Search Results

Search found 25894 results on 1036 pages for 'ask the readers'.

Page 140/1036 | < Previous Page | 136 137 138 139 140 141 142 143 144 145 146 147  | Next Page >

  • Is my computer slow due to lack of swap

    - by Kristian Jensen
    A few months ago, I installed Ubuntu 12.04 alongside with Windows 7 on my Asus EEE-PC 1015bx. It has a tendency of freezing and when trying to investigate I found that a swap partition of only 256 MB had been created. The Asus EEE-PC 1015bx is born with 1 GByte RAM only and it is not possible to add further or exchange the existing 1 GByte with a larger card. When looking at the system monitor, it looks like all swap is being utilized along with 70-75% of the RAM, even with very few applications running. Can the lack of much swap space be the reason for my computer running slowly and at times freezing? How can I add a swap partition? Or should I add a swap file instead? At the moment, I see two partitions when viewing the system monitor: one 28.6 GByte ext4 partition which must be the one containing Ubuntu and one 100 GByte fuseblk partition which I assume is the one holding Windows. It shows that I have 18.6 GByte free space on the ext4 partition. Can I "take a bite" from the ext4 partition and convert this into a swap partition? I was thinking something like 3 GBytes for swap considering my limited RAM. I hope that someone can guide me through. Thank you. 20th Oct 2012 - Further details Thank you for below answer which I find very useful. I am certainly considering switching to one of your suggested shells as I can see from the Internet that many have posted that these require much fewer resources than ubuntu. It seems to me that lubuntu is the perfect match for my very limited computer. I will have to wait a few days, though, as I am presently limited by a very slow and restricted Internet connection via satellite. But will lubuntu install as simply another shell replacing unity or will it replace ubuntu all together? Will the software that I have installed under ubuntu still be accessible in lubuntu? And can I return to ubuntu if required? Regarding the actual question of swap: When I run gparted, it shows me that there is one ntfs partition of 100 GBytes from where it boots and the before mentioned ext4 partition of 28.6 GBytes is not mentioned. Could it be that my ubuntu installation resides inside this 100 GBytes ntfs partiotion? And if so, can I take a bite of this for my swap partition? Realising that gparted is shown in Danish, I hope that you can make out what I mean. System monitoring shows below details: Once again I sincerely hope that you can help. Thank you.

    Read the article

  • Root filesystem check fails after power failure during installation

    - by Oo Nwoye
    During the "install" phase of the upgrade there was a power failure. After when starting up again the following errors are reported: init: udevtrigger main process (420) terminated with status 1 init: udevtrigger post-stop process (428) terminated with status 1 init: udevmonitor main process (419) killed by TERM signal The disk drive for / is not ready yet or not present Continue to wait; or press S to skip mounting or M for manual recovery Pressing M gives me the following message: Root filesystem check failed. A maintenance shell will now be started. CONTROL-D will terminate this shell and reboot the system.

    Read the article

  • Installation Error, "Unable to lock the administration directory"

    - by kern
    Whenever I try to install any software through Terminal or Software on my Ubuntu 11.04, I'm getting this response: In Terminal: E: Could not get lock /var/lib/dpkg/lock - open (11: Resource temporarily unavailable) E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it? In Software Center An unhandlable error occured There seems to be a programming error in aptdaemon, the software that allows you to install/remove software and to perform other package management related tasks. What should I do?

    Read the article

  • ldap client cannot contact ldap server

    - by Van
    I have followed these instructions: https://help.ubuntu.com/12.04/serverguide/openldap-server.html#openldap-auth-config The ldap server works fine. I can log into it using an ldap account. However, I configured another Ubuntu 12.04 server as a ldap client for authentication but I cannot contact the server. Here is the error: On the client: # ldapsearch -Q -LLL -Y EXTERNAL -H ldapi://ldap01.domain.local -b cn=config dn ldap_sasl_interactive_bind_s: Can't contact LDAP server (-1) The server can receive requests: On the client: # telnet ldap01.domain.local 389 Trying 10.3.17.10... Connected to sisn01.domain.local. Escape character is '^]'. On the client: # ldapsearch -x -h ldap01.domain.local -b cn=config dn # extended LDIF # # LDAPv3 # base <cn=config> with scope subtree # filter: (objectclass=*) # requesting: dn # # search result search: 2 result: 32 No such object # numResponses: 1 On the server: # ps aux | grep slapd openldap 3759 0.0 0.2 564820 8228 ? Ssl 08:39 0:00 /usr/sbin/slapd -h ldap:/// ldapi:/// -g openldap -u openldap -F /etc/ldap/slapd.d I suspect I am missing a configuration parameter either on the server or on the client. I just cannot figure out what. Any help here would be appreciated.

    Read the article

  • Are there any plans to create a standard based on libunity?

    - by Sebastian Billaudelle
    In the last few month and maybe even years, Ubuntu and Canonical often were criticised for developing software and desktop components without talking to other groups in the free software community. I don't want to comment on this topic, but I see problems arising with creating a "proprietary" solution for displaying indicators and progressbars with a launcher like Unity. In the world of free and open Desktop Environments we often try to standardize parts and libraries or write specifications to increase collaboration between different desktops. We have the instrument of http://freedesktop.org and a lot of specifications are getting implemented by the major Desktop Environments. In this context, proposing a standard for those indicators would be a great step towards better interoperability between desktops. These indicators represent a great feature on the Linux Desktop and I'm sure that other projects like AWN, Docky, etc. would pick them up. With the great market share of Ubuntu, Canonical is in a position to propose it as a standard and encourage projects to implement it. Thank you in advance, Sebastian Billaudelle

    Read the article

  • 11.10 suddenly became 2d

    - by Sergey Kravchenya
    After today's update ubuntu became 2d despite the fact that I logged in under "ubuntu" not "ubuntu 2d". Also some other issues appeared (e.g. my shortcuts rolled back, num pad doesn't work, caps lock key don't have any effect on case, when I'm typing in dash - it doubles every letter - 'n' -- 'nn' ) Here is update log: Setting up google-chrome-stable (17.0.963.83-r127885) ... Setting up libavutil51 (4:0.8.1-1~ppa1) ... Setting up libpostproc52 (4:0.8.1-1~ppa1) ... Setting up libswscale2 (4:0.8.1-1~ppa1) ... Setting up libavcodec53 (4:0.8.1-1~ppa1) ... Setting up libavformat53 (4:0.8.1-1~ppa1) ... Setting up libbluray1 (1:0.2.2-1~ppa1) ... Setting up libmp3lame0 (3.99.5+repack1-3~ppa1) ... Setting up libx264-120 (2:0.120.2171+git01f7a33-3~ppa1) ... Setting up libxvidcore4 (2:1.3.2-9~ppa1) ... Setting up thunderbird (11.0+build1-0ubuntu0.11.10.1) ... Installing new version of config file /etc/apport/blacklist.d/thunderbird ... Setting up thunderbird-globalmenu (11.0+build1-0ubuntu0.11.10.1) ... Setting up thunderbird-gnome-support (11.0+build1-0ubuntu0.11.10.1) ... Setting up thunderbird-locale-en (1:11.0+build1-0ubuntu0.11.10.1) ... Setting up thunderbird-locale-en-gb (1:11.0+build1-0ubuntu0.11.10.1) ... Setting up thunderbird-locale-en-us (1:11.0+build1-0ubuntu0.11.10.1) ... Setting up thunderbird-locale-ru (1:11.0+build1-0ubuntu0.11.10.1) ... Setting up ubuntu-tweak (0.6.2-1~oneiric1) ... Setting up xul-ext-calendar-timezones (1.3+build1-0ubuntu0.11.10.1) ... Setting up xul-ext-lightning (1.3+build1-0ubuntu0.11.10.1) ... Setting up xul-ext-gdata-provider (1.3+build1-0ubuntu0.11.10.1) ... What can I do to find what cause of this problem? What additional information should I provide to help you help me?

    Read the article

  • How do I compile lbflow 1.1?

    - by Ali.A
    After using "sh ./configure" command, I encountered another error during lbflow package installation (a scientific one). The sequence of operations is here with error: ./configure --disable-gts sudo make [sudo] password for alireza: make all-recursive make[1]: Entering directory `/home/alireza/lbflow-1.1' Making all in src make[2]: Entering directory `/home/alireza/lbflow-1.1/src' source='lbflow.cpp' object='lbflow-lbflow.o' libtool=no \ DEPDIR=.deps depmode=none /bin/bash ../depcomp \ g++ -DHAVE_CONFIG_H -I. -I. -I.. -c -o lbflow-lbflow.o `test -f 'lbflow.cpp' || echo './'`lbflow.cpp **../depcomp: line 432: exec: g++: not found** **make[2]: *** [lbflow-lbflow.o] Error 127 make[2]: Leaving directory `/home/alireza/lbflow-1.1/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/alireza/lbflow-1.1' make: *** [all] Error 2** Do you have any idea to troubleshoot this problem? (And please notice that i have installed both g++ and gcc. it says g++: not found, but i have installed g++ from Ubuntu Software Center!)

    Read the article

  • Connecting 2 ubuntu machines as a LAN

    - by Brendan Cutjar
    Hi i am trying to connect 2 ubuntu computers as a LAN. In my current setup I have: One machine running ubuntu 11.10 with Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller While the other machine is running Ubuntu 12.04 with an Atheros Communications Inc AR8152 v1.1 Fast Ethernet The two machines are connected via a switch (Edimax ES-3205P). Unfortunately I still cannot connect the two machines together. Can somebody please show me what to do and how to go about solving this issue? Thank you ANSWERED All I had to do was set up both ip's maually, subnet mask to 255.255.255.0 and left blank both gateway and DNS.

    Read the article

  • Skipping video and audio with PS3MediaServer

    - by MaxMackie
    I'm using the latest PS3MediaServer build right from the repos suggested in the Ubuntu Wiki. I'm streaming multiple movies from my server (Ubuntu 10.04 LTS) to my PS3 over wireless. Sometimes, during some movies, the audio and the video will begin skipping. This can last anywhere between 5 and 30 seconds before it goes back to normal. I have a four core i5 processor and 8GB of DDR3 RAM so I don't think my computer is having a hard time keeping up with the transcoding. So this leads me to believe it's either sub-optimal transcoding options from within PS3MS or my network can't handle the heat. Other than the out-of-box configuration, is there any way I can tweak the settings for the application to use my resources more efficiently?

    Read the article

  • UEFI Dual-Boot - Ubuntu 12.04.3 + Windows 8.1 (One GPT HDD)

    - by swafbrother
    UEFI Dual-Boot - Ubuntu 12.04.3 + Windows 8.1 (One GPT HDD) Hello, I'm having trouble setting up a dual-boot (Ubuntu 12.04 LTS and Windows 8.1) in my ASUS K55VM laptop's hard drive disk (500 GB). I was mostly following tutorials for doing this, but at some point something has gone wrong. Up to now, I have followed these steps: I formatted my HDD into GPT. I clean-installed Windows 8.1. I didn't prevent Windows from choosing the partitions to use and it created these partitions: A Recovery partition (sda1). An EFI System Partition (sda2). A Microsoft Reserved Partition (sda3). A Windows Data Partition or C drive (sda4). I reduced the Windows Data Partition via Windows' Disk Management. I made a bootable USB Stick with Ubuntu 12.04 LTS from ISO, using Universal USB Installer. I created these partitions for Ubuntu: A Boot partition, mounted at /boot (sda5). A Root partition, mounted at / (sda6). A Swap partition (sda7). In Device for boot loader installation I chose: /dev/sda. Then, when I rebooted, it went straight into Ubuntu. So I installed Boot-Repair, and clicked on Recommended Repair. It automatically did its job without asking for anything. I rebooted and Grub showed up, with a lot of options. At this point I had a decent dual-boot setup; Ubuntu and both Windows entries worked fine: Ubuntu. Windows Boot UEFI Loader. Windows UEFI bkpbootmgfw.efi. I executed this command: sudo grub-install --force /dev/sda5. Then I tried to make Windows 8.1's Boot Manager the main boot manager, so that I could choose which OS to boot into from a menu. I downloaded EasyBCD on Windows. It showed 2 Ubuntu entries and 1 Windows entry. I went into BCD Deployment tab and clicked on Write MBR. At this point, I went into BIOS and made Windows Boot Manager the first boot option. When I rebooted, I got a black screen with the message efidisk read error, and then (I guess) it switched to the next boot option, which is Ubuntu, resulting in Grub showing up. From Grub, Ubuntu entry is working and so are both Windows entries. If I choose Ubuntu, it normally boots into Ubuntu. But if I choose Windows, it goes into Windows' boot manager. In Windows' boot manager, a menu shows up: Ubuntu. Ubuntu. Windows 8.1. If I choose Windows, it boots into Windows without any problem. If I choose Ubuntu, it boots into Grub (back to step 14). Here's my BootInfo Summary: http://paste.ubuntu.com/6698171/ Windows Boot Manager is clearly not working as expected; I can't directly boot into it and I can't boot into it from BIOS either (efidisk read error again). If I want to boot into Windows I need to boot into Grub first, which is the opposite of what I wanted. I need help at this point. What is the best thing I can do? Is there a more reliable and/or simpler way of acomplishing a satisfying dual-boot for this situation? Can someone provide a way for going back to step 8, where I had a more efficient dual-boot setup? If only I could undo what I did with Easy BCD and skip Windows' Boot Menu... Can someone provide a way to fix this mess? Thanks in advance and sorry for the length of this, I wanted to be exhaustive.

    Read the article

  • Can't add to panel nor delete panel

    - by david
    Hello everybody! I cannot add any applet to any (top or bottom) panel, cannot delete any panel nor create a new panel. When I right-click on the panel the only options available are: Properties, Help or About panels. [I cannot post an image because of spam prevention, so I'll do my best] I can see when I right-click (bold means clickable): Add to panel Properties Delete this panel New panel Help About Panels Trying to solve this I did what is usually suggested: gconftool-2 –-recursive-unset /apps/panel # might be optional rm -rf ~/.gconf/apps/panel pkill gnome-panel but I only got a nice empty panel (no Applications Places System, no clock, no shutdown button...) to which I couldn't add any applet, so I decided to take the default profiles in .gconf and .gconfd from a live CD and overwrite mines. Now we are back to the beginning. I also have tried to lock completely the panel (with both gconf-editor and pessulus) and later unlock it completely but it didn't work. Here is the system information: $ lsb_release Distributor ID: Ubuntu Description: Ubuntu 10.04.2 LTS Release: 10.04 Codename: lucid Thank you very much.

    Read the article

  • SPDIF Input not working

    - by BiggJJ
    One of my motherboard has two SPDIF sockets. One input and one output. Under windows these work fine and I am able to achieve what I'm trying here. I want to set Ubuntu up so it will play the Digital input out the Analogue output(normal headphone jack). Under my input devices there is no digital options, and under configuration there is no option for Digital Stereo input I only have options for Digital output and Analogue input, when really I want it the other way around. Can anyone shed any light? error when starting gnome-alsamixer:

    Read the article

  • Synaptic: Requires installation of untrusted packages

    - by user170556
    I am completely new to the forums and almost completely new to Linux. I am running Chrubuntu on an Acer C7 and I've been having trouble installing anything in the Ubuntu Software Center. Based on some advice in another thread I tried to install Synaptic, which seems like it does the same thing except it actually works, but I get the same error message with that as I have with every other program I've tried installing. This is all I get under the details: libept1.4.12 librarian0 rarian-compat synaptic Any help with some simple step by step instructions on how to fix this, and will Synaptic basically be able to replace the Software Center? Thanks a lot.

    Read the article

  • Why did Ubuntu suddenly get so slow?

    - by user101383
    12.10 has been slowing down mysteriously. Normally, in past versions, I can log in, open Firefox, and it will pop up within seconds. 12.10 is like that upon install too, though once I install my old apps, it gets very slow by Ubuntu standards. After login the hard drive will just make noise for a while before the OS will do anything. Hardware: enter description: Desktop Computer product: XPS 8300 () vendor: Dell Inc. serial: B6G2WR1 width: 64 bits capabilities: smbios-2.6 dmi-2.6 vsyscall32 configuration: boot=normal chassis=desktop uuid=44454C4C-3600-1047-8032-C2C04F575231 core description: Motherboard product: 0Y2MRG vendor: Dell Inc. physical id: 0 version: A00 serial: ..CN7360419G04VQ. slot: To Be Filled By O.E.M. *cpu description: CPU product: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz serial: To Be Filled By O.E.M. slot: CPU 1 size: 1600MHz capacity: 1600MHz width: 64 bits clock: 100MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: cores=4 enabledcores=1 threads=2 *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 256KiB capacity: 256KiB capabilities: internal write-through unified *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 1MiB capacity: 1MiB capabilities: internal write-through unified *-cache:2 DISABLED description: L3 cache physical id: 7 slot: L3-Cache size: 8MiB capacity: 8MiB capabilities: internal write-back unified *-memory description: System Memory physical id: 20 slot: System board or motherboard size: 8GiB *-bank:0 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NF-CG vendor: Nanya physical id: 0 serial: 7228183 slot: DIMM3 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NF-CG vendor: Nanya physical id: 1 serial: 1E28183 slot: DIMM1 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:2 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NF-CG vendor: Nanya physical id: 2 serial: 9E28183 slot: DIMM4 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:3 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NF-CG vendor: Nanya physical id: 3 serial: 5527183 slot: DIMM2 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-firmware description: BIOS vendor: Dell Inc. physical id: 0 version: A05 date: 09/21/2011 size: 64KiB capacity: 4032KiB capabilities: mca pci upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb zipboot biosbootspecification *-pci description: Host bridge product: 2nd Generation Core Processor Family DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 09 width: 32 bits clock: 33MHz *-pci:0 description: PCI bridge product: Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port vendor: Intel Corporation physical id: 1 bus info: pci@0000:00:01.0 version: 09 width: 32 bits clock: 33MHz capabilities: pci pm msi pciexpress normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:e000(size=4096) memory:fe600000-fe6fffff ioport:d0000000(size=268435456) *-display description: VGA compatible controller product: Juniper [Radeon HD 5700 Series] vendor: Advanced Micro Devices [AMD] nee ATI physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=radeon latency=0 resources: irq:44 memory:d0000000-dfffffff memory:fe620000-fe63ffff ioport:e000(size=256) memory:fe600000-fe61ffff *-multimedia description: Audio device product: Juniper HDMI Audio [Radeon HD 5700 Series] vendor: Advanced Micro Devices [AMD] nee ATI physical id: 0.1 bus info: pci@0000:01:00.1 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:48 memory:fe640000-fe643fff *-communication description: Communication controller product: 6 Series/C200 Series Chipset Family MEI Controller #1 vendor: Intel Corporation physical id: 16 bus info: pci@0000:00:16.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: driver=mei latency=0 resources: irq:45 memory:fe708000-fe70800f *-usb:0 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 vendor: Intel Corporation physical id: 1a bus info: pci@0000:00:1a.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:16 memory:fe707000-fe7073ff *-multimedia description: Audio device product: 6 Series/C200 Series Chipset Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 05 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:46 memory:fe700000-fe703fff *-pci:1 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:41 memory:fe500000-fe5fffff *-network description: Network controller product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=bcma-pci-bridge latency=0 resources: irq:16 memory:fe500000-fe503fff *-pci:2 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 4 vendor: Intel Corporation physical id: 1c.3 bus info: pci@0000:00:1c.3 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:42 memory:fe400000-fe4fffff *-network description: Ethernet interface product: NetLink BCM57788 Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 01 serial: 18:03:73:e1:a7:71 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.123 duplex=full firmware=sb ip=192.168.1.3 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:47 memory:fe400000-fe40ffff *-usb:1 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:fe706000-fe7063ff *-isa description: ISA bridge product: H67 Express Chipset Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 05 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: SATA controller product: 6 Series/C200 Series Chipset Family SATA AHCI Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 version: 05 width: 32 bits clock: 66MHz capabilities: storage msi pm ahci_1.0 bus_master cap_list configuration: driver=ahci latency=0 resources: irq:43 ioport:f070(size=8) ioport:f060(size=4) ioport:f050(size=8) ioport:f040(size=4) ioport:f020(size=32) memory:fe705000-fe7057ff *-serial UNCLAIMED description: SMBus product: 6 Series/C200 Series Chipset Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 05 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:fe704000-fe7040ff ioport:f000(size=32) *-scsi:0 physical id: 1 logical name: scsi0 capabilities: emulated *-disk description: ATA Disk product: Hitachi HUA72201 vendor: Hitachi physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: JP4O serial: JPW9J0HD21BTZC size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 sectorsize=512 signature=000641dc *-volume:0 description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: / version: 1.0 serial: 4e3d91b7-fd38-4f44-a9e9-ba3c39b926ec size: 585GiB capacity: 585GiB capabilities: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2012-10-21 16:26:50 filesystem=ext4 lastmountpoint=/ modified=2012-10-29 18:12:08 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2012-10-29 18:12:08 state=mounted *-volume:1 description: Extended partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 size: 7823MiB capacity: 7823MiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 7823MiB capabilities: nofs *-volume:2 description: Windows NTFS volume physical id: 3 bus info: scsi@0:0.0.0,3 logical name: /dev/sda3 version: 3.1 serial: 84a92aae-347b-7940-a2d1-f4745b885ef2 size: 337GiB capacity: 337GiB capabilities: primary bootable ntfs initialized configuration: clustersize=4096 created=2012-10-21 18:43:39 filesystem=ntfs modified_by_chkdsk=true mounted_on_nt4=true resize_log_file=true state=dirty upgrade_on_mount=true *-scsi:1 physical id: 2 logical name: scsi1 capabilities: emulated *-cdrom description: DVD-RAM writer product: DVDRWBD DH-12E3S vendor: PLDS physical id: 0.0.0 bus info: scsi@1:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/sr0 version: MD11 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-scsi:2 physical id: 3 bus info: usb@2:1.8 logical name: scsi6 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk:0 description: SCSI Disk physical id: 0.0.0 bus info: scsi@6:0.0.0 logical name: /dev/sdb configuration: sectorsize=512 *-disk:1 description: SCSI Disk physical id: 0.0.1 bus info: scsi@6:0.0.1 logical name: /dev/sdc configuration: sectorsize=512 *-disk:2 description: SCSI Disk physical id: 0.0.2 bus info: scsi@6:0.0.2 logical name: /dev/sdd configuration: sectorsize=512 *-disk:3 description: SCSI Disk product: MS/MS-Pro vendor: Generic- physical id: 0.0.3 bus info: scsi@6:0.0.3 logical name: /dev/sde version: 1.03 serial: 3 capabilities: removable configuration: sectorsize=512 *-medium physical id: 0 logical name: /dev/sde

    Read the article

  • Apt-get update through tor

    - by Alexander
    I'm trying to update my apt-get list. In my country a lot of sites are blocked or have been blocked from companies. When I use a proxy for the whole system I get errors, tor works perfectly when browsing. My question is can I update apt-get through a connection from tor? I mean I want to unblock the blocked sites using tor connection so I can perform "apt-get update" without errors ... Thanks in advance. Edit BTW : I'm using Ubuntu 13.10 and Tor 0.2.21 alexander@Alexander-PC:~$ sudo apt-get update [sudo] password for alexander: Ign http://extras.ubuntu.com saucy InRelease Ign http://security.ubuntu.com saucy-security InRelease Ign http://us.archive.ubuntu.com saucy InRelease Hit http://extras.ubuntu.com saucy Release.gpg Get:1 http://dl.google.com stable InRelease [1,540 B] 100% [1 InRelease gpgv 1,540 B] [Waiting for headers] [Waiting for headers] [WaSplitting up/var/lib/apt/lists/partial/dl.google.com_linux_chrome_deb_dists_stabIgn http://dl.google.com stable InRelease E: GPG error: http://dl.google.com stable InRelease: Clearsigned file isn't valid, got 'NODATA' (does the network require authentication?

    Read the article

  • Grub doesn't show both Ubuntu installations

    - by jackweirdy
    I have a laptop with Ubuntu 12.04 LTS installed as the main OS. The other day I installed Ubuntu-Studio (version 12.04) into another partition on the machine. The installation went great and when the machine booted, the grub menu popped up and I could see the option for Ubuntu Studio and the vanilla Ubuntu OS'. The problem was that this version of grub, installed by the Studio installer, didn't look great and insisted on putting Studio at the top of the list, and therefore as the main OS to boot. I use the standard Ubuntu more often, so I booted into that and ran sudo grub-install dev/sda. That worked OK and now Ubuntu boots as normal. Only problem is that the Grub menu doesn't show up and doesn't give me a chance to choose the other OS. Running sudo os-prober shows that it can find ubuntu studio, it doesn't give me a chance to boot it. Any ideas as to how I can fix this problem? Cheers in advance. EDIT: followed instructions here and saw the boot menu, but the only boot options present were for the standard installation of Ubuntu.

    Read the article

  • How to make Xbox joypad work with Bastion?

    - by Alistair Buxton
    I have an XBox joypad: Bus 005 Device 004: ID 045e:0289 Microsoft Corp. Xbox Controller S When I start Bastion from the terminal the following is output: Number of joysticks: 1 Number of buttons for joystick: 0 - 10 Number of axes for joystick: 0 - 6 Number of PovHats for joystick: 0 - 1 When I load up the game it displays a message "press any key" and at this point, if I press a button on the joypad it advances to the main menu. However, the up/down/left/right controls do not work and the button will not operate the menu. When I enter the control configuration, the joypad section is disabled and displays a message "joypad not detected." If I enter the control customization and try to reconfigure one of the controls, noises can be heard when pressing joypad buttons, but the input is otherwise ignored. Further information which may or may not be relevant: My controller is an original Xbox controller, not a 360 controller. XNA games on Windows apparently only work with Xbox360 controllers because they use xinput rather than direct input, see eg here. My controller works (almost) properly with MonoGame trunk samples, but Bastion uses a modified MonoGame and crashes when run against trunk, so I can't add debugging to see where the problem is. Bug can also be reproduced with a Xbox 360 wired controller.

    Read the article

  • Cannot reinstall MySql in 11.10 - ERROR: There's not enough space in /var/lib/mysql/

    - by Robin McCain
    I've tried it all (removing all the packages associated with MySQL) but keep getting stuff like this: Preconfiguring packages ... (Reading database ... 142196 files and directories currently installed.) Unpacking mysql-server-5.1 (from .../mysql-server-5.1_5.1.63-0ubuntu0.11.10.1_amd64.deb) ... ERROR: There's not enough space in /var/lib/mysql/ dpkg: error processing /var/cache/apt/archives/mysql-server-5.1_5.1.63-0ubuntu0.11.10.1_amd64.deb (--unpack): subprocess new pre-installation script returned error exit status 1 Errors were encountered while processing: /var/cache/apt/archives/mysql-server-5.1_5.1.63-0ubuntu0.11.10.1_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) Here is my drive space map. root@kyle:/# df Filesystem 1K-blocks Used Available Use% Mounted on /dev/mapper/kyle-root 59361428 59021768 0 100% / udev 1014052 8 1014044 1% /dev tmpfs 409304 1476 407828 1% /run none 5120 0 5120 0% /run/lock none 1023256 0 1023256 0% /run/shm /dev/sda1 233191 46888 173862 22% /boot /dev/md0 1922858288 1048513192 776669500 58% /media/array The root volume actually only has about 10 gigabytes in use on the hard drive (which has a 60 gig partition). /dev/md0 is a 2 TB raid array.

    Read the article

  • Blue people on flash videos (Youtube, Vimeo, etc...)

    - by Luis Alvarado
    After a recent update I am seeing EVERYONE in any video blue. Only the people are blue. First I was thinking it was an April Fools joke about the song Blue from Eiffel 65 but it has been 4 days already. I tested on another 2 PCs, same problem. It started about a week ago I think. I am using Flash 11.2.202.228 with Firefox 11. The problem is not there if I use Google Chrome. In Chrome the Flash Player is 11.2.31.118

    Read the article

  • Microsoft Ergonomic 7000 keyboard + mouse lag

    - by user115210
    I recently bought a new Microsoft Ergonomic 7000 keyboard. I started to use it with my Ubuntu 12.04 and it lags all the time. I try to be more specific: Even on a minor CPU usage the mouse lags. By minor I mean firefox loading a webpage, or opening an application like conky, gnome-terminal etc. When higher CPU usage occurs the keyboard is lagging too, but by this I mean it misses my hits, so what I type won't appear later. What I tried so far (and did not work)? Disable autosuspend (echo -1 to sys/bus/usb.../autosuspend) and at the same place set level to "on". I have tried several video drivers: Vesa, radeon, newest catalyst (and catalyst beta too) When my keyboard and/or mouse lags I tried an other USB keyboard which works perfectly and the same for the mouse. I tried the keyboard and mouse on a different computer with Linux (Ubuntu, Arch, OpenSuse) too, the same problem appears but not on Windows. I tried to replace the battery sets, and to change channel on the dongle. And also tried to use the dongle from other USB ports. On the same time I am able to use any other wireless mouse. I changed the XkbModel to "microsoft7000" but it did not solve anything. About the hardware: AMD A8 3870K - Radeon HD6550D 8 GB of memory 4 GB of swap (which is almost never used) Here are my PC's details: lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 002: ID 045e:071d Microsoft Corp. Bus 005 Device 002: ID 0461:4ea7 Primax Electronics, Ltd lspci: 00:00.0 Host bridge: Advanced Micro Devices [AMD] Family 12h Processor Root Complex 00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI BeaverCreek [Radeon HD 6550D] 00:11.0 SATA controller: Advanced Micro Devices [AMD] Hudson SATA Controller [IDE mode] (rev 40) 00:12.0 USB controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 11) 00:12.2 USB controller: Advanced Micro Devices [AMD] Hudson USB EHCI Controller (rev 11) 00:13.0 USB controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 11) 00:13.2 USB controller: Advanced Micro Devices [AMD] Hudson USB EHCI Controller (rev 11) 00:14.0 SMBus: Advanced Micro Devices [AMD] Hudson SMBus Controller (rev 13) 00:14.1 IDE interface: Advanced Micro Devices [AMD] Hudson IDE Controller 00:14.2 Audio device: Advanced Micro Devices [AMD] Hudson Azalia Controller (rev 01) 00:14.3 ISA bridge: Advanced Micro Devices [AMD] Hudson LPC Bridge (rev 11) 00:14.4 PCI bridge: Advanced Micro Devices [AMD] Hudson PCI Bridge (rev 40) 00:14.5 USB controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 11) 00:15.0 PCI bridge: Advanced Micro Devices [AMD] Device 43a0 00:15.1 PCI bridge: Advanced Micro Devices [AMD] Device 43a1 00:16.0 USB controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 11) 00:16.2 USB controller: Advanced Micro Devices [AMD] Hudson USB EHCI Controller (rev 11) 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 0 (rev 43) 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 1 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 2 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 3 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 4 00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 6 00:18.6 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 5 00:18.7 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 7 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) dmesg | tail -n 150: http://pastebin.com/sGUAAiUe cat /var/log/Xorg.0.log: http://pastebin.com/fny7ZkN4 Note: The Icon7 Twister Evolution is the replacement mouse to use.

    Read the article

  • Is the GT430/GT520 enough for 1080p flash?

    - by oshirowanen
    UPDATE 1: It seems that the gt520 is better at hd flash decoding that the gt430. Does anyone know if the gt520 is able to play 1080p video smoothly and if it can have 2 monitors connected to it at the same time for a larger desktop? ORIGINAL: Now that flash 10.3 is out for ubuntu which apparently has hardware acceleration, I just wanted to know if the gt430 graphics card would be enough to play 1080p flash files directly from the browser smoothly?

    Read the article

  • GParted doesn't see any partition

    - by Diego
    What I am trying to do couldn't be more logical I think. I have a 40gb drive with two partitions, Xp and Ubuntu. I have dual boot, everything boots and works perfectly. I have about 9gb free in the Windows partition When I run Gparted I only see 40gb unallocated space, booting from Gparted Live CD. What the hell is going on ? I've read everywhere this is a common problem, however it has no sense something like this remains unsolved by gparted developers, considering what I am trying to do is the very basic step anybody wanting to migrate from Windows to Linux would od Something like this honestly doesn't give anything else than frustration Could anybody on this forum be so kind to explain whats' going on ? Thanks

    Read the article

  • 10.10 irritating updater message

    - by Ashu
    As you all know 10.10 support has ended. thus whenever i start the update manager i get a dialog box saying Your Ubuntu release is not supported anymore You will not get any further security fixes or critical updates. Please upgrade to a later version of Ubuntu Linux. any way to remove this? that is really bugging me. ps. updating to a newer version is not an option now the screenshot

    Read the article

  • How do you limit root partition disk access to allow drive to go into stanby mode?

    - by Casey
    When there are no users on my system, I would like the hard disk to spindown to low-power state. I realize that this might not be 100% achievable for a straight 24 hours, but it seems reasonable that the system could remain idle for a few hours at a time when it is not in use. My system is headless and running a limited number of services. The primary services are: exim4, mythtv-backend, nfs, samba, cups, apt-cacher-ng Assume that drives are already enabled to go into standby mode. Also, its not acceptable to increase the write-back timeout, since my system is not on a UPS.

    Read the article

  • What packages do I need to compile .tex documents using XeLaTeX?

    - by maria
    Hi I'm aware of the existence of similar threads on this forum. But any of replies mach to my problem. I'm using Ubuntu 10.4 and I hadn't problems with fonts till I've decided to use XeLaTeX instead of LaTeX (cf http://tex.stackexchange.com/questions/12347/typesetting-a-document-using-arabic-script/12358#12358). The problem is that I'm not able to compile any .tex document using XeLaTeX, as well as properly display XeLaTeX documentation. As I've learn thanks to mentioned thread, XeLaTeX uses the fonts availables in general in the system. I was trying yo read fontspec documentation, but it opens in pdf with a lot of white gaps and terminal output (quite long) consist mostly of errors. This are just few lines of it: Error: Missing language pack for 'Adobe-Japan1' mapping Error: Unknown font tag 'F5.1' Error (24124): No font in show Error: Unknown font tag 'F5.1' I was trying to compile simple XeLaTeX file: \documentclass{article} \usepackage{fontspec} \setmainfont{Linux Libertine O} \begin{document} Hello World! \end{document} without succes. This is terminal output of compilation: This is XeTeX, Version 3.1415926-2.2-0.9995.2 (TeX Live 2009/Debian) restricted \write18 enabled. entering extended mode (./ex.tex LaTeX2e <2009/09/24> Babel <v3.8l> and hyphenation patterns for english, usenglishmax, dumylang, noh yphenation, polish, loaded. (/usr/share/texmf-texlive/tex/latex/base/article.cls Document Class: article 2007/10/19 v1.4h Standard LaTeX document class (/usr/share/texmf-texlive/tex/latex/base/size10.clo)) (/usr/share/texmf-texlive/tex/xelatex/fontspec/fontspec.sty (/usr/share/texmf-texlive/tex/generic/ifxetex/ifxetex.sty) (/usr/share/texmf-texlive/tex/latex/tools/calc.sty) (/usr/share/texmf-texlive/tex/latex/xkeyval/xkeyval.sty (/usr/share/texmf-texlive/tex/generic/xkeyval/xkeyval.tex (/usr/share/texmf-texlive/tex/generic/xkeyval/keyval.tex))) (/usr/share/texmf-texlive/tex/latex/base/fontenc.sty (/usr/share/texmf-texlive/tex/xelatex/euenc/eu1enc.def) (/usr/share/texmf-texlive/tex/xelatex/euenc/eu1lmr.fd)) fontspec.cfg loaded. (/usr/share/texmf-texlive/tex/xelatex/fontspec/fontspec.cfg))kpathsea: Invalid fontname `Linux Libertine O', contains ' ' ! Font \zf@basefont="Linux Libertine O" at 10.0pt not loadable: Metric (TFM) fi le or installed font not found. \zf@fontspec ...ntname \zf@suffix " at \f@size pt \unless \ifzf@icu \zf@set@... l.3 \setmainfont{Linux Libertine O} ? I can't find Linux Libertine O. Searching for otf- by aptitude gives as result: maria@maria-laptop:/etc/fonts$ aptitude search otf p emdebian-rootfs - emdebian root filesystem support p libotf-bin - A Library for handling OpenType Font - utilities p libotf-dev - A Library for handling OpenType Font - development i libotf0 - A Library for handling OpenType Font - runtime p libotf0-dbg - The libotf libraries and debugging symbols p libpam-dotfile - A PAM module which allows users to have more than one password p livecd-rootfs - construction script for the livecd rootfs p makebootfat - Utility to create a bootable FAT filesystem p otf-ipaexfont - Japanese OpenType font, IPAexFont (IPAexGothic/Mincho) p otf-ipaexfont-gothic - Japanese OpenType font, IPAexFont (IPAexGothic) p otf-ipaexfont-mincho - Japanese OpenType font, IPAexFont (IPAexMincho) p otf-ipafont - Japanese OpenType font set, IPAfont p otf-ipafont-gothic - Japanese OpenType font set, IPA Gothic font p otf-ipafont-mincho - Japanese OpenType font set, IPA Mincho font p otf-stix - the Scientific and Technical Information eXchange fonts p otf-thai-tlwg - Thai fonts in OpenType format p otf-yozvox-yozfont - Japanese proportional Handwriting OpenType font p otf2bdf - generate BDF bitmap fonts from OpenType outline fonts p robotfindskitten - Zen Simulation of robot finding kitten So font in question is not just uninstalled, but not available, if I'm not wrong. Does it mean that I lack some repositoires? I was trying also to apply solution from the thread How do I reinstall default fonts?, but the result is: maria@maria-laptop:~$ sudo apt-get install msttcorefonts [sudo] password for maria: Reading package lists... Done Building dependency tree Reading state information... Done Note, selecting ttf-mscorefonts-installer instead of msttcorefonts ttf-mscorefonts-installer is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. maria@maria-laptop:~$ It seems that is not a usual problem for use of XeLaTeX; nobody in the mentioned thread suggested instalation of anything else than TeX Live. Thanks in advance

    Read the article

< Previous Page | 136 137 138 139 140 141 142 143 144 145 146 147  | Next Page >