Search Results

Search found 7118 results on 285 pages for 'sam ram san'.

Page 14/285 | < Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >

  • Computer keeps restarting [closed]

    - by Joris
    I have a strange problem with my desktop pc, when I start it, it just restarts immediately, it displays the bios/motherboard logo and then restarts. I can't access the bios to edit settings because it restarts to fast. Then I tried different things to fix it with mixed success. (I also tried to reset the bios without success) I noticed that a capacity from the graphics card was broken (it looked exploded) so I ordered a new graphics card & plugged it in the computer. It didn't change much, still the same problem. Then I unplugged everything that's not necessary and put only 1Gig RAM in the motherboard (usually it has 4 x 1Gig RAM) and the computer started, then I putted another gig of RAM and the computer still started. (starting=booting windows) When I putted in the 3th RAM it didn't boot anymore (again restarting all the time) so I removed this 3th gig of RAM and this is where it gets weird. I expected the computer to boot again because it is exactly the same configuration as before - which worked - but the computer didn't want to start. It just gave the same problem as before (restarting all the time.. ) Anyone an idea what might be wrong?

    Read the article

  • Lubuntu 12.04 on Acer laptop boots to blank blue screen

    - by WGCman
    My previous question on this was closed, but I am posting it again as the solution which my son eventually found may assist other users of the forum, or someone may be able to tweak the solution to improve the performance. Having installed Kubuntu 12.04.01 from a live USB onto my desktop, I wanted to do the same on my laptop, an Acer Aspire 1362 Laptop, which has 256MB RAM (actually 512 "on the box", but a good deal can be borrowed by the graphics!). I found Kubuntu wouldn't run on so little memory but downloaded: Lubuntu-12.04-alternate-i386.iso, which I understood was light enough to go. The laptop has one internal 40GB Toshiba hard drive divided into 3 partitions: C,19GB with Windows XP, Windows program files and some data, D, 19GB mostly data, and a small 2GB partition with some Acer software, which XP can't normally “see”. I transferred most of the contents of D to a memory stick, leaving 16GB free for Lubuntu. I did not want to dump XP yet, though it is painfully slow. I installed Lubuntu from then USB stick, accepting the default answers to most of the questions. The D: partition was further partitioned into a 500MB boot partition, 10GB for Linux, 2GB Swap and 6GB for data shareable between Linux and Windows. I had no error messages during installation, rebooted, was offered the choice of Ubuntu or XP, and selected the former. After a few minutes, I get a dark blue screen announcing Lubuntu with five dots underneath which lighten in turn. Eventually the lights stopped, and whatever I try the screen remains blank apart from “Lubuntu” I tried several solutions suggested on the forum for “identical” questions but without success.

    Read the article

  • Restart Fibre channel controller after blade bootup IBM HS bladecentre

    - by Spence
    I have a remote system that needs to resume on startup. If the system is simply powered on then the blades boot before the SAN is online and then the only thing you can do is restart the systems. Is it possible to restart the fibre channel controller? That way I could have a system restart the controller after boot, connect to the SAN and then restart all servers requiring SAN information? Please note that I'm not a sys admin, just shooting for ideas to get a clean startup to work, apologies if my terminology is wrong.

    Read the article

  • Reconnect Attempts for CIFS share

    - by Davin
    I have a CIFS share mounted in the FSTAB on Ubuntu server, which connects to our SAN and works without issue. Last night we had an issue with the SAN for about 12 hours. We corrected the problem and the Windows boxes restored their mappings. The Ubuntu box did not, but we were able to restore with [mount -a]. I saw options to specify retries in man for NFS but not CIFS. Any ideas on ensuring a reconnect if the SAN goes down again?

    Read the article

  • fdisk -l only displays boot partition

    - by Franklin
    I have a SAN, and it's able to read and write to the 50TB RAID just fine, but when I run fdisk -l it only lists the boot partition of the SAN server, and doesn't display anything about the other partitions on the RAID. I've also tried using parted -l with the same result. Now when I type mount it shows that the partitions are mounted just fine. I've never seen this happen. The box is running Openfiler 2.3 (I know it's old, we're in the process of upgrading all our old equipment). We have another SAN that's configured almost identically, and it's able to display the partition info with either of the two commands I mentioned above.

    Read the article

  • Java Embedded @ JavaOne: Q & A

    - by terrencebarr
    There has been a lot of interest in Java Embedded @ JavaOne since it was announced a short while ago (see my previous post). As this is a new conference we did get a number of questions regarding the conference. So we put together a brief Q & A on audience focus, dates, registrations, pricing, submissions, etc. Hope this helps and, remember, the Call for Papers ends next week, Jul 18th 2012! Cheers, – Terrence    Java Embedded @ JavaOne : Q & A  Q. Where can I learn more about “Java Embedded @ JavaOne”? A. Please visit: http://oracle.com/javaone/embedded Q. What is the purpose of “Java Embedded @ JavaOne”? A. This net-new event is designed to provide business and technical decision makers, as well as Java embedded ecosystem partners, a unique occasion to come together and learn about how they can use Java Embedded technologies for new business opportunities. Q. What broad audiences would benefit by attending “Java Embedded @ JavaOne”? A. Java licensees; Government agencies; ISVs, Device Manufacturers; Service Providers such as Telcos, Utilities, Healthcare, Energy, Smart Grid/Smart Metering; Automotive/Telematics; Home/Building Automation; Factory Automation; Media/TV; and Payment vendors. Q. What business titles would benefit by attending “Java Embedded @ JavaOne”? A. The ideal audience for this event is business and technical decision makers (e.g. System Integrators, CTO, CXO, Chief Architects/Architects, Business Development Managers, Project Managers, Purchasing managers, Technical Leads, Senior Decision Makers, Practice Leads, R&D Heads, and Development Managers/Leads). Q. When is “Java Embedded @ JavaOne” taking place? A. The event takes place on Wednesday, Oct. 3th through Thursday, Oct. 4th. Q. Where is “Java Embedded @ JavaOne” taking place? A. The event takes place in the Hotel Nikko. Q. Won’t “Java Embedded @ JavaOne” impact the flagship JavaOne conference since the Hotel Nikko is one of the 3 flagship JavaOne conference’s venue hotels? A. No. Separate space in the Hotel Nikko will be used for “Java Embedded @ JavaOne” and will in no way impact scale and scope of the flagship JavaOne conference’s content mix. Q. Will there be a call for papers for “Java Embedded @ JavaOne”? A. Yes.  The call for papers has started but is ONLY for business focused submissions. Q. What type of business submissions can I make for “Java Embedded @ JavaOne”? A. We are accepting 3 types of business submissions: Best Practices: Java Embedded business solutions, methods, and techniques that consistently show results superior to those achieved with other means, as well as discussions on how Java Embedded can improve business operations, and increase competitive differentiation and profitability. Case Studies: Discussions with Oracle customers and partners that describe the unique business drivers that convinced them to implement Java Embedded as part of an infrastructure technology mix. The discussions will highlight the issues they faced, the decision making involved, and the implementation choices made to create value and improve business differentiation. Panel: Moderator-driven open discussion focused on the emerging opportunities Java Embedded offers businesses, as well as other topics such as strategy, overcoming common challenges, etc. Q. What is the call for papers timeline for “Java Embedded @ JavaOne”? A. The timeline is as follows: CFP Launched – June 18th Deadline for submissions – July 18th Notifications (Accepts/Declines) – week of July 29th Deadline for speakers to accept speaker invitation – August 10th Presentations due for review – August 31st Q. Where can I find more call for paper details for “Java Embedded @ JavaOne”? A. Please go to: http://www.oracle.com/javaone/embedded/call-for-papers/information/index.html Q. How much does it cost to attend “Java Embedded @ JavaOne”? A. The cost to attend is: $595.00 U.S. — Early Bird (Launch date – July 13, 2012) $795.00 U.S. — Pre-Registration (July 14 – September 28, 2012) $995.00 U.S. — Onsite Registration (September 29 – October 4, 2012) Q. Can an attendee of the flagship JavaOne event and Oracle OpenWorld attend “Java Embedded @ JavaOne”? ?A. Yes.  Attendees of both the flagship JavaOne event and Oracle OpenWorld can attend “Java Embedded @ JavaOne” by purchasing a $100.00 U.S. upgrade to their full conference pass. Filed under: Mobile & Embedded Tagged: Call for Papers, Java Embedded @ JavaOne, JavaOne San Francisco

    Read the article

  • SQL Server 2005 standard filegroups / files for performance on SAN

    - by Blootac
    I submitted this to stack overflow (here) but realised it should really be on serverfault. so apologies for the incorrect and duplicate posting: Ok so I've just been on a SQL Server course and we discussed the usage scenarios of multiple filegroups and files when in use over local RAID and local disks but we didn't touch SAN scenarios so my question is as follows; I currently have a 250 gig database running on SQL Server 2005 where some tables have a huge number of writes and others are fairly static. The database and all objects reside in a single file group with a single data file. The log file is also on the same volume. My interpretation is that separate data files should be used across different disks to lessen disk contention and that file groups should be used for partitioning of data. However, with a SAN you obviously don't really have the same issue of disk contention that you do with a small RAID setup (or at least we don't at the moment), and standard edition doesn't support partitioning. So in order to improve parallelism what should I do? My understanding of various Microsoft publications is that if I increase the number of data files, separate threads can act across each file separately. Which leads me to the question how many files should I have. One per core? Should I be putting tables and indexes with high levels of activity in separate file groups, each with the same number of data files as we have cores? Thank you

    Read the article

  • SQL Server 2005 standard filegroups / files for performance on SAN

    - by Blootac
    Ok so I've just been on a SQL Server course and we discussed the usage scenarios of multiple filegroups and files when in use over local RAID and local disks but we didn't touch SAN scenarios so my question is as follows; I currently have a 250 gig database running on SQL Server 2005 where some tables have a huge number of writes and others are fairly static. The database and all objects reside in a single file group with a single data file. The log file is also on the same volume. My interpretation is that separate data files should be used across different disks to lessen disk contention and that file groups should be used for partitioning of data. However, with a SAN you obviously don't really have the same issue of disk contention that you do with a small RAID setup (or at least we don't at the moment), and standard edition doesn't support partitioning. So in order to improve parallelism what should I do? My understanding of various Microsoft publications is that if I increase the number of data files, separate threads can act across each file separately. Which leads me to the question how many files should I have. One per core? Should I be putting tables and indexes with high levels of activity in separate file groups, each with the same number of data files as we have cores? Thank you

    Read the article

  • unable to destroy windows 2008 r2 failover cluster after SAN rebuild

    - by Zack
    I created a windows 2008 r2 failover cluster for a sql 2008 active/passive cluster. This two node cluster was using a SAN device for a quorum disk resource as well as MSDTC resource. Well....I decided to reconfigure the SAN device, but I didn't destroy the cluster first. Now that the quorum disk and mstdc disk are completely gone, the cluster is obviously not working. But, I can't even destroy the cluster and start again. I've tried from the Windows Clustering tool, as well as the command line. I was able to get the cluster service to start using the "/fixquorum" parameter. After doing this I was able to remove the passive node from the cluster, but it wouldn't let me destroy the cluster because the default resource group and msdtc are still attached as resources. I tried to delete these resources from both the GUI tool, as well as command line. It will either freeze for several minutes and crash the program, or once it even BSOD'd the server. Can someone advise on how to destroy this cluster so I can start over?

    Read the article

  • wake up from suspend to ram problem

    - by Pupizoid
    I have very strange problem. After suspending to ram notebook doesn't wakes up, only leds and fan switches on, no HDD activity and display stays off(without backlights-completly off). If I press numlock- led doesn't switches, all buttons are not warkable. I have installed uswsusp and tryed to use s2ram, but result is exactly similar. I tryed to remove fglrx, but useless. I have HP Pavilion dv6 2055er with Ubuntu 12.04 on board and: 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV710 [Mobility Radeon HD 4500/5100 Series] How can I solve this problem?

    Read the article

  • Distro that I can load into RAM?

    - by NullUserException
    Is there a modified version of Ubuntu that I can choose to load to RAM on start up? Kinda like the LiveCD, but that can be easily modified (ie: I can install stuff) when I choose to boot from disk. The idea is to install it to a USB drive. I know there's something similar but slax is lacking in many departments. A "full" version Ubuntu would be better. A LiveUSB installation seems to be pretty close to what I want, but apparently I have to choose whether or not it will be persistent by the time I install it. I want to be able to choose that every time I boot.

    Read the article

  • which flavor of Ubuntu works on ASUS P4GE MX mobo with P4 and 1gb ram

    - by user209546
    I have Ubuntu 13.10 installed on ASUS P4GE MX Mother board with Intel 845 Chip set and Pentium 4 processor with 1GB ram. Unity and Dash are not loaded, hence not able to close any page opened by right clicking on blank desktop and entering into 'change desktop background'. Live wall papers are working but the setting page is not closing as no buttons are available on the panel. I removed Ubuntu 13.10 and tried with 13.04 / 12.10 / 12.04 / 11.10 and 11.04. Ubuntu 11.04 is working but the problem is that it out of date and upgrades available. Please provide a way / solution

    Read the article

  • Distro that I can load to ram?

    - by NullUserException
    Is there a modified version of Ubuntu that I can choose to load to RAM on start up? Kinda like the LiveCD, but that can be easily modified (ie: I can install stuff) when I choose to boot from disk. The idea is to install it to a USB drive. I know there's something similar but slax is lacking in many departments. A "full" version Ubuntu would be better. A LiveUSB installation seems to be pretty close to what I want, but apparently I have to choose whether or not it will be persistent by the time I install it. I want to be able to choose that every time I boot.

    Read the article

  • How much RAM required by Varnish?

    - by Gobind Singh Deo
    Hi, I'm using Apache for serving static files. Apache2 require too much RAM. I want to reduce the RAM usage. I don't have experience with Varnish. It's said to be faster. I don't know how Varnish works. So, How much RAM needed for running Apache2+Varnish? Will Apache2+Varnish have higher RAM usage than Apache2 without Varnish? Thanks.

    Read the article

  • Dirty Cache Dell Equallogic Storage Array

    - by Jermal Smith
    has anyone ever run into a dirty cache issue with a Equallogic SAN. Even after replacement of the controller cards in the Equallogic Storage Array fails offline with a dirty cache. I have listed steps here on my blog to bring the SAN online again, however this is not the best solution as it continues to fail. http://jermsmit.com/dirty-cache-dell-equallogic-storage-array/ If you have any info on this please share. Thanks, Jermal

    Read the article

  • High RAM usage, not seen in task manager

    - by r4dk0
    Hi! I am using Windows 7 64-bit 7600, with 4Gb of RAM. I have a serious problem, since something uses a lot of RAM(3.94Gb) and I see "stairs" in taskmanager, it rises to +3Gb RAM and it drops to about 2Gb and then rises slowly again, and suddenly drops. I tryed installing this version again and other versions, newer ones, but no effect. Ive even tryed disconnecting other harddrives while I installed it, and then installed NOD32 and updated it. How could I know what is using that much RAM? P.S.: I was suspecting superfetch service, I disabled it, restarted pc, and it didnt work, since the memory is the highest point when I login with password, it is really annoying since I need about 1minute to see my desktop, neither alone try anything else. After loging in it slowly drops and after random time it starts rising again. That doesnt happen immediately after a fresh windows install. And how the drivers go, I tryed older drivers for GPU, and newest ones.

    Read the article

  • High RAM usage, not seen in task manager

    - by r4dk0
    Hi! I am using Windows 7 64-bit 7600, with 4Gb of RAM. I have a serious problem, since something uses a lot of RAM(3.94Gb) and I see "stairs" in taskmanager, it rises to +3Gb RAM and it drops to about 2Gb and then rises slowly again, and suddenly drops. I tryed installing this version again and other versions, newer ones, but no effect. Ive even tryed disconnecting other harddrives while I installed it, and then installed NOD32 and updated it. How could I know what is using that much RAM? P.S.: I was suspecting superfetch service, I disabled it, restarted pc, and it didnt work, since the memory is the highest point when I login with password, it is really annoying since I need about 1minute to see my desktop, neither alone try anything else. After loging in it slowly drops and after random time it starts rising again. That doesnt happen immediately after a fresh windows install. And how the drivers go, I tryed older drivers for GPU, and newest ones.

    Read the article

  • More RAM in motherboard than CPU can process

    - by Videographer Francisco Ferrer
    As I understand reading in the forum post :" By making more memory available to the system more data can be cached in RAM, so there will be less hard drive activity, and less swapping to memory so your system will perform better." But what happen when motherboard for a desktop that supports( and had install) more RAM than the procesor can handle?(aka:procesor Max Memory Size). Is there any advantage to have a MB that hold a bigger RAM capacity than the CPU? If so, how can this be translate using in a program like Adobe After Effects, RAM preview? thanks

    Read the article

  • How to share a volume between VM in ESX 4 ?

    - by edomaur
    I want to access a single volume from vmware ESX4 vms, in three ESX hosts with datastores in an Equallogic PS6000 SAN. I know how to manage the datas, but I cannot seems to find a way to do this. How can I share VMDK accross hosts ? (the relevant files are on the SAN) Is this even possible ? Is there a mean to do this with RDM ?

    Read the article

  • BSOD & System Failure after trying to install a new RAM

    - by Praveen Kumar
    I have updated the question with sections, so that people won't find it difficult to read. Basic System Information Let me give a basic introduction on my system. I have a system of following configuration: Processor: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz 3.40GHz RAM: Corsair Vengeance - 4GB Single Module DDR3 Memory Kit (CMZ4GX3M1A1600C9) x 2 OS: Windows 7 Ultimate, SP1 Build 7601 HDD: 1 TB Seagate 7200 RPM The Problem It was working fine for about an year. Yesterday I planned to increase my RAM to 16 GB by putting another set of two Corsair Vengeance - 4GB Single Module DDR3 Memory Kit (CMZ4GX3M1A1600C9). I got it from an authorized reseller and also, the RAM was fitted by a service engineer only. After the RAM was fit (all the four), the system failed to start, with an error code of 0x000000f4. The complete information of it is: Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.256.1 Locale ID: 16393 Additional information about the problem: BCCode: f4 BCP1: 0000000000000003 BCP2: FFFFFA8008A39060 BCP3: FFFFFA8008A39340 BCP4: FFFFF800037C8510 OS Version: 6_1_7601 Service Pack: 1_0 Product: 256_1 Files that help describe the problem: C:\Windows\Minidump\093012-13041-01.dmp C:\Users\Praveen Kumar\AppData\Local\Temp\WER-30716-0.sysdata.xml Read our privacy statement online: http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409 If the online privacy statement is not available, please read our privacy statement offline: C:\Windows\system32\en-US\erofflps.txt Another Problem We first thought that it was the RAM, which caused the issue. So I returned the RAMs and now my computer configuration is exactly how it was the previous day. But, following the removal of the RAM, I also had several crashes after that. One suspicious thing was with an error code c0000134: STOP: c0000135 The program can’t start because %hs is missing from your computer . Try resintalling the program to fix this problem. After reading contents from this, this and this, which were never my case, they didn't help me. But I didn't receive any more STOP c0000134 messages. But this 0x000000f4 keeps on coming. I am writing from the same system and it allows me to work for say, half an hour max. Then I hear a device disconnect sound, the one you hear in Windows 7, when a USB Mass Storage Device is plugged out. Immediately following that, my screen goes blank and I get 0x000000f4 blue screen. Okay, now I am really concerned about my Hard Disk data, but I have no clue if there is a problem with the HDD. My Question What all files do I need to submit for your reference? Can this issue be fixed? I am getting more time if I remove my RAM, clean it and then put it back. Weird! Hope I have given the necessary information to help you guys. Thanks in advance. Minidumps I have uploaded all the Minidump DMP files from C:\Windows\Minidump folder here: http://www.praveen-kumar.com/Minidumps.zip Let me know if you face any issues in accessing it. Will be able to share elsewhere. Updates 30-Sep-2012 10:15 AM IST: When I keep the system cover opened, pressed the HDD Cable well, it is allowing me to be on for about half an hour, I guess? Also, I feel that the CPU fan speed is kind of slow. It rotates at around 900 RPM, but the CPU Temperature is not more than 70° C. 30-Sep-2012 10:30 AM IST: My Modem (Beetel 220BX ADSL2+ Router) failed. I have no idea how it is related to this issue, but I thought that I need to document this too. I really have a bad day here. 30-Sep-2012 11:00 AM IST: System still running fine, with the cabinet cover open, now for about an hour. 30-Sep-2012 12:00 PM IST: I shut down the system and closed the cabinet. Started the system, and it hung after giving the password. After a few minutes, got the same 0x000000f4 error. So, while it is in the upright position, fixed the Hard Disk cable and now it is booting fine. Waiting for more observations and answers.

    Read the article

  • How does RAM fail?

    - by ethanlee16
    I have an issue with a Dell Inspiron 15 (1545) laptop that refuses to open any applications (save select Microsoft programs, e.g. Security Essentials, Ctrl Panel, Windows Explorer (not Internet), regedit, Event Viewer, etc.). I've run Microsoft Memory Diagnostics Tool and it found a 'hardware problem was detected.' Does this indicate that the RAM has failed? I notice when I open programs like Word, Excel, Internet Explorer, etc., it always give me an error from WerFault.exe saying The instruction at xxxxxxx referenced memory at xxxxxxxxx. The memory could not be written. and sometimes something about illegal instructions. If it is a hardware problem, does this mean that replacing the RAM is my only option? Again, I would also like to know if RAM can fail (like hard drives) and if malware can cause RAM to fail also.

    Read the article

  • Only 2.99 Gb RAM usable out of 8GB in Windows 8 32 bit [closed]

    - by user1832280
    Possible Duplicate: 8gb ram in 32bit operating system I have installed 8 GB RAM in my system. Also upgraded OS to Windows 8 32 bit. My System configuration: Intel i7 960. Ram Crossair 4 GB X 2 1666Mhz Motherboard Asus Rampage III Gene Video card: NVIDIA GeForce GT 240. 2 TB Seagate I have updated all drivers BIOS also. But my system showing only 2.99 GB out of 8GB usable RAM. Please help me fix this problem.

    Read the article

  • I bought a motherboard that supports DDR3 RAM

    - by CVertex
    I bought this ASUS Sabertooth X58 motherboard from http://msy.com.au/product.jsp?productId=7301 But I'm not sure what DDR3 RAM to buy. I haven't built a PC from scratch in about 3 years, and I'm wondering the following Do DDR3 ram chips need to be installed in three at a time? Or can I just install one or two now and install more later without any particular pattern? If I buy 2000MHz RAM from Corsair, will that work at 1866 MHz? (which is the highest frequency the motherboard supports) Is it just me or is 1866 RAM not around? Any help is greatly appreciated.

    Read the article

  • HD latency measurement using bonnie++ on different machines with different RAM size

    - by j0nes
    Hello, I have run bonnie++ v1.96 on two different servers without any additional load. One server is a "physical" Dell server with 32GB RAM, the other one is a virtual instance with 14GB RAM. I have read in the bonnie manuals that I should use two times the size of RAM in my bonnie runs, so I used 64GB on the physical machine and 28GB on the virtual machine. Now I want to compare the results, and I am wondering whether the results are comparable at all. The most interesting part is the latency part - on the physical machine, the values are about 10 times higher than on the virtual machine! Can I take these results seriously (e.g. the virtual machine HD is much much faster) or does the different RAM size tamper the results? Thanks! Jonas

    Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >