Search Results

Search found 5140 results on 206 pages for 'crazy bash'.

Page 144/206 | < Previous Page | 140 141 142 143 144 145 146 147 148 149 150 151  | Next Page >

  • Email is not sending when the script is running by CRON

    - by Adam Blok
    I wrote the simple backup bash script and at the end of it, it's sending an email to me that backup is ready. Everything works perfect when I run this script from terminal (root), but when the script is running by CRON, email is not sending :-/. #!/bin/sh filename=$(date +%d-%m-%Y) backup_dir="/mnt/backup/" email_from_name="BACKUP" email_to="my@email" email_subject="Backup is ready" email_body_file="/tmp/backup-email-body.txt" tar czf "$backup_dir$filename.tgz" "/home/www" echo "Subject: $email_subject" > $email_body_file ls $backup_dir -sh >> $email_body_file sendmail -F $email_from_name -t $email_to < $email_body_file

    Read the article

  • Restoring files from blueprint on command

    - by Nick
    I am setting up a server. I already have rented a machine running centOS 6 but I have run into a bit of a technical problem with configuring the server software: The server will have some files that it will try to read/write to them but what I need is a way to have a blueprint of these files and everytime the server restarts the files that it used get deleted and replaced by the blueprints. I have heared of a RAM disks or Virtual File Systems but didnt quite understand how they work or how to set them up. The server software is written in java which means bash commands can be run from it. I cannot modify what happens when the server shuts down entirely what I can do is run a command before the server runs the final shutdown save

    Read the article

  • crontab doesn't work on centos 6

    - by sbxmal
    /etc/crontab: SHELL=/bin/bash PATH=/sbin:/bin:/usr/sbin:/usr/bin MAILTO=root HOME=/ 01 * * * * root run-parts /etc/cron.hourly 02 4 * * * root run-parts /etc/cron.daily 22 4 * * 0 root run-parts /etc/cron.weekly 42 4 1 * * root run-parts /etc/cron.monthly */2 * * * * /usr/bin/php -q /home/dorsen/public_html/cron-test.php */2 * * * * http://www.mysiteurl.com/cron-test.php - also doesn't work If i run this file directly in browser - all fine What i did : root@vded10625 [~]# yum remove cronie-anacron .... Complete! root@vded10625 [~]# yum install cronie-noanacron sysstat .... Complete! root@vded10625 [~]# service crond start Starting crond: [ OK ] root@vded10625 [~]# chkconfig crond on root@vded10625 [~]# service crond restart Stopping crond: [ OK ] Starting crond: [ OK ] Will be pleased for any help

    Read the article

  • Is there some way Linux editors can tell the programming language without the file extension?

    - by vfclists
    I am editing some scripts on Linux without the languages file extensions, and it seems that the editors, namely vi, nano and gedit are not applying syntax highlighting because the filenames don't use the language extensions. Is there some parameters to be passed or some setting that can enable them to recognize the language? Update: After some googling I realize that bash has that ability, at least to do some parsing or check the shebang at the top determine the language. By default Ubuntu does not install the complete vim package, so after installing it, the shell files are recognized. I don't know about nano or gedit, but vi and its graphical counterpart will do.

    Read the article

  • How do I run Munin plugins written in Ruby, using RVM?

    - by hlg
    Hi! I try to run some Munin plugins written in Ruby. I would like to use RVM, so Munin needs to know where to find Ruby. I tried to change the line calling munin-cron in the cron file as follows: */5 * * * * munin bash -c 'source /usr/local/lib/rvm && rvm 1.9.2@munin && /usr/bin/munin-cron' This leads to error messages in munin-node.log, saying /usr/bin/env: ruby: No such file or directory When I change the plugins' shebangs to the actual path of the Ruby executable it works, but the RVM environment should be set so that '/usr/bin/env ruby' works. It does when I execute the plugins as root. Any ideas?

    Read the article

  • Why is process not being displayed by TOP

    - by drN
    I am running a Mathematica script (this question probably doesn't fit in Mathematica.SE however) and I know that it generally takes up a lot of RAM and loads up my cores. However, althought pgrep MathKernel is showing a pid, I find that top doesn't show this in the top processes, although I notice that it is taking up about 2.25GB of the 8GB available to me. pmap -x my_process_id total kB 2243132 1907404 1892108 AND ps aux | grep MathKernel dnaneet 20837 12.6 23.3 2234944 1907404 pts/1 Sl 09:23 8:01 /share/apps/mathematica/8.0.4/SystemFiles/Kernel/Binaries/Linux-x86-64/MathKernel -runfirst $TopDirectory="/share/apps/mathematica/8.0.4" -script ./dcm_10micrometer_2x -- ./dcm_10micrometer_2x ps aux shows that the process is taking about 12% (In asterisks) dnaneet 20601 0.0 0.0 68264 1660 pts/1 Ss 09:15 0:00 -bash **dnaneet 20837 12.2 23.3 2234944 1907404 pts/1 Sl 09:23 8:01 /share/apps/mat** dnaneet 21922 0.0 0.0 65604 948 pts/1 R+ 10:29 0:00 ps -aux Did this process fail and is the MathKernel just lingering?

    Read the article

  • Can spell checking be disabled by default on OS X?

    - by Lri
    Is there some way I could disable continuous spell checking or other settings in the substitutions menu by default? System Preferences only has an option to disable autocorrect. defaults write -g CheckSpellingWhileTyping -bool false would be overridden by keys on the property lists of applications. This would only apply to applications that have been used before: #!/bin/bash for d in $(defaults domains | tr -d ,); do osascript -e "app id \"$d\"" > /dev/null 2>&1 [ $? == 1 ] && continue echo $d defaults write $d CheckSpellingWhileTyping -bool false defaults write $d SmartDashes -bool false defaults write $d SmartLinks -bool false defaults write $d SmartQuotes -bool false defaults write $d SmartCopyPaste -bool false defaults write $d TextReplacement -bool false done

    Read the article

  • SSH: one user logs in, other don't

    - by Co Lega
    Some users can ssh correctly, others don't. I have an admin user, which is in wheel. I used vsftpd for allowing FTP. I created a nologin user for FTP. Call this user "ftpuser". Now I want to allow sftp. It allows me to connect using admin user. I remove the nologin, by giving the user a shell via usermod -s /bin/bash ftpuser. It still doesn't allow me to connect from the ftpuser via sftp. The content of /home/ftpuser/.ssh is just the known_hosts file which contains "localhost" entry only. User permissions are (in theory) ok: ls -la /home working (admin) : drwx------ 18 admin admin 4096 Feb 6 15:33 admin non-working(ftpuser): drwx------ 3 ftpuser ftp 4096 Mar 26 15:25 ftpuser I haven't configured anything special on openssh. Does the ftpuser need anything extra than shell to enter via ssh?

    Read the article

  • using git on DOS command line asks for password - but not when using TortoiseGit or gitBash

    - by Sandy
    I would like to use the DOS command line to enter the command: git clone "git_path.git" myDir It asks me to enter a password which I would like to avoid. I usually use TortoiseGit to do all git related operations. I would like to setup cruisecontrol using ant with a custom git task. Therefore I need to perform git clone on the command line in Windows 7. But it only works using git bash and not DOS. According to other forum entries, I tried to convert the key with puttyGen and put the file id_rsa in c:/Users/myName/.ssh I also added an authorized_keys file but it still asks for a password. Any ideas? Thanks

    Read the article

  • Weird behaviour/rendering of backspace in Terminal.app when SSHing into zsh using tmux/screen

    - by Nils Riedemann
    Hi there, I just stumbled upon a weird problem. When I SSH into my server (centos, zsh) and I type some stuff and hit backspace It looks like a space - but internally it really deleted the characters. ls -l a Note that the space between land a is actually when I hit backspace. When I now hit return ls -a gets executed. This is only in zsh, in bash it works fine. Hope anyone has an idea what this is all about and how to fix this. Update: Only happens when using tmux/screen

    Read the article

  • s3cmd run on command line not on cron

    - by Jonar
    Many have said that the problem is with environment but I still can't seem to solve this problem. BTW I am using Ubuntu 9.10 login as user, then sudo -s using this command: s3cmd put file s3://bucket worked! now here is the simple script intended for testing: #! /bin/bash env >/tmp/cronjob.log s3cmd put file s3://bucket issuing the command crontab -e * * * * * /opt/script 2>&1 | logger Then using tail to syslogs Dec 3 23:22:01 ubuntu CRON[10795]: (root) CMD (/opt/script 2&1 | logger) But by verifying it on s3Fox Organizer, the file is not uploaded. (I tried changing the #! /bin/sh (no effect), putting crons on /etc/crontab (no effect), setting HOME=/home/user (no effect) What are other options to try? Or other ways to debug this problem. Thanks

    Read the article

  • Advanced command line editing for Windows?

    - by Ben Collins
    I'm developer who was "born and bred" on Linux and BSD systems, and I've become accustomed to having advanced tools for the console (posix shells like bash, for example). My career has taken a twist that means I'm working in a Windows environment most of the time, and the console capabilities are really poor by comparison. The traditional windows console environment is a complete joke, and even most of the third party attempts at improving things aren't a lot better. PowerShell is a huge step in the right direction, but the console applications themselves are still way behind where unix has been for 20 years. Does anyone know of a PowerShell console application that supports advanced command line editing like posix shells do? I'm particularly interested in emacs-mode editing, and I'd also like to be able to resize my window to an arbirary size, unlike the native console app that comes with Windows.

    Read the article

  • btrfs won't run from cron

    - by Mikkel
    I'm trying to set up a cron job to create a btrfs subvolume snapshot of my root partition. The command works perfectly if I run it from the command line, but nothing happens at the scheduled cron time. I've tried piping to logger and redirecting stdout/stderr to file, and not only is there no content, the file I'm logging to isn't even created. The cron command I have is as follows: 0 0 * * * /sbin/btrfs subvolume snapshot / "/snapshots/$(date +%Y-%m-%d)" I've tried prefixing it with /bin/bash, but that makes no difference. What am I missing?

    Read the article

  • How do i allow users to execute commands via ssh without allocating a psuedo-terminal

    - by Dani El
    I need to allow users to run a limited set of commands. But not to allow them to create interactive sessions. Just like GitHub does. If you try to ssh without a command it greetings you and close the session. I can acquire this by using ForceCommand some-script But getting in some-script i then need to eval user's input. Perhaps any other NoTTY-like option in sshd_config? --- UPDATE --- i'm looking for a pure SSH / Bash solution, not Perl/Python/etc. hacks.

    Read the article

  • Booting ubuntu from usb hdd: GRUB menu not shown

    - by emanemos
    Hello, could anyone help me to boot ubuntu-9.04 from usb hard disk? This disk contains /boot primary partition. During ubuntu installation I used "Advanced" button and asked to install GRUB to the /boot partition. Later I checked whether GRUB files are really present in this partition. They are. However, I get stuck while trying to boot. The boot menu ("ubuntu generic version", "ubuntu recovery mode", etc...) is not shown. Instead I am thrown to GRUB minimal bash-like version. I feel at a loss and have no idea why I am pointed to this minimal version. Can anybody prompt me what to do?

    Read the article

  • CentOS-Like configuration of Vim on Ubuntu

    - by matejkramny
    Whenever I use a CentOS System, there's always a pleasant configuration of vim which mainly does the following: Remembering position of closed files Colour mode (!!!) Bash has colours There's lots more, just not something i can recall on the spot. Then, i go to ubuntu and its all black and white, no nice vim config etc. I have to use Ubuntu, and I hate ubuntu because of this. I know I can all configure it by myself, so my question is: How can I configure the Ubuntu system to behave (aesthetically) like CentOS? PS to future self: I will be stoned to death for asking such a question.

    Read the article

  • What is the best way to make Calculate SHA1 as a context menu option in Mac OS X?

    - by Andrei
    In order to calculate the SHA1 checksum of a downloaded file, I could type /usr/bin/openssl sha1 in Terminal and then drag there the file which I want check. To make it simpler, one could enable a Context Menu item for this action. What is the best way to create such item in Mac OS X 10.6? A detailed answer is appreciated, because I don't have good experience with AppleScript, etc. Step by step Open Automator Create new service Choose to receive selected Files and Folders in Finder Add action Run Shell Script where your bash command is /usr/bin/openssl sha1 "$@" and you pass input as arguments How can I get the output? Preferably in a Growl pop-up or a message window/dialog.

    Read the article

  • When I auto-start Supervisord on boot, the [program:start_gunicorn] don't start

    - by Charlesliam
    The [program:start_gunicorn] is running with no error when I manually start supervisord with this setup. [program:start_gunicorn] command=/env/nafd/bin/gunicorn_start priority=1 autostart=true autorestart=unexpected user=nafd_it redirect_stderr=true stdout_logfile=/env/nafd/logs/gunicorn_supervisor.log stderr_logfile=/env/nafd/logs/gunicorn_supervisor_err.log I successfully run this init script for my supervisord. But when I used auto-start init script for supervisord the gunicorn is not running. ]# service gunicorn status gunicorn: unrecognized service What do I need to do to make the [program:start_gunicorn] run when using auto-start supervisord on boot? Here's my gunicorn config. /env/nafd/bin/gunicorn_start #!/bin/bash NAME="nafd_proj" DJANGODIR=/env/nafd/nafd_proj SOCKFILE=/env/nafd/run/gunicorn.sock NUM_WORKERS=1 DJANGO_SETTINGS_MODULE=nafd_proj.settings DJANGO_WSGI_MODULE=nafd_proj.wsgi echo "Starting $NAME as 'NAFD Web Server'" source /env/nafd/bin/activate export DJANGO_SETTINGS_MODULE=$DJANGO_SETTINGS_MODULE export PYTHONPATH=$DJANGODIR:$PYTHONPATH RUNDIR=$(dirname $SOCKFILE) test -d $RUNDIR || mkdir -p $RUNDIR cd /env/nafd/nafd_proj exec ../bin/gunicorn ${DJANGO_WSGI_MODULE}:application --bind=127.0.0.1:8001 \ --name $NAME \ --workers $NUM_WORKERS \ --log-level=debug \` Any idea is really appreciated.

    Read the article

  • Log with iptalbes which user is delivering email to port 25

    - by Maus
    Because we got blacklisted on CBL I set up the following firewall rules with iptables: #!/bin/bash iptables -A OUTPUT -d 127.0.0.1 -p tcp -m tcp --dport 25 -j ACCEPT iptables -A OUTPUT -p tcp -m tcp --dport 25 -m owner --gid-owner mail -j ACCEPT iptables -A OUTPUT -p tcp -m tcp --dport 25 -m owner --uid-owner root -j ACCEPT iptables -A OUTPUT -p tcp -m tcp --dport 25 -m owner --uid-owner Debian-exim -j ACCEPT iptables -A OUTPUT -p tcp -m limit --limit 15/minute -m tcp --dport 25 -j LOG --log-prefix "LOCAL_DROPPED_SPAM" iptables -A OUTPUT -p tcp -m tcp --dport 25 -j REJECT --reject-with icmp-port-unreachable I'm not able to connect to port 25 from localhost with another user than root or a mail group member - So it seems to work. Still some questions remain: How effective do you rate this rule-set to prevent spam coming from bad PHP-Scripts hosted on the server? Is there a way to block port 25 and 587 within the same statement? Is the usage of /usr/sbin/sendmail also limited or blocked by this rule-set? Is there a way to log the username of all other attempts which try to deliver stuff to port 25?

    Read the article

  • LSB Script: how do i know if something goes wrong?

    - by ianaz
    How do I know if a LSB script fails to load or where do I check the log of the lsbs scripts? I added two scripts with the following command: update-rc.d scriptname defaults And just one launches the things I need. It does not seem to be a script error since if I launch it with /etc/init.d/scriptname it works. This is my script: #!/bin/bash ### BEGIN INIT INFO # Provides: nodes # Required-Start: $remote_fs $syslog # Required-Stop: $remote_fs $syslog # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: Starts all node apps # Description: Starts all node apps like AAM, AMT,... ### END INIT INFO echo "Launch Node applications with forever" export PATH=/usr/local/bin:$PATH # Starts the redis server redis-server # Starts AAM forever -o /var/log/AAM.log -e /var/log/AAM.log --spinSleepTime 2000 -m 5 start /var/nodejs/AAM/app.js

    Read the article

  • Firewall still blocking port 53 despite listing otherwise?

    - by Tom
    I have 3 nodes with virtually the same iptables rules loaded from a bash script, but one particular node is blocking traffic on port 53 despite listing it's accepting it: $ iptables --list -v Chain INPUT (policy DROP 8886 packets, 657K bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT all -- lo any anywhere anywhere 2 122 ACCEPT icmp -- any any anywhere anywhere icmp echo-request 20738 5600K ACCEPT all -- any any anywhere anywhere state RELATED,ESTABLISHED 0 0 ACCEPT tcp -- eth1 any anywhere node1.com multiport dports http,smtp 0 0 ACCEPT udp -- eth1 any anywhere ns.node1.com udp dpt:domain 0 0 ACCEPT tcp -- eth1 any anywhere ns.node1.com tcp dpt:domain 0 0 ACCEPT all -- eth0 any node2.backend anywhere 21 1260 ACCEPT all -- eth0 any node3.backend anywhere 0 0 ACCEPT all -- eth0 any node4.backend anywhere Chain FORWARD (policy DROP 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 15804 packets, 26M bytes) pkts bytes target prot opt in out source destination nmap -sV -p 53 ns.node1.com // From remote server Starting Nmap 4.11 ( http://www.insecure.org/nmap/ ) at 2011-02-24 11:44 EST Interesting ports on ns.node1.com (1.2.3.4): PORT STATE SERVICE VERSION 53/tcp filtered domain Nmap finished: 1 IP address (1 host up) scanned in 0.336 seconds Any ideas? Thanks

    Read the article

  • Mongo Scripting the shell

    - by cKendrick
    On my production stack, I have a front-end server and a Mongo server. I would like to be able to set a cron job on the front-end server to create some logs daily. I wrote a script that does this: ./mongo server:27017/dbname --quiet my_commands.js If I run it from the Mongo server as above, it works fine. However, I would like to be able to run it from the front-end server. When I try to do that, I get: -bash: mongo: command not found Since mongo is not installed on the front end server, it gives me that error. Is it possible to somehow bind mongo to my mongo on the Mongo server?

    Read the article

  • How can I programmatically renumber pages in a PDF?

    - by Andrew
    As a graduate student, I come across PDFs of articles and book chapters on a daily basis. Sometimes these PDFs are paginated correctly internally (that is, if an article starts on page 67, the PDF starts on page 67 as well; not on page 1). When they aren't, I have to open the file in Acrobat and renumber the pages in the "Page Thumbnails" panel. I would love to be able to automate this whole process with a script (bash, Python, AppleScript, whatever) that lets me pass the first actual page number... something like fixpagination example.pdf 67. However, I cannot find any terminal-based program that can re-paginate PDFs. Neither pdftk nor PyPDF seem to be able to deal with pagination. Are there any scriptable programs that can internally re-paginate PDF files?

    Read the article

  • Apache Web Server character encoding

    - by OBY
    I've recently transferred my webapp from my localhost (LH) to a VPS, and have had hebrew chars-encoding probs since. Whenever I send a request with a heb-char it results in "?????" saved to the DB. My LH config was tomcat6, MySQL, and centOS 6.2, opened to the web. In the VPS env I'm behind an Apache Web Server, and the rest is quite the same (though I haven't done anything to its installation). Please note I already have had this problem before, on my LH when the request was sent from IE/chrome (not FF!). The solution was to apply a filter on the the context and change the char-type to UTF-8. My webapp content char-encode is utf-8, MySql server set to utf8 using charset utf8;, and my centOS set to iw_IL.UTF8 using export LANG=iw_IL.UTF8. When I use locale the bash output seems to be set correctly. Any suggestions?

    Read the article

  • Linux program unable to access files in group

    - by user1064665
    I'm having trouble configuring things on linux so that a program can access certain files. Let's call it pgm A. It has uid uA and gid gA. In addition, uid uA is listed in /etc/group as a member of group gX. The problem is that pgm A cannot access files for which the uid is root and the gid is gX, but only when pgm A is called from another program, pgm B, which also runs as user uA. If I su as user uA and run pgm A from bash, it has no problem accessing files in group gX. But if another program, pgm B, which also runs as user uA, forks and execs pgm A, pgm A cannot access the files. I've verified that pgm A is indeed running as user uA, group gA, when launched from pgm B. So, if uA is a member of group gX, why can't the program access files which are readable by group gX? It's as if the operating system is ignoring the fact that user uA is also in group gX.

    Read the article

< Previous Page | 140 141 142 143 144 145 146 147 148 149 150 151  | Next Page >