Search Results

Search found 23762 results on 951 pages for 'network speed'.

Page 141/951 | < Previous Page | 137 138 139 140 141 142 143 144 145 146 147 148  | Next Page >

• Automatically repair network connection when it goes down.

  - by Spines

  Every hour or so my wireless router goes down, and everyone connected loses internet for a couple minutes. If I right click on my network connection and choose repair, I usually get internet back quicker. Is there a way I can automatically have it try to repair the connection once it goes down? Can I write a program to do this if there isn't a built in windows setting? BTW I'm using Windows XP. EDIT:My router is a Linksys WRT110 with Firmware Version: 1.0.04, and I have cable internet. The signal is 100%. I live in an apartment complex and there are about 15 other wifi networks visible to me, not sure if that has any effect.

  Read the article

• Setting up a wireless network with Verizon MiFi

  - by winarm

  I am trying to set up a home network. I live in a location without cable internet so I have a Verizon MiFi card. I have a few laptops at the moment and they each connect through the card but I want to set up an Ubuntu 10.10 server and see if I can use it for DHCP. I have a Trendnet TEG-S50G switch and the computer I plan to use for the server has a Linksys WMP-11 Wireless PCI card. Is there any other equipment I need in order to get this to work? Is this even doable? Is there a better way to make this happen?

  Read the article

• Can't add a network printer - Windows 7

  - by r0ca

  Hi all, I have an HP 2600n installed on a SBS2003 server. This printer works fine when I print from the server itself and also from my Windows 7 computer #1. From my Windows 7 #2, it doesn't work. I get the error message that I need to install the driver. The error message is in french but here it the translation. No drivers has been found Windows is unable to find a driver for HP Color Laserjet 2600n on the network. To find a driver manually, click ok. If not, click on cancel and contact your sys adm. I reinstalled from scratch the printer, deleted the driver... Still no luck Any takers?

  Read the article

• Bind DHCP Server to Network Bridge

  - by Luke

  My wireless router died, so I decided to route everything through my server. So I installed a second NIC and a wireless card to be my new network: 1 NIC to the Modem, 1 NIC to the switch, and the Wireless to... Well, wireless. Anyways, I got far enough to get DHCP to work on just ONE adapter when I used Internet Connection Sharing (I couldn't get RRAS set up for the life of me), then I decided to try bridging the wireless and second NIC. Now, the DHCP server won't bind to the bridge, but I can enter manual IP's in my clients and it'll connect to the Internet. I also tried changing my wireless adapter's IP to 192.168.0.2, and to 192.168.1.1 to try to set up a separate scope, but to no avail. Running Windows Server 2003

  Read the article

• SNMP based network discovery (switches), device (ports on switches) power management

  - by SaM

  In a enterprise network, what would be the right way to generate a list of switches (SNMP managed) Is it reasonable to ask the organization to supply a list such as this: Switch name IP Address of switch Location SNMP community strings Or are there standard ways to run discovery scans - UDP broadcasts? After having generated a repository such as the above; given a single switch, how to query it for the list of all devices attached to it? Finally, how to selectively power down/power up ports? (remotely - using SNMP) Platform is going to be .NET based (C#) and the library being used is SharpSNMP

  Read the article

• Cross platform support for network attached USB hubs?

  - by larsks

  I am looking at network-attached USB hubs in order to run licensed software in a virtualized environment when hardware dongles are required. Are there any solutions that will work with both Linux and Windows? Most of the dedicated devices -- such as the Zonet ZUH2214 or the (oddly expensive) Digi AnywherUSB/2 -- appear to be Windows-only. Linux has the the USB/IP project, for which there appear to be Windows drivers, but the last "News" post on the site was in 2007, so I'm not entirely confident about the viability of the project. Has anyone out there found a solution that will work well in both environments?

  Read the article

• Slow network file access with VMWare Server and Windows 7

  - by garethm

  I have Windows 7 32-bit virtual machine running in a VMWare Server virtual machine. The host is Windows 7 64-bit. When I copy files between them it is extremely slow - it will take several minutes to copy even a 1 MB file. I can upload the file to an website and then download it again almost instantaneously by comparison. Browsing the network is quite zippy and has no problems. I have been unable to set up a HomeGroup between the computers though - the guest always times out without managing to get setup. Any ideas on how I should go about tracking down where the problem is?

  Read the article

• Excel 2003 opening files on network

  - by Luke

  The network is laid out with an XP Pro computer as the server hosting files, then 3 XP computers connecting to it for filesharing, all on it's own router. One computer can open .xls files no problem, and she runs Office XP. The other two computers run Office 2003, and cannot open any shared files by double-clicking them, or by selecting File-Open in Excel. If the file gets copied to the local computer, it opens instantly. I have tried disabling the AV on all computers, disabling the Windows firewall, and doublechecking permissions on the server. I have also tried disabling DDE, but that doesn't help at all, just like Tools-Options-unticking Ignore other applications. Any ideas? This apparently started a couple days ago

  Read the article

• Configure ASP.NET Application to Read Mapped Network Drive

  - by Bob

  Is it possible to configure an ASP.NET application under IIS 7 so it can read files stored in a mapped network drive? I'm not trying to serve up the contents of the drive. I simply need to read the contents within the ASP.NET application. I've searched the Web and haven't really found a solid answer. The questions in my mind are: Is this possible via configuration (i.e. I cannot modify the client code)? If so, what are the step by step instructions. If it is not possible, I'm fine with that. I already know UNC paths work but using them drastically changes the work flow. Thanks! Bobby

  Read the article

• Cannot run setups from a mapped network drive on Windows 7

  - by Dimitri C.

  I'm trying to run an application setup by double-clicking the setup.exe from within Windows Explorer. The file is located on a mapped network drive, and I'm using Windows 7. This results in the following error message: The specified path does not exist. Check the path, and then try again. The workaround I found is to copy the installer to the main hard drive (c:) and run it from there; however, this is rather inconvenient. The same action did work on Windows 2000, Windows XP and Windows Vista. I have the impression that the problem only occurs with installers, as everything seemed to work fine with regular exe's. Is there anyone who can explain this odd behavior?

  Read the article

• How to Make Red zone Network settings to Endian OS

  - by Gash

  Please help me, Currently we have about 10 pc's sharing internet. and We have CISCO 800 series router that connect the ADSL, to the lan Segment it connect switch throw the switch all pc's are getting connecting. all user pc's having 192.168.3.--- range ips and gateway is 192.168.3.254 now i install the endian firewall to one PC, it must work as firewall,VPN & proxy i made green zone ip as 192.168.3.222 then how to give red zone IP? i know that is static IP but it cant be same range so please help me out to sort this without changing anything in router, if want i can change the internal IP sets instead of 3.-- 10.-- or something like that and also please state me at present i tried Endian firewall red and green zone cables are pluged in to network switch only please help me to overcome this its urgent

  Read the article

• local cache for NAS or network folder

  - by HugoRune

  I am planning to build a network attached storage (NAS) server. Is there a way to cache frequently acccessed files from the remote storage automatically on the local PC? (I am not looking for a way to sync whole folders like rsync, but rather something that automatically and transparently caches the last accessed 50 gb of files.) Ideally I am searching for something that caches writes as well as reads, since only one pc will be accessing the server (and one day of lost changes if the local cache is damaged would be acceptable) I looked into windows offline files, but as far as I could tell this requires manual interaction to disconnect the server or go into offline mode in order to use the cache. The server would probably be running Linux or freeNAS, the pc runs Windows xp, but could be upgraded to 7 if required.

  Read the article

• Two network cards in one Windows 7 PC

  - by Martin

  Hi, I've upgraded from Vista to Windows 7. On Vista I used to run one network card (Intel 82566DC -2 Gigabit) for my internet which was connected to a Dovado USB mobile broadband router connected to a 3G modem. The IP setup on the card is set on DHCP. The second card (3com Ethernet link) was used to connect to our town's local WUG (wireless user group) and all worked fine. Now the problem I have with Windows 7 is that when I connect to the internet with the (Intel) first card, the internet work fine but as soon as I connect the second card to the wug my internet drops. If I then disconnect the first card (internet one) and try to connect to the wug it works. It seems that the two cards are fighting each other. Is there maybe something I can do to fix the problem? As you probably can gather from this post is that I am not an expert on PC's so please if you do answer do I in simple terms. :) Thanks, Martin

  Read the article

• SBS 2003 no network connection and acting strangely a bunch of Event ID 13568

  - by JMan78

  I've got an SBS 2003 Standard server and it was running fine until earlier today when it was rebooted, after the reboot it has no network connection, I can't seem to right click on a lot of stuff and get dialog boxes, I can't launch IE, it's acting extremely strange. We are dead in the water at this point. I checked the event logs and noticed we're getting a ton of Event ID's 13568. I thought it was a Journal Wrap error, and while I was going to try to fix it using this article: http://support.microsoft.com/kb/290762 I can't even do that because after I set the D4 value, then went to restart NTFRS from command prompt and I got the following: System Error 1059 has occurred. Circular service dependency was specified. That is where I'm at and haven't been able to figure anything else out. ALso, I've posted this on EE, there are some screens of event logs and such there: http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Server/SBS_Small_Business_Server/Q_27969593.html

  Read the article

• Windows Server 2008 (sp2) stops responding on network share requests from Windows Vista and 7 client

  - by Peter LaComb Jr.

  I have two Windows Server 2008 SP2 machines (TFS and TFSBUILD). Periodically, the TFSBUILD server shares (\TFSBUILD\ShareName or \TFSBUILD\C$) become unresponsive to requests from Windows Vista (Server 2008) and Windows 7 client requests. Windows XP machines are still able to connect. No events in the server log indicate any problem. A simple restart corrects the issue temporarily, but it always returns. No, it is not this http://support.microsoft.com/kb/976266 (we aren't using that software). All anti-virus software has been disabled, firewall is disabled by policy. No other network activity is affected. Any help would be greatly appreciated.

  Read the article

• IBM Tivoli Network Manager IP Edition - Job does not run

  - by Thorsten Niehues

  Since our network discovery takes too long I tried to split the biggest job into two parts. The two parts use the same Perl script but have a different scope. I copied a Job (Agent) doing the following: Copied the .agnt file Copied the associated perl script The problem is that one or the other job (changes randomly) does not run. The Disco Process will fail eventually. In the log of the job which does not run I see the following error message: Wed Jul 18 08:48:54 2012 Warning: Failed to send on transport layer found in file CRivObjSockClient.cc at line 1293 - Client My_MacTable_Cis is not connected to service Helper How do I fix this problem?

  Read the article

• MAC and PC problems on home network

  - by tombull89

  Hello! At home we have a wireless router that my family want to use. We have our main computer physically connected to the router, and my laptop is connected wirelessly. When the network is like this then it is faultless. However, when my brother introduces is Apple MAC into the equation, both my laptop and the family machine gets all sorts of problems, primarily long load times and timeouts. The MAC, however, works fine. I think I've read something here or SF about a MAC continusly pinging a router which times it out, but I've not found any solution so far. Router: Belkin F5D7634uk4A-H Home Computer: XP SP3 My Laptop: Windows 7, Ultimate Mac: 13" Macbook Pro, Snow Lepoard

  Read the article

• Virutal Machine loses network connectivity on Hyper V

  - by Chris W

  We're running a number of VMs on a 6 node failover cluster of blades using Hyper V. We have an intermittent issue (every few days at different times - not a fixed frequency) of VMs losing network connectivity. Console access to the VM suggests all is fine and the underlying blade has normal connectivity. To resolve the problem we either have to re-start the VM or, more usually, we do a live migration to another blade which fires up connectivity and we then migrate it back to the original blade. I've had 3 instances of this happen with a specific VM running on a particular blade however it has happened once with a different VM running on a different blade. All VMs and blades have the same basic setup and are running Windows 2008 R2. Any ideas where I should be looking to diagnose the possible causes of this problem as the event logs provide no help?

  Read the article

• Can't access VirtualBox host-only network from windows host

  - by Markus Orreilly

  I've got two vms running on a windows host, each with a host-only network and ips in the 192.168.56.XXX range. One of them is running apache and serving some content that I want to access from my windows host. However, the windows host can't access the apache server at all. The server is running on 192.168.56.103. ipconfig from windows says it's ip for the Virtual Box interface is 169.254.143.37. I tried route add to route 192.168.56.XX traffic, but everything I tried didn't work and I was probably using it wrong. Any ideas on how to make this work?

  Read the article

• Exposing the AnyConnect HTTPS service to outside network

  - by Maciej Swic

  We have a Cisco ASA 5505 with firmware ASA9.0(1) and ASDM 7.0(2). It is configured with a public ip address, and when trying to reach it from the outside by HTTPS for AnyConnect VPN, we get the following log output: 6 Nov 12 2012 07:01:40 <client-ip> 51000 <asa-ip> 443 Built inbound TCP connection 2889 for outside:<client-ip>/51000 (<client-ip>/51000) to identity:<asa-ip>/443 (<asa-ip>/443) 6 Nov 12 2012 07:01:40 <client-ip> 50999 <asa-ip> 443 Built inbound TCP connection 2890 for outside:<client-ip>/50999 (<client-ip>/50999) to identity:<asa-ip>/443 (<asa-ip>/443) 6 Nov 12 2012 07:01:40 <client-ip> 51000 <asa-ip> 443 Teardown TCP connection 2889 for outside:<client-ip>/51000 to identity:<asa-ip>/443 duration 0:00:00 bytes 0 No valid adjacency 6 Nov 12 2012 07:01:40 <client-ip> 50999 <asa-ip> 443 Teardown TCP connection 2890 for outside:<client-ip>/50999 to identity:<asa-ip>/443 duration 0:00:00 bytes 0 No valid adjacency We finished the startup wizard and the anyconnect vpn wizard and here is the resulting configuration: Cryptochecksum: 12262d68 23b0d136 bb55644a 9c08f86b : Saved : Written by enable_15 at 07:08:30.519 UTC Mon Nov 12 2012 ! ASA Version 9.0(1) ! hostname vpn domain-name office.<redacted>.com enable password <redacted> encrypted passwd <redacted> encrypted names ip local pool vpn-pool 192.168.67.2-192.168.67.253 mask 255.255.255.0 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.68.250 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address <redacted> 255.255.255.248 ! ftp mode passive dns server-group DefaultDNS domain-name office.<redacted>.com object network obj_any subnet 0.0.0.0 0.0.0.0 pager lines 24 logging enable logging asdm informational mtu outside 1500 mtu inside 1500 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 no arp permit-nonconnected ! object network obj_any nat (inside,outside) dynamic interface timeout xlate 3:00:00 timeout pat-xlate 0:00:30 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy user-identity default-domain LOCAL http server enable http 192.168.68.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart crypto ipsec ikev2 ipsec-proposal DES protocol esp encryption des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal 3DES protocol esp encryption 3des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES protocol esp encryption aes protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES192 protocol esp encryption aes-192 protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES256 protocol esp encryption aes-256 protocol esp integrity sha-1 md5 crypto ipsec security-association pmtu-aging infinite crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto map inside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map inside_map interface inside crypto ca trustpoint _SmartCallHome_ServerCA crl configure crypto ca trustpoint ASDM_TrustPoint0 enrollment self subject-name CN=vpn proxy-ldc-issuer crl configure crypto ca trustpool policy crypto ca certificate chain _SmartCallHome_ServerCA certificate ca 6ecc7aa5a7032009b8cebcf4e952d491 <redacted> quit crypto ca certificate chain ASDM_TrustPoint0 certificate f678a050 <redacted> quit crypto ikev2 policy 1 encryption aes-256 integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 10 encryption aes-192 integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 20 encryption aes integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 30 encryption 3des integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 40 encryption des integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 enable outside client-services port 443 crypto ikev2 remote-access trustpoint ASDM_TrustPoint0 telnet timeout 5 ssh 192.168.68.0 255.255.255.0 inside ssh timeout 5 console timeout 0 vpn-addr-assign local reuse-delay 60 dhcpd auto_config outside ! dhcpd address 192.168.68.254-192.168.68.254 inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept ssl trust-point ASDM_TrustPoint0 inside ssl trust-point ASDM_TrustPoint0 outside webvpn enable outside enable inside anyconnect image disk0:/anyconnect-win-3.1.01065-k9.pkg 1 anyconnect image disk0:/anyconnect-linux-3.1.01065-k9.pkg 2 anyconnect image disk0:/anyconnect-macosx-i386-3.1.01065-k9.pkg 3 anyconnect profiles GM-AnyConnect_client_profile disk0:/GM-AnyConnect_client_profile.xml anyconnect enable tunnel-group-list enable group-policy GroupPolicy_GM-AnyConnect internal group-policy GroupPolicy_GM-AnyConnect attributes wins-server none dns-server value 192.168.68.254 vpn-tunnel-protocol ikev2 ssl-client default-domain value office.<redacted>.com webvpn anyconnect profiles value GM-AnyConnect_client_profile type user username <redacted> password <redacted> encrypted tunnel-group GM-AnyConnect type remote-access tunnel-group GM-AnyConnect general-attributes address-pool vpn-pool default-group-policy GroupPolicy_GM-AnyConnect tunnel-group GM-AnyConnect webvpn-attributes group-alias GM-AnyConnect enable ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options ! service-policy global_policy global prompt hostname context call-home reporting anonymous Cryptochecksum:12262d6823b0d136bb55644a9c08f86b : end Clearly we are missing something, but the question is, what?

  Read the article

• Connecting Small business network to Azure Site to Site VPN

  - by MarkKGreenway

  Would like to have connectivity between azure virtual machines and on LAN users. My current network has a Cisco ISA550 connected to the WAN (one Ethernet cable into the office the fiber transceiver is on a different floor)and any public servers can be one-to one NAT-ed to have a public and private IP. What is the best way to get a reliable connection. Between end users and the cloud? I want to know the preferred on site endpoint. Do the azure vm's have to have a local ip in the LAN subnet? (Right now 10.10.0.0/20 or 255.255.240.0 to give room if this is the case). If in purchased an asa550 would I put it behind or in front of the isa550. Would it be ahead or peer with the users switches? What is the best way to get a reliable connection. Between end users and the cloud servers?

  Read the article

• Utility to unmap a network drive when the screen saver starts

  - by JimR

  I'm looking for a way to unmap network drives when the screen saver turns on. I have a few users that share an external, encrypted drive (Samba share, not windows) and they have a requirement to disconnect the drive mapping when the local machine is idle. I'd also like it to warn them if there are open files on the mapped drive, if possible. There is also a requirement to force the password to be reentered before mapping when the machine comes back from idle. Is there a Windows setting or utility out there in the wild that meets these requirements?

  Read the article

• Network - Routers conflicting in my subnet

  - by Richard

  I have a router whose IP is 192.168.1.1 and I be experiencing conflict with another router on my subnet (which probably has 192.168.1.1 as IP too). I think when it tries to connect to the network, eventually taking the place of my router because when I try to access the config page of my router, which appears to me is a config page from another router that is not mine. Do you have any solution except to change the IP of my router to an IP not common? As I have set up the exclusivity that only my IP router? I work with dynamic IPs (wireless networking) and static (for wired). How do I? I just wanna to do some setting in my router that affects all other, so that doesn't conflicts anymore.

  Read the article

• Reset Network Load Balancer Connection Pool

  - by bill_the_loser

  I am currently working on load testing a web application on a virtual machine cluster. I am looking for a way to flush the connection pool / NLB cache so that it is like each machine connecting to the NLB is connecting for the first time and doesn't get directed back to the node that it was on last time. This a Windows 2003 Server cluster, behind a Microsoft software based Network Load Balancer. Additional Information: To do the load testing I'm using virtual machines, one for each node on the cluster. Somehow I got two virtual machines connecting to the same node and I'm looking for an easier way to reset those connections without going in to the NLB Manager and stopping and starting each node on the NLB. Update: We went ahead and changed the affinity on all of the nodes of the cluster to none. Now it's a non-issue.

  Read the article

• How can I scan documents from a Lexmark x543n over the network on OS X 10.6

  - by Thomas Lötzer

  Hi, I just got a Lexmark x543dn and have some trouble getting my computer to recognize it as a scanner. The printer is working fine from my OS X 10.6 machine, setup was as easy as it gets. I just connected it to my network, gave it a name and added it under that name as a networked printer in OS X. According to the Apple support website, the driver in OS X (I upgraded to the newest drivers already) should also provide scanning capabilities. However when I run the image capture app included in OS X it tells me that there are no scanners available. Can anybody tell me what I have to do to get OS X to recognize the scanner? Thanks, Thomas

  Read the article

< Previous Page | 137 138 139 140 141 142 143 144 145 146 147 148  | Next Page >