Search Results

Search found 7843 results on 314 pages for 'power over ethernet'.

Page 140/314 | < Previous Page | 136 137 138 139 140 141 142 143 144 145 146 147  | Next Page >

  • Network switching issues with MacOS 10.7?

    - by Denis
    I'm having a wired problem and hope somebody can tip me, what way should I dig to. I'm using MacBookPro with Lion 10.7.3 both at my working place & at home. At working place, we have a domain-based network with 802.1x authorization (more than 400 computers) and to connect it I'm using Ethernet cable. IP range is 10.10.2.*. All network settings are setup automatically by DHCP. Also, in settings, I have Network Account Server setup in the User&Groups Settings for my work Domain server - and it is available only from corporate network. At home, I have an ADSL router, that shares Internet connection by WiFi in NAT mode. I'm using WiFi to connect it. Router gives out addresses from 192.168.1.* range and all settings are also set up by router's DHCP. So, my problem is the following. When I come back home from the office, I open my MacBook and AirPort automatically connects my WiFi network. After this, for about 1 minute I'm able to browse sites & ping hosts successfully. But after this minute, network connection is broken down. All pings return time-out. trace route to google.com stops on 192.168.1.1 (which is my router). This lasts for 3-4 minutes. After that network connection is automatically repaired and all pings go smoothly again. At the same time, when my MacBook return timeouts, I can successfully ping any host from my wife's MacBook - so this doesn't look like router issue. When I come to the office, I don't have any issues and Internet connection is available & stable moments after ethernet cable plugged in. Do anybody has any clues about this? What should I monitor & what settings look for resolving this issue? Please, ask, what additional information should I provide. Hoping for good advice & thanks in advance!

    Read the article

  • default virtual network interface

    - by Zulakis
    I got a single ethernet connection to a network but need multiple ips. Because of this, I am using virtual network interfaces like this: auto intern iface intern inet static address ... netmask ... gateway ...U auto intern:1 iface intern:1 inet static address ... netmask ... gateway ... I need to specify which IP should be used by default for outgoing traffic. How can I do that?

    Read the article

  • Unable to connect to Linux (Virtual OS-vmware) through Putty on Windows

    - by RBA
    Hi, I want to access my Linux box (Virtual OS) through Putty on Windows using Run command: putty -ssh -P 22 192.168.171.130,,, but it is returning an error message, not able to connect. But few days back I was able to connect it today. But not now. Why?? Windows IP Configuration Host Name . . . . . . . . . . . . : rba7791fd466 Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter VMware Network Adapter VMnet1: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet1 Physical Address. . . . . . . . . : 00-50-56-C0-00-01 Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.234.1 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Ethernet adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Dell Wireless 1395 WLAN Mini-Card Physical Address. . . . . . . . . : 00-24-2B-60-A0-88 Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 10.0.0.2 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 10.0.0.1 DHCP Server . . . . . . . . . . . : 10.0.0.1 DNS Servers . . . . . . . . . . . : 10.0.0.1 Lease Obtained. . . . . . . . . . : Friday, August 28, 2009 4:11:09 AM Lease Expires . . . . . . . . . . : Saturday, August 29, 2009 4:11:09 AM Ubuntu Configuration eth0 inet addr:192.168.171.130

    Read the article

  • Is there a way to setup a hotspot with a domain name rather than IP address?

    - by WagnerMatosUK
    Basically I've setup a hotspot and its currently being accessed through an IP address. I'd like to use a hostname instead. This is for internal use only, meaning the ODROID device which is being used to as Access Point is connected to the internet via ethernet and only a few devices will access the AP. My setup details: Arch Linux on an ODROID U3 device, using hostapd and dhcp server. PS: I'm quite inexperienced with network so I might be missing something obvious here. Thanks in advance

    Read the article

  • FC SAN network high-error rate simulation

    - by Wieslaw Herr
    Is there a way to simulate a malfunctioning device or a faulty cable in a FC SAN network? edit: I know shutting down a port on a switch is an option, I'd like to simulate high error rates though. In an ethernet network it would be a simple case of adding a transparent bridge that discards a given percent of the packets, but I have absolutely no idea how to tackle that in an Fibre Channel environment...

    Read the article

  • arp "who-has tell" on cloned machine

    - by mcmorry
    I have a urgent problem to solve today, but I'm lost. Please help. I've cloned a Virtual Machine hosted on VM Ware ESXi 4.1 The OS is now Ubuntu Server 12.04 LTS, but at the time of cloning it was 10.04 LTS. I fixed the MAC address manually inside /etc/udev/rules.d/70-persistent-net.rules. It is a known problem on Ubuntu. I had to remove the old MAC address and set the new one as eth0. Everything seems to work fine, except ARP. My provider OVH sent me a warning to resolve it today (this is the second day) or they will block my IP! The log contains many lines like this: Tue Jun 5 01:04:29 2012 : arp who-has 178.32.136.212 tell 178.32.136.224 where .224 is the cloned server that is causing problems, and .212 is the cloned one. arp -na returns: ? (178.33.230.254) at 00:07:b4:00:00:02 [ether] on eth0 ? (178.32.136.212) at 00:50:56:09:8e:f1 [ether] on eth0 The first IP is the ESXi machine. The second one should not be there. I'm not an expert and I don't know what else to do to fix this problem. Any help will be very appreciated. Thanks. EDIT: ifcofig on .224: eth0 Link encap:Ethernet HWaddr 00:50:56:01:32:c6 inet addr:178.32.136.224 Bcast:178.32.136.255 Mask:255.255.255.0 inet6 addr: fe80::250:56ff:fe01:32c6/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:399924 errors:0 dropped:465 overruns:0 frame:0 TX packets:241884 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:58006071 (58.0 MB) TX bytes:663603166 (663.6 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:516216 errors:0 dropped:0 overruns:0 frame:0 TX packets:516216 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:236284275 (236.2 MB) TX bytes:236284275 (236.2 MB) ifconfig on .212: eth0 Link encap:Ethernet HWaddr 00:50:56:09:8e:f1 inet addr:178.32.136.212 Bcast:178.32.136.255 Mask:255.255.255.0 inet6 addr: fe80::250:56ff:fe09:8ef1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:16014 errors:0 dropped:0 overruns:0 frame:0 TX packets:14511 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:15134444 (15.1 MB) TX bytes:2683025 (2.6 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:9944 errors:0 dropped:0 overruns:0 frame:0 TX packets:9944 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1139347 (1.1 MB) TX bytes:1139347 (1.1 MB)

    Read the article

  • Cant see my wireless internal card on BackTrack 5

    - by Tomer
    I have BackTrack 5 R3 installed on VMware and its on bridged connection so it gets its own ip on my network and it works I get internet connection but there is no ethernet cable connected yet somehow when I do iwconfig I cant see wlan0 and no other wireless card but etho is connected to the network somehow.... cant it be that eth0 is my wireless card which somehow misconfigured? Its an intel centrino advanced n 6205

    Read the article

  • How to transfer files from windows 7 pc to vista

    - by Samuel C
    Tried using direct connection using Ethernet cable and using windows easy transfer, but no luck, also tried using ad-hoc, home group, and connecting through a router both wired and wireless but no luck, im getting a little frustrated as I need to transfer these files because im selling one of them this afternoon! All I need to do is transfer some documents and files. The windows 7 pc recognizes the vista pc but vista cant recognize the win 7.

    Read the article

  • Cisco 1841 and routing /29 address

    - by Jonathan
    Could someone please explain in general terms how I'd configure a Cisco 1841 (2x ethernet ports) to route a public /29 address block (6 hosts) to my internal network. I wish to give the Cisco router one public IP and then several of my internal Windows servers will receive the other public IP addresses. Other hosts behind the router will access Internet via NAT. I'm a bit confused as I've only ever setup routers/firewalls that had a single public IP address with NAT and port forwarding to internal servers.

    Read the article

  • Local Only 3G Router via Broadband Device?

    - by GateKiller
    I am looking for the name/type of device which does the following: Connects to the internet via ethernet or wireless and then produces a "fake" 3G signal for my iPhone to connect to. The 3G siginal in my office is very weak or non-existant and I need a way of boosting or replacing it.

    Read the article

  • Inbound connections to a ubuntu machine running a VPN

    - by shanedowling
    Is it possible to open inbound connections to a machine connected to a VPN server? The machine is running ubuntu 9.10 with two network devices(a wireless card and ethernet port), I can connect to my machine locally using a local ip but when I try port forward using my router I can't connect from my external ip. Is there a way around this? I figure with 2 network devices I can vpn over one and use the other for inbound connections but I can't figure out how to do this. Thanks

    Read the article

  • Can't ping Ip over bridge

    - by tmn29a
    I'm unable to ping another host over a bridge I created, I can't see the error -.- It's a remote machine running debian stable with some backports for which I want to set up DHCP on the new Subnet 172.30.xxx.xxx to be used for KVM-Guests. ifconfig : bond0 Link encap:Ethernet HWaddr e4:11:5b:d4:94:30 inet addr:10.54.2.84 Bcast:10.54.2.127 Mask:255.255.255.192 inet6 addr: fe80::e611:5bff:fed4:9430/64 Scope:Link UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1 RX packets:34277 errors:0 dropped:0 overruns:0 frame:0 TX packets:18379 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2638709 (2.5 MiB) TX bytes:2887894 (2.7 MiB) br0 Link encap:Ethernet HWaddr f2:fc:4d:7f:15:f0 inet addr:172.30.254.66 Bcast:172.30.254.127 Mask:255.255.255.192 inet6 addr: fe80::f0fc:4dff:fe7f:15f0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:252 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:10800 (10.5 KiB) Pings : ping -I br0 172.30.xxx.65 PING 172.30.xxx.65 (172.30.xxx.65) from 172.30.xxx.66 br0: 56(84) bytes of data. --- 172.30.xxx.65 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2017ms ping -I bond0 172.30.254.65 PING 172.30.xxx.65 (172.30.xxx.65) from 10.54.2.84 bond0: 56(84) bytes of data. 64 bytes from 172.30.x.65: icmp_req=1 ttl=64 time=0.599 ms 64 bytes from 172.30.x.65: icmp_req=2 ttl=64 time=0.575 ms 64 bytes from 172.30.x.65: icmp_req=3 ttl=64 time=0.565 ms --- 172.30.x.65 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1999ms rtt min/avg/max/mdev = 0.565/0.579/0.599/0.031 ms Route : Destination Gateway Genmask Flags Metric Ref Use Iface 172.30.x.64 * 255.255.255.192 U 0 0 0 br0 10.54.x.64 * 255.255.255.192 U 0 0 0 bond0 default 10.54.x.65 0.0.0.0 UG 0 0 0 bond0 default 172.30.x.65 0.0.0.0 UG 0 0 0 br0 The Interface : cat /etc/network/interfaces auto lo br0 iface lo inet loopback # Bonding Interface auto bond0 iface bond0 inet static address 10.54.x.84 netmask 255.255.255.192 network 10.54.x.64 gateway 10.54.x.65 slaves eth0 eth1 bond_mode active-backup bond_miimon 100 bond_downdelay 200 bond_updelay 200 iface br0 inet static bridge_ports bond0 address 172.30.x.66 broadcast 172.30.x.127 netmask 255.255.x.192 gateway 172.30.x.65 bridge_maxwait 0 If you need more info please ask. Thanks for your help !

    Read the article

  • Can I use an apple airport express as a wired bridge?

    - by Chris
    I have a wireless network using an Apple Airport extreme. That device is set up in my office and hooked up to the cable modem. I have a TV in another room which can accept a wired internet connection (not wireless enabled). Can I use an Apple airport express's ethernet jack to create a wireless to wired bridge? If not what device would I use to do the same thing?

    Read the article

  • Temporarily configuring a default gateway (Windows Vista)

    - by justintime
    I would like to change the default gateway for the wired ethernet port on my laptop- the DHCP server is giving the wrong one. I would like it to revert to the existing config on a reboot. I would prefer a command line way of doing it - so I can easily repeat the command as needed. Do I need ipconfig or route - both of which confuse me.

    Read the article

  • How does Windows 7 detect my switches?

    - by Daniel
    I notices in the Network overview of Windows 7 that my switches are found on the path to the gateway, which baffled me completely. The last time I checked they just took the ethernet packages and transported them to the "right" location. How does this switch detection work? Do switches alter the packages? Do they react on ICMP messages?

    Read the article

  • BASH - Run command for each line in output of previous command

    - by user1582375
    All, I am want to request all network services using: networksetup -listallnetworkservices I then want to run the below command for each line in produced from the above command: networksetup -setautoproxyurl "A LINE FROM ABOVE" http://etc... Adiitonally, I only want to issue the setautoproxyurl command for service with "Ethernet" or "Wi-Fi" in the name networksetup -listallnetworkservices | while read line; do networksetup -setautoproxy $line http://etc...

    Read the article

  • Slow WLAN file transfer between server and tablet

    - by user266985
    My file server is running Ubuntu 12.04 and I'm sharing files from it over samba. It is connected via gigabit ethernet. My desktop, running Windows 8.1, is also connected via gigabit ethernet. I can transfer files between the two and completely saturate that gigabit pipe. However, I just got a Surface Pro 2, and I'm trying to stream HD movies from my server to the device over WiFi. For some reason, I can't break much past 1.5MB/s transferring files over the network. I've tried streaming through XBMC and a standard file copy; no difference. To add the confusion, if I connect to my guest network and then use my VPN server (installed on the router) to access the file server, I get around 3.2MB/s. I've been running diagnostics to determine the root and I think I've found it but I have no idea what is causing it or how to fix it. Router: Asus RT-N66U Surface Pro 2 Network Card: Marvell Avastar 350N (Driver 19/09/2013 v14.69.24044.150) InSSIDer: Link Score: 100 Co-Channels: 0 Overlapping: 0 5GHz Network Channel: 48+44 iperf File Server as Server; Surface Pro 2 as Client - TCP Performance: Acceptable ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 85.3 KByte (default) ------------------------------------------------------------ [ 4] local 192.168.0.90 port 5001 connected with 192.168.0.56 port 57367 [ ID] Interval Transfer Bandwidth [ 4] 0.0- 1.0 sec 10.1 MBytes 84.7 Mbits/sec [ 4] 1.0- 2.0 sec 10.4 MBytes 87.6 Mbits/sec [ 4] 2.0- 3.0 sec 10.6 MBytes 88.8 Mbits/sec [ 4] 3.0- 4.0 sec 10.7 MBytes 89.5 Mbits/sec [ 4] 4.0- 5.0 sec 10.1 MBytes 84.4 Mbits/sec [ 4] 5.0- 6.0 sec 10.2 MBytes 85.8 Mbits/sec [ 4] 6.0- 7.0 sec 7.04 MBytes 59.1 Mbits/sec [ 4] 7.0- 8.0 sec 10.8 MBytes 90.2 Mbits/sec [ 4] 8.0- 9.0 sec 10.6 MBytes 89.1 Mbits/sec [ 4] 9.0-10.0 sec 8.62 MBytes 72.3 Mbits/sec [ 4] 0.0-10.0 sec 99.2 MBytes 83.1 Mbits/sec iperf Surface Pro 2 as Server, File Server as Client Performance: Poor ------------------------------------------------------------ Client connecting to 192.168.0.56, TCP port 5001 TCP window size: 22.9 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.0.90 port 40233 connected with 192.168.0.56 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0- 1.0 sec 1.50 MBytes 12.6 Mbits/sec [ 3] 1.0- 2.0 sec 1.50 MBytes 12.6 Mbits/sec [ 3] 2.0- 3.0 sec 1.50 MBytes 12.6 Mbits/sec [ 3] 3.0- 4.0 sec 1.25 MBytes 10.5 Mbits/sec [ 3] 4.0- 5.0 sec 1.62 MBytes 13.6 Mbits/sec [ 3] 5.0- 6.0 sec 1.50 MBytes 12.6 Mbits/sec [ 3] 6.0- 7.0 sec 1.38 MBytes 11.5 Mbits/sec [ 3] 7.0- 8.0 sec 1.50 MBytes 12.6 Mbits/sec [ 3] 8.0- 9.0 sec 1.50 MBytes 12.6 Mbits/sec [ 3] 9.0-10.0 sec 1.62 MBytes 13.6 Mbits/sec [ 3] 0.0-10.1 sec 15.0 MBytes 12.4 Mbits/sec For some reason, it gets capped and I haven't got a clue why. Any suggestions? Edit: My link speed is reported as 270Mbps by Windows. I'm less than two metres from the router with a clear line of sight.

    Read the article

  • Toshiba Satellite Laptop Realtek Network Driver Error code (10)?

    - by Silent
    hello all i have a Toshiba 64 bit windows vista, i tried looking for the drivers from the main website but no luck all the ones i got did not work or did not do anything. would someone know where i can find it or maybe fix this issue it will not find any network wireless or even if i hook up the Ethernet cable. i don't know why Toshiba makes it hard they should have a complete bundle. Model: A305-S687

    Read the article

  • WLAN adapter on Ubuntu Server inside Hyper-V

    - by Firefox333
    I need to set up an Ubuntu server as a router. However we need to make it wireless and wired. I need a WLAN adapter for the wireless part of the router. I get my Internet connection on my server through my wireless adapter from my host but it automatically sees it as an Ethernet adapter instead of as a wireless adapter. Is there any way of making a (virtual) wireless adapter on Ubuntu server 12.04 inside a hyper-v machine?

    Read the article

  • How long would this file transfer take?

    - by CT
    I have 12 hours to backup 2 TB of data. I would like to backup to a network share to a computer using consumer WD 2TB Black 7200rpm hard drives. Gigabit Ethernet. What other variables would I need to consider to see if this is feasible? How would I set up this calculation?

    Read the article

  • lan extension over wide area

    - by avinash
    when we use technology like leased line to extend a lan over a wide area(like when connecting two offices such that hosts in both offices use private ip addresses) , why do we use encapsulations like ppp or hdlc...what can't we use the ethernet header to communicate because mac addresses are unique and can easily be used to identify hosts just like a small area lan... this question may seem a bit absurd but it has been bugging me...so plz explain

    Read the article

< Previous Page | 136 137 138 139 140 141 142 143 144 145 146 147  | Next Page >