Search Results

Search found 7452 results on 299 pages for 'power loss'.

Page 144/299 | < Previous Page | 140 141 142 143 144 145 146 147 148 149 150 151  | Next Page >

• linux kernel idle tick eater (or what will be current task_struct when CPU is 0%)

  - by osgx

  Hello What process will be pointed by "current" pointer in linux kernel, when CPU load is 0% and there is no any ready-to-run process? Consider situation without any power-saving. What is the name of this porcess? I think task with pid 0 will be running and code will be rep nop or HLT

  Read the article

• RAID 0 Volatile Volume Cache Mode configuration

  - by SnippetSpace

  I discovered that in IRST there is an option to set a cache mode for my 3 ssd raid 0 array. I've read the documentation by Intel and have some questions: Are there any overall benefits/risks from enabling cache mode? As I'm on a laptop, would write back be recommended? I read it increases chance of data loss on power interruption. What is the difference between how windows handles data integrity and the intel driver? Read only mode seems to have the benefit of faster reads, does it have any downsides? Thanks for your help guys!

  Read the article

• Windows 2003 VM, not connecting to VM Network

  - by TheWellington

  I am running VMware's vSphere infrastructure. I have a windows 2003 VM that is suddenly not connected to the network. I can log into vSphere and see that the VM is running, but it does not connect to the VM network. The firewall on this VM is not running. The network adapter in the VM is configured correctly. The only evidence I see indicating an issue is in the event viewer. I have the following entry. Source: VMUpgradeHelper EventID: 270 Description: Not restoring network configuration for adapter with MAC address 00:50:56:xx:xx:xx. The device ID for this adapter is unchanged. THis VM is a webserver, and it was working beautifully just two days ago. "nothing" has happened... so I am at a loss as to what may have happened. Ideas??

  Read the article

• PXE E52 proxyDHCP offers were received. No DHCP offers were received

  - by TonyP

  Have a Lenovo laptop which i'm trying to capture an image from as a test (we are moving from HP as our std laptop) and i keep getting the PXE E52 error when trying to boot from LAN. With things exactly as they are all the previous HP models are connecting ok. I'm at a loss as to what to test, as its working for the HP kit and don't want to break that. Note: DHCP server and WDS server are two separate boxes but on same scope, VLAN, etc. and the DHCP lease is not full.

  Read the article

• osx split external hard drive partition

  - by Bart

  Hi, I currently have a 640GB external HD that has 1 partition formatted as HSF+ Now I want to split some of the free space into a new FAT32 partition, without having to reformat the whole HD and losing all my data. I read that I'm supposed to be able to add new partitions in the Hard Disc Utility by clicking the "+" sign, without any loss of data. But in my case the "+" is not clickable and it says that this partition cannot be altered. Can anyone tell me how to proceed. Or is it impossible without reformatting the whole disc? Thanks ps: I'm running osx snow leopard 10.6.6

  Read the article

• Trouble using Upstart to launch Redis as redis user

  - by Chris

  I'm trying to launch redis-server as a user (called redis) via Upstart. My /etc/init/redis-server.conf looks like this: description "redis server" start on runlevel [23] stop on shutdown exec sudo -u redis /usr/local/bin/redis-server /var/lib/redis/redis.conf Looks good, right? I start redis-server using $start redis-server redis-server start/running, process 16808 $redis-cli Could not connect to Redis at 127.0.0.1:6379: Connection refused $ps ax | grep ps 168 16810 tty1 R+ 0:00 ps ax 16811 tty1 S+ 0:00 grep 168 So redis-server definitely isn't running. Let's try executing the Upstart command by hand, shall we? exec sudo -u redis /usr/local/bin/redis-server /var/lib/redis/redis.conf [16852] 19 Jun 10:37:21 # Can't chdir to './': Permission denied Connection to 10.19.2.94 closed. And then I get logged off. I'm at a loss. Any ideas?

  Read the article

• OpenLDAP and Samba, can't log onto Samba share from Windows

  - by Jakobud

  The former jackass IT-guy that I'm taking over for had a Samba share setup on a Fedora server that uses our OpenLDAP server to authenticate users who want to log in from Windows. We recently added a new employee and I jumped through the LDAP hoops to add them to the system. However, I can't seem to use their login to access the Samba share. I'm looking through the LDAP settings and Groups and comparing the new user account to existing ones, and I can't figure out what settings in LDAP are required for this user to be able to access the Samba share. Of course the former idiotic IT-guy didn't document a single thing and has all sorts of weird setups on the network. So I'm at a bit of a loss on knowing what to look for here. Where should I start? On the server that is hosting the Samba share, he has samba running obviously but also has smbldap-tools loaded as well.

  Read the article

• How best to troubleshoot a WIA issue through an IIS7 reverse proxy.

  - by CptSkippy

  I've got an Intranet site that uses Windows Authentication and is accessed through an IIS 7 Reverse Proxy. Using FireFox, Safari or Chrome it works fine. I'm prompted for credentials, I supply them and away I go. In IE 7/8 I get prompted for credentials but they're rejected and I eventually get a 401 not authorized error. The application server is configured for Windows Auth only and rejects basic authentication. I would be surprised if the front end proxy would accept Basic Auth so my suspicion is that it's a trust issue with my browser and IE isn't relaying the credentials however our IS Team has IE so locked down I'm unable to alter trust levels or even view the settings. How should I go about troubleshooting this problem? I'm at a loss and they've yet to respond to my support ticket.

  Read the article

• Using mod_rewrite for a RESTful api

  - by razass

  Say the user is making a request to the following url: "http://api.example.com/houses/123/abc" That request needs to map to "/webroot/index.php" and 'houses', '123', 'abc' need to be able to be parsed out of the URL in that index.php. It also can't alter the http headers or body. There can be any number of variables after the domain ie) "http://api.example.com/houses/1234/abc/zxy/987" I think I already have all requests being sent to webroot using: <IfModule mod_rewrite.c> RewriteEngine on RewriteCond $0 !^webroot/ RewriteRule .* webroot/$0 [L] </IfModule> Which appears to be working but I am not sure if it is correct. But now I am at a loss as to how to take the next step as mentioned above. Thanks in advance!

  Read the article

• Windows 2003 VM, not connecting to VM Network

  - by TheWellington

  I am running VMware's vSphere infrastructure. I have a windows 2003 VM that is suddenly not connected to the network. I can log into vSphere and see that the VM is running, but it does not connect to the VM network. The firewall on this VM is not running. The network adapter in the VM is configured correctly. The only evidence I see indicating an issue is in the event viewer. I have the following entry. Source: VMUpgradeHelper EventID: 270 Description: Not restoring network configuration for adapter with MAC address 00:50:56:xx:xx:xx. The device ID for this adapter is unchanged. THis VM is a webserver, and it was working beautifully just two days ago. "nothing" has happened... so I am at a loss as to what may have happened. Ideas??

  Read the article

• Bulk convert PNG-24 to PNG-8 files with best quality

  - by Gavin

  Hi, Can anybody recommend a good method of bulk converting a large amount of PNG-24 files to PNG-8 with as little loss of quality as possible and maintaining transparency? I've tried ImageMagick but the resulting images weren't quite as crisp quality as I'd like. Using Paint.NET I was able to achieve far better results, but I can't bulk process with this tool as far as I know. The settings I used with ImageMagick in case there's better options to use: convert file.png -depth 4 file-output.png I've also been playing with OptiPNG, but I haven't discovered a was of making sure the output images are PNG-8. Cheers, Gavin

  Read the article

• Bypass BIOS password set by faulty Toshiba firmware on Satellite A55 laptop?

  - by Brian

  How can the CMOS be cleared on the Toshiba Satellite A55-S1065? I have this 7 year old laptop that has been crippled by a glitch in its BIOS: 'A "Password =" prompt may be displayed when the computer is turned on, even though no power-on password has been set. If this happens, there is no password that will satisfy the password request. The computer will be unusable until this problem is resolved. [..] The occurrence of this problem on any particular computer is unpredictable -- it may never happen, but it could happen any time that the computer is turned on. [..] Toshiba will cover the cost of this repair under warranty until Dec 31, 2010.' -Toshiba As they stated, this machine is "unusable." The escape key does not bypass the prompt (nor does any other key), thus no operating system can be booted and no firmware updates can be installed. After doing some research, I found solutions that have been suggested for various Toshiba Satellite models afflicted by this glitch: "Make arrangements with a Toshiba Authorized Service Provider to have this problem resolved." -Toshiba (same link). Even prior to the expiration of Toshiba's support ("repair under warranty until Dec 31, 2010"), there have been reports that this solution is prohibitively expensive, labor charges accruing even when the laptop is still under warranty, and other reports that are generally discouraging: "They were unable to fix it and the guy who worked on it said he couldn’t find the jumpers on the motherboard to clear the BIOS. I paid $39 for my troubles and still have the password problem." - Steve. Since the costs of the repairs can now exceed the value of the hardware, it would seem this is a DIY solution, or a non-solution (i.e. the hardware is trash). Build a Toshiba parallel loopback by stripping and soldering the wires on a DB25 plug to connect connect these pins: 1-5-10, 2-11, 3-17, 4-12, 6-16, 7-13, 8-14, 9-15, 18-25. -CGSecurity. According to a list of supported models on pwcrack, this will likely not work for my Satellite A55-1065 (as well as many other models of similar age). -pwcrack Disconnect the laptop battery for an extended period of time. Doesn't work, laptop sat in a closet for several years without the battery connected and I forgot about the whole thing for awhile. The poor thing. Clear CMOS by setting the proper jumper setting or by removing the CMOS (RTC) battery, or by short circuiting a (hidden?) jumper that looks like a pair of solder marks -various sources for various Satellite models: Satellite A105: "you will see C88 clearly labeled right next the jack that the wireless card plugs into. There are two little solder squares (approx 1/16") at this location" -kerneltrap Satellite 1800: "Underneath the RAM there is black sticker, peel off the black sticker and you will reveal two little solder marks which are actually 'jumpers'. Very carefully hold a flat-head screwdriver touching both points and power on the unit briefly, effectively 'shorting' this circuit." -shadowfax2020 Satellite L300: "Short the B500 solder pads on the system board." -Lester Escobar Satellite A215: "Short the B500 solder pads on the system board." -fixya Clearing the CMOS could resolve the issue, but I cannot locate a jumper or a battery on this board. Nothing that looks remotely like a battery can be removed (everything is soldered). I have looked closely at the area around the memory and do not see any obvious solder pads that could be a secret jumper. Here are pictures (click for full resolution) : Where is the jumper (or solder pads) to short circuit and wipe the CMOS on this board? Possibly related questions: Remove Toshiba laptop BIOS password? Password Problem Toshiba Satellite..

  Read the article

• Install Applications on OpenSUSE 11.2 w/ GNOME desktop

  - by dboarman

  Being new to OpenSUSE (v.11.2) and the GNOME desktop, I am somewhat at a loss. The differences between installing applications on Windows (formerly XP & Windows for the last 15+ years) seem to be just different enough that I am having some difficulty. For instance, how do I determine what install package I would download? Then, how do I actually install a tar.gz file or rpm, or whatever? I tried updating the Flash driver for my FoxTabs addon in FireFox but got an error that the /tmp/ directory wasn't to be used to run media, or something to that affect. So, I thought I would try to figure out first how to determine what file package to download, then how to install. I'm not sure that I need an OpenSUSE for Dummies type of link, but something that explicitly details differences in everyday operations and corresponding equivalents between Windows and OpenSUSE/GNOME. I'm also looking for a good IRC chat client.

  Read the article

• Files missing after copying from one sdcard to another using Ubuntu 12.04

  - by Abhi Kandoi

  I have two Kingston sdcards 8GB and 32GB. The 8GB for HTC Sensation and 32GB for my Tablet (Chinese). I soon ran out of space on my phone and decided to swap the data between the sdcards. I copied the data of 32GB sdcard to my PC(with Ubuntu 12.04) deleted everything on the 32GB sdcard and copied data from the 8GB sdcard to the other sdcard. At last I copied the data from my PC to the 8GB sdcard(before this I deleted everything that was on it before). Now the problem is that the 8GB sdcard has the data exactly the same, but the 32GB sdcard has some missing data. All my photos(not copied or posted on Facebook) and Songs are lost. Please help as to what I can do to get my data back? I have Android Revolution HD (ICS 4.0.3) on my rooted HTC Sensation (India). I suspect it has something to do with my data loss.

  Read the article

• MOSS Upload Size?

  - by littlegeek

  Hi In MOSS we have done all of this to increase the file upload size, reset iis but still doesnt want to play = anyone any advice. UPDATE Just seen the Scott Gu article - http://weblogs.asp.net/pscott/archive/2009/02/26/404-errors-with-fileupload-with-iis7.aspx and JS example http://msmvps.com/blogs/cgross/archive/2009/02/25/large-files-in-sbs-2008-s-companyweb.aspx So need to say this is II6 on win2k3 Update 2 still not working at a loss anyone help? In SharePoint 3.0 Central Adminisration, Application Management tab, and Web application general settings configure the Maximum upload size to a maximum of 2047 MB. - We set ours to 250MB In Internet Information Services on the properties of the virtual server increase the Connection Timeout to greater than default 120 seconds depending on the time to upload large files in your environment for example, 360 seconds. - We set ours to 600 Secs Configure the web.config for the _layouts web.config with On the SharePoint server change C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE\LAYOUTS\web.config with an executionTimeout appropriate for the file size you are uploading. An example is included below. from: to: executionTimeout="999999" maxRequestLength="2097151" /

  Read the article

• Dual monitors through 1 HDMI port

  - by Carlos

  I currently have a Dell Studio XPS 13 laptop connected to a 24" HP monitor (w2448hc). Im thinking on getting a second one, however am wondering what i need for the setup (hardware wise). Also I was wondering it there is any down side to it, or something i should be aware of. For example, image quality loss, GPU overloading, or anything important I should know. More than anything Im interested in your advice. Also the monitors do have built in speakers (HDMI sound output), is the sound going to be reproduced by only one monitor or both? Specs Model: Dell Studio XPS 13 OS: Genuine Windows® 7 Home Premium 64-Bit CPU: Intel® CoreTM 2 Duo P8600 (2.4GHz, 3MB L2 Cache, 1067MHz FSB) Chipset: NVIDIA® GeForce® MCP79MX RAM: 4GB 1067MHz DDR3 SDRAM Graphics: SLi NVIDIA® GeForce® 9500M - 256MB Thanks for your advice, if there is anything additional i need to buy an you have a personal preference pass the brand name so i can check it out. Thanks!

  Read the article

• Exchange 2007 ignoring Send Connectors (again)

  - by gravyface

  Wow, I'm at a loss here -- I posted this exact same question a while back and it's doing the exact same thing: my Send Connector I've created for "Microsoft Domains" (hotmail.com cost 1) is being ignored again and routed through the "Default" Send Connector (* cost 10). Last time, I had the same cost for both Send Connectors, but I've tried setting the Default connector to 5, 10, 100, etc. and regardless, all mail gets routed through that connector (which smarthosts through Postini). Besides calling an air strike on Redmond, what else can I do? MS is blocking Postini again, need to get this working permanently.

  Read the article

• Event Viewer: atapi errors

  - by Wesley

  Specs for Samsung N120 Netbook Atom N270 @ 1.60 GHz / 160 GB IDE HDD / 2 GB PC2-5300 DDR2 RAM / Windows XP Home SP3 So I'm still getting some atapi errors in my Event Viewer. Here are two atapi errors I am getting over and over again: (1) The device, \Device\Ide\IdePort0, did not respond within the timeout period. (2) The driver detected a controller error on \Device\Ide\IdePort0. In addition, I am repeatedly getting this warning as well: (1) An error was detected on device \Device\Harddisk0\D during a paging operation. I just got this back from repair, where before, I couldn't boot at all because I was led to a black screen saying "Operating System Not Found". Still, I got it back and it can boot again, without any hard drive replacement or data loss. So, how can I get rid of these errors and warnings? What could have happened during repairs to allow my netbook to boot again? Thanks in advance.

  Read the article

• HP Pavilion: Sound problem after Windows Vista SP2 update

  - by Mehper C. Palavuzlar

  I have HP Pavilion dv-2051et notebook with Windows Vista Home Premium SP1. Recently the sound of my notebook completely went off and I poked up Windows sound settings and IDT HD Sound panel to bring it back, but to no avail (trust me, I looked at every setting). Then I made a system restore to the point located just before Vista SP2 was installed. The sounds came back. Afterwards, I installed Vista SP2 again, and the sounds went off again. SP2 installation causes complete loss of sounds of my notebook. What can I do to overcome this problem? I don't want to stay with SP1 but installing SP2 brings me a huge problem. Anyone experienced this lately? Any recommendations? Thanks in advance.

  Read the article

• Online remount btrfs of root filesystem with different subvolume (snapshot) [migrated]

  - by goncalopp

  Let's say you have a btrfs root filesystem on an online system. You want to revert the filesystem to an earlier state, of which you have a snapshot: remount /dev/sdaX / -o remount,subvol=snapshots/Y For the record, I've done this in a test system, and it does not work. The command returns with no errors, but the subvolume mounted is the same. If this did work, what would be the consequences? My guess is that open file descriptors would still point to the old subvolume, thus possibly leading to "data loss" on the new subvolume, if one was not careful. Assuming one goes to the trouble of closing and reopening all open file descriptors, does this sound feasible? Or are there other types of problems?

  Read the article

• Dual monitors though 1 HDMI port

  - by Carlos

  I currently have a Dell Studio XPS 13 laptop connected to a 24" HP monitor (w2448hc). Im thinking on getting a second one, however am wondering what i need for the setup (hardware wise). Also I was wondering it there is any down side to it, or something i should be aware of. For example, image quality loss, GPU overloading, or anything important I should know. More than anything Im interested in your advice. Also the monitors do have built in speakers (HDMI sound output), is the sound going to be reproduced by only one monitor or both? Specs Model: Dell Studio XPS 13 OS: Genuine Windows® 7 Home Premium 64-Bit CPU: Intel® CoreTM 2 Duo P8600 (2.4GHz, 3MB L2 Cache, 1067MHz FSB) Chipset: NVIDIA® GeForce® MCP79MX RAM: 4GB 1067MHz DDR3 SDRAM Graphics: SLi NVIDIA® GeForce® 9500M - 256MB Thanks for your advice, if there is anything additional i need to buy an you have a personal preference pass the brand name so i can check it out. Thanks!

  Read the article

• setting ulimit and ubuntu 8.04

  - by Wizzard

  Hi there, We have two ubuntu 8.04 servers. With the database server I set the table_cache to 1000 however when I restart mysql the status only shows 257 and the open files limit says 1024 I adjusted ulimit by doing ulimit -n 8192 and then restarting mysql; this seemed to do the tick however after a few hours I did ulimit -n and saw it had returned back to 1024 Bit of a worry. I edited the /etc/security/limits.conf and added mysql soft nofile 8192 mysql hard nofile 8192 then rebooted, no change. I then edited and change mysql to * rebooted, no change I then edited and changed it to one line * - nofile 8192 and rebooted, no change. cat /proc/sys/fs/file-max gives me 768730 sysctl fs.file-max gives me fs.file-max = 768730 I am at a bit of a loss to how I can set and keep the ulimit value set so I can increase the table cache properly on mysql.

  Read the article

• Linux - Only first virtual interface can ping external gateway

  - by husvar

  I created 3 virtual interfaces with different mac addresses all linked to the same physical interface. I see that they successfully arp for the gw and they can ping (the request is coming in the packet capture in wireshark). However the ping utility does not count the responses. Does anyone knows the issue? I am running Ubuntu 14.04 in a VmWare. root@ubuntu:~# ip link sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 link/ether 00:0c:29:bc:fc:8b brd ff:ff:ff:ff:ff:ff root@ubuntu:~# ip addr sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 00:0c:29:bc:fc:8b brd ff:ff:ff:ff:ff:ff inet6 fe80::20c:29ff:febc:fc8b/64 scope link valid_lft forever preferred_lft forever root@ubuntu:~# ip route sh root@ubuntu:~# ip link add link eth0 eth0.1 addr 00:00:00:00:00:11 type macvlan root@ubuntu:~# ip link add link eth0 eth0.2 addr 00:00:00:00:00:22 type macvlan root@ubuntu:~# ip link add link eth0 eth0.3 addr 00:00:00:00:00:33 type macvlan root@ubuntu:~# ip -4 link sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 link/ether 00:0c:29:bc:fc:8b brd ff:ff:ff:ff:ff:ff 18: eth0.1@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default link/ether 00:00:00:00:00:11 brd ff:ff:ff:ff:ff:ff 19: eth0.2@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default link/ether 00:00:00:00:00:22 brd ff:ff:ff:ff:ff:ff 20: eth0.3@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default link/ether 00:00:00:00:00:33 brd ff:ff:ff:ff:ff:ff root@ubuntu:~# ip -4 addr sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever root@ubuntu:~# ip -4 route sh root@ubuntu:~# dhclient -v eth0.1 Internet Systems Consortium DHCP Client 4.2.4 Copyright 2004-2012 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0.1/00:00:00:00:00:11 Sending on LPF/eth0.1/00:00:00:00:00:11 Sending on Socket/fallback DHCPDISCOVER on eth0.1 to 255.255.255.255 port 67 interval 3 (xid=0x568eac05) DHCPREQUEST of 192.168.1.145 on eth0.1 to 255.255.255.255 port 67 (xid=0x568eac05) DHCPOFFER of 192.168.1.145 from 192.168.1.254 DHCPACK of 192.168.1.145 from 192.168.1.254 bound to 192.168.1.145 -- renewal in 1473 seconds. root@ubuntu:~# dhclient -v eth0.2 Internet Systems Consortium DHCP Client 4.2.4 Copyright 2004-2012 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0.2/00:00:00:00:00:22 Sending on LPF/eth0.2/00:00:00:00:00:22 Sending on Socket/fallback DHCPDISCOVER on eth0.2 to 255.255.255.255 port 67 interval 3 (xid=0x21e3114e) DHCPREQUEST of 192.168.1.146 on eth0.2 to 255.255.255.255 port 67 (xid=0x21e3114e) DHCPOFFER of 192.168.1.146 from 192.168.1.254 DHCPACK of 192.168.1.146 from 192.168.1.254 bound to 192.168.1.146 -- renewal in 1366 seconds. root@ubuntu:~# dhclient -v eth0.3 Internet Systems Consortium DHCP Client 4.2.4 Copyright 2004-2012 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0.3/00:00:00:00:00:33 Sending on LPF/eth0.3/00:00:00:00:00:33 Sending on Socket/fallback DHCPDISCOVER on eth0.3 to 255.255.255.255 port 67 interval 3 (xid=0x11dc5f03) DHCPREQUEST of 192.168.1.147 on eth0.3 to 255.255.255.255 port 67 (xid=0x11dc5f03) DHCPOFFER of 192.168.1.147 from 192.168.1.254 DHCPACK of 192.168.1.147 from 192.168.1.254 bound to 192.168.1.147 -- renewal in 1657 seconds. root@ubuntu:~# ip -4 link sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 link/ether 00:0c:29:bc:fc:8b brd ff:ff:ff:ff:ff:ff 18: eth0.1@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether 00:00:00:00:00:11 brd ff:ff:ff:ff:ff:ff 19: eth0.2@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether 00:00:00:00:00:22 brd ff:ff:ff:ff:ff:ff 20: eth0.3@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether 00:00:00:00:00:33 brd ff:ff:ff:ff:ff:ff root@ubuntu:~# ip -4 addr sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever 18: eth0.1@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default inet 192.168.1.145/24 brd 192.168.1.255 scope global eth0.1 valid_lft forever preferred_lft forever 19: eth0.2@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default inet 192.168.1.146/24 brd 192.168.1.255 scope global eth0.2 valid_lft forever preferred_lft forever 20: eth0.3@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default inet 192.168.1.147/24 brd 192.168.1.255 scope global eth0.3 valid_lft forever preferred_lft forever root@ubuntu:~# ip -4 route sh default via 192.168.1.254 dev eth0.1 192.168.1.0/24 dev eth0.1 proto kernel scope link src 192.168.1.145 192.168.1.0/24 dev eth0.2 proto kernel scope link src 192.168.1.146 192.168.1.0/24 dev eth0.3 proto kernel scope link src 192.168.1.147 root@ubuntu:~# arping -c 5 -I eth0.1 192.168.1.254 ARPING 192.168.1.254 from 192.168.1.145 eth0.1 Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 6.936ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 2.986ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 0.654ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 5.137ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 2.426ms Sent 5 probes (1 broadcast(s)) Received 5 response(s) root@ubuntu:~# arping -c 5 -I eth0.2 192.168.1.254 ARPING 192.168.1.254 from 192.168.1.146 eth0.2 Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 5.665ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 3.753ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 16.500ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 3.287ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 32.438ms Sent 5 probes (1 broadcast(s)) Received 5 response(s) root@ubuntu:~# arping -c 5 -I eth0.3 192.168.1.254 ARPING 192.168.1.254 from 192.168.1.147 eth0.3 Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 4.422ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 2.429ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 2.321ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 40.423ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 2.268ms Sent 5 probes (1 broadcast(s)) Received 5 response(s) root@ubuntu:~# tcpdump -n -i eth0.1 -v & [1] 5317 root@ubuntu:~# ping -c5 -q -I eth0.1 192.168.1.254 PING 192.168.1.254 (192.168.1.254) from 192.168.1.145 eth0.1: 56(84) bytes of data. tcpdump: listening on eth0.1, link-type EN10MB (Ethernet), capture size 65535 bytes 13:18:37.612558 IP (tos 0x0, ttl 64, id 2595, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.145 > 192.168.1.254: ICMP echo request, id 5318, seq 2, length 64 13:18:37.618864 IP (tos 0x68, ttl 64, id 14493, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.145: ICMP echo reply, id 5318, seq 2, length 64 13:18:37.743650 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 13:18:38.134997 IP (tos 0x0, ttl 128, id 23547, offset 0, flags [none], proto UDP (17), length 229) 192.168.1.86.138 > 192.168.1.255.138: NBT UDP PACKET(138) 13:18:38.614580 IP (tos 0x0, ttl 64, id 2596, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.145 > 192.168.1.254: ICMP echo request, id 5318, seq 3, length 64 13:18:38.793479 IP (tos 0x68, ttl 64, id 14495, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.145: ICMP echo reply, id 5318, seq 3, length 64 13:18:39.151282 IP6 (class 0x68, hlim 255, next-header ICMPv6 (58) payload length: 32) fe80::5a98:35ff:fe57:e070 > ff02::1:ff6b:e9b4: [icmp6 sum ok] ICMP6, neighbor solicitation, length 32, who has 2001:818:d812:da00:8ae3:abff:fe6b:e9b4 source link-address option (1), length 8 (1): 58:98:35:57:a0:70 13:18:39.615612 IP (tos 0x0, ttl 64, id 2597, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.145 > 192.168.1.254: ICMP echo request, id 5318, seq 4, length 64 13:18:39.746981 IP (tos 0x68, ttl 64, id 14496, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.145: ICMP echo reply, id 5318, seq 4, length 64 --- 192.168.1.254 ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4008ms rtt min/avg/max/mdev = 2.793/67.810/178.934/73.108 ms root@ubuntu:~# killall tcpdump >> /dev/null 2>&1 9 packets captured 12 packets received by filter 0 packets dropped by kernel [1]+ Done tcpdump -n -i eth0.1 -v root@ubuntu:~# tcpdump -n -i eth0.2 -v & [1] 5320 root@ubuntu:~# ping -c5 -q -I eth0.2 192.168.1.254 PING 192.168.1.254 (192.168.1.254) from 192.168.1.146 eth0.2: 56(84) bytes of data. tcpdump: listening on eth0.2, link-type EN10MB (Ethernet), capture size 65535 bytes 13:18:41.536874 ARP, Ethernet (len 6), IPv4 (len 4), Reply 192.168.1.254 is-at 58:98:35:57:a0:70, length 46 13:18:41.536933 IP (tos 0x0, ttl 64, id 2599, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.146 > 192.168.1.254: ICMP echo request, id 5321, seq 1, length 64 13:18:41.539255 IP (tos 0x68, ttl 64, id 14507, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.146: ICMP echo reply, id 5321, seq 1, length 64 13:18:42.127715 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 13:18:42.511725 IP (tos 0x0, ttl 64, id 2600, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.146 > 192.168.1.254: ICMP echo request, id 5321, seq 2, length 64 13:18:42.514385 IP (tos 0x68, ttl 64, id 14527, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.146: ICMP echo reply, id 5321, seq 2, length 64 13:18:42.743856 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 13:18:43.511727 IP (tos 0x0, ttl 64, id 2601, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.146 > 192.168.1.254: ICMP echo request, id 5321, seq 3, length 64 13:18:43.513768 IP (tos 0x68, ttl 64, id 14528, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.146: ICMP echo reply, id 5321, seq 3, length 64 13:18:43.637598 IP (tos 0x0, ttl 128, id 23551, offset 0, flags [none], proto UDP (17), length 225) 192.168.1.86.17500 > 255.255.255.255.17500: UDP, length 197 13:18:43.641185 IP (tos 0x0, ttl 128, id 23552, offset 0, flags [none], proto UDP (17), length 225) 192.168.1.86.17500 > 192.168.1.255.17500: UDP, length 197 13:18:43.641201 IP (tos 0x0, ttl 128, id 23553, offset 0, flags [none], proto UDP (17), length 225) 192.168.1.86.17500 > 255.255.255.255.17500: UDP, length 197 13:18:43.743890 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 13:18:44.510758 IP (tos 0x0, ttl 64, id 2602, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.146 > 192.168.1.254: ICMP echo request, id 5321, seq 4, length 64 13:18:44.512892 IP (tos 0x68, ttl 64, id 14538, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.146: ICMP echo reply, id 5321, seq 4, length 64 13:18:45.510794 IP (tos 0x0, ttl 64, id 2603, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.146 > 192.168.1.254: ICMP echo request, id 5321, seq 5, length 64 13:18:45.519701 IP (tos 0x68, ttl 64, id 14539, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.146: ICMP echo reply, id 5321, seq 5, length 64 13:18:49.287554 IP6 (class 0x68, hlim 255, next-header ICMPv6 (58) payload length: 32) fe80::5a98:35ff:fe57:e070 > ff02::1:ff6b:e9b4: [icmp6 sum ok] ICMP6, neighbor solicitation, length 32, who has 2001:818:d812:da00:8ae3:abff:fe6b:e9b4 source link-address option (1), length 8 (1): 58:98:35:57:a0:70 13:18:50.013463 IP (tos 0x0, ttl 255, id 50737, offset 0, flags [DF], proto UDP (17), length 73) 192.168.1.146.5353 > 224.0.0.251.5353: 0 [2q] PTR (QM)? _ipps._tcp.local. PTR (QM)? _ipp._tcp.local. (45) 13:18:50.218874 IP6 (class 0x68, hlim 255, next-header ICMPv6 (58) payload length: 32) fe80::5a98:35ff:fe57:e070 > ff02::1:ff6b:e9b4: [icmp6 sum ok] ICMP6, neighbor solicitation, length 32, who has 2001:818:d812:da00:8ae3:abff:fe6b:e9b4 source link-address option (1), length 8 (1): 58:98:35:57:a0:70 13:18:51.129961 IP6 (class 0x68, hlim 255, next-header ICMPv6 (58) payload length: 32) fe80::5a98:35ff:fe57:e070 > ff02::1:ff6b:e9b4: [icmp6 sum ok] ICMP6, neighbor solicitation, length 32, who has 2001:818:d812:da00:8ae3:abff:fe6b:e9b4 source link-address option (1), length 8 (1): 58:98:35:57:a0:70 13:18:52.197074 IP6 (hlim 255, next-header UDP (17) payload length: 53) 2001:818:d812:da00:200:ff:fe00:22.5353 > ff02::fb.5353: [udp sum ok] 0 [2q] PTR (QM)? _ipps._tcp.local. PTR (QM)? _ipp._tcp.local. (45) 13:18:54.128240 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 --- 192.168.1.254 ping statistics --- 5 packets transmitted, 0 received, 100% packet loss, time 4000ms root@ubuntu:~# killall tcpdump >> /dev/null 2>&1 13:18:54.657731 IP6 (class 0x68, hlim 255, next-header ICMPv6 (58) payload length: 32) fe80::5a98:35ff:fe57:e070 > ff02::1:ff6b:e9b4: [icmp6 sum ok] ICMP6, neighbor solicitation, length 32, who has 2001:818:d812:da00:8ae3:abff:fe6b:e9b4 source link-address option (1), length 8 (1): 58:98:35:57:a0:70 13:18:54.743174 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 25 packets captured 26 packets received by filter 0 packets dropped by kernel [1]+ Done tcpdump -n -i eth0.2 -v root@ubuntu:~# tcpdump -n -i eth0.3 icmp & [1] 5324 root@ubuntu:~# ping -c5 -q -I eth0.3 192.168.1.254 PING 192.168.1.254 (192.168.1.254) from 192.168.1.147 eth0.3: 56(84) bytes of data. tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0.3, link-type EN10MB (Ethernet), capture size 65535 bytes 13:18:56.373434 IP 192.168.1.147 > 192.168.1.254: ICMP echo request, id 5325, seq 1, length 64 13:18:57.372116 IP 192.168.1.147 > 192.168.1.254: ICMP echo request, id 5325, seq 2, length 64 13:18:57.381263 IP 192.168.1.254 > 192.168.1.147: ICMP echo reply, id 5325, seq 2, length 64 13:18:58.371141 IP 192.168.1.147 > 192.168.1.254: ICMP echo request, id 5325, seq 3, length 64 13:18:58.373275 IP 192.168.1.254 > 192.168.1.147: ICMP echo reply, id 5325, seq 3, length 64 13:18:59.371165 IP 192.168.1.147 > 192.168.1.254: ICMP echo request, id 5325, seq 4, length 64 13:18:59.373259 IP 192.168.1.254 > 192.168.1.147: ICMP echo reply, id 5325, seq 4, length 64 13:19:00.371211 IP 192.168.1.147 > 192.168.1.254: ICMP echo request, id 5325, seq 5, length 64 13:19:00.373278 IP 192.168.1.254 > 192.168.1.147: ICMP echo reply, id 5325, seq 5, length 64 --- 192.168.1.254 ping statistics --- 5 packets transmitted, 1 received, 80% packet loss, time 4001ms rtt min/avg/max/mdev = 13.666/13.666/13.666/0.000 ms root@ubuntu:~# killall tcpdump >> /dev/null 2>&1 9 packets captured 10 packets received by filter 0 packets dropped by kernel [1]+ Done tcpdump -n -i eth0.3 icmp root@ubuntu:~# arp -n Address HWtype HWaddress Flags Mask Iface 192.168.1.254 ether 58:98:35:57:a0:70 C eth0.1 192.168.1.254 ether 58:98:35:57:a0:70 C eth0.2 192.168.1.254 ether 58:98:35:57:a0:70 C eth0.3

  Read the article

• Is there a Linux distro that will easily run "embedded style" on a Raspberry Pi?

  - by Dan Harper

  I need a Linux distro that will give me the following: Run on a Raspberry Pi Can reliably survive power loss (like via a read-only filesystem) I've been able to hunt down some documentation on how to change a regular Linux distro over to read-only mode. I was hoping that there would be a distro already built that was designed to run in an embedded environment. I don't need many packages or drivers, just enough to have the Pi working with USB/Ethernet. I don't need any GUI interface or anything, this will just be running a custom service built in C. Does anyone know of a distro that would fit?

  Read the article

• mac osX file recovery

  - by Daniel

  I thought that all operating systems would merge folder content when being moved to the same location. Imagine my surprise when that didn't happen and I have hundreds, if not thousands of files that have gone missing and are nowhere to be found. Because they were not "deleted" they are not in the trash bin. I've tried to do some recovery using a program called stellarPheonix but after about a 24hour scan, it didn't recognize any of the raw files (.dng,.arw) as image files and so I couldn't see if they could be recovered. It also didn't show the directory structure, which would be handy. I tried a quick scan, but all it showed was files that were still on the HD, not sure what the point of that is. I've used recover 2000 on Win and it does a good job, does anyone know of anything that works quickly and reliably for this kind of file recovery. (I don't think I should have to do a sector-by=sector for this kind of file loss)

  Read the article

< Previous Page | 140 141 142 143 144 145 146 147 148 149 150 151  | Next Page >