Search Results

Search found 6563 results on 263 pages for 'graphics tablet'.

Page 144/263 | < Previous Page | 140 141 142 143 144 145 146 147 148 149 150 151  | Next Page >

  • Why do manufacturers not show all hardware power usage?

    - by Drew
    I find it slightly more difficult to build a computer when I do not know how much power is needed for a component. When selecting a power supply for a computer, it is difficult to know how large of one to get. You don't want to go too large for cost reasons and circuit reasons, but you don't want to go too low and not be able to properly use every component. For instance, a graphics card might say "Minimum of a 500 Watt power supply. (Minimum recommended power supply with +12 Volt current rating of 30 Amps.)" But it really needs 360W (12V * 30A). So why don't they just say "Uses 360W max and xxxW peak"? Processors, I have noticed are good at reporting their power usage, but aside from processors and sometimes graphics cards, power usage is easily found. What is the power consumed by the Blu-ray / DVD drives? By the HDDs/SSDs? By the Mobo? etc. Why are these questions not easily answered when building a machine?

    Read the article

  • Dual-monitor Windows XP, monitors are "identified wrong"

    - by Susan
    Trying to use a dual-monitor desktop system with Windows XP.... 1 graphics card... with digital/analog outputs. Picking: Desktop - Properties - Settings - Identify It shows "2" as my left monitor... and "1" as my right. How do I switch them around? Here's what I've tried so far: Switch the cables (I can't. I need the digital cable on the better monitor.) Switch the monitors (I can't. One has a few dead pixels.) Drag the 1+2 graphics around (That doesn't change the IDENTIFY numbers.) Pick "use as primary" or "extend" (That doesn't change the IDENTIFY numbers.) Anything else I can try? What exactly controls/switches the "IDENTIFY numbers" around? I know it can be done. For weeks I ran this exact set-up... with the CORRECT numbers appearing on the monitors.... then just recently... after a few reboots... they now appear "switched around".

    Read the article

  • Disable or remove filter driver for single HID device

    - by snoopen
    Running Windows XP in a corporate setting here. I have an issue where a filter driver is interfering with the functionality of different USB HIDs. For example graphics tablets do not respond while the filter driver is in place. I've also had the issue with foot pedals used with transcription software. My question is really two fold: A) what makes Windows use a filter driver on one HID but not another? B) when a filter driver is causing conflicts how can I disable it on the affected devices? Background I've previously narrowed down the issue to the filter driver by uninstalling the software (Funk Proxy Host) responsible for the filter driver. The software is a type of RDP we use here at work. (I might have even booted into safe mode and renamed the file, I forget). I believe the filter driver is present to disable or modify the use of the local keyboard and mouse while admin staff are assisting users. Either way I don't have the authority to just go uninstalling this software. As far as I can tell the software versions are the same, however I'm not sure if the device driver definitions are all the same as I don't know where these things would be located. To check for the presence of the filter driver I locate the hardware device in Device Manager, click Properties Driver tab Driver Details.... It shows up as ph32ihid.sys. Even though all machines are meant to have the same SOE and do have Funk Proxy Host installed I don't always have issues with the same HIDs. A few machines here the foot pedals without any issues. I've not had any machines work with the graphics tablet without uninstalling Funk software. Driver details I've just read up a bit more about filter drivers and found the drivers description in the registry under "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ProxyHostHIDFilter" There it's called "Kernel-mode HID filter driver for the Proxy Host". Presumably I could also disable it here but that would be system wide which is probably not desirable?

    Read the article

  • Linux boot - stop the kernel switching to a new framebuffer mode clearing output

    - by Avio
    I'm working on an embedded system (based onUbuntu 12.04 LTS) and I'm customizing its kernel. I'm having some problem with upstart, mountall and plymouth. Nothing unsolvable I suppose, but the real problem is that I can't diagnose properly what's going on because the kernel (or maybe plymouth) changes the video mode in the middle of the boot process. This completely wipes entire lines of log and prevents any debugging of kernel misconfigurations. My Grub2 config seems to be ok with: GRUB_CMDLINE_LINUX="" GRUB_CMDLINE_LINUX_DEFAULT="acpi=force noplymouth" GRUB_GFXMODE=1024x768x32 GRUB_GFXPAYLOAD_LINUX=keep Here is some relevant output of lspci: 00:00.0 Host bridge: Intel Corporation Mobile 945GSE Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GSE Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) And here is the relevant portion of my kernel configuration: CONFIG_AGP=y CONFIG_AGP_INTEL=y CONFIG_VGA_ARB=y CONFIG_VGA_ARB_MAX_GPUS=16 CONFIG_DRM=y CONFIG_DRM_KMS_HELPER=y CONFIG_DRM_I915=y CONFIG_DRM_I915_KMS=y CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_FB=y CONFIG_FB_BOOT_VESA_SUPPORT=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_VESA=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=640 CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y Every other custom/stock kernel boot fine with that Grub2 config. What I would like to have is a single flow of messages on a single console (retaining one screen resolution) from the bootup logo till the login prompt. Does anybody know what I have to tweak to achieve this?

    Read the article

  • MacBook Pro (2007 - ATI-Card) Screen goes half black then shuts down the entire computer

    - by BluePerry
    Hey, when I'm starting my MBP I get about 10-60 seconds of the booting process before the screen goes half black (Its like applying a black to transparent gradient from the left side of the screen to the middle of the screen). After a 5 seconds the entire screen blacks out and the MBP shuts down. There have been issues with heat and some minor artifacts on the screen in the past but nothing serious as far as I know. Everything could be resolved by rebooting or letting the MBP cool down a bit. I would like to identify the problem now. There are 3 possibilities I can think of right now: My graphics card is defect and shuts down after a few seconds. (But if thats true, I find it kind of hard to explain the HALF black screen) My LCD-Panel is defect and sends back wrong signals so the system shuts down??? (I not sure about that) My fan or/and thermal sensors are defect and forcing the graphics card to shut down. Can anyone point if I'm right or if there yet another reason for this. I'd be thankful for any hint or tips. Cheers, Per

    Read the article

  • Computer keeps restarting [closed]

    - by Joris
    I have a strange problem with my desktop pc, when I start it, it just restarts immediately, it displays the bios/motherboard logo and then restarts. I can't access the bios to edit settings because it restarts to fast. Then I tried different things to fix it with mixed success. (I also tried to reset the bios without success) I noticed that a capacity from the graphics card was broken (it looked exploded) so I ordered a new graphics card & plugged it in the computer. It didn't change much, still the same problem. Then I unplugged everything that's not necessary and put only 1Gig RAM in the motherboard (usually it has 4 x 1Gig RAM) and the computer started, then I putted another gig of RAM and the computer still started. (starting=booting windows) When I putted in the 3th RAM it didn't boot anymore (again restarting all the time) so I removed this 3th gig of RAM and this is where it gets weird. I expected the computer to boot again because it is exactly the same configuration as before - which worked - but the computer didn't want to start. It just gave the same problem as before (restarting all the time.. ) Anyone an idea what might be wrong?

    Read the article

  • Diagnose remote desktop freezes in Windows 7 when no BSOD?

    - by Paul Smith
    Okay, I'm getting no joy from Asus or Microsoft on this, so hoping for some clues on how to narrow down the cause. I have very frequent OS freezes, always & only when running Remote Destkop Client (mstsc) in Windows 7 x64. I never have a bluescreen, and there is never a minidump. The display & input just freezes -- no keyboard, no mouse, and sound will just continue the last wavelength if any. So far, I can't find a way to trap the hang given that there's no bluescreen; advanced startup & recovery settings for system failure are "Write an event" checked, "Automatically restart" checked, and "Kernel memory dump". I've updated to the lasted BIOS, and tried a few different graphics drivers, both generic & ATI. I've also tried disabling Aero, and everything about the remote desktop experience (incrementally unchecked every box in the mstsc - options - experience tab), even disabled/unplugged external monitor to make sure it wasn't a dual-monitor issue. My specs are: Asus G73jh notebook 8GB RAM ATI Mobility Radeon HD 5800 Series graphics (recently tried driver versions 8.791.0.0, 8.801.0.0) American Megatrends G73jh.211 BIOS (7/27/2010) Windows 7 Home Premium x64 Windows Memory Diagnostic passed all of the following at least 3 times with no errors: MATS+ INVC LRAND Stride6 WMATS+ WINVC This notebook is better than most at removing heat (laudable vent design), so I'm not inclined to suspect thermal causes (especially since running 1080p video for hours has never caused a freeze, but mstsc does, reliably, within 5 minutes to an hour). This did seem to start happening after a Windows Update, but I've since reverted every patch applied since a week before the first occurrence, with no joy. (And I'd only had the PC for a couple weeks before that, so it could have been chance + less actual time spent remoting at the beginning.) I'm at my wits end, and I bought this laptop primarily as a remote terminal client (go figure, right?) Any ideas on how to identify the cause of this? Thanks!

    Read the article

  • computer fails to boot during/after POST for five or six boots, then works

    - by N13
    For the last few days, my computer has had issues booting. I've seen two different behaviors: The screen displays the graphics card information, then begins to list the RAM, hard drives, etc. At different points in this process (after the graphics info), the computer shuts off. After five or six attempts, it then boots normally. In roughly the same time frame, the computer freezes, and fails to boot. I think it boots successfully on the next attempt. I've also noticed that in some instances, the computer freezes on shutdown. It gets right to the point where it should shut off, but doesn't. I recently combined the best parts of two different machines into this one. I'm booting to GRUB, with Ubuntu 12.04, Linux Mint 11 and Windows Vista (unfortunately) as my OS options. It has an Enermax Modu82+ 525W power supply, and I've used an online calculator to determine that my load shouldn't exceed 400W. I even unplugged a hard drive, but that didn't help. I found the latest BIOS, patched it and checked the settings, but that didn't fix it. I'm fairly certain this issue didn't exist at first, but might have started when the power at my new apartment dropped for a second. The machine is plugged into a surge protector strip, but it's old and I've heard they lose effectiveness with age. Is a power dip as damaging as a spike? If something were damaged, why would it boot successfully after five or six attempts? It's almost like the BIOS or PSU need to be primed. The trouble with debugging is that there seems to be a "grace period" after shutdown where the issue doesn't present itself again. What should I try next?

    Read the article

  • Serious 64-bit laptop

    - by Daniel Gehriger
    For the past couple of years, I have been using an IBM Thinkpad T60p for daily work (software development, desktop & embedded). I am extremely satisfied with this machine, due to its robustness. It also has a few features I depend on: a high resolution display: 15.0" TFT FlexView display with 1600x1200 (UXGA); excellent keyboard; decent graphics and CPU performance. Some of the software I develop benefits from larger amounts of RAM, and 3GB (Windows 7 32-bit) or 4GB (Windows 7 64-bit on T60p) are no longer sufficient. My customers run desktop computers with 20GB and more, and I need to have at least 8GB to at least be able to run reasonable test cases. So I'm shopping around for a new laptop, but I'm struggling to find anything that matches my requirements: must run Windows 7 64-bit Pro or higher; must support at least 8GB of RAM (more is better) high screen resolution! While I prefer 4:3 I can live with wide screen. But I really hope to find something with a vertical screen resolution similar to what I have now... portable, so < 16" but = 14" I realize that FlexView isn't available anymore, but I'd like to avoid a glossy screen if possible. decent (not more) graphics performance, ideally hybrid (I'm doing a lot of CAD, never games). good keyboard reasonable CPU -- but I'm still fine with my current Core 2 Duo, so that shouldn't be too complicated. The T60p fits all those requirements, except the 8GB of RAM. Can you help me find a current notebook that would match most of them? I don't mind changing brand. Thanks!

    Read the article

  • DVI output only working on Windows, not during booting or on Linux

    - by Mononofu
    So yesterday I booted my laptop up and the external monitor I have it connected to just stayed black. At first, I thought the problem would go away when Ubuntu was loaded, but it didn't. I tried to reboot a few times, to no avail. Then I decided to give Windows 7 a try, and suddenly (at the login-screen), my external monitor turned on and worked like normal. I have connected the monitor via DVI, and this only seems to work with Windows now. I don't even get a signal in my BIOS! Mind you, everything was working fine before that, and I didn't change a single thing. I then tried to connect the monitor via VGA (from my DVI jack, which can output VGA using an adaptor), and it worked again. However, 1920x1200 using VGA looks like crap - black print on white background is basically illegible. Do you have any ideas how to fix this peculiar problem? I only use windows for gaming, so it's no real help that it still works normally. Please also excuse any spelling mistakes, I am practically typing this blindly. Edit: I only have one graphics card in my laptop, and I can't select anything related to that in my BIOS. In fact, I can pretty much do almost nothing there. My laptop is a Nexoc Osiris E703, graphics gard is a GeForce Go 7900 GTX. As I mentioned before, DVI output during booting and on Ubuntu was working fine for years before yesterday!

    Read the article

  • how is the the linux console displayed to the user and how does the user go about changing the conso

    - by Chris
    I've been searching for the last two day on trying to understand how the console displays itself to the user and how to change the console settings. I've had some luck along the way but nothing that I've found has giving me a real clear explanation of how the console is displayed or how to change or control it's display settings. Some examples that of what I'm looking for are as follows: How is the console displayed on the screen? I know with X11 it uses your graphics card driver to display graphics to the screen, but how is the consoles text mode handled? Could some one ether explain this to me or point me to an in-depth overview of it all? Is it possible to have multi-head support in console mode with separate tty's on each screen? If so how would I go about setting this up? How would you go about changing the size of the console display from the default 80x25 to a custom size? I'm testing anything I find on a debian testing build, which is just the minimal base install on a virtual box. In time I will be using this information to setup my main system which is multi-head with 3 monitors. I would like to be able to support all three displays in console mode if possible.

    Read the article

  • Half of installed RAM is hardware reserved

    - by user968270
    After a rather arduous and convoluted series of problems that left me without a desktop for ~80 days, I've finally got the thing up and running, having replaced the power supply, motherboard, graphics card and CPU. Now, however, I'm experiencing the 'hardware reserved RAM' issue. Perhaps this is the exhaustion talking, but looking at the question that tends to get pointed to when this kind of topic gets locked as a duplicate hasn't helped. I have 16 GB of RAM installed in an MSi 970A-G46, which is spec'd for up to 32 GB of RAM. The BIOS recognizes that I have 16 GB installed, and the resource monitor also shows the whole 16 GB, only it shows 8 GB as hardware reserved. I've seen suggestions that it's an OS issue, but the particular installation of Windows 7 (64-bit) which I'm running on my boot drive is the same as the one that could actually access the 16 GB in my previous motherboard (MSi 870A-G54). I've updated my BIOS using the MSi Live Update tool and restarted the machine with no effect, and I cannot seem to locate any 'Memory Remapping' option as I've seen mentioned. I've physically swapped the RAM between the slots to no effect. I've unchecked the Maximum Memory box in the msconfig Boot tab's advanced options, also to no effect. These are my system's basic specifications OS: Windows 7 Home Premium (64-Bit) Motherboard: MSi 970A-G46 CPU: AMD FX-8150 Graphics Card: XFX Radeon HD 6870 Boot Drive: OCZ Agility 3 Storage Drive: Samsung Spinpoint F3 ST1000DM005/HD103SJ 1TB PSU: Thermaltake TR-2 TR600 600W ATX12V v2.3

    Read the article

  • DVI output _only_ working on Windows, not during booting or on Linux

    - by Mononofu
    So yesterday I booted my laptop up and the external monitor I have it connected to just stayed black. At first, I thought the problem would go away when Ubuntu was loaded, but it didn't. I tried to reboot a few times, to no avail. Then I decided to give Windows 7 a try, and suddenly (at the login-screen), my external monitor turned on and worked like normal. I have connected the monitor via DVI, and this only seems to work with Windows now. I don't even get a signal in my BIOS! Mind you, everything was working fine before that, and I didn't change a single thing. I then tried to connect the monitor via VGA (from my DVI jack, which can output VGA using an adaptor), and it worked again. However, 1920x1200 using VGA looks like crap - black print on white background is basically illegible. Do you have any ideas how to fix this peculiar problem? I only use windows for gaming, so it's no real help that it still works normally. Please also excuse any spelling mistakes, I am practically typing this blindly. Edit: I only have one graphics card in my laptop, and I can't select anything related to that in my BIOS. In fact, I can pretty much do almost nothing there. My laptop is a Nexoc Osiris E703, graphics gard is a GeForce Go 7900 GTX. As I mentioned before, DVI output during booting and on Ubuntu was working fine for years before yesterday!

    Read the article

  • Wireless driver activation issue in Compaq c700 in Ubuntu 9.04

    - by Fazil
    I am using Ubuntu 9.04, I cant access my wireless driver, I activate the madwifi in administrationhardware drivers, but I could'nt activated the wireless too. when I type lspci I get the following message, ################################################## # 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 04) 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 04) 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 04) 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 04) 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 04) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f4) 00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 04) 00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 04) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 04) 01:00.0 Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01) 02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) ################################################## but when I tried in Windows I found that the driver for my laptop is ################################################ atheros AR5007 802.11b/g WiFi Adapter ################################################ so what can I do for solving this problem.

    Read the article

  • nVidia performance with newer X and newer driver abysmal with Compiz

    - by Nakedible
    I recently upgraded Debian to Xorg 2.9.4 and installed nvidia-glx from experimental, version 260.19.21. This was somewhat of an uphill battle as the dependencies for the experimental nvidia-glx package are still somewhat broken. I got it to work without forcing the installation of any packages and without modifying the packages. However, after the upgrade compiz performance has been abysmal. I am using the desktop wall plugin and switching viewports is really slow - takes a few seconds for each switch. In addition to this, every effect that compiz does, such as zoom animations for icons when launching applications, takes seconds. The viewport switching speed changes relative to the amount of windows on that virtual screen - empty screens switch almost at normal speed, single browser windows work almost decently, but just 4 rxvt terminals slows the switches down to a crawl. My compiz configuration should be pretty basic. Xorg is likewise configured without anything special - the only "custom" configuration is forcing the driver name to be "nvidia". I've fiddled around with the nvidia-settings and compizconfig trying different VSync settings, but none of those helped. My graphics card is: NVIDIA GPU NVS 3100M (GT218) at PCI:1:0:0 (GPU-0). This is laptop GPU that is from the Geforce GTX 200 series. Graphics card performance should naturally be no problem. EDIT: In the end, nothing really worked, and I got really annoyed with the state of compiz and its support in Debian. Many nVidia driver revisions have passed and I am using Gnome 3 now, so I am accepting the best answers to this question even though the issue was not resolved.

    Read the article

  • Diff bios - corrupt video driver

    - by sfonck
    Hi, I'm using an Dell M90 Precision Laptop which has a NVidia Quadro FX 2500M graphics card and is running Windows XP. Laptop has been running fine - but a few weeks ago screen went 'white' - restarted computer- bios and startup screens show weird green dots and stripes, normal startup only shows a black screen... only VGA mode works to display something. I've been trying to remove and reinstall the correct drivers downloaded from Dell's website - no solution. I gave up and reinstalled XP - everything was working perfect again. 2 weeks later - again the white screen - tried everything again (flashin new bios also - nothing works) Reinstalled XP - everyhting was working again, so I made a DriveSnapShot of the partition. Today - again the 'white screen'. Ok, no problem ...I was thinking all I needed to do was to restore the DriveSnapShot backup... Few minutes later the backup is restored ... but guess what: video driver does not work correctly... As the DriveSnapShot restored the complete partition, as it was at the time everything was working perfectly, this would mean my driver problems are due to 'settings' in the bios or on the graphics-card itself + these 'settings' can get overridden by doing a new XP-install.... I'm out of options, can somebody help me to find a solution for this problem: Is there some way to backup and restore a bios after seeing some problems? Is there some way to know what is causing this problem like a bios diff utility? Thanks!

    Read the article

  • Install Peppermint OS three on Asus EeePC

    - by Kithoth
    I just had a new Asus EeePC R051CX. Out of the box, the installed OS is Ubuntu 12.04 LTS, but I am trying to install Peppermint OS three (as single boot). Problem. Once on live CD (well, live USB stick...), I'm in trouble in both following situations: Try Peppermint OS Live In this case, the first thing I get is a message reading The system is running in low-graphics mode Your screen, graphics card, and input device settings could not be detected correctly. You will need to configure these yourself. I can solely press "return" to accept, then I have a list of 4 options to answer the question "What would you like to do?". But I simply can't do anything at this moment, except switching to console mode or rebooting (keyboard / mouse controls don't allow me to do anything else). Install Peppermint OS Something I really don't understand... it launches the Ubuntu Recovery Media (which was already installed when I received the device)! Also, it says in the bottom ERROR: This recovery media only functions on Ubuntu systems. All I can do is quit (that is, reboot). One last important thing that comes to my mind: this stick worked just fine on the other computers I've tried it on. I really hope someone could bring me the light, a friend of mine told me how cool this OS is for EeePCs. Don't want to give up! Thanks. Edit I finally could install Peppermint, but not by understanding why I couldn't do it the logical way. Instead, I reinstalled Ubuntu myself (erasing the factory one). Then, I could simply boot on my live USB and perform a fresh install of Peppermint. So, I still don't know how and why the mentioned problem occurred.

    Read the article

  • Nvidia GTX 660m crashes games

    - by dcap
    I just recently bought a Lenovo y580 with both HD intel graphics and an Nvidia GTX 660m. It works great except for one thing: playing games. Every time I load a game, either with Steam or Games for Windows Live, games will end up crashing. I've already talked with lenovo tech support and they couldn't help other than send my new laptop for repair which would take 7 days. So before I do that I thought I'd ask around. These are the games I've tested and what happens when they load: Civilization V: Game loads fine but once it gets loaded to the game, there's noticeable "tearing" popping up and certain things flash. Within a minute of this, the game crashes. Does the same thing regardless if Vsync is on or off. Total War Shogun2: Game gets to the menu screen. The background of the menu screen shows what is expected - slideshow of in-game environments rendered on high settings (this is expected). However, within 2 seconds of the menu loading up it crashes. Age of Empires 3 (Non-steam): This game is several years old so it should work on this brand new laptop fine. However the results are similar to that of Civilization V. Noticeable "Tearing" and after a few seconds it'll freeze/crash. I've done tests on all these games with both the latest stable Nvidia driver 285 as well as the nightly build 307. In addition, Nvidia control panel is set on using the dedicated graphics card for all programs. So is there anything I can do to fix this or will I have to send it back for a week to tech support?

    Read the article

  • Windows 7, Black screen with cursor, impossible to logon

    - by PJC
    First - I have gone through as many possible solutions I've found here and elsewhere. [Edit - to describe the issue in more detail, the PC appears to boot correctly, but instead of the logon screen, I have been getting a black screen WITH the pointer cursor, and it responds correctly to the mouse. Pressing CTL-ALT-DEL brings up the logon screen's background, but with no logon area nor any other content. This screen was at the full resolution before I uninstalled the graphics driver in safe-mode.] I also just ran a full up-to-date AVG scan from boot media. [Edit - the AVG scan, which was updated to today's virus signatures, found no issues at all.] So - steps I've tried: Safe Boot, Restore from before the issue - done, no help. Uninstall the graphics driver - done, now i have a 1024x768 fallback screen, still no way in. sfc /scannow - only doable from Safe boot obviously, but no change. [Edit - booting from restore media, performing a startup repair and...]Restore further back - restored to 2 days ago, and I'd had many reboots since then with no problem. Enable autologin to try to get beyond the login screen - done, doesn't work. It seems the best advice is complete reinstall, but I really don't want to do that because it'll take 3-4 days to add all the apps I use. Some key points to note - in both states - before and after removing the video driver, I always had a mouse cursor on the screen. CTL-ALT-DEL flashes up the login background, but no login info. I can (and often do) reinstall from scratch, but was at a fairly stable state before this, and would prefer not to. -Paul

    Read the article

  • Information on the BMPP File Extension/Format

    - by Angel Brighteyes
    I am looking for information on the file type BMPp. Namely I need an application that can create this file type, preferably open source or free. Wikipedia says for BMP File Format that 'BMPp' is a "type code", which is the "mechanism used by pre-OSX Macs ... to denote a files format..." (Look in the little info-box of general information under "Type code"). Continuing my research, I found an old 2009 archived mailing list "Re: Incorrect png file type 'PNG' that talks about something related to another problem a developer is having. In the response he talks about there being variant file types, and lists BMPp as being linked to an old version of Graphics Converter. The company Lemkesoft sells Graphics Converter, which I am not willing to purchase. I can't imagine that the only program in existence to make a BMPp file is that program. There has got to be another way to make that file type, other than creating a BMP file and just renaming it to BMPp (unless of course it is really that easy)? This is the first time I've run into this file format, and it took a bit on Google, Bing, and Wikipedia to find the information that I've posted here. Any further help would be appreciated.

    Read the article

  • Nvidia 9800GT randomly prevents computer from booting

    - by Blender
    My computer has been running Windows and Linux perfectly fine with my 9800GT for the past year or so, but today it refused to boot. When I press the power button, this is what happens: Power button flashes once. Fans whir. Graphics card makes clicking noise. Computer reboots. Go back to 1. The cycle just keeps going, and I have to yank the cord to make the computer stop. After about 30 attempts at booting it, the computer powers on and everything works. I'm pretty sure that the graphics card isn't malfunctioning, as I've been GPU computing on it for a while now without any hiccups. But the strange thing is, the computer boots perfectly fine in only 5 boots if I remove the card. The computer is a HP Pavilion a6028x Desktop PC: Processor: AMD Athlon 64 X2 (W) 4600+ 2.4 GHz (AM2 socket) Motherboard: ECS MCP61PM-HM (Nettle 1) RAM: 3GB DDR2 (two different brands) More specs here Does anybody know what could be the problem? Any help or information would be greatly appreciated!

    Read the article

  • Python 2.7 and Ubuntu 10.10: X11 fails

    - by c.a.p.
    Against every recommendation I have apt-get remove python in Ubuntu 10.10 (build 2.6.24-29-server x86_64) and apt-get install python2.7 Some built-in software with python2.6 dependencies (like firefox, other minor stuff) was fixed just by apt-get reinstalling or reinstalling from source and the system was stable for one day until I rebooted. Upon booting I got the message "ubuntu is running in low-graphics mode" I have an NVIDIA Quadro NVS 295 256 running on a HP Z600 Workstation so I sudoed: apt-get --purged nvidia* apt-get --purged xserver apt-get install linux-headers-generic apt-get install nvidia-* apt-get install xserver-xorg dpkg-reconfigure xserver-xorg nvidia-xconfig upon rebooting i get the same "ubuntu is running in low-graphics mode" if I decide to tell the boot menu to restart X, the Ubuntu 10.10 "load screen" shows up and does not do anything for hours. If I "X" the screen remains black for hours; ctrl-c shows that /etc/X11/xorg.conf did not produce any errors just a warning "Type "ONE_LEVEL"...". /var/log/Xorg.0.log issues the following warnings (no errors) (WW) AllowEmptyInput is on (WW) NVIDIA(0): UBB is incompatible If I "startX" I get /usr/bin/python: can't find '__main__.py"' in '/usr/share/command-not-found' Before re-installing xserver-xorg however "startX" ran, just by changing the resolution of the tty1 console. Any hints?

    Read the article

  • How do I disable DirectDraw and Direct3D acceleration on Windows 8? [closed]

    - by Favourite Chigozie Onwuemene
    Some old games that i would really like to play run slowly on some graphic drivers when direct3d acceleration is enabled. I have tried many suggestions but none seems to work. The only thing i have not tried is disabling direct3d acceleration. Is it possible to disable DirectDraw and Direct3D acceleration on my Windows 8 pc? There are certain bad versions of GeForce drivers that cause this problem. This is a problem in the drivers themselves and is unfortunately completely outside our control. The recommended way to fix this problem is to update your graphics card drivers (go to NVIDIA's web site for this). Alternatively, there is a workaround that alleviates or solves the slowdown problem altogether. Try this: Right-click on your desktop and select "Properties". Go to the "Settings" tab and click on "Advanced...". Click on the "Troubleshooting" tab and move the slider to the left until it says that all DirectDraw and Direct3D accelerations have been disabled (around the middle of the range). Finally, click on "OK". Note that this workaround might cause other games on your computer to slow down, so you may have to switch back and forth between settings, but it's certainly worth a try if you can't obtain an updated graphics driver. -source: interactionstudios

    Read the article

  • Does VLC Player work well on Windows 7 64-bit?

    - by ????
    I tried VLC Player on Windows 7 64-bit version and the playback was fine, but when the video is maximized the image is very pixelated. I tried this on a Radeon HD 2600 XT graphics card as well as a computer with an Intel graphics chipset and both have the same result. If I use VLC Player on Windows 7 32-bit instead of 64-bit, there is no pixelation. Is this a known problem or is there any method to fix it on Windows 7 64-bit? Update: there isn't a 32-bit vs 64-bit version of VLC player, is there? (unlike 7-Zip) I also tried GOM Player and it doesn't have the problem on Windows 7 64-bit. Update: Nov 4, 2009 VLC displays an update notice: VLC 1.0.3 is a minor release fixing many bugs, especially for Windows Vista and 7, but it also introduces 2 new modes for deinterlacing, and a new udev module. Major fixes are about WMA Pro support, Dolby tracks in 4.0, v4l/v4l2 and atsc and a crash in mjpeg demuxer. Update of translations are also part of this release.

    Read the article

  • How Mary Meeker’s Latest Findings May Make You Re-Imagine Commerce

    - by Brenna Johnson-Oracle
    0 0 1 954 5439 Endeca Technologies 45 12 6381 14.0 Normal 0 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:Cambria; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;} Today, Mary Meeker released her highly anticipated annual “Internet Trends” presentation for 2014. All 164 slides are jam-packed with pretty much everything you need to know about the state of the Internet. And as luck would have it, Oracle is staying ahead of these trends (but we’ll talk about that later). There were a few surprises, some stats to solidify what you likely already know, and Meeker’s novel observations about where we are all going. What interested me the most is not only how people are engaging in their personal lives, but how they engage with brands. As you could probably predict, Internet usage growth is slowing while tablet user and mobile data traffic growth continue their meteoric rise around the globe, with tremendous growth in underpenetrated markets like China, India, Brazil and Indonesia. Now hold those the “Internet is dead” comments. Keep in mind there’s still plenty of room to grow, and a multiscreen model is Meeker’s vision for our future. Despite 1.5x YOY growth for mobile traffic, mobile still only makes up about 23% of all traffic today. With tablet shipments easily outpacing figures for PCs even at their height (in 2007), mobile will only continue on it’s path, but won’t be everything to everyone. Mobile won’t replace every touchpoint, it’s just created our shorter attention spans and demand for simpler, more personal experiences. As Meeker points out TVs, tablets, PCs, and smartphones are used for different activities at present, but lines will blur (for example, 84% of smartphones owners use their device while watching TV). Day-to-day activities are being re-imagining through simple, beautiful user experiences. It seems like every day I discover a new way a brand/site/app made the most mundane or mounting task enjoyable and frictionless – and I’m not alone. Meeker points out the evolution of how we do everything from how we communicate, get information, use money, meet someone, get places, order a meal, and consume media is all done through new user interfaces that make day-to-day tasks simpler. This movement has caused just about everyone’s patience for a poor UX to take a nosedive. And it’s not just the digital user experience, technology is making a lot of people’s offline lives easier, and less expensive. Today 47% of online shopping utilizes free shipping— nearly half. And Meeker predicts same day local delivery will be the “next big thing” (and you can take a guess on who will own that). Content, Community and Commerce creates the “Internet Trifecta.” Meeker pointed out that when content, communities and commerce occur in a single experience it’s embraced by consumers, which translates to big dollars for brands. The magic happens when consumers can get inspired, research, and buy in a single experience. As the buying cycle has changed and touchpoints (Web, mobile, social, store) are no longer tied to “roles” or steps in the customer journey, brands must make all experiences (content and commerce) available in a single, adaptable experience. (We at Oracle Commerce have a lot to say on this topic – stay tuned!) And in what Meeker calls the “biggest re-imagination of all:” consumers enabled with smartphones and sensors are creating troves of findable and sharable data, which she says is in the early stages, by growing rapidly. She notes that transparency and patterns of consumers with this hardware (FYI - there are up to 10 sensors embedded in smartphones now) has created a Big Data treasure chest to be mined to improve business and the life of the consumer. The opportunities are endless. So what does it all mean for a company doing business online? Start thinking about how you can: Re-imagine your experience. Not your online experience and your mobile experience and your social experience – your overall experience. When consumers can research, buy, and advocate from anywhere (and their attention spans are at an all-time low) channels don’t exist. Enable simple and beautiful interactions informed by all of the online and offline data you leverage across your enterprise. Ethically leverage the endless supply of data (user generated content, clicks, purchases, in-store behavior, social activity) to make experiences more beautiful, more accurate, and more personalized (not to mention, more lucrative for you). Re-imagine content and commerce. Content and commerce must co-exist in a single destination where shoppers can get inspired, explore, research, share, and purchase in a collective experience. Think of how you can deliver an experience where all types of experiences (brand stories and commerce) adapt to every customer need. (Look for more on this topic coming soon). Re-imagine your reach. Look to Meeker’s findings to see how the global appetite for digital experiences is growing, but under-served in many places (i.e.: India, Mexico, Indonesia, Brazil, Philippines, etc.). Growing your online business to a new geography doesn’t have to mean starting from scratch or having an entirely new team manage the new endeavor. Expand using what you’ve already built in a multisite framework, with global language support. And of course, make sure it’s optimized for mobile! Re-imagine the possible. After every Meeker report, I’m always left with the thought “we are just at the beginning.” Everyday there is more data, more possibilities, more online consumers, and more opportunities to use new latest technology to get closer to your customers and be more successful. There’s a lot going on in our Product Development and Product Innovations groups to automate innovation for our customers, so that they can continue to stay ahead of these trends, without disrupting their business. Check out a recent interview with our Innovations Team on some of these new possibilities. Staying on track despite the seemingly endless possibilities out there is the hard part. Prioritizing where you will focus based on your unique brand promise, customer and goals is what you do best. To learn how Oracle Commerce can help your business achieve your goals check out oracle.com/commerce. Check out Meeker’s entire report here.

    Read the article

< Previous Page | 140 141 142 143 144 145 146 147 148 149 150 151  | Next Page >