Search Results

Search found 5749 results on 230 pages for 'miles away'.

Page 145/230 | < Previous Page | 141 142 143 144 145 146 147 148 149 150 151 152  | Next Page >

• Unit Testing TSQL

  - by Grant Fritchey

  I went through a period of time where I spent a lot of effort figuring out how to set up unit tests for TSQL. It wasn't easy. There are a few tools out there that help, but mostly it involves lots of programming. well, not as much as before. Thanks to the latest Down Tools Week at Red Gate a new utility has been built and released into the wild, SQL Test. Like a lot of the new tools coming out of Red Gate these days, this one is directly integrated into SSMS, which means you're working where you're comfortable and where you already have lots of tools at your disposal. After the install, when you launch SSMS and get connected, you're prompted to install the tSQLt example database. Go for it. It's a quick way to see how the tool works. I'd suggest using it. It' gives you a quick leg up. The concepts are pretty straight forward. There are a series of CLR commands that you use to configure a test and the test assertions. In between you're calling TSQL, either calls to your structure, queries, or stored procedures. They already have the one things that I always found wanting in database tests, a way to compare tables of results. I also like the ability to create a dummy copy of tables for the tests. It lets you control structures and behaviors so that the tests are more focused. One of the issues I always ran into with the other testing tools is that setting up the tests might require potentially destructive changes to the structure of the database (dropping FKs, etc.) which added lots of time and effort to setting up the tests, making testing more difficult, and therefor, less useful. Functionally, this is pretty similar to the Visual Studio tests and TSQLUnit tests that I used to use. The primary improvement over the Visual Studio tests is that I'm working in SSMS instead of Visual Studio. The primary improvement over TSQLUnit is the SQL Test interface it self. A lot of the functionality is the same, but having a sweet little tool to manage & run the tests from makes a huge difference. Oh, and don't worry. You can still run these tests directly from TSQL too, so automation has not gone away. I'm still thinking about how I'd use this in a dev environment where I also had source control to fret. That might be another blog post right there. I'm just getting started with SQL Test, so this is the first of several blog posts & videos. Watch this space. Try the tool.

  Read the article

• Merge Join component sorted outputs [SSIS]

  - by jamiet

  One question that I have been asked a few times of late in regard to performance tuning SSIS data flows is this: Why isn’t the Merge Join output sorted (i.e.IsSorted=True)? This is a fair question. After all both of the Merge Join inputs are sorted, hence why wouldn’t the output be sorted as well? Well here’s a little secret, the Merge Join output IS sorted! There’s a caveat though – it is only under certain circumstances and SSIS itself doesn’t do a good job of informing you of it. Let’s take a look at an example. Here we have a dataflow that consumes data from the [AdventureWorks2008].[Sales].[SalesOrderHeader] & [AdventureWorks2008].[Sales].[SalesOrderDetail] tables then joins them using a Merge Join component: Let’s take a look inside the editor of the Merge Join: We are joining on the [SalesOrderId] field (which is what the two inputs just happen to be sorted upon). We are also putting [SalesOrderHeader].[SalesOrderId] into the output. Believe it or not the output from this Merge Join component is sorted (i.e. has IsSorted=True) but unfortunately the Merge Join component does not have an Advanced Editor hence it is hidden away from us. There are a couple of ways to prove to you that is the case; I could open up the package XML inside the .dtsx file and show you the metadata but there is an easier way than that – I can attach a Sort component to the output. Take a look: Notice that the Sort component is attempting to sort on the [SalesOrderId] column. This gives us the following warning: Validation warning. DFT Get raw data: {992B7C9A-35AD-47B9-A0B0-637F7DDF93EB}: The data is already sorted as specified so the transform can be removed. The warning proves that the output from the Merge Join is sorted! It must be noted that the Merge Join output will only have IsSorted=True if at least one of the join columns is included in the output. So there you go, the Merge Join component can indeed produce a sorted output and that’s very useful in order to avoid unnecessary expensive Sort operations downstream. Hope this is useful to someone out there! @Jamiet  P.S. Thank you to Bob Bojanic on the SSIS product team who pointed this out to me!

  Read the article

• Great opportunity to try Windows Azure over the next 7 days if you are a UK developer &ndash; act to

  - by Eric Nelson

  Are you a UK based developer who has been put off from trying out the Windows Azure Platform? Were you concerned that you needed to hand over credit card details even to use the introductory offer? Or concerned about how many charges you might run up as you played with “elastic computing”. Then we might have just what you need. 7 Days of access to the Windows Azure Platform – for FREE (expires June 6th 2010) If you are accepted, you will be given a Windows Azure Platfom subscription that will enable you to create Windows Azure hosted services and storage accounts, SQL Azure databases and AppFabric services without any fear of being charged between now and Sunday the 6th of June 2010. No credit card is required. Important: At the end of Sunday your subscription and all your code and data you have uploaded will be deleted. It is your responsibility to keep local copies of your code and data. Apply now To apply for this offer you need to: email ukdev AT microsoft.com with a subject line that starts “UKAZURETRAIL:” (This must  be present) In the email you need to demonstrate you are UK based (.uk email alias or address or… be creative) And you must include 30 to 100 words explaining What your interest is in the Windows Azure Platform and Cloud Computing What you would use the 7 days to explore Some notes (please read!): We have a limited number of these offers to give away on a first come, first served basis (subject to meeting the above criteria). We plan to process all request asap – but there is a UK bank holiday weekend looming. We will do our best to process all by Tues afternoon (which would still give you 5 days of access) There will be no specific support for this offer. We will not be processing any requests that arrive after Tuesday 1st. In case you were wondering, there is no equivalent offer for developer outside of the UK. This offer is a direct result of UK based training we are currently doing which has some spare Azure capacity which we wanted to make best use of. Sorry in advance if you based outside of the UK. Related Links: If you are UK based, you should also join the UK Windows Azure Platform community http://ukazure.ning.com Microsoft UK Windows Azure Platform page

  Read the article

• 25 reasons to attend JavaOne 2012

  - by arungupta

  17th JavaOne is just around the corner, less than 3 weeks away! If you are still thinking about registering for the conference, here are my top 25 reasons to attend the conference: Biggest gathering of Java geeks in the world Latest and greatest content with 475 technical sessions/Birds of Feathers/Hands-on labs sessions (about 20% more from last year) Reduced number of keynotes to accommodate room for more technical content No product pitches, exclusive focus on technology (I can tell you that from my experience as a track lead) Sessions are divided in different in-depth technical tracks to focus on Java technology that most interests you Reruns of several popular sessions Experts and Practitioners-led HOLs and tutorials Rock star speakers, panelists, faculties, and instructors. Meet several Java Champions and JUG leaders from all around the world Engage with speakers and discuss with fellow developers in a casual setting with lots of networking space A complete conference dedicated for Java Embedded Extensive and fast-paced hands-on University Sessions on Sunday, learn while you are at the conference. You can register for Java University only or attend with the conference. Dukes Choice Awards recognize and celebrate the most innovative usage of the Java platform DEMOgrounds and Exhibition Hall provide extensive opportunities for networking and engagement with the biggest names in Java (dedicated hours on each day as well) Dedicated day for Java User Groups and Communities (GlassFish Community Event and NetBeans Community Day) Multiple registration packages to meet your needs Pay for 4 full conference passes and get a fifth one free Students and Bloggers get a free pass Geek Bike Ride with fellow speakers and attendees in a casual setting Greenest conference on the plane Enjoy different cuisines in the San Francisco city, take a trip to Alcatraz or Napa Valley or go running on the crooked street ;-) There are tons of tourist opportunities in/around San Francisco. Tons of parties during the conference, in the evening, late night, and early mornings. Don't forget Thirsty Bear Party! Pearl Jam and Kings of Leon at Appreciation Party Oracle Music Festival at Yerba Buena Gardens Grab the bragging rights "I have attended JavaOne"! Learn a new skill, build new connections, conceive a new idea and push the boundaries of Java in the most important educational and networking event of the year for Java developers and enthusiasts. With so much geekgasm going on during the 5 days of JavaOne, is there a reason for you to wait ? Register for the conference now! Grab your buttons, banners, and other collateral at JavaOne Toolkit. You can also send an email to [email protected]. And reach out to us using different social media channels ... As a 13 year veteran of the conference, I can tell this is some thing every Java developer must experience! I will be there, will you ?

  Read the article

• Are SQL Injection vulnerabilities in a PHP application acceptable if mod_security is enabled?

  - by Austin Smith

  I've been asked to audit a PHP application. No framework, no router, no model. Pure PHP. Few shared functions. HTML, CSS, and JS all mixed together. I've discovered numerous places where SQL injection would be easily possible. There are other problems with the application (XSS vulnerabilities, rampant inline CSS, code copy-pasted everywhere) but this is the biggest. Sometimes they escape inputs, not using a prepared query or even mysql_real_escape_string(), mind you, but using addslashes(). Often, though, their queries look exactly like this (pasted from their code but with columns and variable names changed): $user = mysql_query("select * from profile where profile_id='".$_REQUEST["profile_id"]."'"); The developers in question claimed that they were unable to hack their application. I tried, and found mod_security to be enabled, resulting in HTTP 406 for some obvious SQL injection attacks. I believe there to be sophisticated workarounds for mod_security, but I don't have time to chase them down. They claim that this is a "conceptual" matter and not a "practical" one since the application can't easily be hacked. Their internal auditor agreed that there were problems, but emphasized the conceptual nature of the issues. They also use this conceptual/practical argument to defend against inline CSS and JS, absence of code organization, XSS vulnerabilities, and massive amounts of repetition. My client (rightly so, perhaps) just wants this to go away so they can launch their product. The site works. You can log in, do what you need to do, and things are visibly functional, if slow. SQL Injection would indeed be hard to do, given mod_security. Further, their talk of "conceptual vs. practical" is rhetorically brilliant, considering that my client doesn't understand web application security. I worry that they've succeeded in making me sound like an angry puritan. In many ways, this is a problem of politics, not technology, but I am at a loss. As a developer, I want to tell them to toss the whole project and start over with a new team, but I face a strong defense from the team that built it and a client who really needs to ship their product. Is my position here too harsh? Even if they fix the SQL Injection and XSS problems can I ever endorse the release of an unmaintainable tangle of spaghetti code?

  Read the article

• Database Mirroring – deprecated

  - by fatherjack

  Do you use mirroring on any of your databases? Do you use mirroring on SQL Server Standard Edition? I do, as a way of having a stand-by server ready to take over if there is a problem with the live server so that business can continue despite whatever disaster may strike at our primary server location. In my experience it has been a great solution for us as it is simple to implement, reliable and predictable. Mirroring has been around since SQL Server 2005 sp1 but with the release of SQL Server 2012 mirroring has now been placed on the deprecation list. That’s right, Microsoft are removing this feature from SQL Server. SQL Server 2012 had lots of improvements and new features around this sort of technology – the High Availability, Disaster recovery and Always On features described in detail here by Brent Ozar and  Microsoft’s own Customer Service and Support SQL Server Engineers . Now the bad news, the HADRON features are pretty much all wrapped up in the Enterprise Edition of SQL Server 2012. This is going to be a big issue for people, like me, who are only on Standard Edition of earlier versions mostly due to our requirements and the budget (or lack thereof) required for Enterprise Edition licenses. No mirroring in Standard Edition means no upgrade. Don’t Panic. There are two stages of deprecation and they dont happen fast. The first stage – Deprecation Announcement- means that Microsoft have decided that there is a limited future for a particular feature and this is your cue that new projects and developments should not be implemented on this technology as it will cease to exist in the future. This is where mirroring currently stands. You have time to consider your options and start work on planning how you will move away from using this feature. This can be 2 or 3 versions of SQL Server, possibly more. The next stage is Deprecation Final Support - this is where you are on your last chance, When you see this then the next version of SQL Server will not have this feature in it so you need to implement your plans to move to an alternative solution. While these two phases are taking place Microsoft are open to feedback on how people use their products and if enough people make the case for mirroring (or an equivalent technology) to be in the Standard Edition then they may make changes rather than lose customers or have customers cease upgrading in order to keep the functionality they need. Denny Cherry (@MrDenny) has published an article on this same topic here with more detail than me so I wont go over old ground. All I will say is that you should read his article now and then follow the link to his own site where he is collecting peoples information on how they use mirroring in Standard Edition so that our voice can be put to Microsoft.  

  Read the article

• Memory Glutton

  - by AreYouSerious

  I have to admit that I can't get enough storage. I have hard drives just sitting around in case I need to move somthing, or I'm going to a friends and either they want something I have or I want something they might have. What I'm going to talk about today is cost effective memory for devices. I don't know how this particualr device will work in a camera, as That's not what I use in my camera, in fact I don't have a camera that doesn't either use SD, or the old compact flash card, that's not so compact anymore. There's this thing that uses two micro sd cards to double the capacity of your memory, and it costs about 4 bucks, without the Micro SD card. I have had one for about a year and was going to throw it away because I couldn't get it to work with my computer, or with my Sony Reader. However I found out by one last ditch effort that this thing works beautifully with my Sony PSP. there is no software to speak of associated with this thing, you simply put in two SD cards of the same size... (if you put in two different sizes it will still work, you'll only double the smallest cards size though) and format through the psp. Viola you know have a 29 GB memory card for your PSP. why is this important ? well for starters you can carry more music and more videos. Second if you have gone the way of the hacker.... you can store more games on your card... There are just a few things you have to note.... I speak from experience... you have to use the usb connection to the PSP to do any file moving, as I said previously said card doesn't play well with my computers or card readers... I not saying it won't work at all, just hasn't work with anything I own. Second. If for some reason you try to Hack/crack your PSP don't attempt to delete a game from the psp, use the usb file browser to remove games. if you delete from the PSP you are likely to have to move all your files off, reformat and start again... just a couple things I have noticed... if I had done something like that.   anyway, Here's a link.... http://www.photofast-adapter.com/  and if you want to buy one, get it off ebay, I've seen them as low as $1.99

  Read the article

• Getting Started with Kinect for Windows.

  - by Vishal

  Hello folks,      Recently I got involved in a project for building a demo application for one of our customers with Kinect for Windows. Yes, something similar what Tom Cruise did in the movie Minority Report. Waving arms, moving stuff around, swipes, speech recognition, manipulating computer screens without even touching it. Pretty cool!!! The idea in the movie showed us how technology would be after 50 years from that day.   Minority Report Movie clip.           Well, that 50 years of time frame got squeezed and recently on Feb 1st 2012, Microsoft released the official Kinect for Windows SDK. That’s just 10 years from the movie release. Although, the product is in it early stages but with developer creativity and continuously improving hardware, those features shown in the movie are not very far away from becoming a reality. Soon after releasing the SDK, Microsoft again announced in March the release of its new Kinect for Windows SDK version 1.5 which is coming out in sometime May. More history about Kinect. Anyways, so for a newbie with Kinect, where would you start. Here is what I would suggest you can do. Watch the Kinect for Windows Quick start Series by Den Fernandez. Download the Kinect for Windows SDK and start playing around with the demos in it. It also comes with some basic Kinect documentation. Coding4Fun Kinect Projects | Lot many more videos and open sources projects information. Kinect for Windows Session at Techdays NL demo by Jesus Rodriguez. Book: Beginning Kinect Programming with the Microsoft Kinect SDK.  | I did go through few of the chapters in this book and based on that, it does talk deeply about core Kinect concepts but in very easy to understand way. I would definitely suggest this book for any Kinect developers. I liked the way it explained the Gestures recognition in Chapter 6. Buy your Kinect device from either Amazon or NewEgg. You will get it cheaper then buying it from Microsoft Store. Personally, I love Newegg.com as I never had any order related or shipping issues with them. I always hate developing UI application but well, you would need to get your hands dirty with WPF too in order to work with Kinect. So get started with WPF concepts too. I will keep adding stuff to the list once I come across them but so far the above list would definitely get you started building your first Kinect apps. Till then Happy Kinecting…!!!!! Thanks, Vishal Mody

  Read the article

• The Case for Complimentary Software Copies

  - by GGBlogger

  As the Geriatric Geek you can understand that I’ve been writing and studying for over 60 years. That means that I’ve seen insane changes in the computer software industry. I’ve made the joke that I get a new college education every 6 months or so. Of course that’s an exaggeration but it doesn’t make the feeling go away. I have a long standing and strong relationship with Microsoft so I’m armed with virtually every tool they make. It also means that I have access to tons of training material. But here’s the rub… Last year I started a definitive read of Professional Visual Basic 2008. The purpose was to fill in holes in my understanding of various things. I’m currently on page 1119 of some 1400 pages. During this sojourn I’ve decided that the future is web related which is to say that the future of “thick client” applications running as Windows applications is likely to slowly disappear. To that end I’ve taken a side trip or two into the world of ASP (including XML), Silverlight and cloud development. After carefully avoiding (that’s tongue in cheek) XML for years I finally had to bite the bullet, so to speak, and start learning XML in earnest. The most recent result of that was trail downloads of Altova’s MissionKit 2010 for Software Architects and Liquid Technologies Liquid XML Studio Developer Edition. These are both beautiful products and I want to learn them and write about them. Now comes the rub… While 30 day evaluations are generous in allowing casual users to assess these technologies for purchase they are NOT long enough to allow an author to evaluate, learn and ultimately write about them. Even if I devoted the full 30 days to learning, using and writing about say Altova’s suite I wouldn’t have enough time. Liquid XML may be a little easier to learn (one product as opposed to 8).  Add to that the fact that I frequently get sidetracked to add to my kit and it really blows out. It can be extremely frustrating when I’ve devoted hours to a project and suddenly discover that to complete it I will either need to purchase a license or abandon the project. Since my life blood does not depend on the product I end up abandoning the project and moving on. So to the folks from whom I request complimentary copies… I guarantee that if I convert your product to doing paid development work I will purchase a license to do that but as long as I am using your product to study for the purpose of writing samples, teaching use or otherwise promoting your product to other paying customers I will ask that you give me a license so that I can do that without facing the dread expiration of a 30 day trial.

  Read the article

• Ubuntu 10.10 forgets desktop theme.

  - by Marcelo Cantos

  (I posed this question on superuser.com and haven't received any answers or comments, then I came across this site, so my apologies to anyone who has seen this already.) I am running Ubuntu in VirtualBox (on a Windows 7 host). Several times now, the top-level menu bar, the task bar — and seemingly every system dialog — have forgotten the out-of-the-box "Ambiance" theme they conform to when I first installed the system. Window captions still preserve the theme, but pretty much nothing else does. I have searched high and low on Google for assistance with this problem. Everything I've found suggests either running some gconf reset or deleting .gconf* .gnome* and other similar directories. I have followed all this advice and nothing works. I still get a boring Windows-95-style gray 3D look and feel. On previous occasions, after much messing around I've given up and rebooted the VM instance, and been pleasantly suprised to see the original "Ambience" theme restored throughout the UI, but invariably it disappears again some time later, usually after a reboot, so I can never figure out what I did that broke it. Here's a sample from Ubuntu's site of what I want it to look like. And here's a screenshot of my system as it currently looks. Also note that my GNOME Terminals normally have a nice purple semi-translucent look, and as can be seen from the screenshot, they are now just a solid matt white. This last time (just yesterday), trying numerous combinations all the usual tricks and rebooting several times hasn't fixed it, so here I am on SU wondering: How do I recover the out-of-the-box theme for my Gnome/Ubuntu desktop, noting that blowing away all config files — as suggested in many places online — fails to achieve this? It might help to know that it seems to fail either after I resize the VM instance, forcing the Ubuntu desktop to resize itself, or after I play around with Compiz settings. I haven't been able to figure out which of these it is, and it could be neither. Given the amount of pain I have had to go through to get things back to normal (and given that I am at a loss as to how to do so), it has proven difficult to definitively isolate the cause.

  Read the article

• PCF shadow shader math causing artifacts

  - by user2971069

  For a while now I used PCSS for my shadow technique of choice until I discovered a type of percentage closer filtering. This method creates really smooth shadows and with hopes of improving performance, with only a fraction of texture samples, I tried to implement PCF into my shader. This is the relevant code: float c0, c1, c2, c3; float f = blurFactor; float2 coord = ProjectedTexCoords; if (receiverDistance - tex2D(lightSampler, coord + float2(0, 0)).x > 0.0007) c0 = 1; if (receiverDistance - tex2D(lightSampler, coord + float2(f, 0)).x > 0.0007) c1 = 1; if (receiverDistance - tex2D(lightSampler, coord + float2(0, f)).x > 0.0007) c2 = 1; if (receiverDistance - tex2D(lightSampler, coord + float2(f, f)).x > 0.0007) c3 = 1; coord = (coord % f) / f; return 1 - (c0 * (1 - coord.x) * (1 - coord.y) + c1 * coord.x * (1 - coord.y) + c2 * (1 - coord.x) * coord.y + c3 * coord.x * coord.y); This is a very basic implementation. blurFactor is initialized with 1 / LightTextureSize. So the if statements fetch the occlusion values for the four adjacent texels. I now want to weight each value based on the actual position of the texture coordinate. If it's near the bottom-right pixel, that occlusion value should be preferred. The weighting itself is done with a simple bilinear interpolation function, however this function takes a 2d vector in the range [0..1] so I have to convert my texture coordinate to get the distance from my first pixel to the second one in range [0..1]. For that I used the mod operator to get it into [0..f] range and then divided by f. This code makes sense to me, and for specific blurFactors it works, producing really smooth one pixel wide shadows, but not for all blurFactors. Initially blurFactor is (1 / LightTextureSize) to sample the 4 adjacent texels. I now want to increase the blurFactor by factor x to get a smooth interpolation across maybe 4 or so pixels. But that is when weird artifacts show up. Here is an image: Using a 1x on blurFactor produces a good result, 0.5 is as expected not so smooth. 2x however doesn't work at all. I found that only a factor of 1/2^n produces an good result, every other factor produces artifacts. I'm pretty sure the error lies here: coord = (coord % f) / f; Maybe the modulo is not calculated correctly? I have no idea how to fix that. Is it even possible for pixel that are further than 1 pixel away?

  Read the article

• How To: Spell Check InfoPath web form in SharePoint 2010

  - by Jeremy Ramos

  Originally posted on: http://geekswithblogs.net/JeremyRamos/archive/2013/11/07/how-to-spell-check-infopath-web-form-in-sharepoint-2010.aspxThis is a sequel to my 2011 post about How To: Spell Check InfoPath Web Form in SharePoint. This time I will share how I managed to achieve Spell Checking in SharePoint 2010. This time round, we have changed our Online Forms strategy to use Custom lists instead of Form Libraries. I thought everything will be smooth sailing as we are using all OOTB features. So, we customised a Custom list form using InfoPath and added a few Rich Text Boxes (Spell Check is a requirement for this specific project). All is good in the InfoPath client including the Spell Checker so, happy days, I published straight away.Here comes the surprises now. I browsed to my Custom List and clicked Add New Item. This launched my Form in a modal dialog format. I went to my Rich Text Boxes to check the spell checker, and voila, it's disabled!I tried hacking the FormServer.aspx and the CustomSpellCheckEntirePage.js again but the new FormServer.aspx behaves differently than of MOSS 2007's. I searched for answers in many blogs to no avail. Often ending up being linked to my old blog post. I also tried placing the spell check javascript into a Content Editor Webpart of the Item's New Form and Edit form. It is launching the Spell Check dialog but it's not spellchecking the page correctly.At this point, I decided I needed to get my project across ASAP so enough with experimentations and logged a ticket with Microsoft Premier Support.On a call with the Support Engineer, I browsed through the Custom List and to the item to demonstrate my problem. Suddenly, the Spell Check tab in the toolbar is now Enabled! Surprised? Not much, it's Microsoft!Anyway, to cut my story short, here is a summary of my solution:Navigate to your Custom ListIn the Ribbon Toolbar, navigate to List > Customize List > Form Web Parts > Content Type Forms > (Item) New Form. This will display the newifs.aspx which is the page displayed when Add New Item is clicked. This page, just like any other SharePoint page, contains webparts. In this case, we have the InfoPath Form Web Part.Add a Content Editor Web Part (CEWP) on top of the InfoPath Form Web Part. (A blank CEWP would do for this example)Navigate to Page and click Stop EditingClick Add New Item again and navigate to a Rich Text box. Tadah! The Spell Check tab is now enabled!Do the same steps for the (Item) Edit Form to enable Spell Checks when editing an item.This "no code" solution discovered purely by accident!

  Read the article

• Android Touch Event Collision Detection

  - by chrissb

  I'm relatively new to both Java and Android, so hopefully the problem I'm having is stemming from something pretty minor that I've overlooked. I've got a (very early stage) game that I've started working on, for Android using Java. At this stage, when the user touches the screen, if they touched a point at which there is an enemy, the enemies health is decreased and they become immobile (for the current implementation at least). The issue that I'm having is that the touch detection doesn't always seem to work. I've got a testing sprite set up that goes to the eventX and eventY coordinates of the touch down event, and it always seems to collide with the enemy object. Yet, the enemy doesn't always register as being hit, and sometimes a hit is registered when the sprite indicates the touch coordinates were outside of the enemies bounding box. I realise that this probably doesn't mean much without any code, so here's what I've got so far. Be gentle, as this is literally my first attempt at something more than basic movement etc. First off, the MainGamePanel class registers the touch event, and informs the levelmanager class (which is what I set up to monitor/handle enemies) public boolean onTouchEvent(MotionEvent event) { if (event.getAction() == MotionEvent.ACTION_DOWN){ levelManager.handleActionDown((int)event.getX(), (int)event.getY()); targetX=event.getX(); targetY=event.getY(); } if (event.getAction() == MotionEvent.ACTION_MOVE) { //the gestures } if (event.getAction() == MotionEvent.ACTION_UP) { //touch was released } return true; } From there, in the levelmanager class the touch event is passed on to all of the enemies within a list array: public static void handleActionDown(int eventX,int eventY){ hit=false; for (enemy1 en : enemy1array){ en.handleActionDown(eventX, eventY); } } The rest of the collision code is handled within the enemies handleActionDown function: public void handleActionDown(int eventX, int eventY) { if(eventX>this.x-enemy1bitmap.getWidth() && eventX<this.x+enemy1bitmap.getWidth() && eventY>this.y-enemy1bitmap.getHeight() && eventY<this.x+enemy1bitmap.getHeight()){ takeDamage(1); levelmanager.setHit(); } } I should probably be using getWidth()/2 and getHeight()/2 for it to be more accurate, but I expanded the area to test this - although I've noticed no improvement. At this stage, the games detection over whether or not the enemy is hit is spotty at best. Generally it takes two or three attempts before a collision is successfully registered, even though the sprite that is being used for testing and set to the eventX and eventY coordinates always indicates that the collision should have worked. Hopefully someone can steer me in the right direction here, and if more information is needed, ask away! Cheers, -Chris

  Read the article

• Package dependency errors : libc

  - by piyush

  I was trying to install kde-full when the libc had some unmet dependencies error. When saying sudo apt-get install kde-full the terminal has this in the end libc6 : Depends: libc-bin (= 2.15-0ubuntu10) libc6:i386 : Depends: libc-bin:i386 (= 2.15-0ubuntu10) libc6-dev : Depends: libc6 (= 2.15-0ubuntu10.3) but 2.15-0ubuntu10 is to be installed libc6-i386 : Depends: libc6 (= 2.15-0ubuntu10.3) but 2.15-0ubuntu10 is to be installed When running sudo apt-get -f install, this shows up at the end De-configuring libc6:i386 ... A copy of the C library was found in an unexpected directory: '/lib/x86_64-linux-gnu/libc-2.15.so' It is not safe to upgrade the C library in this situation; please remove that copy of the C library or get it out of '/lib/x86_64-linux-gnu' and try again. dpkg: error processing /var/cache/apt/archives/libc6_2.15-0ubuntu10.3_amd64.deb (--unpack): subprocess new pre-installation script returned error exit status 1 Preparing to replace libc6:i386 2.15-0ubuntu10 (using .../libc6_2.15-0ubuntu10.3_i386.deb) ... De-configuring libc6 ... A copy of the C library was found in an unexpected directory: '/lib/i386-linux-gnu/ld-2.15.so' It is not safe to upgrade the C library in this situation; please remove that copy of the C library or get it out of '/lib/i386-linux-gnu' and try again. dpkg: error processing /var/cache/apt/archives/libc6_2.15-0ubuntu10.3_i386.deb (--unpack): subprocess new pre-installation script returned error exit status 1 Errors were encountered while processing: /var/cache/apt/archives/libc6_2.15-0ubuntu10.3_amd64.deb /var/cache/apt/archives/libc6_2.15-0ubuntu10.3_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) Any suggestions how to fix this. I don't desire to have kde-full anymore; only that other installations should work. I've done sudo apt-get update several times, so those suggestions can be kept away UPD : here is output of dpkg configure ~$ sudo dpkg --configure -a dpkg: dependency problems prevent configuration of libc6-dev: libc6-dev depends on libc6 (= 2.15-0ubuntu10.3); however: Version of libc6 on system is 2.15-0ubuntu10. dpkg: error processing libc6-dev (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libc6-i386: libc6-i386 depends on libc6 (= 2.15-0ubuntu10.3); however: Version of libc6 on system is 2.15-0ubuntu10. dpkg: error processing libc6-i386 (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: libc6-dev libc6-i386 ~$

  Read the article

• Exit Infragistics, Enter Telerik

  - by Anthony Trudeau

  Today I made the purchase of the Premium Collection of components from Telerik.  This follows an evaluation I’ve been doing to replace the Infragistics components we currently use for Windows Forms, ASP.NET MVC, and WPF. It was not a formal evaluation.  I had already decided to move the company away from Infragistics.  That decision was mostly born out of frustration with support over using the Infragistics components in my first production MVC application. One such issue was a simple scenario where you have a model that has a scalar property that can be one value out of a list.  The built-in combobox does this, but I was told by Infragistics support that they didn’t support it – and it took them several emails and days of waiting between responses to determine that.  I implemented this in Telerik in a minute not including the several minutes it took me to get a rudimentary understanding for the component and its API. Here’s the code using the built-in combobox:@Html.DropDownListFor(x => x.VendorId, new SelectList(ViewBag.Vendors, "VendorId", "VendorName", Model.VendorId), "Select Id") Here’s the code using the Telerik combobox:@(Html.Telerik().ComboBoxFor(model => model.VendorId) .AutoFill(true) .BindTo(new SelectList(ViewBag.Vendors, "VendorId", "VendorName", Model.VendorId)) )   I chose Telerik over other competitors based on the professional appearance of their website, and how easy it was to find information.  I’d like to say I had time to evaluate other Infragistics competitors.  Due to time constraints I had to make an initial decision based on superficial, but still important things. I picked Telerik with the plan to only look further at other companies if my evaluation didn’t meet my expectations.  Luckily they did, because I didn’t relish the thought of carving out more time to evaluate another set of components. Overall my experience with Telerik has been superior to Infragistics in every way.  The installation was easy using their control panel installer application.  Getting up to speed has been easy.  And the communication from Telerik has met my expectations.  And we’ll continue to be good as long as I don’t start getting email messages from a sales rep saying that they want to talk to me about training and consulting – I’m looking at you Infragistics.

  Read the article

• Oracle WebCenter: Composite Applications & Mash-Ups

  - by kellsey.ruppel(at)oracle.com

  We’ve talked in previous weeks about the key goals of the new release of WebCenter are providing a Modern User Experience, unparalleled Application Integration, converging all the best of the existing portal platforms into WebCenter and delivering a Common User Experience Architecture.  We’ve provided an overview of Oracle WebCenter and discussed some of the other key goals in previous weeks, and this week, we’ll focus on how with the new release of Oracle WebCenter you can create composite applications and mashups.We recently talked with Sachin Agarwal, Director of Product Management of Enterprise 2.0 at Oracle around the topic of Composite Applications and Mashups. Oracle WebCenter provides a rich set of tools and capabilities for pulling in content, applications and collaboration functionality from various different sources and weaving them together into what we call Mashups. Mashups that also consists of transactional applications from multiple sources are specifically called Composite Applications. With the latest release of Oracle WebCenter one can develop highly productive tasked based interfaces that aggregate a related set of applications that are part of a business process and provide in context collaboration tools so that users don’t have to navigate away to different tabs to achieve these tasks. For instance, a call center representative (CSR), not only needs to be able to pull customer information from a CRM application like Siebel, but also related information from Oracle E-Business Suite about whether a specific order has shipped. The CSR will be far more efficient if he or she does not have to open different tabs to login into multiple applications while the customer is waiting, but can access all this information in one mashup.Oracle WebCenter Suite provides a comprehensive set of tooling that enables a business user to quickly aggregate together a mashup and wire-in different backend applications to create a custom dashboard. Not only does Oracle WebCenter supports a wide set of standards (WSRP 1.0, 2.0, JSR 168, JSR 286) that allow portlets  from other applications to be surfaced within WebCenter, but it also provides tools to bring in other web applications such as .Net Applications  as well as SharePoint webparts. The new Business Mash-up editor allows business users to take any Oracle Application or 3rd party application and wire the backend data sources or APIs to a rich set of visualizations and reuse them in mashups.  Moreover, Business users can customize or personalize any page using Oracle WebCenter Composer’s on-the-fly visual page editing features. Users access and select different resource components available in Oracle WebCenter’s Business Dictionary in order to add new content to the page. The Business Dictionary provides a role-based view of available components or resources, and these components can include information from a variety of enterprise resources such as enterprise applications, managed content, rich media, business processes, or business intelligence systems. Together, Oracle WebCenter’s Composer and Business Dictionary give users access to a powerful, yet easy to use, set of tools to personalize and extend their Oracle WebCenter portals and applications without involving IT.Keep checking back this week as we share more information on how you can easily create Commposite Applications and Mashups with Oracle WebCenter .Technorati Tags: UXP, collaboration, enterprise 2.0, modern user experience, oracle, portals, webcenter, applications, mashups, composite applications

  Read the article

• Oracle WebCenter: Composite Applications & Mash-Ups

  - by kellsey.ruppel(at)oracle.com

  We’ve talked in previous weeks about the key goals of the new release of WebCenter are providing a Modern User Experience, unparalleled Application Integration, converging all the best of the existing portal platforms into WebCenter and delivering a Common User Experience Architecture.  We’ve provided an overview of Oracle WebCenter and discussed some of the other key goals in previous weeks, and this week, we’ll focus on how with the new release of Oracle WebCenter you can create composite applications and mashups.We recently talked with Sachin Agarwal, Director of Product Management of Enterprise 2.0 at Oracle around the topic of Composite Applications and Mashups. Oracle WebCenter provides a rich set of tools and capabilities for pulling in content, applications and collaboration functionality from various different sources and weaving them together into what we call Mashups. Mashups that also consists of transactional applications from multiple sources are specifically called Composite Applications. With the latest release of Oracle WebCenter one can develop highly productive tasked based interfaces that aggregate a related set of applications that are part of a business process and provide in context collaboration tools so that users don’t have to navigate away to different tabs to achieve these tasks. For instance, a call center representative (CSR), not only needs to be able to pull customer information from a CRM application like Siebel, but also related information from Oracle E-Business Suite about whether a specific order has shipped. The CSR will be far more efficient if he or she does not have to open different tabs to login into multiple applications while the customer is waiting, but can access all this information in one mashup.Oracle WebCenter Suite provides a comprehensive set of tooling that enables a business user to quickly aggregate together a mashup and wire-in different backend applications to create a custom dashboard. Not only does Oracle WebCenter supports a wide set of standards (WSRP 1.0, 2.0, JSR 168, JSR 286) that allow portlets  from other applications to be surfaced within WebCenter, but it also provides tools to bring in other web applications such as .Net Applications  as well as SharePoint webparts. The new Business Mash-up editor allows business users to take any Oracle Application or 3rd party application and wire the backend data sources or APIs to a rich set of visualizations and reuse them in mashups.  Moreover, Business users can customize or personalize any page using Oracle WebCenter Composer’s on-the-fly visual page editing features. Users access and select different resource components available in Oracle WebCenter’s Business Dictionary in order to add new content to the page. The Business Dictionary provides a role-based view of available components or resources, and these components can include information from a variety of enterprise resources such as enterprise applications, managed content, rich media, business processes, or business intelligence systems. Together, Oracle WebCenter’s Composer and Business Dictionary give users access to a powerful, yet easy to use, set of tools to personalize and extend their Oracle WebCenter portals and applications without involving IT.Keep checking back this week as we share more information on how you can easily create Commposite Applications and Mashups with Oracle WebCenter .Technorati Tags: UXP, collaboration, enterprise 2.0, modern user experience, oracle, portals, webcenter, applications, mashups, composite applications

  Read the article

• Oracle WebCenter: Composite Applications & Mash-Ups

  - by kellsey.ruppel(at)oracle.com

  We’ve talked in previous weeks about the key goals of the new release of WebCenter are providing a Modern User Experience, unparalleled Application Integration, converging all the best of the existing portal platforms into WebCenter and delivering a Common User Experience Architecture.  We’ve provided an overview of Oracle WebCenter and discussed some of the other key goals in previous weeks, and this week, we’ll focus on how with the new release of Oracle WebCenter you can create composite applications and mashups.We recently talked with Sachin Agarwal, Director of Product Management of Enterprise 2.0 at Oracle around the topic of Composite Applications and Mashups. Oracle WebCenter provides a rich set of tools and capabilities for pulling in content, applications and collaboration functionality from various different sources and weaving them together into what we call Mashups. Mashups that also consists of transactional applications from multiple sources are specifically called Composite Applications. With the latest release of Oracle WebCenter one can develop highly productive tasked based interfaces that aggregate a related set of applications that are part of a business process and provide in context collaboration tools so that users don’t have to navigate away to different tabs to achieve these tasks. For instance, a call center representative (CSR), not only needs to be able to pull customer information from a CRM application like Siebel, but also related information from Oracle E-Business Suite about whether a specific order has shipped. The CSR will be far more efficient if he or she does not have to open different tabs to login into multiple applications while the customer is waiting, but can access all this information in one mashup.Oracle WebCenter Suite provides a comprehensive set of tooling that enables a business user to quickly aggregate together a mashup and wire-in different backend applications to create a custom dashboard. Not only does Oracle WebCenter supports a wide set of standards (WSRP 1.0, 2.0, JSR 168, JSR 286) that allow portlets  from other applications to be surfaced within WebCenter, but it also provides tools to bring in other web applications such as .Net Applications  as well as SharePoint webparts. The new Business Mash-up editor allows business users to take any Oracle Application or 3rd party application and wire the backend data sources or APIs to a rich set of visualizations and reuse them in mashups.  Moreover, Business users can customize or personalize any page using Oracle WebCenter Composer’s on-the-fly visual page editing features. Users access and select different resource components available in Oracle WebCenter’s Business Dictionary in order to add new content to the page. The Business Dictionary provides a role-based view of available components or resources, and these components can include information from a variety of enterprise resources such as enterprise applications, managed content, rich media, business processes, or business intelligence systems. Together, Oracle WebCenter’s Composer and Business Dictionary give users access to a powerful, yet easy to use, set of tools to personalize and extend their Oracle WebCenter portals and applications without involving IT.Keep checking back this week as we share more information on how you can easily create Commposite Applications and Mashups with Oracle WebCenter .Technorati Tags: UXP, collaboration, enterprise 2.0, modern user experience, oracle, portals, webcenter, applications, mashups, composite applications

  Read the article

• x axis detection issues platformer starter kit

  - by dbomb101

  I've come across a problem with the collision detection code in the platformer starter kit for xna.It will send up the impassible flag on the x axis despite being nowhere near a wall in either direction on the x axis, could someone could tell me why this happens ? Here is the collision method. /// <summary> /// Detects and resolves all collisions between the player and his neighboring /// tiles. When a collision is detected, the player is pushed away along one /// axis to prevent overlapping. There is some special logic for the Y axis to /// handle platforms which behave differently depending on direction of movement. /// </summary> private void HandleCollisions() { // Get the player's bounding rectangle and find neighboring tiles. Rectangle bounds = BoundingRectangle; int leftTile = (int)Math.Floor((float)bounds.Left / Tile.Width); int rightTile = (int)Math.Ceiling(((float)bounds.Right / Tile.Width)) - 1; int topTile = (int)Math.Floor((float)bounds.Top / Tile.Height); int bottomTile = (int)Math.Ceiling(((float)bounds.Bottom / Tile.Height)) - 1; // Reset flag to search for ground collision. isOnGround = false; // For each potentially colliding tile, for (int y = topTile; y <= bottomTile; ++y) { for (int x = leftTile; x <= rightTile; ++x) { // If this tile is collidable, TileCollision collision = Level.GetCollision(x, y); if (collision != TileCollision.Passable) { // Determine collision depth (with direction) and magnitude. Rectangle tileBounds = Level.GetBounds(x, y); Vector2 depth = RectangleExtensions.GetIntersectionDepth(bounds, tileBounds); if (depth != Vector2.Zero) { float absDepthX = Math.Abs(depth.X); float absDepthY = Math.Abs(depth.Y); // Resolve the collision along the shallow axis. if (absDepthY < absDepthX || collision == TileCollision.Platform) { // If we crossed the top of a tile, we are on the ground. if (previousBottom <= tileBounds.Top) isOnGround = true; // Ignore platforms, unless we are on the ground. if (collision == TileCollision.Impassable || IsOnGround) { // Resolve the collision along the Y axis. Position = new Vector2(Position.X, Position.Y + depth.Y); // Perform further collisions with the new bounds. bounds = BoundingRectangle; } } //This is the section which deals with collision on the x-axis else if (collision == TileCollision.Impassable) // Ignore platforms. { // Resolve the collision along the X axis. Position = new Vector2(Position.X + depth.X, Position.Y); // Perform further collisions with the new bounds. bounds = BoundingRectangle; } } } } } // Save the new bounds bottom. previousBottom = bounds.Bottom; }

  Read the article

• Getting WLAN on my Laptop to work (Medion MD98300)

  - by Anand Böhmer

  Dear Ubuntu Community, I am having difficulties to get the WLAN Adapter on my Medion 98300 Laptop to work. The WLAN Card seems to be connected through an internal USB Interface and the Card itself had shown up as a wirelles Network while installing Ubuntu. I have tried a few things earlier, but none of my google reasearches have brought me to a working solution... I am quite new to the Linux System and only knoew a couple of terminal commands so far, so I probably have missed out on a few possible solutions. Maybe you can help me? Thank you very much in advance! A fre minimal technical Details: AMD Turion 64 X2 Dual-Core Mobile Technolgie TL-50 NVIDIA GeForce Go 6150 SanDisk 64GB SSD 2GB RAM DDR2 667 nForce Chipset (I forgt the Version, but deductable from the GPU I guess) WiFi: ZyDAS ZD1211B 802.11g Thank's a lot again! :) UPDATE: I tried around myself a little and found a guide on the Linux Mint forums that helped! I already had tried to install the linux backport modules etc. What I finally did was update the linux firmware and run the following command: echo "options acer_wmi wirelles=1" sudo tee /etc/modprobe.d/acer_wmi.conf and rebooted now I found and could connect to networks, but unfortunately I found, that the link quality was very bad, around 40 to 50. Eventhough my Router is running at high power and is only 6 Meters away! I then switched a few channels, but that did not improve much. Before, under Windows, I had a very good link quality and had the entire 16mbit/s internet connection at disposal, now I can only get about 3-5Mbit/s. better then nothing, but still pretty bad! The "TX power" is fixed on 20dBm and iwconfig says, that the "Power Management" is off... Maybe the power of the module is set too low?... UPDATE2: I figured that 20dBm is a normal power output. I even tried to change the power using iwconfig wlan0 txpower INTEGERHERE but, obviously my "Card" does not support more then 20. More would probably be illegal as well, so I won't even use more then 20. I guess that I will have to figure out a way, or maybe just switch cards. Are the Mailboard-USB-Connectors on a laptop of the same property as the standard external ones? If so, I could simply solder a micro Wirelless N Adapter onto the board :)

  Read the article

• Determining cause of random latency and loading issues

  - by Sherwin Flight

  I'm not sure exactly what details to post in regards to my issue, because I'm not sure what is relevant. Prior to the end of September my websites all loaded quickly, in almost all cases. Loading time wasn't usually more than a few seconds. However, since the end of September I noticed a big increase in page loading times. In some cases pages were taking 30 seconds or more to load. I do have a remote monitoring service monitoring some of the sites as well, and the image below shows the response times over the past month. The response times shown at the beginning of this graph were what the usual response times were prior to this issue occurring. You can see that there has been a significant increase in response times from the beginning to the end of this graph. The thing is, the problem is not happening 100% of the time. If I click through the site, or even just keep refreshing the page, about 25% of the time the pages load quickly, the remaining 75% of the time they load slowly. Sometimes the pages take so long to load that they time out, and don't load at all. I have contacted my hosting provider, and they said things at their end was fine. I don't believe the problem is my home internet provider, because all other websites load without a problem. The server is located in Texas, USA. This also raises another interesting point. My remote monitor checks my site from two locations, California, USA, and London, England. As you can see in the chart below the response time is actually shorter when checked from London, which doesn't seem to make sense, since the server is physically closer to the California monitoring location. I would have expected the London monitoring location to have higher response times since they are physically farther away. I should also point out that in some traceroute test I've done it seem like the first connection to the server seems to take the longest, then after that the rest of the page loads quickly. Below is a little chart showing the times for the first connection to the server. So, what could be causing this problem, and what steps can I take to resolve it or at least narrow down the problem? Sending the request to the server was very quick, and receiving the reply back seems pretty quick, but the WAIT time is really long. So it connects, sends the request, but then waits close to 30 seconds before it starts receiving data back. I am also aware that there are things I can do to speed up page loading times, like reducing the number of CSS and JS files used on a page, compressing images, etc. This is not really what the source of the problem is though, because nothing has really changed on the site since before the problem started, and other sites on the same server are loading slowly as well.

  Read the article

• How to generate xorg.conf? (X -configure segfaults)

  - by Nicolas Raoul

  My video card is working fine, I have no screen problem. I am trying to generate an xorg.conf so I did: [ Logout ] sudo service gdm stop [ Move away xorg.conf.back and xorg.conf.fglrx-0 that were in /etc/X11 ] sudo dpkg-reconfigure xserver-xorg sudo X -configure But this last command segfaults: X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-27-server i686 Ubuntu Current Operating System: Linux nico 2.6.32-25-generic #44-Ubuntu SMP Fri Sep 17 20:26:08 UTC 2010 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-25-generic root=UUID=7447ab16-3406-442d-81e5-bb6a2d795205 ro quiet splash Build Date: 21 July 2010 12:47:34PM xorg-server 2:1.7.6-2ubuntu7.3 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 15 16:06:11 2010 List of video drivers: i740 ark geode siliconmotion mach64 s3 r128 apm intel neomagic vesa trident chips s3virge fglrx sis savage rendition i128 tseng ztv mga openchrome radeon ati nv v4l vmware cirrus tdfx nouveau sisusb voodoo fbdev (EE) Can't load FireGL DRM library (libfglrxdrm.so). Backtrace: 0: X (xorg_backtrace+0x3b) [0x80e938b] 1: X (0x8048000+0x61c8d) [0x80a9c8d] 2: (vdso) (__kernel_rt_sigreturn+0x0) [0x34d410] 3: X (xf86CallDriverProbe+0x182) [0x80b82d2] 4: X (DoConfigure+0x1c8) [0x816b898] 5: X (InitOutput+0x1da) [0x80b98aa] 6: X (0x8048000+0x1ebbb) [0x8066bbb] 7: /lib/tls/i686/cmov/libc.so.6 (__libc_start_main+0xe6) [0x467bd6] 8: X (0x8048000+0x1e961) [0x8066961] Segmentation fault at address (nil) Caught signal 11 (Segmentation fault). Server aborting Please consult the The X.Org Foundation support at http://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. ddxSigGiveUp: Closing log Note the line Can't load FireGL DRM library (libfglrxdrm.so) Note: I do have file /usr/lib/fglrx/xorg/modules/linux/libfglrxdrm.so It is strange that it segfaults whereas I can use Gnome with no problem but well... Might be related: I tried to install the driver from ATI's website recently, and from then glxgears crashes at start. How can I generate xorg.conf in those conditions? It might or might not involve solving the segfault problem.

  Read the article

• Diving into Scala with Cay Horstmann

  - by Janice J. Heiss

  A new interview with Java Champion Cay Horstmann, now up on otn/java, titled  "Diving into Scala: A Conversation with Java Champion Cay Horstmann," explores Horstmann's ideas about Scala as reflected in his much lauded new book,  Scala for the Impatient.  None other than Martin Odersky, the inventor of Scala, called it "a joy to read" and the "best introduction to Scala". Odersky was so enthused by the book that he asked Horstmann if the first section could be made available as a free download on the Typesafe Website, something Horstmann graciously assented to. Horstmann acknowledges that some aspects of Scala are very complex, but he encourages developers to simply stay away from those parts of the language. He points to several ways Java developers can benefit from Scala: "For example," he says, " you can write classes with less boilerplate, file and XML handling is more concise, and you can replace tedious loops over collections with more elegant constructs. Typically, programmers at this level report that they write about half the number of lines of code in Scala that they would in Java, and that's nothing to sneeze at. Another entry point can be if you want to use a Scala-based framework such as Akka or Play; you can use these with Java, but the Scala API is more enjoyable. " Horstmann observes that developers can do fine with Scala without grasping the theory behind it. He argues that most of us learn best through examples and not through trying to comprehend abstract theories. He also believes that Scala is the most attractive choice for developers who want to move beyond Java and C++.  When asked about other choices, he comments: "Clojure is pretty nice, but I found its Lisp syntax a bit off-putting, and it seems very focused on software transactional memory, which isn't all that useful to me. And it's not statically typed. I wanted to like Groovy, but it really bothers me that the semantics seems under-defined and in flux. And it's not statically typed. Yes, there is Groovy++, but that's in even sketchier shape. There are a couple of contenders such as Kotlin and Ceylon, but so far they aren't real. So, if you want to do work with a statically typed language on the JVM that exists today, Scala is simply the pragmatic choice. It's a good thing that it's such a nice choice." Learn more about Scala by going to the interview here.

  Read the article

• How to get tens of millions of pages indexed by Google bot?

  - by Chris Adragna

  We are currently developing a site that currently has 8 million unique pages that will grow to about 20 million right away, and eventually to about 50 million or more. Before you criticize... Yes, it provides unique, useful content. We continually process raw data from public records and by doing some data scrubbing, entity rollups, and relationship mapping, we've been able to generate quality content, developing a site that's quite useful and also unique, in part due to the breadth of the data. It's PR is 0 (new domain, no links), and we're getting spidered at a rate of about 500 pages per day, putting us at about 30,000 pages indexed thus far. At this rate, it would take over 400 years to index all of our data. I have two questions: Is the rate of the indexing directly correlated to PR, and by that I mean is it correlated enough that by purchasing an old domain with good PR will get us to a workable indexing rate (in the neighborhood of 100,000 pages per day). Are there any SEO consultants who specialize in aiding the indexing process itself. We're otherwise doing very well with SEO, on-page especially, besides, the competition for our "long-tail" keyword phrases is pretty low, so our success hinges mostly on the number of pages indexed. Our main competitor has achieved approx 20MM pages indexed in just over one year's time, along with an Alexa 2000-ish ranking. Noteworthy qualities we have in place: page download speed is pretty good (250-500 ms) no errors (no 404 or 500 errors when getting spidered) we use Google webmaster tools and login daily friendly URLs in place I'm afraid to submit sitemaps. Some SEO community postings suggest a new site with millions of pages and no PR is suspicious. There is a Google video of Matt Cutts speaking of a staged on-boarding of large sites, too, in order to avoid increased scrutiny (at approx 2:30 in the video). Clickable site links deliver all pages, no more than four pages deep and typically no more than 250(-ish) internal links on a page. Anchor text for internal links is logical and adds relevance hierarchically to the data on the detail pages. We had previously set the crawl rate to the highest on webmaster tools (only about a page every two seconds, max). I recently turned it back to "let Google decide" which is what is advised.

  Read the article

• RPi and Java Embedded GPIO: Sensor Connections for Java Enabled Interface

  - by hinkmond

  Now we're ready to connect the hardware needed to make a static electricity sensor for the Raspberry Pi and use Java code to access it through a GPIO port. First, very carefully bend the NTE312 (or MPF-102) transistor "gate" pin (see the diagram on the back of the package or refer to the pin diagram on the Web). You can see it in the inset photo on the bottom left corner. I bent the leftmost pin of the NTE312 transistor as I held the flat part toward me. That is going to be your antenna. So, connect one of the jumper wires to the bent pin. I used the dark green jumper wire (looks almost black; coiled at the bottom) in the photo. Then push the other 2 pins of the transistor into your breadboard. Connect one of the pins to Pin # 1 (3.3V) on the GPIO header of your RPi. See the diagram if you need to glance back at it. In the photo, that's the orange jumper wire. And connect the final unconnected transistor pin to Pin # 22 (GPIO25) on the RPi header. That's the blue jumper wire in my photo. For reference, connect the LED anode (long pin on a common anode LED/short pin on a common cathode LED, check your LED pin diagram) to the same breadboard hole that is connecting to Pin # 22 (same row of holes where the blue wire is connected), and connect the other pin of the LED to GROUND (row of holes that connect to the black wire in the photo). Test by blowing up a balloon, rubbing it on your hair (or your co-worker's hair, if you are hair-challenged) to statically charge it, and bringing it near your antenna (green wire in the photo). The LED should light up when it's near and go off when you pull it away. If you need more static charge, find a co-worker with really long hair, or rub the balloon on a piece of silk (which is just as good but not as fun). Next blog post is where we do some Java coding to access this sensor on your RPi. Finally, back to software! Ha! Hinkmond

  Read the article

< Previous Page | 141 142 143 144 145 146 147 148 149 150 151 152  | Next Page >