Search Results

Search found 11639 results on 466 pages for 'numerical methods'.

Page 144/466 | < Previous Page | 140 141 142 143 144 145 146 147 148 149 150 151  | Next Page >

• Ongoing confusion about ivars and properties in objective C

  - by Earl Grey

  After almost 8 months being in ios programming, I am again confused about the right approach. Maybe it is not the language but some OOP principle I am confused about. I don't know.. I was trying C# a few years back. There were fields (private variables, private data in an object), there were getters and setters (methods which exposed something to the world) ,and properties which was THE exposed thing. I liked the elegance of the solution, for example there could be a class that would have a property called DailyRevenue...a float...but there was no private variable called dailyRevenue, there was only a field - an array of single transaction revenues...and the getter for DailyRevenue property calculated the revenue transparently. If somehow the internals of daily revenue calculation would change, it would not affect somebody who consumed my DailyRevenue property in any way, since he would be shielded from getter implementation. I understood that sometimes there was , and sometimes there wasn't a 1-1 relationship between fields and properties. depending on the requirements. It seemed ok in my opinion. And that properties are THE way to acces the data in object. I know the difference betweeen private, protected, and public keyword. Now lets get to objectiveC. On what factor should I base my decision about making someting only an ivar or making it as a property? Is the mental model the same as I describe above? I know that ivars are "protected" by default, not "private" asi in c#..But thats ok I think, no big deal for my presnet level of understanding the whole ios development. The point is ivars are not accesible from outside (given i don't make them public..but i won't). The thing that clouds my clear understanding is that I can have IBOutlets from ivars. Why am I seeing internal object data in the UI? *Why is it ok?* On the other hand, if I make an IBOutlet from property, and I do not make it readonly, anybody can change it. Is this ok too? Let's say I have a ParseManager object. This object would use a built in Foundation framework class called NSXMLParser. Obviously my ParseManager will utilize this nsxmlparser's capabilities but will also do some additional work. Now my question is, who should initialize this NSXMLParser object and in which way should I make a reference to it from the ParseManager object, when there is a need to parse something. A) the ParseManager -1) in its default init method (possible here ivar - or - ivar+ppty) -2) with lazyloading in getter (required a ppty here) B) Some other object - who will pass a reference to NSXMLParser object to the ParseManager object. -1) in some custom initializer (initWithParser:(NSXMLPArser *) parser) when creating the ParseManager object.. A1 - the problem is, we create a parser and waste memory while it is not yet needed. However, we can be sure that all methods that are part ot ParserManager object, can use the ivar safely, since it exists. A2 - the problem is, the nsxmlparser is exposed to outside world, although it could be read only. Would we want a parser to be exposed in some scenario? B1 - this could maybe be useful when we would want to use more types of parsers..i dont know... I understand that architectural requirements and and language is not the same. But clearly the two are in relation. How to get out of that mess of my? Please bear with me, I wasn't able to come up with a single ultimate question. And secondly, it's better to not scare me with some superadvanced newspeak that talks about some crazy internals (what the compiler does) and edge cases.

  Read the article

• Unleash the Power of Cryptography on SPARC T4

  - by B.Koch

  by Rob Ludeman Oracle’s SPARC T4 systems are architected to deliver enhanced value for customer via the inclusion of many integrated features.  One of the best examples of this approach is demonstrated in the on-chip cryptographic support that delivers wire speed encryption capabilities without any impact to application performance.  The Evolution of SPARC Encryption SPARC T-Series systems have a long history of providing this capability, dating back to the release of the first T2000 systems that featured support for on-chip RSA encryption directly in the UltraSPARC T1 processor.  Successive generations have built on this approach by support for additional encryption ciphers that are tightly coupled with the Oracle Solaris 10 and Solaris 11 encryption framework.  While earlier versions of this technology were implemented using co-processors, the SPARC T4 was redesigned with new crypto instructions to eliminate some of the performance overhead associated with the former approach, resulting in much higher performance for encrypted workloads. The Superiority of the SPARC T4 Approach to Crypto As companies continue to engage in more and more e-commerce, the need to provide greater degrees of security for these transactions is more critical than ever before.  Traditional methods of securing data in transit by applications have a number of drawbacks that are addressed by the SPARC T4 cryptographic approach. 1. Performance degradation – cryptography is highly compute intensive and therefore, there is a significant cost when using other architectures without embedded crypto functionality.  This performance penalty impacts the entire system, slowing down performance of web servers (SSL), for example, and potentially bogging down the speed of other business applications.  The SPARC T4 processor enables customers to deliver high levels of security to internal and external customers while not incurring an impact to overall SLAs in their IT environment. 2. Added cost – one of the methods to avoid performance degradation is the addition of add-in cryptographic accelerator cards or external offload engines in other systems.  While these solutions provide a brute force mechanism to avoid the problem of slower system performance, it usually comes at an added cost.  Customers looking to encrypt datacenter traffic without the overhead and expenditure of extra hardware can rely on SPARC T4 systems to deliver the performance necessary without the need to purchase other hardware or add-on cards. 3. Higher complexity – the addition of cryptographic cards or leveraging load balancers to perform encryption tasks results in added complexity from a management standpoint.  With SPARC T4, encryption keys and the framework built into Solaris 10 and 11 means that administrators generally don’t need to spend extra cycles determining how to perform cryptographic functions.  In fact, many of the instructions are built-in and require no user intervention to be utilized.  For example, For OpenSSL on Solaris 11, SPARC T4 crypto is available directly with a new built-in OpenSSL 1.0 engine, called the "t4 engine."  For a deeper technical dive into the new instructions included in SPARC T4, consult Dan Anderson’s blog. Conclusion In summary, SPARC T4 systems offer customers much more value for applications than just increased performance. The integration of key virtualization technologies, embedded encryption, and a true Enterprise Operating System, Oracle Solaris, provides direct business benefits that supersedes the commodity approach to data center computing.   SPARC T4 removes the roadblocks to secure computing by offering integrated crypto accelerators that can save IT organizations in operating cost while delivering higher levels of performance and meeting objectives around compliance. For more on the SPARC T4 family of products, go to here.

  Read the article

• Entity Framework - Single EMDX Mapping Multiple Database

  - by michaelalisonalviar

  Because of my recent craze on Entity Framework thanks to Sir Humprey, I have continuously searched the Internet for tutorials on how to apply it to our current system. So I've come to learn that with EF, I can eliminate the numerous coding of methods/functions for CRUD operations, my overly used assigning of connection strings, Data Adapters or Data Readers as Entity Framework will map my desired database and will do its magic to create entities for each table I want (using EF Powertool) and does all the methods/functions for my Crud Operations. But as I begin applying it to a new project I was assigned to, I realized our current server is designed to contain each similar entities in different databases. For example Our lookup tables are stored in LookupDb, Accounting-related tables are in AccountingDb, Sales-related tables in SalesDb. My dilemma is I have to use an existing table from LookupDB and use it as a look-up for my new table. Then I have found Miss Rachel's Blog (here)Thank You Miss Rachel!  which enables me to let EF think that my TableLookup1 is in the AccountingDB using the following steps. Im on VS 2010, I am using C# , Using Entity Framework 5, SQL Server 2008 as our DB ServerStep 1:Creating A SQL Synonym. If you want a more detailed discussion on synonyms, this was what i have read -> (link here). To simply put it, A synonym enabled me to simplify my query for the Look-up table when I'm using the AccountingDB fromSELECT [columns] FROM LookupDB.dbo.TableLookup1toSELECT [columns] FROM TableLookup1Syntax: CREATE SYNONYM  TableLookup1(1) FOR LookupDB.dbo.TableLookup1 (2)1. What you want to call the table on your other DB2. DataBaseName.schema.TableNameStep 2: We will now follow Miss Rachel's steps. you can either visit the link on the original topic I posted earlier or just follow the step I made.1. I created a Visual Basic Solution that will contain the 4 projects needed to complete the merging2. First project will contain the edmx file pointing to the AccountingDB3. Second project will contain the edmx file pointing to the LookupDB4. Third Project will will be our repository of the merged edmx file. Create an edmx file pointing To AccountingDB as this the database that we created the Synonym on.Reminder: Aside from using the same name for the Entities, please make sure that you have the same Model Namespace for all your Entities  5. Fourth project that will contain the beautiful EDMX merger that Miss Rachel created that will free you from Hard coding of the merge/recoding the Edmx File of the third project everytime a change is done on either one of the first two projects' Edmx File.6. Run the solution, but make sure that on the solutions properties Single startup project is selected and the project containing the EDMX merger is selected.7. After running the solution, double click on the EDMX file of the 3rd project and set Lazy Loading Enabled = False. This will let you use the tables/entities that you see in that EDMX File.8. Feel free to do your CRUD Operations.I don't know if EF 5 already has a feature to support synonyms as I am still a newbie on that aspect but I have seen a linked where there are supposed suggestions on Entity Framework upgrades and one is the "Support for multiple databases"  So that's it! Thanks for reading!

  Read the article

• Improving WIF&rsquo;s Claims-based Authorization - Part 1

  - by Your DisplayName here!

  As mentioned in my last post, I made several additions to WIF’s built-in authorization infrastructure to make it more flexible and easy to use. The foundation for all this work is that you have to be able to directly call the registered ClaimsAuthorizationManager. The following snippet is the universal way to get to the WIF configuration that is currently in effect: public static ServiceConfiguration ServiceConfiguration {     get     {         if (OperationContext.Current == null)         {             // no WCF             return FederatedAuthentication.ServiceConfiguration;         }         // search message property         if (OperationContext.Current.IncomingMessageProperties. ContainsKey("ServiceConfiguration"))         {             var configuration = OperationContext.Current. IncomingMessageProperties["ServiceConfiguration"] as ServiceConfiguration;             if (configuration != null)             {                 return configuration;             }         }         // return configuration from configuration file         return new ServiceConfiguration();     } }   From here you can grab ServiceConfiguration.ClaimsAuthoriationManager which give you direct access to the CheckAccess method (and thus control over claim types and values). I then created the following wrapper methods: public static bool CheckAccess(string resource, string action) {     return CheckAccess(resource, action, Thread.CurrentPrincipal as IClaimsPrincipal); } public static bool CheckAccess(string resource, string action, IClaimsPrincipal principal) {     var context = new AuthorizationContext(principal, resource, action);     return AuthorizationManager.CheckAccess(context); } public static bool CheckAccess(Collection<Claim> actions, Collection<Claim> resources) {     return CheckAccess(new AuthorizationContext(         Thread.CurrentPrincipal.AsClaimsPrincipal(), resources, actions)); } public static bool CheckAccess(AuthorizationContext context) {     return AuthorizationManager.CheckAccess(context); } I also created the same set of methods but called DemandAccess. They internally use CheckAccess and will throw a SecurityException when false is returned. All the code is part of Thinktecture.IdentityModel on Codeplex – or via NuGet (Install-Package Thinktecture.IdentityModel).

  Read the article

• Drawing transparent glyphs on the HTML canvas

  - by Bertrand Le Roy

  The HTML canvas has a set of methods, createImageData and putImageData, that look like they will enable you to draw transparent shapes pixel by pixel. The data structures that you manipulate with these methods are pseudo-arrays of pixels, with four bytes per pixel. One byte for red, one for green, one for blue and one for alpha. This alpha byte makes one believe that you are going to be able to manage transparency, but that’s a lie. Here is a little script that attempts to overlay a simple generated pattern on top of a uniform background: var wrong = document.getElementById("wrong").getContext("2d"); wrong.fillStyle = "#ffd42a"; wrong.fillRect(0, 0, 64, 64); var overlay = wrong.createImageData(32, 32), data = overlay.data; fill(data); wrong.putImageData(overlay, 16, 16); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } where the fill method is setting the pixels in the lower-left half of the overlay to opaque red, and the rest to transparent black. And here’s how it renders: As you can see, the transparency byte was completely ignored. Or was it? in fact, what happens is more subtle. What happens is that the pixels from the image data, including their alpha byte, replaced the existing pixels of the canvas. So the alpha byte is not lost, it’s just that it wasn’t used by putImageData to combine the new pixels with the existing ones. This is in fact a clue to how to write a putImageData that works: we can first dump that image data into an intermediary canvas, and then compose that temporary canvas onto our main canvas. The method that we can use for this composition is drawImage, which works not only with image objects, but also with canvas objects. var right = document.getElementById("right").getContext("2d"); right.fillStyle = "#ffd42a"; right.fillRect(0, 0, 64, 64); var overlay = wrong.createImageData(32, 32), data = overlay.data; fill(data); var overlayCanvas = document.createElement("canvas"); overlayCanvas.width = overlayCanvas.height = 32; overlayCanvas.getContext("2d").putImageData(overlay, 0, 0); right.drawImage(overlayCanvas, 16, 16); And there is is, a version of putImageData that works like it should always have:

  Read the article

• SQL SERVER – How to Roll Back SQL Server Database Changes

  - by Pinal Dave

  In a perfect scenario, no unexpected and unplanned changes occur. There are no unpleasant surprises, no inadvertent changes. However, even with all precautions and testing, there is sometimes a need to revert a structure or data change. One of the methods that can be used in this situation is to use an older database backup that has the records or database object structure you want to revert to. For this method, you have to have the adequate full database backup and a tool that will help you with comparison and synchronization is preferred. In this article, we will focus on another method: rolling back the changes. This can be done by using: An option in SQL Server Management Studio T-SQL, or ApexSQL Log The first two solutions have been described in this article The disadvantages of these methods are that you have to know when exactly the change you want to revert happened and that all transactions on the database executed in a specific time range are rolled back – the ones you want to undo and the ones you don’t. How to easily roll back SQL Server database changes using ApexSQL Log? The biggest challenge is to roll back just specific changes, not all changes that happened in a specific time range. While SQL Server Management Studio option and T-SQL read and roll forward all transactions in the transaction log files, I will show you a solution that finds and scripts only the specific changes that match your criteria. Therefore, you don’t need to worry about all other database changes that you don’t want to roll back. ApexSQL Log is a SQL Server disaster recovery tool that reads transaction logs and provides a wide range of filters that enable you to easily rollback only specific data changes. First, connect to the online database where you want to roll back the changes. Once you select the database, ApexSQL Log will show its recovery model. Note that changes can be rolled back even for a database in the Simple recovery model, when no database and transaction log backups are available. However, ApexSQL Log achieves best results when the database is in the Full recovery model and you have a chain of subsequent transaction log backups, back to the moment when the change occurred. In this example, we will use only the online transaction log. In the next step, use filters to read only the transactions that happened in a specific time range. To remove noise, it’s recommended to use as many filters as possible. Besides filtering by the time of the transaction, ApexSQL Log can filter by the operation type: Table name: As well as transaction state (committed, aborted, running, and unknown), name of the user who committed the change, specific field values, server process IDs, and transaction description. You can select only the tables affected by the changes you want to roll back. However, if you’re not certain which tables were affected, you can leave them all selected and once the results are shown in the main grid, analyze them to find the ones you to roll back. When you set the filters, you can select how to present the results. ApexSQL Log can automatically create undo or redo scripts, export the transactions into an XML, HTML, CSV, SQL, or SQL Bulk file, and create a batch file that you can use for unattended transaction log reading. In this example, I will open the results in the grid, as I want to analyze them before rolling back the transactions. The results contain information about the transaction, as well as who and when made it. For UPDATEs, ApexSQL Log shows both old and new values, so you can easily see what has happened. To create an UNDO script that rolls back the changes, select the transactions you want to roll back and click Create undo script in the menu. For the DELETE statement selected in the screenshot above, the undo script is: INSERT INTO [Sales].[PersonCreditCard] ([BusinessEntityID], [CreditCardID], [ModifiedDate]) VALUES (297, 8010, '20050901 00:00:00.000') When it comes to rolling back database changes, ApexSQL Log has a big advantage, as it rolls back only specific transactions, while leaving all other transactions that occurred at the same time range intact. That makes ApexSQL Log a good solution for rolling back inadvertent data and schema changes on your SQL Server databases. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL Tagged: ApexSQL

  Read the article

• What C++ coding standard do you use?

  - by gablin

  For some time now, I've been unable to settle on a coding standard and use it concistently between projects. When starting a new project, I tend to change some things around (add a space there, remove a space there, add a line break there, an extra indent there, change naming conventions, etc.). So I figured that I might provide a piece of sample code, in C++, and ask you to rewrite it to fit your standard of coding. Inspiration is always good, I say. ^^ So here goes: #ifndef _DERIVED_CLASS_H__ #define _DERIVED_CLASS_H__ /** * This is an example file used for sampling code layout. * * @author Firstname Surname */ #include <stdio> #include <string> #include <list> #include "BaseClass.h" #include "Stuff.h" /** * The DerivedClass is completely useless. It represents uselessness in all its * entirety. */ class DerivedClass : public BaseClass { //////////////////////////////////////////////////////////// // CONSTRUCTORS / DESTRUCTORS //////////////////////////////////////////////////////////// public: /** * Constructs a useless object with default settings. * * @param value * Is never used. * @throws Exception * If something goes awry. */ DerivedClass (const int value) : uselessSize_ (0) {} /** * Constructs a copy of a given useless object. * * @param object * Object to copy. * @throws OutOfMemoryException * If necessary data cannot be allocated. */ ItemList (const DerivedClass& object) {} /** * Destroys this useless object. */ ~ItemList (); //////////////////////////////////////////////////////////// // PUBLIC METHODS //////////////////////////////////////////////////////////// public: /** * Clones a given useless object. * * @param object * Object to copy. * @return This useless object. */ DerivedClass& operator= (const DerivedClass& object) { stuff_ = object.stuff_; uselessSize_ = object.uselessSize_; } /** * Does absolutely nothing. * * @param useless * Pointer to useless data. */ void doNothing (const int* useless) { if (useless == NULL) { return; } else { int womba = *useless; switch (womba) { case 0: cout << "This is output 0"; break; case 1: cout << "This is output 1"; break; case 2: cout << "This is output 2"; break; default: cout << "This is default output"; break; } } } /** * Does even less. */ void doEvenLess () { int mySecret = getSecret (); int gather = 0; for (int i = 0; i < mySecret; i++) { gather += 2; } } //////////////////////////////////////////////////////////// // PRIVATE METHODS //////////////////////////////////////////////////////////// private: /** * Gets the secret value of this useless object. * * @return A secret value. */ int getSecret () const { if ((RANDOM == 42) && (stuff_.size() > 0) || (1000000000000000000 > 0) && true) { return 420; } else if (RANDOM == -1) { return ((5 * 2) + (4 - 1)) / 2; } int timer = 100; bool stopThisMadness = false; while (!stopThisMadness) { do { timer--; } while (timer > 0); stopThisMadness = true; } } //////////////////////////////////////////////////////////// // FIELDS //////////////////////////////////////////////////////////// private: /** * Don't know what this is used for. */ static const int RANDOM = 42; /** * List of lists of stuff. */ std::list <Stuff> stuff_; /** * Specifies the size of this object's uselessness. */ size_t uselessSize_; }; #endif

  Read the article

• C# 5 Async, Part 2: Asynchrony Today

  - by Reed

  The .NET Framework has always supported asynchronous operations.  However, different mechanisms for supporting exist throughout the framework.  While there are at least three separate asynchronous patterns used through the framework, only the latest is directly usable with the new Visual Studio Async CTP.  Before delving into details on the new features, I will talk about existing asynchronous code, and demonstrate how to adapt it for use with the new pattern. The first asynchronous pattern used in the .NET framework was the Asynchronous Programming Model (APM).  This pattern was based around callbacks.  A method is used to start the operation.  It typically is named as BeginSomeOperation.  This method is passed a callback defined as an AsyncCallback, and returns an object that implements IAsyncResult.  Later, the IAsyncResult is used in a call to a method named EndSomeOperation, which blocks until completion and returns the value normally directly returned from the synchronous version of the operation.  Often, the EndSomeOperation call would be called from the callback function passed, which allows you to write code that never blocks. While this pattern works perfectly to prevent blocking, it can make quite confusing code, and be difficult to implement.  For example, the sample code provided for FileStream’s BeginRead/EndRead methods is not simple to understand.  In addition, implementing your own asynchronous methods requires creating an entire class just to implement the IAsyncResult. Given the complexity of the APM, other options have been introduced in later versions of the framework.  The next major pattern introduced was the Event-based Asynchronous Pattern (EAP).  This provides a simpler pattern for asynchronous operations.  It works by providing a method typically named SomeOperationAsync, which signals its completion via an event typically named SomeOperationCompleted. The EAP provides a simpler model for asynchronous programming.  It is much easier to understand and use, and far simpler to implement.  Instead of requiring a custom class and callbacks, the standard event mechanism in C# is used directly.  For example, the WebClient class uses this extensively.  A method is used, such as DownloadDataAsync, and the results are returned via the DownloadDataCompleted event. While the EAP is far simpler to understand and use than the APM, it is still not ideal.  By separating your code into method calls and event handlers, the logic of your program gets more complex.  It also typically loses the ability to block until the result is received, which is often useful.  Blocking often requires writing the code to block by hand, which is error prone and adds complexity. As a result, .NET 4 introduced a third major pattern for asynchronous programming.  The Task<T> class introduced a new, simpler concept for asynchrony.  Task and Task<T> effectively represent an operation that will complete at some point in the future.  This is a perfect model for thinking about asynchronous code, and is the preferred model for all new code going forward.  Task and Task<T> provide all of the advantages of both the APM and the EAP models – you have the ability to block on results (via Task.Wait() or Task<T>.Result), and you can stay completely asynchronous via the use of Task Continuations.  In addition, the Task class provides a new model for task composition and error and cancelation handling.  This is a far superior option to the previous asynchronous patterns. The Visual Studio Async CTP extends the Task based asynchronous model, allowing it to be used in a much simpler manner.  However, it requires the use of Task and Task<T> for all operations.

  Read the article

• 45 minutes to talk about C# [closed]

  - by Philip

  I have the opportunity to give a 45 minute talk on C# in the theory of programming languages class I'm taking. The college teaches Java almost exclusively, so that's what all the students are most familiar with. (There's a little C, assembly, Prolog and LISP as well.) I decide what to talk about. It seems to me the best approach is to focus on a few of the big, obvious differences between C# and Java. I don't intend it to be a recommendation to use C# -- there are reasons to use each, mostly because of their ecosystems. So I want to focus on C# as a language. I don't want to go too fast and end up listing a whole bunch of features without showing their usefulness. My current plan is this: Functions as first class objects. This is, in my opinion, one of the biggest differences between C# and Java. The professor briefly mentioned this notion and showed a LISP example, but many of the students have probably never used it. I can show real world examples where it's made my code more readable. Lambda expressions as concise syntax for anonymous functions. Obviously with examples to show how this is useful. The real hit-home examples will be at the end when it's combined with the rest. I don't see an advantage to first showing the old delegate syntax and then replacing it with lambdas -- most of us won't have ever seen delegates anyway so it would just be confusing. The yield keyword and how it's different from returning an array. I have the impression that a lot of C# developers aren't familiar with how to use this. It will likely be very foreign to Java developers. I have some examples from my own work where it was really useful, such as iterating over a tree traversal, or iterating over neighbors in a graph where the neighbors aren't stored in memory. In both cases, doing it in Java would likely mean returning a complete list -- with yield I can stop iterating if I find what I want early on, without using memory for superfluous lists or arrays. Extension methods as a way to write implementation on interfaces. We'll all be familiar with how interfaces don't allow method implementation, and how this leads to code duplication. I'll show a specific example of this and how the extension method can solve the problem. Demonstrate how the above can be combined by implementing some simple Linq methods and using them. Where, Select, First, maybe more depending on how much time is left. Ideas on which ones might 'hit home' the best? There are other things I could talk about such as generics, value types, properties and more. I haven't yet though of good ways to incorporate these. In the case of generics and value types, the advantages might not be obvious or as relevant. Properties are obviously useful, particularly since we're taught strict JavaBeans here, but I don't know if I could integrate it with the "path to Linq" discussion above without it feeling tacked on. So I'm looking for thoughts on how to talk about C#, and what to talk about. Even minor details. I'm sure there are more experienced C# developers than me here who have good insight about what's really important in the language, and what would miss the point.

  Read the article

• Using the Script Component as a Conditional Split

  This is a quick walk through on how you can use the Script Component to perform Conditional Split like behaviour, splitting your data across multiple outputs. We will use C# code to decide what does flows to which output, rather than the expression syntax of the Conditional Split transformation. Start by setting up the source. For my example the source is a list of SQL objects from sys.objects, just a quick way to get some data: SELECT type, name FROM sys.objects type name S syssoftobjrefs F FK_Message_Page U Conference IT queue_messages_23007163 Shown above is a small sample of the data you could expect to see. Once you have setup your source, add the Script Component, selecting Transformation when prompted for the type, and connect it up to the source. Now open the component, but don’t dive into the script just yet. First we need to select some columns. Select the Input Columns page and then select the columns we want to uses as part of our filter logic. You don’t need to choose columns that you may want later, this is just the columns used in the script itself. Next we need to add our outputs. Select the Inputs and Outputs page.You get one by default, but we need to add some more, it wouldn’t be much of a split otherwise. For this example we’ll add just one more. Click the Add Output button, and you’ll see a new output is added. Now we need to set some properties, so make sure our new Output 1 is selected. In the properties grid change the SynchronousInputID property to be our input Input 0, and  change the ExclusionGroup property to 1. Now select Ouput 0 and change the ExclusionGroup property to 2. This value itself isn’t important, provided each output has a different value other than zero. By setting this property on both outputs it allows us to split the data down one or the other, making each exclusive. If we left it to 0, that output would get all the rows. It can be a useful feature allowing you to copy selected rows to one output whilst retraining the full set of data in the other. Now we can go back to the Script page and start writing some code. For the example we will do a very simple test, if the value of the type column is U, for user table, then it goes down the first output, otherwise it ends up in the other. This mimics the exclusive behaviour of the conditional split transformation. public override void Input0_ProcessInputRow(Input0Buffer Row) { // Filter all user tables to the first output, // the remaining objects down the other if (Row.type.Trim() == "U") { Row.DirectRowToOutput0(); } else { Row.DirectRowToOutput1(); } } The code itself is very simple, a basic if clause that determines which of the DirectRowToOutput methods we call, there is one for each output. Of course you could write a lot more code to implement some very complex logic, but the final direction is still just a method call. If we now close the script component, we can hook up the outputs and test the package. Your numbers will vary depending on the sample database but as you can see we have clearly split out input data into two outputs. As a final tip, when adding the outputs I would normally rename them, changing the Name in the Properties grid. This means the generated methods follow the pattern as do the path label shown on the design surface, making everything that much easier to recognise.

  Read the article

• Opening a new Windows from ASP.NET code behind

  - by TATWORTH

  At http://weblogs.asp.net/infinitiesloop/archive/2007/09/25/response-redirect-into-a-new-window-with-extension-methods.aspx there is an excellent post on how to open a new windows from code behind. The purists may not like it but it helped solve a problem for a client's client. Here is an update for VS2010 users: using System; using System.Web; using System.Web.UI; /// <summary> /// Response Helper for opening popup windo from code behind. /// </summary> public static class ResponseHelper {   /// <summary>   /// Redirect to popup window   /// </summary>   /// <param name="response">The response.</param>   /// <param name="url">URL to open to</param>   /// <param name="target">Target of window _self or _blank</param>   /// <param name="windowFeatures">Features such as window bar</param>   /// <remarks>   ///     <list type="bullet">   ///         <item>   /// From http://weblogs.asp.net/infinitiesloop/archive/2007/09/25/response-redirect-into-a-new-window-with-extension-methods.aspx   /// </item>   /// <item>   /// Note: If you use it outside the context of a Page request, you can't redirect to a new window. The reason is the need to call the ResolveClientUrl method on Page, which I can't do if there is no Page. I could have just built my own version of that method, but it's more involved than you might think to do it right. So if you need to use this from an HttpHandler other than a Page, you are on your own.   /// </item>   ///         <item>   /// Beware of popup blockers.   /// </item>   /// <item>   /// Note: Obviously when you are redirecting to a new window, the current window will still be hanging around. Normally redirects abort the current request -- no further processing occurs. But for these redirects, processing continues, since we still have to serve the response for the current window (which also happens to contain the script to open the new window, so it is important that it completes).   /// </item>   /// <item>   /// Sample call Response.Redirect("popup.aspx", "_blank", "menubar=0,width=100,height=100");   /// </item>   ///     </list>   /// </remarks>   public static void Redirect(this HttpResponse response, string url, string target, string windowFeatures)   {     if ((String.IsNullOrEmpty(target) || target.Equals("_self", StringComparison.OrdinalIgnoreCase)) && String.IsNullOrEmpty(windowFeatures))     {       response.Redirect(url);     }     else     {       Page page = (Page)HttpContext.Current.Handler;       if (page == null)       {         throw new InvalidOperationException("Cannot redirect to new window outside Page context.");       }       url = page.ResolveClientUrl(url);       string script;       if (!String.IsNullOrEmpty(windowFeatures))       {         script = @"window.open(""{0}"", ""{1}"", ""{2}"");";       }       else       {         script = @"window.open(""{0}"", ""{1}"");";       }       script = String.Format(script, url, target, windowFeatures);       ScriptManager.RegisterStartupScript(page, typeof(Page), "Redirect", script, true);     }   } }

  Read the article

• Security and the Mobile Workforce

  - by tobyehatch

  Now that many organizations are moving to the BYOD philosophy (bring your own devices), security for phones and tablets accessing company sensitive information is of paramount importance. I had the pleasure to interview Brian MacDonald, Principal Product Manager for Oracle Business Intelligence (BI) Mobile Products, about this subject, and he shared some wonderful insight about how the Oracle Mobile Security Tool Kit is addressing mobile security and doing some pretty cool things.  With the rapid proliferation of phones and tablets, there is a perception that mobile devices are a security threat to corporate IT, that mobile operating systems are not secure, and that there are simply too many ways to inadvertently provide access to critical analytic data outside the firewall. Every day, I see employees working on mobile devices at the airport, while waiting for their airplanes, and using public WIFI connections at coffee houses and in restaurants. These methods are not typically secure ways to access confidential company data. I asked Brian to explain why. “The native controls for mobile devices and applications are indeed insufficiently secure for corporate deployments of Business Intelligence and most certainly for businesses where data is extremely critical - such as financial services or defense - although it really applies across the board. The traditional approach for accessing data from outside a firewall is using a VPN connection which is not a viable solution for mobile. The problem is that once you open up a VPN connection on your phone or tablet, you are creating an opening for the whole device, for all the software and installed applications. Often the VPN connection by itself provides insufficient encryption – if any – which means that data can be potentially intercepted.” For this reason, most organizations that deploy Business Intelligence data via mobile devices will only do so with some additional level of control. So, how has the industry responded? What are companies doing to address this very real threat? Brian explained that “Mobile Device Management (MDM) and Mobile Application Management (MAM) software vendors have rapidly created solutions for mobile devices that provide a vast array of services for controlling, managing and establishing enterprise mobile usage policies. On the device front, vendors now support full levels of encryption behind the firewall, encrypted local data storage, credential management such as federated single-sign-on as well as remote wipe, geo-fencing and other risk reducing features (should a device be lost or stolen). More importantly, these software vendors have created methods for providing these capabilities on a per application basis, allowing for complete isolation of the application from the mobile operating system. Finally, there are tools which allow the applications themselves to be distributed through enterprise application stores allowing IT organizations to manage who has access to the apps, when updates to the applications will happen, and revoke access after an employee leaves. So even though an employee may be using a personal device, access to company data can be controlled while on or near the company premises. So do the Oracle BI mobile products integrate with the MDM and MAM vendors? Brian explained that our customers use a wide variety of mobile security vendors and may even have more than one in-house. Therefore, Oracle is ensuring that users have a choice and a mechanism for linking together Oracle’s BI offering with their chosen vendor’s secure technology. The Oracle BI Mobile Security Toolkit, which is a version of the Oracle BI Mobile HD application, delivered through the Oracle Technology Network (OTN) in its component parts, helps Oracle users to build their own version of the Mobile HD application, sign it with their own enterprise development certificates, link with their security vendor of choice, then deploy the combined application through whichever means they feel most appropriate, including enterprise application stores.  Brian further explained that Oracle currently supports most of the major mobile security vendors, has close relationships with each, and maintains strong partnerships enabling both Oracle and the vendors to test, update and release a cooperating solution in lock-step. Oracle also ensures that as new versions of the Oracle HD application are made available on the Apple iTunes store, the same version is also immediately made available through the Security Toolkit on OTN.  Rest assured that as our workforce continues down the mobile path, company sensitive information can be secured.  To listen to the entire podcast, click here. To learn more about the Oracle BI Mobile HD, click  here To learn more about the BI Mobile Security Toolkit, click here 

  Read the article

• How to use DI and DI containers

  - by Pinetree

  I am building a small PHP mvc framework (yes, yet another one), mostly for learning purposes, and I am trying to do it the right way, so I'd like to use a DI container, but I am not asking which one to use but rather how to use one. Without going into too much detail, the mvc is divided into modules which have controllers which render views for actions. This is how a request is processed: a Main object instantiates a Request object, and a Router, and injects the Request into the Router to figure out which module was called. then it instantiates the Module object and sends the Request to that the Module creates a ModuleRouter and sends the Request to figure out the controller and action it then creates the Controller and the ViewRenderer, and injects the ViewRenderer into the Controller (so that the controller can send data to the view) the ViewRenderer needs to know which module, controller and action were called to figure out the path to the view scripts, so the Module has to figure out this and inject it to the ViewRenderer the Module then calls the action method on the controller and calls the render method on the ViewRenderer For now, I do not have any DI container set up, but what I do have are a bunch of initX() methods that create the required component if it is not already there. For instance, the Module has the initViewRenderer() method. These init methods get called right before that component is needed, not before, and if the component was already set it will not initialize it. This allows for the components to be switched, but it does not require manually setting them if they are not there. Now, I'd like to do this by implementing a DI container, but still keep the manual configuration to a bare minimum, so if the directory structure and naming convention is followed, everything should work, without even touching the config. If I use the DI container, do I then inject it into everything (the container would inject itself when creating a component), so that other components can use it? When do I register components with the DI? Can a component register other components with the DI during run-time? Do I create a 'common' config and use that? How do I then figure out on the fly which components I need and how they need to be set up? If Main uses Router which uses Request, Main then needs to use the container to get Module (or does the module need to be found and set beforehand? How?) Module uses Router but needs to figure out the settings for the ViewRenderer and the Controller on the fly, not in advance, so my DI container can't be setting those on the Module before the module figures out the controller and action... What if the controller needs some other service? Do I inject the container into every controller? If I start doing that, I might just inject it into everything... Basically I am looking for the best practices when dealing with stuff like this. I know what DI is and what DI containers do, but I am looking for guidance to using them in real life, and not some isolated examples on the net. Sorry for the lengthy post and many thanks in advance.

  Read the article

• Why is there no service-oriented language?

  - by Wolfgang

  Edit: To avoid further confusion: I am not talking about web services and such. I am talking about structuring applications internally, it's not about how computers communicate. It's about programming languages, compilers and how the imperative programming paradigm is extended. Original: In the imperative programming field, we saw two paradigms in the past 20 years (or more): object-oriented (OO), and service-oriented (SO) aka. component-based (CB). Both paradigms extend the imperative programming paradigm by introducing their own notion of modules. OO calls them objects (and classes) and lets them encapsulates both data (fields) and procedures (methods) together. SO, in contrast, separates data (records, beans, ...) from code (components, services). However, only OO has programming languages which natively support its paradigm: Smalltalk, C++, Java and all other JVM-compatibles, C# and all other .NET-compatibles, Python etc. SO has no such native language. It only comes into existence on top of procedural languages or OO languages: COM/DCOM (binary, C, C++), CORBA, EJB, Spring, Guice (all Java), ... These SO frameworks clearly suffer from the missing native language support of their concepts. They start using OO classes to represent services and records. This leads to designs where there is a clear distinction between classes that have methods only (services) and those that have fields only (records). Inheritance between services or records is then simulated by inheritance of classes. Technically, its not kept so strictly but in general programmers are adviced to make classes to play only one of the two roles. They use additional, external languages to represent the missing parts: IDL's, XML configurations, Annotations in Java code, or even embedded DSL like in Guice. This is especially needed, but not limited to, since the composition of services is not part of the service code itself. In OO, objects create other objects so there is no need for such facilities but for SO there is because services don't instantiate or configure other services. They establish an inner-platform effect on top of OO (early EJB, CORBA) where the programmer has to write all the code that is needed to "drive" SO. Classes represent only a part of the nature of a service and lots of classes have to be written to form a service together. All that boiler plate is necessary because there is no SO compiler which would do it for the programmer. This is just like some people did it in C for OO when there was no C++. You just pass the record which holds the data of the object as a first parameter to the procedure which is the method. In a OO language this parameter is implicit and the compiler produces all the code that we need for virtual functions etc. For SO, this is clearly missing. Especially the newer frameworks extensively use AOP or introspection to add the missing parts to a OO language. This doesn't bring the necessary language expressiveness but avoids the boiler platform code described in the previous point. Some frameworks use code generation to produce the boiler plate code. Configuration files in XML or annotations in OO code is the source of information for this. Not all of the phenomena that I mentioned above can be attributed to SO but I hope it clearly shows that there is a need for a SO language. Since this paradigm is so popular: why isn't there one? Or maybe there are some academic ones but at least the industry doesn't use one.

  Read the article

• How to deploy global managed beans

  - by frank.nimphius

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} "Global managed" beans is the term I use in this post to describe beans that are used across applications. Global managed beans contain helper - or utility - methods like or instead of JSFUtils and ADFUtils. The difference between global managed beans and static helper classes like JSFUtis and ADFUtils is that they are EL accessible, providing reusable functionality that is ready to use on UI components and - if accessed from Java - in other managed beans. For example, the ADF Faces page template (af:pageTemplate) allows you to define attributes for the consuming page to pass in object references or strings into it. It does not have method attributes that allow command components contained in a template to invoke listeners in managed beans and the ADF binding layer, or to execute actions. To create templates that provide global button or menu functionality, like logon, logout, print etc., an option for developers is to deployed managed beans with the ADF Faces page templates. To deploy a managed bean with a page template, create an ADF library from the project containing the template definition and import this ADF library into the target project using the Resource palette. When importing an ADF library, all its content is added to the project, including page template definitions, managed bean sources and configurations. More about page templates http://download.oracle.com/docs/cd/E17904_01/apirefs.1111/e12419/tagdoc/af_pageTemplate.html Another use-case for globally configured managed beans is for creating helper methods to be used in many applications. Instead of creating a base managed bean class that then is extended by all managed beans used in applications, you can deploy a managed bean in a JAR file and add the faces-config.xml file with the managed bean configuration to the JAR's META-INF folder as shown below. Using a globally configured managed bean allows you to use Expression Language in the UI to access common functionality but also use Java in application specific managed beans. Storing the faces-config.xml file in the JAR file META-INF directory automatically makes it available when the JAR file is found in the class path of an application.

  Read the article

• Refactoring existing PHP Project. I need some advices

  - by b0x

  i have a small SAS ERP that was written some years ago using PHP. At that time, it didn't used any framework, but the code isn't a mess as i will explain more detailed in the following lines. Nowadays, the project grow and I’m now working with 3 more programmers. Often, they ask to me why we don’t migrate to a framework such Laravel. Although I'd love trying Laravel, I’m a small business and i don't have time/money to stop and spend a whole year building everything from scratch. I need to live and pay the bills. So, I've read a lot about this matter, and I decided that doing a refactoring is the best way to do it. Also, I'm not so sure that a framework will make things easy. Business goals are: Make the code easier to new hired programmers I must separate the "view", because: I want to release different versions of this product (using the same code), but under different brands and websites at the minimum cost (just changing view) Release different versions to fit mobile/tablet. Make different types of this product, seeling packages as if it were plugins. Develop custom packages for some costumers (like plugins/addon's that they can buy to put on the main application). Code goals: Introduce best pratices, standards for everyone Try to build my own MVC structure Improve validation of data/forms (today they are mixed in both ajax and classes) Create automated testing rotines, to quality assurance. My actual structure project: class\ extra\ hd\ logs\ public_html\ public_html\includes\ public_html\css|js|images\ class\ There are three types of classes. They are all “autoloaded” with something similar with PSR-0, but I don’t use namespaces. 1. class.Something.php Connects to Database using specific methods. I.e: Costumer-list(); It uses “class.Db.php”, that it’s an abstraction of mysqli on every method. 2. class.SomethingProc.php Do things that “join” things that come from “class.Something.php”. Like IF/ELSE, math operations. 3. class.SomethingHTML.php The classes with “HTML” suffix implements only static methods and HTML code only. A real life example: All the programmers need to use $cSomething ($c to class) and $arrSomething (to array). Costumer.php (view) <?php $cCosumter = new Costumer(); $arrCostumer = $cCostumer->list(); echo CostumerHTML::table($arrCostumer); ?> Extra\ Store 3rdparty projects/classes from others, such MPDF, PHPMailer, etc. Hd\ Store user’s fies outsite wwwroot dir. Logs\ Store phplogs and the system itself logs (We have a static Log::error() method, that we put in every method of every class) Public_html\ Stores the files that people use. Public_html\includes\ Store the main “config.php” file and all files that do “ajax things” ajax.Costumer.php, for example. Help is needed ;) So, as you can see we have some standards, and also for database things. But i want to write a manual of our rules. Something that i can give to any new programmer at my companie and he can go on. This is not totally a mess, but It could be better seeing the new practices. What could I do to separate this as MVC, to have multiple VIEW’s. Could you gimme some tips considering my goals? Keep im mind the different products/custom things for specific costumers without breaking the main application. URL for tutorials, books, etc. It would be nice. Thanks!

  Read the article

• Advice on refactoring PHP Project

  - by b0x

  I have a small SAS ERP that was written some years ago using PHP. At that time, it didn't use any framework, but the code isn't a mess. Nowadays, the project grows and I’m now working with 3 more programmers. Often, they ask to me why we don’t migrate to a framework such as Laravel. Although I'd love trying Laravel, I’m a small business and I don't have time nor money to stop and spend a whole year building everything from scratch. I need to live and pay the bills. So, I've read a lot about this matter, and I decided that doing a refactoring is the best way to do it. Also, I'm not so sure that a framework will make things easy. Business goals are: Make the code easier to new hired programmers Separate the "view", in order to: release different versions of this product (using the same code), but under different brands and websites at the minimum cost (just changing view) release different versions to fit mobile/tablet. Make different types of this product, selling packages as if they were plugins. Develop custom packages for some costumers (like plugins/addon's that they can buy to put on the main application). Code goals: Introduce best pratices, standards for everyone Try to build my own MVC structure Improve validation of data/forms (today they are mixed in both ajax and classes) Create automated testing routines for quality assurance. My current structure project: class\ extra\ hd\ logs\ public_html\ public_html\includes\ public_html\css|js|images\ class\ There are three types of classes. They are all “autoloaded” with something similar with PSR-0, but I don’t use namespaces. 1. class.Something.php Connects to Database using specific methods. I.e: Costumer-list(); It uses “class.Db.php”, that it’s an abstraction of mysql on every method. 2. class.SomethingProc.php Do things that “join” things that come from “class.Something.php”. Like IF/ELSE, math operations. 3. class.SomethingHTML.php The classes with “HTML” suffix implements only static methods and HTML code only. A real life example: All the programmers need to use $cSomething ($c to class) and $arrSomething (to array). Costumer.php (view) <?php $cCosumter = new Costumer(); $arrCostumer = $cCostumer->list(); echo CostumerHTML::table($arrCostumer); ?> Extra\ Store 3rdparty projects/classes from others, such MPDF, PHPMailer, etc. Hd\ Store user’s files outsite wwwroot dir. Logs\ Store phplogs and the system itself logs (We have a static Log::error() method, that we put in every method of every class) Public_html\ Stores the files that people use. Public_html\includes\ Store the main “config.php” file and all files that do “ajax things” ajax.Costumer.php, for example. Help is needed ;) So, as you can see we have some standards, and also for database things. But I want to write a manual of our rules. Something that I can give to any new programmer at my company and he can go on. This is not totally a mess, but it could be better seeing the new practices. What could I do to separate this as MVC, to have multiple views. Could you give me some tips considering my goals? Keep im mind the different products/custom things for specific costumers without breaking the main application. URL for tutorials, books, etc, would be nice.

  Read the article

• Introduction to WebCenter Personalization: &ldquo;The Conductor&rdquo;

  - by Steve Pepper

  There are some new faces in the town of WebCenter with the latest 11g PS3 release.  A new component has introduced itself as "Oracle WebCenter Personalization", a.k.a WCP, to simplify delivery of a personalized experience and content to end users.  This posting reviews one of the primary components within WCP: "The Conductor". The Conductor: This ain't just an ordinary cloud... One of the founding principals behind WebCenter Personalization was to provide an open client-side API that remains independent of the technology invoking it, in addition to independence from the architecture running it.  The Conductor delivers this, and much, much more. The Conductor is the engine behind WebCenter Personalization that allows flow-based documents, called "Scenarios", to be managed and executed on the server-side through a well published and RESTful api.      The Conductor also supports an extensible model for custom provider integration that can be easily invoked within a Scenario to promote seamless integration with existing business assets. Introducing the Scenario Conductor Scenarios are declarative offline-authored documents using the custom Personalization JDeveloper bundle included with WebCenter.  A Scenario contains one (or more) statements that can: Create variables that are scoped to the current execution context Iterate over collections, or loop until a specific condition is met Execute one or more statements when a condition is met Invoke other scenarios that exist within the same namespace Invoke a data provider that integrates with custom applications Once a variable is assigned within the Scenario's execution context, it can be referenced anywhere within the same Scenario using the common Expression Language syntax used in J2EE web containers. Scenarios are then published and tested to the Integrated WebLogic Server domain, or published remotely to other domains running WebCenter Personalization. Various Client-side Models The Conductor server API is built upon RESTful services that support a wide variety of clients able to communicate over HTTP.  The Conductor supports the following client-side models: REST:  Popular browser-based languages can be used to manage and execute Conductor Scenarios.  There are other public methods to retrieve configured provider metadata that can be used by custom applications. The Conductor currently supports XML and JSON for it's API syntax. Java: WebCenter Personalization delivers a robust and light-weight java client with the popular Jersey framework as it's foundation.  It has never been easier to write a remote java client to manage remote RESTful services. Expression Language (EL): Allow the results of Scenario execution to control your user interface or embed personalized content using the session-scoped managed bean.  The EL client can also be used in straight JSP pages with minimal configuration. Extensible Provider Framework The Conductor supports a pluggable provider framework for integrating custom code with Scenario execution.  There are two types of providers supported by the Conductor: Function Provider: Function Providers are simple java annotated classes with static methods that are meant to be served as utilities.  Some common uses would include: object creation or instantiation, data transformation, and the like.  Function Providers can be invoked using the common EL syntax from variable assignments, conditions, and loops. For example:  ${myUtilityClass:doStuff(arg1,arg2))} If you are familiar with EL Functions, Function Providers are based on the same concept. Data Provider: Like Function Providers, Data Providers are annotated java classes, but they must adhere to a much more strict object model.  Data Providers have access to a wealth of Conductor services, such as: Access to namespace-scoped configuration API that can be managed by Oracle Enterprise Manager, Scenario execution context for expression resolution, and more.  Oracle ships with three out-of-the-box data providers that supports integration with: Standardized Content Servers(CMIS),  Federated Profile Properties through the Properties Service, and WebCenter Activity Graph. Useful References If you are looking to immediately get started writing your own application using WebCenter Personalization Services, you will find the following references helpful in getting you on your way: Personalizing WebCenter Applications Authoring Personalized Scenarios in JDeveloper Using Personalization APIs Externally Implementing and Calling Function Providers Implementing and Calling Data Providers

  Read the article

• My architecture has a problem with views that required information from different objects. How can I solve this?

  - by Oscar

  I am building an architecture like this: These are my SW layers ______________ | | | Views | |______________| ______________ | | |Business Logic| |______________| ______________ | | | Repository | |______________| My views are going to generate my HTML to be sent to the user Business logic is where all the business logics are Repository is a layer to access the DB My idea is that the repository uses entities (that are basically the representation of the tables, in order to perform DB queries. The layers communicate between themselves using Business Objects, that are objects that represent the real-world-object itself. They can contain business rules and methods. The views build/use DTOs, they are basically objects that have the information required to be shown on the screen. They expect also this kind of object on actions and, before calling the business logic, they create BO. First question: what is your overall feeling about this architecture? I've used similar architecture for some projects and I always got this problem: If my view has this list to show : Student1, age, course, Date Enrolled, Already paid? It has information from different BO. How do you think one should build the structure? These were the alternatives I could think of: The view layer could call the methods to get the student, then the course it studies, then the payment information. This would cause a lot of DB accesses and my view would have the knowledge about how to act to generate this information. This just seems wrong for me. I could have an "adapter object", that has the required information (a class that would have a properties Student, Course and Payment). But I would required one adapter object for each similar case, this may get very bad for big projects. I still don't like them. Would you have ideas? How would you change the architecture to avoid this kind of problems? @Rory: I read the CQRS and I don't think this suits my needs. As taken from a link references in your link Before describing the details of CQRS we need to understand the two main driving forces behind it: collaboration and staleness That means: many different actors using the same object (collaboration) and once data has been shown to a user, that same data may have been changed by another actor – it is stale (staleness). My problem is that I want to show to the user information from different BO, so I would need to receive them from the service layer. How can my service layer assemble and deliver this information? Edit to @AndrewM: Yes, you understood it correctly, the original idea was to have the view layer to build the BOs, but you have a very nice point about the creation of the BO inside the business layers. Assuming I follow your advice and move the creation logic inside the business layer, my business layer interface would contain the DTOs, for instance public void foo(MyDTO object) But as far as I understand, the DTO is tightly coupled to each view, so it would not be reusable by a second view. In order to use it, the second view would need to build a specific DTO from a specific view or I would have to duplicate the code in the business layer. Is this correct or am I missing something?

  Read the article

• ReSharper 8.0 EAP now available

  - by TATWORTH

  Originally posted on: http://geekswithblogs.net/TATWORTH/archive/2013/06/28/resharper-8.0-eap-now-available.aspxJetbrains have just released |ReSharper 8.0 Beta on their Early Access |Programme at http://www.jetbrains.com/resharper/whatsnew/?utm_source=resharper8b&utm_medium=newsletter&utm_campaign=resharper&utm_content=customersResharper 8.0 comes with the following new features:Support for Visual Studio 2013 Preview. Yes, ReSharper is known to work well with the fresh preview of Visual Studio 2013, and if you have already started digging into it, ReSharper 8.0 Beta is ready for the challenge.Faster code fixes. Thanks to the new Fix in Scope feature, you can choose to batch-fix some of the code issues that ReSharper detects in the scope of a project or the whole solution. Supported fixes include removing unused directives and redundant casts.Project dependency viewer. ReSharper is now able to visualize a project dependency graph for a bird's eye view of dependencies within your solution, all without compiling anything!Multifile templates. ReSharper's file templates can now be expanded to generate more than one file. For instance, this is handy for generating pairs of a main logic class and a class for extensions, or sets of partial files.Navigation improvements. These include a new action called Go to Everything to let you search for a file, type or method name from the same input box; support for line numbers in navigation actions; a new tool window called Assembly Explorer for browsing through assemblies; and two more contextual navigation actions: Navigate to Generic Substitutions and Navigate to Assembly Explorer.New solution-wide refactorings. The set of fresh refactorings is headlined by the highly requested Move Instance Method to move methods between classes without making them static. In addition, there are Inline Parameter and Pull Parameter. Last but not least, we're also introducing 4 new XAML-specific refactorings!Extraordinary XAML support. A plethora of new and improved functionality for all developers working with XAML code includes dedicated grid inspections and quick-fixes; Extract Style, Extract, Move and Inline Resource refactorings; atomic renaming of dependency properties; and a lot more.More accessible code completion. ReSharper 8 makes more of its IntelliSense magic available in automatic completion lists, including extension methods and an option to import a type. We're also introducing double completion which gives you additional completion items when you press the corresponding shortcut for the second time.A new level of extensibility. With the new NuGet-based Extension Manager, discovering, installing and uninstalling ReSharper extensions becomes extremely easy in Visual Studio 2010 and higher. When we say extensions, we mean not only full-fledged plug-ins but also sets of templates or SSR patterns that can now be shared much more easily.CSS support improvements. Smarter usage search for CSS attributes, new CSS-specific code inspections, configurable support for CSS3 and earlier versions, compatibility checks against popular browsers - there's a rough outline of what's new for CSS in ReSharper 8.A command-line version of ReSharper. ReSharper 8 goes beyond Visual Studio: we now provide a free standalone tool with hundreds of ReSharper inspections and additionally a duplicate code finder that you can integrate with your CI server or version control system.Multiple minor improvements in areas such as decompiling and code formatting, as well as support for the Blue Theme introduced in Visual Studio 2012 Update 2.

  Read the article

• Is this Hybrid of Interface / Composition kosher?

  - by paul

  I'm working on a project in which I'm considering using a hybrid of interfaces and composition as a single thing. What I mean by this is having a contain*ee* class be used as a front for functionality implemented in a contain*er* class, where the container exposes the containee as a public property. Example (pseudocode): class Visibility(lambda doShow, lambda doHide, lambda isVisible) public method Show() {...} public method Hide() {...} public property IsVisible public event Shown public event Hidden class SomeClassWithVisibility private member visibility = new Visibility(doShow, doHide, isVisible) public property Visibility with get() = visibility private method doShow() {...} private method doHide() {...} private method isVisible() {...} There are three reasons I'm considering this: The language in which I'm working (F#) has some annoyances w.r.t. implementing interfaces the way I need to (unless I'm missing something) and this will help avoid a lot of boilerplate code. The containee classes could really be considered properties of the container class(es); i.e. there seems to be a fairly strong has-a relationship. The containee classes will likely implement code which would have been pretty much the same when implemented in all the container classes, so why not do it once in one place? In the above example, this would include managing and emitting the Shown/Hidden events. Does anyone see any isseus with this Composiface/Intersition method, or know of a better way? EDIT 2012.07.26 - It seems a little background information is warranted: Where I work, we have a bunch of application front-ends that have limited access to system resources -- they need access to these resources to fully function. To remedy this we have a back-end application that can access the needed resources, with which the front-ends can communicate. (There is an API written for the front-ends for accessing back-end functionality as though it were part of the front-end.) The back-end program is out of date and its functionality is incomplete. It has made the transition from company to company a couple of times and we can't even compile it anymore. So I'm trying to rewrite it in my spare time. I'm trying to update things to make a nice(r) interface/API for the front-ends (while allowing for backwards compatibility with older front-ends), hopefully something full of OOPy goodness. The thing is, I don't want to write the front-end API after I've written pretty much the same code in F# for implementing the back-end; so, what I'm planning on doing is applying attributes to classes/methods/properties that I would like to have code for in the API then generate this code from the F# assembly using reflection. The method outlined in this question is a possible alternative I'm considering instead of implementing straight interfaces on the classes in F# because they're kind of a bear: In order to access something of an interface that has been implemented in a class, you have to explicitly cast an instance of that class to the interface type. This would make things painful when getting calls from the front-ends. If you don't want to have to do this, you have to call out all of the interface's methods/properties again in the class, outside of the interface implementation (which is separate from regular class members), and call the implementation's members. This is basically repeating the same code, which is what I'm trying to avoid!

  Read the article

• Where should instantiated classes be stored?

  - by Eric C.

  I'm having a bit of a design dilemma here. I'm writing a library that consists of a bunch of template classes that are designed to be used as a base for creating content. For example: public class Template { public string Name {get; set;} public string Description {get; set;} public string Attribute1 {get; set;} public string Attribute2 {get; set;} public Template() { //constructor } public void DoSomething() { //does something } ... } The problem is, not only is the library providing the templates, it will also supply quite a few predefined templates which are instances of these template classes. The question is, where do I put these instances of the templates? The three solutions I've come up with so far are: 1) Provide serialized instances of the templates as files. On the one hand, this solution would keep the instances separated from the library itself, which is nice, but it would also potentially add complexity for the user. Even if we provided methods for loading/deserializing the files, they'd still have to deal with a bunch of files, and some kind of config file so the app knows where to look for those files. Plus, creating the template files would probably require a separate app, so if the user wanted to stick with the files method of storing templates, we'd have to provide some kind of app for creating the template files. Also, this requires external dependencies for testing the templates in the user's code. 2) Add readonly instances to the template class Example: public class Template { public string Name {get; set;} public string Description {get; set;} public string Attribute1 {get; set;} public string Attribute2 {get; set;} public Template PredefinedTemplate { get { Template templateInstance = new Template(); templateInstance.Name = "Some Name"; templateInstance.Description = "A description"; ... return templateInstance; } } public Template() { //constructor } public void DoSomething() { //does something } ... } This method would be convenient for users, as they would be able to access the predefined templates in code directly, and would be able to unit test code that used them. The drawback here is that the predefined templates pollute the Template type namespace with a bunch of extra stuff. I suppose I could put the predefined templates in a different namespace to get around this drawback. The only other problem with this approach is that I'd have to basically duplicate all the namespaces in the library in the predefined namespace (e.g. Templates.SubTemplates and Predefined.Templates.SubTemplates) which would be a pain, and would also make refactoring more difficult. 3) Make the templates abstract classes and make the predefined templates inherit from those classes. For example: public abstract class Template { public string Name {get; set;} public string Description {get; set;} public string Attribute1 {get; set;} public string Attribute2 {get; set;} public Template() { //constructor } public void DoSomething() { //does something } ... } and public class PredefinedTemplate : Template { public PredefinedTemplate() { this.Name = "Some Name"; this.Description = "A description"; this.Attribute1 = "Some Value"; ... } } This solution is pretty similar to #2, but it ends up creating a lot of classes that don't really do anything (none of our predefined templates are currently overriding behavior), and don't have any methods, so I'm not sure how good a practice this is. Has anyone else had any experience with something like this? Is there a best practice of some kind, or a different/better approach that I haven't thought of? I'm kind of banging my head against a wall trying to figure out the best way to go. Thanks!

  Read the article

• Profiling Startup Of VS2012 &ndash; JustTrace Profiler

  - by Alois Kraus

  JustTrace is made by Telerik which is mainly known for its collection of UI controls. The current version (2012.3.1127.0) does include a performance and memory profiler which does cost 614€ and is currently with a special offer for 306€ on sale. It does include one year of free upgrades. The uneven € numbers are calculated from the 799€ and 50% dicsount price. The UI is already in Metro style and simple to use. Multi process, attach, method recording filter are not supported. It looks like JustTrace is like Ants a Just My Code profiler. For stuff where you do not have the pdbs or you want to dig deeper into the BCL code you will not get far. After getting the profile data you get in the All Methods grid a plain list with hit count and own time. The method list for all methods is also suspiciously short which is a clear sign that you will not get far during the analysis of foreign code. But at least there is also a memory profiler included. For this I have to choose in the first window for Profiling Type “Memory Profiler” to check the memory consumption of VS.  There are some interesting number to see but I do really miss from YourKit the thread stack window. How am I supposed to get a clue when much memory is allocated and the CPU consumption is high in which places I should look? The Snapshot summary gives a rough overview which is ok for a first impression. Next is Assemblies? This gives you a list of all loaded assemblies. Not terribly useful.   The By Type view gives you exactly what it is supposed to do. You have to keep in mind that this list is filtered by the types you did check in the Assemblies list. The By Type instance list does only show types from assemblies which do not originate from Microsoft. By default mscorlib and System are not checked. That is the reason why for the first time my By Type window looked like The idea behind this feature is to show only your instances because you are ultimately responsible for the overall memory consumption. I am not sure if I do like this feature because by default it does hide too much. I do want to see at least how many strings and arrays are allocated. A simple namespace filter would also do it in my opinion. Now you can examine all string instances and look who in the object graph does keep a reference on them. That is nice but YourKit has the big plus that you can also look into the string contents.  I am also not sure how in the graph cycles are visualized and what will happen if you have thousands of objects referencing you. That's pretty much it about JustTrace. It can help the average developer to pinpoint performance and memory issues by just looking at his own code and instances. Showing them more will not help them because the sheer amount of information will overwhelm them. And you need to have a pretty good understanding how the GC and the CLR does work. When you have a performance issue at a customer machine it is sometimes very helpful to be able a bring a profiler onto the machine (no pdbs, …) and to get a full snapshot of all processes which are in the problematic use case involved. For these more advanced use cased JustTrace is certainly the wrong tool. Next: SpeedTrace

  Read the article

• What's new in Servlet 3.1 ? - Java EE 7 moving forward

  - by arungupta

  Servlet 3.0 was released as part of Java EE 6 and made huge changes focused at ease-of-use. The idea was to leverage the latest language features such as annotations and generics and modernize how Servlets can be written. The web.xml was made as optional as possible. Servet 3.1 (JSR 340), scheduled to be part of Java EE 7, is an incremental release focusing on couple of key features and some clarifications in the specification. The main features of Servlet 3.1 are explained below: Non-blocking I/O - Servlet 3.0 allowed asynchronous request processing but only traditional I/O was permitted. This can restrict scalability of your applications. Non-blocking I/O allow to build scalable applications. TOTD #188 provide more details about how non-blocking I/O can be done using Servlet 3.1. HTTP protocol upgrade mechanism - Section 14.42 in the HTTP 1.1 specification (RFC 2616) defines an upgrade mechanism that allows to transition from HTTP 1.1 to some other, incompatible protocol. The capabilities and nature of the application-layer communication after the protocol change is entirely dependent upon the new protocol chosen. After an upgrade is negotiated between the client and the server, the subsequent requests use the new chosen protocol for message exchanges. A typical example is how WebSocket protocol is upgraded from HTTP as described in Opening Handshake section of RFC 6455. The decision to upgrade is made in Servlet.service method. This is achieved by adding a new method: HttpServletRequest.upgrade and two new interfaces: javax.servlet.http.HttpUpgradeHandler and javax.servlet.http.WebConnection. TyrusHttpUpgradeHandler shows how WebSocket protocol upgrade is done in Tyrus (Reference Implementation for Java API for WebSocket). Security enhancements Applying run-as security roles to #init and #destroy methods Session fixation attack by adding HttpServletRequest.changeSessionId and a new interface HttpSessionIdListener. You can listen for any session id changes using these methods. Default security semantic for non-specified HTTP method in <security-constraint> Clarifying the semantics if a parameter is specified in the URI and payload Miscellaneous ServletResponse.reset clears any data that exists in the buffer as well as the status code, headers. In addition, Servlet 3.1 will also clears the state of calling getServletOutputStream or getWriter. ServletResponse.setCharacterEncoding: Sets the character encoding (MIME charset) of the response being sent to the client, for example, to UTF-8. Relative protocol URL can be specified in HttpServletResponse.sendRedirect. This will allow a URL to be specified without a scheme. That means instead of specifying "http://anotherhost.com/foo/bar.jsp" as a redirect address, "//anotherhost.com/foo/bar.jsp" can be specified. In this case the scheme of the corresponding request will be used. Clarification in HttpServletRequest.getPart and .getParts without multipart configuration. Clarification that ServletContainerInitializer is independent of metadata-complete and is instantiated per web application. A complete replay of What's New in Servlet 3.1: An Overview from JavaOne 2012 can be seen here (click on CON6793_mp4_6793_001 in Media). Each feature will be added to the JSR subject to EG approval. You can share your feedback to [email protected]. Here are some more references for you: Servlet 3.1 Public Review Candidate Downloads Servlet 3.1 PR Candidate Spec Servlet 3.1 PR Candidate Javadocs Servlet Specification Project JSR Expert Group Discussion Archive Java EE 7 Specification Status Several features have already been integrated in GlassFish 4 Promoted Builds. Have you tried any of them ? Here are some other Java EE 7 primers published so far: Concurrency Utilities for Java EE (JSR 236) Collaborative Whiteboard using WebSocket in GlassFish 4 (TOTD #189) Non-blocking I/O using Servlet 3.1 (TOTD #188) What's New in EJB 3.2 ? JPA 2.1 Schema Generation (TOTD #187) WebSocket Applications using Java (JSR 356) Jersey 2 in GlassFish 4 (TOTD #182) WebSocket and Java EE 7 (TOTD #181) Java API for JSON Processing (JSR 353) JMS 2.0 Early Draft (JSR 343) And of course, more on their way! Do you want to see any particular one first ?

  Read the article

• Delegates: A Practical Understanding

  - by samerpaul

  It's been a while since I have written on this blog, and I'm planning on reviving it this summer, since I have more time to do so again.I've also recently started working on the iPhone platform, so I haven't been as busy in .NET as before.In either case, today's blog post applies to both C# and Objective-C, because it's more about a practical understanding of delegates than it is about code. When I was learning coding, I felt like delegates was one of the hardest things to conceptually understand, and a lot of books don't really do a good job (in my opinion) of explaining it. So here's my stab at it.A Real Life Example of DelegatesLet's say there are three of you. You, your friend, and your brother. You're each in a different room in your house so you can't hear each other, even if you shout. 1)You are playing a computer game2) Friend is building a puzzle3) Brother is nappingNow, you three are going to stay in your room but you want to be informed if anything interesting is happening to the one of you. Let's say you (playing the computer game) want to know when your brother wakes up.You could keep walking to the room, checking to see if he's napping, and then walking back to your room. But that would waste a lot of time / resources, and what if you miss when he's awake before he goes back to sleep? That would be bad.Instead, you hand him a 2-way radio that works between your room and his room. And you inform him that when he wakes up, he should press a button on the radio and say "I'm awake". You are going to be listening to that radio, waiting for him to say he's awake. This, in essence, is how a delegate works.You're creating an "object" (the radio) that allows you to listen in on an event you specify. You don't want him to send any other messages to you right now, except when he wakes up. And you want to know immediately when he does, so you can go over to his room and say hi. (the methods that are called when a delegate event fires). You're also currently specifying that only you are listening on his radio.Let's say you want your friend to come into the room at the same time as you, and do something else entirely, like fluff your brother's pillow. You will then give him an identical radio, that also hooks into your brother's radio, and inform him to wait and listen for the "i'm awake" signal.Then, when your brother wakes up, he says "I'm awake!" and both you and your friend walk into the room. You say hi, and your friend fluffs the pillow, then you both exit.Later, if you decide you don't care to say hi anymore, you turn off your radio. Now, you have no idea when your brother is awake or not, because you aren't listening anymore.So again, you are each classes in this example, and each of you have your own methods. You're playing a computer game (PlayComputerGame()), your friend is building a puzzle (BuildPuzzle()) and your brother is napping (Napping()). You create a delegate (ImAwake) that you set your brother to do, when he wakes up. You listen in on that delegate (giving yourself a radio and turning it on), and when you receive the message, you fire a new method called SayHi()). Your friend is also wired up to the same delegate (using an identical radio) and fires the method FluffPillow().Hopefully this makes sense, and helps shed some light on how delegates operate. Let me know! Feel free to drop me a line at Twitter (preferred method of contact) here: samerabousalbi

  Read the article

< Previous Page | 140 141 142 143 144 145 146 147 148 149 150 151  | Next Page >