Search Results

Search found 3730 results on 150 pages for 'bash'.

Page 144/150 | < Previous Page | 140 141 142 143 144 145 146 147 148 149 150  | Next Page >

• Run a command as cron would but from the command line.

  - by BCS

  I have a script that I'm trying to run from cron. When I run it from bash, it work just fine. However when I let cron do it's thing, I get a: myscript.sh: line 122: syntax error: unexpected end of file What I want is a way to run a command as if it was a cron job, but do it in my shell. As a side note: does anyone know what would be differnt under cron? (the script already has a #!/bin/sh line) To answer my own question: I added this to my crontab: * * * * * bcs for ((i=1; i <= 55; i++)) ; do find ~/.crontemp/ -name '*.run' -exec "{}" ";" ; sleep 1; done` and created this script: #!/bin/sh tmp=$(mktemp ~/.crontemp/cron.XXXXX) mknod $tmp.pipe p mv $tmp $tmp.pre echo $* '>' $tmp.pipe '1>&2' >> $tmp.pre echo rm $tmp.run >> $tmp.pre chmod 700 $tmp.pre mv $tmp.pre $tmp.run cat $tmp.pipe rm $tmp.pipe With that, I can run an arbitrary command with a delay of not more than one second. (And yes, I know there are all kinds of security issue involved in that)

  Read the article

• Unmanaged Process in Mono

  - by Residuum

  I want to start a quite expensive process (jackd) from a Mono application, and do not need full access to the process from the application itself. As the process is so expensive in terms of CPU usage, a Glib.IdleHandler for polling the process will not work, as it is never executed, and the GUI becomes unresponsive. Is there any way to have the cake and eating it at the same time in Mono? EDIT: I only need to be able to start and stop the process from Mono, I do not need information about the state of the process or if it has exited, as my application will register itself as a client to jackd, basically I need a "replacement" for bash's jackd &>/dev/null 2>&1 & for the System.Diagnostics.Process ;). Here is what I have so far for starting and stopping the process: public void StartJackd() { _jackd = new Process (); _jackd.StartInfo = _jackdStartup; if (_jackd.Start ()) { _jackd.EnableRaisingEvents = true; _jackd.Exited += JackdExited; } } public void StopJackd() { if (_jackd != null && !_jackd.HasExited) { _jackd.CloseMainWindow (); } } And somewhere else I have this code for registering the IdleHandler: GLib.Idle.Add(new GLib.IdleHandler(UpdateJackdConnections)); This handler will fire all the time, while the process is not running, but never, when jackd is running.

  Read the article

• Compiling Wanderlust for Windows and use it for Gmail.

  - by User1

  I'm trying to get Wanderlust working in Windows to connect to Gmail. Compiling the code is much more painful than expected. Here are the barriers so far: Can't download dependent packages: SEMI, APEL, and FLIM. I eventually found newer versions, but I'm not sure they will work. Anyone have the older versions? Needs make and install. I used MSYS and it seems to have compiled okay. SSL support. I was getting a "Cannot open load file: ssl" error. I found an ssl.el that comes with w3. So installed w3. Bash command in ssl.el: ssl-get-command is running something from /bin/sh (not a directory I have in Windows). I really don't want to refactor this code. Is there a better way? Others speak very highly of Wanderlust, so I want to give it a try. I feel like I'm almost there, but am pretty much worn out with all the crazy configuration I have to do. Does anyone have this working on Windows? I'm pretty sure it will work with Gmail, because of this post. But will it work in Windows too? If you have a few pointers, please help.

  Read the article

• Using awk to return only certain chunks of data

  - by Koriar

  I'm not 100% certain how to phrase my question simply, so I apologize if this has been answered somewhere and I was just unable to find it. What I have are debug logs with authentication packets in them along with a bunch of other output. I need to search through about 2 million lines of logs to find every packet that contains a certain mac address. The packets look something like this (slightly censored): -----------------[ header ]----------------- Event: Authd-Response (1900) Sequence: -54 Timestamp: 1969-12-31 19:30:00 (0) ---------------[ attributes ]--------------- Auth-Result = Auth-Accept Service-Profile-SID = 53 Service-Profile-SID = 49 RADIUS-Access-Accept-Attr/WiMAX-Capability = 0x(numbers) Session-Timeout = 3600 Service-Profile-SID = 4 Service-Profile-SID = 29 Chargeable-User-Identity = "(Numbers)" User-Password = "(the MAC address I'm looking for)" -------------------------------------------- However there are about 10 different possible types with different possible lengths. They all start with the header line and end with the all-dashes line. I've had success using awk to get the code blocks themselves using this: awk '/-----------------\[ header \]-----------------/,/--------------------------------------------/' filename.txt But I was hoping to be able to use it to return only the packets which contain the MAC address that I need. I've been trying to figure this out for a few days now and I'm pretty stuck. I could try and write a bash script, but I could swear that I've used awk to do something like this before...

  Read the article

• How to use a string as a delimiter shell script

  - by Dan

  I am reading a line and am using regex to match it in my script. (/bin/bash) echo $line | grep -E '[Ss][Uu][Bb][Jj][Ee][Cc][Tt]: [Hh][Ee][Ll][Pp]' > /dev/null 2>&1 if [[ $? = "0" && -z $subject ]]; then subject=`echo $line | cut -d: -f2` > /dev/null echo "Was able to grab a SUBJECT $line and the actual subject is -> $subject" >> $logfile fi now my problem is that i use the colon as the delimiter. but sometimes the email will have multiple colons in the subject and so I am not able to grab the whole subject because of that. I am looking for a way to grab everything after the colon following subject. even is there is a way to loop through and check for a colon or what. maybe cut allows you to cut with a string as delimiter? Not sure...any ideas? Thanks!

  Read the article

• Spawning vim from a node git hook

  - by Lawrence Jones

  I've got a project purely in coffeescript, with git hooks for deployment also written in cs. I don't really want to break away from the language just to use bash for a quick commit message formatter, but I've got a problem spawning vim from the commit-msg hook. I've seen here that when piping to vim, the stdio is not necessarily set correctly to the tty streams. I get how that could cause a problem, but I don't exactly know how to get vim to load correctly using nodes spawn command. At the moment I have... vim = (require 'child_process').spawn('vim', [file], stdio: 'inherit') vim.on 'exit', (err) -> console.log "Exited! [#{err}]" cb?() ...which works fine to spawn a vim process that can r/w from the parents stdio, but when I use this in the hook things go wrong. Vim states that the stdio is not from terminal, and then once opened typing causes escape characters to pop up all over the place. Backspace for example, will produce ^?. Any help would be appreciated!

  Read the article

• Can't get node.js built on cygwin

  - by mwt

  Following the instructions here: https://github.com/ry/node/wiki/Building-node.js-on-Cygwin-(Windows) I've tried installing on two machines, either of which I'd be happy to get up and running. WinXP On 'make', I get: Build failed: -> task failed <err #2>: {task: libv8.a SConstruct -> libv8.a} According to the instructions, this is caused by having $SHELL set to a Windows style path, but I've set it to /bin/bash and get the same error. Win7 On './configure', I get: $ ./configure Checking for program g++ or c++ : /usr/bin/g++ Checking for program cpp : /usr/bin/cpp Checking for program ar : /usr/bin/ar Checking for program ranlib : /usr/bin/ranlib Checking for g++ : ok Checking for program gcc or cc : /usr/bin/gcc 0 [main] python 1092 C:\bin\python.exe: *** fatal error - unable to remap \\?\C:\lib\python2.6\lib-dynload\_functools.dll to same address as parent: 0x360000 != 0x3E0000 Stack trace: Frame Function Args 002891E8 6102749B (002891E8, 00000000, 00000000, 00000000) 002894D8 6102749B (61177B80, 00008000, 00000000, 61179977) 0028A508 61004AFB (611A136C, 61241CF4, 00360000, 003E0000) End of stack trace 0 [main] python 3536 fork: child 1092 - died waiting for dll loading, errno 11 /Users/Michael/Desktop/node/wscript:177: error: could not configure a c compiler! I've run 'rebaseall' and restarted the machine but still get that error. Edit: Ok, rebaseall was apparently erroring on some mingw stuff, so I edited the rebaseall script to fix that, and now it configures on Win7. The new problem is that it emits the exact same error as my XP machine now when I try to make. This is on tag v0.3.5.

  Read the article

• Is there a better way to throttle a high throughput job?

  - by ChaosPandion

  I created a simple class that shows what I am trying to do without any noise. Feel free to bash away at my code. That's why I posted it here. public class Throttled : IDisposable { private readonly Action work; private readonly Func<bool> stop; private readonly ManualResetEvent continueProcessing; private readonly Timer throttleTimer; private readonly int throttlePeriod; private readonly int throttleLimit; private int totalProcessed; public Throttled(Action work, Func<bool> stop, int throttlePeriod, int throttleLimit) { this.work = work; this.stop = stop; this.throttlePeriod = throttlePeriod; this.throttleLimit = throttleLimit; continueProcessing = new ManualResetEvent(true); throttleTimer = new Timer(ThrottleUpdate, null, throttlePeriod, throttlePeriod); } public void Dispose() { throttleTimer.Dispose(); ((IDisposable)continueProcessing).Dispose(); } public void Execute() { while (!stop()) { if (Interlocked.Increment(ref totalProcessed) > throttleLimit) { lock (continueProcessing) { continueProcessing.Reset(); } if (!continueProcessing.WaitOne(throttlePeriod)) { throw new TimeoutException(); } } work(); } } private void ThrottleUpdate(object state) { Interlocked.Exchange(ref totalProcessed, 0); lock (continueProcessing) { continueProcessing.Set(); } } }

  Read the article

• How can I get git to work with a remote server?

  - by Adrienne

  I am the CM person for a small company that just started using Git. We have two Git repositories currently hosted on a Windows box that is our all-purpose Windows server. But, we just set up a dedicated server for our CM software on an Ubuntu Linux server named "Callisto". So I created a test Git repository on Callisto. I gave its directory all of the proper permissions recursively. I had the sysadmin create a login for me on Callisto, and I created a key to use for logging in via SSH. I set up my key to use a passphrase; I don't know if that could be contributing to my problems? Anyway, I know my SSH login works because I tested it through puTTY. But, even after hours of trials and head scratching, I can't get my Windows Git bash (mSysGit) to talk to Callisto for the purposes of pushing or pulling Callisto's git repository files. I keep getting "Fatal error. The remote end hung up unexpectedly." And I've even gotten the error that Git doesn't recognize the test repository on Callisto as a git repository. I read online that the "Fatal error...hung up unexpectedly" is usually a problem with the server connection or permissions. So what am I missing or overlooking here? And why doesn't a pull using the git:// protocol work, since that only uses read-only access? Group and public permissions for the git repository's directory on Callisto are set to read and execute, but not write. If anyone could help, I would be so grateful. Thank you.

  Read the article

• SWIG: From Plain C++ to working Wrapper

  - by duckworthd

  Hi everyone. I've been trying to create a SWIG wrapper for this tiny little C++ class for the better part of 3 hours with no success, so I was hoping one of you out there could lend me a small hand. I have the following class: #include <stdio.h> class Example { public: Example(); ~Example(); int test(); }; #include "example.h" Along with the implementation: Example::Example() { printf("Example constructor called\n"); } Example::~Example() { printf("Example destructor called\n"); } int Example::test() { printf("Holy shit, I work!\n"); return 42; } I've read through the introduction page ( www.swig.org/Doc1.3/Java.html ) a few times without gaining a whole lot of insight into the situation. My steps were Create an example.i file Compile original alongside example_wrap.cxx (no linking) link resulting object files together Create a little java test file (see below) javac all .java files there and run Well steps 4 and 5 have created a host of problems for me, starting with the basic ( library 'example' not found due to not being in java's path ) to the weird ( library not found even unless LD_LIBRARY_PATH is set to something, even if it's nothing at all). I've included my little testing code below public class test2 { static { String libpath = System.getProperty("java.library.path"); String currentDir = System.getProperty("user.dir"); System.setProperty("java.library.path", currentDir + ":" + libpath); System.out.println(System.getProperty("java.library.path")); System.loadLibrary("example"); } public static void main(String[] args){ System.out.println("It loads!"); } } Well, if anyone has navigated these murky waters of wrapping, I could not be happier than if you could light the way, particularly if you could provide the example.i and bash commands to go along with it.

  Read the article

• Unix: cannot add "\\ \n" even with escaping to the end of line

  - by HH

  I try to convert clean columnwise data to tables in tex. I am unable to have "\ \n" at each end of line. Please, see the command at the end. Data $ echo `. ./bin/addTableTexTags.sh < .data_3` 10.31 & 8.50 & 7.40 10.34 & 8.53 & 7.81 8.22 & 8.62 & 7.78 10.16 & 8.53 & 7.44 10.41 & 8.38 & 7.63 10.38 & 8.57 & 8.03 10.13 & 8.66 & 7.41 8.50 & 8.60 & 7.15 10.41 & 8.63 & 7.21 8.53 & 8.53 & 7.12 $ cat .data_3 10.31 8.50 7.40 10.34 8.53 7.81 8.22 8.62 7.78 10.16 8.53 7.44 10.41 8.38 7.63 10.38 8.57 8.03 10.13 8.66 7.41 8.50 8.60 7.15 10.41 8.63 7.21 8.53 8.53 7.12 addTableTexTags.sh #!/bin/bash sed -e "s@[[:space:]]@\t\&\t@g" -e "s@[[:space:]]*&*[[:space:]]*\$@\t \\ \\\\n@g" // Tried Escaping "\\" with "/" here and there // but cannot get a line ending with "\\ \n".

  Read the article

• The proper way to script periodically pulling a page from an https site

  - by DarthShader

  I want to create a command-line script for Cygwin/Bash that logs into a site, navigates to a specific page and compares it with the results of the last run. So far, I have it working with Lynx like so: ----snpipped, just setting variables---- echo "# Command logfile created by Lynx 2.8.5rel.5 (29 Oct 2005) ----snipped the recorded keystrokes------- key Right Arrow key p key Right Arrow key ^U" >> $tmp1 #p, right arrow initiate the page saving #"type" the filename inside the "where to save" dialog for i in $(seq 0 $((${#tmp2} - 1))) do echo "key ${tmp2:$i:1}" >> $tmp1 done #hit enter and quit echo "key ^J key y key q key y " >> $tmp1 lynx -accept_all_cookies -cmd_script=$tmp1 https://thewebpage.com/login diff $tmp2 $oldComp mv $tmp2 $oldComp It definitely does not feel "right": the cmd_script consists of relative user actions instead of specifying the exact link names and actions. So, if anything on the site ever changes, switches places, or a new link is added - I will have to re-create the actions. Also, I can't check for any errors so I can't abort the script if something goes wrong (login failed, etc) Another alternative I have been looking at is Mechanize with Ruby (as a note - I have 0 experience with Ruby). What would be the best way to improve or rewrite this?

  Read the article

• shell script stopped working --- need to rewrite?

  - by OopsForgotMyOtherUserName

  The script below worked on my Mac OS X. I'm now using Ubuntu OS, and the script is no longer working. I'm wondering if there's something that I need to change here? I did change the first line from #!/bin/bash to #!/bin/sh, but it's still throwing up an error.... Essentially, I get an error when I try to run it: Syntax error: end of file unexpected (expecting ")") #!/bin/sh REMOTE='ftp.example.com' USER='USERNAME' PASSWORD='PASSWORD' CMDFILE='/jtmp/rc.ftp' FTPLOG='/jtmp/ftplog' PATTERN='SampFile*' date > $FTPLOG rm $CMDFILE 2>/dev/null LISTING=$(ftp -in $REMOTE <<EOF user $USER $PASSWORD cd download ls $PATTERN quit EOF ) echo "open $REMOTE" >> $CMDFILE echo "user $USER $PASSWORD" >> $CMDFILE echo "verbose" >> $CMDFILE echo "bin" >> $CMDFILE echo "cd download" >> $CMDFILE for FILE in $LISTING do echo "get $FILE" >> $CMDFILE done echo "quit" >> $CMDFILE ftp -in < $CMDFILE >> $FTPLOG 2>&1 rm $CMDFILE

  Read the article

• Sharing code between two or more rails apps... alternatives to git submodules?

  - by jtgameover

  We have two separate rails_app, foo/ and bar/ (separate for good reason). They both depend on some models, etc. in a common/ folder, currently parallel to foo and bar. Our current svn setup uses svn:externals to share common/. This weekend we wanted to try out git. After much research, it appears that the "kosher" way to solve this is using git submodule. We got that working after separating foo,bar,common into separate repositories, but then realized all the strings attached: Always commit the submodule before committing the parent. Always push the submodule before pushing the parent. Make sure that the submodule's HEAD points to a branch before committing to it. (If you're a bash user, I recommend using git-completion to put the current branch name in your prompt.) Always run 'git submodule update' after switching branches or pulling changes. All these gotchas complicate things further than add,commit,push. We're looking for simpler ways to share common in git. This guy seems to have success using the git subtree extension, but that deviates from standard gitand still doesn't look that simple. Is this the best we can do given our project structure? I don't know enough about rails plugins/engines, but that seems like a possible RoR-ish way to share libraries. Thanks in advance.

  Read the article

• Execute external program from Java

  - by Saurabh Lalwani

  Hi, I am trying to execute a program from the Java code. Here is my code: public static void main(String argv[]) { try { String line; Process p = Runtime.getRuntime().exec( "/bin/bash -c ls > OutputFileNames.txt"); BufferedReader input = new BufferedReader( new InputStreamReader(p.getInputStream())); while ((line = input.readLine()) != null) { System.out.println(line); } input.close(); } catch (Exception err) { err.printStackTrace(); } } My OS is Mac OS X 10.6. If I remove the "> OutputFileNames.txt" from the getRuntime().exec() method, all the file names are printed on the console just fine. But I need it to be printed to a file. Also, if I change the command to: Process p = Runtime.getRuntime().exec( "cmd \c dir > OutputFileNames.txt"); and run it on Windows, it runs and prints the results in the file perfectly fine too. I have read the other posts for executing another application from Java but none seemed to relate to my problem. I would really appreciate any help I can get. Thanks,

  Read the article

• Getting started with MIT Proto

  - by Charles

  MIT Proto lacks a basic getting started guide. How do I find a shell that accepts commands like (def foo...) and proto -n 1000 -l -m ...? http://groups.csail.mit.edu/stpg/proto.html I can run in my bash shell: ./proto -n 1000 -s 0.1 -T -l "(red (gradient (= (mid) 0)))" I can't figure out how to run e.g. channel.proto: (def channel (src dst width) (let* ((d (distance src dst)) (trail (<= (+ (gradient src) (gradient dst)) (+ d 0.01))) ;; float error ;; (trail (= (+ (gradient src) (gradient dst)) d)) ) (dilate trail width))) ;; To see a channel calculated from geometric primitives, run: ;; proto -n 1000 -l -m -s 0.5 "(blue (channel (sense 1) (sense 2) 10))" ;; click on a device and hit 't' to set up the source, then click on ;; another device and hit 'y' to designate the destination. At first ;; every device will be blue, but then it should clear and you should ;; see a thick blue path connecting the two devices you selected. Thanks! P.S. Somebody please tag this mit-proto. I can't.

  Read the article

• C++: how to build my own utility library?

  - by augustin

  I am starting to be proficient enough with C++ so that I can write my own C++ based scripts (to replace bash and PHP scripts I used to write before). I find that I am starting to have a very small collection of utility functions and sub-routines that I'd like to use in several, otherwise unrelated C++ scripts. I know I am not supposed to reinvent the wheel and that I could use external libraries for some of the utilities I'm creating for myself. However, it's fun to create my own utility functions, they are perfectly tailored to the job I have in mind, and it's for me a large part of the learning process. I'll see about using more polished external libraries when I am proficient enough to work on more serious, long term projects. So, the question is: how do I manage my personal utility library in a way that the functions can be easily included in my various scripts? I am using linux/Kubuntu, vim, g++, etc. and mostly coding CLI scripts. Don't assume too much in terms of experience! ;) Links to tutorials or places where relevant topics are properly documented are welcome.

  Read the article

• Problem with configure script

  - by cube

  I am running into a problem with the ./configure script for ffmpeg. My linux environment uses busybox, which only allows for limited set of linux commands. One command which is used in the ffmpeg ./configure script is mktemp -u, the problem here is the busybox for linux does not recognize the -u switch as valid, so it complains about it and breaks the configure process. This is the relevant code in ./configure which uses the mktemp -u command: if ! check_cmd type mktemp; then # simple replacement for missing mktemp # NOT SAFE FOR GENERAL USE mktemp(){ echo "${2%XXX*}.${HOSTNAME}.${UID}.$$" } fi tmpfile(){ tmp=$(mktemp -u "${TMPDIR}/ffconf.XXXXXXXX")$2 && (set -C; exec > $tmp) 2>/dev/null || die "Unable to create temporary file in $TMPDIR." append TMPFILES $tmp eval $1=$tmp } I am not good with bash scripting at all, so I was wondering if anyone one had an idea on how I can force this configure script to not use mktemp -u and use the 'replacement' alternative option that is available in as per the snippet above. Thanks. btw... simply removing the -u switch does not work. Nor does replacing it with -t, or -p. I believe the mktemp has to be bypassed completely.

  Read the article

• Text replacement for multiple script/config files

  - by user343804

  I am doing some sort of science with a combination of Python, bash scripts and configuration files with weird syntaxes from old C programs. To run different tests, I have to tune (open text file, edit and save) a number of these files, but it is getting harder and harder to remember which files to edit. Also, the tasks are very repetitive and I end having a bunch of comment lines, switching on and off the settings for a specific run. I dream of a tool that can keep a list of files (regardless of the file format) and allow me to centrally choose from a predefined list of "profiles", taking care of editing the script/config files. For example lets say I have a config and script file: config.cfg var1 = 1.0 #var1 = 1.5 script.sct function(200.0) #function(300.0) I would like to instead have auxiliary text files: config.cfg.tem var1 = $$var1$$ script.sct.tem function($$par1$$) and in a central script or even better, a GUI, just switch from profile1 (e.g. var1=1.0,par1=200.0) to profile2 (e.g. var1=1.5,par1=300.0), and the tool to automatically update the text files. Any idea if such a tools exists?

  Read the article

• Shell script for generating HTML out put

  - by user1638016

  The following script is generating the desired out put but not redirecting the result to /home/myuser/slavedelay.html #!/bin/bash host=<ip> echo $host user=usr1 password=mypass threshold=300 statusok=OK statuscritical=CRITICAL for i in ert7 ert9 do echo "<html>" > /home/myuser/slavedelay.html if [ "$i" == "ert7" ]; then slvdelay=`mysql -u$user -p$password -h<ip> -S /backup/mysql/mysql.sock -e 'show slave status\G' | grep Seconds_Behind_Master | sed -e 's/ *Seconds_Behind_Master: //'` if [ $slvdelay -ge $threshold ]; then echo "<tr><td>$i</td><td>CRITICAL</td>" >> /home/myuser/slavedelay.html echo "<tr><td>$i</td><td>CRITICAL</td>" else echo "<tr><td>$i</td><td>OK</td>" >> /home/myuser/slavedelay.html echo "<tr><td>$i</td><td>OK</td>" fi fi done echo "</html>" >> /home/myuser/slavedelay.html If I cat the output file /home/myuser/slavedelay.html it gives. <html> </html> Execution result : sh slave_delay.sh <tr><td>sdb7</td><td>OK</td>

  Read the article

• Looking for PyQt4 embeddable terminal widget

  - by redShadow

  I wrote an application that, among other things, launches some "backend" processes to do some stuff. These subprocesses are very likely to fail or have unexpected behavior since they have to operate in quite hard conditions, so I prefer to give full control over them to the operator. NOTE: I am running these processes using a subprocess module based class instead of QProcess to have some more control functionality over the running process. At the moment, I'm using a QPlainTextEdit widget to which I append standard output/error from the subprocess, plus some buttons to quickly send some common signals (INT, STOP, CONT, KILL, ..), but: In some cases it would be useful to send some input too. Although it could be done with a text input box, I would prefer using something more "professional" Of course, there is no direct way to interpret special control characters, such as color codes, cursor movement, etc.. I had to implement an auto-scroll management of the console, but it is not guaranteed 100% to work nicely (sometimes the scroll locking doesn't work as expected, etc.) So: does anyone know something I could use to accomplish these needs? I found qtermwidget but it seems more oriented on handling a shell process (and the Python bindings seems to let you run /bin/bash only) by itself than communicating with an already existing process I/O.

  Read the article

• Update php 5.2.0 to 5.2.4 with aptitude

  - by Kiva

  Hi guy, I would like to update my php 5 in my server. At this moment, I use php 5.2.0 so I want to update it to php 5.2.4 (not php 5.3). I tried to do this: aptitude update aptitude upgrade 63 packets were updated but not php which is always in 5.0 How can I update my php please ? Here is the output of commands asked by David in another post: aptitude search php5 p libapache-mod-php5 - server-side, HTML-embedded scripting langu i A libapache2-mod-php5 - server-side, HTML-embedded scripting langu i php5 - server-side, HTML-embedded scripting langu p php5-apache2-mod-bt - PHP bindings for mod_bt p php5-auth-pam - A PHP5 extension for PAM authentication i php5-cgi - server-side, HTML-embedded scripting langu p php5-clamavlib - PHP ClamAV Lib - ClamAV Interface for PHP5 p php5-cli - command-line interpreter for the php5 scri i A php5-common - Common files for packages built from the p i php5-curl - CURL module for php5 p php5-dev - Files for PHP5 module development i A php5-gd - GD module for php5 p php5-idn - PHP api for the IDNA library p php5-imagick - ImageMagick module for php5 p php5-imap - IMAP module for php5 p php5-interbase - interbase/firebird module for php5 p php5-json - JSON serialiser for PHP5 p php5-ldap - LDAP module for php5 p php5-mapscript - module for php5-cgi to use mapserver p php5-maxdb - PHP extension to access MaxDB databases fo i A php5-mcrypt - MCrypt module for php5 p php5-memcache - memcache extension module for PHP5 p php5-mhash - MHASH module for php5 p php5-ming - Ming module for php5 i A php5-mysql - MySQL module for php5 p php5-odbc - ODBC module for php5 p php5-pgsql - PostgreSQL module for php5 p php5-ps - ps module for PHP 5 p php5-pspell - pspell module for php5 p php5-radius - PECL radius module for PHP 5 p php5-recode - recode module for php5 p php5-snmp - SNMP module for php5 p php5-sqlite - SQLite module for php5 p php5-sqlite3 - SQLite3 module for php5 p php5-sqlrelay - SQL Relay PHP API p php5-suhosin - advanced protection module for php5 p php5-sybase - Sybase / MS SQL Server module for php5 p php5-tidy - tidy module for php5 p php5-uuid - OSSP uuid module for php5 p php5-xapian - Xapian search engine interface for PHP5 p php5-xcache - Fast, stable PHP opcode cacher p php5-xmlrpc - XML-RPC module for php5 p php5-xsl - XSL module for php5 aptitude show php5 | grep Version Version : 5.2.0-8+etch13 aptitude show php5-cgi | grep Version Version : 5.2.0-8+etch13 php5 --version -bash: php5: command not found php-cgi --version PHP 5.2.0-8+etch13 (cgi-fcgi) (built: Oct 2 2008 08:21:17) Copyright (c) 1997-2006 The PHP Group Zend Engine v2.2.0, Copyright (c) 1998-2006 Zend Technologies

  Read the article

• Migrate from MySQL to PostgreSQL on Linux (Kubuntu)

  - by Dave Jarvis

  Storyline Trying to migrate a database from MySQL to PostgreSQL. All the documentation I have read covers, in great detail, how to migrate the structure. I have found very little documentation on migrating the data. The schema has 13 tables (which have been migrated successfully) and 9 GB of data. MySQL version: 5.1.x PostgreSQL version: 8.4.x I want to use the R programming language to analyze the data using SQL select statements; PostgreSQL has PL/R, but MySQL has nothing (as far as I can tell). A long time ago in a galaxy far, far away... Create the database location (/var has insufficient space; also dislike having the PostgreSQL version number everywhere -- upgrading would break scripts!): sudo mkdir -p /home/postgres/main sudo cp -Rp /var/lib/postgresql/8.4/main /home/postgres sudo chown -R postgres.postgres /home/postgres sudo chmod -R 700 /home/postgres sudo usermod -d /home/postgres/ postgres All good to here. Next, restart the server and configure the database using these installation instructions: sudo apt-get install postgresql pgadmin3 sudo /etc/init.d/postgresql-8.4 stop sudo vi /etc/postgresql/8.4/main/postgresql.conf Change data_directory to /home/postgres/main sudo /etc/init.d/postgresql-8.4 start sudo -u postgres psql postgres \password postgres sudo -u postgres createdb climate pgadmin3 Use pgadmin3 to configure the database and create a schema. A New Hope The episode began in a remote shell known as bash, with both databases running, and the installation of a command with a most unusual logo: SQL Fairy. perl Makefile.PL sudo make install sudo apt-get install perl-doc (strangely, it is not called perldoc) perldoc SQL::Translator::Manual Extract a PostgreSQL-friendly DDL and all the MySQL data: sqlt -f DBI --dsn dbi:mysql:climate --db-user user --db-password password -t PostgreSQL > climate-pg-ddl.sql mysqldump --skip-add-locks --complete-insert --no-create-db --no-create-info --quick --result-file="climate-my.sql" --databases climate --skip-comments -u root -p The Database Strikes Back Recreate the structure in PostgreSQL as follows: pgadmin3 (switch to it) Click the Execute arbitrary SQL queries icon Open climate-pg-ddl.sql Search for TABLE " replace with TABLE climate." (insert the schema name climate) Search for on " replace with on climate." (insert the schema name climate) Press F5 to execute This results in: Query returned successfully with no result in 122 ms. Replies of the Jedi At this point I am stumped. Where do I go from here (what are the steps) to convert climate-my.sql to climate-pg.sql so that they can be executed against PostgreSQL? How to I make sure the indexes are copied over correctly (to maintain referential integrity; I don't have constraints at the moment to ease the transition)? How do I ensure that adding new rows in PostgreSQL will start enumerating from the index of the last row inserted (and not conflict with an existing primary key from the sequence)? Resources A fair bit of information was needed to get this far: https://help.ubuntu.com/community/PostgreSQL http://articles.sitepoint.com/article/site-mysql-postgresql-1 http://wiki.postgresql.org/wiki/Converting_from_other_Databases_to_PostgreSQL#MySQL http://pgfoundry.org/frs/shownotes.php?release_id=810 http://sqlfairy.sourceforge.net/ Thank you!

  Read the article

• XRDP: window manager not starting

  - by niboshi

  I have setup my Ubuntu server so that I can connect and login to XRDP from Windows remote desktop. My problem is that after logging in, no window-manager is started. It only displays a single gnome-terminal with no border and gray meshed background. It seems that /usr/sbin/xrdp-sesman itself is running (from observation of ps and /var/run/xrdp/xrdp-sesman.pid). I put debugging line like touch /home/myname/aaaaa into ~/startwm.sh or /etc/xrdp/startwm.sh, but the file aaaaa did not generated after logging in, so these scripts have not been executed. (Both of them have chmod +x permission.) Am I missing some configuration file, or is there any way of further inspection? Any help is appreciated. Thanks. Contents of /etc/xrdp/sesman.ini [Globals] ListenAddress=127.0.0.1 ListenPort=3350 EnableUserWindowManager=0 # or 1 UserWindowManager=startwm.sh DefaultWindowManager=startwm.sh # or commented-out [Security] AllowRootLogin=1 MaxLoginRetry=4 TerminalServerUsers=tsusers TerminalServerAdmins=tsadmins [Sessions] MaxSessions=10 KillDisconnected=0 IdleTimeLimit=0 DisconnectedTimeLimit=0 [Logging] LogFile=/var/log/xrdp-sesman.log LogLevel=DEBUG EnableSyslog=0 SyslogLevel=DEBUG [X11rdp] param1=-bs param2=-ac param3=-nolisten param4=tcp [Xvnc] param1=-bs param2=-ac param3=-nolisten param4=tcp Contents of /var/log/xrdp-sesman.log after logging in: [20120402-21:29:34] [CORE ] starting sesman with pid 11064 [20120402-21:29:34] [INFO ] listening... [20120402-21:29:39] [INFO ] scp thread on sck 7 started successfully [20120402-21:29:39] [INFO ] granted TS access to user myname [20120402-21:29:39] [INFO ] starting Xvnc session... [20120402-21:29:40] [INFO ] starting xrdp-sessvc - xpid=11074 - wmpid=11073 [20120402-21:29:49] [INFO ] session 11072 - user myname- terminated Process tree Below is a part of ps aufx output during xrdp session: xrdp 12344 0.0 0.4 22856 8732 ? Sl Apr02 0:01 /usr/sbin/xrdp root 12346 0.0 0.0 15672 2000 ? S Apr02 0:00 /usr/sbin/xrdp-sesman root 24346 0.0 0.0 3780 872 ? S 00:00 0:00 \_ /usr/sbin/xrdp-sessvc 24348 24347 myname 24347 0.4 0.6 76468 13700 ? Sl 00:00 0:14 \_ gnome-terminal myname 24362 0.0 0.0 2220 716 ? S 00:00 0:00 | \_ gnome-pty-helper myname 24363 0.0 0.2 6912 5268 pts/13 Ss 00:00 0:00 | \_ bash myname 27902 0.0 0.0 2824 1096 pts/13 R+ 00:53 0:00 | \_ ps aufx myname 24348 0.0 0.9 24984 19216 ? S 00:00 0:01 \_ Xvnc :18 -geometry 1920x1080 -depth 24 -rfbauth /home/myname/.vnc/sesman_myname_passwd -bs -ac -nolisten tcp root 24349 0.0 0.0 16596 1304 ? Sl 00:00 0:00 \_ xrdp-chansrv Environment Ubuntu 11.10 Oneiric xrdp version: 0.5.0~20100303cvs-6ubuntu2

  Read the article

• PHP-FPM High Memory Usage

  - by Ruel

  I have a wordpress blog, that uses WP-SuperCache, and normally I get 100 visitors per day. With nginx + php-fpm it's blazing fast, and I have no regrets. One thing i noticed, php-fpm takes a lot of memory: top - 09:20:43 up 5 days, 15:53, 1 user, load average: 0.00, 0.00, 0.00 Tasks: 26 total, 1 running, 25 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 1048576k total, 329956k used, 718620k free, 0k buffers Swap: 0k total, 0k used, 0k free, 0k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 10226 www-data 15 0 145m 52m 4584 S 0.0 5.1 0:07.55 php-fpm 10223 www-data 16 0 141m 48m 4692 S 0.0 4.8 0:08.70 php-fpm 20277 www-data 15 0 138m 46m 4368 S 0.0 4.5 0:07.55 php-fpm 20259 www-data 15 0 133m 41m 4600 S 0.0 4.0 0:06.68 php-fpm 12201 www-data 15 0 133m 41m 4632 S 0.0 4.0 0:08.31 php-fpm 11586 www-data 15 0 132m 40m 4292 S 0.0 3.9 0:03.27 php-fpm 29822 www-data 15 0 128m 36m 4356 S 0.0 3.6 0:05.26 php-fpm 28427 mysql 15 0 200m 7300 4764 S 0.0 0.7 0:47.89 mysqld 10202 root 18 0 98.3m 4320 1204 S 0.0 0.4 0:03.80 php-fpm 22524 root 18 0 86064 3396 2652 S 0.0 0.3 0:16.74 sshd 9882 www-data 18 0 42052 2572 804 S 0.0 0.2 0:27.52 nginx 9884 www-data 18 0 42052 2560 804 S 0.0 0.2 0:26.26 nginx 9881 www-data 18 0 42064 2524 804 S 0.0 0.2 0:29.24 nginx 9879 www-data 18 0 42032 2480 804 S 0.0 0.2 0:29.58 nginx 23771 root 15 0 12176 1820 1316 S 0.0 0.2 0:00.08 bash 28344 root 22 0 11932 1416 1184 S 0.0 0.1 0:00.00 mysqld_safe 18167 root 16 0 62628 1208 648 S 0.0 0.1 0:00.55 sshd 25941 root 15 0 12612 1192 928 R 0.0 0.1 0:02.21 top 11573 root 15 0 20876 1168 592 S 0.0 0.1 0:00.67 crond 9878 root 18 0 41000 1112 284 S 0.0 0.1 0:00.00 nginx 21736 root 23 0 21648 936 716 S 0.0 0.1 0:00.00 xinetd 11585 root 18 0 46748 816 428 S 0.0 0.1 0:00.00 saslauthd 14125 root 12 -4 12768 768 452 S 0.0 0.1 0:00.00 udevd 1 root 18 0 10352 728 616 S 0.0 0.1 0:17.93 init 24564 root 15 0 5912 680 544 S 0.0 0.1 0:01.90 syslogd 11618 root 18 0 46748 548 160 S 0.0 0.1 0:00.00 saslauthd Here's my php-fpm config: [global] pid = run/php-fpm.pid error_log = log/php-fpm.log log_level = notice [www] listen = 127.0.0.1:9000 user = www-data group = www-data pm = dynamic pm.max_children = 50 pm.start_servers = 3 pm.min_spare_servers = 3 pm.max_spare_servers = 10 pm.max_requests = 500 Sometimes it goes up to 400MB. And I'm planning to add a new website on my VPS. Is this normal?

  Read the article

< Previous Page | 140 141 142 143 144 145 146 147 148 149 150  | Next Page >