Search Results

Search found 7502 results on 301 pages for 'defective hardware'.

Page 142/301 | < Previous Page | 138 139 140 141 142 143 144 145 146 147 148 149  | Next Page >

• Why is my mouse lagging?

  - by Boris_yo

  Don't remember this from earlier, but my mouse is lagging when I refresh specific websites in Chrome and Firefox. I can't observe such lags with Internet Explorer. Here's a video i made I tested with AIDA64 and sometimes noticed very little and short lags. Here's a second video Any thoughts? Hardware And Software Information: DELL Latitude E6420 Windows 7 64-Bit Enterprise 8GB of RAM Razer DeathAdder Black Edition mouse Firmware: 1.00 Driver version: 1.02

  Read the article

• HP does not power off after shutdown (Vista)

  - by tommi

  My HP d330 does not properly shutdown, after Vista "shutting down" message the lcd screen goes black, but both HD + Power Leds remain on.. Any ideas? No entries in EventViewer about this. Keyboard leds no more work after this partial shutdown so I assume hardware is partially shutdown..? Same problem occurs when I choose Sleep from shutdown menu

  Read the article

• Accessing temperature data on ESXi5.1?

  - by Ovesh

  For ESXi5.1 (VMWare vSphere) images, I can see temperature data on the vSphere user interface (under Monitor / Hardware Status). I tried scouring the available snmp data using snmpwalk, but can't find the data anywhere in there. Maybe I'm missing something. Does anybody know the right MIB for temperature data? Otherwise, ow can that data be accessed? By the way, this is a machine installed from an image provided by HP.

  Read the article

• Debian Squeeze and available memory (1GB absent)

  - by user66279

  Hi, here I've a dedicated server with 12GB RAM and running Debian Lenny x64. dmesg | grep Memory [ 0.004000] Memory: 11917152k/12259740k available (2279k kernel code, 333820k reserved, 1022k data, 216k init) Since some days, I've another dedicated server (nearly same hardware), but with Debian Squeeze x64 (installed via debootstrap, Kernel 2.6.32-5-xen-amd64) dmesg | grep Memory [ 1.551510] Memory: 6864620k/8151916k available (3146k kernel code, 1057736k absent, 229560k reserved, 1901k data, 600k init) what does absent memory mean? And how can I get 1GB of RAM back?

  Read the article

• Quick method to determine SSD drive health?

  - by ewwhite

  I have an Intel X-25M drive that was marked "failed" twice in a ZFS storage array, as noted here. However, after removing the drive, it seems to to mount, read and write in other computers (Mac, PC, USB enclosure, etc.) Is there a good way to determine the drive's present health? I feel that the previous failure in the ZFS solution was the convergence of bugs, bad error reporting and hardware. It seems like this drive may have some life in it, though.

  Read the article

• VMWare Server 2.0 Physical disks

  - by heavyd

  I have a machine setup with VMWare Server 2.0. There are several VMs running on the VMWare server and I have several physical drives. I would like to give one of the VMs exclusive access to one entire physical drive. Is it possible to essential give a physical drive to one of the VMs and let it access it as if it were actual hardware?

  Read the article

• Android camera AVD error 100

  - by Cristian Voina

  I am trying to learn how to make a simple app in android. As background information I have only programmed in C language, no OOP. Currently I am trying turn on the camera using the indications from Android Developer site but some minor changes: - no button for capturing image. - no new activity. What I am trying to do is jut preview the camera. I will post the Code that I am using, the manifest and the LogCat. Main Activity: package com.example.camera_display; import android.app.Activity; import android.hardware.Camera; import android.os.Bundle; import android.view.Menu; import android.widget.FrameLayout; import android.widget.TextView; public class MainActivity extends Activity { private Camera mcamera; private CameraPreview mCameraPreview; @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.activity_main); mcamera = getCameraInstance(); mCameraPreview = new CameraPreview(this, mcamera); FrameLayout preview = (FrameLayout) findViewById(R.id.camera_preview); preview.addView(mCameraPreview); } public static Camera getCameraInstance(){ Camera c = null; try { c = Camera.open(); // attempt to get a Camera instance } catch (Exception e){ // Camera is not available (in use or does not exist) } return c; // returns null if camera is unavailable } @Override public boolean onCreateOptionsMenu(Menu menu) { // Inflate the menu; this adds items to the action bar if it is present. getMenuInflater().inflate(R.menu.main, menu); return true; } } CameraPreview Class: package com.example.camera_display; import java.io.IOException; import android.content.Context; import android.hardware.Camera; import android.util.Log; import android.view.SurfaceHolder; import android.view.SurfaceView; /** A basic Camera preview class */ public class CameraPreview extends SurfaceView implements SurfaceHolder.Callback { private static final String TAG = "MyActivity"; private SurfaceHolder mHolder; private Camera mCamera; public CameraPreview(Context context, Camera camera) { super(context); mCamera = camera; // Install a SurfaceHolder.Callback so we get notified when the // underlying surface is created and destroyed. mHolder = getHolder(); mHolder.addCallback(this); // deprecated setting, but required on Android versions prior to 3.0 mHolder.setType(SurfaceHolder.SURFACE_TYPE_PUSH_BUFFERS); } public void surfaceCreated(SurfaceHolder holder) { // The Surface has been created, now tell the camera where to draw the preview. try { mCamera.setPreviewDisplay(holder); mCamera.startPreview(); } catch (IOException e) { Log.d(TAG, "Error setting camera preview: " + e.getMessage()); } } public void surfaceDestroyed(SurfaceHolder holder) { // empty. Take care of releasing the Camera preview in your activity. } public void surfaceChanged(SurfaceHolder holder, int format, int w, int h) { // If your preview can change or rotate, take care of those events here. // Make sure to stop the preview before resizing or reformatting it. if (mHolder.getSurface() == null){ // preview surface does not exist return; } // stop preview before making changes try { mCamera.stopPreview(); } catch (Exception e){ // ignore: tried to stop a non-existent preview } // set preview size and make any resize, rotate or // reformatting changes here // start preview with new settings try { mCamera.setPreviewDisplay(mHolder); mCamera.startPreview(); } catch (Exception e){ Log.d(TAG, "Error starting camera preview: " + e.getMessage()); } } } Manifest: <uses-permission android:name="android.permission.CAMERA"/> <uses-feature android:name="android.hardware.camera"/> LOG CAT: 06-30 15:58:35.075: D/libEGL(1153): loaded /system/lib/egl/libEGL_emulation.so 06-30 15:58:35.147: D/(1153): HostConnection::get() New Host Connection established 0x2a156060, tid 1153 06-30 15:58:35.478: D/libEGL(1153): loaded /system/lib/egl/libGLESv1_CM_emulation.so 06-30 15:58:35.515: D/libEGL(1153): loaded /system/lib/egl/libGLESv2_emulation.so 06-30 15:58:36.334: W/EGL_emulation(1153): eglSurfaceAttrib not implemented 06-30 15:58:36.685: D/OpenGLRenderer(1153): Enabling debug mode 0 06-30 15:58:36.935: D/MyActivity(1153): Error starting camera preview: startPreview failed 06-30 15:58:36.965: I/Choreographer(1153): Skipped 125 frames! The application may be doing too much work on its main thread. 06-30 15:58:38.455: W/Camera(1153): Camera server died! 06-30 15:58:38.455: W/Camera(1153): ICamera died 06-30 15:58:38.476: E/Camera(1153): Error 100 So If anyone could tell me what I am doing wrong (and explain why it should be done different) that would be great :) Thanks!

  Read the article

• Fast multi-window rendering with C#

  - by seb

  I've been searching and testing different kind of rendering libraries for C# days for many weeks now. So far I haven't found a single library that works well on multi-windowed rendering setups. The requirement is to be able to run the program on 12+ monitor setups (financial charting) without latencies on a fast computer. Each window needs to update multiple times every second. While doing this CPU needs to do lots of intensive and time critical tasks so some of the burden has to be shifted to GPUs. That's where hardware rendering steps in, in another words DirectX or OpenGL. I have tried GDI+ with windows forms and figured it's way too slow for my needs. I have tried OpenGL via OpenTK (on windows forms control) which seemed decently quick (I still have some tests to run on it) but painfully difficult to get working properly (hard to find/program good text rendering libraries). Recently I tried DirectX9, DirectX10 and Direct2D with Windows forms via SharpDX. I tried a separate device for each window and a single device/multiple swap chains approaches. All of these resulted in very poor performance on multiple windows. For example if I set target FPS to 20 and open 4 full screen windows on different monitors the whole operating system starts lagging very badly. Rendering is simply clearing the screen to black, no primitives rendered. CPU usage on this test was about 0% and GPU usage about 10%, I don't understand what is the bottleneck here? My development computer is very fast, i7 2700k, AMD HD7900, 16GB ram so the tests should definitely run on this one. In comparison I did some DirectX9 tests on C++/Win32 API one device/multiple swap chains and I could open 100 windows spread all over the 4-monitor workspace (with 3d teapot rotating on them) and still had perfectly responsible operating system (fps was dropping of course on the rendering windows quite badly to around 5 which is what I would expect running 100 simultaneous renderings). Does anyone know any good ways to do multi-windowed rendering on C# or am I forced to re-write my program in C++ to get that performance (major pain)? I guess I'm giving OpenGL another shot before I go the C++ route... I'll report any findings here. Test methods for reference: For C# DirectX one-device multiple swapchain test I used the method from this excellent answer: Display Different images per monitor directX 10 Direct3D10 version: I created the d3d10device and DXGIFactory like this: D3DDev = new SharpDX.Direct3D10.Device(SharpDX.Direct3D10.DriverType.Hardware, SharpDX.Direct3D10.DeviceCreationFlags.None); DXGIFac = new SharpDX.DXGI.Factory(); Then initialized the rendering windows like this: var scd = new SwapChainDescription(); scd.BufferCount = 1; scd.ModeDescription = new ModeDescription(control.Width, control.Height, new Rational(60, 1), Format.R8G8B8A8_UNorm); scd.IsWindowed = true; scd.OutputHandle = control.Handle; scd.SampleDescription = new SampleDescription(1, 0); scd.SwapEffect = SwapEffect.Discard; scd.Usage = Usage.RenderTargetOutput; SC = new SwapChain(Parent.DXGIFac, Parent.D3DDev, scd); var backBuffer = Texture2D.FromSwapChain<Texture2D>(SC, 0); _rt = new RenderTargetView(Parent.D3DDev, backBuffer); Drawing command executed on each rendering iteration is simply: Parent.D3DDev.ClearRenderTargetView(_rt, new Color4(0, 0, 0, 0)); SC.Present(0, SharpDX.DXGI.PresentFlags.None); DirectX9 version is very similar: Device initialization: PresentParameters par = new PresentParameters(); par.PresentationInterval = PresentInterval.Immediate; par.Windowed = true; par.SwapEffect = SharpDX.Direct3D9.SwapEffect.Discard; par.PresentationInterval = PresentInterval.Immediate; par.AutoDepthStencilFormat = SharpDX.Direct3D9.Format.D16; par.EnableAutoDepthStencil = true; par.BackBufferFormat = SharpDX.Direct3D9.Format.X8R8G8B8; // firsthandle is the handle of first rendering window D3DDev = new SharpDX.Direct3D9.Device(new Direct3D(), 0, DeviceType.Hardware, firsthandle, CreateFlags.SoftwareVertexProcessing, par); Rendering window initialization: if (parent.D3DDev.SwapChainCount == 0) { SC = parent.D3DDev.GetSwapChain(0); } else { PresentParameters pp = new PresentParameters(); pp.Windowed = true; pp.SwapEffect = SharpDX.Direct3D9.SwapEffect.Discard; pp.BackBufferFormat = SharpDX.Direct3D9.Format.X8R8G8B8; pp.EnableAutoDepthStencil = true; pp.AutoDepthStencilFormat = SharpDX.Direct3D9.Format.D16; pp.PresentationInterval = PresentInterval.Immediate; SC = new SharpDX.Direct3D9.SwapChain(parent.D3DDev, pp); } Code for drawing loop: SharpDX.Direct3D9.Surface bb = SC.GetBackBuffer(0); Parent.D3DDev.SetRenderTarget(0, bb); Parent.D3DDev.Clear(ClearFlags.Target, Color.Black, 1f, 0); SC.Present(Present.None, new SharpDX.Rectangle(), new SharpDX.Rectangle(), HWND); bb.Dispose(); C++ DirectX9/Win32 API test with multiple swapchains and one device code is here: http://pastebin.com/tjnRvATJ It's a modified version from Kevin Harris's nice example code.

  Read the article

• How to associate Wi-Fi beacon info with a virtual "location"?

  - by leander

  We have a piece of embedded hardware that will sense 802.11 beacons, and we're using this to make a map of currently visible bssid -> signalStrength. Given this map, we would like to make a determination: Is this likely to be a location I have been to before? If so, what is its ID? If not, I should remember this location: generate a new ID. Now what should I store (and how should I store it) to make future determinations easier? This is for an augmented-reality app/game. We will be using it to associate particular characters and events with "locations". The device does not have internet or cellular access, so using a geolocation service is out of consideration for the time being. (We don't really need to know where we are in reality, just be able to determine if we return there.) It isn't crucial that it be extremely accurate, but it would be nice if it was tolerant to signal strength changes or the occasional missing beacon. It should be usable in relatively low numbers of access points (e.g. rural house with one wireless router) or many (wandering around a dense metropolis). In the case of a city, it should change location every few minutes of walking (continuously-overlapping signals make this a bit more tricky in naive code). A reasonable number of false positives (match a location when we aren't actually there) is acceptable. The wrong character/event showing up just adds a bit of variety. False negatives (no location match) are a bit more troublesome: this will tend to add a better-matching new location to the saved locations, masking the old one. While we will have additional logic to ensure locations that the device hasn't seen in a while will "orphan" any associated characters or events (if e.g. you move to a different country), we'd prefer not to mask and eventually orphan locations you do visit regularly. Some technical complications: signalStrength is returned as 1-4; presumably it's related to dB, but we are not sure exactly how; in my experiments it tends to stick to either 1 or 4, but occasionally we see numbers in between. (Tech docs on the hardware are sparse.) The device completes a scan of one-quarter of the channel space every second; so it takes about 4-5 seconds to get a complete picture of what's around. The list isn't always complete. (We are making strides to fix this using some slight sampling period randomization, as recommended by the library docs. We're also investigating ways to increase the number of scans without killing our performance; the hardware/libs are poorly behaved when it comes to saturating the bus.) We have only kilobytes to store our history. We have a "working" impl now, but it is relatively naive, and flaky in the face of real-world Wi-Fi behavior. Rough pseudocode: // recordLocation() -- only store strength 4 locations m_savedLocations[g_nextId++] = filterForStrengthGE( m_currentAPs, 4 ); // determineLocation() bestPoints = -inf; foreach ( oldLoc in m_savedLocations ) { points = 0.0; foreach ( ap in m_currentAPs ) { if ( oldLoc.has( ap ) ) { switch ( ap.signalStrength ) { case 3: points += 1.0; break; case 4: points += 2.0; break; } } } points /= oldLoc.numAPs; if ( points > bestPoints ) { bestLoc = oldLoc; bestPoints = points; } } if ( bestLoc && bestPoints > 1.0 ) { if ( bestPoints >= (2.0 - epsilon) ) { // near-perfect match. // update location with any new high-strength APs that have appeared bestLoc.addAPs( filterForStrengthGE( m_currentAPs, 4 ) ); } return bestLoc; } else { return NO_MATCH; } We record a location currently only when we have NO_MATCH and the app determines it's time for a new event. (The "near-perfect match" code above would appear to make it harder to match in the future... It's mostly to keep new powerful APs from being associated with other locations, but you'd think we'd need something to counter this if e.g. an AP doesn't show up in the next 10 times I match a location.) I have a feeling that we're missing some things from set theory or graph theory that would assist in grouping/classification of this data, and perhaps providing a better "confidence level" on matches, and better robustness against missed beacons, signal strength changes, and the like. Also it would be useful to have a good method for mutating locations over time. Any useful resources out there for this sort of thing? Simple and/or robust approaches we're missing?

  Read the article

• Install XP Mode with VirtualBox Using the VMLite Plugin

  - by Mysticgeek

  Would you like to run XP Mode, but prefer Sun’s VirtualBox for virtualization?  Thanks to the free VMLite plugin, you can quickly and easily run XP Mode in or alongside VirtualBox. Yesterday we showed you one method to install XP Mode in VirtualBox, unfortunately in that situation you lose XP’s activation, and it isn’t possible to reactivate it. Today we show you a tried and true method for running XP mode in VirtualBox and integrating it seamlessly with Windows 7. Note: You need to have Windows 7 Professional or above to use XP Mode in this manner. Install XP Mode Make sure you’re logged in with Administrator rights for the entire process. The first thing you’ll want to do is install XP Mode on your system (link below). You don’t need to install Windows Virtual PC. Go through and install XP Mode using the defaults. Install VirtualBox Next you’ll need to install VirtualBox 3.1.2 or higher if it isn’t installed already. If you have an older version of VirtualBox installed, make sure to update it. During setup you’re notified that your network connection will be reset. Check the box next to Always trust software from “Sun Microsystems, Inc.” then click Install.   Setup only takes a couple of minutes, and does not require a reboot…which is always nice. Install VMLite XP Mode Plugin The next thing we’ll need to install is the VMLite XP Mode Plugin. Again Installation is simple following the install wizard. During the install like with VirtualBox you’ll be asked to install the device software. After it’s installed go to the Start menu and run VMLite Wizard as Administrator. Select the location of the XP Mode Package which by default should be in C:\Program Files\Windows XP Mode. Accept the EULA…and notice that it’s meant for Windows 7 Professional, Enterprise, and Ultimate editions. Next, name the machine, choose the install folder, and type in a password. Select if you want Automatic Updates turned on or not. Wait while the process completes then click Finish.   The VMLite XP Mode will set up to run the first time. That is all there is to this section. You can run XP Mode from within the VMLite Workstation right away. XP Mode is fully activated already, and the Guest Additions are already installed, so there’s nothing else you need to do!  XP Mode is the whole way ready to use. Integration with VirtualBox Since we installed the VMLite Plugin, when you open VirtualBox you’ll see it listed as one of your machines and you can start it up from here.   Here we see VMLite XP Mode running in Sun VirtualBox. Integrate with Windows 7 To integrate it with Windows 7 click on Machine \ Seamless Mode…   Here you can see the XP menu and Taskbar will be placed on top of Windows 7. From here you can access what you need from XP Mode.   Here we see XP running on Virtual Box in Seamless Mode. We have the old XP WordPad sitting next to the new Windows 7 version of WordPad. This works so seamlessly you forget if your working in XP or Windows 7. In this example we have Windows Home Server Console running in Windows 7, while installing MSE from IE 6 in XP Mode. At the top of the screen you will still have access to the VMs controls.   You can click the button to exit Seamless Mode, or simply hit the right “CTRL+L” Conclusion This is a very slick way to run XP Mode in VirtualBox on any machine that doesn’t have Hardware Virtualization. This method also doesn’t lose the XP Mode activation and is actually extremely easy to set up. If you prefer VMware (like we do), Check out how to run XP Mode on machines without Hardware Virtualization capability, and also how to create an XP Mode for Vista and Windows 7 Home Premium. Links Download XP Mode Download VirtualBox Download VMLite XP Mode Plugin for VirtualBox (Site Registration Required) Similar Articles Productive Geek Tips Search for Install Packages from the Ubuntu Command LineHow To Run XP Mode in VirtualBox on Windows 7 (sort of)Install and Use the VLC Media Player on Ubuntu LinuxInstall Monodevelop on Ubuntu LinuxInstall Flash Plugin Manually in Firefox on Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

  Read the article

• Install XP Mode with VirtualBox Using the VMLite Plugin

  - by Mysticgeek

  Would you like to run XP Mode, but prefer Sun’s VirtualBox for virtualization?  Thanks to the free VMLite plugin, you can quickly and easily run XP Mode in or alongside VirtualBox. Yesterday we showed you one method to install XP Mode in VirtualBox, unfortunately in that situation you lose XP’s activation, and it isn’t possible to reactivate it. Today we show you a tried and true method for running XP mode in VirtualBox and integrating it seamlessly with Windows 7. Note: You need to have Windows 7 Professional or above to use XP Mode in this manner. Install XP Mode Make sure you’re logged in with Administrator rights for the entire process. The first thing you’ll want to do is install XP Mode on your system (link below). You don’t need to install Windows Virtual PC. Go through and install XP Mode using the defaults. Install VirtualBox Next you’ll need to install VirtualBox 3.1.2 or higher if it isn’t installed already. If you have an older version of VirtualBox installed, make sure to update it. During setup you’re notified that your network connection will be reset. Check the box next to Always trust software from “Sun Microsystems, Inc.” then click Install.   Setup only takes a couple of minutes, and does not require a reboot…which is always nice. Install VMLite XP Mode Plugin The next thing we’ll need to install is the VMLite XP Mode Plugin. Again Installation is simple following the install wizard. During the install like with VirtualBox you’ll be asked to install the device software. After it’s installed go to the Start menu and run VMLite Wizard as Administrator. Select the location of the XP Mode Package which by default should be in C:\Program Files\Windows XP Mode. Accept the EULA…and notice that it’s meant for Windows 7 Professional, Enterprise, and Ultimate editions. Next, name the machine, choose the install folder, and type in a password. Select if you want Automatic Updates turned on or not. Wait while the process completes then click Finish.   The VMLite XP Mode will set up to run the first time. That is all there is to this section. You can run XP Mode from within the VMLite Workstation right away. XP Mode is fully activated already, and the Guest Additions are already installed, so there’s nothing else you need to do!  XP Mode is the whole way ready to use. Integration with VirtualBox Since we installed the VMLite Plugin, when you open VirtualBox you’ll see it listed as one of your machines and you can start it up from here.   Here we see VMLite XP Mode running in Sun VirtualBox. Integrate with Windows 7 To integrate it with Windows 7 click on Machine \ Seamless Mode…   Here you can see the XP menu and Taskbar will be placed on top of Windows 7. From here you can access what you need from XP Mode.   Here we see XP running on Virtual Box in Seamless Mode. We have the old XP WordPad sitting next to the new Windows 7 version of WordPad. This works so seamlessly you forget if your working in XP or Windows 7. In this example we have Windows Home Server Console running in Windows 7, while installing MSE from IE 6 in XP Mode. At the top of the screen you will still have access to the VMs controls.   You can click the button to exit Seamless Mode, or simply hit the right “CTRL+L” Conclusion This is a very slick way to run XP Mode in VirtualBox on any machine that doesn’t have Hardware Virtualization. This method also doesn’t lose the XP Mode activation and is actually extremely easy to set up. If you prefer VMware (like we do), Check out how to run XP Mode on machines without Hardware Virtualization capability, and also how to create an XP Mode for Vista and Windows 7 Home Premium. Links Download XP Mode Download VirtualBox Download VMLite XP Mode Plugin for VirtualBox (Site Registration Required) Similar Articles Productive Geek Tips Search for Install Packages from the Ubuntu Command LineHow To Run XP Mode in VirtualBox on Windows 7 (sort of)Install and Use the VLC Media Player on Ubuntu LinuxInstall Monodevelop on Ubuntu LinuxInstall Flash Plugin Manually in Firefox on Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

  Read the article

• AGENT: The World's Smartest Watch

  - by Rob Chartier

  AGENT: The World's Smartest Watch by Secret Labs + House of Horology Disclaimer: Most if not all of this content has been gleaned from the comments on the Kickstarter project page and comments section. Any discrepancies between this post and any documentation on agentwatches.com, kickstarter.com, etc.., those official sites take precedence. Overview The next generation smartwatch with brand-new technology. World-class developer tools, unparalleled battery life, Qi wireless charging. Kickstarter Page, Comments Funding period : May 21, 2013 - Jun 20, 2013 MSRP : $249 Other Urls http://www.agentwatches.com/ https://www.facebook.com/agentwatches http://twitter.com/agentwatches http://pinterest.com/agentwatches/ http://paper.li/robchartier/1371234640 Developer Story The first official launch of the preview SDK and emulator will happen on 20-Jun-2013.  All development will be done in Visual Studio 2012, using the .NET Micro Framework SDK 2.3.  The SDK will ship with the first round of the expected API for developers along with an emulator. With that said, there is no need to wait for the SDK.  You can download the tooling now and get started with Apps and Faces immediately.  The only thing that you will not be able to work with is the API; but for example, watch faces, you can start building the basic face rendering with the Bitmap graphics drawing in the .NET Micro Framework.   Does it look good? Before we dig into any more of the gory details, here are a few photos of the current available prototype models.   The watch on the tiny QI Charter   If you wander too far away from your phone, your watch will let you know with a vibration and a message, all but one button will dismiss the message.   An app showing the premium weather data!   Nice stitching on the straps, leather and silicon will be available, along with a few lengths to choose from (short, regular, long lengths). On to those gory details…. Hardware Specs Processor 120MHz ARM Cortex-M4 processor (ATSAM4SD32) with secondary AVR co-processor Flash & RAM 2MB of onboard flash and 160KB of RAM 1/4 of the onboard flash will be used by the OS The flash is permanent (non-volatile) storage. Bluetooth Bluetooth 4.0 BD/EDR + LE Bluetooth 4.0 is backwards compatible with Bluetooth 2.1, so classic Bluetooth functions (BD/EDR, SPP/AVRCP/PBAP/etc.) will work fine. Sensors 3D Accelerometer (Motion) ST LSM303DLHC Ambient Light Sensor Hardware power metering Vibration Motor (You can pulse it to create vibration patterns, not sure about the vibration strength - driven with PWM) No piezo/speaker or microphone. Other QI Wireless Charging, no NFC, no wall adapter included Custom LED Backlight No GPS in the watch. It uses the GPS in your phone. AGENT watch apps are deployed and debugged wirelessly from your PC via Bluetooth. RoHS, Pb-free Battery Expected to use a CR2430-sized rechargeable battery – replaceable (Mouser, Amazon) Estimated charging time from empty is 2 hours with provided charger 7 Days typical with Bluetooth on, 30 days with Bluetooth off (watch-face only mode) The battery should last at least 2 years, with 100s of charge cycles. Physical dimensions Roughly 38mm top-to-bottom on the front face 35mm left-to-right on the front face and around 12mm in depth 22mm strap Two ~1/16" hex screws to attach the watch pin The top watchcase material candidates are PVD stainless steel, brushed matte ceramic, and high-quality polycarbonate (TBD). The glass lens is mineral glass, Anti-glare glass lens Strap options Leather and silicon straps will be available Expected to have three sizes Display 1.28" Sharp Memory Display The display stays on 100% of the time. Dimensions: 128x128 pixels Buttons Custom "Pusher" buttons, they will not make noise like a mouse click, and are very durable. The top-left button activates the backlight; bottom-left changes apps; three buttons on the right are up/select/down and can be used for custom purposes by apps. Backup reset procedure is currently activated by holding the home/menu button and the top-right user button for about ten seconds Device Support Android 2.3 or newer iPhone 4S or newer Windows Phone 8 or newer Heart Rate monitors - Bluetooth SPP or Bluetooth LE (GATT) is what you'll want the heart monitor to support. Almost limitless Bluetooth device support! Internationalization & Localization Full UTF8 Support from the ground up. AGENT's user interface is in English. Your content (caller ID, music tracks, notifications) will be in your native language. We have a plan to cover most major character sets, with Latin characters pre-loaded on the watch. Simplified Chinese will be available Feature overview Phone lost alert Caller ID Music Control (possible volume control) Wireless Charging Timer Stopwatch Vibrating Alarm (possibly custom vibrations for caller id) A few default watch faces Airplane mode (by demand or low power) Can be turned off completely Customizable 3rd party watch faces, applications which can be loaded over bluetooth. Sample apps that maybe installed Weather Sample Apps not installed Exercise App Other Possible Skype integration over Bluetooth. They will provide an AGENT app for your smartphone (iPhone, Android, Windows Phone). You'll be able to use it to load apps onto the watch.. You will be able to cancel phone calls. With compatible phones you can also answer, end, etc. They are adopting the standard hands-free profile to provide these features and caller ID.

  Read the article

• Ask How-To Geek: Learning the Office Ribbon, Booting to USB with an Old BIOS, and Snapping Windows

  - by Jason Fitzpatrick

  You’ve got questions and we’ve got answers. Today we highlight how to master the new Office interface, USB boot a computer with outdated BIOS, and snap windows to preset locations. Learning the New Office Ribbon Dear How-To Geek, I feel silly asking this (in light of how long the new Office interface has been out) but my company finally got around to upgrading from Windows XP and Office 2000 so the new interface it totally new to me. Can you recommend any resources for quickly learning the Office ribbon and the new changes? I feel completely lost after two decades of the old Office interface. Help! Sincerely, Where the Hell is Everything? Dear Where the Hell, We think most people were with you at some point in the last few years. “Where the hell is…” could possibly be the slogan for the new ribbon interface. You could browse through some of the dry tutorials online or even get a weighty book on the topic but the best way to learn something new is to get hands on. Ribbon Hero turns learning the new Office features and ribbon layout into a game. It’s no vigorous round of Team Fortress mind you, but it’s significantly more fun than reading a training document. Check out how to install and configure Ribbon Hero here. You’ll be teaching your coworkers new tricks in no time. Boot via USB with an Old BIOS Dear How-To Geek, I’m trying to repurpose some old computers by updating them with lightweight Linux distros but the BIOS on most of the machines is ancient and creaky. How ancient? It doesn’t even support booting from a USB device! I have a large flash drive that I’ve turned into a master installation tool for jobs like this but I can’t use it. The computers in question have USB ports; they just aren’t recognized during the boot process. What can I do? USB Bootin’ in Boise Dear USB Bootin’, It’s great you’re working to breathe life into old hardware! You’ve run into one of the limitations of older BIOSes, USB was around but nobody was thinking about booting off of it. Fortunately if you have a computer old enough to have that kind of BIOS it’s likely to also has a floppy drive or a CDROM drive. While you could make a bootable CDROM for your application we understand that you want to keep using the master USB installer you’ve made. In light of that we recommend PLoP Boot Manager. Think of it like a boot manager for your boot manager. Using it you can create a bootable floppy or CDROM that will enable USB booting of your master USB drive. Make a CD and a floppy version and you’ll have everything in your toolkit you need for future computer refurbishing projects. Read up on creating bootable media with PLoP Boot Manager here. Snapping Windows to Preset Coordinates Dear How-To Geek, Once upon a time I had a company laptop that came with a little utility that snapped windows to preset areas of the screen. This was long before the snap-to-side features in Windows 7. You could essentially configure your screen into a grid pattern of your choosing and then windows would neatly snap into those grids. I have no idea what it was called or if was anymore than a gimmick from the computer manufacturer, but I’d really like to have it on my new computer! Bend and Snap in San Francisco, Dear Bend and Snap, If we had to guess, we’d guess your company must have had a set of laptops from Acer as the program you’re describing sounds exactly like Acer GridVista. Fortunately for you the application was extremely popular and Acer released it independently of their hardware. If, by chance, you’ve since upgraded to a multiple monitor setup the app even supports multiple monitors—many of the configurations are handy for arranging IM windows and other auxiliary communication tools. Check out our guide to installing and configuring Acer GridVista here for more information. Have a question you want to put before the How-To Geek staff? Shoot us an email at [email protected] and then keep an eye out for a solution in the Ask How-To Geek column. Latest Features How-To Geek ETC How to Upgrade Windows 7 Easily (And Understand Whether You Should) The How-To Geek Guide to Audio Editing: Basic Noise Removal Install a Wii Game Loader for Easy Backups and Fast Load Times The Best of CES (Consumer Electronics Show) in 2011 The Worst of CES (Consumer Electronics Show) in 2011 HTG Projects: How to Create Your Own Custom Papercraft Toy Download the New Year in Japan Windows 7 Theme from Microsoft Once More Unto the Breach – Facebook Apps Can Now Access Your Address and Phone Number Dial Zero Speeds You Through Annoying Customer Service Menus Complete Dropquest 2011 and Receive Free Dropbox Storage Desktop Computer versus Laptop Wallpaper The Kids Have No Idea What Old Tech Is [Video]

  Read the article

• OBIEE 11.1.1 - OBIEE 11g Full Sample App on VMware Player 4

  - by user809526

  The Full Sample App is designed to run on Virtual Box. Let's describe how to run it on VMware Player 4. Open Virtualization Format Tool http://communities.vmware.com/community/vmtn/server/vsphere/automationtools/ovf VMware Player Documentation https://www.vmware.com/support/pubs/player_pubs.html Full Sample App Deployment Guide sampleapp107-vbimage-deployguide-453583.pdf INSTALL VMplayer 4.0.0 as root LINUX # sh VMware-Player-4.0.0-471780.x86_64.bundle (A new VM is not needed and can be deleted later after that installation is completed. "I will install OS later" - blank hard disk Guest: linux, Red Hat Enterprise Linux 5-64bits => rename to RHEL target: eg /a/root/vmware/ Max disk size: 5 GB (will be deleted) Disk: Single file Dummy RHEL.vmk, RHEL.vmdk is generated. "Delete VM from Disk" in VM Player.) Copy Full Sample App files to target /a/root/vmware/ WARNING: Select a target eg /a/root/vmware/ with lots of free space, 95 GB. Check checksums (md5sum). Please do it! ff85c7eacf7fb8c382e98da875e879e1  Sampleapp_v107_GA-disk1.vmdk 973258cb3c7d64ab03ae853278cf2233  Sampleapp_v107_GA-disk2.vmdk e576be16e36d810479736bfb15d050f5  Sampleapp_v107_GA-disk3.vmdk 3455df77279e53e07d5fee6712f1597d  Sampleapp_v107_GA-disk4.vmdk OVF FILE   Sampleapp_v107_GA.ovf CONVERSION $ cd /a/root/vmware/ LINUX $ /usr/bin/ovftool -tt=ovf --compress=1 -dm=monolithicSparse Sampleapp_v107_GA.ovf .  [dot] Opening OVF source: Sampleapp_v107_GA.ovf Warning: No manifest file Opening OVF target: . Writing OVF package: Sampleapp_v107_GA/Sampleapp_v107_GA.ovf Disk Transfer Completed                   Completed successfully WINDOWS CYGWIN $ /cygdrive/c/VMwarePlayer/OVFTool/ovftool.exe -tt=ovf --compress=1 -dm=monolithicSparse Sampleapp_v107_GA.ovf .  [dot] Opening OVF source: Sampleapp_v107_GA.ovf Warning: No manifest file Opening OVF target: . Writing OVF package: Sampleapp_v107_GA\Sampleapp_v107_GA.ovf Disk Transfer Completed Completed successfully /a/root/vmware$ du -sk 49095328    .   [50 GB already occupied] IMPORT - First start of VM Player 4: /usr/bin/vmplayer "Open a Virtual Machine" Browse to /a/root/vmware/Sampleapp_v107_GA/Sampleapp_v107_GA.ovf [the new generated .ovf] "Import Virtual Machine" dialog Name: Sampleapp_v107_GA Location: /a/root/vmware/Sampleapp_v107_GA/storage [was /home/tdubois/vmware/Sampleapp_v107_GA] "Import" "The import failed because /a/root/vmware/Sampleapp_v107_GA/Sampleapp_v107_GA.ovf did not pass OVF specification conformance or virtual hardware compliance checks. Click Retry to relax OVF specification..." "Retry" ; Long import /a/root/vmware/Sampleapp_v107_GA/storage/Sampleapp_v107_GA.vmx and new .vmdk files are created. /a/root/vmware$ du -sk 95551384    .   [95 GB occupied] Full Sample App GUEST SETUP "Edit VM settings" min 3GB, 2+ processors, network bridged. For OBIEE + Essbase testing use 8 GB RAM hardware. At first time lauch of Full Sample App, leave OEL booting for several minutes undisturbed. Problem with X display server may occur [/usr/bin/Xorg ; man Xorg]. "Failed to start the X server.... Would you like to view the X server output to diagnose the problem?" "No" [tab key] "Would you like to try to configure the X server? Note that you will need the root password for this." "Yes" [oracle] X Display Settings 800x600 saved in /etc/X11/xorg.conf "Trying to restart the X server" Login as root/oracle in guest OEL. In guest OEL, Virtual Machine > Install VMware Tools... Extract archive VMwareTools-8.8.0-471268.tar.gz all files in writable local directory eg /root In Terminal run Perl script # cd /root/vmware-tools-distrib ; ./vmware-install.pl [keep all default answers] Set keyboard layout System > Preferences > Keyboard > Layouts Restart X server eg System > Log Out root... , relogin Modify X resolution System > Preferences > Screen Resolution Full Sample App OEL login: oracle/oracle ; root/oracle [default US keyboard layout] Credentials are described in the 'sampleapp107-vbimage-deployguide-453583.pdf' The large files in /a/root/vmware/ /a/root/vmware/Sampleapp_v107_GA/ may be removed. FAILURE REMARK: Adding the 4 original Sampleapp_v107_GA-disks[1234].vmdk to VM Player does NOT work as described below. "Edit VM settings" "Remove" "Hard Disk" "Edit VM settings" "Add" "Hard Disk" "Next" "Use an existing virtual disk" "Browse" "Finish" "Keep existing format" "Ok" for each 4 disks settings one by one. Start VM Player 4. "You do not have write access to a partition" Allow all Sampleapp_v107 OEL linux launches. OEL stalls silently after 'Checking filesystems'.

  Read the article

• AMD-V is not enable in virtualbox in amd APU

  - by shantanu

  I am running Dual core AMD E450 APU. When i tried to run a 64-bit OS that requires hardware virtualization using virtual-box it showed me an error "AMD-V is not enable". My AMD processor should provide AMD-V support. And i can find no option for AMD-V in BIOS. How can i solve this problem? How could i enable AMD-V for my APU? Thanks in advance lscpu :- Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 2 On-line CPU(s) list: 0,1 Thread(s) per core: 1 Core(s) per socket: 2 Socket(s): 1 NUMA node(s): 1 Vendor ID: AuthenticAMD CPU family: 20 Model: 2 Stepping: 0 CPU MHz: 1650.000 BogoMIPS: 3291.72 Virtualization: AMD-V L1d cache: 32K L1i cache: 32K L2 cache: 512K NUMA node0 CPU(s): 0,1 EDITED:- Error of virtualBOX:- Failed to open a session for the virtual machine XXX. AMD-V is disabled in the BIOS. (VERR_SVM_DISABLED). Result Code: NS_ERROR_FAILURE (0x80004005) Component: Console Interface: IConsole {1968b7d3-e3bf-4ceb-99e0-cb7c913317bb}

  Read the article

• ARM TechCon 2013: Oracle, ARM expand collaboration on servers, Internet of Things

  - by terrencebarr

  Over the years, Oracle has been making big investments in Java for ARM-based devices. This week, Oracle and ARM announced further expanding their collaboration on a number of fronts, from additional hardware platforms, porting layers, and optimized communication protocols, to 64-bit ARMv8 support, and IoT architectures. Henrik Stahl, VP of Product Management in the Java Platform Group at Oracle, just posted an excellent summary: “ARM TechCon 2013: Oracle, ARM expand collaboration on servers, Internet of Things”. Highly recommended reading. Cheers, – TerrenceFiled under: Embedded Tagged: 6LoWPAN, ARM, CoAP, Freescale, Gemalto, iot, Java Embedded, Java ME Embedded, Java SE Embedded, Lego Mindstorms, OpenJDK, Qualcomm, Raspberry Pi, TechCon

  Read the article

• Nokia’s First Windows Phone Video Surfaces On Web–Elop Demos It To Small Gathering

  - by Gopinath

  Stephen Elop, the CEO of troubled mobile giant Nokia shows off their first Windows Phone to a small gathering. The mobile is codenamed as “Sea Ray” and it runs on Microsoft’s newly released Windows Phone version – Mango. While showcasing the phone Elop requested everyone to turn off their cameras but as usual someone ignored it, recorded the keynote and published it to YouTube. The device looks very similar to the recently released Nokia N9 but comes with an extra button on the sides. Every Windows Phone released so far had three hardware buttons on the front (Home, Search and Back), but the Nokia’s phone have three buttons on the side. Check the embedded video of Elop showcasing Nokia’s first Windows Phone This article titled,Nokia’s First Windows Phone Video Surfaces On Web–Elop Demos It To Small Gathering, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

  Read the article

• Wifi Direct P2P-go and P2P-client support in ubuntu

  - by giri

  I am trying to get wifi direct working on a laptop with ubuntu 12.04 When I type the command 'iw list' it doesn't show P2P-client or P2P-go under 'supported interface modes.From http://wireless.kernel.org/en/users/Documentation/iw/replace-iwconfig I found that 'iwconfig' was replaced with 'iw'.Does it mean that my hardware doesn't have support for wifi-direct or is it just the software(drivers) issue? If is it just sofware issue please help me to find the right drivers which support wifi-direct. Here is the info about my ethernet controller from the output of 'lspci' 02:00.0 Ethernet controller: Atheros Communication Inc. AR242x / AR542x Wreless Network Adapter (PCI-Express) (rev 01) 06:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller (rev 13)

  Read the article

• Ask the Readers: What’s Powering Your Media Center?

  - by Jason Fitzpatrick

  Whether your media center is laptop you occasionally plug into your television or a whole-house arrangement of computers with a home server dishing up the movies and music, we want to hear about your media center system and what you have installed on it. With the recent release of XBMC 11.0 Eden, we have media centers on the brain. This week we want to hear all about your home media center solutions. What kind of hardware and software are you using? How do you have things configured? What tweaks have you applied to your media center to improve your experience? Sound off in the comments with your media center knowledge and then check back on Friday for the What You Said roundup! What’s the Difference Between Sleep and Hibernate in Windows? Screenshot Tour: XBMC 11 Eden Rocks Improved iOS Support, AirPlay, and Even a Custom XBMC OS How To Be Your Own Personal Clone Army (With a Little Photoshop)

  Read the article

• Fragment shader seems to floor() imprecisely

  - by Peter K.

  I'm trying to interpolate coordinates in my fragment shader. Unfortunately if close to the upper edge the interpolated value of fVertexInteger seems to be rounded up instead of beeing floored. This happens above approximately fVertexInteger >= x.97. Example: floor(64.7) returns 64.0 -- correct floor(64.98) returns 65.0 -- incorrect The same happens on ceiling close above x.0, where ceil(65.02) returns 65.0 instead of 66.0. Q: Any ideas how to solve this? Note: GL ES 2.0 with GLSL 1.0 highp floats are not supported in fragment shaders on my hardware flat varying hasn't been a solution, because I'm drawing TRIANGLE_STRIP and can't redeclare the provoking vertex (only OpenGL 3.2+) Fragment Shader: varying float fVertexInteger; varying float fVertexFraction; void main() { // Fix vertex integer fixedVertexInteger = floor(fVertexInteger); // Fragment color gl_FragColor = vec4( fixedVertexInteger / 65025.0, fract(fixedVertexInteger / 255.0), fVertexFraction, 1.0 ); }

  Read the article

• New Reference Configuration: Accelerate Deployment of Virtual Infrastructure

  - by monica.kumar

  Today, Oracle announced the availability of Oracle VM blade cluster reference configuration based on Sun servers, storage and Oracle VM software. Assembling and integrating software and hardware systems from different vendors can be a huge barrier to deploying virtualized infrastructures as it is often a complicated, time-consuming, risky and expensive process. Using this tested configuration can help reduce the time to configure and deploy a virtual infrastructure by up to 98% as compared to putting together multi-vendor configurations. Once ready, the infrastructure can be used to easily deploy enterprise applications in a matter of minutes to hours as opposed to days/weeks, by using Oracle VM Templates. Find out more: Press Release Business whitepaper Technical whitepaper

  Read the article

• HTG Explains: What “Everything Is a File” Means on Linux

  - by Chris Hoffman

  One of the defining features of Linux and other UNIX-like operating systems is that “everything is a file.” This is an oversimplification, but understanding what it means will help you understand how Linux works. Many things on Linux appear in your file system, but they aren’t actually files. They’re special files that represent hardware devices, system information, and other things — including a random number generator. These special files may be located in pseudo or virtual file systems such as /dev, which contains special files that represent devices, and /proc, which contains special files that represent system and process information. How to Banish Duplicate Photos with VisiPic How to Make Your Laptop Choose a Wired Connection Instead of Wireless HTG Explains: What Is Two-Factor Authentication and Should I Be Using It?

  Read the article

• Troubleshooting Application Timeouts in SQL Server

  - by Tara Kizer

  I recently received the following email from a blog reader: "We are having an OLTP database instance, using SQL Server 2005 with little to moderate traffic (10-20 requests/min). There are also bulk imports that occur at regular intervals in this DB and the import duration ranges between 10secs to 1 min, depending on the data size. Intermittently (2-3 times in a week), we face an issue, where queries get timed out (default of 30 secs set in application). On analyzing, we found two stored procedures, having queries with multiple table joins inside them of taking a long time (5-10 mins) in getting executed, when ideally the execution duration ranges between 5-10 secs. Execution plan of the same displayed Clustered Index Scan happening instead of Clustered Index Seek. All required Indexes are found to be present and Index fragmentation is also minimal as we Rebuild Indexes regularly alongwith Updating Statistics. With no other alternate options occuring to us, we restarted SQL server and thereafter the performance was back on track. But sometimes it was still giving timeout errors for some hits and so we also restarted IIS and that stopped the problem as of now." Rather than respond directly to the blog reader, I thought it would be more interesting to share my thoughts on this issue in a blog. There are a few things that I can think of that could cause abnormal timeouts: Blocking Bad plan in cache Outdated statistics Hardware bottleneck To determine if blocking is the issue, we can easily run sp_who/sp_who2 or a query directly on sysprocesses (select * from master..sysprocesses where blocking <> 0).  If blocking is present and consistent, then you'll need to determine whether or not to kill the parent blocking process.  Killing a process will cause the transaction to rollback, so you need to proceed with caution.  Killing the parent blocking process is only a temporary solution, so you'll need to do more thorough analysis to figure out why the blocking was present.  You should look into missing indexes and perhaps consider changing the database's isolation level to READ_COMMITTED_SNAPSHOT. The blog reader mentions that the execution plan shows a clustered index scan when a clustered index seek is normal for the stored procedure.  A clustered index scan might have been chosen either because that is what is in cache already or because of out of date statistics.  The blog reader mentions that bulk imports occur at regular intervals, so outdated statistics is definitely something that could cause this issue.  The blog reader may need to update statistics after imports are done if the imports are changing a lot of data (greater than 10%).  If the statistics are good, then the query optimizer might have chosen to scan rather than seek in a previous execution because the scan was determined to be less costly due to the value of an input parameter.  If this parameter value is rare, then its execution plan in cache is what we call a bad plan.  You want the best plan in cache for the most frequent parameter values.  If a bad plan is a recurring problem on your system, then you should consider rewriting the stored procedure.  You might want to break up the code into multiple stored procedures so that each can have a different execution plan in cache. To remove a bad plan from cache, you can recompile the stored procedure.  An alternative method is to run DBCC FREEPROCACHE which drops the procedure cache.  It is better to recompile stored procedures rather than dropping the procedure cache as dropping the procedure cache affects all plans in cache rather than just the ones that were bad, so there will be a temporary performance penalty until the plans are loaded into cache again. To determine if there is a hardware bottleneck occurring such as slow I/O or high CPU utilization, you will need to run Performance Monitor on the database server.  Hopefully you already have a baseline of the server so you know what is normal and what is not.  Be on the lookout for I/O requests taking longer than 12 milliseconds and CPU utilization over 90%.  The servers that I support typically are under 30% CPU utilization, but your baseline could be higher and be within a normal range. If restarting the SQL Server service fixes the problem, then the problem was most likely due to blocking or a bad plan in the procedure cache.  Rather than restarting the SQL Server service, which causes downtime, the blog reader should instead analyze the above mentioned things.  Proceed with caution when restarting the SQL Server service as all transactions that have not completed will be rolled back at startup.  This crash recovery process could take longer than normal if there was a long-running transaction running when the service was stopped.  Until the crash recovery process is completed on the database, it is unavailable to your applications. If restarting IIS fixes the problem, then the problem might not have been inside SQL Server.  Prior to taking this step, you should do analysis of the above mentioned things. If you can think of other reasons why the blog reader is facing this issue a few times a week, I'd love to hear your thoughts via a blog comment.

  Read the article

• Aero Isn’t Gone in Windows 8: 6 Aero Features You Can Still Use

  - by Chris Hoffman

  Many people think Aero is completely gone in Windows 8, but this isn’t true. Microsoft hasn’t helped matters by saying they’ve “moved beyond Aero” in several blog posts. However, hardware acceleration and most Aero features are still present. Aero is more than Glass. What’s actually gone is the Aero branding and the Aero Glass theme with transparent, blurred window borders. The Flip 3D feature, which wasn’t used by many Windows users, has also been removed. How To Delete, Move, or Rename Locked Files in Windows HTG Explains: Why Screen Savers Are No Longer Necessary 6 Ways Windows 8 Is More Secure Than Windows 7

  Read the article

• Restore Your PC from Windows Home Server

  - by Mysticgeek

  If your computer crashes or you get a virus infection that makes it unrecoverable, doing a clean install can be a hassle, let alone getting your data back. If you’re backing up your computers to Windows Home Server, you can completely restore them to the last successful backup. Note: For this process to work you need to verify the PC you want to restore is connected to your network via Ethernet. If you have it connected wirelessly it won’t work. Restore a PC from Windows Home Server On the computer you want to restore, pop in the Windows Home Server Home Computer Restore disc and boot from it. If you don’t have one already made, you can easily make one following these instructions. We have also included the link to the restore disc below. Boot from the CD then select if your machine has 512MB or RAM or more. The disc will initialize… Then choose your language and keyboard settings. Hopefully if everything goes correctly, your network card will be detected and you can continue. However, if it doesn’t like in our example, click on the Show Details button. In the Detect Hardware screen click on the Install Drivers button. Now you will need to have a USB flash drive with the correct drivers on it. It has to be a flash drive or a floppy (if you happen to still have one of those) because you can’t take out the Restore CD. If you want to make sure you have the correct drivers on the USB flash drive, open the Windows Home Server Console on another computer on your network. In the Computers and Backup section right-click on the computer you want to restore and select View Backups. Select the backup you want to restore from and click the Open button in the Restore or view Files section. Now drag the entire contents of the folder named Windows Home Server Drivers for Restore to the USB flash drive. Back to the machine you’re trying to restore, insert the USB flash drive with the correct drivers and click the Scan button. Wait a few moments while the drivers are found then click Ok then Continue.   The Restore Computer Wizard starts up… Enter in your home server password and click Next. Select the computer you want to restore. If it isn’t selected by default you can pull it up from the dropdown list under Another Computer. Make certain you’re selecting the correct machine. Now select the backup you want to restore. In this example we only have one but chances are you’ll have several. If you have several backups to choose from, you might want to check out the details for them. Now you can select the disk from backup and and restore it to the destination volume. You might need to initialize a disk, change a drive letter, or other disk management tasks, if so, then click on Run Disk Manger. For example we want to change the destination drive letter to (C:).   After you’ve made all the changes to the destination disk you can continue with the restore process. If everything looks correct, confirm the restore configuration. If you need to make any changes at this point, you can still go back and make them. Now Windows Home Server will restore your drive. The amount of time it takes will vary depend on the amount of data you have to restore, network connection speed, and hardware. You are notified when the restore successfully completes. Click Finish and the PC will reboot and be restored and should be working correctly. All the updates, programs, and files will be back that were saved to the last successful backup. Anything you might have installed after that backup will be gone. If you have your computers set to backup every night, then hopefully it won’t be a big issue.   Conclusion Backing up the computers on your network to Windows Home Server is a valuable tool in your backup strategy. Sometimes you may only need to restore a couple files and we’ve covered how to restore them from backups on WHS and that works really well. If the unthinkable happens and you need to restore the entire computer, WHS makes that easy too.  Download Windows Home Server Home Computer Restore CD Similar Articles Productive Geek Tips Restore Files from Backups on Windows Home ServerCreate A Windows Home Server Home Computer Restore DiscGMedia Blog: Setting Up a Windows Home ServerShare Ubuntu Home Directories using SambaInstalling Windows Home Server TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Make your Joomla & Drupal Sites Mobile with OSMOBI Integrate Twitter and Delicious and Make Life Easier Design Your Web Pages Using the Golden Ratio Worldwide Growth of the Internet How to Find Your Mac Address Use My TextTools to Edit and Organize Text

  Read the article

< Previous Page | 138 139 140 141 142 143 144 145 146 147 148 149  | Next Page >