Search Results

Search found 4110 results on 165 pages for 'vm'.

Page 140/165 | < Previous Page | 136 137 138 139 140 141 142 143 144 145 146 147  | Next Page >

  • windows 2003 under Hyper-V - can't send/receive ping

    - by glaucon
    I've installed Windows 2003 x64 R2 SP2 under Hyper-V (the Windows Pro 8 edition). I have a NIC configured but I can't move any traffic on it. In particular I can't send or receive Pings. Scoreboard There is a second VM running Ubuntu under the Windows 8 host which is able to send and receive pings from the host O/S . When I try to ping from Windows 2003 guest to Windows 8 host I get 'Request Timed Out'. When I try to ping from Windows 8 host to Windows 2003 guest I get 'Reply from 192.168.10.107 Destination Host Unreachable'. There's no problem pinging from the Ubuntu guest to the Windows 8 host and no problem pinging from the Windows 8 host to the Unbuntu guest. Environment Integration services are installed on Windows 2003. The windows 2003 needs a static IP address of 192.168.10.15. The Windows 2003 ipconfig output looks like this : While the host o/s ipconfig output looks like this : Event Logs The only things I can see in the event logs which is (a) looks signifcant and (b) is not related to the lack of networking is this : I'm not sure if that's significant or not. Hyper-V and NICs When the Windows 2003 guest was first booted it had no NIC; I subsequently added a 'Legacy Network Connector' which I couldn't get Windows 2003 to recognise; I subsequently removed that and added a 'Standard Network Connector' and at least on the surface this works ... only it doesn't. 'Virtual Network Type' is external. Although I've only mentioned ping there's no other evidence of network activity. 'Allow incoming echo request' is enabled on the Windows 2003 guest. HELP ? What else should I look at or do to resolve this problem ? EDIT 1: I should have said that I turned off the firewall on the W2003 server for a while and retested the pings; same result.

    Read the article

  • Find out the type of an automounted device

    - by Steve Bennett
    I'm working on a system (Ubuntu Precise) with a mount defined in /etc/fstab as follows: /dev/vdb /mnt auto defaults,nobootwait,comment=cloudconfig 0 2 Originally I just wanted to find out if it's NFS (due to potential MySQL locking issues). Judging from man mount, it's not: If no -t option is given, or if the auto type is specified, mount will try to guess the desired type. Mount uses the blkid library for guessing the filesystem type; if that does not turn up anything that looks familiar, mount will try to read the file /etc/filesystems, or, if that does not exist, /proc/filesystems. All of the filesystem types listed there will be tried, except for those that are labeled "nodev" (e.g., devpts, proc and nfs). If /etc/filesystems ends in a line with a single * only, mount will read /proc/filesystems afterwards. But, out of curiosity now, how can I find out more about what type of device it actually is? (For context, this is a VM running on OpenStack. The device is a 60Gb allocation mounted from somewhere - but I don't know how.)` EDIT Including answers here: $ mount /dev/vdb on /mnt type ext3 (rw,_netdev) $ df -T /dev/vdb ext3 61927420 2936068 55845624 5% /mnt

    Read the article

  • Munin with postgresql 9.2

    - by jreid9001
    I am trying to set up Munin to collect stats on a server with postgresql 9.1 and 9.2 (the server is currently running 9.1, have tested on a fresh VM with 9.2 to rule out some weird problem on the running server. I had to patch some of the plugins for 9.2 due to renamed columns (e.g. procpid to pid), but that's no problem). Munin is installed from the EPEL repos, postgres from the official one. Both up to date. When I try to run munin-node-configure --suggest, I get this output: # The following plugins caused errors: # postgres_bgwriter: # Junk printed to stderr # postgres_cache_: # Junk printed to stderr # postgres_checkpoints: # Junk printed to stderr # postgres_connections_: # Junk printed to stderr # postgres_connections_db: # Junk printed to stderr # postgres_locks_: # Junk printed to stderr # postgres_querylength_: # Junk printed to stderr # postgres_scans_: # Junk printed to stderr # postgres_size_: # Junk printed to stderr # postgres_transactions_: # Junk printed to stderr # postgres_tuples_: # Junk printed to stderr # postgres_users: # Junk printed to stderr # postgres_xlog: # Junk printed to stderr After a lot of searching around, I edited /etc/munin/plugin-conf.d/munin-node and added the following: [postgres*] user postgres This stops munin-node-configure complaining about stderr and lets me add the plugins, but when I telnet to the server on 4949 and try to fetch the stats, I just get "Bad exit". When I run the plugin individually via munin-run (e.g. munin-run postgres_size_ALL ), it works completely fine. Looking at /var/log/munin/munin-node.log, this is the output: Error output from postgres_size_ALL: DBI connect('dbname=template1','',...)failed: could not connect to server: Permission denied Is the server running locally and accepting connections on Unix domain socket "/tmp/.s.PGSQL.5432"? at /usr/share/perl5/vendor_perl/Munin/Plugin/Pgsql.pm line 377 Service 'postgres_size_ALL exited with status 1/0. I am now out of ideas... the socket definitely exists, and pg_hba.conf is set to allow all users/databases from localhost with trust.

    Read the article

  • Symantec Endpoint Protection Virus Definitions

    - by Gus Denton
    I have done some Googling but I cannot get a definitive answer certainly not from the Symantec KB. I have a Virtualised Win 2003R2 server 32bit. It has been provisioned to me with Symantec Endpoint Protection 11.0.62xxx CLIENT (not a definitions server) the directory C:\Program Files\Common Files\Symantec Shared\VirusDefs is 750MB IT doesn't contain .tmp directories so it is NOT a corrupt definitions server. IT does contain directories named with a date pattern YYYYMMDD.xxx Some of these folders are 12 months old and I would like to recover the space. The sysmantect forums are full of this stuff but a lot of the postings contain links back to documents that are not specific to End Point Protection Client. It appears that I should be able to delete the older folders and all will be OK. with a service restart however there is a warning about having Live Update Administrator Installed Firstly I have no idea if I have this installed how to I check and secondly can I just ditch these old files and restart ? Regards Gus Denton Learning and Teaching Uni of New South Wales Sydney Australia For those trying to assist me I thankyou. I have followed some instructions found on the Symantec site and assumed that the response from Nixphoe would resolve my issue. It appears that as I am on a provisioned VM from a central IT unit I cannot run the Symantec commands from the Run prompt as my admin creds to get me in. (smc -stop) Basically I need to claw back some Diskspace from the c: drive which is being filed up with WSUS patches and Symantec files. I have managed to delete one symantec cache through the live update control panel and recovered 470Mb I suppose my last question for those more experienced than myself is, can I simply remove say the two oldest virus definition folders without completely foobaring the End Point protection and the server ? Regards Gus

    Read the article

  • Struggling to set-up NLB cluster

    - by Chris W
    I'm trying to set up NLB on a couple of Windows 2008 R2 virtual servers running on top of Hyper V R2. The servers each have a single vNIC for LAN access (and a second vNIC for SAN access). I'm setting up the cluster to use Multicast mode. The vNICs are each set to allow MAC spoofing. Essentially I'm finding that i can add SERVER1 as a host and it will pick up and respond to the cluster IP from a remote subnet. If I then 'stop' the node in NLB manager it still responds when I would expect it to stop answering on that IP. If I recreate the cluster and add SERVER2 as the first host, the wizard completes correctly and an IPCONFIG on the server shows that it now has the cluster IP but I can't ping the cluster IP from a remote subnet but I can from another machine on the same subnet. As a final test - with both servers in the cluster, pinging from another machine on the same subnet I still get a response from the cluster IP when both nodes are stopped according to the NLB manager. The two VMs are sat on the same physical blade and are built up exactly the same as they'll be used as SharePoint web front end servers. I'm at a loss as to what could be wrong with the second VM that prevents it taking on the address just as the sole node in the cluster, never mind the strange behaviour of the cluster when I stop/start nodes.

    Read the article

  • VMWare Newbie - looking for hardware recommendations and help :) [closed]

    - by Dan
    I am looking for some hardware recommendations on an upcoming virtualization project. We are a small company (80 users - 25 in site 1, 55 in site 2) currently using Windows Server 2003 - no VM servers yet. Our AD is setup where site 1 is the root domain and site 2 is a subdomain/subnet - connected by T1 and VPN for failover. The current DC's also server as file servers, print servers, AntiVirus servers. Email is in the cloud. Additionally then in site 1 we have 3 additional member servers - one running IBM Websphere for a customer specific app, one running Infor PowerLink (no real heavy load) and another that we use for Virtual Studio apps and also runs DirSync for Exchange Online. No heavy workloads on any of these machines really. We also have an AS400 box that we run ERP/CRM software on that site 2 connects to over the WAN link. In site 2 we also have a SQL machine that runs on Win2K server. Database files are not large less than 5 GB. Light to Medium workload on this machine. File servers in each site store less than 500 GB data and probably won't grow to more than 1TB in the next 5 years. I am looking to go to VMWare in both sites and virtualize all servers. What recommendations do you have for server, storage hardware? Is it safe to virtualize all of your DC's? Any help or advice would be greatly appreciated. Thanks.

    Read the article

  • Has anyone used tools like (Chef, Salt, Puppet, CfEngine) to configure a 2008 Win Server with Sql?

    - by Development 4.0
    I have been looking into tools to automate the creation of servers. For two different reasons: Production Development machines I love the idea of the immutable server. I have seen the tools demoed and used successfully on *nix boxes running Rails or Lamp etc. Has anyone found a good way to do this in the Microsoft stack? I would like to get in on the fun and create scripts that will install Windows, patch it according to specification, deploy Sql Server create scripts to build out a database and just for fun deploy SharePoint and configure it, and then deploy a SharePoint solution to it. I can get part of the way, install Windows manually, install Sql Server manually, use Powershell to do all the configuration and setup. Install SharePoint and configure part of it, then powershell for the rest of the configuration and deploying a solution. I would love to have the ability to run one script though, or at least one unified process. I can, and have mostly used VM template images and then instantiated them, but the creation of the template is usually a manual step.

    Read the article

  • Flushing iptables broke my pipe, how can I save my instance?

    - by Niels
    I was setting up my iptables when I performed a iptables -F and my ssh pipe broke. This is the last output of my session: root@alfapaints:~# iptables -L Chain INPUT (policy DROP) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT tcp -- anywhere anywhere state NEW,ESTABLISHED tcp dpt:2222 ACCEPT tcp -- li465-68.members.linode.com anywhere state NEW,ESTABLISHED tcp dpt:nrpe ACCEPT tcp -- anywhere anywhere tcp dpt:9200 state NEW,ESTABLISHED ACCEPT tcp -- anywhere anywhere tcp dpt:http state NEW,ESTABLISHED ACCEPT udp -- anywhere anywhere udp spt:domain Chain FORWARD (policy DROP) target prot opt source destination Chain OUTPUT (policy DROP) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT tcp -- anywhere anywhere state ESTABLISHED tcp spt:2222 ACCEPT tcp -- anywhere anywhere state ESTABLISHED tcp spt:nrpe ACCEPT tcp -- anywhere anywhere tcp spt:9200 state ESTABLISHED ACCEPT tcp -- anywhere anywhere tcp spt:http state ESTABLISHED ACCEPT udp -- anywhere anywhere udp dpt:domain root@alfapaints:~# iptables -F Write failed: Broken pipe I tested my connection just before and I was able to connect with ssh. Now I did a nmap scan and not a single port is open anymore. I know my VPS is running on VMWare ESXi, could a reboot help? Or if not could I attach and mount the disk to another vm to save the data? Does anybody have some advise? And maybe an explanation what happend or what could have cause my pipe to break? ps: I didn't save my rules on the config directories of iptables. But used a file I stored in ~/rules.config to apply my rules like this: iptables-restore < rules.config So probably a reboot would help? Thanks a lot in advance.

    Read the article

  • Why am I seeing MailSlot Browse messages on unrouted ports of my Linux box?

    - by nmichaels
    I have a Linux box (Debian squeeze) with several NICs. The ones of interest are: eth3 - my main link to the network (dhcp on 10.20.30.0/24) eth0 - the first connection to my test network (static: 192.168.1.2) eth4 - the second connection to my test network (static: 192.168.1.1) My routing table looks like this: $ sudo route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.20.30.0 * 255.255.255.0 U 0 0 0 eth3 default 10.20.30.254 0.0.0.0 UG 0 0 0 eth3 I have the 2 test net ports connected to each other with a crossover cable and an instance of wireshark running on each port. Every once in a while, I'll see a packet like the following show up. Who could be doing this, and how do I convince them to stop? I do have Samba running on the machine (for a cifs mount) but don't see why it would be sending packets out to unrouted ports. I had a Windows VM running in VMWare Client and thought that might be causing it, but it still happens without it. What I want is totally silent interfaces so I can run some tests with Scapy over them.

    Read the article

  • Installing Tomcat on CentOS 5

    - by andybaird
    Disclaimer: I am not a server admin, I am a windows user that has lead a life of sinful installation wizards and drag and drop I'm attempting to install Tomcat on CentOS 5 hosted by a MediaTemple dedicated virtual server. I basically followed this guide: Installed jpackage and configured the yum.repo.d jpackage file to set enabled=1 Used yum to install java (yum install java) Downloaded the binary distribution of tomcat with "wget http://archive.apache.org/dist/tomcat/tomcat-6/v6.0.14/bin/apache-tomcat-6.0.14.tar.gz" set JAVA_HOME to point at the jdk location I found with "export JAVA_HOME=/usr/lib/jvm/java-1.6.0-openjdk-1.6.0.0/" I gunzip/untar the Tomcat files and run ./startup.sh to start the Tomcat server. That is supposed to put the Tomcat server at myserver.com:8080 - however, I just get a could not contact host error when I try to browse to it (or when I try 'curl localhost:8080' from SSH) After I type ./startup.sh, here is the console output: [root@myserver bin]# ./startup.sh Using CATALINA_BASE: /root/apache-tomcat-6.0.14 Using CATALINA_HOME: /root/apache-tomcat-6.0.14 Using CATALINA_TMPDIR: /root/apache-tomcat-6.0.14/temp Using JRE_HOME: /usr/lib/jvm/java-1.6.0-openjdk-1.6.0.0/ [root@myserver bin]# Is there a step I have missed here? Edit: I've now discovered by looking at the log the following error is occuring: Error occurred during initialization of VM Could not reserve enough space for object heap

    Read the article

  • VNC failure on Xen

    - by BCable
    The following config works and creates a good VM in Xen: # Kernel Setup kernel = "/boot/vmlinuz-2.6.18.8-xenU" # Memory memory = "256" # Disk disk = [ "file:/opt/xen/domains/110/sda1.img,sda1,w", "file:/opt/xen/domains/110/swap.img,sda2,w" ] # container name name = "110" hostname = "boo" # Networking vif = ["type=ieomu, bridge=xenbr0"] # VNC vnc = 1 #vfb = [ 'type=vnc,vncdisplay=2,vnclisten=0.0.0.0,vncpasswd=110' ] # Behavior Settings root = "/dev/sda1" extra = "fastboot" But when I uncomment the VFB line, I get the following error after it hangs for at least 30 seconds: [root@customer 110]# xm create boo.cfg Using config file "./boo.cfg". Error: Device 0 (vkbd) could not be connected. Hotplug scripts not working. Any ideas? Part two of this question: Sometimes it actually works, and a port is opened. When this happens, nmap shows the VNC ports open and I can connect via the VNC client, but it just hangs at "Connection established." and no VNC display shows up. I've tried multiple VNC clients (TightVNC, TightVNC Java Console, RealVNC), but they all fail to connect. Does VNC through Xen require X to be started in order to function? I was under the impression that it would show the console screen, so I'm confused as to why all these issues are occurring. Thanks!

    Read the article

  • Integrated Graphics went kaput, can I switch to dedicated graphics if I can't get into the BIOS

    - by Om Nom Nom
    I have an 8 year old computer (Pentium 4 1.6 GHz, 256 MB DDR RAM) which is not turning on (it beeps for 10 seconds and then goes off). Nothing appears on the screen, so I can't get into the BIOS. A computer repair person listened to the beeping pattern and told me that its because of the integrated graphics on the motherboard is defective. It's an ASUS P4S333-VM motherboard and the graphics solution is SiS 650. He tried putting in a PCI graphics card expecting that the computer will use that instead and ignore the integrated graphics, but apparently older computers don't switch automatically to the dedicated graphics card; it needs to be changed from the BIOS. But, I can't get inside the BIOS settings as I already said. I am told that the only option now is to replace the motherboard (which is not feasible since it's very old now). So, is there any way to make the computer use the PCI graphics card? IIRC, the motherboard also has an AGP port, but I think that it will also need to be selected from the BIOS?

    Read the article

  • EFI vs MBR - Installing Windows Server 2008 R2 or 2012 on 8TB

    - by Riaan de Lange
    I'm having some difficulty installing Windows Server 2008 R2 and Windows Server 2012 on an Intel Server platform. The server specs is as follows: Intel Grizzly Pass Server System - R2308GZ4GC 2x Intel Xeon 2620 - 2.0 GHZ - BX80621E52620 132 GB of Memory REG-DIMM - TS1GKR72V6H 4x Seagate Constellation ES 2TB 3.5" 7200rpm 6GB/S - ST32000645NS Intel Big Laurel 4CH 6G SAS RAID 512MB - RS2BL040 On the Intel RAID Controller Setup, I have setup the HDD to be in RAID-0 - for testing purposes. (Ultimately configured in RAID-5) So, the total size of HDD space I can use is 7.6 TB something... When I install the Server OS's, they don't seem to go beyond 2 TB (1.76 TB) I have read up on EFI and UEFI boot, and this seems to work in 2012, but I could not install any drivers for the motherboard... So, I also tried EFI for 2008R2, and this worked while installing the OS, it did not however work with the Windows Boot Manager option in the BIOS. It kept on freezing once it tries to load the partition. My idea was to allocate the complete 8 TB for the OS, and load a few VM's on there. I have now started with a new approach where I'll have a 256 GB OS Partition, and a secondary 7.5 TB Data partition. Oh, and I also did a diskpart - convert disk to gpt whilst installing 2008R2. The whole disk was accessible, 7.6TB Can anyone please clarify that EFI/UEFI is meant for larger boot volumes? Bigger than 2TB. If I were to have an ideal situation where my OS is run on a SSD, 256GB, and I can attach the 8 TB drives as normal disk to the OS? I'm I correct in saying that if I wanted to boot from a 8TB partition, I would need to force the BIOS to boot from EFI? The limit for MBR is 2 TB as far as I know now... *FYI: The motherboard is EFI-ready

    Read the article

  • Sharepoint/WSS Reporting Services Integration woes

    - by mhollers
    after a number of failed attempts i seem to have successfully installed the Reporting services add-in to my WSS farm. However, I seem to be missing most of the enhanced functionality eg no report library template, no report center site template. the only additional functionality available is the report viewer web part. background: 2 server WSS 3.0 farm with CA (Central admin) WFE (web front end) and reporting services addin installed on 1, and SQL05 SP2 with Reporting services (RS) and all databases installed on other. I have a VM environment set up and have rolled this back and repeated a number of times. I have configured RS within CA and activated 'Report Server INtegration Feature'. Within the 'site settings' I have a 'Reporting Services' heading with a 'manage shared schedules' item/link, not sure if there should be other options? I was of the understanding that to view reports within sharepoint i could either create a new site using the 'report center' template or add a report library to an existing site, neither of which seems available I am at a loss as to what to do, as all online information seems to do with dealing with installation issues/errors, which i seem to have eventually got past

    Read the article

  • Selenium server won't start

    - by moff
    I'm getting the following error when trying to start selenium: C:\Temp\selenium-server-1.0.3java -jar selenium-server.jar 22:02:07.615 INFO - Java: Sun Microsystems Inc. 16.0-b13 22:02:07.617 INFO - OS: Windows 7 6.1 x86 22:02:07.625 INFO - v2.0 [a2], with Core v2.0 [a2] 22:02:07.811 INFO - RemoteWebDriver instances should connect to: http://127.0.0. 1:4444/wd/hub 22:02:07.813 INFO - Version Jetty/5.1.x 22:02:07.815 INFO - Started HttpContext[/selenium-server/driver,/selenium-server /driver] 22:02:07.817 INFO - Started HttpContext[/selenium-server,/selenium-server] 22:02:07.818 INFO - Started HttpContext[/,/] 22:02:07.866 INFO - Started org.openqa.jetty.jetty.servlet.ServletHandler@2bbd86 22:02:07.867 INFO - Started HttpContext[/wd,/wd] 22:02:07.870 WARN - Failed to start: [email protected]:4444 Exception in thread "main" org.openqa.jetty.util.MultiException[java.net.SocketE xception: Unrecognized Windows Sockets error: 0: JVM_Bind] at org.openqa.jetty.http.HttpServer.doStart(HttpServer.java:686) at org.openqa.jetty.util.Container.start(Container.java:72) at org.openqa.selenium.server.SeleniumServer.start(SeleniumServer.java:3 96) at org.openqa.selenium.server.SeleniumServer.boot(SeleniumServer.java:23 4) at org.openqa.selenium.server.SeleniumServer.main(SeleniumServer.java:19 8) java.net.SocketException: Unrecognized Windows Sockets error: 0: JVM_Bind at java.net.PlainSocketImpl.socketBind(Native Method) at java.net.PlainSocketImpl.bind(Unknown Source) at java.net.ServerSocket.bind(Unknown Source) at java.net.ServerSocket.(Unknown Source) at org.openqa.jetty.util.ThreadedServer.newServerSocket(ThreadedServer.j ava:391) at org.openqa.jetty.util.ThreadedServer.open(ThreadedServer.java:477) at org.openqa.jetty.util.ThreadedServer.start(ThreadedServer.java:503) at org.openqa.jetty.http.SocketListener.start(SocketListener.java:204) at org.openqa.jetty.http.HttpServer.doStart(HttpServer.java:716) at org.openqa.jetty.util.Container.start(Container.java:72) at org.openqa.selenium.server.SeleniumServer.start(SeleniumServer.java:3 96) at org.openqa.selenium.server.SeleniumServer.boot(SeleniumServer.java:23 4) at org.openqa.selenium.server.SeleniumServer.main(SeleniumServer.java:19 8) Java is installed: C:\Temp\selenium-server-1.0.3java -version java version "1.6.0_18" Java(TM) SE Runtime Environment (build 1.6.0_18-b07) Java HotSpot(TM) Client VM (build 16.0-b13, mixed mode, sharing) Thanks in advance

    Read the article

  • Windows Server 2008 R2 RAS VPN: access server on internal interface ip

    - by Mathias
    short question: I'm usually a linux admin but need to setup a Win2k8 R2 server for a student project. The server is running as VM on a root server and has a public internet IP assigned. Additionally I need a VPN server to access some services running on the server. I managed to set up a working VPN gateway via the Routing and RAS service which assigns clients an IP in the private subnet 192.168.88.0/24 with the Interface "Internal" listening on 192.168.88.1. Additionally I set up the external interface as NAT interface. So I can connect to the VPN server, get an IP assigned and the server additionally does NAT and I can access the internet over the VPN connection. The only thing I additionally need, is that I can access the server itself over that internal IP (e.g. client 192.168.88.2, server 192.168.88.1) as I want to access some services which I don't like to expose to the internet and restrict them to connected VPN clients. Does anybody have a hint, which configuration I'm missing here to be able to access the server over the VPN connection? EDIT: VPN clients get assigned the IP from the private subnet with subnetmask 255.255.255.255, I guess that might be the reason I can't access the server on the private IP address although it's in the same network range. Any ideas how to change this? I defined a static address pool in the Routing and RAS service, but I can't change the netmask there. EDIT2: I can't access the server from the client, but I can fully access the client from the server (ping, HTTP). I guess it has to do with firewall configuration. Thanks in advance, Mathias

    Read the article

  • How do I install the evaluation version of Windows Server 2012R2 VHD within a Windows Server 2008R2 Hyper-V system?

    - by Paul Hale
    I have a windows server 2008R2 running hyper-v. I have downloaded the Windows Server 2012RC DC Version from here... http://technet.microsoft.com/en-us/evalcenter/dn205286.aspx I am "forced" to install a download app that copy's a .vhd file to my chosen directory. The instructions on this page... http://technet.microsoft.com/library/dn303418.aspx say... To install the VHD Download the VHD file. Start Hyper-V Manager. On the Action menu, select Import Virtual Machine. Navigate to the directory that the virtual machine file was extracted to and select the directory (not the directory where the VHD file is located). Select the Copy the virtual machine option. Confirm that the import was successful by checking Hyper-V Manager. Configure the network adapter for the resulting virtual machine: right-click the virtual machine and select Settings. In the left pane, click Network Adapter. In the menu that appears, select one of the network adapters of the virtualization server, and then click OK. Start the virtual machine. Where it says "Navigate to the directory that the virtual machine file was extracted to and select the directory (not the directory where the VHD file is located). Select the Copy the virtual machine option." Well nothing has been extracted as far as I can tell? and if it has, I have no idea where or what im looking for? I tried creating a new VM and using the downloaded .vhd file but I got an error saying that the .vhd file is an incompatible format. Can anybody help me out please? Thanks, Paul

    Read the article

  • Thin client - cloud machine - to run via iPad, iPhone, most Androids etc

    - by Carl Lindberg
    I'm tired of having a laptop macbook that breaks down or having files that I need to sync via dropbox etc all the time via the machines to different OS installations. It sucks. I want a thin client where I can login on any machine - my iPhone, PC desktop, iPad etc to one running machine. I would like to replace a modernly powerful desktop iMac with a thin client running via my iPad. I will connect the iPad with a keyboard/mouse too so you get the idea. But I want to be able to use some of the Android phones as well (I guess most Android phones today has a good enough performance/resolution etc to run a thin client). Of course it has to be able to have input/output in sound. Printing can be solved by PDF/emailing etc - so no direct communication to the printer ports to USB etc is necessary. Is there such a service today? It should cost somewhere under something like $40/ month. I will run stuff like CPU heavy duty ableton for music production, xCode for making iOS apps, some games etc. And on the thin client also run virtual machines. VM of Ubuntu and Windows.

    Read the article

  • Virtual machines interconnection inside Proxmox 2.1 Cluster

    - by Anton
    We have 3 physical servers (each with 1 NIC) in different datacentres, all of them are interconnected by openvpn bridged private network (10.x.x.x). Inside this network we have fully functional 3 nodes Proxmox 2.1 cluster. So, actually question is: Is there any "proper" way to make "global" local network (172.16.x.x) for all VMs inside cluster, so even if we move VM from one node to other we could reach it by static IP regardless of it's physical location? BTW, we can't add dedicated NIC to each server. Thanks in advance. EDIT: I have tried to make a separate openvpn bridge for 172.16.x.x, now I have at each server two interfaces: SRV1: openvpnbr1 - 172.16.13.1 vmbr0 - 172.16.1.1 SRV2: openvpnbr1 - 172.16.13.2 vmbr0 - 172.16.2.1 But now there is no connection between those ifaces: SRV1: ping 172.16.13.2 From 172.16.1.1 icmp_seq=2 Destination Host Unreachable SRV2: ping 172.16.13.1 From 172.16.2.1 icmp_seq=2 Destination Host Unreachable If I shut down vmbr0 interfaces, so there is connection between servers over openvpn, but vmbr0 is used by Proxmox... Where I am wrong?

    Read the article

  • VMware Fusion won't boot my Boot Camp partition

    - by Sean
    I have a Boot Camp partition on my MacBook that I would ultimately like to convert to a VMware virtual machine image. I've installed VMware Fusion and tried to start up my Boot Camp install using the Boot Camp button on the initial welcome screen. It brings up the "VMware Fusion is preparing your Boot Camp partition to run as a virtual machine" dialog, but afterward it shows an error dialog with the following message: Boot Camp partition preprocessing failed. You may not be able to boot your Boot Camp partition as a virtual machine. It then tries to boot the new VM, but it blue screens during the boot process. The info on the blue screen doesn't provide much in the way of help though. Running chkdsk has no effect. After searching around, some people recommended using VMware's stand-alone converter utility from within Windows to create an image, but the utility said it couldn't create an image because my disk uses a GUID Partition Table (GPT). I'm wondering if this is why it can't boot my BC partition from Fusion. Has anyone else run into this and found a fix?

    Read the article

  • Is it possible to install all packages from an APT repository?

    - by Kristoffer Hagen
    Is it possible to install all packages from an APT repository? I know it is possible to do it manually, but then you would need to know all the package names, and I don't. Any suggestions? Thanks. Update: Well, you guys are going to kill me for this, but the reason for my madness is that I want to install all the packages from BackTrack into my Ubuntu installation. I really don't like the idea of having it in a VM and having a separate partition for it is even more out of the question. I know that the folks at BackTrack doesn't like it when people leech their repositories, but that's what you get for releasing open source software. Stupid? maybe.. A valid reason? probably not.. Do I still want it? Yes. Another edit: I have now given up on this as it seems impossible to get it to work even by manually installing packages.

    Read the article

  • VNC on Xen failure

    - by BCable
    The following config works and creates a good VM in Xen: # Kernel Setup kernel = "/boot/vmlinuz-2.6.18.8-xenU" # Memory memory = "256" # Disk disk = [ "file:/opt/xen/domains/110/sda1.img,sda1,w", "file:/opt/xen/domains/110/swap.img,sda2,w" ] # container name name = "110" hostname = "boo" # Networking vif = ["type=ieomu, bridge=xenbr0"] # VNC vnc = 1 #vfb = [ 'type=vnc,vncdisplay=2,vnclisten=0.0.0.0,vncpasswd=110' ] # Behavior Settings root = "/dev/sda1" extra = "fastboot" But when I uncomment the VFB line, I get the following error after it hangs for at least 30 seconds: [root@customer 110]# xm create boo.cfg Using config file "./boo.cfg". Error: Device 0 (vkbd) could not be connected. Hotplug scripts not working. Any ideas? Part two of this question: Sometimes it actually works, and a port is opened. When this happens, nmap shows the VNC ports open and I can connect via the VNC client, but it just hangs at "Connection established." and no VNC display shows up. I've tried multiple VNC clients (TightVNC, TightVNC Java Console, RealVNC), but they all fail to connect. Does VNC through Xen require X to be started in order to function? I was under the impression that it would show the console screen, so I'm confused as to why all these issues are occurring. Thanks!

    Read the article

  • Exchange 2007 relay from sendmail, message "Undelivered". Possible reasons?

    - by garlicman
    Note: This is my re-post from Stackoverflow. I've been messing with a test environment for security purposes where a DMZ RHEL5 sendmail server is used as a relay for an Exchange 2007 server. Exchange is working in the environment, I have Vista and XP VMs using Outlook on the Domain to send e-mail to each other. I've been trying to simulate an external internet VM sending an e-mail to the DMZ sendmail relay, which forwards to the Exchange server. Before everyone thinks this is too big a problem/question, I've followed the sendmail/Exchange guides and all I want to know is how I can determine why a relayed message/e-mail in Exchange is "Undelivered". Basically I send a SMTP message to the sendmail server, which relayed to my Exchange. The /var/log/maillog shows the e-mail being relayed to Exchange. Nov 17 13:41:22 externalmailserver sendmail[9017]: pAHIfMuW009017: from=<[email protected]>, size=1233, class=0, nrcpts=1, msgid=<[email protected]>, proto=ESMTP, daemon=MTA, relay=[10.50.50.1] Nov 17 13:42:17 externalmailserver sendmail[9050]: pAHIfMuW009017: to=<[email protected]>, delay=00:00:55, xdelay=00:00:36, mailer=relay, pri=121233, relay=mailserver.xyz.local. [192.168.1.20], dsn=2.0.0, stat=Sent (<[email protected]> Queued mail for delivery) This is good, but the To never receives the e-mail from Exchange. So I started poking around Exchange. In the "Message Tracking" Troubleshooting Assistant I queried the processed messages and found this: (I had to copy and paste the cells... sorry for the format) 2011/11/17 RECEIVE SMTP <[email protected]> "Undelivered Mail Returned to Sender" [email protected] [email protected] 192.168.100.10 MAILSERVER\DMZ Relay [email protected] I just want to know if anyone has any suggestions on why the DMZ Relay Connector I setup isn't relaying and is instead returning the forwarded e-mail to sender as Undelivered? My Exchange Relay Receive Connector is pretty simple. The Exchange server's FQDN is set as the HELO response, all available IP addresses can receive relayed e-mail, and the IP address of my sendmail server is specifically set as a remote server.

    Read the article

  • Issues with creating a snapshot

    - by Andy Welcomer
    Hello everyone, We have a strange issue when attempting to create a snapshot in one of our regional environments. We have 4 VMs, 2 of them have mulitple VMDKs spread onto different datastores. When a snapshot is created, all the VMDKs (except for the first), seem to vanish. If you look at the properties of the VM, the path to the VMDKS points to the datastore where the primary VMDK is, and the file name is some random garbage. If the snapshot is deleted everything returns to normal. Has anyone ever seen this? I'm using ESX3.5 Thank you in advance. Andy ==============UPDATE============== Here is some more information. I just created a test machine with 7 VMDKs. 1 for the OS. and 6 others for data. All of the VMDKs are in seperate datastores. I take a snapshot of the machine, all of the 6 VMDKs loose their reference to the actual VMDK files. The all point to 64KB VMDK files in the datastore where the OS VMDK is located. These 64KB vmdks didn't exist until the snapshot was taken. When the snapshot is deleted, everything goes back to normal.

    Read the article

  • Static Network configuration with bridge in CentOS 6.2

    - by Kyle
    I have a server with CentOS 6.2 installed, I want to use it as a VM host to run some windows installations for development purposes. I wanted to be able to directly RDP and serve websites from IIS on these windows server installations, so I figured I would set it up as bridged networking. I have been struggling with this all morning, usually the result being that when I brought up the bridge interface all network connectivity to the CentOS would go away, however, I think I finally have that all figured out. However, here's what happens. The eth0 and br0 interfaces are defined in /etc/sysconfig/network-scripts with ifcfg-eth0 and ifcfg-br0. I DO NOT have ifup or ifdown or any other files for these interfaces, I have not found if they are needed. I can login and use firefox to browse the web, however, running ifconfig reveals that my eth0 does not have an IPAddress, but the br0 does. I can actually RDP into the Windows installation, and browse the internet from there as well, but I cannot directly connect(via putty, vnc, nor viewing web pages) to the CentOS box. Any idea what's up? ifcfg-eth0 DEVICE=eth0 BOOTPROTO=none IPADDR=192.168.1.20 GATEWAY=192.168.1.1 NETMASK=255.255.255.0 NETWORK=192.168.1.0 ONBOOT=yes BRIDGE=br0 ifcfg-br0 DEVICE=br0 TYPE=Bridge BOOTPROTO=static DNS1=192.168.1.1 DNS2=8.8.8.8 GATEWAY=192.168.1.1 IPADDR=192.168.1.2 NETMAS=255.255.255.0 ONBOOT=yes I know some of the options are inconsistent (DNS and BOOTPROTO) because I tried changing those in the eth0 file to make it work, and the changes haven't adversly affected web browsing or the other functionality Thank you!

    Read the article

< Previous Page | 136 137 138 139 140 141 142 143 144 145 146 147  | Next Page >