Search Results

Search found 7592 results on 304 pages for 'dev'.

Page 143/304 | < Previous Page | 139 140 141 142 143 144 145 146 147 148 149 150  | Next Page >

• Sudo won't execute command as another user

  - by TOdorus

  I'm trying to get a unicorn server to start when the server boots. I've created a shell script which works if I log as the ubuntu user and run /etc/init.d/unicorn start Shell script #!/bin/sh case "$1" in start) cd /home/ubuntu/projects/asbest/current/ unicorn_rails -c /home/ubuntu/projects/asbest/current/config/unicorn.rb -D -E production ;; stop) if ps aux | awk '{print $2 }' | grep `cat ~/projects/asbest/current/tmp/pids/unicorn.pid`> /dev/null; then kill `cat ~/projects/asbest/current/tmp/pids/uni$ ;; restart) $0 stop $0 start ;; esac When I rebooted the server I noticed that the unicorn server wasn't listening to a socket. Since I ran the code succesfully as the ubuntu user I modified the script to let it always use the ubuntu user via sudo. #!/bin/sh case "$1" in start) cd /home/ubuntu/projects/asbest/current/ sudo -u ubuntu unicorn_rails -c /home/ubuntu/projects/asbest/current/config/unicorn.rb -D -E production ;; stop) if ps aux | awk '{print $2 }' | grep `cat ~/projects/asbest/current/tmp/pids/unicorn.pid`> /dev/null; then sudo -u ubuntu kill `cat ~/projects/asbest/current/tmp/pids/uni$ ;; restart) $0 stop $0 start ;; esac After rebooting unicorn still wouldn't start, so I tried running the script from the command line. Now I get the following error sudo: unicorn_rails: command not found I've searched high and low to what could cause this, but I'm afraid I've tapped my limited understanding of Linux. From what I can understand is that although sudo should use the ubuntu user to execute the commands, it still uses the environment of the root user, which isn't configured to run ruby or unicorn. Does anybody have any experience with this?

  Read the article

• Fedora 17 transparent Ethernet Bridge not forwarding IP traffic

  - by mcdoomington

  I am running on Fedora 17 with the latest ebtables and have been trying to setup a transparent bridge - using the following script, I send a ping through the bridged host and only see the requests on the bridge (among other traffic from eth0), BUT, arps and arp replies are making it through. My host is setup - Client 192.168.1.10 <-- eth0 -- eth2 192.168.1.20 Ethernet script: #!/bin/sh brctl addbr br0; brctl stp br0 on; brctl addif br0 eth0; brctl addif br0 eth2; (ifdown eth0 1>/dev/null 2>&1;); (ifdown eth2 1>/dev/null 2>&1;); ifconfig eth0 0.0.0.0 up; ifconfig eth2 0.0.0.0 up; echo "1" > /proc/sys/net/ipv4/ip_forward; ebtables -P INPUT DROP ebtables -P FORWARD DROP ebtables -P OUTPUT DROP ebtables -A FORWARD -p ipv4 -j ACCEPT ebtables -A FORWARD -p arp -j ACCEPT Any assistance would be great!

  Read the article

• OpenVPN Error : TLS Error: local/remote TLS keys are out of sync: [AF_INET]

  - by Lucidity

  Fist off thanks for reading this, I appreciate any and all suggestions. I am having some serious problems reconnecting to my OpenVPN client using Riseup.net's VPN. I have spent a few days banging my head against the wall in attempts to set this up on my iOS devices....but that is a whole other issue. I was however able to set it up on my Mac OS X specifically on my Windows Vista 32 bit BootCamp VM with relatively little trouble. To originally connect I only had to modify the recommended Config file very slightly (Config file included at the end of this post): - I had to enter the code directly into my config file - And change "dev tap" to "dev tun" So I was connected. (Note - I did test to ensure the VPN was actually working after I originally connected, it was. Also verified the .pem file (inserted as the coding in my config file) for authenticity). I left the VPN running. My computer went to sleep. Today I went to use the internet expecting (possibly incorrectly - I am now unsure if I was wrong to leave it running) to still be connected to the VPN. However I saw immediately I was not. I went to reconnect. And was (am) unable to. My logs after attempting to connect (and getting a connection failed dialog box) show everything working as it should (as far as I can tell) until the end where I get the following lines: Mon Sep 23 21:07:49 2013 us=276809 Initialization Sequence Completed Mon Sep 23 21:07:49 2013 us=276809 MANAGEMENT: >STATE:1379995669,CONNECTED,SUCCESS, OMITTED Mon Sep 23 21:22:50 2013 us=390350 Authenticate/Decrypt packet error: packet HMAC authentication failed Mon Sep 23 21:23:39 2013 us=862180 TLS Error: local/remote TLS keys are out of sync: [AF_INET] VPN IP OMITTED [2] Mon Sep 23 21:23:57 2013 us=395183 Authenticate/Decrypt packet error: packet HMAC authentication failed Mon Sep 23 22:07:41 2013 us=296898 TLS: soft reset sec=0 bytes=513834601/0 pkts=708032/0 Mon Sep 23 22:07:41 2013 us=671299 VERIFY OK: depth=1, C=US, O=Riseup Networks, L=Seattle, ST=WA, CN=Riseup Networks, [email protected] Mon Sep 23 22:07:41 2013 us=671299 VERIFY OK: depth=0, C=US, O=Riseup Networks, L=Seattle, ST=WA, CN=vpn.riseup.net Mon Sep 23 22:07:46 2013 us=772508 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Mon Sep 23 22:07:46 2013 us=772508 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Mon Sep 23 22:07:46 2013 us=772508 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Mon Sep 23 22:07:46 2013 us=772508 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Mon Sep 23 22:07:46 2013 us=772508 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 2048 bit RSA So I have searched for a solution online and I have included what I have attempted below, however I fear (know) I am not knowledgeable enough in this area to fix this myself. I apologize in advance for my ignorance. I do tech support for a living, but not this kind of tech support unfortunately. Other notes and troubleshooting done - - Windows Firewall is disabled completely, as well as other Anti-virus programs - Tor is disabled completely - No Proxies running - Time is correct in all locations - Router Firmware is up to date - Able to connect to the internet and as far as I can tell all necessary ports are open. - No settings have been altered since I was able to connect successfully. - Ethernet as well as wifi connections attempted, resulted in same error. Also tried adding the following lines to my config file (without success or change in error): persist-key persist-tun proto tcp (after reading that this error generally occurs on UDP connections, and is extremely rare on TCP) resolv-retry infinite (thinking the connection may have timed out since the issues occurred after leaving VPN connected during about 10 hrs of computer in sleep mode) All attempts resulted in exact same error code included at the top of this post. The original suggestions I found online stated - (regarding the TLS Error) - This error should resolve itself within 60 seconds, or if not quit wait 120 seconds and try again. (Which isnt the case here...) (regarding the Out of Sync" error) - If you continue to get "out of sync" errors and the link does not come up, then it means that something is probably wrong with your config file. You must use either ping and ping-restart on both sides of the connection, or keepalive on the server side of a client/server connection, in order to gracefully recover from "local/remote TLS keys are out of sync" errors. I wouldn't be surprised if my config file is lacking, or not correct. However I can confirm I followed the instructions to a tee. And was able to connect originally (and have not modified my settings or config file since I was able to connect to when the error began occurring). I have a very simple config file: client dev tun tun-mtu 1500 remote vpn.riseup.net auth-user-pass ca RiseupCA.pem redirect-gateway verb 4 <ca> -----BEGIN CERTIFICATE----- [OMITTED] -----END CERTIFICATE----- </ca> I would really appreciate any help or suggestions. I am at a total loss here, I know I'm asking a lot here. Though I am a new user on this site I help others on many forums including Microsoft's support community and especially Apple's support communities, so I will definitely pass on anything I learn here to help others. Thanks so so so much in advance for reading this.

  Read the article

• Gearman too many processes issue

  - by Roman Newaza

  I use Net_Gearman from PECL, Gearmand 1.1.11 and Gearman Manager. Every time I add background job, I can see new worker listed with no Function, nor Id in Ggearman-Monitor: If I add many messages in the bash loop, after some time it becomes very slow. for i in $(seq 0 9999); do php Client.php && echo $i; done Yesterday, the situation was even worse - I had many error messages in Gearmand log regarding Too many open files and once I added --file-descriptors=49152 as an option and swithched to 1.1.11 from 1.0.6, these errors gone. Here is lsof -p $(cat /var/run/gearman/gearmand.pid) output: COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME gearmand 2020 gearman cwd DIR 8,2 4096 2 / gearmand 2020 gearman rtd DIR 8,2 4096 2 / gearmand 2020 gearman txt REG 8,2 3852472 3672962 /opt/sbin/gearmand gearmand 2020 gearman mem REG 8,2 52120 9961752 /lib/x86_64-linux-gnu/libnss_files-2.15.so gearmand 2020 gearman mem REG 8,2 47680 9961756 /lib/x86_64-linux-gnu/libnss_nis-2.15.so gearmand 2020 gearman mem REG 8,2 97248 9961768 /lib/x86_64-linux-gnu/libnsl-2.15.so gearmand 2020 gearman mem REG 8,2 35680 9961750 /lib/x86_64-linux-gnu/libnss_compat-2.15.so gearmand 2020 gearman mem REG 8,2 92720 9964871 /lib/x86_64-linux-gnu/libz.so.1.2.3.4 gearmand 2020 gearman mem REG 8,2 109288 11014600 /usr/lib/x86_64-linux-gnu/libsasl2.so.2.0.25 gearmand 2020 gearman mem REG 8,2 1030512 9961759 /lib/x86_64-linux-gnu/libm-2.15.so gearmand 2020 gearman mem REG 8,2 1930616 9964982 /lib/x86_64-linux-gnu/libcrypto.so.1.0.0 gearmand 2020 gearman mem REG 8,2 382896 9964977 /lib/x86_64-linux-gnu/libssl.so.1.0.0 gearmand 2020 gearman mem REG 8,2 1815224 9961748 /lib/x86_64-linux-gnu/libc-2.15.so gearmand 2020 gearman mem REG 8,2 88384 9964865 /lib/x86_64-linux-gnu/libgcc_s.so.1 gearmand 2020 gearman mem REG 8,2 962656 11014043 /usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.16 gearmand 2020 gearman mem REG 8,2 199600 11016157 /usr/lib/x86_64-linux-gnu/libmemcached.so.11.0.0 gearmand 2020 gearman mem REG 8,2 31752 9961755 /lib/x86_64-linux-gnu/librt-2.15.so gearmand 2020 gearman mem REG 8,2 14768 9961763 /lib/x86_64-linux-gnu/libdl-2.15.so gearmand 2020 gearman mem REG 8,2 414280 9183971 /usr/lib/libboost_program_options.so.1.46.1 gearmand 2020 gearman mem REG 8,2 283832 9183656 /usr/lib/libevent-2.0.so.5.1.4 gearmand 2020 gearman mem REG 8,2 664504 11014432 /usr/lib/x86_64-linux-gnu/libsqlite3.so.0.8.6 gearmand 2020 gearman mem REG 8,2 135366 9961757 /lib/x86_64-linux-gnu/libpthread-2.15.so gearmand 2020 gearman mem REG 8,2 3534240 9175810 /usr/lib/libmysqlclient.so.18.1.0 gearmand 2020 gearman mem REG 8,2 149280 9961760 /lib/x86_64-linux-gnu/ld-2.15.so gearmand 2020 gearman 0u CHR 1,3 0t0 1029 /dev/null gearmand 2020 gearman 1u CHR 1,3 0t0 1029 /dev/null gearmand 2020 gearman 2u CHR 1,3 0t0 1029 /dev/null gearmand 2020 gearman 3w REG 8,2 9381897 3409366 /var/log/gearman-job-server/gearman.log gearmand 2020 gearman 4r FIFO 0,8 0t0 38869143 pipe gearmand 2020 gearman 5w FIFO 0,8 0t0 38869143 pipe gearmand 2020 gearman 6u 0000 0,9 0 6826 anon_inode gearmand 2020 gearman 7u unix 0xffff880230fdf500 0t0 38869144 socket gearmand 2020 gearman 8u unix 0xffff880230fdde40 0t0 38869145 socket gearmand 2020 gearman 9u IPv4 38869146 0t0 TCP localhost:4730 (LISTEN) gearmand 2020 gearman 10r FIFO 0,8 0t0 38869147 pipe gearmand 2020 gearman 11w FIFO 0,8 0t0 38869147 pipe gearmand 2020 gearman 12u 0000 0,9 0 6826 anon_inode gearmand 2020 gearman 13u unix 0xffff880230fde4c0 0t0 38869148 socket gearmand 2020 gearman 14u unix 0xffff880230fdeb40 0t0 38869149 socket gearmand 2020 gearman 15r FIFO 0,8 0t0 38869150 pipe gearmand 2020 gearman 16w FIFO 0,8 0t0 38869150 pipe gearmand 2020 gearman 17u 0000 0,9 0 6826 anon_inode gearmand 2020 gearman 18u 0000 0,9 0 6826 anon_inode gearmand 2020 gearman 19u unix 0xffff880230fdb400 0t0 38869151 socket gearmand 2020 gearman 20u unix 0xffff880230fdaa40 0t0 38869152 socket gearmand 2020 gearman 21r FIFO 0,8 0t0 38869153 pipe gearmand 2020 gearman 22w FIFO 0,8 0t0 38869153 pipe gearmand 2020 gearman 23u unix 0xffff880203cfce00 0t0 38868290 socket gearmand 2020 gearman 24u unix 0xffff880203cfdb00 0t0 38868291 socket gearmand 2020 gearman 25r FIFO 0,8 0t0 38868292 pipe gearmand 2020 gearman 26w FIFO 0,8 0t0 38868292 pipe gearmand 2020 gearman 27u 0000 0,9 0 6826 anon_inode gearmand 2020 gearman 28u unix 0xffff880203cf9040 0t0 38868293 socket gearmand 2020 gearman 29u unix 0xffff880203cfaa40 0t0 38868294 socket gearmand 2020 gearman 30r FIFO 0,8 0t0 38868295 pipe gearmand 2020 gearman 31w FIFO 0,8 0t0 38868295 pipe gearmand 2020 gearman 32u IPv4 38868324 0t0 TCP localhost:4730->localhost:57954 (ESTABLISHED) gearmand 2020 gearman 33u IPv4 38868325 0t0 TCP localhost:4730->localhost:57955 (ESTABLISHED) gearmand 2020 gearman 34u IPv4 38901247 0t0 TCP localhost:4730->localhost:38594 (ESTABLISHED) gearmand 2020 gearman 35u IPv4 38868327 0t0 TCP localhost:4730->localhost:57957 (ESTABLISHED) gearmand 2020 gearman 36u IPv4 38867483 0t0 TCP localhost:4730->localhost:57959 (ESTABLISHED) gearmand 2020 gearman 37u IPv4 38867484 0t0 TCP localhost:4730->localhost:57958 (ESTABLISHED) gearmand 2020 gearman 38u IPv4 38901248 0t0 TCP localhost:4730->localhost:38595 (CLOSE_WAIT) gearmand 2020 gearman 39u IPv4 38901249 0t0 TCP localhost:4730->localhost:38597 (ESTABLISHED) gearmand 2020 gearman 40u IPv4 38869201 0t0 TCP localhost:4730->localhost:57979 (ESTABLISHED) gearmand 2020 gearman 41u IPv4 38900437 0t0 TCP localhost:4730->localhost:38599 (ESTABLISHED) gearmand 2020 gearman 42u IPv4 38900438 0t0 TCP localhost:4730->localhost:38602 (ESTABLISHED) gearmand 2020 gearman 43u IPv4 38868375 0t0 TCP localhost:4730->localhost:57987 (ESTABLISHED) gearmand 2020 gearman 44u IPv4 38900468 0t0 TCP localhost:4730->localhost:38606 (CLOSE_WAIT) gearmand 2020 gearman 45u IPv4 38868381 0t0 TCP localhost:4730->localhost:57999 (ESTABLISHED) gearmand 2020 gearman 46u IPv4 38868388 0t0 TCP localhost:4730->localhost:58007 (ESTABLISHED) gearmand 2020 gearman 47u IPv4 38868393 0t0 TCP localhost:4730->localhost:58011 (ESTABLISHED) gearmand 2020 gearman 48u IPv4 38903950 0t0 TCP localhost:4730->localhost:38609 (ESTABLISHED) gearmand 2020 gearman 49u IPv4 38870276 0t0 TCP localhost:4730->localhost:58019 (ESTABLISHED) gearmand 2020 gearman 50u IPv4 38903955 0t0 TCP localhost:4730->localhost:38613 (ESTABLISHED) gearmand 2020 gearman 51u IPv4 38900477 0t0 TCP localhost:4730->localhost:38617 (CLOSE_WAIT) gearmand 2020 gearman 52u IPv4 38867630 0t0 TCP localhost:4730->localhost:58031 (ESTABLISHED) gearmand 2020 gearman 53u IPv4 38867633 0t0 TCP localhost:4730->localhost:58035 (ESTABLISHED) gearmand 2020 gearman 54u IPv4 38867636 0t0 TCP localhost:4730->localhost:58039 (ESTABLISHED) gearmand 2020 gearman 55u IPv4 38900536 0t0 TCP localhost:4730->localhost:38619 (ESTABLISHED) gearmand 2020 gearman 56u IPv4 38868419 0t0 TCP localhost:4730->localhost:58047 (ESTABLISHED) gearmand 2020 gearman 57u IPv4 38869263 0t0 TCP localhost:4730->localhost:58051 (ESTABLISHED) gearmand 2020 gearman 58u IPv4 38900537 0t0 TCP localhost:4730->localhost:38621 (ESTABLISHED) gearmand 2020 gearman 59u IPv4 38869271 0t0 TCP localhost:4730->localhost:58059 (ESTABLISHED) gearmand 2020 gearman 60u IPv4 38900538 0t0 TCP localhost:4730->localhost:38623 (ESTABLISHED) gearmand 2020 gearman 61u IPv4 38870319 0t0 TCP localhost:4730->localhost:58067 (ESTABLISHED) gearmand 2020 gearman 62u IPv4 38900540 0t0 TCP localhost:4730->localhost:38628 (ESTABLISHED) gearmand 2020 gearman 63u IPv4 38869289 0t0 TCP localhost:4730->localhost:58075 (ESTABLISHED) ... gearmand 2020 gearman 2229u IPv4 38903885 0t0 TCP localhost:4730->localhost:38572 (ESTABLISHED) gearmand 2020 gearman 2230u IPv4 38901211 0t0 TCP localhost:4730->localhost:38576 (ESTABLISHED) gearmand 2020 gearman 2234u IPv4 38901237 0t0 TCP localhost:4730->localhost:38588 (ESTABLISHED)

  Read the article

• How to create multiboot flash drive

  - by Nrew

  I've found a guide here: http://www.pendrivelinux.com/boot-multiple-iso-from-usb-multiboot-usb/ And found this menu.lst in my flash drive, which seems to be the one that I'm seeing when I boot using my flash drive: # This Menu Created by Lance http://www.pendrivelinux.com # Ongoing Suggested Menu Entries and the Suggestor are noted! default 0 timeout 30 color NORMAL HIGHLIGHT HELPTEXT HEADING splashimage=(hd0,0)/splash.xpm.gz foreground=FFFFFF background=0066FF title Memtest86+ find --set-root /memtest86+-4.00.iso map --mem /memtest86+-4.00.iso (hd32) map --hook root (hd32) chainloader (hd32) # Suggested by madprofessor title Boot Clonezilla root (hd0,0) kernel /clonezilla/live/vmlinuz live-media-path=clonezilla/live bootfrom=/dev/sd boot=live union=aufs noprompt ocs_live_run="ocs-live-general" ocs_live_extra_param="" ocs_live_keymap="" ocs_live_batch="no" ocs_lang="" vga=791 ip=frommedia initrd /clonezilla/live/initrd.img title Parted Magic 4.9 (Partition Tools) find --set-root /pmagic-4.9.iso map /pmagic-4.9.iso (hd32) map --hook root (hd32) chainloader (hd32) # Suggested by Deb title Partition Wizard 4.2 (Partition Tools) find --set-root /pwhe42.iso map /pwhe42.iso (hd32) map --hook root (hd32) chainloader (hd32) title Balder DOS image (FreeDOS) map --unsafe-boot /balder10.img (fd0) map --hook chainloader --force (fd0)+1 rootnoverify (fd0) # Suggested by Szymon Silski title Linux Mint 8 find --set-root /LinuxMint-8.iso map /LinuxMint-8.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/mint.seed boot=casper persistent iso-scan/filename=/LinuxMint-8.iso splash initrd /casper/initrd.lz title Ubuntu 10.04 find --set-root /ubuntu-10.04-desktop-i386.iso map /ubuntu-10.04-desktop-i386.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper persistent iso-scan/filename=/ubuntu-10.04-desktop-i386.iso splash initrd /casper/initrd.lz title Xubuntu 10.04 (XFCE Desktop) find --set-root /xubuntu-10.04-desktop-i386.iso map /xubuntu-10.04-desktop-i386.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/xubuntu.seed boot=casper persistent iso-scan/filename=/xubuntu-10.04-desktop-i386.iso splash initrd /casper/initrd.lz title Kubuntu 10.04 (KDE Desktop) find --set-root /kubuntu-10.04-desktop-i386.iso map /kubuntu-10.04-desktop-i386.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/kubuntu.seed boot=casper persistent iso-scan/filename=/kubuntu-10.04-desktop-i386.iso splash initrd /casper/initrd.lz # Suggested by Ambriel title Lubuntu 10.04 (LXDE Lightweight Desktop) find --set-root /lubuntu-10.04.iso map /lubuntu-10.04.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper persistent iso-scan/filename=/lubuntu-10.04.iso splash initrd /casper/initrd.lz title Ubuntu 10.04 Netbook Remix (NetBook Distro) find --set-root /ubuntu-10.04-netbook-i386.iso map /ubuntu-10.04-netbook-i386.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/netbook-remix.seed boot=casper persistent iso-scan/filename=/ubuntu-10.04-netbook-i386.iso splash initrd /casper/initrd.lz title Ubuntu 10.04 Server Edition Installer (32 bit Installer Only) find --set-root /ubuntu-10.04-server-i386.iso map /ubuntu-10.04-server-i386.iso (0xff) map --hook root (0xff) kernel /install/vmlinuz file=/cdrom/preseed/ubuntu-server.seed boot=install iso-scan/filename=/ubuntu-10.04-server-i386.iso splash initrd /install/initrd.gz title Ubuntu 9.10 find --set-root /ubuntu-9.10-desktop-i386.iso map /ubuntu-9.10-desktop-i386.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper persistent iso-scan/filename=/ubuntu-9.10-desktop-i386.iso splash initrd /casper/initrd.lz title Xubuntu 9.10 find --set-root /xubuntu-9.10-desktop-i386.iso map /xubuntu-9.10-desktop-i386.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/xubuntu.seed boot=casper persistent iso-scan/filename=/xubuntu-9.10-desktop-i386.iso splash initrd /casper/initrd.lz title Kubuntu 9.10 find --set-root /kubuntu-9.10-desktop-i386.iso map /kubuntu-9.10-desktop-i386.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/kubuntu.seed boot=casper persistent iso-scan/filename=/kubuntu-9.10-desktop-i386.iso splash initrd /casper/initrd.lz # Ubuntu Server and Netbook Remix suggested by Wojciech Holek title Ubuntu 9.10 Server Edition Installer (Installer Only) find --set-root /ubuntu-9.10-server-i386.iso map /ubuntu-9.10-server-i386.iso (0xff) map --hook root (0xff) kernel /install/vmlinuz file=/cdrom/preseed/ubuntu-server.seed boot=install iso-scan/filename=/ubuntu-9.10-server-i386.iso splash initrd /install/initrd.gz title Ubuntu 9.10 Netbook Remix (NetBook Distro) find --set-root /ubuntu-9.10-netbook-remix-i386.iso map /ubuntu-9.10-netbook-remix-i386.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/netbook-remix.seed boot=casper persistent iso-scan/filename=/ubuntu-9.10-netbook-remix-i386.iso splash initrd /casper/initrd.lz title Ubuntu 9.10 Rescue Remix (Recovery Tools) find --set-root /ubuntu-rescue-remix-9-10-revision1.iso map /ubuntu-rescue-remix-9-10-revision1.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper iso-scan/filename=/ubuntu-rescue-remix-9-10-revision1.iso splash initrd /casper/initrd.lz title DSL 4.4.10 find --set-root /dsl-4.4.10-initrd.iso map --mem /dsl-4.4.10-initrd.iso (hd32) map --hook root (hd32) chainloader (hd32) title AVG Rescue CD (Anti-Virus + Anti-Spyware) find --set-root /avg_arl_en_90_100114.iso map /avg_arl_en_90_100114.iso (hd32) map --hook chainloader (hd32) title Ultimate Boot CD 4.11 find --set-root /ubcd411.iso map /ubcd411.iso (hd32) map --hook chainloader (hd32) title OphCrack XP 2.3.1 (XP Password Cracker) find --set-root /ophcrack-xp-livecd-2.3.1.iso map /ophcrack-xp-livecd-2.3.1.iso (0xff) map --hook root (0xff) kernel /boot/bzImage rw root=/dev/null vga=normal lang=C kmap=us screen=1024x768x16 autologin initrd /boot/rootfs.gz title OphCrack Vista 2.3.1 (Vista Password Cracker) find --set-root /ophcrack-vista-livecd-2.3.1.iso map /ophcrack-vista-livecd-2.3.1.iso (0xff) map --hook root (0xff) kernel /boot/bzImage rw root=/dev/null vga=normal lang=C kmap=us screen=1024x768x16 autologin initrd /boot/rootfs.gz # Suggested by Greg Steer title Offline NT Password & Registy Editor find --set-root /cd080802.iso map /cd080802.iso (hd32) map --hook chainloader (hd32) title SliTaz 2.0 find --set-root /slitaz-2.0.iso map --mem /slitaz-2.0.iso (hd32) map --hook chainloader (hd32) title Riplinux 9.3 find --set-root /RIPLinuX-9.3.iso map --heads=0 --sectors-per-track=0 /RIPLinuX-9.3.iso (0xff) || map --heads=0 --sectors-per-track=0 --mem /RIPLinuX-9.3.iso (0xff) map --hook chainloader (0xff) # Suggested by Sunny title YlmF (Windows Like OS) find --set-root /YlmF_OS_EN_v1.0.iso map /YlmF_OS_EN_v1.0.iso (0xff) map --hook root (0xff) kernel /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper persistent iso-scan/filename=/YlmF_OS_EN_v1.0.iso splash initrd /casper/initrd.lz # Suggested by Martin Andersson title DBAN 1.0.7 (Drive Nuker) find --set-root /dban-1.0.7_i386.iso map --mem /dban-1.0.7_i386.iso (hd32) map --hook root (hd32) chainloader (hd32) # Suggested by Robin McGough title xPUD 0.9.2 (NetBook Distro) find --set-root --ignore-floppies --ignore-cd /xpud-0.9.2.iso map --heads=0 --sectors-per-track=0 /xpud-0.9.2.iso (hd32) map --hook chainloader (hd32) title Puppy 4.3.1 find --set-root /puppy/pup-431.sfs kernel /puppy/vmlinuz initrd /puppy/initrd.gz # Suggested by Relst title Run a Linux OS from the Internet kernel /gpxe.lkrn I also put some .iso files for os installers (Windows xp sp2 and Ubuntu 10.04) But they didn't show up in the list when I booted Do I need to: extract the .iso files and put in in their respective folders? Add the os that I added on the menu.lst? How do I add the iso image(os) in the menu.lst? Before adding the .iso files I first made a folder named Windows xp sp2 then placed the .iso files in there. Please help, I think I need to add the folder name or the file name on the menu.lst but I don't know how

  Read the article

• Proper network configuration for a KVM guest to be on the same networks at the host

  - by Steve Madsen

  I am running a Debian Linux server on Lenny. Within it, I am running another Lenny instance using KVM. Both servers are externally available, with public IPs, as well as a second interface with private IPs for the LAN. Everything works fine, except the VM sees all network traffic as originating from the host server. I suspect this might have something to do with the iptables-based firewall I'm running on the host. What I'd like to figure out is: how to I properly configure the host's networking such that all of these requirements are met? Both host and VMs have 2 network interfaces (public and private). Both host and VMs can be independently firewalled. Ideally, VM traffic does not have to traverse the host firewall. VMs see real remote IP addresses, not the host's. Currently, the host's network interfaces are configured as bridges. eth0 and eth1 do not have IP addresses assigned to them, but br0 and br1 do. /etc/network/interfaces on the host: # The primary network interface auto br1 iface br1 inet static address 24.123.138.34 netmask 255.255.255.248 network 24.123.138.32 broadcast 24.123.138.39 gateway 24.123.138.33 bridge_ports eth1 bridge_stp off auto br1:0 iface br1:0 inet static address 24.123.138.36 netmask 255.255.255.248 network 24.123.138.32 broadcast 24.123.138.39 # Internal network auto br0 iface br0 inet static address 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 bridge_ports eth0 bridge_stp off This is the libvirt/qemu configuration file for the VM: <domain type='kvm'> <name>apps</name> <uuid>636b6620-0949-bc88-3197-37153b88772e</uuid> <memory>393216</memory> <currentMemory>393216</currentMemory> <vcpu>1</vcpu> <os> <type arch='i686' machine='pc'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='cdrom'> <target dev='hdc' bus='ide'/> <readonly/> </disk> <disk type='file' device='disk'> <source file='/raid/kvm-images/apps.qcow2'/> <target dev='vda' bus='virtio'/> </disk> <interface type='bridge'> <mac address='54:52:00:27:5e:02'/> <source bridge='br0'/> <model type='virtio'/> </interface> <interface type='bridge'> <mac address='54:52:00:40:cc:7f'/> <source bridge='br1'/> <model type='virtio'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target port='0'/> </console> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes' keymap='en-us'/> </devices> </domain> Along with the rest of my firewall rules, the firewalling script includes this command to pass packets destined for a KVM guest: # Allow bridged packets to pass (for KVM guests). iptables -A FORWARD -m physdev --physdev-is-bridged -j ACCEPT (Not applicable to this question, but a side-effect of my bridging configuration appears to be that I can't ever shut down cleanly. The kernel eventually tells me "unregister_netdevice: waiting for br1 to become free" and I have to hard reset the system. Maybe a sign I've done something dumb?)

  Read the article

• Skipping scheduled self-tests and predicting drive EOL

  - by Steve Madsen

  For a few weeks now, smartd has been reporting that it is skipping some of its scheduled self-tests on the weekends: Apr 24 18:29:32 calvin smartd[4758]: Device: /dev/sda, skip scheduled Offline Immediate Test; 40% remaining of current Self-Test. Apr 24 18:29:33 calvin smartd[4758]: Device: /dev/sdb, skip scheduled Offline Immediate Test; 50% remaining of current Self-Test. The drives in this RAID-1 array are set to run an offline test four times a day, a short self-test at 2am every day, and a long self-test on Saturdays at 2am. For some reason, it looks like the long self-test is taking longer, causing the other scheduled tests to be skipped. First question: is this a sign of likely drive failure? Then today, smartd reported that a self-test failed. Here is the output of smartctl -a /dev/sdb: smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.8 family Device Model: ST3250823AS Serial Number: 3ND1GNBC Firmware Version: 3.03 User Capacity: 250,059,350,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Sun Apr 25 13:15:34 2010 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 84) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 047 039 006 Pre-fail Always - 168450357 3 Spin_Up_Time 0x0003 098 098 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 33 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 9 7 Seek_Error_Rate 0x000f 087 060 030 Pre-fail Always - 654745480 9 Power_On_Hours 0x0032 055 055 000 Old_age Always - 40141 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 51 194 Temperature_Celsius 0x0022 037 062 000 Old_age Always - 37 (0 17 0 0) 195 Hardware_ECC_Recovered 0x001a 047 039 000 Old_age Always - 168450357 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 40131 - # 2 Extended offline Completed: read failure 30% 40129 379795511 # 3 Short offline Completed without error 00% 40084 - # 4 Short offline Completed without error 00% 40060 - # 5 Short offline Completed without error 00% 40036 - # 6 Short offline Completed without error 00% 40013 - # 7 Short offline Completed without error 00% 39990 - # 8 Extended offline Completed without error 00% 39977 - # 9 Short offline Completed without error 00% 39919 - #10 Short offline Completed without error 00% 39895 - #11 Short offline Completed without error 00% 39872 - #12 Short offline Completed without error 00% 39848 - #13 Short offline Completed without error 00% 39824 - #14 Short offline Completed without error 00% 39801 - #15 Extended offline Completed without error 00% 39789 - #16 Short offline Completed without error 00% 39754 - #17 Short offline Completed without error 00% 39732 - #18 Short offline Completed without error 00% 39707 - #19 Short offline Completed without error 00% 39683 - #20 Short offline Completed without error 00% 39660 - #21 Short offline Completed without error 00% 39636 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. Given that this drive is about 4.5 years old, I am probably tempting fate by keeping it in service. SMART doesn't seem to get much respect as a reliable way to predict drive failure. What else can I use to get an early indication of drive failure?

  Read the article

• Can't log in via SSH to any accounts set to use /bin/bash as a default shell

  - by Gui Ambros

  I'm trying to install bash as the default shell on a ARM Linux running on an embedded device (Synology DS212+ NAS). But there's something really wrong, and I can't figure out what it is. Symptoms: 1) Root has /bin/bash as default shell, and can log in normally via SSH: $ grep root /etc/passwd root:x:0:0:root:/root:/bin/bash $ ssh root@NAS root@NAS's password: Last login: Sun Dec 16 14:06:56 2012 from desktop # 2) joeuser has /bin/bash as default shell, and receives "Permission denied" when trying to log in via SSH: $ grep joeuser /etc/passwd joeuser:x:1029:100:Joe User:/home/joeuser:/bin/bash $ ssh joeuser@localhost joeuser@NAS's password: Last login: Sun Dec 16 14:07:22 2012 from desktop Permission denied, please try again. Connection to localhost closed. 3) changing joeuser's shell back to /bin/sh: $ grep joeuser /etc/passwd joeuser:x:1029:100:Joe User:/home/joeuser:/bin/sh $ ssh joeuser@localhost Last login: Sun Dec 16 15:50:52 2012 from localhost $ To make things even more strange, I can log in as joeuser using /bin/bash using the serial console (!). Also a su - joeuser as root works fine, so the bash binary itself is working fine. In an act of despair, I changed joeuser's uid to 0 on /etc/passwd, but also didn't work, so it doesn't seem to be anything permission related. Seems that bash is doing some extra checking that sshd didn't like, and blocking the connections for non-root users. Maybe some sort of sanity checking - or terminal emulation - that is triggering the SIGCHLD, but only when called via ssh. I already went through every single item on sshd_config, and also put SSHD in debug mode, but didn't find anything strange. Here's my /etc/ssh/sshd_config: LogLevel DEBUG LoginGraceTime 2m PermitRootLogin yes RSAAuthentication yes PubkeyAuthentication yes AuthorizedKeysFile %h/.ssh/authorized_keys ChallengeResponseAuthentication no UsePAM yes AllowTcpForwarding no ChrootDirectory none Subsystem sftp internal-sftp -f DAEMON -u 000 And here's the output from /usr/syno/sbin/sshd -d, showing the failed attempt of joeuser trying to log in, with /bin/bash as the shell: debug1: Config token is loglevel debug1: Config token is logingracetime debug1: Config token is permitrootlogin debug1: Config token is rsaauthentication debug1: Config token is pubkeyauthentication debug1: Config token is authorizedkeysfile debug1: Config token is challengeresponseauthentication debug1: Config token is usepam debug1: Config token is allowtcpforwarding debug1: Config token is chrootdirectory debug1: Config token is subsystem debug1: HPN Buffer Size: 87380 debug1: sshd version OpenSSH_5.8p1-hpn13v11 debug1: read PEM private key done: type RSA debug1: private host key: #0 type 1 RSA debug1: read PEM private key done: type DSA debug1: private host key: #1 type 2 DSA debug1: read PEM private key done: type ECDSA debug1: private host key: #2 type 3 ECDSA debug1: rexec_argv[0]='/usr/syno/sbin/sshd' debug1: rexec_argv[1]='-d' Set /proc/self/oom_adj from 0 to -17 debug1: Bind to port 22 on ::. debug1: Server TCP RWIN socket size: 87380 debug1: HPN Buffer Size: 87380 Server listening on :: port 22. debug1: Bind to port 22 on 0.0.0.0. debug1: Server TCP RWIN socket size: 87380 debug1: HPN Buffer Size: 87380 Server listening on 0.0.0.0 port 22. debug1: Server will not fork when running in debugging mode. debug1: rexec start in 6 out 6 newsock 6 pipe -1 sock 9 debug1: inetd sockets after dupping: 4, 4 Connection from 127.0.0.1 port 52212 debug1: HPN Disabled: 0, HPN Buffer Size: 87380 debug1: Client protocol version 2.0; client software version OpenSSH_5.8p1-hpn13v11 SSH: Server;Ltype: Version;Remote: 127.0.0.1-52212;Protocol: 2.0;Client: OpenSSH_5.8p1-hpn13v11 debug1: match: OpenSSH_5.8p1-hpn13v11 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.8p1-hpn13v11 debug1: permanently_set_uid: 1024/100 debug1: MYFLAG IS 1 debug1: list_hostkey_types: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: AUTH STATE IS 0 debug1: REQUESTED ENC.NAME is 'aes128-ctr' debug1: kex: client->server aes128-ctr hmac-md5 none SSH: Server;Ltype: Kex;Remote: 127.0.0.1-52212;Enc: aes128-ctr;MAC: hmac-md5;Comp: none debug1: REQUESTED ENC.NAME is 'aes128-ctr' debug1: kex: server->client aes128-ctr hmac-md5 none debug1: expecting SSH2_MSG_KEX_ECDH_INIT debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: KEX done debug1: userauth-request for user joeuser service ssh-connection method none SSH: Server;Ltype: Authname;Remote: 127.0.0.1-52212;Name: joeuser debug1: attempt 0 failures 0 debug1: Config token is loglevel debug1: Config token is logingracetime debug1: Config token is permitrootlogin debug1: Config token is rsaauthentication debug1: Config token is pubkeyauthentication debug1: Config token is authorizedkeysfile debug1: Config token is challengeresponseauthentication debug1: Config token is usepam debug1: Config token is allowtcpforwarding debug1: Config token is chrootdirectory debug1: Config token is subsystem debug1: PAM: initializing for "joeuser" debug1: PAM: setting PAM_RHOST to "localhost" debug1: PAM: setting PAM_TTY to "ssh" debug1: userauth-request for user joeuser service ssh-connection method password debug1: attempt 1 failures 0 debug1: do_pam_account: called Accepted password for joeuser from 127.0.0.1 port 52212 ssh2 debug1: monitor_child_preauth: joeuser has been authenticated by privileged process debug1: PAM: establishing credentials User child is on pid 9129 debug1: Entering interactive session for SSH2. debug1: server_init_dispatch_20 debug1: server_input_channel_open: ctype session rchan 0 win 65536 max 16384 debug1: input_session_request debug1: channel 0: new [server-session] debug1: session_new: session 0 debug1: session_open: channel 0 debug1: session_open: session 0: link with channel 0 debug1: server_input_channel_open: confirm session debug1: server_input_global_request: rtype [email protected] want_reply 0 debug1: server_input_channel_req: channel 0 request pty-req reply 1 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req pty-req debug1: Allocating pty. debug1: session_new: session 0 debug1: session_pty_req: session 0 alloc /dev/pts/1 debug1: server_input_channel_req: channel 0 request shell reply 1 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req shell debug1: Setting controlling tty using TIOCSCTTY. debug1: Received SIGCHLD. debug1: session_by_pid: pid 9130 debug1: session_exit_message: session 0 channel 0 pid 9130 debug1: session_exit_message: release channel 0 debug1: session_by_tty: session 0 tty /dev/pts/1 debug1: session_pty_cleanup: session 0 release /dev/pts/1 Received disconnect from 127.0.0.1: 11: disconnected by user debug1: do_cleanup debug1: do_cleanup debug1: PAM: cleanup debug1: PAM: closing session debug1: PAM: deleting credentials Here you have the full output of sshd -dd, together with ssh -vv. Bash: # bash --version GNU bash, version 3.2.49(1)-release (arm-none-linux-gnueabi) Copyright (C) 2007 Free Software Foundation, Inc. The bash binary was cross compiled from source. I also tried using a pre-compiled binary from the Optware distribution, but had the exact same problem. I checked for missing shared libraries using objdump -x, but they're all there. Any ideas what could be causing this "Permission denied, please try again."? I'm almost diving in the bash source code to investigate, but trying to avoid hours chasing something that may be silly.

  Read the article

• rm on a directory with millions of files

  - by BMDan

  Background: physical server, about two years old, 7200-RPM SATA drives connected to a 3Ware RAID card, ext3 FS mounted noatime and data=ordered, not under crazy load, kernel 2.6.18-92.1.22.el5, uptime 545 days. Directory doesn't contain any subdirectories, just millions of small (~100 byte) files, with some larger (a few KB) ones. We have a server that has gone a bit cuckoo over the course of the last few months, but we only noticed it the other day when it started being unable to write to a directory due to it containing too many files. Specifically, it started throwing this error in /var/log/messages: ext3_dx_add_entry: Directory index full! The disk in question has plenty of inodes remaining: Filesystem Inodes IUsed IFree IUse% Mounted on /dev/sda3 60719104 3465660 57253444 6% / So I'm guessing that means we hit the limit of how many entries can be in the directory file itself. No idea how many files that would be, but it can't be more, as you can see, than three million or so. Not that that's good, mind you! But that's part one of my question: exactly what is that upper limit? Is it tunable? Before I get yelled at--I want to tune it down; this enormous directory caused all sorts of issues. Anyway, we tracked down the issue in the code that was generating all of those files, and we've corrected it. Now I'm stuck with deleting the directory. A few options here: rm -rf (dir)I tried this first. I gave up and killed it after it had run for a day and a half without any discernible impact. unlink(2) on the directory: Definitely worth consideration, but the question is whether it'd be faster to delete the files inside the directory via fsck than to delete via unlink(2). That is, one way or another, I've got to mark those inodes as unused. This assumes, of course, that I can tell fsck not to drop entries to the files in /lost+found; otherwise, I've just moved my problem. In addition to all the other concerns, after reading about this a bit more, it turns out I'd probably have to call some internal FS functions, as none of the unlink(2) variants I can find would allow me to just blithely delete a directory with entries in it. Pooh. while [ true ]; do ls -Uf | head -n 10000 | xargs rm -f 2/dev/null; done ) This is actually the shortened version; the real one I'm running, which just adds some progress-reporting and a clean stop when we run out of files to delete, is: export i=0; time ( while [ true ]; do ls -Uf | head -n 3 | grep -qF '.png' || break; ls -Uf | head -n 10000 | xargs rm -f 2/dev/null; export i=$(($i+10000)); echo "$i..."; done ) This seems to be working rather well. As I write this, it's deleted 260,000 files in the past thirty minutes or so. Now, for the questions: As mentioned above, is the per-directory entry limit tunable? Why did it take "real 7m9.561s / user 0m0.001s / sys 0m0.001s" to delete a single file which was the first one in the list returned by "ls -U", and it took perhaps ten minutes to delete the first 10,000 entries with the command in #3, but now it's hauling along quite happily? For that matter, it deleted 260,000 in about thirty minutes, but it's now taken another fifteen minutes to delete 60,000 more. Why the huge swings in speed? Is there a better way to do this sort of thing? Not store millions of files in a directory; I know that's silly, and it wouldn't have happened on my watch. Googling the problem and looking through SF and SO offers a lot of variations on "find" that obviously have the wrong idea; it's not going to be faster than my approach for several self-evident reasons. But does the delete-via-fsck idea have any legs? Or something else entirely? I'm eager to hear out-of-the-box (or inside-the-not-well-known-box) thinking. Thanks for reading the small novel; feel free to ask questions and I'll be sure to respond. I'll also update the question with the final number of files and how long the delete script ran once I have that. Final script output!: 2970000... 2980000... 2990000... 3000000... 3010000... real 253m59.331s user 0m6.061s sys 5m4.019s So, three million files deleted in a bit over four hours.

  Read the article

• Set up linux box for hosting a-z

  - by microchasm

  I am in the process of reinstalling the OS on a machine that will be used to host a couple of apps for our business. The apps will be local only; access from external clients will be via vpn only. The prior setup used a hosting control panel (Plesk) for most of the admin, and I was looking at using another similar piece of software for the reinstall - but I figured I should finally learn how it all works. I can do most of the things the software would do for me, but am unclear on the symbiosis of it all. This is all an attempt to further distance myself from the land of Configuration Programmer/Programmer, if at all possible. I can't find a full walkthrough anywhere for what I'm looking for, so I thought I'd put up this question, and if people can help me on the way I will edit this with the answers, and document my progress/pitfalls. Hopefully someday this will help someone down the line. The details: CentOS 5.5 x86_64 httpd: Apache/2.2.3 mysql: 5.0.77 (to be upgraded) php: 5.1 (to be upgraded) The requirements: SECURITY!! Secure file transfer Secure client access (SSL Certs and CA) Secure data storage Virtualhosts/multiple subdomains Local email would be nice, but not critical The Steps: Download latest CentOS DVD-iso (torrent worked great for me). Install CentOS: While going through the install, I checked the Server Components option thinking I was going to be using another Plesk-like admin. In hindsight, considering I've decided to try to go my own way, this probably wasn't the best idea. Basic config: Setup users, networking/ip address etc. Yum update/upgrade. Upgrade PHP/MySQL: To upgrade PHP and MySQL to the latest versions, I had to look to another repo outside CentOS. IUS looks great and I'm happy I found it! Add IUS repository to our package manager cd /tmp wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/epel-release-1-1.ius.el5.noarch.rpm rpm -Uvh epel-release-1-1.ius.el5.noarch.rpm wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/ius-release-1-4.ius.el5.noarch.rpm rpm -Uvh ius-release-1-4.ius.el5.noarch.rpm yum list | grep -w \.ius\. # list all the packages in the IUS repository; use this to find PHP/MySQL version and libraries you want to install Remove old version of PHP and install newer version from IUS rpm -qa | grep php # to list all of the installed php packages we want to remove yum shell # open an interactive yum shell remove php-common php-mysql php-cli #remove installed PHP components install php53 php53-mysql php53-cli php53-common #add packages you want transaction solve #important!! checks for dependencies transaction run #important!! does the actual installation of packages. [control+d] #exit yum shell php -v PHP 5.3.2 (cli) (built: Apr 6 2010 18:13:45) Upgrade MySQL from IUS repository /etc/init.d/mysqld stop rpm -qa | grep mysql # to see installed mysql packages yum shell remove mysql mysql-server #remove installed MySQL components install mysql51 mysql51-server mysql51-devel transaction solve #important!! checks for dependencies transaction run #important!! does the actual installation of packages. [control+d] #exit yum shell service mysqld start mysql -v Server version: 5.1.42-ius Distributed by The IUS Community Project Upgrade instructions courtesy of IUS wiki: http://wiki.iuscommunity.org/Doc/ClientUsageGuide Install rssh (restricted shell) to provide scp and sftp access, without allowing ssh login cd /tmp wget http://dag.wieers.com/rpm/packages/rssh/rssh-2.3.2-1.2.el5.rf.x86_64.rpm rpm -ivh rssh-2.3.2-1.2.el5.rf.x86_64.rpm useradd -m -d /home/dev -s /usr/bin/rssh dev passwd dev Edit /etc/rssh.conf to grant access to SFTP to rssh users. vi /etc/rssh.conf Uncomment or add: allowscp allowsftp This allows me to connect to the machine via SFTP protocol in Transmit (my FTP program of choice; I'm sure it's similar with other FTP apps). rssh instructions appropriated (with appreciation!) from http://www.cyberciti.biz/tips/linux-unix-restrict-shell-access-with-rssh.html Set up virtual interfaces ifconfig eth1:1 192.168.1.3 up #start up the virtual interface cd /etc/sysconfig/network-scripts/ cp ifcfg-eth1 ifcfg-eth1:1 #copy default script and match name to our virtual interface vi ifcfg-eth1:1 #modify eth1:1 script #ifcfg-eth1:1 | modify so it looks like this: DEVICE=eth1:1 IPADDR=192.168.1.3 NETMASK=255.255.255.0 NETWORK=192.168.1.0 ONBOOT=yes NAME=eth1:1 Add more Virtual interfaces as needed by repeating. Because of the ONBOOT=yes line in the ifcfg-eth1:1 file, this interface will be brought up when the system boots, or the network starts/restarts. service network restart Shutting down interface eth0: [ OK ] Shutting down interface eth1: [ OK ] Shutting down loopback interface: [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface eth0: [ OK ] Bringing up interface eth1: [ OK ] ping 192.168.1.3 64 bytes from 192.168.1.3: icmp_seq=1 ttl=64 time=0.105 ms And this is where I'm at. I will keep editing this as I make progress. Any tips on how to Configure virtual interfaces/ip based virtual hosts for SSL, setting up a CA, or anything else would be appreciated.

  Read the article

• OpenVPN Server Ethernet Bridging Question

  - by Hooplad

  Hello All, I am having a difficult time properly configuring an ethernet bridge using OpenVPN 2.0.9 install on CentOS 5 ( VPN server ). The goal that I am trying to complete is to connect a VM ( instance running on the same CentOS machine ) acting as a Microsoft Business Contact Manager server. I would then like this "BCM server" to serve Windows XP clients on 192.168.1.0/24 network as well as clients connecting from VPN ( 10.8.0.0/24 ). The setup as it is now was based off a known working configuration. The problem with the working configuration was that it would allow to the client to connect and access everything running on the VPN server ( SVN, Samba, VM Server ) but not any computers on the 192.168.1.0/24 network. I must disclose that the VPN server is behind a router/firewall. Ports are being forwarded correctly ( again, clients were able to connect to the VPN server with no problem. netcat confirms the udp port is open as well ). current ifconfig output br0 Link encap:Ethernet HWaddr 00:21:5E:4D:3A:C2 inet addr:192.168.1.169 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::221:5eff:fe4d:3ac2/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:846890 errors:0 dropped:0 overruns:0 frame:0 TX packets:3072351 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:42686842 (40.7 MiB) TX bytes:4540654180 (4.2 GiB) eth0 Link encap:Ethernet HWaddr 00:21:5E:4D:3A:C2 UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 RX packets:882641 errors:0 dropped:0 overruns:0 frame:0 TX packets:1781383 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:82342803 (78.5 MiB) TX bytes:2614727660 (2.4 GiB) Interrupt:169 eth1 Link encap:Ethernet HWaddr 00:21:5E:4D:3A:C3 UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 RX packets:650 errors:0 dropped:0 overruns:0 frame:0 TX packets:1347223 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:67403 (65.8 KiB) TX bytes:1959529142 (1.8 GiB) Interrupt:233 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:17452058 errors:0 dropped:0 overruns:0 frame:0 TX packets:17452058 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:94020256229 (87.5 GiB) TX bytes:94020256229 (87.5 GiB) tap0 Link encap:Ethernet HWaddr DE:18:C6:D7:01:63 inet6 addr: fe80::dc18:c6ff:fed7:163/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:3086 errors:0 dropped:166 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 b) TX bytes:315099 (307.7 KiB) vmnet1 Link encap:Ethernet HWaddr 00:50:56:C0:00:01 inet addr:192.168.177.1 Bcast:192.168.177.255 Mask:255.255.255.0 inet6 addr: fe80::250:56ff:fec0:1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:4224 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) vmnet8 Link encap:Ethernet HWaddr 00:50:56:C0:00:08 inet addr:192.168.55.1 Bcast:192.168.55.255 Mask:255.255.255.0 inet6 addr: fe80::250:56ff:fec0:8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:4226 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) current route table Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.55.0 * 255.255.255.0 U 0 0 0 vmnet8 192.168.177.0 * 255.255.255.0 U 0 0 0 vmnet1 192.168.1.0 * 255.255.255.0 U 0 0 0 br0 current iptables output Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT all -- anywhere anywhere Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere Chain OUTPUT (policy ACCEPT) target prot opt source destination server_known_working.conf local banshee port 1194 proto udp dev tap0 ca ca.crt cert banshee_server.crt key banshee_server.key dh dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt push "route 192.168.1.0 255.255.255.0" client-to-client keepalive 10 120 tls-auth ta.key 0 user nobody group nobody persist-key persist-tun status openvpn-status.log verb 4 The following is the current CentOS server config file. server_ethernet_bridged.conf ( current ) local 192.168.1.169 port 1194 proto udp dev tap0 ca ca.crt cert server.crt key server.key dh dh1024.pem ifconfig-pool-persist ipp.txt server-bridge 192.168.1.169 255.255.255.0 192.168.1.200 192.168.1.210 push "route 192.168.1.0 255.255.255.0 192.168.1.1" client-to-client keepalive 10 120 tls-auth ta.key 0 user nobody group nobody persist-key persist-tun status openvpn-status.log verb 6 The following is one of the client's config file that was used with the known working configuration. client.opvn client dev tap proto udp remote XXX.XXX.XXX 1194 resolv-retry infinite nobind persist-key persist-tun ca client.crt cert client.crt key client.key tls-auth client.key 1 verb 3 I have tried the HOWTO provided by OpenVPN as well as others http://www.thebakershome.net/openvpn%5Ftutorial?page=1 with no success. Any help or suggestions would be appreciated.

  Read the article

• How to add addtional disks to a Windows 2008 KVM based Guest?

  - by taazaa

  I have a Win 2008 KVM based guest VM running on a Ubuntu 10 host. It is a raw image of 22G. I want to add a "data" drive which would show up as "D:\" drive on the guest. I first created a raw image using: qemu-img create -f raw ~/vmdisk2.img 50G Then, tried attaching it using virsh attach-disk. When that did not work, I tried editing the xml file of the VM directly. Both did not seem to work. I would greatly appreciate any help on how to do this and what the best practice is. I want to keep the base image small, so that I can clone it (hopefully) and then attach necessary storage based on the application at hand. Update: The xml of the vm before adding the second drive: <domain type='kvm'> <name>win08e-vm1</name> <uuid>183a4ba0-1c0b-0b04-ad01-aa7c3a4cb390</uuid> <memory>1048576</memory> <currentMemory>1048576</currentMemory> <vcpu>2</vcpu> <os> <type arch='x86_64' machine='pc-0.12'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='localtime'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/var/lib/libvirt/images/win08e-vm1.img'/> <target dev='hda' bus='ide'/> <address type='drive' controller='0' bus='0' unit='0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/home/taazaa/iso/Win08ER264.iso'/> <target dev='hdc' bus='ide'/> <readonly/> <address type='drive' controller='0' bus='1' unit='0'/> </disk> <controller type='ide' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <interface type='bridge'> <mac address='52:54:00:7f:a7:ae'/> <source bridge='br0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <input type='tablet' bus='usb'/> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes' keymap='en-us'/> <video> <model type='vga' vram='9216' heads='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </memballoon> </devices> </domain> Thanks!

  Read the article

• OpenVPN (HideMyAss) client on Ubuntu: Route only HTTP traffic

  - by Andersmith

  I want to use HideMyAss VPN (hidemyass.com) on Ubuntu Linux to route only HTTP (ports 80 & 443) traffic to the HideMyAss VPN server, and leave all the other traffic (MySQL, SSH, etc.) alone. I'm running Ubuntu on AWS EC2 instances. The problem is that when I try and run the default HMA script, I suddenly can't SSH into the Ubuntu instance anymore and have to reboot it from the AWS console. I suspect the Ubuntu instance will also have trouble connecting to the RDS MySQL database, but haven't confirmed it. HMA uses OpenVPN like this: sudo openvpn client.cfg The client configuration file (client.cfg) looks like this: ############################################## # Sample client-side OpenVPN 2.0 config file # # for connecting to multi-client server. # # # # This configuration can be used by multiple # # clients, however each client should have # # its own cert and key files. # # # # On Windows, you might want to rename this # # file so it has a .ovpn extension # ############################################## # Specify that we are a client and that we # will be pulling certain config file directives # from the server. client auth-user-pass #management-query-passwords #management-hold # Disable management port for debugging port issues #management 127.0.0.1 13010 ping 5 ping-exit 30 # Use the same setting as you are using on # the server. # On most systems, the VPN will not function # unless you partially or fully disable # the firewall for the TUN/TAP interface. #;dev tap dev tun # Windows needs the TAP-Win32 adapter name # from the Network Connections panel # if you have more than one. On XP SP2, # you may need to disable the firewall # for the TAP adapter. ;dev-node MyTap # Are we connecting to a TCP or # UDP server? Use the same setting as # on the server. proto tcp ;proto udp # The hostname/IP and port of the server. # You can have multiple remote entries # to load balance between the servers. # All VPN Servers are added at the very end ;remote my-server-2 1194 # Choose a random host from the remote # list for load-balancing. Otherwise # try hosts in the order specified. # We order the hosts according to number of connections. # So no need to randomize the list # remote-random # Keep trying indefinitely to resolve the # host name of the OpenVPN server. Very useful # on machines which are not permanently connected # to the internet such as laptops. resolv-retry infinite # Most clients don't need to bind to # a specific local port number. nobind # Downgrade privileges after initialization (non-Windows only) ;user nobody ;group nobody # Try to preserve some state across restarts. persist-key persist-tun # If you are connecting through an # HTTP proxy to reach the actual OpenVPN # server, put the proxy server/IP and # port number here. See the man page # if your proxy server requires # authentication. ;http-proxy-retry # retry on connection failures ;http-proxy [proxy server] [proxy port #] # Wireless networks often produce a lot # of duplicate packets. Set this flag # to silence duplicate packet warnings. ;mute-replay-warnings # SSL/TLS parms. # See the server config file for more # description. It's best to use # a separate .crt/.key file pair # for each client. A single ca # file can be used for all clients. ca ./keys/ca.crt cert ./keys/hmauser.crt key ./keys/hmauser.key # Verify server certificate by checking # that the certicate has the nsCertType # field set to "server". This is an # important precaution to protect against # a potential attack discussed here: # http://openvpn.net/howto.html#mitm # # To use this feature, you will need to generate # your server certificates with the nsCertType # field set to "server". The build-key-server # script in the easy-rsa folder will do this. ;ns-cert-type server # If a tls-auth key is used on the server # then every client must also have the key. ;tls-auth ta.key 1 # Select a cryptographic cipher. # If the cipher option is used on the server # then you must also specify it here. ;cipher x # Enable compression on the VPN link. # Don't enable this unless it is also # enabled in the server config file. #comp-lzo # Set log file verbosity. verb 3 # Silence repeating messages ;mute 20 # Detect proxy auto matically #auto-proxy # Need this for Vista connection issue route-metric 1 # Get rid of the cached password warning #auth-nocache #show-net-up #dhcp-renew #dhcp-release #route-delay 0 120 # added to prevent MITM attack ns-cert-type server # # Remote servers added dynamically by the master server # DO NOT CHANGE below this line # remote-random remote 173.242.116.200 443 # 0 remote 38.121.77.74 443 # 0 # etc... remote 67.23.177.5 443 # 0 remote 46.19.136.130 443 # 0 remote 173.254.207.2 443 # 0 # END

  Read the article

• Why would Linux VM in vSphere ESXi 5.5 show dramatically increased disk i/o latency?

  - by mhucka

  I'm stumped and I hope someone else will recognize the symptoms of this problem. Hardware: new Dell T110 II, dual-core Pentium G860 2.9 GHz, onboard SATA controller, one new 500 GB 7200 RPM cabled hard drive inside the box, other drives inside but not mounted yet. No RAID. Software: fresh CentOS 6.5 virtual machine under VMware ESXi 5.5.0 (build 174 + vSphere Client). 2.5 GB RAM allocated. The disk is how CentOS offered to set it up, namely as a volume inside an LVM Volume Group, except that I skipped having a separate /home and simply have / and /boot. CentOS is patched up, ESXi patched up, latest VMware tools installed in the VM. No users on the system, no services running, no files on the disk but the OS installation. I'm interacting with the VM via the VM virtual console in vSphere Client. Before going further, I wanted to check that I configured things more or less reasonably. I ran the following command as root in a shell on the VM: for i in 1 2 3 4 5 6 7 8 9 10; do dd if=/dev/zero of=/test.img bs=8k count=256k conv=fdatasync done I.e., just repeat the dd command 10 times, which results in printing the transfer rate each time. The results are disturbing. It starts off well: 262144+0 records in 262144+0 records out 2147483648 bytes (2.1 GB) copied, 20.451 s, 105 MB/s 262144+0 records in 262144+0 records out 2147483648 bytes (2.1 GB) copied, 20.4202 s, 105 MB/s ... but after 7-8 of these, it then prints 262144+0 records in 262144+0 records out 2147483648 bytes (2.1 GG) copied, 82.9779 s, 25.9 MB/s 262144+0 records in 262144+0 records out 2147483648 bytes (2.1 GB) copied, 84.0396 s, 25.6 MB/s 262144+0 records in 262144+0 records out 2147483648 bytes (2.1 GB) copied, 103.42 s, 20.8 MB/s If I wait a significant amount of time, say 30-45 minutes, and run it again, it again goes back to 105 MB/s, and after several rounds (sometimes a few, sometimes 10+), it drops to ~20-25 MB/s again. Plotting the disk latency in vSphere's interface, it shows periods of high disk latency hitting 1.2-1.5 seconds during the times that dd reports the low throughput. (And yes, things get pretty unresponsive while that's happening.) What could be causing this? I'm comfortable that it is not due to the disk failing, because I also had configured two other disks as an additional volume in the same system. At first I thought I did something wrong with that volume, but after commenting the volume out from /etc/fstab and rebooting, and trying the tests on / as shown above, it became clear that the problem is elsewhere. It is probably an ESXi configuration problem, but I'm not very experienced with ESXi. It's probably something stupid, but after trying to figure this out for many hours over multiple days, I can't find the problem, so I hope someone can point me in the right direction. (P.S.: yes, I know this hardware combo won't win any speed awards as a server, and I have reasons for using this low-end hardware and running a single VM, but I think that's besides the point for this question [unless it's actually a hardware problem].) ADDENDUM #1: Reading other answers such as this one made me try adding oflag=direct to dd. However, it makes no difference in the pattern of results: initially the numbers are higher for many rounds, then they drop to 20-25 MB/s. (The initial absolute numbers are in the 50 MB/s range.) ADDENDUM #2: Adding sync ; echo 3 > /proc/sys/vm/drop_caches into the loop does not make a difference at all. ADDENDUM #3: To take out further variables, I now run dd such that the file it creates is larger than the amount of RAM on the system. The new command is dd if=/dev/zero of=/test.img bs=16k count=256k conv=fdatasync oflag=direct. Initial throughput numbers with this version of the command are ~50 MB/s. They drop to 20-25 MB/s when things go south. ADDENDUM #4: Here is the output of iostat -d -m -x 1 running in another terminal window while performance is "good" and then again when it's "bad". (While this is going on, I'm running dd if=/dev/zero of=/test.img bs=16k count=256k conv=fdatasync oflag=direct.) First, when things are "good", it shows this: When things go "bad", iostat -d -m -x 1 shows this:

  Read the article

• Android: ActivityThread.performLaunchActivity error

  - by fordays

  Hi, I'm getting an ActivityThread.performLaunchActivity(ActivityThread$ActivityRecord,Intent) error each time I boot up my program in the debugger. The program won't even start up! Any help would be greatly appreciated! I'm very new to this environment. Let me know if you need anymore information/code to help me out. Here is my logcat: 06-09 11:16:26.848: ERROR/vold(27): Error opening switch name path '/sys/class/switch/test2' (No such file or directory) 06-09 11:16:26.848: ERROR/vold(27): Error bootstrapping switch '/sys/class/switch/test2' (No such file or directory) 06-09 11:16:26.848: ERROR/vold(27): Error opening switch name path '/sys/class/switch/test' (No such file or directory) 06-09 11:16:26.848: ERROR/vold(27): Error bootstrapping switch '/sys/class/switch/test' (No such file or directory) 06-09 11:16:37.887: ERROR/MemoryHeapBase(53): error opening /dev/pmem: No such file or directory 06-09 11:16:37.887: ERROR/SurfaceFlinger(53): Couldn't open /sys/power/wait_for_fb_sleep or /sys/power/wait_for_fb_wake 06-09 11:16:37.927: ERROR/libEGL(53): couldn't load <libhgl.so> library (Cannot load library: load_library[984]: Library 'libhgl.so' not found) 06-09 11:16:38.407: ERROR/libEGL(64): couldn't load <libhgl.so> library (Cannot load library: load_library[984]: Library 'libhgl.so' not found) 06-09 11:16:41.358: ERROR/BatteryService(53): Could not open '/sys/class/power_supply/usb/online' 06-09 11:16:41.367: ERROR/BatteryService(53): Could not open '/sys/class/power_supply/battery/batt_vol' 06-09 11:16:41.367: ERROR/BatteryService(53): Could not open '/sys/class/power_supply/battery/batt_temp' 06-09 11:16:41.667: ERROR/EventHub(53): could not get driver version for /dev/input/mouse0, Not a typewriter 06-09 11:16:41.667: ERROR/EventHub(53): could not get driver version for /dev/input/mice, Not a typewriter 06-09 11:16:41.797: ERROR/System(53): Failure starting core service 06-09 11:16:41.797: ERROR/System(53): java.lang.SecurityException 06-09 11:16:41.797: ERROR/System(53): at android.os.BinderProxy.transact(Native Method) 06-09 11:16:41.797: ERROR/System(53): at android.os.ServiceManagerProxy.addService(ServiceManagerNative.java:146) 06-09 11:16:41.797: ERROR/System(53): at android.os.ServiceManager.addService(ServiceManager.java:72) 06-09 11:16:41.797: ERROR/System(53): at com.android.server.ServerThread.run(SystemServer.java:162) 06-09 11:16:41.797: ERROR/AndroidRuntime(53): Crash logging skipped, no checkin service 06-09 11:16:42.777: ERROR/LockPatternKeyguardView(53): Failed to bind to GLS while checking for account 06-09 11:16:46.557: ERROR/ActivityThread(111): Failed to find provider info for com.google.settings 06-09 11:16:46.577: ERROR/ActivityThread(111): Failed to find provider info for com.google.settings 06-09 11:16:49.087: ERROR/ApplicationContext(53): Couldn't create directory for SharedPreferences file shared_prefs/wallpaper-hints.xml 06-09 11:16:51.146: ERROR/ActivityThread(108): Failed to find provider info for android.server.checkin 06-09 11:16:54.266: ERROR/ActivityThread(108): Failed to find provider info for android.server.checkin 06-09 11:16:54.416: ERROR/ActivityThread(108): Failed to find provider info for android.server.checkin 06-09 11:16:56.336: ERROR/MediaPlayerService(31): Couldn't open fd for content://settings/system/notification_sound 06-09 11:16:56.356: ERROR/MediaPlayer(53): Unable to to create media player 06-09 11:16:56.637: ERROR/AndroidRuntime(201): Uncaught handler: thread main exiting due to uncaught exception 06-09 11:16:56.757: ERROR/AndroidRuntime(201): java.lang.RuntimeException: Unable to start activity ComponentInfo{com.svgeeks.kidneytest/com.svgeeks.kidneytest.KidneyTest}: java.lang.ClassCastException: android.widget.EditText 06-09 11:16:56.757: ERROR/AndroidRuntime(201): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2401) 06-09 11:16:56.757: ERROR/AndroidRuntime(201): at android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:2417) 06-09 11:16:56.757: ERROR/AndroidRuntime(201): at android.app.ActivityThread.access$2100(ActivityThread.java:116) 06-09 11:16:56.757: ERROR/AndroidRuntime(201): at android.app.ActivityThread$H.handleMessage(ActivityThread.java:1794) 06-09 11:16:56.757: ERROR/AndroidRuntime(201): at android.os.Handler.dispatchMessage(Handler.java:99) 06-09 11:16:56.757: ERROR/AndroidRuntime(201): at android.os.Looper.loop(Looper.java:123) 06-09 11:16:56.757: ERROR/AndroidRuntime(201): at android.app.ActivityThread.main(ActivityThread.java:4203) 06-09 11:16:56.757: ERROR/AndroidRuntime(201): at java.lang.reflect.Method.invokeNative(Native Method) 06-09 11:16:56.757: ERROR/AndroidRuntime(201): at java.lang.reflect.Method.invoke(Method.java:521) 06-09 11:16:56.757: ERROR/AndroidRuntime(201): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:791) 06-09 11:16:56.757: ERROR/AndroidRuntime(201): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:549) 06-09 11:16:56.757: ERROR/AndroidRuntime(201): at dalvik.system.NativeStart.main(Native Method) 06-09 11:16:56.757: ERROR/AndroidRuntime(201): Caused by: java.lang.ClassCastException: android.widget.EditText 06-09 11:16:56.757: ERROR/AndroidRuntime(201): at com.svgeeks.kidneytest.KidneyTest.onCreate(KidneyTest.java:57) 06-09 11:16:56.757: ERROR/AndroidRuntime(201): at android.app.Instrumentation.callActivityOnCreate(Instrumentation.java:1123) 06-09 11:16:56.757: ERROR/AndroidRuntime(201): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2364) 06-09 11:16:56.757: ERROR/AndroidRuntime(201): ... 11 more 06-09 11:16:56.876: ERROR/dalvikvm(201): Unable to open stack trace file '/data/anr/traces.txt': Permission denied

  Read the article

• adobe flash buider (flex4): Error #2025 or Error: addChild() is not available in this class. Instead

  - by user306584

  Hi, I'm a complete newbie to Flex, so apologies for my dumbness. I've searched for an answer but haven't found anything that seems to be doing the trick. What I'm trying to do: port this example http://www.adobe.com/devnet/air/flex/articles/flex_air_codebase_print.html to Flash Builder 4. All seems to be fine but for one thing. When I use the original code for the Air application <?xml version="1.0" encoding="utf-8"?> <s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009" xmlns:s="library://ns.adobe.com/flex/spark" xmlns:mx="library://ns.adobe.com/flex/mx" creationComplete="onApplicationComplete()"> <fx:Script> <![CDATA[ private static const neededForCompilation:AirGeneralImplementation = null; private function onApplicationComplete():void { var can:MainCanvas = new MainCanvas(); this.addChild(can); can.labelMessage = "Loaded in an AIR Application "; } ]]> </fx:Script> <fx:Declarations> <!-- Place non-visual elements (e.g., services, value objects) here --> </fx:Declarations> </s:WindowedApplication> I get this run time error Error: addChild() is not available in this class. Instead, use addElement() or modify the skin, if you have one. at spark.components.supportClasses::SkinnableComponent/addChild()[E:\dev\4.0.0\frameworks\projects\spark\src\spark\components\supportClasses\SkinnableComponent.as:1038] If I substitute the code with this.addElement(can); Everything loads well but the first time I try to press any of the buttons on the main canvas I get the following run time error ArgumentError: Error #2025: The supplied DisplayObject must be a child of the caller. at flash.display::DisplayObjectContainer/getChildIndex() at mx.managers::SystemManager/getChildIndex()[E:\dev\4.0.0\frameworks\projects\framework\src\mx\managers\SystemManager.as:1665] at mx.managers.systemClasses::ActiveWindowManager/mouseDownHandler()[E:\dev\4.0.0\frameworks\projects\framework\src\mx\managers\systemClasses\ActiveWindowManager.as:437] here's the super simple code for the main canvas <?xml version="1.0" encoding="utf-8"?> <s:Application xmlns:fx="http://ns.adobe.com/mxml/2009" xmlns:s="library://ns.adobe.com/flex/spark" xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600" creationComplete="init();"> <fx:Declarations> <!-- Place non-visual elements (e.g., services, value objects) here --> </fx:Declarations> <fx:Script source="main.as" /> <mx:Label id="lblMessage" text="The UI from the shared Flex app BothCode" x="433" y="112"/> <s:Button x="433" y="141" click="saveFile();" label="Save File"/> <s:Button x="601" y="141" click="GeneralFactory.getGeneralInstance().airOnlyFunctionality();" label="Air Only"/> </s:Application> Any help would be immensely appreciated. And any pointers to how to setup a project that can compile in both Air and Flash while sharing the same code, all for Flex 4, would also be immensely appreciated. thank you!

  Read the article

• Flex 4, chart, Error 1009

  - by Stephane

  Hello, I am new to flex development and I am stuck with this error TypeError: Error #1009: Cannot access a property or method of a null object reference. at mx.charts.series::LineSeries/findDataPoints()[E:\dev\4.0.0\frameworks\projects\datavisualization\src\mx\charts\series\LineSeries.as:1460] at mx.charts.chartClasses::ChartBase/findDataPoints()[E:\dev\4.0.0\frameworks\projects\datavisualization\src\mx\charts\chartClasses\ChartBase.as:2202] at mx.charts.chartClasses::ChartBase/mouseMoveHandler()[E:\dev\4.0.0\frameworks\projects\datavisualization\src\mx\charts\chartClasses\ChartBase.as:4882] I try to create a chart where I can move the points with the mouse I notice that the error doesn't occur if I move the point very slowly I have try to use the debugger and pint some debug every where without success All the behaviours were ok until I had the modifyData Please let me know if you have some experience with this kind of error I will appreciate any help. Is it also possible to remove the error throwing because after that the error occur if I click the dismiss all error button then the component work great there is the simple code of the chart <fx:Declarations> </fx:Declarations> <fx:Script> <![CDATA[ import mx.charts.HitData; import mx.charts.events.ChartEvent; import mx.charts.events.ChartItemEvent; import mx.collections.ArrayCollection; [Bindable] private var selectItem:Object; [Bindable] private var chartMouseY:int; [Bindable] private var hitData:Boolean=false; [Bindable] private var profitPeriods:ArrayCollection = new ArrayCollection( [ { period: "Qtr1 2006", profit: 32 }, { period: "Qtr2 2006", profit: 47 }, { period: "Qtr3 2006", profit: 62 }, { period: "Qtr4 2006", profit: 35 }, { period: "Qtr1 2007", profit: 25 }, { period: "Qtr2 2007", profit: 55 } ]); public function chartMouseUp(e:MouseEvent):void{ if(hitData){ hitData = false; } } private function chartMouseMove(e:MouseEvent):void { if(hitData){ var p:Point = new Point(linechart.mouseX,linechart.mouseY); var d:Array = linechart.localToData(p); chartMouseY=d[1]; modifyData(); } } public function modifyData():void { var idx:int = profitPeriods.getItemIndex(selectItem); var item:Object = profitPeriods.getItemAt(idx); item.profit = chartMouseY; profitPeriods.setItemAt(item,idx); } public function chartMouseDown(e:MouseEvent):void{ if(!hitData){ var hda:Array = linechart.findDataPoints(e.currentTarget.mouseX, e.currentTarget.mouseY); if (hda[0]) { selectItem = hda[0].item; hitData = true; } } } ]]> </fx:Script> <s:layout> <s:HorizontalLayout horizontalAlign="center" verticalAlign="middle" /> </s:layout> <s:Panel title="LineChart Control" > <s:VGroup > <s:HGroup> <mx:LineChart id="linechart" color="0x323232" height="500" width="377" mouseDown="chartMouseDown(event)" mouseMove="chartMouseMove(event)" mouseUp="chartMouseUp(event)" showDataTips="true" dataProvider="{profitPeriods}" > <mx:horizontalAxis> <mx:CategoryAxis categoryField="period"/> </mx:horizontalAxis> <mx:series> <mx:LineSeries yField="profit" form="segment" displayName="Profit"/> </mx:series> </mx:LineChart> <mx:Legend dataProvider="{linechart}" color="0x323232"/> </s:HGroup> <mx:Form> <mx:TextArea id="DEBUG" height="200" width="300"/> </mx:Form> </s:VGroup> </s:Panel> UPDATE 30/2010 : the null object is _renderData.filteredCache from the chartline the code call before error is the default mouseMoveHandler of chartBase to chartline. Is it possible to remove it ? or provide a filteredCache

  Read the article

• Doctrine Build-All Task fails in NetBeans - Class not found! Fatal Error: call to evictAll()

  - by Prasad

  When I build my model with the symfony doctrine:build --all --and-load command I have made no major changes to the model/schema, this is something new. I also tried sub-commands like build-model, build-tables, but they all hang.. I'm trying this in net beans. Any clue what this is? This command will remove all data in the following "dev" connection(s): - doctrine Are you sure you want to proceed? (y/N) y >> doctrine Dropping "doctrine" database >> doctrine Creating "dev" environment "doctrine" database >> doctrine generating model classes >> file+ C:\Documents and Settings\Gupte...\Temp/doctrine_schema_69845.yml >> tokens D:/projects/cim/lib/model/doctrine/base/BaseAffiliate.class.php >> tokens D:/projects/cim/lib/model/doctrine/base/BaseContact.class.php >> tokens D:/projects/cim/lib/model/doctr...e/BaseContactLocation.class.php >> tokens D:/projects/cim/lib/model/doctr...se/BaseGroupAffiliate.class.php >> tokens D:/projects/cim/lib/model/doctrine/base/BaseGrouping.class.php >> tokens D:/projects/cim/lib/model/doctrine/base/BaseLocation.class.php >> tokens D:/projects/cim/lib/model/doctr.../base/BasePhonenumber.class.php >> tokens D:/projects/cim/lib/model/doctrine/base/BaseTenant.class.php >> tokens D:/projects/cim/lib/model/doctr...base/BasesfGuardGroup.class.php >> tokens D:/projects/cim/lib/model/doctr...fGuardGroupPermission.class.php >> tokens D:/projects/cim/lib/model/doctr...BasesfGuardPermission.class.php >> tokens D:/projects/cim/lib/model/doctr...asesfGuardRememberKey.class.php >> tokens D:/projects/cim/lib/model/doctr.../base/BasesfGuardUser.class.php >> tokens D:/projects/cim/lib/model/doctr.../BasesfGuardUserGroup.class.php >> tokens D:/projects/cim/lib/model/doctr...sfGuardUserPermission.class.php >> autoload Resetting application autoloaders >> file- D:/projects/cim/cache/frontend/.../config/config_autoload.yml.php >> file- D:/projects/cim/cache/backend/dev/config/config_autoload.yml.php >> doctrine generating form classes [?php /** * Contact form base class. * * @method Contact getObject() Returns the current form's model object * * @package ##PROJECT_NAME## * @subpackage form * @author ##AUTHOR_NAME## * @version SVN: $Id: sfDoctrineFormGeneratedTemplate.php 24171 2009-11-19 16:37:50Z Kris.Wallsmith $ */ abstract class BaseContactForm extends BaseFormDoctrine { public function setup() { $this->setWidgets(array( 'id' Fatal error: Call to a member function evictAll() on a non-object in D:\projects\cim\lib\vendor\symfony\lib\plugins\sfDoctrinePlugin\lib\vendor\doctrine\Doctrine\Connection.php on line 1239 Call Stack: 0.9552 322760 1. {main}() D:\projects\cim\symfony:0 0.9594 587208 2. include('D:\projects\cim\lib\vendor\symfony\lib\command\cli.php') D:\projects\cim\symfony:14 11.9775 17118936 3. sfDatabaseManager->shutdown() D:\projects\cim\lib\vendor\symfony\lib\database\sfDatabaseManager.class.php:0 11.9775 17118936 4. sfDoctrineDatabase->shutdown() D:\projects\cim\lib\vendor\symfony\lib\database\sfDatabaseManager.class.php:134 11.9775 17118936 5. Doctrine_Manager->closeConnection() D:\projects\cim\lib\vendor\symfony\lib\plugins\sfDoctrinePlugin\lib\database\sfDoctrineDatabase.class.php:165 11.9775 17118936 6. Doctrine_Connection->close() D:\projects\cim\lib\vendor\symfony\lib\plugins\sfDoctrinePlugin\lib\vendor\doctrine\Doctrine\Manager.php:579 11.9776 17120160 7. Doctrine_Connection->clear() D:\projects\cim\lib\vendor\symfony\lib\plugins\sfDoctrinePlugin\lib\vendor\doctrine\Doctrine\Connection.php:1268 Couldn't find class Similar thing is mentioned here: http://osdir.com/ml/symfony-users/2010-01/msg00642.html

  Read the article

• Django ImageField issue with JPEG's

  - by Kieran Lynn

  I am having a major issue with PIL (Python Image Library) in Django and have jumpped through a lot of hoops and have thus far not been able to figure out what the root of the issue is. The problem essentially breaks down to not being able to upload JPEG images through the ImageField in the Django admin. But the issue is not as simple as installing libjpeg. First, I installed PIL (through Buildout) and realized once it was installed that I had not installed libjpeg because JPEG support was not available. Having not setup the server myself, I just assumed that it was not installed and I compiled libjpeg 8 from the source. This ended up in my /usr/local/lib/ directory. I cleared out my Buildout files and rebuilt everything. This time when PIL compiled I had JPEG support. But I went to the Django Admin and tried to upload a JPEG though an ImageField with no luck. I got the "Upload a valid image. The file you uploaded was either not an image or a corrupted image" error. Just as a test I opened up a the Djano shell and ran the following: > import Image > i = Image.open( "/absolute_path/file.jpg" ) > print i <JpegImagePlugin.JpegImageFile image mode=RGB size=940x375 at 0x7F908C529BD8> This runs with no errors and shows that PIL is able to open JPEG's. After doing some reading, I come across this thread: Is it possible to control which libraries apache uses? Looks like PHP also uses libjpeg and is loading before Django, and therefor loading libjpeg 6.2 before. This is show when using lsof: COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME apache2 2561 www-data mem REG 202,1 146032 639276 /usr/lib/libjpeg.so.62.0.0 So my thought is that I should be using libjpeg 6.2. So I removed libjpeg located in my /usr/local/lib directory. After rereading the PIL installation instructions, I realized that I might not have the dev/header files for libjpeg that PIL needs. So I also uninstalled libjpeg using the aptitude uninstaller (sudo aptitude remove libjpeg62). Then to ensure that I got the header files that PIL needed I installed libjpeg using aptitude: (sudo aptget install libjpeg62-dev). From here I cleaned out my Buildout directory, and reran Buildout, which in turn reinstalled PIL. Once again, I have JPEG support, now using the libjpeg62. So I go to test in the Django Admin. Still no JPEG support. So I wanted to test JPEG support in general and see if the exception was not handled, what kind of error it would throw. So in my homepage view I added the following code to open a JPEG image: import Image i = Image.open( "/absolute_path/file.jpg" ) v = i.verify() Then I pass i to the HTML view just to easily see the output. I deploy these changes to the server and restart. I am surprised not to see an error and get the following output: {{ i }} - <JpegImagePlugin.JpegImageFile image mode=RGB size=940x375 at 0x7F908C529BD8> {{ v }} - None So at this point I am really confused: Why can I successfully open a JPEG while the admin cannot? Am I missing something, is this not an issue with libjpeg? If not an issue with libjpeg, why can I upload a PNG with no issues? Any help would be much appreciated, I have been on this for 2 days debugging with no luck. Setup: 1. Rackspace Cloud Server 2. Ubuntu 10.04 3. Django 1.2.3 (Installed though Buildout) 4. PIL 1.1.7 (Installed though Buildout) 5. libjpeg 6.2 (installed through aptitude (sudo aptget install libjpeg62-dev)

  Read the article

• C# SQLite file import prevent duplicates

  - by jakesankey

  Hi, I am attempting to get a directory (which is ever-growing) full of .txt comma delimited files to import into my SQLite db. I now have all of the files importing ok, however I need to have some way of excluding the files that have been previously added to db. I have a column in the db called FileName where the name and extension are stored next to each record from each file. Now I need to say 'If the code finds XXX.txt and XXX.txt is already in db, then skip this file'. Can I somehow add this logic to the getfiles command or is there another easy way? using (SQLiteCommand insertCommand = con.CreateCommand()) { SQLiteCommand cmdd = con.CreateCommand(); string[] files = Directory.GetFiles(@"C:\Documents and Settings\js91162\Desktop\", "R303717*.txt*", SearchOption.AllDirectories); foreach (string file in files) { string FileNameExt1 = Path.GetFileName(file); cmdd.CommandText = @" SELECT COUNT(*) FROM Import WHERE FileName = @FileExt;"; cmdd.Parameters.Add(new SQLiteParameter("@FileExt", FileNameExt1)); int count = Convert.ToInt32(cmdd.ExecuteScalar()); //int count = ((IConvertible)insertCommand.ExecuteScalar().ToInt32(null)); if (count == 0) { Console.WriteLine("Parsing CMM data for SQL database... Please wait."); insertCommand.CommandText = @" INSERT INTO Import (FeatType, FeatName, Value, Actual, Nominal, Dev, TolMin, TolPlus, OutOfTol, PartNumber, CMMNumber, Date, FileName) VALUES (@FeatType, @FeatName, @Value, @Actual, @Nominal, @Dev, @TolMin, @TolPlus, @OutOfTol, @PartNumber, @CMMNumber, @Date, @FileName);"; insertCommand.Parameters.Add(new SQLiteParameter("@FeatType", DbType.String)); insertCommand.Parameters.Add(new SQLiteParameter("@FeatName", DbType.String)); insertCommand.Parameters.Add(new SQLiteParameter("@Value", DbType.String)); insertCommand.Parameters.Add(new SQLiteParameter("@Actual", DbType.Decimal)); insertCommand.Parameters.Add(new SQLiteParameter("@Nominal", DbType.Decimal)); insertCommand.Parameters.Add(new SQLiteParameter("@Dev", DbType.Decimal)); insertCommand.Parameters.Add(new SQLiteParameter("@TolMin", DbType.Decimal)); insertCommand.Parameters.Add(new SQLiteParameter("@TolPlus", DbType.Decimal)); insertCommand.Parameters.Add(new SQLiteParameter("@OutOfTol", DbType.Decimal)); insertCommand.Parameters.Add(new SQLiteParameter("@Comment", DbType.String)); string FileNameExt = Path.GetFileName(file); string RNumber = Path.GetFileNameWithoutExtension(file); string RNumberE = RNumber.Split('_')[0]; string RNumberD = RNumber.Split('_')[1]; string RNumberDate = RNumber.Split('_')[2]; DateTime dateTime = DateTime.ParseExact(RNumberDate, "yyyyMMdd", Thread.CurrentThread.CurrentCulture); string cmmDate = dateTime.ToString("dd-MMM-yyyy"); string[] lines = File.ReadAllLines(file); bool parse = false; foreach (string tmpLine in lines) { string line = tmpLine.Trim(); if (!parse && line.StartsWith("Feat. Type,")) { parse = true; continue; } if (!parse || string.IsNullOrEmpty(line)) { continue; } Console.WriteLine(tmpLine); foreach (SQLiteParameter parameter in insertCommand.Parameters) { parameter.Value = null; } string[] values = line.Split(new[] { ',' }); for (int i = 0; i < values.Length - 1; i++) { SQLiteParameter param = insertCommand.Parameters[i]; if (param.DbType == DbType.Decimal) { decimal value; param.Value = decimal.TryParse(values[i], out value) ? value : 0; } else { param.Value = values[i]; } } insertCommand.Parameters.Add(new SQLiteParameter("@PartNumber", RNumberE)); insertCommand.Parameters.Add(new SQLiteParameter("@CMMNumber", RNumberD)); insertCommand.Parameters.Add(new SQLiteParameter("@Date", cmmDate)); insertCommand.Parameters.Add(new SQLiteParameter("@FileName", FileNameExt)); // insertCommand.ExecuteNonQuery(); } } } Console.WriteLine("CMM data successfully imported to SQL database..."); } con.Close(); }

  Read the article

• Unit testing authorization in a Pylons app fails; cookies aren't been correctly set or recorded

  - by Ian Stevens

  I'm having an issue running unit tests for authorization in a Pylons app. It appears as though certain cookies set in the test case may not be correctly written or parsed. Cookies work fine when hitting the app with a browser. Here is my test case inside a paste-generated TestController: def test_good_login(self): r = self.app.post('/dologin', params={'login': self.user['username'], 'password': self.password}) r = r.follow() # Should only be one redirect to root assert 'http://localhost/' == r.request.url assert 'Dashboard' in r This is supposed to test that a login of an existing account forwards the user to the dashboard page. Instead, what happens is that the user is redirected back to the login. The first POST works, sets the user in the session and returns cookies. Although those cookies are sent in the follow request, they don't seem to be correctly parsed. I start by setting a breakpoint at the beginning of the above method and see what the login response returns: > nosetests --pdb --pdb-failure -s foo.tests.functional.test_account:TestMainController.test_good_login Running setup_config() from foo.websetup > /Users/istevens/dev/foo/foo/tests/functional/test_account.py(33)test_good_login() -> r = self.app.post('/dologin', params={'login': self.user['username'], 'password': self.password}) (Pdb) n > /Users/istevens/dev/foo/foo/tests/functional/test_account.py(34)test_good_login() -> r = r.follow() # Should only be one redirect to root (Pdb) p r.cookies_set {'auth_tkt': '"4c898eb72f7ad38551eb11e1936303374bd871934bd871833d19ad8a79000000!"'} (Pdb) p r.request.environ['REMOTE_USER'] '4bd871833d19ad8a79000000' (Pdb) p r.headers['Location'] 'http://localhost/?__logins=0' A session appears to be created and a cookie sent back. The browser is redirected to the root, not the login, which also indicates a successful login. If I step past the follow(), I get: > /Users/istevens/dev/foo/foo/tests/functional/test_account.py(35)test_good_login() -> assert 'http://localhost/' == r.request.url (Pdb) p r.request.headers {'Host': 'localhost:80', 'Cookie': 'auth_tkt=""\\"4c898eb72f7ad38551eb11e1936303374bd871934bd871833d19ad8a79000000!\\"""; '} (Pdb) p r.request.environ['REMOTE_USER'] *** KeyError: KeyError('REMOTE_USER',) (Pdb) p r.request.environ['HTTP_COOKIE'] 'auth_tkt=""\\"4c898eb72f7ad38551eb11e1936303374bd871934bd871833d19ad8a79000000!\\"""; ' (Pdb) p r.request.cookies {'auth_tkt': ''} (Pdb) p r <302 Found text/html location: http://localhost/login?__logins=1&came_from=http%3A%2F%2Flocalhost%2F body='302 Found...y. '/149> This indicates to me that the cookie was passed in on the request, although with dubious escaping. The environ appears to be without the session created on the prior request. The cookie has been copied to the environ from the headers, but the cookies in the request seems incorrectly set. Lastly, the user is redirected to the login page, indicating that the user isn't logged in. Authorization in the app is done via repoze.who and repoze.who.plugins.ldap with repoze.who_friendlyform performing the challenge. I'm using the stock tests.TestController created by paste: class TestController(TestCase): def __init__(self, *args, **kwargs): if pylons.test.pylonsapp: wsgiapp = pylons.test.pylonsapp else: wsgiapp = loadapp('config:%s' % config['__file__']) self.app = TestApp(wsgiapp) url._push_object(URLGenerator(config['routes.map'], environ)) TestCase.__init__(self, *args, **kwargs) That's a webtest.TestApp, by the way. The encoding of the cookie is done in webtest.TestApp using Cookie: >>> from Cookie import _quote >>> _quote('"84533cf9f661f97239208fb844a09a6d4bd8552d4bd8550c3d19ad8339000000!"') '"\\"84533cf9f661f97239208fb844a09a6d4bd8552d4bd8550c3d19ad8339000000!\\""' I trust that that's correct. My guess is that something on the response side is incorrectly parsing the cookie data into cookies in the server-side request. But what? Any ideas?

  Read the article

• How to reduce virtual memory by optimising my PHP code?

  - by iCeR

  My current code (see below) uses 147MB of virtual memory! My provider has allocated 100MB by default and the process is killed once run, causing an internal error. The code is utilising curl multi and must be able to loop with more than 150 iterations whilst still minimizing the virtual memory. The code below is only set at 150 iterations and still causes the internal server error. At 90 iterations the issue does not occur. How can I adjust my code to lower the resource use / virtual memory? Thanks! <?php function udate($format, $utimestamp = null) { if ($utimestamp === null) $utimestamp = microtime(true); $timestamp = floor($utimestamp); $milliseconds = round(($utimestamp - $timestamp) * 1000); return date(preg_replace('`(?<!\\\\)u`', $milliseconds, $format), $timestamp); } $url = 'https://www.testdomain.com/'; $curl_arr = array(); $master = curl_multi_init(); for($i=0; $i<150; $i++) { $curl_arr[$i] = curl_init(); curl_setopt($curl_arr[$i], CURLOPT_URL, $url); curl_setopt($curl_arr[$i], CURLOPT_RETURNTRANSFER, 1); curl_setopt($curl_arr[$i], CURLOPT_SSL_VERIFYHOST, FALSE); curl_setopt($curl_arr[$i], CURLOPT_SSL_VERIFYPEER, FALSE); curl_multi_add_handle($master, $curl_arr[$i]); } do { curl_multi_exec($master,$running); } while($running > 0); for($i=0; $i<150; $i++) { $results = curl_multi_getcontent ($curl_arr[$i]); $results = explode("<br>", $results); echo $results[0]; echo "<br>"; echo $results[1]; echo "<br>"; echo udate('H:i:s:u'); echo "<br><br>"; usleep(100000); } ?> Processor Information Total processors: 8 Processor #1 Vendor GenuineIntel Name Intel(R) Xeon(R) CPU E5405 @ 2.00GHz Speed 1995.120 MHz Cache 6144 KB Processor #2 Vendor GenuineIntel Name Intel(R) Xeon(R) CPU E5405 @ 2.00GHz Speed 1995.120 MHz Cache 6144 KB Processor #3 Vendor GenuineIntel Name Intel(R) Xeon(R) CPU E5405 @ 2.00GHz Speed 1995.120 MHz Cache 6144 KB Processor #4 Vendor GenuineIntel Name Intel(R) Xeon(R) CPU E5405 @ 2.00GHz Speed 1995.120 MHz Cache 6144 KB Processor #5 Vendor GenuineIntel Name Intel(R) Xeon(R) CPU E5405 @ 2.00GHz Speed 1995.120 MHz Cache 6144 KB Processor #6 Vendor GenuineIntel Name Intel(R) Xeon(R) CPU E5405 @ 2.00GHz Speed 1995.120 MHz Cache 6144 KB Processor #7 Vendor GenuineIntel Name Intel(R) Xeon(R) CPU E5405 @ 2.00GHz Speed 1995.120 MHz Cache 6144 KB Processor #8 Vendor GenuineIntel Name Intel(R) Xeon(R) CPU E5405 @ 2.00GHz Speed 1995.120 MHz Cache 6144 KB Memory Information Memory for crash kernel (0x0 to 0x0) notwithin permissible range Memory: 8302344k/9175040k available (2176k kernel code, 80272k reserved, 901k data, 228k init, 7466304k highmem) System Information Linux server3.server.com 2.6.18-194.17.1.el5PAE #1 SMP Wed Sep 29 13:31:51 EDT 2010 i686 i686 i386 GNU/Linux Physical Disks SCSI device sda: 1952448512 512-byte hdwr sectors (999654 MB) sda: Write Protect is off sda: Mode Sense: 03 00 00 08 SCSI device sda: drive cache: write back SCSI device sda: 1952448512 512-byte hdwr sectors (999654 MB) sda: Write Protect is off sda: Mode Sense: 03 00 00 08 SCSI device sda: drive cache: write back sd 0:1:0:0: Attached scsi disk sda sd 4:0:0:0: Attached scsi removable disk sdb sd 0:1:0:0: Attached scsi generic sg4 type 0 sd 4:0:0:0: Attached scsi generic sg7 type 0 Current Memory Usage total used free shared buffers cached Mem: 8306672 7847384 459288 0 487912 6444548 -/+ buffers/cache: 914924 7391748 Swap: 4095992 496 4095496 Total: 12402664 7847880 4554784 Current Disk Usage Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol00 898G 307G 546G 36% / /dev/sda1 99M 19M 76M 20% /boot none 4.0G 0 4.0G 0% /dev/shm /var/tmpMnt 4.0G 1.8G 2.0G 48% /tmp

  Read the article

• C++ Serial Port Question

  - by Pfeffer

  Problem: I have a hand held device that scans those graphic color barcodes on all packaging. There is a track device that I can use that will slide the device automatically. This track device functions by taking ascii code through a serial port. I need to get this thing to work in FileMaker on a Mac. So no terminal programs, etc... What I've got so far: I bought a Keyspan USB/Serial adapter. Using a program called ZTerm I was successful in sending commands to the device. Example: "C,7^M^J" I was also able to do the same thing in Terminal using this command: screen /dev/tty.KeySerial1 57600 and then type in the same command above(but when I typed in I just hit Control-M and Control-J for the carriage return and line feed) Now I'm writing a plug-in for FileMaker(in C++ of course). I want to get what I did above happen in C++ so when I install that plug-in in FileMaker I can just call one of those functions and have the whole process take place right there. I'm able to connect to the device, but I can't talk to it. It is not responding to anything. I've tried connecting to the device(successfully) using these: FILE *comport; if ((comport = fopen("/dev/tty.KeySerial1", "w")) == NULL){...} and int fd; fd = open("/dev/tty.KeySerial1", O_RDWR | O_NOCTTY | O_NDELAY); This is what I've tried so far in way of talking to the device: fputs ("C,7^M^J",comport); or fprintf(comport,"C,7^M^J"); or char buffer[] = { 'C' , ',' , '7' , '^' , 'M' , '^' , 'J' }; fwrite (buffer , 1 , sizeof(buffer) , comport ); or fwrite('C,7^M^J', 1, 1, comport); Questions: When I connected to the device from Terminal and using ZTerm, I was able to set my baud rate of 57600. I think that may be why it isn't responding here. But I don't know how to do it here.... Does any one know how to do that? I tried this, but it didn't work: comport->BaudRate = 57600; There are a lot of class solutions out there but they all call these include files like termios.h and stdio.h. I don't have these and, for whatever reason, I can't find them to download. I've downloaded a few examples but there are like 20 files in them and they're all calling other files I can't find(like the ones listed above). Do I need to find these and if so where? I just don't know enough about C++ Is there a website where I can download libraries?? Another solution might be to put those terminal commands in C++. Is there a way to do that? So this has been driving me crazy. I'm not a C++ guy, I only know basic programming concepts. Is anyone out there a C++ expert? I ideally I'd like this to just work using functions I already have, like those fwrite, fputs stuff. Thanks!

  Read the article

• CodePlex Daily Summary for Friday, February 26, 2010

  CodePlex Daily Summary for Friday, February 26, 2010New Projectsaion-gamecp: Aion Gamecp for aion Private server based on Aion UniqueAzure Email Queuer: Azure Email Queuer makes it easier for Developers Programming in the Cloud to Queue Emails to keep the UI Thread Clear for Requests. Developed w...BIG1: Bob and Ian's Game. Written using XNA Game Studio Express. Basically an update of David Braben and Ian Bell's classic game "Elite." This is a nonco...CMS7: CMS7 The CMS7 is composed of three module. (1)Main CMS Business (2)Process Customization (3)Role/Department CustomizationCoreSharp Networking Core: A simple to use framework to develop efficient client/server application. The framework is part of my project at school and I hope it will benefit ...Fullscreen Countdown: Small and basic countdown application. The countdown window can be resized to fit any size to display the minutes elapsed. Developped in C#, .NET F...IRC4N00bz: Learning sockets, events, delegates, SQL, and IRC commands all in one big project! It's written in C# (Csharp) and hope you find it helpfull, or ev...LjSystem: This project is a collection of my extensions to the BCLMP3 Tags Management: A software to manage the tags of MP3 filesnetone: All net in oneNext Dart (Dublin Area Rapid Transport): The shows the times of the next darts from a given station. It is a windows application that updates automatically and so is easier to use than th...PChat - An OCDotNet.Org Presentation: PChat is a multithreaded pinnable chat server and client. It is designed to be a demonstration of Visual Studio 2010 MVC 2, for ocdotnet.org Use...Pittsburgh Code Camp iPhone App: The Pittsburgh Code Camp iPhone Application is meant as a demonstration of the creation of an iPhone application while at the same time providing t...Radical: Radical is an infrastructure frameworkRadioAutomation: Windows application for radio automation.SilverSynth - Digital Audio Synthesis for Silverlight: SilverSynth is a digial audio synthesis library for Silverlight developers to create synthesized wave forms from code. It supports synthesis of sin...SkeinLibManaged: This implementation of the Skein Cryptographic Hash function is written entirely in Managed CSharp. It is posted here to share with the world at l...SpecExplorerEval: We are checking out spec explorer and presenting on its useSPOJemu: This is a SPOJ emulator. It allows you to define tests in xml and then check your application if it's working as you expected.The C# Skype Chat bot: A Skype bot in C# for managing Skype chats.VS 2010 Architecture Layers Patterns: Architecture layers patterns toolbox items for layers diagrams.Yakiimo3D: Mostly DirectX 11 programming tutorials.代码生成器: Project DetailsNew ReleasesArkSwitch: ArkSwitch v1.1.1: This release fixes a crash that occurs when certain processes with multiple primary windows are encountered.BTP Tools: CSB, CUV and HCSB e-Sword files 2010-02-26: include csb.bbl csb+.bbl csb.cmt csbc.dct cuv.bbl cuv+.bbl cuv.cmt cuvc.dct hcsb+.bbl hcsbc.dct files for e-Sword 8.0BubbleBurst: BubbleBurst v1.1: This is the second release of BubbleBurst, the subject of the book Advanced MVVM. This release contains a minor fix that was added after the book ...DevTreks -social budgeting that improves lives and livelihoods: Social Budgeting Web Software, alpha 3b: Alpha 3b simplifies and strengthens state management. With the exception of linked lists, the internal mechanics of addins have not been improved...Dragonrealms PvpStance plugin for Genie: 1.0.0.4: This updated is needed now that the DR server move broke the "profile soandso pvp" syntax. This version will capture the pvp stance out of the full...FastCode: FastCode 1.0: Definitions <integerType> : byte, sbyte, short, ushort, int, uint, long, ulond <floatType> : float, double, decimal Base types extensions Intege...Fullscreen Countdown: Fullscreen Countdown 1.0: First versionIRC4N00bz: IRC4N00bz_02252010.zip: I'm calling it a night. Here's the dll for where I'm at so far. It works, just lakcs some abilities. Anything not included can be pulled from th...Labrado: Labrado MiniTimer: Labrado MiniTimer is a convenient timer tool designed and implemented for GMAT test preparation.LINQ to VFP: LinqToVfp (v1.0.17.1): Cleaned up WCF Data Service Expression Tree. (details...) This build requires IQToolkit v0.17b.Microsoft Health Common User Interface: Release 8.0.200.000: This is version 8.0 of the Microsoft® Health Common User Interface Control Toolkit. The scope and requirements of this release are based on materia...Mini SQL Query: Mini SQL Query Funky Dev Build (RC1+): The "Funk Dev Build" bit is that I added a couple of features I think are pretty cool. It is a "dev" build but I class it as stable. Find Object...Neovolve: Neovolve.BlogEngine.Extensions 1.2: Updated extensions to work with BE 1.6. Updated Snippets extension to better handle excluded tags and fixed regex bug. Added SyntaxHighlighter exte...Neovolve: Neovolve.BlogEngine.Web 1.1: Update to support BE version 1.6 Neovolve.BlogEngine.Web 1.1 contains a redirector module that translates Community Server url formats into BlogEn...Next Dart (Dublin Area Rapid Transport): 1.0: There are 2 files NextDart 1.0.zip This contains just the files. Extract it to a folder and run NextDart.exe. NextDart 1.0 Intaller.zip This c...Powershell4SQL: Version 1.2: Changes from version 1.1 Added additional attributes to simplify syntax. Server and Database become optional. Defaulted to (local) and 'master' ...Radical: Radical (Desktop) 1.0: First stable dropRaidTracker: Raid Tracker: a few tweaksRaiser's Edge API Developer Toolkit: Alpha Release 1: This is an untested, alpha release. Contains RE API Toolkit built using 7.85 Dlls and 7.91 Dlls.SharePoint Enhanced Calendar by ArtfulBits: ArtfulBits.EnhancedCalendar v1.3: New Features: Simple to activate mechanism added (add Enhanced Calendar Web Part on the same page as standard calendar) Support for any type of S...Silverlight 4.0 Com Library for SQL Server Access: Version 1.0: This is the intial alpha release. It includes ExecuteQuery, ExecuteNonQuery and ExecuteScalar routines. See roadmap section of home page for detai...Silverlight HTML 5 Canvas: SLCanvas 1.1: This release enables <canvas renderMethod="auto" onload="runme(this)"></canvas> or <canvas renderMethod="Silverlight" onload="runme(this)"></ca...SilverSynth - Digital Audio Synthesis for Silverlight: SilverSynth 1.0: Source code including demo application.StringDefs: StringDefs Alpha Release 1.01: In this release of the Library few namespaces are added.STSDev 2008: STSDev 2008 2.1: Update to the StsDev 2008 project to correct Manifest Building issues.Text to HTML: 0.4.0.2: Cambios de la versión:Correcciones menores en el sistema de traducción. Controlada la excepción aparecida al suprimir los archivos de idioma. A...The Silverlight Hyper Video Player [http://slhvp.com]: Release 4 - Friendly User Release (Pre-Beta): Release 4 - Friendly User Release (Pre-Beta) This version of the code has much of the design that we plan to go forward with for Mix and utilizes a...TreeSizeNet: TreeSizeNet 0.10.2: - Assemblies merged in one executableVCC: Latest build, v2.1.30225.0: Automatic drop of latest buildVCC: Latest build, v2.1.30225.1: Automatic drop of latest buildVS 2010 Architecture Layers Patterns: VS 2010 RC Architecture Layers Patterns v1.0: Architecture layers patterns toolbox items based on the Microsoft Application Architecture Guide, 2nd Edition for the layer diagram designer of Vi...Yakiimo3D: DirectX11 BitonicSortCPU Source and Binary: DirectX11 BitonicSortCPU sample source and binary.Yakiimo3D: DirectX11 MandelbrotGPU Source and Binary: DirectX11 MandelbrotGPU source and binary.Most Popular ProjectsVSLabOSIS Interop TestsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)ASP.NETMicrosoft SQL Server Community & SamplesMost Active ProjectsDinnerNow.netRawrBlogEngine.NETSLARToolkit - Silverlight Augmented Reality ToolkitInfoServiceSharpMap - Geospatial Application Framework for the CLRCommon Context AdaptersNB_Store - Free DotNetNuke Ecommerce Catalog ModulejQuery Library for SharePoint Web Servicespatterns & practices – Enterprise Library

  Read the article

• Exam 70-480 Study Material: Programming in HTML5 with JavaScript and CSS3

  - by Stacy Vicknair

  Here’s a list of sources of information for the different elements that comprise the 70-480 exam: General Resources http://www.w3schools.com (As pointed out in David Pallmann’s blog some of this content is unverified, but it is a decent source of information. For more about when it isn’t decent, see http://www.w3fools.com ) http://www.bloggedbychris.com/2012/09/19/microsoft-exam-70-480-study-guide/ (A guy who did a lot of what I did already, sadly I found this halfway through finishing my resources list. This list is expertly put together so I would recommend checking it out.) http://davidpallmann.blogspot.com/2012/08/microsoft-certification-exam-70-480.html http://pluralsight.com/training/Courses (Yes, this isn’t free, but if you look at the course listing there is an entire section on HTML5, CSS3 and Javascript. You can always try the trial!)   Some of the links I put below will overlap with the other resources above, but I tried to find explanations that looked beneficial to me on links outside those already mentioned.   Test Breakdown Implement and Manipulate Document Structures and Objects (24%) Create the document structure. o This objective may include but is not limited to: structure the UI by using semantic markup, including for search engines and screen readers (Section, Article, Nav, Header, Footer, and Aside); create a layout container in HTML http://www.w3schools.com/html/html5_new_elements.asp   Write code that interacts with UI controls. o This objective may include but is not limited to: programmatically add and modify HTML elements; implement media controls; implement HTML5 canvas and SVG graphics http://www.w3schools.com/html/html5_canvas.asp http://www.w3schools.com/html/html5_svg.asp   Apply styling to HTML elements programmatically. o This objective may include but is not limited to: change the location of an element; apply a transform; show and hide elements   Implement HTML5 APIs. o This objective may include but is not limited to: implement storage APIs, AppCache API, and Geolocation API http://www.w3schools.com/html/html5_geolocation.asp http://www.w3schools.com/html/html5_webstorage.asp http://www.w3schools.com/html/html5_app_cache.asp   Establish the scope of objects and variables. o This objective may include but is not limited to: define the lifetime of variables; keep objects out of the global namespace; use the “this” keyword to reference an object that fired an event; scope variables locally and globally http://robertnyman.com/2008/10/09/explaining-javascript-scope-and-closures/ http://www.quirksmode.org/js/this.html   Create and implement objects and methods. o This objective may include but is not limited to: implement native objects; create custom objects and custom properties for native objects using prototypes and functions; inherit from an object; implement native methods and create custom methods http://www.javascriptkit.com/javatutors/object.shtml http://www.crockford.com/javascript/inheritance.html http://stackoverflow.com/questions/1635116/javascript-class-method-vs-class-prototype-method http://www.javascriptkit.com/javatutors/proto.shtml     Implement Program Flow (25%) Implement program flow. o This objective may include but is not limited to: iterate across collections and array items; manage program decisions by using switch statements, if/then, and operators; evaluate expressions http://www.javascriptkit.com/jsref/looping.shtml http://www.javascriptkit.com/javatutors/varshort.shtml http://www.javascriptkit.com/javatutors/switch.shtml   Raise and handle an event. o This objective may include but is not limited to: handle common events exposed by DOM (OnBlur, OnFocus, OnClick); declare and handle bubbled events; handle an event by using an anonymous function http://dev.w3.org/2006/webapi/DOM-Level-3-Events/html/DOM3-Events.html http://javascript.info/tutorial/bubbling-and-capturing   Implement exception handling. o This objective may include but is not limited to: set and respond to error codes; throw an exception; request for null checks; implement try-catch-finally blocks http://www.javascriptkit.com/javatutors/trycatch.shtml   Implement a callback. o This objective may include but is not limited to: receive messages from the HTML5 WebSocket API; use jQuery to make an AJAX call; wire up an event; implement a callback by using anonymous functions; handle the “this” pointer http://www.w3.org/TR/2011/WD-websockets-20110419/ http://www.html5rocks.com/en/tutorials/websockets/basics/ http://api.jquery.com/jQuery.ajax/   Create a web worker process. o This objective may include but is not limited to: start and stop a web worker; pass data to a web worker; configure timeouts and intervals on the web worker; register an event listener for the web worker; limitations of a web worker https://developer.mozilla.org/en-US/docs/DOM/Using_web_workers http://www.html5rocks.com/en/tutorials/workers/basics/   Access and Secure Data (26%) Validate user input by using HTML5 elements. o This objective may include but is not limited to: choose the appropriate controls based on requirements; implement HTML input types and content attributes (for example, required) to collect user input http://diveintohtml5.info/forms.html   Validate user input by using JavaScript. o This objective may include but is not limited to: evaluate a regular expression to validate the input format; validate that you are getting the right kind of data type by using built-in functions; prevent code injection http://www.regular-expressions.info/javascript.html http://msdn.microsoft.com/en-us/library/66ztdbe6(v=vs.94).aspx https://developer.mozilla.org/en-US/docs/JavaScript/Reference/Operators/typeof http://blog.stackoverflow.com/2008/06/safe-html-and-xss/ http://stackoverflow.com/questions/942011/how-to-prevent-javascript-injection-attacks-within-user-generated-html   Consume data. o This objective may include but is not limited to: consume JSON and XML data; retrieve data by using web services; load data or get data from other sources by using XMLHTTPRequest http://www.erichynds.com/jquery/working-with-xml-jquery-and-javascript/ http://www.webdevstuff.com/86/javascript-xmlhttprequest-object.html http://www.json.org/ http://stackoverflow.com/questions/4935632/how-to-parse-json-in-javascript   Serialize, deserialize, and transmit data. o This objective may include but is not limited to: binary data; text data (JSON, XML); implement the jQuery serialize method; Form.Submit; parse data; send data by using XMLHTTPRequest; sanitize input by using URI/form encoding http://api.jquery.com/serialize/ http://www.javascript-coder.com/javascript-form/javascript-form-submit.phtml http://stackoverflow.com/questions/327685/is-there-a-way-to-read-binary-data-into-javascript https://developer.mozilla.org/en-US/docs/JavaScript/Reference/Global_Objects/encodeURI     Use CSS3 in Applications (25%) Style HTML text properties. o This objective may include but is not limited to: apply styles to text appearance (color, bold, italics); apply styles to text font (WOFF and @font-face, size); apply styles to text alignment, spacing, and indentation; apply styles to text hyphenation; apply styles for a text drop shadow http://www.w3schools.com/css/css_text.asp http://www.w3schools.com/css/css_font.asp http://nicewebtype.com/notes/2009/10/30/how-to-use-css-font-face/ http://webdesign.about.com/od/beginningcss/p/aacss5text.htm http://www.w3.org/TR/css3-text/ http://www.css3.info/preview/box-shadow/   Style HTML box properties. o This objective may include but is not limited to: apply styles to alter appearance attributes (size, border and rounding border corners, outline, padding, margin); apply styles to alter graphic effects (transparency, opacity, background image, gradients, shadow, clipping); apply styles to establish and change an element’s position (static, relative, absolute, fixed) http://net.tutsplus.com/tutorials/html-css-techniques/10-css3-properties-you-need-to-be-familiar-with/ http://www.w3schools.com/css/css_image_transparency.asp http://www.w3schools.com/cssref/pr_background-image.asp http://ie.microsoft.com/testdrive/graphics/cssgradientbackgroundmaker/default.html http://www.w3.org/TR/CSS21/visufx.html http://www.barelyfitz.com/screencast/html-training/css/positioning/ http://davidwalsh.name/css-fixed-position   Create a flexible content layout. o This objective may include but is not limited to: implement a layout using a flexible box model; implement a layout using multi-column; implement a layout using position floating and exclusions; implement a layout using grid alignment; implement a layout using regions, grouping, and nesting http://www.html5rocks.com/en/tutorials/flexbox/quick/ http://www.css3.info/preview/multi-column-layout/ http://msdn.microsoft.com/en-us/library/ie/hh673558(v=vs.85).aspx http://dev.w3.org/csswg/css3-grid-layout/ http://dev.w3.org/csswg/css3-regions/   Create an animated and adaptive UI. o This objective may include but is not limited to: animate objects by applying CSS transitions; apply 3-D and 2-D transformations; adjust UI based on media queries (device adaptations for output formats, displays, and representations); hide or disable controls http://www.bloggedbychris.com/2012/09/19/microsoft-exam-70-480-study-guide/   Find elements by using CSS selectors and jQuery. o This objective may include but is not limited to: choose the correct selector to reference an element; define element, style, and attribute selectors; find elements by using pseudo-elements and pseudo-classes (for example, :before, :first-line, :first-letter, :target, :lang, :checked, :first-child) http://www.bloggedbychris.com/2012/09/19/microsoft-exam-70-480-study-guide/   Structure a CSS file by using CSS selectors. o This objective may include but is not limited to: reference elements correctly; implement inheritance; override inheritance by using !important; style an element based on pseudo-elements and pseudo-classes (for example, :before, :first-line, :first-letter, :target, :lang, :checked, :first-child) http://www.bloggedbychris.com/2012/09/19/microsoft-exam-70-480-study-guide/   Technorati Tags: 70-480,CSS3,HTML5,HTML,CSS,JavaScript,Certification

  Read the article

< Previous Page | 139 140 141 142 143 144 145 146 147 148 149 150  | Next Page >