Search Results

Search found 4376 results on 176 pages for 'drivers'.

Page 142/176 | < Previous Page | 138 139 140 141 142 143 144 145 146 147 148 149  | Next Page >

• Touchpad won't work/not recognized on laptop, Ubuntu 11.10

  - by The_McManus_Position

  When I start out running 11.10 (Ocelot) from the Live CD the touchpad works with no problem. Once installing however the touchpad does not work at all. I have installed all updates available. I have tried installing the synaptiks touchpad package and the gpointer package from the software manager, this did not help. Under System Settings - Mouse and Touchpad there is only a mouse tab, no touchpad tab. It seems my touchpad is not even recognized. I have tried running several things in the terminal that I have found under similar questions, but I always get errors about the files not being found, or the drivers not being found. Have tried: sudo modprobe -r psmouse sudo modprobe psmouse proto=imps This results in an error message. dconf-editor Can load the GUI, but after that I can't seem to navigate through it to find the files that need editing. Read what's listed here. But I've got no GRUB, running only Ubuntu. As you can see I've been trying several things and nothing has worked so far, would appreciate any help. Thanks!

  Read the article

• Review: Logitech t620 Touch Mouse and Windows 8

  - by Tim Murphy

  It isn’t very often that I worry much about hardware, but since I heard some others talking about “touch” mice for their Windows 8 machines I figured I would try one out and see what the experience was.  The only Windows 8 compatible touch mouse that they had in the store was the Logitech t630 Touch Mouse.  At $69 it isn’t exactly a cheap purchase. So how does it work with Windows 8.  First it works well as a normal mouse with touch scroll capabilities.  Scrolling works both horizontally and vertically.  Then you get into to the Win8 features, all of which are associated with the back 2/3 of the mouse.  If you double-touch-tap (not depressing the internal button) it acts as a Windows home screen button.  The next feature is switching applications.  This is accomplished by dragging a finger from the left edge of the mouse in.  Bringing up the Windows 8 open apps list is the same movement as on the table where you drag in from the left and then move back to the right.  The last gesture available is to bring up the charms.  This is performed by dragging in from the right side of the mouse. There is a certain amount of configurability.  You can switch dominant hand configuration as well as turn on and off gestures as shown in the screenshot below. It is nice that they kept the gestures similar to the table gestures.  Hopefully future updates to the drivers will bring other gestures, but this is definitely a good start.  It would be interesting to also compare this to the Microsoft Touch Mouse and see if there are additional gestures such as app close and for the app bar. del.icio.us Tags: Logitech,Windows 8,Win8,t620,Logitech t620 Touch Mouse,Gesture

  Read the article

• X crashes and GNOME loses all its configuration

  - by Oli

  About every 3 days on my desktop (always on), X crashes, gdm restarts and it dumps me at a login screen. When I log in Gnome appears to have lost a lot of its settings: it plays sounds in weird places, UI elements look like they're from the 90s (GTK+ defaults) and it's generally pretty hideous. Note everything works fine. It's not like my profile doesn't exist because I can browse the internet fine (Firefox knows my bookmarks, history, passwords, etc) and my desktop is unscathed (apart from the icon theme). Manually restarting gdm doesn't fix this. I have to do a full reboot. Now I'm almost certain that this is a nvidia issue causing X to baulk (I've seen similarish threads on nvnews) and I'm happy with that (my fault for running their latest drivers all the time). What I'm concerned about is why Gnome looks so fugly. Is there anything I can do to force it to reload its settings without restarting the whole computer. Restarting is an issue for me as I run several daemons that other computers on the network depend upon. This is what I mean by ugly/fugly... Look at that scroll bar!

  Read the article

• Ubuntu 12.04 wireless disabled even though the direct connectin (thru modem) is working fine

  - by user90841

  Need help with my newly installed Ubuntu 12.04 system (dual booting along with Win 7), even thoguh I can use internet using the modem and directly plugging it, the wireless network is disabled and it says firmware missing. I tried the following options: 1) checking to see if the wireless is disabled using the hot keys (F2 or Ctrl+F2, Fn + F2 keys), the wireless is working fine in Win 7 but not in Ubuntu. 2) I am able directly plug the laptop with the modem and able connect to Internet using Ubuntu. 3) From the top right hand menu bar, te Wireless networks options say "device not ready (firmware missing) and the Enable Wireless checkbox is checked. 4) tried the command "rfkill list" , it shows all are NOT blocked. 0: phy0: Wireless LAN soft blocked:no Hard blocked: no 1: dell-wifi: Wireless LAN soft blocked:no Hard blocked: no 2: dell-bluetooth: BlueTooth soft blocked:no Hard blocked: no 3: hci0 Bluetooth soft blocked:no Hard blocked: no 5) ifconfig command shows eth0 and lo (lcoalhost) up and running but the wlan0 option is not available to show unless I type ifconfig -a, when it shows wlan0 but its down. 6) The command lspci -vvnn | grep 14e4 shows 04:00.0 network Controller [0280]: Broadcom Corp BCM4312 802.11b/g LP-PHY [14e4:4315] {rev 01) 08:00.0 Ethernet Controller [0200]: Broadcom Corp Netlink BCM5784M Gigabit Ethernet PCIe [1434:1698] {rev 10) 7) The file /var/lib/NetworkManager/NetworkManager.state shows all options are true (networking enabled, wireless enabled, wwlanenabled and wimaxenabled all options are set to true). 8) 'additional drivers' in your Dash and/or Preferences do not bring up anything at all. 9) output for lshw -C network shows *-network DISABLED description : Wireless interface physical id: 4 logical name: wlan0 serial: 78:e4_00"43:b6:ab capabilities: ethernet physical wireless Configuration: broadcast=yes driver=b43 driverversion=3.2.0.29-generic-pae firmware=N/A link=no multicast= yes wireless=IEEE 802.11bg

  Read the article

• Enabling GTX 570

  - by Silas

  Hello i just built up my new system: Asus Rock Z77 Extreme 4 Intel i7 3770k 16 Gb Corsair Ram Zotac Nvidia GTX 570 bequiet! 630W Power supply 120 GB SSD So after i installed UBUNTU 12.04 64 bit. It ran smoothly. I downloaded and installed all the recommended updates. After checking the Sytem details the GTX 570 didnt show up as graphics unit. so i figured i needed to download the drivers. So i did but being a complete newbie to linux i didnt succeed in installing them. (I think) Anyway after several tries and errors i shut down the PC and restarted it. Resultung in do Signal to my screen after trying to reboot and all the monitor outs with no result i took out the graphic card and now it boots normally but after booting it says there is a problem with the system the graphics cant be recognized something something. So Question A: What do i do? I Like linux but the arbitrarity of the Errors that occur without any changes to the system scare me. Question B: Is there A beginners guide to Ubuntu where i could start from scratch because i really want this to work? Question C: Now that the System is (suddently) showing these graphic errors So far without visible consequence despite the error message. should i reinstall the GPU and give the driver installation another try or the other way around? Ill be very grateful for any help. Thank you in advance!

  Read the article

• USB Keyboard works occasionally

  - by palimmo

  A few days ago I bought a SL640 Hama USB keyboard to use on my laptop with Ubuntu 12.04. But I'm having problems, as it works one time out of 10! While on my girlfriend's laptop, with Win Vista, always works. And on my laptop I have Win7 in dual boot. And I have to say that it always works on it. Here are some infos: ~$ lsusb Bus 006 Device 003: ID 04d9:1503 Holtek Semiconductor, Inc. Shortboard Lefty As you can see, the OS recognized it but the keyboard doesn't react ... even the Caps Lock and Num Lock keys don't blink. Regarding the legacy support (useful for GRUB), I have found no entry in the BIOS. But I'm not interested in it. I just want to use it in Ubuntu. However, in GRUB it works sometimes. Surprisingly, now I have booted my laptop: the usb keyboard hasn't worked in GRUB but it has worked since the ubuntu login! And now I'm typing with it. Well.. it means that Ubuntu has the right drivers and they work. But how to "load" them always correctly? thanks in advance!

  Read the article

• How to make the internal subwoofer work on an Asus G73JW?

  - by CodyLoco

  I have an Asus G73JW laptop which has an internal subwoofer built-in. Currently, the system detects the internal speakers as a 2.0 system (or I can change do 4.0 is the only other option). I found a bug report here: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/673051 which discusses the bug and according to them a fix was sent upstream back at the end of 2010. I would have thought this would have made it into 12.04 but I guess not? I tried following the link given at the very bottom to install the latest ALSA drivers, here: https://wiki.ubuntu.com/Audio/InstallingLinuxAlsaDriverModules however I keep running into an error when trying to install: sudo apt-get install linux-alsa-driver-modules-$(uname -r) Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package linux-alsa-driver-modules-3.2.0-24-generic E: Couldn't find any package by regex 'linux-alsa-driver-modules-3.2.0-24-generic' I believe I have added the repository correctly: sudo add-apt-repository ppa:ubuntu-audio-dev/ppa [sudo] password for codyloco: You are about to add the following PPA to your system: This PPA will be used to provide testing versions of packages for supported Ubuntu releases. More info: https://launchpad.net/~ubuntu-audio-dev/+archive/ppa Press [ENTER] to continue or ctrl-c to cancel adding it Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /tmp/tmp.7apgZoNrqK --trustdb-name /etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --primary-keyring /etc/apt/trusted.gpg --keyserver hkp://keyserver.ubuntu.com:80/ --recv 4E9F485BF943EF0EABA10B5BD225991A72B194E5 gpg: requesting key 72B194E5 from hkp server keyserver.ubuntu.com gpg: key 72B194E5: public key "Launchpad Ubuntu Audio Dev team PPA" imported gpg: Total number processed: 1 gpg: imported: 1 (RSA: 1) And I also ran an update as well (followed the instructions on the fix above). Any ideas?

  Read the article

• How to fix Sketchup in Wine when tool starts, but displays empty workspace?

  - by Chaos_99

  I've installed wine 1.6 and winetricks in an Linux Mint 15 system, then downloaded the latest Sketchup2013 'Make' Windows-Installer and installed through wine. I've prepared the wine environment with starting as WINEARCH=win32, installed corefonts and ie8 and enabled the override for the 'riched20' libraries. (I've no idea what the last bit does, but it was advised in some guides.) I've also tried without these steps. Only the win32 seems to make a difference, as the installer will complain about not finding SP2 otherwise. Sketchup is installed successfully and starts, but displays an empty viewport. The program is responsive and everything works, it's just that you can't see anything. I don't get any OpenGL error and the registry entries seem fine, according to the OpenGL issue workarounds floating around the net. I still think it has something to do with OpenGL not working properly, maybe not in the wine environment, but in the linux system? I'm running on a Lenovo W520 with Nvida/Intel hybrid cards, but only the NVida card is active and the properitary nvidia (319) drivers are installed. GLXGears runs fine, but clamps at 2x the refresh rate. glxinfo outputs direct rendering: Yes server glx vendor string: NVIDIA Corporation server glx version string: 1.4 I'm willing to try any linux or wine OpenGL tests to narrow down the problem, if you can offer any advise on what to use.

  Read the article

• Can't install Ubuntu 12.04 64-bit on a dual-drive MacBook Pro 8,2

  - by kizdp

  Good afternoon, this is the first time I participate here as I'm new to Linux. I've been trying to solve the following problem for over a week without any sign of success so I hope there's a much more knowledgeable person here that can give me a solution. I have an early 2011 MacBook Pro (8,2) with Mac OS X running in a SSD. Then, instead of the Optical bay, I have a HDD in where I would like to install Ubuntu to run it natively. I've tried to do the normal installation process, with or without rEFIt, but it seems the problem resides on the communication between the device containing the Ubuntu .iso file and the laptop. It doesn't allow communication with the boot CD or USB drive. It usually says: “Loading bootlogo...” after I click on the “boot from CD, Linux Icon”. After trying several things, I would like to know if I could install Ubuntu on the HDD as an external HDD (using a friend's Window's system) and then simply put it back into my laptop so as to become an Internal HDD again. I guess, I would have to reinstall many drivers and so on, but would this approach work? Thanks in advance and sorry for this huge block of text

  Read the article

• How to Activate wifi in Toshiba Satellite C655?

  - by user4106

  I've recently bought a Toshiba Satellite C655. It came with Windows 7 preinstalled. I've never had a notebook before, but as a desktop user, I was a Ubuntu user since 2 years, and I've never had a problem with drivers, wifi, etc. When I tried to install the Ubuntu 10.04, and also the new and fresh 10.10, in my new laptop, I experienced some troubles with some of the componentes of my computer. For example, I was not able to activate my wi-fi card, although I know the kernel recognizes it correctly, because when doing "lspci" at the terminal, it was listed. Anyhow, I'm not able to "activate" the wifi, or whatever it's necessary to do in order to be able to search for public networks available, and to connect with them. The wifi-card the laptops brings is the (the lspci output): 03:00.0 Network Controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01). It's anything in you can help me? Thanks a lot in advance! Edit Neither solution seems to work. In first place, i've tried installig what hhlp told me. After the installation, nothing seems to change: on right-clicking the wireless icon, it seems to recognize the card, because the option "Enable wifi" was ticked. But, once again, i was not able to "turn the wi-fi" on. In second place, i didn't try installing the drives, because the card is already recongnized. The issue is that i cannot seem to turn it on! One thing i've probably missed is that the Toshiba cames with a windows sofntware that allows you to enable / disable the wifi tools. So, it does not have an external "button" to turn it off. I don't know if that's the problem, but i have the feeling that the issue may be aroud there: in how to turn ON the wifi-signal (or to verify if it's on or off) in my ubuntu.

  Read the article

• Why is text on my TV monitor all grainy?

  - by searchfgold6789

  I have successfully installed the Catalyst drivers and hooked up my 1080p TV to the Radeon HD 5750's HDMI port and now it is working. There only seems to be one issue - most images appear OK, at least to my eyes, but text is grainy and difficult to read (not sure how well it can be seen in the picture): It works fine with a smaller screen, and hopefully you can see it with the new pictures which are only slightly better, but images are rendered a little funny too. Changing antialiasing does nothing and changing the refresh rate only makes a slight change if any. The small monitor I have works fine. Smaller resolutions such as 1024x768 look OK but are the wrong aspect ratio. I have tried renaming the input mode on the TV to "PC", and that helped... a little bit. Also, I tried a different PC with the same result. Messing around extensively with the ATI Catalyst Control Center also did not help. I am wondering if there is anything else I can try to increase the quality so it is more usable.

  Read the article

• Dell Inspiron7520 and ubntu 12.04 issues

  - by user91358

  I have a DELL Inspiron 7520 in the highest configuration: 3rd Generation Intel® Core™ i7-3612QM processor (6M Cache, up to 3.1 GHz) 15.6" Full High Definition (1080p) LED Display 8GB3 Dual Channel DDR3 SDRAM at 1600MHz 1TB 5400RPM SATA HDD + 32GB mSATA SSD w/Intel Smart Response Blu-ray Disc (BD) Combo (Reads BD and Writes to DVD/CD) AMD Radeon™ HD 7730M 2GB 6.09 lbs and I have installed Ubuntu 12.04 few days ago and I'm facing some issues: 1) sometimes the whole ntb freezes and I have to hold power button for 5 secs to shut it down. I think it is something with VGA and connected external monitor. I have read somewhere that it is already a reported bug, but what I am not sure about that it is doing sporadically. Sometimes it freezes right after I log in, sometime I ran few hours and then it freezes. I am using those proprietary drivers but I wasn't been able to install those with updates. 2) the next issue is the fan is quite noisy even when the ntb is almost Idle. (max 10% CPU usage). Can you recommend me some software which could do this power management to lower the noise? I have tried CPU frequency scaling indicator, but it seems that it has not any effects. 3) and issue no. 3: when I want to log out, restart or shutdown using the menu in upper right corner the upper and left trays disappear, but programs are still running and they won't close to complete log out or shutting down the OS. When I use the CLI command, it works fine. Thanks for any help you can provide.

  Read the article

• ATI 9550 shows up as laptop in displays after update to 12.04, how do I fix this?

  - by D_H

  My guess is this is on here somewhere but I have searched and even tried looking at bunch of other similar video problems. My ATI 9550 shows up as laptop in displays after update to Ubuntu 12.04, how do I fix this? I found the following command on another post sudo lshw -c video. I get this when I run that command: *-display:0 UNCLAIMED description: VGA compatible controller product: RV350 AS [Radeon 9550] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 32 bits clock: 66MHz capabilities: agp agp-3.0 pm vga_controller bus_master cap_list configuration: latency=32 mingnt=8 resources: memory:c0000000-cfffffff ioport:c000(size=256) memory:e5000000-e500ffff memory:e4000000-e401ffff *-display:1 UNCLAIMED description: Display controller product: RV350 AS [Radeon 9550] (Secondary) vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0.1 bus info: pci@0000:01:00.1 version: 00 width: 32 bits clock: 66MHz capabilities: pm cap_list configuration: latency=32 mingnt=8 resources: memory:d0000000-dfffffff memory:e5010000-e501ffff" This way more info than the command showed in he other post and as far as I can tell right. This doesn't look to me like a laptop video would list? I also see this command xrandr, it reports this: xrandr: Failed to get size of gamma for output default Screen 0: minimum 640 x 480, current 1280 x 1024, maximum 1280 x 1024 default connected 1280x1024+0+0 0mm x 0mm 1280x1024 0.0* 1024x768 0.0 800x600 0.0 640x480 0.0 This is what shows in displays for resolutions but only the 1280x1024 works the others produce tearing in the video. Also I should have mentioned 3D mode does not work. I have tried ATI/AMD drivers the new one won't load and older ones won't work. I found out the newer driver no longer supports the 9550.

  Read the article

• How can I get nVidia CUDA or OpenCL working on a laptop with nVidia discrete card/Intel Integrated Graphics?

  - by PeterDC

  Background: I'm a 3D artist (as a hobby) and have recently started using Ubuntu 12.04 LTS as a dual-boot with Windows 7. It's running on my a fairly new 64-bit Toshiba laptop with an nVidia GeForce GT 540M GPU (graphics card). It also, however has Intel Integrated Graphics (which I suspect Ubuntu's been using). So, when I render my 3D scenes to images on Windows, I am able to choose between using my CPU or my nVidia GPU (faster). From the 3D application, I can set the GPU to use either CUDA or OpenCL. In Ubuntu, there's no GPU option. After doing (too much?) research on the issues with Linux and the nVidia Optimus technology, I am slightly more enlightened, but a lot more confused. I don't care one bit about the Optimus technology, as battery life is not by any means an issue for me. Here's my question: What can I do to be able to use CUDA-utilizing programs (such as Blender) on my nVidia GPU in Ubuntu? Will I need nVidia drivers? (I have heard they don't play nicely with Optimus setups on Linux.) Is there at least a way to use OpenCL on my GPU in Ubuntu?

  Read the article

• Ubuntu 11.10 very slow compared to Windows

  - by Patrick

  I'm new to Ubuntu/linux. Since my PC is very old and not very fast with Windows 7, I decided to give Ubuntu a try, so I downloaded and installed Ubuntu 11.10 today. When I first started it, I had bad 800x600 resolution and it was very slow and annoying. So I installed a driver for my graphic card and now everything looks very nice (1280x1024).But I think it's still far slower than Windows 7. I tried to run in Ubuntu like a few people suggested on the forum but if I log in I get a black screen saying something like "this video mode cannot be displayed". I get that same screen when booting Ubuntu btw, but after about 15 seconds it disappears and just starts Ubuntu. I also installed other drivers for my graphic card but everything stayed the same. I noticed that i.e. when I open Firefox or system settings it takes about 5 seconds till it opens (while Windows 7 takes under 1 second to start i.e. Chrome) and when I do this my CPU usage gets to 100% for a short time. Computer specs: Memory: 2GB RAM Processor: Intel Pentium 4 2.8GHz Graphics Card: Nvidia GeForce 6800 400MHz. I read on various forums that 11.04 works flawless on many PCs, where 11.10 is very slow. Should I install 11.04 or could anybody help me with this problem?

  Read the article

• Ubuntu 12.04 gets overheated, whereas I have no heating problems on Windows 7 whatsoever

  - by G K

  I bought a new laptop which came pre-installed with Windows 7. I love working on Ubuntu and hence installed it. I can work on Windows for 6 hours at a stretch and feel the laptop being only slightly warm, but 15 minutes into running Ubuntu and my laptop is too hot. The battery also drains out very quickly on Ubuntu. 1.5 hrs of backup on Ubuntu compared to 5-6 hrs on Windows. I previously owned a Dell Inspiron N5010 and everything ran smoothly on that. No heating issues. It came with intel i3 processor. So I'm wondering whether this problem has something to do with the processor? (AMD A8) Specs: HP Pavilion G6-2005AX Laptop (APU Quad Core A8/ 4GB/ 500GB/ Win7 HB/ 1.5GB Graph) 1 GB AMD Radeon HD 7670M Dedicated 512 MB AMD Radeon HD 7640G Graphics Integrated Is there any fix for this problem? Thanks in advance. Edit: I've installed ATI proprietary drivers suggested by Ubuntu.

  Read the article

• The best programmer is N times more effective than the worst? Who Cares?

  - by StevenWilkins

  There is a latent belief in programming that the best programmer is N times more effective than the worst. Where N is usually between 10 and 100. Here are some examples: http://www.devtopics.com/programmer-productivity-the-tenfinity-factor/ http://www.joelonsoftware.com/articles/HighNotes.html http://haacked.com/archive/2007/06/25/understanding-productivity-differences-between-developers.aspx There is some debate as to whether or not it's been proven: http://morendil.github.com/folklore.html I'm confident in the accuracy of these statements: The best salesmen in the world are probably 10-100 times better than the worst The best drivers in the world are probably 10-100 times better than the worst The best soccer players in the world are probably 10-100 times better than the worst The best CEOs in the world are probably 10-100 times better than the worst In some cases, I'm sure the difference is greater. In fact, you could probably say that The best [insert any skilled profession here] in the world are probably 10-100 times better than the worst We don't know what N is for the rest of these professions, so why concern ourselves with what the actual number is for programming? Can we not just say that the number is large enough so that it's very important to hire the best people and move on already?

  Read the article

• NetworkManager detects no networks with a RTL8188CE

  - by Cormac O'Brien

  I'm on a 2011 Lenovo Thinkpad T420i with a Realtek RTL8188CE WiFi adapter. Here's the scenario: I pop in the Ubuntu LiveCD to install. Laptop detects all networks in range, I connect to my home network, internet working great. Once Ubuntu finishes installing, the home network I am connected to is the only one which appears in the applet list. Upon restarting or waking from suspend, NetworkManager does not detect any networks – it simply displays "Disconnected" under the Wireless Network section of the menu. I am able to connect to my home network by using the "Connect to Hidden Wireless Network" option and it works immediately. I have yet to test if this works with other SSIDs. I have tried reinstalling the entire OS as well as NetworkManager and my wireless drivers. For hardware info, I ran: cormac@cormac-T420:~$ sudo lshw -c network Here is the output for my wireless card: *-network description: Wireless interface product: RTL8188CE 802.11b/g/n WiFi Adapter vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 01 serial: d0:df:9a:08:73:50 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rtl8192ce driverversion=3.2.0-26-generic firmware=N/A ip=192.168.1.138 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 ioport:5000(size=256) memory:f2500000-f2503fff I can provide more information if required. This was not a problem in Natty or Oneiric. I hope this can be fixed, I don't want to have to ask for an SSID wherever I need to connect.

  Read the article

• ubuntu 13.10 liveboot/installer loads dots, then does nothing

  - by user200245

  Problem: When I load an Ubuntu 13.10 (64-bit) live USB / installer on my laptop, the purple Ubuntu screen with the white dots appears, the dots turn orange (indicating its loading), then after a few seconds the screen turns completely black and nothing else happens. I can not install Ubuntu 13.10 on this computer. What I've Tried: I've re-downloaded the .iso file from canonical. I've burned the .iso to the USB using the default linux usb image writer, and the Windows programs YUMI and Linux Live USB Creator; same thing happens each time. Yes, I'm sure my computer is 64 bit. I'm currently running Linux Mint 15 on it, which runs perfectly. It's a Sager NP7330 / Clevo w230st. extra info A few months I installed Ubuntu 13.04 on this machine, which installed perfectly. Normally I'd install that then dist-upgrade to 13.10, HOWEVER this computer is only a few months old and the wireless/network drivers for my network card were not implemented until kernel 3.11 (which comes w ith 13.10). I tried manually downloading kernel 3.11 and installing it (on 13.04), however the wireless card nor ethernet card still did work with Ubuntu 13.04. So my only real hope is to get 13.10 working. Does anyone know what's up with this?

  Read the article

• Problems with dual monitor & resolutions, only in 14.04

  - by theLadder

  I installed Ubuntu 14.04 but i am having weird problems with my dual monitors and the resolutions. I also tried Xubuntu 14.04 and was having the same problem. I have one 32 inch LG TV with 1920x1080 and one monitor with 1280x1024 resolution. When i first start my 32 inch gets 1360x768, if i then try to change to 1920x1080, everythings looks fine and the prompt asking me if i want to keep settings comes up and starts the countdown, but after 2 seconds my computer freezes, and after a few more seconds it reboots itself. However, if i disable my smaller monitor first, i can change to 1920x1080 on my 32 inch without problems, but if i then activate the second monitor the same problem happens again. in Xubuntu 14.04 i can change the refresh rate, if i run the 32 inch at 30hz or 50hz everytying works, but i would like to be able to run it at 60hz. I'm currently running Xubuntu 13.10 without this problem. My graphics card is a ATI Radeon HD 4850. What is causing this problem, grahpics drivers? Kernel? Xorg? And how do i solve it?

  Read the article

• Ubuntu 13.10. After login, no desktop displayed. Two Nvidia Graphics Cards, Four Monitors

  - by jmerkow

  I am working on an issue with my Ubuntu 13.10 installation. I am attempting to get 4 monitors up and running but I am having some trouble. So far, I installed and updated to the latest NVIDIA drivers (331.20). Initially X would not start (after installation) so I replaced my xorg.conf with xorg.conf.failsafe. This fixed that problem, but then I tried to enable the other 2 monitors (other video card) and xorg fails to start once again (after I login there is no desktop). I am fairly new to linux but I am not a complete beginner, but I'm not comfortable poking around too much on my own to troubleshoot yet.... lspci -nn | grep VGA: 03:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF110 [GeForce GTX 570 Rev. 2] [10de:1086] (rev a1) 05:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF110 [GeForce GTX 580] [10de:1080] (rev a1) It seems that the nvidia-settings tool does not result in a good xorg.conf file. Here it is: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 331.20 (buildmeister@swio-display-x86-rhel47-05) Wed Oct 30 18:20:32 PDT 2013 Section "ServerLayout" Identifier "Default Layout" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "1" EndSection ... Section "Monitor" Identifier "Configured Monitor" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "SHARP HDMI" HorizSync 15.0 - 68.0 VertRefresh 55.0 - 76.0 EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" ModelName "Samsung SyncMaster" HorizSync 0.0 - 0.0 VertRefresh 0.0 EndSection Section "Device" Identifier "Configured Video Device" Driver "vesa" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 570" BusID "PCI:3:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 580" BusID "PCI:5:0:0" EndSection Section "Screen" Identifier "Default Screen" Device "Configured Video Device" Monitor "Configured Monitor" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "nvidiaXineramaInfoOrder" "DFP-1" Option "metamodes" "HDMI-0: nvidia-auto-select +640+0, DVI-I-3: nvidia-auto-select +0+1080" Option "SLI" "Off" Option "MultiGPU" "Off" Option "BaseMosaic" "off" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "DVI-I-2: nvidia-auto-select +0+0" Option "SLI" "Off" Option "MultiGPU" "Off" Option "BaseMosaic" "off" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Disable" EndSection

  Read the article

• Ubuntu Raring on iMac 2008; graphics update ATI Radeon HD 2600 Pro broke my Raring this morning!

  - by user197406

  Was working on my iMac(2008) 20,5" this morning when again some GLX etc updates appeared! As usual I let the update-installer do it's job; when finished updating, my screen got scrambled; I can not work anymore as the screen shivers, shakes and graphics is one big mess. Ctrl+Alt+F1 does not work either as most of the time my screen is black completely! When booting into OSX 10.8.5 (Raring dual boot with OSX 10.8.5), OSX graphics works flawlessly! Can anybody indicate me which ATI Radeon drivers I can download which repairs the 'malversation' of this mornings updates? I guess I will have to startup with some rescue boot disk (Knoppix?) to do manipulations… As I'm still a noob as well I need clear explanations (please). Raring worked perfectly in dual boot on my iMac until this mornings updates! Needles to say the 'final resort' is restarting (re)installation of Ubuntu Raring, but want to attempt to rescue my present 13.04. Thank you! Kind regards, Gaytan!

  Read the article

• How do i reinstall windows back on to linux without flashdrive or cd?

  - by user287536

  I know this is for ubuntu. but elementary os and ubuntu are really similar, so any answers or instructions will work on this os. plus the people here at ubuntu are alot better with these kind of problems. I've installed elementary os, and i am somewhat satisfied. However, many of the addons and applications i used to use are incompatible with linux and wine doesnt work with these apps that work with drivers and plugins. My recovery hp partition was replaced by the grub partition somehow. i dont' have a cd or a working flashdrive. i have found many links, but i dont understand the instructions to a full level. ive heard that you can create a partition, extract your windows iso there, and then boot from it. i have done the first 2 steps, but i dont know how to boot from a certain partition. i know how to with command prompt, but not with terminal and/or grub. Please help? im a noob in linux, ive only installed it for a month

  Read the article

• Help reinstalling Ubuntu on macbook pro

  - by pipsqueaker117

  Ok. I recently installed ubuntu on my macbook pro. Unfortunately, while trying to install the nvidia graphics drivers the system wouldn't reboot, the screen grey for hours. I concluded that I had broken ubuntu, and proceeded to boot into osx and remove the ubuntu partitions. After I had done that, after a reboot, I noticed that "boot linux from hd" was still listed in the bootloader (i'm using rEFIT). I dismissed it. Now, I'm trying to reinstall ubuntu, using the same USB that I successfully installed with earlier. Now, however, when the ubuntu installer is on the "copying files" part this error (more or less) pops up. ERRNO 5: We're sorry, the installer crashed. This error frequently is caused by faulty installation media, the hard disk being too hot... and so on and so forth. I'm not sure what's causing the problem, but I have a hunch that whatever's the reason that's causing linux to show up in rEFIT is the root reason. If anyone could respond, that would be great. PS, and unfortunately no, i do not have a time machine backup.

  Read the article

• Extended display - nightmare

  - by user206343

  I have been struggling for quite a while, and I hope one of you can shed some lights on my issue. I am using Xubuntu 13.10 (Ubuntu 12.04LTS behaves the same way, higher version wouldn't install, LinuxMint didn't install, Fedora didn't install). I am trying to set extend display for two dell monitors 1900x1200. It works great when in mirror mode, but I just cannot extend the display. Either one monitor goes to sleep and the other is unresponsive, or both work but are unusable. This is a link to the picture of my monitors in mirror mode This is link showing what happens after I try to extend the desktop I get the same results if I use aRandr or the built in configuration utility. I have an ATI Radeon X300 card. I cannot use proprietary Catalyst drivers (I would have to use the legacy ones, which would force me into using much older version of the OS). Extension is possible with Windows. I am hoping someone can come up with tweaks that would allow me to run an extended desktop. I truly love Xubuntu (and Ubuntu, unfortunately, Unity is a bit too heavy for my old PC, and I have to run in 2D mode, so 12.04 is as high as I can go). I have tried everything I could find online, but nothing worked thus far. I believe some configuration or something I am missing might work. Please, if you have any idea, do not hesitate. Thanks guys.

  Read the article

< Previous Page | 138 139 140 141 142 143 144 145 146 147 148 149  | Next Page >