Search Results

Search found 6670 results on 267 pages for 'speed dial'.

Page 140/267 | < Previous Page | 136 137 138 139 140 141 142 143 144 145 146 147  | Next Page >

• ASA hairpining: I basicaly want to allow 2 spokes to be able to communicate with each other.

  - by Thirst4Knowledge

  ASA Spoke to Spoke Communication I have been looking at spke to spoke comms or "hairpining" for months and have posted on numerouse forums but to no avail. I have a Hub and spoke network where the HUB is an ASA Firewall version 8.2 * I basicaly want to allow 2 spokes to be able to communicate with each other. I think that I have got the concept of the ASA Config for example: same-security-traffic permit intra-interface access-list HQ-LAN extended permit ip ASA-LAN 255.255.248.0 HQ-LAN 255.255.255.0 access-list HQ-LAN extended permit ip 192.168.99.0 255.255.255.0 HQ-LAN 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 HQ-LAN 255.255.255.0 access-list no-nat extended permit ip HQ-LAN 255.255.255.0 192.168.99.0 255.255.255.0 access-list no-nat extended permit ip 192.168.99.0 255.255.255.0 HQ-LAN 255.255.255.0 I think my problem may be that the other spokes are not CIsco Firewalls and I need to work out how to do the alternative setups. I want to at least make sure that my firewall etup is correct then I can move onto the other spokes here is my config: Hostname ASA domain-name mydomain.com names ! interface Ethernet0/0 speed 100 duplex full nameif outside security-level 0 ip address 1.1.1.246 255.255.255.224 ! interface Ethernet0/1 speed 100 duplex full nameif inside security-level 100 ip address 192.168.240.33 255.255.255.224 ! interface Ethernet0/2 description DMZ VLAN-253 speed 100 duplex full nameif DMZ security-level 50 ip address 192.168.254.1 255.255.255.0 ! interface Ethernet0/3 no nameif no security-level no ip address ! boot system disk0:/asa821-k8.bin ftp mode passive clock timezone GMT/BST 0 dns server-group DefaultDNS domain-name mydomain.com same-security-traffic permit inter-interface same-security-traffic permit intra-interface object-group network ASA_LAN_Plus_HQ_LAN network-object ASA_LAN 255.255.248.0 network-object HQ-LAN 255.255.255.0 access-list outside_acl remark Exchange web access-list outside_acl extended permit tcp any host MS-Exchange_server-NAT eq https access-list outside_acl remark PPTP Encapsulation access-list outside_acl extended permit gre any host MS-ISA-Server-NAT access-list outside_acl remark PPTP access-list outside_acl extended permit tcp any host MS-ISA-Server-NAT eq pptp access-list outside_acl remark Intra Http access-list outside_acl extended permit tcp any host MS-ISA-Server-NAT eq www access-list outside_acl remark Intra Https access-list outside_acl extended permit tcp any host MS-ISA-Server-NAT eq https access-list outside_acl remark SSL Server-Https 443 access-list outside_acl remark Https 8443(Open VPN Custom port for SSLVPN client downlaod) access-list outside_acl remark FTP 20 access-list outside_acl remark Http access-list outside_acl extended permit tcp any host OpenVPN-Srvr-NAT object-group DM_INLINE_TCP_1 access-list outside_acl extended permit tcp any host OpenVPN-Srvr-NAT eq 8443 access-list outside_acl extended permit tcp any host OpenVPN-Srvr-NAT eq www access-list outside_acl remark For secure remote Managment-SSH access-list outside_acl extended permit tcp any host OpenVPN-Srvr-NAT eq ssh access-list outside_acl extended permit ip Genimage_Anyconnect 255.255.255.0 ASA_LAN 255.255.248.0 access-list ASP-Live remark Live ASP access-list ASP-Live extended permit ip ASA_LAN 255.255.248.0 192.168.60.0 255.255.255.0 access-list Bo remark Bo access-list Bo extended permit ip ASA_LAN 255.255.248.0 192.168.169.0 255.255.255.0 access-list Bill remark Bill access-list Bill extended permit ip ASA_LAN 255.255.248.0 Bill.15 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 Bill.5 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.149.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.160.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.165.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.144.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.140.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.152.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.153.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.163.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.157.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.167.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.156.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 North-Office-LAN 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.161.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.143.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.137.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.159.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 HQ-LAN 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.169.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.150.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.162.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.166.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.168.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.174.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.127.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.173.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.175.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.176.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.100.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.99.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 10.10.10.0 255.255.255.0 access-list no-nat extended permit ip host 192.168.240.34 Cisco-admin-LAN 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 Genimage_Anyconnect 255.255.255.0 access-list no-nat extended permit ip host Tunnel-DC host HQ-SDSL-Peer access-list no-nat extended permit ip HQ-LAN 255.255.255.0 North-Office-LAN 255.255.255.0 access-list no-nat extended permit ip North-Office-LAN 255.255.255.0 HQ-LAN 255.255.255.0 access-list Car remark Car access-list Car extended permit ip ASA_LAN 255.255.248.0 192.168.165.0 255.255.255.0 access-list Che remark Che access-list Che extended permit ip ASA_LAN 255.255.248.0 192.168.144.0 255.255.255.0 access-list Chi remark Chi access-list Chi extended permit ip ASA_LAN 255.255.248.0 192.168.140.0 255.255.255.0 access-list Cla remark Cla access-list Cla extended permit ip ASA_LAN 255.255.248.0 192.168.152.0 255.255.255.0 access-list Eas remark Eas access-list Eas extended permit ip ASA_LAN 255.255.248.0 192.168.149.0 255.255.255.0 access-list Ess remark Ess access-list Ess extended permit ip ASA_LAN 255.255.248.0 192.168.153.0 255.255.255.0 access-list Gat remark Gat access-list Gat extended permit ip ASA_LAN 255.255.248.0 192.168.163.0 255.255.255.0 access-list Hud remark Hud access-list Hud extended permit ip ASA_LAN 255.255.248.0 192.168.157.0 255.255.255.0 access-list Ilk remark Ilk access-list Ilk extended permit ip ASA_LAN 255.255.248.0 192.168.167.0 255.255.255.0 access-list Ken remark Ken access-list Ken extended permit ip ASA_LAN 255.255.248.0 192.168.156.0 255.255.255.0 access-list North-Office remark North-Office access-list North-Office extended permit ip ASA_LAN 255.255.248.0 North-Office-LAN 255.255.255.0 access-list inside_acl remark Inside_ad access-list inside_acl extended permit ip any any access-list Old_HQ remark Old_HQ access-list Old_HQ extended permit ip ASA_LAN 255.255.248.0 HQ-LAN 255.255.255.0 access-list Old_HQ extended permit ip HQ-LAN 255.255.255.0 192.168.99.0 255.255.255.0 access-list She remark She access-list She extended permit ip ASA_LAN 255.255.248.0 192.168.150.0 255.255.255.0 access-list Lit remark Lit access-list Lit extended permit ip ASA_LAN 255.255.248.0 192.168.143.0 255.255.255.0 access-list Mid remark Mid access-list Mid extended permit ip ASA_LAN 255.255.248.0 192.168.137.0 255.255.255.0 access-list Spi remark Spi access-list Spi extended permit ip ASA_LAN 255.255.248.0 192.168.162.0 255.255.255.0 access-list Tor remark Tor access-list Tor extended permit ip ASA_LAN 255.255.248.0 192.168.166.0 255.255.255.0 access-list Tra remark Tra access-list Tra extended permit ip ASA_LAN 255.255.248.0 192.168.168.0 255.255.255.0 access-list Tru remark Tru access-list Tru extended permit ip ASA_LAN 255.255.248.0 192.168.174.0 255.255.255.0 access-list Yo remark Yo access-list Yo extended permit ip ASA_LAN 255.255.248.0 192.168.127.0 255.255.255.0 access-list Nor remark Nor access-list Nor extended permit ip ASA_LAN 255.255.248.0 192.168.159.0 255.255.255.0 access-list Nor extended permit ip ASA_LAN 255.255.248.0 192.168.173.0 255.255.255.0 inactive access-list ST remark ST access-list ST extended permit ip ASA_LAN 255.255.248.0 192.168.175.0 255.255.255.0 access-list Le remark Le access-list Le extended permit ip ASA_LAN 255.255.248.0 192.168.161.0 255.255.255.0 access-list DMZ-ACL remark DMZ access-list DMZ-ACL extended permit ip host OpenVPN-Srvr any access-list no-nat-dmz remark DMZ -No Nat access-list no-nat-dmz extended permit ip 192.168.250.0 255.255.255.0 HQ-LAN 255.255.255.0 access-list Split_Tunnel_List remark ASA-LAN access-list Split_Tunnel_List standard permit ASA_LAN 255.255.248.0 access-list Split_Tunnel_List standard permit Genimage_Anyconnect 255.255.255.0 access-list outside_cryptomap_30 remark Po access-list outside_cryptomap_30 extended permit ip ASA_LAN 255.255.248.0 Po 255.255.255.0 access-list outside_cryptomap_24 extended permit ip ASA_LAN 255.255.248.0 192.168.100.0 255.255.255.0 access-list outside_cryptomap_16 extended permit ip ASA_LAN 255.255.248.0 192.168.99.0 255.255.255.0 access-list outside_cryptomap_34 extended permit ip ASA_LAN 255.255.248.0 10.10.10.0 255.255.255.0 access-list outside_31_cryptomap extended permit ip host 192.168.240.34 Cisco-admin-LAN 255.255.255.0 access-list outside_32_cryptomap extended permit ip host Tunnel-DC host HQ-SDSL-Peer access-list Genimage_VPN_Any_connect_pix_client remark Genimage "Any Connect" VPN access-list Genimage_VPN_Any_connect_pix_client standard permit Genimage_Anyconnect 255.255.255.0 access-list Split-Tunnel-ACL standard permit ASA_LAN 255.255.248.0 access-list nonat extended permit ip HQ-LAN 255.255.255.0 192.168.99.0 255.255.255.0 pager lines 24 logging enable logging timestamp logging console notifications logging monitor notifications logging buffered warnings logging asdm informational no logging message 106015 no logging message 313001 no logging message 313008 no logging message 106023 no logging message 710003 no logging message 106100 no logging message 302015 no logging message 302014 no logging message 302013 no logging message 302018 no logging message 302017 no logging message 302016 no logging message 302021 no logging message 302020 flow-export destination inside MS-ISA-Server 2055 flow-export destination outside 192.168.130.126 2055 flow-export template timeout-rate 1 flow-export delay flow-create 15 mtu outside 1500 mtu inside 1500 mtu DMZ 1500 mtu management 1500 ip local pool RAS-VPN 10.0.0.1.1-10.0.0.1.254 mask 255.255.255.255 icmp unreachable rate-limit 1 burst-size 1 icmp permit any unreachable outside icmp permit any echo outside icmp permit any echo-reply outside icmp permit any outside icmp permit any echo inside icmp permit any echo-reply inside icmp permit any echo DMZ icmp permit any echo-reply DMZ asdm image disk0:/asdm-621.bin no asdm history enable arp timeout 14400 nat-control global (outside) 1 interface global (inside) 1 interface nat (inside) 0 access-list no-nat nat (inside) 1 0.0.0.0 0.0.0.0 nat (DMZ) 0 access-list no-nat-dmz static (inside,outside) MS-ISA-Server-NAT MS-ISA-Server netmask 255.255.255.255 static (DMZ,outside) OpenVPN-Srvr-NAT OpenVPN-Srvr netmask 255.255.255.255 static (inside,outside) MS-Exchange_server-NAT MS-Exchange_server netmask 255.255.255.255 access-group outside_acl in interface outside access-group inside_acl in interface inside access-group DMZ-ACL in interface DMZ route outside 0.0.0.0 0.0.0.0 1.1.1.225 1 route inside 10.10.10.0 255.255.255.0 192.168.240.34 1 route outside Genimage_Anyconnect 255.255.255.0 1.1.1.225 1 route inside Open-VPN 255.255.248.0 OpenVPN-Srvr 1 route inside HQledon-Voice-LAN 255.255.255.0 192.168.240.34 1 route outside Bill 255.255.255.0 1.1.1.225 1 route outside Yo 255.255.255.0 1.1.1.225 1 route inside 192.168.129.0 255.255.255.0 192.168.240.34 1 route outside HQ-LAN 255.255.255.0 1.1.1.225 1 route outside Mid 255.255.255.0 1.1.1.225 1 route outside 192.168.140.0 255.255.255.0 1.1.1.225 1 route outside 192.168.143.0 255.255.255.0 1.1.1.225 1 route outside 192.168.144.0 255.255.255.0 1.1.1.225 1 route outside 192.168.149.0 255.255.255.0 1.1.1.225 1 route outside 192.168.152.0 255.255.255.0 1.1.1.225 1 route outside 192.168.153.0 255.255.255.0 1.1.1.225 1 route outside North-Office-LAN 255.255.255.0 1.1.1.225 1 route outside 192.168.156.0 255.255.255.0 1.1.1.225 1 route outside 192.168.157.0 255.255.255.0 1.1.1.225 1 route outside 192.168.159.0 255.255.255.0 1.1.1.225 1 route outside 192.168.160.0 255.255.255.0 1.1.1.225 1 route outside 192.168.161.0 255.255.255.0 1.1.1.225 1 route outside 192.168.162.0 255.255.255.0 1.1.1.225 1 route outside 192.168.163.0 255.255.255.0 1.1.1.225 1 route outside 192.168.165.0 255.255.255.0 1.1.1.225 1 route outside 192.168.166.0 255.255.255.0 1.1.1.225 1 route outside 192.168.167.0 255.255.255.0 1.1.1.225 1 route outside 192.168.168.0 255.255.255.0 1.1.1.225 1 route outside 192.168.173.0 255.255.255.0 1.1.1.225 1 route outside 192.168.174.0 255.255.255.0 1.1.1.225 1 route outside 192.168.175.0 255.255.255.0 1.1.1.225 1 route outside 192.168.99.0 255.255.255.0 1.1.1.225 1 route inside ASA_LAN 255.255.255.0 192.168.240.34 1 route inside 192.168.124.0 255.255.255.0 192.168.240.34 1 route inside 192.168.50.0 255.255.255.0 192.168.240.34 1 route inside 192.168.51.0 255.255.255.128 192.168.240.34 1 route inside 192.168.240.0 255.255.255.224 192.168.240.34 1 route inside 192.168.240.164 255.255.255.224 192.168.240.34 1 route inside 192.168.240.196 255.255.255.224 192.168.240.34 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa-server vpn protocol radius max-failed-attempts 5 aaa-server vpn (inside) host 192.168.X.2 timeout 60 key a5a53r3t authentication-port 1812 radius-common-pw a5a53r3t aaa authentication ssh console LOCAL aaa authentication http console LOCAL http server enable http 0.0.0.0 0.0.0.0 inside http 1.1.1.2 255.255.255.255 outside http 1.1.1.234 255.255.255.255 outside http 0.0.0.0 0.0.0.0 management http 1.1.100.198 255.255.255.255 outside http 0.0.0.0 0.0.0.0 outside crypto map FW_Outside_map 1 match address Bill crypto map FW_Outside_map 1 set peer x.x.x.121 crypto map FW_Outside_map 1 set transform-set SECURE crypto map FW_Outside_map 2 match address Bo crypto map FW_Outside_map 2 set peer x.x.x.202 crypto map FW_Outside_map 2 set transform-set SECURE crypto map FW_Outside_map 3 match address ASP-Live crypto map FW_Outside_map 3 set peer x.x.x.113 crypto map FW_Outside_map 3 set transform-set SECURE crypto map FW_Outside_map 4 match address Car crypto map FW_Outside_map 4 set peer x.x.x.205 crypto map FW_Outside_map 4 set transform-set SECURE crypto map FW_Outside_map 5 match address Old_HQ crypto map FW_Outside_map 5 set peer x.x.x.2 crypto map FW_Outside_map 5 set transform-set SECURE WG crypto map FW_Outside_map 6 match address Che crypto map FW_Outside_map 6 set peer x.x.x.204 crypto map FW_Outside_map 6 set transform-set SECURE crypto map FW_Outside_map 7 match address Chi crypto map FW_Outside_map 7 set peer x.x.x.212 crypto map FW_Outside_map 7 set transform-set SECURE crypto map FW_Outside_map 8 match address Cla crypto map FW_Outside_map 8 set peer x.x.x.215 crypto map FW_Outside_map 8 set transform-set SECURE crypto map FW_Outside_map 9 match address Eas crypto map FW_Outside_map 9 set peer x.x.x.247 crypto map FW_Outside_map 9 set transform-set SECURE crypto map FW_Outside_map 10 match address Ess crypto map FW_Outside_map 10 set peer x.x.x.170 crypto map FW_Outside_map 10 set transform-set SECURE crypto map FW_Outside_map 11 match address Hud crypto map FW_Outside_map 11 set peer x.x.x.8 crypto map FW_Outside_map 11 set transform-set SECURE crypto map FW_Outside_map 12 match address Gat crypto map FW_Outside_map 12 set peer x.x.x.212 crypto map FW_Outside_map 12 set transform-set SECURE crypto map FW_Outside_map 13 match address Ken crypto map FW_Outside_map 13 set peer x.x.x.230 crypto map FW_Outside_map 13 set transform-set SECURE crypto map FW_Outside_map 14 match address She crypto map FW_Outside_map 14 set peer x.x.x.24 crypto map FW_Outside_map 14 set transform-set SECURE crypto map FW_Outside_map 15 match address North-Office crypto map FW_Outside_map 15 set peer x.x.x.94 crypto map FW_Outside_map 15 set transform-set SECURE crypto map FW_Outside_map 16 match address outside_cryptomap_16 crypto map FW_Outside_map 16 set peer x.x.x.134 crypto map FW_Outside_map 16 set transform-set SECURE crypto map FW_Outside_map 16 set security-association lifetime seconds crypto map FW_Outside_map 17 match address Lit crypto map FW_Outside_map 17 set peer x.x.x.110 crypto map FW_Outside_map 17 set transform-set SECURE crypto map FW_Outside_map 18 match address Mid crypto map FW_Outside_map 18 set peer 78.x.x.110 crypto map FW_Outside_map 18 set transform-set SECURE crypto map FW_Outside_map 19 match address Sp crypto map FW_Outside_map 19 set peer x.x.x.47 crypto map FW_Outside_map 19 set transform-set SECURE crypto map FW_Outside_map 20 match address Tor crypto map FW_Outside_map 20 set peer x.x.x.184 crypto map FW_Outside_map 20 set transform-set SECURE crypto map FW_Outside_map 21 match address Tr crypto map FW_Outside_map 21 set peer x.x.x.75 crypto map FW_Outside_map 21 set transform-set SECURE crypto map FW_Outside_map 22 match address Yo crypto map FW_Outside_map 22 set peer x.x.x.40 crypto map FW_Outside_map 22 set transform-set SECURE crypto map FW_Outside_map 23 match address Tra crypto map FW_Outside_map 23 set peer x.x.x.145 crypto map FW_Outside_map 23 set transform-set SECURE crypto map FW_Outside_map 24 match address outside_cryptomap_24 crypto map FW_Outside_map 24 set peer x.x.x.46 crypto map FW_Outside_map 24 set transform-set SECURE crypto map FW_Outside_map 24 set security-association lifetime seconds crypto map FW_Outside_map 25 match address Nor crypto map FW_Outside_map 25 set peer x.x.x.70 crypto map FW_Outside_map 25 set transform-set SECURE crypto map FW_Outside_map 26 match address Ilk crypto map FW_Outside_map 26 set peer x.x.x.65 crypto map FW_Outside_map 26 set transform-set SECURE crypto map FW_Outside_map 27 match address Nor crypto map FW_Outside_map 27 set peer x.x.x.240 crypto map FW_Outside_map 27 set transform-set SECURE crypto map FW_Outside_map 28 match address ST crypto map FW_Outside_map 28 set peer x.x.x.163 crypto map FW_Outside_map 28 set transform-set SECURE crypto map FW_Outside_map 28 set security-association lifetime seconds crypto map FW_Outside_map 28 set security-association lifetime kilobytes crypto map FW_Outside_map 29 match address Lei crypto map FW_Outside_map 29 set peer x.x.x.4 crypto map FW_Outside_map 29 set transform-set SECURE crypto map FW_Outside_map 30 match address outside_cryptomap_30 crypto map FW_Outside_map 30 set peer x.x.x.34 crypto map FW_Outside_map 30 set transform-set SECURE crypto map FW_Outside_map 31 match address outside_31_cryptomap crypto map FW_Outside_map 31 set pfs crypto map FW_Outside_map 31 set peer Cisco-admin-Peer crypto map FW_Outside_map 31 set transform-set ESP-AES-256-SHA crypto map FW_Outside_map 32 match address outside_32_cryptomap crypto map FW_Outside_map 32 set pfs crypto map FW_Outside_map 32 set peer HQ-SDSL-Peer crypto map FW_Outside_map 32 set transform-set ESP-AES-256-SHA crypto map FW_Outside_map 34 match address outside_cryptomap_34 crypto map FW_Outside_map 34 set peer x.x.x.246 crypto map FW_Outside_map 34 set transform-set ESP-AES-128-SHA ESP-AES-192-SHA ESP-AES-256-SHA crypto map FW_Outside_map 65535 ipsec-isakmp dynamic dynmap crypto map FW_Outside_map interface outside crypto map FW_outside_map 31 set peer x.x.x.45 crypto isakmp identity address crypto isakmp enable outside crypto isakmp policy 9 webvpn enable outside svc enable group-policy ASA-LAN-VPN internal group-policy ASA_LAN-VPN attributes wins-server value 192.168.x.1 192.168.x.2 dns-server value 192.168.x.1 192.168.x.2 vpn-tunnel-protocol IPSec svc split-tunnel-policy tunnelspecified split-tunnel-network-list value Split-Tunnel-ACL default-domain value MYdomain username xxxxxxxxxx password privilege 15 tunnel-group DefaultRAGroup ipsec-attributes isakmp keepalive threshold 30 retry 2 tunnel-group DefaultWEBVPNGroup ipsec-attributes isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.121 type ipsec-l2l tunnel-group x.x.x..121 ipsec-attributes pre-shared-key * isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.202 type ipsec-l2l tunnel-group x.x.x.202 ipsec-attributes pre-shared-key * isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.113 type ipsec-l2l tunnel-group x.x.x.113 ipsec-attributes pre-shared-key * isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.205 type ipsec-l2l tunnel-group x.x.x.205 ipsec-attributes pre-shared-key * isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.204 type ipsec-l2l tunnel-group x.x.x.204 ipsec-attributes pre-shared-key * isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.212 type ipsec-l2l tunnel-group x.x.x.212 ipsec-attributes pre-shared-key * tunnel-group x.x.x.215 type ipsec-l2l tunnel-group x.x.x.215 ipsec-attributes pre-shared-key * tunnel-group x.x.x.247 type ipsec-l2l tunnel-group x.x.x.247 ipsec-attributes pre-shared-key * tunnel-group x.x.x.170 type ipsec-l2l tunnel-group x.x.x.170 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x..8 type ipsec-l2l tunnel-group x.x.x.8 ipsec-attributes pre-shared-key * tunnel-group x.x.x.212 type ipsec-l2l tunnel-group x.x.x.212 ipsec-attributes pre-shared-key * tunnel-group x.x.x.230 type ipsec-l2l tunnel-group x.x.x.230 ipsec-attributes pre-shared-key * tunnel-group x.x.x.24 type ipsec-l2l tunnel-group x.x.x.24 ipsec-attributes pre-shared-key * tunnel-group x.x.x.46 type ipsec-l2l tunnel-group x.x.x.46 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.4 type ipsec-l2l tunnel-group x.x.x.4 ipsec-attributes pre-shared-key * tunnel-group x.x.x.110 type ipsec-l2l tunnel-group x.x.x.110 ipsec-attributes pre-shared-key * tunnel-group 78.x.x.110 type ipsec-l2l tunnel-group 78.x.x.110 ipsec-attributes pre-shared-key * tunnel-group x.x.x.47 type ipsec-l2l tunnel-group x.x.x.47 ipsec-attributes pre-shared-key * tunnel-group x.x.x.34 type ipsec-l2l tunnel-group x.x.x.34 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x..129 type ipsec-l2l tunnel-group x.x.x.129 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.94 type ipsec-l2l tunnel-group x.x.x.94 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.40 type ipsec-l2l tunnel-group x.x.x.40 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.65 type ipsec-l2l tunnel-group x.x.x.65 ipsec-attributes pre-shared-key * tunnel-group x.x.x.70 type ipsec-l2l tunnel-group x.x.x.70 ipsec-attributes pre-shared-key * tunnel-group x.x.x.134 type ipsec-l2l tunnel-group x.x.x.134 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.163 type ipsec-l2l tunnel-group x.x.x.163 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.2 type ipsec-l2l tunnel-group x.x.x.2 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group ASA-LAN-VPN type remote-access tunnel-group ASA-LAN-VPN general-attributes address-pool RAS-VPN authentication-server-group vpn authentication-server-group (outside) vpn default-group-policy ASA-LAN-VPN tunnel-group ASA-LAN-VPN ipsec-attributes pre-shared-key * tunnel-group x.x.x.184 type ipsec-l2l tunnel-group x.x.x.184 ipsec-attributes pre-shared-key * tunnel-group x.x.x.145 type ipsec-l2l tunnel-group x.x.x.145 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.75 type ipsec-l2l tunnel-group x.x.x.75 ipsec-attributes pre-shared-key * tunnel-group x.x.x.246 type ipsec-l2l tunnel-group x.x.x.246 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.2 type ipsec-l2l tunnel-group x.x.x..2 ipsec-attributes pre-shared-key * tunnel-group x.x.x.98 type ipsec-l2l tunnel-group x.x.x.98 ipsec-attributes pre-shared-key * ! ! ! policy-map global_policy description Netflow class class-default flow-export event-type all destination MS-ISA-Server policy-map type inspect dns migrated_dns_map_1 parameters message-length maximum 512 Anyone have a clue because Im on the verge of going postal.....

  Read the article

• Recommendation for PHP-FPM pm.max_children, PHP-FPM pm.start_servers and others

  - by jaypabs

  I have the following server: Intel® Xeon® E3-1270 v2 Single Processor - Quad Core Dedicated Server CPU Speed: 4 x 3.5 Ghz w/ 8MB Smart Cache Motherboard: SuperMicro X9SCM-F Total Cores: 4 Cores + 8 Threads RAM: 32 GB DDR3 1333 ECC Hard Drive: 120GB Smart Cache: 8MB I am using ubuntu 12.04 - nginx, php, mysql with ISPConfig 3. Under ISPConfig 3 website settings: I have this default value: PHP-FPM pm.max_children = 10 PHP-FPM pm.start_servers = 2 PHP-FPM pm.min_spare_servers = 1 PHP-FPM pm.max_spare_servers = 5 PHP-FPM pm.max_requests = 0 My question is what is the recommended settings for the above variable? Because I found some using a different settings.

  Read the article

• MacBook Pro - 7200 vs 5400 rpm drives - Heat and Noise

  - by webworm

  I am looking at a new 15" MacBook Pro for development purposes. I am planning to run a Virtual Machine for about 50% of my work (Windows 7 x64, IIS, SQL Server, and VS 2010). The upgrade from a 5400 rpm drive to a 7200 rpm is only $45. From what I understand the faster rotational speed of the 7200 rpm drive will help virtual machine performance. However, I am concerned that additional heat and fan noise might be an issue. I will be running mostly on A/C power so decreased battery life is not a major concern for me. Since I would be running with a Core i7 processor which gives off a fair amount of heat already I was wondering if it might be best to stay at 5400 rpm for the hard drive. What do you all think? Thanks!

  Read the article

• Home networking problem between power line communication and Ethernet

  - by pixeline

  My network runs through the electrical wiring of the house and is organised as such: Groundfloor: an ADSL+network switch, using DHCP (address : 172.19.3.1) (Mac) PCs connected via an electrical adapter (model: D-Link DHP-200) (1 per PC) First Floor: 1 switch (8 ports) connected via an electrical adapter (model: D-Link DHP-200) (address unknown) 2 Mac PCs connected (via RJ45 network wires) to that router using DHCP The Problem On the first floor, file tranfers between PCs are fast and perfect. But if I try to transfer files from or to a computer on the ground floor, the speed is slow and eventually the transfer dies out. The Question So I suspect the 1st floor switch is creating some kind of barrier (firewall?) preventing external PCs from accessing the PCs it is connected to? Am I right and if so, how could I disable that barrier?

  Read the article

• Apache+Tomcat VS Stand Alone Tomcat or GlassFish

  - by TonyZ

  Hi, I am setting up a Debian server to serve Java web applications. I have done quite a bit of research for several weeks now. Tomcat's web site says it is better to use stand alone Tomcat for speed if you are not clustering. However, I have seen many people suggest that using Apache + Tomcat gives you better security and protection against attacks. Please assume that the process will be running on port 80 as an unprivileged user. I would assume that if you are running a firewall in front the server, Tomcat should be fine. If, however, you just want to run an exposed webserver using Linux firewall, what is the best option? Or maybe someone can recommend another open source web server. I am trying to keep the solution as light as possible as these webapps will be running in containers. All opinions welcome and valued. Thanks, Tony Z

  Read the article

• Windows7 and Virtual PC guest copy/paste intermittent delay

  - by James

  I've been using Virtual PC for some time now and have not had any issues with copy and paste until I upgraded my host to Windows7 64-bit. After the upgrade sometimes when I copy and paste some text there is like a 15-20 second delay before it completes, this is very frustrating when I'm trying to get my work done. The problem seems to be intermittent in nature, it seems to occur when I have not done a copy paste for a while. After the delay occurs copy and paste seem to work at normal speed until I don't copy and paste for a good length of time. My question is, is there any solutions or patches that can fix this copy/paste issue for virtual PC running in a 64-bit windows7 host?

  Read the article

• Virus that tries to brute force attack Active Directory users (in alphabetical order)?

  - by Nate Pinchot

  Users started complaining about slow network speed so I fired up Wireshark. Did some checking and found many PCs sending packets similar to the following: (screenshot) http://imgur.com/45VlI.png I blurred out the text for the username, computer name and domain name (since it matches the internet domain name). Computers are spamming the Active Directory servers trying to brute force hack passwords. It will start with Administrator and go down the list of users in alphabetical order. Physically going to the PC finds no one anywhere near it and this behavior is spread across the network so it appears to be a virus of some sort. Scanning computers which have been caught spamming the server with Malwarebytes, Super Antispyware and BitDefender (this is the antivirus the client has) yields no results. This is an enterprise network with about 2500 PCs so doing a rebuild is not a favorable option. My next step is to contact BitDefender to see what help they can provide. Has anybody seen anything like this or have any ideas what it could possibly be?

  Read the article

• Remote desktop is slow when connecting to a computer which is part of a domain

  - by Peuge

  Hey all, We have two windows 2003 machines, one is a DC and another is joined to the domain of the DC. These machines are not locally available to us so we have to remote desktop into them. When we first got the machines remote desktop was blazing as the machines are only a couple of miles away. I then installed AD and setup routing and remote access, I also setup DNS on the DC. Now when I try remote Desktop into the machine which is part of the domain (not the DC) it is painfully slow! Remote Desktop onto the DC is also noticeably slower! Another problem is that our FTP to the DC has also become slow. I don't know what other information I can provide, as I am new to Sys Admin (moving over from development). The speed should be fast as these machines are only a couple of miles away. Any help / suggestions is greatly appreciated! Thanks Peuge

  Read the article

• How should I force-enable BIND's persistent cache, or Unbound's persistent cache

  - by Jacob Rabinsun

  I am trying to run a local DNS server on my home computer so that I can both increase DNS lookups speed and reduce bandwidth use, so that both my laptop and my PC can do lookups faster. I have got BIND 9 running very smoothly, there is only one simple problem, and that being the fact that BIND is not a persistent DNS cache, and if I restart its service, the whole cash would be wiped out. So, is there a way that I could make BIND9 keep its cache after system restart? Also, which one is better Unbound or BIND? Which one would you suggest? Does Unbound DNS have a persistent cache or can it be enabled?

  Read the article

• OpenVPN slow with Firewall enabled on Zyxel ZyWall USG-100

  - by aleroot

  I have an OpenVPN server on a Linux machine, after installing a ZyWall USG-100 I'm experiencing extremely slowness navigating web servers on my remote LAN through the VPN connection, while accessing the web interface of the ZyWall is fast. I have configured everything : the Virtual Server for the OpenVPN Server, the static route as with the replaced router that I had before installing the ZyWall Today. I even added a rule to the firewall that allows connection to the OpenVPN Server machine : but navigation on the LAN through the VPN still slow, it seems that the Firewall is blocking packages, since if I disable the firewall on the USG-100 everything works fast as usual, while with the firewall enabled it is extremely slow. Why ? Do I need to add some other rule to the firewall to speed up ?

  Read the article

• Re-Calibrate Toshiba battery meter with Windows 7

  - by Mark Henderson

  I have a Toshiba U300 laptop. Back in the olden days (circa-2000) you could re-calibrate the battery meter from the BIOS when your battery was no longer reading accurately. My battery was shot, so I bought a brand new one, however Windows 7 still seems to count down the battery life in at the same speed as the old one did. This time, when it alleged 0%, I turned the laptop back on and got another 90 minutes of life out of it, at 0%. Is there a tool or utility for Toshiba laptops that can fix it back to being accurate? I've read the other threads on SU about cycling the battery but that just doesn't seem to do it in this case. Update: After the last cycle, the battery meter now reads 100% but the indicator on the front of the laptop is still orange (indicating not fully charged)

  Read the article

• ASP.NET Web Server Hardware Configuration

  - by Santa Te Banta

  I'm planning on deploying my ASP.NET Web app in the production environment using a Windows Server 2003 machine. But I know nothing about the CPU brand names and what's best. I know 4 GB RAM, with anything over 3 GHz clock speed will be a good bet and will serve a large number of users. But tell me what's the latest and greatest processor brand-names for running a Windows Server 2003 OS today? And what edition of the Windows 2003 Server do I need out of the following, if I have to run a website to support about 100,000 (a hundred thousand) users, 60% of who are expected to be online at all times? Web Edition Standard Enterprise Datacenter source: http://en.wikipedia.org/wiki/Windows_Server_2003 The article says that the Web edition can only support up to 2 GB of RAM. Will that be sufficient for the above user population?

  Read the article

• Windows 7 Machine Makes Router Drop -All- Wireless Connections

  - by Hammer Bro.

  Some background: My home network consists of my Desktop, a two-month old Windows 7 (x64) machine which is online most frequently (N-spec), as well as three other Windows XP laptops (all G) that only connect every now and then (one for work, one for Netflix, and the other for infrequent regular laptop uses). I used to have a Belkin F5D8236-4 wireless router, and everything worked great. A week ago, however, I found out that the Belkin absolutely in no way would establish a VPN connection, something that has become important for work. So I bought a Netgear WNR3500v2/U/L. The wireless was acting a little sketchy at first for just the Windows 7 machine, but I thought it had something to do with 802.11N and I was in a hurry so I just fished up an ethernet cable and disabled the computer's wireless. It has now become apparent, though, that whenever the Windows 7 machine is connected to the router, all wireless connections become unstable. I was using my work laptop for a solid six hours today with no trouble, having multiple SSH connections open over VPN and streaming internet radio in the background. Then, within two minutes of turning on this Windows 7 box, I had lost all connectivity over the wireless. And I was two feet away from the router. The same sort of thing happens on all of the other laptops -- Netflix can be playing stuff all weekend, but if I come up here and do things on this (W7) computer, the streaming will be dead within ten minutes. So here are my basic observations: If the Windows 7 machine is off, then all connections will have a Signal Strength of Very Good or Excellent and a Speed of 48-54 Mbps for an indefinite amount of time. Shortly after the Windows 7 machine is turned on, all wireless connections will experience a consistent decline in Speed down to 1.0 Mbps, eventually losing their connection entirely. These machines will continue to maintain 70% signal strength, as observed by themselves and router. Once dropped, a wireless connection will have difficulty reconnecting. And, if a connection manages to become established, it will quickly drop off again. The Windows 7 machine itself will continue to function just fine if it's using a wired connection, although it will experience these same issues over the wireless. All of the drivers and firmwares are up to date, and this happened both with the stock Netgear firmware as well as the (current) DD-WRT. What I've tried: Making sure each computer is being assigned a distinct IP. (They are.) Disabling UPnP and Stateful Packet Inspection on the router. Disabling Network Sharing, SSDP Discovery, TCP/IP NetBios Helper and Computer Browser services on the Windows 7 machine. Disabling QoS Packet Scheduler, IPv6, and Link Layer Topology Discovery options on my ethernet controller (leaving only Client for Microsoft Networks, File and Printer Sharing, and IPv4 enabled). What I think: It seems awfully similar to the problems discussed in detail at http://social.msdn.microsoft.com/Forums/en/wsk/thread/1064e397-9d9b-4ae2-bc8e-c8798e591915 (which was both the most relevant and concrete information I could dig up on the internet). I still think that something the Windows 7 IP stack (or just Operating System itself) is doing is giving the router fits. However, I could be wrong, because I have two key differences. One is that most instances of this problem are reported as the entire router dying or restarting, and mine still works just fine over the wired connection. The other is that it's a new router, tested with both the factory firmware and the (I assume) well-maintained DD-WRT project. Even if Windows 7 is still secretly sending IPv6 packets or the TCP Window Scaling implementation that I hear Vista caused some trouble with (even though I've tried my best to disable anything fancy), this router should support those functions. I don't want to get a new or a replacement router unless someone can convince me that this is a defective unit. But the problem seems too specific and predictable by my instincts to be a hardware hiccup. And I don't want to deal with the inevitable problems that always seem to take half a day to resolve when getting a new router, since I'm frantically working (including tomorrow) to complete a project by next week's deadline. Plus, I think in the worst case scenario, I could keep this router connected directly to the modem, disable its wireless entirely, and connect the old Belkin to it directly. That should allow me to still use VPN (although I'll have to plug my work laptop directly into that router), and then maintain wireless connections for all of the other computers. But that feels so wrong to me. Anyone have any ideas what the cause and possible solution could be? Clarifications: The Windows 7 machine is directly connected via an ethernet cable to the router for everything above. But while it is online, all other computers' wireless connections become unusable. It is not an issue of signal strength or interference -- no other devices within scanning range are using Channel 1, and the problem will affect computers that are literally feet away from the router with 95% signal strength.

  Read the article

• RAIDZ vs RAID1+0

  - by Hiro2k

  Hi guys I just got 4 SSDs for my FreeNAS box. This server is only used to serve a single iSCSI extent to my Citrix XenServer pool and was wondering if I should setup them up in a RAIDZ or a RAID 1+0 configuration. This isn't used for anything in production, just for my test lab so I'm not sure which one is going to be better in this scenario. Will I see a major difference in speed or reliability? Currently the server has three 500GB Western Digital Blue drives and it's dog slow when I deploy a new version of our software on it, hence the upgrade.

  Read the article

• Software or Photoshop plugins for professional photo album design

  - by Iain Fraser

  I am a graphic designer (among other things) and I'm used to doing magazine advertisements, brochures, posters and that sort of thing. Recently I was approached by a photographer who wants a graphic designer to produce wedding albums for him. I have already done a couple for him but I'm finding it hard to work by just arranging my layouts in Photoshop alone. It's very time consuming, but quite repetitive - especially when you're dealing with common page layouts. I know a lot of photographers use album design software to speed up the process a bit. What's the industry standard in terms of album design software?

  Read the article

• Queston about torrents

  - by c0mrade

  Why do my torrents go at rate 25/30 kb/s and my regular http downloads rate up to 300 kb/s .. is my ISP to blame for this, I meant torrents have like thousand seeders and again its very slow.How are they blocking torrent speed, can I bypass it? @gekkz Results : * There's no indication that your ISP rate limits all downloads at port 6881. In our test, a TCP download on a BitTorrent port achieved at least 392 Kbps while a TCP download on a non-BitTorrent port achieved at least 223 Kbps. You can find details here. * There's no indication that your ISP rate limits all uploads at port 6881. In our test, a TCP upload on a BitTorrent port achieved at least 314 Kbps while a TCP upload on a non-BitTorrent port achieved at least 191 Kbps. You can find details here.

  Read the article

• Is there a utility that displays hotkeys for the current application?

  - by Alwin

  To speed up my compyuter use I'm trying to use as many hotkeys as possible. But because I'm working in many applications it is really hard to remember all those shortcuts. I'm looking for a program that looks at what application is currently in use by me, and displays a list of possible hotkeys I want to use. Example: I'm writing a document in Word, and the utility program shows a list of hotkeys I could use in Word. With such a program I could learn the shortcut keys much faster. Does such a utility exist?

  Read the article

• using squid for apache?

  - by ajsie

  so i have set up apache serving my php pages. i read about squid but don't understand why/how i should use it to speed up my web server. from what i've learned squid is located in same network (or another) and caches content requested by the web browsers, and then when another web browser wants a same page, squid returns that page cached locally, so it never sends a request to the apache server (faster response time for the client, and reduced load for the server). so it seems that squid is for the client side (web browser), and has nothing to do with the server side (apache). but then some people tell others how they have speeded up apache using squid. so im confused. could squid be used on the server side too? and how will it work?

  Read the article

• Speeding up a search .net 4.0

  - by user231465

  Wondering if I can speed up the search. I need to build a functionality that has to be used by many UI screens The one I have got works but I need to make sure I am implementing a fast algoritim if you like It's like an incremental search. User types a word to search for eg const string searchFor = "Guinea"; const char nextLetter = ' ' It looks in the list and returns 2 records "Guinea and Guinea Bissau " User types a word to search for eg const string searchFor = "Gu"; const char nextLetter = 'i' returns 3 results. This is the function but I would like to speed it up. Is there a pattern for this kind of search? class Program { static void Main() { //Find all countries that begin with string + a possible letter added to it //const string searchFor = "Guinea"; //const char nextLetter = ' '; //returns 2 results const string searchFor = "Gu"; const char nextLetter = 'i'; List<string> result = FindPossibleMatches(searchFor, nextLetter); result.ForEach(x=>Console.WriteLine(x)); //returns 3 results Console.Read(); } /// <summary> /// Find all possible matches /// </summary> /// <param name="searchFor">string to search for</param> /// <param name="nextLetter">pretend user as just typed a letter</param> /// <returns></returns> public static List<string> FindPossibleMatches (string searchFor, char nextLetter) { var hashedCountryList = new HashSet<string>(CountriesList()); var result=new List<string>(); IEnumerable<string> tempCountryList = hashedCountryList.Where(x => x.StartsWith(searchFor)); foreach (string item in tempCountryList) { string tempSearchItem; if (nextLetter == ' ') { tempSearchItem = searchFor; } else { tempSearchItem = searchFor + nextLetter; } if(item.StartsWith(tempSearchItem)) { result.Add(item); } } return result; } /// <summary> /// Returns list of countries. /// </summary> public static string[] CountriesList() { return new[] { "Afghanistan", "Albania", "Algeria", "American Samoa", "Andorra", "Angola", "Anguilla", "Antarctica", "Antigua And Barbuda", "Argentina", "Armenia", "Aruba", "Australia", "Austria", "Azerbaijan", "Bahamas", "Bahrain", "Bangladesh", "Barbados", "Belarus", "Belgium", "Belize", "Benin", "Bermuda", "Bhutan", "Bolivia", "Bosnia Hercegovina", "Botswana", "Bouvet Island", "Brazil", "Brunei Darussalam", "Bulgaria", "Burkina Faso", "Burundi", "Byelorussian SSR", "Cambodia", "Cameroon", "Canada", "Cape Verde", "Cayman Islands", "Central African Republic", "Chad", "Chile", "China", "Christmas Island", "Cocos (Keeling) Islands", "Colombia", "Comoros", "Congo", "Cook Islands", "Costa Rica", "Cote D'Ivoire", "Croatia", "Cuba", "Cyprus", "Czech Republic", "Czechoslovakia", "Denmark", "Djibouti", "Dominica", "Dominican Republic", "East Timor", "Ecuador", "Egypt", "El Salvador", "England", "Equatorial Guinea", "Eritrea", "Estonia", "Ethiopia", "Falkland Islands", "Faroe Islands", "Fiji", "Finland", "France", "Gabon", "Gambia", "Georgia", "Germany", "Ghana", "Gibraltar", "Great Britain", "Greece", "Greenland", "Grenada", "Guadeloupe", "Guam", "Guatemela", "Guernsey", "Guiana", "Guinea", "Guinea Bissau", "Guyana", "Haiti", "Heard Islands", "Honduras", "Hong Kong", "Hungary", "Iceland", "India", "Indonesia", "Iran", "Iraq", "Ireland", "Isle Of Man", "Israel", "Italy", "Jamaica", "Japan", "Jersey", "Jordan", "Kazakhstan", "Kenya", "Kiribati", "Korea, South", "Korea, North", "Kuwait", "Kyrgyzstan", "Lao People's Dem. Rep.", "Latvia", "Lebanon", "Lesotho", "Liberia", "Libya", "Liechtenstein", "Lithuania", "Luxembourg", "Macau", "Macedonia", "Madagascar", "Malawi", "Malaysia", "Maldives", "Mali", "Malta", "Mariana Islands", "Marshall Islands", "Martinique", "Mauritania", "Mauritius", "Mayotte", "Mexico", "Micronesia", "Moldova", "Monaco", "Mongolia", "Montserrat", "Morocco", "Mozambique", "Myanmar", "Namibia", "Nauru", "Nepal", "Netherlands", "Netherlands Antilles", "Neutral Zone", "New Caledonia", "New Zealand", "Nicaragua", "Niger", "Nigeria", "Niue", "Norfolk Island", "Northern Ireland", "Norway", "Oman", "Pakistan", "Palau", "Panama", "Papua New Guinea", "Paraguay", "Peru", "Philippines", "Pitcairn", "Poland", "Polynesia", "Portugal", "Puerto Rico", "Qatar", "Reunion", "Romania", "Russian Federation", "Rwanda", "Saint Helena", "Saint Kitts", "Saint Lucia", "Saint Pierre", "Saint Vincent", "Samoa", "San Marino", "Sao Tome and Principe", "Saudi Arabia", "Scotland", "Senegal", "Seychelles", "Sierra Leone", "Singapore", "Slovakia", "Slovenia", "Solomon Islands", "Somalia", "South Africa", "South Georgia", "Spain", "Sri Lanka", "Sudan", "Suriname", "Svalbard", "Swaziland", "Sweden", "Switzerland", "Syrian Arab Republic", "Taiwan", "Tajikista", "Tanzania", "Thailand", "Togo", "Tokelau", "Tonga", "Trinidad and Tobago", "Tunisia", "Turkey", "Turkmenistan", "Turks and Caicos Islands", "Tuvalu", "Uganda", "Ukraine", "United Arab Emirates", "United Kingdom", "United States", "Uruguay", "Uzbekistan", "Vanuatu", "Vatican City State", "Venezuela", "Vietnam", "Virgin Islands", "Wales", "Western Sahara", "Yemen", "Yugoslavia", "Zaire", "Zambia", "Zimbabwe" }; } } } Any suggestions? Thanks

  Read the article

• Server performance worsened after a hardware upgrade: how should I reconfigure the server?

  - by twick

  I'm running a site on an Ubuntu/Apache/Django/PostgreSQL stack. We upgraded our server recently from 1 processor with 2 Gb total RAM (with 0.5 Gb of that RAM assigned to memcached) to a new server that has 2 processors with 4 Gb total RAM (with 2 Gb of that RAM assigned to memcached). However, when I looked at Google Webmaster Tools, I found out that the average page speed has worsened from 5 seconds to 15 seconds. Why would performance get worse with a hardware upgrade? What should I check and tune? Is this more likely to be a problem with memcached, Apache, Django, or PostgreSQL?

  Read the article

• What is the fastest MD5 sum calculator?

  - by netvope

  I tested the speed of md5sum on a few Ubuntu 8.04 servers Pentium III 700 MHz: 52 MB/s Atom 1.6 GHz, 32-bit: 119 MB/s Core 2 (Yorkfield) 2.5GHz, 32-bit: 194 MB/s Core 2 (Yorkfield) 2.5GHz, 64-bit: 222 MB/s Then I downloaded a tool (by apt-get install) called md5deep and found that it's roughly 20% faster (as tested on the 32-bit Core 2 server). This makes me feel that the "vanilla" md5sum included in Ubuntu isn't the fastest one. Questions: Other than md5deep, are you aware of any MD5 calculators that are potentially faster than md5sum? (Answers for software from other OS are also welcomed.) If I want to compile md5sum myself, where can I download the source? What compiler options would you suggest for the Core 2 server? (note: gcc 4.2.4 in Ubuntu 8.04 does not seem to support -march=core2)

  Read the article

• Sony Vaio E14 upgraded to Windows 8.1 has fan on full all the time

  - by dav_i

  Having a bit of a nightmare after upgrading to 8.1 - the fan is constantly on maximum. This question and other sources around the net suggest upgrading the AMD driver. I have upgraded both the graphics drivers as far as I can: AMD Radeon HD 7600M - v13.150.102.0 Intel HD Graphics 4000 - v10.18.10.3316 and I am still having the issue. I'm at a lost as to what to do now! Any help would be greatly appreciated. Update Upgrading the AMD Radeon HD 7600M Series driver to 13.152.1.1000 seems to have fixed the issue on startup - however, putting the laptop to sleep and resuming causes the fan to go full speed at all times again.

  Read the article

• Suggestions for programming language and database for a high end database querying system (>50 milli

  - by mmdave

  These requirements are sketchy at the moment, but will appreciate any insights. We are exploring what would be required to build a system that can handle 50 database million queries a day - specifiically from the programming language and database choice Its not a typical website, but an API / database accessing through the internet. Speed is critical. The application will primarily receive these inputs (about a few kb each) and will have to address each of them via the database lookup. Only a few kb will be returned. The server will be run over https/ssl.

  Read the article

• Using the Juniper EX3300 Switch as a router?

  - by Richard Whitman

  I have a Juniper EX3300 switch in a data center. And I have connected one of the uplink ports (ge-0/1/0) to my ISP's router. I want to configure it so that all the devices connected to ports in the same VLAN as ge-0/1/0 can access the Internet. I have done some research, and I haven't gotten anywhere really. I have configured the interface as follows: ge-0/1/0 { ether-options { no-auto-negotiation; link-mode full-duplex; speed { 1g; } } unit 0 { family inet { address xx.xx.xx.xx/32; } } } where xx.xx.xx.xx is the "Customer Router Port IP" assigned by my ISP. When I try to commit, I get the following error: Interface ge-0/1/0.0 not enabled for switching Can some one tell me what is the right way to configure it?

  Read the article

• SQL Server & Disk Space

  - by Dismissile

  I created a database on a local SQL server that we use for development. I created the log and data files on a second hard drive (E:\MSSQL\DATA). I am using this database to do some speed tests so I created a lot of data (7 Million rows). I started running some pretty intensive queries and to get some test data I ran an update statement that updated all 7 million rows and now it has taken up all of the space on my C:\, which I don't understand since I put the data files on the E:\. Is there some files on the C:\ that would be growing based on me running queries on this other database, if so how do I stop it? I am doing with this database but I need to get my C:\ back in order. The database file group was PRIMARY, is this relevant?

  Read the article

< Previous Page | 136 137 138 139 140 141 142 143 144 145 146 147  | Next Page >