout(top, BoxLayout.Y_AXIS)); JFileChooser fc = new JFileChooser(new File(".")); JPanel creator = new JPanel(); creator.setLayout(new BoxLayout(creator, BoxLayout.Y_AXIS)); creator.add(top); String[] buttons = {"OK", "Cancel", "Browse"}; String approveButt = ""; Plane m = null; int rc = -1; while (rc != 0) { rc = JOptionPane.showOptionDialog( null, creator, frame_name, JOptionPane.DEFAULT_OPTION, JOptionPane.PLAIN_MESSAGE, null, buttons, buttons[0] ); switch (rc) { case 0: m = new Plane(); case 1: System.exit(0); case 2: approveButt = buttons[rc]; int retVal = fc.showDialog(null, approveButt); if (retVal == JFileChooser.APPROVE_OPTION) System.out.println(approveButt + " " + fc.getSelectedFile()); break; default: break; } } addComponents(frame.getContentPane(), m); frame.pack(); frame.setVisible(true); } private static void addComponents(Container c, Plane e) { c.setLayout(new BoxLayout(c, BoxLayout.Y_AXIS)); c.add(e); } } class Plane extends JPanel { public Plane(){ } @Override public void paint(Graphics g){ g.setColor(Color.BLUE); g.fillRect(0, 0, 400, 250); } }

  Read the article

• Can't run init script on boot after another init script

  - by Colin McQueen

  I have three init scripts and the Broker init script runs fine, but when I try to run the Consumer init script and then the Data Collector init script, the only process that is running is the Broker. I added the symbolic links to the run levels using update-rc.d for each script and I also changed the number prefixes in the symbolic links to try and run the scripts in the proper order but that did not work. I am able to run the scripts from the terminal and they work fine but they need to all be started on boot. Any ideas as to why my other scripts are not running? Also inside my Consumer and Data Collector I am running: su user1 -c 'java -jar foo.jar' to start the services. Also the Consumer Java class sits and waits for a message from the queue, so the Java code does not stop until I specify the stop argument for the init script. The Broker has to start first, then the Consumer, then the Data Collector. Adding the symbolic links for the runlevels: sudo update-rc.d Broker defaults 10 90 sudo update-rc.d Consumer defaults 15 85 sudo update-rc.d DataCollector defaults 20 80

  Read the article

• dpkg error : old pre-removal script returned error exit status 102

  - by Siva Prasad Varma

  I am unable to install or remove a package on my Ubuntu 10.04 due to the following error. $ sudo apt-get autoremove Password: Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be REMOVED: busybox 0 upgraded, 0 newly installed, 1 to remove and 9 not upgraded. 1 not fully installed or removed. Need to get 0B/212kB of archives. After this operation, 627kB disk space will be freed. Do you want to continue [Y/n]? y Selecting previously deselected package nscd. (Reading database ... 235651 files and directories currently installed.) Preparing to replace nscd 2.11.1-0ubuntu7.8 (using .../nscd_2.11.1-0ubuntu7.8_amd64.deb) ... invoke-rc.d: not a symlink: /etc/rc2.d/S76nscd dpkg: warning: old pre-removal script returned error exit status 102 dpkg - trying script from the new package instead ... invoke-rc.d: not a symlink: /etc/rc2.d/S76nscd dpkg: error processing /var/cache/apt/archives/nscd_2.11.1-0ubuntu7.8_amd64.deb (--unpack): subprocess new pre-removal script returned error exit status 102 update-rc.d: warning: /etc/rc2.d/S76nscd is not a symbolic link invoke-rc.d: not a symlink: /etc/rc2.d/S76nscd dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 102 Errors were encountered while processing: /var/cache/apt/archives/nscd_2.11.1-0ubuntu7.8_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) What should I do to resolve this error. I have tried sudo dpkg --remove --force-remove-reinstreq nscd but it did not work.

  Read the article

• How to resolve - dpkg error : old pre-removal script returned error exit status 102

  - by Siva Prasad Varma

  I am unable to install or remove a package on my Ubuntu 10.04 due to the following error. $ sudo apt-get autoremove Password: Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be REMOVED: busybox 0 upgraded, 0 newly installed, 1 to remove and 9 not upgraded. 1 not fully installed or removed. Need to get 0B/212kB of archives. After this operation, 627kB disk space will be freed. Do you want to continue [Y/n]? y Selecting previously deselected package nscd. (Reading database ... 235651 files and directories currently installed.) Preparing to replace nscd 2.11.1-0ubuntu7.8 (using .../nscd_2.11.1-0ubuntu7.8_amd64.deb) ... invoke-rc.d: not a symlink: /etc/rc2.d/S76nscd dpkg: warning: old pre-removal script returned error exit status 102 dpkg - trying script from the new package instead ... invoke-rc.d: not a symlink: /etc/rc2.d/S76nscd dpkg: error processing /var/cache/apt/archives/nscd_2.11.1-0ubuntu7.8_amd64.deb (--unpack): subprocess new pre-removal script returned error exit status 102 update-rc.d: warning: /etc/rc2.d/S76nscd is not a symbolic link invoke-rc.d: not a symlink: /etc/rc2.d/S76nscd dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 102 Errors were encountered while processing: /var/cache/apt/archives/nscd_2.11.1-0ubuntu7.8_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) What should I do to resolve this error? I have tried sudo dpkg --remove --force-remove-reinstreq nscd but it did not work.

  Read the article

• dpkg reporting as installed, uninstalled kernels

  - by Tony Martin

  I have run the following command to remove old kernels: dpkg -l 'linux-*' | sed '/^ii/!d;/'"$(uname -r | sed "s/\(.*\)-\([^0-9]\+\)/\1/")"'/d;s/^[^ ]* [^ ]* \([^ ]*\).*/\1/;/[0-9]/!d' | xargs sudo apt-get -y purge and only the current kernel is now installed, which I have confirmed in synaptic and by checking my boot partition. However, when I run: dpkg --list | grep linux-image I get the following response: rc linux-image-3.13.0-30-generic 3.13.0-30.55 amd64 Linux kernel image for version 3.13.0 on 64 bit x86 SMP rc linux-image-3.13.0-32-generic 3.13.0-32.57 amd64 Linux kernel image for version 3.13.0 on 64 bit x86 SMP ii linux-image-3.13.0-34-generic 3.13.0-34.60 amd64 Linux kernel image for version 3.13.0 on 64 bit x86 SMP rc linux-image-extra-3.13.0-30-generic 3.13.0-30.55 amd64 Linux kernel extra modules for version 3.13.0 on 64 bit x86 SMP rc linux-image-extra-3.13.0-32-generic 3.13.0-32.57 amd64 Linux kernel extra modules for version 3.13.0 on 64 bit x86 SMP ii linux-image-extra-3.13.0-34-generic 3.13.0-34.60 amd64 Linux kernel extra modules for version 3.13.0 on 64 bit x86 SMP ii linux-image-generic 3.13.0.34.40 amd64 Generic Linux kernel image Probably not a problem, but just wondering why versions -30 and -32 are reported as present. Can it be rectified? TIA

  Read the article

• Finding the heaviest length-constrained path in a weighted Binary Tree

  - by Hristo

  UPDATE I worked out an algorithm that I think runs in O(n*k) running time. Below is the pseudo-code: routine heaviestKPath( T, k ) // create 2D matrix with n rows and k columns with each element = -8 // we make it size k+1 because the 0th column must be all 0s for a later // function to work properly and simplicity in our algorithm matrix = new array[ T.getVertexCount() ][ k + 1 ] (-8); // set all elements in the first column of this matrix = 0 matrix[ n ][ 0 ] = 0; // fill our matrix by traversing the tree traverseToFillMatrix( T.root, k ); // consider a path that would arc over a node globalMaxWeight = -8; findArcs( T.root, k ); return globalMaxWeight end routine // node = the current node; k = the path length; node.lc = node’s left child; // node.rc = node’s right child; node.idx = node’s index (row) in the matrix; // node.lc.wt/node.rc.wt = weight of the edge to left/right child; routine traverseToFillMatrix( node, k ) if (node == null) return; traverseToFillMatrix(node.lc, k ); // recurse left traverseToFillMatrix(node.rc, k ); // recurse right // in the case that a left/right child doesn’t exist, or both, // let’s assume the code is smart enough to handle these cases matrix[ node.idx ][ 1 ] = max( node.lc.wt, node.rc.wt ); for i = 2 to k { // max returns the heavier of the 2 paths matrix[node.idx][i] = max( matrix[node.lc.idx][i-1] + node.lc.wt, matrix[node.rc.idx][i-1] + node.rc.wt); } end routine // node = the current node, k = the path length routine findArcs( node, k ) if (node == null) return; nodeMax = matrix[node.idx][k]; longPath = path[node.idx][k]; i = 1; j = k-1; while ( i+j == k AND i < k ) { left = node.lc.wt + matrix[node.lc.idx][i-1]; right = node.rc.wt + matrix[node.rc.idx][j-1]; if ( left + right > nodeMax ) { nodeMax = left + right; } i++; j--; } // if this node’s max weight is larger than the global max weight, update if ( globalMaxWeight < nodeMax ) { globalMaxWeight = nodeMax; } findArcs( node.lc, k ); // recurse left findArcs( node.rc, k ); // recurse right end routine Let me know what you think. Feedback is welcome. I think have come up with two naive algorithms that find the heaviest length-constrained path in a weighted Binary Tree. Firstly, the description of the algorithm is as follows: given an n-vertex Binary Tree with weighted edges and some value k, find the heaviest path of length k. For both algorithms, I'll need a reference to all vertices so I'll just do a simple traversal of the Tree to have a reference to all vertices, with each vertex having a reference to its left, right, and parent nodes in the tree. Algorithm 1 For this algorithm, I'm basically planning on running DFS from each node in the Tree, with consideration to the fixed path length. In addition, since the path I'm looking for has the potential of going from left subtree to root to right subtree, I will have to consider 3 choices at each node. But this will result in a O(n*3^k) algorithm and I don't like that. Algorithm 2 I'm essentially thinking about using a modified version of Dijkstra's Algorithm in order to consider a fixed path length. Since I'm looking for heaviest and Dijkstra's Algorithm finds the lightest, I'm planning on negating all edge weights before starting the traversal. Actually... this doesn't make sense since I'd have to run Dijkstra's on each node and that doesn't seem very efficient much better than the above algorithm. So I guess my main questions are several. Firstly, do the algorithms I've described above solve the problem at hand? I'm not totally certain the Dijkstra's version will work as Dijkstra's is meant for positive edge values. Now, I am sure there exist more clever/efficient algorithms for this... what is a better algorithm? I've read about "Using spine decompositions to efficiently solve the length-constrained heaviest path problem for trees" but that is really complicated and I don't understand it at all. Are there other algorithms that tackle this problem, maybe not as efficiently as spine decomposition but easier to understand? Thanks.

  Read the article

• Using Sitecore RenderingContext Parameters as MVC controller action arguments

  - by Kyle Burns

  I have been working with the Technical Preview of Sitecore 6.6 on a project and have been for the most part happy with the way that Sitecore (which truly is an MVC implementation unto itself) has been expanded to support ASP.NET MVC. That said, getting up to speed with the combined platform has not been entirely without stumbles and today I want to share one area where Sitecore could have really made things shine from the "it just works" perspective. A couple days ago I was asked by a colleague about the usage of the "Parameters" field that is defined on Sitecore's Controller Rendering data template. Based on the standard way that Sitecore handles a field named Parameters, I was able to deduce that the field expected key/value pairs separated by the "&" character, but beyond that I wasn't sure and didn't see anything from a documentation perspective to guide me, so it was time to dig and find out where the data in the field was made available. My first thought was that it would be really nice if Sitecore handled the parameters in this field consistently with the way that ASP.NET MVC handles the various parameter collections on the HttpRequest object and automatically maps them to parameters of the action method executing. Being the hopeful sort, I configured a name/value pair on one of my renderings, added a parameter with matching name to the controller action and fired up the bugger to see... that the parameter was not populated. Having established that the field's value was not going to be presented to me the way that I had hoped it would, the next assumption that I would work on was that Sitecore would handle this field similar to how they handle other similar data and would plug it into some ambient object that I could reference from within the controller method. After a considerable amount of guessing, testing, and cracking code open with Redgate's Reflector (a must-have companion to Sitecore documentation), I found that the most direct way to access the parameter was through the ambient RenderingContext object using code similar to: string myArgument = string.Empty; var rc = Sitecore.Mvc.Presentation.RenderingContext.CurrentOrNull; if (rc != null) {     var parms = rc.Rendering.Parameters;     myArgument = parms["myArgument"]; } At this point, we know how this field is used out of the box from Sitecore and can provide information from Sitecore's Content Editor that will be available when the controller action is executing, but it feels a little dirty. In order to properly test the action method I would have to do a lot of setup work and possible use an isolation framework such as Pex and Moles to get at a value that my action method is dependent upon. Notice I said that my method is dependent upon the value but in order to meet that dependency I've accepted another dependency upon Sitecore's RenderingContext.  I'm a big believer in, when possible, ensuring that any piece of code explicitly advertises dependencies using the method signature, so I found myself still wanting this to work the same as if the parameters were in the request route, querystring, or form by being able to add a myArgument parameter to the action method and have this parameter populated by the framework. Lucky for us, the ASP.NET MVC framework is extremely flexible and provides some easy to grok and use extensibility points. ASP.NET MVC is able to provide information from the request as input parameters to controller actions because it uses objects which implement an interface called IValueProvider and have been registered to service the application. The most basic statement of responsibility for an IValueProvider implementation is "I know about some data which is indexed by key. If you hand me the key for a piece of data that I know about I give you that data". When preparing to invoke a controller action, the framework queries registered IValueProvider implementations with the name of each method argument to see if the ValueProvider can supply a value for the parameter. (the rest of this post will assume you're working along and make a lot more sense if you do) Let's pull Sitecore out of the equation for a second to simplify things and create an extremely simple IValueProvider implementation. For this example, I first create a new ASP.NET MVC3 project in Visual Studio, selecting "Internet Application" and otherwise taking defaults (I'm assuming that anyone reading this far in the post either already knows how to do this or will need to take a quick run through one of the many available basic MVC tutorials such as the MVC Music Store). Once the new project is created, go to the Index action of HomeController.  This action sets a Message property on the ViewBag to "Welcome to ASP.NET MVC!" and invokes the View, which has been coded to display the Message. For our example, we will remove the hard coded message from this controller (although we'll leave it just as hard coded somewhere else - this is sample code). For the first step in our exercise, add a string parameter to the Index action method called welcomeMessage and use the value of this argument to set the ViewBag.Message property. The updated Index action should look like: public ActionResult Index(string welcomeMessage) {     ViewBag.Message = welcomeMessage;     return View(); } This represents the entirety of the change that you will make to either the controller or view.  If you run the application now, the home page will display and no message will be presented to the user because no value was supplied to the Action method. Let's now write a ValueProvider to ensure this parameter gets populated. We'll start by creating a new class called StaticValueProvider. When the class is created, we'll update the using statements to ensure that they include the following: using System.Collections.Specialized; using System.Globalization; using System.Web.Mvc; With the appropriate using statements in place, we'll update the StaticValueProvider class to implement the IValueProvider interface. The System.Web.Mvc library already contains a pretty flexible dictionary-like implementation called NameValueCollectionValueProvider, so we'll just wrap that and let it do most of the real work for us. The completed class looks like: public class StaticValueProvider : IValueProvider {     private NameValueCollectionValueProvider _wrappedProvider;     public StaticValueProvider(ControllerContext controllerContext)     {         var parameters = new NameValueCollection();         parameters.Add("welcomeMessage", "Hello from the value provider!");         _wrappedProvider = new NameValueCollectionValueProvider(parameters, CultureInfo.InvariantCulture);     }     public bool ContainsPrefix(string prefix)     {         return _wrappedProvider.ContainsPrefix(prefix);     }     public ValueProviderResult GetValue(string key)     {         return _wrappedProvider.GetValue(key);     } } Notice that the only entry in the collection matches the name of the argument to our HomeController's Index action.  This is the important "secret sauce" that will make things work. We've got our new value provider now, but that's not quite enough to be finished. Mvc obtains IValueProvider instances using factories that are registered when the application starts up. These factories extend the abstract ValueProviderFactory class by initializing and returning the appropriate implementation of IValueProvider from the GetValueProvider method. While I wouldn't do so in production code, for the sake of this example, I'm going to add the following class definition within the StaticValueProvider.cs source file: public class StaticValueProviderFactory : ValueProviderFactory {     public override IValueProvider GetValueProvider(ControllerContext controllerContext)     {         return new StaticValueProvider(controllerContext);     } } Now that we have a factory, we can register it by adding the following line to the end of the Application_Start method in Global.asax.cs: ValueProviderFactories.Factories.Add(new StaticValueProviderFactory()); If you've done everything right to this point, you should be able to run the application and be presented with the home page reading "Hello from the value provider!". Now that you have the basics of the IValueProvider down, you have everything you need to enhance your Sitecore MVC implementation by adding an IValueProvider that exposes values from the ambient RenderingContext's Parameters property. I'll provide the code for the IValueProvider implementation (which should look VERY familiar) and you can use the work we've already done as a reference to create and register the factory: public class RenderingContextValueProvider : IValueProvider {     private NameValueCollectionValueProvider _wrappedProvider = null;     public RenderingContextValueProvider(ControllerContext controllerContext)     {         var collection = new NameValueCollection();         var rc = RenderingContext.CurrentOrNull;         if (rc != null && rc.Rendering != null)         {             foreach(var parameter in rc.Rendering.Parameters)             {                 collection.Add(parameter.Key, parameter.Value);             }         }         _wrappedProvider = new NameValueCollectionValueProvider(collection, CultureInfo.InvariantCulture);         }     public bool ContainsPrefix(string prefix)     {         return _wrappedProvider.ContainsPrefix(prefix);     }     public ValueProviderResult GetValue(string key)     {         return _wrappedProvider.GetValue(key);     } } In this post I've discussed the MVC IValueProvider used to map data to controller action method arguments and how this can be integrated into your Sitecore 6.6 MVC solution.

  Read the article

• Une Release Candidate de Ubuntu 10.04 LTS pour patienter avant la sortie officielle de "Lucid Lynx"

  Mise à jour du 23/04/10 Ubuntu 10.04 LTS arrive la semaine prochaine Canonical sort une Release Candidate en attendant Canonical vient de sortir la Release Candidate (RC) de Unbuntu 10.04 (alias Lucid Lynx). Rien de bien nouveau par rapport aux versions précédentes (lire ci-avant), si ce n'est une finition améliorée - avec notamment de nouveaux fonds d'écran. Le principal intérêt de cette RC est surtout de faire patienter jusqu'à la sortie de la version définitive prévue elle pour la semaine prochaine. Le jeudi 29 avril très exactement. Pour les impatients donc, la RC de Lucid Lynx...

  Read the article

• Recover a deleted webpage

  - by rc

  Suppose, a blog or a nice article was hosted on a website and it got deleted or worse the website was brought down. How do you view that web page? I tried searching for the cached version in Google. But, looks like the content was deleted long ago and is not listed in the search results directly. There are annotations to the link from many other sites, but still the actual content is not fully available. Now, can anybody help me see this page... I am actually looking for http://effectize.com/become-coolest-programmer :) And, moreover, in addition to bookmarking a favorite link, is it possible to cache the content of the link as well for later reference in case it gets deleted? EDIT: Looks like a URL can be cached for future reference. Try: http://backupurl.com/

  Read the article

• Upstart: sense of "stop on..." stanza when job is a task

  - by Binarus

  Hi, an upstart question (I think I have read all relevant man pages but could not find the answer there): What is the sense of using a "stop on ..." stanza in the definition of a job which is a task? The manuals tell us that such a job, after being started, just waits until its script (or exec stanza) is executed completely, and then stops automatically. Given that, what is the point in using "stop on ..." stanzas in such job definitions? For example, this is the job definition for Upstart's (very important) rc job in Natty 11.04 (leaving out comments and empty lines): start on runlevel [0123456] stop on runlevel [!$RUNLEVEL] export RUNLEVEL export PREVLEVEL console output env INIT_VERBOSE task exec /etc/init.d/rc $RUNLEVEL IMHO, the job, after being started by a runlevel event, will be stopped automatically as soon as /etc/init.d/rc $RUNLEVEL has finished. Thank you very much for any explanation!

  Read the article

• Sense of "stop on..." stanza when job is a task

  - by Binarus

  Hi, an upstart question (I think I have read all relevant man pages but could not find the answer there): What is the sense of using a "stop on ..." stanza in the definition of a job which is a task? The manuals tell us that such a job, after being started, just waits until its script (or exec stanza) is executed completely, and then stops automatically. Given that, what is the point in using "stop on ..." stanzas in such job definitions? For example, this is the job definition for Upstart's (very important) rc job in Natty 11.04 (leaving out comments and empty lines): start on runlevel [0123456] stop on runlevel [!$RUNLEVEL] export RUNLEVEL export PREVLEVEL console output env INIT_VERBOSE task exec /etc/init.d/rc $RUNLEVEL IMHO, the job, after being started by a runlevel event, will be stopped automatically as soon as /etc/init.d/rc $RUNLEVEL has finished. Thank you very much for any explanation!

  Read the article

• Apache: Setting up local test server with subdomains

  - by RC

  Hi everyone, I have XAMPP running on my desktop machine, and I do all my work on it with no issue. http://localhost ---> points to public_html http://site1.localhost ---> points to site 1 http://site2.localhost ---> points to site 2 http://site3.localhost ---> points to site 3 Entering the above URLs in my web browser on the machine with Apache works great, and I can work on multiple sites within distinct subdomains. But what I want to do now is to transfer Apache and all the files to another Windows 7 machine within the LAN, but still be able to view the subdomains from my main development machine. With a vanilla XAMPP installation on the new hosting machine, entering the IP address of that machine (e.g. 192.168.1.10) into my development computer would send me to the main public_html folder. But how do I set up subdomains such that I can access it externally? For example, http://site1.devmachine Thanks for any help.

  Read the article

• How to Make the Gnome Panels in Ubuntu Totally Transparent

  - by The Geek

  We all love transparency, since it makes your desktop so beautiful and lovely—so today we’re going to show you how to apply transparency to the panels in your Ubuntu Gnome setup. It’s an easy process, and here’s how to do it. This article is the first part of a multi-part series on how to customize the Ubuntu desktop, written by How-To Geek reader and ubergeek, Omar Hafiz. Making the Gnome Panels Transparent Of course we all love transparency, It makes your desktop so beautiful and lovely. So you go for enabling transparency in your panels , you right click on your panel, choose properties, go to the Background tab and make your panel transparent. Easy right? But instead of getting a lovely transparent panel, you often get a cluttered, ugly panel like this: Fortunately it can be easily fixed, all we need to do is to edit the theme files. If your theme is one of those themes that came with Ubuntu like Ambiance then you’ll have to copy it from /usr/share/themes to your own .themes directory in your Home Folder. You can do so by typing the following command in the terminal cp /usr/share/themes/theme_name ~/.themes Note: don’t forget to substitute theme_name with the theme name you want to fix. But if your theme is one you downloaded then it is already in your .themes folder. Now open your file manager and navigate to your home folder then do to .themes folder. If you can’t see it then you probably have disabled the “View hidden files” option. Press Ctrl+H to enable it. Now in .themes you’ll find your previously copied theme folder there, enter it then go to gtk-2.0 folder. There you may find a file named “panel.rc”, which is a configuration file that tells your panel how it should look like. If you find it there then rename it to “panel.rc.bak”. If you don’t find don’t panic! There’s nothing wrong with your system, it’s just that your theme decided to put the panel configurations in the “gtkrc” file. Open this file with your favorite text editor and at the end of the file there is line that looks like this “include “apps/gnome-panel.rc””. Comment out this line by putting a hash mark # in front of it. Now it should look like this “# include “apps/gnome-panel.rc”” Save and exit the text editor. Now change your theme to any other one then switch back to the one you edited. Now your panel should look like this: Stay tuned for the second part in the series, where we’ll cover how to change the color and fonts on your panels. Latest Features How-To Geek ETC How To Remove People and Objects From Photographs In Photoshop Ask How-To Geek: How Can I Monitor My Bandwidth Usage? Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware How to Change the Default Application for Android Tasks Stop Believing TV’s Lies: The Real Truth About "Enhancing" Images The Legend of Zelda – 1980s High School Style [Video] Suspended Sentence is a Free Cross-Platform Point and Click Game Build a Batman-Style Hidden Bust Switch Make Your Clock Creates a Custom Clock for your Android Homescreen Download the Anime Angels Theme for Windows 7 CyanogenMod Updates; Rolls out Android 2.3 to the Less Fortunate

  Read the article

• Taking screenshot with Win32 API (C# pInvoke) not working in IIS

  - by Dillen Meijboom

  I want to take a screenshot of an external website. Currently my workflow is to start a Firefox instance with the specified URL and take a screenshot using PrintWindow in the Win32 API When I run this application in IISExpress it works fine but when I run the same application in IIS on a windows VPS it is not working (screenshot is blank). I don't know what I'm doing wrong? My code: using Newtonsoft.Json; using System; using System.Collections.Generic; using System.Diagnostics; using System.Drawing; using System.Drawing.Imaging; using System.Linq; using System.Runtime.InteropServices; using System.Security; using System.Threading; using System.Web; namespace WebTools.Web { public class RemoteScreenshot { public static Bitmap TakeScreenshot(Process process) { // may need a process Refresh before return TakeScreenshot(process.MainWindowHandle); } public static Bitmap TakeScreenshot(IntPtr handle) { RECT rc = new RECT(); GetWindowRect(handle, ref rc); Bitmap bitmap = new Bitmap(rc.right - rc.left, rc.bottom - rc.top); using (Graphics graphics = Graphics.FromImage(bitmap)) { PrintWindow(handle, graphics.GetHdc(), 0); } return bitmap; } [DllImport("user32.dll")] private static extern bool GetWindowRect(IntPtr hWnd, ref RECT rect); [DllImport("user32.dll")] private static extern bool PrintWindow(IntPtr hWnd, IntPtr hDC, int flags); [StructLayout(LayoutKind.Sequential)] private struct RECT { public int left; public int top; public int right; public int bottom; } public static void Save(string url, string file, int timeout = 0) { Process.Start(new ProcessStartInfo("C:\\Program Files (x86)\\Mozilla Firefox\\firefox.exe", url) { CreateNoWindow = false, WindowStyle = ProcessWindowStyle.Maximized }); Thread.Sleep(timeout); var bitmap = TakeScreenshot(Process.GetProcessesByName("firefox").First()); bitmap.Save(file, ImageFormat.Png); bitmap.Dispose(); Process.GetProcessesByName("firefox").First().Kill(); } } } EDIT: Running Firefox works fine because the AppPool is under another account that has the rights to execute firefox.

  Read the article

• Call dll - pcshll32.dll using delphi

  - by Davis

  Hi, I need to call hllapi function of pcshll32.dll using delphi. It's works with personal communications of ibm. How can i change the code bellow to delphi ? Thanks !!! The EHLLAPI entry point (hllapi) is always called with the following four parameters: EHLLAPI Function Number (input) Data Buffer (input/output) Buffer Length (input/output) Presentation Space Position (input); Return Code (output) The prototype for IBM Standard EHLLAPI is: [long hllapi (LPWORD, LPSTR, LPWORD, LPWORD); The prototype for IBM Enhanced EHLLAPI is: [long hllapi (LPINT, LPSTR, LPINT, LPINT); Each parameter is passed by reference not by value. Thus each parameter to the function call must be a pointer to the value, not the value itself. For example, the following is a correct example of calling the EHLLAPI Query Session Status function: #include "hapi_c.h" struct HLDQuerySessionStatus QueryData; int Func, Len, Rc; long Rc; memset(QueryData, 0, sizeof(QueryData)); // Init buffer QueryData.qsst_shortname = ©A©; // Session to query Func = HA_QUERY_SESSION_STATUS; // Function number Len = sizeof(QueryData); // Len of buffer Rc = 0; // Unused on input hllapi(&Func, (char *)&QueryData, &Len, &Rc); // Call EHLLAPI if (Rc != 0) { // Check return code // ...Error handling } All the parameters in the hllapi call are pointers and the return code of the EHLLAPI function is returned in the value of the 4th parameter, not as the value of the function.

  Read the article

• .NET OCRing an Image

  - by Kirschstein

  I'm trying to use MODI to OCR a window's program. It works fine for screenshots I grab programmatically using win32 interop like this: public string SaveScreenShotToFile() { RECT rc; GetWindowRect(_hWnd, out rc); int width = rc.right - rc.left; int height = rc.bottom - rc.top; Bitmap bmp = new Bitmap(width, height); Graphics gfxBmp = Graphics.FromImage(bmp); IntPtr hdcBitmap = gfxBmp.GetHdc(); PrintWindow(_hWnd, hdcBitmap, 0); gfxBmp.ReleaseHdc(hdcBitmap); gfxBmp.Dispose(); string fileName = @"c:\temp\screenshots\" + Guid.NewGuid().ToString() + ".bmp"; bmp.Save(fileName); return fileName; } This image is then saved to a file and ran through MODI like this: private string GetTextFromImage(string fileName) { MODI.Document doc = new MODI.DocumentClass(); doc.Create(fileName); doc.OCR(MODI.MiLANGUAGES.miLANG_ENGLISH, true, true); MODI.Image img = (MODI.Image)doc.Images[0]; MODI.Layout layout = img.Layout; StringBuilder sb = new StringBuilder(); for (int i = 0; i < layout.Words.Count; i++) { MODI.Word word = (MODI.Word)layout.Words[i]; sb.Append(word.Text); sb.Append(" "); } if (sb.Length > 1) sb.Length--; return sb.ToString(); } This part works fine, however, I don't want to OCR the entire screenshot, just portions of it. I try cropping the image programmatically like this: private string SaveToCroppedImage(Bitmap original) { Bitmap result = original.Clone(new Rectangle(0, 0, 250, 250), original.PixelFormat); var fileName = "c:\\" + Guid.NewGuid().ToString() + ".bmp"; result.Save(fileName, original.RawFormat); return fileName; } and then OCRing this smaller image, however MODI throws an exception; 'OCR running error', the error code is -959967087. Why can MODI handle the original bitmap but not the smaller version taken from it?

  Read the article

• Presentmodalviewcontroller method problem with retain count

  - by Infinity

  Hello guys! I am trying to present a modal view controller. I have read the documentation, but something is strange. Here's my code: NSLog(@"rc: %d", [modalViewController retainCount]); UINavigationController *navigationController = [[UINavigationController alloc] initWithRootViewController:modalViewController]; [self presentModalViewController:navigationController animated:YES]; [navigationController release]; NSLog(@"rc: %d", [modalViewController retainCount]); And on the console, appears: rc: 2 rc: 24 And I think 24 is very strange... What do you thin? Why is this happening?

  Read the article

• How to record / capture audio with RecordControl on Java ME, SE K770i

  - by tomaszs

  I want to record sound on my Java ME App on K770i. So I used this: http://java.sun.com/javame/reference/apis/jsr135/javax/microedition/media/control/RecordControl.html example of RecordControl in my code. It goes like this: import java.util.Vector; import javax.microedition.lcdui.Choice; import javax.microedition.lcdui.Command; import javax.microedition.lcdui.CommandListener; import javax.microedition.lcdui.Display; import javax.microedition.lcdui.Displayable; import javax.microedition.lcdui.List; import javax.microedition.media.Manager; import javax.microedition.media.MediaException; import javax.microedition.midlet.MIDlet; import java.io.*; import javax.microedition.lcdui.*; import javax.microedition.media.*; import javax.microedition.media.control.*; import javax.microedition.midlet.*; import javax.microedition.rms.*; (...) try { // Create a Player that captures live audio. Player p = Manager.createPlayer("capture://audio"); p.realize(); // Get the RecordControl, set the record stream, // start the Player and record for 5 seconds. RecordControl rc = (RecordControl)p.getControl("RecordControl"); ByteArrayOutputStream output = new ByteArrayOutputStream(); rc.setRecordStream(output); rc.startRecord(); p.start(); Thread.currentThread().sleep(5000); rc.commit(); p.close(); } catch (IOException ioe) { } catch (MediaException me) { } catch (InterruptedException ie) { } But unfortunately when I try to build it, it tells me: *** Creating directories *** *** Compiling source files *** ..\src\example\audiodemo\AudioPlayer.java:121: cannot find symbol symbol : class RecordControl location: class example.audiodemo.AudioPlayer RecordControl rc = (RecordControl)p.getControl("RecordControl"); ^ ..\src\example\audiodemo\AudioPlayer.java:121: cannot find symbol symbol : class RecordControl location: class example.audiodemo.AudioPlayer RecordControl rc = (RecordControl)p.getControl("RecordControl"); ^ 2 errors So my question is: why there is no RecordControl class if in documentations it is written this class should be there. Or is there other method to record / capture audio from microfone in Java ME of Sony Ericsson? How do you record sound?

  Read the article

• readUTF timeout

  - by Hassan Voyeau

  I am getting a timeout with the following code at readUTF. Any idea why? hc = (HttpConnection) Connector.open("http://twitter.com/statuses/user_timeline/" + username + ".json"); int rc = hc.getResponseCode(); if (rc != HttpConnection.HTTP_OK) { throw new IOException("HTTP response code: " + rc); } DataInputStream dataInputStream = hc.openDataInputStream(); String list = dataInputStream.readUTF();

  Read the article

• can anyone help how to get data from a plist, precisely inside the array

  - by jix

  Can anyone help me with getting data from this plist? I'm having trouble accessing the values of the three objects in the plist. i can see all the list of countries in my tableView, but i can't see the prices when i tap on a cell . any help please thanks MY PLIST <plist version="1.0"> <dict> <key>Afghanistan 3</key> <array> <string>RC $1.65</string> <string>CC $2.36</string> <string>EC 0</string> </array> <key>Albania 1</key> <array> <string>RC FREE</string> <string>CC $1.01</string> </array> <key>Algeria 2</key> <array> <string>RC $0.27</string> <string>CC $0.85</string> </array> <key>Andorra 2</key> <array> <string>RC FREE</string> <string>CC $0.93</string> also my code that i have implemented in xcode 4.5 . cc is the calling rate that is in item 0 in the plist rc is the receiving rate that is in item 1 in the plist ec is the extra rate that is in item 2 in the plist how can i see the cc ,rc, & ec each in a label when i click the cell in the next view controller ? MY CODE NSString *ratesFile = [[NSBundle mainBundle] pathForResource:@"rates" ofType:@"plist"]; rates = [[NSDictionary alloc]initWithContentsOfFile:ratesFile]; NSArray * dictionaryKeys = [rates allKeys]; name = [dictionaryKeys sortedArrayUsingSelector:@selector(compare:)]; cc = [rates objectForKey:@"Item 0"]; rc = [rates objectForKey:@"Item 1"]; ec = [rates objectForKey:@"Item 2"]; - (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section { return [rates count]; } - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { static NSString *CellIdentifier = @"Cell"; UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; if (cell == nil) { cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier]; cell.accessoryType = UITableViewCellAccessoryDisclosureIndicator; } NSString *countryName = [name objectAtIndex:indexPath.row]; cell.textLabel.text = countryName; } - (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath { NSString *ccRate = [cc objectAtIndex:indexPath.row]; if (!self.detailViewController) { self.detailViewController = [[DetailViewController alloc] initWithNibName:@"DetailViewController" bundle:nil]; } self.detailViewController.detailItem = ccRate; [self.navigationController pushViewController:self.detailViewController animated:YES]; } thank in advance

  Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >