Search Results

Search found 19021 results on 761 pages for 'general info'.

Page 143/761 | < Previous Page | 139 140 141 142 143 144 145 146 147 148 149 150  | Next Page >

  • Radeon HD 6850 VMware 3D Support?

    - by Matt
    I'm a new Ubuntu user (new to all of linux actually). I've installed Ubuntu 11.10 x64 and have been enjoying it, but I wanted to see how it would perform using VMware for small time gaming since I find dual booting too much of a nuisance to even bother using Ubuntu at all (sorry!). I have an Asus EAH6850 DirectCU Radeon HD 6850 graphics card and I've installed the additional ATI/AMD proprietary FGLRX graphics driver, but when I open a Windows XP 32bit machine I installed through VMware, I get this message: "The GPU driver currently installed on this host may cause issues with VMware products. If you notice any issues please disable the 3D support in the affected virtual machines." I still have 3D capabilities in the VM but they are very very choppy even running the DX tests (the spinning cube). I've seen people on youtube and other forums saying that since the new 3D acceleration in VMware 8 gaming is very possible through VMs (and I've seen them running the DX tests with the spinning cube very smoothly). I'm wondering if my graphics card isn't fully supported or if I have installed it wrong. Also when I check system info (on the host Ubuntu machine) it says "Graphics VESA:BARTS" Should my Radeon HD 6850 be showing up there? The rest of my basic system info i5 2500k 8GB 1600MHz memory Guest is running with access to all 4 cores of processor and 3gb memory assigned.

    Read the article

  • In agile environment, how is bug tracking and iteration tracking consolidated.

    - by DXM
    This topic stemmed from my other question about management-imposed waterfall-like schedule. From the responses in the other thread, I gathered this much about what is generally advised: Each story should be completed with no bugs. Story is not closed until all bugs have been addressed. No news there and I think we can all agree with this. If at a later date QA (or worse yet a customer) finds a bug, the report goes into a bug tracking database and also becomes a story which should be prioritized just like all other work. Does this sum up general handling of bugs in agile environment? If yes, the part I'm curious about is how do teams handle tracking in two different systems? (unless most teams don't have different systems). I've read a lot of advice (including Joel's blog) on software development in general and specifically on importance of a good bug tracking tool. At the same time when you read books on agile methodology, none of them seem to cover this topic because in "pure" agile, you finish iteration with no bugs. Feels like there's a hole there somewhere. So how do real teams operate? To track iterations you'd use (whiteboard, Rally...), to track bugs you'd use something from another set of products (if you are lucky enough, you might even get stuck with HP Quality Center). Should there be 2 separate systems? If they are separate, do teams spend time creating import/sync functionality between them? What have you done in your company? Is bug tracking software even used? Or do you just go straight to creating a story?

    Read the article

  • iOS chat application design, sending/relaying the message over to the end user

    - by AyBayBay
    I have a design question. Let us say you were tasked with building a chat application, specifically for iOS (iOS Chat Application). For simplicity let us say you can only chat with one person at a time (no group chat functionality). How then can you achieve sending a message directly to an end user from phone A to phone B? Obviously there is a web service layer with some API calls. One of the API calls available will be startChat(). After starting a chat, when you send a message, you make another async call, let us call it sendMessage() and pass in a string with your message. Once it goes to the web service layer, the message gets stored in a database. Here is where I am currently stuck. After the message gets sent to the web service layer, how do we then achieve sending/relaying the message over to the end user? Should the web server send out a message to the end user and notify them, or should each client call a receiveMessage() method periodically, and if the server side has some info for them it can then respond with that info? Finally, how can we handle the case in which the user you are trying to send a message to is offline? How can we make sure the end user gets the packet when he moves back to an area with signal?

    Read the article

  • How to connect two ubuntu computers with ethernet cable

    - by Lukasz Zaroda
    I'm trying to connect with ethernet cable two computers - desktop and laptop. What I want to do is transfer a lot of data from one to another. The problem is that I'm doing everything from: How to network two Ubuntu computers using ethernet (without a router)? But after that, ping always gives me "Destination host unreachable". I was searching a while but couldn't figure out what is a reason it doesn't work, maybe it's something about my devices or maybe someone will have another idea. Ethernet cable I got with my router. There is a text printed on it: Aurit Data Cable Cat.5 UTP 26AWG 4PAIR AWM PUC 75°C EIA/TIA 568B It's connecting now my desktop to router, so I can send this question. My desktop: System: Ubuntu 12.04 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03) "ethtool -i eth0" output: driver: r8169 version: 2.3LK-NAPI firmware-version: rtl_nic/rtl8168d-1.fw bus-info: 0000:01:00.0 supports-statistics: yes supports-test: no supports-eeprom-access: no supports-register-dump: yes My laptop: System: Ubuntu 14.04 Ethernet controller: Qualcomm Atheros AR8162 Fast Ethernet (rev 08) "ethtool -i eth0" output: driver: alx version: firmware-version: bus-info: 0000:01:00.0 supports-statistics: no supports-test: no supports-eeprom-access: no supports-register-dump: no supports-priv-flags: no My iptables are accepting everything. Any ideas why I cannot reach other computer?

    Read the article

  • CodePlex Daily Summary for Friday, October 18, 2013

    CodePlex Daily Summary for Friday, October 18, 2013Popular ReleasesVoya Media: Voya Media v. 1.2.255: Voya Media is free, open-source and provides one central place to play and organize all your music, pictures and videos. Voya Media | Twitter | Facebook | Google+ Features: Scans disk drives and network shares for valid media files. Generates playlist tags based on directory names. Supports MP3 tags and cover images. Supports built-in and external SRT/SUB subtitles. Gets TV Show episode details from the tvrage.com API. Gets Movie details from the themoviedb.org API. Supports Med...Aphid: Aphid 0.1.0.17 Alpha: Added several samples Fixed + operator bugpatterns & practices - Windows Azure Guidance: Cloud Design Patterns: 1st drop of Cloud Design Patterns project. It contains 14 patterns with 6 related guidance.Media Companion: Media Companion MC3.582b: New* Both - Added 'An' as option to ignore in title * Movie - Renaming - added %Z - Sorttitle to Legend * Movie - Renaming - added %O - Audio Channels to Legend * Movie - Remove a poster source from priority list. Reset List back to defaults. * Made Media Companion truly portable application. Fixed* Movie - browse for Poster Or Fanart, allows for jpg, tbn, png and bmp images * Movie - Alt Fanart Browser - Url or Browse window now fully visible. * Movie - Manual renaming checks if 'Use Fold...Json.NET: Json.NET 5.0 Release 8: Fix - Fixed not writing string quotes when QuoteName is falsePowerShell Community Extensions: 3.1 Production: PowerShell Community Extensions 3.1 Release NotesOct 17, 2013 This version of PSCX supports Windows PowerShell 3.0 and 4.0 See the ReleaseNotes.txt download above for more information.SQL Power Doc: Version 1.0.2.1: Misc. bug fixes Added logic to resolve members of a Windows Group server login Added columns to Excel workbooks to show definitions for server permissions, server roles, database permissions, and database rolesNB_Store - Free DotNetNuke Ecommerce Catalog Module: NB_Store v2.3.8 Rel1: v2.3.8 Is now DNN6 and DNN7 compatible NOTE: NB_Store v2.3.8 is NOT compatible with DNN5. SOURCE CODE : https://github.com/leedavi/NB_Store (Source code has been moved to GitHub, due to issues with codeplex SVN and the inability to move easily to GIT on codeplex)Social Network Importer for NodeXL: SocialNetImporter(v.1.9): This new version includes: - Download latest status update and use it as vertex tooltip - Limit the timelines to parse to me, my friends or both - Fixed some reported bugs about the fan page and group importer - Fixed the login bug reported latelyTerrariViewer: TerrariViewer v7.1 [Terraria Inventory Editor]: You can now backspace in number fields Items added in 1.2.0.3 no longer corrupt player files Buff durations capped at 9999999 Item stacks capped at 9999999 Version info added Prefix IDs corrected Shoe and Eye color box are now properly clickable Moved Bank and Safe into their own tab Users will now be notified of new updatesPython Tools for Visual Studio: 2.0: PTVS 2.0 We’re pleased to announce the release of Python Tools for Visual Studio 2.0 RTM. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including CPython/IronPython, Edit/Intellisense/Debug/Profile, Cloud, IPython, and cross platform and cross language debugging support. QUICK VIDEO OVERVIEW For a quick overview of the general IDE experience, please watch this v...Collection Commander for Configuration Manager 2012: CMCollCtr 1.0.0: Change log: - MSI Setup - UI Improved - CM12 Console integration - New Powershell code snippets - Client Center IntegrationSandcastle Help File Builder: SHFB v1.9.8.0 with Visual Studio Package: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This new release contains bug fixes and feature enhancements. There are some potential breaking changes in this release as some features of the Help File Builder have been moved into...Fast YouTube Downloader: YouTube Downloader 2.2.0: YouTube Downloader 2.2.0VidCoder: 1.5.8 Beta: Added hardware acceleration options: Bicubic OpenCL scaling algorithm, QSV decoding/encoding and DXVA decoding. Updated HandBrake core to SVN 5834. Updated VidCoder setup icon. Fixed crash when choosing the mp4v2 container on x86 and opening on x64. Warning: the hardware acceleration features require specific hardware or file types to work correctly: QSV: Need an Intel processor that supports Quick Sync Video encoding, with a monitor hooked up to the Intel HD Graphics output and the lat...ASP.net MVC Awesome - jQuery Ajax Helpers: 3.5.2: version 3.5.2 - fix for setting single value to multivalue controls - datepicker min max date offset fix - html encoding for keys fix - enable Column.ClientFormatFunc to be a function call that will return a function version 3.5.1 - fixed html attributes rendering - fixed loading animation rendering - css improvements version 3.5 ========================== - autosize for all popups ( can be turned off by calling in js awe.autoSize = false ) - added Parent, Paremeter extensions ...Wsus Package Publisher: Release v1.3.1310.12: Allow the Update Creation Wizard to be set in full screen mode. Fix a bug which prevent WPP to Reset Remote Sus Client ID. Change the behavior of links in the Update Detail Viewer. Left-Click to open, Right-Click to copy to the Clipboard.WDTVHubGen - Adds Metadata, thumbnails and subtitles to WDTV Live Hubs: WDTVHubGen.v2.1.6.maint: I think this covers all of the issues. new additions: fixed the thumbnail problem for backgrounds. general clean up and error checking. need to get this put through the wringer and all feedback is welcome.BIDS Helper: BIDS Helper 1.6.4: This BIDS Helper release brings the following new features and fixes: New Features: A new Bus Matrix style report option when you run the Printer Friendly Dimension Usage report for an SSAS cube. The Biml engine is now fully in sync with the supported subset of Varigence Mist 3.4. This includes a large number of language enhancements, bugfixes, and project deployment support. Fixed Issues: Fixed Biml execution for project connections fixing a bug with Tabular Translations Editor not a...Free language translator and file converter: Free Language Translator 3.4: fixes for new version look up.New ProjectsA Program to Calculate the Sum of Two Numbers: Dennis Gaya - University of HertfordshireAllow users to change their Active Directory password from SharePoint 2013: Allow users to change their Active Directory password from SharePoint 2013 user menu contextAutoCAD Code Pack: AutoCADCodePack is a powerful library that help you to develop AutoCAD plugins using the AutoCAD .NET API.Core Engine: A game engine, written by engineers, for engineers.EmeraldForum: A simple forumFcdbas: FcdbasFreedom: ...High School Behaviour Log: A web based tool for recording student detentions, behaviour issues as well as referrals and positive behaviour. Integrated with school's SIMS.net MIS system.htmlcxx unicode version: thanks for Davi de Castro Reis and Robson Braga Ara?o's work. also thanks for Kasper Peeters 's tree.hhLets Learn DirectX 11.1 Series: Lets Learn DirectX 11.1 is a project run by Ernest Loveland to make knowledge about DirectX 11.1 development more public and freely available.Migrate CPPUnit to VS2013: migrate CPPUnit to VS2013Poll System: Poll system for educational purposePort Layer: ????????,???????R.M.B: JUST XIXIRecetas_LosBorbotones: Recetas Los BorbotonesScrolltastic-Skin: Imagine A Free DotNetNuke responsive Skin, Which Will Make Your Wishes Come True. Sharepoint and web service: This is Sharepoint 2010 project, after deploy it, you can use javascript (ajax) to access sharepoint list, call a custom web service. Everything are very easy!SourceSareProject: 00TestWebApi: WebApi serviceTFSBuildMonitor: Application that in its current shape let you monitor build queues and finished builds in an easier way than what is possible throug the built in Build ExplorerTigerProjects: This project is to create a online RSS reader similar as Google ReaderVottReader: It is project simple reader and viewer for http://vott.ru site.WinFormStudy: C#??

    Read the article

  • Are certain problems solved more elegantly with AOP?

    - by Winston Ewert
    I've come across the idea of Aspect Oriented Programming, and I have some concerns with it. The basic idea seems to be that we want to take cross-cutting concerns which aren't well modularized using object and modularize them. That is all very fine and well. But the implementation of AOP seems to be that of modifying code from outside of the module. So, for example, an aspect could be written that changes what happens when a particular object is passed as a parameter in a function. This seems to go directly against the idea of modules. I should not be able to modify a module's behavior from outside of that module, otherwise the whole point of modules are overturned. But aspects seem to be doing exactly that! Basically, aspects seems to be a form of code patching. It may useful for some quick hacks; but, as a general principle perhaps its not something you want to do. Aspect Oriented Programming seems to me taking a bad practice and raising to a general design principle. Is AOP a good practice? Are certain programming problems solved more elegantly with AOP?

    Read the article

  • Synchronous vs. asynchronous for publish subscribe communication between JavaScript objects

    - by natlee75
    I implemented the publish subscribe pattern in a JavaScript module to be used by entirely client-side oriented JavaScript objects. This module has nothing to do with client-server communications in any way, shape or form. My question is whether it's better for the publish method in such a module to be synchronous or asynchronous, and why. As a very simplified example let's say I'm building a custom UI for an HTML5 video player widget: One of my modules is the "video" module that contains the VIDEO element and handles the various features and events associated with that element. This would probably have a namespace something like "widgets.player.video." Another is the "controls" module that has the various buttons - play, pause, volume, scrub, fullscreen, etc. This might have a namespace along the lines of "widgets.player.controls." These two modules are children of a parent "player" module ("widgets.player" ??), and as such would have no inherent knowledge of each other when instantiated as children of the "player" object. The "controls" elements would obviously need to be able to effect some changes on the video (click "Play" and the video should play), and vice versa (video's "timeUpdate" event fires and the visual display of the current time in the controls should update). I could tightly couple these modules and pass references to each other, but I'd rather take a more loosely coupled approach by setting up a pubsub type module that both can subscribe to and publish from. SO (thanks for bearing with me) in this kind of a scenario is there an advantage one way or another for synchronous publication versus asynchronous publication? I've seen some solutions posted online that allow for either/or with a boolean flag whereas others automatically do it asynchronously. I haven't personally seen an implementation that just automatically goes with synchronous publication... is this because there's no advantage to it? I know that I can accomplish this with features provided by jQuery, but it seems that there may be too much overhead involved here. The publish subscribe pattern can be implemented with relatively lightweight code designed specifically for this particular purpose so I'd rather go with that then a more general purpose eventing system like jQuery's (which I'll use for more general eventing needs :-).

    Read the article

  • MSDN Live 2010 &ndash; Delivered : 24 sessions (4 x 6) on Visual Studio and Team Foundation Server

    - by terje
    We (Mikael Nitell and me) got a whole track on the Norwegian MSDN Live tour this year.  We did these as a pair, and covered 4 cities over 4 days, 6 sessions per day, taking 8 hours to come through it.  The Islandic volcano made the travels a bit rough, but we managed 6 flights out of 8. The first one had to go by van instead, 7-8 hour drive each way together with other MSDN Live presenters – a memorable tour! Oslo was the absolute top point.  We had to change hall to a bigger one. People were crowding, and even the big hall was packed!  The presentations were mostly based on demos, but we had a few slides as well.  They have been uploaded to my SkyDrive.  Info to aliens – some of the text may be Norwegian. The sessions were as follows: Overview of news in Visual Studio and Team Foundation server 2010 Ensuring Quality with VS/TFS 2010 Releasing products with VS/TFS 2010 No More No Repro with VS/TFS 2010 Performance Testing and Parallel Programming with VS/TFS 2010 Migrating to VS/TFS 2010 Tips, tricks, news and some best practices with VS/TFS 2010   In the coming days, I will post up examples from the demos too, with explanations of how they are intended to work. These entries will also contain stuff we had to remove from the actual presentations due to the time constraints. We managed to create recordings of two of the sessions, which will be uploaded to Channel 9 by Microsoft, afaik.   I will update this blog with information about exact locations when that is done. Also note we’re (read:Osiris Data AS) running both Upgrade and Deep Dive courses  on VS/TFS 2010 now in May.  Please look here for more info. If you want to be informed, follow me on Twitter.  All blog entries will be announced on twitter.

    Read the article

  • Can't install or update Ubuntu after using parameter acpi_osi = Linux

    - by Lucas Leitão
    I recently had an issue with my acer 4736z notebook because I was having a blank screen after booting the OS, then someone told me to use the parameter GRUB_CMDLINE_LINUX_DEFAULT = "quiet splash acpi_osi = Linux" after quiet splash inside the grub. It worked for me, but since then I can't install a thing or update anything on Linux because it says Removing linux-image-extra-3.5.0-17-generic ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.5.0-17-generic /boot/vmlinuz-3.5.0-17-generic update-initramfs: Deleting /boot/initrd.img-3.5.0-17-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.5.0-17-generic /boot/vmlinuz-3.5.0-17-generic /usr/sbin/grub-mkconfig: 11: /etc/default/grub: GRUB_CMDLINE_LINUX_DEFAULT: not found run-parts: /etc/kernel/postrm.d/zz-update-grub exited with return code 127 Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/info/linux-image-extra-3.5.0-17-generic.postrm line 328. dpkg: erro ao processar linux-image-extra-3.5.0-17-generic (--remove): sub-processo script post-removal instalado retornou estado de saída de erro 1 Removendo linux-image-3.5.0-17-generic ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.5.0-17-generic /boot/vmlinuz-3.5.0-17-generic update-initramfs: Deleting /boot/initrd.img-3.5.0-17-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.5.0-17-generic /boot/vmlinuz-3.5.0-17-generic /usr/sbin/grub-mkconfig: 11: /etc/default/grub: GRUB_CMDLINE_LINUX_DEFAULT: not found run-parts: /etc/kernel/postrm.d/zz-update-grub exited with return code 127 Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/info/linux-image-3.5.0-17-generic.postrm line 328. dpkg: erro ao processar linux-image-3.5.0-17-generic (--remove): sub-processo script post-removal instalado retornou estado de saída de erro 1 Erros foram encontrados durante o processamento de: linux-image-extra-3.5.0-17-generic linux-image-3.5.0-17-generic E: Sub-process /usr/bin/dpkg returned an error code (1) I already tried to remove older kernels but it gives me the same message. Do you have a clue about what should I do?

    Read the article

  • Missing driver ASUS PCE-N53 11n N600 PCI-E Adapter

    - by oyse
    I have problems with getting an Asus PCE-N53 11n N600 PCI-E Adapter card to work on my desktop computer. As far as I can tell no drivers are installed for the card. I know I can manually download the drivers directly from Asus, but I would rather not go that route. If there are anyone that knows about any packages or other things I can do to make this work would be much appreciated. Some systems details: $ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 12.04.1 LTS Release: 12.04 Codename: precise $ sudo lshw -C network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 06 serial: d4:3d:7e:03:b9:1d size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168e-3_0.0.4 03/27/12 ip=192.168.0.173 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:43 ioport:d000(size=256) memory:f2104000-f2104fff memory:f2100000-f2103fff *-network UNCLAIMED description: Network controller product: Ralink corp. vendor: Ralink corp. physical id: 0 bus info: pci@0000:04:00.0 version: 00 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f7100000-f710ffff $ lsmod Module Size Used by nvidia 12319264 51 vesafb 13844 1 snd_hda_codec_hdmi 32474 1 joydev 17693 0 bnep 18281 2 rfcomm 47604 0 bluetooth 180104 10 bnep,rfcomm snd_hda_codec_realtek 224173 1 snd_seq_midi 13324 0 ppdev 17113 0 snd_rawmidi 30748 1 snd_seq_midi usbhid 47199 0 hid 99559 1 usbhid nouveau 774641 0 parport_pc 32866 1 snd_hda_intel 33773 5 ttm 76949 1 nouveau snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel drm_kms_helper 46978 1 nouveau drm 242038 3 nouveau,ttm,drm_kms_helper snd_seq_midi_event 14899 1 snd_seq_midi snd_hwdep 13668 1 snd_hda_codec snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event i2c_algo_bit 13423 1 nouveau mxm_wmi 12979 1 nouveau wmi 19256 1 mxm_wmi mac_hid 13253 0 snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec psmouse 97362 0 video 19596 1 nouveau snd_timer 29990 2 snd_seq,snd_pcm snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78855 20 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_rawmidi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq,snd_pcm,snd_timer,snd_seq_device serio_raw 13211 0 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm mei 41616 0 lp 17799 0 parport 46562 3 ppdev,parport_pc,lp r8169 62099 0

    Read the article

  • 1.5 TB USB Drive failed to mount

    - by user89348
    Seagate 1.5Tb FreeAgent USB Hard Drive. Formatted FAT32. I figure it is 75% full. Used to work fine in XUBUNTU it shows up in Cairo Dock but when I click on it I get "failed to mount drive'. Nautilus does not display the icon nor does Thunar. Windows Vista will no longer recognise drive either. Back Track 5R3 also no longer fails to mount it. BUT and here is the BIG BUT my Pioneer DV-410 reads the files and plays the everything just fine. I believe this all happened after an unclean shutdown / XUbuntu 12.10 system freeze. Why can't XUBUNTU mount this drive when a crappy 13 year old DVD player can mount it. I am desperate to back up the data before just in case the drive becomes completely unreadable. Using XUBUNTU 12.10 Quantal current 3.5.0.17 Kernel (past 3 Kernels wont read it either) and all newest apt-get update / dist-upgrade are applied. I will post any other info you folks request as needed. Additional info as requested by githlar. $ sudo fsck.vfat /dev/sdb dosfsck 3.0.13, 30 Jun 2012, FAT32, LFN Read 512 bytes at 0:Input/output error $ lsusb Bus 001 Device 003: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter Bus 002 Device 002: ID 0bc2:3001 Seagate RSS LLC Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

    Read the article

  • How do I get Graphics drivers / bluetooth / card reader working on an Acer Aspire V3-571G?

    - by Adam
    A couple of days ago I bought an Acer Aspire V3-571G laptop without a system installed on it. The only thing that was there was Linux Linpus. I created a bootable CD with Ubuntu 12.04 64-bit - I read that my processor was 64 bit and that it might be a good configuration for my gear (I'm not especially fluent with all the computer stuff, still trying to learn) and replaced Linpus with Ubuntu. Everything seemed to work fine, but there're few exceptions to that which came pass my way. My bluetooth doesn't work. It seems to be switched on, but when I check my system settings the button is actually off, and I can't drag it 'perminently' to the 'on' position. Tried a couple of commands I found on the net, none of them helped and there was no word whatsoever in my BIOS settings about enabling bluetooth. My card reader has some serious problems with copying more than one file at a time. I tried to put some music on my phone through a MicroSD card adapter (because my bluetooth doesn't work) and it got stuck every single time I copied an album on it. I'm not sure if all my drivers were properly installed, so I checked in the terminal if it could tell me sth about my graphics. typed: sudo lshw -c display and what i got was: *-display UNCLAIMED description: VGA compatible controller product: NVIDIA Corporation vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller cap_list configuration: latency=0 resources: memory:b2000000-b2ffffff memory:a0000000-afffffff memory:b0000000-b1ffffff ioport:2000(size=128) *-display description: VGA compatible controller product: Ivy Bridge Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:44 memory:b3000000-b33fffff memory:c0000000-cfffffff ioport:3000(size=64) As I said I'm no expert and not english-speaking generally, but it doesn't seem to be right. I've got a NVIDIA GeForce GT 640M.

    Read the article

  • How to represent an agile project to people focused on waterfall [closed]

    - by ahsteele
    Our team has been asked to represent our development efforts in a project plan. No one is unhappy with our work or questioning our ability to deliver, we are just participating in an IT cattle call for project plans. Trouble is we are an agile team and haven't thought about our work in terms of a formal project plan. While we have a general idea of what we are working on next we aren't 100% sure until we plan an iteration. Until now our team has largely operated in a vacuum and has not been required to present our methodology or metrics to outside parties. We follow most of the practices espoused in Extreme Programming. We hold quarterly planning meetings to have a general idea of the stories we are going to work on for a quarter. That said, our stories are documented on 3x5 cards and are only estimated at the beginning of the iteration in which they are going to be worked. After estimation we document the story in Team Foundation Sever. During an iteration, we attach code to stories and mark stories as completed once finished. From this data we are able to generate burn down and velocity charts. Most importantly we know our average velocity for an iteration keeping us from biting off more than we can chew. I am not looking to modify the way we do development but want to present our development activities in a report that someone only familiar with waterfall will understand. In What Does an Agile Project Plan Look Like, Kent McDonald does a good job laying out the differences between agile and waterfall project plans. He specifies the differences in consumable bullets: An agile project plan is feature based An Agile Project Plan is organized into iterations An Agile Project Plan has different levels of detail depending on the time frame An Agile Project Plan is owned by the Team Being able to explain the differences is great, but how best to present the data?

    Read the article

  • Windows Store now open to ALL developers

    - by CSharpZealot
    A little late, but it should be announced here too... Today’s an especially great day to be a developer. We’re very excited to announce the last significant milestone in the rollout of the Windows Store before the general availability of Windows 8 on October 26. The Store is now open for app submissions from all developers – individuals and companies – in our supported markets, and we’ve added 82 more app submission markets! Now, developers from 120 markets can publish Windows Store apps. Ted Dworkin, Partner Program Manager for the Store, authored this post. --Antoine Source: http://blogs.msdn.com/b/windowsstore/archive/2012/09/11/windows-store-now-open-to-all-developers.aspx About two weeks ago the Windows Store was opened and with the upcoming general availability of Windows 8 in October, it seems that it was good timing. In addition to the store being opened, Microsoft also announced that the MSDN, BizSpark and DreamSpark will get a 1-year Windows Store developer account. That's a different tact than what we saw for the Windows Phone 7, where we didn't get that subscription included. We're already seeing new apps showing up faster and faster, so with the addition of 86 more markets we're only going to see more apps than ever available. Since i'm now back on a Windows 8 platform (was out for about a month) I'm going to start blogging more content around the Windows 8 developer experience. Next stop for me...get my hands on a Windows 8 surface device as quickly as possible :) Keep coding!

    Read the article

  • Fixing Windows7 Bootmgr

    - by Ashfame
    I made my laptop Dell XPS 15z dual boot with Ubuntu last year, and something went wrong & BOOTMGR of my windows got fried. I couldn't fix it that time. And I kept using Ubuntu. I don't even remember whether I installed directly via a live usb or used wubi, sorry. I installed 11.10 at that point of time, but right now I am on 12.10. Today, I got to know about the Boot repair tool, so I was wondering with this tool may be I can figure out what's exactly wrong with my setup. This is my Boot info - http://paste.ubuntu.com/1343575/ If I select the Win7 entry on GRUB2, I get the error BOOTMGR is missing. Press Ctrl-Alt-Del. Now the thing is I have read numerous links on how this could be fixed, but I don't feel comfortable without knowing what I am doing. So unless I am sure what a certain tool would do, I would prefer fixing it by hand (manually editing files). So reading from my boot info file, can anyone explain it to me what's messed up wrong here and what could fix it? I certainly can't afford to have my ubuntu install unbootable right now, but looking into this issue is bothering me too much. Help appreciated! I have Win7 DVD & Ubuntu live USBs with me, I am just looking for a sure shot way of fixing Win7 without any harm to my existing Ubuntu install.

    Read the article

  • CodePlex Daily Summary for Thursday, October 17, 2013

    CodePlex Daily Summary for Thursday, October 17, 2013Popular ReleasesSocial Network Importer for NodeXL: SocialNetImporter(v.1.9): This new version includes: - Download latest status update and use it as vertex tooltip - Limit the timelines to parse to me, my friends or both - Fixed some reported bugs about the fan page and group importer - Fixed the login bug reported latelyDotNetNuke® Wiki: 05.00.00: Changes made to better support upgrades and the removal of deprecated legacy files that were causing formatting issues. Updated the Version number to better indicate the significance of the C# migration and the new DNN 7.0.2 minimum requirement.TerrariViewer: TerrariViewer v7.1 [Terraria Inventory Editor]: You can now backspace in number fields Items added in 1.2.0.3 no longer corrupt player files Buff durations capped at 9999999 Item stacks capped at 9999999 Version info added Prefix IDs corrected Shoe and Eye color box are now properly clickable Moved Bank and Safe into their own tab Users will now be notified of new updatesPython Tools for Visual Studio: 2.0: PTVS 2.0 We’re pleased to announce the release of Python Tools for Visual Studio 2.0 RTM. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including CPython/IronPython, Edit/Intellisense/Debug/Profile, Cloud, IPython, and cross platform and cross language debugging support. QUICK VIDEO OVERVIEW For a quick overview of the general IDE experience, please watch this v...C# Intellisense for Notepad++: Release v.1.0.8.2: Solved scrolling problem after DocumentFormatting Implemented "format as you type" --- To avoid the DLLs getting locked by OS use MSI file for the installation.CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.8.2: Solved scrolling problem after DocumentFormatting Implemented "format as you type" --- To avoid the DLLs getting locked by OS use MSI file for the installation.Collection Commander for Configuration Manager 2012: CMCollCtr 1.0.0: Change log: - MSI Setup - UI Improved - CM12 Console integration - New Powershell code snippets - Client Center IntegrationLINQ to Twitter: LINQ to Twitter v2.1.09: Supports .NET 3.5, .NET 4.0, .NET 4.5, Silverlight 4.0, Windows Phone 7.1, Windows Phone 8, Client Profile, Windows 8, and Windows Azure. 100% Twitter API coverage. Also supports Twitter API v1.1! Also on NuGet.Sandcastle Help File Builder: SHFB v1.9.8.0 with Visual Studio Package: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This new release contains bug fixes and feature enhancements. There are some potential breaking changes in this release as some features of the Help File Builder have been moved into...C++ REST SDK (codename "Casablanca"): C++ REST SDK 1.3.0: This release fixes multiple customer reported issues as well as the following: Full support for Dev12 binaries and project files Full support for Windows XP New sample highlighting the Client and Server APIs : BlackJack Expose underlying native handle to set custom options on http_client Improvements to Listener Library Note: Dev10 binaries have been dropped as of this release, however the Dev10 project files are still available in the Source CodeAD ACL Scanner: 1.3.2: Minor bug fixed: Powershell 4.0 will report: Select—Object: Parameter cannot be processed because the parameter name p is ambiguous.Json.NET: Json.NET 5.0 Release 7: New feature - Added support for Immutable Collections New feature - Added WriteData and ReadData settings to DataExtensionAttribute New feature - Added reference and type name handling support to extension data New feature - Added default value and required support to constructor deserialization Change - Extension data is now written when serializing Fix - Added missing casts to JToken Fix - Fixed parsing large floating point numbers Fix - Fixed not parsing some ISO date ...Fast YouTube Downloader: YouTube Downloader 2.2.0: YouTube Downloader 2.2.0VidCoder: 1.5.8 Beta: Added hardware acceleration options: Bicubic OpenCL scaling algorithm, QSV decoding/encoding and DXVA decoding. Updated HandBrake core to SVN 5834. Updated VidCoder setup icon. Fixed crash when choosing the mp4v2 container on x86 and opening on x64. Warning: the hardware acceleration features require specific hardware or file types to work correctly: QSV: Need an Intel processor that supports Quick Sync Video encoding, with a monitor hooked up to the Intel HD Graphics output and the lat...ASP.net MVC Awesome - jQuery Ajax Helpers: 3.5.2: version 3.5.2 - fix for setting single value to multivalue controls - datepicker min max date offset fix - html encoding for keys fix - enable Column.ClientFormatFunc to be a function call that will return a function version 3.5.1 - fixed html attributes rendering - fixed loading animation rendering - css improvements version 3.5 ========================== - autosize for all popups ( can be turned off by calling in js awe.autoSize = false ) - added Parent, Paremeter extensions ...Wsus Package Publisher: Release v1.3.1310.12: Allow the Update Creation Wizard to be set in full screen mode. Fix a bug which prevent WPP to Reset Remote Sus Client ID. Change the behavior of links in the Update Detail Viewer. Left-Click to open, Right-Click to copy to the Clipboard.WDTVHubGen - Adds Metadata, thumbnails and subtitles to WDTV Live Hubs: WDTVHubGen.v2.1.6.maint: I think this covers all of the issues. new additions: fixed the thumbnail problem for backgrounds. general clean up and error checking. need to get this put through the wringer and all feedback is welcome.BIDS Helper: BIDS Helper 1.6.4: This BIDS Helper release brings the following new features and fixes: New Features: A new Bus Matrix style report option when you run the Printer Friendly Dimension Usage report for an SSAS cube. The Biml engine is now fully in sync with the supported subset of Varigence Mist 3.4. This includes a large number of language enhancements, bugfixes, and project deployment support. Fixed Issues: Fixed Biml execution for project connections fixing a bug with Tabular Translations Editor not a...Free language translator and file converter: Free Language Translator 3.4: fixes for new version look up.PowerShell App Deployment Toolkit: PowerShell App Deployment Toolkit v3.0.6: Added PersistPrompt parameter to Show-InstallationWelcome and Show-InstallationPrompt. Prompt window is persistently returned to center screen after interval specified in config file (default 10 seconds). For Show-InstallationWelcome, this only takes effect if deferral is not available to user. The user will have no option but to respond to the prompt - resistance is futile! Added example advanced Office 2010 deployment script Asynchronous actions now write to the same log file as synchro...New ProjectsAdditionPage: This is a simple ASP.NET in VB.NET page that allows users to enter 2 numbers, and display their sum. Arad Enterprise Messaging Proxy: In these situations, the overhead and configuration complexity of an external webserver is seldom worth the trouble. AEMGP Server Implementation base on Socke.Boring Sudoku: Boring Sudoku is Sudoku game, made for SFML-game programming tutorial. Feel free to download the source code to learn more about game programming.Configurator Debug: O Configurator Debug é uma ferramenta que auxilia na depuração das queries da feature do Configurador no Dynamics AX 2009.Fast Query: FastQuery - is a tool to execute MS SQL Queries without SQL Server Management Studio (SSMS). gdrwebapp1: Test ProjectK2 workflow Manifestation d'interet with custom IPF methode: K2 SamplesL Language Interpreter: We are now in dev start stage, when none of the functionality is available, but probably you will be able to see it published. this shoud have tex outputLameXP - Audio Encoder Front-End: LameXP is a graphical user-interface for various of audio encoders: It allows you convert audio files from one format to another one in the most simple way.Learn Node.js: Node.js express jade ...localcompare: localhistory add new featureOpen source WPF PDF Viewer: Open source PDF Viewer based on Apitron PDF Rasterizer for .NET component that performs high-quality conversion from PDF file to an image.Pfz.AnimationManagement: A .NET animation library that supports both declarative and imperative animations, capable of creating from simple animation to entire games.SerieSpotter: .net projectSimpleUnitity: ??????? ??? DataBase, TextLog, CacheSPOnlineDevelopTool(SharePoint ??????): SPOnlineDevelopTool?????????SharePoint WebPart?SharePoint WebPartVoya Media: Voya Media is free, open-source and provides one central place to play and organize all your music, pictures and videos.

    Read the article

  • Is there ever a reason to do all an object's work in a constructor?

    - by Kane
    Let me preface this by saying this is not my code nor my coworkers' code. Years ago when our company was smaller, we had some projects we needed done that we did not have the capacity for, so they were outsourced. Now, I have nothing against outsourcing or contractors in general, but the codebase they produced is a mass of WTFs. That being said, it does (mostly) work, so I suppose it's in the top 10% of outsourced projects I've seen. As our company has grown, we've tried to take more of our development in house. This particular project landed in my lap so I've been going over it, cleaning it up, adding tests, etc etc. There's one pattern I see repeated a lot and it seems so mindblowingly awful that I wondered if maybe there is a reason and I just don't see it. The pattern is an object with no public methods or members, just a public constructor that does all the work of the object. For example, (the code is in Java, if that matters, but I hope this to be a more general question): public class Foo { private int bar; private String baz; public Foo(File f) { execute(f); } private void execute(File f) { // FTP the file to some hardcoded location, // or parse the file and commit to the database, or whatever } } If you're wondering, this type of code is often called in the following manner: for(File f : someListOfFiles) { new Foo(f); } Now, I was taught long ago that instantiated objects in a loop is generally a bad idea, and that constructors should do a minimum of work. Looking at this code it looks like it would be better to drop the constructor and make execute a public static method. I did ask the contractor why it was done this way, and the response I got was "We can change it if you want". Which was not really helpful. Anyway, is there ever a reason to do something like this, in any programming language, or is this just another submission to the Daily WTF?

    Read the article

  • Open Source sponsored feature development

    - by Suma
    I am considering to sponsor a development of some particular features in some Open Source tools. I would like the results of the work to be available publicly, and if possible, to be included in the main product line. The features are usually something which is of general use, but not very critical, and no one has currently a plan to develop it. For illustration, imagine I would like to use MinGW for Win32 development, but I miss a post mortem debugging option, I would like this feature to be implemented and I am willing to pay $1000 for it. Is there some common way how to proceed, or is this wildly per-project dependent? Are there some general guidelines how to contact the product developers, or are there some common meeting places where smart open source people who might interested to participate in such sponsored development meet, which I should visit to advertise the sponsoring option? Are there some specific ways how to talk about the job to be more attractive to people participating in open source (e.g. it might be more interesting for them to participate in a contest than just to take a payed job, which might have a bit of mundane feel)? Or perhaps is this something which you think has little chance to succeed, because perhaps money has very little value for open source developers? Any tips and experiences from someone who has some experience of open source sponsorhip from any side (sponsor or the developer) are welcome.

    Read the article

  • Booting Error while using 12.04 booting from GRUB

    - by Paul Z.
    my name is Paul. I have encountered an issue relating to GRUB booting and the booting process in general. I have been running Ubuntu 12.04 LTS on my machine for quite a while. Before that, i had (before) 10.04, 11.04, 11.10, etc. I have been running Ubuntu, in general, but more specifically 12.04 for a long time with little to no problems. The problem: Earlier today, i was using my machine and then decided to take a little break. I shut down my machine (laptop, in case anyone was wondering) and left. Later, I came back ready to start it up and continue. I started it up and it took me to the Toshiba screen (like normal) then to the GRUB screen. I guessed that nothing was truly wrong, and chose the first option (something around the lines of: Ubuntu, with linux 3.22.0-35-generic). I waited for a bit and it still displayed the same purple screen. I restarted it and now chose the option like the first but with recovery at the end. Same result. Later, I waited longer and found that my computer came up with a bunch of lines of script. I waited longer but nothing new happened. What are your suggestions as to fix this problem? I will let my computer run overnight with the recovery setting and will let you know what the result is. Until then, please help. Thank you, your time and effort is greatly appreciated!

    Read the article

  • How do I get a Belkin F5D8053 wireless adapter working?

    - by disassembler
    I've tried getting my Belkin N Wireless adapter to work on Ubuntu many times with no luck at all. Each time I seem to arrive at a dead end. After some thorough searching of UbuntuForums and WifiDocs I've gathered some information and narrowed the problem down to an issue with the rtl819xU driver. Here's some info that may help: $ sudo lshw -C network *-network DISABLED description: Wireless interface physical id: 1 bus info: usb@1:2 logical name: wlan0 serial: 00:22:75:38:52:ac capabilities: ethernet physical wireless configuration: broadcast=yes driver=rtl819xU multicast=yes wireless=802.11b/g/n $ sudo lsmod Module Size Used by vesafb 13449 1 snd_ice1724 106559 2 snd_ice17xx_ak4xxx 13163 1 snd_ice1724 snd_ac97_codec 105614 1 snd_ice1724 ac97_bus 12642 1 snd_ac97_codec snd_ak4xxx_adda 18436 2 snd_ice1724,snd_ice17xx_ak4xxx snd_ak4114 14326 1 snd_ice1724 snd_pt2258 12986 1 snd_ice1724 snd_i2c 13831 2 snd_ice1724,snd_pt2258 snd_ak4113 14307 1 snd_ice1724 snd_pcm 80244 4 snd_ice1724,snd_ac97_codec,snd_ak4114,snd_ak4113 fglrx 2434640 121 snd_seq_midi 13132 0 snd_rawmidi 25269 2 snd_ice1724,snd_seq_midi binfmt_misc 13213 1 snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51291 2 snd_seq_midi,snd_seq_midi_event ppdev 12849 0 snd_timer 28659 2 snd_pcm,snd_seq snd_seq_device 14110 3 snd_seq_midi,snd_rawmidi,snd_seq dcdbas 14054 0 r8192u_usb 297246 0 snd 55295 16 snd_ice1724,snd_ac97_codec,snd_ak4xxx_adda,snd_ak4114,snd_pt2258,snd_i2c,snd_ak4113,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 12600 1 snd parport_pc 32111 1 snd_page_alloc 14073 1 snd_pcm shpchp 32345 0 lp 13349 0 parport 36746 3 ppdev,parport_pc,lp usbhid 41704 0 hid 77084 1 usbhid e100 40108 0 floppy 60032 0 $ sudo iwconfig wlan0 802.11b/g/n Mode:Managed Access Point: Not-Associated Bit Rate:1 Mb/s Retry min limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=0/100 Signal level=0 dBm Noise level=0 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 I'd like to know if 1) Is the driver is properly installed and recognized by Ubuntu? 2) What can I do to load the drivers properly and make use of the adapter? Thanks!

    Read the article

  • Wireless drops on HP ENVY dv6 with RT3290 wireless, worked without problem prior to upgrading to Ubuntu 13.10, can it be fixed?

    - by Tim
    I have a HP ENVY dv6 Notebook PC with an AMD A10 quad core and RT3290 wireless. Since I upgraded from Ubuntu 13.04 to 13.10, the wireless connects, but then drops after a few minutes or longer, whether or not I am running openconnect to get through a VPN. If I attempt to run a remote X client (e.g. remote xterm) it drops. If I don't run an X client, it disconnects after a while, requiring a reload of the driver and reconnect. Wireless info... sudo lshw -c network *-network description: Wireless interface product: RT3290 Wireless 802.11n 1T/1R PCIe vendor: Ralink corp. physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 00 serial: 68:94:23:a7:09:cb width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rt2800pci driverversion=3.11.0-12-generic firmware=0.37 ip=192.168.1.115 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:55 memory:f0210000-f021ffff I have successfully built and installed the MediaTek driver with no luck on connecting, then the system hangs on reboot and I have to recover/undo the changes to boot successfully.

    Read the article

  • How to migrate user settings and data to new machine?

    - by torbengb
    I'm new to Ubuntu and recently started using it on my PC. I'm going to replace that PC with a new machine. I want to transfer my data and settings to the nettop. What aspects should I consider? Obviously I want to move my data over. What things am I missing if I only copy the entire home folder? This is a home pc (not corporate) so user rights and other security issues are not a concern, except that the files should be accessible on the new machine! Please take into account that the new machine is a nettop that doesn't have an optical drive and doesn't allow me to hook the old SATA disk into it, so any data transfer must be handled via home network (I can have both the old and the new machine turned on and connected to the home LAN) and I have an USB thumbdrive with limited capacity (2GB). This sounds like it might limit the general applicability, but it would in fact make it more general. I'll make this a wiki topic because there could be several "right" answers. Update: Or so I thought. I don't see a choice for that.

    Read the article

  • Collabnet Subversion and Self Signed Certificates

    - by Robert May
    We installed Collabnet as our subversion server recently.  This is the first time that we’ve used it.  In general, it seems pretty good, but we ran into a problem with it.  People were getting the following error in Tortoise: OPTIONS of ’https://xxxx.xxxxxxxx.xxxx/svn/xxxxx’: SSL handshake failed: SSL error code – 1/1/336032856 (https://xxxx.xxxxxxxx.xxxx) The odd thing is that for some people, it worked, for others, it didn’t!  I also couldn’t find anything useful out on the internet. We had checked the Subversion Server should serve via https option in the settings, and all of the ports were open, etc. This option causes a self signed certificate to be used. What we discovered: Tortoise must use the same url as is in the Hostname field on the General settings for collabnet or you’ll get this error.  Basically, some people were using https://svn.xxxxxxx.xxxxx and others were using https://computername.xxxxxxxx.xxxx.  Because the host name said used the computer name version, the whole thing broke.  By changing the host name to the svn version, which is what they should be using, the problem went away.  The users do get the “Accept Certificate” prompt, but we can live with that! Technorati Tags: Subversion,Collabnet

    Read the article

  • Internet is far slower in Ubuntu than Windows 7 on dual-booted machine

    - by Tim
    Edit: I'll leave the original post as-is, but after further investigation, it appears that the problem is something to do with my wi-fi card. Speeds are normal when I connect via cable. Edit 2: Problem was solved. It was something to do with the wireless card drivers. I normally use Windows 7 on my laptop and have internet speeds that are normally about 15-20 Mb/s. I have recently dual-booted with Ubuntu 12.10, and have noticed that internet speeds are drastically slower in Ubuntu. When tested, speeds range from 0.2-2 Mb/s, although occasionally being significantly faster than that or even stopping completely for short periods of time. I've also noticed that when first booting into Ubuntu, speeds start fairly fast, and drop to incredibly slow with a few seconds to a few minutes. There's still some possibility that the issue may be with my ISP, as things seem slower than usual even in Windows, but I suspect that it is related to Ubuntu, as things are far slower in Ubuntu than in Windows. I'm wondering, what could be the cause of this? Potentially relevant information: -I've dual booted before on this machine with earlier versions of Ubuntu (different ISP at the time) with no problem. ISP: Rogers (Major Canadian ISP) System info (Gateway NV53a Laptop): Operating System MS Windows 7 Home Premium 64-bit CPU AMD Phenom II N970 Caspian 45nm Technology RAM 6.00 GB Dual-Channel DDR3 @ 664MHz (9-9-9-24) Motherboard Gateway SJV51_DN (Socket S1G4) Graphics Generic PnP Monitor (1366x768@60Hz) ATI Mobility Radeon HD 4250 (Acer Incorporated [ALI]) Hard Drives 733GB TOSHIBA TOSHIBA MK7559GSXP ATA Device (SATA) Networking info: Connected through Wi-Fi Atheros AR5B97 Wireless Network A

    Read the article

  • "Enable Wireless" option is disabled in network settings

    - by silenTK
    I'm using Ubuntu 11.10 (dual booted with Windows 7) but I'm unable to access Internet wireless even though I can do so on Windows 7. The output for rfkill list all is given below: rfkill list all 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: yes 1: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no The output for sudo lshw -C network *-network DISABLED is: description: Wireless interface product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth1 version: 01 serial: 11:11:11:11:11:11 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:16 memory:c2500000-c2503fff *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 05 serial: 22:22:22:22:22:22 size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8105e-1.fw latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:42 ioport:3000(size=256) memory:c0404000-c0404fff memory:c0400000-c0403fff Broadcom STA wireless driver is installed, activated, and currently in use. My laptop is a HP-Pavilion-g6-1004tx. My hardware switch is on. Enable Wireless option is also disabled in network settings.

    Read the article

< Previous Page | 139 140 141 142 143 144 145 146 147 148 149 150  | Next Page >