Search Results

Search found 3676 results on 148 pages for 'dual band'.

Page 142/148 | < Previous Page | 138 139 140 141 142 143 144 145 146 147 148  | Next Page >

• External USB 3 drive not recognized

  - by ilan123

  Ubuntu 12.10 64 bit seems not to recognize my external hard disk. It is a Vantec NST-310S3 external disk enclosure with a WD 3TB drive. The disk has two NTFS partitions. My PC is a dual boot system. Under Windows 7 the hard disk works fine but I can't make it work with Ubuntu. When the drive is connected to the PC then the command sudo fdisk -l seems to hang forever. Below are the output of lsusb and cat /proc/partitions without the external drive and then with it connected. I added also the last lines of the dmesg command at the end. First without the drive: ilan@linux:~$ lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 13ba:0017 Unknown PS/2 Keyboard+Mouse Adapter Bus 001 Device 004: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver Bus 001 Device 005: ID 0ac8:3420 Z-Star Microelectronics Corp. Venus USB2.0 Camera ilan@linux:~$ cat /proc/partitions major minor #blocks name 8 0 1953514584 sda 8 1 102400 sda1 8 2 629043200 sda2 8 3 367001600 sda3 8 4 1 sda4 8 5 471859200 sda5 8 6 157286400 sda6 8 7 324115456 sda7 8 8 4101120 sda8 11 0 1048575 sr0 Second with the USB 3 drive: ilan@linux:~$ lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 004 Device 002: ID 174c:55aa ASMedia Technology Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 13ba:0017 Unknown PS/2 Keyboard+Mouse Adapter Bus 001 Device 004: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver Bus 001 Device 005: ID 0ac8:3420 Z-Star Microelectronics Corp. Venus USB2.0 Camera ilan@linux:~$ cat /proc/partitions major minor #blocks name 8 0 1953514584 sda 8 1 102400 sda1 8 2 629043200 sda2 8 3 367001600 sda3 8 4 1 sda4 8 5 471859200 sda5 8 6 157286400 sda6 8 7 324115456 sda7 8 8 4101120 sda8 11 0 1048575 sr0 8 16 2930266584 sdb ilan@linux:~$ lsusb -v -s 004:002 Bus 004 Device 002: ID 174c:55aa ASMedia Technology Inc. Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 9 idVendor 0x174c ASMedia Technology Inc. idProduct 0x55aa bcdDevice 1.00 iManufacturer 2 iProduct 3 iSerial 1 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 44 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk-Only iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 ilan@linux:~$ sudo fdisk -l [sudo] password for ilan: Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xf1b4f1ee Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 1258293247 629043200 7 HPFS/NTFS/exFAT /dev/sda3 1258293248 1992296447 367001600 7 HPFS/NTFS/exFAT /dev/sda4 1992298494 3907028991 957365249 f W95 Ext'd (LBA) /dev/sda5 1992298496 2936016895 471859200 7 HPFS/NTFS/exFAT /dev/sda6 2936018944 3250591743 157286400 7 HPFS/NTFS/exFAT /dev/sda7 3250593792 3898824703 324115456 83 Linux /dev/sda8 3898826752 3907028991 4101120 82 Linux swap / Solaris dmesg output after connecting the external drive: [ 23.740567] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 23.740786] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 49.144673] usb 4-1: >new SuperSpeed USB device number 2 using xhci_hcd [ 49.163039] usb 4-1: >Parent hub missing LPM exit latency info. Power management will be impacted. [ 49.166789] usb 4-1: >New USB device found, idVendor=174c, idProduct=55aa [ 49.166793] usb 4-1: >New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 49.166796] usb 4-1: >Product: AS2105 [ 49.166799] usb 4-1: >Manufacturer: ASMedia [ 49.166801] usb 4-1: >SerialNumber: 0123456789ABCDEF [ 49.206372] usbcore: registered new interface driver uas [ 49.228891] Initializing USB Mass Storage driver... [ 49.229042] scsi6 : usb-storage 4-1:1.0 [ 49.229115] usbcore: registered new interface driver usb-storage [ 49.229116] USB Mass Storage support registered. [ 64.045528] scsi 6:0:0:0: >Direct-Access WDC WD30 EZRX-00MMMB0 80.0 PQ: 0 ANSI: 0 [ 64.046224] sd 6:0:0:0: >Attached scsi generic sg2 type 0 [ 64.046881] sd 6:0:0:0: >[sdb] Very big device. Trying to use READ CAPACITY(16). [ 64.047610] sd 6:0:0:0: >[sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [ 64.048368] sd 6:0:0:0: >[sdb] Write Protect is off [ 64.048373] sd 6:0:0:0: >[sdb] Mode Sense: 23 00 00 00 [ 64.048984] sd 6:0:0:0: >[sdb] No Caching mode page present [ 64.048987] sd 6:0:0:0: >[sdb] Assuming drive cache: write through [ 64.049297] sd 6:0:0:0: >[sdb] Very big device. Trying to use READ CAPACITY(16). [ 64.050942] sd 6:0:0:0: >[sdb] No Caching mode page present [ 64.050944] sd 6:0:0:0: >[sdb] Assuming drive cache: write through [ 94.245006] usb 4-1: >reset SuperSpeed USB device number 2 using xhci_hcd [ 94.262553] usb 4-1: >Parent hub missing LPM exit latency info. Power management will be impacted. [ 94.263805] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c00 [ 94.263808] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c40 [ 125.262722] usb 4-1: >reset SuperSpeed USB device number 2 using xhci_hcd [ 125.280304] usb 4-1: >Parent hub missing LPM exit latency info. Power management will be impacted. [ 125.281511] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c00 [ 125.281516] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c40

  Read the article

• Installing Ubuntu 12.04.1 x64 with Fake RAID 1 [SOLVED]

  - by Arkadius

  I had: Software: Dual boot with Windows XP Ubuntu 10.04 LTS x32 Hardware Fake RAID 1 (mirroring) with 2x1 TB: Partition 1 - Windows Partition 2 - SWAP Partition 3 - / (root) Partition 4 - Extended Partition 5 - /home Partition 6 - /data arek@domek:/var/log/installer$ sudo fdisk -l Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000de1b9 Device Boot Start End Blocks Id System /dev/sda1 * 63 524297339 262148638+ 7 HPFS/NTFS/exFAT /dev/sda2 524297340 528506369 2104515 82 Linux swap / Solaris /dev/sda3 528506370 570468149 20980890 83 Linux /dev/sda4 570468150 1953118439 691325145 5 Extended /dev/sda5 570468213 675340469 52436128+ 83 Linux /dev/sda6 675340533 1953118439 638888953+ 83 Linux Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000de1b9 Device Boot Start End Blocks Id System /dev/sdb1 * 63 524297339 262148638+ 7 HPFS/NTFS/exFAT /dev/sdb2 524297340 528506369 2104515 82 Linux swap / Solaris /dev/sdb3 528506370 570468149 20980890 83 Linux /dev/sdb4 570468150 1953118439 691325145 5 Extended /dev/sdb5 570468213 675340469 52436128+ 83 Linux /dev/sdb6 675340533 1953118439 638888953+ 83 Linux arek@domek:/var/log/installer$ ls -l /dev/mapper/ total 0 crw------- 1 root root 10, 236 Oct 7 20:17 control lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha -> ../dm-0 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha1 -> ../dm-1 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha2 -> ../dm-2 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha3 -> ../dm-3 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha4 -> ../dm-4 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha5 -> ../dm-5 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha6 -> ../dm-6 I wanted to upgrade from 10.04 x32 to 12.04 x64 using FRESH installation. So, run installation of Ubuntu 12.04.1 x64 LTS using alternate CD. During the installation I selected manual partitioning and to: - Use and Format / (root) - Use and Format SWAP - Use and Keep data on /home - Use and Keep data on /data After I clicked "Continue" I get error creating and formatting SWAP partition. I go to terminal with Alt + F2 (?) and hit enter. I discovered that there was visible RAID as only disk with NO partitions. Something like this: arek@domek:/var/log/installer$ ls -l /dev/mapper/ lrwxrwxrwx 1 root root 7 Oct 7 20:17 /dev/mapper/pdc_jhjbcaha -> ../dm-0 arek@domek:/var/log/installer$ ls -l /dev/dm* brw-rw---- 1 root disk 252, 0 Oct 7 20:17 /dev/dm-0 So I switched to log console Alt+F3 (?) and saw errors like below: Oct 7 14:02:45 check-missing-firmware: /dev/.udev/firmware-missing does not exist, skipping Oct 7 14:02:45 check-missing-firmware: /run/udev/firmware-missing does not exist, skipping Oct 7 14:02:45 check-missing-firmware: no missing firmware in /dev/.udev/firmware-missing /run/udev/firmware-missing Oct 7 14:02:45 anna-install: Installing dmraid-udeb Oct 7 14:02:45 anna[12599]: DEBUG: retrieving dmraid-udeb 1.0.0.rc16-4.1ubuntu8 Oct 7 14:02:49 anna[12599]: DEBUG: retrieving libdmraid1.0.0.rc16-udeb 1.0.0.rc16-4.1ubuntu8 Oct 7 14:02:49 anna[12599]: DEBUG: retrieving kpartx-udeb 0.4.9-3ubuntu5 Oct 7 14:02:49 disk-detect: Serial ATA RAID disk(s) detected. Oct 7 14:02:55 disk-detect: Enabling dmraid support. Oct 7 14:02:55 disk-detect: RAID set "pdc_jhjbcaha" was activated Oct 7 14:02:55 HERE --> dmraid-activate: ERROR: Cannot retrieve RAID set information for pdc_jhjbcaha Oct 7 14:02:56 check-missing-firmware: /dev/.udev/firmware-missing does not exist, skipping Oct 7 14:02:56 check-missing-firmware: /run/udev/firmware-missing does not exist, skipping Oct 7 14:02:56 check-missing-firmware: no missing firmware in /dev/.udev/firmware-missing /run/udev/firmware-missing Oct 7 14:02:57 main-menu[428]: DEBUG: resolver (libnewt0.52): package doesn't exist (ignored) Oct 7 14:02:57 main-menu[428]: DEBUG: resolver (ext2-modules): package doesn't exist (ignored) Oct 7 14:02:57 main-menu[428]: INFO: Menu item 'partman-base' selected Oct 7 14:02:57 kernel: [ 316.512999] NTFS driver 2.1.30 [Flags: R/O MODULE]. Oct 7 14:02:57 kernel: [ 316.523221] Btrfs loaded Oct 7 14:02:57 kernel: [ 316.534781] JFS: nTxBlock = 8192, nTxLock = 65536 Oct 7 14:02:57 kernel: [ 316.554749] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled Oct 7 14:02:57 kernel: [ 316.555336] SGI XFS Quota Management subsystem Oct 7 14:02:58 md-devices: mdadm: No arrays found in config file or automatically Oct 7 14:02:58 partman: No matching physical volumes found Oct 7 14:02:58 partman: No volume groups found Oct 7 14:02:58 partman: Reading all physical volumes. This may take a while... Oct 7 14:02:58 partman-lvm: No volume groups found Oct 7 14:02:58 partman: Error running 'tune2fs -l /dev/mapper/pdc_jhjbcaha' Oct 7 14:02:58 partman: Error running 'tune2fs -l /dev/mapper/pdc_jhjbcaha' Oct 7 14:02:58 partman: Error running 'tune2fs -l /dev/mapper/pdc_jhjbcaha' Oct 7 14:06:11 HERE --> partman: mkswap: can't open '/dev/mapper/pdc_jhjbcaha2': No such file or directory Oct 7 14:07:28 init: starting pid 401, tty '/dev/tty2': '-/bin/sh' Oct 7 14:15:00 net/hw-detect.hotplug: Detected hotpluggable network interface eth0 Oct 7 14:15:00 net/hw-detect.hotplug: Detected hotpluggable network interface lo As You can see there are 2 errors Oct 7 14:02:55 dmraid-activate: ERROR: Cannot retrieve RAID set information for pdc_jhjbcaha and Oct 7 14:06:11 partman: mkswap: can't open '/dev/mapper/pdc_jhjbcaha2': No such file or directory I looked in the internet and try to run command "dmraid -ay" and get something like that: dmraid -ay /dev/mapper/pdc_jhjbcaha -> Already activated /dev/mapper/pdc_jhjbcaha1 -> Successfully activated /dev/mapper/pdc_jhjbcaha2 -> Successfully activated /dev/mapper/pdc_jhjbcaha3 -> Successfully activated /dev/mapper/pdc_jhjbcaha4 -> Successfully activated /dev/mapper/pdc_jhjbcaha5 -> Successfully activated /dev/mapper/pdc_jhjbcaha6 -> Successfully activated Then I returned to installer with Alt+F1 (?) and click "Return" to return to partitioning menu. I did NOT change anything just selected again "Continue" and everything goes smoothly. I hope this will help someone. arkadius

  Read the article

• Xobni Plus for Outlook [Review]

  - by The Geek

  Overview Xobni Plus is an addin that will bring a sidebar to Outlook which allows you to search through your inbox and contacts a lot easier. It provides the ability to search and keep track of your favorite social networks. Searching with Xobni is a lot more powerful than the default search feature in Outlook. It let’s you drill down your searches to conversations, email, links, and attachments. It now supports Outlook 2010 both 32 & 64-bit versions. Installation & Setup Installation is easy following the wizard. After completing the wizard you can tell you’re friends on Facebook and Twitter that you are now using it. You can also decide to join their Product Improvement Program if you want. After installation when you open Outlook, Xobni appears as a sidebar on the right side. Don’t worry about it always being in the way, as you can hide it if you need more room for other Outlook functions. After Xobni free is installed, you can upgrade to the Plus version at any time. A new window will open up and you can use your Credit Card, PayPal, or redeem a code if you have one. Features & Use Where to begin with the amount of features available in Xobni Plus? It really has an amazing amount of cool features. Of course you’ll have all of the features of the Free Version which we previously covered…and a lot more. After Xobni is installed you’ll notice a section for it on the Ribbon. From here you can search Xobni, show or hide the Sidebar, and change other options. It allows you to easily keep up with various social networks like Facebook, Twitter, and LinkedIn… Check out email analytics and contact ranks. Click on the Files Exchanged tab to search for specific attachments. Quickly search links exchanged with your contacts. Hover over a link to get a preview of what it entails. It gives you the ability to index all of your Yahoo mail as well, without the need for purchasing Yahoo Plus! Then your Yahoo messages appear in the Xobni sidebar. When you select a contact you can see related messages from you Yahoo account. Easily index all of your mail…including Yahoo mail for better organization and faster search results. There are several options you can select to change the way Xobni works. From setting up your Yahoo email, Indexing options, and much more. Additional Features of Xobni Plus Advanced Search Capabilities – Filter results, Boolean & Phrase Search, Ability to search Appointments & Tasks, Advanced Search Builder Search unlimited PST data files Xobni contacts in the compose screen Find links exchanged with your contacts View calendar appointments One year premium tech support No Ads! Performance We ran Xobni Plus on Outlook 2010 32-bit on a Dual-Core AMD Athlon system with 4GB of RAM and found it to run quite smoothly. However, we did notice it would sometimes slow down launching Outlook, especially if other apps are running at the same time. Product Support When you buy a license for Xobni Plus you get a full year of premium tech support. They provide a Questions and Answers page on their site where you can run a search query and answers appear instantly. You can contact support directly as a Plus member through their web form and they advise the turn around time is 2 business days. However, when we tested it, we received a response within 24 hours. They also provide FAQ, Community forum, and you can download the Owners Manual in PDF format from the support page. Conclusion Xobni Plus is a very powerful addin for Outlook and includes a lot more features that we didn’t cover in this review. You can download Xobni free edition which includes an 8 day free trial of the Plus version. This provides a good way to start getting familiar with it. Then upgrade to Xobni Plus at any time for $29.95. Once you get started, you’ll find the sidebar is nicely laid out and intuitive to use. If you live out of Outlook during the day, Xobni Plus is a great addition for fast and powerful searches. It provides an easy way to keep all of your contacts and messages well organized and easy to find. Xobni Plus works with XP, Vista, and Windows 7 (32 & 64-bit editions) Outlook 2003, 2007 and both 32 & 64-bit editions of Outlook 2010. Download Xobni Plus Download Xobni Free Edition Rating Installation: 8 Ease of Use: 8 Features: 9 Performance: 8 Product Support: 8 Similar Articles Productive Geek Tips Xobni Free Powers Up Outlook’s Search and ContactsCreate an Email Template in Outlook 2003Add Social Elements to Your Gmail Contacts with RapportiveChange Outlook Startup FolderClear Outlook Searches and MRU (Most Recently Used) Lists TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 10 Superb Firefox Wallpapers OpenDNS Guide Google TV The iPod Revolution Ultimate Boot CD can help when disaster strikes Windows Firewall with Advanced Security – How To Guides

  Read the article

• How can I read kindle book under xfce(ubuntu)? (using chromebook)(wine not working)

  - by yshn

  I'm using chromebook, dual booting xfce(ubuntu) and cr os. The ebook I bought on amazon is not supported on kindle cloud reader. (Under xfce)I downloaded wine and tried installing kindle for pc under wine, and after couples of times of trials, it always said installation error and could not install kindle, and it's been giving me: Unhandled exception: unimplemented function msvcp90.dll.??0?$basic_ofstream@DU?$char_traits@D@std@@@std@@QAE@XZ called in 32-bit code (0x7b839cf2). Register dump: CS:0023 SS:002b DS:002b ES:002b FS:0063 GS:006b EIP:7b839cf2 ESP:0033fcd4 EBP:0033fd38 EFLAGS:00000287( - -- I S - -P-C) EAX:7b826245 EBX:7b894ff4 ECX:00000008 EDX:0033fcf4 ESI:80000100 EDI:00dca568 Stack dump: 0x0033fcd4: 0033fd58 00000008 00000030 80000100 0x0033fce4: 00000001 00000000 7b839cf2 00000002 0x0033fcf4: 7e24b340 7e24f2ca 0000000d 00110000 0x0033fd04: 7bc47a0d 7e1dbff4 7e1417f0 00dca568 0x0033fd14: 0033fd24 7bc65d0b 00110000 00000000 0x0033fd24: 0033fd44 7e141801 7b839caa 7e1dbff4 000c: sel=0067 base=00000000 limit=00000000 16-bit r-x Backtrace: =0 0x7b839cf2 in kernel32 (+0x29cf2) (0x0033fd38) 1 0x7e24b2a8 in msvcp90 (+0x3b2a7) (0x0033fd68) 2 0x7e216c9d in msvcp90 (+0x6c9c) (0x0033fde8) 3 0x00938fdd in kindle (+0x538fdc) (0x0033fde8) 4 0x0089dc71 in kindle (+0x49dc70) (0x0033fe70) 5 0x7b859cdc call_process_entry+0xb() in kernel32 (0x0033fe88) 6 0x7b85af4f in kernel32 (+0x4af4e) (0x0033fec8) 7 0x7bc71db0 call_thread_func_wrapper+0xb() in ntdll (0x0033fed8) 8 0x7bc7486d call_thread_func+0x7c() in ntdll (0x0033ffa8) 9 0x7bc71d8e RtlRaiseException+0x21() in ntdll (0x0033ffc8) 10 0x7bc49f4e call_dll_entry_point+0x61d() in ntdll (0x0033ffe8) 0x7b839cf2: subl $4,%esp Modules: Module Address Debug info Name (130 modules) PE 340000- 37d000 Deferred ssleay32 PE 390000- 3ca000 Deferred webcoreviewer PE 3d0000- 3e0000 Deferred pthreadvc2 PE 400000- 1433000 Export kindle PE 1440000- 155c000 Deferred libeay32 PE 1560000- 169f000 Deferred qtscript4 PE 16a0000- 1795000 Deferred libxml2 PE 17a0000- 18c7000 Deferred javascriptcore PE 18d0000- 1974000 Deferred cflite PE 1980000- 2048000 Deferred libwebcore PE 2050000- 208d000 Deferred libjpeg PE 10000000-10a34000 Deferred qtwebkit4 PE 4a800000-4a8eb000 Deferred icuuc46 PE 4a900000-4aa36000 Deferred icuin46 PE 4ad00000-4bb80000 Deferred icudt46 PE 5a4c0000-5a4d4000 Deferred zlib1 PE 61000000-61056000 Deferred qtxml4 PE 62000000-62093000 Deferred qtsql4 PE 64000000-640ef000 Deferred qtnetwork4 PE 65000000-657b8000 Deferred qtgui4 PE 67000000-67228000 Deferred qtcore4 PE 78050000-780b9000 Deferred msvcp100 PE 78aa0000-78b5e000 Deferred msvcr100 ELF 7b800000-7ba15000 Dwarf kernel32 -PE 7b810000-7ba15000 \ kernel32 ELF 7bc00000-7bcc3000 Dwarf ntdll -PE 7bc10000-7bcc3000 \ ntdll ELF 7bf00000-7bf04000 Deferred ELF 7d7f7000-7d800000 Deferred librt.so.1 ELF 7d800000-7d818000 Deferred libresolv.so.2 ELF 7d818000-7d861000 Deferred libdbus-1.so.3 ELF 7d861000-7d873000 Deferred libp11-kit.so.0 ELF 7d873000-7d8f8000 Deferred libgcrypt.so.11 ELF 7d8f8000-7d90a000 Deferred libtasn1.so.3 ELF 7d90a000-7d913000 Deferred libkrb5support.so.0 ELF 7d913000-7d9e2000 Deferred libkrb5.so.3 ELF 7da42000-7da47000 Deferred libgpg-error.so.0 ELF 7da47000-7da6f000 Deferred libk5crypto.so.3 ELF 7da6f000-7da81000 Deferred libavahi-client.so.3 ELF 7da81000-7da8f000 Deferred libavahi-common.so.3 ELF 7da8f000-7db53000 Deferred libgnutls.so.26 ELF 7db53000-7db91000 Deferred libgssapi_krb5.so.2 ELF 7db91000-7dbe4000 Deferred libcups.so.2 ELF 7dc21000-7dc55000 Deferred uxtheme -PE 7dc30000-7dc55000 \ uxtheme ELF 7dc55000-7dc5b000 Deferred libxfixes.so.3 ELF 7dc5b000-7dc66000 Deferred libxcursor.so.1 ELF 7dc6a000-7dc6e000 Deferred libkeyutils.so.1 ELF 7dc6e000-7dc73000 Deferred libcom_err.so.2 ELF 7dca5000-7dccf000 Deferred libexpat.so.1 ELF 7dccf000-7dd03000 Deferred libfontconfig.so.1 ELF 7dd03000-7dd13000 Deferred libxi.so.6 ELF 7dd13000-7dd17000 Deferred libxcomposite.so.1 ELF 7dd17000-7dd20000 Deferred libxrandr.so.2 ELF 7dd20000-7dd2a000 Deferred libxrender.so.1 ELF 7dd2a000-7dd30000 Deferred libxxf86vm.so.1 ELF 7dd30000-7dd34000 Deferred libxinerama.so.1 ELF 7dd34000-7dd3b000 Deferred libxdmcp.so.6 ELF 7dd3b000-7dd5c000 Deferred libxcb.so.1 ELF 7dd5c000-7dd76000 Deferred libice.so.6 ELF 7dd76000-7deaa000 Deferred libx11.so.6 ELF 7deaa000-7debc000 Deferred libxext.so.6 ELF 7debc000-7dec5000 Deferred libsm.so.6 ELF 7ded4000-7df67000 Deferred winex11 -PE 7dee0000-7df67000 \ winex11 ELF 7df67000-7e001000 Deferred libfreetype.so.6 ELF 7e001000-7e023000 Deferred iphlpapi -PE 7e010000-7e023000 \ iphlpapi ELF 7e023000-7e03e000 Deferred wsock32 -PE 7e030000-7e03e000 \ wsock32 ELF 7e03e000-7e071000 Deferred wintrust -PE 7e040000-7e071000 \ wintrust ELF 7e071000-7e129000 Deferred crypt32 -PE 7e080000-7e129000 \ crypt32 ELF 7e129000-7e158000 Deferred msvcr90 -PE 7e130000-7e158000 \ msvcr90 ELF 7e158000-7e1e5000 Deferred msvcrt -PE 7e170000-7e1e5000 \ msvcrt ELF 7e1e5000-7e2ca000 Dwarf msvcp90 -PE 7e210000-7e2ca000 \ msvcp90 ELF 7e2ca000-7e2ec000 Deferred imm32 -PE 7e2d0000-7e2ec000 \ imm32 ELF 7e2ec000-7e3de000 Deferred oleaut32 -PE 7e300000-7e3de000 \ oleaut32 ELF 7e3de000-7e418000 Deferred winspool -PE 7e3f0000-7e418000 \ winspool ELF 7e418000-7e4f7000 Deferred comdlg32 -PE 7e420000-7e4f7000 \ comdlg32 ELF 7e4f7000-7e51f000 Deferred msacm32 -PE 7e500000-7e51f000 \ msacm32 ELF 7e51f000-7e5cc000 Deferred winmm -PE 7e530000-7e5cc000 \ winmm ELF 7e5cc000-7e641000 Deferred rpcrt4 -PE 7e5e0000-7e641000 \ rpcrt4 ELF 7e641000-7e749000 Deferred ole32 -PE 7e660000-7e749000 \ ole32 ELF 7e749000-7e841000 Deferred comctl32 -PE 7e750000-7e841000 \ comctl32 ELF 7e841000-7ea52000 Deferred shell32 -PE 7e850000-7ea52000 \ shell32 ELF 7ea52000-7eabc000 Deferred shlwapi -PE 7ea60000-7eabc000 \ shlwapi ELF 7eabc000-7ead5000 Deferred version -PE 7eac0000-7ead5000 \ version ELF 7ead5000-7eb35000 Deferred advapi32 -PE 7eae0000-7eb35000 \ advapi32 ELF 7eb35000-7ebf2000 Deferred gdi32 -PE 7eb40000-7ebf2000 \ gdi32 ELF 7ebf2000-7ed32000 Deferred user32 -PE 7ec00000-7ed32000 \ user32 ELF 7ed32000-7ed58000 Deferred mpr -PE 7ed40000-7ed58000 \ mpr ELF 7ed58000-7ed6e000 Deferred libz.so.1 ELF 7ed6e000-7eddd000 Deferred wininet -PE 7ed80000-7eddd000 \ wininet ELF 7eddd000-7ee0f000 Deferred ws2_32 -PE 7ede0000-7ee0f000 \ ws2_32 ELF 7ee0f000-7ee1c000 Deferred libnss_files.so.2 ELF 7ee1c000-7ee28000 Deferred libnss_nis.so.2 ELF 7ee28000-7ee42000 Deferred libnsl.so.1 ELF 7ee42000-7ee4b000 Deferred libnss_compat.so.2 ELF 7efd4000-7f000000 Deferred libm.so.6 ELF f74a3000-f74a7000 Deferred libxau.so.6 ELF f74a8000-f74ad000 Deferred libdl.so.2 ELF f74ad000-f7657000 Deferred libc.so.6 ELF f7658000-f7673000 Deferred libpthread.so.0 ELF f7675000-f767b000 Deferred libuuid.so.1 ELF f7682000-f77c4000 Dwarf libwine.so.1 ELF f77c6000-f77e8000 Deferred ld-linux.so.2 ELF f77e8000-f77e9000 Deferred [vdso].so Threads: process tid prio (all id:s are in hex) 0000000e services.exe 0000001f 0 0000001e 0 00000015 0 00000010 0 0000000f 0 00000012 winedevice.exe 0000001c 0 00000019 0 00000014 0 00000013 0 0000001a plugplay.exe 00000020 0 0000001d 0 0000001b 0 00000037 explorer.exe 00000038 0 00000042 (D) C:\Program Files (x86)\Amazon\Kindle\Kindle.exe 00000043 0 <== System information: Wine build: wine-1.4 Platform: i386 (WOW64) Host system: Linux Host version: 3.8.11 How can this be fixed?

  Read the article

• Can't see my partitions after grub recovery

  - by dimbo

  I stupidly inserted the windows CD into my dual boot Ubuntu 11.10 / windows xp system. I just wanted to see if I could install windows on my external usb HD, but didn't actually go ahead with the install. It seems like the windows CD messed up my MBR and I had to use boot-repair and the ubuntu 11.10 live CD to gain access to ubuntu again. It seems to boot up a little differently (slower) but works. However, I now cant see any of my partitions in nautilus (there are 3). When I open gparted, it just shows my whole hard drive as unallocated (I know it has a windows partition that works and my ubuntu partition that I am using now). If I insert a usb pen, it is also not visible in nautilus but in gparted shows up as a FAT32 partition (which is correct although I cannot access it). sudo fdisk -l gives the following : demian@dimbo-TP:~$ sudo fdisk -l [sudo] password for demian: omitting empty partition (5) Disk /dev/sda: 320.1 GB, 320072933376 bytes 240 heads, 63 sectors/track, 41345 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x877b877b Device Boot Start End Blocks Id System /dev/sda1 * 63 63842309 31921123+ 7 HPFS/NTFS/exFAT /dev/sda2 63844350 133484084 34819867+ 5 Extended /dev/sda3 127636488 133484084 2923798+ 82 Linux swap / Solaris /dev/sda4 133484085 625137344 245826630 83 Linux /dev/sda5 63844352 123445247 29800448 83 Linux /dev/sda6 123447296 127635455 2094080 82 Linux swap / Solaris Disk /dev/sdb: 8100 MB, 8100249600 bytes 12 heads, 40 sectors/track, 32960 cylinders, total 15820800 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdb1 * 5992 15820799 7907404 c W95 FAT32 (LBA) Here is my grub.conf file. Like I said before, I had to use the 'boot-repair' utility with the live cd to get grub working again. I think that this utility maybe created a new grub for me because the startup is definitely not the same. The screen goes blank for a while, and then the ubuntu loading dots come up for a brief moment (instead of during the whole startup process) before the dektop is displayed. Anyway : # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=10 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.0.0-12-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a linux /boot/vmlinuz-3.0.0-12-generic root=UUID=5349ff67-b7b7-489f-a881-ae49c1dcd84a ro quiet splash vt.handoff=7 initrd /boot/initrd.img-3.0.0-12-generic } menuentry 'Ubuntu, with Linux 3.0.0-12-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a echo 'Loading Linux 3.0.0-12-generic ...' linux /boot/vmlinuz-3.0.0-12-generic root=UUID=5349ff67-b7b7-489f-a881-ae49c1dcd84a ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.0.0-12-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Microsoft Windows XP Professional (on /dev/sda1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 72A89361A89322A1 drivemap -s (hd0) ${root} chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### How can I get things back to normal. Thanks, Demian.

  Read the article

• How can I set my screen resolution to match my TV?

  - by Scott Severance

  I have a computer in my classroom that's connected to an LG smart TV (that's actually not so smart. I wouldn't recommend buying one.). For the touch interface, the TV wants a resolution of 1920x1080 at 60Hz. However, I can't seem to set the computer to that resolution. The display settings only offer 1024x768 and 640x480. The computer dual boots with Windows XP, where widescreen options are available in approximately the required size, but the exact resolution -- or even aspect ratio-- isn't available in XP either. I tried the following command: xrandr -s 1920x1080 -r 60 The response was: Size 1920x1080 not found in available modes Back in the old days, the solution would be to edit xorg.conf. However, since that file no longer exists, and I haven't found up-to-date info, I don't know what else to do. If it helps, this machine will never be connected to a different display, so resolution flexibility isn't important. Here's the output of lshw: *-display:0 description: VGA compatible controller product: 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 03 width: 64 bits clock: 33MHz capabilities: vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:42 memory:fe800000-febfffff memory:d0000000-dfffffff ioport:ecd8(size=8) *-display:1 UNCLAIMED description: Display controller product: 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 03 width: 64 bits clock: 33MHz According to the system settings, my graphics driver is unknown and my "experience" is standard. This is 64-bit Ubuntu 12.04 (Precise) Note: There are a number of similar questions to this one, but they didn't include any answers that helped me. Update After posting this question, I noticed one in the sidebar that I hadn't found through search but which appeared to contain the answer. Based on that question, I created the /etc/X11/xorg.conf file below: Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" FontPath "built-ins" EndSection Section "Module" Load "glx" Load "dri2" Load "dbe" Load "dri" Load "record" Load "extmod" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "LG" ModelName "Smart TV" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "DRI" # [<bool>] #Option "ColorKey" # <i> #Option "VideoKey" # <i> #Option "FallbackDebug" # [<bool>] #Option "Tiling" # [<bool>] #Option "LinearFramebuffer" # [<bool>] #Option "Shadow" # [<bool>] #Option "SwapbuffersWait" # [<bool>] #Option "TripleBuffer" # [<bool>] #Option "XvMC" # [<bool>] #Option "XvPreferOverlay" # [<bool>] #Option "DebugFlushBatches" # [<bool>] #Option "DebugFlushCaches" # [<bool>] #Option "DebugWait" # [<bool>] #Option "HotPlug" # [<bool>] #Option "RelaxedFencing" # [<bool>] Identifier "Card0" Driver "intel" BusID "PCI:0:2:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 24 #SubSection "Display" # Viewport 0 0 # Depth 1 #EndSubSection #SubSection "Display" # Viewport 0 0 # Depth 4 #EndSubSection #SubSection "Display" # Viewport 0 0 # Depth 8 #EndSubSection #SubSection "Display" # Viewport 0 0 # Depth 15 #EndSubSection #SubSection "Display" # Viewport 0 0 # Depth 16 #EndSubSection SubSection "Display" Viewport 0 0 Depth 24 Modes "1024x768" "1920x1080" EndSubSection EndSection According to /var/log/Xorg.0.log, my settings aren't being applied. In fact, I wonder if the config file is even being read. [ 1209.083] (**) intel(0): Depth 24, (--) framebuffer bpp 32 [ 1209.084] (==) intel(0): RGB weight 888 [ 1209.084] (==) intel(0): Default visual is TrueColor [ 1209.084] (II) intel(0): Integrated Graphics Chipset: Intel(R) G41 [ 1209.084] (--) intel(0): Chipset: "G41" [ 1209.084] (**) intel(0): Relaxed fencing enabled [ 1209.084] (**) intel(0): Wait on SwapBuffers? enabled [ 1209.084] (**) intel(0): Triple buffering? enabled [ 1209.084] (**) intel(0): Framebuffer tiled [ 1209.084] (**) intel(0): Pixmaps tiled [ 1209.084] (**) intel(0): 3D buffers tiled [ 1209.084] (**) intel(0): SwapBuffers wait enabled [ 1209.084] (==) intel(0): video overlay key set to 0x101fe [ 1209.172] (II) intel(0): Output VGA1 using monitor section Monitor0 [ 1209.260] (II) intel(0): EDID for output VGA1 [ 1209.260] (II) intel(0): Printing probed modes for output VGA1 [ 1209.260] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 1209.260] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 1209.260] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 1209.260] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz) [ 1209.260] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz) [ 1209.260] (II) intel(0): Output VGA1 connected [ 1209.260] (II) intel(0): Using user preference for initial modes [ 1209.260] (II) intel(0): Output VGA1 using initial mode 1024x768 [ 1209.260] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 1209.260] (II) intel(0): Kernel page flipping support detected, enabling [ 1209.260] (==) intel(0): DPI set to (96, 96)

  Read the article

• How do I rotate my monitor using xorg?

  - by user1106405

  I have just installed KUbuntu 12.10, and I am attempting to rotate my monitor 90 deg to the left. When I add the option to rotate, the monitor seems to ignore the directive. I'm currently using dual 02:00.0 VGA compatible controller: NVIDIA Corporation GF104 [GeForce GTX 460] (rev a1) 03:00.0 VGA compatible controller: NVIDIA Corporation GF104 [GeForce GTX 460] (rev a1) and NVidia driver version 310 My xorg.conf is as follows: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 304.51 (buildd@komainu) Fri Oct 12 12:53:49 UTC 2012 # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 310.14 ([email protected]) Tue Oct 9 13:04:01 PDT 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 1280 0 Screen 1 "Screen1" RightOf "Screen0" Screen 2 "Screen2" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "1" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Samsung SyncMaster" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 60.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" ModelName "DELL 1908WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 EndSection Section "Monitor" Identifier "Monitor2" VendorName "Unknown" ModelName "DELL 1907FP" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 76.0 EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 460" BusID "PCI:2:0:0" Screen 0 EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 460" BusID "PCI:2:0:0" Screen 1 EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 460" BusID "PCI:3:0:0" EndSection Section "Screen" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0; DFP-0: nvidia-auto-select +0+0; DFP-0: 1920x1200 +0+0; DFP-0: 1920x1200_60 +0+0; DFP-0: 1600x1200 +0+0; DFP-0: 1600x1200_60 +0+0; DFP-0: 1280x1024 +0+0; DFP-0: 1280x1024_60 +0+0; DFP-0: 1280x960 +0+0; DFP-0: 1280x960_60 +0+0; DFP-0: 1024x768 +0+0; DFP-0: 1024x768_60 +0+0; DFP-0: 800x600 +0+0; DFP-0: 800x600_60 +0+0; DFP-0: 800x600_56 +0+0; DFP-0: 640x480 +0+0; DFP-0: 640x480_60 +0+0; DFP-0: nvidia-auto-select @1920x1080 +0+0; DFP-0: nvidia-auto-select @1920x720 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "DFP-0: nvidia-auto-select +0+0; DFP-0: nvidia-auto-select +0+0; DFP-0: 1920x1200 +0+0; DFP-0: 1920x1200_60 +0+0; DFP-0: 1600x1200 +0+0; DFP-0: 1600x1200_60 +0+0; DFP-0: 1280x1024 +0+0; DFP-0: 1280x1024_60 +0+0; DFP-0: 1280x960 +0+0; DFP-0: 1280x960_60 +0+0; DFP-0: 1024x768 +0+0; DFP-0: 1024x768_60 +0+0; DFP-0: 800x600 +0+0; DFP-0: 800x600_60 +0+0; DFP-0: 800x600_56 +0+0; DFP-0: 640x480 +0+0; DFP-0: 640x480_60 +0+0; DFP-0: nvidia-auto-select +0+0; DFP-0: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "DFP-2: nvidia-auto-select +0+0" Option "Rotate" "left" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Enable" EndSection Edit: If I delete the xorg.conf and reboot, I am able to rotate my monitor, however, my third monitor is not recognized: Screen 0: minimum 8 x 8, current 3360 x 1200, maximum 16384 x 16384 DVI-I-0 disconnected (normal left inverted right x axis y axis) DVI-I-1 disconnected (normal left inverted right x axis y axis) DVI-I-2 connected 1920x1200+0+0 (normal left inverted right x axis y axis) 518mm x 324mm 1920x1200 60.0*+ 1600x1200 60.0 1280x1024 60.0 1280x960 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 HDMI-0 disconnected (normal left inverted right x axis y axis) DVI-I-3 connected 1440x900+1920+0 (normal left inverted right x axis y axis) 408mm x 255mm 1440x900 59.9*+ 75.0 1280x1024 75.0 60.0 1280x800 59.8 1152x864 75.0 1024x768 75.0 70.1 60.0 800x600 75.0 72.2 60.3 56.2 640x480 75.0 72.8 59.9

  Read the article

• WEBLOGIC 12C HANDS-ON BOOTCAMP

  - by agallego

    Oracle PartnerNetwork | Account | Feedback   JOIN THE ORACLE WEBLOGIC PARTNER COMMUNITY AND ATTEND A WEBLOGIC 12C HANDS-ON BOOTCAMP Dear partner As a valued partner we would like to invite you for the WebLogic Partner Community and our WebLogic 12c hands-on Bootcamps – free of charge! Please first login at http://partner.oracle.com and then visit: WebLogic Partner Community. (If you need support with your account please contact the Oracle Partner Business Center). The goal of the WebLogic Partner Community is to provide you with the latest information on Oracle's offerings and to facilitate the exchange of experience within community members. Register Now FREE Assessment vouchers to become certified and WebLogic Server 12c 200 new Features and Training Connect and Network   WebLogic Blogs   WebLogic on Facebook   WebLogic on LinkedIn   WebLogic on Twitter   WebLogic on Oracle Mix WebLogic 12c hands-on Workshops We offer free3 days hands-on WebLogic 12c workshops for Oracle partners who want to become Application Grid Specialized: Register Here! Country Date Location Registration   Germany  3-5 April 2012 Oracle Düsseldorf Click here   France  24-26 April 2012 Oracle Colombes Click here   Spain 08-10 May 2012  Oracle Madrid  Click here   Netherlands  22-24 May 2012  Oracle Amsterdam  Click here   United Kingdom  06-08 June 2012  Oracle Reading  Click here   Italy  19-21 June 2012  Oracle Cinisello Balsamo  Click here   Portugal  10-12 July 2012  Oracle Lisbon  Click here Skill requirements Attendees need to have the following skills as this is required by the product-set and to make sure they get the most out of the training: Basic knowledge in Java and JavaEE Understanding the Application Server concept Basic knowledge in older releases of WebLogic Server would be beneficial Member of WebLogic Partner Community for registration please vist http://www.oracle.com/partners/goto/wls-emea Hardware requirements Every participant works on his own notebook. The minimal hardware requirements are: 4Gb physical RAM (we will boot the image with 2Gb RAM)  dual core CPU 15 GB HD Software requirements Please install Oracle VM VirtualBox 4.1.8 Follow-up and certification  With the workshop registration you agree to the following next steps Follow-up training attend and pass the Oracle Application Grid Certified Implementation Specialist Registration For details and registration please visit Register Here Free WebLogic Certification (Free assessment voucher to become certified) For all WebLogic experts, we offer free vouchers worth $195 for the Oracle Application Grid Certified Implementation Specialist assessment. To demonstrate your WebLogic knowledge you first have to pass the free online assessment Oracle Application Grid PreSales Specialist. For free vouchers, please send an e-mail with the screenshot of your Oracle Application Grid PreSales certirficate to [email protected] including your Name, Company, E-mail and Country. Note: This offer is limited to partners from Europe Middle East and Africa. Partners from other countries please contact your Oracle partner manager. WebLogic Specialization To become specialized in Application Grid, please make sure that you access the: Application Grid Specialization Guide Application Grid Specialization Checklist If you have any questions please contact the Oracle Partner Business Center. Oracle WebLogic Server 12c Key New Capabilities Java EE 6 and Developer Productivity Simplified Deployment and Management with Virtualization Integrated Traffic Management Enhanced High Availability and Disaster Recovery Much Higher Performance For more information please visit: Presentation from the WebLogic 12c launch Technical Presentation from the WebLogic 12c launch WebLogic OTN Website WebLogic 12c Virtual Conference Environment WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea (OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Best regards, Jürgen Kress WebLogic Partner Adoption EMEA Tel. +49 89 1430 1479 E-Mail: [email protected]   Copyright © 2012, Oracle and/or its affiliates. All rights reserved. Contact PBC | Legal Notices and Terms of Use | Privacy Statement Oracle Corporation - Worldwide Headquarters, 500 Oracle Parkway, OPL - E-mail Services, Redwood Shores, CA 94065, United States Your privacy is important to us. You can login to your account to update your e-mail subscriptions or you can opt-out of all Oracle Marketing e-mails at any time. Please note that opting-out of Marketing communications does not affect your receipt of important business communications related to your current relationship with Oracle such as Security Updates, Event Registration notices, Account Management and Support/Service communications.

  Read the article

• Exadata?????????INSERT?UPDATE

  - by Liu Maclean(???)

  Hybrid Columnar Compression??????Exadata?????????????,??????????(advanced compression)??,Hybrid columnar compression (HCC) ???Exadata????????HCC???????????CU(compression unit?????),??CU??????????,?????????????????????????,???CU????block??????????????? ???????INSERT/UPDATE??,??????????????,????UPDATE/INSERT???HCC?????????????????? hybrid columnar compression???????????????(bulk initial load)??,??????(direct load)??ALTER TABLE MOVE, IMPDP???????(append INSERT),??HCC??????????????????????? ???????????????????,?????????CU????????? ??????????????HCC?????????????for OLTP?????? ????????: SQL*Plus: Release 11.2.0.2.0 Production on Wed Sep 12 06:14:53 2012 Copyright (c) 1982, 2010, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Production With the Partitioning, Automatic Storage Management, OLAP, Data Mining and Real Application Testing options SQL> grant dba to scott; Grant succeeded. SQL> conn scott/oracle Connected. SQL> SQL> create table hcc_maclean tablespace users compress for query high as select * from dba_objects; Table created. 1* select rowid,owner,object_name,dbms_rowid.rowid_block_number(rowid) from hcc_maclean where owner='MACLEAN' SQL> / ROWID OWNER OBJECT_NAME DBMS_ROWID.ROWID_BLOCK_NUMBER(ROWID) ------------------------------ ------------------------------ -------------------- ------------------------------------ AAAThuAAEAAAHTJAOI MACLEAN SALES 29897 AAAThuAAEAAAHTJAOJ MACLEAN MYCUSTOMERS 29897 AAAThuAAEAAAHTJAOK MACLEAN MYCUST_ARCHIVE 29897 AAAThuAAEAAAHTJAOL MACLEAN MYCUST_QUERY 29897 AAAThuAAEAAAHTJAOh MACLEAN COMPRESS_QUERY 29897 AAAThuAAEAAAHTJAOi MACLEAN UNCOMPRESS 29897 AAAThuAAEAAAHTJAOj MACLEAN CHAINED_ROWS 29897 AAAThuAAEAAAHTJAOk MACLEAN COMPRESS_QUERY1 29897 8 rows selected. select dbms_rowid.rowid_block_number(rowid),dbms_rowid.rowid_relative_fno(rowid) from hcc_maclean where owner='MACLEAN'; session A: update hcc_maclean set OBJECT_NAME=OBJECT_NAME||'DBM' where rowid='AAAThuAAEAAAHTJAOI'; session B: update hcc_maclean set OBJECT_NAME=OBJECT_NAME||'DBM' where rowid='AAAThuAAEAAAHTJAOJ'; SQL> select sid,wait_event_text,BLOCKER_SID from v$wait_chains; SID WAIT_EVENT_TEXT BLOCKER_SID ---------- ---------------------------------------------------------------- ----------- 13 enq: TX - row lock contention 136 136 SQL*Net message from client ????session A block B,????HCC???update row??CU?????CU?????? SQL> alter system checkpoint; System altered. SQL> / System altered. SQL> alter system dump datafile 4 block 29897 2 ; Block header dump: 0x010074c9 Object id on Block? Y seg/obj: 0x1386e csc: 0x00.1cad7e itc: 3 flg: E typ: 1 - DATA brn: 0 bdba: 0x10074c8 ver: 0x01 opc: 0 inc: 0 exflg: 0 Itl Xid Uba Flag Lck Scn/Fsc 0x01 0xffff.000.00000000 0x00000000.0000.00 C--- 0 scn 0x0000.001cabfa 0x02 0x000a.00a.00000430 0x00c051a7.0169.17 ---- 1 fsc 0x0000.00000000 0x03 0x0000.000.00000000 0x00000000.0000.00 ---- 0 fsc 0x0000.00000000 avsp=0x14 tosp=0x14 r0_9ir2=0x0 mec_kdbh9ir2=0x0 76543210 shcf_kdbh9ir2=---------- 76543210 flag_9ir2=--R----- Archive compression: Y fcls_9ir2[0]={ } 0x16:pti[0] nrow=1 offs=0 0x1a:pri[0] offs=0x30 block_row_dump: tab 0, row 0, @0x30 tl: 8016 fb: --H-F--N lb: 0x2 cc: 1 ==>??CU??ITL 0x02 nrid: 0x010074ca.0 col 0: [8004] Compression level: 02 (Query High) Length of CU row: 8004 kdzhrh: ------PC CBLK: 1 Start Slot: 00 NUMP: 01 PNUM: 00 POFF: 7984 PRID: 0x010074ca.0 CU header: CU version: 0 CU magic number: 0x4b445a30 CU checksum: 0xf8faf86e CU total length: 8694 CU flags: NC-U-CRD-OP ncols: 15 nrows: 995 algo: 0 CU decomp length: 8487 len/value length: 100111 row pieces per row: 1 num deleted rows: 1 deleted rows: 904, START_CU: ????????????row?????: SQL> select DBMS_COMPRESSION.GET_COMPRESSION_TYPE('SCOTT','HCC_MACLEAN','AAAThuAAEAAAHTJAOk') from dual; DBMS_COMPRESSION.GET_COMPRESSION_TYPE('SCOTT','HCC_MACLEAN','AAATHUAAEAAAHTJAOK' -------------------------------------------------------------------------------- 4 COMP_NOCOMPRESS CONSTANT NUMBER := 1;COMP_FOR_OLTP CONSTANT NUMBER := 2;COMP_FOR_QUERY_HIGH CONSTANT NUMBER := 4;COMP_FOR_QUERY_LOW CONSTANT NUMBER := 8;COMP_FOR_ARCHIVE_HIGH CONSTANT NUMBER := 16;COMP_FOR_ARCHIVE_LOW CONSTANT NUMBER := 32; COMP_RATIO_MINROWS CONSTANT NUMBER := 1000000;COMP_RATIO_ALLROWS CONSTANT NUMBER := -1; ?????????????,??COMP_FOR_QUERY_HIGH?4,COMP_FOR_QUERY_LOW ?8 ?????????GET_COMPRESSION_TYPE??rowid????????4?????COMP_FOR_QUERY_HIGH????: SQL> update hcc_maclean set OBJECT_NAME=OBJECT_NAME||'DBM' where owner='MACLEAN'; 8 rows updated. SQL> commit; Commit complete. SQL> select DBMS_COMPRESSION.GET_COMPRESSION_TYPE('SCOTT','HCC_MACLEAN',rowid) from HCC_MACLEAN where owner='MACLEAN'; DBMS_COMPRESSION.GET_COMPRESSION_TYPE('SCOTT','HCC_MACLEAN',ROWID) ------------------------------------------------------------------ 1 1 1 1 1 1 1 1 8 rows selected. ??????????????COMPRESSION_TYPE?COMP_FOR_QUERY_HIGH???COMP_NOCOMPRESS,????????compress for query high????????????????? ?11g????????????????????HCC??????????? ALTER TABLE MOVE???????????????????HCC??? SQL> ALTER TABLE hcc_MACLEAN move COMPRESS FOR ARCHIVE HIGH; Table altered. SQL> select DBMS_COMPRESSION.GET_COMPRESSION_TYPE('SCOTT','HCC_MACLEAN',rowid) from HCC_MACLEAN where owner='MACLEAN'; DBMS_COMPRESSION.GET_COMPRESSION_TYPE('SCOTT','HCC_MACLEAN',ROWID) ------------------------------------------------------------------ 16 16 16 16 16 16 16 16 8 rows selected.

  Read the article

• Mounting ddrescue image after recovery (in over my head)

  - by BorgDomination

  I'm having problems mounting the recovery image. I've tried to mount the image multiple ways. quark@DS9 ~ $ sudo mount -t ext4 /media/jump1/1recover/sdb1.img /mnt mount: wrong fs type, bad option, bad superblock on /dev/loop0, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so quark@DS9 ~ $ sudo mount -r -o loop /media/jump1/1recover/sdb1.img recover mount: you must specify the filesystem type quark@DS9 ~ $ sudo mount /media/jump1/1recover/sdb1.img mnt mount: you must specify the filesystem type It doesn't even give me detailed information on the file I just made, nautilus says it's 160gb. quark@DS9 ~ $ file /media/jump1/1recover/sdb1.img /media/jump1/1recover/sdb1.img: data quark@DS9 ~ $ mmls /media/jump1/1recover/sdb1.img Cannot determine partition type I'm not sure what I'm doing wrong or if I started this process incorrectly from the beginning. I've outlined what I've done so far below. I'm clueless, I'd appreciate if someone had some input for me. What I have done from the beginning My laptop has two hard drives. One has the dual boot Win7 / Linux Mint system files. Secondary one contained my /home folder. The laptop was jarred and the /home disk was broken. I tried a LiveCD recovery, it failed. Wouldn't even load a Live session with the disk installed. So I turned to ddrescue. quark@DS9 ~ $ sudo fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0009fc18 Device Boot Start End Blocks Id System /dev/sda1 * 2048 112642047 56320000 7 HPFS/NTFS/exFAT /dev/sda2 138033152 312580095 87273472 83 Linux /dev/sda3 112644094 138033151 12694529 5 Extended /dev/sda5 112644096 132173823 9764864 83 Linux /dev/sda6 132175872 138033151 2928640 82 Linux swap / Solaris Partition table entries are not in disk order Disk /dev/sdb: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0002a8ea Device Boot Start End Blocks Id System /dev/sdb1 * 63 312576704 156288321 83 Linux Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xed6d054b Device Boot Start End Blocks Id System /dev/sdc1 63 1953520064 976760001 7 HPFS/NTFS/exFAT sda - 160g internal, holds all system files and all computer functions. sdb - 160g internal, BROKEN, contains about 140g of data I'd like to recover. sdc - 1T external, contains recovery image. Only place that has space to do all this. From this site, https://apps.education.ucsb.edu/wiki/Ddrescue I used this script to create an image of the broken hard drive. I changed the destination to the external USB drive. #!/bin/sh prt=sdb1 src=/dev/$prt dst=/media/jump1/1recover/$prt.img log=$dst.log sudo time ddrescue --no-split $src $dst $log sudo time ddrescue --direct --max-retries=3 $src $dst $log sudo time ddrescue --direct --retrim --max-retries=3 $src $dst $log Everything looked like it came off without a hitch: quark@DS9 ~ $ sudo bash recover1 Press Ctrl-C to interrupt Initial status (read from logfile) rescued: 0 B, errsize: 0 B, errors: 0 Current status rescued: 160039 MB, errsize: 4096 B, current rate: 35588 B/s ipos: 3584 B, errors: 1, average rate: 22859 kB/s opos: 3584 B, time from last successful read: 0 s Finished 12.78user 1060.42system 1:56:41elapsed 15%CPU (0avgtext+0avgdata 4944maxresident)k 312580958inputs+0outputs (1major+601minor)pagefaults 0swaps Press Ctrl-C to interrupt Initial status (read from logfile) rescued: 160039 MB, errsize: 4096 B, errors: 1 Current status rescued: 160039 MB, errsize: 1024 B, current rate: 0 B/s ipos: 1536 B, errors: 1, average rate: 13 B/s opos: 1536 B, time from last successful read: 1.3 m Finished 0.00user 0.00system 3:43.95elapsed 0%CPU (0avgtext+0avgdata 4944maxresident)k 238inputs+0outputs (3major+374minor)pagefaults 0swaps Press Ctrl-C to interrupt Initial status (read from logfile) rescued: 160039 MB, errsize: 1024 B, errors: 1 Current status rescued: 160039 MB, errsize: 1024 B, current rate: 0 B/s ipos: 1536 B, errors: 1, average rate: 0 B/s opos: 1536 B, time from last successful read: 3.7 m Finished 0.00user 0.00system 3:43.56elapsed 0%CPU (0avgtext+0avgdata 4944maxresident)k 8inputs+0outputs (0major+376minor)pagefaults 0swaps It looks like, from where I'm standing it worked perfectly. Here's the log: # Rescue Logfile. Created by GNU ddrescue version 1.14 # Command line: ddrescue --direct --retrim --max-retries=3 /dev/sdb1 /media/jump1/1recover/sdb1.img /media/jump1/1recover/sdb1.img.log # current_pos current_status 0x00000600 + # pos size status 0x00000000 0x00000400 + 0x00000400 0x00000400 - 0x00000800 0x254314FC00 + I'm not sure how to proceed. Does this mean all of my data is lost???????? Appreciate ANY input!

  Read the article

• Windows Phone 8 Launch Event Summary

  - by Tim Murphy

  Today was the official coming out party for Windows Phone 8.  Below is a summary of the launch event.  There is a lot here to stay with me. They started with a commercial staring Joe Belfiore show how his Windows Phone 8 was personal too him which highlights something I think Microsoft has done well over the last couple of event: spotlight how Windows Phone is a different experience from other smartphones.  Joe actually called iPhone and Android “tired old metaphors" and explained that the idea around Windows Phone was to “reinvent the smartphone around you” as “the most personal smartphone operating system”.  The is the message that they need to drive home in their adds. The only real technical aspect we found out was that they have optimized the operating system around the dual core Qualcomm Snapdragon chip set.  It seems like all of the other hardware goodies had already been announced.  The remainder of the event was centered around new features of the OS and app announcements. So what are we getting?  The integrated features included lock screen live tile, Data Sense, Rooms and Kids corner.  There wasn’t a lot of information about it, but Joe also talked about apps not just having live tiles, but being live apps that could integrate with wallet and the hub. The lock screen will now be able to be personalized with live tile data or even a photo slide show.  This gives the lock screen an even better ability to give you the information you want to know before you even unlock the phone. The Kids Corner allows you as a parent to setup an area on your phone that you kids can go into an use it without disturbing your apps.  They can play games or use apps that you have designated and will only see those apps.  It even has a special lock screen gesture just for the kids corner. Rooms allow you to organize your phone around the groups of people in your life.  You get a shared calendar, a room wall as well as shared notes beyond just being able to send messages to a group.  You can also invite people not on the Windows Phone platform to access an online version of the room. Data Sense is a new feature that gives you better control and understanding of your data plan usage.  You can see which applications are using data and it can automatically adjust they way your phone behaves as you get close to your data limit. Add to these features the fact that the entire Windows ecosystem is integrated with SkyDrive and you have an available anywhere experience that is unequaled by any other platform.  Your document, photos and music are available on your Windows Phone, Window 8 device and Xbox.  SkyDrive also doesn’t limit how long you can keep files like the competing cloud platforms and give more free storage. It was interesting the way they made the launch event more personal.  First Joe brought out his own kids to demo the Kids Corner.  They followed this up by bringing out Jessica Alba to discuss her experience on the Windows Phone 8.  They need to keep putting a face on the product instead of just showing features as a cold list. Then we get to apps.  We knew that the new Skype was coming, but we found out that it was created in such a way that it can receive calls without running consistently in the background which would eat up battery.  This announcement was follow by the coming Facebook app that is optimized for Windows Phone 8.  As a matter of fact they indicated that just after launch the marketplace would have 46 out of the top 50 apps used by all smartphone platforms.  In a rational world this tide with over 120,000 apps currently in the marketplace there should be no more argument about the Windows Phone ecosystem. For those of us who develop for Windows Phone and weren’t on the early adoption program will finally get access to the SDK tomorrow after an announcement at Build (more waiting).  Perhaps we will get a few new features then. In the end I wouldn’t say there were any huge surprises, but I am really excited about getting my hands on the devices next month and starting to develop.  Stay tuned. del.icio.us Tags: Windows Phone,Windows Phone 8,Winodws Phone 8 Launch,Joe Belfiore,Jessica Alba

  Read the article

• Multi Monitor Setup Problems

  - by Shamballa

  I have Ubuntu 10.04 LTS - the Lucid Lynx. I have until recently been using a nVida Graphics card (NVIDIA GeForce 9800 GT) with two monitors attached, this all worked fine and dandy. A couple of days ago I bought two new identical LCD monitors for a multi monitor setup and two ATI graphics cards (ATI Sapphire Radeon HD5450). NOTE *All monitors work fine in Windows XP, 2k, Vista and 7 After I had booted into Ubuntu only one display came on, that I kind of expected anyway, then I removed the driver for the nVidia card and downloaded the ATI version which gave me the ATI Catalyst Control Center - in that only two of the displays were showing the third was disabled and showing unknown driver. I enabled the third monitor that stated "Unkown Driver" and had to reboot, upon reboot none of the displays work. I restarted and booted up into recovery mode and from now that is only what I can get into using a failsafe driver. It seems according to the log that a server is already active for Display 0 and I have to remove /tmp/.X0-lock and start again. This is what the log file is saying: Fatal Server Error Server is already active for display 0 if this server is no longer running, remove /tmp/.X0-lock and start again. (WW) xf86 closeconsole: KDSETMODE failed: Bad file descriptor (WW) xf86 closeconsole: VT_GETMODE failed: Bad file descriptor (WW) xf86 closeconsole: VT_GETSTATE failed: Bad file descriptor ddxSigGiveUp: closing log I have tried looking at my xorg.config file but unfortunately I have not really got a clue as to how it "should" be - I have tried regenerating it using this command from a terminal: sudo dpkg-reconfigure -phigh xserver-xorg but that had no effect so I am currently stuck in failsafe driver mode but two monitors are active but are mirroring each other. I hope that this is not to long - looking back I have been going on a bit! but I am just trying to explain as much as I can... I have asked this on Linuxquestions but nobody seems to know either or at least I have not had any responses. Could some kind soul please help explain what I can do from here? I would be eternally grateful. Chris * Update * Removing xorg.conf does nothing other than allowing me to use only two monitors - using the command: sudo aticonfig --initial generates the xorg.conf file below: but does not work either - I just get two monitors... Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 EndSection Section "Files" EndSection Section "Module" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection I have tried using this command from a thread on the Ubuntu Forums with a question similar to mine: sudo aticonfig --initial=dual-head --adapter=all Generated xorg.conf file Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 Screen "aticonfig-Screen[0]-1" RightOf "aticonfig-Screen[0]-0" Screen "aticonfig-Screen[1]-0" RightOf "aticonfig-Screen[0]-1" Screen "aticonfig-Screen[1]-1" RightOf "aticonfig-Screen[1]-0" EndSection Section "Files" EndSection Section "Module" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "aticonfig-Monitor[1]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "aticonfig-Monitor[1]-1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "aticonfig-Device[0]-1" Driver "fglrx" BusID "PCI:1:0:0" Screen 1 EndSection Section "Device" Identifier "aticonfig-Device[1]-0" Driver "fglrx" BusID "PCI:2:0:0" EndSection Section "Device" Identifier "aticonfig-Device[1]-1" Driver "fglrx" BusID "PCI:2:0:0" Screen 1 EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[0]-1" Device "aticonfig-Device[0]-1" Monitor "aticonfig-Monitor[0]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[1]-0" Device "aticonfig-Device[1]-0" Monitor "aticonfig-Monitor[1]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[1]-1" Device "aticonfig-Device[1]-1" Monitor "aticonfig-Monitor[1]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection This upon reboot renders ALL monitors blank and I have to go into recovery mode and use a failsafe driver. This is so much harder than I thought it would be, I don't think Ubuntu likes ATI for multi (3) monitors or maybe the other way around. Can anyone help still?

  Read the article

• How to set child unordered list position?

  - by Joel

  Hi folks. I have a nav bar with children unordered lists nested under the main navbar items. My problem is on the inner list, when I position absolute, the inner list is centered to the page, and when I position relative, it is positioning inline with the parent list. I'm trying to get the first child item to line up directly under it's parent. /* OUTER LIST STYLING */ div#navbar2 { position:relative; width: 100%; border-top: solid #000 1px; border-bottom: solid #546F8B 1px; background-color: #546F8B; } div#navbar2 ul#navbar { padding: 0; margin: 10px 0; font-family: Arial, Helvetica, sans-serif; font-size: 16px; letter-spacing:1px; color: #FFF; white-space: nowrap; } div#navbar2 ul#navbar li { margin: 0 2px; list-style-type: none; display: inline; } div#navbar2 li a { text-decoration: none; color: #fff; padding: 10px 10px; } div#navbar2 li a:link { color: #FFF: } div#navbar2 li a:visited { color: #ffffff; } div#navbar2 li a:hover { color: #000; background-color: #FDFFC9; } /* INNER LIST STYLING */ div#navbar2 ul#navbar li ul.innerlist{ display: none; color:#000; } div#navbar2 ul#navbar li ul.innerlist li{ color:#000; } div#navbar2 ul#navbar li:hover ul.innerlist { position: absolute; display: inline; left: 0; width: 100%; margin: 40px 0 0px 0px; padding: 0px; color:#000; } div#navbar2 li.innerlist a { text-decoration: none; color: #000; padding: 10px 10px; } div#navbar2 li.innerlist a:link { color: #000: } div#navbar2 li.innerlist a:visited { color: #000; } div#navbar2 li.innerlist a:hover { color: #000; background-color: #FDFFC9; } And my html: <div id="navbar2"> <ul id="navbar"> <li id="index"><a href="index.php">About Rattletree</a></li> <li id="upcomingshows"><a href="upcomingshows.php">Calendar</a></li> <li id="booking"><a href="booking.php">Contact</a> <ul class="innerlist"> <li class="innerlist"><a href="#">Booking</a></li> <li class="innerlist"><a href="#">press</a></li> </ul> </li> <li id="instruments"><a href="instruments.php">The Band</a> <ul class="innerlist"> <li class="innerlist"><a href="#">The Instruments</a></li> <li class="innerlist"><a href="#">The Players</a></li> </ul> </li> <li id="classes"><a href="classes.php">Sights &amp; Sounds</a> <ul class="innerlist"> <li class="innerlist"><a href="#">Listen</a></li> <li class="innerlist"><a href="#">photos</a></li> <li class="innerlist"><a href="#">video</a></li> </ul> </li> <li id"classes"><a href="classes.php">Workshops &amp; Classes</a></li> </ul> </div> Thanks for any help!

  Read the article

• Android: Strange out of memory issue

  - by Chrispix

  I am not sure where to start to explain this one. I have a list view with a couple image buttons on each row. When you click the list row, it launches a new activity. If you review some of my other posts, I have had to build my own tabs because of an issue w/ the camera layout. The activity that gets launched for result is a map. If I click on my button to launch the image preview (load an image off the sd card) the application returns from the activity back to the listview activity to the result handler to relaunch my new activity which is nothing more than an image widget. So here is the issue, the image preview on the list view is being done w/ the cursor & listadapter. This makes it pretty simple, but I am not sure how I can put a resized (i.e. smaller bit size not pixel) image as the src for the imgbutton on the fly. So I just resized the image that came off the phone camera. The issue is that I get an out of memory error when it tries to go back and re-launch the 2nd activity. ** My question : is there a way I can build the list adapter easily row by row, where I can resize on the fly (bit wise)? - this would be preferable as I also need to make some changes to the properties of the widgets/elements in each row as I am unable to select a row w/ touch screen b/c of focus issue. (I can use roller ball). ** I know I can do an out of band resize and save of my image, but that is not really what I want to do, but some sample code for that would be nice if that is your suggestion. As soon as I disabled the image on the listview it worked fine again. FYI : This is how I was doing it : String[] from = new String[] { DBHelper.KEY_BUSINESSNAME, DBHelper.KEY_ADDRESS, DBHelper.KEY_CITY, DBHelper.KEY_GPSLONG, DBHelper.KEY_GPSLAT, DBHelper.KEY_IMAGEFILENAME + ""}; to = new int[] { R.id.businessname, R.id.address, R.id.city, R.id.gpslong, R.id.gpslat, R.id.imagefilename }; notes = new SimpleCursorAdapter(this, R.layout.notes_row, c, from, to); setListAdapter(notes); Where R.id.imagefilename is a ButtonImage Here is my LogCat 01-25 05:05:49.877: ERROR/dalvikvm-heap(3896): 6291456-byte external allocation too large for this process. 01-25 05:05:49.877: ERROR/(3896): VM won't let us allocate 6291456 bytes 01-25 05:05:49.877: ERROR/AndroidRuntime(3896): Uncaught handler: thread main exiting due to uncaught exception 01-25 05:05:49.917: ERROR/AndroidRuntime(3896): java.lang.OutOfMemoryError: bitmap size exceeds VM budget 01-25 05:05:49.917: ERROR/AndroidRuntime(3896): at android.graphics.BitmapFactory.nativeDecodeStream(Native Method) 01-25 05:05:49.917: ERROR/AndroidRuntime(3896): at android.graphics.BitmapFactory.decodeStream(BitmapFactory.java:304) 01-25 05:05:49.917: ERROR/AndroidRuntime(3896): at android.graphics.BitmapFactory.decodeFile(BitmapFactory.java:149) 01-25 05:05:49.917: ERROR/AndroidRuntime(3896): at android.graphics.BitmapFactory.decodeFile(BitmapFactory.java:174) 01-25 05:05:49.917: ERROR/AndroidRuntime(3896): at android.graphics.drawable.Drawable.createFromPath(Drawable.java:729) 01-25 05:05:49.917: ERROR/AndroidRuntime(3896): at android.widget.ImageView.resolveUri(ImageView.java:484) 01-25 05:05:49.917: ERROR/AndroidRuntime(3896): at android.widget.ImageView.setImageURI(ImageView.java:281) 01-25 05:05:49.917: ERROR/AndroidRuntime(3896): at android.widget.SimpleCursorAdapter.setViewImage(SimpleCursorAdapter.java:183) 01-25 05:05:49.917: ERROR/AndroidRuntime(3896): at android.widget.SimpleCursorAdapter.bindView(SimpleCursorAdapter.java:129) 01-25 05:05:49.917: ERROR/AndroidRuntime(3896): at android.widget.CursorAdapter.getView(CursorAdapter.java:150) 01-25 05:05:49.917: ERROR/AndroidRuntime(3896): at android.widget.AbsListView.obtainView(AbsListView.java:1057) 01-25 05:05:49.917: ERROR/AndroidRuntime(3896): at android.widget.ListView.makeAndAddView(ListView.java:1616) 01-25 05:05:49.917: ERROR/AndroidRuntime(3896): at android.widget.ListView.fillSpecific(ListView.java:1177) 01-25 05:05:49.917: ERROR/AndroidRuntime(3896): at android.widget.ListView.layoutChildren(ListView.java:1454) 01-25 05:05:49.917: ERROR/AndroidRuntime(3896): at android.widget.AbsListView.onLayout(AbsListView.java:937) 01-25 05:05:49.917: ERROR/AndroidRuntime(3896): at android.view.View.layout(View.java:5611) 01-25 05:05:49.917: ERROR/AndroidRuntime(3896): at android.widget.LinearLayout.setChildFrame(LinearLayout.java:1119) 01-25 05:05:49.917: ERROR/AndroidRuntime(3896): at android.widget.LinearLayout.layoutHorizontal(LinearLayout.java:1108) 01-25 05:05:49.917: ERROR/AndroidRuntime(3896): at android.widget.LinearLayout.onLayout(LinearLayout.java:922) 01-25 05:05:49.917: ERROR/AndroidRuntime(3896): at android.view.View.layout(View.java:5611) 01-25 05:05:49.917: ERROR/AndroidRuntime(3896): at android.widget.FrameLayout.onLayout(FrameLayout.java:294) 01-25 05:05:49.917: ERROR/AndroidRuntime(3896): at android.view.View.layout(View.java:5611) 01-25 05:05:49.917: ERROR/AndroidRuntime(3896): at android.widget.LinearLayout.setChildFrame(LinearLayout.java:1119) 01-25 05:05:49.917: ERROR/AndroidRuntime(3896): at android.widget.LinearLayout.layoutVertical(LinearLayout.java:999) 01-25 05:05:49.917: ERROR/AndroidRuntime(3896): at android.widget.LinearLayout.onLayout(LinearLayout.java:920) 01-25 05:05:49.917: ERROR/AndroidRuntime(3896): at android.view.View.layout(View.java:5611) 01-25 05:05:49.917: ERROR/AndroidRuntime(3896): at android.widget.FrameLayout.onLayout(FrameLayout.java:294) 01-25 05:05:49.917: ERROR/AndroidRuntime(3896): at android.view.View.layout(View.java:5611) 01-25 05:05:49.917: ERROR/AndroidRuntime(3896): at android.view.ViewRoot.performTraversals(ViewRoot.java:771) 01-25 05:05:49.917: ERROR/AndroidRuntime(3896): at android.view.ViewRoot.handleMessage(ViewRoot.java:1103) 01-25 05:05:49.917: ERROR/AndroidRuntime(3896): at android.os.Handler.dispatchMessage(Handler.java:88) 01-25 05:05:49.917: ERROR/AndroidRuntime(3896): at android.os.Looper.loop(Looper.java:123) 01-25 05:05:49.917: ERROR/AndroidRuntime(3896): at android.app.ActivityThread.main(ActivityThread.java:3742) 01-25 05:05:49.917: ERROR/AndroidRuntime(3896): at java.lang.reflect.Method.invokeNative(Native Method) 01-25 05:05:49.917: ERROR/AndroidRuntime(3896): at java.lang.reflect.Method.invoke(Method.java:515) 01-25 05:05:49.917: ERROR/AndroidRuntime(3896): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:739) 01-25 05:05:49.917: ERROR/AndroidRuntime(3896): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:497) 01-25 05:05:49.917: ERROR/AndroidRuntime(3896): at dalvik.system.NativeStart.main(Native Method) 01-25 05:10:01.127: ERROR/AndroidRuntime(3943): ERROR: thread attach failed I also have a new error when displaying an image : 01-25 22:13:18.594: DEBUG/skia(4204): xxxxxxxxxxx jpeg error 20 Improper call to JPEG library in state %d 01-25 22:13:18.604: INFO/System.out(4204): resolveUri failed on bad bitmap uri: 01-25 22:13:18.694: ERROR/dalvikvm-heap(4204): 6291456-byte external allocation too large for this process. 01-25 22:13:18.694: ERROR/(4204): VM won't let us allocate 6291456 bytes 01-25 22:13:18.694: DEBUG/skia(4204): xxxxxxxxxxxxxxxxxxxx allocPixelRef failed

  Read the article

• navbar hover issue in ie7

  - by Joel

  I'm having a problem with a child list not hovering correctly in IE7. Other browsers and IE7 seem to work fine. Here is the site: http://rattletree.com/index_1.php If you hover over the nav bars you'll see the sub-list come into view. You can see that the arrow image is not below the navbar in IE7 only. html: <div id="navbar2"> <ul id="navbar"> <li id="index"><a href="index.php">About Rattletree</a></li> <li id="upcomingshows"><a href="upcomingshows.php">Calendar</a></li> <li id="booking"><a href="booking.php">Contact</a> <ul class="innerlist"> <li class="innerlist"><img class="arrowAdjust" src="images/curved_arrow.png"</img><a href="#">Booking Information</a></li> <li class="innerlist"><a href="#">Press</a></li> </ul> </li> <li id="instruments"><a href="instruments.php">The Band</a> <ul class="innerlist"> <li class="innerlist"><img class="arrowAdjust" src="images/curved_arrow.png"</img><a href="#">The Instruments</a></li> <li class="innerlist"><a href="#">The Players</a></li> </ul> </li> <li id="classes"><a href="classes.php">Sights &amp; Sounds</a> <ul class="innerlist"> <li class="innerlist"><img class="arrowAdjust" src="images/curved_arrow.png"</img><a href="#">Listen</a></li> <li class="innerlist"><a href="#">Photos</a></li> <li class="innerlist"><a href="#">Video</a></li> </ul> </li> <li id"classes"><a href="classes.php">Workshops &amp; Classes</a></li> </ul> </div> and css: /* OUTER LIST STYLING */ div#navbar2 { position:relative; width: 100%; border-top: solid #000 1px; border-bottom: solid #546F8B 1px; background-color: #546F8B; } div#navbar2 ul#navbar { padding: 0px; margin: 10px 0; font-family: Arial, Helvetica, sans-serif; font-size: 16px; letter-spacing:1px; color: #FFF; white-space: nowrap; display:block; } div#navbar2 ul#navbar li { position:relative; margin: 0px; padding:0px; list-style-type: none; display:inline; } div#navbar2 li a { text-decoration: none; color: #fff; margin:0; padding: 11px 12px; } div#navbar2 li a:link { color: #FFF: } div#navbar2 li a:visited { color: #ffffff; } div#navbar2 li a:hover { color: #000; background-color: #FDFFC9; } /* INNER LIST STYLING */ div#navbar2 ul#navbar li ul.innerlist{ display: none; color:#000; } div#navbar2 ul#navbar li ul.innerlist li{ color:#000; } div#navbar2 ul#navbar li:hover ul.innerlist { position: absolute; display: inline; left: 0; width: 100%; margin: 30px 0 0px 0px; padding: 0; color:#000; } div#navbar2 ul#navbar li.innerlist a { text-decoration: none; font-weight:bold; color: #000; padding: 10px 15px 20px 15px; margin:0; } div#navbar2 li.innerlist a:link { color: #000: } div#navbar2 li.innerlist a:visited { color: #000; } div#navbar2 ul#navbar li.innerlist a:hover { color: #e62d31; background-color:transparent; } img.arrowAdjust{ padding:0px 0 0 20px; margin:0; }

  Read the article

• navbar hover issue in ie8

  - by Joel

  I'm having a problem with a child list not hovering correctly in IE8. Other browsers and IE7 seem to work fine. Here is the site: http://rattletree.com/index_1.php If you hover over the nav bars you'll see the sub-list come into view. You can see that the arrow image is not below the navbar in IE8 only. html: <div id="navbar2"> <ul id="navbar"> <li id="index"><a href="index.php">About Rattletree</a></li> <li id="upcomingshows"><a href="upcomingshows.php">Calendar</a></li> <li id="booking"><a href="booking.php">Contact</a> <ul class="innerlist"> <li class="innerlist"><img class="arrowAdjust" src="images/curved_arrow.png"</img><a href="#">Booking Information</a></li> <li class="innerlist"><a href="#">Press</a></li> </ul> </li> <li id="instruments"><a href="instruments.php">The Band</a> <ul class="innerlist"> <li class="innerlist"><img class="arrowAdjust" src="images/curved_arrow.png"</img><a href="#">The Instruments</a></li> <li class="innerlist"><a href="#">The Players</a></li> </ul> </li> <li id="classes"><a href="classes.php">Sights &amp; Sounds</a> <ul class="innerlist"> <li class="innerlist"><img class="arrowAdjust" src="images/curved_arrow.png"</img><a href="#">Listen</a></li> <li class="innerlist"><a href="#">Photos</a></li> <li class="innerlist"><a href="#">Video</a></li> </ul> </li> <li id"classes"><a href="classes.php">Workshops &amp; Classes</a></li> </ul> </div> and css: /* OUTER LIST STYLING */ div#navbar2 { position:relative; width: 100%; border-top: solid #000 1px; border-bottom: solid #546F8B 1px; background-color: #546F8B; } div#navbar2 ul#navbar { padding: 0px; margin: 10px 0; font-family: Arial, Helvetica, sans-serif; font-size: 16px; letter-spacing:1px; color: #FFF; white-space: nowrap; display:block; } div#navbar2 ul#navbar li { position:relative; margin: 0px; padding:0px; list-style-type: none; display:inline; } div#navbar2 li a { text-decoration: none; color: #fff; margin:0; padding: 11px 12px; } div#navbar2 li a:link { color: #FFF: } div#navbar2 li a:visited { color: #ffffff; } div#navbar2 li a:hover { color: #000; background-color: #FDFFC9; } /* INNER LIST STYLING */ div#navbar2 ul#navbar li ul.innerlist{ display: none; color:#000; } div#navbar2 ul#navbar li ul.innerlist li{ color:#000; } div#navbar2 ul#navbar li:hover ul.innerlist { position: absolute; display: inline; left: 0; width: 100%; margin: 30px 0 0px 0px; padding: 0; color:#000; } div#navbar2 ul#navbar li.innerlist a { text-decoration: none; font-weight:bold; color: #000; padding: 10px 15px 20px 15px; margin:0; } div#navbar2 li.innerlist a:link { color: #000: } div#navbar2 li.innerlist a:visited { color: #000; } div#navbar2 ul#navbar li.innerlist a:hover { color: #e62d31; background-color:transparent; } img.arrowAdjust{ padding:0px 0 0 20px; margin:0; }

  Read the article

• Multiple routers, subnets, gateways etc

  - by allentown

  My current setup is: Cable modem dishes out 13 static IP's (/28), a GB switch is plugged into the cable modem, and has access to those 13 static IP's, I have about 6 "servers" in use right now. The cable modem is also a firewall, DHCP server, and 3 port 10/100 switch. I am using it as a firewall, but not currently as a DHCP server. I have plugged into the cable modem, two network cables, one which goes to the WAN port of a Linksys Dual Band Wireless 10/100/1000 router/switch. Into the linksys are a few workstations, a few printers, and some laptops connecting to wifi. I set the Linksys to use take static IP, and enabled DHCP for the workstations, printers, etc in 192.168.1.1/24. The network for the Linksys is mostly self contained, backups go to a SAN, on that network, it all happens through that switch, over GB. But I also get internet access from it as well via the cable modem using one static IP. This all works, however, I can not "see" the static IP machines when I am on the Linksys. I can get to them via ssh and other protocols, and if I want to from "outside", I open holes, like 80, 25, 587, 143, 22, etc. The second wire, from the cable modem/fireall/switch just uplinks to the managed GB switch. What are the pros and cons of this? I do not like giving up the static IP to the Linksys. I basically have a mixed network of public servers, and internal workstations. I want the public servers on public IP's because I do not want to mess with port forwarding and mappings. Is it correct also, that if someone breaches the Linksys wifi, they still would have a hard time getting to the static IP range, just by nature of the network topology? Today, just for a test, I toggled on the DHCP in the firewall/cable modem at 10.1.10.1/24 range, the Linksys is n the 192.168.1.100/24 range. At that point, all the static IP machines still had in and out access, but Linksys was unreachable. The cable modem only has 10/100 ports, so I will not plug anything but the network drop into it, which is 50Mb/10Mb. Which makes me think this could be less than ideal, as transfers from the workstation network to the server network will be bottlenecked at 100Mb when I have 1000Mb available. I may not need to solve that, if isolation is better though. I do not move a lot of data, if any, from Linsys network to server network, so for it to pretend to be remote is ok. Should I approach this any different? I could enable DHCP on the cable modem/firewall, it should still send out the statics to the GB switch, but will also be a DHCP in 10.1.10.1/24 range? I can then plug the Linksys into the GB switch, which is now picking up statics and the 10.1.10.1/24 ranges, tell the Linksys to use 10.1.10.5 or so. Now, do I disable DHCP on the Linksys, and the cable modem/firewall will pass through the statics and 10.0.10.1/24 ranges as well? Or, could I open a second DHCP pool on the Linksys? I guess doing so gives me network isolation again, but it is just the reverse of what I have now. But I get out of the bottleneck, not that the Linksys could ever really touch real GB speeds anyway, but the managed switch certainly can. This is all because 13 statics are not that many. Right now, 6 "servers", the Linksys, a managed switch, a few SSL certs, and I am running out. I do not want to waste a static IP on the managed GB switch, or the Linksys, unless it provides me some type of benefit. Final question, under my current setup, if I am on a workstation, sitting at 192.168.1.109, the Linksys, with GB, and I send a file over ssh to the static IP machine, is that literally leaving the internet, and coming back in, or does it stay local? To me it seems like: Workstation (192.168.1.109) -> Linksys DHCP -> Linksys Static IP -> Cable Modem -> Server ( and it hits the 10/100 ports on the cable modem, slowing me down. But does it round trip the network, leave and come back in, limiting me to the 50/10 internet speeds? *These are all made up numbers, I do not use default router IP's as I will one day add a VPN, and do not want collisions. I need some recommendations, do I want one big network, or two isolated ones. Printers these days need an IP, everything does, I can not get autoconf/bonjour to be reliable on most printers. but I am also not sure I want the "server" side of my operation to be polluted by the workstation side of my operation. Unless there is some magic subetting I have not learned yet, here is what I am thinking: Cable modem 10/100, has 13 static IP, publicly accessible -> Enable DHCP on the cable modem -> Cable modem plugs into managed switch -> Managed switch gets 10.1.10.1 ssh, telnet, https admin management address -> Managed switch sends static IP's to to servers -> Plug Linksys into managed switch, giving it 10.1.10.2 static internally in Linksys admin -> Linksys gets assigned 10.1.10.x as its DHCP sending range -> Local printers, workstations, iPhones etc, connect to this -> ( Do I enable DHCP or disable it on the Linksys, just define a non over lapping range, or create an entirely new DHCP at 10.1.50.0/24, I think I am back isolated again with that method too? ) Thank you for any suggestions. This is the first time I have had to deal with less than a /24, and most are larger than that, but it is just a drop to a cabinet. Otherwise, it's a router, a few repeaters, and soho stuff that is simple, with one IP. I know a few may suggest going all DHCP on the servers, and I may one day, just not now, there has been too much moving of gear for me to be interested in that, and I would want something in the Catalyst series to deal with that.

  Read the article

• W7 routing - traffic not going to default gateway

  - by Ian Macintosh

  I have a really strange Windows 7 IPv4 routing issue that I can't get to the bottom of. The summary of the issue is that the default gateway is set to 192.168.254.253, but that it is actually using a default gateway of 192.168.254.254. Here's a network diagram: .-,( ),-. .-( )-. .-----( internet )----.--------------------------. | '-( ).-' | | | '-.( ).-' | | v v v .------------. .------. .------. | 10mb Fibre | | ADSL | | ADSL | '------------' '------' '------' | | | | | | v v v .---------------------. .--------------------. .--------------------. | Juniper Box | | Draytek DSL Router | | Draytek DSL Router | |---------------------| |--------------------| |--------------------| | (public IP address) | | 172.16.0.x | | 172.16.0.x | '---------------------' '--------------------' '--------------------' | | | | | .-------------------' | v v v .-------------------------. .-----------------. | Draytek Dual WAN Router | | Untangle GW | |-------------------------| |-----------------| | 192.168.254.254 | | 192.168.254.253 | '-------------------------' '-----------------' | | | | | v v =================================== LAN =================================== | | | | v v .----------------. .----------------. | Windows 7 W/S | | Windows 7 W/S | |----------------| |----------------| | 192.168.254.38 | | 192.168.254.77 | '----------------' '----------------' This is a recently (a few weeks ago) converted fibre site with the original 2 DSL lines still attached and running. An Untangle (firewall) was installed with the fibre line. Here is the affected PC network configuration: C:\>ipconfig /allcompartments /all Windows IP Configuration ============================================================================== Network Information for Compartment 1 (ACTIVE) ============================================================================== Host Name . . . . . . . . . . . . : COMP36 Primary Dns Suffix . . . . . . . : XXXXXX.local Node Type . . . . . . . . . . . . : Broadcast IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : XXXXXX.local Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix . : XXXXXX.local Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller #2 Physical Address. . . . . . . . . : C8-9C-DC-33-F1-65 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::3925:86a5:7066:ab92%15(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.254.38(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 22 August 2012 10:20:32 Lease Expires . . . . . . . . . . : 30 August 2012 10:20:31 Default Gateway . . . . . . . . . : 192.168.254.253 DHCP Server . . . . . . . . . . . : 192.168.254.200 DHCPv6 IAID . . . . . . . . . . . : 315137244 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-4A-17-8D-10-78-D2-74-2F-8A DNS Servers . . . . . . . . . . . : 192.168.254.200 Primary WINS Server . . . . . . . : 192.168.254.200 NetBIOS over Tcpip. . . . . . . . : Enabled Tunnel adapter isatap.XXXXXX.local: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : XXXXXX.local Description . . . . . . . . . . . : Microsoft ISATAP Adapter Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter Teredo Tunneling Pseudo-Interface: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes The routing table: C:\>route print =========================================================================== Interface List 15...c8 9c dc 33 f1 65 ......Realtek PCIe GBE Family Controller #2 1...........................Software Loopback Interface 1 10...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 11...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.254.253 192.168.254.38 10 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.254.0 255.255.255.0 On-link 192.168.254.38 266 192.168.254.38 255.255.255.255 On-link 192.168.254.38 266 192.168.254.255 255.255.255.255 On-link 192.168.254.38 266 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.254.38 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.254.38 266 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 15 266 fe80::/64 On-link 15 266 fe80::3925:86a5:7066:ab92/128 On-link 1 306 ff00 ::/8 On-link 15 266 ff00::/8 On-link =========================================================================== Persistent Routes: None And the strange routing as demonstrated by tracert: C:\>tracert -d www.bbc.co.uk Tracing route to www.bbc.net.uk [212.58.246.95] over a maximum of 30 hops: 1 1 ms 1 ms <1 ms 192.168.254.254 2 1 ms 1 ms 1 ms 172.16.0.254 3 17 ms 18 ms 16 ms XXXXXXXXXXXXXXX 4 18 ms 19 ms 19 ms XXXXXXXXXXXXXXX 5 22 ms 22 ms 22 ms XXXXXXXXXXXXXXX 6 22 ms 21 ms 22 ms XXXXXXXXXXXXXXX 7 21 ms 21 ms 22 ms 217.41.169.109 8 30 ms 32 ms 57 ms 109.159.251.227 9 46 ms 39 ms 35 ms 109.159.251.137 10 27 ms 66 ms 30 ms 109.159.254.116 ^C However, when done from another Windows 7 workstation: C:\Users\administrator>ipconfig /allcompartments /all Windows IP Configuration ============================================================================== Network Information for Compartment 1 (ACTIVE) ============================================================================== Host Name . . . . . . . . . . . . : PABX-BACKUP Primary Dns Suffix . . . . . . . : XXXXXX.local Node Type . . . . . . . . . . . . : Broadcast IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : XXXXXX.local Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : XXXXXX.local Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller Physical Address. . . . . . . . . : 8C-89-A5-94-43-84 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::9479:1c11:6f9f:ae0b%11(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.254.77(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 15 August 2012 08:27:18 Lease Expires . . . . . . . . . . : 27 August 2012 08:27:31 Default Gateway . . . . . . . . . : 192.168.254.253 DHCP Server . . . . . . . . . . . : 192.168.254.200 DHCPv6 IAID . . . . . . . . . . . : 244091301 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-16-C2-79-BE-8C-89-A5-94-43-84 DNS Servers . . . . . . . . . . . : 192.168.254.200 Primary WINS Server . . . . . . . : 192.168.254.200 NetBIOS over Tcpip. . . . . . . . : Enabled Tunnel adapter isatap.XXXXXX.local: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : XXXXXX.local Description . . . . . . . . . . . : Microsoft ISATAP Adapter Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter Local Area Connection* 9: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft 6to4 Adapter Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter Teredo Tunneling Pseudo-Interface: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes C:\Users\administrator> And finally, doing a tracert from the 2nd workstation yields expected results: C:\Users\administrator>tracert -d www.bbc.co.uk Tracing route to www.bbc.net.uk [212.58.244.67] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms 192.168.254.253 2 1 ms 1 ms 1 ms 141.0.xxx.xxx 3 2 ms 2 ms 2 ms 141.0.xxx.xxx 4 7 ms 2 ms 2 ms 109.204.xxx.xxx 5 2 ms 2 ms 2 ms 95.177.0.7 6 3 ms 2 ms 2 ms 95.177.0.9 7 30 ms 2 ms 2 ms 95.177.0.2 8 2 ms 2 ms 2 ms 195.66.224.103 9 ^C As expected, it is routing via .253, and the 2nd hop is the inside interface of the Juniper NTU. I've not inspected the traffic yet. In particular, I was going to look for ICMP redirects, though why there would be an ICMP redirect at all is not really sensible? .254 used to be the default gateway before the fibre was installed. Any ideas? Doesn't make sense to me why there should be this routing issue :( The Draytek Dual WAN Router was rebooted, the PC was rebooted. The PC had the network disabled and then re-enabled. All the standard stuff when Windows looses the plot. Hopefully somebody recognises the symptoms! PS: Sorry for the long post, but I didn't want to leave something potentially relevant out. PPS: No iSCSI involved on/at this or any other workstation so Windows 7 routing traffic through the gateway for local addresses isn't the issue.

  Read the article

• How do I prevent TCP connection freezes over an OpenVPN network?

  - by Jason R

  New details added at the end of this question; it's possible that I'm zeroing in on the cause. I have a UDP OpenVPN-based VPN set up in tap mode (I need tap because I need the VPN to pass multicast packets, which doesn't seem to be possible with tun networks) with a handful of clients across the Internet. I've been experiencing frequent TCP connection freezes over the VPN. That is, I will establish a TCP connection (e.g. an SSH connection, but other protocols have similar issues), and at some point during the session, it seems that traffic will cease being transmitted over that TCP session. This seems to be related to points at which large data transfers occur, such as if I execute an ls command in an SSH session, or if I cat a long log file. Some Google searches turn up a number of answers like this previous one on Server Fault, indicating that the likely culprit is an MTU issue: that during periods of high traffic, the VPN is trying to send packets that get dropped somewhere in the pipes between the VPN endpoints. The above-linked answer suggests using the following OpenVPN configuration settings to mitigate the problem: fragment 1400 mssfix This should limit the MTU used on the VPN to 1400 bytes and fix the TCP maximum segment size to prevent the generation of any packets larger than that. This seems to mitigate the problem a bit, but I still frequently see the freezes. I've tried a number of sizes as arguments to the fragment directive: 1200, 1000, 576, all with similar results. I can't think of any strange network topology between the two ends that could trigger such a problem: the VPN server is running on a pfSense machine connected directly to the Internet, and my client is also connected directly to the Internet at another location. One other strange piece of the puzzle: if I run the tracepath utility, then that seems to band-aid the problem. A sample run looks like: [~]$ tracepath -n 192.168.100.91 1: 192.168.100.90 0.039ms pmtu 1500 1: 192.168.100.91 40.823ms reached 1: 192.168.100.91 19.846ms reached Resume: pmtu 1500 hops 1 back 64 The above run is between two clients on the VPN: I initiated the trace from 192.168.100.90 to the destination of 192.168.100.91. Both clients were configured with fragment 1200; mssfix; in an attempt to limit the MTU used on the link. The above results would seem to suggest that tracepath was able to detect a path MTU of 1500 bytes between the two clients. I would assume that it would be somewhat smaller due to the fragmentation settings specified in the OpenVPN configuration. I found that result somewhat strange. Even stranger, however: if I have a TCP connection in the stalled state (e.g. an SSH session with a directory listing that froze in the middle), then executing the tracepath command shown above causes the connection to start up again! I can't figure out any reasonable explanation for why this would be the case, but I feel like this might be pointing toward a solution to ultimately eradicate the problem. Does anyone have any recommendations for other things to try? Edit: I've come back and looked at this a bit further, and have found only more confounding information: I set the OpenVPN connection to fragment at 1400 bytes, as shown above. Then, I connected to the VPN from across the Internet and used Wireshark to look at the UDP packets that were sent to the VPN server while the stall occurred. None were greater than the specified 1400 byte count, so the fragmentation seems to be functioning properly. To verify that even a 1400-byte MTU would be sufficient, I pinged the VPN server using the following (Linux) command: ping <host> -s 1450 -M do This (I believe) sends a 1450-byte packet with fragmentation disabled (I at least verified that it didn't work if I set it to an obviously-too-large value like 1600 bytes). These seem to work just fine; I get replies back from the host with no issue. So, maybe this isn't an MTU issue at all. I'm just confused as to what else it might be! Edit 2: The rabbit hole just keeps getting deeper: I've now isolated the problem a bit more. It seems to be related to the exact OS that the VPN client uses. I have successfully duplicated the problem on at least three Ubuntu machines (versions 12.04 through 13.04). I can reliably duplicate an SSH connection freeze within a minute or so by just cat-ing a large log file. However, if I do the same test using a CentOS 6 machine as a client, then I don't see the problem! I've tested using the exact same OpenVPN client version as I was using on the Ubuntu machines. I can cat log files for hours without seeing the connection freeze. This seems to provide some insight as to the ultimate cause, but I'm just not sure what that insight is. I have examined the traffic over the VPN using Wireshark. I'm not a TCP expert, so I'm not sure what to make of the gory details, but the gist is that at some point, a UDP packet gets dropped due to the limited bandwidth of the Internet link, causing TCP retransmissions inside the VPN tunnel. On the CentOS client, these retransmissions occur properly and things move on happily. At some point with the Ubuntu clients, though, the remote end starts retransmitting the same TCP segment over and over (with the transmit delay increasing between each retransmission). The client sends what looks like a valid TCP ACK to each retransmission, but the remote end still continues to transmit the same TCP segment periodically. This extends ad infinitum and the connection stalls. My question here would be: Does anyone have any recommendations for how to troubleshoot and/or determine the root cause of the TCP issue? It's as if the remote end isn't accepting the ACK messages sent by the VPN client. One common difference between the CentOS node and the various Ubuntu releases is that Ubuntu has a much more recent Linux kernel version (from 3.2 in Ubuntu 12.04 to 3.8 in 13.04). A pointer to some new kernel bug maybe? I'm assuming that if that were so, then I wouldn't be the only one experiencing the problem; I don't think this seems like a particularly exotic setup.

  Read the article

• Windows 7 laptop with two active network connections will not perform DNS AAAA lookup under certain conditions

  - by Jeff Loughridge

  My laptop has two network interfaces. The Ethernet interface connects directly to my provider's edge router. It obtains an IPv6 address via SLAAC. I manually set an IPv6 DNS server. The wireless interface connects to a CPE router that doesn't understand IPv6. If the wireless interface is disabled, I can reach the IPv6 Internet with no problems using the Ethernet interface. I run into problems when both interfaces are enabled and the wireless interface get its IPv4 DNS server via DHCP. Let's look at two scenarios. Wireless interface obtains IPv4 DNS server via DHCP - The CPE router (192.168.0.1) sends its address as the DNS server. In this scenario, Windows 7 will not perform AAAA lookups. The browser uses IPv4 transit to reach dual stack web sites. I can't reach IPv6-only web sites using domain names. I can reach IPv6-enabled web sites using IPv6 literals instead of the domain name. Wireless interface is manually configured with OpenDNS DNS server - Windows 7 performs AAAA lookups using IPv6 transit (via the Ethernet). Everything works fine. My dual homed set-up is definitely not standard. Still, the behavior is very strange to me. A valid IPv6 interface exists in my Ethernet interface. Why won't Windows attempt AAAA lookups in scenario #1? I've included the output of ipconfig /all and netstat -rn. C:\Program Files\Console>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : jake Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : res.openband.net Wireless LAN adapter Wireless Network Connection 2: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter Physical Address. . . . . . . . . : C0-CB-38-06-54-F9 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : res.openband.net Description . . . . . . . . . . . : DW1520 Wireless-N WLAN Half-Mini Card Physical Address. . . . . . . . . : C0-CB-38-06-54-F9 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::fc39:9293:7d01:4a75%13(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.0.105(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : Wednesday, July 11, 2012 7:35:21 AM Lease Expires . . . . . . . . . . : Thursday, July 12, 2012 9:49:46 AM Default Gateway . . . . . . . . . : 192.168.0.1 DHCP Server . . . . . . . . . . . : 192.168.0.1 DHCPv6 IAID . . . . . . . . . . . : 364956472 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-80-F8-14-5C-26-0A-03-23-5C DNS Servers . . . . . . . . . . . : 208.67.222.222 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : res.openband.net Description . . . . . . . . . . . : Intel(R) 82577LM Gigabit Network Connection Physical Address. . . . . . . . . : 5C-26-0A-03-23-5C DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv6 Address. . . . . . . . . . . : 2607:2600:1:850:c0e9:211a:fd05:4e0b(Preferred) Temporary IPv6 Address. . . . . . : 2607:2600:1:850:3d29:1839:62db:c4c1(Preferred) Link-local IPv6 Address . . . . . : fe80::c0e9:211a:fd05:4e0b%12(Preferred) IPv4 Address. . . . . . . . . . . : 10.52.2.51(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.254.0 Lease Obtained. . . . . . . . . . : Monday, July 09, 2012 8:55:07 AM Lease Expires . . . . . . . . . . : Thursday, July 12, 2012 7:30:05 AM Default Gateway . . . . . . . . . : fe80::214:6aff:fe51:7f3f%12 10.52.2.1 DHCP Server . . . . . . . . . . . : 216.40.77.244 DNS Servers . . . . . . . . . . . : 2620:0:ccc::2 2620:0:ccd::2 216.40.77.126 216.40.77.244 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter VMware Network Adapter VMnet1: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet1 Physical Address. . . . . . . . . : 00-50-56-C0-00-01 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::4c61:495b:229e:281e%14(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.40.1(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 469782614 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-80-F8-14-5C-26-0A-03-23-5C DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter VMware Network Adapter VMnet8: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet8 Physical Address. . . . . . . . . : 00-50-56-C0-00-08 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::f996:61eb:8c00:45e6%15(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.17.1(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 486559830 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-80-F8-14-5C-26-0A-03-23-5C DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled C:\Program Files\Console>netstat -rn =========================================================================== Interface List 17...c0 cb 38 06 54 f9 ......Microsoft Virtual WiFi Miniport Adapter 13...c0 cb 38 06 54 f9 ......DW1520 Wireless-N WLAN Half-Mini Card 12...5c 26 0a 03 23 5c ......Intel(R) 82577LM Gigabit Network Connection 11...5c ac 4c f8 b8 55 ......Bluetooth Device (Personal Area Network) 14...00 50 56 c0 00 01 ......VMware Virtual Ethernet Adapter for VMnet1 15...00 50 56 c0 00 08 ......VMware Virtual Ethernet Adapter for VMnet8 1...........................Software Loopback Interface 1 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.52.2.1 10.52.2.51 10 0.0.0.0 0.0.0.0 192.168.0.1 192.168.0.105 100 10.52.2.0 255.255.254.0 On-link 10.52.2.51 261 10.52.2.51 255.255.255.255 On-link 10.52.2.51 261 10.52.3.255 255.255.255.255 On-link 10.52.2.51 261 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.0.0 255.255.255.0 On-link 192.168.0.105 306 192.168.0.105 255.255.255.255 On-link 192.168.0.105 306 192.168.0.255 255.255.255.255 On-link 192.168.0.105 306 192.168.17.0 255.255.255.0 On-link 192.168.17.1 276 192.168.17.1 255.255.255.255 On-link 192.168.17.1 276 192.168.17.255 255.255.255.255 On-link 192.168.17.1 276 192.168.40.0 255.255.255.0 On-link 192.168.40.1 276 192.168.40.1 255.255.255.255 On-link 192.168.40.1 276 192.168.40.255 255.255.255.255 On-link 192.168.40.1 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.52.2.51 261 224.0.0.0 240.0.0.0 On-link 192.168.0.105 306 224.0.0.0 240.0.0.0 On-link 192.168.40.1 276 224.0.0.0 240.0.0.0 On-link 192.168.17.1 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.52.2.51 261 255.255.255.255 255.255.255.255 On-link 192.168.0.105 306 255.255.255.255 255.255.255.255 On-link 192.168.40.1 276 255.255.255.255 255.255.255.255 On-link 192.168.17.1 276 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 12 261 ::/0 fe80::214:6aff:fe51:7f3f 1 306 ::1/128 On-link 12 13 2607:2600:1:850::/64 On-link 12 261 2607:2600:1:850:3d29:1839:62db:c4c1/128 On-link 12 261 2607:2600:1:850:c0e9:211a:fd05:4e0b/128 On-link 12 261 fe80::/64 On-link 13 281 fe80::/64 On-link 14 276 fe80::/64 On-link 15 276 fe80::/64 On-link 14 276 fe80::4c61:495b:229e:281e/128 On-link 12 261 fe80::c0e9:211a:fd05:4e0b/128 On-link 15 276 fe80::f996:61eb:8c00:45e6/128 On-link 13 281 fe80::fc39:9293:7d01:4a75/128 On-link 1 306 ff00::/8 On-link 12 261 ff00::/8 On-link 13 281 ff00::/8 On-link 14 276 ff00::/8 On-link 15 276 ff00::/8 On-link =========================================================================== Persistent Routes: None

  Read the article

• Postgres user drop

  - by Grasper

  I am trying to drop a user: drop user testUser; I want to force this to work in a simple manner (Not a million calls)... How can I do this easily? I get this output: ERROR: role "testUser" cannot be dropped because some objects depend on it DETAIL: access to table main.tap_db_version access to table main.user_instance access to table main.target_type access to table main.status_code access to table main.state_space_profile access to table main.service_subscription access to table main.service_instance access to table main.sa_ordnance_weapon_type access to table main.operation access to table main.mission_class access to table main.map_symbol access to table main.ada_weapon_type access to table main.active_process access to table main.acft_type_00_only access to table main.abp_create_params access to table main.exercise access to table main.decl access to table main.data_set access to table main.cancellation_notice access to table main.ato_family_tree access to table main.apportionment_cat_cd access to table main.abp access to table main.alert_settings access to table main.alert_log access to table main.airspace_usage_category access to schema main access to view testUser.top_priority access to view testUser.target_ssm_msn_count access to view testUser.target_air_msn_count access to view testUser.sortie_sum access to view testUser.ref_info access to view testUser.preview_rmk_count access to view testUser.preview_pgm_las_count access to view testUser.preview_pgm_desi_count access to view testUser.preview_objective_count access to view testUser.preview_gfriend_count access to view testUser.preview_escort_msn_req access to view testUser.preview_chaff_data access to view testUser.preview_airmove_seg access to view testUser.preview_aircraft_total access to view testUser.offload_total access to view testUser.objective_count access to view testUser.fuel_planned access to view testUser.ew_data access to view testUser.dual access to view testUser.current_base_inventory access to view testUser.cell_total access to view testUser.asgn_sortie_sum access to view testUser.appor_sorties_planned access to view testUser.airmove_seg access to view testUser.aircraft_total access to view testUser.abp access to table testUser.req_msn_task access to table testUser.req_task_source_req access to table testUser.req_ssm_msn access to table testUser.req_ssm_source access to table testUser.req_msn access to table testUser.req_msn_warnings access to table testUser.req_air_msn access to table testUser.req_src_header access to table testUser.req_msn_ids access to table testUser.req_msn_comment access to table testUser.req_c2_msn access to table testUser.req_c2_source access to table testUser.req_ada_msn access to table testUser.req_ada_vertex access to table testUser.weather_forecast access to table testUser.weather_coords access to table testUser.weather_area access to table testUser.weapon_option access to table testUser.wag_activity access to table testUser.unit_remark access to table testUser.unit_location_turn access to table testUser.unit_iff access to table testUser.unit_coordination access to table testUser.unit_code access to table testUser.trace_point access to table testUser.tasking_agency access to table testUser.task_unit access to table testUser.target_type access to table testUser.tap_db_version access to table testUser.status_code access to table testUser.state_space_threat access to table testUser.state_space_profile access to table testUser.state_space access to table testUser.ssm_mission access to table testUser.spins_section_id access to table testUser.spins_codes access to table testUser.spins access to table testUser.unit_location access to table testUser.ship_target_request access to table testUser.service_subscription access to table testUser.service_instance access to table testUser.sa_ordnance_weapon_type access to table testUser.runway access to table testUser.restricted_codes access to table testUser.response_entity access to table testUser.residual_mission access to table testUser.request_objective access to table testUser.request and 194 other objects (see server log for list)

  Read the article

• Very slow compile times on Visual Studio

  - by johnc

  We are getting very slow compile times, which can take upwards of 20+ minutes on dual core 2GHz, 2G Ram machines. A lot of this is due to the size of our solution which has grown to 70+ projects, as well as VSS which is a bottle neck in itself when you have a lot of files. (swapping out VSS is not an option unfortunately, so I don't want this to descend into a VSS bash) We are looking at combing projects (not nice, as we like the separation of concerns, but is a good opportunity to refactor away some dead wood). We are also looking at having multiple solutions to achieve greater separation of concerns and quicker compile times for each element of the application. This I can see will become a dll hell as we try to keep things in synch. I am interested to know how other teams have dealt with this scaling issue, what do you do when your code base reaches a critical mass that you are wasting half the day watching the status bar deliver compile messages UPDATE Apologies, I neglected to mention this is a C# solution. Thanks for all the cpp suggestions, but it's been a few years since I've had to worry about headers. At a distance I say I miss C++, but I'm not sure I want to go back EDIT: Nice suggestions that have helped so far (not saying there aren't other nice suggestions below, just what has helped) New 3GHz laptop - the power of lost utilization works wonders when whinging to management Disable Anti Virus during compile 'Disconnecting' from VSS (actually the network) during compile - I may get us to remove VS-VSS integration altogether and stick to using the VSS UI Still not rip-snorting through a compile, but every bit helps. Orion did mention in a comment that generics may have a play also. From my tests there does appear to be a minimal performance hit, but not high enough to sure - compile times can be inconsistent due to disc activity. Due to time limitations, my tests didn't include as many Generics, or as much code, as would appear in live system, so that may accumulate. I wouldn't avoid using generics where they are supposed to be used, just for compile time performance WORKAROUND We are testing the practice of building new areas of the application in new solutions, importing in the latest dlls as required, them integrating them into the larger solution when we are happy with them. We may also do them same to existing code by creating temporary solutions that just encapsulate the areas we need to work on, and throwing them away after reintegrating the code. We need to weigh up the time it will take to reintegrate this code against the time we gain by not having Rip Van Winkle like experiences with rapid recompiling during development.

  Read the article

• Postgres user/role drop

  - by Grasper

  I am trying to drop a user: drop user testUser; I want to force this to work in a simple manner (Not a million calls)... How can I do this easily? I get this output: ERROR: role "testUser" cannot be dropped because some objects depend on it DETAIL: access to table main.tap_db_version access to table main.user_instance access to table main.target_type access to table main.status_code access to table main.state_space_profile access to table main.service_subscription access to table main.service_instance access to table main.sa_ordnance_weapon_type access to table main.operation access to table main.mission_class access to table main.map_symbol access to table main.ada_weapon_type access to table main.active_process access to table main.acft_type_00_only access to table main.abp_create_params access to table main.exercise access to table main.decl access to table main.data_set access to table main.cancellation_notice access to table main.ato_family_tree access to table main.apportionment_cat_cd access to table main.abp access to table main.alert_settings access to table main.alert_log access to table main.airspace_usage_category access to schema main access to view testUser.top_priority access to view testUser.target_ssm_msn_count access to view testUser.target_air_msn_count access to view testUser.sortie_sum access to view testUser.ref_info access to view testUser.preview_rmk_count access to view testUser.preview_pgm_las_count access to view testUser.preview_pgm_desi_count access to view testUser.preview_objective_count access to view testUser.preview_gfriend_count access to view testUser.preview_escort_msn_req access to view testUser.preview_chaff_data access to view testUser.preview_airmove_seg access to view testUser.preview_aircraft_total access to view testUser.offload_total access to view testUser.objective_count access to view testUser.fuel_planned access to view testUser.ew_data access to view testUser.dual access to view testUser.current_base_inventory access to view testUser.cell_total access to view testUser.asgn_sortie_sum access to view testUser.appor_sorties_planned access to view testUser.airmove_seg access to view testUser.aircraft_total access to view testUser.abp access to table testUser.req_msn_task access to table testUser.req_task_source_req access to table testUser.req_ssm_msn access to table testUser.req_ssm_source access to table testUser.req_msn access to table testUser.req_msn_warnings access to table testUser.req_air_msn access to table testUser.req_src_header access to table testUser.req_msn_ids access to table testUser.req_msn_comment access to table testUser.req_c2_msn access to table testUser.req_c2_source access to table testUser.req_ada_msn access to table testUser.req_ada_vertex access to table testUser.weather_forecast access to table testUser.weather_coords access to table testUser.weather_area access to table testUser.weapon_option access to table testUser.wag_activity access to table testUser.unit_remark access to table testUser.unit_location_turn access to table testUser.unit_iff access to table testUser.unit_coordination access to table testUser.unit_code access to table testUser.trace_point access to table testUser.tasking_agency access to table testUser.task_unit access to table testUser.target_type access to table testUser.tap_db_version access to table testUser.status_code access to table testUser.state_space_threat access to table testUser.state_space_profile access to table testUser.state_space access to table testUser.ssm_mission access to table testUser.spins_section_id access to table testUser.spins_codes access to table testUser.spins access to table testUser.unit_location access to table testUser.ship_target_request access to table testUser.service_subscription access to table testUser.service_instance access to table testUser.sa_ordnance_weapon_type access to table testUser.runway access to table testUser.restricted_codes access to table testUser.response_entity access to table testUser.residual_mission access to table testUser.request_objective access to table testUser.request and 194 other objects (see server log for list)

  Read the article

• Fulltext search for django : Mysql not so bad ? (vs sphinx, xapian)

  - by Eric

  I am studying fulltext search engines for django. It must be simple to install, fast indexing, fast index update, not blocking while indexing, fast search. After reading many web pages, I put in short list : Mysql MYISAM fulltext, djapian/python-xapian, and django-sphinx I did not choose lucene because it seems complex, nor haystack as it has less features than djapian/django-sphinx (like fields weighting). Then I made some benchmarks, to do so, I collected many free books on the net to generate a database table with 1 485 000 records (id,title,body), each record is about 600 bytes long. From the database, I also generated a list of 100 000 existing words and shuffled them to create a search list. For the tests, I made 2 runs on my laptop (4Go RAM, Dual core 2.0Ghz): the first one, just after a server reboot to clear all caches, the second is done juste after in order to test how good are cached results. Here are the "home made" benchmark results : 1485000 records with Title (150 bytes) and body (450 bytes) Mysql 5.0.75/Ubuntu 9.04 Fulltext : ========================================================================== Full indexing : 7m14.146s 1 thread, 1000 searchs with single word randomly taken from database : First run : 0:01:11.553524 next run : 0:00:00.168508 Mysql 5.5.4 m3/Ubuntu 9.04 Fulltext : ========================================================================== Full indexing : 6m08.154s 1 thread, 1000 searchs with single word randomly taken from database : First run : 0:01:11.553524 next run : 0:00:00.168508 1 thread, 100000 searchs with single word randomly taken from database : First run : 9m09s next run : 5m38s 1 thread, 10000 random strings (random strings should not be found in database) : just after the 100000 search test : 0:00:15.007353 1 thread, boolean search : 1000 x (+word1 +word2) First run : 0:00:21.205404 next run : 0:00:00.145098 Djapian Fulltext : ========================================================================== Full indexing : 84m7.601s 1 thread, 1000 searchs with single word randomly taken from database with prefetch : First run : 0:02:28.085680 next run : 0:00:14.300236 python-xapian Fulltext : ========================================================================== 1 thread, 1000 searchs with single word randomly taken from database : First run : 0:01:26.402084 next run : 0:00:00.695092 django-sphinx Fulltext : ========================================================================== Full indexing : 1m25.957s 1 thread, 1000 searchs with single word randomly taken from database : First run : 0:01:30.073001 next run : 0:00:05.203294 1 thread, 100000 searchs with single word randomly taken from database : First run : 12m48s next run : 9m45s 1 thread, 10000 random strings (random strings should not be found in database) : just after the 100000 search test : 0:00:23.535319 1 thread, boolean search : 1000 x (word1 word2) First run : 0:00:20.856486 next run : 0:00:03.005416 As you can see, Mysql is not so bad at all for fulltext search. In addition, its query cache is very efficient. Mysql seems to me a good choice as there is nothing to install (I need just to write a small script to synchronize an Innodb production table to a MyISAM search table) and as I do not really need advanced search feature like stemming etc... Here is the question : What do you think about Mysql fulltext search engine vs sphinx and xapian ?

  Read the article

• OpenJPA + Tomcat JDBC Connection Pooling = stale data

  - by Julie MacNaught

  I am using the Tomcat JDBC Connection Pool with OpenJPA in a web application. The application does not see updated data. Specifically, another java application adds or removes records from the database, but the web application never sees these updates. This is quite a serious issue. I must be missing something basic. If I remove the Connection Pool from the implementation, the web application sees the updates. It's as if the web application's commits are never called on the Connection. Version info: Tomcat JDBC Connection Pool: org.apache.tomcat tomcat-jdbc 7.0.21 OpenJPA: org.apache.openjpa openjpa 2.0.1 Here is the code fragment that creates the DataSource (DataSourceHelper.findOrCreateDataSource method): PoolConfiguration props = new PoolProperties(); props.setUrl(URL); props.setDefaultAutoCommit(false); props.setDriverClassName(dd.getClass().getName()); props.setUsername(username); props.setPassword(pw); props.setJdbcInterceptors("org.apache.tomcat.jdbc.pool.interceptor.ConnectionState;"+ "org.apache.tomcat.jdbc.pool.interceptor.StatementFinalizer;"+ "org.apache.tomcat.jdbc.pool.interceptor.SlowQueryReportJmx;"+ "org.apache.tomcat.jdbc.pool.interceptor.ResetAbandonedTimer"); props.setLogAbandoned(true); props.setSuspectTimeout(120); props.setJmxEnabled(true); props.setInitialSize(2); props.setMaxActive(100); props.setTestOnBorrow(true); if (URL.toUpperCase().contains(DB2)) { props.setValidationQuery("VALUES (1)"); } else if (URL.toUpperCase().contains(MYSQL)) { props.setValidationQuery("SELECT 1"); props.setConnectionProperties("relaxAutoCommit=true"); } else if (URL.toUpperCase().contains(ORACLE)) { props.setValidationQuery("select 1 from dual"); } props.setValidationInterval(3000); dataSource = new DataSource(); dataSource.setPoolProperties(props); Here is the code that creates the EntityManagerFactory using the DataSource: //props contains the connection url, user name, and password DataSource dataSource = DataSourceHelper.findOrCreateDataSource("DATAMGT", URL, username, password); props.put("openjpa.ConnectionFactory", dataSource); emFactory = (OpenJPAEntityManagerFactory) Persistence.createEntityManagerFactory("DATAMGT", props); If I comment out the DataSource like so, then it works. Note that OpenJPA has enough information in the props to configure the connection without using the DataSource. //props contains the connection url, user name, and password //DataSource dataSource = DataSourceHelper.findOrCreateDataSource("DATAMGT", URL, username, password); //props.put("openjpa.ConnectionFactory", dataSource); emFactory = (OpenJPAEntityManagerFactory) Persistence.createEntityManagerFactory("DATAMGT", props); So somehow, the combination of OpenJPA and the Connection Pool is not working correctly.

  Read the article

< Previous Page | 138 139 140 141 142 143 144 145 146 147 148  | Next Page >