mark stephens - Page 141

Suspected Router problems, [closed]

- by jordon_user

I am new to this forum. I appreciate any help you can offer. I have been troubleshooting an error with both my WIRED Internet Connection I have 3 desktops running through this working connection (Router) with no problems. Two computers, one laptop and desktop experience the issue. If I connect directly to the Modem, on either, no problem on the internet. Through the Router, my computer connects for a period of time but if ever awaking my comp, or restarting, the yellow explanation mark returns. The only way I can get the connection up = cmd. ipconfig /release, ipconfig /renew. This constant command is annoying and was hoping for a permanent fix. Audio is also not working. I know its likely a driver error, but its an old comp we put together and if there's an easy fix itd be great to hear from you! If you need any more info just let me know. Thanks! THanks guys!

Read the article

"Windows cannot find" file when opening Excel spreadsheet

- by DanH

For all of my Excel spreadsheets when I attempt to open them (by double-clicking in explorer) I get the message "Windows cannot find C:...". The files are there, and are valid zip files as seen by 7-Zip. There are no apparent lock files in the directories. I did just install Norton-360 over the weekend (replacing Kasperski), but the Norton log shows no events related to Excel. However, while installing Norton I did reboot with some Excel files open. Presumably something is hosed in my Excel configuration but I don't know what. Update (Before actually posting) -- I found an article that suggested turning off Advanced Option "Ignore other applications that use DDE", then doing excel.exe /unregister followed by excel.exe /register. I tried this but I suspect that the two Excel calls were ignored (Excel opened, but no obvious change). With that option off the spreadsheets load OK, but not with it on. And, curiously, spreadsheets load OK with the option on or off if I open Excel first and then open the spreadsheet in it. Does anyone have any idea what effect leaving that option off will have? Update 2 -- I tried running the "repair" option. It said it corrected a couple of config things (without saying what they were), but I still get a failure if I double-click an Excel file with the "Ignore other applications..." option checked. Update 3 -- I managed to fix this problem, but failed at the time to come back and say what I did, and now I can't remember for sure. But I think it had something to do with "Options"/"Save" and some of the values there. Something to do with AutoRecover, perhaps. (Possibly there was a file in recovery and I had to specify "Disable AutoRecover for this workbook" to let bring-up get past it. Or perhaps the AutoRecover file location was hosed.) Anyway, if it happens to someone else, and you find the fix, post it below and I'll mark it answered.

Read the article

firefox addon f@stestfox API sending/collecting data?

- by Richard

System: ubuntu64/firefox24.0 object: addon "f@stestfox". Its a nice in-browser search tool and more. Problematic: is the way the program handles the search queries. when I use a search shortcut, burpsuite says: request to msgs.smarterfox.com: 80 GET /log_msg?name=popup_bubble_searched&search_engine_title=Search%20Startpage&source=FastestFox&redirect_to=https%3A%2F%2Fstartpage.com%2Fdo%2Fsearch%3Fcmd%3Dprocess_search%26cat%3Dweb%26query%3Dnginx%26language%3Denglish%26no_sugg%3D1%26ff%3D%26abp%3D-1&rand=856827465 HTTP/1.1 Host: msgs.smarterfox.com User-Agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0) Accept: text/html,application/xhtml+xml,application/xml;q=0.9,/;q=0.8 Accept-Language: en-US,en;q=0.5 Accept-Encoding: gzip, deflate DNT: 1 Connection: keep-alive once I saw a unique identifier (installation time?) was send with the request to the server. Am I right, that the addon sends the website I am looking at to the server? Sometimes I only mark text(ip adress or link) and the addon send this data? seriosly? I did: search for the url in the code, but I dont speak java. And I am not sure, if the data from the request can actually be used for tracking :) question: I want the awesome features of the addon, without connecting to their server: marked text should be send only to the searchmachines. what should I do next? thank you.

Read the article

What could cause a WMV to not play to completion in a browser?

- by Ty W

A realtor has had videos created for a community she is selling homes for, the people who made the videos gave them to us in WMV format. I can play these videos without any problem in Windows Media Player, VLC, and Quicktime (via Flip4Mac). I can play the videos from their location at videohomeguide.com in my browser without any trouble. However when I upload the files to our server the video stops at about the 1 minute mark in Safari and FireFox on Mac OS X Snow Leopard. I'm not sure if Windows browsers have the same issue because they are loaded using Windows Media Player. http://carolepaul.com/images/uploads/cottageslsjamestown.wmv <- our server, will fail at 1:09ish. http://www.videohomeguide.com/media/cottageslsjamestown.wmv <- should play to completion (3:27ish) The files generate the same MD5 hash on my desktop and on our server. I used WGET to transfer the files, always downloading from videohomeguide.com. Since the files are identical and are playable using VLC/WMP/Quicktime, and playable in the browsers from videohomeguide.com it seems to me that it is some sort of server config... maybe incorrect headers sent to the browsers? Here are the headers sent and received by FireFox on OS X: http://carolepaul.com/images/uploads/cottageslsjamestown.wmv GET /images/uploads/cottageslsjamestown.wmv HTTP/1.1 Host: carolepaul.com User-Agent: Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.6; en-US; rv:1.9.2.2) Gecko/20100316 Firefox/3.6.2 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-us,en;q=0.5 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 115 Connection: keep-alive HTTP/1.1 200 OK Date: Mon, 29 Mar 2010 20:43:20 GMT Server: Apache/1.3.41 (Unix) PHP/5.2.6 FrontPage/5.0.2.2635 mod_psoft_traffic/0.2 mod_ssl/2.8.31 OpenSSL/0.9.8b Last-Modified: Wed, 02 Dec 2009 18:08:46 GMT Etag: "1e7919c-198eadc-4b16ad2e" Accept-Ranges: bytes Content-Length: 26798812 Keep-Alive: timeout=10, max=200 Connection: Keep-Alive Content-Type: video/x-ms-wmv

Read the article

Handle Sysinternals software does not accept -c parameter

- by Alex

I am trying to close a handle to a locked file in Windows, using Sysinternals Handle software (http://technet.microsoft.com/en-us/sysinternals/bb896655). First I search for opened handle: handle.exe "C:\Temp" It issues me the following: Far.exe pid: 1144 type: File 2E8: C:\Temp Far.exe pid: 1144 type: File 3A8: C:\Temp Next I run handle.exe with -c parameter. However, whichever number I enter, it does not do anything. I have tried both: 1144, 2E8, 3A8 and 1144 in hex (478) as the software help says it accepts PID in hexademic. Whatever I enter, it just issues the following: Handle v3.46 Copyright (C) 1997-2011 Mark Russinovich Sysinternals - www.sysinternals.com usage: handle [[-a [-l]] [-u] | [-c <handle> [-y]] | [-s]] [-p <process>|<pid>] [name] -a Dump all handle information. -l Just show pagefile-backed section handles. -c Closes the specified handle (interpreted as a hexadecimal number). You must specify the process by its PID. WARNING: Closing handles can cause application or system instability. -y Don't prompt for close handle confirmation. -s Print count of each type of handle open. -u Show the owning user name when searching for handles. -p Dump handles belonging to process (partial name accepted). name Search for handles to objects with <name> (fragment accepted). No arguments will dump all file references. What am I doing wrong?

Read the article

openvpn& iptables -- portforwarding and gateway

- by Smith.Lai

The problem is similar to this scenario: iptables rule still take effect after deleted Scenario: There are several clients(C1~C10) providing some services, such as SSH,HTTP..... The clients are actually a personal computer behind NAT. Their IP might be 192.168.0.x For easily access these machines through internet, I built a OpenVPN server(S1). All the C1~C10 connect to S1 with VPN address 10.8.0.x If A user(U1) wanna access C1 SSH through internet, he can connect to S1 with port "55555", and S1 port forward 55555 to 10.8.0.6:22 echo 1 /proc/sys/net/ipv4/ip_forward iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 55555 -j DNAT --to-destination 10.8.0.6:22 It works well until I mark the following in the openvpn server.conf: I marked this because I think this will make all connection go through S1 ;push "redirect-gateway" |-------(NAT)--------| (C1)--| (INTERNET)----(U1) |-----(VPN)----(S1)--| The C1~C10 have their own path to access internet resource through NAT . The server loading would be heavy if all C1~C10 connection go through S1 (for example, C1 is sending data to C2, or C1 is downloading data from a FTP site). Is there a way to solve this quandary?

Read the article

Git push over http (using git-http-backend) and Apache is not working

- by Ole_Brun

I have desperately been trying to get push for git working through the "smart-http" mode using git-http-backend. However after many hours of testing and troubleshooting, I am still left with error: Cannot access URL http://localhost/git/hello.git/, return code 22 fatal: git-http-push failed` I am using latest versions of Ubuntu (12.04), Apache2 (2.2.22) and Git (1.7.9.5) and have followed different tutorials found on the Internet, like this one http://www.parallelsymmetry.com/howto/git.jsp. My VHost file currently looks like this: <VirtualHost *:80> SetEnv GIT_PROJECT_ROOT /var/www/git SetEnv GIT_HTTP_EXPORT_ALL SetEnv REMOTE_USER=$REDIRECT_REMOTE_USER DocumentRoot /var/www/git ScriptAliasMatch \ "(?x)^/(.*?)\.git/(HEAD | \ info/refs | \ objects/info/[^/]+ | \ git-(upload|receive)-pack)$" \ /usr/lib/git-core/git-http-backend/$1/$2 <Directory /var/www/git> Options +ExecCGI +SymLinksIfOwnerMatch -MultiViews AllowOverride None Order allow,deny allow from all </Directory> </VirtualHost> I have changed the ownership of the /var/www/git folder to root.www-data and for my test repositories I have enabled anonymous push by doing git config http.receivepack true. I have also tried with authenticated users but with the same outcome. The repositories were created using: sudo git init --bare --shared [repo-name] While looking at the apache2 access.log, it appears to me that WebDAV is trying to be used, and that git-http-backend is never fired: 127.0.0.1 - - [20/May/2012:23:04:53 +0200] "GET /git/hello.git/info/refs?service=git-receive-pack HTTP/1.1" 200 207 "-" "git/1.7.9.5" 127.0.0.1 - - [20/May/2012:23:04:53 +0200] "GET /git/hello.git/HEAD HTTP/1.1" 200 232 "-" "git/1.7.9.5" 127.0.0.1 - - [20/May/2012:23:04:53 +0200] "PROPFIND /git/hello.git/ HTTP/1.1" 405 563 "-" "git/1.7.9.5" What am I doing wrong? Is it an issue with the version of git and/or apache that I am using perhaps? BTW: I have read all the git http related questions on ServerFault and StackOverflow, and none of them provided me with a solution, so please don't mark this as duplicate.

Read the article

Where in the stack is Software Restriction Policies implemented?

- by Knox

I am a big fan of Software Restriction Policies for Microsoft Windows and was recently updating our settings for this. I became curious as to where Microsoft implemented this technology in the stack. I can imagine a very naive implementation being in Windows Explorer where when you double click on an exe or other blocked file type, that Explorer would check against the policy. I call this naive because obviously this wouldn't protect against someone typing something in a CMD window. Or worse, Adobe Reader running an external application. On the other hand, I can imagine that software restriction policies could be implemented deep in the stack almost at the metal. In this case, the low level loader would load into memory the questionable file, but mark the memory in the memory manager as non-executable data. I'm pretty sure that Microsoft did not do the most naive implementation, because if I block Java using a path block, Internet Explorer will crash if it attempts to load Java. Which is what I want. But I'm not sure how deep in the stack it's implemented and any insight would be appreciated.

Read the article

Multiple Internet connections, multiple networks and split access in Linux

- by Swapneel Patnekar

I am having trouble setting up multiple internet connections for split access in Linux. We have 3 internet connections from 3 different ISP's. We want to configure our Linux gateway machine such that our three internal networks 10.2.1.0/24, 192.168.20.0/24 & 192.168.2.0/24 use ISP1, ISP2 and ISP3 respectively in a split access manner. Outlined below is the layout/settings, Interfaces of the Linux Gateway connected to Routers: eth0: 10.1.1.2<---------->10.1.1.1(Internal Interface of ADSL Router)[ISP1] eth1: 192.168.15.2<------>192.168.15.1(Internal Interface of 3G Router)[ISP2] eth3: 192.168.1.2<------->192.168.1.1(Internal Interface of ADSL Router)[ISP3] Kindly note that none of the interfaces in the Linux gateway has a public static IP address. Routers of ISP1 and ISP2 get assigned a dynamic public IP address when connected to the Internet, router of ISP3 has been assigned a public static IP address. Interface of Linux gateway connected to a switch, eth4: 10.2.1.1(LAN Interface for ISP1) eth4:0 192.168.20.1(LAN interface for ISP2) eth4:1 192.168.2.1(LAN Interface for ISP3) eth4:0 & eth4:1 are virtual interfaces with eth4 being the interface connected physically. Based on http://linux-ip.net/html/adv-multi-internet.html I've set the following routes, ip route flush table 4 ip route show table main | grep -Ev ^default | while read ROUTE ; do ip route add table 4 $ROUTE done ip route add table 4 default via 192.168.15.1 ip rule add fwmark 4 table 4 ip route flush cache Additionally, using the following iptables rules to mark & route packets as per the guide mentioned above : http://pastebin.com/KzWHFGJA At this point, computers from 192.168.2.0/24 network are successfully able to reach the Internet through ISP3. 192.168.20.0/24 and 10.2.1.0/24 are unable to access the Internet through ISP1 and ISP2 respectively. Any inputs will be much appreciated !

Read the article

foswiki: hide some topic info when editing in WYSWYG mode.

- by Mica

I have a FOSWiki installation with a bunch of Topic templates already defined. the problem is, when a user selects the topic, they are presented with a bunch of extra information that they should not edit, and should not even see really. Is there a way to hide this content in the WYSWYG editor? Example: The topic template looks like this:         Header 1 foo etc. etc. etc  And when the user selects the topic template, they get all that in the WYSWYG editor. I would like to hide all that so when the user selects the topic template, they get Header 1 foo etc etc etc Without any of the other mark-up.

Read the article

Kindle (client) for Mac

- by doug

So we're clear, i'm talking bout the client/software version here--ie, that you install on your Mac or PC--not the device. The Kindle client was recently released for the Mac. I bought a couple of Kindle-edition books and i'm reading them using this client. Astonishingly, two features i consider to be more or less essential to any ebook reader are missing in the Kindle client, either that, or i can't find them: (i) text searching; and (ii) highlighting text. First, does anyone know how to access the search feature? I'm aware of the "Go To" button at the top middle of the reader window--the options in that menu when you click the button are: "Cover", "Table of Contents", "Beginning" and "Location." "Location" requires that you type in an integer (but it doesn't correspond to page number--e.g., typing "167" brought me to the table of contents), not a search term. Second, there's a button on the upper right-hand corner of the window "Show Notes and Marks" yet i can't find any way to highlight text. The only kind of "note" or "mark" i have been able to record is to "bookmark" a page by clicking the "bookmark" button also at the top of the window.

Read the article

How does the "Steam" platform work? Is it DRM? Can I trust "Steam"-powered software? [closed]

- by Chris W. Rea

So – I just bought the new game Supreme Commander 2. This question is not about the game, but about the online software installation platform that it seems to require. I haven't bought a game in a long time, and I'm puzzled: Apparently, SC2 is a "Steam"-powered game. When I went to install the game, it asked me to either create a new Steam account, or log in with an existing account. I clicked "Cancel" because I don't plan to play online and I don't want anything unnecessary installed on my computer, since I only plan to play single player! However, after clicking "Cancel", the installer asked for my confirmation that I indeed wanted to cancel installation of the game! I thought I was just canceling the "online" portions! So I really want to know: How do "Steam" powered games work? Is this essentially a form of DRM (Digital Rights Management)? Can I trust this software platform? Has anybody done any independent verification on how this platform works? (I'm very leery of any DRM after the Sony BMG CD copy protection scandal. Thank goodness for Mark Russinovich.) Does the "Steam" platform install anything particularly nasty or unwanted on my computer? High-rep users: Please vote to reopen this question. It is not about the game, but about the software update platform / updater / DRM. Imagine if the software in question were a productivity application. The issues remain the same.

Read the article

Need to boot into chkdsk from USB on Windows netbook

- by Gaz Davidson

While attempting to install Ubuntu on a 32-bit Windows XP netbook, the partition resize operation failed due to inconsistencies in the NTFS filesystem (lesson learned: run chkdsk /f in Windows before trying to resize a partition in Linux). Now the installer only gives the option to replace Windows with Ubuntu, the partition can't be resized in gparted, which displays a red exclamation mark and an error log when you click it. To make matters worse, we're also unable to reboot into Windows to get at chkdsk. We get a BSoD when choosing any of the options (including the DOS recovery console thing). The netbook has no CD-ROM drive, contains no recovery image and our only connection to the Internet is via the hotspot on my mobile device. We don't have Windows recovery CDs, but we do have a USB flash drive. We have a 64-bit laptop running Ubuntu 12.04 and Windows 7 (both 64-bit). So, on to the question: Is anyone aware of a way to get into a DOS recovery console and run chkdsk from a USB disk drive, without having to pirate Windows XP or download hundreds and hundreds of megabytes of crap? If it was my device I'd just flatten it, but it isn't. Please help!

Read the article

OpenVPN, install a TAP adapter

- by GolezTrol

When I try to connect to my work VPN using OpenVPN, the connection fails with the message: All TAP-Win32 adapters on this system are currently in use. Many sources suggest to look in Control Panel\Network and Internet\Network Connections an enable the TAP adapter, but when I look there, there is none. Now I've run addtap.bat which is provided with OpenVPN, but I still don't get to see any TAP adapter, and logging in in VPN still fails. The output of addtap.bat is C:\Windows\system32>"C:\Program Files (x86)\OpenVPN\bin\tapinstall.exe" install "C:\Program Files (x86)\OpenVPN\driver\OemWin2k.inf" tap0801 Device node created. Install is complete when drivers are updated... Updating drivers for tap0801 from C:\Program Files (x86)\OpenVPN\driver\OemWin2k .inf. Drivers updated successfully. I've Run As Administrator both the setup of OpenVPN and addtap.bat. I've run deltapall.bat to remove any (maybe hidden) adapters. It said it removed three of them, after which I ran addtap.bat again to try to create another one. I also run OpenVPN itself as administrator. What's wrong? Running Windows 7 Home Premium on a HP Pavilion dv7 4050ed. It has worked before, but I recently had to reinstall my laptop, for which I used the restore disks I created when I just got it. Everything else seems to work fine. == UPDATE == The TAP adapter is found in Device Manager, but apparently it is disabled because it is incompatible with Windows 7 64bit. I've deïnstalled OpenVPNGui, downloaded a version that should be 64bit compatible, and installed that. Still no cigar. Then I found a tip to install OpenVPN (version 9) after installing OpenVPNGui, because that installs OpenVPN version 8. Now I got a v9 TAP driver in Device Manager, but it still doesn't work and shows up in device manager with an exclamation mark, and not at all in my network devices.

Read the article

Formatting an external HDD stuck at 70%

- by mahmood

My external HDD which is a 250GB WD (powered by USB) seems to have problem! Whenever i try to copy some files, it stuck while copying. I decided to format it. So I used windows tool and performed the format (not quickly) however at nearly 70% it stuck. Then I decided to perform a low level format with lowlevel. Again it stuck at 70%. I endup that the HDD has bad sector. So is there any tool that mark the bad sectors and bypass them? It is not very reasonable to through 250GB because of some bad sectors! P.S: I saw a similar topic but there were no conclusion there either. The smart data is Attribute, raw value, value, threshold, status Read Error Rate, 50, 200, 51, OK Spin-Up Time, 3275, 154, 21, OK Start/Stop Count, 2729, 98, 0, OK Reallocated Sectors Count,0, 200, 140, OK Seek Error Rate, 0, 100, 51, OK Power-On Hours (POH), 1057, 99, 0, OK Spin Retry Count, 0, 100, 51, OK Recalibration Retries ,0, 100, 51 , OK Power Cycle Count, 1385, 99, 0, OK Power-off Retract Count, 425, 200, 0, OK Load /Unload Cycle Count,12974, 196, 0, OK Temperature, 43, 43, 0, OK Reallocation Event Count,0, 200, 0, OK Current Pending Sector Count,23,200, 0, Degradation Uncorrectable Sector Count, 0, 100, 0, OK UltraDMA CRC Error Count,6, 200, 0, OK Write Error Rate/Multi-Zone Error Rate,0,100,51, OK It seems that the most important thing is this line Current Pending Sector Count,23,200, 0, Degradation Any idea on that?

Read the article

How does the "Steam" platform work? Is it DRM? Can I trust "Steam"-powered games?

- by Chris W. Rea

So – I just bought the new game Supreme Commander 2. This question is not about the game, but about the online software installation platform that it seems to require. I haven't bought a game in a long time, and I'm puzzled: Apparently, SC2 is a "Steam"-powered game. When I went to install the game, it asked me to either create a new Steam account, or log in with an existing account. I clicked "Cancel" because I don't plan to play online and I don't want anything unnecessary installed on my computer, since I only plan to play single player! However, after clicking "Cancel", the installer asked for my confirmation that I indeed wanted to cancel installation of the game! I thought I was just canceling the "online" portions! So I really want to know: How do "Steam" powered games work? Is this essentially a form of DRM (Digital Rights Management)? Can I trust this software platform? Has anybody done any independent verification on how this platform works? (I'm very leery of any DRM after the Sony BMG CD copy protection scandal. Thank goodness for Mark Russinovich.) Does the "Steam" platform install anything particularly nasty or unwanted on my computer?

Read the article

Is wiper.sh working?

- by Aleksander Blomskøld

I'm setting up a server running Ubuntu Precise, and I'm trying to verify if SSD TRIM is working. fstrim is failing: ~ sudo fstrim -v / fstrim: /: FITRIM ioctl failed: Operation not supported So I tried wiper.sh in hdparm: wiper-3.5 sudo ./wiper.sh --verbose --commit /dev/sda1 wiper.sh: Linux SATA SSD TRIM utility, version 3.5, by Mark Lord. rootdev=/dev/sda1 fsmode2: fsmode=read-write /: fstype=ext4 freesize = 169502088 KB, reserved = 1695020 KB Preparing for online TRIM of free space on /dev/sda1 (ext4 mounted read-write at /). This operation could silently destroy your data. Are you sure (y/N)? y Creating temporary file (167807068 KB).. Syncing disks.. Beginning TRIM operations.. get_trimlist=/sbin/hdparm --fibmap WIPER_TMPFILE.11503 /dev/sda: trimming 3211263 sectors from 64 ranges succeeded trimming 3571713 sectors from 64 ranges succeeded trimming 3915776 sectors from 64 ranges succeeded (...) trimming 3657913 sectors from 60 ranges succeeded Removing temporary file.. Syncing disks.. Done. It seems to be working, but I'm wondering if it really is. Are there any cases where wiper.sh should work when fstrim isn't? Is there any way I can check if the TRIMing actually has succeeded (other than trusting the wiper.sh-log)?

Read the article

Exchange Connector Won't Send to External Domains

- by sisdog

I'm a developer trying to get my .Net application to send emails out through our Exchange server. I'm not an Exchange expert so I'll qualify that up front!! We've set up a receive Connector in Exchange that has the following properties: Network: allows all IP addresses via port 25. Authentication: Transport Layer Security and Externally Secured checkboxes are checked. Permission Groups: Anonymous Users and Exchange Servers checkboxes are checked. But, when I run this Powershell statement right on our Exchange server it works when I send to a local domain address but when I try to send to a remote domain it fails. WORKS: C:\Windows\system32Send-Mailmessage -To [email protected] -From [email protected] -Subject testing -Body testing -SmtpServer OURSERVER (BTW: my value for OURSERVER=boxname.domainname.local. This is the same fully-qualified name that shows up in our Exchange Management Shell when I launch it). FAILS: C:\Windows\system32Send-Mailmessage -To [email protected] -From [email protected] -Subject testing -Body testing -SmtpServer OURSERVER Send-MailMessage : Mailbox unavailable. The server response was: 5.7.1 Unable to relay At line:1 char:17 + Send-Mailmessage <<<< -To [email protected] -From [email protected] -Subject testing -Body himom -SmtpServer FTI-EX + CategoryInfo : InvalidOperation: (System.Net.Mail.SmtpClient:SmtpClient) [Send-MailMessage], SmtpFailed RecipientException + FullyQualifiedErrorId : SmtpException,Microsoft.PowerShell.Commands.SendMailMessage EDIT: From @TheCleaner 's advice, I ran the Add-ADPermission to the relay and it didn't help; [PS] C:\Windows\system32Get-ReceiveConnector "Allowed Relay" | Add-ADPermission -User "NT AUTHORITY\ANONYMOUS LOGON" -E xtendedRights "Ms-Exch-SMTP-Accept-Any-Recipient" Identity User Deny Inherited -------- ---- ---- --------- FTI-EX\Allowed Relay NT AUTHORITY\ANON... False False Thanks for the help. Mark

Read the article

Best shortcut in Total Commander

- by life-warrior

So, what's your favourite TC shortcut or shortcut combination ? Which one do you use and for what purpose ? Among my most often used: Ctrl-Left ( or Ctrl-Right ) - open archive or folder under cursor in opposite tab. Ctrl-Shift-Enter, Alt-F8, Ctrl-X - copy full file path to clipboard. Shift-F6, Shift-End(if needed), Ctrl-C - copy only file name w/o path. Select files, Ctrl-M - multi-rename, for example remove "DVDrip" from file names. Ctrl-\ - go to root directory. Ctrl-D, - go to directory with highlighted letter specified. For example, name a downloads directory "&Downloads" in favourites, and the letter after ampersand will be highlighted. Alt-F7, feed to listbox, Ctrl-A, Mark(menu)-Save selection to file - creates a file with all files and directories inside current, with full path. Ctrl-[3-6] - sort files by name(3), extension(4), date(5), size(6). For example, Sort by name, when you need movies and soundracks with the same name and different extension to group them together. Sort by extension, when you need to find EXEs in Windows directory. Sort by Date, when you need to find the latest file downloaded in your dir. Sort by size, when you need to delete the largest files for free space.

Read the article

Puppet : How to override / redefine outside child class (usecase and example detailled)

- by alex8657

The use case i try to illustrate is when to declare some item (eq mysqld service) with a default configuration that could be included on every node (class stripdown in the example, for basenode), and still be able to override this same item in some specific class (eg mysql::server), to be included by specific nodes (eg myserver.local) I illustrated this use case with the example below, where i want to disable mysql service on all nodes, but activate it on a specific node. But of course, Puppet parsing fails because the Service[mysql] is included twice. And of course, class mysql::server bears no relation to be a child of class stripdown Is there a way to override the Service["mysql"], or mark it as the main one, or whatever ? I was thinking about the virtual items and the realize function, but it only permits apply an item multiple times, not to redefine or override. # In stripdown.pp : class stripdown { service {"mysql": enable => "false", ensure => "stopped" } } # In mysql.pp : class mysql::server { service { mysqld: enable => true, ensure => running, hasrestart => true, hasstatus => true, path => "/etc/init.d/mysql", require => Package["mysql-server"], } } # Then nodes in nodes.pp : node basenode { include stripdown } node myserver.local inherits basenode { include mysql::server` # BOOM, fails here because of Service["mysql"] redefinition }

Read the article

Intermittent Trouble Entering Hibernate on WinXP

- by kquinn

My personal desktop, running 32-bit Windows XP SP2 (with 4GB RAM, 2.75GB addressable, swap disabled, hiberfil.sys existing and contiguous on C:\; SP3 is not installed because SP2 has been working fine and I do not want to re-qualify with SP3 just for sheer perversity) typically gets hibernated at night. For a long time this worked great, but recently the machine has had trouble entering hibernation. Sometimes when I press my power button (configured to hibernate), the box will start the procedure for hibernating (i.e., go to the blue "Windows XP" background logo and display a message about entering hibernation), but before displaying the usual blue-on-black hibernation progress bar it will drop back to the desktop. No error messages appear, on screen or in the system log. The only record of unsuccessful hibernation attempts in the system log, which proudly proclaims that "The Windows Image Acquisition (WIA) service entered the running state." once per failed hibernation attempt. The problem is almost certainly resource related: if I then close one or more applications which are running, and repeat the exact same process, the machine will hibernate perfectly. There does not appear to be a reliable high-water mark for virtual or physical memory use, below which the machine is guaranteed to hibernate; it's different every time (though typically, below about 1.1–1.4 GB memory usage seems to be where hibernate succeeds most often). Memory may not even be the relevant resource; as far as I know, it could also be handles or sockets. This behavior is relatively recent: it has only started in the last few months; before then, I could hibernate reliably no matter what the current resource use of the system. This machine claims to have hotfix Q909095 installed, but since the symptoms of my problem match KB909095 rather well, I'm suspicious if this fix is actually working as intended. Any ideas on how to fix this or where to start debugging?

Read the article

Removing/modifying LDAP objectclasses/attributes using olc

- by Foezjie

I'm having trouble using openldap's olc to modify a schema without shutting down the server. To test some things out, I made the following schema: objectIdentifier tests orgUlyssisOID:4 objectIdentifier testAttribute tests:1 objectIdentifier testObjectClass tests:2 attributeType ( testAttribute:1 NAME 'attr1' DESC 'attribuut 1' SYNTAX '1.3.6.1.4.1.1466.115.121.1.40' ) attributeType ( testAttribute:2 NAME 'attr2' DESC 'attribuut 2' SUP userPassword SINGLE-VALUE ) objectclass ( testObjectClass:1 NAME 'class1' DESC 'objectclass 1' SUP top STRUCTURAL MUST (attr1 $ attr2 ) ) And added it to a new schema called test. (cn={9}test.ldif in cn=schema). Now I can't seem to figure out how to delete class1 from that schema. I use the following LDIF (and tried lots of variations too, to no avail) dn : cn={9}test,cn=schema,cn=config changetype: modify delete: olcObjectClasses olcObjectClasses: ( testObjectClass:1 NAME 'class1' DESC 'objectclass 1' SUP top STRUCTURAL MUST ( attr1 $ attr2 ) ) Running ldapmodify -x -W -D cn=admin,cn=config -f test.ldif -d 0 gives no output. -d 1 gives this: ldap_create ldap_sasl_bind ldap_send_initial_request ldap_new_connection 1 1 0 ldap_int_open_connection ldap_connect_to_host: TCP localhost:389 ldap_new_socket: 4 ldap_prepare_socket: 4 ldap_connect_to_host: Trying 127.0.0.1:389 ldap_pvt_connect: fd: 4 tm: -1 async: 0 ldap_open_defconn: successful ldap_send_server_request ber_scanf fmt ({it) ber: ber_scanf fmt ({i) ber: ber_flush2: 38 bytes to sd 4 ldap_result ld 0x7f2a8ccf3430 msgid 1 wait4msg ld 0x7f2a8ccf3430 msgid 1 (infinite timeout) wait4msg continue ld 0x7f2a8ccf3430 msgid 1 all 1 ** ld 0x7f2a8ccf3430 Connections: * host: localhost port: 389 (default) refcnt: 2 status: Connected last used: Mon Sep 10 11:29:57 2012 ** ld 0x7f2a8ccf3430 Outstanding Requests: * msgid 1, origid 1, status InProgress outstanding referrals 0, parent count 0 ld 0x7f2a8ccf3430 request count 1 (abandoned 0) ** ld 0x7f2a8ccf3430 Response Queue: Empty ld 0x7f2a8ccf3430 response count 0 ldap_chkResponseList ld 0x7f2a8ccf3430 msgid 1 all 1 ldap_chkResponseList returns ld 0x7f2a8ccf3430 NULL ldap_int_select read1msg: ld 0x7f2a8ccf3430 msgid 1 all 1 ber_get_next ber_get_next: tag 0x30 len 12 contents: read1msg: ld 0x7f2a8ccf3430 msgid 1 message type bind ber_scanf fmt ({eAA) ber: read1msg: ld 0x7f2a8ccf3430 0 new referrals read1msg: mark request completed, ld 0x7f2a8ccf3430 msgid 1 request done: ld 0x7f2a8ccf3430 msgid 1 res_errno: 0, res_error: <>, res_matched: <> ldap_free_request (origid 1, msgid 1) ldap_parse_result ber_scanf fmt ({iAA) ber: ber_scanf fmt (}) ber: ldap_msgfree ldap_free_connection 1 1 ldap_send_unbind ber_flush2: 7 bytes to sd 4 ldap_free_connection: actually freed So no real indication of an error. Where am I doing it wrong? Bonus question: If I have some entries of a certain objectclass, can I modify it (add/remove attributeTypes) without removing the entries? Thanks in advance for all help.

Read the article

Plesk: Spamassassin ignores emails to redirected accounts

- by Mat

When I set up email redirects within Plesk 9.5, Spamassassin ignores all emails sent to the redirected address and only scans emails that are sent directly to the address which has a mailbox. Steps to reproduce Set up two mail accounts: [email protected] as a proper email account with a mailbox and [email protected] with all emails redirected to [email protected]. (It doesn't make a difference, if [email protected] has a mailbox enabled or not.) [email protected] -> [email protected] Set up the spam filter on both accounts. I set mine to delete spam right away, but you can just keep the default ("mark as spam"). Now, when you send an emails to [email protected], it will have Spamassassins tags in the email header, but when you send emails to [email protected], they will end up in the same mailbox but will have no spamassassin tags in the emails header and they will not be scanned. Other notes I am using Plesk 9.5.4 on Ubuntu 8.04 LTS with the default Qmail. I've observed this bug since Plesk 8, but I can't stand it any more and would appreciate any hack or fix.

Read the article

Using fedora 17 commandline 'mail' program cannot send to hotmail

- by Eric Leschinski

I am trying to use the console in Fedora 17 to send an automated email to myself. I run this: echo "email content" | mail -s "blah" [email protected] It works fine, google treats it as a spam email, but when you mark it not spam everything is cool. For Hotmail there are policies to prevent the email from being sent. I do this: echo "email content" | mail -s "blah" [email protected] And the email returns as undeliverable, the email does not even appear in the spam folder and I get this as a response: ----- Transcript of session follows ----- ... while talking to mx3.hotmail.com.: >>> MAIL From:<[email protected]> SIZE=685 <<< 550 DY-001 (BAY0-MC3-F8) Unfortunately, messages from 184.90.101.28 weren't sent. Please contact your +Internet service provider. You can tell them that Hotmail does not relay dynamically-assigned IP ranges. +You can also refer your provider to http://mail.live.com/mail/troubleshooting.aspx#errors. 554 5.0.0 Service unavailable So apparently hotmail doesn't like spammers so much, they they are blocking anything with a dynamically assigned IP range. Google does not do this. What is the easiest way to just get around this and send an email to hotmail and end up in their spam folder to be unblocked later by the user?

Read the article

Intermittent extrememly long response times when downloading documents

- by pap

I have a Java web application running om Tomcat 7 with an Apache httpd 2.2 fronting with mod_jk/AJP. One part of the application is serving files (up to 4mb size). Now, normally this all runs very smooth with stable, low response-times. However, in rare instances (<0.1% of downloads), the downloadtime will go beyond 1 minute. After activating the ThreadStuckValve in Tomcat, I can see that the long responses seem to be stuck at org.apache.tomcat.jni.Socket.sendbb(Native method) i.e network I/O. At most, these long-running downloads take 5 minutes, which I strongly suspect is because of the default 300 second timout in Apache 2.2 (http://httpd.apache.org/docs/2.2/mod/core.html, "TimeOut directive"). To me, this looks like network problems. The Apache timeout (if that is what is kicking in at the 5 minute mark) indicates that ACK packets are not being transmitted correctly. My questions are what could be causing this? Closed browser at receiving end but socket not signaled as closed properly? Packet loss or some other network failure in transit? Where would I start troubleshooting this? We're running Tomcat and Apache on Windows server 2008-R2 in a vmware virtualized server.

Search Results

Search found 4275 results on 171 pages for 'mark stephens'.

Page 141/171 | < Previous Page | 137 138 139 140 141 142 143 144 145 146 147 148 | Next Page >

- by jordon_user

- by DanH

- by Richard

- by Ty W

- by Alex

- by Smith.Lai

- by Ole_Brun

- by Knox

- by Swapneel Patnekar

- by Mica

- by doug

- by Chris W. Rea

- by Gaz Davidson

- by GolezTrol

- by mahmood

- by Chris W. Rea

- by Aleksander Blomskøld

- by sisdog

- by life-warrior

- by alex8657

- by kquinn

- by Foezjie

- by Mat

- by Eric Leschinski

- by pap

< Previous Page | 137 138 139 140 141 142 143 144 145 146 147 148 | Next Page >