Search Results

Search found 4670 results on 187 pages for 'jvm arguments'.

Page 140/187 | < Previous Page | 136 137 138 139 140 141 142 143 144 145 146 147  | Next Page >

• Fedora 9 not reconizing hard drive

  - by Andrew Jones

  I am installing Fedora 9 to a PC (specifications at the bottom) and have had a lot of trouble with it recognising the hard drive. To get the Fedora installer to recognize it in the first place I had to pass "ata_generic.all_generic_ide=1 pci=nomsi" to the kernel, after which it installed OK. However, now when I boot the installed OS, I get a "could not find filesystem '/dev/root'" error. I tried passing the same arguments to the kernel at boot as I did when installing but to no avail. I have tried using the default LVM layout and defining manual ones but it made no difference. There is no option in the BIOS to enable AHCI or anything like that, in fact the BIOS is very limited in most respects. I can get into the system by using the installation CD in rescue mode (with those extra kernal parameters) but I'm not sure what to do once in there... Unfortunately using a more recent version of Fedora or even another Linux distribution altogether isn't an option becuase of outside constraints - which is annoying since I know for a fact Ubuntu works fine on this setup. I have not been using Linux that long, so treat me like an idiot - I am one. Any help would be greatly appreciated, thanks! System spec: Intel Atom Z530 CPU @ 1.6 GHz Intel US15W chipset 1 GB DDR2 160 GB SATA harddisk (Samsung HM16HI) 1000 Mbit/s Ethernet port Phoenix BIOS

  Read the article

• Windows 7 BSOD Crashes

  - by Shane Andrade

  I recently upgraded to Windows 7 64 doing a clean install from Vista 64 and ever since I keep getting random blue screen crashes. I have the feeling it's caused by my video card but everything has the most up-to-date drivers for Windows 7 64 bit. Here is the memory dump from my most recent crash: MEMORY_MANAGEMENT (1a) # Any other values for parameter 1 must be individually examined. Arguments: Arg1: 0000000000041790, The subtype of the bugcheck. Arg2: fffffa8001990b90 Arg3: 000000000000ffff Arg4: 0000000000000000 Debugging Details: ------------------ PEB is paged out (Peb.Ldr = 000007ff`fffd9018). Type ".hh dbgerr001" for details PEB is paged out (Peb.Ldr = 000007ff`fffd9018). Type ".hh dbgerr001" for details BUGCHECK_STR: 0x1a_41790 DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT PROCESS_NAME: csrss.exe CURRENT_IRQL: 0 LAST_CONTROL_TRANSFER: from fffff80002cff26e to fffff80002c8cf00 STACK_TEXT: fffff880`0299ae38 fffff800`02cff26e : 00000000`0000001a 00000000`00041790 fffffa80`01990b90 00000000`0000ffff : nt!KeBugCheckEx fffff880`0299ae40 fffff800`02cc05d9 : fffffa80`00000000 00000000`01e73fff 00000000`00000000 fffff960`0023653f : nt! ?? ::FNODOBFM::`string'+0x339d6 fffff880`0299b000 fffff800`02fa2e50 : fffffa80`09140c90 0007ffff`00000000 00000000`00000000 00000000`00000000 : nt!MiRemoveMappedView+0xd9 fffff880`0299b120 fffff960`002e381b : fffff900`00000000 fffffa80`07c85d10 00000000`00000001 fffff900`c1e56cd0 : nt!MiUnmapViewOfSection+0x1b0 fffff880`0299b1e0 fffff960`002b4fc1 : 00000000`00000000 fffff900`00000000 fffff900`c1e56cd0 00000000`00000000 : win32k!SURFACE::bUnMapImmediate+0x5b fffff880`0299b210 fffff960`002b527b : fffff900`c07fdd10 fffff8a0`00000000 00000000`00000000 00000000`00000000 : win32k!bMigrateSurfaceForConversion+0x5ad fffff880`0299b340 fffff960`002dc3e3 : fffff900`00000000 fffff900`c1e5c010 00000000`00000000 00000000`00000000 : win32k!pConvertDfbSurfaceToDibInternal+0x1cb fffff880`0299b420 fffff960`002b5319 : fffffa80`07c7f470 00000000`00000001 00000000`00000000 00000000`00000282 : win32k!MulConvertChildRedirectionDfbSurfaceToDib+0x53 fffff880`0299b460 fffff960`002b1267 : fffff900`c0132010 fffff900`c0132010 00000000`00000000 00000000`00000000 : win32k!pConvertDfbSurfaceToDib+0x41 fffff880`0299b490 fffff960`002b1b1f : fffff900`c0132010 00000000`00000001 fffff900`c24cc280 fffff900`c0132010 : win32k!bDynamicRemoveAllDriverRealizations+0x4f fffff880`0299b4c0 fffff960`00273bb9 : 00000000`00000000 fffff900`00000000 fffff900`00000000 00000000`00000000 : win32k!bDynamicModeChange+0x1d7 fffff880`0299b5a0 fffff960`000baa2d : 00000000`00000000 00000000`00000000 00000000`00000000 07cd8220`00000003 : win32k!DrvInternalChangeDisplaySettings+0xc7d fffff880`0299b7e0 fffff960`001a2c41 : 00000000`00000040 fffff900`c00bf010 00000000`00000000 07cd8220`00000003 : win32k!DrvChangeDisplaySettings+0x62d fffff880`0299b9c0 fffff960`001a2e9e : fffffa80`07cd8220 00000000`00000000 00000000`00000000 fffff800`02f6fec3 : win32k!xxxInternalUserChangeDisplaySettings+0x329 fffff880`0299ba80 fffff960`001a033a : 00000000`00000000 00000000`00000000 00998b21`81a100b6 00000000`00000040 : win32k!xxxUserChangeDisplaySettings+0x92 fffff880`0299bb70 fffff960`001a053a : 00000000`00000000 00000000`00000001 00000000`00000000 00000000`00000000 : win32k!xxxRemoteSetDisconnectDisplayMode+0x42 fffff880`0299bbb0 fffff960`00183ea6 : 00000000`00000000 fffffa80`06efeb60 fffff880`0299bca0 00000000`00000005 : win32k!xxxRemoteDisconnect+0x1c2 fffff880`0299bbf0 fffff800`02c8c153 : fffffa80`06efeb60 00000000`00000005 00000000`00000020 00000000`00000000 : win32k!NtUserCallNoParam+0x36 fffff880`0299bc20 000007fe`fd6b3d3a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13 00000000`027cf798 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x7fe`fd6b3d3a STACK_COMMAND: kb FOLLOWUP_IP: win32k!SURFACE::bUnMapImmediate+5b fffff960`002e381b f6477401 test byte ptr [rdi+74h],1 SYMBOL_STACK_INDEX: 4 SYMBOL_NAME: win32k!SURFACE::bUnMapImmediate+5b FOLLOWUP_NAME: MachineOwner MODULE_NAME: win32k IMAGE_NAME: win32k.sys DEBUG_FLR_IMAGE_TIMESTAMP: 4a5bc5e0 FAILURE_BUCKET_ID: X64_0x1a_41790_win32k!SURFACE::bUnMapImmediate+5b BUCKET_ID: X64_0x1a_41790_win32k!SURFACE::bUnMapImmediate+5b Followup: MachineOwner

  Read the article

• Hidden exceptions

  - by user12617285

  Occasionally you may find yourself in a Java application environment where exceptions in your code are being caught by the application framework and either silently swallowed or converted into a generic exception. Either way, the potentially useful details of your original exception are inaccessible. Wouldn't it be nice if there was a VM option that showed the stack trace for every exception thrown, whether or not it's caught? In fact, HotSpot includes such an option: -XX:+TraceExceptions. However, this option is only available in a debug build of HotSpot (search globals.hpp for TraceExceptions). And based on a quick skim of the HotSpot source code, this option only prints the exception class and message. A more useful capability would be to have the complete stack trace printed as well as the code location catching the exception. This is what the various TraceException* options in in Maxine do (and more). That said, there is a way to achieve a limited version of the same thing with a stock standard JVM. It involves the use of the -Xbootclasspath/p non-standard option. The trick is to modify the source of java.lang.Exception by inserting the following: private static final boolean logging = System.getProperty("TraceExceptions") != null; private void log() { if (logging && sun.misc.VM.isBooted()) { printStackTrace(); } } Then every constructor simply needs to be modified to call log() just before returning: public Exception(String message) { super(message); log(); } public Exception(String message, Throwable cause) { super(message, cause); log(); } // etc... You now need to compile the modified Exception.java source and prepend the resulting class to the boot class path as well as add -DTraceExceptions to your java command line. Here's a console session showing these steps: % mkdir boot % javac -d boot Exception.java % java -DTraceExceptions -Xbootclasspath/p:boot -cp com.oracle.max.vm/bin test.output.HelloWorld java.util.zip.ZipException: error in opening zip file at java.util.zip.ZipFile.open(Native Method) at java.util.zip.ZipFile.(ZipFile.java:127) at java.util.jar.JarFile.(JarFile.java:135) at java.util.jar.JarFile.(JarFile.java:72) at sun.misc.URLClassPath$JarLoader.getJarFile(URLClassPath.java:646) at sun.misc.URLClassPath$JarLoader.access$600(URLClassPath.java:540) at sun.misc.URLClassPath$JarLoader$1.run(URLClassPath.java:607) at java.security.AccessController.doPrivileged(Native Method) at sun.misc.URLClassPath$JarLoader.ensureOpen(URLClassPath.java:599) at sun.misc.URLClassPath$JarLoader.(URLClassPath.java:583) at sun.misc.URLClassPath$3.run(URLClassPath.java:333) at java.security.AccessController.doPrivileged(Native Method) at sun.misc.URLClassPath.getLoader(URLClassPath.java:322) at sun.misc.URLClassPath.getLoader(URLClassPath.java:299) at sun.misc.URLClassPath.getResource(URLClassPath.java:168) at java.net.URLClassLoader$1.run(URLClassLoader.java:194) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:190) at sun.misc.Launcher$ExtClassLoader.findClass(Launcher.java:229) at java.lang.ClassLoader.loadClass(ClassLoader.java:306) at java.lang.ClassLoader.loadClass(ClassLoader.java:295) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301) at java.lang.ClassLoader.loadClass(ClassLoader.java:247) java.security.PrivilegedActionException at java.security.AccessController.doPrivileged(Native Method) at sun.misc.URLClassPath$JarLoader.ensureOpen(URLClassPath.java:599) at sun.misc.URLClassPath$JarLoader.(URLClassPath.java:583) at sun.misc.URLClassPath$3.run(URLClassPath.java:333) at java.security.AccessController.doPrivileged(Native Method) at sun.misc.URLClassPath.getLoader(URLClassPath.java:322) ... It's worth pointing out that this is not as useful as direct VM support for tracing exceptions. It has (at least) the following limitations: The trace is shown for every exception, whether it is thrown or not. It only applies to subclasses of java.lang.Exception as there appears to be bootstrap issues when the modification is applied to Throwable.java. It does not show you where the exception was caught. It involves overriding a class in rt.jar, something should never be done in a non-development environment.

  Read the article

• Rebinding Keys on a Dell Keyboard

  - by Maarx

  I have a Dell Multimedia Keyboard, similar to this one: It has many non-standard keys, like the small circular ones across the top, and the "Multimedia" keys above INSERT/HOME/PAGE_UP. They can be rebound through simple registry entries. Some sample ones are included below: [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey] [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey\15] "ShellExecute"="C:\\Program Files (x86)\\Mozilla Firefox\\firefox.exe http://mail.google.com/mail/#inbox" [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey\16] "Association"=".cda" [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey\17] "ShellExecute"="C:\\Windows\\System32\\SnippingTool.exe" [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey\18] "ShellExecute"="calc.exe" [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey\7] "Association"="http" I've rebound the "MAIL" key to, instead of booting Outlook, to booting Firefox directed at my G-Mail account. I've rebound the button that would normally open "MY COMPUTER" to instead boot the Windows 7 "Snipping Tool", something I find very useful. Now, I'm looking to do some other things that I don't already know how to do. Note that answering this question doesn't necessarily require any knowledge about the keyboard or rebinding the keys: I can add, for any given key, a "ShellExecute" entry, and it will simply execute the following command as if it was typed at a Command Prompt. (I'm aware I dumbed that down rather significantly, but bear with me. I'm not really a Windows guy myself.) I use the volume knob for it's intended purpose, to change volume. I would like to change, however, a different key, to "reset" the Windows volume level back to exactly 50%, or, as it refers to it, "50", on it's 0-100 scale. I'm looking for the "program" (what I would type at a command prompt? these are still just Sys32 programs in the PATH, aren't they?) that, I imagine, would take arguments, to change Sound/Volume settings under Windows 7. Perhaps, for clarification, something that might take the form "C: SetVolume -slevel 50" or something.

  Read the article

• running automated fsck on remote server

  - by GriffinHeart

  I had another question about df, and now i came to conclusion i need to run fsck my partition, i've been reading about it and would like some advice, if possible. The situation is like this, no physical access to the server and i want to run fsck. from what i read i just need to touch /forcefsck and when i reboot it will run fsck. My question is, at its basis, with what arguments will the fsck run? Will it need user input to correct errors, etc? and after running will it save a log of what happened? if this was how it ran it would be perfect, anyway of enforcing that on reboot? fsck -v -p /machine/disk/p1 2>&1 > fscklog.txt Also here they describe this: it's also a good idea on debian and debian-derivatives like ubuntu to edit /etc/default/rcS on remote servers and set "FSCKFIX=yes" that adds "-y" to the boot time fsck, so it doesn't risk the remote server being stuck waiting for someone to login at the console and run fsck. But on Centos that doesn't seem to exist I only have ssh access at the moment so that is why i'm being so picky with it. here's some info about disks and mounted volumes on the server: http://pastebin.centos.org/33314 Thanks.

  Read the article

• Windows Task Scheduler fails on EventData instruction

  - by Pete

  The Scheduled Task fails on the Event Data instruction in this XML: <ValueQueries> <Value name="eventChannel">Event/System/Channel</Value> <Value name="eventRecordID">Event/System/EventRecordID</Value> <Value name="eventData">Event/EventData/Data</Value> </ValueQueries> The other 2 fields can be passed as arguments and the EventData syntax matches other websites, so I don't know why it's failing. This is the Event Viewer XML: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Aptify.ExceptionManagerPublishedException" /> <EventID Qualifiers="0">0</EventID> <Level>2</Level> <Task>0</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2013-11-07T19:39:14.000000000Z" /> <EventRecordID>97555</EventRecordID> <Channel>Application</Channel> <Computer>[Computer Name]</Computer> <Security /> </System> <EventData> <Data>General Information ********************************************* Additional Info: ExceptionManager.MachineName: [Computer Name] ExceptionManager.TimeStamp: 11/7/2013 12:39:14 PM ExceptionManager.FullName: AptifyExceptionManagement, Version=4.0.0.0, Culture=neutral, PublicKeyToken=[key] ExceptionManager.AppDomainName: Aptify Shell.exe ExceptionManager.ThreadIdentity: ExceptionManager.WindowsIdentity: ACA_DOMAIN\pbassett 1) Exception Information ********************************************* Exception Type: Aptify.Framework.BusinessLogic.GenericEntity.AptifyGenericEntityValidationException Entity: Tasks ErrorString: Task Type "Make Contact" is not active. MachineName: [machine] CreatedDateTime: 11/7/2013 12:39:14 PM AppDomainName: Aptify Shell.exe ThreadIdentityName: WindowsIdentityName: [identity] Severity: 0 ErrorNumber: 0 Message: Task Type "Make Contact" is not active. Data: System.Collections.ListDictionaryInternal TargetSite: Boolean Save(Boolean, System.String ByRef, Sys tem.String) HelpLink: NULL Source: AptifyGenericEntity StackTrace Information ********************************************* at Aptify.Framework.BusinessLogic.GenericEntity.AptifyGenericEntity.Save(Boolean AllowGUI, String& ErrorString, String TransactionID)</Data> </EventData> </Event>

  Read the article

• Installing Eclipse for OSB Development

  - by James Taylor

  OSB provides 2 methods for OSB development, the OSB console, and Eclipse. This post deals with a typical development environment with OSB installed on a remote server and the developer requiring an IDE on their PC for development. As at 11.1.1.4 Eclipse is only IDE supported for OSB development. We are hoping OSB will support JDeveloper in the future. To get the download for Eclipse use the download WebLogic Server with the Oracle Enterprise Pack for Eclipse, e.g. wls1034_oepe111161_win32.exe.To ensure the Eclipse version is compatible with your OSB version I recommend using the Eclipse that comes with the supported WLS server, e.g. OSB 11.1.1.4 you would install WLS 10.3.4+oepe.The install is a 2 step process, install the base Eclipse, then install the OSB plugins. In this example I'm using the 11.1.1.4 install for windows, your versions may differ. You need to download 2 programs, WebLogic Server with the oepe plugin for your OS, and the Oracle Service Bus which is generally generic. Place these files in a directory of your choice. Start the executable I create a new Oracle Home for this installation as it don't want to impact on my JDeveloper install or any other Oracle products installed on my machine. Ignore the support / email notifications Choose a custom install as we only want to install the minimum for Eclipse. If you really want you can do a typical and install everything. Deselect all products then select the Oracle Enterprise Pack for Eclipse. This will select the minimum prerequisites required for install. As I'm only going to use this home for OSB Development I deselect the JRockit JVM. Accept the locations for the installs. If running on a Windows environment you will be asked to start a Node Manger service. This is optional. I have chosen to ignore. Select the user permissions you require, I have set to default. Do a last check to see if the values are correct and continue to install. The install should start. The install should complete successfully. I chose not to run the Quick Start. Extract the OSB download to a location of your choice and double click on the setup.exe. You may be asked to supply a correct java location. Point this to the java installed in your OS. I'm running Windows 7 so I used the 64bit version. Skip the software updates. Set the OSB home to the location of the WLS home installed above Choose a custom install as all we want to install is the OSB Eclipse Plugins. Select OSB IDE. For the rest of the install screens accept the defaults. Start the install There is no need to configure a WLS domain if you only intend to deploy to the remote server. If you need to do this there are other sites how to configure via the configuration wizard. Start Eclipse to make sure the OSB Plugin has been created. In the top right drop down you should see OSB as an option. Connecting to the remote server, select the Server Tab at the bottom Right-click in that frame and select Server. Chose the remote server version and the hostname Provide and name for your server if necessary, and accept the defaults Enter connection details for the remote server Click on the Remote server and it should validate stating its status.Now you ready to develop, Happy developing!

  Read the article

• PsExec and Remote Environment Variables, Logging, Etc.

  - by alharaka

  When I run PsExec on a remote computer, I always fall short of what I want. What I would like ideally in most situations is a) a log on an admin server where each individual log has the name of each the remote computer it was generated from (e.g. COMPNAME1.log, COMPNAME2.log, etc.) or b) a log file on each remote computer with whatever name I specify. When I try scenario (a), I use the following command. %SystemDrive%\path\to\psexec.exe @listofcomputers.txt -u DOMAIN\username cmd /c echo TEST >> \\server.company.tld\share\%computername%.log Problem is that it never works. All the computers just write to the log where %computername% is just the computer I execute PsExec from in my office. What I want are unique logs for each computer specific in the listofcomputers.txt that will correctly use the hostname from the remote environment variable without issue. Is that even possible? It does not seem to work for me. I tried this, and the syntax is clearly wrong. %SystemDrive%\path\to\psexec.exe @listofcomputers.txt -u DOMAIN\username "cmd /c echo TEST >> \\server.company.tld\share\%computername%.log" PsExec just fails saying the system file cannot be found (read: syntax fail). As for scenario (b), it appears to be a variation of a similar problem. When I run a command like this, it does not work. %SystemDrive%\path\to\psexec.exe @listofcomputers.txt -u DOMAIN\username "cmd /c echo %computername% >> \\server.company.tld\share\aggregated.log" Is there something I do not understand about remote path and environment variables with PsExec on the cmd.exe console (I have not even tried the dreaded PowerShell yet). I know such things work in a batch file (cmd /c \\server.company.tld\share\runthis.bat), but is there a reason it will not work when executing commands as arguments? I always need this, and can never get it!

  Read the article

• Syntax Error when setting up Domain Alias

  - by Poundtrader

  I'm attempting to set up a domain alias via Pre VirtualHost Include and I'm recieving the following error: Error: An error occurred while running: /usr/local/apache/bin/httpd -DSSL -t -f /usr/local/apache/conf/httpd.conf Exit signal was: 0 Exit value was: 1 Output was: --- Syntax error on line 15 of /usr/local/apache/conf/includes/pre_virtualhost_global.conf: CustomLog takes two or three arguments, a file name, a custom log format string or format name, and an optional "env=" clause (see docs) --- Basically I have two domains, the main domain has an opencart installation within a directory (/buy) and I'm attempting to use the multi-store function which allows you to administer multiple stores on multiple domains via the one opencart dashboard. My issue is that I have the opencart installations within the /buy directory so I have been given the following code which should allow me to use this functionality over the multiple cPanel accounts within the same VPS. <VirtualHost 87.117.239.29:80> ServerName newdomain.co.uk ServerAlias www.newdomain.co.uk Alias /buy /home/originaldomain/public_html/buy/ DocumentRoot /home/newdom/public_html ServerAdmin [email protected] ## User newdom # Needed for Cpanel::ApacheConf <IfModule mod_suphp.c> suPHP_UserGroup newdom newdom </IfModule> <IfModule mod_ruid2.c> RUidGid newdom newdom </IfModule> CustomLog /usr/local/apache/domlogs/newdomain.co.uk-bytes_log “%{%s}t %I .\n%{%s}t %O .” CustomLog /usr/local/apache/domlogs/newdomain.co.uk combined ScriptAlias /cgi-bin/ /home/newdom/public_html/cgi-bin/ </VirtualHost> Does anyone know how to get this code to work? Thanks,

  Read the article

• Java in Flux: Utopia or Deuteranopia?

  - by Tori Wieldt

  What a difference a year makes, indeed. Steve Harris, Senior VP, App Server Dev, Oracle and Adam Messinger, VP, Fusion Middleware Group, Oracle presented an informative keynote at the TheServerSide Java Symposium today. With a title "Java in Flux: Utopia or Deuteranopia?" you know things are going to be interesting (see Aeon Flux if you don't get the title reference).What a YearThey started with a little background, explaining that the reactions to Oracle's acquisition of Sun (and therefore Java) one year ago varied greatly, from "Freak Out!" to "Don't Panic." From the Oracle perspective, being the steward of and key contributor to Java requires a lot of sausage making.  They admitted to Oracle's fair share of Homer Simpson-esque "D'oh" moments in the past year, which was complicated by Oracle's communication style.   "Oracle has a tradition has a saying a few things and sticking by then, in contrast to Sun who was much more open," Adam explained. "We laid out the Java roadmap and are executing on it, and we hope that speaks to our commitment."Java SEAdam talked about having a long term perspective on the Java language (20+ years), letting ideas mature in more experimental languages, then bringing them into Java. Current priorities include: JVM convergence (getting the best features of JRockit into Hotspot); support of parallel/multi-core programming, and of course, all the improvements in JDK7. The JDK7 Developer Preview is underway (please download now and report bugs!). The Oracle development team is also working on Lambda and modularity (Jigsaw) for SE 8. Less certain, but also under discussion are improvements for Java SE 9. Adam is thinking of it as a "back to basics" release. He mentioned reworking JNI, improving data integration and improved device support.Java EE To provide context about Java EE, Steve said Java EE was great at getting businesses on the internet. The success of Java EE resulted in an incredible expansion of the middleware marketplace for developers and vendors.  But with success, came more. Java EE kept piling on capabilities, but that created excess baggage.  Doing simple things was no longer so simple. That's where Java community is so valuable: "When Java EE was too complex and heavyweight, many people were happy to tell us what we were doing wrong and popularize solutions," Steve explained. Because of that feedback, the Java EE teams focused on making things simple again: POJOs and annotations, and leveraging changes in Java SE.  Steve said that "innovation doesn't happen in expert groups, it happens on the ground where developers are solving problems," and platform stewards need to pay attention and take advantage of changes that are taking place.Enter the Cloud "Developers are restless, they want cloud functionality from their own IT dept" Steve explained. With the cloud, the scope of problem has expanded to include the data center itself, with multiple tenants. To move forward, existing APIs in Java EE need to be updated to be tenant-aware, service-enabled, and EE needs to support various styles of deployment. The goal is to get all that done in Java EE 8.Adam questioned Steve about timing and schedule. "Yes, the schedule is aggressive, but it'll work" Steve said. Then Adam asked about modularization. If Java SE 8 comes out at the end of 2012, when can Java EE deliver modularization? Steve suggested that key stakeholders can come with up some pre-SE 8 agreement on how to expose the metadata about modules. He then alluded to Mark Reinhold and John Duimovich's keynote at EclipseCON next week. Stay tuned.Evil Master PlanIn conclusion, Adam finally admitted to Oracle's Evil Master Plan: 1) Invest in and improve Java SE and EE 2) Collaborate with the community 3) Broaden the marketplace for Java development. Bwaaaaaaaaahahaha! <rubs hands together>Key LinksJDK7 Developer Preview  http://jdk7.java.net/preview/Oracle Technology Network http://www.oracle.com/technetwork/java/index.htmlTheServerSide Java Symposium  http://javasymposium.techtarget.com/"Utopia or Deuteranopia?" http://en.wikipedia.org/wiki/Aeon_Flux

  Read the article

• Java 6 Certified with Forms and Reports 10g for EBS 12

  - by John Abraham

  Java 6 is now certified with Oracle Application Server 10g Forms and Reports with Oracle E-Business Suite Release 12 (12.0.6, 12.1.1 and higher). What? Wasn't this already certified? No, but a little background might be useful in understanding why this is a new announcement. We previously certified the use of Java 6 with E-Business Suite Release 12 -- with the sole exception of Oracle Application Server 10g components in the E-Business Suite technology stack. Oracle Application Server 10g originally included Java 1.4.2 as part of its distribution.  E-Business Suite 12 uses, amongst other things, the Oracle Forms and Reports 10g components running on Java 1.4. Java 1.4 in the Oracle Application Server 10g ORACLE_HOME is used exclusively by AS 10g Forms and Reports' for Java functionality.  This version of Java is separate from the Java distribution used by other parts of EBS such as Oracle Containers for Java (OC4J). What's new about this certification? You can now upgrade the older Java 1.4 libraries used by Oracle Forms & Reports 10g to Java 6. This allows you to upgrade the Java releases within the Oracle Application Server 10g ORACLE_HOME to the the same level as the rest of your E-Business Suite technology stack components. Why upgrade? This becomes particularly important for customers as individual vendors' support lifecycle for Java 1.4 reaches End of Life: Oracle's Sun JDK Release 1.4.2's End of Extended Support: February 2013 (Sustaining Support indefinitely after) IBM SDK and JRE 1.4.2's End of Service: September 2013 HP-UX Java 1.4.2's End-of-Life : May 2012 Along with Oracle Forms, Java lies at the heart of the Oracle E-Business Suite.  Small improvements in Java can have significant effects on the performance and stability of the E-Business Suite.  As a notable side-benefit, later versions of Java have improved built-in and third-party tools for JVM performance monitoring and tuning.Our standing recommendation is that you always stay current with the latest available Java update provided by your operating system vendor.  Don't forget to upgrade Forms & Reports to 10.1.2.3 E-Business Suite 12 originally shipped with Oracle Application Server 10g Forms & Reports 10.1.2.0.2.  That version is no longer eligible for Error Correction Support. New Forms and Reports 10g patches are now being released with Forms and Reports 10.1.2.3 as the prerequisite. Forms and Reports 10.1.2.3 was certified for EBS 12 environments in November 2008. If you haven't upgraded your EBS 12 environment to Forms & Reports 10.1.2.3, this is a good opportunity to do so. References Using Latest Update of Java 6.0 with Oracle E-Business Suite Release 12 (My Oracle Support Document 455492.1) Overview of Using Java with Oracle E-Business Suite Release 12 (My Oracle Support Document 418664.1) Oracle Lifetime Support Policy (Oracle Fusion Middleware) IBM Developer Kit Lifecycle Dates HP-UX Java - End of Life Policy & Release Naming Terminology Related Articles OracleAS 10g Forms and Reports 10.1.2.3 Certified With EBS R12 Java 6 Certified with E-Business Suite Release 12

  Read the article

• What could be causing SVCHost to leak handles?

  - by Goz

  I have a problem that has been causing me all sorts of grief recently. SVCHost appears to be leaking resources all over the shop. This is the SVCHost run with the arguments "-k netsvcs". At the moment it is sitting at around 5,700 Handles being used. Before I rebooted the machine it was sitting at around 33,000 handles! This higher number has been causing me large problems as my software, thus, fails to obtain the handles it needs (The software tries to create around 2000 handles). I'm totally at a loss as to what is going wrong. IF anyone could help me stop this happening it would be much appreciated. I'm running on XP with SP3. Edit: I tracked this problem down to the WMI system. I'm not sure why or how the problem was occurring. Basically I used "sc change" to move it into its own process and suddenly everything seems to be fine. I'm not entirely sure what is going on ...

  Read the article

• In GNU Screen, Recalled bash history command displays one character position to the left of actual location

  - by vergueishon

  I am running Red Hat 5 32-bit (2.6.18-194.26.1.el5). The issue is that when I recall any previous command in bash's history, the first character in the command is displayed immediately after the shell prompt, without any intervening space, likeso: \[me@mymachine tmp]$man mysql If I enter a Ctrl-C, and retype the command, it looks likeso: \[me@mymachine tmp]$ man mysql This makes recalling a command and editing it before re-entering a real pain. Basically, if I try to edit a recalled command, my changes occur one character position to the left (I believe) of what I see on the screen. It's a bit tedious to describe, and appears to only happen with commands with a large number of arguments. UPDATE: The contents of /etc/sysconfig/bash-prompt-screen, 1 #!/bin/bash 2 echo -n $'\033'"_${USER}@${HOSTNAME%%.*}:${PWD/#$HOME/~}"$'\033\\\\' and the contents of /etc/bashrc, 24 screen) 25 if [ -e /etc/sysconfig/bash-prompt-screen ]; then 26 PROMPT_COMMAND=/etc/sysconfig/bash-prompt-screen 27 else 28 PROMPT_COMMAND='echo -ne "\033_${USER}@${HOSTNAME%%.*}:${PWD/#$HOME/~}"; echo -ne "\033\\"' 29 fi 30 ;; I've disable bash-prompt-screen by renaming it--this fixed it. It's entirely possible that there is a fix to the bash-prompt-screen prompt line in the latest version of screen for RHEL 5. The error is seen under Screen version 4.00.03 (FAU) 23-Oct-06. (I noticed an update in the queue, which is installing as I write this.)

  Read the article

• Handle Sysinternals software does not accept -c parameter

  - by Alex

  I am trying to close a handle to a locked file in Windows, using Sysinternals Handle software (http://technet.microsoft.com/en-us/sysinternals/bb896655). First I search for opened handle: handle.exe "C:\Temp" It issues me the following: Far.exe pid: 1144 type: File 2E8: C:\Temp Far.exe pid: 1144 type: File 3A8: C:\Temp Next I run handle.exe with -c parameter. However, whichever number I enter, it does not do anything. I have tried both: 1144, 2E8, 3A8 and 1144 in hex (478) as the software help says it accepts PID in hexademic. Whatever I enter, it just issues the following: Handle v3.46 Copyright (C) 1997-2011 Mark Russinovich Sysinternals - www.sysinternals.com usage: handle [[-a [-l]] [-u] | [-c <handle> [-y]] | [-s]] [-p <process>|<pid>] [name] -a Dump all handle information. -l Just show pagefile-backed section handles. -c Closes the specified handle (interpreted as a hexadecimal number). You must specify the process by its PID. WARNING: Closing handles can cause application or system instability. -y Don't prompt for close handle confirmation. -s Print count of each type of handle open. -u Show the owning user name when searching for handles. -p Dump handles belonging to process (partial name accepted). name Search for handles to objects with <name> (fragment accepted). No arguments will dump all file references. What am I doing wrong?

  Read the article

• Sharepoint Workflow "Failed on Start" only when powershell import script is called from task scheduler

  - by Matt Keller

  I created a simple PowerShell script that takes an XML file in a local directory on our sharepoint server and imports it into a specific SharePoint form library. (Content management enabled library if that makes any difference) This script works flawlessly if i run it from the PowerShell command line manually. I call it like such: ".\script_name.ps1". It completes without error and the item is imported into the form library successfully. The workflow begins on the item and everything is happy dandy. However, i run into issues when i setup a scheduled task using Windows Server 2008 R2's task manager. The task runs the script without error and it does actually import the XML into the form library. I looks perfectly normal just as if i had run the script manually. However, after about 10 or 20 minutes the workflow status for that item changes from "In progress" to "Failed on Start (Retrying)". The scheduled task in question is a basic task and has only one action. (Start a program) The "program/script" box is set to "C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe" and the "Add arguments" box is set to the path of the actual ps1 script. (C:\scripts\sharepoint_import.ps1) I've tried running the task as various users. I've also tried with and without the "Run with highest privileges" check box. Nothing seems to work. For reference, here is the script i am using to import items into the form library.

  Read the article

• Google respond differently to two identical nginx setups and 200 codes; any ideas?

  - by Yuji Tomita

  I'm rather confused... I have a linode.com VPS which has been cloned recently, so the settings are the same between nginx servers. One lives on a dev subdomain, one on a www. I'm trying to run a google experiment on my live server, which claims: Web server rejects utm_expid. Your server doesn't support added query arguments in URLs. My logs show on the dev server where it works: 74.125.186.32 - - [13/Sep/2012:13:33:45 -0700] "GET /product/iphone-case/?utm_expid=25706866-0 HTTP/1.1" 200 12521 "-" "Google_Analytics_Content_Experiments 74.125.186.32 - - [13/Sep/2012:13:33:45 -0700] "GET /product/iphone-case/?ab_reviews=True&utm_expid=25706866-0 HTTP/1.1" 200 14679 "-" "Google_Analytics_Content_Experiments My production server shows google making a second request. 74.125.186.41 - - [13/Sep/2012:13:34:49 -0700] "GET /product/iphone-case/?ab_reviews=on&utm_expid=25706866-1 HTTP/1.1" 200 12104 "-" "Google_Analytics_Content_Experiments 74.125.186.41 - - [13/Sep/2012:13:34:49 -0700] "GET /product/iphone-case/?utm_expid=25706866-1 HTTP/1.1" 200 12122 "-" "Google_Analytics_Content_Experiments 74.125.186.41 - - [13/Sep/2012:13:34:49 -0700] "GET /product/iphone-case/ <--- A second request for some reason. HTTP/1.1" 200 12522 "-" "Google_Analytics_Content_Experiments I'm not sure how google determines why it needs to send a second request without the querystring. The original request has clearly sent a 200 OK status response. Does anybody have any suggestions where to look next? The HTML (compared by diff) on the two pages is exactly the same.

  Read the article

• BackupPC - why does it use rsync --sender --server ... ?

  - by Jakobud

  I'm in the process of experimenting with BackupPC on a CentOS 5.5 server. I have everything pretty much setup with default values. I tried setting up a basic backup for a host's /www directory. The backup fails with the following errors: full backup started for directory /www Running: /usr/bin/ssh -q -x -l root target /usr/bin/rsync --server --sender --numeric-ids --perms --owner --group -D --links --hard-links --times --block-size=2048 --recursive --ignore-times . /www/ Xfer PIDs are now 30395 Read EOF: Connection reset by peer Tried again: got 0 bytes Done: 0 files, 0 bytes Got fatal error during xfer (Unable to read 4 bytes) Backup aborted (Unable to read 4 bytes) Not saving this as a partial backup since it has fewer files than the prior one (got 0 and 0 files versus 0) First of all, yes I have my ssh keys setup to allow me to ssh to the target server without requiring a password. In the process of troubleshooting, I tried the above ssh command directly from the command line, and it hangs. Looking at the end of the debug messages for SSH I get: debug1: Sending subsystem: /usr/bin/rsync --server --sender --numeric-ids --perms --owner --group -D --links --hard-links --times --block-size=2048 --recursive --ignore-times . /www/ Request for subsystem '/usr/bin/rsync --server --sender --numeric-ids --perms --owner --group -D --links --hard-links --times --block-size=2048 --recursive --ignore-times . /www/' failed on channel 0 Next I started looking at the rsync flags. I did not recognize --server and --sender. Looking at the rsync man pages, sure enough, I don't see anything about --server or --sender in there. What are those in there for? Looking at the BackupPC config I have this: RsyncClientPath = /usr/bin/rsync RsyncClientCmd = $sshPath -q -x -l root $host $rsyncPath $argList+ And for the arguments, I have the following listed: --numeric-ids --perms --owner --group -D --links --hard-links --times --block-size=2048 --recursive Notice there is no --server, --sender or --ignore-times. Why are these things getting added in? Is this part of the problem?

  Read the article

• Talking JavaOne with Rock Star Kirk Pepperdine

  - by Janice J. Heiss

  Kirk Pepperdine is not only a JavaOne Rock Star but a Java Champion and a highly regarded expert in Java performance tuning who works as a consultant, educator, and author. He is the principal consultant at Kodewerk Ltd. He speaks frequently at conferences and co-authored the Ant Developer's Handbook. In the rapidly shifting world of information technology, Pepperdine, as much as anyone, keeps up with what's happening with Java performance tuning. Pepperdine will participate in the following sessions: CON5405 - Are Your Garbage Collection Logs Speaking to You? BOF6540 - Java Champions and JUG Leaders Meet Oracle Executives (with Jeff Genender, Mattias Karlsson, Henrik Stahl, Georges Saab) HOL6500 - Finding and Solving Java Deadlocks (with Heinz Kabutz, Ellen Kraffmiller Martijn Verburg, Jeff Genender, and Henri Tremblay) I asked him what technological changes need to be taken into account in performance tuning. “The volume of data we're dealing with just seems to be getting bigger and bigger all the time,” observed Pepperdine. “A couple of years ago you'd never think of needing a heap that was 64g, but today there are deployments where the heap has grown to 256g and tomorrow there are plans for heaps that are even larger. Dealing with all that data simply requires more horse power and some very specialized techniques. In some cases, teams are trying to push hardware to the breaking point. Under those conditions, you need to be very clever just to get things to work -- let alone to get them to be fast. We are very quickly moving from a world where everything happens in a transaction to one where if you were to even consider using a transaction, you've lost." When asked about the greatest misconceptions about performance tuning that he currently encounters, he said, “If you have a performance problem, you should start looking at code at the very least and for that extra step, whip out an execution profiler. I'm not going to say that I never use execution profilers or look at code. What I will say is that execution profilers are effective for a small subset of performance problems and code is literally the last thing you should look at.And what is the most exciting thing happening in the world of Java today? “Interesting question because so many people would say that nothing exciting is happening in Java. Some might be disappointed that a few features have slipped in terms of scheduling. But I'd disagree with the first group and I'm not so concerned about the slippage because I still see a lot of exciting things happening. First, lambda will finally be with us and with lambda will come better ways.” For JavaOne, he is proctoring for Heinz Kabutz's lab. “I'm actually looking forward to that more than I am to my own talk,” he remarked. “Heinz will be the third non-Sun/Oracle employee to present a lab and the first since Oracle began hosting JavaOne. He's got a great message. He's spent a ton of time making sure things are going to work, and we've got a great team of proctors to help out. After that, getting my talk done, the Java Champion's panel session and then kicking back and just meeting up and talking to some Java heads."Finally, what should Java developers know that they currently do not know? “’Write Once, Run Everywhere’ is a great slogan and Java has come closer to that dream than any other technology stack that I've used. That said, different hardware bits work differently and as hard as we try, the JVM can't hide all the differences. Plus, if we are to get good performance we need to work with our hardware and not against it. All this implies that Java developers need to know more about the hardware they are deploying to.” Originally published on blogs.oracle.com/javaone.

  Read the article

• Tyrus 1.8

  - by Pavel Bucek

  Another version of Tyrus, the reference implementation of JSR 356 – Java API for WebSocket is out! Complete list of fixes and features is below, but let me describe some of the new features in more detail. All information presented here is also available in Tyrusdocumentation. What’s new? First to mention is that JSR 356 Maintenance review Ballot is over and the change proposed for 1.1 release was accepted. More details about changes in the API can be found in this article. Important part is that Tyrus 1.8 implements this API, meaning you can use Lambda expressions and some features of Nashorn without the need for any workarounds. Almost all other features are related to client side support, which was significantly improved in this release. Firstly – I have to admit, that Tyrus client contained security issue – SSL Hostname verification was not performed when connecting to “wss” endpoints. This was fixed as part of TYRUS-339 and resulted in some changes in the client configuration API. Now you can control whether HostnameVerification should be performed (SslEngineConfigurator#setHostnameVerificationEnabled(boolean)) or even set your own HostnameVerifier (please use carefully): #setHostnameVerifier(…). Detailed description can be found in Host verification chapter. Another related enhancement is support for Http Basic and Digest authentication schemes. Tyrus client now enables users to provide credentials and underlying implementation will take care of everything else. Our implementation is strictly non pre-emptive, so the login information is sent always as a response to 401 Http Status Code. If the Basic and Digest are not good enough and there is a need to use some custom scheme or something which is not yet supported in Tyrus, custom Authenticator can be registered and the authentication part of the handshake process will be handled by it. Please seeClient HTTP Authentication chapter in the user guide for more details. There are other features, like fine-grain threadpool configuration for JDK client container, build-in Http redirect support and some reshuffling related to unifying the location of client configuration classes and properties definition – every property should be now part of ClientProperties class. All new features are described in the user guide – in chapterTyrus proprietary configuration. Update – Tyrus 1.8.1 There was another slightly late reported issue related to running in environments with SecurityManager enabled, so this version fixes that. Another noteworthy fixes are TYRUS-355 and TYRUS-361; the first one is about incorrect thread factory used for shared container timeout, which resulted in JVM waiting for that thread and not exiting as it should. The other issue enables relative URIs in Location header when using redirect feature. Links Tyrus homepage mailing list JIRA Complete list of changes: Bug [TYRUS-333] – Multiple endpoints on one client [TYRUS-334] – When connection is closed by a peer, periodic heartbeat pong is not stopped [TYRUS-336] – ReaderBuffer.getNextChars() keeps blocking a server thread after client has closed the session [TYRUS-338] – JDK client SSL filter needs better synchronization during handshake phase [TYRUS-339] – SSL hostname verification is missing [TYRUS-340] – Test PathParamTest are not stable with JDK client [TYRUS-341] – A control frame inside a stream of continuation frames is treated as the part of the stream [TYRUS-343] – ControlFrameInDataStreamTest does not pass on GF [TYRUS-345] – NPE is thrown, when shared container timeout property in JDK client is not set [TYRUS-346] – IllegalStateException is thrown, when using proxy in JDK client [TYRUS-347] – Introduce better synchronization in JDK client thread pool [TYRUS-348] – When a client and server close connection simultaneously, JDK client throws NPE [TYRUS-356] – Tyrus cannot determine the connection port for a wss URL [TYRUS-357] – Exception thrown in MessageHandler#OnMessage is not caught in @OnError method [TYRUS-359] – Client based on Java 7 Asynchronous IO makes application unexitable Improvement [TYRUS-328] – JDK 1.7 AIO Client container – threads – (setting threadpool, limits, …) [TYRUS-332] – Consolidate shared client properties into one file. [TYRUS-337] – Create an SSL version of Basic Servlet test New Feature [TYRUS-228] – Add client support for HTTP Basic/Digest Task [TYRUS-330] – create/run tests/servlet/basic via wss [TYRUS-335] – [clustering] – introduce RemoteSession and expose them via separate method (not include remote sessions in the getOpenSessions()) [TYRUS-344] – Introduce Client support for HTTP Redirect

  Read the article

• Tuning Default WorkManager - Advantages and Disadvantages

  - by Murali Veligeti

  Before discussing on Tuning Default WorkManager, lets have a brief introduction on What is Default WorkManger Before Weblogic Server 9.0 release, we had the concept of Execute Queues. WebLogic Server (before WLS 9.0), processing was performed in multiple execute queues. Different classes of work were executed in different queues, based on priority and ordering requirements, and to avoid deadlocks. In addition to the default execute queue, weblogic.kernel.default, there were pre-configured queues dedicated to internal administrative traffic, such as weblogic.admin.HTTP and weblogic.admin.RMI.Users could control thread usage by altering the number of threads in the default queue, or configure custom execute queues to ensure that particular applications had access to a fixed number of execute threads, regardless of overall system load. From WLS 9.0 release onwards WebLogic Server uses is a single thread pool (single thread pool which is called Default WorkManager), in which all types of work are executed. WebLogic Server prioritizes work based on rules you define, and run-time metrics, including the actual time it takes to execute a request and the rate at which requests are entering and leaving the pool.The common thread pool changes its size automatically to maximize throughput. The queue monitors throughput over time and based on history, determines whether to adjust the thread count. For example, if historical throughput statistics indicate that a higher thread count increased throughput, WebLogic increases the thread count. Similarly, if statistics indicate that fewer threads did not reduce throughput, WebLogic decreases the thread count. This new strategy makes it easier for administrators to allocate processing resources and manage performance, avoiding the effort and complexity involved in configuring, monitoring, and tuning custom executes queues. The Default WorkManager is used to handle thread management and perform self-tuning.This Work Manager is used by an application when no other Work Managers are specified in the application’s deployment descriptors. In many situations, the default Work Manager may be sufficient for most application requirements. WebLogic Server’s thread-handling algorithms assign each application its own fair share by default. Applications are given equal priority for threads and are prevented from monopolizing them. The default work-manager, as its name tells, is the work-manager defined by default.Thus, all applications deployed on WLS will use it. But sometimes, when your application is already in production, it's obvious you can't take your EAR / WAR, update the deployment descriptor(s) and redeploy it.The default work-manager belongs to a thread-pool, as initial thread-pool comes with only five threads, that's not much. If your application has to face a large number of hits, you may want to start with more than that.Well, that's quite easy. You have  two option to do so.1) Modify the config.xmlJust add the following line(s) in your server definition : <server> <name>AdminServer</name> <self-tuning-thread-pool-size-min>100</self-tuning-thread-pool-size-min> <self-tuning-thread-pool-size-max>200</self-tuning-thread-pool-size-max> [...] </server> 2) Adding some JVM parameters Add the following system property in setDomainEnv.sh/setDomainEnv.cmd or startWebLogic.sh/startWebLogic.cmd : -Dweblogic.threadpool.MinPoolSize=100 -Dweblogic.threadpool.MaxPoolSize=100 Reboot WLS and see the option has been taken into account . Disadvantage: So far its fine. But here there is an disadvantage in tuning Default WorkManager. Internally Weblogic Server has many work managers configured for different types of work.  if we run out of threads in the self-tuning pool(because of system property -Dweblogic.threadpool.MaxPoolSize) due to being undersized, then important work that WLS might need to do could be starved.  So, while limiting the self-tuning would limit the default WorkManager and internally it also limits all other internal WorkManagers which WLS uses.So the best alternative is to override the default WorkManager that means creating a WorkManager for the Application and assign the WorkManager for the application instead of tuning the Default WorkManager.

  Read the article

• links for 2010-12-23

  - by Bob Rhubart

  Oracle VM Virtualbox 4.0 extension packs (Wim Coekaerts Blog) Wim Coekaerts describes the the new extension pack in Oracle VM Virtualbox 4.0 and how it's different from 3.2 and earlier releases. (tags: oracle otn virtualization virtualbox) Oracle Fusion Middleware Security: Creating OES SM instances on 64 bit systems "I've already opened a bug on this against OES 10gR3 CP5, but in case anyone else runs into it before it gets fixed I wanted to blog it too. (NOTE: CP5 is when official support was introduced for running OES on a 64 bit system with a 64 bit JVM)" - Chris Johnson (tags: oracle otn fusionmiddleware security) Oracle Enterprise Manager Grid Control: Shared loader directory, RAC and WebLogic Clustering "RAC is optional. Even the load balancer is optional. The feed from the agents also goes to the load balancer on a different port and it is routed to the available management server. In normal case, this is ok." - Porus Homi Havewala (tags: WebLogic oracle otn grid clustering) Magic Web Doctor: Thought Process on Upgrading WebLogic Server to 11g "Upgrading to new versions can be challenging task, but it's done for linear scalability, continuous enhanced availability, efficient manageability and automatic/dynamic infrastructure provisioning at a low cost." - Chintan Patel (tags: oracle otn weblogic upgrading) InfoQ: Using a Service Bus to Connect the Supply Chain Peter Paul van de Beek presents a case study of using a service bus in a supply channel connecting a wholesale supplier with hundreds of retailers, the overall context and challenges faced – including the integration of POS software coming from different software providers-, the solution chosen and its implementation, how it worked out and the lessons learned along the way. (tags: ping.fm) Oracle VM VirtualBox 4.0 is released! - The Fat Bloke Sings The Fat Bloke spreads the news and shares some screenshots.  (tags: oracle otn virtualization virtualbox) Leaks on Wikis: "Corporations...You're Next!" Oracle Desktop Virtualization Can Help. (Oracle's Virtualization Blog) "So what can you do to guard against these types of breaches where there is no outsider (or even insider) intrusion to detect per se, but rather someone with malicious intent is physically walking out the door with data that they are otherwise allowed to access in their daily work?" - Adam Hawley (tags: oracle otn virtualization security) OTN ArchBeat Podcast Guest Roster As the OTN ArchBeat Podcast enters its third year, it's time to acknowledge the invaluable contributions of the guests who have participated in ArchBeat programs. Check out this who's who of ArchBeat podcast panelists, with links to their respective interviews and more. (tags: oracle otn oracleace podcast archbeat) Show Notes: Architects in the Cloud (ArchBeat) Now available! Part 2 (of 4) of the ArchBeat interview with Stephen G. Bennett and Archie Reed, the authors of "Silver Clouds, Dark Linings: A Concise Guide to Cloud Computing." (tags: oracle otn podcast cloud) A Cautionary Tale About Multi-Source JNDI Configuration (Scott Nelson's Portal Productivity Ponderings) "I ran into this issue after reading that p13nDataSource and cgDataSource-NonXA should not be configured as multi-source. There were some issues changing them to use the basic JDBC connection string and when rolling back to the bad configuration the server went 'Boom.'" - Scott Nelson (tags: weblogic jdbc oracle jndi)

  Read the article

• tar Cannot open: No such file or directory

  - by Jakobud

  Fresh install of CentOS 5.4 Downloaded the following: http://prdownloads.sourceforge.net/webadmin/webmin-1.510.tar.gz MD5 sum is correct (cdcc09d71d85d81914a90413eaf21d3f). The file is located here: /tmp/webmin-1.510.tar.gz tmp and webmin-1.510.tar.gz both have chmod 777. I am logged in as root. Command: tar -zxfv webmin-1.510.tar Result: tar: v: Cannot open: No such file or directory tar: Error is not recoverable: exiting now tar: Child returned status 2 tar: webmin-1.510.tar: Not found in archive tar: Error exit delayed from previous errors Never run across this before. It's like it thinks that v is a file I want to extract, but its one of the command arguments... If I leave out the v... tar -zxf webmin-1.510.tar.gz The command stalls. It doesn't do anything. Just goes to the next line and no prompt comes up. I have to CTRL-C to get back to the prompt and a ls verifies that it didn't extract anything... My first reaction is that its not a valid tar/gz file or something. But the MD5 matches just fine. So I'm at a loss just a bit...

  Read the article

• Kickstart CentOS 6 prompting for TCP/IP with network set to DHCP

  - by Andy Shinn

  I am trying to stop my kickstart CentOS install prompting me for TCP/IP information. After I click through this prompt (keeping IPv4 and IPv6 to their defaults) the installation continues and completes just fine. Below is my kickstart file: # Andy's super awesome VM kickstart file install url --url=http://mirrors.kernel.org/centos/6/os/x86_64 lang en_US.UTF-8 keyboard us text %include /tmp/network.ks rootpw --iscrypted $6$RA8DyrNTsVJkGIgY$ohZ62HHiOjNnn1yDMZlIu3lQ63D3plGPcbVZtPKE8Oq6Z.IGUgN.kNLkxs/ZymZuluRDWsW2eey5zLOl2G3mp. firewall --service=ssh authconfig --enableshadow --passalgo=sha512 selinux --disabled timezone America/Los_Angeles bootloader --location=mbr --driveorder=vda --append="crashkernel=auto rhgb quiet" # The following is the partition information you requested # Note that any partitions you deleted are not expressed # here so unless you clear all partitions first, this is # not guaranteed to work zerombr clearpart --all --drives=vda --initlabel part /boot --fstype=ext4 --size=500 part pv.253002 --grow --size=1 volgroup vg1 --pesize=4096 pv.253002 logvol / --fstype=ext4 --name=lv_root --vgname=vg1 --grow --size=1024 --maxsize=51200 logvol swap --name=lv_swap --vgname=vg1 --grow --size=4032 --maxsize=4032 repo --name="CentOS" --baseurl=http://mirrors.kernel.org/centos/6/os/x86_64 --cost=100 repo --name="Puppet Labs Products" --baseurl=http://yum.puppetlabs.com/el/6/products/x86_64 repo --name="Puppet Labs Dependencies" --baseurl=http://yum.puppetlabs.com/el/6/dependencies/x86_64 repo --name="EyeFi" --baseurl=http://flexo.eye.fi/6/eye-fi-api %packages @core @server-policy puppet facter %end %pre --erroronfail #!/bin/bash for x in `cat /proc/cmdline`; do case $x in SERVERNAME*) eval $x echo "network --onboot yes --device eth0 --bootproto dhcp --hostname ${SERVERNAME}.eye.fi" /tmp/network.ks ;; esac; done %end %post puppet agent --waitforcert 10 --onetime --no-daemon --pluginsync --server puppet.eye.fi %end reboot My kernel arguments are in this following virt-install command that I use to start the install: virt-install -n zabbix -r 2048 --vcpus=2 -l http://mirrors.kernel.org/centos/6/os/x86_64 --disk /dev/vg_inf1/zabbix --network bridge=br85 --initrd-inject=/home/ashinn/vm_kickstart --extra-args "ks=file:/vm_kickstart SERVERNAME=zabbix" --autostart During the install, I can pull up a console on the second terminal and verify the contents of /tmp/network.ks are: network --onboot=yes --bootproto=dhcp --ipv6=auto --hostname=jenkins2.mydomain.com Why might Anaconda be prompting for the TCP/IP settings when they are already set to DHCP?

  Read the article

• Is there an SSL equivelent to an ssh agent?

  - by Matthew J Morrison

  Here is my situation: There are a number of developers who all need to have access to be able to install ruby gems and python eggs from a remote source. Currently, we have a server inside our firewall that hosts the gems and eggs. We now want the ability to be able to install things hosted on that server outside of our firewall. Since some of the gems and eggs that we host are proprietary I would like to somewhat lock access to that machine down, as unobtrusively as possible to the developers. My first thought was using something like ssh keys. So, I spent some time looking at SSL mutual authentication. I was able to get everything set up and working correctly, testing with curl, but the unfortunate thing was that I had to pass extra arguments to curl so it knows about the certificate, key and certificate authority. I was wondering if there is anything like the ssh agent that I can set up to provide that information automatically so that I can push the certificates and keys to the developer's machines so the developers don't have to log in or provide keys each time they try to install something. Another thing that I want to avoid is having to modify the 'gem' command and the 'pip' command to provide keys when they make the http connection. Any other suggestions that may solve this problem (not related to ssl mutual auth) are also welcome. EDIT: I've been continuing to research this and I came across stunnel. I think this may be what I'm looking for, any feedback regarding stunnel would also be great!

  Read the article

• Why is there no service-oriented language?

  - by Wolfgang

  Edit: To avoid further confusion: I am not talking about web services and such. I am talking about structuring applications internally, it's not about how computers communicate. It's about programming languages, compilers and how the imperative programming paradigm is extended. Original: In the imperative programming field, we saw two paradigms in the past 20 years (or more): object-oriented (OO), and service-oriented (SO) aka. component-based (CB). Both paradigms extend the imperative programming paradigm by introducing their own notion of modules. OO calls them objects (and classes) and lets them encapsulates both data (fields) and procedures (methods) together. SO, in contrast, separates data (records, beans, ...) from code (components, services). However, only OO has programming languages which natively support its paradigm: Smalltalk, C++, Java and all other JVM-compatibles, C# and all other .NET-compatibles, Python etc. SO has no such native language. It only comes into existence on top of procedural languages or OO languages: COM/DCOM (binary, C, C++), CORBA, EJB, Spring, Guice (all Java), ... These SO frameworks clearly suffer from the missing native language support of their concepts. They start using OO classes to represent services and records. This leads to designs where there is a clear distinction between classes that have methods only (services) and those that have fields only (records). Inheritance between services or records is then simulated by inheritance of classes. Technically, its not kept so strictly but in general programmers are adviced to make classes to play only one of the two roles. They use additional, external languages to represent the missing parts: IDL's, XML configurations, Annotations in Java code, or even embedded DSL like in Guice. This is especially needed, but not limited to, since the composition of services is not part of the service code itself. In OO, objects create other objects so there is no need for such facilities but for SO there is because services don't instantiate or configure other services. They establish an inner-platform effect on top of OO (early EJB, CORBA) where the programmer has to write all the code that is needed to "drive" SO. Classes represent only a part of the nature of a service and lots of classes have to be written to form a service together. All that boiler plate is necessary because there is no SO compiler which would do it for the programmer. This is just like some people did it in C for OO when there was no C++. You just pass the record which holds the data of the object as a first parameter to the procedure which is the method. In a OO language this parameter is implicit and the compiler produces all the code that we need for virtual functions etc. For SO, this is clearly missing. Especially the newer frameworks extensively use AOP or introspection to add the missing parts to a OO language. This doesn't bring the necessary language expressiveness but avoids the boiler platform code described in the previous point. Some frameworks use code generation to produce the boiler plate code. Configuration files in XML or annotations in OO code is the source of information for this. Not all of the phenomena that I mentioned above can be attributed to SO but I hope it clearly shows that there is a need for a SO language. Since this paradigm is so popular: why isn't there one? Or maybe there are some academic ones but at least the industry doesn't use one.

  Read the article

< Previous Page | 136 137 138 139 140 141 142 143 144 145 146 147  | Next Page >