Search Results

Search found 12569 results on 503 pages for 'root plist'.

Page 142/503 | < Previous Page | 138 139 140 141 142 143 144 145 146 147 148 149  | Next Page >

• Yum Error Installing Git from kernel.org Repo

  - by Lance

  I want to install the latest version of Git using yum and the RPM repository on kernel.org, but adding the repo to yum.repos.d causes yum to fail with checksum errors. The prevailing solution to this issue seems to be to simply use the repository at Webtatic as answered here on superuser. I know I can also install an older version of Git using the EPEL repo, or compile from the latest source tarball, but honestly I want to understand why I'm having issues using the kernel.org repo. Here’s the workflow, after a clean install of CentOS 5.5 and "yum update": [root]# wget -P /etc/yum.repos.d/ http://kernel.org/pub/software/scm/git/RPMS/git.repo [root]# yum clean all [root]# yum repolist Loaded plugins: fastestmirror Determining fastest mirrors * addons: mirrors.netdna.com * base: mirror.clarkson.edu * epel: serverbeach1.fedoraproject.org * extras: centos.mirror.nac.net * updates: mirror.cogentco.com addons | 951 B 00:00 addons/primary | 202 B 00:00 base | 2.1 kB 00:00 base/primary_db | 1.6 MB 00:01 epel | 3.7 kB 00:00 epel/primary_db | 2.8 MB 00:01 extras | 2.1 kB 00:00 extras/primary_db | 188 kB 00:00 git | 1.2 kB 00:00 git/primary | 155 kB 00:00 http://www.kernel.org/pub/software/scm/git/RPMS/i386/repodata/primary.xml.gz: [Errno -3] Error performing checksum Trying other mirror. git/primary | 155 kB 00:00 http://www.kernel.org/pub/software/scm/git/RPMS/i386/repodata/primary.xml.gz: [Errno -3] Error performing checksum Trying other mirror. Error: failure: repodata/primary.xml.gz from git: [Errno 256] No more mirrors to try. Any suggestions as to a solution, or details why the kernel.org repo has this issue? (Sorry I can't include more links to my references, but I don't have the reputation for that yet.)

  Read the article

• Nginx: Serve static files out of a given directory - one level too deep

  - by Joe J

  I'm pretty new to nginx configs. I'm having some difficulty with a pretty basic problem. I'd like to host some static files at /doc (index.html, some images, etc). The files are located in a directory called /sites/mysite/proj/doc/. The problem is, is that with the nginx config below, nginx tries to look for a directory called "/sites/mysite/proj/doc/doc". Perhaps this can be fixed by setting the root to /sites/mysite/proj/, but I don't want to potentially expose other (non-static) assets in the proj/ directory. And for various reasons, I can't really move the doc/ directory from where it is. I think there is a way to use a Rewrite rule to solve this situation, but I don't really understand all the parts, so having some difficulty formulating the rule. rewrite ^/doc/(.*)$ /$1 permanent; I've also included a working example of hosting files out of a /sites/mysite/htdocs/static/ directory. > vim locations.conf location /static { root /sites/mysite/htdocs/; access_log off; autoindex on; } location /doc { root /sites/mysite/proj/doc/; access_log on; autoindex on; } 2011/11/19 23:49:00 [error] 2314#0: *42 open() "/sites/mysite/proj/doc/doc" failed (2: No such file or directory), client: 100.100.100.100, server: , request: "GET /doc HTTP/1.1", host: "myhost.com" Does anyone have any ideas how I might go about serving this static content? Any help is much appreciated. Thanks, Joe

  Read the article

• ProxyPass for specific vhost with mod_rewrite

  - by Steve Robbins

  I have a web server that it set up to dynamically server different document roots for different domains <VirtualHost *:80> <IfModule mod_rewrite.c> # Stage sites :: www.[document root].server.company.com => /home/www/[document root] RewriteCond %{HTTP_HOST} ^www\.[^.]+\.server\.company\.com$ RewriteRule ^(.+) %{HTTP_HOST}$1 [C] RewriteRule ^www\.([^.]+)\.server\.company\.com(.*) /home/www/$1/$2 [L] </IfModule> </VirtualHost> This makes it so that www.foo.server.company.com will serve the document root of server.company.com:/home/www/foo/ For one of these sites, I need to add a ProxyPass, but I only want it to be applied to that one site. I tried something like <VirtualHost *:80> <Directory /home/www/foo> UseCanonicalName Off ProxyPreserveHost On ProxyRequests Off ProxyPass /services http://www-test.foo.com/services ProxyPassReverse /services http://www-test.foo.com/services </Directory> </VirtualHost> But then I get these errors ProxyPreserveHost not allowed here ProxyPass|ProxyPassMatch can not have a path when defined in a location. How can I set up a ProxyPass for a single virtual host?

  Read the article

• nmap installation issue

  - by daasf

  vanilla centos with latest updates, installed gcc, and after ./configure:.... Configuration complete. Type make (or gmake on some *BSD machines) to compile. [root@winxp nmap-5.51]# make Makefile:375: makefile.dep: No such file or directory g++ -MM -I./liblua -I./libdnet-stripped/include -I./libpcre -I./libpcap -I./nbase - I./nsock/include -DHAVE_CONFIG_H -DNMAP_NAME=\"Nmap\" -DNMAP_URL=\"http://nmap.org\" - DNMAP_PLATFORM=\"x86_64-unknown-linux-gnu\" -DNMAPDATADIR=\"/usr/local/share/nmap\" - D_FORTIFY_SOURCE=2 main.cc nmap.cc targets.cc tcpip.cc nmap_error.cc utils.cc idle_scan.cc osscan.cc osscan2.cc output.cc payload.cc scan_engine.cc timing.cc charpool.cc services.cc protocols.cc nmap_rpc.cc portlist.cc NmapOps.cc TargetGroup.cc Target.cc FingerPrintResults.cc service_scan.cc NmapOutputTable.cc MACLookup.cc nmap_tty.cc nmap_dns.cc traceroute.cc portreasons.cc xml.cc nse_main.cc nse_utility.cc nse_nsock.cc nse_dnet.cc nse_fs.cc nse_nmaplib.cc nse_debug.cc nse_pcrelib.cc nse_binlib.cc nse_bit.cc > makefile.dep /bin/sh: g++: command not found make: *** [makefile.dep] Error 127 [root@winxp nmap-5.51]# yum install g++ -y Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * addons: mirror.ash.fastserv.com * base: centos.mirror.choopa.net * extras: mirror.trouble-free.net * updates: mirror.nexcess.net Setting up Install Process No package g++ available. Nothing to do [root@winxp nmap-5.51]#

  Read the article

• Does MySQL log successful or attempted queries?

  - by Nathan Long

  I'm trying to track down a hit-or-miss bug in a web application. Sometimes a request completes just fine; sometimes it hangs and never finishes. I see that Apache now has several requests listed on the server-status page as "sending reply," and that doesn't change. I'm testing on localhost, so there shouldn't ever be more than one. Out of curiosity, I set MySQL to log all queries and I'm tail -fing the log file. When things go OK, I see a pattern like this: 20 Connect root@localhost on dbname 20 Query (some query #1) 20 Query (some query #2) (etc) 20 Quit 21 Connect (etc) When it hangs, I see a pattern like this: 22 Connect root@localhost on dbname 22 Query (some query #1) //nothing happens, so I try the post again 23 Connect root@localhost on dbname 23 Query (some query #1) //nothing happens; try again 24 Connect (etc) Here's my question: is MySQL logging attempted queries, or successful queries? In other words, if the last line I see is query #1, does that imply that query #1 or query #2 is hanging? My guess is that the one I don't see is the problem, because the last one I see looks fine, but maybe the one I don't see is too screwed-up for MySQL to process. Thoughts?

  Read the article

• Can't get rsync over sftp to work

  - by Patrik

  I'm trying to set up a backup system from an Ubuntu server to a Synology NAS (DS413j) using rsync and sftp. I have created a user for this that we can call ubuntu-backup. I have a directory in ubuntu-backup home directory called www where the backup will be saved. I have enabled Network Backup in DSM The user ubuntu-backup has full access to it's home directory Here is my rsync config file on the Synology NAS: #motd file = /etc/rsyncd.motd #log file = /var/log/rsyncd.log pid file = /var/run/rsyncd.pid lock file = /var/run/rsync.lock use chroot = no [NetBackup] path = /var/services/NetBackup comment = Network Backup Share uid = root gid = root read only = no list = yes charset = utf-8 auth users = root secrets file = /etc/rsyncd.secrets [ubuntu-backup] path = /volume1/homes/ubuntu-backup/www comment = Ubuntu Backup uid = ubuntu-backup gid = users read only = false auth users = ubuntu-backup secrets file = /etc/rsyncd.secrets The permissions on /volume1/homes/ubuntu-backup/www is ubuntu-backup:users 777 Here is the command i'm running. rsync -aHvhiPb /var/www/ [email protected]:./ The result: sending incremental file list ERROR: module is read only rsync error: syntax or usage error (code 1) at main.c(1034) [Receiver=3.0.9] rsync: connection unexpectedly closed (9 bytes received so far) [sender] rsync error: error in rsync protocol data stream (code 12) at io.c(605) [sender=3.0.9] If I'm running this: rsync -aHvhiPb /var/www/ [email protected] It looks like its sending files. No errors. But I cant find anything on the NAS.

  Read the article

• Symbolic Links Between User Accounts

  - by Pez Cuckow

  I have been using a cron job to duplicate a folder into another users account every day and someone suggested using symbolic links instead although I cannot get them to work. In summary user GAMER generates log files that they want to access via HTTP, however I only have a web-server in the user account SERVER, in the past I would copy the logs folder from GAMERS account into SERVER/public_html/. and then chmod the files so the server could access them. Trying to use symbolic links I set up a link from root (as only root can access both accounts) I used: ln -s /home/GAMER/game/logs/ /home/SERVER/public_html/logs However it seems that only root can use this link, I tried chmoding the link, all the files in the gamers /game/logs/*, /game/logs itself to 777 as well as changing chown and chgrp to server the files still cannot be read. When viewed from servers account my shell shows the link and where it is to hi-lighted in black with red text. Am I doing something wrong? Please enlighten me! /home/GAMER/game/ (chmod & chgrp) drwxrwxrwx 3 SERVER SERVER 4096 2011-01-07 15:46 logs /home/SERVER/public_html (chmod -h & chgrp -h) lrwxrwxrwx 1 server server 41 2011-01-07 19:53 logs -> /home/GAMER/game/logs/

  Read the article

• nginx projects in subfolders

  - by Timothy

  I'm getting frustrated with my nginx configuration and so I'm asking for help in writing my config file to serve multiple projects from sub-directories in the same root. This isn't virtual hosting as they are all using the same host value. Perhaps an example will clarify my attempt: request 192.168.1.1/ should serve index.php from /var/www/public/ request 192.168.1.1/wiki/ should serve index.php from /var/www/wiki/public/ request 192.168.1.1/blog/ should serve index.php from /var/www/blog/public/ These projects are using PHP and use fastcgi. My current configuration is very minimal. server { listen 80 default; server_name localhost; access_log /var/log/nginx/localhost.access.log; root /var/www; index index.php index.html; location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /var/www$fastcgi_script_name; include fastcgi_params; } } I've tried various things with alias and rewrite but was not able to get things set correctly for fastcgi. It seems there should be a more eloquent way than writing location blocks and duplicating root, index, SCRIPT_FILENAME, etc. Any pointers to get me headed in the right direction are appreciated.

  Read the article

• PHP cannot connect to MySQL

  - by yogal

  Hello, I recently installed Apache 2 + PHP 5.3.1 + MySQL 5.1.44 on my Windows 7 64bit machine following this guide: http://sleeplessgeek.blogspot.com/2010/01/setting-up-apache-php-mysql-phpmyadmin.html It all went fine, php is working great (even with XDebug) but I cannot connect to mysql server. A simple script I wrote to test connection (yes, root has no pass): $username = "root"; $password = ""; $database = "test"; $hostname = "localhost"; $conn = mysql_connect($hostname, $username, $password) or die("Unable to connect to MySQL Database!!"); It prints this error after 60sec of timeout: Warning: mysql_connect() [function.mysql-connect]: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. I can connect to mysql using cmdmysql -h localhost -u root Services are working properly. There also seems to be a problem with PhpMyAdmin (using 3.2.5). As soon as I type user and pass the page loads and turns blank (content-lenght in headers is 0 but status code is 302 Found). Looks like something wrong with cookies (my auth method). I hope someone has a clue, it has to be something dumb simple I missed. Thanks in advance.

  Read the article

• linux command prompt ftp to ftp server running on windows

  - by Vass

  Hi, I am using on Windows Vista, Filezilla server. I have it set up to be accessed via outside IPs and when I use a client on the IP I have it connects normally using Filezilla client. On the same machine I have Ubuntu running in a virtual box and when using filezilla client in there it works fine. Now I want to try the command prompt. So I do the ftp xxx.xxx.xx.xx I enter the name and password and i get the ftp command prompt, but the commands are not working properly. when trying "ls" or "cd" these commands do not work. "cd" tells me that the current directory is "/" root, but this does not make sense in the windows operating system. Now the filezilla client is taking the user in the application window directly to the root folder of the permitted filespace granted to that user. How can the same be done from the command prompt, if there is a way? It is as if the command prompt takes me to the root which does not exist or even have correct permissions to move in. Is there any way to be taken to the correct directory directly, or move there especially when the slashes are the wrong way around etc? Best,

  Read the article

• Better logging for cronjob output using /usr/bin/logger

  - by Stefan Lasiewski

  I am looking for a better way to log cronjobs. Most cronjobs tend to spam email or the console, get ignored, or create yet another logfile. In this case, I have a Nagios NSCA script which sends data to a central Nagios sever. This send_nsca script also prints a single status line to STDOUT, indicating success or failure. 0 * * * * root /usr/local/nagios/sbin/nsca_check_disk This emails the following message to root@localhost, which is then forwarded to my team of sysadmins. Spam. forwarded nsca_check_disk: 1 data packet(s) sent to host successfully. I'm looking for a log method which: Doesn't spam the messages to email or the console Don't create yet another krufty logfile which requires cleanup months or years later. Capture the log information somewhere, so it can be viewed later if desired. Works on most unixes Fits into an existing log infrastructure. Uses common syslog conventions like 'facility' Some of these are third party scripts, and don't always do logging internally. UPDATE 2010-04-30 In the process of writing this question, I think I have answered myself. So I'll answer myself "Jeopardy-style". Is there any problem with this method? The following will send any Cron output to /usr/bin//logger, which will send to syslog, with a 'tag' of 'nsca_check_disk'. Syslog handles it from there. My systems (CentOS and FreeBSD) already handle log rotation. */5 * * * * root /usr/local/nagios/sbin/nsca_check_disk 2>&1 |/usr/bin/logger -t nsca_check_disk /var/log/messages now has one additional message which says this: Apr 29, 17:40:00 192.168.6.19 nsca_check_disk: 1 data packet(s) sent to host successfully. I like /usr/bin/logger , because it works well with an existing syslog configuration and infrastructure, and is included with most Unix distros. Most *nix distributions already do logrotation, and do it well.

  Read the article

• Why does redis report limit of 1024 files even after update to limits.conf?

  - by esilver

  I see this error at the top of my redis.log file: Current maximum open files is 1024. maxclients has been reduced to 4064 to compensate for low ulimit. I have followed these steps to the letter (and rebooted): Moreover, I see this when I run ulimit: ubuntu@ip-XX-XXX-XXX-XXX:~$ ulimit -n 65535 Is this error specious? If not, what other steps do I need to perform? I am running redis 2.8.13 (tip of the tree) on Ubuntu LTS 14.04.1 (again, tip of the tree). Here is the user info: ubuntu@ip-XX-XXX-XXX-XXX:~$ ps aux | grep redis root 1027 0.0 0.0 66328 2112 ? Ss 20:30 0:00 sudo -u ubuntu /usr/local/bin/redis-server /etc/redis/redis.conf ubuntu 1107 19.2 48.8 7629152 7531552 ? Sl 20:30 2:21 /usr/local/bin/redis-server *:6379 The server is therefore running as ubuntu. Here are my limits.conf file without comments: ubuntu@ip-XX-XXX-XXX-XXX:~$ cat /etc/security/limits.conf | sed '/^#/d;/^$/d' ubuntu soft nofile 65535 ubuntu hard nofile 65535 root soft nofile 65535 root hard nofile 65535 And here is the output of sysctl fs.file-max: ubuntu@ip-XX-XXX-XXX-XXX:~$ sysctl -a| grep fs.file-max sysctl: permission denied on key 'fs.protected_hardlinks' sysctl: permission denied on key 'fs.protected_symlinks' fs.file-max = 1528687 sysctl: permission denied on key 'kernel.cad_pid' sysctl: permission denied on key 'kernel.usermodehelper.bset' sysctl: permission denied on key 'kernel.usermodehelper.inheritable' sysctl: permission denied on key 'net.ipv4.tcp_fastopen_key' as sudo ubuntu@ip-10-102-154-226:~$ sudo sysctl -a| grep fs.file-max fs.file-max = 1528687 Also, I see this error at the top of the redis.log file, not sure if it's related. It makes sense that the ubuntu user isn't allowed to change max open files, but given the high ulimits I have tried to set he shouldn't need to: [1050] 23 Aug 21:00:43.572 # You requested maxclients of 10000 requiring at least 10032 max file descriptors. [1050] 23 Aug 21:00:43.572 # Redis can't set maximum open files to 10032 because of OS error: Operation not permitted.

  Read the article

• Mod_rewrite to eliminate query strings

  - by Greg Frommer

  Hi everyone, I have been working on this for a while but I'm not finding exactly what I am looking for. I am writing a webapp to let my users create and publish pieces of HTML content in a domain and URL folder structure of their choosing. All of the content and requested URL structures are stored in a database. I have all of the code in my index.php (in the root folder) to access the database content, and based on the server name (and hopefully folder structure) will pick out the proper content from the DB and display it to the end-users browser. So my situation looks like this: www.test.com/index.php?id=123234345 ... will display the proper page, but I want my users to be able to define a unique "page name" instead of using the numeric index (also I want to hide the /index.php part) so what I would like the end-user to see is: www.test.com/arbitrary-unique-keyword/keyword2/keyword3 which will invoke the index.php page in the root folder. Then I will use the PHP $_SERVER['PATH_INFO'] variable to match the requested folder structure up with the proper content in my database and display that. All the material I have found so far expects me to hard code parts of the folder structure into the rules.... but I think I want something simpler (perhaps). So the question in a nutshell: How do I use mod_rewrite to allow all "non-existent" folder paths be passed through to a main index.php residing in the root folder? (For all paths that DO exist, like for calls to images... I want those to succeed and not be directed to the index.php obviously) Thanks everyone, please let me know if I can clear anything up.

  Read the article

• Nginx and Gunicorn hanging on GET requests

  - by whatWhat

  I'm using Nginx + Gunicorn which is serving my Django project. All GET requests hang for ~1 min. The content seems to be available immediately as I can see it in the Browser inspector but the browser itself looks like it's still waiting for more data. Heres my Ngnix config #allow for up to 3 connections per second. limit_req_zone $binary_remote_addr zone=one:10m rate=3r/s; server { listen 80; server_name example.com; root /var/www/example.com/example/; # serve directly - analogous for static/staticfiles location /media/ { # this changes depending on your python version root /home/example/; } location /static/ { # if asset versioning is used if ($query_string) { expires max; } root /var/www/example.com; } location / { #Allow for a burst of 50. limit_req zone=one burst=50 nodelay; proxy_pass_header Server; proxy_set_header Host $http_host; proxy_redirect off; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Scheme $scheme; proxy_connect_timeout 10; proxy_read_timeout 10; proxy_pass http://localhost:8001/; } # what to serve if upstream is not available or crashes error_page 500 502 503 504 /media/50x.html; } My Gunicorn Config: bind = "127.0.0.1:8001" workers = 3 worker_class = "gevent" Is there anything obvious that would be causing the requests to stay open for so long?

  Read the article

• Malicious content on server - next steps advice [closed]

  - by Under435

  Possible Duplicate: My server's been hacked EMERGENCY I just got an e-mail from my hosting company that they got a report of malicious content being hosted on my vps. I was unaware of this and started looking into it. I discovered a file called /var/www/mysite.com/osc.htm. Soon after I discovered some weird php files wp-includes.php and ndlist.php both recognized as being PHP/WebShell.A.1 virus. I removed all these files but I'm unsure of what to do next. Can anyone help me analyze the output below of sudo netstat -A inet -p -e and give advice on what's best to do next. Thanks very much in advance Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 localhost.localdo:mysql localhost.localdo:37495 TIME_WAIT root 0 - tcp 0 1 mysite.com:50524 xnacreators.net:smtp SYN_SENT Debian-exim 69746 25848/exim4 tcp 0 0 mysite.com:www tha165.thehealtha:37065 TIME_WAIT root 0 - tcp 0 0 localhost.localdo:37494 localhost.localdo:mysql TIME_WAIT root 0 - udp 0 0 mysite.com:59447 merlin.ensma.fr:ntp ESTABLISHED ntpd 3769 2522/ntpd udp 0 0 mysite.com:36432 beast.syus.org:ntp ESTABLISHED ntpd 4357 2523/ntpd udp 0 0 mysite.com:48212 formularfetischiste:ntp ESTABLISHED ntpd 3768 2522/ntpd udp 0 0 mysite.com:46690 formularfetischiste:ntp ESTABLISHED ntpd 4354 2523/ntpd udp 0 0 mysite.com:35009 stratum-2-core-a.qu:ntp ESTABLISHED ntpd 4356 2523/ntpd udp 0 0 mysite.com:58702 stratum-2-core-a.qu:ntp ESTABLISHED ntpd 3770 2522/ntpd udp 0 0 mysite.com:49583 merlin.ensma.fr:ntp ESTABLISHED ntpd 4355 2523/ntpd udp 0 0 mysite.com:56290 beast.syus.org:ntp ESTABLISHED ntpd 3771 2522/ntpd

  Read the article

• Updating and deleting java (red hat / centos) (new)

  - by JochemTheSchoolKid

  I am a total noob with linux. So please explain clearly if you have a solution for me. I have an VPS and I want to update JAVA. I found a guide on the Java site which says: rpm -e < package_name I searched for the packages: [root@srv1 ~]# rpm -qa | grep java java_cup-0.10k-5.el6.x86_64 java-1.5.0-gcj-1.5.0.0-29.1.el6.x86_64 Than I tried to do the delete command [root@srv1 ~]# rpm -e java-1.5.0-gcj-1.5.0.0-29.1.el6.x86_64 error: Failed dependencies: java-gcj-compat is needed by (installed) java_cup-1:0.10k-5.el6.x86_64 java-gcj-compat >= 1.0.70 is needed by (installed) sinjdoc-0.5-9.1.el6.x86_64 What should I do now? Removing has worked thanks to the answer below Problem two! Now am I installing this package from java [root@srv1 java]# rpm -ivh jre-7u9-linux-i586.rpm Preparing... ########################################### [100%] 1:jre ########################################### [100%] Unpacking JAR files... rt.jar... Error: Could not open input file: /usr/java/jre1.7.0_09/lib/rt.pack jsse.jar... Error: Could not open input file: /usr/java/jre1.7.0_09/lib/jsse.pack charsets.jar... Error: Could not open input file: /usr/java/jre1.7.0_09/lib/charsets.pack localedata.jar... Error: Could not open input file: /usr/java/jre1.7.0_09/lib/ext/localedata.pack plugin.jar... Error: Could not open input file: /usr/java/jre1.7.0_09/lib/plugin.pack javaws.jar... Error: Could not open input file: /usr/java/jre1.7.0_09/lib/javaws.pack deploy.jar... Error: Could not open input file: /usr/java/jre1.7.0_09/lib/deploy.pack Can someone help me again with this?

  Read the article

• How do I install php 5.3 on CentOS?

  - by fivelitresofsoda

  Hi, I have to install php5.3 on my centos server. If i do yum install php, the base repo installs 5.1.6 which is too old for the apps i need to install. So i've been trying to use the ius repository, following the official instructions from ius: root@linuxbox ~]# wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/ius-release-1-2.ius.el5.noarch.rpm root@linuxbox ~]# wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/epel-release-1-1.ius.el5.noarch.rpm root@linuxbox ~]# rpm -Uvh ius-release*.rpm epel-release*.rpm Ok. Now i simply do yum install php53, etc for all i need... but i get this error: Running rpm_check_debug Running Transaction Test Finished Transaction Test Transaction Check Error: file /usr/bin/php from install of php53u-cli-5.3.4-3.ius.el5.x86_64 conflicts with file from package php-cli-5.1.6-27.el5_5.3.x86_64 file /usr/bin/php-cgi from install of php53u-cli-5.3.4-3.ius.el5.x86_64 conflicts with file from package php-cli-5.1.6-27.el5_5.3.x86_64 file /usr/share/man/man1/php.1.gz from install of php53u-cli-5.3.4-3.ius.el5.x86_64 conflicts with file from package php-cli-5.1.6-27.el5_5.3.x86_64 file /etc/php.ini from install of php53u-common-5.3.4-3.ius.el5.x86_64 conflicts with file from package php-common-5.1.6-27.el5_5.3.x86_64 Error Summary ------------- I have no idea how to solve this. I think i have to delete the base packages however as a linux noob i don't know how to do that. Please help. Thank you.

  Read the article

• LVM2 volume group lost

  - by MrG

  I updated one of my servers, but - although I took care not to modify - the volume groups on /dev/sdb1 were lost, although the physical volumes seem to be still there: [root@server ~]# pvscan PV /dev/sda2 VG VolGroup lvm2 [465,16 GiB / 0 free] PV /dev/sdb1 lvm2 [1,82 TiB] Total: 2 [2,27 TiB] / in use: 1 [465,16 GiB] / in no VG: 1 [1,82 TiB] [root@server ~]# pvs -v Scanning for physical volume names PV VG Fmt Attr PSize PFree DevSize PV UUID /dev/sda2 VolGroup lvm2 a-- 465,16g 0 465,16g HftbaD-MBs0-3p7D-6O13-CrzU-T9Gb-6W0ofB /dev/sdb1 lvm2 a-- 1,82t 1,82t 1,82t dD4XZP-WStA-61xV-5Sff-ifmW-R4rR-JenHoU [root@server ~]# pvck -d -v /dev/sdb1 Scanning /dev/sdb1 Found label on /dev/sdb1, sector 1, type=LVM2 001 Found text metadata area: offset=4096, size=1044480 Found LVM2 metadata record at offset=10752, size=1037824, offset2=0 size2=0 Found LVM2 metadata record at offset=9216, size=1536, offset2=0 size2=0 Found LVM2 metadata record at offset=7168, size=2048, offset2=0 size2=0 Found LVM2 metadata record at offset=5632, size=1536, offset2=0 size2=0 I attempted to fix it as described here and was able to extract the 4 meta data sets listed above (using i.e. dd bs=1 skip=5632 count=1536 if=/dev/sdb1 of=output.file), none of them includes the lv_data which I'm missing. Please advise how I could access the files which should be on /dev/sdb1 there. Any help is appreciated!

  Read the article

• Why can't I see all of the client certificates available when I visit my web site locally on Windows 7 IIS 7?

  - by Jay

  My team has recently moved to Windows 7 for our developer machines. We are attempting to configure IIS for application testing. Our application requires SSL and client certificates in order to authenticate. What I've done: I have configured IIS to require SSL and require (and tried accept) certificates under SSL Settings. I have created the https binding and set it to the proper server certificate. I've installed all the root and intermediate chain certificates for the soft certificates properly in current user and local machine stores. The problem When I browse to the web site, the SSL connection is established and I am prompted to choose a certificate. The issue is that the certificate is one that is created by my company that would be invalid for use in the application. I am not given the soft certificates that I have installed using MMC and IE. We are able to utilize the soft certs from our development machines to our Windows 2008 servers that host the application. What I did: I have attempted to copy the Root CA to every folder location for the Current User and Location Machine account stores that the company certificate's root is in. My questions: Could I be mishandling the certs anywhere else? Could there be a local/group policy that could be blocking the other certs from use? What (if anything) should have to be done differently on Windows 7 from 2008 in regards to IIS? Thanks for your help.

  Read the article

• Changing open-files-limit in mysql 5.5

  - by davidv

  I'm having an issue with mysql 5.5 running on Ubuntu 12.04 with the open-files-limit parameter. I recently noticed some problems due to the 1024 limit, and actually the main system limit was set to 1024, so I modified /etc/security/limits.conf with the following: * soft nofile 32000 * hard nofile 32000 root soft nofile 32000 root hard nofile 32000 After that I check the ulimit value for root and even for mysql user, both returned the new value: 32000, so I assume the change has already been done. I also changed the value at the my.cnf file, setting open-files-limit to 24000, like this: open-files-limit = 24000 Now comes the odd part, when I restart the mysql service and check the open_files_limit variable, it returns that it's still set to 1024, so I'm having the same problems that before (obviously), I tried to use open-files-limit instead open_files_limit in the my.cnf config file, same result, BUT if I override the service command to start the service and start only using mysqld (no additional parameters), the service starts and when I check the parameter it returns 32000... I don't know where it's taking that value from, as it's not set at my.cnf and it's not being given through command line, at least, not for myself. Any ideas about why it's not working the change and how to solve it the normal way (launching it through service...)?

  Read the article

• Route all wlan0 traffic over tun0

  - by Tuinslak

  I'm looking for a way to route all wlan0 traffic (tcp and udp) over tun0 (openvpn). However, all other traffic originating from the device itself should not be routed through tun0. I'm guessing this could be realized using iptables or route, but none of my options seem to work. # route add -net 0.0.0.0 gw 172.27.0.1 dev wlan0 SIOCADDRT: No such process Info: This is because the VPN server is not redundant, and wlan users are not really important. However, all services running on the device are fairly important and having a VPN virtual machine with no SLA on it is just a bad idea. Trying to minimize the odds of something going wrong. So setting the VPN server as default gateway is not really an option. I also want all wlan0 user to use the VPN server's IP address as external IP. Edit with the script provided: root@ft-genesi-xxx ~ # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 172.27.0.17 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 10.13.37.0 0.0.0.0 255.255.255.0 U 0 0 0 wlan0 172.27.0.0 172.27.0.17 255.255.192.0 UG 0 0 0 tun0 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 root@ft-genesi-xxx ~ # ./test.sh RTNETLINK answers: No such process root@ft-genesi-xxx ~ # cat test.sh #!/bin/sh IP=/sbin/ip # replace with the range of your wlan network, or use fwmark instead ${IP} rule add from 10.13.37.0/24 table from-wlan ${IP} route add default dev tun0 via 127.72.0.1 table from-wlan ${IP} route add 10.13.37.0/24 dev wlan0 table from-wlan

  Read the article

• Failing to load rootfs: Ubuntu 10 + grub2 + rootfs ext4 w/ RAID1

  - by James

  I am having problems booting a new Ubuntu 10 (server) install. My primary HD (/dev/sda) is laid out as follows: Device Boot Start End Blocks Id System /dev/sda1 * 1 18 144553+ 83 Linux <-- /BOOT /dev/sda2 19 182401 1464991447+ 5 Extended /dev/sda5 19 2207 17583111 fd Linux raid autodetect /dev/sda6 2208 11934 78132096 fd Linux raid autodetect <-- / (ROOTFS) /dev/sda7 11935 182401 1369276146 fd Linux raid autodetect The rootfs is part of a RAID1 (software) array (currently degraded): # cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md2 : active raid1 sda6[1] 78132032 blocks [2/1] [_U] The UUIDs for the partitions are as follows: # blkid /dev/sda1 /dev/sda1: UUID="b25dd301-41b9-4f4d-9b0a-0e31713dd74c" TYPE="ext2" # blkid /dev/sda6 /dev/sda6: UUID="af7b9ede-fa53-c0c1-74be-31ec752c5cd5" TYPE="linux_raid_member" # blkid /dev/md2 /dev/md2: UUID="a0602d42-6855-482f-870c-6f6ecdcdae3f" TYPE="ext4" Finally, I have my grub2 menuentry setup as follows: ### BEGIN /etc/grub.d/10_linux ### menuentry 'Ubuntu, with Linux 2.6.32-25-server' --class ubuntu --class gnu-linux --class gnu --class os { insmod ext2 insmod raid insmod mdraid set root='(hd0,1)' search --no-floppy --fs-uuid --set b25dd301-41b9-4f4d-9b0a-0e31713dd74c linux /vmlinuz-2.6.32-25-server root=UUID=a0602d42-6855-482f-870c-6f6ecdcdae3f ro nosplash noplymouth initrd /initrd.img-2.6.32-25-server } When I attempt to boot, grub loads OK, however I eventually get the following error message: Gave up waiting for root device. ALERT /dev/disk/by-uuid/a0602d42-6855-482f-870c-6f6ecdcdae3f does not exist. Dropping to a shell! If from the grub bootloader I open a grub command line, I can ls (hd0,) and it lists the correct partitions with the UUIDs as shown above - sda6 shows 'a0602d42-6855-482f-870c-6f6ecdcdae3f' (the RAID UUID). If I ls (md2)/ it properly lists all the files on the RAID1 filesystem (ext4) so it doesn't appear to be an issue accessing the raid device. Does anyone have any suggestions as to what the problem might be? I can't figure this one out.

  Read the article

• CentOS 6.3 Virtual under OpenVZ cannot ping, host lookups, outbound connections while postfix running

  - by Paul Cravey

  My best theory is that some kernel limit is being hit preventing outbound connections. We have tried basically everything from tcpdumps to provisioning an entirely new virtual server (we do not have this problem on any other virtuals), however the problem somehow carried over, even with new postfix build (working). Emails work, and outbound connections work, so long as postfix does not have too much going on. /proc/user_beancounters shows no limits being hit (show below). Nevertheless, pings fail even to IP addresses. TCP stack appears healthy. Load is low. No iowait. Flushed iptables already. Has anyone experienced anything like this? uid resource held maxheld barrier limit failcnt 3: kmemsize 166216365 170262528 9223372036854775807 9223372036854775807 0 lockedpages 0 0 9223372036854775807 9223372036854775807 0 privvmpages 285727 351885 9223372036854775807 9223372036854775807 0 shmpages 16933 17605 9223372036854775807 9223372036854775807 0 dummy 0 0 0 0 0 numproc 150 303 9223372036854775807 9223372036854775807 0 physpages 314156 326191 0 1280000 0 vmguarpages 0 0 9223372036854775807 9223372036854775807 0 oomguarpages 165355 165355 9223372036854775807 9223372036854775807 0 numtcpsock 89 172 9223372036854775807 9223372036854775807 0 numflock 22 76 9223372036854775807 9223372036854775807 0 numpty 1 2 9223372036854775807 9223372036854775807 0 numsiginfo 0 75 9223372036854775807 9223372036854775807 0 tcpsndbuf 2733472 4371752 9223372036854775807 9223372036854775807 0 tcprcvbuf 1798336 5427296 9223372036854775807 9223372036854775807 0 othersockbuf 491120 1000760 9223372036854775807 9223372036854775807 0 dgramrcvbuf 0 238728 9223372036854775807 9223372036854775807 0 numothersock 361 505 9223372036854775807 9223372036854775807 0 dcachesize 135941831 136114679 9223372036854775807 9223372036854775807 0 numfile 2905 4990 9223372036854775807 9223372036854775807 0 dummy 0 0 0 0 0 dummy 0 0 0 0 0 dummy 0 0 0 0 0 numiptent 8 9 9223372036854775807 9223372036854775807 0 [root@bni /]# ping 4.2.2.1 PING 4.2.2.1 (4.2.2.1) 56(84) bytes of data. --- 4.2.2.1 ping statistics --- 9 packets transmitted, 0 received, 100% packet loss, time 8493ms [root@bni /]# service postfix stop [root@bni /]# ping 4.2.2.1 PING 4.2.2.1 (4.2.2.1) 56(84) bytes of data. 64 bytes from 4.2.2.1: icmp_seq=1 ttl=53 time=8.63 ms 64 bytes from 4.2.2.1: icmp_seq=2 ttl=53 time=8.62 ms 64 bytes from 4.2.2.1: icmp_seq=3 ttl=53 time=8.63 ms 64 bytes from 4.2.2.1: icmp_seq=4 ttl=53 time=8.66 ms Outbound connections of all sorts fail when postfix is running.

  Read the article

• LAMP Setup, PHP's session_start permission denied

  - by Andrew

  I'm trying to set up a development environment for a legacy system that runs CentOS 4.8, PHP 4.3.9, and MySQL 4.1.22. I'm matching OS and software versions to keep the development server as close to the production server as possible. When I fire up PHPMyAdmin's setup script (version 2.11.10.1, of course) the installation errors out and I see these errors in my error log: [client 172.18.141.74] PHP Warning: session_start(): open(/var/lib/php/session/sess_b5b90f86bd3dcfad315ff24cb7483a79, O_RDWR) failed: Permission denied (13) in /home/www/intranet/phpmyadmin/libraries/session.inc.php on line 87 [client 172.18.141.74] PHP Warning: Unknown(): open(/var/lib/php/session/sess_b5b90f86bd3dcfad315ff24cb7483a79, O_RDWR) failed: Permission denied (13) in Unknown on line 0 [client 172.18.141.74] PHP Warning: Unknown(): Failed to write session data (files). Please verify that the current setting of session.save_path is correct (/var/lib/php/session) in Unknown on line 0 I've done some searching on ServerFault and on teh Googles and I see that a common reason for this error is that the session.save_path isn't writable by the www user. I also found where in /etc/php.ini this URL is set: session.save_path. My session.save_path is set to: session.save_path = /var/lib/php/session I've since changed the owner and the group of /var/lib/php/session and still have the same error. Here's the result of ls -la for /var/lib/php [root@localhost php]# ls -la total 24 drwxrwxr-x 3 www www 4096 Oct 23 20:21 . drwxr-xr-x 17 root root 4096 Oct 23 20:31 .. drwxrwx--- 2 www www 4096 Jun 1 2009 session ...But I'm still getting the same error. Is there another possibility for why I'm getting this error?

  Read the article

• Nagios send mail when server is down

  - by tzulberti

  I am using nagios 3.06 to monitor the servers. When a service is critical, it sends a mail, but when a server is down no mail is sent. Even if all the services go to critical state, no mail is sent. I have the following configuration: define command {     command_name notify-host-by-email     command_line python /etc/nagios3/send_mail.py "[Nagios] $HOSTNAME$" "******** Nagios ****\n\n Host: $HOSTNAME$\n Description: the server is down" } define command{     command_name notify-service-by-email     command_line python /etc/nagios3/send_mail.py "[Nagios] $HOSTNAME$: $SERVICEDESC$ ($NOTIFICATIONTYPE$)" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\nService: $SERVICEDESC$\nHost: $HOSTALIAS$\nAddress: $HOSTADDRESS$\nState: $SERVICESTATE$\nDate/Time: $LONGDATETIME$\nAdditional Info:$SERVICEOUTPUT$" } The python script is a script to sent a mail. It works if I execute it from the command line, but it doesn't sents an email from nagios. What I am doing wrong? UPDATE: The contact data is: define contact{     contact_name root     alias Root     service_notification_period 24x7     host_notification_period 24x7     service_notification_options w,u,c,r     host_notification_options d,r     service_notification_commands notify-service-by-email     host_notification_commands notify-host-by-email     email [email protected] } define contactgroup{     contactgroup_name admins     alias Nagios Administrators     members root }

  Read the article

< Previous Page | 138 139 140 141 142 143 144 145 146 147 148 149  | Next Page >