Search Results

Search found 14610 results on 585 pages for 'session storage'.

Page 143/585 | < Previous Page | 139 140 141 142 143 144 145 146 147 148 149 150  | Next Page >

  • WNDR3700 Router + Cisco SG200-08 + LACP + Dual Uplink

    - by kobaltz
    Background I have a storage server that has several virtual machine images stored on them. I would store them locally, but I have limited space on my desktop (using SSD storage). I would like to increase the bandwidth between the desktop and the storage server by using two NICs on each computer. My original configuration allowed about 55MBps between the desktop and storage server. This storage server also has several TBs of documents, pictures, movies, vms, and ISO/programs. The storage server has 8 1.5TB hard drives in a RAID 10 configuration with a hardware RAID controller. The benchmarks on the RAID 10 are about 300MBps. Configuration In short, I am trying to bridge my switch and router. The switch is a small 8 port Cisco smart switch that supports 802.3ad LACP. I have two computers plugged into the switch, each with 2 Intel Gigabit NICs. The first computer is a Windows 7 machine that has the Intel ANS software installed. I have LACP configured with the computer and now show 3 NICs (2 Physical + 1 TEAM Virtual @ 2Gbps). It looks like this computer is configured correctly. I trunked the two ports that this computer is plugged into with the switch's web interface. The second computer is a homebrew storage box running debian. I also have the bonding enabled on this machine and the switch configured with LACP. Without having the WNDR3700 router in the picture yet, I am able to communicate between the Windows 7 machine and the debian box since they both have static IP addresses. With LACP enabled on both machines I am getting about 106-108MBps speeds. Issue I plug in a network cable from the switch into the router and enable DHCP on the desktop. I saw no need to have a static address on the desktop. My transfer rates are still from 106MBps-108MBps. While this is still a boost, I am trying to figure out how to get about 140-180MBps. I am thinking that I need to increase the bandwidth from the router to the switch. My switch allows 4 groups for port trunking. I plugged in a second network cable from the router to the switch. My question is, what is the proper way to fix this issue. Should I port trunk the two ports that are going from the switch to the router? Keep in mind that the router is a WNDR3700 and is unsure whether or not it supports LACP. I do have OpenWRT installed on the router, but it still wasn't clear in any documentation that I found if it supported 802.3ad LACP standards. I am also wondering if there needs to be anything changed within the Cisco settings. [Edit] - Corrected some numbers, wasn't really paying attention. It looks like the speeds though at least two NICs are bonded with LACP is still reaching the max bandwidth of one port. Is there a way to configure the switch so that I can increase this bandwidth? Also, on the storage server, I had a couple of extra NICs laying around and threw them on there as well. Another EDIT and More Findings I happened to look at the traffic of each individual NIC and think that I see the problem. I tested with a simple transfer for a 4GB file. I noticed that only one of the NICs was taking the load of the traffic. I then copied the file back to the Storage Server and noticed that the other NIC was sending out the traffic. I have 802.3ad LACP enabled on the two NICs and I see that it gets enabled dynamically on the switch's interface. Should I be using Static Link Aggregation?

    Read the article

  • login as rsh in rhel 6 without entering password

    - by cartmancakes
    I need to be able to login to a RHEL 6 server using rsh (please don't flame me about security, it's irrelevant in this particular instance) as root without having to enter a password. My procedure for setting this up works great in RHEL 5.x, but does not work in RHEL 6. I suspect this has something to do with PAM, but I'm inexperienced with how to use PAM. Can someone help me with this? /etc/pam.d/rsh auth required pam_rhosts.so auth required pam_nologin.so account include common-account password include common-password session required pam_loginuid.so session include common-session /etc/pam.d/rlogin auth required pam_nologin.so auth [user_unknown=ignore success=ok ignore=ignore auth_err=die default=bad] pam_securetty.so auth sufficient pam_rhosts.so auth include common-auth auth required pam_mail.so account include common-account password include common-password session required pam_loginuid.so session include common-session Thanks!

    Read the article

  • Is there a convenient method to pull files from a server in an SSH session?

    - by tel
    I often SSH into a cluster node for work and after processing want to pull several results back to my local machine for analysis. Typically, to do this I use a local shell to scp from the server, but this requires a lot of path manipulation. I'd prefer to use a syntax like interactive FTP and just 'pull' files from the server to my local pwd. Another possible solution might be to have some way to automatically set up my client computer as an ssh alias so that something like scp results home:~/results would work as expected. Is there any obscure SSH trick that'll do this for me? Working from grawity's answer, a complete solution in config files is something like local .ssh/config: Host ex HostName ssh.example.com RemoteForward 10101 localhost:22 ssh.example.com .ssh/config: Host home HostName localhost Port 10101 which lets me do commands exactly like scp results home: transferring the file results to my home machine.

    Read the article

  • USB connection is unstable with Nexus S 2.3.4 on AMD 64 running 64-bit Windows 7, but works with 32-bit Windows Vista

    - by Mike
    The USB connection is unstable with Nexus S (Android 2.3.4) on AMD 64 running 64-bit Windows 7, but it works with 32-bit Windows Vista. Problem Description: On the 64-bit Windows 7 machine my Nexus S appears to connect, but then it disconnects moments later. Neither accessing USB storage or loading an Android application package file (APK) using the Android Debug Bridge (ADB) work. On 32-bit Windows Vista using the same USB cable, USB storage works. I haven't tried the ADB on 32-bit Windows Vista. Reproduction steps for USB storage: (I have provided the reproduction steps for USB storage and not ADB, because if one isn't working, then the other isn't working either and the USB storage reproduction steps are shorter to document.) Connect the USB cable to the Nexus S and my Windows 7 machine. Effect: The "USB Mass Storage, USB Connected" dialog appears with the button "Turn on USB storage." Click "Turn on USB Storage" Effect: The "working circle" appears. A dialog briefly appears saying "USB storage in use," then it either returns me to Step 1 (now that I am running 2.3.4) or is replaced with the Nexus S's application homepage (while I was running 2.3.3). I'm not sure if the version matters, but I mention it for completeness. On the 32-bit Windows Vista machine the connection is stable. I am able to navigate through the Nexus S file system create, read, update, and delete files, etc. I haven't tried connecting with the ADB. Troubleshooting summary: Tried and failed: Uninstalling and reinstalling the Android USB drivers including removing the files. Uninstalling my custom software Pulling the Nexus S's battery Restarting the Nexus S Restarting 64-bit Windows 7 Changing USB ports on the 64-bit Windows 7 box Compared the dates and file size on the DLLs in my google-usb_driver\amd64 directory and the windows\System32 directory. They match. The sizes for the google-usb_driver\i386 directory do not match (expected). Turning off Debugging mode on the Nexus S does not resolve the problem. Searching Google. Tried and succeeded: Connecting to another machine (Windows Vista) using the same USB cable and Nexus S phone. Troubleshooting observations: I notice that uninstalling the device drivers and deleting the files, then reinstalling the drivers, then rebooting 64-bit Windows 7 then unplugging the Nexus S, then plugging it back in occasionally helps for a short amount of time (minutes to hours, not days). When it is working, I can both access the Nexus S's drive and load/test applications using the ADB. I have observed some wonky behavior in the Device Manager that I haven't tracked down. Sometimes the black Nexus S image appears in the list of devices. Sometimes the image displays as a computer with a green ISA card. Sometimes it neither appears on the top level of devices nor under “other devices,” but it does appear under "disk drives" as "Android UMS Composite USB Device." System configuration: The Nexus S is running Android OS 2.3.4's "Settings\about phone\System updates" indicates that it is up to date as of May 21st 2011. Both 32-bit Windows Vista and 64-bit Windows 7 are up to date. The Windows Vista system is running on an Intel 32-bit processor. Windows 7 is running on an AMD 64-bit processor. I have done Android development on both systems, but I usually develop on the 64-bit Windows 7 machine.

    Read the article

  • How do I automatically copy data when attaching external storage?

    - by Iceking007
    If I am correct to assume that once I place a DVD/disk in my optical drive (or use a USB flash drive or external HDD for that matter; for arguments sake) that this action would in effect trigger an 'event' in Windows. I would like to use this 'triggered event' to enable an entire copy of that device. Example: if my optical H: reads a disk OR the user closes the tray OR ... then xcopy /S H: "F:\Copy of H"

    Read the article

  • Where does Firefox store the opened windows/tabs/urls for Session Restore after a crash?

    - by jens
    In which location and file does Firefox save the last windows I had opened (when Firefox crashed)? I have a complete "hot dump" copy of a file system and need to restore the state Firefox was when the system crashed, but I cannot restore the full backup itself. I can only extract the files of Firefox, but I do not know in which files I have to search for the urls that were last opened when the snapshot of the whole file system was done.

    Read the article

  • Has anybody tried to create a really big storage with ZFS and plain SAS controllers? [closed]

    - by Eccehomo
    I'm considering to build one with something like this: http://www.supermicro.com/products/chassis/4U/847/SC847E26-R1400U.cfm (a chasis with two dual port multipath expanders) http://www.supermicro.com/products/accessories/addon/AOC-SAS2LP-MV8.cfm (4 8-port plain SAS controllers, 2 for each backplane) and 36 Seagate 3Tb SAS drives (ST33000650SS) OS -- FreeBSD. And it's very interesting: How good expander sas backplanes and multipath configurations work with freebsd ? How to locate a specific drive in the bay? (literally -- how to blink an indicator on the drive in freebsd) How to detect a fail of a controller? Will it work together at all? I'm asking to share any experience.

    Read the article

  • Virtual PC in Remote Desktop session runs very slowly??

    - by Michael Bray
    I have a VPN to my work which is quite fast... I Remote Desktop to my work PC, which is running a Microsoft Virtual PC. Working with the PC while I'm actually at work isn't too bad, but when I try to interact with it over the remote desktop, it is VERY slow to respond. Even simple typing can be slow, but screen painting and response time is painfully obvious. Any suggestions to help speed it up?

    Read the article

  • Into Orbit (OBIEE 11g Launch)

    - by Darryn.Hinett
    After much anticipation, it appears that OBIEE 11g is about to hit the streets. Join Charles Phillips, President, and Thomas Kurian, Executive Vice President, Product Development, for the launch of the latest release of Oracle's business intelligence software. Be the first to hear about Oracle Business Intelligence Enterprise Edition 11g, the new, industry-leading technology platform for business intelligence, which offers: A powerful end-user experience with rich visualisation, search, and actionable collaboration Advancements in analytics, OLAP, and enterprise reporting, with unmatched performance and scalability Simplified system configuration, life-cycle management, and performance optimisation As well as the keynote and technical general session, break out sessions will cover the following topics: Business Intelligence: From Insight to Action In this session, you will learn about an exciting, industry-first innovation that connects business intelligence directly to your business processes. You can spot an opportunity or issue, and immediately initiate appropriate action directly from your dashboard. Oracle Business Intelligence Enterprise Edition 11g Systems Management and Deployment Learn how you can streamline the process of configuring your system, provisioning users, and monitoring and optimising query performance. Attend this session to hear how new integration with Oracle Enterprise Manager provides unique systems management, superior scalability, and high availability and security benefits, while making upgrades effortless. Extending Business Intelligence Analytics with Online Analytical Processing (OLAP) Learn how you can enhance the analytical power and business value of your BI solution with a unified environment for navigating and querying both OLAP and relational data sources. This session will focus on how Oracle Business Intelligence Enterprise Edition 11g, used with Oracle Essbase, can deliver insight at the speed of thought. Integrated Performance Management If your organisation is using or considering performance management applications such as Oracle's Hyperion Planning and Hyperion Financial Management, you will not want to miss this session. See how you can leverage Oracle's BI solution for accessing performance management applications and performing extended financial reporting and analysis. Visualisation and End-user Experience The latest release of Oracle Business Intelligence provides an unrivaled end user experience, including rich interactive dashboards, a vast range of animated charting options, integrated search, and more. This session will also include a close look at how you can leverage location data to visualise geo-spatial information.

    Read the article

  • Couldn't pass the signin screen

    - by Amokrane
    I have an issue here with my computer using ubuntu 10.10 on a 64 bits machine. When I start it, I have the login screen, I enter my credentials but instead of starting the session it reloads the login screen again. I checked the disc using fsck and it seems clean. How should I proceed to diagnose and repair this issue? Thanks! [Edit] I went to the log files, this is what I got: auth.log pam_unix (gdm:session): session opened for user amokrane by (uid=0) pam_ck_connector (gdm:session): nox11 mode, ignoring PAM_TTY :0 pam_unix (gdm:session) :session closed for user amokrane messages.log No ACPI video bus found I also took a shot with my camera of the black screen that appears between the two login screens, it says something like: fsck from util-linux-ng 2.17.2 /dev/sdc4 : propre, xxxx files, xxxx blocs Starting AppArmor profiles Skipping profiles in /etc/apparmor.d/disable: usr.bin.firefox Setting sensors limits Starting postgreSQL ... /var/log/Xorg.0.log [ 25.375] (II) intel(0): Modeline "1920x1080"x60.0 172.80 ... [ 28.850] (II) Power Button: Close [ 28.850] (II) UnloadModule: "evdev" [ 29.910] (II) Power Button: Close [ 28.910] (II) UnloadModule: "evdev" [ 28.941] (II) AT Translated Set 2 keyboard: Close [ 29.000] (II) ImPS/2 Generic Wheel Mouse: Close [ 29.000] (II) UnloadModule: "evdev" [ 29.039] ddxSigGiveUp: Closing log Update I tried the following: Ctrl-Alt-F1 on the login screen (to runt the console). sudo pkill startx sudo rm /tmp/.X0-locl startx But it tells me that the x server is already running.

    Read the article

  • SQL Cruise Alaska 2011

    - by Grant Fritchey
    I had the extreme good fortune to get sent on the last SQL Cruise to Alaska. I love my job. In case you don't what this is, SQL Cruise is a trip on a cruise ship during which you get to attend classes while on the boat, learning all about SQL Server and related topics as well as network with the instructors and the other Cruisers. Frankly, it's amazing. Classes ran from Monday, 5/30, to Saturday, 6/4. The networking was constant, between classes, at night on cruise ship, out on excursions in Alaskan rainforests and while snorkeling in ocean waters. Here's a run down of the experience from my point of view. Because I couldn't travel out 2 days early, I missed the BBQ that occurred the day before the cruise when many of the Cruisers received their swag bags. Some of that swag came from Red Gate. I researched what was useful on a cruise like this and purchased small flashlights and binoculars for all the Cruisers. The flashlights were because, depending on your cabin, ships can be very dark. The binoculars were so that the cruisers could watch all the beautiful landscape as it flowed by. I would have liked to have been there when the bags were opened, but I heard from several people that they appreciated the gifts. Cruisers "In" the hot tub. Pictured: Marjory Woody, Michele Grondin, Kyle Brandt, Grant Fritchey, John Halunen Sunday I went to board the ship with my wife. We had a bit of an adventure because I messed up our documents. It all worked out and we got on board to meet up at the back of the boat at one of the outdoor bars with the other Cruisers, thanks to tweets letting everyone know where to go. That was the end of electronic coordination on the trip (connectivity in Alaska was horrible for everyone except AT&T). The Cruisers were a great bunch of people and it was a real honor to meet them and get to spend time with them. After everyone settled into their cabins, our very first activity was a contest, sponsored by Red Gate. The Cruisers, in an effort to get to know each other and the ship, were required to go all over taking various photographs, some of them hilarious. The winning team of three would all win prizes. Some of the significant others helped out and I tagged along with a team that tied for first but lost the coin toss. The winning team consisted of Christina Leo (blog|twitter), Ryan Malcom (twitter), Neil Hambly (blog|twitter). They then had to do math and identify the cabin with the lowest prime number, oh, and get a picture of it and be the first to get back up to the bar where we were waiting. Christina came in first and very happily carried home an Ipad2. Ryan won a 1TB portable hard drive and Neil won a wireless mouse (picture below, note my special SQL Server Central Friday Shirt. Thanks Steve (blog|twitter)). Winners: Christina Leo, Neil Hambly, Ryan Malcolm. Just Lucky: Grant Fritchey Monday morning classes started. Buck Woody (blog|twitter) was a special guest speaker on this cruise. His theme was "Three C's on the High Seas: Career, Communication and Cloud." The first session was all on Career. I'm not going to type out all my notes from the session, but let's just say, if you get the chance to hear Buck talk about how to manage your career, I suggest you attend. I have a ton of blog posts that I'll be putting together over the next several months (yes, months) both here and over on ScaryDBA. I also have a bunch of work I'm going to be doing to get my career performance bumped up a notch or two (and let's face it, that won't be easy). Later on Monday, Tim Ford (blog|twitter) did a session on DMOs. Specifically the session was on Tim's Period Table of DMOs that he has put together, and how to use some of the more interesting DMOs in your day to day job. It was a great session, packed with good information. Next, Brent Ozar (blog|twitter) did a session on how to monitor and guide SAN configuration for the DBA that doesn't have access to the SAN. That was some seriously useful information. Tuesday morning we only had a single class. Kendra Little (blog|twitter) taught us all about "No Lock for Yes Fun".  It was all about the different transaction isolation levels and how they work. There is so often confusion in this area and Kendra does a great job in clarifying the information. Also, she tosses in her excellent drawings to liven up the presentation. Then it was excursion time in Juneau. My wife and I, along with several other Cruisers, took a hike up around the Mendenhall Glacier. It was absolutely beautiful weather and walking through the Alaskan rain forest was a treat. Our guide, Jason, was a great guy and it was a good day of hiking. Wednesday was an all day excursion in Skagway. My wife and I took the "Ghost and Good Time Girls" walking tour that ended up at a bar that used to be a brothel, the Red Onion. It was a great history of the town. We went back out and hit a few museums and exhibits. We also hiked up the side of the mountain to see the Dewey Lake and some great views of the town. Finally we hiked out to the far side of town to see the Gold Rush cemetery. Hiking done we went back to the boat and had a quiet dinner on our own. Thursday we cruised through Glacier Bay and saw at least four different glaciers including sitting next to the Marjory Glacier for  about an hour. It was amazing. Then it got better. We went into class with Buck again, this time to talk about Communication. Again, I've got pages of notes that I'm going to be referring back to for some time to come. This was an excellent opportunity to learn. Snorkelers: Nicole Bertrand, Aaron Bertrand, Grant Fritchey, Neil Hambly, Christina Leo, John Robel, Yanni Robel, Tim Ford Friday we pulled into Ketchikan. A bunch of us went snorkeling. Yes, snorkeling. Yes, in Alaska. Yes, snorkeling in the ocean in Alaska. It was fantastic. They had us put on 7mm thick wet suits (an adventure all by itself) so it was basically warm the entire time we were in the water (except for the occasional squirt of cold water down my back). Before we got in the water a bald eagle flew up and landed about 15 feet in front of us, which was just an incredible event. Then our guide pointed out about 14 other eagles in the area, hanging out in the trees. Wow! The water was pretty clear and there was a ton of things to see. That was absolutely a blast. Back on the boat I presented a session called Execution Plans: The Deep Dive (note the nautical theme). It seemed to go over well and I had several good questions come out of the session that will lead to new blog posts. After I presented, it was Aaron Bertrand's (blog|twitter) turn. He did a session on "What's New in Denali" that provided a lot of great information. He was able to incorporate new things straight out of Tech-Ed, so this was expanded beyond his usual presentation. The man really knows what he's talking about and communicates it well. Saturday we were travelling so there was time for a bunch of classes. Jeremiah Peschka (blog|twitter) did a great overview of some of the NoSQL databases and what they should be used for. The session was called "The Database is Dead" but it was really about how there are specific uses for these databases that SQL Server doesn't fill, but also that these databases can't replace SQL Server in other areas. Again, good material. Brent Ozar presented again with a session on Defensive Indexing. It was an overview of how indexes work and a deep dive into how to apply them appropriately in your databases to better support access. A good session, as you would expect. Then we pulled into Victoria, BC, in Canada and had a nice dinner with several of the Cruisers, including Denny Cherry (blog|twitter). After that it was back to Seattle on Sunday. By the way, the Science Fiction Museum in Seattle isn't a Science Fiction Museum any more. I was very disappointed to discover this. Overall, it was a great experience. I'm extremely appreciative of Red Gate for sending me and for Tim, Brent, Kendra and Jeremiah for having me. The other Cruisers were all amazing people and it was an honor & privilege to meet them and spend time with them. While this was a seriously fun time, it was also a very serious training opportunity with solid information coming from seasoned industry pros.

    Read the article

  • Focus on Identity Management at Oracle OpenWorld12

    - by Tanu Sood
    Heading to Oracle OpenWorld 2012? Then we have Identity Management and relevant sessions all mapped out for you to help you navigate Oracle OpenWorld. Do make use of Focus On Identity Management document online or if you’d like to have a copy handy, use the pdf version instead. In the meantime, here are the 3 must-attend Identity Management sessions for this year: Trends in Identity Management Monday, October 1, at 10:45 a.m., Moscone West L3, room 3003, (session ID# CON9405) Led by Amit Jasuja, this session focuses on how the latest release of Oracle Identity Management addresses emerging identity management requirements for mobile, social, and cloud computing. It also explores how existing Oracle Identity Management customers are simplifying implementations and reducing total cost of ownership. Mobile Access Management Tuesday, October 2, at 10:15 a.m., Moscone West L3, room 3022, (session ID# CON9437) There are now more than 5 billion mobile devices on the planet, including an increasing number of personal devices being used to access corporate data and applications. This session focuses on ways to extend your existing identity management infrastructure and policies to securely and seamlessly enable mobile user access. Evolving Identity Management Thursday, October 4, at 12:45 p.m., Moscone West L3, room 3008, (session ID# CON9640) Identity management requirements have evolved and are continuing to evolve as organizations seek to secure cloud and mobile access. This session explores emerging requirements and shares best practices for evolving your identity management implementation, including the value of a service-oriented, platform approach. For a complete listing of all identity management sessions, hands-on labs, and more, see Focus on Identity Management now. See you at OOW12. 

    Read the article

  • NHibernate Pitfalls: Loading Foreign Key Properties

    - by Ricardo Peres
    This is part of a series of posts about NHibernate Pitfalls. See the entire collection here. When saving a new entity that has references to other entities (one to one, many to one), one has two options for setting their values: Load each of these references by calling ISession.Get and passing the foreign key; Load a proxy instead, by calling ISession.Load with the foreign key. So, what is the difference? Well, ISession.Get goes to the database and tries to retrieve the record with the given key, returning null if no record is found. ISession.Load, on the other hand, just returns a proxy to that record, without going to the database. This turns out to be a better option, because we really don’t need to retrieve the record – and all of its non-lazy properties and collections -, we just need its key. An example: 1: //going to the database 2: OrderDetail od = new OrderDetail(); 3: od.Product = session.Get<Product>(1); //a product is retrieved from the database 4: od.Order = session.Get<Order>(2); //an order is retrieved from the database 5:  6: session.Save(od); 7:  8: //creating in-memory proxies 9: OrderDetail od = new OrderDetail(); 10: od.Product = session.Load<Product>(1); //a proxy to a product is created 11: od.Order = session.Load<Order>(2); //a proxy to an order is created 12:  13: session.Save(od); So, if you just need to set a foreign key, use ISession.Load instead of ISession.Get.

    Read the article

  • Kent .Net/SqlServer User Group – Upcoming events

    - by Dave Ballantyne
    At the Kent user group we have two upcoming events.  Both are to be held at F-Keys Training suite http://f-keys.co.uk/ in Rochester, Kent. If you haven’t attended before please note the location here. 14-June Is your code S.O.L.I.D ? Nathan Gloyn Everybody keeps on about SOLID principles but what are they? and why should you care? This session is an introduction to SOLID and I'll aim to walk through each principle telling you about that principle and then show how a code base can be refactored using the principles to make your life easier, Come the end of the session you should have a basic understanding of the principle, why to use it and how using it can improve your code. Building composite applications with OpenRasta 3 Sebastien Lambla A wave of change is coming to Web development on .NET. Packaging technologies are bringing dependency management to .NET for the first time, streamlining development workflow and creating new possibilities for deployment and administration. The sky's the limit, and in this session we'll explore how open frameworks can help us leverage composition for the web. Register here for this event http://www.eventbrite.com/event/1643797643 05-July Tony Rogerson Achieving a throughput of 1.5Terabytes or over 92,000 8Kbyte of 100% random reads per second on kit costing less that 2.5K, and of course what to do with it! The session will focus on commodity kit and how it can be used within business to provide massive performance benefits at little cost. End to End Report Creation and Management using SQL Server Reporting Services  Chris Testa-O'NeillThis session will walk through the authoring, management and delivery of reports with a focus on the new features of Reporting Services 2008 R2. At the end of this session you will understand how to create a report in the new report designer. Be aware of the Report management options available and the delivery mechanisms that can be used to deliver reports. Register here for this event http://www.eventbrite.com/event/1643805667 Hope to see you at one or other ( or even both if you are that way inclined).

    Read the article

  • bluetooth daemon not running at startup

    - by ffaxer
    I'm trying to connect a bluetooth mouse to my Xubuntu system using Blueman (v. 1.21) Problem seems to be bluetoothd not running at startup, so blueman refuses to start, only a dialog appears: "Bluez daemon is not running, blueman-manager cannot continue." On my system, bluetoothd will run only as root (sudo), so my current workaround is simply to sudo bluetoothd manually, which works fine but id like to have it run at startup so that my mouse is just working without any interaction from me, if possible. If i try to start bluetoothd as non-root it reports: Bluetooth deamon 4.91 Unable to get on D-Bus In the startup scripts i found the same bluetoothd script in all runlevels and init.d: DAEMON=/usr/sbin/bluetoothd test -f /usr/sbin/bluetoothd || exit 0 # bluetoothd normally starts up by udev rules. it needs dbus to function, log_progress_msg "bluetoothd" pkill -TERM bluetoothd || true log_progress_msg "bluetoothd" I looked in /etc/udev/rules.d/ but no reference to bluetoothd. Further i have already tried with no luck: Editing /etc/dbus-1/system.d/bluetooth.conf to include my user (essentially copying the part that was for root): I tried it while both keeping the root policy and without, still, no luck! Editing /etc/pam.d/common-session and /etc/pam.d/gdm to include the line: session optional pam_ck_connector.so In the case of common-session it was already there but with a "nox11" which i tried removing. No luck no luck. Btw, I'm confused as to which session manager I'm using, since i have both xfce4-session and gdm-session-worker running. Anyways, hope someone is savvy enough to figure it out or bring some hints, otherwise i sincerely apologize for wasting your time! I'll sign off with uname -a: Linux [mycompname] 3.0.0-9-lowlatency #12ppa1~natty1-Ubuntu SMP PREEMPT Mon Aug 22 06:52:15 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux Peace B)

    Read the article

  • Advisor Webcasts in July for the EBS Technology area

    - by Oracle_EBS
    For July 2012 we have scheduled 2 Webcasts: The first one is an E-Business Suite OAM Overview and Usage session. The second is about the E-Business Suite Workflow Avisor as a follow-up session. As every time we are driving 2 sessions for a better global alignment : E-Business Suite - OAM Overview and Monitoring Agenda Oracle Applications Manager (OAM) Overview Log files Diagnostics and Logging Concurrent processing through OAM Applications Dashboard Troubleshooting Patch Management. Patch Wizard OAM "How To" Documents Questions &Answers EMEA Session : July 10, 2012 at 09:00 AM UK / 10:00 AM CET / 13:30 India / 17:00 Japan / 18:00 Australia Details & Registration : Note 1466056.1 Direct link to register in WebEx US Session : July 11, 2012 at 18:00 UK / 19:00 CET / 10:00 AM Pacific / 11:00 AM Mountain/ 01:00 PM Eastern Details & Registration : Note 1466057.1 Direct link to register in WebEx E-Business Suite - Workflow Analyzer - Follow-Up Agenda Overview of Workflow Analyzer Enhancements implemented in the latest Release Questions & Answers EMEA Session : July 24, 2012 at 09:00 AM UK / 10:00 AM CET / 13:30 India / 17:00 Japan / 18:00 Australia Details & Registration : Note 1466058.1 Direct link to register in WebEx US Session : July 25, 2012 at 18:00 UK / 19:00 CET / 10:00 AM Pacific / 11:00 AM Mountain/ 01:00 PM Eastern Details & Registration : Note 1466059.1 Direct link to register in WebEx Schedules, recordings and the Presentations of the Advisor Webcast drove under the EBS Applications Technology area can be found in Note 1186338.1. Current Schedules of Advisor Webcast for all Oracle Products can be found on Note 740966.1 Post Presentation Recordings of the Advisor Webcasts for all Oracle Products can be found on Note 740964.1

    Read the article

  • TechEd North America 2012–Day 3 #msTechEd #teched

    - by Marco Russo (SQLBI)
    Yesterday I spent the longest day at this TechEd: we talked with many people at Community Night until 9pm and I have to say that just a few months after Analysis Services 2012 has been released, there are many people already using it. And the adoption of PowerPivot is starting to be quite large. Many new ideas and challenging coming from several different real world scenarios. I was tired but really happy. Alberto presented his Many-to-Many Relationships in BISM Tabular session that was in the same time slot of the BI Power Hour. For this reason, very few people attended Alberto’s session so I think many will watch the recorded session (it should be available within a few days). So what about today? I’ll spend some time at Technical Learning Center area (full schedule here) but the most important event today will be the Querying multi-billion rows with many to many relationships in SSAS Tabular (xVelocity) at the Private Cloud, Public Cloud and Data Platform Theater in the Technical Learning Center area (next to the SQL Server 2012 zone).  Why you should attend? Mainly because you will see live demo over 4 billion rows table with many-to-many relationships involved in complex queries. But for those of you that think this is not enough to attend a 15 minute funny session, well, we’ll give away some 8GB USB Memory Keys to those of you that will guess exact response time of queries before execution. Convinced? Join us at 11:15am and don’t be late, the session will finish at 11:30am! After that, we’ll run a book signing session at the Bookstore at 12:30pm and I will be in the Technical Learning Center area at 3:00pm until 5:00pm. See you there!

    Read the article

  • How should I determine if a user is logged in graphically while lightdm is running?

    - by Jack
    I want to know if someone is logged into a local X-session. In the past I looked at the output of ck-list-sessions. The output looked something like this: Session12: unix-user = '[redacted]' realname = '[redacted]' seat = 'Seat1' session-type = '' active = TRUE x11-display = ':0' x11-display-device = '/dev/tty8' display-device = '' remote-host-name = '' is-local = TRUE on-since = '2012-10-22T18:17:55.553236Z' login-session-id = '4294967295' If no one was logged in, there was no output. I checked if someone was logged in with ck_result" string => execresult("/usr/bin/ck-list-sessions | /bin/grep x11 | /usr/bin/cut --delimiter=\\' -f 2 | /usr/bin/wc -w This no longer works, because lightdm greeter looks like a logged in user Session12: unix-user = '[redacted]' realname = 'Light Display Manager' seat = 'Seat1' session-type = 'LoginWindow' active = TRUE x11-display = ':0' x11-display-device = '/dev/tty8' display-device = '' remote-host-name = '' is-local = TRUE on-since = '2012-10-22T22:17:55.553236Z' login-session-id = '4294967295' I guess I could check session-type, but I don't know how to do that and check x11-display in one-liner. I then need to write my own script, but at that point I thought I would check if anyone else has already done the work or if there is a way to get ConsoleKit to tell me what I want (or if I should be using a different tool)?

    Read the article

  • Couldn't pass the signin screen on ubuntu

    - by Amokrane
    I have an issue here with my computer using ubuntu 10.10 on a 64 bits machine. When I start it, I have the login screen, I enter my credentials but instead of starting the session it reloads the login screen again. I checked the disc using fsck and it seems clean. How should I proceed to diagnose and repair this issue? Thanks! [Edit] I went to the log files, this is what I got: auth.log pam_unix (gdm:session): session opened for user amokrane by (uid=0) pam_ck_connector (gdm:session): nox11 mode, ignoring PAM_TTY :0 pam_unix (gdm:session) :session closed for user amokrane messages.log No ACPI video bus found I also took a shot with my camera of the black screen that appears between the two login screens, it says something like: fsck from util-linux-ng 2.17.2 /dev/sdc4 : propre, xxxx files, xxxx blocs Starting AppArmor profiles Skipping profiles in /etc/apparmor.d/disable: usr.bin.firefox Setting sensors limits Starting postgreSQL ... /var/log/Xorg.0.log [ 25.375] (II) intel(0): Modeline "1920x1080"x60.0 172.80 ... [ 28.850] (II) Power Button: Close [ 28.850] (II) UnloadModule: "evdev" [ 29.910] (II) Power Button: Close [ 28.910] (II) UnloadModule: "evdev" [ 28.941] (II) AT Translated Set 2 keyboard: Close [ 29.000] (II) ImPS/2 Generic Wheel Mouse: Close [ 29.000] (II) UnloadModule: "evdev" [ 29.039] ddxSigGiveUp: Closing log Update I tried the following: Ctrl-Alt-F1 on the login screen (to runt the console). sudo pkill startx sudo rm /tmp/.X0-locl startx But it tells me that the x server is already running.

    Read the article

  • Need a Quick Sure Method to Produce a Formatted Explain Plan? This will help!

    - by user702295
    Please use the following on the production machine to get formatted explain plan and sql trace using the SLOW sql (e.g. 'T_COMB_LIST.COMB_ID = 216') or any other value that takes longer: -- Open new session is SQL*Plus */ -- Make sure you are using updated PLAN_TABLE -- This can be done by dropping it and recreate it by running: -- SQL> @?/rdbms/admin/utlxplan.sql) set lines 1000 set pages 1000 spool xplan_1.txt EXPLAIN PLAN FOR <<<<Replace this line with exactly the same query you used above. Force hard parse by modifying the case of a character>>>> @?/rdbms/admin/utlxplp spool off EXIT --Open a second session is SQL*Plus ALTER SESSION SET max_dump_file_size = unlimited; ALTER SESSION SET tracefile_identifier = '10046'; ALTER SESSION SET statistics_level = ALL; ALTER SESSION SET events '10046 trace name context forever, level 12'; <<<<Replace this line with exactly the same query you used above. Force hard parse by modifying the case of a character>>>> select 'verify cursor closed' from dual; ALTER SYSTEM SET EVENTS '10046 trace name context off'; EXIT Make sure spooled file is formatted properly and that the 10046 trace has relevant explain plan in it.  Please Upload both files (10046 trace is generated in udump). Need instructions to find udump?   sqlplus "/ as sysdba" show parameters dump_dest This will show you bdump, cdump and udump locations.

    Read the article

  • Cannot establish ssh connection to computer on local network

    - by ovangle
    I've just (re)installed ubuntu 11.10 on my main pc, and the connection times out every time I try to ssh connect to my laptop (over the local network) to retrieve the files I backed up there. The connection times out every time I try to connect. I can establish a connection in the other direction without issue. Here's the verbose output I get when I try to connect: ovangle@ruby-EP43-DS3:~$ ssh -v [email protected] OpenSSH_5.8p1 Debian-7ubuntu1, OpenSSL 1.0.0e 6 Sep 2011 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 10.1.1.4 [10.1.1.4] port 22. debug1: connect to address 10.1.1.4 port 22: Connection timed out ssh: connect to host 10.1.1.4 port 22: Connection timed out ssh is installed on both machines, and I've tried deleting '~/.ssh/known_hosts' on both machines, still nada. I've changed the sshd logging on the laptop to VERBOSE and restarted the daemon (because I wasn't getting any relevant syslog entries otherwise), and this is the log for the most recent connection attempt. EDIT: posted wrong logs last time. They just showed that there was a connection received, they weren't actually the sshd logs (which were in auth.log as I recently discovered). Unfortunately, that log is filling up with extremely weird error messages and it gives me no information about the connection. Nov 8 16:02:18 ovangle-A6Rp pkexec: pam_unix(polkit-1:session): session opened for user root by (uid=1000) Nov 8 16:02:18 ovangle-A6Rp pkexec: pam_ck_connector(polkit-1:session): cannot determine display-device Nov 8 16:02:18 ovangle-A6Rp pkexec[6270]: ovangle: Executing command [USER=root] [TTY=unknown] [CWD=/home/ovangle] [COMMAND=/usr/sbin/gnome-power-backlight-helper --set-brightness 2] Nov 8 16:02:19 ovangle-A6Rp pkexec: pam_unix(polkit-1:session): session opened for user root by (uid=1000) Nov 8 16:02:19 ovangle-A6Rp pkexec: pam_ck_connector(polkit-1:session): cannot determine display-device Nov 8 16:02:19 ovangle-A6Rp pkexec[6273]: ovangle: Executing command [USER=root] [TTY=unknown] [CWD=/home/ovangle] [COMMAND=/usr/sbin/gnome-power-backlight-helper --set-brightness 7]

    Read the article

  • Are Vala and desktopcouch ready?

    - by pavolzetor
    Hi, I have started writting rss reader in Vala, but I don't know, what database system should I use, I cannot connect to couchdb and sqlite works fine, but I would like use couchdb because of ubuntu one. I have natty with latest updates public CouchDB.Session session; public CouchDB.Database db; public string feed_table = "feed"; public string item_table = "item"; public struct field { string name; string val; } // constructor public Database() { try { this.session = new CouchDB.Session(); } catch (Error e) { stderr.printf ("%s a\n", e.message); } try { this.db = new CouchDB.Database (this.session, "test"); } catch (Error e) { stderr.printf ("%s a\n", e.message); } try { this.session.get_database_info("test"); } catch (Error e) { stderr.printf ("%s aa\n", e.message); } try { var newdoc = new CouchDB.Document (); newdoc.set_boolean_field ("awesome", true); newdoc.set_string_field ("phone", "555-VALA"); newdoc.set_double_field ("pi", 3.14159); newdoc.set_int_field ("meaning_of_life", 42); this.db.put_document (newdoc); // store document } catch (Error e) { stderr.printf ("%s aaa\n", e.message); } reports $ ./xml_parser rss.xmlCannot connect to destination (127.0.0.1) aa Cannot connect to destination (127.0.0.1) aaa

    Read the article

< Previous Page | 139 140 141 142 143 144 145 146 147 148 149 150  | Next Page >