Search Results

Search found 6839 results on 274 pages for 'functional tests'.

Page 143/274 | < Previous Page | 139 140 141 142 143 144 145 146 147 148 149 150  | Next Page >

  • My computer freezes irregurarly

    - by Manhim
    My computer started to freeze at irregular times for 3 weeks now. What happens My computer freezes, the video stops. (No graphic glitches, it just stops) Sound keeps playing up to some time (Usually 10-30 seconds) then stops playing. Sometimes, randomly, the screen on my G-15 keyboard flickers and I see caracters not at the right places. Usually happens for about 1-2 seconds and a bit before my computer freezes. I have to keep the power button pressed for 4 seconds to shut my computer down. I still hear my hard drives and fans working. Sometimes it works with no problems for a full day, some other times it just keeps freezing each time I restart my computer and I have to leave it for the rest of the day. Sometimes my mouse freezes for a fraction of a second (Like 0.01 to 0.2 seconds) quite randomly, usually before it freezes. No errors spotted by the "Action center" unlike when I had problems with my last video card on this system (Driver errors). My G-15 LCD screen also freezes. What I did so far I have had similar problems in the past and I had changed my hard drive (It was faulty), so I tested my software RAID-0 array and it was faulty so I changed it. (I reinstalled Windows 7 with this part). I also tested with unplugging my secondary hard drive. My CPU was running at about 100 degree Celsius, I removed the dust between the fans and the heatsink and it's now between 50-60. I ran a CPU stress-test and it didn't freeze during the tests (using Prime95 on all cores) Ran a memory test (using memtest86+) for a single pass and there were no errors. Ran a GPU stress test with ati-tools and furmark and it didn't freeze during the tests. (No artefacts either) I had troubles with my graphic card when I got it, but I think that it got fixed with a driver update. I checked the voltages in my BIOS setup and they all seemed ok (±0.2 I think). I have ran on the computer without problems with Fedora 15 on an external hard drive (Appart that it couldn't load Gnome 3 and was reverting to Gnome 2, didn't want to install drivers since I use it on multiple computers) I used it to backup my files from the raid array to my 1TB hard drive for the reinstallation of Windows. (So the crashes only happenned on Windows) [The external hard drive is plugged directly on a SATA port] I contacted EVGA (My graphic card vendor) and pointed them on this question, I'm looking for an answer. Ran sensors on Fedora 15 and got this output: http://pastebin.com/0BHJnAvu When it happens When I play video games (Mostly) When I play flash games (Second most) When I'm looking at my desktop background (It rarely happens when I have a window open, but it does, sometimes) Specs Windows Seven x64 Home Premium Motherboard: M2N-SLI Deluxe CPU: AMD Phenom 9950 x2 @ 2.6GHz Memory: Kingston 4x2GB Dual Channel (Pretty basic memory sticks) Hard drives: Was 2x250GB (Western digital caviar) in raid-0 + 1TB (WD caviar black), I replaced the raid array with a 750GB (WD caviar black) [Yes I removed the array from the raid configurations] 750W Power supply No overcloking. Ever. There have been some power-downs like 4-5 weeks ago, but the problem didn't start immediately after. (I wasn't home, so my computer got shut-down) My current to-try list Change the thermal paste on my CPU. Change my graphic card with a temporary one and stress the computer. Change my power supply. In this situation, how can I successfully pin-point the current hardware problem? (If it's a hardware problem) Because I don't really have the budget to just forget and replace everything. I also don't really have hardware to test-replace current hardware.

    Read the article

  • How to create limited user accounts in Linux

    - by James Willson
    I want to create a user account for each of the key programs installed on my debian server. For example, for the following programs: Tomcat Nginx Supervisor PostgreSQL This seems to be recommended based on my reading online. However, I want to restrict these user accounts as much as possible, so that they dont have a shell login, dont have access to the other programs and are as limited as possible but still functional. Would anyone mind telling me how this could be achieved? My reading so far suggests this: echo "/usr/sbin/nologin" /etc/shells useradd -s /usr/sbin/nologin tomcat But I think there may be a more complete way of doing it. EDIT: I'm using debian squeeze

    Read the article

  • How to add exception for backup MX to tumgreyspf?

    - by Waleed Hamra
    I have an Ubuntu raring server running postfix/dovecot as an email server, with tumgreyspf doing greylisting and SPF checks. My problem is that I also have a backup MX server, that is supposed to store my emails temporarily, should my main server ever fails. It usually rejects receiving emails if it finds the main server online and functional. The problem is when it does need to do its job, tumgreyspf rejects all emails from the backup MX with an error like this: Jun 27 16:18:13 hamra postfix/smtpd[28732]: NOQUEUE: reject: RCPT from mxbackup.mydomain.com[x.x.x.x]: 550 5.7.1 <[email protected]>: Recipient address rejected: QUEUE_ID="" SPF Reports: 'SPF fail - not authorized'; from=<[email protected]> to=<[email protected]> proto=SMTP helo=<mxbackup.mydomain.com> any ideas?

    Read the article

  • What are these? Are they broken?

    - by Chris Nielsen
    Please excuse the poor image quality: What are the components that I've circled in red? The ones on the left look whole and solid. The ones on the right have cracked tops, and although this picture doesn't show it, there are small brown threads coming out of the top. Are the cracked ones broken, or is that supposed to happen? If they ARE broken, is this something I should worry about? This is a video card, and it appears to be fully functional: I'm using it while writing this post.

    Read the article

  • Upgrading Active Directory from 2000 to 2008

    - by Doug
    Our config is currently: 1 Windows 2000 domain controller running ISA2000, dhcp, dns 1 Windows 2003 domain controller as main file server, prob cert server as well, dhcp, dns 1 Windows 2008/Exchange2010 domain controller as Exchange server, DHCP,DNS Currently getting FRS errors on files server journalwrap error Currently getting FRS errors on othe DC's can't replicate from above Exchange DC holds Schema, rid,pdc, and infastructure roles File Server holds Domain namaing operation master role WOW, I didn't set this up, just inherited it. Am I right to assume that fixing the FRS errors is #1, what do I need to do for that? set enable journalwrap auto restore in registry? Demote W2000 domain controller, should that have any implications for ISA? We have Forefront to be deployed but that's another day Transfer Domain Nameing Role to Exchange server (I know or think having an Exchange server as DC isn't best practive) We will be getting another server W2008 to replace current file server and I thought it could takeover all roles once deployed Demote W2k3 file server and then raise functional domain level to 2008 Am I missing anything other that the sense to walk away? Thanks

    Read the article

  • Speeding up Connection Between Computer and Wireless/Bridged Router

    - by Justian Meyer
    Hey everyone, I looked through other questions, but didn't find useful responses. Our main computer has a dl speed of 6 Mbps, but some of our other computers are getting only 40-200 Kb! The router is wireless, but all computers are connected using a Netgear Wall-Plugged Bridge XE102, which transmits information via the building's powerline. It can't be the hardware itself, however, because some computers still manage decent speeds. The computers afflicted are running on Microsoft XP Service Packs 2 and 3, but so are computers that are totally functional. These speeds severely impede on productivity and are excruciatingly frustrating when trying to cram in time in the early hours. Could it be an issue with the computer? Location? Router? Many thanks in advance, Justian

    Read the article

  • Windows won't ctrl+c and ctrl+v

    - by Thomasstuck
    Using Ctrl+C and V I am unable to copy or paste anything. I have tried many different applications and still no luck. I am able to copy/paste via the shortcut menu when you right click the mouse. Ctrl+F works which means the Ctrl button is functional. I've tried restoring to an earlier restore point. I also ran SFC /SCANNOW (System File Checker) which did not find any errors. Ctrl+C and then right click and paste doesn't work either. I have tried with external and internal keyboard and still no luck. I've clicked on all the relevant search results from Google but none of them work for me. Does anyone know what may be causing this issue and how I can correct it? This problem comes and goes at random times.

    Read the article

  • GNOME/KDE Linux entirely in RAM?

    - by František Žiacik
    Hi. I'd like to have very responsive linux but I also like modern, elegant and functional desktops like gnome or kde, not the lightweight ones like xfce or lxde. Once I tried PuppyLinux and was impressed by the responsivity when I clicked an application. In my Ubuntu, it bothers me much when I click chromium and must wait 5 seconds of disk flashing until main window appears. Or evolution or anything else. Is it possible to make GNOME or KDE run entirely in RAM like PuppyLinux (of course, I mean frequently used applications and services, not all) if you have enough of it? I don't care if boot time is longer. I tried using "preload" but it didn't help much.

    Read the article

  • ntbackup workalike for adhoc full backups in Windows 7 thats free and preferably open source

    - by Justin Dearing
    On windows 2000 and XP machines I used to be able to do the following: ntbackup backup systemstate c: /f e:\backups\machineName\machineName-full+systemstate_200101206.bkf This gave me a full backup of the system that I could use to do a system restore, after doing a barebones OS install. Windows 7 has a great utility for regular backups with alerting and all that stuff. It does not seem to have command line support. I'd like a backup solution for my Windwos 7 systems that has the following features: Is free Is open source (preferebly) Works while the system is booted and leaves the system functional (clonezilla is great for offline backups, and I use that too) Gives me a backup that is suited for a full system restore or partial system restore (ruling out most imaging software even if they could work while the system is booted via some sort of shadow copy voodoo) Can work via the command line Compression would be nice, the ability to pipe output would be better.

    Read the article

  • ActiveDirectory - LDAP query for objectCategory unexpected results

    - by FinalizedFrustration
    AD is at 2003 functional level, some of our DC's are running Windows Server 2003, some are 2008, some are 2008 R2. When using the following query: (objectCategory=user) I do not expect to see any result where the objectCategory attribute is equal to 'CN=Person,CN=Schema,CN=Configuration,DC=Contoso' I expect only objects where the objectCategory attribute is equal to 'CN=User,CN=Schema,CN=Configuration,DC=Contoso' However, the query does indeed return all objects with the objectCategory attribute equal to 'CN=Person,CN=Schema,CN=Configuration,DC=Contoso' My question then is this: Why do I see the search results that I do? Does AD actively translate queries that include (objectCategory=user) to (objectCategory=Person)? I have looked at the schema definitions for both the Person and the User class, but I cannot see any reason for the query results as I am experiencing them. I know that the User class is a subclass of the organizationalPerson class, which is a subclass of Person, but I can't see an attribute value that would explain this translation.

    Read the article

  • Rosewill RSV-S5 and it's transferespeeds

    - by DoomStone
    I have just bought a Rosewill RSV-S5, I have installed 5x1,5Tb Western Digital Green disks in it. After that have I created a Raid5 on them all with the software that followed with the hardware. Not the raid it self works fine, but it is SLOW, I can only obtain a maximum of 25 MB/s, and if SABnzbd+ is downloading with 5 MB/s is it having a hard time streaming a normal DIVX (700 mb) movie. Is this normal or is there something wrong? Edit: should be able to handle 3 Gbps = 384 megabytes / second Edit 2: As you can see am I only downloading with 3,76 MB/s and I'm trying to watch V s02e08 (720p), but it is completely unwatchable, as I can see 30 sec, and the it buffers for 20 sec. Edit: Other information there might be required I'm running Windows Server 2008 R2, optimized for program performance. Windows is installed on a 60GB SSD. I have a 50 Mb/s internet connection and a 1 Gb/s LAN, all connected with Cat6 Ethernet cables. The MCE is using a Gigabyte EP35C-DS3R motherboard with 2 GB DDR2 ram. Edit 3: I have used chunk sizes for 128 KB Edit 4: I found this on newegg Pros: Enclosure for 5x2TB hard drive is fine. This is basically a rebranded San Digital TR5M-B product. For support Rosewill tells you to contact San Digital. No direct support from Silicon Image for the computer raid card. Cons: Includes computer Silicon Image 3132 raid card, extremely slow raid 5 write (our tests ~10MB/s). Compare to regular internal local drive write 30-60MB/s. We basically dumped the Sil3132 card and replaced with High Point RocketRaid 622 card for extra $69.99. Note for RR622, turn off ECRC (end to end CRC check) for card to work on IBM xserver. What took 12hrs to copy now took 2-3hrs. San Digital realized the problem and has the newer model TR5M-BP TowerRaid Plus that comes with High Point RocketRaid 622 card. Rosewill should discontinue this product and go with TR5M-BP. Could not get Silicon Image raid management software to work with complicated 2008R2 server with 10 NICs, application doesn't know how to talk to localhost port with all those NICs. No updates from Silicon Image and support from San Digital ignored. Gave up on Sil3132 card. Save yourself from a lot of headaches, get the RR622 card too if you are going to buy this product. Other Thoughts: The newer model is TR5M-BP TowerRaid Plus, comes with High Point RocketRaid 622 raid card for the PC instead of Silicon Image Sil3132. According to San Digital, raid 5 performance for Sil3132 read 80MB/s write 19MB/s, and RR622 read 154MB/s write 149MB/s. Our RR622 tests gave (8TB raid 5) write ~80-110MB/s copying 40GB file took 8mins. So I have now ordered a HighPoint RocketRAID 622 2P ext SATA III and hopes that it will solve my problems.

    Read the article

  • some keyboard keys not working properly

    - by surfmadpig
    I'm using Windows 7. All of a sudden, a couple of hours ago, this happened: My keyboard number keys [above the letters] stopped working properly, both as numbers and as symbols. Only 5 and 6 are functional. Also, I've noticed that the End key isn't working either, and perhaps a couple more from that group. I'm pretty sure it has something to do with those evil Sticky Keys/Filter Keys/ whatever those ease of access things are, BUT I've turned off all the ease of access keyboard options and nothing has changed. Is it possible that something is still turned on while I unchecked it? Are the on/off checkboxes to control WHEN it happens or IF it happens? I also tried rebooting and uninstalling/reinstalling keyboard from device manager, to no avail. It's certainly a software issue and not a hardware issue, as I've tried another keyboard and the problem persists. And, predictably enough, it's annoying. Any ideas?

    Read the article

  • Clipboard replacements (Ditto, ClipX) stopped working in Windows 7

    - by Bassam
    Over the past few days, I've noticed that the clipboard replacement application I use (Ditto) isn't working any more. Specifically, it isn't copying items to its list. It still shows the history of items copies before, but doesn't add any new items. I am still able to paste past items, so the program is still functional. It will work for a while after quitting and restarting the program, but then it will soon stop getting new items again. I've tried using ClipX, another clipboard replacement app, and that doesn't get new items either. This leads me to think this is a Windows problem. I'm on Windows 7, 64-bit. Is anyone else having this problem? Any ideas on what might be causing it? Update: I've found that if I Disconnect from the clipboard, then Connect to clipboard again, then it works for a while, but stops collecting items again after 15 mins.

    Read the article

  • Newbie: VirtualBox "no bootable medium found"

    - by Newton Falls
    My first foray into VM land so please excuse the stupidity expressed below. Running VirtualBox on Kubuntu 9.10 and trying to set up a VM running Windows 7. Windows 7 came installed and is functional as a dual-boot but I want to stay in kubuntu hence the VM. Received "Fatal: no bootable medium found" when trying to start a VM. Not surprising since VBox never gave me an option (that I recognized anyway) to tell it to look on the hard drive. I did not receive a CD of Windows 7 with the machine. How can I tell VirtualBox to grab what it needs from the hard drive? Or am I out of luck because I don't have a CD? Update: This might not be possible. The installed Windows 7 is useful only to pull the installation key. It is easier to just to download or get an ISO from a friend and enter in your own key.

    Read the article

  • Windows 7 - Wireless connection before login possible?

    - by EJ
    Is there a way for Windows 7 to connect to a wireless network before a user has logged in? I have found no good answers to this question elsewhere. Some say it should already be happening if I am using Windows' connection management (WLAN AutoConnect, formerly WirelessZero), but I am using that, and it is not. I can sit at the login screen for as long as you please and it will not connect (watching the router from a separate PC), moments after I login it will connect. Others have said that you need to use the manufacturer's connection management (not Windows'), and they can sometimes have the option for prelogin/prelogon connections, but I am using generic drivers. The device is a Netgear/Cisco WMP300N, with a Broadcom chipset. Netgear/Cisco and Broadcom all claim to not have drivers for Win7, but Win7 apparently comes with a functional driver.

    Read the article

  • Configure fallback redis server

    - by snøreven
    I am using redis as a cache server. Can I somehow configure multiple redis servers, that the cache is fully functional (read/write) even if some of them go offline? I looked into master-slave, but the problem I see there is, that if the master fails, and I allow writes to the slaves, they get overwritten once the master is up again. Now the master just serves the old data. The only solution I could come up was disabling write-to-disc, but that sucks as I loose everything if I have to restart the master. And I guess, slaves wouldn't be synced anymore if the master is gone.

    Read the article

  • some keyboard keys not working properly

    - by surfmadpig
    I'm using windows 7. All of a sudden, a couple of hours ago, this happened: My keyboard number keys [above the letters] stopped working properly, both as numbers and as symbols. Only 5 and 6 are functional. Also, I've noticed that the End key isn't working either, and perhaps a couple more from that group. I'm pretty sure it has something to do with those evil Sticky Keys/Filter Keys/ whatever those ease of access things are, BUT I've turned off all the ease of access keyboard options and nothing has changed. Is it possible that something is still turned on while I unchecked it? Are the on/off checkboxes to control WHEN it happens or IF it happens? I also tried rebooting and uninstalling/reinstalling keyboard from device manager, to no avail. It's certainly a software issue and not a hardware issue, as I've tried another keyboard and the problem persists. And, predictably enough, it's annoying. Any ideas?

    Read the article

  • XenServer 5.6.1-fp1. Can't get network working

    - by casey_miller
    I have a PC where XenServer 5.6.1 fp-1 has been successfully installed. I've manually set the network settings: 192.168.1.50 255.255.255.0 192.168.1.1 but it's set to xenbr0 iface. While eth0 is empty. When I click on "Configure Management Inteface" it shows that eth0 is connected. But when I ping a default gateway (which is 100% should be accessible) it fails. I used to another shell (Alt+F3) and logged as root. I also failed to ping. with both: ping -I eth0 192.168.1.1 and ping -I xenbr0 192.168.1.1 Be assured that: Cable works Ethernet adapter is 100% functional (prev OS was Ubuntu it was working) There is no firewall rule to deny anything. (everything is allowed) So the question is: What is a problem???

    Read the article

  • Forums that compell one to read? [closed]

    - by Alex
    I want to create a forum for a very specific, somewhat fight-club-like area of information. The participants need to be unique, not people I know. To be precise, it needs to be an entirely random set of participants. To do this I am going on the assumption that whatever a potential viewer sees when he visits this particular domain he will be COMPELLED to go further. He feels an intense urge within him to read more. I need forum software that will evoke this feeling regardless of the content. Minimal and aesthetically fluid and functional. It must have.. zen.. What are my options?

    Read the article

  • Samba 4 or Active Directory

    - by Jon Rhoades
    Now that Samba 4 has finally been released we find ourselves in new position of having a choice of of either upgrading our Samba 3 domain to either a Samba 4 domain on Linux or a Windows AD domain on Windows 2012. Given that we are equally expert at managing Windows and Linux servers, is there any reason not to use Samba 4 over AD on Windows; specifically: Are there functional differences from a Windows/OS X client perspective? Are there issues with other services that use AD, such as storage appliances that use AD/Kerberos for authentication/authorisation. Will the Microsoft "System Centre" suite of tools and other similar products work seamlessly? How will Samba 4 handle AD's Multimaster DC model and FMSO roles. Are there any other issues to be aware of, such as vendor support?

    Read the article

  • DRBD with MySQL

    - by tdimmig
    Question about using DRBD to provide HA for MySQL. I need to be sure that my backup MySQL instance is always going to be in a functional state when the failover occurs. What happens, for example, if the primary dies part way through committing a transaction? Are we going to end up with data copied to the secondary that mysql can't handle? Or, what if the network goes away while the two are syncing, and not all of the data makes it across. It seems like it's possible to get into a state where incomplete data on the secondary makes it impossible for mysql to start up and read the database. Am I missing something?

    Read the article

  • Simplification of Apache+Subversion multidirectory configuration

    - by Reinderien
    Hello. With your excellent advice, I've finally pieced together this functional Apache configuration for my Subversion service: # Macro to make an SVN repo set <Macro SVNDir $user> <Location /svn/$user> # Mandatory HTTPS, log in using Active Domain SSLRequireSSL AuthPAM_Enabled on AuthType Basic AuthBasicAuthoritative off AuthName "PAM" Require user AD\$user # Needed to squash spurious error messages AuthUserFile /dev/null # SVN stuff DAV svn SVNParentPath /var/www/svn/$user </Location> </Macro> # List of accounts Use SVNDir user1 Use SVNDir user2 # ... It works, but it isn't optimal. I'd like to somehow redo this so that it can just scan the list of directories in /var/www/svn and automatically do this for each of them. Is that possible? Thanks.

    Read the article

  • Server installation logging / logbook / diary?

    - by The MYYN
    Are there some ways field-tested ways to keep a kind of logbook for a server? Including: software installations (and de-installations) custom configurations (e.g. of a webserver, ssh daemon, etc.) personal notes The big picture. I am preparing a server and would like to extensively document the state and how it was established over time, so that a new person can easily see, what's going on and why. The setup is not too complicated, but I would like to do it anyway. I once used something like Maintain /etc with mercurial on Debian and it was nice, but I am looking for a little more flexible solution. Addendum: So I am interested in logging and documentation first. In an ideal world however, I would like to have a command, which in a few steps would take me from a bare newly installed unix system to a functional environment with all the components setup and in place by the means of, say an 'executable' log. But that would be very ideal, I imagine.

    Read the article

  • Hard Disk recovery

    - by Shaihi
    I have 3 disks of the same type model and year of production. All the disks were used part of a generic solution of an IBM server solution. My problem is that all 3 disks suffered the same malfunction at the same exact time and are now dis-functional. I went to two different expert's laboratories and got the same answer: To recover the data they need another identical disk from which they can take spare parts. Can my case really be that clinical? Anyway, I am not sure if this question belongs to this forum, but I am looking to buy the following disk: IIBM ESERVER XSERIES IBM P/N 24P3707 IBM FRU 24P3708 146.8GB USCSI 10K RPM PART NOMBER 9V2005-027 I already bought a disk with the same part number, but the labs said that apparently I need a disk that was manufactured in the same factory. That means that all the numbers have to be exactly the same. If anybody know where I can purchase such a disk (the information on the lost disks is really important to me), please tell me the place.

    Read the article

  • AD password not synchronising properly

    - by Kaczmar
    I have 600+ users in AD, but only one causes me trouble. The problem is I can reset his password from AD, he can then log in to his machine. After that he would like to change his password from Windows 7, and proceeds without errors. Logs out or locks the workstation but cannot access it again using either old or new password. So I have to reset it again and he can only use the one I provide for him. All our machines are in the same physical location in the same subnet. Functional level is 2003. I'm totally out of ideas. I could create him new user account, but I'd possibly like to know what causes this. I can only suspect some sort of synchronisation problems but other accounts work fine, and I don't know how to dig deeper into this. Thanks, Piotr

    Read the article

< Previous Page | 139 140 141 142 143 144 145 146 147 148 149 150  | Next Page >