Search Results

Search found 30311 results on 1213 pages for 'dont ask ubun'.

Page 142/1213 | < Previous Page | 138 139 140 141 142 143 144 145 146 147 148 149  | Next Page >

  • High load (and high temp) with idle processes

    - by Nanne
    I've got a semi-old laptop (toshiba satellite a110-228), that's appointed 'laptop for the kids' by my sister. I've installed ubuntu netbook (10.10) on it because of the lack-of memory and it seems to work fine, accept from some heat-issues. These where never a problem under windows. It looks like I've got something similar to this problem: Load is generally 1 or higher, sometimes its stuck at 0.80, but its way to high. Top/htop only show a couple of percentage CPU use (which isn't too shocking, as i'm not doing anything). At this point all the software is stock, and i'd like to keep it that way because its supposed to be the easy-to-maintain kids computer. Now I'd like to find out: What could be the cause of the high load? Could it be as this thread implies, some driver, are there other options to check? How could I see what is really keeping the system hot and bothered? How to check what runs, etc etc? I'd like to pinpoint the culprint. further steps to take for debugging? The big bad internet leads me to believe that it might be the graphics drivers. The laptop has an Intel 945M chipset, but that doesn't seem to be one of the problem childs in this manner (I read a lot abotu ATI drivers that need special isntall). I'd not only welcome hints to directly solve this (duh) but also help in starting to debug what is going on. I am really hesitant in installing an older kernel, as I want it to be stock, and easy upgradeable (because I don't live near it, it should run without me ;) ) As an afterthought: to keep the whole thing cooler, can I 'amp up' the fancontrol? Its only going "airplane" mode when the computer is 95 Celcius, which is a tad late for my taste. Top: powertop:

    Read the article

  • LiveCD does not work on my desktop

    - by Boris
    I've installed Oneiric on my laptop without any issue using the LiveCD downloaded here (from the French Ubuntu community server). But on my desktop, weird things happen: During the 1st try booting with the LiveCD on my desktop, my 2 year old child just hit the keyboard, and after several error messages the desktop loaded and I've been able to test Oneiric. But I wanted to redo a boot before installing Oneiric to avoid mistakes. So during the 2nd time I tried to boot with the LiveCD, I couldn't access to the point where I can choose to test or install. Before trying a 3rd time, I've "cleaned the system" from System Parameter System. But after that I'm still not able to access to the point where I can choose to test or install. Now it stops all the time on a black screen. I do not understand why several boot attempts with same CD have several results. So I wonder if the state of my current installation 11.04 can affect re-booting with my CD 11.10 ?

    Read the article

  • Ubuntu 12.04 Install - Black Screen - No Grub - Have run Boot Repair Disk

    - by Pat
    Day 4 of my purgatory. History: Had problems with live CD at first, had to set the "nomodeset" option ... and then it worked fine. Installed Ubuntu "Alongside" Windows XP from live CD (NOT wubi) Upon reboot after installation, I get the BIOS ... and then a black screen. If I hit shift after the BIOS screen I get text that says "loading GRUB ..", but then no GRUB ... just a black screen. What I have tried to do: Total re-installation ... 3 times now. Also tried with wubi, same black screen. Have gone back to the normal (non-wubi) install. After installation, I tried re-booting the live cd ... and trying to change GRUB file using: sudo gedit /etc/default/grub ... to "nomodeset" and "timeout=10" ... but won't let me save my changes because I'm using the live cd "in memory" system and don't have permissions to the disks (I think). I tried logging in ... but it won't let me. I then read many posts on this site. I'm stuck. This morning, I ran the "boot repair disk". Results here: http://paste.ubuntu.com/1132333/ What I think is wrong: Since I can get the live CD to run (perfectly) with the "nomodeset" option, I think all I need to do is get to GRUB to change that ... but I can't get to GRUB. Appreciate any advice. Pat Day 5 ... I downloaded "Super Grub 2 Disk" from: http://www.supergrubdisk.org/super-grub2-disk/ This looks promising. I can boot the disk and it brings me to a GRUB program that allows me to: 1) Boot to Windows ... which works 2) Boot to Ubuntu ... which does NOT work When I choose boot to Ubuntu, I get lines across the screen which is an obvious video card problem. Likely because I need to set the "nomodeset" option. So, I attempted to use super grub2 to edit the grub file ... but it is TOTALLY different than the Ubuntu grub file ... and I don't know where to put the "nomodeset" option. Still stuck ... The bottom line is that: 1) I need to edit /etc/default/grub on sda(1) ... which is my boot drive ... to add the "nomodeset" option 2) To do that I need to get into grub ... but, I can't. Holding down shift just echo's "loading grub .." and then takes me to a black screen 3) I can boot to the live CD by setting nomodeset .... but I cannot access the hard disk as root ... I can't save my changes! Can anyone tell me how to login as root for the filesystem from the live CD ... so I can edit the grub file on the HARD DISK ... and then run update-grub??

    Read the article

  • I can't save my settings in Ubuntu One client in windows7

    - by user209470
    I have Ubuntu 12.04 at home and windows7 at work. I sync Documents between them with Ubuntu One. In W7 I can't set/save the settings. In syncdaemon-exceptions.log there is error: File "ubuntuone\syncdaemon\config.pyc", line 317, in save exceptions.IOError: [Errno 2] No such file or directory: 'C:\\Users\\F\xc3\xb6ldi Ferenc\\AppData\\Local\\ubuntuone\\syncdaemon.conf.new' The directory is exist. The file is not. The W7 language is Hungarian.

    Read the article

  • No HDMI audio in 13.04

    - by King84
    I have just upgraded from 12.10 to 13.04 and now everything works perfectly, except the fact that I have no audio via HDMI. I am using a Samsung tv-monitor connected via HDMI to my video card Asus EAH4670/DI/1GD3 (which has a Radeon HD 4670 gpu on it), installed phisically into my motherboard which is a MSI 770-C45. I am running kernel 3.9, I just have no sound. I tried downloading and installing https://code.launchpad.net/~ubuntu-audio-dev/+archive/alsa-daily/+files/oem-audio-hda-daily-dkms_0.201304261252~raring1_all.deb , but without any good result. Please help, I need my audio back. In the end, this is my lspci command output. ale@beast:~$ lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] nee ATI RX780/RX790 Host Bridge 00:02.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD790 PCI to PCI bridge (external gfx0 port A) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD790 PCI to PCI bridge (PCI express gpp port C) 00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] 00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller 00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller 00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 3c) 00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller 00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge 00:14.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV730 XT [Radeon HD 4670] 01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI RV710/730 HDMI Audio [Radeon HD 4000 series] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller (rev 03) ale@beast:~$

    Read the article

  • Problem with the installation of VirtualBox

    - by Antonis Grigoriadis
    I am trying to install virtualbox and make it work but it doesn't seem I can. In the image you can seem the output. If I run VBoxManage --version I get: WARNING: The character device /dev/vboxdrv does not exist. Please install the virtualbox-dkms package and the appropriate headers, most likely linux-headers-generic. You will not be able to start VMs until this problem is fixed. 4.3.10_Ubuntur93012 But virtualbox-dkms is already installed and at the latest version. So I tried to reinstall it and i got this: Any help will be appreciated. EDIT: The output after reconfigure (@M.Tarun suggestion): EDIT 2: Also installed the sources as @Hmayag instructed, purged virtualbox and installed it again but I got the same problem.

    Read the article

  • Well supported Hardware Raid Controller

    - by ftiaronsem
    Hello alltogether I am currently planning to buy a hardware-raid controller. This became necessary since I am running Linux and Windows in parallel and now need the redundancy for both OS (Im am going to use RAID1 / Mirroring). Therefore I am searching for a hardware raid controller which is well supported by linux / ubuntu (reporting smart values, stats for the harddrives, etc...). This controller should have four sata ports and if possible it should fit in a PCIE-1x Slot. I would greatly appreciate, if you could suggest some devices. Thanks in advance

    Read the article

  • Why won't Opera let me use the Ubuntu font?

    - by Roddie
    This is driving me crazy. I'm using monochrome rendering for fonts and this causes a few problems in my browser so I wanted to make Ubuntu the standard sans-serif font. I changed it in the preferences and it initially works okay but after a while it reverts to the default. If I go into the font section in the menu, it still lists Ubuntu and if I click OK the pages will correct themselves. Does anyone know I can stop this behaviour? I'm using Opera 11 on Ubuntu 10.10

    Read the article

  • Can't reinstall apache2

    - by Oetzi
    I recently was messing around with my apache config and wanted to reinstall so I could start from fresh. I followed some forum posts about resintalling apache2 and this ended up deleting my /etc/apache2 apache2 folder. Now matter how many thing I try I can't seem to do a full wipe of the apache install and then reinstall. sudo apt-get install apache2 or reinstall doesn't do anything. I can't seem to remove from synaptic either. Is there anything I can do to have a fresh apache install on my computer again? UPDATE: I now have files back but I can't start/restart apache. I get the error: ".: 49: Can't open /etc/apache2/envvars". Does anyone have a default set of apache settings or something similar that I could nick? Or is there something else I can do.

    Read the article

  • Installation of Ubuntu 12.04 LTS is Crashing from Live CD

    - by Daniel Evans
    Hardware: Dell Inspiron 1545 Steps are as follows: Insert Ubuntu 12.04 disc Boot computer Output is as follows error: unexpectedly disconnected from boot status daemon Generating locales... en_US.UTF-8... done Generation complete. ***MEMORY-ERROR***: glib-compile-schemas[569]: GSlice: assertion failed: aligned_memory == (gpointer) addr Aborted pwconv: failed to change the mode of /etc/passwd- to 0600 ***MEMORY-ERROR***: [996]: GSlice: assertion failed: aligned_memory == (gpointer) addr ***MEMORY-ERROR***: glib-compile-scehmas[1034]: GSlice: assertion failed: aligned_memory == gpointer) addr Aborted /usr/lib/python2.7/dist-packages/LanguageSelector/LocaleInfo.py:256: UserWarning: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory warnings.warn(msg.args[0].encode('UTF-8')) Using CD-ROM mount point /cdrom ... etc etc... End up at a prompt line ubuntu@ubuntu:~$ The computer's self tests have given the following three errors (so far): Error Code OFOO:O65D Msg DISK-DST Self-test read error SATA Disk S/N=.... Confidence Test Fail Error Code 0F00:1332 Msg: DISK- Block 418047942: Interrupt Request (IRQ) Error Code: 0142 HD0 self test unsuccessful Status 79

    Read the article

  • Resolution stuck after playing OpenGL game

    - by kit.yang
    I used to start the game,Frozen Throne (using wine) with the option of "-opengl".When I entered the game,the resolution will changed,and restored after exit the game. But this time a problem happened.The resolution can't restore although I restart my computer several times. Both the Ubuntu pane and login windows are exceptional. nvidia-settingsalso detect the resolution is "1024 x 768",But it seemed useless using this tool. Screenshot-NVIDIA X Server Settings: the result of xrandr: Screen 0: minimum 320 x 240, current 1024 x 768, maximum 1024 x 768 default connected 1024x768+0+0 0mm x 0mm 1024x768 50.0* 800x600 51.0 52.0 53.0 680x384 54.0 55.0 640x480 56.0 576x432 57.0 512x384 58.0 400x300 59.0 60.0 61.0 320x240 62.0 the configure of /etc/X11/xorg.conf: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 1.0 (buildd@yellow) Fri Apr 9 11:51:21 UTC 2010 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: builtin, VertRefresh source: builtin Identifier "Monitor0" VendorName "Unknown" ModelName "CRT-0" HorizSync 28.0 - 55.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Entry Graphics" EndSection Section "Screen" # Removed Option "metamodes" "1024x768 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "1024x768_60 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

    Read the article

  • Re-order active applications in right navigation bar

    - by gotqn
    I am using Ubuntu 12.04 and I want to know is there a way to re-order the item in my navigation bar. In windows 7 it is possible to group elements and re-order their position. To be more specific. When I new application is started, it is added in my right navigation bar (or bottom menu for windows). Is there a way ti drag the "Chrome" icon for example, and to move it below to Firefox one? Now, if i try to drag a icon, the all icons move.

    Read the article

  • Why is my RAID /dev/md1 showing up as /dev/md126? Is mdadm.conf being ignored?

    - by mmorris
    I created a RAID with: sudo mdadm --create --verbose /dev/md1 --level=mirror --raid-devices=2 /dev/sdb1 /dev/sdc1 sudo mdadm --create --verbose /dev/md2 --level=mirror --raid-devices=2 /dev/sdb2 /dev/sdc2 sudo mdadm --detail --scan returns: ARRAY /dev/md1 metadata=1.2 name=ion:1 UUID=aa1f85b0:a2391657:cfd38029:772c560e ARRAY /dev/md2 metadata=1.2 name=ion:2 UUID=528e5385:e61eaa4c:1db2dba7:44b556fb Which I appended it to /etc/mdadm/mdadm.conf, see below: # mdadm.conf # # Please refer to mdadm.conf(5) for information about this file. # # by default (built-in), scan all partitions (/proc/partitions) and all # containers for MD superblocks. alternatively, specify devices to scan, using # wildcards if desired. #DEVICE partitions containers # auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # instruct the monitoring daemon where to send mail alerts MAILADDR root # definitions of existing MD arrays # This file was auto-generated on Mon, 29 Oct 2012 16:06:12 -0500 # by mkconf $Id$ ARRAY /dev/md1 metadata=1.2 name=ion:1 UUID=aa1f85b0:a2391657:cfd38029:772c560e ARRAY /dev/md2 metadata=1.2 name=ion:2 UUID=528e5385:e61eaa4c:1db2dba7:44b556fb cat /proc/mdstat returns: Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10] md2 : active raid1 sdb2[0] sdc2[1] 208629632 blocks super 1.2 [2/2] [UU] md1 : active raid1 sdb1[0] sdc1[1] 767868736 blocks super 1.2 [2/2] [UU] unused devices: <none> ls -la /dev | grep md returns: brw-rw---- 1 root disk 9, 1 Oct 30 11:06 md1 brw-rw---- 1 root disk 9, 2 Oct 30 11:06 md2 So I think all is good and I reboot. After the reboot, /dev/md1 is now /dev/md126 and /dev/md2 is now /dev/md127????? sudo mdadm --detail --scan returns: ARRAY /dev/md/ion:1 metadata=1.2 name=ion:1 UUID=aa1f85b0:a2391657:cfd38029:772c560e ARRAY /dev/md/ion:2 metadata=1.2 name=ion:2 UUID=528e5385:e61eaa4c:1db2dba7:44b556fb cat /proc/mdstat returns: Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10] md126 : active raid1 sdc2[1] sdb2[0] 208629632 blocks super 1.2 [2/2] [UU] md127 : active (auto-read-only) raid1 sdb1[0] sdc1[1] 767868736 blocks super 1.2 [2/2] [UU] unused devices: <none> ls -la /dev | grep md returns: drwxr-xr-x 2 root root 80 Oct 30 11:18 md brw-rw---- 1 root disk 9, 126 Oct 30 11:18 md126 brw-rw---- 1 root disk 9, 127 Oct 30 11:18 md127 All is not lost, I: sudo mdadm --stop /dev/md126 sudo mdadm --stop /dev/md127 sudo mdadm --assemble --verbose /dev/md1 /dev/sdb1 /dev/sdc1 sudo mdadm --assemble --verbose /dev/md2 /dev/sdb2 /dev/sdc2 and verify everything: sudo mdadm --detail --scan returns: ARRAY /dev/md1 metadata=1.2 name=ion:1 UUID=aa1f85b0:a2391657:cfd38029:772c560e ARRAY /dev/md2 metadata=1.2 name=ion:2 UUID=528e5385:e61eaa4c:1db2dba7:44b556fb cat /proc/mdstat returns: Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10] md2 : active raid1 sdb2[0] sdc2[1] 208629632 blocks super 1.2 [2/2] [UU] md1 : active raid1 sdb1[0] sdc1[1] 767868736 blocks super 1.2 [2/2] [UU] unused devices: <none> ls -la /dev | grep md returns: brw-rw---- 1 root disk 9, 1 Oct 30 11:26 md1 brw-rw---- 1 root disk 9, 2 Oct 30 11:26 md2 So once again, I think all is good and I reboot. Again, after the reboot, /dev/md1 is /dev/md126 and /dev/md2 is /dev/md127????? sudo mdadm --detail --scan returns: ARRAY /dev/md/ion:1 metadata=1.2 name=ion:1 UUID=aa1f85b0:a2391657:cfd38029:772c560e ARRAY /dev/md/ion:2 metadata=1.2 name=ion:2 UUID=528e5385:e61eaa4c:1db2dba7:44b556fb cat /proc/mdstat returns: Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10] md126 : active raid1 sdc2[1] sdb2[0] 208629632 blocks super 1.2 [2/2] [UU] md127 : active (auto-read-only) raid1 sdb1[0] sdc1[1] 767868736 blocks super 1.2 [2/2] [UU] unused devices: <none> ls -la /dev | grep md returns: drwxr-xr-x 2 root root 80 Oct 30 11:42 md brw-rw---- 1 root disk 9, 126 Oct 30 11:42 md126 brw-rw---- 1 root disk 9, 127 Oct 30 11:42 md127 What am I missing here?

    Read the article

  • Bug in firefox address bar autocomplete running on KDE

    - by marcus
    Has anyone experienced this graphical glitch when typing in Firefox address bar? The drop-down list is not drawn correctly, with some "blocks" missing. After typing more letters or hovering the mouse cursor, the list redraws itself and becomes complete. I'm running Ubuntu 12.04, Firefox 13.0.1 and this only happens in KDE (tested with 4.8.2, 4.8.3 and 4.8.4). It does not happen in Unity or Xfce with the same user profile. If I go to the KDE control panel and disable the Fade effect, the bug starts to happen to almost every menu in the system, including, the taskbar window previews. Enabling the “Fade” effect corrects the bug everywhere except in Firefox. I have an Nvidia card and I am using the proprietary driver (current, not current-updates -- not sure about the difference), but the linked question on an Arch Linux forum says this happen with the open source driver and with other cards too. Does anyone have an idea for a solution?

    Read the article

  • Can't Log in to Lubuntu 12.04 X Server

    - by isomorphismes
    As of rebooting yesterday I can't login as myself to the X server part of 64-bit Lubuntu 12.04. Same problem as Can not get passed the login screen but that solution didn't work for me. Troubleshooting steps I already took: I can log in as guest (with whatever window manager) to the graphic (X) view of Lubuntu. log in as myself into a virtual terminal. (In fact I'm writing this from w3m for that reason.) So I know my password is correct and that most aspects of the system are working. One of the top google results for "can't log into lubuntu" mentioned a disk-full problem on netbooks; I don't have that problem. Let me know if I need to paste any messages or config files to make this question clearer and I'll do so. $ ls -l /home total 12 drwxr-xr-x 99 me me 12288 May 26 14:16 me $ ls -ld /tmp drwxrwxrwt 16 root root 4096 May 26 15:46 /tmp

    Read the article

  • Network connection delay after installing indicator-network

    - by Adrian
    Ok, so here's the thing,I installed wingpanel in UBUNTU 10.10, i removed the gnome-panels (yes, both). In the wingpanel itself there's no NETWORK indicator, so i google it and in some forums, some guy wrote that you have to install "indicator-network". I did it, and it solved the network indicator in the wingpanel, BUT now everytime i turn on my computer, the connection takes like 2 minutes or more to connect, when before installing this thing it did it immediately. How can i solve this? any help?

    Read the article

  • KDE not loading without nomode tag in grub and bad resolution [migrated]

    - by fcole90
    I recently installed Linux Mint 13 KDE but it's not working fine. At first I had to use failsafe mode to boot because normal boot takes to a textual login. If I use normal boot and text login I'm not able to run KDE nor with kdm start neither with startx. kdm says that's already running. Instead X is not able to run because can't connect Xserver to display. If I stop kdm and starx again doesn't change anything. Now I edited the grub to load in nomode. In that way KDE loads but resolution is wrong and xrandr doesn't help, because if I do this: cvt 1366 768 it changes it to 1368: # 1368x768 59.88 Hz (CVT) hsync: 47.79 kHz; pclk: 85.25 MHz Modeline "1368x768_60.00" 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync I also installed bumblebee and nvidia drivers because of optimus technology.. It worked just to have fun with glxspheres but there isn't any gain on KDE.. This is lspci output: fabio@fabio-EasyNote-TS11HR ~ $ lspci |grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 540M] (rev ff My notebook is an EasyNote TS with NVIDIA GeForce GT 540M. Thank you in advance to anyone that may help!

    Read the article

  • No wireless and display issues on Dell Inspiron 1210 (Mini 12)

    - by Bryan M.
    I recently upgraded a friend's Dell Mini 12 (Inspiron 1210) from Ubuntu 8.10 to 10.04 netbook edition. After installing, and performing the available updates, I'm unable to detect any wireless networks (it knows it has a wireless card, but won't list any active networks). There also seems to be an issue with the display drivers: when scrolling, resizing, or drawing any windows there is a noticeable lag as I watch the screen redraw. As if there are no compatible display drivers installed. All these problems go away the moment I boot up a version of 8.10. But I'd like to keep 10.04 if possible. Are these common problems? Everything I've read suggest this is laptop should be compatible. Any suggestions? Thanks.

    Read the article

  • Activity log manager is not preventing Zeitgeist from logging files

    - by Vivek
    I am running Gnome Shell and I do not like Zeitgeist indexing all my files. This makes the search in dash very slow. I do not want the dash to search recent files, so I installed activity log manager to prevent zeitgeist's logging activity. I configured the log manager as below. But even after adding every folder, the files keep appearing in the dash under Recent Items. Is there any other software or tweak which will instruct zeitgeist to search only applications installed in my system and not my recent files.

    Read the article

  • debootstrap or virt-install Ubuntu Server Maverick fails

    - by poelinca
    Oki so running any kind of variation of debootsrap i get the following error I: Extracting zlib1g... W: Failure trying to run: chroot /lxc/iso/dodo mount -t proc proc /proc debootstrap.log : mount: permission denied if i manualy chroot into the directory then i get promted with: id: cannot find name for group ID 0 I have no name!@...# i tryed addgroup but it's not installed , apt-get/aptitude : command not found , so i can't do anything with it . I've tryed ubuntu-vm-builder but since it's calling debootstrap i get the same error . Played with it for a few days and then i stoped and gaved virt-install a try , everithing works till i get to the console to finish the install witch shows only : Escape character is ^] and nothing more , no matter what i type . So basicly what i'm trying to do is build a usable chroot system so i can use it with lxc or libvirt . What are my options to get containers/virtualisation up and running ? I've read somewhere that i can use openvz templates with lxc or libvirt ? but how ? Let me know if you need aditional info ( p.s. doing all this on a dedicated server so i can't access it by hand , only ssh , plus on my local pc running ubuntu desktop maverick everithing works ) . EDIT Getting closer , i managed to understand how to use an openvz template with lxc , now the problem comes with the network bridge lxc-start: invalid interface name: br0 # Use same bridge device used in your controlling host setup lxc-start: failed to process 'lxc.network.link = br0 # Use same bridge device used in your controlling host setup ' lxc-start: failed to read configuration file i followed the exact steps to create a bridge and lxc conf looks like: lxc.network.type = veth lxc.network.flags = up lxc.network.link = br0 # Use same bridge device used in your controlling host setup lxc.network.hwaddr = {a1:b2:c3:d4:e5:f6} # As appropiate (line only needed if you wish to dhcp later) lxc.network.ipv4 = {10.0.0.100} # (Use 0.0.0.0 if you wish to dhcp later) lxc.network.name = eth0 # could likely be whatever you want Since it's not working i know smth is wrong so could somebody guyde me ? EDIT , looks like the base install was using an custom kernel ( bzImage-2.6.34.6-xxxx-grs-ipv6-65 ) for witch you i didn't found the headers , i did a update-grub after i installed a new kernel , edited menu.lst and no it's using 2.6.35-23-server and now debootstrap is working just fine same as ubuntu-vm-builder .

    Read the article

  • Apple Aluminum Keyboard Via Bluetooth - Fn Key Problem

    - by Richard
    I'm connecting an Apple Bluetooth Aluminum keyboard (this one) to my Lubuntu setup using the blueman applet. The keyboard types fine, but I would like to use its fn key to change screen brightness changing, page-up (fn+ctrl+down), page-down (fn+ctrl+up), et cetera. Right now the fn key doesn't seem to work. When I use xev, I don't see anything happen when I press fn. Does the keyboard not send this to the computer at all? Do I need to configure blueman's "Input Service" setting to make this an Apple (rather than a generic) keyboard? (It's not obvious how to do this.) Is xev just not showing the fn key? Where in this stack of software do I need to make a change to achieve the desired behaviour? Thanks!

    Read the article

  • Adding IP address to OpenVZ VPS (OpenVZ Web Panel)

    - by andy
    I apologise if I sound at all dumb. This is my first dedicated server having used a VPS for over a year and I'm trying to setup a VPS on this new server. I purchased a subnet from my hosting provider that I believe allows me 6 usable IP addresses: 177.xx.xxx.201 - 177.xx.xxx.206 The subnet address looks like this: 177.xx.xxx.200/29. I've gone on my server and added them like it said on a wiki like so: ip addr add 177.**.***.201/29 dev eth0 I done that for all six and now when I go to them in the browser they point to my server. The problem is, I'm using OpenVZ web panel to create VMs (http://code.google.com/p/ovz-web-panel/) so I created a VM and assigned one of those IPs to it. However when SSHing to that IP it SSH's to the dedicated server and not the VM. Am I missing something?

    Read the article

  • Error on restarting networking :SIOCSIFFLAGS

    - by Paddington
    I have a sever with 2 network cards, an internal IP on one card (eth0) and external IPs (aliased) on the other card (eth1). I lost connection the public network and I tried to restart networking with /etc/init.d/networking restart and got the error "SIOCSIFFLAGS: cannot assing requested IP and Failed to bring up eth1". I even added the IPs in the interfaces file but still got an error on restarting. I could not ping my default gateway. A work around was to add ifconfig eth 0 x.x.x.x route -add default gw x.x.x.z I could then connect to the public network. What could be the issue here?

    Read the article

  • Configuring Multi-Tap on Synpaptics Touchpad

    - by nunos
    I am having a hard time configuring my notebook's touchpad. The touchpad already works. It succesfully responds to one-finger tap, two-finger tap and two-finger vertical scrolling. What I want to accomplish: change two-finger tap action from right-mouse click to middle-mouse click add three-finger tap functionality to yield right-mouse click action I read on a forum to use this as a guide. I have succesfully accomplished point 1 with synclient TapButton2=2. However, I have to do it everytime I log in. I have tried to put that command on /etc/rc.local but the computer always boots and logins with the default configuration. Regarding point 2, I have tried synclient TapButton3=3 but it doesn't do anything when I three-finger tap the touchpad. I am running Ubuntu 11.10 on an Asus N82JV. /etc/X11/xorg.conf: nuno@mozart:~$ cat /etc/X11/xorg.conf Section "InputClass" Identifier "touchpad catchall" Driver "synaptics" MatchIsTouchpad "on" MatchDevicePath "/dev/input/event*" Option "TapButton1" "1" Option "TapButton2" "2" Option "TapButton3" "3" EndSection /usr/share/X11/xorg.conf.d/50-synaptics.conf: nuno@mozart:~$ cat /usr/share/X11/xorg.conf.d/50-synaptics.conf # Example xorg.conf.d snippet that assigns the touchpad driver # to all touchpads. See xorg.conf.d(5) for more information on # InputClass. # DO NOT EDIT THIS FILE, your distribution will likely overwrite # it when updating. Copy (and rename) this file into # /etc/X11/xorg.conf.d first. # Additional options may be added in the form of # Option "OptionName" "value" # Section "InputClass" Identifier "touchpad catchall" Driver "synaptics" MatchIsTouchpad "on" MatchDevicePath "/dev/input/event*" Option "TapButton1" "1" Option "TapButton2" "2" Option "TapButton3" "3" EndSection xinput list: nuno@mozart:~$ xinput list ? Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? Microsoft Microsoft® Nano Transceiver v2.0 id=12 [slave pointer (2)] ? ? Microsoft Microsoft® Nano Transceiver v2.0 id=13 [slave pointer (2)] ? ? ETPS/2 Elantech Touchpad id=16 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Video Bus id=7 [slave keyboard (3)] ? Video Bus id=8 [slave keyboard (3)] ? Sleep Button id=9 [slave keyboard (3)] ? USB2.0 2.0M UVC WebCam id=10 [slave keyboard (3)] ? Microsoft Microsoft® Nano Transceiver v2.0 id=11 [slave keyboard (3)] ? Asus Laptop extra buttons id=14 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=15 [slave keyboard (3)]

    Read the article

  • How should I configure TRIM Support for LVM logical volumes?

    - by Zack Perry
    I am setting up a notebook for software demo purpose. The machine has a Intel Core i7 CPU, 8GB RAM, a 128GB SSD, and runs Ubuntu 12.04 LTS 64bit desktop. As it is, the SSD is configured to have a single volume group, with /boot, /swap, and / all in their respective logical volumes. They collectively consume 30GB space. I plan to use the remaining for logical volumes for KVM guests, all run Ubuntu 12.04 Server I would like to ensure that the SSD is utilized optimally. Although on this site, there are some great info about setting up TRIM support for file system setups that do not involve LVM, I have not found explicit guide regarding my planned setup. I did found this page which talks about adding issue_discards in /etc/lvm/lvm.conf. But in said file on my machine, I didn't find the cited content. I double-checked man lvm.conf(5), didn't see any mentioning of this option either. Thus, I'm not sure what to do. Furthermore, even say adding the option is the right thing to do, should I in my machine's /etc/fstab still add mount options such as noatime etc? Any tips, pointers, and/or further guidance are greatly appreciated.

    Read the article

< Previous Page | 138 139 140 141 142 143 144 145 146 147 148 149  | Next Page >