Search Results

Search found 6288 results on 252 pages for 'credit card'.

Page 143/252 | < Previous Page | 139 140 141 142 143 144 145 146 147 148 149 150  | Next Page >

• Unable to enumerate USB device

  - by takeshin

  Hello, My syslog is constantly filled with messages like this: Oct 16 11:48:35 my-laptop kernel: [61470.980078] hub 1-0:1.0: unable to enumerate USB device on port 2 Oct 16 11:48:35 my-laptop kernel: [61471.192079] hub 3-0:1.0: unable to enumerate USB device on port 2 The only USB device I use is Microsoft Natural Wireless Laser Mouse 7000. The laptop model is HP dv9500, Ubuntu 10.10, but the same was in the versions before. How can I fix this? Edit: Here's the output of sudo lsusb: Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 003: ID 045e:071d Microsoft Corp. Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub All USB devices seems to be working fine. I have some problems with DVD-R and sound card, but they are not USB.

  Read the article

• Screen split oddly when OS is installed from a Live CD

  - by Brian

  Never used Linux before but I decided I want to start somewhere and Ubuntu seemed like the right place to start. I burned the 64bit version ISO onto a CD and installed it onto a fresh new hard drive I have. The Live CD works and the Live Distro thing works great. However when I attempt to install it, the screen splits oddly in a way where part of the right is on the left. Furthermore, after attempting to log in, the GUI doesn't show up and the computer would freeze and stay that way. However you can still move the cursor. I can't really get in or do anything (possibly because I don't know how) and tinker around since I am not too tech savvy. But I can follow instructions. Graphics Card Radeon hd 6670 I just tried the install with windows thing. There was the exact same problem.

  Read the article

• Wired internet speed is slow in Ubuntu 12.04

  - by RameshKatkam

  I have dual boot Windows 7 and Ubuntu 12.04 on my Dell N4110 laptop. I recently installed Ubuntu 12.04 on my existing windows 7 hard drive. I am experiencing very slow internet speed on Ubuntu(wired connection). But on Windows,internet is really fast. I disabled ipv6 by editing /etc/sysctl.conf No avail. Then i run the following command. sudo ethtool -s eth0 speed 100 duplex full autoneg off No benefit. I am having "Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05)" network card.

  Read the article

• Browser privacy improvement implications for websites

  - by phq

  On https://panopticlick.eff.org/ EFF let you test the number of uniquely identifying bits that the browser gives a website. Among these are HTTP header fields such as User-Agent, Accept, Accept-Language and later perhaps ETAG and If-Modified-Since. Also there is a lot of Information that javascript can get from the browser such as time-zone, screen resolution, complete list of fonts and plugins available. My first impression is, is all this information really usable/used on a majority of all websites? For example, how many sites does really send different content-types depending on the http accept header, or what fonts are available(I thought css had taken care of this)? Let's say of these headers/js functionality on day would be gone. Which ones would; never be noticed they were gone? impact user experience? impact server performance? immediately reimplemented because the Internet cannot work without it? Extra credit for differentiating between what can be done, what should be done and what is done in most situations.

  Read the article

• Install reliance Driver software in ubuntu 14.04

  - by A Umar Mukthar

  I'm Using Huawei ec 150 dongle. I need to install driver software It is quiet a big task for begineers in linux. So i took this matter over here. EDIT Output of lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 003: ID 12d1:140b Huawei Technologies Co., Ltd. EC1260 Wireless Data Modem HSD USB Card Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 003: ID 046d:c05a Logitech, Inc. M90/M100 Optical Mouse Bus 002 Device 002: ID 046d:c31d Logitech, Inc. Media Keyboard K200 Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

  Read the article

• Ubuntu 12.04 LTS Realtek RTL8192E Problems

  - by Logan

  My wifi is not working. I have tried ndiswrapper with the XP driver but that still did not work. Please explain to me in layman's terms. I can run commands so if you tell me exactly what to put, i will put it. Basically, ubuntu is not showing a wireless networks option and when I ran some command yesterday it said the driver was UNCLAIMED. Please help. This is a wintec card with realtek rtl8192E chip on it. It is a desktop computer. On a 20gb partition, other 60gb is for windows(yeah its an old desktop). Use windows installer to install ubuntu(this is one of the dell desktops that wont boot ubuntu from disk). So any help is appreciated and I would like to get this done THIS weekend.

  Read the article

• Proprietary Driver missing after Kernel upgrade

  - by Chris

  I recently upgraded my kernel to the Linux 3.4 kernel. Upon doing so, I found that it zapped my proprietary driver for my graphics card. As an alternative, I had saved Catalyst 12.8, but now it will not open through Software Center. I tried several other terminal methods, but it seems that many of these postings are bunk. They only work until you're almost done and then you get errors. I just need a little help from somebody who has been there, as I am new to Ubuntu. I'm kind of afraid to reboot because this is my 3rd full load of Ubuntu. Any ideas?

  Read the article

• How do I figure out which version of OpenCL comes with my nvidia-current-dev package?

  - by levesque

  I am running Ubuntu 10.04 with an nvidia geforce GT 240 card. I installed nvidia-current-dev with apt-get, thus I got a bunch of headers and lib files for OpenCL. However, I am unable to figure out if I have OpenCL 1.0 or 1.1 (could be 1.2, though I doubt it). Does anyone know a way to figure out which version of OpenCL comes with the nvidia-current-dev package (version: 195.36.24-0ubuntu1~10.04.2)? If not, is there another place where I could get an answer?

  Read the article

• Ubuntu 12.04 LTS x86_64 sound artifacts when scrolling with firefox

  - by Nh3xus

  I've been using Ubuntu since the 10.04 LTS version and i have a sound problem that still remain in my fresh install of the 12.04 LTS AMD64 version. This install has been performed by formatting the / partition and my documents were kept safe in the separated /home partition. The problem : When i listen to a audio or video source while browsing the web with Firefox, I have some sound artifacts when i'm scrolling and stops when i'm not doing it. This happens when i'm doing X11 related actions too, such as switching between virtuals desktops. Computer configuration of my laptop : - Ubuntu 12.04 LTS AMD64 - Plantronic USB Headphones - Intel HDA Audio sound card (laptop) with SigmaTel STAC9200 chip - AlsaMixer v 1.0.25 - Nvidia GeForce 7950 GTX with Nvidia 295.40 driver Any advices are welcome here :) Note : This is my first post on AskUbuntu.

  Read the article

• Probelm with ATI catalyst drivers in ubuntu 13.10

  - by Raja

  Recently I've installed dual boot ubuntu 13.10 alongside windows 8. My Laptop is Dell Inspiron 15, with AMD Radeon HD 7670 Video Card. Without fglrx my battery is draining to 1:30 hrs from 3:30hrs (In Ubuntu 13.04 but very slow booting ) so I installed fglrx using What is the correct way to install ATI Catalyst Video Drivers (fglrx)? But the problem is as you all know, Black Screen after logging into ubuntu. Tried so many solutions for this like reinstalling unity , ubuntu-desktop , compizconfig , etc.. but none helped except removing fglrx* completely. (But I need them very badly due to battery) Assuming that all hope is lost., Posting here as a final try.! Will be highly greatfull for those who helped :) PS : For those who think this question is a duplicate., Though the question may be a duplicate, but the answer is not! (so give me a assured solution for this problem before flagging this as duplicate., Kindly understand my frustation) Thank You !

  Read the article

• SQL SERVER – Using RAND() in User Defined Functions (UDF)

  - by pinaldave

  Here is the question I received in email. “Pinal, I am writing a function where we need to generate random password. While writing T-SQL I faced following issue. Everytime I tried to use RAND() function in my User Defined Function I am getting following error: Msg 443, Level 16, State 1, Procedure RandFn, Line 7 Invalid use of a side-effecting operator ‘rand’ within a function. Here is the simplified T-SQL code of the function which I am using: CREATE FUNCTION RandFn() RETURNS INT AS BEGIN DECLARE @rndValue INT SET @rndValue = RAND() RETURN @rndValue END GO I must use UDF so is there any workaround to use RAND function in UDF.” Here is the workaround how RAND() can be used in UDF. The scope of the blog post is not to discuss the advantages or disadvantages of the function or random function here but just to show how RAND() function can be used in UDF. RAND() function is directly not allowed to use in the UDF so we have to find alternate way to use the same function. This can be achieved by creating a VIEW which is using RAND() function and use the same VIEW in the UDF. Here is the step by step instructions. Create a VIEW using RAND function. CREATE VIEW rndView AS SELECT RAND() rndResult GO Create a UDF using the same VIEW. CREATE FUNCTION RandFn() RETURNS DECIMAL(18,18) AS BEGIN DECLARE @rndValue DECIMAL(18,18) SELECT @rndValue = rndResult FROM rndView RETURN @rndValue END GO Now execute the UDF and it will just work fine and return random result. SELECT dbo.RandFn() GO In T-SQL world, I have noticed that there are more than one solution to every problem. Is there any better solution to this question? Please post that question as a comment and I will include it with due credit. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Function, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: technology

  Read the article

• Wireless speed drops over time and doesn't get up if not reconnected

  - by Vili Lehto

  I am using Ubuntu 12.10 64bit and I have a Asus PCE-N15 wireless card(in PCI-E slot). The problem is that first when I connect to my WiFi network the speed is just fine, and actually my link speed never drops, it shows a solid 150mb/s+ link speed and good signal. But the download and upload speeds drop dramatically after couple minutes of use and I have to reconnect to fix this. Network is type IEEE 802.11bgn and uses WPA2/AES encryption. I don't have similar problems on the windows side, and the network is working fine on every other device. iwconfig shows this: wlan0 IEEE 802.11bgn ESSID:"WLAN-AP" Mode:Managed Frequency:2.412 GHz Access Point: 00:1E:AB:05:EF:31 Bit Rate=300 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr=2347 B Fragment thr:off Encryption key:off Power Management:off Link Quality=61/70 Signal level=-49 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:2 Missed beacon:0 So the question is: Is there a way to fix this? Thanks in advance.

  Read the article

• How can I configure the login screen to be displayed in portrait orientation?

  - by rocket101

  I just started using linux, and I have one question. I have a monitor that I rotated 90? clockwise, so it, being rectangle shaped, is taller than it is wider. Using the system settings in Ubuntu, I set it up, and it works great, except the login screen and loading screen are not rotated right. They are rotated in the "normal" way. Is this just a glitch, or is there some setting I overlooked? I am using the open source drivers, and it is an ATI card, if that matters.

  Read the article

• Can't get Optimus to work with Ironhide on an Asus N53SN

  - by Musaab

  I installed Ubuntu 11.10 (Same issue in 11.04 btw) and then I installed Ironhide. I went through the configuration, chose the one with the highest confirmation for my system and tested it: > Error: Module nvidia does not exist in /proc/modules > P50 Disabling nVidia Card Succeded (the spelling error is theirs) And it changes nothing. I tried other configurations and got worse results. This has really become a major headache. Any solutions?

  Read the article

• Very High CPU usage (100%) from just browsing the Web

  - by cole

  I tested on Firefox and Chromioum. Im at 100% while loading pages which causes them to load slow and when I dont have a application running Im at 40% CPU (At least) Everything is slow basically. Im also already on Ubuntu Classic so im not using Unity. Should I go to 10.04? is that more stable? On windows this wasnt an issue. I have a Dual Boot with XP and a 2.4Ghz Intel Celeron with 768MB RAM and an Nvidia 6200 Graphics card. I heard 10.04 was the most stable. any suggestions?

  Read the article

• Headset undetected when plugged in

  - by tough

  I have recently installed Ubuntu 12.04 in my machine which was running windows 7. I have been trying to configure the audio to work exactly as it used to work in Windows but never been able to do so. I have followed this link exactly. I am still not getting the required configuration. aslamixer command shows me with 5 adjustable controls as shown below Master "adjustable" Speaker "adjustable" PCM "adjustable" Front "adjustable" AND Beep "adjustable" Mic Jack Mic In or Lin In S/PDIF OO "in a box" S/PDIF D OO "in a box" S/PDIF P DIGITAL or Analog M It does not detect the headset jack when plugged in. I here mean to say that the sound form the speakers does not go off when I plug in my headset jack. How can I make this working. Some other googling also did not help. I am on Hp Pavilion DV7 machine. The chip is IDT 92HD75B3X5 and the card is HDA ATI SB.

  Read the article

• How can I get nvidia-settings to work?

  - by Palace Chan

  I have an ASUS N56VM-TB71 with a GeForce 630M graphics card. I have ubuntu 12.04 and when I vga plugged in a dell monitor, i am able to use it. When I then use my laptops hdmi port to plug in my second monitor, nothing happens, so I went to nvidia-settings and I got the error: You do not appear to be using the NVIDIA X Driver, please run nvidia-xconfig as root and restart the X server. I ran this command and rebooted but I still cannot access nvidia-settings and I keep getting that error even though my /etc/X11/xconf.org is the one that got generated by running that command! What can I do to get around that and use my second monitor as well?

  Read the article

• All video players display black screen.

  - by Dennis

  I'm working in 10.04 Lucid. All my video players (Movie Player and VLC) and the preview windows in editors (OpenShot and Pitivi) will only display a black screen when playing a video. The sound is fine and the videos work fine on other computers. I have tried multiple formats from varying sources .MOV taken from old ffmpeg projects, .AVI straight from a camera, .MP4 using h.264 from OpenShot on another system, .OGV from a gtk-recordmydesktop session on this very computer. I even get a pure black screen in the viewer when starting a remote session in VNC. This box has a GeForce 8400 GS using the Nvidia drivers in case it may be a card problem or setting.

  Read the article

• Brightness not working; HP Pavilion Dv6; ATI Radeon HD6770M

  - by Yogesh Dhamija

  I am new to Ubuntu, but so far I am loving it. I was always unable to change my brightness since I installed Ubuntu, but I figured that installing the latest ATI driver for my graphics card would work. I did, but I still can't change the brightness. The slider goes up and down, but the brightness stays the same (on full). I have switchable graphics, an ATI Radeon HD 6770M, and an Intel integrated GPU. Since I am new to Linux, I am not familiar with terminal, so you will have to spell everything out for me, including if you need more information and how to get it. Thanks.

  Read the article

• slow speed transfering files to a local network device

  - by F. Ariel Jung

  I'm having troubles copying files from my pc(ubuntu 13.04 64 bits) to a Media Center(WDTV Live: with an SATA2 HDD attached) through the local network. the speed is to slow, it's up to 2.0 MB/s image: http://s11.postimg.org/g1nuai92b/Captura_de_pantalla_de_2013_06_24_07_46_55.png (I don't use image tag because it is a big image) my PC has a wifi network card Tp Link TL-WN951N and it is connected to a TP Link TL-WDR3500 router via wifi, and the WDTV Live is connected via LAN here is a iwconfig: eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"TL-WDR3500" Mode:Managed Frequency:2.462 GHz Access Point: A0:F3:C1:6C:3B:F1 Bit Rate=39 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=62/70 Signal level=-48 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:33521 Invalid misc:2245290 Missed beacon:0 if more data is required I'll post it as needed. I can't figure this out, needed help. please

  Read the article

• Unable to mount samsung galaxy S3 via USB

  - by dez93_2000

  Connecting as either MTP or PTP: neither allows one to see pictures saved as default by phone camera to DCIM folder on external SD card. Similar problems with previous models (e.g. S2) were solvable by 'usb utilities' in wireless & networking settings, but this is no longer present. Other suggestions have mentioned uninstalling various libraries... but i don't wanna just start cutting stuff without knowing it'll help. Any thoughts? Seems like a pretty epic fail from google & samsung. There's not even a linux section on the relevant google site... despite android's usb driver being part of the linux kernel which powers android. Boo!

  Read the article

• Groovy/Grails course content

  - by Don

  Hi, Some Java developers have asked if I could give them a 2-day primer on Grails development. I'm assuming they're familiar with: Java language and libraries Java web development, e.g. Servlets, JSPs Spring Hibernate Client-side development, CSS, HTML, JavaScript I'm further assuming they have no experience with Groovy or Grails. AFAIK, the app that they'll be building is a new project, so there's no need to cover topics like using GORM with a legacy database. I'm trying to decide how I should structure the course, e.g. what topics to cover and how much time to spend on each. I reckon about 1/2 - 3/4 days on Groovy and the rest of the time on Grails would be adequate. I'll probably use the Groovy console to demonstrate the Groovy language concepts and a simple Grails app for explaining the conventions and structure of a Grails project. If anyone has a list of Groovy/Grails topics that I should cover, or even an outline of a similar course that they've given/taken, I'd be very grateful. Naturally, I will credit for any resources that I use during the course.

  Read the article

• Purple start screen - no splash screen

  - by Peter

  After installing Ubuntu 11.10 on a new computer everything worked fine for a few weeks and now suddenly when starting up Ubuntu I get a blank purple screen with no "ubuntu" splash and the 5 dots but the system does start up. What has happened to loose the ubuntu splash screen? Also, I've checked in the grub startup and it has "quiet splash" in the linux line. I have an ATI radeon 5450 graphics card which needed nomodeset to be added to the grub line when booting for the first time off the install CD but now this line has disappeared from the grub startup. Can anyone help. Thanks

  Read the article

• Secure Coding Practices in .NET

  - by SoftwareSecurity

  Thanks to everyone who helped pack the room at the Fox Valley Day of .NET.   This presentation was designed to help developers understand why secure coding is important, what areas to focus on and additional resources.  You can find the slides here. Remember to understand what you are really trying to protect within your application.  This needs to be a conversation between the application owner, developer and architect.  Understand what data (or Asset) needs to be protected.  This could be passwords, credit cards, Social Security Numbers.   This also may be business specific information like business confidential data etc.  Performing a Risk and Privacy Assessment & Threat Model on your applications even in a small way can help you organize this process. These are the areas to pay attention to when coding: Authentication & Authorization Logging & Auditing Event Handling Session and State Management Encryption Links requested Slides Books The Security Development Lifecycle: SDL: A Process for Developing Demonstrably More Secure Software Threat Modeling Writing Secure Code The Web Application Hackers Handbook  Secure Programming with Static Analysis   Other Resources: OWASP OWASP Top 10 OWASP WebScarab OWASP WebGoat Internet Storm Center Web Application Security Consortium Events: OWASP AppSec 2011 in Minneapolis

  Read the article

• Apple Cinema Display 23" and grub

  - by Joshua Pruitt

  As per the title, I'm running my display on an older 23" Apple Cinema Display (because I still love it, darn it). I'm pushing it with an ATI Radeon DVI dual-link PCIe card. It works just fine, except GRUB doesn't seem able to push out the 1920x1200 pixel resolution needed in order to show me a boot menu! So..., I keep a smaller second monitor connected as the primary display so that I can see the boot menu and boot the system (I don't use that display once booted). This is a goofy work-around, and I'd like to just use my single display exclusively to boot the machine. I found some grub codes for higher resolutions, but not for 1920x1200. Is it capable of this? Did I just miss it? Thanks in advance!!!

  Read the article

< Previous Page | 139 140 141 142 143 144 145 146 147 148 149 150  | Next Page >