Search Results

Search found 11180 results on 448 pages for 'serial port'.

Page 142/448 | < Previous Page | 138 139 140 141 142 143 144 145 146 147 148 149  | Next Page >

• ubuntu 9.10 installer doesn't recognize the hard drive

  - by dan

  I downloaded Ubuntu 9.10 x86_64 and am trying to install it on a fairly modern system with a Gigabyte GA-MA770-UD3 motherboard. Ubuntu 9.04 installed fine and still will when I stick that disc in, but 9.10 doesn't see my hard drive (western digital 250GB). If I boot from the disc, I can install gparted and it does recognize the drive, but when I try to start the install process from the live disc, Ubuntu again doesn't recognize the hard drive. I checked /var/log/messages and see this: Nov 12 17:28:08 ubuntu activate-dmraid: Serial ATA RAID disk(s) detected. If this was bad, boot with 'nodmraid'. Nov 12 17:28:08 ubuntu activate-dmraid: Enabling dmraid support Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. Nov 12 17:28:08 ubuntu activate-dmraid: no raid sets and with names: "nvidia_ciiajheb-0" Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. I checked my BIOS, SATA is enabled and is set to IDE mode, so there shouldn't be software RAID, but nonetheless, I added nodmraid to the boot line and tried again. It still doesn't recognize the drive. I checked /var/log/messages again and now see this: Nov 12 17:49:38 ubuntu activate-dmraid: Serial ATA RAID disk(s) detected. If this was boad, boot with 'nodmraid'. Nov 12 17:49:38 ubuntu activate-dmraid: Enabling dmraid support Nov 12 17:49:38 ubuntu activate-dmraid: WARNING: dmraid disabled by boot option Nov 12 17:49:38 ubuntu activate-dmraid: WARNING: dmraid disabled by boot option Any ideas on things to try? I've tried all of the various BIOS settings for SATA. IDE,RAID, etc. Nothing seems to work.

  Read the article

• Running multiple copies of openssh-server (sshd) on Ubuntu

  - by cecilkorik

  I may be attacking this problem the wrong way, if so let me know. I have a server which is available through SSH from both the public internet and the local LAN. I would like to have two very different security policies for each, by running two copies of sshd with two different sshd_config files each on a different port. Some of the things I'd like to change is to allow password or public-key authentication on the LAN, but public-key only from the internet. All (real) users could login from the LAN side, but only certain authorized users would be individually whitelisted to login through the internet. As far as I can tell this requires having two different SSH daemons running on different ports with different sshd_configs. I am fine with the different ports part, I can easily forward port 22 to any port I want through my firewall. So my question is what is the best way to actually START the second sshd under Ubuntu 10.04 LTS. Is there a recommended way to do something like this? Surely I am not the first person with this sort of need. I have a bit of experience with upstart, and I can manually hack the second sshd into /etc/init/ssh.conf I suppose but I'm not sure if that will get overwritten by the package. However I do it, It's important to ensure both sshd processes always get restarted after any automatic or manual upgrade of the openssh-server package. Thanks in advance.

  Read the article

• SendMail not working in CentOs 6.4

  - by Kane

  I am trying to send e-mails from my CentOS 6.4 but it does not work. My knowledge about servers is quite limited, so I hope someone can help me. Here is what I did: First i tried to send an email using the "mail" command, but it was not in the OS so I installed it. # yum install mailx After that, I tried sending an email using the "mail" command, but it did not send anything. I checked it on the internet and I realized I needed an e-mail server like sendmail, so I installed it. # yum install sendmail sendmail-cf sendmail-doc sendmail-devel After that, I configured it following some tutorials. First, sendmail.mc file. # vi /etc/mail/sendmail.mc Commented out the next line: BEFORE # DAEMON_OPTIONS('Port=smtp, Name=MTA') dnl AFTER # dnl DAEMON_OPTIONS('Port=smtp, Name=MTA') dnl Check that the next lines are correct: # FEATURE(`virtusertable', `hash -o /etc/mail/virtusertable.db')dnl # ... # FEATURE(use_cw_file)dnl # ... # FEATURE(`access_db', `hash -T<TMPF> -o /etc/mail/access.db')dnl Update sendmail.cf # m4 /etc/mail/sendmail.mc > /etc/mail/sendmail.cf Open the port 25 adding the proper line in the iptables file # vi /etc/sysconfig/iptables # -A INPUT -m state --state NEW -m tcp --dport 25 -j ACCEPT restart iptables and sendmail # service iptables restart # service sendmail restart So i thought that would be ok, but when i tried: # mail '[email protected]' # Subject: test subject # test content #. I checked the mail log: # vi /var/log/maillog And that is what I found: Aug 14 17:36:24 dev-admin-test sendmail[20682]: r7D8RItS019578: to=<[email protected]>, ctladdr=<[email protected]> (0/0), delay=1+00:09:06, xdelay=00:00:00, mailer=esmtp, pri=2460500, relay=alt4.gmail- smtp-in.l.google.com., dsn=4.0.0, stat=Deferred: Connection timed out with alt4.gmail-smtp-in.l.google.com. I do not understand why there is a connection time out. Am I missing something? Can anyone help me, please? Thank you.

  Read the article

• Cherrypy web application won't communicate outside localhost via VPN

  - by Geoffrey Shea

  I'm trying to run a Python2.7/Cherrypy web server on Win 7 which is connected to a VPN to establish a dedicate IP address. (If I run the exact same application on Win XP connected to the VPN it works fine.) On Win 7 I tried configuring it to use port 8080, 8005, or 80 with no improvements. I turned off Windows Firewall altogether to test and there was no improvement. If I run Apache on the Win 7 machine on port 80 it works fine so I'm pretty sure it's not the VPN service or router. If I go to WhatismyIP.com it shows that I have the IP address being provided by the VPN. Here is the Python code, but I suspect the problem is the network configuration: import cherrypy class HelloWorld: def index(self): return "Hello world!3" index.exposed = True cherrypy.root = HelloWorld() cherrypy.config.update({"global":{ "server.environment": "production", "server.socketPort": 8005 } }) cherrypy.server.start() This will return a web page if I go to localhost:8005, but not if I go to the VPN IP address:8005 from another machine. As I said, if I run Apache on the Win 7 machine on port 80 I can see it at localhost:80 AND at the VPN IP address:80 from another machine. Thanks for any light you can shed! Geoffrey

  Read the article

• Printer spooler service stop running when sent print job

  - by Hanan N.

  Every time i am sending a print job to the printer, i am don't get any response from the printer, and at the printer job list at the status of the job, i see that there was an Error, but it don't give me any clue on what could be the problem. After some investigation i found that every time that i send the print job to the printer the printer spooler service stops to run, then after a second or two it start again (i think that this behavior is related to the printer spooler settings to rerun it self after it stops). Things that i have tried so far: Remove and Install again the Driver. After removing the driver, i have removed the unnecessary registry keys according to this article from Microsoft, these are: Rename all files and folders in: c:\windows\system32\spool\drivers\w32x86 Remove anything but Drivers Print and Processors: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environment\Windows NT x86 Remove anything in here: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors but: BJ Language Monitor Local Port Microsoft Document Imaging Writer Monitor Microsoft Shared Fax Monitor Standard TCP/IP Port USB Monitor WSD Port Disconnect and Reconnect the Printer. Clean the computer from Viruses & Spywares. Currently i am stuck, i have no more things to try, if anybody know about any kind of solution please let me know about it. Since i am want to keep this post as general problem that relate to the printer spooler, and not just my particular problem, i didn't included inside the windows version & the printer model, they are (although i think that it isn't relate just for that particular model): Windows 7 32bit, HP Officejet 4500 G510g-m (connect to the computer via USB). Thanks.

  Read the article

• SSH tunnel for socks5 proxy is slow with concurrent load

  - by RawwrBag

  I ssh to a remote AWS server using Ubuntu. I use ssh's port forwarding capabilities to do this. I have tried forwarding a dynamic port (ssh -D) or a single port (ssh -L with dante running as a remote socks server). Both are equally slow. I also tried different ciphers (ssh -c). Concurrent TCP connections pretty much do not work. For example, I can go to speedtest.net and start a test (which is fairly fast, probably maxes out my line speed) and if I try and do anything (i.e. load google.com) while the test is still running, all the additional connections seem to hang until the speed test is over. I realize OpenSSH is single-threaded. Is this the problem? It doesn't even show up on my top. Same goes for sshd on the remote server -- no processor hit. Is there anyway to bump ssh performance or should I step up to OpenVPN or something better suited for this?

  Read the article

• linux routing issue

  - by Duc To

  Hi! I have 2 linksys routers which has linux running on it and using tomato firmware.. both has internet lines plugged on but only 1 acts as DHCP server (router 1) What I am having to achieve is that all packets goes to router 1 from internal IPs want to access internet will go out to that internet line but from 1 specific port, if router 1 detects packets from a specific source port (for ex: http port: 80), it will redirect that packet to router 2 and goes out to the internet from there.. I have found some documents which give solution that I will need a linux servers with 2 ethernet cards and then we plug both internet lines on that server and routing base on it but I do not want to do that because my boss does not want to have an extra work mantaining that server, besides, he says that the router itself already a linux one so why.. I tend to agree his points.. Can it be done or a seperate linux server acting as a router is a must? Thank you all in advance and really look forward in your replies.. I am newbie to linux network and it seems to be something out of my capacity to solve :( Your sincerely! Duc To

  Read the article

• Are SATA II and SATA 3.0 Gbps compatible?

  - by Johnny Maelstrom

  I am trying to check that if I buy a new internal HDD it will work in the NAS I am buying. Currently I'm confused about naming schemes and once that is resolved whether there is compatibility. I will gladly author this question to be more general if there is not already an article helping with the confusion of SATA naming and standards. I see similar, but not identical questions and will accept this as a duplicate if thought as such. The specifications on the eCommerce site for the NAS says, "Controller Interface Type Serial ATA-150", the product home page for the manufacturer says, "Compatible with SATA and SATA II HDD". The specifications on the eCommerce site for the hard drives say, "Interface Type Serial ATA-300", the product home page for the manufacturer says, "Interface SATA 3.0 Gbps" Wikipedia says many things about different naming conventions, the closest being, "SATA II 3.0 Gbit/s, which was colloquially referred to as "SATA 3G" [bps] or "SATA 300" [MB/s] since 1.5 Gbit/s SATA I and 1.5 Gbit/s SATA II were referred to as both "SATA 1.5G" [b/s] or "SATA 150" [MB/s]). Therefore, they will operate with negligible differences between them." Are SATA II and SATA 3.0 Gbps the same? I feel I'm tantalisingly close to getting a definitive answer here before I purchase, but really want to clear up these naming schemes.

  Read the article

• MAMP Pro virtual hosts on Mountain Lion not being recognized

  - by user135242

  I'm running MAMP PRO 2.1.1 on OSX 10.8.1 and not having any luck getting Apache to recognize any hosts that have been set up in MAMP besides localhost. This only happens when trying to use port 80. When I switch to port 8888 everything runs fine. Mountain Lion's Apache has been disabled and I get no errors or warnings when starting MAMP and the servers. Any doc root I set for "localhost" runs without problem. Any other server name I define, however, results in "cannot connect" when viewing in Chrome (not to be confused with "cannot find" - the browser is in fact following /etc/hosts to 127.0.0.1, but MAMP's Apache is simply not responding) I was wondering if anyone else has run into this issue or knows how to solve it. I'm working on some WordPress development and it keeps wanting to redirect to the base URL (with no port reference) even during setup. I'm sure I could fix things from the WP side but I'd rather figure out what the root issue is with MAMP. Thanks in advance for any insight you can provide.

  Read the article

• Router reporting failed admin login attempts from home server

  - by jeffora

  I recently noticed in the logs of my home router that it relatively regularly lists the following entry: [admin login failure] from source 192.168.0.160, Monday, June 20,2011 18:13:25 192.168.0.160 is the internal address of my home server, running Windows Home Server 2011. Is there anyway I can find out what specifically is trying to login to the router? Or is there some explanation for this behaviour? (not sure if this belongs here or on superuser...) [Update] I've run both Wireshark and netmon for a while on my home server. Wireshark captured the traffic, but didn't really show anything useful (or nothing I could make use of). A simple HTTP GET request is sent from the server (192.168.0.160) to the router (192.168.0.1), from a seemingly random port (I've seen examples from 50068, 52883), and it appears to do it twice in quick succession (incrementing port by 1), about every hour. Running netstat around the time of the failure didn't show anything (probably too long after anyway). I tried using netmon as it categorises by process, so I thought it might show a corresponding process for the port. Unfortunately, this comes in under the 'unknown' category, meaning it's basically just a slower, less useful Wireshark. I know there's not much to go on here, but does this help in anyway?

  Read the article

• Play framework 2.2 using Upstart 1.5 (Ubuntu 12.04)

  - by Leon Radley

  I'm trying to get Play 2.2 working with upstart. I've been running Play 2.x with upstart since it's release and it's never been a problem. But since the release of 2.2 and the change to http://www.scala-sbt.org/sbt-native-packager/ play doesn't want to start any more. Here's the config I'm using description "PlayFramework 2.2" version "2.2" env APP=myapp env USER=myuser env GROUP=www-data env HOME=/home/myuser/app env PORT=9000 env ADDRESS=127.0.0.1 env CONFIG=production.conf env JAVAOPTS="-J-Xms128M -J-Xmx512m -J-server" start on runlevel [2345] stop on runlevel [06] respawn respawn limit 10 5 expect daemon # If you want the upstart script to build play with sbt pre-start script chdir $HOME sbt clean compile stage -mem $SBTMEM end script exec start-stop-daemon --pidfile ${HOME}/RUNNING_PID --chuid $USER:$GROUP --exec ${HOME}/bin/${APP} --background --start -- -Dconfig.resource=$CONFIG -Dhttp.address=$ADDRESS -Dhttp.port=$PORT $JAVAOPTS I've changed the JAVAOPTS to include the -J- and I've also changed the path to use the new startscript located in the /bin/ dir. I've read that upstart 1.4 has setuid and setguid. I've tried removing the start-stop-daemon but I haven't got that working either. Any suggestions would be appreciated.

  Read the article

• Centos iptables configuration for Wordpress and Gmail smtp

  - by Fabrizio

  Let me start off by saying that I'm a Centos newby, so all info, links and suggestions are very welcome! I recently set up a hosted server with Centos 6 and configured it as a webserver. The websites running on it are nothing special, just some low traffic projects. I tried to configure the server as default as possible, but I like it to be secure as well (no ftp, custom ssh port). Getting my Wordpress to run as desired, I'm running into some connection problems. 2 things are not working: installing plugins and updates through ssh2 (failed to connect to localhost:sshportnumber) sending emails from my site using the Gmail smtp (Failed to connect to server: Permission denied (13)) I have the feeling that these are both related to the iptables configuration, because I've tried everything else (I think). I tried opening up the firewall to accept traffic for ports 465 (gmail smtp) and ssh port (lets say this port is 8000), but both the issues remain. Ssh connections from the terminal are working fine though. After each change I tried implementing I restarted the iptables service. This is my iptables configuration (using vim): # Generated by iptables-save v1.4.7 on Sun Jun 1 13:20:20 2014 *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -p tcp -m tcp --dport 8000 -j ACCEPT -A INPUT -p tcp -m tcp --dport 80 -j ACCEPT -A INPUT -p tcp -m tcp --dport 465 -j ACCEPT -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -j REJECT --reject-with icmp-host-prohibited -A OUTPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A OUTPUT -o lo -j ACCEPT -A OUTPUT -p tcp -m tcp --dport 8000 -j ACCEPT -A OUTPUT -p tcp -m tcp --dport 465 -j ACCEPT COMMIT # Completed on Sun Jun 1 13:20:20 2014 Are there any (obvious) issues with my iptables setup considering the above mentioned issues? Saying that the firewall is doing exactly nothing in this state is also an answer... And again, if you have any other suggestions for me to increase security (considering the basic things I do with this box), I would love hear it, also the obvious ones! Thanks!

  Read the article

• Using Active Directory through a Firewall

  - by Adam Brand

  I had kind of a weird setup today where I wanted to enable Windows Firewall on a Windows 2003 R2 SP2 computer that would act as an Active Directory Domain Controller. I didn't see one resource on the Internet that listed what would be required to do this, so I thought I'd list them here and see if anyone has anything to add/sees something that isn't necessary. Ports to Open with "subnet" scope: 42 | TCP | WINS (if you use it) 53 | TCP | DNS 53 | UDP | DNS 88 | TCP | Kerberos 88 | UDP | Kerberos 123 | UDP | NTP 135 | TCP | RPC 135 | UDP | RPC 137 | UDP | NetBIOS 138 | UDP | NetBIOS 139 | TCP | NetBIOS 389 | TCP | LDAP 389 | UDP | LDAP 445 | TCP | SMB 445 | UDP | SMB 636 | TCP | LDAPS 3268 | TCP | GC LDAP 3269 | TCP | GC LDAP Ports to Open with "Any" Scope (for DHCP) 67 | UDP | DHCP 2535 | UDP | DHCP ALSO You need to restrict RPC to use fixed ports instead of everything 1024. For that, you need to add two registry keys: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NTDS\Parameters Registry value: TCP/IP Port Value type: REG_DWORD Value data: <-- pick a port like 1600 and put it here HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Netlogon\Parameters Registry value: DCTcpipPort Value type: REG_DWORD Value data: <-- pick another port like 1650 and put it here ...don't forget to add entries in the firewall to allow those in (TCP, Subnet scope). After doing all that, I was able to add a client computer to the AD domain (behind Windows Firewall) and log in successfully.

  Read the article

• Ubuntu xrandr rotate issue

  - by user83544

  I've just bought a second monitor for my PC which happens to be a pivot monitor. I've already read lots of forums related to my problem but haven't come across a solution - I have the same symptoms as dozens of posts but no matter whatever I try it just doesn't work. I've already changed the xorg.conf file and added in the device section just under Driver "nvidia" the following for my second monitor: Option "RandRRotation" "on" When I save and reboot I try to rotate my screen with the nvidia X server settings by choosing the second monitor and clicking either "left" or "right" for the rotation. It immediately exits the nvidia settings window and does nothing. I tried within the terminal by typing: xrandr -o right I get the following error: X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 154 (RANDR) Minor opcode of failed request: 2 (RRSetScreenConfig) Serial number of failed request: 14 Current serial number in output stream: 14 I actually manage to rotate it with Option "Rotate" "CCW" instead of "RandRRotation". The problem with this solution is that you get the second monitor in the right position, but any window you open on that screen is practically unchangeable. You can't change the size nor move it, making it useless for reading PDFs, which is the main reason why I bought this second screen to help me write my thesis. Any help is really appreciated. sudo lshw -c video hiram@hiram-linux:~$ sudo lshw -c video *-display description: VGA compatible controller product: nVidia Corporation vendor: nVidia Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:16 memory:f8000000-f9ffffff memory:d8000000-dfffffff memory:d4000000-d7ffffff ioport:dc00(size=12 memory:fbd80000-fbdfffff

  Read the article

• Requests are making it to my app server, but not into node.js -- why?

  - by Zane Claes

  I detailed in this question on StackOverflow how some random requests are not making it from the client to my Node.js app server, resulting in a gateway timeout. In summary, identical requests are, at random, not even making it far enough to trigger a console.log() in my first line of express middleware. I need to narrow down the problem, though, to find out WHERE the traffic is being lost and it was suggested that I try a packet sniffer on my app servers. Here's my setup: 2x Load Balancers (m1.larges) 2x node.js servers (also m1.large) Here's what's interesting/unusual: the node.js servers started as PHP servers with an Apache stack and continue to serve PHP files for my domain (streamified.me). However, I use a little httpd.conf magic on the app servers so that requests to api.streamified.me get routed over port 8888 to the node.js server: RewriteCond %{HTTP_HOST} ^api.streamified.me RewriteRule ^(.*) http://localhost:8888$1 [P] So, the request hits the load balancer = goes to an app server = gets routed to port 8888 if it's intended for the API = gets handled by node.js So, in the same httpd.conf file, I turned on RewriteLogLevel 5 and then created a simple PHP+CURL script on my localhost to hit my api.streamified.me with a random URL (which should cause node.js to trigger a simple "not found" response) until it resulted in a Gateway timeout. Here, you can see that it has happened -- and the rewrite log shows that the request was definitely received by the app server and forwarded to port 8888... but it was never received by node.js (or, at least, the first line of code in the first line of middleware never gets it...) Image Link: http://i.stack.imgur.com/3OQxS.png

  Read the article

• Apache local verses external (domain)

  - by Jessy Houle

  I have an Apache server running on Ubuntu server 10, using Passenger for Ruby on Rails. I have configured my site under the sites-enabled directory of Apache and can hit the server with an internal IP address (192.168.X.X) and the site comes back as expected. However, whenever I try to hit the site externally, either through the domain name or the IP address tied to the domain name, the site will not come back. I have a router in the middle with a static IP address, with Port Forwarding turned on (forwarding 80/443) to the server and I'm quite confident the issue isn't there. In fact, I even DMZed to the Ubuntu Server just to make sure. Also, all router firewall options have been turned off. So here is the question... Is there something else I have to do with Ubuntu server to allow externally requested port 80 traffic? Otherwise, is there some settings that need to be set in Apache to allow domain or external IP address port 80 traffic through? I'm pretty new to Apache, so, please take it a bit easy on me :-) Thank you for your responses. -Jessy Houle

  Read the article

• Ubuntu 10.04 network manager issues

  - by Shark

  I was using the default network manager to connect to my wi-fi network, but if the connection is dropped or router restarted the network manager wont reconnect automatically after i guess a couple of tries and just gives a pop-up to connect manually . To avoid this annoyance I installed WICD but though it does try to reconnect to the network after a drop in connection it is unable to resolve the ip address and i am left with an even bigger annoyance . 1. Is there a way to counter either of these issues ? 2. Something like a background process that will check network status periodically and then try to connect to a favored network ? Edit- out put of lshw -C network *-network description: Wireless interface product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:12:00.0 logical name: eth1 version: 01 serial: c0:cb:38:18:9b:7f width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.60.48.36 ip=192.168.11.2 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:17 memory:fbc00000-fbc03fff *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:13:00.0 logical name: eth0 version: 02 serial: f0:4d:a2:94:2d:74 size: 10MB/s capacity: 100MB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10MB/s resources: irq:29 ioport:e000(size=256) memory:d0b10000-d0b10fff(prefetchable) memory:d0b00000-d0b0ffff(prefetchable) memory:fb200000-fb21ffff(prefetchable)

  Read the article

• Best method to redirect internal DNS to external website?

  - by ProfessionalAmateur

  We host several web based applications outside of intranet. The URL's to these applications are long, complex and overall not user friendly. Ex: http://hostingsite:port/approot/folder/folder/login.aspx <-- (production) http://hostingsite:port22/approot/folder/folder/login.aspx <-- (dev) http://hostingsite:port33/approot/folder/folder/login.aspx <-- (test) I'd like to create an internal DNS entry to allow users to access these sites with ease. Ex: http://prod --> http://hostingsite:port/approot/folder/folder/login.aspx http://dev --> http://hostingsite:port22/approot/folder/folder/login.aspx I'm not familiar with the DNS process and setup, as far as I know a DNS can only be redirected to an IP, but not to subdomains for directory paths as described above? Is this a correct assumption? I am thinking for throwing up an internal webserver that will listen to the internal DNS entries and redirect to the external sites. http://prod --> [internal webserver] --> redirect --> http://hostingsite:port/approot/folder/folder/login.aspx Is there a better way to do this?

  Read the article

• How to connect AD Explorer from Sysinternals to Global Catalog

  - by Oliver

  I'm using the sysinternals AD Explorer quite frequently to search and inspect an Active Directory without any big problems. But now i'd like to connect not only to a single AD Server. Instead i like to inspect the global catalog. If i enter within the AD Explorer connect dialog only the dns name of the machine (e.g. dns.to.domain.controller) that is serving the global catalog i only receive the concrete domain for which it is responsible, but not the whole forest (that's normal behaviour and expected by me). If i'm going to add the default port number (3268) for the global catalog in the form dns.to.domain.controller:3268 AD Explorer will simply crash without any further message. The global catalog itself works as expected under the given name and port number, cause our apache server use exactly this address and port number to authenticate some users. So any hints or tips to access the global catalog out of AD Explorer? Or there are any other nice tools like AD Explorer out there that doesn't have any problems to access the global catalog?

  Read the article

• SSH Connection Error : No route to host

  - by dewbot

  There are three machines in this scenario: Desktop A : [email protected] Laptop A : [email protected] Machine B : [email protected] All the machines have Ubuntu 11.04 (Desktop A is a 64bit one) and have both openssh-server and openssh-client. Now when I try to connect Desktop A to Laptop A or vice-versa by ssh [email protected] I get an error as port 22: No route to host in both the cases. I own both the machines, now if I try same commands from my friend's machine, i.e. via Desktop B, I can access both my Laptop and Desktop. But if I try to access Desktop B from my Laptop or by Desktop I get port 22: Connection timed out I even tried changing ssh port no. in ssh_config file but no success. Note: that 'Laptop A' uses WiFi connection while 'Machine A' uses Ethernet Connection and 'Machine B' is on an entirely different network. Laptop A && Desktop A - Router/Nano_Rcvr provided to me by ISP. So to one Router two Machines are connected and can be accessed at the same time. here is my ifconfig output for both the machines :- Laptop wlan0 Link encap:Ethernet HWaddr X:X:X:X:00:bc inet addr:1.23.73.111 Bcast:1.23.95.255 Mask:255.255.224.0 inet6 addr: fe80::219:e3ff:fe04:bc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:108409 errors:0 dropped:0 overruns:0 frame:0 TX packets:82523 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:44974080 (44.9 MB) TX bytes:22973031 (22.9 MB) Desktop eth0 Link encap:Ethernet HWaddr X:X:X:X:c5:78 inet addr:1.23.68.209 Bcast:1.23.95.255 Mask:255.255.224.0 inet6 addr: fe80::227:eff:fe04:c578/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:10380 errors:0 dropped:0 overruns:0 frame:0 TX packets:4509 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1790366 (1.7 MB) TX bytes:852877 (852.8 KB) Interrupt:43 Base address:0x2000

  Read the article

• How to Set Up an SMTP Submission Server on Linux

  - by Kevin Cox

  I was trying to set up a mail server with no luck. I want it to accept mail from authenticated users only and deliver them. I want the users to be able to connect over the internet. Ideally the mail server wouldn't accept any incoming mail. Essentially I want it to accept messages on a receiving port and transfer them to the intended recipient out port 25. If anyone has some good links and guides that would be awesome. I am quite familiar with linux but have never played around with MTA's and am currently running debian 6. More Specific Problem! Sorry, that was general and postfix is complex. I am having trouble enabling the submission port with encryption and authentication. What Works: Sending mail from the local machine. (sendmail [email protected]). Ports are open. (25 and 587) Connecting to 587 appears to work, I get a "need to starttls" warning and starttls appears to work. But when I try to connect with the next command I get the error below. # openssl s_client -connect localhost:587 -starttls smtp CONNECTED(00000003) depth=0 /CN=localhost.localdomain verify error:num=18:self signed certificate verify return:1 depth=0 /CN=localhost.localdomain verify return:1 --- Certificate chain 0 s:/CN=localhost.localdomain i:/CN=localhost.localdomain --- Server certificate -----BEGIN CERTIFICATE----- MIICvDCCAaQCCQCYHnCzLRUoMTANBgkqhkiG9w0BAQUFADAgMR4wHAYDVQQDExVs b2NhbGhvc3QubG9jYWxkb21haW4wHhcNMTIwMjE3MTMxOTA1WhcNMjIwMjE0MTMx OTA1WjAgMR4wHAYDVQQDExVsb2NhbGhvc3QubG9jYWxkb21haW4wggEiMA0GCSqG SIb3DQEBAQUAA4IBDwAwggEKAoIBAQDEFA/S6VhJihP6OGYrhEtL+SchWxPZGbgb VkgNJ6xK2dhR7hZXKcDtNddL3uf1YYWF76efS5oJPPjLb33NbHBb9imuD8PoynXN isz1oQEbzPE/07VC4srbsNIN92lldbRruDfjDrAbC/H+FBSUA2ImHvzc3xhIjdsb AbHasG1XBm8SkYULVedaD7I7YbnloCx0sTQgCM0Vjx29TXxPrpkcl6usjcQfZHqY ozg8X48Xm7F9CDip35Q+WwfZ6AcEkq9rJUOoZWrLWVcKusuYPCtUb6MdsZEH13IQ rA0+x8fUI3S0fW5xWWG0b4c5IxuM+eXz05DvB7mLyd+2+RwDAx2LAgMBAAEwDQYJ KoZIhvcNAQEFBQADggEBAAj1ib4lX28FhYdWv/RsHoGGFqf933SDipffBPM6Wlr0 jUn7wler7ilP65WVlTxDW+8PhdBmOrLUr0DO470AAS5uUOjdsPgGO+7VE/4/BN+/ naXVDzIcwyaiLbODIdG2s363V7gzibIuKUqOJ7oRLkwtxubt4D0CQN/7GNFY8cL2 in6FrYGDMNY+ve1tqPkukqQnes3DCeEo0+2KMGuwaJRQK3Es9WHotyrjrecPY170 dhDiLz4XaHU7xZwArAhMq/fay87liHvXR860tWq30oSb5DHQf4EloCQK4eJZQtFT B3xUDu7eFuCeXxjm4294YIPoWl5pbrP9vzLYAH+8ufE= -----END CERTIFICATE----- subject=/CN=localhost.localdomain issuer=/CN=localhost.localdomain --- No client certificate CA names sent --- SSL handshake has read 1605 bytes and written 354 bytes --- New, TLSv1/SSLv3, Cipher is DHE-RSA-AES256-SHA Server public key is 2048 bit Secure Renegotiation IS supported Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : DHE-RSA-AES256-SHA Session-ID: E07926641A5EF22B15EB1D0E03FFF75588AB6464702CF4DC2166FFDAC1CA73E2 Session-ID-ctx: Master-Key: 454E8D5D40380DB3A73336775D6911B3DA289E4A1C9587DDC168EC09C2C3457CB30321E44CAD6AE65A66BAE9F33959A9 Key-Arg : None Start Time: 1349059796 Timeout : 300 (sec) Verify return code: 18 (self signed certificate) --- 250 DSN read:errno=0 If I try to connect from evolution I get the following error: The reported error was "HELO command failed: TCP connection reset by peer".

  Read the article

• SSH attcack CentOS Amazon EC2

  - by user37143

  Hi, I run a few Rightscale CentOS AMI based instances on Amazon EC2. Two months back I found that our SSHD security is compromised( I had added host.allow and host.deny for ssh). So I created new instances and done an IP based ssh that allows only our IPs through AWS Firewall(ec2-authorize) and chnaged the ssh 22 default port to some other port but two days back I found I was not able to login to the server and when I tried on 22 port the ssh got connected and I found that sshd_conf was changed and when I tried to edit sshd_config I found root had no write permission on the file. So I tried a chmod and it said access denied for 'root' user. This is very strange. I checked secure log and history and found nothing informative. I have PHP, Ruby On Rails, Java, Wordpress apps running on these server. This time I did a chkrootkit scan and found nothing. I renamed the /etc/ssh folder and reinstalled openssh through yum. I had faced this on 3 instances on CentOS(5.2, 5.4) I have instances on Debian as well those working fine. Is this a CentOS/Rightscale issue. Guys, what security measures I should take to prevent this. Please support me this is very critical. Thanks

  Read the article

• Can I charge USB devices from a powered hub that isn't connected to a PC?

  - by Anodyne

  This will probably sound familiar to most of you... In my home, we have a whole bunch of devices that can be charged via USB (two iPhones, a BlackBerry, an iPod Touch, etc ad nauseam). We also have a bunch of USB chargers, each of which has a single USB port on it. I'd like to have something permanently connected to AC power with at least 4 USB ports on it, so we can just plug devices in and don't need to go looking for a free outlet. So here's the question: if I buy a powered USB hub, will that do the job even if I don't connect it to a PC? Ideally if you have a hub that you can personally verify will be suitable, let me know the manufacturer and model :-) Thanks in advance! EDIT: The solution I eventually went for was this: Kensington 4-Port USB Charger for Mobile Devices (Europe) There's also a US version here: Kensington 4-Port USB Charger for Mobile Devices (USA) It arrived yesterday, so I used it to charge the following devices, all at the same time, overnight last night: 32GB iPhone 3GS 16GB iPhone 3G First-generation iPod Touch Kensington Portable Power Pack for Mobile Devices I can't say anything about the charging speed (as I left it overnight) but all devices were fully charged this morning.

  Read the article

• My nameserver isn't registered?

  - by jflory7

  My problem is that I am trying to set my domain's nameservers to the nameservers of my dedicated server. My domain is hosted by Namecheap, and everytime I try to input the two nameservers for my private server, one of them is rejected for being unregistered. My dedicated server's control panel is managed through Parallels Plesk 11.5, and the nameservers provided to me are one from the actual provider, OVH (sdns1.ovh.ca), and the other is an actual unique nameserver that points directly to my specific dedicated server. Previously, for another domain I own, I was successfully able to get Namecheap to take the nameserver without an error, so I know this is possible. I know that it works for one of my other domains. After being redirected by Namecheap to contact the server provider, I called OVH and they said it was something I would have to do myself. One interesting detail the OVH representative mentioned was that he saw that my port 53 was closed, which is the port that handles DNS. The only problem is that I have no idea or knowledge as how to open this port back up. So, my final question is how can I get this nameserver working in Namecheap to point to my dedicated server? If you need any more details, feel free to ask for clarification.

  Read the article

• Apache: getting proxy, rewrite, and SSL to play nice

  - by Rich M

  Hi, I'm having loads of trouble trying to integrate proxy, rewrite, and SSL altogether in Apache 2. A brief history, my application runs on port 8080 and before adding SSL, I used proxy to strip the 8080 from the url's to and from the server. So instead of www.example.com:8080/myapp, the client app accessed everything via www.example.com/myapp Here was the conf the accomplished this: ProxyRequests Off <Proxy */myapp> Order deny,allow Allow from all </Proxy> ProxyPass /myapp http://www.example.com:8080/myapp ProxyPassReverse /myapp http://www.example.com:8080/myapp What I'm trying to do now is force all requests to myapp to be HTTPS, and then have those SSL requests follow the same proxy rules that strip out the port number as my application used to. Simply changing the ports 8080 to 8443 in the ProxyPass lines does not accomplish this. Unfortunately I'm not an expert in Apache, and my skills of trial and error are already reaching the end of the line. RewriteEngine On RewriteCond %{HTTPS} off RewriteRule myapp/* https://%{HTTP_HOST}%{REQUEST_URI} ProxyRequests Off <Proxy */myapp> Order deny,allow Allow from all </Proxy> SSLProxyEngine on ProxyPass /myapp https://www.example.com:8443/mloyalty ProxyPassReverse /myapp https://www.example.com:8433/mloyalty As this stands, a request to anything on the server other than /myapp load fine with http. If I make a browser http request to /mypp it then redirects to https:// www.example.com:8443/myapp , which is not the desired behavior. Links within the application then resolve to https:// www.example.com/myapp/linkedPage , which is desirable. Browser requests (http and https) to anything one level beyond just /myapp ie. /myapp/mycontext resolve to https:// www.example.com/myapp/mycontext without the port. I'm not sure what other information there is for me to give, but I think my goals should be clear.

  Read the article

< Previous Page | 138 139 140 141 142 143 144 145 146 147 148 149  | Next Page >