Search Results

Search found 5633 results on 226 pages for 'follow'.

Page 143/226 | < Previous Page | 139 140 141 142 143 144 145 146 147 148 149 150  | Next Page >

• How to Deal with a Difficult Boss?

  - by Anonymous

  I have some problems with my boss, it's quite a long story :) About one year ago, I'm working as team leader of project X. Everything work fine until one of my fellow (staff) flame me that I have problem with ALL member in our team, that guy also flame me to other staff that I report them with a poor performance. My boss call me and blame me without ask a single question. I try to explain everything to my boss but she doesn't listen to me. One month later, we have a meeting. This is only team leader's meeting, my boss talk about this problem with other team leader. There are two person who have worked with this guy, they all say "This guy cannot trust". That guy had do same thing same problem with his former team leader. Finally, everything's clear and I think I gain some trust from her. I can say that I'm the best team leader in her hand, as only project that archive more than 120% profit. Then I move to new project, this is bigger project and I can manage it quite good. But I have a problem again. One of my staff always leave and does not follow our company rule, I call him to talk and tell him that you cannot do this because that's not allow in our company. He also changed working time record file of himself, then I call him to warn again. This time he ask me to move to another project so I go to talk to my boss. She come to my building when I'm not there (other staff call me) and talk with that guy (who have problem with me); I think she still not trust me. And AGAIN, she believe what that guy said and I got blamed. I want to know how can I deal with this kind of boss, or is it better to find a new job, or any other suggestion about this problem? Thank you :) Additional information: Even my job title is "Team Leader" but it's my responsibility to manage staff working time and their behavior. This responsible is my company's rule.

  Read the article

• Unit Testing with NUnit and Moles Redux

  - by João Angelo

  Almost two years ago, when Moles was still being packaged alongside Pex, I wrote a post on how to run NUnit tests supporting moled types. A lot has changed since then and Moles is now being distributed independently of Pex, but maintaining support for integration with NUnit and other testing frameworks. For NUnit the support is provided by an addin class library (Microsoft.Moles.NUnit.dll) that you need to reference in your test project so that you can decorate yours tests with the MoledAttribute. The addin DLL must also be placed in the addins folder inside the NUnit installation directory. There is however a downside, since Moles and NUnit follow a different release cycle and the addin DLL must be built against a specific NUnit version, you may find that the release included with the latest version of Moles does not work with your version of NUnit. Fortunately the code for building the NUnit addin is supplied in the archive (moles.samples.zip) that you can found in the Documentation folder inside the Moles installation directory. By rebuilding the addin against your specific version of NUnit you are able to support any version. Also to note that in Moles 0.94.51023.0 the addin code did not support the use of TestCaseAttribute in your moled tests. However, if you need this support, you need to make just a couple of changes. Change the ITestDecorator.Decorate method in the MolesAddin class: Test ITestDecorator.Decorate(Test test, MemberInfo member) { SafeDebug.AssumeNotNull(test, "test"); SafeDebug.AssumeNotNull(member, "member"); bool isTestFixture = true; isTestFixture &= test.IsSuite; isTestFixture &= test.FixtureType != null; bool hasMoledAttribute = true; hasMoledAttribute &= !SafeArray.IsNullOrEmpty( member.GetCustomAttributes(typeof(MoledAttribute), false)); if (!isTestFixture && hasMoledAttribute) { return new MoledTest(test); } return test; } Change the Tests property in the MoledTest class: public override System.Collections.IList Tests { get { if (this.test.Tests == null) { return null; } var moled = new List<Test>(this.test.Tests.Count); foreach (var test in this.test.Tests) { moled.Add(new MoledTest((Test)test)); } return moled; } } Disclaimer: I only tested this implementation against NUnit 2.5.10.11092 version. Finally you just need to run the NUnit console runner through the Moles runner. A quick example follows: moles.runner.exe [Tests.dll] /r:nunit-console.exe /x86 /args:[NUnitArgument1] /args:[NUnitArgument2]

  Read the article

• Microsoft JScript runtime error in Visual studio 2010

  - by anirudha

  There is many tool exist to debug JavaScript visual studio , firebug and some other great plugin are one of them. here I show you solution for Microsoft JScript runtime error: Object doesn't support this property or method  if you search on Google for how to debug Javascript in Visual studio. all of them told you to follow this instruction :- go to Internet option in IE > advanced tab > Browsing section > uhcheck the both option disable script debugging for IE (internet explorer) disable script debugging (others). that’s the information you read are outdate or not true these days. in visual studio you can play with JavaScript debugging even these option is check or unchecked. off-course you  can try these step in express version of visual studio. I found a little problem that my code [based on jQuery plugin] try to call some function. some of them not implement in browser so they call other so that’s fine and work in every browser. when visual studio found some function they trying to call and not implemented in browser I use to debug they tell me Microsoft JScript runtime error: Object doesn't support this property or method  they tell me again whenever I put refresh [f5] in browser. so the thing they do you never like that. see error window first whenever code is not buggy and see everytime before see the page you want to see. this behavior harsh you. there is no problem whenever you not commonly used IE but whenever you really want to debugging you got some pain too from the behavior of this. well I have some patch for that if you really like the debugging in Visual studio with IE. so if you sure that code is not buggy or you really not want to see that’s window here is trick. when you debug the JavaScript in IE choose the compact mode and they never force you to see window first who tell the thing you not want to see. How to do that for reliefs from this pain in visual studio after debug the project or website IE gone automatically launch. go to Developer tool by pressing f12 > you see window something like this:- by the way they give you document mode IE 7 as default or browser mode based on your settings. first thing is that you need to set the compact view [any ] in browser mode. and next time the error window never come again who tell you Microsoft JScript runtime error: Object doesn't support this property or method

  Read the article

• Paypal PDT and IPN , how does it work?

  - by slow diver

  PDT Payment Data Transfer is getting the transaction data of the purchase that was made on paypal site and you want to fetch that on your own site and display to the user. Also you may want to store it in your database for archive and tracking purposes. But I cannot exactly follow the documentation here What I am not getting is Once you have activated PDT, every time a buyer makes a website payment and is redirected to your return URL, a transaction token will be passed along as a "GET" variable to this return URL. In order to properly use PDT and display transaction details to your customer, you should fetch the transaction token, variable name "tx", and retreive transaction details from PayPal by constructing an HTTP POST to PayPal. Your POST should be sent to https://www.paypal.com/cgi-bin/webscr. You must post the transaction token using the variable "tx" and the value of the transaction token previously received (e.g. "tx=transaction_token"), and the special identity token using the variable at and the value of your PDT identity token (e.g. "at=identity_token"). You will also need to append a variable named "cmd" with the value "_notify-synch", for example "cmd=_notify-synch", to the POST string. IPN I have setup Instant Payment Notification through setting according to this documentation. This is basically logging into your paypal account and enable IPN while specifying a url where the notification will be sent. This is used to complete an order so that the product can be shipped. What I did is setup a PHP page. I have created a table and whenever that page is called (or hit), it registers an entry in the table so I know a notification came from Paypal. But it does not work either. What am I really doing wrong? The first thing I want to trouble shoot though is when the buyer pays the amount, he is automatically redirected to my site. I have enabled this but automatic redirection just does not work. Instead he is shown the url as an option after payment confirmation is shown. Can someone guide my how the PDT process goes? Where do I make the request for PDT, is it along the very first request (Buy Now button) or it is sent later? Addition I found some good sampling code of how everything should work but it still does not work. I use this code http://officetrio.com/modules/free-php-paypal-ipn-script.php for IPN. I am using this for PDT. This one uses SSL, I changed SSL to regular HTTP (copied paypal version), still does not work. http://ykyuen.wordpress.com/2010/02/17/paypal-payment-data-transfer-sample-code/

  Read the article

• Book review: Peopleware: Productive Projects and Teams

  - by DigiMortal

     Peopleware by Tom DeMarco and Timothy Lister is golden classic book that can be considered as mandatory reading for software project managers, team leads, higher level management and board members of software companies. If you make decisions about people then you cannot miss this book. If you are already good on managing developers then this book can make you even better – you will learn new stuff about successful development teams for sure. Why peopleware? Peopleware gives you very good hints about how to build up working environment for project teams where people can really do their work. Book also covers team building topics that are also important reading. As software developer I found practically all points in this book to be accurate and valid. Many times I have found my self thinking about same things and Peopleware made me more confident about my opinions. Peopleware covers also time management and planning topics that help you do way better job on using developers time effectively by minimizing the amount of interruptions by phone calls, pointless meetings and i-want-to-know-what-are-you-doing-right-now questions by managers who doesn’t write code anyway. I think if you follow suggestions given by Peopleware your developers are very happy. I suggest you to also read another great book – Death March by Edward Yourdon. Death March describes you effectively what happens when good advices given by Peopleware are totally ignored or worse yet – people are treated exactly opposite way. I consider also Death March as golden classics and I strongly recommend you to read this book too. Table of Contents Acknowledgments Preface to the Second Edition Preface to the First Edition Part 1: Managing the Human Resource Chapter 1: Somewhere Today, a Project Is Failing Chapter 2: Make a Cheeseburger, Sell a Cheeseburger Chapter 3: Vienna Waits for You Chapter 4: Quality-If Time Permits Chapter 5: Parkinson's Law Revisited Chapter 6: Laetrile Part II: The Office Environment Chapter 7: The Furniture Police Chapter 8: "You Never Get Anything Done Around Here Between 9 and 5" Chapter 9: Saving Money on Space Intermezzo: Productivity Measurement and Unidentified Flying Objects Chapter 10: Brain Time Versus Body Time Chapter 11: The Telephone Chapter 12: Bring Back the Door Chapter 13: Taking Umbrella Steps Part III: The Right People Chapter 14: The Hornblower Factor Chapter 15: Hiring a Juggler Chapter 16: Happy to Be Here Chapter 17: The Self-Healing System Part IV: Growing Productive Teams Chapter 18: The Whole Is Greater Than the Sum of the Parts Chapter 19: The Black Team Chapter 20: Teamicide Chapter 21: A Spaghetti Dinner Chapter 22: Open Kimono Chapter 23: Chemistry for Team Formation Part V: It't Supposed to Be Fun to Work Here Chapter 24: Chaos and Order Chapter 25: Free Electrons Chapter 26: Holgar Dansk Part VI: Son of Peopleware Chapter 27: Teamicide, Revisited Chapter 28: Competition Chapter 29: Process Improvement Programs Chapter 30: Making Change Possible Chapter 31: Human Capital Chapter 32:Organizational Learning Chapter 33: The Ultimate Management Sin Is Chapter 34: The Making of Community Notes Bibliography Index About the Authors

  Read the article

• Wordpress Installation (on IIS and SQL Server)

  - by Davide Mauri

  To proceed with the installation of Wordpress on SQL Server and IIS, first of all, you need to do the following steps Create a database on SQL Server that will be used by Wordpress Create login that can access to the just created database and put the user into ddladmin, db_datareader, db_datawriter roles Download and unpack Wordpress 3.3.2 (latest version as of 27 May 2012) zip file into a directory of your choice Download the wp-db-abstraction 1.1.4 (latest version as of 27 May 2012) plugin from wordpress.org website Now that the basic action has been done, you can start to setup and configure your Wordpress installation. Unpack and follow the instructions in the README.TXT file to install the Database Abstraction Layer. Mainly you have to: Upload wp-db-abstraction.php and the wp-db-abstraction directory to wp-content/mu-plugins.  This should be parallel to your regular plugins directory.  If the mu-plugins directory does not exist, you must create it. Put the db.php file from inside the wp-db-abstraction.php directory to wp-content/db.php Now you can create an application pool in IIS like the following one Create a website, using the above Application Pool, that points to the folder where you unpacked Wordpress files. Be sure to give the “Write” permission to the IIS account, as pointed out in this (old, but still quite valid) installation manual: http://wordpress.visitmix.com/development/installing-wordpress-on-sql-server#iis Now you’re ready to go. Point your browser to the configured website and the Wordpress installation screen will be there for you. When you’re requested to enter information to connect to MySQL database, simply skip that page, leaving the default values. If you have installed the Database Abstraction Layer, another database installation screen will appear after the one used by MySQL, and here you can enter the configuration information needed to connect to SQL Server. After having finished the installation steps, you should be able to access and navigate your wordpress site.  A final touch, and it’s done: just add the needed rewrite rules http://wordpress.visitmix.com/development/installing-wordpress-on-sql-server#urlrewrite and that’s it! Well. Not really. Unfortunately the current (as of 27 May 2012) version of the Database Abstraction Layer (1.1.4) has some bugs. Luckily they can be quickly fixed: Backslash Fix http://wordpress.org/support/topic/plugin-wp-db-abstraction-fix-problems-with-backslash-usage Select Top 0 Fix Make the change to the file “.\wp-content\mu-plugins\wp-db-abstraction\translations\sqlsrv\translations.php” suggested by “debettap”   http://sourceforge.net/tracker/?func=detail&aid=3485384&group_id=315685&atid=1328061 And now you have a 100% working Wordpress installation on SQL Server! Since I also wanted to take advantage of SQL Server Full Text Search, I’ve created a very simple wordpress plugin to setup full-text search and to use it as website search engine: http://wpfts.codeplex.com/ Enjoy!

  Read the article

• Big Data – Buzz Words: What is NewSQL – Day 10 of 21

  - by Pinal Dave

  In yesterday’s blog post we learned the importance of the relational database. In this article we will take a quick look at the what is NewSQL. What is NewSQL? NewSQL stands for new scalable and high performance SQL Database vendors. The products sold by NewSQL vendors are horizontally scalable. NewSQL is not kind of databases but it is about vendors who supports emerging data products with relational database properties (like ACID, Transaction etc.) along with high performance. Products from NewSQL vendors usually follow in memory data for speedy access as well are available immediate scalability. NewSQL term was coined by 451 groups analyst Matthew Aslett in this particular blog post. On the definition of NewSQL, Aslett writes: “NewSQL” is our shorthand for the various new scalable/high performance SQL database vendors. We have previously referred to these products as ‘ScalableSQL‘ to differentiate them from the incumbent relational database products. Since this implies horizontal scalability, which is not necessarily a feature of all the products, we adopted the term ‘NewSQL’ in the new report. And to clarify, like NoSQL, NewSQL is not to be taken too literally: the new thing about the NewSQL vendors is the vendor, not the SQL. In other words - NewSQL incorporates the concepts and principles of Structured Query Language (SQL) and NoSQL languages. It combines reliability of SQL with the speed and performance of NoSQL. Categories of NewSQL There are three major categories of the NewSQL New Architecture – In this framework each node owns a subset of the data and queries are split into smaller query to sent to nodes to process the data. E.g. NuoDB, Clustrix, VoltDB MySQL Engines – Highly Optimized storage engine for SQL with the interface of MySQ Lare the example of such category. E.g. InnoDB, Akiban Transparent Sharding – This system automatically split database across multiple nodes. E.g. Scalearc  Summary In simple words – NewSQL is kind of database following relational database principals and provides scalability like NoSQL. Tomorrow In tomorrow’s blog post we will discuss about the Role of Cloud Computing in Big Data. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

  Read the article

• Cannot boot into system after deleting partition

  - by Clayton

  Okay...so this was kind of a stupid thing for me to do now that I think back on it. I was experiencing a ton of lag and not as much memory that I could use after installing Ubuntu 12.04. So after remembering I had installed multiple server versions of Ubuntu 12.04 by mistake, I went into Disk Management and proceeded to delete each and every one. Everything went fine. Up until this week, I have not experienced any problems. But starting yesterday I began to get lag just as I had before, and nothing fixed the problem. I decided to remove the Ubuntu partition, since I was also experiencing a visual error when given the option to select one to boot(the screen doesn't come up at all, and I recieved a monitor resolution error instead, but could still access both Windows and Ubuntu via arrow keys). After deleting the Ubuntu partition, so that I could see if running just Windows would fix the problem, I proceeded with what I was doing, installing a few programs that were not tied to my prediciment in any way. Upon rebooting my desktop, however, I recieved the following error: error: unknown filesystem. grub rescue> Hoping I could boot into Ubuntu via a pendrive and possibly backup my important files and wipe the hard drive to start fresh, I installed Ubuntu 13.04, but even that does not boot. Instead, I get this message on a terminal screen: SYSLINUX 4.06. EDD 4.06-pre1 Copyright (C) 1994-2011 H. Peter Anvin et al ERROR: No configuration file found No DEFAULT or UI configuration directive found! boot: So more or less, my desktop is screwed. I need to be able to get to the files inside because of my job as an artist, as well as retrieve my documents for my stories stored on Windows. Once I can succeed in solving this once and for all, I know for a fact I will stick to Ubuntu only, and install what is required to be able to run any Windows applications I used to use or need to use. I would rather not reformat the hard drive, and if I need to, it is a last resort. And I doubt I can use a Windows Recovery Disk to get my files back, as my mom has thrown out a lot of the installation disks and paperwork I would need to even follow through with that. :\ Keep in mind that I am a novice/newbie when it comes to Linux, but am hoping ot become better at it as time goes by. I appreciate any help you guys can give me. This will probably be the last time I attempt to do anything that could risk the well-being of my PC. (I've also looked through various questions on the site and tested a lot of the solutions. None seem to have worked.)

  Read the article

• Database Mirroring – deprecated

  - by fatherjack

  Do you use mirroring on any of your databases? Do you use mirroring on SQL Server Standard Edition? I do, as a way of having a stand-by server ready to take over if there is a problem with the live server so that business can continue despite whatever disaster may strike at our primary server location. In my experience it has been a great solution for us as it is simple to implement, reliable and predictable. Mirroring has been around since SQL Server 2005 sp1 but with the release of SQL Server 2012 mirroring has now been placed on the deprecation list. That’s right, Microsoft are removing this feature from SQL Server. SQL Server 2012 had lots of improvements and new features around this sort of technology – the High Availability, Disaster recovery and Always On features described in detail here by Brent Ozar and  Microsoft’s own Customer Service and Support SQL Server Engineers . Now the bad news, the HADRON features are pretty much all wrapped up in the Enterprise Edition of SQL Server 2012. This is going to be a big issue for people, like me, who are only on Standard Edition of earlier versions mostly due to our requirements and the budget (or lack thereof) required for Enterprise Edition licenses. No mirroring in Standard Edition means no upgrade. Don’t Panic. There are two stages of deprecation and they dont happen fast. The first stage – Deprecation Announcement- means that Microsoft have decided that there is a limited future for a particular feature and this is your cue that new projects and developments should not be implemented on this technology as it will cease to exist in the future. This is where mirroring currently stands. You have time to consider your options and start work on planning how you will move away from using this feature. This can be 2 or 3 versions of SQL Server, possibly more. The next stage is Deprecation Final Support - this is where you are on your last chance, When you see this then the next version of SQL Server will not have this feature in it so you need to implement your plans to move to an alternative solution. While these two phases are taking place Microsoft are open to feedback on how people use their products and if enough people make the case for mirroring (or an equivalent technology) to be in the Standard Edition then they may make changes rather than lose customers or have customers cease upgrading in order to keep the functionality they need. Denny Cherry (@MrDenny) has published an article on this same topic here with more detail than me so I wont go over old ground. All I will say is that you should read his article now and then follow the link to his own site where he is collecting peoples information on how they use mirroring in Standard Edition so that our voice can be put to Microsoft.  

  Read the article

• HighPoint RocketRAID 62x Controller

  - by TeXnewbie

  I have the subject card recently installed in Ubuntu 12.04.1 LTS (GNU/Linux 3.2.0-31-generic x86_64). See partial lspci -vv listing below (complete listing played havoc with pre tags): 03:00.0 RAID bus controller: HighPoint Technologies, Inc. Device 0622 (rev 01) Subsystem: HighPoint Technologies, Inc. Device 0001 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at 9c00 [size=8] Region 1: I/O ports at 9800 [size=4] Region 2: I/O ports at 9400 [size=8] Region 3: I/O ports at 9000 [size=4] Region 4: I/O ports at 8c00 [size=16] Region 5: Memory at fdbff000 (32-bit, non-prefetchable) [size=2K] Expansion ROM at fdbe0000 [disabled] [size=64K] Capabilities: I followed instructions I found at https://help.ubuntu.com/community/RocketRaid to compile the drivers for it, and although performing the process described there seemed to work fine with no noticeable errors, when I rebooted after performing that procedure I could not boot. During dkms steps, I noticed messages indicating that (If next boot fails, revert to initrd.img-3.2.0-31-generic.old-dkms image) update-initramfs................ so I booted using a Ubuntu 12.10 LiveDVD and reverted to the old-dkms initrd.img as suggested above, but this failed to repair the boot problem. Ultimately, I used https://help.ubuntu.com/community/Boot-Repair in Ubuntu-Secure-Remix to fix the boot problem and was able to boot normally again, but now with the newly generated initrd.img in place again (which now boots normally), when I modprobe the rr62x kernel module, I immediately get a hard crash with messages to console about a kernel paging request that seems to have caused the problem. I've tried on multiple occasions now to use the newly built kernel module so as to allow me to use an eSATA port multiplier plugged into the card, but to no avail. Any suggestions on fixes or workarounds (I've read that some of the HighPoint cards (2720SGL) seem to work as a host bus adapter and thus may not need a custom driver, but that seems not to be the case for mine) would be most appreciated. My goal is to use the card as described here and with software RAID mdadm utilities. If necessary, I can hand-copy the console messages after the hard crash into a follow-up message, but I obviously can't do a cut/paste. I'll gladly provide any other details that are needed, but not sure what those would be at this point, so I'll refrain from adding other details for now. Thanks in advance for any help.

  Read the article

• No sound after clean install 11.10

  - by Jorge

  First of all, sorry to ask this, I'm sure that this was asked so many times before. Second, sorry for the English, it's not my native language. And Third, thank you in advance. So, I hope the follow info will help, here's a log. http://www.alsa-project.org/db/?f=07089caf530494bc4bc23e1d1cd56b3a5fae03c6 I already check 'System - Preferences - Sound'. Here's a screenshot http://i.imgur.com/Ghwnj.png > jorge@jorge-desktop:~$ sudo lshw -class multimedia > *-multimedia > description: Multimedia audio controller > product: VT8233/A/8235/8237 AC97 Audio Controller > vendor: VIA Technologies, Inc. > physical id: 11.5 > bus info: pci@0000:00:11.5 > version: 60 > width: 32 bits > clock: 33MHz > capabilities: pm cap_list > configuration: driver=VIA 82xx Audio latency=0 > resources: irq:22 ioport:e400(size=256) Tried with no results: > sudo apt-get remove --purge alsa-base > sudo apt-get remove --purge pulseaudio > sudo apt-get clean && sudo apt-get autoremove > sudo apt-get install alsa-base > sudo apt-get install pulseaudio > sudo apt-get install ubuntu-desktop Also > sudo gedit /etc/default/grub > > from: > > GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" > > to: > > GRUB_CMDLINE_LINUX_DEFAULT="quiet splash radeon.audio=1" > > sudo update-grub > > And Reboot... without any result. EDIT: I made sure that everything it's fine with aplay -l and lspci -v and lsmod; and checked alsamixer, it's not in mute. Well I'm running out of ideas. Thanks.

  Read the article

• SharePoint Designer 2010 Workflow Email Link To Item

  - by Brian Jackett

  In this post I’ll walk you through the process of sending an email that contains a link to the current item from a SharePoint Designer 2010 workflow.  This is a process that has been published on many other forums and blogs, but many that I have seen are more complex than seems necessary. Problem     A common request from SharePoint users is to get an email which contains a link to review/approve/edit the workflow item.  SharePoint list items contain an automatic property for Url Path, but unfortunately that Url is not properly formatted to retrieve the item if you include it directly on the message body.  I tried a few solutions suggested from other blogs or forums that took a substring of the Url Path property, concatenated the display form view Url, and mixed in some other strings.  While I was able to get this working in some scenarios I still had issues in general. Solution     My solution involved adding a hyperlink to the message body.  This ended up being far easier than I had expected and fairly intuitive once I found the correct property to use.  Follow these steps to see what I did.     First add a “Send an Email” action to your workflow.  Edit the action to pull up the email configuration dialog.  Click the “Add hyperlink” button seen below. When prompted for the address of the link click the fx button to perform a lookup.  Choose Workflow Context from the “data source” dropdown.  Choose Current Item URL from the “field from source” dropdown.  Click OK. Your Edit Hyperlink dialog should now look something like this. The end result will be a hyperlink added to your email pointing to the current workflow item.  Note: this link points to the non-modal dialog display form (display form similar to what you had in 2007). Conclusion     In this post I walked you through the steps to create a SharePoint Designer 2010 workflow with an email that contains a link to the current item.  While there are many other options for accomplishing this out on the web I found this to be a more concise process and easy to understand.  Hopefully you found this helpful as well.  Feel free to leave any comments or feedback if you’ve found other ways that were helpful to you.         -Frog Out

  Read the article

• BPM 11g Customer Stories & Solution Catalog & Process Accelerators

  - by JuergenKress

  Stories Everyone loves a good story on planning or implementing a BPM strategy. Everyone wants to hear how it was done before?, what worked?, what was achieved? If you have achieved success with BPM, we are very keen to hear your stories and examples of how your customers use it. We receive lots of requests from people who are thinking of using BPM to solve a specific problem or in combination with a specific technology to talk to someone who has done it before. These stories are invaluable. Drop down the details of anything you think is relevant with a bit of detail and we will follow up on it. As one good deed deserves another, we will do our best to give you stories if you need them to show that where you are going, others have treaded before. Send your stories to us using this e-mail link and we will share them among other like minded people. Solution Catalogue This summer, Oracle is launching a solution catalogue specifically intended for partners. If you have delivered a successful implementation in BPM and think it could be reused and applied again in a similar scenario in the same industry or in a similar environment, then we ware keen to know about it and will add it to the solution catalogue. The solution catalogue will showcase successful BPM solutions both inside and outside Oracle. Be in touch with us on this e-mail link and we will make sure to add your solution. Process Accelerators Finally if you have specific processes that you are expert on, you have implemented at a customer and you want to work with us on getting these productised, then we would love to know about it. The process accelerator programme is explained in the most recent SOA/BPM Community Newsletter but again feel free to contact us if you want to get involved. Good luck with BPM and let us know how we can help. Barry O'Reilly Director BPM Solutions [email protected] SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit  www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: BPM,Barry O Reilly,SOA Community,Oracle SOA,Oracle BPM,BPM Community,OPN,Jürgen Kress

  Read the article

• CIO's Corner: Achieving a Balance

  - by Michelle Kimihira

  Author: Rick Beers Senior Director, Product Management, Oracle Fusion Middleware All too often, a CIO is unfairly characterized as either technology-focused or business-focused; as more concerned with either infrastructure performance or business excellence. It seems to me that this completely misses the point. I have long thought that a CIO has probably the most complex C-level position in an enterprise, one that requires an artful balance among four entirely different constituencies, often with competing values and needs. How a CIO balances these is the single largest determinant of success. I was reminded of this while reading the excellent interview of Mark Hurd by CNBC’s Maria Bartiromo in a recent issue of USATODAY (Bartiromo: Oracle's Hurd is in tech sweet spot). The interview covers topics such as Big Data, Leadership and Oracle’s growth strategy. But the topic that really got my interest, and reminded me of the need for balance, was on IT spending trends, in which Mark Hurd observed, “…budgets are tight. What most of our customers have today is both an austerity plan to save money and at the same time a plan to reapply that money to innovation. There isn't a customer we have that doesn't have an austerity plan and an innovation plan.” In an era of economic uncertainty, and an accelerating pace of business change, this is probably the toughest balance a CIO must achieve. Yet for far too many IT organizations, operating costs consume over 75% of their budgets, leaving precious little for innovation and investment in business-critical technology programs. I have found that many CIO’s are trapped by their enterprise systems platforms, which were originally architected for Standardization, Compliance and tightly integrated linear Workflows. Yes, these traits are still required for specific reasons and cannot be compromised. But they are no longer enough. New demands are emerging: the explosion in the volume and diversity of Data, the Consumerization of IT, the rise of Social Media, and the need for continual Business Process Reengineering. These were simply not the design criteria for Enterprise 1.0 and attempting to leverage them with current systems platforms results in an escalation in complexity and a resulting increase in operating costs for many IT organizations. This is the cost vs investment trap and what most constrains CIO’s from achieving the balance they need. But there is a way out of this trap. Enterprise 2.0 represents an entirely new enterprise systems architecture, one that is ‘Business-Centric’ rather than ‘ERP Centric’, which defined the architecture of Enterprise 1.0. Oracle’s best in class suite of Fusion Middleware Products enables a layered approach to enterprise systems architectures that provides the balance that an enterprise needs. The most exciting part of all this? The bottom two layers are focused upon reducing costs and the upper two layers provide business value and innovation. Finally, the Balance a CIO needs.  Additional Information Product Information on Oracle.com: Oracle Fusion Middleware Follow us on Twitter and Facebook Subscribe to our regular Fusion Middleware Newsletter

  Read the article

• LightSwitch Tutorial - Adding Image to a LightSwitch Screen

  - by ChrisD

  Last week, I have discussed how to control Screen Layouts in LightSwitch. Now, I will talk about how to add an image to the LightSwitch screen. In this demo, I will try to upload the image to the screen and will save the image into the database. The first step we need to do is start the VS 2010, create LightSwitch Desktop application with the name “AddingImageIntoScreenInLSBeta2” as shown in the following figure. The second steps, create a table as shown in the screen by selecting the "create a table" option in the start up screen. Then, we need to add a New Data Screen to our demo application. See the following figure which is the default screen layouts for the screen we have created. So we have to change the layout of this screen so that the uploading and using the image in the screen can be easily explained. Before adding the Model Window we have to prepare the layout. So delete the Highlighted fields as shown in the above figure. After preparing the layout to add the image, just add a new Group to the Person Property Rows Layout. To add a new group, [No: 1] – Select the Rows layout, it will shows you the Add button. [No: 2] – Click the Add button to select the new group. [No: 3] – Select the New Group. After adding the new group change the Layout type to Columns Layout. Here, -          Change the rows layout to columns layouts and give the display name as Uploading Image Example. -          Click on the add button to add the Photo field under the column layout. Add a new group under the Column layout group. Follow the [No: #] to create a new group under the columns layout group. After adding a new group of rows layout add the fields to the newly created group. [No: 1] – Select the Rows Layout group and change the display name as Details. [No: 2] – Click on Add button to select the appropriate fields to add to the group. [No: 3] – Add the fields to the group The above snippet shows the complete layout tree for our screen. Now the screen for uploading the image is ready. Just press the Play button. And see the result.

  Read the article

• Oracle Gave Me a Chance - ECEMEA Internship Programme

  - by FelixWehmeyer

  My name is Mohammad Raad and I started in the One Year Training program with Oracle on March 1, 2012. I graduated on September 2011 and started searching for a job. Starting your career, as you all know, is hard because some companies see you as a fresh graduate lacking experience and no one is willing to invest in you. I used to check the recruitment websites daily to see if there were openings to apply to, but unfortunately no one wanted to hire a zero year experience fresh graduate. One day I saw Oracle’s 1 year internship program advertised and that was what I needed. I applied but expected nothing to happen because I was used to applying and getting no replies, but they called and that was the start! I had my first interview over the phone and decided to go to Qatar and to continue to search for a job. Two weeks after arriving at Qatar, Oracle called me for a second interview in Lebanon so I booked a ticket on the same day because my interview was the next day I had my interview and went back to Qatar. On January 2012, I heard from Oracle that I was accepted and they choose me for this program, it was a day I will not forget! Starting on 1st March 2012, I was full of energy, willing to do anything to gain experience and prove that I can do it. What really give me a big push is my colleagues’ motivation and support especially from Youssef Halawi, my mentor and Rami Mattar because they believe in me and track my progress day-by-day. At Oracle, I meet customers, attend meetings, demos and presentations, partners’ events and online trainings. Now I’m focusing on a specific product that I really liked and aim to master by the end of my internship. So dear readers wish me good luck! I know that I will get the experience that I want, because from Oracle, a leader in its industry, you have the chance to grab experience as much as you can handle, simply because there are no limits to excellence. Do you want to find out more about the open roles within Oracle? Follow us on https://campus.oracle.com.

  Read the article

• TFS Hosting: discountasp.net TFS

  - by Enrique Lima

  In the last month or so I have been able to test and experience first hand the offering from discountasp.net for hosted TFS 2010. This first part is a description of the setup process for the account itself and getting some additional information on what you will find through the portal on their site. Not long ago, I posted a little tidbit on hosting TFS.  Through it I also did a shameless plug to my employer, our services and the type of hosting we recommend.  So, wouldn’t me running on discountasp.net be an issue?  Actually? NO. Ok, enough rambling.  Let’s get some details here. It is a Software as a Service model.  Through it we get Source Control, Version Control, Work Item Tracking and such.  What about Build?  If your need includes Build Management and such, you may need to look at some other options.  But, still this is a great offering for those that are moving from SourceSafe.  Or organizations who have 3 to 5 developers on staff, and do not foresee getting larger anytime soon.  Can it support more than 5 developers?  Yes, but then we need to get into how are you using TFS.  Do you need more than just Basic?  For example, SharePoint and Reporting Services integration. The signup process was seamless! Very easy to follow, complete and transition to Visual Studio to start working. An email followed the signup process, it contained details on how to get to the Team Foundation Server Control Panel login.  Once there, here is what I saw after the initial setup process of naming my Team Project Collection: So, moving on … once I clicked the area to get my server info, I got the following: Then it was a matter of getting the first user in there: Then on to connecting Visual Studio to my hosted TFS. Getting the server information, and the user account created I will configure those options in Visual Studio. Using Team Explorer, I am adding a new server configuration. Once this is provided, click OK, I will be challenged for a username and password, provide them and you will land on the following screen. Then Click Close. You will now be connected to your server and Team Project Collection. Since this will likely be the first time connecting, you will have no Projects (I already have 2 going). Click Connect, and you will be back in Team Explorer. My next post in the topic will be on Creating your First Team Project and uploading a Project Template to the server.

  Read the article

• Five hours of Task Flow Overview Recordings Available

  - by Frank Nimphius

  In addition to the ADF Controller task flow documentation in Oracle Fusion Middleware Fusion Developer's Guide for Oracle Application Development Framework 11g Release 1 http://download.oracle.com/docs/cd/E21764_01/web.1111/b31974/partpage3.htm#BABHIIAI The ADF Insider website … http://www.oracle.com/technetwork/developer-tools/adf/learnmore/adfinsider-093342.html … hosts five online videos that explain how to build and work with ADF Controller task flows in Oracle ADF. ADF Task Flow - Overview (Part 1) This 90 minute recording introduces the concept of ADF unbounded and bounded task flows, as well as other ADF Controller features. The session starts with an overview of unbounded task flows, bounded task flows and the different activities that exist for developers to build complex application flows. Exception handling and the Train navigation model is also covered in this first part of a two part series. By example of developing a sample application, the recording guides viewers through building unbounded and bounded task flows. This session is continued in a second part. http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/taskflow-overview-p1/taskflow-overview-p1.html ADF Task Flow - Overview (Part 2) This 75 minute session continues where part 1 ended and completes the sample application that guides viewers through different aspects of unbounded and bounded task flow development. In this recording, memory scopes, save for later, task flow opening in dialogs and remote task flow calls are explained and demonstrated. If you are new to ADF Task Flow, then it is recommended to first watch part 1 of this series to be able to follow the explanation guided by the sample application. http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/taskflow-overview-p2/taskflow-overview-p2.html ADF Region Interaction - An Overview This session covers most of the options that exist for communicating between regions. It briefly discusses what it takes to build regions from bounded task flows before going into details using slides and samples. The following interaction is explained: contextual events, queue action in region, input parameters and PPR, drag and drop, shared Data Controls, parent action and region navigation listener. http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/adf-region-interaction/adf-region-interaction.html ADF Region Interaction - Contextual Events Contextual event is used as a communication channel between a parent view and its contained regions, as well as between regions. By example, this session explains how to set up contextual events, how to define producers and event listeners and how to define the payload message. http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/AdfInsiderContextualEvents/AdfInsiderContextualEvents.html

  Read the article

• SQL SERVER – DELETE, TRUNCATE and RESEED Identity

  - by pinaldave

  Yesterday I had a headache answering questions to one of the DBA on the subject of Reseting Identity Values for All Tables. After talking to the DBA I realized that he has no clue about how the identity column behaves when there is DELETE, TRUNCATE or RESEED Identity is used. Let us run a small T-SQL Script. Create a temp table with Identity column beginning with value 11. The seed value is 11. USE [TempDB] GO -- Create Table CREATE TABLE [dbo].[TestTable]( [ID] [int] IDENTITY(11,1) NOT NULL, [var] [nchar](10) NULL ) ON [PRIMARY] GO -- Build sample data INSERT INTO [TestTable] VALUES ('val') GO When seed value is 11 the next value which is inserted has the identity column value as 11. – Select Data SELECT * FROM [TestTable] GO Effect of DELETE statement -- Delete Data DELETE FROM [TestTable] GO When the DELETE statement is executed without WHERE clause it will delete all the rows. However, when a new record is inserted the identity value is increased from 11 to 12. It does not reset but keep on increasing. -- Build sample data INSERT INTO [TestTable] VALUES ('val') GO -- Select Data SELECT * FROM [TestTable] Effect of TRUNCATE statement -- Truncate table TRUNCATE TABLE [TestTable] GO When the TRUNCATE statement is executed it will remove all the rows. However, when a new record is inserted the identity value is increased from 11 (which is original value). TRUNCATE resets the identity value to the original seed value of the table. -- Build sample data INSERT INTO [TestTable] VALUES ('val') GO -- Select Data SELECT * FROM [TestTable] GO Effect of RESEED statement If you notice I am using the reseed value as 1. The original seed value when I created table is 11. However, I am reseeding it with value 1. -- Reseed DBCC CHECKIDENT ('TestTable', RESEED, 1) GO When we insert the one more value and check the value it will generate the new value as 2. This new value logic is Reseed Value + Interval Value – in this case it will be 1+1 = 2. -- Build sample data INSERT INTO [TestTable] VALUES ('val') GO -- Select Data SELECT * FROM [TestTable] GO Here is the clean up act. -- Clean up DROP TABLE [TestTable] GO Question for you: If I reseed value with some random number followed by the truncate command on the table what will be the seed value of the table. (Example, if original seed value is 11 and I reseed the value to 1. If I follow up with truncate table what will be the seed value now? Here is the complete script together. You can modify it and find the answer to the above question. Please leave a comment with your answer. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Suggestions for getting an open source electron beam tracking code going

  - by Boaz

  I work in the field of accelerator physics and synchrotron radiation. High energy electrons circulating in large rings of magnets produce x-rays that are used for a variety of different kinds of science. Running and improving these facilities requires controlling and modelling the electron beam as it circulates in the ring. A code to model this basically requires trackers to follow the electrons through the elements (something called a symplectic integrator), and then the computation of different parameters associated with this motion. The problem with these codes is that every facility has there own. In principle the code is not so complex. And as a modelling project, one might think it has some general interest. Who doesn't want to be able to create a track in space out of magnets and watch the electrons circulate? There is a Matlab based code to do this called Accelerator Toolbox, but the creator of the code is no longer in the field. I put the code in Sourceforge under the name atcollab. The basic resource is in C- it is the set of symplectic integrators. These are available in the atcollab code here. It has been useful to put the code on Sourceforge in order to exchange code, but the community of users is quite small and most are too busy to put that much time into collaboration. So in terms of really improving the code, I don't think it has been so successful. Any piece of this picture could be recreated without that much difficulty, but overall it is a bit complex, and because each lab has their own installation with lots of add-on Matlab code, people find it hard to really work together and share code. Somehow I think we need to involve a wider community in our development, or just use some standard tools. But for that, I suppose it needs to be of some general interest. I think symplectic integrators may have some general interest. And the part about a plug-in architecture to build up the ring ought to fit other patterns. Or the other option is to just accept that this is not a problem of general interest, and work harder within our small community. Suggestions, or anecdotes of analogous experience would be appreciated.

  Read the article

• How to integrate Java ME SDK 3.2 with NetBeans

  - by SungmoonCho

  Many people like to use Java ME SDK with IDEs. We provided instructions on how to integrate the SDK with NetBeans through the download page, and also through the release note, however, let me explain it here once again with some screen shots. 1. Download Java ME SDK and NetBeans plugin from here. 2. Install Java ME SDK first. You will have the emulator and the runtime on your machine. Also please unarchive the NetBeans plugin somewhere. 3. Launch NetBeans. 4. Go to "Tools" - "Plugins". 5. Check out the "Installed" tab. Check "Show details". If you see the previous version of Java ME SDK Tools installed already. Check those to uninstall them. 6. Go to "Settings" tab. 7. Click "Add", and provide the location of NetBeans plugin. In my case, it is "file:/C:/Users/sungcho/Downloads/nb-me-sdk-plugins-uc/updates.xml". Don't forget to add "updates.xml" at the end. 8. Click "Okay" 9. Click "Available Plugins" tab. 10. If you scroll down, you will see three Java ME SDK Tools. Check "Java ME SDK Tools" plugin. Also check others as you desire. 11. Follow the instruction and install them. 12. Restart NetBeans 13. That is it. Done. Now you will see Oracle Java ME SDK 3.2 in your Java Platform list.

  Read the article

• Difference between the terms Material & Effect

  - by codey

  I'm making an effect system right now (I think, because it may be a material system... or both!). The effects system follows the common (e.g. COLLADA, DirectX) effect framework abstraction of Effects have Techniques, Techniques have Passes, Passes have States & Shader Programs. An effect, according to COLLADA, defines the equations necessary for the visual appearance of geometry and screen-space image processing. Keeping with the abstraction, effects contain techniques. Each effect can contain one or many techniques (i.e. ways to generate the effect), each of which describes a different method for rendering that effect. The technique could be relate to quality (e.g. high precision, high LOD, etc.), or in-game-situation (e.g. night/day, power-up-mode, etc.). Techniques hold a description of the textures, samplers, shaders, parameters, & passes necessary for rendering this effect using one method. Some algorithms require several passes to render the effect. Pipeline descriptions are broken into an ordered collection of Pass objects. A pass provides a static declaration of all the render states, shaders, & settings for "one rendering pipeline" (i.e. one pass). Meshes usually contain a series of materials that define the model. According to the COLLADA spec (again), a material instantiates an effect, fills its parameters with values, & selects a technique. But I see material defined differently in other places, such as just the Lambert, Blinn, Phong "material types/shaded surfaces", or as Metal, Plastic, Wood, etc. In game dev forums, people often talk about implementing a "material/effect system". Is the material not an instance of an effect? Ergo, if I had effect objects, stored in a collection, & each effect instance object with there own parameter setting, then there is no need for the concept of a material... Or am I interpreting it wrong? Please help by contributing your interpretations as I want to be clear on a distinction (if any), & don't want to miss out on the concept of a material if it should be implemented to follow the abstraction of the DirectX FX framework & COLLADA definitions closely.

  Read the article

• Are You an IT Geek? Why Not Write for How-To Geek?

  - by The Geek

  Are you a geek in the IT field that wants to share your skills with the world? We’re looking for an experienced Sysadmin / IT Admin / Webmaster geek with writing skills that wants to join our team on a part-time basis. Please apply if you have the following qualities: You must be a geek at heart, willing to try and make the boring world of IT sound glamorous and sexy. If that’s not possible, at least be willing to share your wisdom and skills to help other IT geeks save time and become better at what they do. You must be able to write articles that are easy to understand. Either Windows or Linux writers are welcome to apply. You must be able to follow our style guide. You must be creative. You must generate ideas for articles on your own, and take suggestions like a pro. You’re ambitious, looking to build your skills and your name, and are prepared to work hard. If you aren’t willing to work hard, put some dedication and pride into your work, or aren’t really interested in the topic, this job might not be for you. We’re looking for serious individuals that want to grow with us, and as we grow, you’ll grow as well. How To Apply If you think this job is a good fit for you, send an email to [email protected] and include some background information about yourself, why you’d be a good fit, some topic areas you are familiar with, and hopefully some examples of your work. Bonus points if you have a ninja costume and a keyboard strapped to your back. Similar Articles Productive Geek Tips What Topics Should The How-To Geek Write About?Got Awesome Skills? Why Not Write for How-To Geek?Got Awesome Geek Skills? The How-To Geek is Looking for WritersAbout the GeekThe How-To Geek Bounty Program TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 QuicklyCode Provides Cheatsheets & Other Programming Stuff Download Free MP3s from Amazon Awe inspiring, inter-galactic theme (Win 7) Case Study – How to Optimize Popular Wordpress Sites Restore Hidden Updates in Windows 7 & Vista Iceland an Insurance Job?

  Read the article

• An Epic Question "How to call a method when the page loads"

  - by Arunkumar Ramamoorthy

  Quite often, there comes a question in OTN, with different subjects, all meaning "How to call a method when my ADF page loads?". More often, people tend to take the approach of ADF Phase Listener by overriding before/afterPhase methods.In this blog, we will go through different options in achieving it.1. Method Call Activity as default activity in Taskflow :If the application is built with taskflows, then this is the best suited approach to take. 1.a. Calling a Data Control Method :To call a Data Control method (ex: A method in AMImpl exposed as client interface), simply Drag and Drop the method as Default Method Call Activity, then draw a control flow case from the method to your page. Once after this, drop the taskflow as region in main page. When we run the main page, the Method Call Activity would be called first, and then the page will be rendered.1.b. Calling a Method in Backing Bean: To call a method in the backing bean before pageload, we can follow the similar approach as above. Instead of binding the Method Call Activity to an action/method binding in pagedef, we bind to the method. Insert a Method Call Activity (and make it as default) from the Component Palette. Double click on to select a method to bind. This approach can also be used, to perform some action in backing bean along with calling a method Data Control (just need to add bindings code in backing bean to execute DC method). 2. Using invokeAction Executable :If the application is built with pages and no taskflows are involved, then this option can be taken into consideration.In the page definition of the page, add an invokeAction Executable and bind it to the method needed to be executed. 3. Using combination of Server and Client Listeners : If the page does not have any page definition, then to call a method in backing bean, this approach can be taken. In this, a serverListener would be added at the document level, which would be calling the method in backing bean. Along with this, a clientListener would be added with "load" type (i.e will be triggered when the page loads), which would queue a serverEvent to trigger the method. 4. Using Page Phase Listener :This should be the last resort. Care should be taken when using this approach since the Phase Listener would be called for each request sent by the client.Zeeshan Baig's blog covers this scenario.

  Read the article

• An Epic Question "How to call a method when the page loads"

  - by Arunkumar Ramamoorthy

  Quite often, there comes a question in OTN, with different subjects, all meaning "How to call a method when my ADF page loads?". More often, people tend to take the approach of ADF Phase Listener by overriding before/afterPhase methods.In this blog, we will go through different options in achieving it.1. Method Call Activity as default activity in Taskflow :If the application is built with taskflows, then this is the best suited approach to take. 1.a. Calling a Data Control Method :To call a Data Control method (ex: A method in AMImpl exposed as client interface), simply Drag and Drop the method as Default Method Call Activity, then draw a control flow case from the method to your page. Once after this, drop the taskflow as region in main page. When we run the main page, the Method Call Activity would be called first, and then the page will be rendered.1.b. Calling a Method in Backing Bean: To call a method in the backing bean before pageload, we can follow the similar approach as above. Instead of binding the Method Call Activity to an action/method binding in pagedef, we bind to the method. Insert a Method Call Activity (and make it as default) from the Component Palette. Double click on to select a method to bind. This approach can also be used, to perform some action in backing bean along with calling a method Data Control (just need to add bindings code in backing bean to execute DC method). 2. Using invokeAction Executable :If the application is built with pages and no taskflows are involved, then this option can be taken into consideration.In the page definition of the page, add an invokeAction Executable and bind it to the method needed to be executed. 3. Using combination of Server and Client Listeners : If the page does not have any page definition, then to call a method in backing bean, this approach can be taken. In this, a serverListener would be added at the document level, which would be calling the method in backing bean. Along with this, a clientListener would be added with "load" type (i.e will be triggered when the page loads), which would queue a serverEvent to trigger the method. 4. Using Page Phase Listener :This should be the last resort. Care should be taken when using this approach since the Phase Listener would be called for each request sent by the client.Zeeshan Baig's blog covers this scenario.

  Read the article

< Previous Page | 139 140 141 142 143 144 145 146 147 148 149 150  | Next Page >