Search Results

Search found 6972 results on 279 pages for 'usb sata'.

Page 144/279 | < Previous Page | 140 141 142 143 144 145 146 147 148 149 150 151  | Next Page >

• Built-in network card not working?

  - by Zeeshan

  Hi, I am new to Ubuntu. I have installed Ubuntu 9.04(Jaunty). After installation I found that network card is not wokring. And id doest not list in "System Preferenes Network Connections" So , i got another card from my friend and try to search on internat about my problem but still cant find solution. Some commands output is here which may be help to solve problem root@mzeeshan-desktop:/home/mzeeshan# uname -r 2.6.28-11-generic root@mzeeshan-desktop:/home/mzeeshan# ifconfig -a eth0 Link encap:Ethernet HWaddr 00:02:44:4a:45:12 inet addr:192.168.5.37 Bcast:192.168.5.255 Mask:255.255.255.0 inet6 addr: fe80::202:44ff:fe4a:4512/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3774 errors:0 dropped:0 overruns:0 frame:0 TX packets:3611 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4307045 (4.3 MB) TX bytes:583067 (583.0 KB) Interrupt:22 Base address:0x1000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:240 (240.0 B) TX bytes:240 (240.0 B) pan0 Link encap:Ethernet HWaddr 5e:25:17:a1:18:ac BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) root@mzeeshan-desktop:/home/mzeeshan# lspci 00:00.0 Host bridge: Intel Corporation Device 0069 (rev 12) 00:01.0 PCI bridge: Intel Corporation Auburndale/Havendale PCI Express x16 Root Port (rev 12) 00:19.0 Ethernet controller: Intel Corporation Device 10f0 (rev 05) 00:1a.0 USB Controller: Intel Corporation Ibex Peak USB2 Enhanced Host Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 1 (rev 05) 00:1c.4 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 5 (rev 05) 00:1c.6 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 7 (rev 05) 00:1c.7 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 8 (rev 05) 00:1d.0 USB Controller: Intel Corporation Ibex Peak USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Ibex Peak LPC Interface Controller (rev 05) 00:1f.2 IDE interface: Intel Corporation Ibex Peak 4 port SATA IDE Controller (rev 05) 00:1f.3 SMBus: Intel Corporation Ibex Peak SMBus Controller (rev 05) 00:1f.5 IDE interface: Intel Corporation Ibex Peak 2 port SATA IDE Controller (rev 05) 01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400 GS (rev a1) 06:00.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07) 06:00.1 Input device controller: Creative Labs SB Live! Game Port (rev 07) 06:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 06:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) root@mzeeshan-desktop:/home/mzeeshan# Motherboard is Intel DP55WG. I don't know what to do next. Any help will be greatly appreciated.. Thanks

  Read the article

• How to reinstall Ubuntu keeping my data intact?

  - by Santosh Linkha

  I want to reinstall Ubuntu keeping my data intact. I have 160 GB hardrive (sata or pata I don't know but it's slim and made in China) with a 40 GB ext3 partition, a 4GB swap memory and 3 other partition with a FAT32 file system. I have around 4GB space on my drive where Linux is installed. I'd like to keep the data intact, especially the Downloads folder, desktop, and /var/www; And I no longer have access to any other machines or external storage devices.

  Read the article

• Wireless not working with a RaLink RT3090

  - by Promather

  I recently bought a new HP DV6-3118SA laptop, but I am having a very discouraging problem with wireless LAN. It simply doesn't work! Could you please help me with this? Output of lspci -k: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) Kernel driver in use: pcieport Kernel modules: shpchp 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) Subsystem: Hewlett-Packard Company Device 144a 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: i2c-i801 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: intel ips Kernel modules: intel_ips 01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: radeon Kernel modules: radeon 01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 02:00.0 Network controller: RaLink RT3090 Wireless 802.11n 1T/1R PCIe Subsystem: Hewlett-Packard Company Device 1453 Kernel driver in use: rt2800pci Kernel modules: rt2860sta, rt2800pci 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: r8169 Kernel modules: r8169 7f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a

  Read the article

• Wireless Not Working on Ubuntu 10.10

  - by Promather

  I recently bought a new HP DV6-3118SA laptop, but I am having a very discouraging problem with wireless LAN. It simply doesn't work! Could you please help me with this? EDIT: Following @Ronald and @Oli advice, I am dumping the output of lspci -k: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) Kernel driver in use: pcieport Kernel modules: shpchp 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) Subsystem: Hewlett-Packard Company Device 144a 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: i2c-i801 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: intel ips Kernel modules: intel_ips 01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: radeon Kernel modules: radeon 01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 02:00.0 Network controller: RaLink RT3090 Wireless 802.11n 1T/1R PCIe Subsystem: Hewlett-Packard Company Device 1453 Kernel driver in use: rt2800pci Kernel modules: rt2860sta, rt2800pci 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: r8169 Kernel modules: r8169 7f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a

  Read the article

• Run the system configuration once the system has been installed

  - by dierre

  Hi guys, the problem is the following. I have an old computer that mounts a SATA Dvd Burner. The old MoBo (an AsRock P4VT8+) is not able to recognize the freaking burner when booting. So I had to convert my IDE HD to USB HD and mount it on my laptop and install Ubuntu from there. The problem now is that I'm obviously getting kernel panic every now and then so I was wondering if it is possibile to rerun only the system and the hardware configuration.

  Read the article

• Ubuntu 12.04 can't detect internal mobile broadband (Gobi 2000)

  - by Anega

  Hi I have been trying Ubuntu to detect and connect using the buit in mobile broadband capability in my HP 110 netbook but until now nothing seems to work Output of lspci command: 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [AHCI mode] (rev 02) 01:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) 02:00.0 Ethernet controller: Atheros Communications Inc. AR8132 Fast Ethernet (rev c0) Output of lsusb command: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 1fea:0008 Bus 005 Device 002: ID 03f0:2a1d Hewlett-Packard Bus 001 Device 005: ID 03f0:241d Hewlett-Packard Gobi 2000 Wireless Modem (QDL mode) So far I have been trying what is intended on several pages, trying to update firmware using wine and then moving .mda or whatever files the update package GobiInstaller.mdi throws out. The results are always the same: After running Output of wine msiexec /a GobiInstaller.msi /qb TARGETDIR="c:\temp" fixme:advapi:GetCurrentHwProfileA (0x33fba8) semi-stub fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:win:RegisterDeviceNotificationA (hwnd=0x13e250, filter=0xf7e984,flags=0x00000001) returns a fake device notification handle! fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:advapi:RegisterEventSourceW ((null),L"Bonjour Service"): stub fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x79e58c,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub fixme:winsock:WSAIoctl WS_SIO_UDP_CONNRESET stub fixme:winsock:WSAIoctl -> SIO_ADDRESS_LIST_CHANGE request: stub fixme:iphlpapi:DeleteIpForwardEntry (pRoute 0x79e920): stub fixme:iphlpapi:CreateIpForwardEntry (pRoute 0x79e958): stub fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x79e58c,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub fixme:service:EnumServicesStatusW resume handle not supported fixme:service:EnumServicesStatusW resume handle not supported fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064,(nil),0x0001,0x00000000,0x79e58c,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub fixme:netapi32:NetGetJoinInformation Semi-stub (null) 0x79e644 0x79e63c fixme:winsock:WSAIoctl WS_SIO_UDP_CONNRESET stub fixme:storage:create_storagefile Storage share mode not implemented. err:msi:ITERATE_Actions Execution halted, action L"_693CD41C_A4A2_4FA1_8888_FC56C9E6E13B" returned 1603 err:rpc:I_RpcGetBuffer no binding err:rpc:I_RpcGetBuffer no binding andres@andres-HP-Mini-110-1100:~/.wine/drive_c/Qualcomm$ fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064,(nil),0x0001,0x00000000,0x79e588,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub And creates 2 empty folders, I have been trying hard and I am not sure if I am doing it the way it should be. Thanks

  Read the article

• Display Driver Issue on an hp TX2-1160ea Notebook

  - by Sam

  I'm new to Linux and recently switched to Ubuntu 11.04 due to my project requirement. My laptop has been freezing and going to black screen of death when I run anything related to display (Share desktop, stream video, etc). Today I went through the Ubuntu forum to install the appropriate graphic driver and, after doing it, I rebooted my PC. It gave an error before login saying "select the recovery mode" and after clicking OK, it didn't give the same error on reboot but I've lost the 11.04 graphical interface and all I see is the interface of Ubuntu v10 with slow visuals (even scrolling up/down on browser is really slow). For the reference, here's a desktop screenshot so that you can understand the situation. Also the laptop is overheating. How can I fix this problem? How can i get the Ubuntu 11.04 view back? I also tried Google, but couldn't find any issue like this. Some general Information: Laptop: HP TouchSmart TX2-1160ea Processor: AMD Turion TX2 Memory: 4GB OS: Ubuntu 11.04 Some debugging information:: $ report-hw | grep controller lspci -knn: 00:11.0 SATA controller [0106]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] lspci -knn: 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] lspci -knn: 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] [1002:9612] lspci -knn: 08:00.0 Network controller [0280]: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller [14e4:432b] (rev 01) lspci -knn: 09:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02) And: $ dpkg -l '*fglrx*' Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Description +++-==============-==============-============================================ ii fglrx 2:8.840-0ubunt Video driver for the ATI graphics accelerato ii fglrx-amdcccle 2:8.840-0ubunt Catalyst Control Center for the ATI graphics un fglrx-control <none> (no description available) un fglrx-control- <none> (no description available) ii fglrx-dev 2:8.840-0ubunt Video driver for the ATI graphics accelerato un fglrx-driver <none> (no description available) un fglrx-driver-d <none> (no description available) un fglrx-kernel-s <none> (no description available) un fglrx-modalias <none> (no description available) un xfree86-driver <none> (no description available) un xfree86-driver <none> (no description available) un xorg-driver-fg <none> (no description available) un xorg-driver-fg <none> (no description available) If you need any more information that could help, just ask.

  Read the article

• Black screen on login page

  - by Sulliwane

  When I startup my Ubuntu 12.04 installed on a Z77 Pro4 (ASrock motherboard), crucial M4 SSD drive (sata 3), and intel i5 3570k (ivy bridge), I get this black login screen : I also hear the ubuntu login sound "tic toc" but the screen is black, and if I type in some text, only strange characters appears (as you can see on the picture). Do you have any idea ? Thanks. ps : this is an evolution of a previous problem exposed here

  Read the article

• Mind Reading with the Raspberry Pi

  - by speakjava

  Mind Reading With The Raspberry Pi At JavaOne in San Francisco I did a session entitled "Do You Like Coffee with Your Dessert? Java and the Raspberry Pi".  As part of this I showed some demonstrations of things I'd done using Java on the Raspberry Pi.  This is the first part of a series of blog entries that will cover all the different aspects of these demonstrations. A while ago I had bought a MindWave headset from Neurosky.  I was particularly interested to see how this worked as I had had the opportunity to visit Neurosky several years ago when they were still developing this technology.  At that time the 'headset' consisted of a headband (very much in the Bjorn Borg style) with a sensor attached and some wiring that clearly wasn't quite production ready.  The commercial version is very simple and easy to use: there are two sensors, one which rests on the skin of your forehead, the other is a small clip that attaches to your earlobe. Typical EEG sensors used in hospitals require lots of sensors and they all need copious amounts of conductive gel to ensure the electrical signals are picked up.  Part of Neurosky's innovation is the development of this simple dry-sensor technology.  Having put on the sensor and turned it on (it powers off a single AAA size battery) it collects data and transmits it to a USB dongle plugged into a PC, or in my case a Raspberry Pi. From a hacking perspective the USB dongle is ideal because it does not require any special drivers for any complex, low level USB communication.  Instead it appears as a simple serial device, which on the Raspberry Pi is accessed as /dev/ttyUSB0.  Neurosky have published details of the command protocol.  In addition, the MindSet protocol document, including sample code for parsing the data from the headset, can be found here. To get everything working on the Raspberry Pi using Java the first thing was to get serial communications going.  Back in the dim distant past there was the Java Comm API.  Sadly this has grown a bit dusty over the years, but there is a more modern open source project that provides compatible and enhanced functionality, RXTXComm.  This can be installed easily on the Pi using sudo apt-get install librxtx-java.  Next I wrote a library that would send commands to the MindWave headset via the serial port dongle and read back data being sent from the headset.  The design is pretty simple, I used an event based system so that code using the library could register listeners for different types of events from the headset.  You can download a complete NetBeans project for this here.  This includes javadoc API documentation that should make it obvious how to use it (incidentally, this will work on platforms other than Linux.  I've tested it on Windows without any issues, just by changing the device name to something like COM4). To test this I wrote a simple application that would connect to the headset and then print the attention and meditation values as they were received from the headset.  Again, you can download the NetBeans project for that here. Oracle recently released a developer preview of JavaFX on ARM which will run on the Raspberry Pi.  I thought it would be cool to write a graphical front end for the MindWave data that could take advantage of the built in charts of JavaFX.  Yet another NetBeans project is available here.  Screen shots of the app, which uses a very nice dial from the JFxtras project, are shown below. I probably should add labels for the EEG data so the user knows which is the low alpha, mid gamma waves and so on.  Given that I'm not a neurologist I suspect that it won't increase my understanding of what the (rather random looking) traces mean. In the next blog I'll explain how I connected a LEGO motor to the GPIO pins on the Raspberry Pi and then used my mind to control the motor!

  Read the article

• Fan not detected by lm-sensors

  - by OrangeTux

  My fan is blowing hard, while my cpu temperature is 32 degrees I tried a lot of things to control my fan. Changed grub file GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi= pci=noacpi" _ GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi=\"Linux\"" Ran sensors-detect : To load everything that is needed, add this to /etc/modules: #----cut here---- # Chip drivers coretemp #----cut here---- If you have some drivers built into your kernel, the list above will contain too many modules. Skip the appropriate ones! Do you want to add these lines automatically to /etc/modules? (yes/NO) Unloading i2c-dev... OK Unloading i2c-i801... OK Unloading cpuid... OK Ran sensors: acpitz-virtual-0 Adapter: Virtual device temp1: +34.0°C (crit = +90.0°C) coretemp-isa-0000 Adapter: ISA adapter Core 0: +34.0°C (high = +80.0°C, crit = +90.0°C) Core 2: +34.0°C (high = +80.0°C, crit = +90.0°C) Ran sudo start module-init-tools and sudo start module-init-tools module-init-tools stop/waiting As you can see my fan isn't detected. Running fancontrol gives me this: Loading configuration from /etc/fancontrol ... Error: Can't read configuration file Can you help me, please? I cannot use my laptop now in class. Thanks in advance. My system 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) 01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5400 Series] 01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02) 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) 7f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05) 7f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05) 7f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05) 7f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05) 7f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05) 7f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05)

  Read the article

• Cannot bootup windows 7 after upgrading to ubuntu 12.04

  - by dhaval

  I have tried boot-repair grub-update bootrec commands booting into safe mode with command prompt gets stuck with classpnp.sys file changing sata options in bios etc but windows keep throwing the STOP error /blue screen. Heres details from boot-repair http://paste.ubuntu.com/5804023/ I have updated ubunto from 10.x to 12.x and have lost a day with no productive work heres a screenshot of the blue screen

  Read the article

• How to recognize an optimus laptop?

  - by kellogs

  kellogs@kellogs-K52Jc ~ $ lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 03:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 80) 03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 80) 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 80) 03:00.4 System peripheral: JMicron Technology Corp. xD Host Controller (rev 80) 03:00.5 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 03) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05) kellogs@kellogs-K52Jc ~ $ inxi -SGx System: Host: kellogs-K52Jc Kernel: 3.5.0-17-generic x86_64 (64 bit, gcc: 4.7.2) Desktop: KDE 4.9.5 (Qt 4.8.3) Distro: Linux Mint 14 Nadia Graphics: Card: Intel Core Processor Integrated Graphics Controller bus-ID: 00:02.0 X.Org: 1.13.0 drivers: intel (unloaded: fbdev,vesa) Resolution: [email protected] GLX Renderer: Mesa DRI Intel Ironlake Mobile GLX Version: 2.1 Mesa 9.0.3 Direct Rendering: Yes kellogs@kellogs-K52Jc ~ $ lshw [...] *-display description: VGA compatible controller product: Core Processor Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 18 width: 64 bits clock: 33MHz capabilities: vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:44 memory:d0000000-d03fffff memory:c0000000-cfffffff ioport:e080(size=8) Manufacturer advertises the K52Jc model which I bought as optimus enabled. However, no traces of it in the output above. Of course, Bumblebee would not start on this machine. Should I rest assured that is a defective / un-optimused machine ?

  Read the article

• Ikoula : les serveurs Green Fish et Crazy Fish gagnent en espace de stockage, que pensez-vous des serveurs dédiés de l'hébergeur ?

  Ikoula : les serveurs Green Fish et Crazy Fish gagnent en espace de stockage que pensez-vous des serveurs dédiés de l'hébergeur ?L'espace de stockage, les performances et le cout sont des aspects clés lorsqu'un développeur, administrateur ou tout autre professionnel de l'IT se lance dans la location d'un serveur pour ses travaux.Ikoula, tout en maintenant la même grille de prix, fait évoluer ses offres de serveurs Green Fish et Crazy Fish avec l'introduction d'un disque dur d'1 To SATA, contre...

  Read the article

• The Alienware M11xR3 has arrived

  - by Enrique Lima

  A week or so ago, I mentioned my gear was evolving.  The newest member of my gear arrived yesterday, an Alienware M11xR3. Here are the specs: Intel Core i7-2617M 1.5GHz (2.6GHz Turbo Mode, 4MB Cache) NVIDIA GeForce GT540 graphics with 2.0GB Video Memory and Optimus 16GB Dual Channel DDR3 at 1333MHz 11.6in High Def (720p/1366x768) with WLED backlight 750GB 7200RPM SATA 3Gb/s Soundblaster X-Fi Hi Def Audio - Software Enabled Intel Advanced-N WiFi Link 6250 a/g/n 2x2 MIMO Technology with WiMax Gobi Mobile Broadband with GPS - supports ATT with contract Internal Bluetooth 3.0   Some pics from the unboxing event:

  Read the article

• nvidia optimus laptops

  - by kellogs

  kellogs@kellogs-K52Jc ~ $ lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 03:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 80) 03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 80) 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 80) 03:00.4 System peripheral: JMicron Technology Corp. xD Host Controller (rev 80) 03:00.5 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 03) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05) kellogs@kellogs-K52Jc ~ $ inxi -SGx System: Host: kellogs-K52Jc Kernel: 3.5.0-17-generic x86_64 (64 bit, gcc: 4.7.2) Desktop: KDE 4.9.5 (Qt 4.8.3) Distro: Linux Mint 14 Nadia Graphics: Card: Intel Core Processor Integrated Graphics Controller bus-ID: 00:02.0 X.Org: 1.13.0 drivers: intel (unloaded: fbdev,vesa) Resolution: [email protected] GLX Renderer: Mesa DRI Intel Ironlake Mobile GLX Version: 2.1 Mesa 9.0.3 Direct Rendering: Yes Manufacturer advertises the K52Jc model which I bought as optimus enabled. However, no traces of it in the output above. Of course, Bumblebee would not start on this machine. Should I rest assured that is a defective / un-optimused machine ? thanks

  Read the article

• How can I install Ubuntu on a Compaq DC7900?

  - by lemba

  I have an HP Compaq dc7900 Convertible Minitower from 2006: 80GB (3.5”) SATA 3.0GB/s with NCQ and Smart IV Intel Core 2 Duo E8500 I can install Ubuntu on it from a USB stick and everything seems to work fine, but when I finish and reboot the pc, grub will be shown but When I continue I get just a black screen with a blinking cursor I tried Linux Mint and OpenSuse as well but it seems there is something forbidden in the Bios. Installing Windows 8 works fine.

  Read the article

• RAID 10 not being found by installer

  - by dko

  I had ubuntu installed with raid 0 enabled. I have added 2 more disks went into the bios deleted and created a new raid setup using raid 10 (total of 4 disks now). However during install of ubuntu server it asks if it should activate the RAID Sata disks, I tell it yes. Next step shows up blank for available disks when determining where to mount the root etc. Anyone have a clue as to why this would be?

  Read the article

• 12.04, and 13.10 slower than xp on Lenovo thinkpad R61e. Any bloatware to remove?

  - by Alex

  My mom's Laptop is running really slow with 12.04 and 13.10 right after installation. ubuntu claims it should run nice and smoothly for the hardware thats on it. Lenovo ThinkPad R61e: CPU - Pentium Dual Core t2370 1.73ghz x 2 Ram - 1GB DDR2 667mhz GPU - intel 965gm x86/mmx/sse2 HDD - 80gb sata i tried hardware tests and they fail right that the very beginning of the testing. it does the same for bootable hardware tests (on a cd or usb) Is there any bloatware that can be removed that common windows users would never use?

  Read the article

• Review: VIA M'SERV: the Perfect Linux Box?

  Take a small box. Add a 64-bit CPU, two SATA hard drives, a Compact Flash slot, dual Gigabit Ethernet, and quiet operation, and what do you have? The VIA M'SERV mini-server. Could this be the perfect Linux box?

  Read the article

• VIA M'SERV: the Perfect Little Linux Box?

  <b>Linux Planet:</B> "Take a small box. Add a 64-bit CPU, two SATA hard drives, a Compact Flash slot, dual Gigabit Ethernet, and quiet operation, and what do you have? The VIA M'SERV mini-server. Could this be the perfect Linux box?"

  Read the article

• How to reinstall Ubuntu keeping my data intact?

  - by explorex

  Hi, I want to reinstall Ubuntu keeping my data intact. I have 160 GB hardrive (sata or pata I don't know but it's slim and made in China) with a 40 GB ext3 partition, a 4GB swap memory and 3 other partition with a FAT32 file system. I have around 4GB space on my drive where Linux is installed. I'd like to keep the data intact, especially the Downloads folder, desktop, and /var/www; And I no longer have access to any other machines or external storage devices.

  Read the article

• how to use gparted to partion 2 drives as 1

  - by user281745

  I have my lenovo t43 and I have a SATA extra HD drive instead of the CD drive and I have in it a 250 GB hard drive and in my HD caddy I have a 40 GB hard drive I would like to use gparted to partition these 2 drives as 1 i would like to have the 250 GB as a extended part of the 40 GB cause i already have Ubuntu Installed on it, they are right now not side by side im not sure how to do this so please list by step by step thank you http://imgur.com/dE0B7dy,qRRPgoB http://imgur.com/dE0B7dy,qRRPgoB#1

  Read the article

• Analyzing I/O performance in Linux

  <b>cmdln.org:</b> "Monitoring and analyzing performance is an important task for any sysadmin. Disk I/O bottlenecks can bring applications to a crawl. What is an IOP? Should I use SATA, SAS, or FC? How many spindles do I need?"

  Read the article

• Does O2Micro Oz776 Smartcard reader support SLE5528 cards?

  - by Proton

  Well, the title seems indicating I'm a lazy guy but it's not the truth... I'm messing with this weird circumstance a whole day. My laptop is a Dell Latitude D630 which has a Oz776 (usb idVendor == 0x0b97, idProduct == 0x7772) smartcard reader, but I'm not sure if it is functioning well. It can successfully recognize my Gemplus GPK4000 smartcard and my SIM card, but not SLE5528. This is my pcscd log when insert the GPK4000: 06039271 ifdhandler.c:1043:IFDHPowerICC() action: PowerUp, usb:0b97/7772:libhal:/org/freedesktop/Hal/devices/usb_device_b97_7772_noserial_if0 (lun: 0) 00000100 - 000000 62 00 00 00 00 00 14 01 00 00 00967744 <- 000000 80 0A 00 00 00 00 14 00 00 00 3B 27 00 80 65 A2 0C 01 01 37 00000048 ATR: 3B 27 00 80 65 A2 0C 01 01 37 00000013 atrhandler.c:102:ATRDecodeAtr() Conv: 01, Y1: 02, K: 07 00000011 atrhandler.c:120:ATRDecodeAtr() TA1: FFFFFFFF, TB1: 00, TC1: FFFFFFFF, TD1:FFFFFFFF 00000011 atrhandler.c:248:ATRDecodeAtr() CurrentProtocol: 1, AvailableProtocols: 1 00000062 eventhandler.c:429:EHStatusHandlerThread() Card inserted into O2 Micro Oz776 00 00 00000014 Card ATR: 3B 27 00 80 65 A2 0C 01 01 37 29016873 eventhandler.c:361:EHStatusHandlerThread() Card Removed From O2 Micro Oz776 00 00 This is the log when insert a SLE5528 card: 99999999 ifdhandler.c:1043:IFDHPowerICC() action: PowerUp, usb:0b97/7772:libhal:/org/freedesktop/Hal/devices/usb_device_b97_7772_noserial_if0 (lun: 0) 00000048 - 000000 62 00 00 00 00 00 11 01 00 00 ** Then it chokes here, when I remove the card, the log continues ** 04741980 <- 000000 80 00 00 00 00 00 11 42 FE 00 00000044 commands.c:225:CmdPowerOn Card absent or mute 00000017 ifdhandler.c:1096:IFDHPowerICC() PowerUp failed 00000082 eventhandler.c:429:EHStatusHandlerThread() Card inserted into O2 Micro Oz776 00 00 00000021 eventhandler.c:443:EHStatusHandlerThread() Error powering up card. 00402818 eventhandler.c:361:EHStatusHandlerThread() Card Removed From O2 Micro Oz776 00 00 I found that SLE5528 is ISO7816 compatible, and it should have ATR, but it just chokes at the PowerUp. When inserted any PVC card with no chip or AT24C01 card, it would not choke but report immediate PowerUp failure. When I tried it on Windows(Windows 7, "runas other user", smartcard login), it chokes too while PVC cards and AT24C01 report immediate failure.

  Read the article

• Using child visitor in C#

  - by Thomas Matthews

  I am setting up a testing component and trying to keep it generic. I want to use a generic Visitor class, but not sure about using descendant classes. Example: public interface Interface_Test_Case { void execute(); void accept(Interface_Test_Visitor v); } public interface Interface_Test_Visitor { void visit(Interface_Test_Case tc); } public interface Interface_Read_Test_Case : Interface_Test_Case { uint read_value(); } public class USB_Read_Test : Interface_Read_Test_Case { void execute() { Console.WriteLine("Executing USB Read Test Case."); } void accept(Interface_Test_Visitor v) { Console.WriteLine("Accepting visitor."); } uint read_value() { Console.WriteLine("Reading value from USB"); return 0; } } public class USB_Read_Visitor : Interface_Test_Visitor { void visit(Interface_Test_Case tc) { Console.WriteLine("Not supported Test Case."); } void visit(Interface_Read_Test_Case rtc) { Console.WriteLine("Not supported Read Test Case."); } void visit(USB_Read_Test urt) { Console.WriteLine("Yay, visiting USB Read Test case."); } } // Code fragment USB_Read_Test test_case; USB_Read_Visitor visitor; test_case.accept(visitor); What are the rules the C# compiler uses to determine which of the methods in USB_Read_Visitor will be executed by the code fragment? I'm trying to factor out dependencies of my testing component. Unfortunately, my current Visitor class contains visit methods for classes not related to the testing component. Am I trying to achieve the impossible?

  Read the article

< Previous Page | 140 141 142 143 144 145 146 147 148 149 150 151  | Next Page >