Search Results

Search found 15648 results on 626 pages for 'wcf security'.

Page 142/626 | < Previous Page | 138 139 140 141 142 143 144 145 146 147 148 149  | Next Page >

• Entity Framework 4 & WCF Data Service: N:M mapping

  - by JJO

  I have three tables in my database: An A table, a B table, and a many-to-many ABMapping table. For simplicity, A and B are keyed with identity columns; ABMapping has just two columns: AId and BId. I built an Entity Framework 4 model from this, and it did correctly identify the N:M mapping between A and B. I then built a WCF Data Service based on this EF model. I'm trying to consume this WCF Data Service. Unfortunately, I can't figure out how to get a mapping between As and Bs to map back to the database. I've tried something like this: A a = new A(); B b = new B(); a.Bs.Add(b); connection.SaveChanges(); But this doesn't seem to have worked. Any clues? What am I missing?

  Read the article

• Spring security and MySQL under CentOS

  - by user223268

  i'm trying to connect to MySQL using spring security, spring should access the database and check the user and pass using direct sql. the problem is when i use localhost to access my local database nothing happen no exceptions no any thing but login fails. if i changed the host of the server to one of my team machine IP address the program login successfully. the only deference is that i'm using CentOS 6.5 and my team is using Windows. how can i make sure i'm configuring MySQL correctly and what privileges should i grand to my users to be able to finish this. note: i'm a newcomer to linux and MySQL server administration.

  Read the article

• The maximum message size quota for incoming messages (65536) has been exceeded.

  - by DaleyKD

  My WCF Service has an OperationContract that accepts, as a parameter, an array of objects. This can potentially be quite large. After looking for fixes for Bad Request: 400, I found the real reason: the maximum message size. I know this question has been asked before in MANY places. I've tried what everyone says: "Increase the sizes in the client and server config files." I have. It still doesn't work. My Service's web.config: <system.serviceModel> <services> <service name="myService"> <endpoint name="myEndpoint" address="" binding="basicHttpBinding" bindingConfiguration="myBinding" contract="Meisel.WCF.PDFDocs.IPDFDocsService" /> </service> </services> <bindings> <basicHttpBinding> <binding name="myBinding" closeTimeout="00:11:00" openTimeout="00:11:00" receiveTimeout="00:15:00" sendTimeout="00:15:00" maxBufferSize="2147483647" maxReceivedMessageSize="2147483647" maxBufferPoolSize="2147483647" transferMode="Buffered" allowCookies="false" bypassProxyOnLocal="false" hostNameComparisonMode="StrongWildcard" messageEncoding="Text" textEncoding="utf-8" useDefaultWebProxy="true"> <readerQuotas maxDepth="2147483647" maxStringContentLength="2147483647" maxArrayLength="2147483647" maxBytesPerRead="2147483647" maxNameTableCharCount="2147483647" /> <security mode="None" /> </binding> </basicHttpBinding> </bindings> <behaviors> <serviceBehaviors> <behavior> <serviceMetadata httpGetEnabled="true" /> <serviceDebug includeExceptionDetailInFaults="true" /> <dataContractSerializer maxItemsInObjectGraph="2147483647" /> </behavior> </serviceBehaviors> </behaviors> <serviceHostingEnvironment multipleSiteBindingsEnabled="true" /> </system.serviceModel> My Client's app.config: <system.serviceModel> <bindings> <basicHttpBinding> <binding name="BasicHttpBinding_IPDFDocsService" closeTimeout="00:11:00" openTimeout="00:11:00" receiveTimeout="00:10:00" sendTimeout="00:11:00" allowCookies="false" bypassProxyOnLocal="false" hostNameComparisonMode="StrongWildcard" maxBufferSize="2147483647" maxBufferPoolSize="2147483647" maxReceivedMessageSize="2147483647" messageEncoding="Text" textEncoding="utf-8" transferMode="Buffered" useDefaultWebProxy="true"> <readerQuotas maxDepth="32" maxStringContentLength="2147483647" maxArrayLength="2147483647" maxBytesPerRead="2147483647" maxNameTableCharCount="2147483647" /> <security mode="None"> <transport clientCredentialType="None" proxyCredentialType="None" realm="" /> <message clientCredentialType="UserName" algorithmSuite="Default" /> </security> </binding> </basicHttpBinding> </bindings> <client> <endpoint address="http://localhost:8451/PDFDocsService.svc" behaviorConfiguration="MoreItemsInObjectGraph" binding="basicHttpBinding" bindingConfiguration="BasicHttpBinding_IPDFDocsService" contract="PDFDocsService.IPDFDocsService" name="BasicHttpBinding_IPDFDocsService" /> </client> <behaviors> <endpointBehaviors> <behavior name="MoreItemsInObjectGraph"> <dataContractSerializer maxItemsInObjectGraph="2147483647" /> </behavior> </endpointBehaviors> </behaviors> </system.serviceModel> What can I possibly be missing or doing wrong? It's as though the service is ignoring what I typed in the maxReceivedBufferSize. Thanks in advance, Kyle UPDATE Here are two other StackOverflow questions where they never received an answer, either: http://stackoverflow.com/questions/2880623/maxreceivedmessagesize-adjusted-but-still-getting-the-quotaexceedexception-with http://stackoverflow.com/questions/2569715/wcf-maxreceivedmessagesize-property-not-taking

  Read the article

• How to expose MEX when I need the service to have NTLM authentication

  - by Ram Amos

  I'm developing a WCF service that is RESTful and SOAP, now both of them needs to be with NTLM authentication. I also want to expose a MEX endpoint so that others can easily reference the service and work with it. Now when I set IIS to require windows authentication I can use the REST service and make calls to the service succesfully, but when I want to reference the service with SVCUTIL it throws an error that it requires to be anonymous. Here's my web.config: <system.serviceModel> <serviceHostingEnvironment aspNetCompatibilityEnabled="true" multipleSiteBindingsEnabled="true"/> <bindings> <basicHttpBinding> <binding name="basicHttpBinding" maxReceivedMessageSize="214748563" maxBufferSize="214748563" maxBufferPoolSize="214748563"> <security mode="TransportCredentialOnly"> <transport clientCredentialType="Ntlm"> </transport> </security> </binding> </basicHttpBinding> <webHttpBinding> <binding name="webHttpBinding" maxReceivedMessageSize="214748563" maxBufferSize="214748563" maxBufferPoolSize="214748563"> <security mode="TransportCredentialOnly"> <transport clientCredentialType="Ntlm"> </transport> </security> </binding> </webHttpBinding> <mexHttpBinding> <binding name="mexHttpBinding"></binding> </mexHttpBinding> </bindings> <standardEndpoints> <webHttpEndpoint> <standardEndpoint name="" automaticFormatSelectionEnabled="true" helpEnabled="True"> </standardEndpoint> </webHttpEndpoint> </standardEndpoints> <services> <service name="Intel.ResourceScheduler.Service" behaviorConfiguration="Meta"> <clear /> <endpoint address="soap" name="SOAP" binding="basicHttpBinding" contract="Intel.ResourceScheduler.Service.IResourceSchedulerService" listenUriMode="Explicit" /> <endpoint address="" name="rest" binding="webHttpBinding" behaviorConfiguration="REST" contract="Intel.ResourceScheduler.Service.IResourceSchedulerService" /> <endpoint address="mex" name="mex" binding="mexHttpBinding" behaviorConfiguration="" contract="IMetadataExchange" /> </service> </services> <behaviors> <endpointBehaviors> <behavior name="REST"> <webHttp /> </behavior> <behavior name="WCFBehavior"> <dataContractSerializer maxItemsInObjectGraph="2147483647" /> </behavior> </endpointBehaviors> <serviceBehaviors> <behavior name="Meta"> <serviceMetadata httpGetEnabled="true"/> </behavior> <behavior name="REST"> <dataContractSerializer maxItemsInObjectGraph="2147483647" /> </behavior> <behavior name="WCFBehavior"> <serviceMetadata httpGetEnabled="true"/> <dataContractSerializer maxItemsInObjectGraph="2147483647" /> </behavior> <behavior name=""> <!-- To avoid disclosing metadata information, set the value below to false and remove the metadata endpoint above before deployment --> <serviceMetadata httpGetEnabled="true" /> <!-- To receive exception details in faults for debugging purposes, set the value below to true. Set to false before deployment to avoid disclosing exception information --> <serviceDebug includeExceptionDetailInFaults="false" /> </behavior> </serviceBehaviors> </behaviors> Any help will be appreciated.

  Read the article

• Spring Security beginner's question. Build failed

  - by Nitesh Panchal

  Hello, I downloaded all jar files for Spring Security 3.0 and added them to my lib folder in Netbeans 6.8. Then i added Spring framework to my web application and tried to modify applicationContext.xml as given in the pdf that shipped with Spring Security. This is it's code :- <?xml version="1.0" encoding="UTF-8"?> <beans xmlns="http://www.springframework.org/schema/beans" xmlns:security="http://www.springframework.org/schema/security" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-3.0.xsd http://www.springframework.org/schema/security http://www.springframework.org/schema/security/spring-security-3.0.xsd"> <http auto-config='true'> <intercept-url pattern="/**" access="ROLE_USER" /> </http> <authentication-manager> <authentication-provider> <user-service> <user name="jimi" password="jimispassword" authorities="ROLE_USER, ROLE_ADMIN" /> <user name="bob" password="bobspassword" authorities="ROLE_USER" /> </user-service> </authentication-provider> </authentication-manager> <!--bean id="propertyConfigurer" class="org.springframework.beans.factory.config.PropertyPlaceholderConfigurer" p:location="/WEB-INF/jdbc.properties" /> <bean id="dataSource" class="org.springframework.jdbc.datasource.DriverManagerDataSource" p:driverClassName="${jdbc.driverClassName}" p:url="${jdbc.url}" p:username="${jdbc.username}" p:password="${jdbc.password}" /--> <!-- ADD PERSISTENCE SUPPORT HERE (jpa, hibernate, etc) --> </beans> This is my web.xml :- <?xml version="1.0" encoding="UTF-8"?> <web-app version="3.0" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_3_0.xsd"> <listener> <listener-class>org.springframework.web.context.ContextLoaderListener</listener-class> </listener> <servlet> <servlet-name>dispatcher</servlet-name> <servlet-class>org.springframework.web.servlet.DispatcherServlet</servlet-class> <load-on-startup>2</load-on-startup> </servlet> <servlet-mapping> <servlet-name>dispatcher</servlet-name> <url-pattern>*.htm</url-pattern> </servlet-mapping> <session-config> <session-timeout> 30 </session-timeout> </session-config> <context-param> <param-name>contextConfigLocation</param-name> <param-value>/WEB-INF/applicationContext.xml</param-value> </context-param> <listener> <listener-class> org.springframework.web.context.ContextLoaderListener </listener-class> </listener> <listener> <listener-class> org.springframework.web.context.request.RequestContextListener </listener-class> </listener> <filter> <filter-name>springSecurityFilterChain</filter-name> <filter-class>org.springframework.web.filter.DelegatingFilterProxy</filter-class> </filter> <filter-mapping> <filter-name>springSecurityFilterChain</filter-name> <url-pattern>/*</url-pattern> </filter-mapping> <welcome-file-list> <welcome-file>redirect.jsp</welcome-file> </welcome-file-list> </web-app> My web application doesn't compile. I simply keep getting build failed. This is the stacktrace :- INFO: PWC1412: WebModule[/SpringSecurityDemo] ServletContext.log():Initializing Spring root WebApplicationContext INFO: Root WebApplicationContext: initialization started INFO: Refreshing org.springframework.web.context.support.XmlWebApplicationContext@108026d: display name [Root WebApplicationContext]; startup date [Mon Mar 22 18:23:37 PDT 2010]; root of context hierarchy INFO: Loading XML bean definitions from ServletContext resource [/WEB-INF/applicationContext.xml] SEVERE: Context initialization failed org.springframework.beans.factory.xml.XmlBeanDefinitionStoreException: Line 11 in XML document from ServletContext resource [/WEB-INF/applicationContext.xml] is invalid; nested exception is org.xml.sax.SAXParseException: cvc-complex-type.2.4.a: Invalid content was found starting with element 'http'. One of '{"http://www.springframework.org/schema/beans":description, "http://www.springframework.org/schema/beans":import, "http://www.springframework.org/schema/beans":alias, "http://www.springframework.org/schema/beans":bean, WC[##other:"http://www.springframework.org/schema/beans"]}' is expected. at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.doLoadBeanDefinitions(XmlBeanDefinitionReader.java:369) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBeanDefinitions(XmlBeanDefinitionReader.java:313) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBeanDefinitions(XmlBeanDefinitionReader.java:290) at org.springframework.beans.factory.support.AbstractBeanDefinitionReader.loadBeanDefinitions(AbstractBeanDefinitionReader.java:142) at org.springframework.beans.factory.support.AbstractBeanDefinitionReader.loadBeanDefinitions(AbstractBeanDefinitionReader.java:158) at org.springframework.web.context.support.XmlWebApplicationContext.loadBeanDefinitions(XmlWebApplicationContext.java:124) at org.springframework.web.context.support.XmlWebApplicationContext.loadBeanDefinitions(XmlWebApplicationContext.java:92) at org.springframework.context.support.AbstractRefreshableApplicationContext.refreshBeanFactory(AbstractRefreshableApplicationContext.java:97) at org.springframework.context.support.AbstractApplicationContext.obtainFreshBeanFactory(AbstractApplicationContext.java:411) at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:338) at org.springframework.web.context.ContextLoader.createWebApplicationContext(ContextLoader.java:251) at org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:190) at org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:45) at org.apache.catalina.core.StandardContext.contextListenerStart(StandardContext.java:4591) at com.sun.enterprise.web.WebModule.contextListenerStart(WebModule.java:535) at org.apache.catalina.core.StandardContext.start(StandardContext.java:5193) at com.sun.enterprise.web.WebModule.start(WebModule.java:499) at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:928) at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:912) at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:694) at com.sun.enterprise.web.WebContainer.loadWebModule(WebContainer.java:1933) at com.sun.enterprise.web.WebContainer.loadWebModule(WebContainer.java:1605) at com.sun.enterprise.web.WebApplication.start(WebApplication.java:90) at org.glassfish.internal.data.EngineRef.start(EngineRef.java:126) at org.glassfish.internal.data.ModuleInfo.start(ModuleInfo.java:241) at org.glassfish.internal.data.ApplicationInfo.start(ApplicationInfo.java:236) at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:339) at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:183) at org.glassfish.deployment.admin.DeployCommand.execute(DeployCommand.java:272) at com.sun.enterprise.v3.admin.CommandRunnerImpl$1.execute(CommandRunnerImpl.java:305) at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:320) at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:1176) at com.sun.enterprise.v3.admin.CommandRunnerImpl.access$900(CommandRunnerImpl.java:83) at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1235) at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1224) at com.sun.enterprise.v3.admin.AdminAdapter.doCommand(AdminAdapter.java:365) at com.sun.enterprise.v3.admin.AdminAdapter.service(AdminAdapter.java:204) at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:166) at com.sun.enterprise.v3.server.HK2Dispatcher.dispath(HK2Dispatcher.java:100) at com.sun.enterprise.v3.services.impl.ContainerMapper.service(ContainerMapper.java:245) at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:791) at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:693) at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:954) at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:170) at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:135) at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:102) at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:88) at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:76) at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:53) at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:57) at com.sun.grizzly.ContextTask.run(ContextTask.java:69) at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:330) at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool.java:309) at java.lang.Thread.run(Thread.java:619) Caused by: org.xml.sax.SAXParseException: cvc-complex-type.2.4.a: Invalid content was found starting with element 'http'. One of '{"http://www.springframework.org/schema/beans":description, "http://www.springframework.org/schema/beans":import, "http://www.springframework.org/schema/beans":alias, "http://www.springframework.org/schema/beans":bean, WC[##other:"http://www.springframework.org/schema/beans"]}' is expected. at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException(ErrorHandlerWrapper.java:195) at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.error(ErrorHandlerWrapper.java:131) at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(XMLErrorReporter.java:384) at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(XMLErrorReporter.java:318) at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator$XSIErrorReporter.reportError(XMLSchemaValidator.java:410) at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.reportSchemaError(XMLSchemaValidator.java:3165) at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.handleStartElement(XMLSchemaValidator.java:1777) at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.startElement(XMLSchemaValidator.java:685) at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.scanStartElement(XMLNSDocumentScannerImpl.java:400) at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDriver.next(XMLDocumentFragmentScannerImpl.java:2747) at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(XMLDocumentScannerImpl.java:648) at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next(XMLNSDocumentScannerImpl.java:140) at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDocumentFragmentScannerImpl.java:510) at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:807) at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:737) at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:107) at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse(DOMParser.java:225) at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:283) at org.springframework.beans.factory.xml.DefaultDocumentLoader.loadDocument(DefaultDocumentLoader.java:78) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.doLoadBeanDefinitions(XmlBeanDefinitionReader.java:361) ... 53 more SEVERE: PWC1306: Startup of context /SpringSecurityDemo failed due to previous errors SEVERE: PWC1305: Exception during cleanup after start failed org.apache.catalina.LifecycleException: PWC2769: Manager has not yet been started at org.apache.catalina.session.StandardManager.stop(StandardManager.java:892) at org.apache.catalina.core.StandardContext.stop(StandardContext.java:5383) at com.sun.enterprise.web.WebModule.stop(WebModule.java:530) at org.apache.catalina.core.StandardContext.start(StandardContext.java:5211) at com.sun.enterprise.web.WebModule.start(WebModule.java:499) at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:928) at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:912) at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:694) at com.sun.enterprise.web.WebContainer.loadWebModule(WebContainer.java:1933) at com.sun.enterprise.web.WebContainer.loadWebModule(WebContainer.java:1605) at com.sun.enterprise.web.WebApplication.start(WebApplication.java:90) at org.glassfish.internal.data.EngineRef.start(EngineRef.java:126) at org.glassfish.internal.data.ModuleInfo.start(ModuleInfo.java:241) at org.glassfish.internal.data.ApplicationInfo.start(ApplicationInfo.java:236) at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:339) at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:183) at org.glassfish.deployment.admin.DeployCommand.execute(DeployCommand.java:272) at com.sun.enterprise.v3.admin.CommandRunnerImpl$1.execute(CommandRunnerImpl.java:305) at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:320) at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:1176) at com.sun.enterprise.v3.admin.CommandRunnerImpl.access$900(CommandRunnerImpl.java:83) at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1235) at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1224) at com.sun.enterprise.v3.admin.AdminAdapter.doCommand(AdminAdapter.java:365) at com.sun.enterprise.v3.admin.AdminAdapter.service(AdminAdapter.java:204) at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:166) at com.sun.enterprise.v3.server.HK2Dispatcher.dispath(HK2Dispatcher.java:100) at com.sun.enterprise.v3.services.impl.ContainerMapper.service(ContainerMapper.java:245) at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:791) at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:693) at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:954) at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:170) at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:135) at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:102) at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:88) at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:76) at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:53) at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:57) at com.sun.grizzly.ContextTask.run(ContextTask.java:69) at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:330) at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool.java:309) at java.lang.Thread.run(Thread.java:619) SEVERE: ContainerBase.addChild: start: org.apache.catalina.LifecycleException: org.springframework.beans.factory.xml.XmlBeanDefinitionStoreException: Line 11 in XML document from ServletContext resource [/WEB-INF/applicationContext.xml] is invalid; nested exception is org.xml.sax.SAXParseException: cvc-complex-type.2.4.a: Invalid content was found starting with element 'http'. One of '{"http://www.springframework.org/schema/beans":description, "http://www.springframework.org/schema/beans":import, "http://www.springframework.org/schema/beans":alias, "http://www.springframework.org/schema/beans":bean, WC[##other:"http://www.springframework.org/schema/beans"]}' is expected. at org.apache.catalina.core.StandardContext.start(StandardContext.java:5216) at com.sun.enterprise.web.WebModule.start(WebModule.java:499) at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:928) at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:912) at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:694) at com.sun.enterprise.web.WebContainer.loadWebModule(WebContainer.java:1933) at com.sun.enterprise.web.WebContainer.loadWebModule(WebContainer.java:1605) at com.sun.enterprise.web.WebApplication.start(WebApplication.java:90) at org.glassfish.internal.data.EngineRef.start(EngineRef.java:126) at org.glassfish.internal.data.ModuleInfo.start(ModuleInfo.java:241) at org.glassfish.internal.data.ApplicationInfo.start(ApplicationInfo.java:236) at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:339) at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:183) at org.glassfish.deployment.admin.DeployCommand.execute(DeployCommand.java:272) at com.sun.enterprise.v3.admin.CommandRunnerImpl$1.execute(CommandRunnerImpl.java:305) at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:320) at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:1176) at com.sun.enterprise.v3.admin.CommandRunnerImpl.access$900(CommandRunnerImpl.java:83) at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1235) at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1224) at com.sun.enterprise.v3.admin.AdminAdapter.doCommand(AdminAdapter.java:365) at com.sun.enterprise.v3.admin.AdminAdapter.service(AdminAdapter.java:204) at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:166) at com.sun.enterprise.v3.server.HK2Dispatcher.dispath(HK2Dispatcher.java:100) at com.sun.enterprise.v3.services.impl.ContainerMapper.service(ContainerMapper.java:245) at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:791) at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:693) at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:954) at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:170) at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:135) at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:102) at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:88) at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:76) at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:53) at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:57) at com.sun.grizzly.ContextTask.run(ContextTask.java:69) at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:330) at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool.java:309) at java.lang.Thread.run(Thread.java:619) Caused by: org.springframework.beans.factory.xml.XmlBeanDefinitionStoreException: Line 11 in XML document from ServletContext resource [/WEB-INF/applicationContext.xml] is invalid; nested exception is org.xml.sax.SAXParseException: cvc-complex-type.2.4.a: Invalid content was found starting with element 'http'. One of '{"http://www.springframework.org/schema/beans":description, "http://www.springframework.org/schema/beans":import, "http://www.springframework.org/schema/beans":alias, "http://www.springframework.org/schema/beans":bean, WC[##other:"http://www.springframework.org/schema/beans"]}' is expected. at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.doLoadBeanDefinitions(XmlBeanDefinitionReader.java:369) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBeanDefinitions(XmlBeanDefinitionReader.java:313) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBeanDefinitions(XmlBeanDefinitionReader.java:290) at org.springframework.beans.factory.support.AbstractBeanDefinitionReader.loadBeanDefinitions(AbstractBeanDefinitionReader.java:142) at org.springframework.beans.factory.support.AbstractBeanDefinitionReader.loadBeanDefinitions(AbstractBeanDefinitionReader.java:158) at org.springframework.web.context.support.XmlWebApplicationContext.loadBeanDefinitions(XmlWebApplicationContext.java:124) at org.springframework.web.context.support.XmlWebApplicationContext.loadBeanDefinitions(XmlWebApplicationContext.java:92) at org.springframework.context.support.AbstractRefreshableApplicationContext.refreshBeanFactory(AbstractRefreshableApplicationContext.java:97) at org.springframework.context.support.AbstractApplicationContext.obtainFreshBeanFactory(AbstractApplicationContext.java:411) at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:338) at org.springframework.web.context.ContextLoader.createWebApplicationContext(ContextLoader.java:251) at org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:190) at org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:45) at org.apache.catalina.core.StandardContext.contextListenerStart(StandardContext.java:4591) at com.sun.enterprise.web.WebModule.contextListenerStart(WebModule.java:535) at org.apache.catalina.core.StandardContext.start(StandardContext.java:5193) ... 38 more Caused by: org.xml.sax.SAXParseException: cvc-complex-type.2.4.a: Invalid content was found starting with element 'http'. One of '{"http://www.springframework.org/schema/beans":description, "http://www.springframework.org/schema/beans":import, "http://www.springframework.org/schema/beans":alias, "http://www.springframework.org/schema/beans":bean, WC[##other:"http://www.springframework.org/schema/beans"]}' is expected. at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException(ErrorHandlerWrapper.java:195) at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.error(ErrorHandlerWrapper.java:131) at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(XMLErrorReporter.java:384) at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(XMLErrorReporter.java:318) at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator$XSIErrorReporter.reportError(XMLSchemaValidator.java:410) at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.reportSchemaError(XMLSchemaValidator.java:3165) at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.handleStartElement(XMLSchemaValidator.java:1777) at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.startElement(XMLSchemaValidator.java:685) at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.scanStartElement(XMLNSDocumentScannerImpl.java:400) at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDriver.next(XMLDocumentFragmentScannerImpl.java:2747) at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(XMLDocumentScannerImpl.java:648) at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next(XMLNSDocumentScannerImpl.java:140) at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDocumentFragmentScannerImpl.java:510) at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:807) at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:737) at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:107) at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse(DOMParser.java:225) at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:283) at org.springframework.beans.factory.xml.DefaultDocumentLoader.loadDocument(DefaultDocumentLoader.java:78) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.doLoadBeanDefinitions(XmlBeanDefinitionReader.java:361) ... 53 more

  Read the article

• Most secure way to access my home Linux server while I am on the road? Specialized solution wanted

  - by Ace Paus

  I think many people may be in my situation. I travel on business with a laptop. And I need secure access to files from the office (which in my case is my home). The short version of my question: How can I make SSH/SFTP really secure when only one person needs to connect to the server from one laptop? In this situation, what special steps would make it almost impossible for anyone else to get online access to the server? A lot more details: I use Ubuntu Linux on both my laptop (KDE) and my home/office server. Connectivity is not a problem. I can tether to my phone's connection if needed. I need access to a large number of files (around 300 GB). I don't need all of them at once, but I don't know in advance which files I might need. These files contain confidential client info and personal info such as credit card numbers, so they must be secure. Given this, I don't want store all these files on Dropbox or Amazon AWS, or similar. I couldn't justify that cost anyway (Dropbox don't even publish prices for plans above 100 GB, and security is a concern). However, I am willing to spend some money on a proper solution. A VPN service, for example, might be part of the solution? Or other commercial services? I've heard about PogoPlug, but I don't know if there is a similar service that might address my security concerns? I could copy all my files to my laptop because it has the space. But then I have to sync between my home computer and my laptop and I found in the past that I'm not very good about doing this. And if my laptop is lost or stolen, my data would be on it. The laptop drive is an SSD and encryption solutions for SSD drives are not good. Therefore, it seems best to keep all my data on my Linux file server (which is safe at home). Is that a reasonable conclusion, or is anything connected to the Internet such a risk that I should just copy the data to the laptop (and maybe replace the SSD with an HDD, which reduces battery life and performance)? I view the risks of losing a laptop to be higher. I am not an obvious hacking target online. My home broadband is cable Internet, and it seems very reliable. So I want to know the best (reasonable) way to securely access my data (from my laptop) while on the road. I only need to access it from this one computer, although I may connect from either my phone's 3G/4G or via WiFi or some client's broadband, etc. So I won't know in advance which IP address I'll have. I am leaning toward a solution based on SSH and SFTP (or similar). SSH/SFTP would provided about all the functionality I anticipate needing. I would like to use SFTP and Dolphin to browse and download files. I'll use SSH and the terminal for anything else. My Linux file server is set up with OpenSSH. I think I have SSH relatively secured. I'm using Denyhosts too. But I want to go several steps further. I want to get the chances that anyone can get into my server as close to zero as possible while still allowing me to get access from the road. I'm not a sysadmin or programmer or real "superuser". I have to spend most of my time doing other things. I've heard about "port knocking" but I have never used it and I don't know how to implement it (although I'm willing to learn). I have already read a number of articles with titles such as: Top 20 OpenSSH Server Best Security Practices 20 Linux Server Hardening Security Tips Debian Linux Stop SSH User Hacking / Cracking Attacks with DenyHosts Software more... I have not implemented every single thing I've read about. I probably can't do that. But maybe there is something even better I can do in my situation because I only need access from a single laptop. I'm just one user. My server does not need to be accessible to the general public. Given all these facts, I'm hoping I can get some suggestions here that are within my capability to implement and that leverage these facts to create a great deal better security than general purpose suggestions in the articles above.

  Read the article

• JQuery Json error: Object doesn't support this property or method

  - by Abu Hamzah

  ERROR: Microsoft JScript runtime error: Object doesn't support this property or method i am using WCF service to pull the data and its very simple for the purpose of test and it does returning me the data from wcf service but it fails on json2.js on line number 314-316 // We split the first stage into 4 regexp operations in order to work around // crippling inefficiencies in IE's and Safari's regexp engines. First we // replace all backslash pairs with '@' (a non-JSON character). Second, we // replace all simple value tokens with ']' characters. Third, we delete all // open brackets that follow a colon or comma or that begin the text. Finally, // we look to see that the remaining characters are only whitespace or ']' or // ',' or ':' or '{' or '}'. If that is so, then the text is safe for eval. if (/^[\],:{}\s]*$/.test(text.replace(/\\["\\\/bfnrtu]/g, '@'). replace(/"[^"\\\n\r]*"|true|false|null|-?\d+(?:\.\d*)?(?:[eE][+\-]?\d+)?/g, ']'). replace(/(?:^|:|,)(?:\s*\[)+/g, ''))) { here is what i am doing function serviceProxy(wjOrderServiceURL) { var _I = this; this.ServiceURL = wjOrderServiceURL; // *** Call a wrapped object this.invoke = function (options) { // Default settings var settings = { serviceMethod: '', data: null, callback: null, error: null, type: "POST", processData: false, contentType: "application/json", dataType: "text", bare: false }; if (options) { $.extend(settings, options); } function GetFederalHolidays() { $("#dContacts1").empty().html('Searching for Active Contacts...'); ContactServiceProxy.invoke({ serviceMethod: "Holidays", callback: function (response) { // ProcessActiveContacts1(response); debugger }, error: function (xhr, errorMsg, thrown) { postErrorAndUnBlockUI(xhr, errorMsg, thrown); } }); } any help what iam doing wrong? i try to change from dataType: text to json but i get the same error above.

  Read the article

• Forms authentication in Silverlight

  - by Matt

  I have a website using forms authentication. Everything runs sweet their. I've got a Silverlight app that uses Duplex messaging to talk to a WCF service. I'd like to be able to authenticate users in my service. I realize that by doing this <serviceHostingEnvironment aspNetCompatibilityEnabled="true" /> that my service would then have access to the HttpContext.Current context and I could easily authenticate a user. But herein lies the problem. aspNetCompatibilityEnabled="true" combined with Duplex messaging results in very, very, very slow communication between silverlight and the website (10 seconds or more). Unless I have a configuration wrong, I'm going to assume that this is a bug in WCF / Silverlight. So basically I'm looking for a workaround. One idea I wanted to try was to read the ASPSESSID cookie from the browser and send that value over the wire. But I don't know what to do with the cookie on the service side. Is there some way to authenticate a user by sending their cookie data over duplex messaging?

  Read the article

• Using HttpClient with the RightScale API

  - by Ameer Deen

  I'm trying to use the WCF Rest Starter Kit with the RightScale's Login API which seems fairly simple to use. Edit - Here's a blog entry I wrote on using Powershell to consume the API. Edit - Created a generic .NET wrapper for the RightScale API - NRightAPI It's exactly as simple as it looks while using CURL. In order for me to obtain a login cookie all I need to do is: curl -v -c rightcookie -u username:password "https://my.rightscale.com/api/acct/accountid/login?api_version=1.0" And I receive the following cookie: HTTP/1.1 204 No Content Date: Fri, 25 Dec 2009 12:29:24 GMT Server: Mongrel 1.1.3 Status: 204 No Content X-Runtime: 0.06121 Content-Type: text/html; charset=utf-8 Content-Length: 0 Cache-Control: no-cache Added cookie _session_id="488a8d9493579b9473fbcfb94b3a7b8e5e3" for domain my.rightscale.com, path /, expire 0 Set-Cookie: _session_id=488a8d9493579b9473fbcfb94b3a7b8e5e3; path=/; secure Vary: Accept-Encoding However, when I use the following C# code: HttpClient http = new HttpClient("https://my.rightscale.com/api/accountid/login?api_version=1.0"); http.TransportSettings.UseDefaultCredentials = false; http.TransportSettings.MaximumAutomaticRedirections = 0; http.TransportSettings.Credentials = new NetworkCredential("username", "password"); Console.WriteLine(http.Get().Content.ReadAsString()); Instead of a HTTP 204, I get a redirect: You are being <a> href="https://my.rightscale.com/dashboard"redirected <a> How do I get the WCF REST starter kit working with the RighScale API ?

  Read the article

• DomainContext class is not created in a RIA services class library solution

  - by Konamiman

  I have created a RIA services class library project and things are not going as I expected. The problem is that when I add domain service classes to the server project, the corresponding domain context classes are not generated on the client project. I start by creating a new project of type WCF RIA services class library. The generated solution has two projects: RIAServicesLibrary1 (the Silverlight class library project) and RIAServicesLibrary1.Web (the class library that will hold the services). Then I add a new project item to RIAServicesLibrary1.Web of type DomainServiceClass. I add a sample method so that the resulting class code is: namespace RIAServicesLibrary1.Web { using System; using System.Collections.Generic; using System.ComponentModel; using System.ComponentModel.DataAnnotations; using System.Linq; using System.ServiceModel.DomainServices.Hosting; using System.ServiceModel.DomainServices.Server; // TODO: Create methods containing your application logic. [EnableClientAccess()] public class DomainService1 : DomainService { [Invoke] void DoSomething() { } } } Then I generate the whole solution and... nothing happens on the client project. The Generated_Code folder is empty, and the domain context object for the service is not here. Funny enough, if I add a new item of type Authentication domain service, it works as expected: the file RIAServicesLibrary1.Web.g.cs is created on the client project, containing the AuthenticationDomainService1 class as expected. So what's happening here? Am I doing something wrong? Note: I am using Visual Studio 2010 Ultimate RTM and WCF RIA services 1.0.

  Read the article

• DataContract Known Types - passing array

  - by Erup

  Im having problems when passing an generic List, trough a WCF operation. In this case, there is a List of int. The example 4 is described here in MSDN. Note that in MSDN sample, is described: // This will serialize and deserialize successfully because the generic List is equivalent to int[], which was added to known types. Above, is the DataContract: [DataContract] [KnownType(typeof(int[]))] [KnownType(typeof(object[]))] public class AccountData { [DataMember] public object accNumber1; [DataMember] public object accNumber2; [DataMember] public object accNumber3; [DataMember] public object accNumber4; } In client side, Im calling the operation like this: DataTransfer.Service.AccountData data = new DataTransfer.Service.AccountData() { accNumber1 = 100, accNumber2 = new int[100], accNumber3 = new List<int>(), accNumber4 = new ArrayList() }; cService.AddAccounts(data); Also, here is the decorations of the generated AccountData obj (WCF proxy): [System.Diagnostics.DebuggerStepThroughAttribute()] [System.CodeDom.Compiler.GeneratedCodeAttribute("System.Runtime.Serialization", "3.0.0.0")] [System.Runtime.Serialization.DataContractAttribute(Name="AccountData", Namespace="http://schemas.datacontract.org/2004/07/DataTransfer.Service")] [System.SerializableAttribute()] [System.Runtime.Serialization.KnownTypeAttribute(typeof(DataTransfer.Client.CustomerServiceReference.PurchaseOrder))] [System.Runtime.Serialization.KnownTypeAttribute(typeof(DataTransfer.Client.CustomerServiceReference.Customer))] [System.Runtime.Serialization.KnownTypeAttribute(typeof(int[]))] [System.Runtime.Serialization.KnownTypeAttribute(typeof(object[]))]

  Read the article

• Generic object to object mapping with parametrized constructor

  - by Rody van Sambeek

  I have a data access layer which returns an IDataRecord. I have a WCF service that serves DataContracts (dto's). These DataContracts are initiated by a parametrized constructor containing the IDataRecord as follows: [DataContract] public class DataContractItem { [DataMember] public int ID; [DataMember] public string Title; public DataContractItem(IDataRecord record) { this.ID = Convert.ToInt32(record["ID"]); this.Title = record["title"].ToString(); } } Unfortanately I can't change the DAL, so I'm obliged to work with the IDataRecord as input. But in generat this works very well. The mappings are pretty simple most of the time, sometimes they are a bit more complex, but no rocket science. However, now I'd like to be able to use generics to instantiate the different DataContracts to simplify the WCF service methods. I want to be able to do something like: public T DoSomething<T>(IDataRecord record) { ... return new T(record); } So I'd tried to following solutions: Use a generic typed interface with a constructor. doesn't work: ofcourse we can't define a constructor in an interface Use a static method to instantiate the DataContract and create a typed interface containing this static method. doesn't work: ofcourse we can't define a static method in an interface Use a generic typed interface containing the new() constraint doesn't work: new() constraint cannot contain a parameter (the IDataRecord) Using a factory object to perform the mapping based on the DataContract Type. does work, but: not very clean, because I now have a switch statement with all mappings in one file. I can't find a real clean solution for this. Can somebody shed a light on this for me? The project is too small for any complex mapping techniques and too large for a "switch-based" factory implementation.

  Read the article

• Strange Problem with Webservice and IIS

  - by Rene

  Hello there, I have a Problem which confuses me a little bit, resp. where I don't have any Idea about what it could be. The System I'm using is Windows Vista, IIS 7.0, VS2008, Windows Software Factory, Entity Framework, WCF. The Binding for all Webservices is wshttpbinding. I'm using a Webservice hosted in IIS. This Webservice uses/calls another Webservice (also installed in the IIS). If I use a client calling the first Webservice (which calls the second Webservice) it works fine for about 4-10 Times. And then (it is repeatable to get this Problem, but sometimes it happens after 4, sometimes after 10 Time, but it always will happen), the Service and the IIS gets stuck. Stuck means, that this Webservice isn't callable anymore and generates an timeout after 1 minute. Even increasing Timeout doesn't change anything. If i try to restart the IIS I get an timeout error. So the IIS is also "stuck" (it is not really stuck, but I can't restart it). Only if I kill the w3wp.exe IIS is restartable and the Webservice will work again (until i again call this service several times). The logfiles (i'm no expert in things like logging or where to find/enable such logs, so to say : i'm a newbie) like http-logging, Event Viewer or WCF-Message Logging don't show any hints upon the source of the problem. I don't have this problem when I'm using a Webservice which doesn't call another Service. Calling a Webservice is done by Service Reference (I'm using no Proxy-Classes), but I think this should be no Problem. I have no idea of what is happening, nor how to solve this Problem. Regards Rene

  Read the article

• How do I use HttpWebRequest GET method w/ ContentType="application/json"

  - by Stephen Patten

  Hello, This one is real simple, run this Silverlight4 example with the ContentType property commented out and you'll get back a response from from my service in xml. Now uncomment the property and run it and you'll get an ProtocolViolationException, what should happen is the service returns JSON formatted data. HttpWebRequest wreq = (HttpWebRequest)WebRequestCreator.ClientHttp.Create(new Uri("http://stephenpattenconsulting.com/Services/GetFoodDescriptionsLookup(2100)")); //wreq.ContentType = "application/json"; wreq.BeginGetResponse((cb) => { HttpWebRequest rq = cb.AsyncState as HttpWebRequest; HttpWebResponse resp = rq.EndGetResponse(cb) as HttpWebResponse; // Exception StreamReader rdr = new StreamReader(resp.GetResponseStream()); string result = rdr.ReadToEnd(); rdr.Close(); }, wreq); EDIT: While perusing SO, I noticed similar posts, like this one Why am I getting ProtocolViolationException when trying to use HttpWebRequest? and this one How do I use HttpWebRequest with GET method EDIT: The WCF 4 end point is 'adapted' from this link http://geekswithblogs.net/michelotti/archive/2010/08/21/restful-wcf-services-with-no-svc-file-and-no-config.aspx. I can use Fiddler's request builder to to construct the proper requests and changing the content type does yield the correct results.

  Read the article

• Close TCP connection when owner process is already killed

  - by Otiel

  I have a Windows service that - when it starts - opens some WCF services to listen on the 8000 port. It happens that this service crashes sometimes. When it does, the TCP connection is not released, thus causing my service to throw an exception if I try to start it again: AddressAlreadyInUseException: There is already a listener on IP endpoint 0.0.0.0:8000 Some observations: When running CurrPorts or netstat -ano, I can see that the 8000 port is still in use (in LISTENING state) and is owned by the Process ID XXX that corresponded to my service process ID. But my service has already crashed, and does not appear in the Task Manager anymore. Thus I can't kill the process to free the port! Of course, running taskkill /PID XXX returns: ERROR: The process "XXX" not found. When running CurrPorts or netstat -b, I can see that the process name involved in creating the listening port is System, and not as MyService.exe (whereas it is MyService.exe when my service is running). I tried to use CurrPorts to close the connection, but I always get the following error message: Failed to close one or more TCP connections. Be aware that you must run this tool as admin in order to close TCP connections. (Useless to say, I do run CurrPorts as Administrator...) TCPView is not much help either: the process name associated to the 8000 port is <non-existent>, and doing "End process" or "Close connection" has no effect. I tried to see if there was not a child process associated with the PID XXX using Process Explorer, but no luck here. If I close my service properly (before it crashes), the TCP connection is correctly released. This is normal, as I close the WCF service hosts in the OnStop() event of my service. The only way I found to release the connection is to restart the server (which is not convenient in a production environment as you can guess). Waiting does not help, the TCP connection is never released. How can I close the connection without restarting the Windows server? PS: found some questions extremely similar to mine.

  Read the article

• Cache data in SQL CE database

  - by user93422

  Background I have an SQL CE database, that is constantly updated (every second). I have a (web) application that allows a user to look at the data in real-time. At some point a user can click "take a snapshot" button, and it will open the snapshot in a different window. And then on that form, there is "print" and "download" buttons that will either generate a page for printing, or will stream the data as CSV file - but same data snapshot has to be used, i.e. I can't go to the DB to get latest data for that. Details SQL CE dabatase is exposed through WCF web service. Snapshot consists of up to 500 records, 10 columns each. Expiration time on the snapshot of 2 hours is sufficient. It is a low-traffic application, so I don't expect more than few (5) connections at the same time. Loosing snapshot is not a big deal, user can simply generate new one. database is accessed by self-hosted WCF web service using Linq-to-SQL. Web site is ASP.NET MVC hosted on UltiDev Cassini. database, and web site are most likely be on the same box, when deployed. The entire app is intranet bound. Problem I need to cache the snapshot of the data at the moment user pressed "take a snapshot" button, so that I can use same data to generate print page, or generate a file for download. Solution 1: Each time there is a need to generate a snapshot, I will create a table in the database. Since there are no temp tables in SQL CE, I will need to clean it up myself. Solution 2: Cache the snapshot in-memory on either DB server, or web server. Question: Is there anything wrong with proposed solutions? Any different solution suggestions?

  Read the article

• wsdl xml parsing , maxlength problem after encoding of text

  - by MichaelD

  We are working together with another firm. our application communicates with the other application through WCF on our side and a custom implemented java wsdl handler on the other side. They specify the wsdl format and one of the rules is that a specific string cannot contain more then 15 characters. (normally it's 60, but i take 15 for easy example reasons) When we try to send the following string to them we get an error that the string is too long according to the wsdl: "example & test" this is a string of 14 characters, so it should be allowed the microsoft wcf parser translates this to "example &amp; test" . This encoded string is 18 characters long. Now what is the standaard behavior to check a maxlength defined in a message? Is it the encoded message or the decoded message? I would think it's the decoded message , but i ain't sure. If it is the encoded message, how should we handle this so we would know how we have to split the string?

  Read the article

• There was no endpoint listening at net.pipe://localhost/...

  - by virsum

  I have two WCF services hosted in a single Windows Service on a Windows Server 2003 machine. If the Windows service needs to access either of the WCF services (like when a timed event occurs), it uses one of the five named pipe endpoints exposed (different service contracts). The service also exposes HTTP MetadataExchange endpoints for each of the two services, and net.tcp endpoints for consumers external to the server. Usually things work great, but every once in a while I get an error message that looks something like this: System.ServiceModel.EndpointNotFoundException: There was no endpoint listening at net.pipe://localhost/IPDailyProcessing that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details. --- System.IO.PipeException: The pipe endpoint 'net.pipe://localhost/IPDailyProcessing' could not be found on your local machine. --- End of inner exception stack trace --- Server stack trace: at System.ServiceModel.Channels.PipeConnectionInitiator.GetPipeName(Uri uri) at System.ServiceModel.Channels.NamedPipeConnectionPoolRegistry.NamedPipeConnectionPool.GetPoolKey(EndpointAddress address, Uri via) at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout) at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout) at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout) at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannel.CallOpenOnce.System.ServiceModel.Channels.ServiceChannel.ICallOnce.Call(ServiceChannel channel, TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade) at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs) at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation) at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) It doesn't happen reliably, which is maddening because I can't repeat it when I want to. In my windows service I also have some timed events and some file listeners, but these are fairly infrequent events. Does anyone have any ideas why I might be encountering an issue? Any help would be greatly appreciated.

  Read the article

• Doing a POST to a Service Operation in ADO.NET data services

  - by DataServices123

  Is it possible to POST to a service operation defined in an ADO.NET data service (it is decorated with WebInvoke)? I had no problem calling the service operation as an HTTP GET. However, when I switched to doing a POST, the stack trace consistently comes back with "Parameter cannot be NULL". I am using the jQuery syntax below, and sending the POST as JSON (though I'm not including the $.ajax call, the parameter names line up exactly). It would be possible to try this with WCF, as opposed to ADO.NET data services (newly renamed as WCF data services). However, my preference would be to use this approach first. I have tried this with and without the stringify method. Most examples online only show how to use a POST to entities (i.e. for handling CRUD operations). However, in this case we are POSTing to a Service Operation. function PostToDataService() { varType = "POST"; varUrl = "http://dev-server/MyServices/MyService.svc/SampleSO"; varData = { CustomMessage: $("#TextBox1").val() }; varData = JSON.stringify(varData); varContentType = "application/json; charset=utf-8"; varDataType = "json"; varProcessData = true; CallService(); }

  Read the article

• Multiple "ObjectChangeTracker" getting created, can it be avoided?

  - by user555937

  Hi, We are working on a POC where we have following architecture (MVVM), WPF(Client) + WCF + Model(DataAccess)+ ADO.Net Entity Framework 4.0 (with SQL Server 2008 R2 as DB) All are different projects. In the DataAccess layer we have created different Entity Models(edmx) based on the functionality. The tables under perticular flow are grouped and created different entity models. We are using self tracking entities to and fro to communicate with the WPF client through wcf service. For Single model everything works fine. But when we created a Multiple models then few issues started coming. Mutliple models have few duplicate tables/entities. Two probels are, 1) When we try to access entities from different models mutiple objects "ObjectChangeTracker" are getting created. E.g. CompanyModel(edmx) - Company(Entity) - ObjectChangeTracker, ObjectState ProductModel(edmx) - Customer(Entity) - ObjectChangeTracker1, ObjectState1 OrderModel(edmx) - Oder(Entity) - ObjectChangeTracker2, ObjectState2 Is there any way to avoid this? 2) There are few tables which shared across the Models, E.g. Company(Entity) is used in All above mdoels. During compile time it does not thow any error. But run time It gives error saying "Schema specified is not valid. Errors: The mapping of CLR type to EDM type is ambiguous because multiple CLR types match the EDM type "Company"".. To resolve this, we renamed the entities with some prefix to make them Unique. Is there any other way we can resolve this without changing the name of the entity in the same assembly? Thanks in advance and appreciate if anyone has approach for these issues. Thanks, Kiran

  Read the article

• Webinvoke to POST JSON with ajax call

  - by G-Man

  This is my first time that I an using WCF Service with Knockout. I want to POST an entire view model as a JSON object with an ajax call. This is the error message that I get: Endpoints using 'UriTemplate' cannot be used with 'System.ServiceModel.Description.WebScriptEnablingBehavior' I have noticed that some developers send each value as a parameter which I feel is unnecessary especially if you work with a big object. This is my WCF method: [OperationContract] [WebInvoke(UriTemplate = "AddNewEvent?newEvent", Method = "POST", ResponseFormat = WebMessageFormat.Json, RequestFormat = WebMessageFormat.Json)] public bool AddNewEvent(Models.DAL_CRMEvents newEvent) { Entities.CRMEntities dbCRM = new Entities.CRMEntities(); //Models.CRMEvents crmEvent = new Models.CRMEvents(); Entities.Event crmEvent = new Entities.Event(); crmEvent.EventDateCreated = Convert.ToDateTime(newEvent.DateCreated); crmEvent.EventActive = true; crmEvent.EventDescription = newEvent.Description; crmEvent.EventDate = Convert.ToDateTime(newEvent.Date); crmEvent.EventTimeStart = TimeSpan.Parse(newEvent.TimeStart); crmEvent.EventTimeEnd = TimeSpan.Parse(newEvent.TimeEnd); crmEvent.EventAllDay = newEvent.AllDay; dbCRM.AddToEvent(crmEvent); return true; } This is my ajax function function SaveEvent (data) { var s = { newEvent: ko.mapping.toJS(data) } alert(data.AllDay()); $.ajax({ type: "POST", url: "../Services/CRMDataService.svc/AddNewEvent", data: JSON.stringify(s), contentType: "application/json; charset=utf-8", dataType: "JSON", success: function (result) { alert(result); }, error: function (jqXHR, textStatus, errorThrown) { if (textStatus == "error" && errorThrown != "") { var n = noty({ text: errorThrown, type: 'warning', dismissQueue: false, modal: true, layout: 'center', theme: 'defaults', callback: { } }) } } }) }

  Read the article

• Cannot serialize this List<T> extension

  - by Jaxidian

  I'm trying to push a subset of a collection of data through WCF to be consumed by WCF - think paged data. As such, I want this collection to have one page's worth of data as well as a total number of results. I figured this should be trivial by creating a custom object that extends List. However, everything I do results in my TotalNumber property coming across as 0. All of the data gets serialized/deserialized just fine but that single integer won't come across at all. Here's my first attempt that failed: [Serializable] public class PartialList<T> : List<T> { public PartialList() { } public PartialList(IEnumerable<T> collection) : base(collection) { } [DataMember] public int UnpartialTotalCount { get; set; } And here's my second attempt that failed in the exact same way: [Serializable] public class PartialList<T> : List<T>, ISerializable { public PartialList() { } public PartialList(IEnumerable<T> collection) : base(collection) { } [DataMember] public int UnpartialTotalCount { get; set; } protected PartialList(SerializationInfo info, StreamingContext context) { UnpartialTotalCount = info.GetInt32("UnpartialTotalCount"); } public void GetObjectData(SerializationInfo info, StreamingContext context) { info.AddValue("UnpartialTotalCount", UnpartialTotalCount); } } What's the deal here??

  Read the article

• Soap 1.2 Endpoint Performance

  - by mflair2000

  I have a Client WCF Host Service SOAP 1.2 Service setup and i'm having performance issues on the SOAP Java proxy. I have no control over how the Java service is setup, aside from the endpoint config. I have the Client running Asynchronously, and the host WCF service running in Async pattern, but i see the SOAP 1.2 proxy bottlenecking and handling the requests in a Synchronous way. Can someone take a look at the auto-generated SOAP 1.2 configuration below, from the SOAP 1.2 Service wsdl? Is there a way to configure this for Async way and improve performance? Could be configured for SOAP 1.1? <?xml version="1.0"?> <configuration> <system.web> <compilation debug="true"/> </system.web> <system.serviceModel> <bindings> <customBinding> <binding name="WebserviceListenerSoap12Binding" closeTimeout="00:30:00" openTimeout="00:30:00" receiveTimeout="00:30:00" sendTimeout="00:30:00"> <textMessageEncoding maxReadPoolSize="64" maxWritePoolSize="16" messageVersion="Soap12" writeEncoding="utf-8"> <readerQuotas maxDepth="32" maxStringContentLength="20000000" maxArrayLength="20000000" maxBytesPerRead="4096" maxNameTableCharCount="16384" /> </textMessageEncoding> <httpTransport manualAddressing="false" maxBufferPoolSize="20000000" maxReceivedMessageSize="20000000" allowCookies="false" authenticationScheme="Anonymous" bypassProxyOnLocal="false" decompressionEnabled="true" hostNameComparisonMode="StrongWildcard" keepAliveEnabled="true" maxBufferSize="20000000" proxyAuthenticationScheme="Anonymous" realm="" transferMode="Buffered" unsafeConnectionNtlmAuthentication="false" useDefaultWebProxy="true" /> </binding> </customBinding> </bindings> <client> <endpoint address="http://10.18.2.117:8080/java/webservice/WebserviceListener.WebserviceListenerHttpSoap12Endpoint/" binding="customBinding" bindingConfiguration="WebserviceListenerSoap12Binding" contract="ResolveServiceReference.WebserviceListenerPortType" name="WebserviceListenerHttpSoap12Endpoint" /> </client> </system.serviceModel> </configuration>

  Read the article

• What's best performance way to constantly change image on WP7?

  - by AlRodriguez

  I'm trying to make my own type of remote desktop for WP7. I have a WCF service that returns an image on what's on the target machine's screen. Here's the WCF Server Code: // Method to load desktop image Bitmap image = new Bitmap( ViewSize.Width, ViewSize.Height ); Graphics g = Graphics.FromImage( image ); g.CopyFromScreen( Position.X, Position.Y, 0, 0, ViewSize ); g.Dispose( ); return image; // Convert image to byte[] which is returned to client using ( MemoryStream ms = new MemoryStream( ) ) { Bitmap image = screenGrabber.LoadScreenImage( ); image.Save( ms, ImageFormat.Jpeg ); imageArray = ms.ToArray( ); } Here's the code for the WP7 client: MemoryStream stream = new MemoryStream( data ); BitmapImage image = new BitmapImage( ); image.SetSource( stream ); BackgroundImage.Source = image; The BackgroundImage variable is an Image control. I'm noticing this freeze on the emulator after a short while, and will eventually crash from an OutOfMemoryException. This is already pretty slow ( images show up a good half second later than what's on the screen ), and I'm wondering if there's a better/faster way of doing this? Any help would be great. Thanks in advance.

  Read the article

• Windows telling me, the local security authority is internally inconsistent upon mounting a network drive

  - by acme

  Since ages I've mounted a network share (via samba to a Linux machine) in Windows 7 to access it via drive letter. This worked flawlessly so far. Until now. Suddenly I couldn't access the drive anymore. Windows was telling me the network name (I didn't remember the exact term) was already in use. So I disconnected and tried to connect again: net use Y: \\10.10.10.208\work After a long time I get a message saying "The Local Security Authority (LSA) database contains an internal inconsistency" A restart didn't help. The mapped share is accessible (works on other machines in the same network), so obviously something strange is going on on my machine. Can anyone tell me how I can fix this inconsistency? Update: All machines that have saved the login information refuse with this error. So it must be something with the authorization. When I use net use Y: \\10.10.10.208\work /user:raphael it prompts me for the password and then returns that error message.

  Read the article

< Previous Page | 138 139 140 141 142 143 144 145 146 147 148 149  | Next Page >