Search Results

Search found 4224 results on 169 pages for 'dual gpu'.

Page 141/169 | < Previous Page | 137 138 139 140 141 142 143 144 145 146 147 148  | Next Page >

• make multiple, composite query in oracle

  - by Meloun

  How can i make multiple, composite query in oracle? for example this several queries in one step? 1 CREATE TABLE test (id NUMBER PRIMARY KEY, name VARCHAR2(30)); 2 CREATE SEQUENCE test_sequence START WITH 1 INCREMENT BY 1; 3 CREATE OR REPLACE TRIGGER test_trigger BEFORE INSERT ON test REFERENCING NEW AS NEW FOR EACH ROW BEGIN SELECT test_sequence.nextval INTO :NEW.ID FROM dual; END; 4 INSERT INTO test (name) VALUES ('Jon'); 5 INSERT INTO test (name) VALUES ('Meloun');

  Read the article

• New to building computers worried about temps

  - by dave

  I'm new to building my own computers and I was wondering about maximum temperatures. I understand that the room temp can affect the computers temp but how relevent is it? I understand that if my room temp is 20°C none of my computer parts could be lower than that. But if my room is 27°C instead of 20°C would this cause my computers parts to heat up more/faster? My new computer I built myself for gaming is i7 2600k 16gb ram ddr3 1600 hd6970 2 gb 240gb ssd ( bought a nas with 3 2tb drives in raid 5 for my home network ) 850w modular psu I also have my old hp computer i3 2120 8gb ram hd6770 1tb hdd I also have 3 laptops in my household, but I am not worried about their temps, they heat up my legs but they are never under stress. Due to size and money reasons I used an old case and it only has one of the sides left on it. Is this bad for the computer and will the extra dust cause problems? Or should I leave it this way or take the missus wrath and buy a case? If so is there any certain case I should get? I don't care about looks I just want card reader and usb slots and for it to run as cool or cooler than now, my case has 1 fan. Also what are the max temps for my new and old computer parts? Is 40°C under load ok for my CPU, what about 70°C for my GPU is that ok too, or should I worry? What are normal and safe temps for my components? I have looked around but there seem to be lots of different answers. I know that 100°C is bad but I want my parts to last as long as possible and this site always seems to give good replies without arguing or flaming.

  Read the article

• Sequence Generators in T-SQL

  - by PaoloFCantoni

  We have an Oracle application that uses a standard pattern to populate surrogate keys. We have a series of extrinsic rows (that have specific values for the surrogate keys) and other rows that have intrinsic values. We use the following Oracle trigger snippet to determine what to do with the Surrogate key on insert: 'IF :NEW.SurrogateKey IS NULL THEN SELECT SurrogateKey_SEQ.NEXTVAL INTO :NEW.SurrogateKey FROM DUAL; END IF;' If the supplied surrogate key is null then get a value from the nominated sequence, else pass the supplied surrogate key through to the row. I can't seem to find an easy way to do this is T-SQL. There are all sorts of approaches, but none of which use the notion of a sequence generator like Oracle and other SQL-92 compliant DBs do. Anybody know of a really efficient way to do this in SQL Server T-SQL? BTW we're using SQL Server 2008 if that's any help. TIA, Paolo

  Read the article

• how to compare between Doctrine & Propel in symfony

  - by Patrick

  I am in the early stages of rearchitecting my company's application. The app is currently running on symfony 1.2, and I used the default ORM at the time, Propel. Symfony has since updated to 1.4 and switched default ORM to Doctrine. From my understanding, each ORM excels at particular types of database structures. Is this true or is one far and away better than the other? Are there any good methods to test which ORM would be best in my situation in a test environment using my schema (i.e.- set up dual, identical sites and run tests)?

  Read the article

• How to play 24 fps video smoothly on a 60Hz display?

  - by netvope

  I use mpc-hc to play videos on Win7 x64. With the default settings (#1), video playback is great most of the time. But for panning shots, playback is not smooth. I stepped through the video frame by frame and found that the panning movement is smooth (e.g. each frame shifts horizontally by 10 pixels), so the problem is how the 23.976 fps video is interpolated to 60Hz. The judder looks like what would be caused by a "2:3 pulldown", where the frames are played unevenly like: frame 1, 1, 2, 2, 2, 3, 3, 4, 4, 4, etc (#2) Using "optimal renderer settings" (#3) instead of the default disables the Aero theme and causes tearing. Setting my LCD display to 50Hz may have improved the judder slightly (but I can't really tell). My display does not support 24Hz or 48Hz, and forcing them in the Nvidia control panel gives blurry screen. I've tried other video players (VLC and KMPlayer), the ReClock Directshow Filter, video files from different sources (#4), turning on/off DXVA, and a computer with a different GPU, but the judder in the playback is similar. None of them solved the problem. So, how can I play 23.976 or 24 fps video smoothly on a 60Hz display? I think a video player could make the video smoother by doing linear interpolation, such as: 1. 100% frame 1 2. 60% frame 1 + 40% frame 2 3. 20% frame 1 + 80% frame 2 4. 80% frame 2 + 20% frame 3 5. 40% frame 2 + 60% frame 3 6. 100% frame 3 7. 60% frame 3 + 40% frame 4 .. etc Can any existing video player do this? Footnotes: (#1) Video renderer: EVR Custom Pres. (#2) This example converts a 24 fps video into 30 fps (#3) View Renderer settings Reset Reset to optimal renderer settings (#4) The files I have are all H.264 mkv files, but I don't think the file format/encoding matters.

  Read the article

• Laptop Randomly Turning On and Off

  - by Ian Mallett

  So, I have a pretty new laptop, and one of its quirks is that, at random times (though typically in the middle of the night), it seems to wake up from sleep mode, churn a bit, and then go back into sleep mode. I write "seems" because its fans are very loud, so it's obvious when it's not asleep, but during the time it is "on", I can't see anything on the screen. I have researched the problem somewhat, and could only find similar issues; nothing identical. In those cases, it appeared that certain devices could be responsible. Nothing is plugged into my computer during this behavior, but I nonetheless disabled every device's permission to wake the computer through the device manager. This included disabling the magic packet wake for the network (despite its only having a wireless connection). Using "powercfg /lastwake" gives an empty wake history. But, I also went through all the tasks and checked if they would wake the computer. None appeared to. The problem persisted, so, after some more research, I found this, and executed it for all power schemes on the computer. The problem persists. System: OS: Windows 7 Professional CPU: Intel 990X GPU: NVIDIA GeForce 580M/12GB RAM Motherboard: Clevo X7200 Model: NP7282-S1 (Sager-built laptop)

  Read the article

• Ubuntu 12.10, Unity, AMD 12.11 beta drivers, AMD APP SDK 2.7 and OpenCL detection of multiple gpus

  - by junkie

  I'm using Ubuntu 12.10, AMD 12.11 beta drivers, AMD APP SDK 2.7 and OpenCL. I have three amd radeon 7990s plugged in each of which are a dual 7970 so I have six gpus altogether. I plan to go up to eight in a few days. Windows couldn't use even 4 but linux works fine with 6 so far. The strange thing is that the six gpus are only detected by OpenCL in unity (the ubuntu default window manager). If I switch to e17, blackbox or fluxbox or anything else for that matter OpenCL only detects one. I'm using a simple OpenCL program to list all devices to check. I've also checked the output of aticonfig --list-adapters, fglxinfo and clinfo. The first two always show six in all window managers wheras clinfo shows 6 in unity but 1 gpu in all other WMs. I'm also using an X config generated by aticonfig --initial -f --adapter=all. I'm also only using one monitor. I've also checked using lsmod that the fglrx module is loaded in all WMs. So I have two questions. Why does OpenCL see six gpus only in unity? How can I enable six gpus on other lightweight WMs? Basically I'm getting at what determines how many gpus the OpenCL runtime sees? Thanks.

  Read the article

• Looking for a "light" compositing manager for GNOME

  - by detly

  I have an HP Pavilion DM3 (graphics is nVidia GeForce G105M), running Debian Squeeze with GNOME 2.30. My preference for DE is Gnome + Metacity + Nautilus. I'd like to use Docky, but it requires compositing. So I'm looking for a relatively "light" compositing manager. I realise that "light" is ambiguous, but I basically want something that won't chew through my notebook's batteries because of CPU or GPU usage. I know that Metacity is capable of compositing, but as far as I'm aware it's still testing. Some people report that it's smooth and lightweight, others claim that it eats up processor time. I've also seen references to a problem with nVidia, but no actual details. I'm not averse to Compiz, but I haven't used it before and I don't know what to expect in terms of "weight." And maybe there's something else I haven't heard of. So can anyone recommend anything? Or dispel my idea that Metacity is not the right tool for the job? (Originally posted on GNOME forums.)

  Read the article

• Intel Ethernet Bottlenecking Internet?

  - by Donald Darma

  I'm having trouble with my internet speeds. So I just recent build a pc and everything is fine. I installed the Intel drivers and connected to the internet. It connects but I'm only half the speed I should be getting. My normal speed is 20mbps but speedtest.net is only showing 10. It can't be my ISP (which is TWC if anyone is asking) because my other devices like my laptop and my smartphone are showing 20 down. Heres my system: CPU: i5 4430 HSF: Stock cooler Mobo: Gigabyte Z87MX-D3H GPU: x2 MSI R7950-3GD5/OC BE RAM: Crucial Ballistix Tactical Tracer 8GB dual channel PSU: Silencer High Performance Power Supply 750 Watt 80+ (It's a subdivision of OCZ) HDD: Seagate Barracuda 7200RPM 3TB SSD: Samsung 840 Evo 120 GB Case: Corsair Obsidian 350D Edit: I am using the stock adapter that is on the motherboard. I know for a fact that the cable is good because I used it on my laptop and it ran fine. Its a CAT5E cable. I also ran IPERF and its giving me the same results, 10 mbps.

  Read the article

• How to test my application on older version of IE?

  - by Rakesh Juyal

  I have installed IE8 on my system. I usually test my application on this browser, but the problem arises when i got to know that the client is using IE7. Now how can i test my application on IE7? One possible solution is to have dual booting on my system. So on version of Windows i can have IE7 and on another i can have IE8. But i really don't want to use this solution. Another possible solution is to use PC Emulator [ Don't know what is this, just heard about these ]. Using which i can have multiple IE version simultaneously. Have you ever tried this solution? Please name any good FREE emulator. Please let me know if there is any other better solution.

  Read the article

• Flash CS5 projects panel totally gone?

  - by Jesse

  So, I popped open up Flash CS5 just now, and I couldn't find my projects panel. I was working on a dual screen set up previously, so my windows were everywhere anyways (sans external). I switched over to a smaller screen workspace, and popped opened the projects panel. Oddly enough, the code snippets panel came up instead. So, I switched off the code snippets, and tried again. I've been trying different ways of opening this panel for about 15 minutes, and I'm totally stumped. Some thorough googling didn't present any relevant results, so, StackOverflow, I turn to you. Is this a known issue? is there a secret backdoor way to open this panel? Am I totally missing something?

  Read the article

• How to play 24 fps video smoothly on a 60Hz display? (or which player supports frame interpolation?)

  - by netvope

  I use mpc-hc to play videos on Win7 x64. With the default settings (#1), video playback is great most of the time. But for panning shots, playback is not smooth. I stepped through the video frame by frame and found that the panning movement is smooth (e.g. each frame shifts horizontally by 10 pixels), so the problem is how the 23.976 fps video is interpolated to 60Hz. The judder looks like what would be caused by a "2:3 pulldown", where the frames are played unevenly like: frame 1, 1, 2, 2, 2, 3, 3, 4, 4, 4, etc (#2) Using "optimal renderer settings" (#3) instead of the default disables the Aero theme and causes tearing. Setting my LCD display to 50Hz may have improved the judder slightly (but I can't really tell). My display does not support 24Hz or 48Hz, and forcing them in the Nvidia control panel gives blurry screen. I've tried other video players (VLC and KMPlayer), the ReClock Directshow Filter, video files from different sources (#4), turning on/off DXVA, and a computer with a different GPU, but the judder in the playback is similar. None of them solved the problem. So, how can I play 23.976 or 24 fps video smoothly on a 60Hz display? I think a video player could make the video smoother by doing linear interpolation, such as: 1. 100% frame 1 2. 60% frame 1 + 40% frame 2 3. 20% frame 1 + 80% frame 2 4. 80% frame 2 + 20% frame 3 5. 40% frame 2 + 60% frame 3 6. 100% frame 3 7. 60% frame 3 + 40% frame 4 .. etc Can any existing video player do this? Footnotes: (#1) Video renderer: EVR Custom Pres. (#2) This example converts a 24 fps video into 30 fps (#3) View Renderer settings Reset Reset to optimal renderer settings (#4) The files I have are all H.264 mkv files, but I don't think the file format/encoding matters.

  Read the article

• I can't get my PC to start up by a normal way.

  - by ssice

  I couldn't write a more accurate title. I am just unable to start the computer by pressing the Power On button. I checked the Power Supply and it seems to give good voltage values in every pin. And this is not a BIOS malfunction because of bad overclocking or anything that may come to your mind. And I will tell you why. It happens that EPS (or any ATX-based) power supply has the ability to be powered-on by the Motherboard by jumping the 13th pin of the 24-pin-ATX-connector to COM/GND. I did it, after pushing the power on button (without any visual response) and, pwhaa! The machine turned on. I was able to read (and even write, if I wanted) BIOS values and then start any OS installed. Machine starts, so it's not any kind of misconfiguration. It seems some hardware related. I am able to power the machine on only if I already pushed the power on button. Though pushing it without jumping the 13th pin to ground for a second does not power the machine. Of course, jumping the pin without pushing the power on button does not tell the motherboard anything, so the computer would not start up either. It's as if the logic that connects the power button with the 13th pin derivation to GND was unable to be activated. What can be the issue? How can I solve it? My configuration is as follows: CPU: AMD Phenom 9850 X4 Black Edition MB: ASUS Formula II AM2 RAM: 2x2GB Corsair Dominator 5-5-5-15 2T @ 1066MHz DDR2 Tested also with only 1 module GPU: 2x XFX nVIDIA GeForce 9600 GT XxX Alpha Dog Edition @ Core: 540Mhz [SLi] Power Supply: Xilence 700W (ATX 12V 2.3 / EPS 12V 2.92 compatible) PS: I know the machine is like 2 years old. I hardly use it now, but my parents do.

  Read the article

• WindowStartupLocation.CenterScreen is opening my window on the wrong display

  - by chaiguy

  According to the documentation, CenterScreen should open the window in the center of the screen that contains the mouse cursor, however this is not happening. I have a dual monitor setup, with my secondary monitor appearing to the left of my primary monitor (the one with the task bar). When the user clicks a link in my interface on the primary (right-most) monitor, and I open a new window with WindowStartupLocation set to CenterScreen, the window appears in the center of the screen of the left monitor. This is not where the mouse is and I am lost as to why it is picking that display. Has anyone experienced this before or have any ideas for a workaround? If I can't get the proper behavior using WindowStartupLocation, I will just manually move the window to the proper display (I still have to figure that out though).

  Read the article

• CPU temperatures high on new build after gaming

  - by Reznor

  My friend had a problem with his computer a while back. His games were crashing, even within the menus. He was stumped as to what the problem was, so I posted on here requesting help. He found out the day later, when his computer would start up but wouldn't display anything on the screen. His video card must have came screwed up. So, he got a replacement. Now, there's a new problem. His temperatures, which were acceptable before, are now insanely high. His GPU temperature runs 70-80c, which is understandable considering he's running his games maxed out, but the real problem here is his processor and motherboard temperatures. All four of his cores are running at 88-90c after coming out of a game. His motherboard temperature was also 70c at one point. In terms of cooling, his case should definitely be adequate. He has an Antec Twelve Hundred. He's using stock fans. The cable management in his case is very good; better than average. He's using the stock heatsink with the processor too, but note, it was fine before the replacement, so it isn't like there's some inherent problem. He has checked the case too. Everything's fine! No cables in the way. The heatsink is seated properly. He turned his case fans up to high, as well, but the temperatures are persisting. Could the processor be overheating due to running games maxed out? Any ideas?

  Read the article

• rails error on create action

  - by ash34

  SQL (2.0ms) SELECT task_report_requests_seq.NEXTVAL id FROM dual TaskReportRequest Create (2.2ms) INSERT INTO task_report_requests (location, created_at, updated_at, id, freq, login, task_dt) VALUES('020', TO_DATE('2010-05-25 05:02:38','YYYY-MM-DD HH24:MI:SS'), TO_DATE('2010-05-25 05:02:38','YYYY-MM-DD HH24:MI:SS'), 10023, 'M', NULL, TO_DATE('2010-05-30 00:00:00','YYYY-MM-DD HH24:MI:SS')) NoMethodError (You have a nil object when you didn't expect it! The error occurred while evaluating nil.call): app/controllers/task_report_requests_controller.rb:45:in `create' It says error evaluating nil.call . Can someone tell me when I would get such an error. I am not able to figure out with this information. thanks, ash

  Read the article

• Maximizing Adobe Air windows on multiple monitors

  - by Andrew

  In an Adobe Air AJAX application with multiple windows running on a system with multiple (three or more) monitors, can you maximize the windows in each monitor? I've seen posts by others trying to do this, but I've not seen anyone saying how it worked out. I basically need to build a 'status monitor' system (similar to, say, an airport departures monitor) in which there are public-facing displays that need to look and feel like single-purpose, embedded applications -- no window chrome and no visible desktop. I don't think this should be any different from any other windows application, but I don't know about Air. I have a dual-monitor Mac setup right now, but I can't easily test Windows and I likely will never be able to test three monitors at once. This application will be run as an AJAX Air application written in Aptana (or DW if it makes a difference).

  Read the article

• mysql - filtering a list against keywords, both list and keywords > 20 million records

  - by threecheeseopera

  I have two tables, both having more than 20 million records; table1 is a list of terms, and table2 is a list of keywords that may or may not appear in those terms. I need to identify the terms that contain a keyword. My current strategy is: SELECT table1.term, table2.keyword FROM table1 INNER JOIN table2 ON table1.term LIKE CONCAT('%', table2.keyword, '%'); This is not working, it takes f o r e v e r. It's not the server (see notes). How might I rewrite this so that it runs in under a day? Notes: As for server optimization: both tables are myisam and have unique indexes on the matching fields; the myisam key buffer is greater than the sum of both index file sizes, and it is not even being fully taxed (key_blocks_unused is ... large); the server is a dual-xeon 2U beast with fast sas drives and 8G of ram, fine-tuned for the mysql workload.

  Read the article

• Gaming blew fuse: how to overcome?

  - by George Tomlinson

  I've been gaming for a while now. When playing certain games this PC goes into overdrive. The fan/fans start/s to sound like a jet engine it/they get/s so busy. Also I have smelt burning when this has happened. The fuse blew on the 4 socket adapter I was using recently. On the following thread someone said this could be due to the PSU not being strong enough to handle the load, in what it seems could be a related issue someone had, although the person who posted this question did say that blowing a fan on their PC stopped it crashing in that case: http://www.tomshardware.co.uk/answers/id-2047543/gtx-650-overheating-issue.html. This is exactly what they said: Your GPU isn't overheating. 70+ before it would shutdown and cause a restart. Make sure your PSU is strong enough to handle your new system at load and possibly run Memtest to check your RAM (although not BSOD'ing and just shutting down points to the PSU). This (the PSU part) makes more sense to me than it being to do with dust etc, since it seems a more plausible explanation of why the fuse blew. The PC has no problems except when playing certain games: i.e. TERA Rising and WoW with add-ons (I think WoW is ok as long as I don't have more than 1 add-on (Healers Have To Die)). I'm just wondering if anyone knows or can suggest what I might be able to do to be able to play these games without this problem occurring. The PC's spec is this: Display: NVIDIA GeForce GTX 650 8GB RAM (6 available) Processor: AMD FX (tm) - 8120 Eight-Core Processor - 3.1 GHz, 4 Cores, 8 Logical Processors I have read on another post that forcing vsync in the Nvidia Control Panel helped with what seems could be a similar problem, so I plan to see if that solves it, God permitting.

  Read the article

• Computer won't start after installing new video card

  - by Vercas

  So, 1 year and 340 days ago I bought a desktop computer. Since then, it has served me well. But lately, I wanted an upgrade, so I bought a new video card. I documented myself about the compatibility, and it is okay. So I opened the case, cleaned up that... dust elemental living inside of it. Unscrewed the plastic thingie on the outside to unscrew the old video card. Because of the stupid arrangement of the ports, I had to unscrew the motherboard to unplug it. So I unscrewed it, removed the old card, put in the new one, moved the motherboard back, screwed it back in, screwed the video card on the holder... thingie, and screwed the plastic thingie back in. Everything went smoothly, nothing had to be forced in/out. I connected the external power supply, closed the computer case, put the tower back in it's place and all the cables back in. When I pressed the power button, the LED turned... some color I can't distinguish. It stayed that way for a second, and then it went off. I tried a bunch of things, including permuting the external power supply arrangement (1 connection, 2 connections and no connections), with no success. And here are some of the specifications: Motherboard manufacturer: Asrock Processor: AMD Athlon II X2 3.0 GHz RAM: 2 x 2GB (had only 1 initially, bought the second plate a bit later) OLD video card: AMD Radeon HD 5450 NEW video card: Gigabyte nVidia GeForce GTX 650 GPU, 1GB GDDR5 128bit PCI-E, Dual-link DVI-Dx2 / HDMI / D-Sub Power supply: 450W + all the requirements I managed to find on the internet are met (+12V 18A or something) More specific information is stored... On that computer. If required, I may open the case again and read the stickers to find more specific information. I can also provide photos if necessary. Any ideas? Suggestions? Something? :|

  Read the article

• Using Visual Studio 2005 (32bit) on a Windows 7 64bit machine.

  - by Krakkos

  I need to use Visual Studio 2005 (C++) on my new laptop - a Sony Vaio with Windows 7 64bit.. I don't need to develop for a 64bit environment, my work is all 32bit, so how can I be sure that I can still develop/debug/test for a 32bit target environment using VS2005 on a 64bit machine....? What's the best option: 1) Just install VS2005 on Windows 7 64bit and carry on.. (suspect problems with 64bit runtime libs..?) 2) Dual boot the laptop with Windows XP 32bit. 3) Run some kind of Virtual Machine with Windows XP in it... (I don't have a VM yet, but would look into it) Thanks

  Read the article

• Is there an application to log component temperatures to file?

  - by MrVimes

  I purchased a computer a month or two ago (core i7, 24gb ram, geforce gtx 590, windows 7 ultimate). Within the last week it began to bluescreen regularly. I tried lots of things (check hds, check memory, reinstall windows etc..) but it still bluescreened. At the time my temps were as follows... CPU - aprox 40/50c. GPU - arpox 60 idle, aprox 90 during heavy use. HDDs - aprox 55c after the PC had been on a while. I thought the 55c was ok, but I have since realized it was probably too high and may have been the direct cause of the bluescreening. I've installed a spare fan I had in the front of the PC blowing air in, (so there's airflow from front to back) Since then, obviously, all my temps are down. Especially the HDDs - three of them reach 30c and one has been up to 47c (it is some distance away from the airflow, in one of the 5.25inch drive bays) I haven't had the PC on for as long as it would normally take to bluescreen yet, but If it does I want to know what all the temps were right before the bluescreen. I have tried Everest but it only shows me realtime temps or gives me the ability to create one-off reports. I want something that can record all the temps to a file at 30 seconds intervals. If the computer bluescreens I can load it up again and check the last entry in the file. Side question: Am I right in thinking 55c was far too hot for a HDD? (It might have got higher than that before the bluescreens.. I don't know) Another side question: Is 47c too high? This is actually why I am asking the main question - I am concerned that this one drive that isn't getting the benefit of the extra fan may still cause the computer to bluescreen.

  Read the article

• Parallel Haskell in order to find the divisors of a huge number

  - by Dragno

  I have written the following program using Parallel Haskell to find the divisors of 1 billion. import Control.Parallel parfindDivisors :: Integer->[Integer] parfindDivisors n = f1 `par` (f2 `par` (f1 ++ f2)) where f1=filter g [1..(quot n 4)] f2=filter g [(quot n 4)+1..(quot n 2)] g z = n `rem` z == 0 main = print (parfindDivisors 1000000000) I've compiled the program with ghc -rtsopts -threaded findDivisors.hs and I run it with: findDivisors.exe +RTS -s -N2 -RTS I have found a 50% speedup compared to the simple version which is this: findDivisors :: Integer->[Integer] findDivisors n = filter g [1..(quot n 2)] where g z = n `rem` z == 0 My processor is a dual core 2 duo from Intel. I was wondering if there can be any improvement in above code. Because in the statistics that program prints says: Parallel GC work balance: 1.01 (16940708 / 16772868, ideal 2) and SPARKS: 2 (1 converted, 0 overflowed, 0 dud, 0 GC'd, 1 fizzled) What are these converted , overflowed , dud, GC'd, fizzled and how can help to improve the time.

  Read the article

• php is not recognized as an intern command (using windows)

  - by Tristan

  Hello, I want to develop using a framework called symfony BUT, i do not have a MAC and i don't want to dual boot with Debian. I tryed virtual hosts via Virtual Box but it's too crappy. So i decided to stay on windows So when the tutorial tells me to do php lib/vendor/symfony/data/bin/check_configuration.php i do in the windows cmd : php lib\vendor\symfony\data\bin\check_configuration.php and it tells me : 'php' is not recognized as an internal or external command I use UwAmp (php 5.2.12 + mysql + apache) which is stored in E:\logiciels\UwAmp\ inside i have buch of file, but i guess that is important : E:\logiciels\UwAmp\apache\php_5.2.11 How to make the cmd PHP in the windows cmd work propely please?

  Read the article

• Change Gmail message routing on individual mailboxes

  - by citadelgrad

  We are using dual delivery for one of our Google Apps doamins and need to be able to disable mail delivery to the Gmail account. You can manually update the settings on a per user basis through the Admin interface by unchecking the box next to "Google Apps Email" in the Email routing section. From the Google Apps API documentation for the python library it does not appear that I programmatically disable the email routing for "Google Apps Email" on a per user basis. Does anyone know if it's possible? The only routing related method I can find is at the Domain level and not the user level. gdata.apps.adminsettings.service Thank you!

  Read the article

< Previous Page | 137 138 139 140 141 142 143 144 145 146 147 148  | Next Page >