Search Results

Search found 16642 results on 666 pages for 'wireless security'.

Page 142/666 | < Previous Page | 138 139 140 141 142 143 144 145 146 147 148 149  | Next Page >

  • Windows 7 can't see wireless printer

    - by Chance Robertson
    I have a P1102W printer from HP. I have a Windows 7 machine. I have a MacBook Pro. I setup the printer following the instructions from the Windows 7 machine. I am able to print from the Mac but not the Windows 7 machine. And to add, I am not able to print from any Windows 7 machines. The MacBook Pro address is 198.168.2.115, the Windows machine is 192.168.2.117, and the printer in 192.168.2.140. I can ping the printer from the Mac. I can ping the Windows 7 machine from the mac. I can ping the mac from the windows 7 machine. When I try to ping the printer from the Windows 7 machine I get destination unreachable. I can browse to the printer IP address from the mac and not the Windows 7. I have turned off the firewall on the Windows 7 machine and turned on network sharing. Is there something else I am missing. I can connect the printer with a USB cable to the Windows machine and print. I can not get the Windows machine to see the printer even though they are on the same network.

    Read the article

  • Is it possible to change the default scan folder on an Eye-Fi Wireless SD Card

    - by MichaelPh
    By default Eye-Fi cards scan the DCIM folder (and subfolders) used by most digital cameras for new images to upload. Is there a way of changing this to a different folder? In my particular case I'm using a Kodak photo scanner (P461) that uses a PHOTO(N) folder format to store the scanned images, as far as I know the device has no configuration interface to alter this setting so that doesn't seem to be an option. This topic on the Eye-Fi forums is the closest I've come to a solution, but a perfunctory investigation of Disk Probe doesn't make it obvious what needs to be modified on the card.

    Read the article

  • Wireless router setup for 1-1 NAT

    - by Carlos
    What I have: A linksys router WAG160N with firmware version 2 A "pool" of 5 external static IP's provided by my ISP 213.xx.xxx.n All the required configuration values for the static IPs such as (Subnet Mask, Gateway and static DNS 1, 2, 3) Current WAN Configuration: Encapsulation: RFC 2364 PPPoA Multiplexing: VC QoS type: UBR DSL modulation: MultiMode What's connected to the network: 1 x Server (That I want to make available to the outside) 5 x Desktops with static internal IP's, such as 192.168.0.xx 2 x Network printers, also with internal static IP's 2 x Laptops 1 x NAS (Network Attached Storage) also on static IP What I want to do: I would like to make the server available from outside the network, for example from your house. The problem is that Im not really sure how to do this. I have tried following the steps on the instruction manual in Linksys but they do not seem to work, once I set it up as shown bellow, I loose internet and all hell breaks loose. Going into further detail, I would prefer if the network is changed as little as possible, by this I mean that all the computers stay networked within eachother and only the server is accessible from the outside the network. What I need HELP with: I have read around that it is possible to set a 1-1 NAT (I know where it is in the menu but have no clue what it does...) so that I can NAT a single public IP directly to a single private IP (in our case the server). But please, How do I do that? Or maybe an alternative?

    Read the article

  • debian LTS : how to keep packages up-to-date with last security fixes using apt

    - by Quentin
    What's the best way to keep packages up-to-date (ie with the last security fixes) without worried about major version update ? For instance, apache2 for squeezeis is 2.2.16 (https://packages.debian.org/source/squeeze/apache2) However, last apache2 version for the 2.2.x branch is 2.2.27 Test repository can't be used since they use the 2.4.x versions and I'd like to stick on the 2.2.x (to avoid migration issues) How would you handle this situation and how can I update to 2.2.27 ?

    Read the article

  • Mouse works fine but keyboard (not wireless) not responding to anything

    - by Christine Boeke
    I read previous questions like mine and looked to see if keys were depressed and checked to make sure the mouse key was off in the system preferences. The mouse works just fine but the keyboard seems to be dead. I plugged in another keyboard and it responded identically. Is it something in the Desktop itself? Could I need a technician? I have searched for answers on line and had no success. Thanks!

    Read the article

  • HTTP, HTTPS and FTP is not working but SMTP and IMAP are working.

    - by nWorx
    Yesterday on a computer of a friend a strange thing happened. after booting the ports fo http, https and ftp are closed but e-mail is still working. in the control panel the windows firewall seems active even if he tries to deactivate it. I have a suspision that it is the faul of norton internet security 2010, we have tried to uninstall it, but the uninstallation did not work. when using the removal tool from symantec it just goes to 23% and then it crashes. the process ccSvcHst.exe is still running. How can I safely remove the rest of Norton Internet Security? Edit: Norton Internet Security 2010 is sucesfully removed, but still no connectivity...

    Read the article

  • AD reset user passwords for a security group

    - by Nathan C
    I'm not quite sure if this is possible or not, but I need to force a certain security group's users to have their passwords expire so they'll be forced to change them on next login. The reason for this is because I applied a FGPP (password policy) to this particular group in order to enforce strong passwords. Well, many users have really weak passwords and they won't be changed unless they're forced. Is there a way to do this without forcing everyone to a single password?

    Read the article

  • Desktop G4: Wireless?

    - by Yar
    I just inherited a G4 Server (I don't know much about it, except that it runs 10.4 and cannot go beyond that). It does not have an Airport connection. How would I figure out what kind of card or network interface I need for Wifi?

    Read the article

  • Wireless Access Point stopped working

    - by Alex Pritchard
    I have a simple LAN set up at home using a Linksys WRT54GSV4 as my primary router and an Encore ENHWI-2AN3 as an access point. I connect the Encore to the Linksys by running a cable from one of the Linksys LAN ports into the Encore WAN input. I originally configured this using the Encore setup wizard, setting the device up in AP Router Mode. It detected the input network and worked about as expected, creating a second network that used my primary network to connect to the internet. It worked fine for about 2 weeks, then abruptly cut out today. I checked to make sure the network was still live through the cable going into the Encore (provides internet when connected to a laptop directly) and that devices are still able to connect to the network being broadcast by the Encore. When I try to rerun the connection wizard on the Encore, I receive the message "No Services found in WAN port." The WAN Settings is no longer retrieving a dynamic ip from the line. I tried providing a static IP, assigning an IP address within the subnet range of my primary router that wasn't being used and pointing the Default Gateway to the Linksys IP, but this did not work either. When I plug the cable into the WAN port, an internet light comes on that is not lit when a live network is not connected. I've tried doing a hard reset on the Encore (held down the rest button until the lights flashed, reconfigured from scratch), but the WAN settings are still not detected. Also tried powering off and on the modem, linksys, and encore. Any suggestions would be appreciated!

    Read the article

  • Using command line to connect to a wireless network with an http login

    - by Shane
    I'm trying to connect to a wifi network where it hijacks all requests and redirects you to a page where you have to agree to a terms of use before it lets you connect to the actual outside world. This is a pretty common practice, and usually doesn't pose much of a problem. However, I've got a computer running Ubuntu 9.10 server with no windowing system. How can I use the command line to agree to the terms of use? I don't have internet access on the computer to download packages via apt-get or anything like that. Sure, I can think of any number of workarounds, but I suspect there's an easy way to use wget or curl or something. Basically, I need a command line solution for sending an HTTP POST request essentially clicking on a button. For future reference, it'd be helpful to know how to send a POST request with, say, a username and password if I ever find myself in that situation in another hotel or airport.

    Read the article

  • Amazon EC2 open ports for security groups present in other accounts

    - by rahul
    Hi, Assume, I am having 2 ec2 accounts (say A and B), both have different list of security groups. Now I want to open a particular port (say 80) for an instance running in account A, to account B. ie, I want to only allow account B instances, to access account A's 80 port. Could any one update me, is there a way to do this.?? Additionally, may I access account A's instance from account B's instance by using its private ip address/host name ?? Thanks in Advance,

    Read the article

  • Logins with only HTTP - are they as insecure as I'm thinking?

    - by JoeCool1986
    Recently I was thinking about how websites like gmail and amazon use HTTPS during the login process when accessing your account. This makes sense, obviously, since you're typing in your account username and password and you would want that to be secure. However, on Facebook, among countless other websites, their logins are done with simple HTTP. Doesn't that mean that my login name and password are completely unencrypted? Which, even worse, means that all those people who login to their facebooks (or similar sites) at a wifi hotspot in public are susceptible to anyone getting their credentials using a simple packet sniffer (or something similar)? Is it really that easy? Or am I misunderstanding internet security? I'm a software engineer working on some web related stuff, and although at the current time I'm not too involved with the security aspect of our software, I knew I should probably know the answer to this question, since it's extremely fundamental to website security. Thanks!

    Read the article

  • Problems with connecting to wireless network on windows 7

    - by Naveen
    I have a Dell laptop with Windows 7 (Home premium) 64 bit edition installed on it. I use a Wi-Fi router to browse the net. My problem is, I lose the network connection every 10 minutes or so. The network icon on the system tray shows the refresh icon and the status as "identifying network". The network is fine and works fine with my phone. I saw on the net this may be caused if I have enabled IPv6, so I disabled it but still problem persists. When I look at the event log I see the following entries: "Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0xXXXXXXXX. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server." I have also installed VirtualBox(32 bit edition) on the laptop. Does anybody any solution to this?

    Read the article

  • How to effectively secure a dedicated server for intranet use?

    - by Mark
    I need to secure a dedicated server for intranet use, the server is managed so will have software based security, but what other security should be considered for enterprise level security? The intranet is a host for an ECM (Alfresco) managing and storing sensitive documents. As the information is sensitive we are trying to make it as secure as reasonably possible (requirement in UK law). We plan to encrypt the data on the database. It will be connected to via SSL encryption. Should we consider Hardware firewall, Private lan between the application server and database server?

    Read the article

  • I need to make Windows 7 STOP disabling the wifi adapter when the wired LAN is connected

    - by Escobar Ceaser
    This is a Dell Latitude E6430. There is a setting in the bios to control this behavior and I have DISABLED it but it still happens. I am also running the latest bios. When I plug in a network cable the wifi adapter becomes disabled. I need it to stay enabled. What else could be making this happen? EDIT: The reason I need to do this is because with NETSH WLAN commands you can create a wifi hotspot by sharing the internet connection on the wired adapter and broadcasting a ssid on the virtual wifi nic. I do this all the time but it's not working on this laptop. I'm wondering if it's a network security thing where I am. I'm going to try from my hotel tonight and report back.

    Read the article

  • Cross Domain access of self hosted WCF services?

    - by Macnique
    I have developed a WPF application which communicates with a set of self hosted WCF services which are under same domain and I use the following setup in the config files. <security mode="Transport"> <transport clientCredentialType="Windows" protectionLevel="EncryptAndSign" /> <message clientCredentialType="Windows" /> </security> I hosted the services on a server in different domain .I can achieve the communication by setting the security mode to "None" which is not ideal. Is there any other setting i can user for cross domain communication or i have to do with some trusted certificates ? I would be glad if some one can guide me because all the searches on google directed me to silverlight applications +Crossdomain.xml+WCF but i have't seen any combination of WPF on crossdomain environment.

    Read the article

  • having public computers without joining the domain

    - by MCarter
    Good Morning, I would like to know what is the best arrangement for setting up 24 computers at a facility. We do not want these computers to join our domain because of security concerns. We plan on having these public computers connect to our wifi network. If anyone knows of the best way to approach this, that would be great! We also need to add printers to these public computers. We would also like to lock each computer down. Since we are not connecting by network, I assume we would have to configure each group policy.

    Read the article

  • Editing java.security - says it is [read only] (Fedora)

    - by jax
    I am trying to edit the file java.security but it opens as read only. I am running as root user but I think this is happening because the java process is currently using the file. How can I temporarily close the process and edit the file and then start java up again? I am using Fedora.

    Read the article

  • error 503: service unavailable when using apt-get update behind proxy

    - by ubuntu2man
    Hi, I am using a transparent proxy (other box). When I try to do an 'apt-get update' I get these warnings (in german): ... W: Fehlschlag beim Holen von http://security.ubuntu.com/ubuntu/dists/maverick-security/restricted/source/Sources.gz 503 Service Unavailable W: Fehlschlag beim Holen von http://security.ubuntu.com/ubuntu/dists/maverick-security/universe/source/Sources.gz 503 Service Unavailable W: Fehlschlag beim Holen von http://security.ubuntu.com/ubuntu/dists/maverick-security/multiverse/source/Sources.gz 503 Service Unavailable W: Fehlschlag beim Holen von http://security.ubuntu.com/ubuntu/dists/maverick-security/main/binary-i386/Packages.gz 503 Service Unavailable W: Fehlschlag beim Holen von http://security.ubuntu.com/ubuntu/dists/maverick-security/restricted/binary-i386/Packages.gz 503 Service Unavailable W: Fehlschlag beim Holen von http://security.ubuntu.com/ubuntu/dists/maverick-security/universe/binary-i386/Packages.gz 503 Service Unavailable E: Einige Indexdateien konnten nicht heruntergeladen werden, sie wurden ignoriert oder alte an ihrer Stelle benutzt. I changed ~.bashrc: http_proxy=http://192.168.120.199:8080 https_proxy=https://192.168.120:8080 export http_proxy export https_proxy I wrote on commandline: export http_proxy=http://proxyusername:proxypassword@proxyaddress:proxyport sudo apt-get update And I edited /etc/apt/apt.conf: Acquire::http::proxy "http://192.168.120.199:8080/"; Acquire::ftp::proxy "http://192.168.120.199:8080/"; Nothing has worked. Does anyone knows how to make apt-get working through a transparent proxy? Regards, ubuntu2man

    Read the article

  • Oracle Sun Solaris 11.1 Completes EAL4+ Common Criteria Evaluation

    - by Joshua Brickman-Oracle
    Oracle is pleased to announce that the Oracle Solaris 11.1 operating system has achieved a Common Criteria certification at Evaluation Assurance Level (EAL) 4 augmented by Flaw Remediation under the Canadian Communications Security Establishment’s (CSEC) Canadian Common Criteria  Scheme (CCCS).  EAL4 is the highest level achievable for commercial software, and is the highest level mutually recognized by 26 countries under the current Common Criteria Recognition Arrangement (CCRA).  Oracle Solaris 11.1 is conformant to the BSI Operating System Protection Profile v2.0 with the following four extended packages. (1) Advanced Management, (2) Extended Identification and Authentication, (3) Labeled Security, and (4) Virtualization. Common Criteria is an international framework (ISO/IEC 15408) which defines a common approach for evaluating security features and capabilities of Information Technology security products. A certified product is one that a recognized Certification Body asserts as having been evaluated by a qualified, accredited, and independent evaluation laboratory competent in the field of IT security evaluation to the requirements of the Common Criteria and Common Methodology for Information Technology Security Evaluation. Oracle Solaris is the industry’s most widely deployed UNIXtm operating system, delivers mission critical cloud infrastructure with built-in virtualization, simplified software lifecycle management, cloud scale data management, and advanced protection for public, private, and hybrid cloud environments. It provides a suite of technologies and applications that create an operating system with optimal performance. Oracle Solaris 11.1 includes key technologies such as Trusted Extensions, the Oracle Solaris Cryptographic Framework, Zones, the ZFS File System, Image Packaging System (IPS), and multiple boot environments. The Oracle Solaris 11.1 Certification Report and Security Target can be viewed on the Communications Security Establishment Canada (CSEC) site and on the Common Criteria Portal. For more information on Oracle’s participation in the Common Criteria program, please visit the main Common Criteria information page here: (http://www.oracle.com/technetwork/topics/security/oracle-common-criteria-095703.html) For a complete list of Oracle products with Common Criteria certifications and FIPS 140-2 validations, please see the Security Evaluations website here: (http://www.oracle.com/technetwork/topics/security/security-evaluations-099357.html).

    Read the article

  • apt-get issue after upgrading to 12.04

    - by user83906
    I have recently upgraded my cluster from 11.10 to 12.04. After the upgrade, I am having trouble running apt-get on the cluster nodes. I can ssh between the nodes (client-to-client; client-to-head; client-to-external etc.). However, sudo apt-get update produces the following errors: Ign http://us.archive.ubuntu.com precise InRelease Ign http://security.ubuntu.com precise-security InRelease Ign http://www.openfoam.org maverick InRelease Ign http://us.archive.ubuntu.com precise-updates InRelease Err http://security.ubuntu.com precise-security Release.gpg Something wicked happened resolving 'security.ubuntu.com:http' (-5 - No address associated with hostname) Err http://www.openfoam.org maverick Release.gpg Something wicked happened resolving 'www.openfoam.org:http' (-5 - No address associated with hostname) Ign http://us.archive.ubuntu.com precise-backports InRelease Ign http://www.openfoam.org maverick Release Ign http://security.ubuntu.com precise-security Release Err http://us.archive.ubuntu.com precise Release.gpg Something wicked happened resolving 'us.archive.ubuntu.com:http' (-5 - No address associated with hostname) Ign http://security.ubuntu.com precise-security/main Sources/DiffIndex Err http://us.archive.ubuntu.com precise-updates Release.gpg Something wicked happened resolving 'us.archive.ubuntu.com:http' (-5 - No address associated with hostname) Ign http://security.ubuntu.com precise-security/restricted Sources/DiffIndex 15% [Connecting to us.archive.ubuntu.com] [Connecting to security.ubuntu.com] [Connecting to www.openfoam.org] On the headnode, I have in /etc/network/iterfaces: auto eth0 iface eth0 inet static address 192.168.0.1/24 On the client nodes, I have /etc/network/iterfaces: auto eth0 iface eth0 inet static address 192.168.0.101 netmask 255.255.255.0 gateway 192.168.0.1 Please advise.

    Read the article

< Previous Page | 138 139 140 141 142 143 144 145 146 147 148 149  | Next Page >