Search Results

Search found 45590 results on 1824 pages for 'web optimization'.

Page 14/1824 | < Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >

  • Develop web site from existing software or cherry pick and use a web framework?

    - by erisco
    A small team and I are tasked with developing a web site. The client has referenced a particular open source project (we'll call it X) when describing some of the features. Because of this, the team wants to start with X and adapt it to satisfy the client. I have looked at X and its code and, in my opinion, it would be unwise. However, my experience is limited, and could really benefit from the insights of others so that I can figure out what I should be asserting as the right direction for the team. My red flags are going up and this is why. X was developed in the earlier days of PHP; 500 line blocks of code are the norm; global variables are abundant; giant switch cases are the norm for switching between which page is shown. There is no clear mapping between URL and where the code for that page sits. From a feature-set standpoint, X is actually software specialized for a different task and has dozens of features we don't need or have use for that come as core assumptions. We will be unable to adapt X through its plugin system. That said, there are a few features which can be mapped, with some modification, to suit our purposes. I believe this is the attraction the team feels. I would feel comfortable if, instead of using X directly, we lifted what is salvageable and useful to us. We can then use that code, and the same 3rd party libraries X is using, in a new code base built on top of a PHP web framework (particularly Agavi, so you understand what I mean by 'web framework'). The web framework gives us a strong MVC structure and provides the common facilities for web development, or adapters to work with 3rd party libraries that do so. We will also have a clean slate feature-wise to work from, which means we can work additively instead of subtractively. Because the code base is better structured, and contains none of what we don't need, it will be easier to document, which is a critical requirement of our client. So to summarize, the team wants to use X, whereas I want to take the bits we can from X and use a web framework instead. I want to bounce this opinion off of other's experiences so that I can be more informed. Thanks for your insight.

    Read the article

  • Vidéo sur le développement Web avec Dart, le langage orienté Web de Google, par Yohan Beschi

    Yohan Beschi de la société SOAT (http://blog.soat.fr/) vous propose une vidéo sur une introduction au développement Web avec Dart, le langage orienté Web de Google.Au cours de cette vidéo vous verrez :comment Dart permet de développer des applications clientes aussi bien que serveurs ; quelques éléments du langage ; mais aussi les outils permettant un développement industrialisé et une productivité accrue. Le lien de la vidéo : http://soat.developpez.com/videos/da...web-avec-dart/N'hésitez...

    Read the article

  • Fiddler - A useful free tool for checking Web Services (and web site) traffic

    - by TATWORTH
    Recently I had reason to be very glad that I had Fiddler. I was able to record some web service traffic and identify a problem as Fiddler can record both the call to a web service and response from the web service. By seeing the actual data traffic I was able to resolve a problem found in testing in less time than it has taken me to write this blog entry! This tool is also useful for studying general web site traffic. Fiddler is available from http://www.fiddler2.com/fiddler2/ There are training videos available on the above site.

    Read the article

  • Google I/O 2012 - Putting the App Back into Web App - Web Programming with Dart

    Google I/O 2012 - Putting the App Back into Web App - Web Programming with Dart Dan Grove, Vijay Menon Do you want to build blazingly fast applications with beautiful graphics and offline support? Would you like to run those apps anywhere on the open web? Would you like to develop those apps in a language that supports modular large-scale development while keeping the lightweight feel of a scripting language? This session will show you how to use the Dart programming language to develop the next generation of amazing applications for the open web. For all I/O 2012 sessions, go to developers.google.com From: GoogleDevelopers Views: 187 4 ratings Time: 57:16 More in Science & Technology

    Read the article

  • Compute jvm heap size to host web application

    - by Enrique
    Hello, I want to host a web application on a private JVM they offer 32, 64, 128, 256 MB plans. My web application uses Spring. And I store some objects for every logged in user session. My question is: How can I profile my web app to see how much heap size it needs so I can choose a plan?, How can I simulate hundreds of users logged in at the same time? I'm developing the application using Netbeans 6.7 Java 1.6 Tomcat 6.0.18 Thank you.

    Read the article

  • .NET Web Serivce hydrate custom class

    - by row1
    I am consuming an external C# Web Service method which returns a simple calculation result object like this: [Serializable] public class CalculationResult { public string Name { get; set; } public string Unit { get; set; } public decimal? Value { get; set; } } When I add a Web Reference to this service in my ASP .NET project Visual Studio is kind enough to generate a matching class so I can easily consume and work with it. I am using Castle Windsor and I may want to plug in other method of getting a calculation result object, so I want a common class CalculationResult (or ICalculationResult) in my solution which all my objects can work with, this will always match the object returned from the external Web Service 1:1. Is there anyway I can tell my Web Service client to hydrate a particular class instead of its generated one? I would rather not do it manually: foreach(var fromService in calcuationResultsFromService) { ICalculationResult calculationResult = new CalculationResult() { Name = fromService.Name }; yield return calculationResult; } Edit: I am happy to use a Service Reference type instead of the older Web Reference.

    Read the article

  • Alternative Web model

    - by Above The Gods
    One of the problems web apps have against native apps, especially on the mobile front, is the constant need to re-download each web page on request. Ultimately, this leads to slower performance. Why if web apps only download new pages if they're actually needed, not because they're simply requested. For example: perhaps the server can store a web page version in a cookie. Every slight change to the page on the server-side changes the version number. Now instead of the browser requesting a new page each time, why not just check the version number and have the server send the page if they're different? If the page similar, the user can just use a cached page. I'm sure browsers doesn't necessarily have to change to accommodate changes to this, correct?

    Read the article

  • SQL Server 2008 Optimization

    - by hgulyan
    I've learned today, if you append to your query OPTION (MAXDOP 0) your query will run on multiple processors and if it's huge query, query will perform faster. I know general guidelines on query optimizations (using indexes, selecting only needed fields etc.), my question is about SQL Server optimization. Maybe changing some options in configurations or anything else. What guidelines are there for SQL Server Optimization? Thank you.

    Read the article

  • What are some good code optimization methods?

    - by esac
    I would like to understand good code optimization methods and methodology. How do I keep from doing premature optimization if I am thinking about performance already. How do I find the bottlenecks in my code? How do I make sure that over time my program does not become any slower? What are some common performance errors to avoid (e.g.; I know it is bad in some languages to return while inside the catch portion of a try{} catch{} block

    Read the article

  • When building a web Application project, TFS 2008 Builds two spearate projects in the _PublishedFold

    - by Steve Johnson
    Hi all, I am trying to a perform build automation on one of web application projects built using VS 2008. The _PublishedWebSites contains two folders: Web and Deploy. I just want the TFS 2008 to generate only the Deploy Folder and Not the Web Folder. Here is my TFSBuild.proj File <Project ToolsVersion="3.5" DefaultTargets="Compile" xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> <Import Project="$(MSBuildExtensionsPath)\Microsoft\VisualStudio\TeamBuild\Microsoft.TeamFoundation.Build.targets" /> <Import Project="$(MSBuildExtensionsPath)\Microsoft\WebDeployment\v9.0\Microsoft.WebDeployment.targets" /> <ItemGroup> <SolutionToBuild Include="$(BuildProjectFolderPath)/../../Development/Main/MySoftware.sln"> <Targets></Targets> <Properties></Properties> </SolutionToBuild> </ItemGroup> <ItemGroup> <ConfigurationToBuild Include="Release|AnyCPU"> <FlavorToBuild>Release</FlavorToBuild> <PlatformToBuild>Any CPU</PlatformToBuild> </ConfigurationToBuild> </ItemGroup> <!--<ItemGroup> <SolutionToBuild Include="$(BuildProjectFolderPath)/../../Development/Main/MySoftware.sln"> <Targets></Targets> <Properties></Properties> </SolutionToBuild> </ItemGroup> <ItemGroup> <ConfigurationToBuild Include="Release|x64"> <FlavorToBuild>Release</FlavorToBuild> <PlatformToBuild>x64</PlatformToBuild> </ConfigurationToBuild> </ItemGroup>--> <ItemGroup> <AdditionalReferencePath Include="C:\3PR" /> </ItemGroup> <Target Name="GetCopyToOutputDirectoryItems" Outputs="@(AllItemsFullPathWithTargetPath)" DependsOnTargets="AssignTargetPaths;_SplitProjectReferencesByFileExistence"> <!-- Get items from child projects first. --> <MSBuild Projects="@(_MSBuildProjectReferenceExistent)" Targets="GetCopyToOutputDirectoryItems" Properties="%(_MSBuildProjectReferenceExistent.SetConfiguration); %(_MSBuildProjectReferenceExistent.SetPlatform)" Condition="'@(_MSBuildProjectReferenceExistent)'!=''"> <Output TaskParameter="TargetOutputs" ItemName="_AllChildProjectItemsWithTargetPathNotFiltered"/> </MSBuild> <!-- Remove duplicates. --> <RemoveDuplicates Inputs="@(_AllChildProjectItemsWithTargetPathNotFiltered)"> <Output TaskParameter="Filtered" ItemName="_AllChildProjectItemsWithTargetPath"/> </RemoveDuplicates> <!-- Target outputs must be full paths because they will be consumed by a different project. --> <CreateItem Include="@(_AllChildProjectItemsWithTargetPath->'%(FullPath)')" Exclude= "$(BuildProjectFolderPath)/../../Development/Main/Web/Bin*.pdb; *.refresh; *.vshost.exe; *.manifest; *.compiled; $(BuildProjectFolderPath)/../../Development/Main/Web/Auth/MySoftware.dll; $(BuildProjectFolderPath)/../../Development/Main/Web/BinApp_Web_*.dll;" Condition="'%(_AllChildProjectItemsWithTargetPath.CopyToOutputDirectory)'=='Always' or '%(_AllChildProjectItemsWithTargetPath.CopyToOutputDirectory)'=='PreserveNewest'" > <Output TaskParameter="Include" ItemName="AllItemsFullPathWithTargetPath"/> <Output TaskParameter="Include" ItemName="_SourceItemsToCopyToOutputDirectoryAlways" Condition="'%(_AllChildProjectItemsWithTargetPath.CopyToOutputDirectory)'=='Always'"/> <Output TaskParameter="Include" ItemName="_SourceItemsToCopyToOutputDirectory" Condition="'%(_AllChildProjectItemsWithTargetPath.CopyToOutputDirectory)'=='PreserveNewest'"/> </CreateItem> </Target> <!-- To modify your build process, add your task inside one of the targets below and uncomment it. Other similar extension points exist, see Microsoft.WebDeployment.targets. <Target Name="BeforeBuild"> </Target> <Target Name="BeforeMerge"> </Target> <Target Name="AfterMerge"> </Target> <Target Name="AfterBuild"> </Target> --> </Project> I want to build everything that the builtin Deploy project is doing for me. But i dont want the generated Web Project as it conatains App_Web_xxxx.dll assemblies instead of a single compiled assembly. Please help. Thanks

    Read the article

  • Snow Leopard: Optimization

    - by Shyam
    Hi, I have bunch of questions: I have a Mac network, which has five Mac's. Right now, they are individually getting software updates. Is there a way to download the patches/security updates in a single place (repository) and point all machines to this location? Personally, I have tools like Monolingual and Onyx, but are there tools you could recommend that affect the performance of the Operating System positively? Tweaks would be nice. Links and pointers, would be really appreciated. I've read about Time machine, is there a way to backup all machines to a network drive using this tool? Thanks!

    Read the article

  • Bacula optimization/profiling tools

    - by pufferfish
    I'm trying to get an idea of where the bottlenecks are in our backup system. Are there tools available for profiling this? If not, any pointers to a home grown method would also help. I guess most of the info would be in the bacula logs, but I'd also like to see things like what gets saturated during despooling: disk, CPU or network? This feels like a problem most bacula admins would have encountered.

    Read the article

  • my.ini optimization on Windows 2008 R2 VPS

    - by MKphpDev
    I have a vmware VPS running Windows Server 2008 R2 Enterprise that has performance issues with MySQL. Every few minutes, MySQL stall for few seconds then responed to queries. I'm sure that my.ini need to be optimized, but unfortunately, I don't have any idea of my.ini configuration. What's running on the server: 2 small wordpress blogs, 1 vbulletin forums (approx. 1.2 GB database, and increasing), small database for some sort of plug-ins (no more than 4000 records) Server Info: Processor: Intel Xeon X5550 @ 2.67GHz, RAM: 6 GB (memory useage never exceeded 2 GB), MySQL 5.5, PHP 5.3.10, IIS 7 current my.ini: [mysqld] default-storage-engine=INNODB sql-mode="STRICT_TRANS_TABLES,NO_AUTO_CREATE _USER,NO_ENGINE_SUBSTITUTION" max_connections=250 myisam_max_sort_file_size=20G innodb_additional_mem_pool_size=256M innodb_flush_log_at_trx_commit=1 innodb_log_buffer_size=8M innodb_buffer_pool_size=512MB innodb_log_file_size=128M innodb_thread_concurrency=10 key_buffer_size = 512M myisam_sort_buffer_size = 8M join_buffer_size = 256K read_buffer_size = 256K sort_buffer_size = 256K table_cache = 4000 thread_cache_size = 200 wait_timeout = 30 connect_timeout = 10 tmp_table_size = 32M max_allowed_packet = 1M max_connect_errors = 10000 query_cache_size = 16M query_cache_limit = 2M query_cache_type = 1 query_cache_min_res_unit = 1024 query_prealloc_size = 16384 query_alloc_block_size = 16384 skip-external-locking read_rnd_buffer_size=1M max_heap_table_size=16M thread_concurrency=8 [mysqld_safe] open_files_limit = 8192 [mysqldump] quick max_allowed_packet = 16M [myisamchk] key_buffer_size = 128M sort_buffer_size = 128M read_buffer = 2M write_buffer = 2M any help with that, please?

    Read the article

  • Changes to JBoss web.xml have no effect

    - by sixtyfootersdude
    I just added this to my web.xml on my JBOSS server. But it had no effect. I am still allowed to connect to ports that do not use bi-directional certificate exchange. Anyone have an ideas? <!-- Force SSL for entire site as described here: http://wiki.metawerx.net/wiki/ForcingSSLForSectionsOfYourWebsite --> <security-constraint> <!-- defines resources to be protected (in this case everything)--> <web-resource-collection> <!-- name for the resource, can be anything you like --> <!-- Question: is this referenced anywhere else? --> <web-resource-name> Entire Application </web-resource-name> <!-- protect the entire application --> <url-pattern> /* </url-pattern> </web-resource-collection> <!-- defines protection level for protected resource --> <user-data-constraint> <!-- data cannot be observed or changed --> <!-- how it works in tomcat: --> <!-- if (set to integral or confidential && not using ssl) --> <!-- redirect sent to client, redirecting them to same url --> <!-- but using the port defined in the redirect port --> <!-- attribute in the <Connector> element of server.xml --> <!-- default is 443, so in other words user is redirected --> <!-- to same page using ssl. --> <!-- BUT it is differnt for JBOSS!! See this link: http://wiki.metawerx.net/wiki/ForcingSSLForSectionsOfYourWebsite --> <transport-guarantee> CONFIDENTIAL </transport-guarantee> </user-data-constraint> </security-constraint> <login-config> <!-- Client-side SSL certificate based authentication. The cert is passed to the server to authenticate --> <!-- I am pretty sure that CLIENT-CERT should have a dash NOT an underscore see: http://www.mail-archive.com/[email protected]/msg139845.html --> <!-- CLIENT-CERT uses a client's AND server's certificates. See: http://monduke.com/2006/01/19/the-mysterious-client-cert/ --> <auth-method> CLIENT-CERT </auth-method> </login-config> Update Actually it appears that I have made an error in my original posting. The web.xml does block users from connecting to the webservice using http (port C below). However users are still allowed to connect to ports that do not force users to authenticate themselves (port B). I think that users should be able to connect to port A (it has clientAuth="true") but I dont think that people should be able to connect to port B (it has clientAuth="false"). Excerpt from server.xml <Connector port="<A>" ... SSLEnabled="true" ... scheme="https" secure="true" clientAuth="true" keystoreFile="... .keystore" keystorePass="pword" truststoreFile="... .keystore" truststorePass="pword" sslProtocol="TLS"/> <Connector port="<B>" ... SSLEnabled="true" ... scheme="https" secure="true" clientAuth="false" keystoreFile="... .keystore" keystorePass="pword" sslProtocol = "TLS" /> <Connector port="<C>" ... />

    Read the article

  • Asp.net web service: Problems accessing without www

    - by MysterM
    I have a Asp.net web service running on www.domain.com/Service.svc that I connect to using jQuery from my asp.net website. Everything works perfect if the user access my website with www.domain.com. But if the user uses only domain.com I get error: There was no channel actively listening at 'http://domain.com/Service.svc/get?date=2010-10-09'. This is often caused by an incorrect address URI. Ensure that the address to which the message is sent matches an address on which a service is listening. In my web.config I use the serviceHostingEnvironment tag to get the service running on my webhost (it doesn't work otherwise). Maybe this is what causes the error? Here is my system.serviceModel in web.config (I had some problems setting up the web service so that's why my web.config might be a bit messy: <system.serviceModel> <behaviors> <endpointBehaviors> <behavior name="ServiceAspNetAjaxBehavior"> <enableWebScript /> </behavior> </endpointBehaviors> <serviceBehaviors> <behavior name="ServiceBehavior"> <serviceDebug includeExceptionDetailInFaults="true" /> </behavior> </serviceBehaviors> </behaviors> <serviceHostingEnvironment aspNetCompatibilityEnabled="true"> <baseAddressPrefixFilters> <add prefix="http://www.domain.com"/> </baseAddressPrefixFilters> </serviceHostingEnvironment> <services> <service behaviorConfiguration="ServiceBehavior" name="Service"> <endpoint address="" behaviorConfiguration="ServiceAspNetAjaxBehavior" binding="webHttpBinding" bindingConfiguration="ServiceBinding" contract="Service" /> </service> </services> <bindings> <webHttpBinding> <binding name="ServiceBinding" maxBufferPoolSize="1000000" maxReceivedMessageSize="1000000"> <readerQuotas maxDepth="1000000" maxStringContentLength="1000000" maxArrayLength="1000000" maxBytesPerRead="1000000" maxNameTableCharCount="1000000" /> </binding> </webHttpBinding> </bindings> </system.serviceModel> How can I make it possible for my users to access my webservice also when using only domain.com?

    Read the article

  • New Features in ASP.NET Web API 2 - Part I

    - by dwahlin
    I’m a big fan of ASP.NET Web API. It provides a quick yet powerful way to build RESTful HTTP services that can easily be consumed by a variety of clients. While it’s simple to get started using, it has a wealth of features such as filters, formatters, and message handlers that can be used to extend it when needed. In this post I’m going to provide a quick walk-through of some of the key new features in version 2. I’ll focus on some two of my favorite features that are related to routing and HTTP responses and cover additional features in a future post.   Attribute Routing Routing has been a core feature of Web API since it’s initial release and something that’s built into new Web API projects out-of-the-box. However, there are a few scenarios where defining routes can be challenging such as nested routes (more on that in a moment) and any situation where a lot of custom routes have to be defined. For this example, let’s assume that you’d like to define the following nested route:   /customers/1/orders   This type of route would select a customer with an Id of 1 and then return all of their orders. Defining this type of route in the standard WebApiConfig class is certainly possible, but it isn’t the easiest thing to do for people who don’t understand routing well. Here’s an example of how the route shown above could be defined:   public static class WebApiConfig { public static void Register(HttpConfiguration config) { config.Routes.MapHttpRoute( name: "CustomerOrdersApiGet", routeTemplate: "api/customers/{custID}/orders", defaults: new { custID = 0, controller = "Customers", action = "Orders" } ); config.Routes.MapHttpRoute( name: "DefaultApi", routeTemplate: "api/{controller}/{id}", defaults: new { id = RouteParameter.Optional } ); GlobalConfiguration.Configuration.Formatters.Insert(0, new JsonpFormatter()); } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; }   With attribute based routing, defining these types of nested routes is greatly simplified. To get started you first need to make a call to the new MapHttpAttributeRoutes() method in the standard WebApiConfig class (or a custom class that you may have created that defines your routes) as shown next:   public static class WebApiConfig { public static void Register(HttpConfiguration config) { // Allow for attribute based routes config.MapHttpAttributeRoutes(); config.Routes.MapHttpRoute( name: "DefaultApi", routeTemplate: "api/{controller}/{id}", defaults: new { id = RouteParameter.Optional } ); } } Once attribute based routes are configured, you can apply the Route attribute to one or more controller actions. Here’s an example:   [HttpGet] [Route("customers/{custId:int}/orders")] public List<Order> Orders(int custId) { var orders = _Repository.GetOrders(custId); if (orders == null) { throw new HttpResponseException(new HttpResponseMessage(HttpStatusCode.NotFound)); } return orders; }   This example maps the custId route parameter to the custId parameter in the Orders() method and also ensures that the route parameter is typed as an integer. The Orders() method can be called using the following route: /customers/2/orders   While this is extremely easy to use and gets the job done, it doesn’t include the default “api” string on the front of the route that you might be used to seeing. You could add “api” in front of the route and make it “api/customers/{custId:int}/orders” but then you’d have to repeat that across other attribute-based routes as well. To simply this type of task you can add the RoutePrefix attribute above the controller class as shown next so that “api” (or whatever the custom starting point of your route is) is applied to all attribute routes: [RoutePrefix("api")] public class CustomersController : ApiController { [HttpGet] [Route("customers/{custId:int}/orders")] public List<Order> Orders(int custId) { var orders = _Repository.GetOrders(custId); if (orders == null) { throw new HttpResponseException(new HttpResponseMessage(HttpStatusCode.NotFound)); } return orders; } }   There’s much more that you can do with attribute-based routing in ASP.NET. Check out the following post by Mike Wasson for more details.   Returning Responses with IHttpActionResult The first version of Web API provided a way to return custom HttpResponseMessage objects which were pretty easy to use overall. However, Web API 2 now wraps some of the functionality available in version 1 to simplify the process even more. A new interface named IHttpActionResult (similar to ActionResult in ASP.NET MVC) has been introduced which can be used as the return type for Web API controller actions. To return a custom response you can use new helper methods exposed through ApiController such as: Ok NotFound Exception Unauthorized BadRequest Conflict Redirect InvalidModelState Here’s an example of how IHttpActionResult and the helper methods can be used to cleanup code. This is the typical way to return a custom HTTP response in version 1:   public HttpResponseMessage Delete(int id) { var status = _Repository.DeleteCustomer(id); if (status) { return new HttpResponseMessage(HttpStatusCode.OK); } else { throw new HttpResponseException(HttpStatusCode.NotFound); } } With version 2 we can replace HttpResponseMessage with IHttpActionResult and simplify the code quite a bit:   public IHttpActionResult Delete(int id) { var status = _Repository.DeleteCustomer(id); if (status) { //return new HttpResponseMessage(HttpStatusCode.OK); return Ok(); } else { //throw new HttpResponseException(HttpStatusCode.NotFound); return NotFound(); } } You can also cleanup post (insert) operations as well using the helper methods. Here’s a version 1 post action:   public HttpResponseMessage Post([FromBody]Customer cust) { var newCust = _Repository.InsertCustomer(cust); if (newCust != null) { var msg = new HttpResponseMessage(HttpStatusCode.Created); msg.Headers.Location = new Uri(Request.RequestUri + newCust.ID.ToString()); return msg; } else { throw new HttpResponseException(HttpStatusCode.Conflict); } } This is what the code looks like in version 2:   public IHttpActionResult Post([FromBody]Customer cust) { var newCust = _Repository.InsertCustomer(cust); if (newCust != null) { return Created<Customer>(Request.RequestUri + newCust.ID.ToString(), newCust); } else { return Conflict(); } } More details on IHttpActionResult and the different helper methods provided by the ApiController base class can be found here. Conclusion Although there are several additional features available in Web API 2 that I could cover (CORS support for example), this post focused on two of my favorites features. If you have .NET 4.5.1 available then I definitely recommend checking the new features out. Additional articles that cover features in ASP.NET Web API 2 can be found here.

    Read the article

  • Is premature optimization really the root of all evil?

    - by Craig Day
    A colleague of mine today committed a class called ThreadLocalFormat, which basically moved instances of Java Format classes into a thread local, since they are not thread safe and "relatively expensive" to create. I wrote a quick test and calculated that I could create 200,000 instances a second, asked him was he creating that many, to which he answered "nowhere near that many". He's a great programmer and everyone on the team is highly skilled so we have no problem understanding the resulting code, but it was clearly a case of optimizing where there is no real need. He backed the code out at my request. What do you think? Is this a case of "premature optimization" and how bad is it really?

    Read the article

  • Compiler optimization causing the performance to slow down

    - by aJ
    I have one strange problem. I have following piece of code: template<clss index, class policy> inline int CBase<index,policy>::func(const A& test_in, int* srcPtr ,int* dstPtr) { int width = test_in.width(); int height = test_in.height(); double d = 0.0; //here is the problem for(int y = 0; y < height; y++) { //Pointer initializations //multiplication involving y //ex: int z = someBigNumber*y + someOtherBigNumber; for(int x = 0; x < width; x++) { //multiplication involving x //ex: int z = someBigNumber*x + someOtherBigNumber; if(soemCondition) { // floating point calculations } *dstPtr++ = array[*srcPtr++]; } } } The inner loop gets executed nearly 200,000 times and the entire function takes 100 ms for completion. ( profiled using AQTimer) I found an unused variable double d = 0.0; outside the outer loop and removed the same. After this change, suddenly the method is taking 500ms for the same number of executions. ( 5 times slower). This behavior is reproducible in different machines with different processor types. (Core2, dualcore processors). I am using VC6 compiler with optimization level O2. Follwing are the other compiler options used : -MD -O2 -Z7 -GR -GX -G5 -X -GF -EHa I suspected compiler optimizations and removed the compiler optimization /O2. After that function became normal and it is taking 100ms as old code. Could anyone throw some light on this strange behavior? Why compiler optimization should slow down performance when I remove unused variable ? Note: The assembly code (before and after the change) looked same.

    Read the article

  • Advanced tasks using Web.Config transformation

    - by dcadenas
    Does anyone know if there is a way to "transform" specific sections of values instead of replacing the whole value or an attribute? For example, I've got several appSettings entries that specify the Urls for different webservices. These entries are slightly different in the dev environment than the production environment. Some are less trivial than others <!-- DEV ENTRY --> <appSettings> <add key="serviceName1_WebsService_Url" value="http://wsServiceName1.dev.domain.com/v1.2.3.4/entryPoint.asmx" /> <add key="serviceName2_WebsService_Url" value="http://ma1-lab.lab1.domain.com/v1.2.3.4/entryPoint.asmx" /> </appSettings> <!-- PROD ENTRY --> <appSettings> <add key="serviceName1_WebsService_Url" value="http://wsServiceName1.prod.domain.com/v1.2.3.4/entryPoint.asmx" /> <add key="serviceName2_WebsService_Url" value="http://ws.ServiceName2.domain.com/v1.2.3.4/entryPoint.asmx" /> </appSettings> So far, I know I can do something like this in the Web.Release.Config: <add xdt:Locator="Match(key)" xdt:Transform="SetAttributes(value)" key="serviceName1_WebsService_Url" value="http://wsServiceName1.prod.domain.com/v1.2.3.4/entryPoint.asmx" /> <add xdt:Locator="Match(key)" xdt:Transform="SetAttributes(value)" key="serviceName2_WebsService_Url" value="http://ws.ServiceName2.domain.com/v1.2.3.4/entryPoint.asmx" /> However, everytime the Version for that webservice is updated, I would have to update the Web.Release.Config as well, which defeats the purpose of simplfying my web.config updates. I know I could also split that URL into different sections and update them independently, but I rather have it all in one key. I've looked through the available web.config Transforms but nothings seems to be geared towars what I am trying to accomplish. These are the websites I am using as a reference: Vishal Joshi's blog, MSDN Help, and Channel9 video Any help would be much appreciated! -D

    Read the article

  • Threading calls to web service in a web service - (.net 2.0)

    - by Ryan Ternier
    Got a question regarding best practices for doing parallel web service calls, in a web service. Our portal will get a message, split that message into 2 messages, and then do 2 calls to our broker. These need to be on separate threads to lower the timeout. One solution is to do something similar to (pseudo code): XmlNode DNode = GetaGetDemoNodeSomehow(); XmlNode ENode = GetAGetElNodeSomehow(); XmlNode elResponse; XmlNode demResponse; Thread dThread = new Thread(delegate { //Web Service Call GetDemographics d = new GetDemographics(); demResponse = d.HIALRequest(DNode); }); Thread eThread = new Thread(delegate { //Web Service Call GetEligibility ge = new GetEligibility(); elResponse = ge.HIALRequest(ENode); }); dThread.Start(); eThread.Start(); dThread.Join(); eThread.Join(); //combine the resulting XML and return it. //Maybe throw a bit of logging in to make architecture happy Another option we thought of is to create a worker class, and pass it the service information and have it execute. This would allow us to have a bit more control over what is going on, but could add additional overhead. Another option brought up would be 2 asynchronous calls and manage the returns through a loop. When the calls are completed (success or error) the loop picks it up and ends. The portal service will be called about 50,000 times a day. I don't want to gold plate this sucker. I'm looking for something light weight. The services that are being called on the broker do have time out limits set, and are already heavily logged and audited, so I'm not worried on that part. This is .NET 2.0 , and as much as I would love to upgrade I can't right now. So please leave all the goodies of 2.0 out please.

    Read the article

  • Get XML-RPC (Andorid - PHP) web service different params type

    - by Jovan
    Hi, I want to create XML-RPC web service for Andorid (client) - PHP (Server) communication I create XML-RPC PHP web service server using this tutorial: http://articles.sitepoint.com/article/own-web-service-php-xml-rpc/5 For andorid client web service I use this project: http://code.google.com/p/android-xmlrpc/ server and client communication is OK, but I have problem with getting params from andorid client to php server. From andorid client I send two params (first integer and second float number) Object[] params = { 3, 3.6f, }; method.call(params); , but I don't know how to handle this parameters in php server?? in php server there is some function , but with only one param ($news_id): function news_viewNewsItem ( $news_id ) { /* Define the query to fetch the news item */ $query = "SELECT * FROM kd_xmlrpc_news WHERE news_id = '" . $news_id . "'"; $sql = mysql_query ( $query ); if ( $result = mysql_fetch_array ( $sql ) ) { /* Extract the variables for sending in our server response */ $news_item['news_id'] = $result['news_id']; $news_item['date'] = XMLRPC_convert_timestamp_to_iso8601( mysql_datetime_to_timestamp( $result['date'] ) ); $news_item['title'] = $result['title']; $news_item['full_desc'] = $result['full_desc']; $news_item['author'] = $result['author']; /* Respond to the client with the news item */ XMLRPC_response(XMLRPC_prepare($news_item), KD_XMLRPC_USERAGENT); } else { /* If there was an error, respond with a fault code instead */ XMLRPC_error("1", "news_viewNewsItem() error: Unable to read news:" . mysql_error(), KD_XMLRPC_USERAGENT); } } In server.py file there is functions for every method but I dont know how to write in php server: def add(self, x, y): print print "input x=%s, y=%s" % (str(x), str(y)) sum = x + y print "output", sum print return sum Can some one help me with code , and tell me how to handle various types from client to server?? Thanks and Happy New Year

    Read the article

  • my web service works locally but, not when it is deployed

    - by rogdawg
    When I deploy my web service, I get the following error: There is no build provider registered for the extension '.svc'. You can register one in the section in machine.config or web.config. Make sure is has a BuildProviderAppliesToAttribute attribute which includes the value 'Web' or 'All'. I found one thread (http://forums.asp.net/t/1228638.aspx) that suggested a solution but, I can not get it to work. If I make the changes to my web config file as suggested in the thread, I then get a configuration error. One odd thing is that, if I check the machine.config file on my machine, located at C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\CONFIG\machine.config, I don't see any of the config settings described in the thread. As a matter of fact, there is no mention of "compilation" or "buildProviders" at all. The on-line documents I have found regarding BuildProviderAppliesToAttribute have not been of any help. Thanks in advance for any advice you can give. Here is my entire config file listing: <?xml version="1.0"?>

    Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >