Search Results

Search found 6887 results on 276 pages for 'internal'.

Page 144/276 | < Previous Page | 140 141 142 143 144 145 146 147 148 149 150 151  | Next Page >

• WLC 4400. Get IP

  - by Edward Connelly

  I have three SSID. one is a guest network and I'm having problems with lease times. Its set for web authentication so it passes IPs out even if someone doesn't try and authenticate. Is there a way to get that IP back and not hand another to that mac for a period of time? Poor planning and we didn't allocate enough address space, and we are sandwitched. We could go with another address, but we would have to reconfig lots. since its guest its vlan'd with no access to anthing but the firewalls. would have to change ACLs and routes and interfaces. if it isn't possible we will just have to go that route, just thought there might be an easier solution. session timeout is enabled with 1 hr lease time is set to 4 hrs. no helper DHCP and internal DHCP is set with the space split across three WLCs (60 waps split across those as well).

  Read the article

• rsync to ONLY keep files in destination that have been removed from source

  - by David Corley

  We use rsync to copy filesystem contents from one machine to another as a backup. We first run MACHINE-X-MACHINE-Y rsync for a straight backup with the --delete and --delete-excluded switches We also run an internal Rsync between the MACHINE-Y destination, and another folder on MACHINE-Y with either of the delete flags. This maintains a non-destructive copy in the event someone inadvertently deletes a file on MACHINE-X. However, it also has the overhead of being a complete copy of what has already been synchronized. Ideally I want to be able to run the non-destructive rsync in such a way that the destination ONLY receives the deleted files and so avoids unnecessary duplication . Is there any way to do this?

  Read the article

• How to use postfix header_checks with zarafa outgoing mail

  - by olvrlrnz

  I'm using zarafa as MDA with postfix. For privacy reasons I want to filter client internal IP-addresses and stuff like this. To do so I've added the following to master.cf: submission inet n - - - - smtpd [...] -o cleanup_service_name=subcleanup [...] and further down the file: subcleanup unix n - - - 0 cleanup -o header_checks=pcre:/etc/postfix/smtp_header_checks which works perfectly for clients delivering their mail through the submission port. But my zarafa is of course not using the submission port to send mail, hence it doesn't hit the subcleanup routine and outgoing mails contain a very nice X-Mailer: Zarafa-exact_version header which is rather unsatisfying. Is there any way to make zarafa use the subcleanup routine? Any help is much appreciated.

  Read the article

• Cross subnet connection

  - by user30472

  My internal Windows 2008 AD network is 172.20.xxx.xxx My Apple Wireless base stations only allows DHCP 172.16.xxx.xxx Private IP address ranges: 10.0.0.0 to 10.255.255.255 172.16.0.0 to 172.31.255.255 192.168.0.0 to 192.168.255.255 The problem: The internet works from my IPad that has a 172.16.xxx.xxx address, but I can't access (browse) my tools server that is 172.20.xxx.xxx that host my Filemaker database. Is it possible to add 172.16.xxx.xxx range somewhere in DHCP or DNS on my Windows domain server so I can access tools? Or is there another way to make this connection work? Thanks

  Read the article

• Is a Hostname A Entry necessary?

  - by Citizen

  When I log into WHM, I get this message: The server was unable to lookup an an A entry for its hostname (server226.taxi.com). This is generally because the entry was never added. However this could also be the result of your nameserver(s) being down. If you would like to attempt to automatically add the entry, click here. If I click "here" it does nothing and I still get the message. I'm not hosting websites for other people, just internal projects on our server. Does not having an A Hostname Record affect SEO or anything like that or is this just a convenience when setting up nameservers or something like that?

  Read the article

• Software RAID 1 broken, how do I fix this?

  - by Edward

  I'm running CentOS 6 x86_64. There is a software RAID 1 being used on the two internal 80GB drives. I got the following e-mail sent to me: A DegradedArray event had been detected on md device /dev/md1. Faithfully yours, etc. P.S. The /proc/mdstat file currently contains the following: Personalities : [raid1] md0 : active raid1 sda1[0] 511988 blocks super 1.0 [2/1] [U_] md1 : active raid1 sda2[0] 8190968 blocks super 1.1 [2/1] [U_] bitmap: 1/1 pages [4KB], 65536KB chunk md4 : active raid1 sdc1[0] sdb1[1] 1953512400 blocks super 1.2 [2/2] [UU] md3 : active raid1 sdd5[1] sda5[0] 61224892 blocks super 1.1 [2/2] [UU] bitmap: 1/1 pages [4KB], 65536KB chunk md2 : active raid1 sdd3[1] sda3[0] 8190968 blocks super 1.1 [2/2] [UU] unused devices: <none> The system appears to have booted fine and is working. The two drives' content did not change at all. I only removed and reinstalled them while I was booted on the CentOS Live DVD. How do I get the array working again?

  Read the article

• Can only connect to IIS site through localhost

  - by Rembrandt Q. Einstein

  I'm building a web service for my company's iPhone application, and everything's been working smoothly by running tests through localhost on the development machine. I'm now in the phase where I need to test connections from other computers within the network, and any connection other than localhost gives me a 404. My internal IP, 127.0.0.1, and computername all get 404 when connecting from any computer, either the one the site's hosted on or any others on the network. Telnet can get through to port 80, and I've temporarily disabled all firewalls on this machine (I do not have control over the external firewall, but I'm only testing connections within the network) Does anyone have a clue why this is happening? I was able to connect to the web service from other computers when hosted on a Mac via Apache, but because I'm now using a SQL Server connection I'm restricted to using IIS for Windows Authentication. Googling only provided answers related to firewalls, and mine is disabled note: I cannot use Anonymous Authentication, but even in testing that it did not affect the issue.

  Read the article

• Swap files in Cloud Infrastructures

  - by ffeldhaus

  At our company we set up an OpenStack Cloud and are currently creating internal guidelines for creation of OS templates / images. One controversial topic was if we should provide swap inside the VM templates. Therefore I'd like to ask the following questions From an elastic Cloud provider point of view, does it make sense to offer swap partitions / files in the VM templates or is swap not needed when a VM can be resized? Which scenarios necessarily demand a swap file to be present? What kind of Storage should be used for swap files (e.g. local / central, FC / iSCSI / NFS)? Are there any best practices for offering swap files in a performant way in Cloud Infrastructures?

  Read the article

• Able to send, but not receive from gmail.com within Outlook 2003 (0x800CCC0F)

  - by matt_tm

  In my home network, I'm able to access my @gmail.com and @otherdomain.com accounts via POP3 from Outlook 2003. When accessing from my office network, I'm not able to receive, but am able to send. I get the following error: Task '[email protected] - Receiving' reported error (0x800CCC0F) : 'The connection to the server was interrupted. If this problem continues, contact your server administrator or Internet service provider (ISP).' The POP3 is set to 995 (using SSL), SMTP to 465 (using SSL), Logon using SPA is NOT enabled. There is NO change I make on my system from the office to home network, except my local, internal IP address changes.

  Read the article

• Unable to do Port Forwarding in Virtual Box

  - by dewbot

  I'm using Mac OS X 10.6. I have installed Virtual Box 4.1.0 in it. My Guest OS is Ubuntu Server 11.04. I have added a rule in Port Forwarding in Virtual Box - "guestssh" TCP 127.0.1.1 8080 127.0.0.1 1337 Inside Guest OS I'm running nodejs server. Code is nothing but simple helloworld code found on their site http://nodejs.org/. In short I'm running server on 127.0.0.1 on 1337 Port. Now according to rule I have given, from Host Machine all the requests for 127.0.1.1:8080 should be forwarded to 127.0.0.1:1337 of Guest OS. From Host I'm doing curl http://127.0.1.1:8080 and I'm getting curl: (7) couldn't connect to host Is there something am I doing wrong? Note- Don't give me suggestion to do ssh n all. As my ISP does not provide Internal LAN so its not possible in my case. All I can do it Port Forwarding.

  Read the article

• Tests for hard drive health

  - by Samik R

  I have a 5-year old hard drive (bought new at the time), but it was sitting in my closet for 5 years, unused. I have just started using it, and seems to be getting a whirring sound (rather distinct from the other noises like fans etc.). I ran a few diagnostics tests, like Seagate's SeaTools, and the SMART test, and a few generic tests and all passed. Should I be concerned? Is there any other test that I should run? It's an internal IDE WD 5400RPM drive. Being used for a desktop, which is itself pretty high-end (AMD Phenom II X6 1100T, AMD Radeon GPU etc.), but would be used rather occasionally to begin with (avg. 1-2 hrs. per day). Thanks for any pointers.

  Read the article

• What is the best file system to use for a second hard drive when dual booting between WinXP and Win7

  - by Corey

  I am dual booting for legacy reasons, and I have a 2nd internal drive that I would like to use from both XP and 7. Should I go with the standard NTFS? (will the secuirty features be an issue, with different SIDs from the different users) Should I go with FAT32? Should I try out the new exFAT? Also, I curently have two of my 3 drives as "dynamic disks" and 1 spaned volume created on them. (i did this from XP) Win7 can see them/it fine. Is this an ok thing to do?

  Read the article

• What is the best file system to use for a second hard drive when dual booting between WinXP and Win7

  - by Corey

  What is the best file system to use for a second hard drive when dual booting between WinXP and Win7? I am dual booting for legacy reasons, and I have a 2nd internal drive that I would like to use from both XP and 7. Should I go with the standard NTFS? (will the secuirty features be an issue, with different SIDs from the different users) Should I go with FAT32? Should I try out the new exFAT? Also, I curently have two of my 3 drives as "dynamic disks" and 1 spaned volume created on them. (i did this from XP) Win7 can see them/it fine. Is this an ok thing to do?

  Read the article

• Will SSD degrade when running VMWare Workstation from SSD?

  - by Andrey Botalov

  My main OS (Windows 7 or 8) is runned from SSD. I'd want to run Mac OS X 10.7 or 10.8 using VMWare workstation. I've heard that VMWare doesn't support TRIM and other things to optimize SSD usage. So SSD will quickly degrade if VM will be runned from SSD. Will it be better to put guest OS's files (.vmdk and the rest) to external HDD (connected through USB 2 or 3) instead of SSD? What advantages and disadvantages it will give? What if VM will be put to internal HDD? At what drive type performance of VM will be better?

  Read the article

• switch OFF syn cookies

  - by Nick

  We have several servers they have public IP's, but work together (one is with Load Balancer, orther with Apache Web server, other with MySQL and so on. Most of the ports are fire-walled, so only "local" servers can be connect there. However ALL servers have some ports that must be publicly open. We have SYN Cookies enabled and from time to time we got: possible SYN flooding on port 8080. Sending cookies. Port 8080 is not public. How we can switch OFF SYN Cookies for some ports (e.g. 8080, 3306 etc) or from some sources (e.g. our servers), but in same time SYN Cookies to be switched ON for all other ports, e.g. port 80. We found this similar problem, except our servers are with public IP's: SYN cookies on internal machines

  Read the article

• Configuring bridged network connection --- Windows 7 host, Ubuntu 10.04 guest --- VMWare Workstation 8

  - by H3br3wHamm3r81

  Here is my IPCONFIG /ALL from the host (Windows 7 64-bit): Here is my IFCONFIG from the guest (Ubuntu 10.04): To be honest, I don't have experience configuring a network between a host and a guest in VMWare (a virtual machine). I've searched high and low on the internet, but I haven't seen anything that can help. Perhaps I'm just not using the right keywords when I search. Nevertheless, does anyone here have any experience with establishing a network connection? Edit: One important note. I don't use DHCP to provide private addresses to the hosts on my LAN. I use "static" IP addresses on my internal network by configuring each IP address manually in the host's network configuration utility (I have TV's, XBOX 360, and a few PC's). I would like to configure the IP on the virtual machine guest manually as well. The reason is because my XBOX 360 only works properly using a static IP address. It will kick me off XBOX Live if it has one given by the router (via DHCP).

  Read the article

• How to forward http traffic through a specific network adapter.

  - by user18129

  i have the following scenario. Two laptops are connected via a router through the Ethernet ports. These two computers need to be able to communicate together. One computer also needs to access the internet through a different adapter (i.e. we will taking these two laptops two various sites where by the most common type of internet access will be wireless).In isolation all of the various adapters work fine (i.e. the internal network works fine, and the wireless connects to the internet). However,we try to turn on all of the adapters at the same time,the following occurs: If we bridge the two network connections together on the "Server" -The internet connection doesn't work through the wireless If we don't bridge the connections The internet connections don't work It seems like http traffic is trying to be sent through the Ethernet adapter (which of course is not connected to an internet connection). How can we solve this?

  Read the article

• Function key taken by another program, how to default it

  - by Milox

  Everytime I press the F11 key it opens up a browser window with the same URL. This happens anywhere I press it and I need this key to have it's default behavior because I use it to program on Visual Studio (Windows 7). Any ideas why this is happening and how to go back to default function keys?, I haven't installed anything that I remember can cause this behavior. This is a standard Dell desktop key board, no multimedia keys, like this one: Firing URL is http://argos:8080/Login.jsp?jsessionid=55rh3obsahm9m seems like one of our company's internal addresses but IT guys say they have no idea about it. I don't see any suspicious software that can be causing this.

  Read the article

• Possible to redirect from HTTPS to HTTP behind load-balancer?

  - by Derek Hunziker

  I have a basic ASP.NET application that sits behind an F5 load-balancer. Incoming SSL requests (over HTTPS) terminate at the load-balancer and all internal communication between the load-balancer and my application servers is unsecure (over HTTP). When a unsecure request comes in, my app is able to use Response.Redirect("https://...") to redirect a secure URL with no problems. However, the other direction appears to be impossible - I cannot redirect from HTTPS to HTTP using Response.Redirect() from my application. The URL remains HTTPS for the client and does not change. Could the F5 be preventing the redirect for ever reaching the client? Is there any special configuration necessary to let this happen?

  Read the article

• Windows 7 + Bind on Ubuntu - DNS keeps stopping

  - by fistameeny

  I have a Bind DNS server running from Ubuntu 12.04 LTS Server 64 bit. In there, I've setup some local A records for internal websites, e.g. wiki.domain.local. Everything works fine, except that every so often (a few times a day), the DNS stops responding on client machines (running Windows 7). The only way I've found to fix it is to stop/start the dnscache service on the Windows machine. Sometimes if I just wait for a few minutes, the DNS will start to work again. I've checked the Windows event log and can't see anything relevant. I've also had a look in the Bind logs and can't see anything there. Has anyone experienced this before?

  Read the article

• Cross subnet connection [closed]

  - by user30472

  My internal Windows 2008 AD network is 172.20.xxx.xxx My Apple Wireless base stations only allows DHCP 172.16.xxx.xxx Private IP address ranges: 10.0.0.0 to 10.255.255.255 172.16.0.0 to 172.31.255.255 192.168.0.0 to 192.168.255.255 The problem: The internet works from my IPad that has a 172.16.xxx.xxx address, but I can't access (browse) my tools server that is 172.20.xxx.xxx that host my Filemaker database. Is it possible to add 172.16.xxx.xxx range somewhere in DHCP or DNS on my Windows domain server so I can access tools? Or is there another way to make this connection work? Thanks

  Read the article

• Windows PC's Intermittant Network faults.

  - by Kristiaan

  Hello everyone, im running into some issues with our client PC's (windows xp sp3 systems). this morning we ran into some problems with PC's not connecting to internal / external systems intermittantly. this would manifest as a problem connecting to any service, email, web, backoffice database systems etc. given a random amount of time be it a few minutes etc the problem would disapear and the pc would carry on as normal, some systems however have not been able to connect to certain sytems since the problem initally happened. im hoping for some suggestions / network diag advice really to help me locate the cause of this problem. all the clients are windows xp, connecting to a domain controller that is windows 2003 std this server also acts as a DNS server for us. we also have websense 7.0.1 installed on it to filter traffic.

  Read the article

• Repairing a TFS 2005 install or starting anew.

  - by Johan Buret

  Following : Installing Team Foundation Server on a shared database instance We did use a shared database instance setup for TFS 2005, and that was not a good idea, because of the Reporting Service dependency. The reporting instance on the server gives error code 404. What works now Basic source code control. We're able to check in and out source code. What doesn't work : Everything else, including : Opening and creating new team projects. Build automation. Internal bug tracking. Goal setup Having a fully working TFS install, and keeping the history. 1) A full install of TFS 2005 on the same server, but within its own database and reporting instance. 2) Using another server might be an option, but it's really not prefered Downtime should be minimum, my colleagues needs to be able to work on the source Readings I've read the MSDN page about moving/restoring TFS 2005, but I'm still unsure about what to do. Thanks in advance for help

  Read the article

• Frequent occurence of FULL GC.

  - by Viji

  Hi, There is a frequent occurence of FULL GC in our system. We are using Java application running on Tomcat server. Our application is running using internal load balancer setup. We are seeing lot of Full GC's in the server logs due to which the application is hung and Proxy errors are occured. The Java parameter values we are using are: Webapp wrapper: wrapper.java.additional.4=-Xms382M wrapper.java.additional.5=-Xmx1024M Backapp wrapper: wrapper.java.additional.4=-Xms382M wrapper.java.additional.5=-Xmx1024M The error found in webapp wrapper logs: INFO | jvm 1 | 2010/11/26 09:33:19 | [PSYoungGen: 1398460K-140291K(1514624K)] 4623364K-3491394K(5009920K), 0.7285303 secs] [Times: user=1.42 sys=0.00, real=0.72 secs] INFO | jvm 1 | 2010/11/26 09:33:19 | 68539.126: [Full GC DEBUG | wrapperp | 2010/11/26 09:33:19 | send a packet PING : ping Tried to change the JVM values to increase the heap size. But of no use. I suspect that there could be some other reason other than these parameters which is causing the issue. Can anyone please help me on this?

  Read the article

• Windows 2008 Server on VMWare (hardware)

  - by Bill

  I want to setup a single server to run a few virtual servers for our datacenter. I do not have a lot of money to spend so I am trying to gain bang for the buck. My budget is around $2,000. So I was thinking about building the following as the VMWare physical server: Intel iCore 7 950 (LGA1366, 4 cores,8 threads) Gigabyte GA-X58-USB3 LGA 1366 X58 ATX Intel Motherboard 24 GB of Viper II Series, Sector 7 Edition, Extreme Performance DDR3-1600 (PC3-12800) CL9 Triple Channel Memory VelociRaptor 300GB 10,000 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive I am planning on running the newest version of VMWare ESXi (64-bit). On these I am planning on running a few various servers: Windows 2008 Server R2 w/ IIS (several custom built ASP.NET Apps) Windows 2008 Server R2 w/ MS SQL 2008 Database Server Linux Web Server w/ Several WordPress Blogs (XAMPP?) Windows 2008 Server R2 w/ IIS (DEV ENVIRONMENT) Windows 2008 Server R2 w/ MS SQL 2008 Database Server (DEV ENVIRONMENT) In your opinion, will this hardware be sufficient to run the above load with room for possible 2-3 more virtual machines (probably lightweight web servers)?

  Read the article

< Previous Page | 140 141 142 143 144 145 146 147 148 149 150 151  | Next Page >