Search Results

Search found 6200 results on 248 pages for 'lib'.

Page 143/248 | < Previous Page | 139 140 141 142 143 144 145 146 147 148 149 150  | Next Page >

  • Wireless Problem on Acer Aspire 5610z

    - by Ugur Can Yalaki
    I installed ubuntu 12.04 on my machine, but I can't get wireless connection to work. My computer is Acer Aspire 5610z. I found that some other people that have same computer, face the same problem. Here is some information about it: ****** info trace ****** * uname -a * Linux ucy-Aspire-5610Z 3.8.0-32-generic #47~precise1-Ubuntu SMP Wed Oct 2 16:22:28 UTC 2013 i686 i686 i386 GNU/Linux * lsb_release * Distributor ID: Ubuntu Description: Ubuntu 12.04.3 LTS Release: 12.04 Codename: precise * lspci * 05:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [14e4:4311] (rev 01) Subsystem: AMBIT Microsystem Corp. Device [1468:0422] Kernel driver in use: b43-pci-bridge 06:01.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX [14e4:170c] (rev 02) Subsystem: Acer Incorporated [ALI] Device [1025:0090] Kernel driver in use: b44 * lsusb * Bus 001 Device 004: ID 04e8:6863 Samsung Electronics Co., Ltd Bus 001 Device 002: ID 5986:0100 Acer, Inc Orbicam Bus 002 Device 002: ID 046d:c52f Logitech, Inc. Wireless Mouse M305 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub * PCMCIA Card Info * PRODID_1="" PRODID_2="" PRODID_3="" PRODID_4="" MANFID=0000,0000 FUNCID=255 * iwconfig * * rfkill * 0: acer-wireless: Wireless LAN Soft blocked: no Hard blocked: no * lsmod * ssb_hcd 12781 0 ssb 51554 2 ssb_hcd,b44 * nm-tool * NetworkManager Tool State: connected (global) Device: usb0 [Wired connection 2] ------------------------------------------- Type: Wired Driver: rndis_host State: connected Default: yes HW Address: Capabilities: Carrier Detect: yes Wired Properties Carrier: on IPv4 Settings: Address: 192.168.42.7 Prefix: 24 (255.255.255.0) Gateway: 192.168.42.129 DNS: 192.168.42.129 IPv6 Settings: Address: ::a05d:a1ff:fea4:1738 Prefix: 64 Gateway: fe80::504d:76ff:fe86:db04 Address: fe80::a05d:a1ff:fea4:1738 Prefix: 64 Gateway: fe80::504d:76ff:fe86:db04 DNS: fe80::504d:76ff:fe86:db04 Device: eth2 ----------------------------------------------------------------- Type: Wired Driver: b44 State: unavailable Default: no HW Address: Capabilities: Carrier Detect: yes Wired Properties Carrier: off * NetworkManager.state * [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true * NetworkManager.conf * [main] plugins=ifupdown,keyfile dns=dnsmasq [ifupdown] managed=false * interfaces * auto lo iface lo inet loopback * iwlist * * resolv.conf * nameserver 127.0.0.1 * blacklist * [/etc/modprobe.d/blacklist-ath_pci.conf] blacklist ath_pci [/etc/modprobe.d/blacklist-bcm43.conf] blacklist b43 blacklist b43legacy blacklist ssb blacklist bcm43xx blacklist brcm80211 blacklist brcmfmac blacklist brcmsmac blacklist bcma [/etc/modprobe.d/blacklist.conf] blacklist evbug blacklist usbmouse blacklist usbkbd blacklist eepro100 blacklist de4x5 blacklist eth1394 blacklist snd_intel8x0m blacklist snd_aw2 blacklist i2c_i801 blacklist prism54 blacklist bcm43xx blacklist garmin_gps blacklist asus_acpi blacklist snd_pcsp blacklist pcspkr blacklist amd76x_edac * modinfo * filename: /lib/modules/3.8.0-32-generic/kernel/drivers/usb/host/ssb-hcd.ko license: GPL description: Common USB driver for SSB Bus author: Hauke Mehrtens srcversion: E127A51EDC8F44D2C2A8F15 alias: ssb:v4243id0819rev* alias: ssb:v4243id0817rev* alias: ssb:v4243id0808rev* depends: ssb intree: Y vermagic: 3.8.0-32-generic SMP mod_unload modversions 686 filename: /lib/modules/3.8.0-32-generic/kernel/drivers/ssb/ssb.ko license: GPL description: Sonics Silicon Backplane driver srcversion: 14621F6EC014F731244437C alias: pci:v000014E4d00004350sv*sd*bc*sc*i* alias: pci:v000014E4d0000432Csv*sd*bc*sc*i* alias: pci:v000014E4d0000432Bsv*sd*bc*sc*i* alias: pci:v000014E4d00004329sv*sd*bc*sc*i* alias: pci:v000014E4d00004328sv*sd*bc*sc*i* alias: pci:v000014E4d00004325sv*sd*bc*sc*i* alias: pci:v000014E4d00004324sv*sd*bc*sc*i* alias: pci:v000014E4d0000A8D6sv*sd*bc*sc*i* alias: pci:v000014E4d00004322sv*sd*bc*sc*i* alias: pci:v000014E4d00004321sv*sd*bc*sc*i* alias: pci:v000014E4d00004320sv*sd*bc*sc*i* alias: pci:v000014E4d00004319sv*sd*bc*sc*i* alias: pci:v000014A4d00004318sv*sd*bc*sc*i* alias: pci:v000014E4d00004318sv*sd*bc*sc*i* alias: pci:v000014E4d00004315sv*sd*bc*sc*i* alias: pci:v000014E4d00004312sv*sd*bc*sc*i* alias: pci:v000014E4d00004311sv*sd*bc*sc*i* alias: pci:v000014E4d00004307sv*sd*bc*sc*i* alias: pci:v000014E4d00004306sv*sd*bc*sc*i* alias: pci:v000014E4d00004301sv*sd*bc*sc*i* depends: intree: Y vermagic: 3.8.0-32-generic SMP mod_unload modversions 686 * udev rules * PCI device 0x14e4:/sys/devices/pci0000:00/0000:00:1e.0/0000:06:01.0/ssb1:0 (b44) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0" PCI device 0x14e4:/sys/devices/pci0000:00/0000:00:1e.0/0000:06:01.0/ssb2:0 (b44) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1" PCI device 0x14e4:/sys/devices/pci0000:00/0000:00:1e.0/0000:06:01.0/ssb3:0 (b44) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth2" * dmesg * [ 2.385241] ssb: Found chip with id 0x4311, rev 0x01 and package 0x00 [ 2.385256] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243) [ 2.385266] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243) [ 2.385276] ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243) [ 2.385286] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243) [ 2.448147] ssb: Sonics Silicon Backplane found on PCI device 0000:05:00.0 [ 2.468112] ssb: Found chip with id 0x4401, rev 0x02 and package 0x00 [ 2.468124] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243) [ 2.468132] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243) [ 2.468140] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243) [ 2.508230] ssb: Sonics Silicon Backplane found on PCI device 0000:06:01.0 [ 2.528620] b44 ssb1:0 eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver ******** done ******** Thank you already for your help.

    Read the article

  • Java Cryptography Extension

    - by Adam Tannon
    I was told that in order to support AES256 encryption inside my Java app that I would need the JCE with Unlimited Strength Jurisdiction Policy Files. I downloaded this from Oracle and unzipped it and I'm only seeing 2 JARs: local_policy.jar; and US_export_polic.jar I just want to confirm I'm not missing anything here! My understanding (after reading the README.txt) is that I just drop these two into my <JAVA_HOME>/lib/security/ directory and they should be installed. By the names of these JARs I have to assume that its not the Java Crypto API that cannot handle AES256, but it's in fact a legal issue, perhaps? And that these two JARs basically tell the JRE "yes, it's legally-acceptable to run this level of crypto (AES256)." Am I correct or off-base?

    Read the article

  • Installing a downgraded version of Firefox 16 from PPA

    - by Mikko Ohtamaa
    I'd like to fetch and install old FF16 instead of FF17 on Ubuntu 10.04 LTS server. Currently FF17 is default. FF17 is incompatible with Selenium 2.26 http://stackoverflow.com/questions/13600247/unable-to-run-selenium-suite-on-firefox-17 How one can install an old version of Firefox with apt-get? Can one pindown this version so that it is not automatically updated? Also if there exists a static FF16 installation available it is a solution. apt-cache policy firefox firefox: Installed: 17.0.1+build1-0ubuntu0.10.04.1 Candidate: 17.0.1+build1-0ubuntu0.10.04.1 Version table: *** 17.0.1+build1-0ubuntu0.10.04.1 0 500 http://dk.archive.ubuntu.com/ubuntu/ lucid-updates/main Packages 500 http://security.ubuntu.com/ubuntu/ lucid-security/main Packages 100 /var/lib/dpkg/status 3.6.3+nobinonly-0ubuntu4 0 500 http://dk.archive.ubuntu.com/ubuntu/ lucid/main Packages

    Read the article

  • How do I change the default .htm file icon?

    - by Michael Clayton
    I really enjoy the look of UBUNTU. The only thing that I want to change is the default icon used for .html (.htm) files. I want to use the icon /usr/lib/firefox/browser/icons/mozicon128.png instead. I do not want to change any other visual element. Is there a practical way to accomplish this small change? edit: @Mitch, I've used assogiate in the past and although I was able to change the icon used for .mht files, I could not get it to change the .htm icon. @Anwar Shah, thanks for the information. I wish that it would work for me. Running 13.10 x86, after I do the copy of the icons, in the folders are a bunch of links to .svg files not actual graphics files. It does not appear that the second copy actually does anything on my system.

    Read the article

  • My VPS cannot send email

    - by ifdion
    Webmaster Newbie Question I have a low end vps (128MB RAM)running on Debian.I used a bash script by ilevkov to setup the site. After some trial and error, I managed to set up a WordPress on it. Just now I found out that my VPS can't send any email. I tested using the WordPress reset password email, and it shows The e-mail could not be sent. Possible reason: your host may have disabled the mail() function... After some Google session I noticed that I can send email from ssh. So I tried mail [email protected] Subject: Halo dion some message . and the result said EOT /usr/lib/sendmail: No such file or directory "/root/dead.letter" 9/243 . . . message not sent. The question How can I fix my VPS mail setting?

    Read the article

  • How do I rebuild a corrupt dpkg status file?

    - by Ramón
    Whenever I type sudo apt-get remove and then press the Tab key for auto-completion I get the following message: grep-status: /var/lib/dpkg/status:15945: expected a colon. I don't see anything especially strange at line 15945 in the status file. It's a dot character in the description field of a mono library package and inserting a colon did not help. Removing the line containing the dot did not work either. Overwriting the file with status-old resulted in the same message. Is there some way to rebuild the status file?

    Read the article

  • While installing updates I get "Package operation Failed" for ubuntu 12.04

    - by user54395
    i get the following response in the details:- Please help nstallArchives() failed: perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory (Reading database ... (Reading database ... 5%% (Reading database ... 10%% (Reading database ... 15%% (Reading database ... 20%% (Reading database ... 25%% (Reading database ... 30%% (Reading database ... 35%% (Reading database ... 40%% (Reading database ... 45%% (Reading database ... 50%% (Reading database ... 55%% (Reading database ... 60%% (Reading database ... 65%% (Reading database ... 70%% (Reading database ... 75%% (Reading database ... 80%% (Reading database ... 85%% (Reading database ... 90%% (Reading database ... 95%% (Reading database ... 100%% (Reading database ... 427340 files and directories currently installed.) Preparing to replace thunderbird-trunk-globalmenu 14.0~a1~hg20120409r9862.91177-0ubuntu1~umd1 (using .../thunderbird-trunk-globalmenu_14.0~a1~hg20120409r9866.91235-0ubuntu1~umd1_i386.deb) ... Unpacking replacement thunderbird-trunk-globalmenu ... Preparing to replace thunderbird-trunk 14.0~a1~hg20120409r9862.91177-0ubuntu1~umd1 (using .../thunderbird-trunk_14.0~a1~hg20120409r9866.91235-0ubuntu1~umd1_i386.deb) ... Unpacking replacement thunderbird-trunk ... Processing triggers for man-db ... locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for gnome-menus ... Processing triggers for desktop-file-utils ... Setting up crossplatformui (1.0.27) ... Rather than invoking init scripts through /etc/init.d, use the service(8) utility, e.g. service acpid restart Since the script you are attempting to invoke has been converted to an Upstart job, you may also use the stop(8) and then start(8) utilities, e.g. stop acpid ; start acpid. The restart(8) utility is also available. acpid stop/waiting acpid start/running, process 5286 package libqtgui4 exist QT_VERSION = 4 make -C /lib/modules/3.2.0-22-generic/build M=/usr/local/bin/ztemtApp/zteusbserial/below2.6.27 modules make[1]: Entering directory /usr/src/linux-headers-3.2.0-22-generic' CC [M] /usr/local/bin/ztemtApp/zteusbserial/below2.6.27/usb-serial.o /usr/local/bin/ztemtApp/zteusbserial/below2.6.27/usb-serial.c:34:28: fatal error: linux/smp_lock.h: No such file or directory compilation terminated. make[2]: *** [/usr/local/bin/ztemtApp/zteusbserial/below2.6.27/usb-serial.o] Error 1 make[1]: *** [_module_/usr/local/bin/ztemtApp/zteusbserial/below2.6.27] Error 2 make[1]: Leaving directory/usr/src/linux-headers-3.2.0-22-generic' make: * [modules] Error 2 dpkg: error processing crossplatformui (--configure): subprocess installed post-installation script returned error exit status 2 No apport report written because MaxReports is reached already Setting up thunderbird-trunk (14.0~a1~hg20120409r9866.91235-0ubuntu1~umd1) ... Setting up thunderbird-trunk-globalmenu (14.0~a1~hg20120409r9866.91235-0ubuntu1~umd1) ... Errors were encountered while processing: crossplatformui Error in function: SystemError: E:Sub-process /usr/bin/dpkg returned an error code (1) Setting up crossplatformui (1.0.27) ... Rather than invoking init scripts through /etc/init.d, use the service(8) utility, e.g. service acpid restart Since the script you are attempting to invoke has been converted to an Upstart job, you may also use the stop(8) and then start(8) utilities, e.g. stop acpid ; start acpid. The restart(8) utility is also available. acpid stop/waiting acpid start/running, process 5541 package libqtgui4 exist QT_VERSION = 4 make -C /lib/modules/3.2.0-22-generic/build M=/usr/local/bin/ztemtApp/zteusbserial/below2.6.27 modules make[1]: Entering directory /usr/src/linux-headers-3.2.0-22-generic' CC [M] /usr/local/bin/ztemtApp/zteusbserial/below2.6.27/usb-serial.o /usr/local/bin/ztemtApp/zteusbserial/below2.6.27/usb-serial.c:34:28: fatal error: linux/smp_lock.h: No such file or directory compilation terminated. make[2]: *** [/usr/local/bin/ztemtApp/zteusbserial/below2.6.27/usb-serial.o] Error 1 make[1]: *** [_module_/usr/local/bin/ztemtApp/zteusbserial/below2.6.27] Error 2 make[1]: Leaving directory/usr/src/linux-headers-3.2.0-22-generic' make: * [modules] Error 2 dpkg: error processing crossplatformui (--configure): subprocess installed post-installation script returned error exit status 2

    Read the article

  • How to fix Duplicate sources.list entry?

    - by Harbhag
    I keep getting this warning whenever I try to run sudo apt-get update. W: Duplicate sources.list entry http://archive.ubuntu.com/ubuntu/ precise-updates/main i386 Packages (/var/lib/apt/lists/archive.ubuntu.com_ubuntu_dists_precise-updates_main_binary-i386_Packages) W: You may want to run apt-get update to correct these problems Below is the output from /etc/apt/sources.list file: deb http://archive.ubuntu.com/ubuntu precise main restricted deb-src http://archive.ubuntu.com/ubuntu precise main restricted deb http://archive.ubuntu.com/ubuntu precise-updates main restricted deb-src http://archive.ubuntu.com/ubuntu precise-updates main restricted deb http://archive.ubuntu.com/ubuntu precise universe deb-src http://archive.ubuntu.com/ubuntu precise universe deb http://archive.ubuntu.com/ubuntu precise-updates universe deb-src http://archive.ubuntu.com/ubuntu precise-updates universe deb http://archive.ubuntu.com/ubuntu precise multiverse deb-src http://archive.ubuntu.com/ubuntu precise multiverse deb http://archive.ubuntu.com/ubuntu precise-updates multiverse deb-src http://archive.ubuntu.com/ubuntu precise-updates multiverse deb http://archive.ubuntu.com/ubuntu precise-security main restricted deb-src http://archive.ubuntu.com/ubuntu precise-security main restricted deb http://archive.ubuntu.com/ubuntu precise-security universe deb-src http://archive.ubuntu.com/ubuntu precise-security universe deb http://archive.ubuntu.com/ubuntu precise-security multiverse deb-src http://archive.ubuntu.com/ubuntu precise-security multiverse How do I fix it?

    Read the article

  • Cluster Node Recovery Using Second Node in Solaris Cluster

    - by Onur Bingul
    Assumptions:Node 0a is the cluster node that has crashed and could not boot anymore.Node 0b is the node in cluster and in production with services active.Both nodes have their boot disk mirrored via SDS/SVM.We have many options to clone the boot disk from node 0b:- make a copy via network using the ufsdump command and pipe to ufsrestore - make a copy inserting the disk locally on node 0b and creating the third mirror with SDS- make a copy inserting the disk locally on node 0b using dd commandIn this procedure we are going to use dd command (from my experience this is the best option).Bare in mind that in the examples provided we work on Sun Fire V240 systems which have SCSI internal disks. In the case of Fibre Channel (FC) internal disks you must pay attention to the unique identifier, or World Wide Name (WWN), associated with each FC disk (in this case take a look at infodoc #40133 in order to recreate the device tree correctly).Procedure:On node 0b the boot disk is c1t0d0 (c1t1d0 mirror) and this is the VTOC:* Partition  Tag  Flags    Sector     Count    Sector  Mount Directory      0      2    00          0   2106432   2106431      1      3    01    2106432  74630784  76737215      2      5    00          0 143349312 143349311      4      7    00   76737216  50340672 127077887      5      4    00  127077888  14683968 141761855      6      0    00  141761856   1058304 142820159      7      0    00  142820160    529152 143349311We will insert the new disk on node 0b and it will be seen as c1t2d0.1) On node 0b we make a copy via dd from disk c1t0d0s2 to disk c1t2d0s2# dd if=/dev/rdsk/c1t0d0s2 of=/dev/rdsk/c1t2d0s2 bs=8192kA copy of a 72GB disk will take approximately about 45 minutes.Note: as an alternative to make identical copy of root over network follow Document ID: 47498Title: Sun[TM] Cluster 3.0: How to Rebuild a node with Veritas Volume Manager2) Perform an fsck on disk c1t2d0 data slices:   1.  fsck -o f /dev/rdsk/c1t2d0s0 (root)   2.  fsck -o f /dev/rdsk/c1t2d0s4 (/var)   3.  fsck -o f /dev/rdsk/c1t2d0s5 (/usr)   4.  fsck -o f /dev/rdsk/c1t2d0s6 (/globaldevices)3) Mount the root file system in order to edit following files for changing the node name:# mount /dev/dsk/c1t2d0s0 /mntChange the hostname from 0b to 0a:# cd /mnt/etc# vi hosts # vi hostname.bge0 # vi hostname.bge2 # vi nodename 4) Change the /mnt/etc/vfstab from the actual:/dev/md/dsk/d201        -       -       swap    -       no      -/dev/md/dsk/d200        /dev/md/rdsk/d200       /       ufs     1       no      -/dev/md/dsk/d205        /dev/md/rdsk/d205       /usr    ufs     1       no      logging/dev/md/dsk/d204        /dev/md/rdsk/d204       /var    ufs     1       no      logging#/dev/md/dsk/d206       /dev/md/rdsk/d206       /globaldevices  ufs     2       yes     loggingswap    -       /tmp    tmpfs   -       yes     -/dev/md/dsk/d206        /dev/md/rdsk/d206       /global/.devices/node@2 ufs     2       noglobalto this (unencapsulate disk from SDS/SVM):/dev/dsk/c1t0d0s1        -       -       swap    -       no      -/dev/dsk/c1t0d0s0       /dev/rdsk/c1t0d0s0       /       ufs     1       no      -/dev/dsk/c1t0d0s5       /dev/rdsk/c1t0d0s5       /usr    ufs     1       no      logging/dev/dsk/c1t0d0s4       /dev/rdsk/c1t0d0s4       /var    ufs     1       no      logging#/dev/md/dsk/d206       /dev/md/rdsk/d206       /globaldevices  ufs     2       yes     loggingswap    -       /tmp    tmpfs   -       yes     -/dev/dsk/c1t0d0s6       /dev/rdsk/c1t0d0s6       /global/.devices/node@1 ufs     2       no globalIt is important that global device partition (slice 6) in the new vfstab will point to the physical partition of the disk (in our case slice 6).Be careful with the name you use for the new disk. In this case we define it as c1t0d0 because we will insert it as target 0 in node 0a.But this could be different based on the configuration you are working on.5) Remove following entry from /mnt/etc/system (part of unencapsulation procedure):rootdev:/pseudo/md@0:0,200,blk6) Correct the link shared -> ../../global/.devices/node@2/dev/md/shared in order to point to the nodeid of node 0a (in our case nodeid 1):# cd /mnt/dev/mdhow it is now.... node 0b has nodeid 2lrwxrwxrwx   1 root     root          42 Mar 10  2005 shared ->../../global/.devices/node@2/dev/md/shared# rm shared# ln -s ../../global/.devices/node@1/dev/md/shared sharedhow is going to be... with nodeid 1 for node 0alrwxrwxrwx   1 root     root          42 Mar 10  2005 shared ->../../global/.devices/node@1/dev/md/shared7) Change nodeid (in our case from 2 to 1):# cd /mnt/etc/cluster# vi nodeid8) Change the file /mnt/etc/path_to_inst in order to reflect the correct nodeid for node 0a:# cd /mnt/etc# vi path_to_instChange entries from node@2 to node@1 with the vi command ":%s/node@2/node@1/g"9) Write the bootblock to the disk... just in case:# /usr/sbin/installboot /usr/platform/sun4u/lib/fs/ufs/bootblk /dev/rdsk/c1t2d0s0Now the disk is ready to be inserted in node 0a in order to bootup the node.10) Bootup node 0a with command "boot -sx"... this is becasue we need to make some changes in ccr files in order to recreate did environment.11) Modify cluster ccr:# cd /etc/cluster/ccr# rm did_instances# rm did_instances.bak# vi directory - remove the did_instances line.# /usr/cluster/lib/sc/ccradm -i /etc/cluster/ccr/directory # grep ccr_gennum /etc/cluster/ccr/directory ccr_gennum -1 # /usr/cluster/lib/sc/ccradm -i /etc/cluster/ccr/infrastructure # grep ccr_gennum /etc/cluster/ccr/infrastructure ccr_gennum -112) Bring the node 0a down again to the ok prompt and then issue the command "boot -r"Now the node will join the cluster and from scstat and metaset command you can verify functionality. Next step is to encapsulate the boot disk in SDS/SVM and create the mirrors.In our case node 0b has metadevice name starting from d200. For this reason on node 0a we need to create metadevice starting from d100. This is just an example, you can have different names.The important thing to remember is that metadevice boot disks have different names on each node.13) Remove metadevice pointing to the boot and mirror disks (inherit from node 0b):# metaclear -r -f d200# metaclear -r -f d201# metaclear -r -f d204# metaclear -r -f d205# metaclear -r -f d206verify from metastat that no metadevices are set for boot and mirror disks.14) Encapsulate the boot disk:# metainit -f d110 1 1 c1t0d0s0# metainit d100 -m d110# metaroot d10015) Reboot node 0a.16) Create all the metadevice for slices remaining on boot disk# metainit -f d111 1 1 c1t0d0s1# metainit d101 -m d111# metainit -f d114 1 1 c1t0d0s4# metainit d104 -m d114# metainit -f d115 1 1 c1t0d0s5# metainit d105 -m d115# metainit -f d116 1 1 c1t0d0s6# metainit d106 -m d11617) Edit the vfstab in order to specifiy metadevices created:old:/dev/dsk/c1t0d0s1        -       -       swap    -       no      -/dev/md/dsk/d100        /dev/md/rdsk/d100       /       ufs     1       no      -/dev/dsk/c1t0d0s5       /dev/rdsk/c1t0d0s5       /usr    ufs     1       no      logging/dev/dsk/c1t0d0s4       /dev/rdsk/c1t0d0s4       /var    ufs     1       no      logging#/dev/md/dsk/d206       /dev/md/rdsk/d206       /globaldevices  ufs     2       yes     loggingswap    -       /tmp    tmpfs   -       yes     -/dev/dsk/c1t0d0s6       /dev/rdsk/c1t0d0s6       /global/.devices/node@1 ufs      2       no  globalnew:/dev/md/dsk/d101        -       -       swap    -       no      -/dev/md/dsk/d100        /dev/md/rdsk/d100       /       ufs     1       no      -/dev/md/dsk/d105        /dev/md/rdsk/d105       /usr    ufs     1       no      logging/dev/md/dsk/d104        /dev/md/rdsk/d104       /var    ufs     1       no      logging#/dev/md/dsk/106       /dev/md/rdsk/d106       /globaldevices  ufs     2       yes     loggingswap    -       /tmp    tmpfs   -       yes     -/dev/md/dsk/d106        /dev/md/rdsk/d106       /global/.devices/node@1 ufs     2       noglobal18) Reboot node 0a in order to check new SDS/SVM boot configuration.19) Label the mirror disk c1t1d0 with the VTOC of boot disk c1t0d0:# prtvtoc /dev/dsk/c1t0d0s2 > /var/tmp/VTOC_c1t0d0 # fmthard -s /var/tmp/VTOC_c1t0d0 /dev/rdsk/c1t1d0s220) Put DB replica on slice 7 of disk c1t1d0:# metadb -a -c 3 /dev/dsk/c1t1d0s721) Create metadevice for mirror disk c1t1d0 and attach the new mirror side:# metainit d120 1 1 c1t1d0s0# metattach d100 d120# metainit d121 1 1 c1t1d0s1# metattach d101 d121# metainit d124 1 1 c1t1d0s4# metattach d104 d124# metainit d125 1 1 c1t1d0s5# metattach d105 d125# metainit d126 1 1 c1t1d0s6# metattach d106 d126

    Read the article

  • Trouble switching to Dvorak on Ubuntu 12.04

    - by Dodgie
    I've decided to switch to Dvorak on my Ubuntu machine, but I'm having some trouble: First, I attempted to do this through the GUI -- System Settings - Keyboard Layout - add layout (plus sign) - English(programmer Dvorak). This didn't work at first, so I restarted my machine. It seemed to work at the password prompt (if only because QWERTY did not), but I couldn't get it to accept my password. I used the virtual keyboard option to enter my password with mouse clicks (the virtual keyboard was using the programmer's Dvorak Standard) and was able to get in that way. Once logged in, however, I was back to QWERTY. Second, I tried to switch on the command prompt -- $ loadkeys /usr/lib/kbd/keytables/dvorak.map The error message I received was "Couldn't get a file descriptor referring to the console " Does anyone know what I'm doing wrong? I've looked for a solution for these problems, but couldn't find anything.

    Read the article

  • Unable to install flash plugin in Ubuntu 12.04

    - by Farhat
    Yesterday I upgraded from Ubuntu 11.10 to Ubuntu 12.04 (64 bit). The upgrade went smoothly (far more than I expected). Unfortunately, I cannot seem to install the flash plugin in either Firefox or Chrome. chrome://plugins does not show flash. I tried 19:17farhat ~$ sudo apt-get install flashplugin-installer Reading package lists... Done Building dependency tree Reading state information... Done flashplugin-installer is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Yet, I cannot seem to find anything related to flash on the system. 19:17farhat ~$ sudo updatedb [sudo] password for farhat: 19:17farhat ~$ locate libflashplayer.so 19:17farhat ~$ locate libflashplayer 19:17farhat ~$ locate libflash /usr/lib/libreoffice/program/libflashlo.so 19:17farhat ~$ I am at the end of everything I know. Any help will be appreciated. I have tried removing and reinstalling the package. Still the same results.

    Read the article

  • How can I relaunch juju daemons without stop/starting local LXC VMs

    - by vaab
    I'm using juju in local mode with LXC. I updated juju on the host with a classical: apt-get install juju And had a plentyful of python errors in juju debug-log probably because juju processes weren't restarted. In order to restart juju processes, I had to do a complete: juju destroy-environment juju bootstrap which deleted all contents in /var/lib/lxc. I was warned, and this was not an issue, but will be when I'll be in a production environment. Is there a way to relaunch juju daemons without stop/starting LXC local VMs ?

    Read the article

  • How to attach WAR file in email from jenkins

    - by birdy
    We have a case where a developer needs to access the last successfully built WAR file from jenkins. However, they can't access the jenkins server. I'd like to configure jenkins such that on every successful build, jenkins sends the WAR file to this user. I've installed the ext-email plugin and it seems to be working fine. Emails are being received along with the build.log. However, the WAR file isn't being received. The WAR file lives on this path in the server: /var/lib/jenkins/workspace/Ourproject/dist/our.war So I configured it under Post build actions like this: The problem is that emails are sent but the WAR file isn't being attached. Do I need to do something else?

    Read the article

  • Can't find openjdk's jre? No Java plugin in Chrome web browser.

    - by Patryk
    I have recently installed openjdk just to try out writing some java application $ dpkg -l | grep jdk ii openjdk-7-jdk 7u7-2.3.2a-0ubuntu0.12.04.1 OpenJDK Development Kit (JDK) ii openjdk-7-jre 7u7-2.3.2a-0ubuntu0.12.04.1 OpenJDK Java runtime, using Hotspot JIT ii openjdk-7-jre-headless 7u7-2.3.2a-0ubuntu0.12.04.1 OpenJDK Java runtime, using Hotspot JIT (headless) ii openjdk-7-jre-lib 7u7-2.3.2a-0ubuntu0.12.04.1 OpenJDK Java runtime (architecture independent libraries) That's what I have on my system. Although I have all this installed when in Chrome I go to a website which needs jre it can't find it. How can I fix it ?

    Read the article

  • "Cannot import name genshi" error when installing the Swab library

    - by ATMathew
    I'm trying to install the Swab library for Python 2.6 in Ubuntu 10.10. However, I get the following error messages when I try to import it. In the terminal I ran: sudo easy_install swab sudo easy_install Genshi In the Python interpreter I ran: >>> import swab Traceback (most recent call last): File "<stdin>", line 1, in <module> File "/usr/local/lib/python2.6/dist-packages/swab-0.1.2-py2.6.egg/swab/__init__.py", line 23, in <module> from pestotools.genshi import genshi, render_docstring ImportError: cannot import name genshi I don't know whats going on. can anyone help.

    Read the article

  • Facing problem with "gtk.RESPONSE_OK" in the simple-player quickly tutorial

    - by sumit_gt
    I am fairly new to both quickly and Python. I am facing several problems while learning to use quickly from the following tutorial on the Ubuntu developers site: http://developer.ubuntu.com/resources/app-developer-cookbook/multimedia/creating-a-simple-media-player/ The following error I'm unable to understand: Traceback (most recent call last): File "/home/sumit/Sumit/simple-player/simple_player/SimplePlayerWindow.py", line 36, in on_openbutton_clicked if response==gtk.RESPONSE_OK: NameError: global name 'gtk' is not defined I realize that I am supposed to import something, so I tried to add import gtk which it didn't work and it gave the following error: from gtk import _gtk /usr/lib/python2.7/dist-packages/gtk-2.0/gtk/__init__.py:40: Warning: g_type_get_qdata: assertion `node != NULL' failed from gtk import _gtk I have followed every step of the tutorials so far. But there is no mention of any other imports other that "prompts" and "os". Please help. Contribution of Agmenor, facing the same problem: I also tried to replace the text if response == gtk.RESPONSE_OK: by if response == Gtk.RESPONSE_OK: (notice the capital G). This gives another error: AttributeError: 'gi.repository.Gtk' object has no attribute 'RESPONSE_OK'

    Read the article

  • Is LightDM is broken? Autologin works

    - by Ben
    I recently upgraded my Mythbuntu box to 11.10. LightDM worked for a while and then I configured autologin on my user account. After some time, I've removed some packages to lean down the system. Now when I log out (from either Unity or Gnome Shell) I lose the X session, LightDM doesn't start back up. If I disable autologin through /etc/lightdm/lightdm.conf I get no login screen & no X. As I said, autologin works and gives me a Ubuntu Classic desktop. This is the only reference in dmesg to lightdm; [ 17.351023] type=1400 audit(1329530135.420:19): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=1097 comm="apparmor_parser" Can anyone help?

    Read the article

  • PPTP VPN + Ubuntu

    - by StalkerNOVA
    I have problems with connection to DD-WRT router with PPTP server installed. Win7 has no problems with connection to it. But in Ubuntu I'm getting all the time: Dec 28 21:52:14 IT-nb pppd[4209]: Plugin /usr/lib/pppd/2.4.5//nm-pptp-pppd-plugin.so loaded. Dec 28 21:52:14 IT-nb pppd[4209]: pppd 2.4.5 started by root, uid 0 Dec 28 21:52:14 IT-nb pppd[4209]: Using interface ppp0 Dec 28 21:52:14 IT-nb pppd[4209]: Connect: ppp0 <--> /dev/pts/2 Dec 28 21:52:18 IT-nb pppd[4209]: Connection terminated. Dec 28 21:52:18 IT-nb pppd[4209]: Exit.

    Read the article

  • Running 32-bit Firefox with sun-jre in 64-bit Ubuntu

    - by rojanu
    I am trying to run juniper networks connect program to vpn into work and it only works on 32bit sun jre. All the things I have found with google failed so far. I can't use any scripts, like madscientists, as part of the authentication I need to provide some random characters from a grid. So to isolate this 32bit app install to a corner, I downloaded firefox and jre and unpack them to /opt. I run firefox with sudo as Juniper asks for root password. Here is Firefox plugins folder /ot/firefox32/plugins# ls -la total 8 drwxr-xr-x 2 root root 4096 Mar 11 00:57 . drwxr-xr-x 11 root root 4096 Mar 10 23:48 .. lrwxrwxrwx 1 root root 49 Mar 11 00:57 libnpjp2.so -> /opt/java/32/jdk1.6.0_31/jre/lib/i386/libnpjp2.so Firefox lists sun jre but when check it with "http://java.com/en/download/installed.jsp" it either can't detect java or Firefox freezes Any Ideas? Thanks

    Read the article

  • How do I Set PATH in /etc/profile.d?

    - by Rodrigo Sasaki
    I'm using zsh as my shell, and I'm trying to configure my environment. I usually define my $JAVA_HOME variable by creating a file: /etc/profile.d/java.sh with the following content export JAVA_HOME=/path/to/jdk export PATH=$JAVA_HOME/bin:$PATH then I logout and back in, and it all works, but for some reason the PATH variable is not set. It recognizes JAVA_HOME, but not the new PATH, see this terminal snippet: ~ echo $JAVA_HOME /usr/lib/jvm/jdk1.8.0_05 ~ echo $PATH /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games and I confirmed it by trying to run a command form the jvm ~ java -version zsh: command not found: java the PATH doesn't include the $JAVA_HOME as it should. is there something else I should check? EDIT I have checked that if I run source /etc/profile.d/java.sh it all runs correctly and my variables get set as they should, but shouldn't the scripts in /etc/profile.d run automatically?

    Read the article

  • AWStats: cannot access /var/log/apache2/access.log

    - by Joril
    I installed awstats on my new Ubuntu Lucid server, but when cron tries to run it as user www-data, it complains that cannot access /var/log/apache2/access.log: Permission denied. In /usr/share/doc/awstats/README.Debian there's this paragraph: By default Apache stores (since version 1.3.22-1) logfiles with uid=root and gid=adm, so you need to either... 1) Change the rights of the logfiles in /etc/logrotate.d/apache so that www-data has at least read access. 2) As 1) but change to a specific user, and use the suEXEC feature of Apache to run as same user (and either change the right of /var/lib/awstats as well or use another directory). This is more complicated, but then the logs are not generally accessible to the server (which was probably the point of the Apache default). 3) Change awstats.pl to group adm (but beware that you are then taking the risk of allowing a CGI-script access to admin stuff on the machine!). I'd go with 1, but what are the recommended permissions to grant?

    Read the article

  • running apt-get update shows GPG error

    - by Dinesh
    I am getting below GPG error on running the command sudo apt-get update. W: GPG error: http://in.archive.ubuntu.com precise Release: The following signatures were invalid: BADSIG 40976EAF437D05B5 Ubuntu Archive Automatic Signing Key <[email protected]> W: Duplicate sources.list entry http://archive.canonical.com/ubuntu/ precise/partner i386 Packages (/var/lib/apt/lists/archive.canonical.com_ubuntu_dists_precise_partner_binary-i386_Packages) Also, I am not able to install applications from software center. Every time I install it shows a dialog box with the message, Requires Installation of Untrusted packages The action would require the installation of packages from not authenticated sources. OK or Repair options does nothing.

    Read the article

  • Software center not opening

    - by kishore kumar
    $ software-center 2012-09-07 18:45:04,349 - softwarecenter.fixme - WARNING - logs to the root logger: '('/usr/lib/python2.7/dist-packages/dbus/proxies.py', 410, '_introspect_error_handler')' 2012-09-07 18:45:04,349 - dbus.proxies - ERROR - Introspect error on :1.128:/com/ubuntu/Softwarecenter: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. 2012-09-07 18:45:29,406 - softwarecenter.ui.gtk3.app - INFO - setting up proxy 'None' 2012-09-07 18:45:29,409 - softwarecenter.db.database - INFO - open() database: path=None use_axi=True use_agent=True 2012-09-07 18:45:29,822 - softwarecenter.backend.reviews - WARNING - Could not get usefulness from server, no username in config file 2012-09-07 18:45:29,973 - softwarecenter.ui.gtk3.app - INFO - show_available_packages: search_text is '', app is None. 2012-09-07 18:45:29,991 - softwarecenter.db.pkginfo_impl.aptcache - INFO - aptcache.open() Killed

    Read the article

  • Why can't I use Unity 3D on a ATI Mobility Radeon HD 4200 Series with FGLRX drivers?

    - by user88257
    With a brand new install of 12.04 on my Dell Inspiron M5030, Unity 3D appears to load everything but the icons in the top left, and I am unable to click on anything. Unity 2D seems to works fine however. I have done nothing except install Synaptic Package manager and follow this guide to install FGLRX Drivers under Settings ? Additional Drivers, the driver shows as installed and functioning. Also after running: /usr/lib/nux/unity_support_test -p, I get this: OpenGL vendor string: ATI Technologies Inc. OpenGL renderer string: ATI Mobility Radeon HD 4200 Series OpenGL version string: 3.3.11653 Compatibility Profile Context Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: yes I am unsure as to what the problem is. I have tried the non-proprietary drivers, I could not get them to work either, but I would be willing to try again.

    Read the article

  • Error when setting Piwik analytics

    - by bertran
    I've uploaded the latest version of Piwik unto my web server, which is hosted by go daddy.com, on a linux hosting plan. I'm setting it up (accessing it from my browser as instructed) and I have the "Piwikinstallation" page open on step 3 (database set-up ) of 9. I don't know what to imput in the field "database server"... the default is the number 127.0.0.1 When I leave that input as is, and click "Next" leaving the gives the error: "Error when trying to connect to database server: SQLSTATE[HY000] [2013] Lost connection to MySQL server at 'reading initial communication packet', system error: 111" and changing that input to "localhost" gives me another error: "Error when trying to connect to database server:SQLSTATE[HY000] [2002] Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)"

    Read the article

< Previous Page | 139 140 141 142 143 144 145 146 147 148 149 150  | Next Page >