binary trees - Page 143

DVD/CD burning .zip: is it more reliable, faster, longer lasting to burn a zip of files rather than the files as a folder?

- by Rob

Is it more reliable, faster, longer lasting to burn to CD/DVD a zip (or a few large zips) of files rather than the files as a folder? Just thinking if 1000s of small files would not be as efficiently recorded compared with one or a few large zips. Also, even after the burning program verifies the disc, I also use Beyond Compare to compare the files with those on the disc. Always binary compares as identical but I hear the drive stuttering presumably as the head is being shifted only slightly each time to seek the next file, which leads me to think that its best to make one or more zips and copy those locally to compare. Or is it that burning invidual files to the disc is not as readable which causes the head to stutter. There aren't any problems, my disc burns are reliable, just thinking more of efficiency and longevity, the discs burn and verify fast enough on my 18x DVD burner. I'm using ImgBurn mostly. Also used Nero in the past. I burn whole discs closed, finalised. Not sure which write mode but would think Disc At Once from a temporary cached image made by the burning program would be the most reliable.

Read the article

mysql - moving to a lower performance server, how small can I go?

- by pedalpete

Read the article

Problems with Net::FTP slowing down

- by c0bra

I'm running into an issue with using Net::FTP (latest version 2.77) to transfer files to a remote host where a process is waiting to take the file and feed into some other system. The remote process does this every 5 minutes but ignores files that were modified in the last 0.2 seconds (that's right, 1/5th of a second). The problem is that for some reason the transfer seems to halt or slow down a bit and no data is transferred for several seconds and during this time the process picks up the incomplete file and removes it. The weird thing is that manually using the ftp binary the file seems to transfer fine. I've tried messing with all of the Net::FTP switches (Active/Passive, different Blocksizes) and nothing seems to help. What's also weird is that the file seems to transfer fairly quickly at first and on occasion a bit into the transfer. Like 300-500k will go up immediately, but then it slows down to where the file size is only increasing by 2,896 bytes every several seconds. It doesn't seem to happen when I try sending the file to a different remote host, but since a regular manual ftp transfer works with this host I don't know what to think. Some combination of Net::FTP and possibly a slow or wonky connection?

Read the article

Sed: Deleting all content matching a pattern

- by Svish

I have some plist files on mac os x that I would like to shrink. They have a lot of <dict> with <key> and values. One of these keys is a thumbnail which has a <data> value with base64 encoded binary (I think). I would like to remove this key and value. I was thinking this could maybe be done by sed, but I don't really know how to use it and it seems like sed only works on a line-by-line basis? Either way I was hoping someone could help me out. In the file I would like to delete everything that matches the following pattern or something close to that: <key>Thumbnail<\/key>[^<]*<\/data> In the file it looks like this: // Other keys and values <key>Thumbnail</key> <data> TU0AKgAAOEi25Pqx3/ip2fak0vOdzPCVxu2RweuPv+mLu+mIt+aGtuaEtOSB ... dCBBcHBsZSBDb21wdXRlciwgSW5jLiwgMjAwNQAAAAA= </data> // Other keys and values Anyone know how I could do this? Also, if there are any better tools that I can use in the terminal to do this, I would like to know about that as well :)

Read the article

How to search file for matching whole lines?

- by WilliamKF

I have a command which sends to stdout a series of numbers, each on a new line. I need to determine whether a particular number exists in the list. The match needs to be exact, not a subset. For example, a simple way to approach this that does not work would be to do: /run/command/outputing/numbers | grep -c <numberToSearch> My this gives a false positive on the following list when searching for '456': 1234567 98765 23 1771 If the count is non-zero, a match was found or if it was zero, the number is not in the list. The issue with this is that the numberToSearch could match a subsequence of numbers on a line, instead I only want hits on the whole line. I looked at the man page for grep and did not see any way to only match whole lines. Is there a way to do this, or would I be better off using awk or sed or some other tool instead? I need a binary answer as to whether the number being search for is present or not.

Read the article

Upstart multiple instances of service not working.

- by Dax

I started playing with MongoDB on Lucid. Now I would like to run a DB and Config server on the same box. They both use the same binary to launch, but with different config files and running on different ports. All directories for log and lib is split so one goes to mongodb and the other to mongoconf. Each process can be started without any problems on their own. start mongodb stop mongodb start mongoconf stop mongoconf But if I try to start both, the second one would just start and exit. Using 'initctl log-priority debug' I got the following in the logs. Jan 6 12:44:12 mongo4 init: event_finished: Finished started event Jan 6 12:44:12 mongo4 init: job_process_handler: Ignored event 1 (1) for process 5690 Jan 6 12:44:12 mongo4 init: mongoconf (mongoconf) main process (5690) terminated with status 1 Jan 6 12:44:12 mongo4 init: mongoconf (mongoconf) goal changed from start to stop Jan 6 12:44:12 mongo4 init: mongoconf (mongoconf) state changed from running to stopping man 5 init shows that you can use instance names to differentiate the two. I tried using 'instance mongoconf' in the on upstart script and 'instance mongodb' in the other one, and it still fails. I can manually start the other process, so there is definitely no conflicts on port numbers or directories. Any ideas on what to try or how to get output on why it is 'terminated with status 1'? Thanx

Read the article

NGINX + PHP-FPM - Strange issue when trying to display images via php-gd / readfile - Connection wont terminate

- by anonymous-one

Ok, to get the details out of the way: The php script can be anything as simple as: <? header('Content-Type: image/jpeg'); readfile('/local/image.jpg'); ?> When I try to execute this via nginx + php-fpm what happens is the image shows up in the browser, here is what happens: IE - The page stays blank for a long period of time, and eventually the image is shown. Chrome - The image shows, but the loading spinner spins and spins for a long period of time. Eventually the debugger will show the image in red as in error, but the image shows up fine. Everything else on the server works great. Its pushing out about 100mbit steady serving static content. So this is definatly a php-fpm related issue. I THINK this may have something to do with the chunked encoding being sent back wrong? Also, I threw in a pause before the image was read, and got the pid of the fpm process, and it looks as tho its terminatly correctly (from strace): shutdown(3, 1 /* send */) = 0 recvfrom(3, "\1\5\0\1\0\0\0\0", 8, 0, NULL, NULL) = 8 recvfrom(3, "", 8, 0, NULL, NULL) = 0 close(3) = 0 The above was dumped long before ie/chrome decided to give up (even tho the image was shown) loading the image. Displaying HTML / text content is fine. Big bodies etc all load nice and fast and terminate right away (as they should). Doing something like: THIS IS THE IMAGE ---BINARY DUMP OF IMAGE--- Works fine too. Any ideas?

Read the article

Nagios escalation debugging

- by Oesor

I'm having some issues with escalations happening properly and I'm not sure if it's because of my config or because the nagios binary is nonstandard and something may be broken. I've got little experience with nagios, and just want to make sure this is being set appropriately. Should the following config file definition allow the escalations to take over and increment the notification interval as expected? Is there somewhere else in the config files I should be looking at to figure out what's going on? I've enabled debug 32 in the config and it's simply spitting out 'Host notification will NOT be escalated.' for each notification. The configuration does pass the pre flight check with no issues, and reports that it's parsing the three host escalations in the config. # test host definition define host { host_name test alias test address 10.0.0.10 hostgroups test check_interval 0 retry_interval 1 max_check_attempts 2 flap_detection_enabled 0 icon_image windows.png icon_image_alt LOGO - Windows vrml_image windows.png statusmap_image windows.png action_url /info/host/275 check_period 24x7 contact_groups hostgroup15_servicegroup1,hostgroup15_servicegroup10,hostgroup15_servicegroup13,hostgroup15_servicegroup14,hostgroup15_servicegroup2,hostgroup15_servicegroup3,hostgroup15_servicegroup4,hostgroup15_servicegroup42,hostgroup15_servicegroup45,hostgroup15_servicegroup46,hostgroup15_servicegroup47,hostgroup15_servicegroup5,hostgroup15_servicegroup8,hostgroup15_servicegroup9,ov_monitored_by_master check_command check_host_15!-H $HOSTADDRESS$ -t 3 -w 500.0,80% -c 1000.0,100% parents nagios notifications_enabled 1 notification_interval 3 notification_period 24x7 notification_options u,d,r use host-global } define hostescalation{ host_name test first_notification 3 last_notification 4 notification_interval 10 contact_groups hostgroup15_servicegroup1,hostgroup15_servicegroup10,hostgroup15_servicegroup13,hostgroup15_servicegroup14,hostgroup15_servicegroup2,hostgroup15_servicegroup3,hostgroup15_servicegroup4,hostgroup15_servicegroup42,hostgroup15_servicegroup45,hostgroup15_servicegroup46,hostgroup15_servicegroup47,hostgroup15_servicegroup5,hostgroup15_servicegroup8,hostgroup15_servicegroup9,ov_monitored_by_master } define hostescalation{ host_name test first_notification 4 last_notification 5 notification_interval 30 contact_groups hostgroup15_servicegroup1,hostgroup15_servicegroup10,hostgroup15_servicegroup13,hostgroup15_servicegroup14,hostgroup15_servicegroup2,hostgroup15_servicegroup3,hostgroup15_servicegroup4,hostgroup15_servicegroup42,hostgroup15_servicegroup45,hostgroup15_servicegroup46,hostgroup15_servicegroup47,hostgroup15_servicegroup5,hostgroup15_servicegroup8,hostgroup15_servicegroup9,ov_monitored_by_master } define hostescalation{ host_name test first_notification 5 last_notification 0 notification_interval 240 contact_groups hostgroup15_servicegroup1,hostgroup15_servicegroup10,hostgroup15_servicegroup13,hostgroup15_servicegroup14,hostgroup15_servicegroup2,hostgroup15_servicegroup3,hostgroup15_servicegroup4,hostgroup15_servicegroup42,hostgroup15_servicegroup45,hostgroup15_servicegroup46,hostgroup15_servicegroup47,hostgroup15_servicegroup5,hostgroup15_servicegroup8,hostgroup15_servicegroup9,ov_monitored_by_master }

Read the article

Deploying Memcached as 32bit or 64bit?

- by rlotun

I'm curious about how people deploy memcached on 64 bit machines. Do you compile a 64bit (standard) memcached binary and run that, or do people compile it in 32bit mode and run N instances (where N = machine_RAM / 4GB)? Consider a recommended deployment of Redis (from the Redis FAQ): Redis uses a lot more memory when compiled for 64 bit target, especially if the dataset is composed of many small keys and values. Such a database will, for instance, consume 50 MB of RAM when compiled for the 32 bit target, and 80 MB for 64 bit! That's a big difference. You can run 32 bit Redis binaries in a 64 bit Linux and Mac OS X system without problems. For OS X just use make 32bit. For Linux instead, make sure you have libc6-dev-i386 installed, then use make 32bit if you are using the latest Git version. Instead for Redis <= 1.2.2 you have to edit the Makefile and replace "-arch i386" with "-m32". If your application is already able to perform application-level sharding, it is very advisable to run N instances of Redis 32bit against a big 64 bit Redis box (with more than 4GB of RAM) instead than a single 64 bit instance, as this is much more memory efficient. Would not the same recommendation also apply to a memcached cluster?

Read the article

Trouble Starting MySL Community Server on Windows 7

- by CodeAngel

I have installed Netbeans 7 on my Windows 7. In addition, the MySQL Community Server 5.6.12 is installed with the MSI installer on thesame 7 PC. The MySQL server is integrated with the Netbeans IDE. However , it is not possible to start or stop the MySQL server from the command prompt or the Netbeans IDE. I am only able to start or stop the server from the Windows 7 services tool. Also , it is difficult running SQL queries from the Netbeans IDE even though it shows there is connection with the MySQL server. I have added the my.ini file to the installed directory of the MySQL server , that is : C:\Program Files\MySQL\MySQL Server 5.6 below is the my.ini file : # For advice on how to change settings please see # http://dev.mysql.com/doc/refman/5.6/en/server-configuration-defaults.html # *** DO NOT EDIT THIS FILE. It's a template which will be copied to the # *** default location during install, and will be replaced if you # *** upgrade to a newer version of MySQL. [mysqld] # Remove leading # and set to the amount of RAM for the most important data # cache in MySQL. Start at 70% of total RAM for dedicated server, else 10%. # innodb_buffer_pool_size = 128M # Remove leading # to turn on a very important data integrity option: logging # changes to the binary log between backups. # log_bin # These are commonly set, remove the # and set as required. # basedir = ..... # datadir = ..... port = 3306 # server_id = ..... # Remove leading # to set options mainly useful for reporting servers. # The server defaults are faster for transactions and fast SELECTs. # Adjust sizes as needed, experiment to find the optimal values. # join_buffer_size = 128M # sort_buffer_size = 2M # read_rnd_buffer_size = 2M sql_mode=NO_ENGINE_SUBSTITUTION,STRICT_TRANS_TABLES Any suggestion is welcomed.

Read the article

Using the West Wind Web Toolkit to set up AJAX and REST Services

- by Rick Strahl

I frequently get questions about which option to use for creating AJAX and REST backends for ASP.NET applications. There are many solutions out there to do this actually, but when I have a choice - not surprisingly - I fall back to my own tools in the West Wind West Wind Web Toolkit. I've talked a bunch about the 'in-the-box' solutions in the past so for a change in this post I'll talk about the tools that I use in my own and customer applications to handle AJAX and REST based access to service resources using the West Wind West Wind Web Toolkit. Let me preface this by saying that I like things to be easy. Yes flexible is very important as well but not at the expense of over-complexity. The goal I've had with my tools is make it drop dead easy, with good performance while providing the core features that I'm after, which are: Easy AJAX/JSON Callbacks Ability to return any kind of non JSON content (string, stream, byte[], images) Ability to work with both XML and JSON interchangeably for input/output Access endpoints via POST data, RPC JSON calls, GET QueryString values or Routing interface Easy to use generic JavaScript client to make RPC calls (same syntax, just what you need) Ability to create clean URLS with Routing Ability to use standard ASP.NET HTTP Stack for HTTP semantics It's all about options! In this post I'll demonstrate most of these features (except XML) in a few simple and short samples which you can download. So let's take a look and see how you can build an AJAX callback solution with the West Wind Web Toolkit. Installing the Toolkit Assemblies The easiest and leanest way of using the Toolkit in your Web project is to grab it via NuGet: West Wind Web and AJAX Utilities (Westwind.Web) and drop it into the project by right clicking in your Project and choosing Manage NuGet Packages from anywhere in the Project. When done you end up with your project looking like this: What just happened? Nuget added two assemblies - Westwind.Web and Westwind.Utilities and the client ww.jquery.js library. It also added a couple of references into web.config: The default namespaces so they can be accessed in pages/views and a ScriptCompressionModule that the toolkit optionally uses to compress script resources served from within the assembly (namely ww.jquery.js and optionally jquery.js). Creating a new Service The West Wind Web Toolkit supports several ways of creating and accessing AJAX services, but for this post I'll stick to the lower level approach that works from any plain HTML page or of course MVC, WebForms, WebPages. There's also a WebForms specific control that makes this even easier but I'll leave that for another post. So, to create a new standalone AJAX/REST service we can create a new HttpHandler in the new project either as a pure class based handler or as a generic .ASHX handler. Both work equally well, but generic handlers don't require any web.config configuration so I'll use that here. In the root of the project add a Generic Handler. I'm going to call this one StockService.ashx. Once the handler has been created, edit the code and remove all of the handler body code. Then change the base class to CallbackHandler and add methods that have a [CallbackMethod] attribute. Here's the modified base handler implementation now looks like with an added HelloWorld method: using System; using Westwind.Web; namespace WestWindWebAjax { /// <summary> /// Handler implements CallbackHandler to provide REST/AJAX services /// </summary> public class SampleService : CallbackHandler { [CallbackMethod] public string HelloWorld(string name) { return "Hello " + name + ". Time is: " + DateTime.Now.ToString(); } } } Notice that the class inherits from CallbackHandler and that the HelloWorld service method is marked up with [CallbackMethod]. We're done here. Services Urlbased Syntax Once you compile, the 'service' is live can respond to requests. All CallbackHandlers support input in GET and POST formats, and can return results as JSON or XML. To check our fancy HelloWorld method we can now access the service like this: http://localhost/WestWindWebAjax/StockService.ashx?Method=HelloWorld&name=Rick which produces a default JSON response - in this case a string (wrapped in quotes as it's JSON): (note by default JSON will be downloaded by most browsers not displayed - various options are available to view JSON right in the browser) If I want to return the same data as XML I can tack on a &format=xml at the end of the querystring which produces: <string>Hello Rick. Time is: 11/1/2011 12:11:13 PM</string> Cleaner URLs with Routing Syntax If you want cleaner URLs for each operation you can also configure custom routes on a per URL basis similar to the way that WCF REST does. To do this you need to add a new RouteHandler to your application's startup code in global.asax.cs one for each CallbackHandler based service you create: protected void Application_Start(object sender, EventArgs e) { CallbackHandlerRouteHandler.RegisterRoutes<StockService>(RouteTable.Routes); } With this code in place you can now add RouteUrl properties to any of your service methods. For the HelloWorld method that doesn't make a ton of sense but here is what a routed clean URL might look like in definition: [CallbackMethod(RouteUrl="stocks/HelloWorld/{name}")] public string HelloWorld(string name) { return "Hello " + name + ". Time is: " + DateTime.Now.ToString(); } The same URL I previously used now becomes a bit shorter and more readable with: http://localhost/WestWindWebAjax/HelloWorld/Rick It's an easy way to create cleaner URLs and still get the same functionality. Calling the Service with $.getJSON() Since the result produced is JSON you can now easily consume this data using jQuery's getJSON method. First we need a couple of scripts - jquery.js and ww.jquery.js in the page: <!DOCTYPE html> <html> <head> <link href="Css/Westwind.css" rel="stylesheet" type="text/css" /> <script src="scripts/jquery.min.js" type="text/javascript"></script> <script src="scripts/ww.jquery.min.js" type="text/javascript"></script> </head> <body> Next let's add a small HelloWorld example form (what else) that has a single textbox to type a name, a button and a div tag to receive the result: <fieldset> <legend>Hello World</legend> Please enter a name: <input type="text" name="txtHello" id="txtHello" value="" /> <input type="button" id="btnSayHello" value="Say Hello (POST)" /> <input type="button" id="btnSayHelloGet" value="Say Hello (GET)" /> <div id="divHelloMessage" class="errordisplay" style="display:none;width: 450px;" > </div> </fieldset> Then to call the HelloWorld method a little jQuery is used to hook the document startup and the button click followed by the $.getJSON call to retrieve the data from the server. <script type="text/javascript"> $(document).ready(function () { $("#btnSayHelloGet").click(function () { $.getJSON("SampleService.ashx", { Method: "HelloWorld", name: $("#txtHello").val() }, function (result) { $("#divHelloMessage") .text(result) .fadeIn(1000); }); });</script> .getJSON() expects a full URL to the endpoint of our service, which is the ASHX file. We can either provide a full URL (SampleService.ashx?Method=HelloWorld&name=Rick) or we can just provide the base URL and an object that encodes the query string parameters for us using an object map that has a property that matches each parameter for the server method. We can also use the clean URL routing syntax, but using the object parameter encoding actually is safer as the parameters will get properly encoded by jQuery. The result returned is whatever the result on the server method is - in this case a string. The string is applied to the divHelloMessage element and we're done. Obviously this is a trivial example, but it demonstrates the basics of getting a JSON response back to the browser. AJAX Post Syntax - using ajaxCallMethod() The previous example allows you basic control over the data that you send to the server via querystring parameters. This works OK for simple values like short strings, numbers and boolean values, but doesn't really work if you need to pass something more complex like an object or an array back up to the server. To handle traditional RPC type messaging where the idea is to map server side functions and results to a client side invokation, POST operations can be used. The easiest way to use this functionality is to use ww.jquery.js and the ajaxCallMethod() function. ww.jquery wraps jQuery's AJAX functions and knows implicitly how to call a CallbackServer method with parameters and parse the result. Let's look at another simple example that posts a simple value but returns something more interesting. Let's start with the service method: [CallbackMethod(RouteUrl="stocks/{symbol}")] public StockQuote GetStockQuote(string symbol) { Response.Cache.SetExpires(DateTime.UtcNow.Add(new TimeSpan(0, 2, 0))); StockServer server = new StockServer(); var quote = server.GetStockQuote(symbol); if (quote == null) throw new ApplicationException("Invalid Symbol passed."); return quote; } This sample utilizes a small StockServer helper class (included in the sample) that downloads a stock quote from Yahoo's financial site via plain HTTP GET requests and formats it into a StockQuote object. Lets create a small HTML block that lets us query for the quote and display it: <fieldset> <legend>Single Stock Quote</legend> Please enter a stock symbol: <input type="text" name="txtSymbol" id="txtSymbol" value="msft" /> <input type="button" id="btnStockQuote" value="Get Quote" /> <div id="divStockDisplay" class="errordisplay" style="display:none; width: 450px;"> <div class="label-left">Company:</div> <div id="stockCompany"></div> <div class="label-left">Last Price:</div> <div id="stockLastPrice"></div> <div class="label-left">Quote Time:</div> <div id="stockQuoteTime"></div> </div> </fieldset> The final result looks something like this: Let's hook up the button handler to fire the request and fill in the data as shown: $("#btnStockQuote").click(function () { ajaxCallMethod("SampleService.ashx", "GetStockQuote", [$("#txtSymbol").val()], function (quote) { $("#divStockDisplay").show().fadeIn(1000); $("#stockCompany").text(quote.Company + " (" + quote.Symbol + ")"); $("#stockLastPrice").text(quote.LastPrice); $("#stockQuoteTime").text(quote.LastQuoteTime.formatDate("MMM dd, HH:mm EST")); }, onPageError); }); So we point at SampleService.ashx and the GetStockQuote method, passing a single parameter of the input symbol value. Then there are two handlers for success and failure callbacks. The success handler is the interesting part - it receives the stock quote as a result and assigns its values to various 'holes' in the stock display elements. The data that comes back over the wire is JSON and it looks like this: { "Symbol":"MSFT", "Company":"Microsoft Corpora", "OpenPrice":26.11, "LastPrice":26.01, "NetChange":0.02, "LastQuoteTime":"2011-11-03T02:00:00Z", "LastQuoteTimeString":"Nov. 11, 2011 4:20pm" } which is an object representation of the data. JavaScript can evaluate this JSON string back into an object easily and that's the reslut that gets passed to the success function. The quote data is then applied to existing page content by manually selecting items and applying them. There are other ways to do this more elegantly like using templates, but here we're only interested in seeing how the data is returned. The data in the object is typed - LastPrice is a number and QuoteTime is a date. Note about the date value: JavaScript doesn't have a date literal although the JSON embedded ISO string format used above ("2011-11-03T02:00:00Z") is becoming fairly standard for JSON serializers. However, JSON parsers don't deserialize dates by default and return them by string. This is why the StockQuote actually returns a string value of LastQuoteTimeString for the same date. ajaxMethodCallback always converts dates properly into 'real' dates and the example above uses the real date value along with a .formatDate() data extension (also in ww.jquery.js) to display the raw date properly. Errors and Exceptions So what happens if your code fails? For example if I pass an invalid stock symbol to the GetStockQuote() method you notice that the code does this: if (quote == null) throw new ApplicationException("Invalid Symbol passed."); CallbackHandler automatically pushes the exception message back to the client so it's easy to pick up the error message. Regardless of what kind of error occurs: Server side, client side, protocol errors - any error will fire the failure handler with an error object parameter. The error is returned to the client via a JSON response in the error callback. In the previous examples I called onPageError which is a generic routine in ww.jquery that displays a status message on the bottom of the screen. But of course you can also take over the error handling yourself: $("#btnStockQuote").click(function () { ajaxCallMethod("SampleService.ashx", "GetStockQuote", [$("#txtSymbol").val()], function (quote) { $("#divStockDisplay").fadeIn(1000); $("#stockCompany").text(quote.Company + " (" + quote.Symbol + ")"); $("#stockLastPrice").text(quote.LastPrice); $("#stockQuoteTime").text(quote.LastQuoteTime.formatDate("MMM dd, hh:mmt")); }, function (error, xhr) { $("#divErrorDisplay").text(error.message).fadeIn(1000); }); }); The error object has a isCallbackError, message and stackTrace properties, the latter of which is only populated when running in Debug mode, and this object is returned for all errors: Client side, transport and server side errors. Regardless of which type of error you get the same object passed (as well as the XHR instance optionally) which makes for a consistent error retrieval mechanism. Specifying HttpVerbs You can also specify HTTP Verbs that are allowed using the AllowedHttpVerbs option on the CallbackMethod attribute: [CallbackMethod(AllowedHttpVerbs=HttpVerbs.GET | HttpVerbs.POST)] public string HelloWorld(string name) { … } If you're building REST style API's this might be useful to force certain request semantics onto the client calling. For the above if call with a non-allowed HttpVerb the request returns a 405 error response along with a JSON (or XML) error object result. The default behavior is to allow all verbs access (HttpVerbs.All). Passing in object Parameters Up to now the parameters I passed were very simple. But what if you need to send something more complex like an object or an array? Let's look at another example now that passes an object from the client to the server. Keeping with the Stock theme here lets add a method called BuyOrder that lets us buy some shares for a stock. Consider the following service method that receives an StockBuyOrder object as a parameter: [CallbackMethod] public string BuyStock(StockBuyOrder buyOrder) { var server = new StockServer(); var quote = server.GetStockQuote(buyOrder.Symbol); if (quote == null) throw new ApplicationException("Invalid or missing stock symbol."); return string.Format("You're buying {0} shares of {1} ({2}) stock at {3} for a total of {4} on {5}.", buyOrder.Quantity, quote.Company, quote.Symbol, quote.LastPrice.ToString("c"), (quote.LastPrice * buyOrder.Quantity).ToString("c"), buyOrder.BuyOn.ToString("MMM d")); } public class StockBuyOrder { public string Symbol { get; set; } public int Quantity { get; set; } public DateTime BuyOn { get; set; } public StockBuyOrder() { BuyOn = DateTime.Now; } } This is a contrived do-nothing example that simply echoes back what was passed in, but it demonstrates how you can pass complex data to a callback method. On the client side we now have a very simple form that captures the three values on a form: <fieldset> <legend>Post a Stock Buy Order</legend> Enter a symbol: <input type="text" name="txtBuySymbol" id="txtBuySymbol" value="GLD" />   Qty: <input type="text" name="txtBuyQty" id="txtBuyQty" value="10" style="width: 50px" />   Buy on: <input type="text" name="txtBuyOn" id="txtBuyOn" value="<%= DateTime.Now.ToString("d") %>" style="width: 70px;" /> <input type="button" id="btnBuyStock" value="Buy Stock" /> <div id="divStockBuyMessage" class="errordisplay" style="display:none"></div> </fieldset> The completed form and demo then looks something like this: The client side code that picks up the input values and assigns them to object properties and sends the AJAX request looks like this: $("#btnBuyStock").click(function () { // create an object map that matches StockBuyOrder signature var buyOrder = { Symbol: $("#txtBuySymbol").val(), Quantity: $("#txtBuyQty").val() * 1, // number Entered: new Date() } ajaxCallMethod("SampleService.ashx", "BuyStock", [buyOrder], function (result) { $("#divStockBuyMessage").text(result).fadeIn(1000); }, onPageError); }); The code creates an object and attaches the properties that match the server side object passed to the BuyStock method. Each property that you want to update needs to be included and the type must match (ie. string, number, date in this case). Any missing properties will not be set but also not cause any errors. Pass POST data instead of Objects In the last example I collected a bunch of values from form variables and stuffed them into object variables in JavaScript code. While that works, often times this isn't really helping - I end up converting my types on the client and then doing another conversion on the server. If lots of input controls are on a page and you just want to pick up the values on the server via plain POST variables - that can be done too - and it makes sense especially if you're creating and filling the client side object only to push data to the server. Let's add another method to the server that once again lets us buy a stock. But this time let's not accept a parameter but rather send POST data to the server. Here's the server method receiving POST data: [CallbackMethod] public string BuyStockPost() { StockBuyOrder buyOrder = new StockBuyOrder(); buyOrder.Symbol = Request.Form["txtBuySymbol"]; ; int qty; int.TryParse(Request.Form["txtBuyQuantity"], out qty); buyOrder.Quantity = qty; DateTime time; DateTime.TryParse(Request.Form["txtBuyBuyOn"], out time); buyOrder.BuyOn = time; // Or easier way yet //FormVariableBinder.Unbind(buyOrder,null,"txtBuy"); var server = new StockServer(); var quote = server.GetStockQuote(buyOrder.Symbol); if (quote == null) throw new ApplicationException("Invalid or missing stock symbol."); return string.Format("You're buying {0} shares of {1} ({2}) stock at {3} for a total of {4} on {5}.", buyOrder.Quantity, quote.Company, quote.Symbol, quote.LastPrice.ToString("c"), (quote.LastPrice * buyOrder.Quantity).ToString("c"), buyOrder.BuyOn.ToString("MMM d")); } Clearly we've made this server method take more code than it did with the object parameter. We've basically moved the parameter assignment logic from the client to the server. As a result the client code to call this method is now a bit shorter since there's no client side shuffling of values from the controls to an object. $("#btnBuyStockPost").click(function () { ajaxCallMethod("SampleService.ashx", "BuyStockPost", [], // Note: No parameters - function (result) { $("#divStockBuyMessage").text(result).fadeIn(1000); }, onPageError, // Force all page Form Variables to be posted { postbackMode: "Post" }); }); The client simply calls the BuyStockQuote method and pushes all the form variables from the page up to the server which parses them instead. The feature that makes this work is one of the options you can pass to the ajaxCallMethod() function: { postbackMode: "Post" }); which directs the function to include form variable POST data when making the service call. Other options include PostNoViewState (for WebForms to strip out WebForms crap vars), PostParametersOnly (default), None. If you pass parameters those are always posted to the server except when None is set. The above code can be simplified a bit by using the FormVariableBinder helper, which can unbind form variables directly into an object: FormVariableBinder.Unbind(buyOrder,null,"txtBuy"); which replaces the manual Request.Form[] reading code. It receives the object to unbind into, a string of properties to skip, and an optional prefix which is stripped off form variables to match property names. The component is similar to the MVC model binder but it's independent of MVC. Returning non-JSON Data CallbackHandler also supports returning non-JSON/XML data via special return types. You can return raw non-JSON encoded strings like this: [CallbackMethod(ReturnAsRawString=true,ContentType="text/plain")] public string HelloWorldNoJSON(string name) { return "Hello " + name + ". Time is: " + DateTime.Now.ToString(); } Calling this method results in just a plain string - no JSON encoding with quotes around the result. This can be useful if your server handling code needs to return a string or HTML result that doesn't fit well for a page or other UI component. Any string output can be returned. You can also return binary data. Stream, byte[] and Bitmap/Image results are automatically streamed back to the client. Notice that you should set the ContentType of the request either on the CallbackMethod attribute or using Response.ContentType. This ensures the Web Server knows how to display your binary response. Using a stream response makes it possible to return any of data. Streamed data can be pretty handy to return bitmap data from a method. The following is a method that returns a stock history graph for a particular stock over a provided number of years: [CallbackMethod(ContentType="image/png",RouteUrl="stocks/history/graph/{symbol}/{years}")] public Stream GetStockHistoryGraph(string symbol, int years = 2,int width = 500, int height=350) { if (width == 0) width = 500; if (height == 0) height = 350; StockServer server = new StockServer(); return server.GetStockHistoryGraph(symbol,"Stock History for " + symbol,width,height,years); } I can now hook this up into the JavaScript code when I get a stock quote. At the end of the process I can assign the URL to the service that returns the image into the src property and so force the image to display. Here's the changed code: $("#btnStockQuote").click(function () { var symbol = $("#txtSymbol").val(); ajaxCallMethod("SampleService.ashx", "GetStockQuote", [symbol], function (quote) { $("#divStockDisplay").fadeIn(1000); $("#stockCompany").text(quote.Company + " (" + quote.Symbol + ")"); $("#stockLastPrice").text(quote.LastPrice); $("#stockQuoteTime").text(quote.LastQuoteTime.formatDate("MMM dd, hh:mmt")); // display a stock chart $("#imgStockHistory").attr("src", "stocks/history/graph/" + symbol + "/2"); },onPageError); }); The resulting output then looks like this: The charting code uses the new ASP.NET 4.0 Chart components via code to display a bar chart of the 2 year stock data as part of the StockServer class which you can find in the sample download. The ability to return arbitrary data from a service is useful as you can see - in this case the chart is clearly associated with the service and it's nice that the graph generation can happen off a handler rather than through a page. Images are common resources, but output can also be PDF reports, zip files for downloads etc. which is becoming increasingly more common to be returned from REST endpoints and other applications. Why reinvent? Obviously the examples I've shown here are pretty basic in terms of functionality. But I hope they demonstrate the core features of AJAX callbacks that you need to work through in most applications which is simple: return data, send back data and potentially retrieve data in various formats. While there are other solutions when it comes down to making AJAX callbacks and servicing REST like requests, I like the flexibility my home grown solution provides. Simply put it's still the easiest solution that I've found that addresses my common use cases: AJAX JSON RPC style callbacks Url based access XML and JSON Output from single method endpoint XML and JSON POST support, querystring input, routing parameter mapping UrlEncoded POST data support on callbacks Ability to return stream/raw string data Essentially ability to return ANYTHING from Service and pass anything All these features are available in various solutions but not together in one place. I've been using this code base for over 4 years now in a number of projects both for myself and commercial work and it's served me extremely well. Besides the AJAX functionality CallbackHandler provides, it's also an easy way to create any kind of output endpoint I need to create. Need to create a few simple routines that spit back some data, but don't want to create a Page or View or full blown handler for it? Create a CallbackHandler and add a method or multiple methods and you have your generic endpoints. It's a quick and easy way to add small code pieces that are pretty efficient as they're running through a pretty small handler implementation. I can have this up and running in a couple of minutes literally without any setup and returning just about any kind of data. Resources Download the Sample NuGet: Westwind Web and AJAX Utilities (Westwind.Web) ajaxCallMethod() Documentation Using the AjaxMethodCallback WebForms Control West Wind Web Toolkit Home Page West Wind Web Toolkit Source Code © Rick Strahl, West Wind Technologies, 2005-2011Posted in ASP.NET jQuery AJAX Tweet (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

Start a Mapping or Process Flow from OWB Browser

- by Dong Ruirong

Basically, we start a Mapping or Process Flow from Oracle Warehouse Builder (OWB) Design Client. But actually we can also start a Mapping or Process Flow from OWB Browser. This paper will introduce the Start Report first and then introduce how to start/rerun a Mapping or Process Flow from OWB Browser. Start Report Start Report is used to start an execution of a Mapping or Process Flow. So there are two kinds of Start Report: Mapping Start Report (See Figure 1) and Process Flow Start Report (See Figure 2). Start Report shows the Mapping or Process Flow identification properties, including latest deployment and latest execution, lists all execution parameters for the Mapping or Process Flow, which were specified by the latest deployment, and assigns parameter default values from the latest deployment specification. You can do a couple of things from Start Report: Sort execution parameters on name, category. Table 1 lists all parameters of a Mapping. Table 2 lists all parameters of a Process Flow. Change values of any input parameter where permitted. For some parameters, selection lists are provided. For example, Mapping’s parameter Audit Level has a selection list. Reset all parameter settings to their default values. Apply basic validation to parameter values before starting an execution. Start the Mapping or Process Flow, which means it is executed immediately. Navigate to Deployment Report for latest deployment details of the Mapping or Process Flow. Navigate to Execution Job Report for latest execution of current Mapping or Process Flow Link to on-link help Warehouse Report Page, Deployment Report, Execution Report, Execution Schedule Report and Execution Summary Report. Figure 1 Mapping Start Report Table 1 Execution Parameters and default values for a Mapping Category Name Mode Input Value System Audit Level In Error Details System Bulk Size In 1000 System Commit Frequency In 1000 System EXECUTE_RESUME_TASK In FALSE System FORCE_RESUME_OPTION In FALSE System Max No of Errors In 50 System NUMBER_OF_TIMES_TO_RETRY In 2 System Operating Mode In Set Based Fail Over to Row Based System PARALLEL_LEVEL In 0 System Procedure Name In main System Purge Group In WB Figure 2 Process Flow Start Report Table 2 Execution Parameters and default values for a Process Flow Category Name Mode Input Value System EVAL_LOCATION In System Item Key In-Out System Item Type In PFPKG_1 Start a Mapping or Process Flow To navigate to Start Report, it’s better to login OWB Browser with Control Center option; if not, after logging in OWB Browser, go to Control Center first. Then you can follow the ways introduced in this section to navigate to Start Report. One more thing you need to pay attention to is that you are not allowed to deploy any Mappings and Process Flows from OWB Browser as it’s not supported. So it’s necessary to deploy the Mappings and Process Flows first before starting them from OWB Browser. If you have deployed a Mapping or Process Flow but have not started it, please navigate from Object Summary Report or Deployment Schedule Report to Start Report. 1. Navigating from Object Summary Report to Start Report Open the Object Summary Report to see all deployed Mappings and Process Flows. Click the Mapping Name or Process Flow Name link to see its Deployment Report. Select the Start link in the Available Reports tab for the given Mapping or Process Flow to display a Start Report for the Mapping or Process Flow. The execution parameters have the default deployment-time settings. Change any of the input parameter values as required. Click Start Execution button to execute the Mapping or Process Flow. 2. Navigating from Deployment Schedule Report to Start Report Open the Deployment Schedule Report to see deployment details of Mapping and Process Flow. Expand the project trees to find the deployed Mappings and Process Flows. Click the Mapping Name or Process Flow Name link to see its Deployment Report. Select the Start link in the Available Reports tab for the given Mapping or Process Flow to display a Start Report for the Mapping or Process Flow. The execution parameters have the default deployment-time settings. Change any of the input parameter values as required. Click Start Execution button to execute the Mapping or Process Flow. Re-run a Mapping or Process Flow If you have executed a Mapping or Process Flow, you can navigate from Object Summary Report, Deployment Schedule Report, Execution Summary Report or Execution Schedule Report to Start Report. 1. Navigating from the Execution Summary Report to Start Report Open the Execution Summary Report to see all execution jobs including Mapping jobs and Process Flow jobs. Click on the Mapping Name or Process Flow Name to see its Execution Report. Select the Start link in the Available Reports tab for the given Mapping or Process Flow to display a Start Report for the Mapping or Process Flow. The execution parameters have the default deployment-time settings. Change any of the input parameter values as required. Click Start Execution button to execute the Mapping or Process Flow. 2. Navigating from the Execution Schedule Report to Start Report Open the Execution Schedule Report to see list of all executions of Mapping and Process Flow. Click on the Mapping Name or Process Flow Name to see its Execution Report. Select the Start link in the Available Reports tab for the given Mapping or Process Flow to display a Start Report for the Mapping or Process Flow. The execution parameters have the default deployment-time settings. Change any of the input parameter values as required. Click Start Execution button to execute the Mapping or Process Flow. If the execution of a Mapping or Process Flow is successful, you will see this message from the Start Report: Start Execution request successful. (See Figure 3) Figure 3 Execution Result You can also confirm the execution of the Mapping or Process Flow by referring to Execution Report of the current Mapping or Process Flow by clicking the link in the Available Reports tab for the given Mapping or Process Flow. One new record of execution job details is added to Execution Report of the Mapping or Process Flow which shows the details of the execution such as Start Time, Elapsed Time, Status, the number of records selected, inserted, updated, deleted etc.

Read the article

How-to delete a tree node using the context menu

- by frank.nimphius

Hierarchical trees in Oracle ADF make use of View Accessors, which means that only the top level node needs to be exposed as a View Object instance on the ADF Business Components Data Model. This also means that only the top level node has a representation in the PageDef file as a tree binding and iterator binding reference. Detail nodes are accessed through tree rule definitions that use the accessor mentioned above (or nested collections in the case of POJO or EJB business services). The tree component is configured for single node selection, which however can be declaratively changed for users to press the ctrl key and selecting multiple nodes. In the following, I explain how to create a context menu on the tree for users to delete the selected tree nodes. For this, the context menu item will access a managed bean, which then determines the selected node(s), the internal ADF node bindings and the rows they represent. As mentioned, the ADF Business Components Data Model only needs to expose the top level node data sources, which in this example is an instance of the Locations View Object. For the tree to work, you need to have associations defined between entities, which usually is done for you by Oracle JDeveloper if the database tables have foreign keys defined Note: As a general hint of best practices and to simplify your life: Make sure your database schema is well defined and designed before starting your development project. Don't treat the database as something organic that grows and changes with the requirements as you proceed in your project. Business service refactoring in response to database changes is possible, but should be treated as an exception, not the rule. Good database design is a necessity – even for application developers – and nothing evil. To create the tree component, expand the Data Controls panel and drag the View Object collection to the view. From the context menu, select the tree component entry and continue with defining the tree rules that make up the hierarchical structure. As you see, when pressing the green plus icon in the Edit Tree Binding dialog, the data structure, Locations - Departments – Employees in my sample, shows without you having created a View Object instance for each of the nodes in the ADF Business Components Data Model. After you configured the tree structure in the Edit Tree Binding dialog, you press OK and the tree is created. Select the tree in the page editor and open the Structure Window (ctrl+shift+S). In the Structure window, expand the tree node to access the conextMenu facet. Use the right mouse button to insert a Popup into the facet. Repeat the same steps to insert a Menu and a Menu Item into the Popup you created. The Menu item text should be changed to something meaningful like "Delete". Note that the custom menu item later is added to the context menu together with the default context menu options like expand and expand all. To define the action that is executed when the menu item is clicked on, you select the Action Listener property in the Property Inspector and click the arrow icon followed by the Edit menu option. Create or select a managed bean and define a method name for the action handler. Next, select the tree component and browse to its binding property in the Property Inspector. Again, use the arrow icon | Edit option to create a component binding in the same managed bean that has the action listener defined. The tree handle is used in the action listener code, which is shown below: public void onTreeNodeDelete(ActionEvent actionEvent) { //access the tree from the JSF component reference created //using the af:tree "binding" property. The "binding" property //creates a pair of set/get methods to access the RichTree instance RichTree tree = this.getTreeHandler(); //get the list of selected row keys RowKeySet rks = tree.getSelectedRowKeys(); //access the iterator to loop over selected nodes Iterator rksIterator = rks.iterator(); //The CollectionModel represents the tree model and is //accessed from the tree "value" property CollectionModel model = (CollectionModel) tree.getValue(); //The CollectionModel is a wrapper for the ADF tree binding //class, which is JUCtrlHierBinding JUCtrlHierBinding treeBinding = (JUCtrlHierBinding) model.getWrappedData(); //loop over the selected nodes and delete the rows they //represent while(rksIterator.hasNext()){ List nodeKey = (List) rksIterator.next(); //find the ADF node binding using the node key JUCtrlHierNodeBinding node = treeBinding.findNodeByKeyPath(nodeKey); //delete the row. Row rw = node.getRow(); rw.remove(); } //only refresh the tree if tree nodes have been selected if(rks.size() > 0){ AdfFacesContext adfFacesContext = AdfFacesContext.getCurrentInstance(); adfFacesContext.addPartialTarget(tree); } } Note: To enable multi node selection for a tree, select the tree and change the row selection setting from "single" to "multiple". Note: a fully pictured version of this post will become available at the end of the month in a PDF summary on ADF Code Corner : http://www.oracle.com/technetwork/developer-tools/adf/learnmore/index-101235.html

Read the article

Lambda’s for .NET made easy…

- by mbcrump

The purpose of my blog is to explain things for a beginner to intermediate c# programmer. I’ve seen several blog post that use lambda expressions always assuming the audience is familiar with them. The purpose of this post is to make them simple and easily understood. Let’s begin with a definition. A lambda expression is an anonymous function that can contain expressions and statements, and can be used to create delegates or expression tree types. So anonymous function… delegates or expression tree types? I don’t get it??? Confused yet? Lets break this into a few definitions and jump right into the code. anonymous function – is an "inline" statement or expression that can be used wherever a delegate type is expected. delegate - is a type that references a method. Once a delegate is assigned a method, it behaves exactly like that method. The delegate method can be used like any other method, with parameters and a return value. Expression trees - represent code in a tree-like data structure, where each node is an expression, for example, a method call or a binary operation such as x < y. Don’t worry if this still sounds confusing, lets jump right into the code with a simple 3 line program. We are going to use a Function Delegate (all you need to remember is that this delegate returns a value.) Lambda expressions are used most commonly with the Func and Action delegates, so you will see an example of both of these. Lambda Expression 3 lines. using System; using System.Collections.Generic; using System.Linq; using System.Text; namespace ConsoleApplication7 { class Program { static void Main(string[] args) { Func<int, int> myfunc = x => x *x; Console.WriteLine(myfunc(6).ToString()); Console.ReadLine(); } } } Is equivalent to Old way of doing it. using System; using System.Collections.Generic; using System.Linq; using System.Text; namespace ConsoleApplication7 { class Program { static void Main(string[] args) { Console.WriteLine(myFunc(6).ToString()); Console.ReadLine(); } static int myFunc(int x) { return x * x; } } } In the example, there is a single parameter, x, and the expression is x*x. I’m going to stop here to make sure you are still with me. A lambda expression is an unnamed method written in place of a delegate instance. In other words, the compiler converts the lambda expression to either a : A delegate instance An expression tree All lambda have the following form: (parameters) => expression or statement block Now look back to the ones we have created. It should start to sink in. Don’t get stuck on the => form, use it as an identifier of a lambda. A Lamba expression can also be written in the following form: Lambda Expression. using System; using System.Collections.Generic; using System.Linq; using System.Text; namespace ConsoleApplication7 { class Program { static void Main(string[] args) { Func<int, int> myFunc = x => { return x * x; }; Console.WriteLine(myFunc(6).ToString()); Console.ReadLine(); } } } This form may be easier to read but consumes more space. Lets try an Action delegate – this delegate does not return a value. Action Delegate example. using System; using System.Collections.Generic; using System.Linq; using System.Text; namespace ConsoleApplication7 { class Program { static void Main(string[] args) { Action<string> myAction = (string x) => { Console.WriteLine(x); }; myAction("michael has made this so easy"); Console.ReadLine(); } } } Lambdas can also capture outer variables (such as the example below) A lambda expression can reference the local variables and parameters of the method in which it’s defined. Outer variables referenced by a lambda expression are called captured variables. Capturing Outer Variables using System; using System.Collections.Generic; using System.Linq; using System.Text; namespace ConsoleApplication7 { class Program { static void Main(string[] args) { string mike = "Michael"; Action<string> myAction = (string x) => { Console.WriteLine("{0}{1}", mike, x); }; myAction(" has made this so easy"); Console.ReadLine(); } } } Lamba’s can also with a strongly typed list to loop through a collection. Used w a strongly typed list. using System; using System.Collections.Generic; using System.Linq; using System.Text; namespace ConsoleApplication7 { class Program { static void Main(string[] args) { List<string> list = new List<string>() { "1", "2", "3", "4" }; list.ForEach(s => Console.WriteLine(s)); Console.ReadLine(); } } } Outputs: 1 2 3 4 I think this will get you started with Lambda’s, as always consult the MSDN documentation for more information. Still confused? Hopefully you are not.

Read the article

Online ALTER TABLE in MySQL 5.6

- by Marko Mäkelä

This is the low-level view of data dictionary language (DDL) operations in the InnoDB storage engine in MySQL 5.6. John Russell gave a more high-level view in his blog post April 2012 Labs Release – Online DDL Improvements. MySQL before the InnoDB Plugin Traditionally, the MySQL storage engine interface has taken a minimalistic approach to data definition language. The only natively supported operations were CREATE TABLE, DROP TABLE and RENAME TABLE. Consider the following example: CREATE TABLE t(a INT); INSERT INTO t VALUES (1),(2),(3); CREATE INDEX a ON t(a); DROP TABLE t; The CREATE INDEX statement would be executed roughly as follows: CREATE TABLE temp(a INT, INDEX(a)); INSERT INTO temp SELECT * FROM t; RENAME TABLE t TO temp2; RENAME TABLE temp TO t; DROP TABLE temp2; You could imagine that the database could crash when copying all rows from the original table to the new one. For example, it could run out of file space. Then, on restart, InnoDB would roll back the huge INSERT transaction. To fix things a little, a hack was added to ha_innobase::write_row for committing the transaction every 10,000 rows. Still, it was frustrating that even a simple DROP INDEX would make the table unavailable for modifications for a long time. Fast Index Creation in the InnoDB Plugin of MySQL 5.1 MySQL 5.1 introduced a new interface for CREATE INDEX and DROP INDEX. The old table-copying approach can still be forced by SET old_alter_table=0. This interface is used in MySQL 5.5 and in the InnoDB Plugin for MySQL 5.1. Apart from the ability to do a quick DROP INDEX, the main advantage is that InnoDB will execute a merge-sort algorithm before inserting the index records into each index that is being created. This should speed up the insert into the secondary index B-trees and potentially result in a better B-tree fill factor. The 5.1 ALTER TABLE interface was not perfect. For example, DROP FOREIGN KEY still invoked the table copy. Renaming columns could conflict with InnoDB foreign key constraints. Combining ADD KEY and DROP KEY in ALTER TABLE was problematic and not atomic inside the storage engine. The ALTER TABLE interface in MySQL 5.6 The ALTER TABLE storage engine interface was completely rewritten in MySQL 5.6. Instead of introducing a method call for every conceivable operation, MySQL 5.6 introduced a handful of methods, and data structures that keep track of the requested changes. In MySQL 5.6, online ALTER TABLE operation can be requested by specifying LOCK=NONE. Also LOCK=SHARED and LOCK=EXCLUSIVE are available. The old-style table copying can be requested by ALGORITHM=COPY. That one will require at least LOCK=SHARED. From the InnoDB point of view, anything that is possible with LOCK=EXCLUSIVE is also possible with LOCK=SHARED. Most ALGORITHM=INPLACE operations inside InnoDB can be executed online (LOCK=NONE). InnoDB will always require an exclusive table lock in two phases of the operation. The execution phases are tied to a number of methods: handler::check_if_supported_inplace_alter Checks if the storage engine can perform all requested operations, and if so, what kind of locking is needed. handler::prepare_inplace_alter_table InnoDB uses this method to set up the data dictionary cache for upcoming CREATE INDEX operation. We need stubs for the new indexes, so that we can keep track of changes to the table during online index creation. Also, crash recovery would drop any indexes that were incomplete at the time of the crash. handler::inplace_alter_table In InnoDB, this method is used for creating secondary indexes or for rebuilding the table. This is the ‘main’ phase that can be executed online (with concurrent writes to the table). handler::commit_inplace_alter_table This is where the operation is committed or rolled back. Here, InnoDB would drop any indexes, rename any columns, drop or add foreign keys, and finalize a table rebuild or index creation. It would also discard any logs that were set up for online index creation or table rebuild. The prepare and commit phases require an exclusive lock, blocking all access to the table. If MySQL times out while upgrading the table meta-data lock for the commit phase, it will roll back the ALTER TABLE operation. In MySQL 5.6, data definition language operations are still not fully atomic, because the data dictionary is split. Part of it is inside InnoDB data dictionary tables. Part of the information is only available in the *.frm file, which is not covered by any crash recovery log. But, there is a single commit phase inside the storage engine. Online Secondary Index Creation It may occur that an index needs to be created on a new column to speed up queries. But, it may be unacceptable to block modifications on the table while creating the index. It turns out that it is conceptually not so hard to support online index creation. All we need is some more execution phases: Set up a stub for the index, for logging changes. Scan the table for index records. Sort the index records. Bulk load the index records. Apply the logged changes. Replace the stub with the actual index. Threads that modify the table will log the operations to the logs of each index that is being created. Errors, such as log overflow or uniqueness violations, will only be flagged by the ALTER TABLE thread. The log is conceptually similar to the InnoDB change buffer. The bulk load of index records will bypass record locking. We still generate redo log for writing the index pages. It would suffice to log page allocations only, and to flush the index pages from the buffer pool to the file system upon completion. Native ALTER TABLE Starting with MySQL 5.6, InnoDB supports most ALTER TABLE operations natively. The notable exceptions are changes to the column type, ADD FOREIGN KEY except when foreign_key_checks=0, and changes to tables that contain FULLTEXT indexes. The keyword ALGORITHM=INPLACE is somewhat misleading, because certain operations cannot be performed in-place. For example, changing the ROW_FORMAT of a table requires a rebuild. Online operation (LOCK=NONE) is not allowed in the following cases: when adding an AUTO_INCREMENT column, when the table contains FULLTEXT indexes or a hidden FTS_DOC_ID column, or when there are FOREIGN KEY constraints referring to the table, with ON…CASCADE or ON…SET NULL option. The FOREIGN KEY limitations are needed, because MySQL does not acquire meta-data locks on the child or parent tables when executing SQL statements. Theoretically, InnoDB could support operations like ADD COLUMN and DROP COLUMN in-place, by lazily converting the table to a newer format. This would require that the data dictionary keep multiple versions of the table definition. For simplicity, we will copy the entire table, even for DROP COLUMN. The bulk copying of the table will bypass record locking and undo logging. For facilitating online operation, a temporary log will be associated with the clustered index of table. Threads that modify the table will also write the changes to the log. When altering the table, we skip all records that have been marked for deletion. In this way, we can simply discard any undo log records that were not yet purged from the original table. Off-page columns, or BLOBs, are an important consideration. We suspend the purge of delete-marked records if it would free any off-page columns from the old table. This is because the BLOBs can be needed when applying changes from the log. We have special logging for handling the ROLLBACK of an INSERT that inserted new off-page columns. This is because the columns will be freed at rollback.

Read the article

Benefits of Behavior Driven Development

- by Aligned

Originally posted on: http://geekswithblogs.net/Aligned/archive/2013/07/26/benefits-of-behavior-driven-development.aspxContinuing my previous article on BDD, I wanted to point out some benefits of BDD and since BDD is an extension of Test Driven Development (TDD), you get those as well. I’ll add another article on some possible downsides of this approach. There are many articles about the benefits of TDD and they apply to BDD. I’ve pointed out some here and copied some of the main points for each article, but there are many more including the book The Art of Unit Testing by Roy Osherove. http://geekswithblogs.net/leesblog/archive/2008/04/30/the-benefits-of-test-driven-development.aspx (Lee Brandt) Stability Accountability Design Ability Separated Concerns Progress Indicator http://tddftw.com/benefits-of-tdd/ Help maintainers understand the intention behind the code Bring validation and proper data handling concerns to the forefront. Writing the tests first is fun. Better APIs come from writing testable code. TDD will make you a better developer. http://www.slideshare.net/dhelper/benefit-from-unit-testing-in-the-real-world (from Typemock). Take a look at the slides, especially the extra time required for TDD (slide 10) and the next one of the bugs avoided using TDD (slide 11). Less bugs (slide 11) about testing and development (13) Increase confidence in code (14) Fearlessly change your code (14) Document Requirements (14) also see http://visualstudiomagazine.com/articles/2013/06/01/roc-rocks.aspx Discover usability issues early (14) All these points and articles are great and there are many more. The following are my additions to the benefits of BDD from using it in real projects for my company. July 2013 on MSDN - Behavior-Driven Design with SpecFlow Scott Allen did a very informative TDD and MVC module, but to me he is doing BDDCompile and Execute Requirements in Microsoft .NET ~ Video from TechEd 2012 Communication I was working through a complicated task that the decision tree kept growing. After writing out the Given, When, Then of the scenario, I was able tell QA what I had worked through for their initial test cases. They were able to add from there. It is also useful to use this language with other developers, managers, or clients to help make informed decisions on if it meets the requirements or if it can simplified to save time (money). Thinking through solutions, before starting to code This was the biggest benefit to me. I like to jump into coding to figure out the problem. Many times I don't understand my path well enough and have to do some parts over. A past supervisor told me several times during reviews that I need to get better at seeing "the forest for the trees". When I sit down and write out the behavior that I need to implement, I force myself to think things out further and catch scenarios before they get to QA. A co-worker that is new to BDD and we’ve been using it in our new project for the last 6 months, said “It really clarifies things”. It took him awhile to understand it all, but now he’s seeing the value of this approach (yes there are some downsides, but that is a different issue). Developers’ Confidence This is huge for me. With tests in place, my confidence grows that I won’t break code that I’m not directly changing. In the past, I’ve worked on projects with out tests and we would frequently find regression bugs (or worse the users would find them). That isn’t fun. We don’t catch all problems with the tests, but when QA catches one, I can write a test to make sure it doesn’t happen again. It’s also good for Releasing code, telling your manager that it’s good to go. As time goes on and the code gets older, how confident are you that checking in code won’t break something somewhere else? Merging code - pre release confidence If you’re merging code a lot, it’s nice to have the tests to help ensure you didn’t merge incorrectly. Interrupted work I had a task that I started and planned out, then was interrupted for a month because of different priorities. When I started it up again, and un-shelved my changes, I had the BDD specs and it helped me remember what I had figured out and what was left to do. It would have much more difficult without the specs and tests. Testing and verifying complicated scenarios Sometimes in the UI there are scenarios that get tricky, because there are a lot of steps involved (click here to open the dialog, enter the information, make sure it’s valid, when I click cancel it should do {x}, when I click ok it should close and do {y}, then do this, etc….). With BDD I can avoid some of the mouse clicking define the scenarios and have them re-run quickly, without using a mouse. UI testing is still needed, but this helps a bunch. The same can be true for tricky server logic. Documentation of Assumptions and Specifications The BDD spec tests (Jasmine or SpecFlow or other tool) also work as documentation and show what the original developer was trying to accomplish. It’s not a different Word document, so developers will keep this up to date, instead of letting it become obsolete. What happens if you leave the project (consulting, new job, etc) with no specs or at the least good comments in the code? Sometimes I think of a new scenario, so I add a failing spec and continue in the same stream of thought (don’t forget it because it was on a piece of paper or in a notepad). Then later I can come back and handle it and have it documented. Jasmine tests and JavaScript –> help deal with the non-typed system I like JavaScript, but I also dislike working with JavaScript. I miss C# telling me if a property doesn’t actually exist at build time. I like the idea of TypeScript and hope to use it more in the future. I also use KnockoutJs, which has observables that need to be called with ending (), since the observable is a function. It’s hard to remember when to use () or not and the Jasmine specs/tests help ensure the correct usage. This should give you an idea of the benefits that I see in using the BDD approach. I’m sure there are more. It talks a lot of practice, investment and experimentation to figure out how to approach this and to get comfortable with it. I agree with Scott Allen in the video I linked above “Remember that TDD can take some practice. So if you're not doing test-driven design right now? You can start and practice and get better. And you'll reach a point where you'll never want to get back.”

Read the article

Complex event system for DungeonKeeper like game

- by paul424

I am working on opensource GPL3 game. http://opendungeons.sourceforge.net/ , new coders would be welcome. Now there's design question regarding Event System: We want to improve the game logic, that is program a new event system. I will just repost what's settled up already on http://forum.freegamedev.net/viewtopic.php?f=45&t=3033. From the discussion came the idea of the Publisher / Subscriber pattern + "domains": My current idea is to use the subscirbers / publishers model. Its similar to Observable pattern, but instead one subscribes to Events types, not Object's Events. For each Event would like to have both static and dynamic type. Static that is its's type would be resolved by belonging to the proper inherited class from Event. That is from Event we would have EventTile, EventCreature, EvenMapLoader, EventGameMap etc. From that there are of course subtypes like EventCreature would be EventKobold, EventKnight, EventTentacle etc. The listeners would collect the event from publishers, and send them subcribers , each of them would be a global singleton. The Listeners type hierachy would exactly mirror the type hierarchy of Events. In each constructor of Event type, the created instance would notify the proper listeners. That is when calling EventKnight the proper ctor would notify the Listeners : EventListener, CreatureLisener and KnightListener. The default action for an listner would be to notify all subscribers, but there would be some exceptions , like EventAttack would notify AttackListener which would dispatch event by the dynamic part ( that is the Creature pointer or hash). Any comments ? #include <vector> class Subscriber; class SubscriberAttack; class Event{ private: int foo; int bar; protected: // static std::vector<Publisher*> publishersList; static std::vector<Subscriber*> subscribersList; static std::vector<Event*> eventQueue; public: Event(){ eventQueue.push_back(this); } static int subscribe(Subscriber* ss); static int unsubscribe(Subscriber* ss); //static int reg_publisher(Publisher* pp); //static int unreg_publisher(Publisher* pp); }; // class Publisher{ // }; class Subscriber{ public: int (*newEvent) (Event* ee); Subscriber( ){ Event::subscribe(this); } Subscriber( int (*fp) (Event* ee) ):newEvent(fp){ Subscriber(); } ~Subscriber(){ Event::unsubscribe(this); } }; class EventAttack: Event{ private: int foo; int bar; protected: // static std::vector<Publisher*> publishersList; static std::vector<SubscriberAttack*> subscribersList; static std::vector<EventAttack*> eventQueue; public: EventAttack(){ eventQueue.push_back(this); } static int subscribe(SubscriberAttack* ss); static int unsubscribe(SubscriberAttack* ss); //static int reg_publisher(Publisher* pp); //static int unreg_publisher(Publisher* pp); }; class AttackSubscriber :Subscriber{ public: int (*newEvent) (EventAttack* ee); AttackSubscriber( ){ EventAttack::subscribe(this); } AttackSubscriber( int (*fp) (EventAttack* ee) ):newEventAttack(fp){ AttackSubscriber(); } ~AttackSubscriber(){ EventAttack::unsubscribe(this); } }; From that point, others wanted the Subject-Observer pattern, that is one would subscribe to all event types produced by particular object. That way it came out to add the domain system : Huh, to meet the ability to listen to particular game's object events, I though of introducing entity domains . Domains are trees, which nodes are labeled by unique names for each level. ( like the www addresses ). Each Entity wanting to participate in our event system ( that is be able to publish / produce events ) should at least now its domain name. That would end up in Player1/Room/Treasury/#24 or Player1/Creature/Kobold/#3 producing events. The subscriber picks some part of a tree. For example by specifiing subtree with the root in one of the nodes like Player1/Room/* ,would subscribe us to all Players1's room's event, and Player1/Creature/Kobold/#3 would subscribe to Players' third kobold's event. Does such event system make sense to you ? I have many implementation details to ask as well, but first let's start some general discussion. Note1: Notice that in the case of a fight between two creatues fight , the creature being attacked would have to throw an event, becuase it is HE/SHE/IT who have its domain address. So that would be BeingAttackedEvent() etc. I will edit that post if some other reflections on this would come out. Note2: the existing class hierarchy might be used to get the domains addresses being build in constructor . In a ctor you would just add + ."className" to domain address. If you are in a class'es hierarchy leaf constructor one might use nextID , hash or any other charactteristic, just to make the addresses distinguishable . Note3:subscribing to all entity's Events would require knowledge of all possible events produced by this entity . This could be done in one function call, but information on E produced would have to be handled for every Entity. SmartNote4 : Finding proper subscribers in a tree would be easy. One would start in particular Leaf for example Player1/Creature/Kobold/#3 and go up one parent a time , notifiying each Subscriber in a Node ie. : Player1/Creature/Kobold/* , Player1/Creature/* , Player1/* etc, , up to a root that is /* .<<<< Note5: The Event system was needed to have some way of incorporating Angelscript code into application. So the Event dispatcher was to be a gate to A-script functions. But it came out to this one.

Read the article

Android programming. Application stopped unexpectedly.

- by user277704

I've just created a prototype of interface for my android app and tried to run it. Unfortunately I get an error that my app has stopped unexpectedly (my reputation doesn't allow me to post images so follow my links): screenshot of error message This is layout mode of editing. Everything looks as I want so there shouldn't be errors: mobileka.freehostia.com/3.png (I can post only one hyperlink...) This is my main.xml code: <code> <?xml version="1.0" encoding="utf-8"?> <RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android" android:orientation="vertical" android:layout_width="fill_parent" android:layout_height="fill_parent" android:gravity="top" android:background="@drawable/back" > <TextView android:id="@+id/score" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text = "@string/scoreT" android:textColor="@string/scoreColor" android:gravity = "left" android:typeface="serif" android:textStyle="bold|italic" android:textSize="16sp" android:paddingLeft = "10px" android:paddingTop="4px"/ <TextView android:id = "@+id/scoreTxt" android:layout_toRightOf="@+id/score" android:textSize="16sp" android:paddingTop = "5px" android:paddingLeft="4px" android:typeface="serif" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text=" 0" android:textColor="@string/scoreTextColor" android:gravity = "left"/> <TextView android:id = "@+id/scoreSeparator" android:layout_toRightOf="@+id/scoreTxt" android:textSize="16sp" android:paddingTop = "3px" android:paddingLeft="4px" android:typeface="serif" android:textStyle="bold" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="|" android:textColor="@string/scoreColor" android:gravity = "left"/> <TextView android:id = "@+id/timerTxt" android:layout_alignParentRight="true" android:textSize="16sp" android:paddingRight="10px" android:paddingTop="4px" android:typeface="serif" android:layout_width="wrap_content" android:layout_height="wrap_content" android:textColor="@string/scoreTextColor" android:gravity = "right" android:text="00:00" /> <TextView android:id = "@+id/timer" android:layout_toLeftOf="@+id/timerTxt" android:textColor="@string/scoreColor" android:layout_width="wrap_content" android:layout_height="wrap_content" android:textSize="16sp" android:padding = "3px" android:typeface="serif" android:textStyle="bold|italic" android:text="@string/timerT" android:gravity = "left"/> <TextView android:id = "@+id/timerSeparator" android:layout_toLeftOf="@+id/timer" android:textSize="16sp" android:paddingTop = "3px" android:paddingLeft="4px" android:typeface="serif" android:textStyle="bold" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="|" android:textColor="@string/scoreColor" android:gravity = "left"/> <ImageButton android:id="@+id/buttonOne" android:layout_below="@+id/score" android:layout_marginTop="40px" android:layout_marginLeft="14px" android:layout_width="wrap_content" android:layout_height="wrap_content" android:clickable="true" android:src="@drawable/inactive"/> <ImageButton android:id="@+id/buttonTwo" android:layout_toRightOf="@+id/buttonOne" android:layout_marginTop="63px" android:layout_marginLeft="10px" android:layout_width="wrap_content" android:layout_height="wrap_content" android:src="@drawable/inactive" /> <ImageButton android:id="@+id/buttonThree" android:layout_toRightOf="@+id/buttonTwo" android:layout_marginTop="63px" android:layout_marginLeft="10px" android:layout_width="wrap_content" android:layout_height="wrap_content" android:src="@drawable/inactive" /> <ImageButton android:id="@+id/buttonFour" android:layout_toRightOf="@+id/buttonThree" android:layout_marginTop="63px" android:layout_marginLeft="10px" android:layout_width="wrap_content" android:layout_height="wrap_content" android:src="@drawable/inactive" /> <ImageButton android:id="@+id/buttonFive" android:layout_below="@+id/buttonOne" android:layout_marginTop="40px" android:layout_marginLeft="14px" android:layout_width="wrap_content" android:layout_height="wrap_content" android:src="@drawable/inactive" /> <ImageButton android:id="@+id/buttonSix" android:layout_toRightOf="@+id/buttonFive" android:layout_marginTop="164px" android:layout_marginLeft="10px" android:layout_width="wrap_content" android:layout_height="wrap_content" android:src="@drawable/inactive" /> <ImageButton android:id="@+id/buttonSeven" android:layout_toRightOf="@+id/buttonSix" android:layout_marginTop="164px" android:layout_marginLeft="10px" android:layout_width="wrap_content" android:layout_height="wrap_content" android:src="@drawable/inactive" /> <ImageButton android:id="@+id/buttonEight" android:layout_toRightOf="@+id/buttonSeven" android:layout_marginTop="164px" android:layout_marginLeft="10px" android:layout_width="wrap_content" android:layout_height="wrap_content" android:src="@drawable/inactive" /> <ImageButton android:id="@+id/buttonNine" android:layout_below="@+id/buttonEight" android:layout_marginTop="40px" android:layout_marginLeft="14px" android:layout_width="wrap_content" android:layout_height="wrap_content" android:src="@drawable/inactive" /> <ImageButton android:id="@+id/buttonTen" android:layout_toRightOf="@+id/buttonNine" android:layout_marginTop="264px" android:layout_marginLeft="10px" android:layout_width="wrap_content" android:layout_height="wrap_content" android:src="@drawable/inactive" /> <ImageButton android:id="@+id/buttonEleven" android:layout_toRightOf="@+id/buttonTen" android:layout_marginTop="264px" android:layout_marginLeft="10px" android:layout_width="wrap_content" android:layout_height="wrap_content" android:src="@drawable/inactive" /> <ImageButton android:id="@+id/buttonTwelve" android:layout_toRightOf="@+id/buttonEleven" android:layout_marginTop="264px" android:layout_marginLeft="10px" android:layout_width="wrap_content" android:layout_height="wrap_content" android:src="@drawable/inactive" /> And this is my logcat errors (p.s. line #12 is the first TextView in main.xml): 03-26 22:59:31.670: WARN/dalvikvm(185): threadid=3: thread exiting with uncaught exception (group=0x4001b188) 03-26 22:59:31.727: ERROR/AndroidRuntime(185): Uncaught handler: thread main exiting due to uncaught exception 03-26 22:59:31.784: ERROR/AndroidRuntime(185): java.lang.RuntimeException: Unable to start activity ComponentInfo{kz.androidmarket.www.randomtest1/kz.androidmarket.www.randomtest1.randomTest1}: android.view.InflateException: Binary XML file line #12: Error inflating class 03-26 22:59:31.784: ERROR/AndroidRuntime(185): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2496) 03-26 22:59:31.784: ERROR/AndroidRuntime(185): at android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:2512) 03-26 22:59:31.784: ERROR/AndroidRuntime(185): at android.app.ActivityThread.access$2200(ActivityThread.java:119) 03-26 22:59:31.784: ERROR/AndroidRuntime(185): at android.app.ActivityThread$H.handleMessage(ActivityThread.java:1863) 03-26 22:59:31.784: ERROR/AndroidRuntime(185): at android.os.Handler.dispatchMessage(Handler.java:99) 03-26 22:59:31.784: ERROR/AndroidRuntime(185): at android.os.Looper.loop(Looper.java:123) 03-26 22:59:31.784: ERROR/AndroidRuntime(185): at android.app.ActivityThread.main(ActivityThread.java:4363) 03-26 22:59:31.784: ERROR/AndroidRuntime(185): at java.lang.reflect.Method.invokeNative(Native Method) 03-26 22:59:31.784: ERROR/AndroidRuntime(185): at java.lang.reflect.Method.invoke(Method.java:521) 03-26 22:59:31.784: ERROR/AndroidRuntime(185): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:860) 03-26 22:59:31.784: ERROR/AndroidRuntime(185): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:618) 03-26 22:59:31.784: ERROR/AndroidRuntime(185): at dalvik.system.NativeStart.main(Native Method) 03-26 22:59:31.784: ERROR/AndroidRuntime(185): Caused by: android.view.InflateException: Binary XML file line #12: Error inflating class 03-26 22:59:31.784: ERROR/AndroidRuntime(185): at android.view.LayoutInflater.createView(LayoutInflater.java:513) 03-26 22:59:31.784: ERROR/AndroidRuntime(185): at com.android.internal.policy.impl.PhoneLayoutInflater.onCreateView(PhoneLayoutInflater.java:56) 03-26 22:59:31.784: ERROR/AndroidRuntime(185): at android.view.LayoutInflater.createViewFromTag(LayoutInflater.java:563) 03-26 22:59:31.784: ERROR/AndroidRuntime(185): at android.view.LayoutInflater.rInflate(LayoutInflater.java:618) 03-26 22:59:31.784: ERROR/AndroidRuntime(185): at android.view.LayoutInflater.inflate(LayoutInflater.java:407) 03-26 22:59:31.784: ERROR/AndroidRuntime(185): at android.view.LayoutInflater.inflate(LayoutInflater.java:320) 03-26 22:59:31.784: ERROR/AndroidRuntime(185): at android.view.LayoutInflater.inflate(LayoutInflater.java:276) 03-26 22:59:31.784: ERROR/AndroidRuntime(185): at com.android.internal.policy.impl.PhoneWindow.setContentView(PhoneWindow.java:198) 03-26 22:59:31.784: ERROR/AndroidRuntime(185): at android.app.Activity.setContentView(Activity.java:1622) 03-26 22:59:31.784: ERROR/AndroidRuntime(185): at kz.androidmarket.www.randomtest1.randomTest1.onCreate(randomTest1.java:11) 03-26 22:59:31.784: ERROR/AndroidRuntime(185): at android.app.Instrumentation.callActivityOnCreate(Instrumentation.java:1047) 03-26 22:59:31.784: ERROR/AndroidRuntime(185): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2459) 03-26 22:59:31.784: ERROR/AndroidRuntime(185): ... 11 more 03-26 22:59:31.784: ERROR/AndroidRuntime(185): Caused by: java.lang.reflect.InvocationTargetException 03-26 22:59:31.784: ERROR/AndroidRuntime(185): at android.widget.TextView.(TextView.java:320) 03-26 22:59:31.784: ERROR/AndroidRuntime(185): at java.lang.reflect.Constructor.constructNative(Native Method) 03-26 22:59:31.784: ERROR/AndroidRuntime(185): at java.lang.reflect.Constructor.newInstance(Constructor.java:446) 03-26 22:59:31.784: ERROR/AndroidRuntime(185): at android.view.LayoutInflater.createView(LayoutInflater.java:500) 03-26 22:59:31.784: ERROR/AndroidRuntime(185): ... 22 more 03-26 22:59:31.784: ERROR/AndroidRuntime(185): Caused by: android.content.res.Resources$NotFoundException: File #ffff9900 from drawable resource ID #0x7f040002: .xml extension required 03-26 22:59:31.784: ERROR/AndroidRuntime(185): at android.content.res.Resources.loadColorStateList(Resources.java:1820) 03-26 22:59:31.784: ERROR/AndroidRuntime(185): at android.content.res.TypedArray.getColorStateList(TypedArray.java:289) 03-26 22:59:31.784: ERROR/AndroidRuntime(185): at android.widget.TextView.(TextView.java:627) 03-26 22:59:31.784: ERROR/AndroidRuntime(185): ... 26 more Could anybody help me?

Read the article

Dataset.ReadXml() - Invalid character in the given encoding

- by NLV

Hello all I have saved a dataset in the sql database in an xml column using the following code. XmlDataDocument dd = new XmlDataDocument(dataset); and passing this xml document as sql parameter using param.value = new XmlNodeReader(dd); The XML is like <NewDataSet><SubContractChangeOrders><AGCol>1</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>006</Contract_x0020_Number><ContractID>30</ContractID><ChangeOrderID>211</ChangeOrderID><Amount>0.0000</Amount><Udf_CostReimbursableFlag>false</Udf_CostReimbursableFlag><Udf_CustomerCode /><Udf_SubChangeOrderStatus /></SubContractChangeOrders><SubContractChangeOrders><AGCol>2</AGCol><SCO_x0020_Number>002</SCO_x0020_Number><Contract_x0020_Number>006</Contract_x0020_Number><ContractID>30</ContractID><ChangeOrderID>212</ChangeOrderID><Amount>0.0000</Amount><Udf_CostReimbursableFlag>false</Udf_CostReimbursableFlag></SubContractChangeOrders><SubContractChangeOrders><AGCol>3</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>111</Contract_x0020_Number><ContractID>87</ContractID><ChangeOrderID>12</ChangeOrderID><Amount>300.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>4</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>222</Contract_x0020_Number><ContractID>80</ContractID><ChangeOrderID>6</ChangeOrderID><Amount>100.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>5</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>777</Contract_x0020_Number><ContractID>79</ContractID><ChangeOrderID>5</ChangeOrderID><Amount>200.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>6</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>786</Contract_x0020_Number><ContractID>77</ContractID><ChangeOrderID>3</ChangeOrderID><Amount>100.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>7</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>787</Contract_x0020_Number><ContractID>78</ContractID><ChangeOrderID>4</ChangeOrderID><Amount>500.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>8</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>Con 009</Contract_x0020_Number><ContractID>219</ContractID><ChangeOrderID>78</ChangeOrderID><Amount>9000.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>9</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>Con 010</Contract_x0020_Number><ContractID>220</ContractID><ChangeOrderID>79</ChangeOrderID><Amount>13000.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>10</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>Con 012</Contract_x0020_Number><ContractID>222</ContractID><ChangeOrderID>83</ChangeOrderID><Amount>2300.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>11</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>Con 020</Contract_x0020_Number><ContractID>226</ContractID><ChangeOrderID>86</ChangeOrderID><Amount>5400.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>12</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>Con 021</Contract_x0020_Number><ContractID>227</ContractID><ChangeOrderID>87</ChangeOrderID><Amount>2300.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>13</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>Con001</Contract_x0020_Number><ContractID>208</ContractID><ChangeOrderID>72</ChangeOrderID><Amount>3000.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>14</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>Con002</Contract_x0020_Number><ContractID>209</ContractID><ChangeOrderID>73</ChangeOrderID><Amount>400.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>15</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>Con003</Contract_x0020_Number><ContractID>210</ContractID><ChangeOrderID>74</ChangeOrderID><Amount>6000.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>16</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>Con004</Contract_x0020_Number><ContractID>211</ContractID><ChangeOrderID>75</ChangeOrderID><Amount>9000.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>17</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>Con005</Contract_x0020_Number><ContractID>213</ContractID><ChangeOrderID>76</ChangeOrderID><Amount>17000.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>18</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>Cont001</Contract_x0020_Number><ContractID>228</ContractID><ChangeOrderID>89</ChangeOrderID><Amount>2000.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>19</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>PUR001</Contract_x0020_Number><ContractID>229</ContractID><ChangeOrderID>88</ChangeOrderID><Amount>1000.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>20</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>PUR002</Contract_x0020_Number><ContractID>230</ContractID><ChangeOrderID>90</ChangeOrderID><Amount>3000.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>21</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>SC-002</Contract_x0020_Number><ContractID>2</ContractID><ChangeOrderID>7</ChangeOrderID><Amount>200.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>22</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>SC-004</Contract_x0020_Number><ContractID>7</ContractID><ChangeOrderID>65</ChangeOrderID><Amount>1000.0000</Amount></SubContractChangeOrders></NewDataSet> I'm trying to read it back as follows using (SqlConnection con = new SqlConnection("Server=#####;Initial Catalog=#####;User ID=####;Pwd=########")) { using (SqlCommand com = new SqlCommand("select * from dbo.tbl_#####", con)) { using (SqlDataAdapter ada = new SqlDataAdapter(com)) { ada.Fill(dt); MemoryStream ms = new MemoryStream(); object contractXML1 = dt.Rows[0]["SCOXML1"]; System.Runtime.Serialization.Formatters.Binary.BinaryFormatter bf = new System.Runtime.Serialization.Formatters.Binary.BinaryFormatter(); bf.Serialize(ms, contractXML1); ms.Seek(0, SeekOrigin.Begin); ds.ReadXml(ms); } } } I'm getting the following error Data at the root level is invalid. Line 1, position 6. Any ideas? NLV

Read the article

Authoritative sources about Database vs. Flatfile decision

- by FastAl

<tldr>looking for a reference to a book or other undeniably authoritative source that gives reasons when you should choose a database vs. when you should choose other storage methods. I have provided an un-authoritative list of reasons about 2/3 of the way down this post.</tldr> I have a situation at my company where a database is being used where it would be better to use another solution (in this case, an auto-generated piece of source code that contains a static lookup table, searched by binary sort). Normally, a database would be an OK solution even though the problem does not require a database, e.g, none of the elements of ACID are needed, as it is read-only data, updated about every 3-5 years (also requiring other sourcecode changes), and fits in memory, and can be keyed into via binary search (a tad faster than db, but speed is not an issue). The problem is that this code runs on our enterprise server, but is shared with several PC platforms (some disconnected, some use a central DB, etc.), and parts of it are managed by multiple programming units, parts by the DBAs, parts even by mathematicians in another department, etc. These hit their own platform’s version of their databases (containing their own copy of the static data). What happens is that every implementation, every little change, something different goes wrong. There are many other issues as well. I can’t even use a flatfile, because one mode of running on our enterprise server does not have permission to read files (only databases, and of course, its own literal storage, e.g., in-source table). Of course, other parts of the system use databases in proper, less obscure manners; there is no problem with those parts. So why don’t we just change it? I don’t have administrative ability to force a change. But I’m affected because sometimes I have to help fix the problems, but mostly because it causes outages and tons of extra IT time by other programmers and d*mmit that makes me mad! The reason neither management, nor the designers of the system, can see the problem is that they propose a solution that won’t work: increase communication; implement more safeguards and standards; etc. But every time, in a different part of the already-pared-down but still multi-step processes, a few different diligent, hard-working, top performing IT personnel make a unique subtle error that causes it to fail, sometimes after the last round of testing! And in general these are not single-person failures, but understandable miscommunications. And communication at our company is actually better than most. People just don't think that's the case because they haven't dug into the matter. However, I have it on very good word from somebody with extensive formal study of sociology and psychology that the relatively small amount of less-than-proper database usage in this gigantic cross-platform multi-source, multi-language project is bureaucratically un-maintainable. Impossible. No chance. At least with Human Beings in the loop, and it can’t be automated. In addition, the management and developers who could change this, though intelligent and capable, don’t understand the rigidity of this ‘how humans are’ issue, and are not convincible on the matter. The reason putting the static data in sourcecode will solve the problem is, although the solution is less sexy than a database, it would function with no technical drawbacks; and since the sharing of sourcecode already works very well, you basically erase any database-related effort from this section of the project, along with all the drawbacks of it that are causing problems. OK, that’s the background, for the curious. I won’t be able to convince management that this is an unfixable sociological problem, and that the real solution is coding around these limits of human nature, just as you would code around a bug in a 3rd party component that you can’t change. So what I have to do is exploit the unsuitableness of the database solution, and not do it using logic, but rather authority. I am aware of many reasons, and posts on this site giving reasons for one over the other; I’m not looking for lists of reasons like these (although you can add a comment if I've miss a doozy): WHY USE A DATABASE? instead of flatfile/other DB vs. file: if you need... Random Read / Transparent search optimization Advanced / varied / customizable Searching and sorting capabilities Transaction/rollback Locks, semaphores Concurrency control / Shared users Security 1-many/m-m is easier Easy modification Scalability Load Balancing Random updates / inserts / deletes Advanced query Administrative control of design, etc. SQL / learning curve Debugging / Logging Centralized / Live Backup capabilities Cached queries / dvlp & cache execution plans Interleaved update/read Referential integrity, avoid redundant/missing/corrupt/out-of-sync data Reporting (from on olap or oltp db) / turnkey generation tools [Disadvantages:] Important to get right the first time - professional design - but only b/c it's meant to last s/w & h/w cost Usu. over a network, speed issue (best vs. best design vs. local=even then a separate process req's marshalling/netwk layers/inter-p comm) indicies and query processing can stand in the way of simple processing (vs. flatfile) WHY USE FLATFILE: If you only need... Sequential Row processing only Limited usage append only (no reading, no master key/update) Only Update the record you're reading (fixed length recs only) Too big to fit into memory If Local disk / read-ahead network connection Portability / small system Email / cut & Paste / store as document by novice - simple format Low design learning curve but high cost later WHY USE IN-MEMORY/TABLE (tables, arrays, etc.): if you need... Processing a single db/ff record that was imported Known size of data Static data if hardcoding the table Narrow, unchanging use (e.g., one program or proc) -includes a class that will be shared, but encapsulates its data manipulation Extreme speed needed / high transaction frequency Random access - but search is dependent on implementation Following are some other posts about the topic: http://stackoverflow.com/questions/1499239/database-vs-flat-text-file-what-are-some-technical-reasons-for-choosing-one-over http://stackoverflow.com/questions/332825/are-flat-file-databases-any-good http://stackoverflow.com/questions/2356851/database-vs-flat-files http://stackoverflow.com/questions/514455/databases-vs-plain-text/514530 What I’d like to know is if anybody could recommend a hard, authoritative source containing these reasons. I’m looking for a paper book I can buy, or a reputable website with whitepapers about the issue (e.g., Microsoft, IBM), not counting the user-generated content on those sites. This will have a greater change to elicit a change that I’m looking for: less wasted programmer time, and more reliable programs. Thanks very much for your help. You win a prize for reading such a large post!

Read the article

How do I prove I should put a table of values in source code instead of a database table?

- by FastAl

<tldr>looking for a reference to a book or other undeniably authoritative source that gives reasons when you should choose a database vs. when you should choose other storage methods. I have provided an un-authoritative list of reasons about 2/3 of the way down this post.</tldr> I have a situation at my company where a database is being used where it would be better to use another solution (in this case, an auto-generated piece of source code that contains a static lookup table, searched by binary sort). Normally, a database would be an OK solution even though the problem does not require a database, e.g, none of the elements of ACID are needed, as it is read-only data, updated about every 3-5 years (also requiring other sourcecode changes), and fits in memory, and can be keyed into via binary search (a tad faster than db, but speed is not an issue). The problem is that this code runs on our enterprise server, but is shared with several PC platforms (some disconnected, some use a central DB, etc.), and parts of it are managed by multiple programming units, parts by the DBAs, parts even by mathematicians in another department, etc. These hit their own platform’s version of their databases (containing their own copy of the static data). What happens is that every implementation, every little change, something different goes wrong. There are many other issues as well. I can’t even use a flatfile, because one mode of running on our enterprise server does not have permission to read files (only databases, and of course, its own literal storage, e.g., in-source table). Of course, other parts of the system use databases in proper, less obscure manners; there is no problem with those parts. So why don’t we just change it? I don’t have administrative ability to force a change. But I’m affected because sometimes I have to help fix the problems, but mostly because it causes outages and tons of extra IT time by other programmers and d*mmit that makes me mad! The reason neither management, nor the designers of the system, can see the problem is that they propose a solution that won’t work: increase communication; implement more safeguards and standards; etc. But every time, in a different part of the already-pared-down but still multi-step processes, a few different diligent, hard-working, top performing IT personnel make a unique subtle error that causes it to fail, sometimes after the last round of testing! And in general these are not single-person failures, but understandable miscommunications. And communication at our company is actually better than most. People just don't think that's the case because they haven't dug into the matter. However, I have it on very good word from somebody with extensive formal study of sociology and psychology that the relatively small amount of less-than-proper database usage in this gigantic cross-platform multi-source, multi-language project is bureaucratically un-maintainable. Impossible. No chance. At least with Human Beings in the loop, and it can’t be automated. In addition, the management and developers who could change this, though intelligent and capable, don’t understand the rigidity of this ‘how humans are’ issue, and are not convincible on the matter. The reason putting the static data in sourcecode will solve the problem is, although the solution is less sexy than a database, it would function with no technical drawbacks; and since the sharing of sourcecode already works very well, you basically erase any database-related effort from this section of the project, along with all the drawbacks of it that are causing problems. OK, that’s the background, for the curious. I won’t be able to convince management that this is an unfixable sociological problem, and that the real solution is coding around these limits of human nature, just as you would code around a bug in a 3rd party component that you can’t change. So what I have to do is exploit the unsuitableness of the database solution, and not do it using logic, but rather authority. I am aware of many reasons, and posts on this site giving reasons for one over the other; I’m not looking for lists of reasons like these (although you can add a comment if I've miss a doozy): WHY USE A DATABASE? instead of flatfile/other DB vs. file: if you need... Random Read / Transparent search optimization Advanced / varied / customizable Searching and sorting capabilities Transaction/rollback Locks, semaphores Concurrency control / Shared users Security 1-many/m-m is easier Easy modification Scalability Load Balancing Random updates / inserts / deletes Advanced query Administrative control of design, etc. SQL / learning curve Debugging / Logging Centralized / Live Backup capabilities Cached queries / dvlp & cache execution plans Interleaved update/read Referential integrity, avoid redundant/missing/corrupt/out-of-sync data Reporting (from on olap or oltp db) / turnkey generation tools [Disadvantages:] Important to get right the first time - professional design - but only b/c it's meant to last s/w & h/w cost Usu. over a network, speed issue (best vs. best design vs. local=even then a separate process req's marshalling/netwk layers/inter-p comm) indicies and query processing can stand in the way of simple processing (vs. flatfile) WHY USE FLATFILE: If you only need... Sequential Row processing only Limited usage append only (no reading, no master key/update) Only Update the record you're reading (fixed length recs only) Too big to fit into memory If Local disk / read-ahead network connection Portability / small system Email / cut & Paste / store as document by novice - simple format Low design learning curve but high cost later WHY USE IN-MEMORY/TABLE (tables, arrays, etc.): if you need... Processing a single db/ff record that was imported Known size of data Static data if hardcoding the table Narrow, unchanging use (e.g., one program or proc) -includes a class that will be shared, but encapsulates its data manipulation Extreme speed needed / high transaction frequency Random access - but search is dependent on implementation Following are some other posts about the topic: http://stackoverflow.com/questions/1499239/database-vs-flat-text-file-what-are-some-technical-reasons-for-choosing-one-over http://stackoverflow.com/questions/332825/are-flat-file-databases-any-good http://stackoverflow.com/questions/2356851/database-vs-flat-files http://stackoverflow.com/questions/514455/databases-vs-plain-text/514530 What I’d like to know is if anybody could recommend a hard, authoritative source containing these reasons. I’m looking for a paper book I can buy, or a reputable website with whitepapers about the issue (e.g., Microsoft, IBM), not counting the user-generated content on those sites. This will have a greater change to elicit a change that I’m looking for: less wasted programmer time, and more reliable programs. Thanks very much for your help. You win a prize for reading such a large post!

Read the article

File using .net sockets, transferring problem

- by Sergei

I have a client and server, client sending file to server. When i transfer files on my computer(in local) everything is ok(try to sen file over 700mb). When i try to sent file use Internet to my friend in the end of sending appears error on server "Input string is not in correct format".This error appears in this expression fSize = Convert::ToUInt64(tokenes[0]); - and i don't mind wht it's appear. File should be transfered and wait other transferring ps: sorry for too much code, but i want to find solution private: void CreateServer() { try{ IPAddress ^ipAddres = IPAddress::Parse(ipAdress); listener = gcnew System::Net::Sockets::TcpListener(ipAddres, port); listener->Start(); clientsocket =listener->AcceptSocket(); bool keepalive = true; array<wchar_t,1> ^split = gcnew array<wchar_t>(1){ '\0' }; array<wchar_t,1> ^split2 = gcnew array<wchar_t>(1){ '|' }; statusBar1->Text = "Connected" ; // while (keepalive) { array<Byte>^ size1 = gcnew array<Byte>(1024); clientsocket->Receive(size1); System::String ^notSplited = System::Text::Encoding::GetEncoding(1251)->GetString(size1); array<String^> ^ tokenes = notSplited->Split(split2); System::String ^fileName = tokenes[1]->ToString(); statusBar1->Text = "Receiving file" ; unsigned long fSize = 0; //IN THIS EXPRESSIN APPEARS ERROR fSize = Convert::ToUInt64(tokenes[0]); if (!Directory::Exists("Received")) Directory::CreateDirectory("Received"); System::String ^path = "Received\\"+ fileName; while (File::Exists(path)) { int dotPos = path->LastIndexOf('.'); if (dotPos == -1) { path += "[1]"; } else { path = path->Insert(dotPos, "[1]"); } } FileStream ^fs = gcnew FileStream(path, FileMode::CreateNew, FileAccess::Write); BinaryWriter ^f = gcnew BinaryWriter(fs); //bytes received unsigned long processed = 0; pBarFilesTr->Visible = true; pBarFilesTr->Minimum = 0; pBarFilesTr->Maximum = (int)fSize; // Set the initial value of the ProgressBar. pBarFilesTr->Value = 0; pBarFilesTr->Step = 1024; //loop for receive file array<Byte>^ buffer = gcnew array<Byte>(1024); while (processed < fSize) { if ((fSize - processed) < 1024) { int bytes ; array<Byte>^ buf = gcnew array<Byte>(1024); bytes = clientsocket->Receive(buf); if (bytes != 0) { f->Write(buf, 0, bytes); processed = processed + (unsigned long)bytes; pBarFilesTr->PerformStep(); } break; } else { int bytes = clientsocket->Receive(buffer); if (bytes != 0) { f->Write(buffer, 0, 1024); processed = processed + 1024; pBarFilesTr->PerformStep(); } else break; } } statusBar1->Text = "File was received" ; array<Byte>^ buf = gcnew array<Byte>(1); clientsocket->Send(buf,buf->Length,SocketFlags::None); f->Close(); fs->Close(); SystemSounds::Beep->Play(); } }catch(System::Net::Sockets::SocketException ^es) { MessageBox::Show(es->ToString()); } catch(System::Exception ^es) { MessageBox::Show(es->ToString()); } } private: void CreateClient() { clientsock = gcnew System::Net::Sockets::TcpClient(ipAdress, port); ns = clientsock->GetStream(); sr = gcnew StreamReader(ns); statusBar1->Text = "Connected" ; } private:void Send() { try{ OpenFileDialog ^openFileDialog1 = gcnew OpenFileDialog(); System::String ^filePath = ""; System::String ^fileName = ""; //file choose dialog if (openFileDialog1->ShowDialog() == System::Windows::Forms::DialogResult::OK) { filePath = openFileDialog1->FileName; fileName = openFileDialog1->SafeFileName; } else { MessageBox::Show("You must select a file", "Error", MessageBoxButtons::OK, MessageBoxIcon::Exclamation); return; } statusBar1->Text = "Sending file" ; NetworkStream ^writerStream = clientsock->GetStream(); System::Runtime::Serialization::Formatters::Binary::BinaryFormatter ^format = gcnew System::Runtime::Serialization::Formatters::Binary::BinaryFormatter(); array<Byte>^ buffer = gcnew array<Byte>(1024); FileStream ^fs = gcnew FileStream(filePath, FileMode::Open); BinaryReader ^br = gcnew BinaryReader(fs); //file size unsigned long fSize = (unsigned long)fs->Length; //transfer file size + name bFSize = Encoding::GetEncoding(1251)->GetBytes(Convert::ToString(fs->Length+"|"+fileName+"|")); writerStream->Write(bFSize, 0, bFSize->Length); //status bar pBarFilesTr->Visible = true; pBarFilesTr->Minimum = 0; pBarFilesTr->Maximum = (int)fSize; pBarFilesTr->Value = 0; // Set the initial value of the ProgressBar. pBarFilesTr->Step = 1024; //bytes transfered unsigned long processed = 0; int bytes = 1024; //loop for transfer while (processed < fSize) { if ((fSize - processed) < 1024) { bytes = (int)(fSize - processed); array<Byte>^ buf = gcnew array<Byte>(bytes); br->Read(buf, 0, bytes); writerStream->Write(buf, 0, buf->Length); pBarFilesTr->PerformStep(); processed = processed + (unsigned long)bytes; break; } else { br->Read(buffer, 0, 1024); writerStream->Write(buffer, 0, buffer->Length); pBarFilesTr->PerformStep(); processed = processed + 1024; } } array<Byte>^ bufsss = gcnew array<Byte>(100); writerStream->Read(bufsss,0,bufsss->Length); statusBar1->Text = "File was sent" ; btnSend->Enabled = true; fs->Close(); br->Close(); SystemSounds::Beep->Play(); newThread->Abort(); } catch(System::Net::Sockets::SocketException ^es) { MessageBox::Show(es->ToString()); } } UPDATE: ok, i can add checking if clientsocket->Receive(size1); equal zero, but why he begin receiving data again , in the ending of receiving. UPDATE:After adding this checking problem remains. AND WIN RAR SAY TO OPENING ARCHIVE - unexpected end of file! UPDATE:http://img153.imageshack.us/img153/3760/erorr.gif I think it continue receiving some bytes from client(that remains in the stream), but why existes cicle while (processed < fSize)

Read the article

Python - pickling fails for numpy.void objects

- by I82Much

>>> idmapfile = open("idmap", mode="w") >>> pickle.dump(idMap, idmapfile) >>> idmapfile.close() >>> idmapfile = open("idmap") >>> unpickled = pickle.load(idmapfile) >>> unpickled == idMap False idMap[1] {1537: (552, 1, 1537, 17.793827056884766, 3), 1540: (4220, 1, 1540, 19.31205940246582, 3), 1544: (592, 1, 1544, 18.129131317138672, 3), 1675: (529, 1, 1675, 18.347782135009766, 3), 1550: (4048, 1, 1550, 19.31205940246582, 3), 1424: (1528, 1, 1424, 19.744396209716797, 3), 1681: (1265, 1, 1681, 19.596025466918945, 3), 1560: (3457, 1, 1560, 20.530569076538086, 3), 1690: (477, 1, 1690, 17.395542144775391, 3), 1691: (554, 1, 1691, 13.446117401123047, 3), 1436: (3010, 1, 1436, 19.596025466918945, 3), 1434: (3183, 1, 1434, 19.744396209716797, 3), 1441: (3570, 1, 1441, 20.589576721191406, 3), 1435: (476, 1, 1435, 19.640911102294922, 3), 1444: (527, 1, 1444, 17.98480224609375, 3), 1478: (1897, 1, 1478, 19.596025466918945, 3), 1575: (614, 1, 1575, 19.371648788452148, 3), 1586: (2189, 1, 1586, 19.31205940246582, 3), 1716: (3470, 1, 1716, 19.158674240112305, 3), 1590: (2278, 1, 1590, 19.596025466918945, 3), 1463: (991, 1, 1463, 19.31205940246582, 3), 1594: (1890, 1, 1594, 19.596025466918945, 3), 1467: (1087, 1, 1467, 19.31205940246582, 3), 1596: (3759, 1, 1596, 19.744396209716797, 3), 1602: (3011, 1, 1602, 20.530569076538086, 3), 1547: (490, 1, 1547, 17.994071960449219, 3), 1605: (658, 1, 1605, 19.31205940246582, 3), 1606: (1794, 1, 1606, 16.964881896972656, 3), 1719: (1826, 1, 1719, 19.596025466918945, 3), 1617: (583, 1, 1617, 11.894925117492676, 3), 1492: (3441, 1, 1492, 20.500667572021484, 3), 1622: (3215, 1, 1622, 19.31205940246582, 3), 1628: (2761, 1, 1628, 19.744396209716797, 3), 1502: (1563, 1, 1502, 19.596025466918945, 3), 1632: (1108, 1, 1632, 15.457141876220703, 3), 1468: (3779, 1, 1468, 19.596025466918945, 3), 1642: (3970, 1, 1642, 19.744396209716797, 3), 1518: (612, 1, 1518, 18.570245742797852, 3), 1647: (854, 1, 1647, 16.964881896972656, 3), 1650: (2099, 1, 1650, 20.439058303833008, 3), 1651: (540, 1, 1651, 18.552841186523438, 3), 1653: (613, 1, 1653, 19.237197875976563, 3), 1532: (537, 1, 1532, 18.885730743408203, 3)} >>> unpickled[1] {1537: (64880, 1638, 56700, -1.0808743559293829e+18, 152), 1540: (64904, 1638, 0, 0.0, 0), 1544: (54472, 1490, 0, 0.0, 0), 1675: (6464, 1509, 0, 0.0, 0), 1550: (43592, 1510, 0, 0.0, 0), 1424: (43616, 1510, 0, 0.0, 0), 1681: (0, 0, 0, 0.0, 0), 1560: (400, 152, 400, 2.1299736657737219e-43, 0), 1690: (408, 152, 408, 2.7201111331839077e+26, 34), 1435: (424, 152, 61512, 1.0122952080313192e-39, 0), 1436: (400, 152, 400, 20.250289916992188, 3), 1434: (424, 152, 62080, 1.0122952080313192e-39, 0), 1441: (400, 152, 400, 12.250144958496094, 3), 1691: (424, 152, 42608, 15.813941955566406, 3), 1444: (400, 152, 400, 19.625289916992187, 3), 1606: (424, 152, 42432, 5.2947192852601414e-22, 41), 1575: (400, 152, 400, 6.2537390010262572e-36, 0), 1586: (424, 152, 42488, 1.0122601755697111e-39, 0), 1716: (400, 152, 400, 6.2537390010262572e-36, 0), 1590: (424, 152, 64144, 1.0126357235581501e-39, 0), 1463: (400, 152, 400, 6.2537390010262572e-36, 0), 1594: (424, 152, 32672, 17.002994537353516, 3), 1467: (400, 152, 400, 19.750289916992187, 3), 1596: (424, 152, 7176, 1.0124003054161436e-39, 0), 1602: (400, 152, 400, 18.500289916992188, 3), 1547: (424, 152, 7000, 1.0124003054161436e-39, 0), 1605: (400, 152, 400, 20.500289916992188, 3), 1478: (424, 152, 42256, -6.0222748507426518e+30, 222), 1719: (400, 152, 400, 6.2537390010262572e-36, 0), 1617: (424, 152, 16472, 1.0124283313854301e-39, 0), 1492: (400, 152, 400, 6.2537390010262572e-36, 0), 1622: (424, 152, 35304, 1.0123190301052127e-39, 0), 1628: (400, 152, 400, 6.2537390010262572e-36, 0), 1502: (424, 152, 63152, 19.627988815307617, 3), 1632: (400, 152, 400, 19.375289916992188, 3), 1468: (424, 152, 38088, 1.0124213248931084e-39, 0), 1642: (400, 152, 400, 6.2537390010262572e-36, 0), 1518: (424, 152, 63896, 1.0127436235399031e-39, 0), 1647: (400, 152, 400, 6.2537390010262572e-36, 0), 1650: (424, 152, 53424, 16.752857208251953, 3), 1651: (400, 152, 400, 19.250289916992188, 3), 1653: (424, 152, 50624, 1.0126497365427934e-39, 0), 1532: (400, 152, 400, 6.2537390010262572e-36, 0)} The keys come out fine, the values are screwed up. I tried same thing loading file in binary mode; didn't fix the problem. Any idea what I'm doing wrong? Edit: Here's the code with binary. Note that the values are different in the unpickled object. >>> idmapfile = open("idmap", mode="wb") >>> pickle.dump(idMap, idmapfile) >>> idmapfile.close() >>> idmapfile = open("idmap", mode="rb") >>> unpickled = pickle.load(idmapfile) >>> unpickled==idMap False >>> unpickled[1] {1537: (12176, 2281, 56700, -1.0808743559293829e+18, 152), 1540: (0, 0, 15934, 2.7457842047810522e+26, 108), 1544: (400, 152, 400, 4.9518498821046956e+27, 53), 1675: (408, 152, 408, 2.7201111331839077e+26, 34), 1550: (456, 152, 456, -1.1349175514578289e+18, 152), 1424: (432, 152, 432, 4.5939047815653343e-40, 11), 1681: (408, 152, 408, 2.1299736657737219e-43, 0), 1560: (376, 152, 376, 2.1299736657737219e-43, 0), 1690: (376, 152, 376, 2.1299736657737219e-43, 0), 1435: (376, 152, 376, 2.1299736657737219e-43, 0), 1436: (376, 152, 376, 2.1299736657737219e-43, 0), 1434: (376, 152, 376, 2.1299736657737219e-43, 0), 1441: (376, 152, 376, 2.1299736657737219e-43, 0), 1691: (376, 152, 376, 2.1299736657737219e-43, 0), 1444: (376, 152, 376, 2.1299736657737219e-43, 0), 1606: (25784, 2281, 376, -3.2883343074537754e+26, 34), 1575: (24240, 2281, 376, 2.1299736657737219e-43, 0), 1586: (24240, 2281, 376, 2.1299736657737219e-43, 0), 1716: (24240, 2281, 376, -3.0093091599657311e-35, 26), 1590: (24240, 2281, 376, 2.1299736657737219e-43, 0), 1463: (24240, 2281, 376, 2.1299736657737219e-43, 0), 1594: (24240, 2281, 376, -4123208450048.0, 196), 1467: (25784, 2281, 376, 2.1299736657737219e-43, 0), 1596: (25784, 2281, 376, 2.1299736657737219e-43, 0), 1602: (25784, 2281, 376, -5.9963281433905448e+26, 76), 1547: (25784, 2281, 376, -218106240.0, 139), 1605: (25784, 2281, 376, -3.7138649803377281e+27, 56), 1478: (376, 152, 376, 2.1299736657737219e-43, 0), 1719: (25784, 2281, 376, 2.1299736657737219e-43, 0), 1617: (25784, 2281, 376, -1.4411779941597184e+17, 237), 1492: (25784, 2281, 376, 2.8596493694487798e-30, 80), 1622: (25784, 2281, 376, 184686084096.0, 93), 1628: (1336, 152, 1336, 3.1691839245470052e+29, 179), 1502: (1272, 152, 1272, -5.2042207205116645e-17, 99), 1632: (1208, 152, 1208, 2.1299736657737219e-43, 0), 1468: (1144, 152, 1144, 2.1299736657737219e-43, 0), 1642: (1080, 152, 1080, 2.1299736657737219e-43, 0), 1518: (1016, 152, 1016, 4.0240902787680023e+35, 145), 1647: (952, 152, 952, -985172619034624.0, 237), 1650: (888, 152, 888, 12094787289088.0, 66), 1651: (824, 152, 824, 2.1299736657737219e-43, 0), 1653: (760, 152, 760, 0.00018310768064111471, 238), 1532: (696, 152, 696, 8.8978061885676389e+26, 125)} OK I've isolated the problem, but don't know why it's so. First, apparently what I'm pickling are not tuples (though they look like it), but instead numpy.void types. Here is a series to illustrate the problem. first = run0.detections[0] >>> first (1, 19, 1578, 82.637763977050781, 1) >>> type(first) <type 'numpy.void'> >>> firstTuple = tuple(first) >>> theFile = open("pickleTest", "w") >>> pickle.dump(first, theFile) >>> theTupleFile = open("pickleTupleTest", "w") >>> pickle.dump(firstTuple, theTupleFile) >>> theFile.close() >>> theTupleFile.close() >>> first (1, 19, 1578, 82.637763977050781, 1) >>> firstTuple (1, 19, 1578, 82.637764, 1) >>> theFile = open("pickleTest", "r") >>> theTupleFile = open("pickleTupleTest", "r") >>> unpickledTuple = pickle.load(theTupleFile) >>> unpickledVoid = pickle.load(theFile) >>> type(unpickledVoid) <type 'numpy.void'> >>> type(unpickledTuple) <type 'tuple'> >>> unpickledTuple (1, 19, 1578, 82.637764, 1) >>> unpickledTuple == firstTuple True >>> unpickledVoid == first False >>> unpickledVoid (7936, 1705, 56700, -1.0808743559293829e+18, 152) >>> first (1, 19, 1578, 82.637763977050781, 1)

Read the article

File using sockets .net, tranfering problem

- by Sergei

I have a client and server, client sending file to server. When i transfer files on my computer(in local) everything is ok(try to sen file over 700mb). When i try to sent file use Internet to my friend in the end of sending appears error on server "Input string is not in correct format".This error appears in this expression fSize = Convert::ToUInt64(tokenes[0]); - and i don't mind wht it's appear. File should be transfered and wait other transferring ps: sorry for too much code, but i want to find solution private: void CreateServer() { try{ IPAddress ^ipAddres = IPAddress::Parse(ipAdress); listener = gcnew System::Net::Sockets::TcpListener(ipAddres, port); listener->Start(); clientsocket =listener->AcceptSocket(); bool keepalive = true; array<wchar_t,1> ^split = gcnew array<wchar_t>(1){ '\0' }; array<wchar_t,1> ^split2 = gcnew array<wchar_t>(1){ '|' }; statusBar1->Text = "Connected" ; // while (keepalive) { array<Byte>^ size1 = gcnew array<Byte>(1024); clientsocket->Receive(size1); System::String ^notSplited = System::Text::Encoding::GetEncoding(1251)->GetString(size1); array<String^> ^ tokenes = notSplited->Split(split2); System::String ^fileName = tokenes[1]->ToString(); statusBar1->Text = "Receiving file" ; unsigned long fSize = 0; //IN THIS EXPRESSIN APPEARS ERROR fSize = Convert::ToUInt64(tokenes[0]); if (!Directory::Exists("Received")) Directory::CreateDirectory("Received"); System::String ^path = "Received\\"+ fileName; while (File::Exists(path)) { int dotPos = path->LastIndexOf('.'); if (dotPos == -1) { path += "[1]"; } else { path = path->Insert(dotPos, "[1]"); } } FileStream ^fs = gcnew FileStream(path, FileMode::CreateNew, FileAccess::Write); BinaryWriter ^f = gcnew BinaryWriter(fs); //bytes received unsigned long processed = 0; pBarFilesTr->Visible = true; pBarFilesTr->Minimum = 0; pBarFilesTr->Maximum = (int)fSize; // Set the initial value of the ProgressBar. pBarFilesTr->Value = 0; pBarFilesTr->Step = 1024; //loop for receive file array<Byte>^ buffer = gcnew array<Byte>(1024); while (processed < fSize) { if ((fSize - processed) < 1024) { int bytes ; array<Byte>^ buf = gcnew array<Byte>(1024); bytes = clientsocket->Receive(buf); if (bytes != 0) { f->Write(buf, 0, bytes); processed = processed + (unsigned long)bytes; pBarFilesTr->PerformStep(); } break; } else { int bytes = clientsocket->Receive(buffer); if (bytes != 0) { f->Write(buffer, 0, 1024); processed = processed + 1024; pBarFilesTr->PerformStep(); } else break; } } statusBar1->Text = "File was received" ; array<Byte>^ buf = gcnew array<Byte>(1); clientsocket->Send(buf,buf->Length,SocketFlags::None); f->Close(); fs->Close(); SystemSounds::Beep->Play(); } }catch(System::Net::Sockets::SocketException ^es) { MessageBox::Show(es->ToString()); } catch(System::Exception ^es) { MessageBox::Show(es->ToString()); } } private: void CreateClient() { clientsock = gcnew System::Net::Sockets::TcpClient(ipAdress, port); ns = clientsock->GetStream(); sr = gcnew StreamReader(ns); statusBar1->Text = "Connected" ; } private:void Send() { try{ OpenFileDialog ^openFileDialog1 = gcnew OpenFileDialog(); System::String ^filePath = ""; System::String ^fileName = ""; //file choose dialog if (openFileDialog1->ShowDialog() == System::Windows::Forms::DialogResult::OK) { filePath = openFileDialog1->FileName; fileName = openFileDialog1->SafeFileName; } else { MessageBox::Show("You must select a file", "Error", MessageBoxButtons::OK, MessageBoxIcon::Exclamation); return; } statusBar1->Text = "Sending file" ; NetworkStream ^writerStream = clientsock->GetStream(); System::Runtime::Serialization::Formatters::Binary::BinaryFormatter ^format = gcnew System::Runtime::Serialization::Formatters::Binary::BinaryFormatter(); array<Byte>^ buffer = gcnew array<Byte>(1024); FileStream ^fs = gcnew FileStream(filePath, FileMode::Open); BinaryReader ^br = gcnew BinaryReader(fs); //file size unsigned long fSize = (unsigned long)fs->Length; //transfer file size + name bFSize = Encoding::GetEncoding(1251)->GetBytes(Convert::ToString(fs->Length+"|"+fileName+"|")); writerStream->Write(bFSize, 0, bFSize->Length); //status bar pBarFilesTr->Visible = true; pBarFilesTr->Minimum = 0; pBarFilesTr->Maximum = (int)fSize; pBarFilesTr->Value = 0; // Set the initial value of the ProgressBar. pBarFilesTr->Step = 1024; //bytes transfered unsigned long processed = 0; int bytes = 1024; //loop for transfer while (processed < fSize) { if ((fSize - processed) < 1024) { bytes = (int)(fSize - processed); array<Byte>^ buf = gcnew array<Byte>(bytes); br->Read(buf, 0, bytes); writerStream->Write(buf, 0, buf->Length); pBarFilesTr->PerformStep(); processed = processed + (unsigned long)bytes; break; } else { br->Read(buffer, 0, 1024); writerStream->Write(buffer, 0, buffer->Length); pBarFilesTr->PerformStep(); processed = processed + 1024; } } array<Byte>^ bufsss = gcnew array<Byte>(100); writerStream->Read(bufsss,0,bufsss->Length); statusBar1->Text = "File was sent" ; btnSend->Enabled = true; fs->Close(); br->Close(); SystemSounds::Beep->Play(); newThread->Abort(); } catch(System::Net::Sockets::SocketException ^es) { MessageBox::Show(es->ToString()); } }

Read the article

Localhost not working after installing PHP on Mountain Lion

- by zen

I've installed php using brew install php54 --with-mysql, I've set up all the path correctly. which php will give me /usr/local/bin/php php -v will give me PHP 5.4.8 (cli) (built: Nov 20 2012 09:29:31) php --ini will give me: Configuration File (php.ini) Path: /usr/local/etc/php/5.4 Loaded Configuration File: /usr/local/etc/php/5.4/php.ini Scan for additional .ini files in: /usr/local/etc/php/5.4/conf.d Additional .ini files parsed: (none) apachectl -V | grep httpd.conf will give me -D SERVER_CONFIG_FILE="/private/etc/apache2/httpd.conf" I believe everything is correct, but after I restarted my apache I keep getting error Service Temporarily Unavailable The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later. This is my httpd.conf file: # # This is the main Apache HTTP server configuration file. It contains the # configuration directives that give the server its instructions. # See <URL:http://httpd.apache.org/docs/2.2> for detailed information. # In particular, see # <URL:http://httpd.apache.org/docs/2.2/mod/directives.html> # for a discussion of each configuration directive. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so "log/foo_log" # with ServerRoot set to "/usr" will be interpreted by the # server as "/usr/log/foo_log". # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # Do not add a slash at the end of the directory path. If you point # ServerRoot at a non-local disk, be sure to point the LockFile directive # at a local disk. If you wish to share the same ServerRoot for multiple # httpd daemons, you will need to change at least LockFile and PidFile. # ServerRoot "/usr" # # Listen: Allows you to bind Apache to specific IP addresses and/or # ports, instead of the default. See also the <VirtualHost> # directive. # # Change this to Listen on specific IP addresses as shown below to # prevent Apache from glomming onto all bound IP addresses. # #Listen 12.34.56.78:80 Listen 127.0.0.1:80 # # Dynamic Shared Object (DSO) Support # # To be able to use the functionality of a module which was built as a DSO you # have to place corresponding `LoadModule' lines at this location so the # directives contained in it are actually available _before_ they are used. # Statically compiled modules (those listed by `httpd -l') do not need # to be loaded here. # # Example: # LoadModule foo_module modules/mod_foo.so # LoadModule authn_file_module libexec/apache2/mod_authn_file.so LoadModule authn_dbm_module libexec/apache2/mod_authn_dbm.so LoadModule authn_anon_module libexec/apache2/mod_authn_anon.so LoadModule authn_dbd_module libexec/apache2/mod_authn_dbd.so LoadModule authn_default_module libexec/apache2/mod_authn_default.so LoadModule authz_host_module libexec/apache2/mod_authz_host.so LoadModule authz_groupfile_module libexec/apache2/mod_authz_groupfile.so LoadModule authz_user_module libexec/apache2/mod_authz_user.so LoadModule authz_dbm_module libexec/apache2/mod_authz_dbm.so LoadModule authz_owner_module libexec/apache2/mod_authz_owner.so LoadModule authz_default_module libexec/apache2/mod_authz_default.so LoadModule auth_basic_module libexec/apache2/mod_auth_basic.so LoadModule auth_digest_module libexec/apache2/mod_auth_digest.so LoadModule cache_module libexec/apache2/mod_cache.so LoadModule disk_cache_module libexec/apache2/mod_disk_cache.so LoadModule mem_cache_module libexec/apache2/mod_mem_cache.so LoadModule dbd_module libexec/apache2/mod_dbd.so LoadModule dumpio_module libexec/apache2/mod_dumpio.so LoadModule reqtimeout_module libexec/apache2/mod_reqtimeout.so LoadModule ext_filter_module libexec/apache2/mod_ext_filter.so LoadModule include_module libexec/apache2/mod_include.so LoadModule filter_module libexec/apache2/mod_filter.so LoadModule substitute_module libexec/apache2/mod_substitute.so LoadModule deflate_module libexec/apache2/mod_deflate.so LoadModule log_config_module libexec/apache2/mod_log_config.so LoadModule log_forensic_module libexec/apache2/mod_log_forensic.so LoadModule logio_module libexec/apache2/mod_logio.so LoadModule env_module libexec/apache2/mod_env.so LoadModule mime_magic_module libexec/apache2/mod_mime_magic.so LoadModule cern_meta_module libexec/apache2/mod_cern_meta.so LoadModule expires_module libexec/apache2/mod_expires.so LoadModule headers_module libexec/apache2/mod_headers.so LoadModule ident_module libexec/apache2/mod_ident.so LoadModule usertrack_module libexec/apache2/mod_usertrack.so #LoadModule unique_id_module libexec/apache2/mod_unique_id.so LoadModule setenvif_module libexec/apache2/mod_setenvif.so LoadModule version_module libexec/apache2/mod_version.so LoadModule proxy_module libexec/apache2/mod_proxy.so LoadModule proxy_connect_module libexec/apache2/mod_proxy_connect.so LoadModule proxy_ftp_module libexec/apache2/mod_proxy_ftp.so LoadModule proxy_http_module libexec/apache2/mod_proxy_http.so LoadModule proxy_scgi_module libexec/apache2/mod_proxy_scgi.so LoadModule proxy_ajp_module libexec/apache2/mod_proxy_ajp.so LoadModule proxy_balancer_module libexec/apache2/mod_proxy_balancer.so LoadModule ssl_module libexec/apache2/mod_ssl.so LoadModule mime_module libexec/apache2/mod_mime.so LoadModule dav_module libexec/apache2/mod_dav.so LoadModule status_module libexec/apache2/mod_status.so LoadModule autoindex_module libexec/apache2/mod_autoindex.so LoadModule asis_module libexec/apache2/mod_asis.so LoadModule info_module libexec/apache2/mod_info.so LoadModule cgi_module libexec/apache2/mod_cgi.so LoadModule dav_fs_module libexec/apache2/mod_dav_fs.so LoadModule vhost_alias_module libexec/apache2/mod_vhost_alias.so LoadModule negotiation_module libexec/apache2/mod_negotiation.so LoadModule dir_module libexec/apache2/mod_dir.so LoadModule imagemap_module libexec/apache2/mod_imagemap.so LoadModule actions_module libexec/apache2/mod_actions.so LoadModule speling_module libexec/apache2/mod_speling.so LoadModule userdir_module libexec/apache2/mod_userdir.so LoadModule alias_module libexec/apache2/mod_alias.so LoadModule rewrite_module libexec/apache2/mod_rewrite.so #LoadModule perl_module libexec/apache2/mod_perl.so LoadModule php5_module local/Cellar/php54/5.4.8/libexec/apache2/libphp5.so #LoadModule hfs_apple_module libexec/apache2/mod_hfs_apple.so <IfModule !mpm_netware_module> <IfModule !mpm_winnt_module> # # If you wish httpd to run as a different user or group, you must run # httpd as root initially and it will switch. # # User/Group: The name (or #number) of the user/group to run httpd as. # It is usually good practice to create a dedicated user and group for # running httpd, as with most system services. # User _www Group _www </IfModule> </IfModule> # 'Main' server configuration # # The directives in this section set up the values used by the 'main' # server, which responds to any requests that aren't handled by a # <VirtualHost> definition. These values also provide defaults for # any <VirtualHost> containers you may define later in the file. # # All of these directives may appear inside <VirtualHost> containers, # in which case these default settings will be overridden for the # virtual host being defined. # # # ServerAdmin: Your address, where problems with the server should be # e-mailed. This address appears on some server-generated pages, such # as error documents. e.g. [email protected] # ServerAdmin [email protected] # # ServerName gives the name and port that the server uses to identify itself. # This can often be determined automatically, but we recommend you specify # it explicitly to prevent problems during startup. # # If your host doesn't have a registered DNS name, enter its IP address here. # #ServerName www.example.com:80 # # DocumentRoot: The directory out of which you will serve your # documents. By default, all requests are taken from this directory, but # symbolic links and aliases may be used to point to other locations. # DocumentRoot "/Library/WebServer/Documents" # # Each directory to which Apache has access can be configured with respect # to which services and features are allowed and/or disabled in that # directory (and its subdirectories). # # First, we configure the "default" to be a very restrictive set of # features. # <Directory /> Options FollowSymLinks AllowOverride None Order deny,allow Deny from all </Directory> # # Note that from this point forward you must specifically allow # particular features to be enabled - so if something's not working as # you might expect, make sure that you have specifically enabled it # below. # # # This should be changed to whatever you set DocumentRoot to. # <Directory "/Library/WebServer/Documents"> # # Possible values for the Options directive are "None", "All", # or any combination of: # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews # # Note that "MultiViews" must be named *explicitly* --- "Options All" # doesn't give it to you. # # The Options directive is both complicated and important. Please see # http://httpd.apache.org/docs/2.2/mod/core.html#options # for more information. # Options Indexes FollowSymLinks MultiViews # # AllowOverride controls what directives may be placed in .htaccess files. # It can be "All", "None", or any combination of the keywords: # Options FileInfo AuthConfig Limit # AllowOverride None # # Controls who can get stuff from this server. # Order allow,deny Allow from all </Directory> # # DirectoryIndex: sets the file that Apache will serve if a directory # is requested. # <IfModule dir_module> DirectoryIndex index.html </IfModule> # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <FilesMatch "^\.([Hh][Tt]|[Dd][Ss]_[Ss])"> Order allow,deny Deny from all Satisfy All </FilesMatch> # # Apple specific filesystem protection. # <Files "rsrc"> Order allow,deny Deny from all Satisfy All </Files> <DirectoryMatch ".*\.\.namedfork"> Order allow,deny Deny from all Satisfy All </DirectoryMatch> # # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog "/private/var/log/apache2/error_log" # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn <IfModule log_config_module> # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common <IfModule logio_module> # You need to enable mod_logio.c to use %I and %O LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio </IfModule> # # The location and format of the access logfile (Common Logfile Format). # If you do not define any access logfiles within a <VirtualHost> # container, they will be logged here. Contrariwise, if you *do* # define per-<VirtualHost> access logfiles, transactions will be # logged therein and *not* in this file. # CustomLog "/private/var/log/apache2/access_log" common # # If you prefer a logfile with access, agent, and referer information # (Combined Logfile Format) you can use the following directive. # #CustomLog "/private/var/log/apache2/access_log" combined </IfModule> <IfModule alias_module> # # Redirect: Allows you to tell clients about documents that used to # exist in your server's namespace, but do not anymore. The client # will make a new request for the document at its new location. # Example: # Redirect permanent /foo http://www.example.com/bar # # Alias: Maps web paths into filesystem paths and is used to # access content that does not live under the DocumentRoot. # Example: # Alias /webpath /full/filesystem/path # # If you include a trailing / on /webpath then the server will # require it to be present in the URL. You will also likely # need to provide a <Directory> section to allow access to # the filesystem path. # # ScriptAlias: This controls which directories contain server scripts. # ScriptAliases are essentially the same as Aliases, except that # documents in the target directory are treated as applications and # run by the server when requested rather than as documents sent to the # client. The same rules about trailing "/" apply to ScriptAlias # directives as to Alias. # ScriptAliasMatch ^/cgi-bin/((?!(?i:webobjects)).*$) "/Library/WebServer/CGI-Executables/$1" </IfModule> <IfModule cgid_module> # # ScriptSock: On threaded servers, designate the path to the UNIX # socket used to communicate with the CGI daemon of mod_cgid. # #Scriptsock /private/var/run/cgisock </IfModule> # # "/Library/WebServer/CGI-Executables" should be changed to whatever your ScriptAliased # CGI directory exists, if you have that configured. # <Directory "/Library/WebServer/CGI-Executables"> AllowOverride None Options None Order allow,deny Allow from all </Directory> # # DefaultType: the default MIME type the server will use for a document # if it cannot otherwise determine one, such as from filename extensions. # If your server contains mostly text or HTML documents, "text/plain" is # a good value. If most of your content is binary, such as applications # or images, you may want to use "application/octet-stream" instead to # keep browsers from trying to display binary files as though they are # text. # DefaultType text/plain <IfModule mime_module> # # TypesConfig points to the file containing the list of mappings from # filename extension to MIME-type. # TypesConfig /private/etc/apache2/mime.types # # AddType allows you to add to or override the MIME configuration # file specified in TypesConfig for specific file types. # #AddType application/x-gzip .tgz # # AddEncoding allows you to have certain browsers uncompress # information on the fly. Note: Not all browsers support this. # #AddEncoding x-compress .Z #AddEncoding x-gzip .gz .tgz # # If the AddEncoding directives above are commented-out, then you # probably should define those extensions to indicate media types: # AddType application/x-compress .Z AddType application/x-gzip .gz .tgz # # AddHandler allows you to map certain file extensions to "handlers": # actions unrelated to filetype. These can be either built into the server # or added with the Action directive (see below) # # To use CGI scripts outside of ScriptAliased directories: # (You will also need to add "ExecCGI" to the "Options" directive.) # #AddHandler cgi-script .cgi # For type maps (negotiated resources): #AddHandler type-map var # # Filters allow you to process content before it is sent to the client. # # To parse .shtml files for server-side includes (SSI): # (You will also need to add "Includes" to the "Options" directive.) # #AddType text/html .shtml #AddOutputFilter INCLUDES .shtml </IfModule> # # The mod_mime_magic module allows the server to use various hints from the # contents of the file itself to determine its type. The MIMEMagicFile # directive tells the module where the hint definitions are located. # #MIMEMagicFile /private/etc/apache2/magic # # Customizable error responses come in three flavors: # 1) plain text 2) local redirects 3) external redirects # # Some examples: #ErrorDocument 500 "The server made a boo boo." #ErrorDocument 404 /missing.html #ErrorDocument 404 "/cgi-bin/missing_handler.pl" #ErrorDocument 402 http://www.example.com/subscription_info.html # # # MaxRanges: Maximum number of Ranges in a request before # returning the entire resource, or one of the special # values 'default', 'none' or 'unlimited'. # Default setting is to accept 200 Ranges. #MaxRanges unlimited # # EnableMMAP and EnableSendfile: On systems that support it, # memory-mapping or the sendfile syscall is used to deliver # files. This usually improves server performance, but must # be turned off when serving from networked-mounted # filesystems or if support for these functions is otherwise # broken on your system. # #EnableMMAP off #EnableSendfile off # 6894961 TraceEnable off # Supplemental configuration # # The configuration files in the /private/etc/apache2/extra/ directory can be # included to add extra features or to modify the default configuration of # the server, or you may simply copy their contents here and change as # necessary. # Server-pool management (MPM specific) Include /private/etc/apache2/extra/httpd-mpm.conf # Multi-language error messages #Include /private/etc/apache2/extra/httpd-multilang-errordoc.conf # Fancy directory listings Include /private/etc/apache2/extra/httpd-autoindex.conf # Language settings Include /private/etc/apache2/extra/httpd-languages.conf # User home directories Include /private/etc/apache2/extra/httpd-userdir.conf # Real-time info on requests and configuration #Include /private/etc/apache2/extra/httpd-info.conf # Virtual hosts #Include /private/etc/apache2/extra/httpd-vhosts.conf # Local access to the Apache HTTP Server Manual Include /private/etc/apache2/extra/httpd-manual.conf # Distributed authoring and versioning (WebDAV) #Include /private/etc/apache2/extra/httpd-dav.conf # Various default settings #Include /private/etc/apache2/extra/httpd-default.conf # Secure (SSL/TLS) connections #Include /private/etc/apache2/extra/httpd-ssl.conf # # Note: The following must must be present to support # starting without SSL on platforms with no /dev/random equivalent # but a statically compiled-in mod_ssl. # <IfModule ssl_module> SSLRandomSeed startup builtin SSLRandomSeed connect builtin </IfModule> Include /private/etc/apache2/other/*.conf Please help me, I've spent 2 days trying to make it work. Btw error log keep saying [Tue Nov 20 10:47:40 2012] [error] proxy: HTTP: disabled connection for (localhost) and [Tue Nov 20 11:59:32 2012] [error] (61)Connection refused: proxy: HTTP: attempt to connect to [fe80::1]:20559 (localhost) failed

Search Results

Search found 4490 results on 180 pages for 'binary trees'.

Page 143/180 | < Previous Page | 139 140 141 142 143 144 145 146 147 148 149 150 | Next Page >

- by Rob

- by pedalpete

- by c0bra

- by Svish

- by WilliamKF

- by Dax

- by anonymous-one

- by Oesor

- by rlotun

- by CodeAngel

- by Rick Strahl

- by Dong Ruirong

- by frank.nimphius

- by mbcrump

- by Marko Mäkelä

- by Aligned

- by paul424

- by user277704

- by NLV

- by FastAl

- by FastAl

- by Sergei

- by I82Much

- by Sergei

- by zen

< Previous Page | 139 140 141 142 143 144 145 146 147 148 149 150 | Next Page >