Search Results

Search found 4028 results on 162 pages for 'mysqld safe'.

Page 145/162 | < Previous Page | 141 142 143 144 145 146 147 148 149 150 151 152  | Next Page >

• Lenovo Ideapad Y480 can't reinstall windows?

  - by elegantonyx

  Alright, so here's the deal... For a while, I wanted to mess with Linux. I don't know why, but I wanted to. So, what I did was use WUBI and install Ubuntu. Because of some unknown reason (Intel Rapid Start? Half the drivers being on a Lenovo-installed SSD [separate from the main hard drive]?) it wouldn't dual boot. So, I decided to use Linux Mint instead, and install it in a partition. Since Windows 7 Home Premium won't make partitions any more if you have a certain number already, I just shrank my system drive and left empty space for the installer to claim. When I installed Mint, it worked, but left my Windows 7 installation unable to boot and eventually it corrupted. I tried to use a system repair disc I burned earlier but it didn't find the Windows installation, so I assume the partition corrupted. I used this link:http://www.pcworld.com/article/248995/how_to_install_windows_7_without_the_disc.html to try and reinstall Windows. What happened was that originally it said that the partition I was trying to reinstall from had been locked down by the OEM (Lenovo). So, I went into GParted, wiped EVERYTHING, and selected 'Construct new Boot record' or whatever that function is, and now the error is: "Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information." Does anyone know how to see the log files? Can anyone help? This system is a month old but the warranty only covers hardware failures, and I would need to pay around USD$60 for them to fix it. Please help. Any ideas? this is my main machine... Extra information: I have at my disposal: System Repair Disc (Burned myself) Windows 7 Home Premium 64 bit SP1 installation disk (burned from the pcworld links) Gparted Live CD Linux Mint 13 live cd A system backup (from the morning before this catastrophe) made using the Windows Backup and Restore. I put it on an external drive...that should be safe for now.

  Read the article

• WSS and CAG , _layout pages break

  - by Mike

  Alright, I've searched everywhere and I cannot find the answer, due to the rarity of our setup. WSS 3.0/IIS 6.0/WinServer 2003 We have a sharepoint site that is in good shape, almost. Its TCP and SSL port are uncommon and need to be rerouted to work properly. This is where the Citrix Access Gateway (CAG) comes in play. It will redirect any request from URL (something.something.com) to the correct SSL port on the correct server. My AAM is configured to Default something.something.com and nothing else, since the CAG will provide the port. We use FBA, and require SSL. This works perfectly for everything that is safe or that is anything that an end user can see, but if I try to add a webpart, it errors out. Whereas if I add it internally, or bypass the CAG the webpart adds fine. The same goes for most of the _layouts pages, like _layouts/new.aspx. If I add a Link List/Doc library on the something.something.com, it errors out (Page cannot be displayed) and the page won't display, but if I try it with an internal address it will work fine. I found that if I am trying to add something or doing anything administrative, the site will navigate to the pages that I need to go to fine, but when i actually ADD something the URL will change from something.something.com to something.something.com:SSLport, thus erroring out the site. The URL with the SSL port shows on the Site URL when navigating to Site Settings. However, if I bypass the CAG, using the internal address the _layouts page works like a charm and i can add anything. All the CAG does is reroute a DNS request to the provided server and port. I've tried reextending the application, no luck same thing. I've tried changing the AAM to hide the port and the CAG rejects it. I've tried to recreate a new webapp/site collection with the same rules on the CAG, same thing occurs. Correct me if I'm wrong, and please provide me with some feedback and answers. Any suggestions would be very appreciated. Is it the CAG or the Alternate Access Mappings (AAM)?

  Read the article

• Changing User/Group to allow PHP to chmod/rename and move_upload_file()

  - by moe

  Hi There, It seems like I cannot do anything with my PHP script on my VPS. It returns 'Permission denied' when I try to upload something to a directory. Yes, I have changed the permission to 777, and it works, but I do not like the insecurity When running the command: ps axu|grep apache|grep -v grep It returns nobody 7689 0.1 3.8 50604 20036 ? S 21:38 0:00 /usr/local/apache/bin/httpd -k start -DSSL root 13600 0.0 3.8 50304 20348 ? Ss Jun06 0:46 /usr/local/apache/bin/httpd -k start -DSSL nobody 15733 0.1 3.8 50700 20156 ? S 21:39 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 15818 0.1 3.8 51492 20180 ? S 21:39 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 23843 0.1 3.7 51336 19592 ? S 21:40 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 30335 0.0 3.5 50436 18496 ? S 21:41 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 30406 0.0 3.5 50444 18544 ? S 21:41 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 30407 0.0 3.5 50556 18696 ? S 21:41 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 30472 0.0 3.6 50828 19348 ? S 21:41 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 30474 0.0 3.5 50668 18868 ? S 21:41 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 30476 0.0 3.6 50532 19064 ? S 21:41 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 30501 0.0 3.8 50556 20080 ? S 21:36 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 32341 0.0 3.5 50444 18492 ? S 21:41 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 32370 0.0 3.5 50444 18476 ? S 21:42 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 32414 0.1 3.7 51336 19524 ? S 21:42 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 32416 0.1 3.5 50668 18816 ? S 21:42 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 32457 0.1 3.6 50828 19320 ? S 21:42 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 32458 0.1 3.6 50772 19276 ? S 21:42 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 32459 0.0 3.5 50444 18504 ? S 21:42 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 32460 0.2 3.6 50828 19320 ? S 21:42 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 32463 0.0 3.5 50444 18472 ? S 21:42 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 32466 0.0 3.4 50436 17960 ? S 21:42 0:00 /usr/local/apache/bin/httpd -k start -DSSL The owner of the directory is 'user [505]' and the group is 'user[508]' (as seen in WinSCP) What can I do to change the Apache Handler to the right owner and group to allow my PHP scripts to work? P.S My PHP is not set to safe mode, and the open_basedir is set to no value

  Read the article

• Need Windows XP VGA driver for i3 Haswell

  - by AFH

  Background: I have recently upgraded my hardware because the previous Pentium system started failing to the point that it would not run long enough to boot. It was obviously a hardware fault, but I had no way of knowing whether it was in the motherboard, CPU or memory. Not all the components were now available, so I decided to replace all three. In order to get some benefit from the expenditure, I though I would put in faster components, and for future-proofing went for recently released ones: MSI Z87-G41-PCMate and Intel i3-4130 with 4400 HD graphics. The system performs excellently with Ubuntu 13.10, so I know there are no hardware problems, but I need to continue running XP because it runs several thousand pounds (UK) worth of software, which meets my needs more than adequately: in some cases there is no longer support for later Windows releases, and in most others an expensive and to me unnecessary upgrade is required. Problem: The motherboard specifications claim Windows XP support for the live driver update utility, which misled me into believing that XP drivers were available. Not true: Intel have apparently refused to provide XP drivers for Haswell chips. The update program runs on XP, but finds no suitable Intel drivers. The system is more or less running on the default fail-safe VGA driver, but DirectX will not load, which stops a number of my applications from running. I have been trawling the internet for a month now, but I have not found a graphics driver which will load successfully: all show "This device cannot start. (code 10)". I don't need HDMI support: my monitor is 1280x1024 and connected through the VGA port, so all I need is a driver which will handle this resolution well enough to support DirectX. Has anyone found a driver which will do this? Please don't reply with information found from internet searches, unless you have actually solved this problem: be assured that I have been all round the houses looking at solutions which others have reported as working, but none of them does for me. Incidentally, I did find an Intel HD sound driver which XP accepts (winxp_145111.exe from Intel), though without connecting to an HDMI port on a TV or sound system I have no idea if it works in practice. However, the graphics section of the same driver fails, like all the others I've tried.

  Read the article

• prevent filesystem from entering read-only mode

  - by user788171

  I have found that my server's filesystem is continuously entering read-only mode. There have been some issues with the raid1 array, but I have removed the bad disk from the array. However, it is still physically plugged into the system because I haven't had a chance to go over to the datacentre, I suspect udev and the system kernel is still picking up the bad disk and throwing errors. In /var/log/messages, there are errors like this: Mar 2 06:53:14 nocloud kernel: ata1: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0xe frozen Mar 2 06:53:14 nocloud kernel: ata1: irq_stat 0x00400040, connection status changed Mar 2 06:53:14 nocloud kernel: ata1: SError: { PHYRdyChg DevExch } Mar 2 06:53:14 nocloud kernel: ata1: hard resetting link Mar 2 06:53:20 nocloud kernel: ata1: link is slow to respond, please be patient (ready=0) Mar 2 06:53:21 nocloud kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 2 06:53:21 nocloud kernel: ata1.00: configured for UDMA/133 Mar 2 06:53:21 nocloud kernel: ata1: EH complete This happens fairly randomly throughout the day until eventually the filesystem becomes read-only. When this happens, my system becomes non-operational which kind of defeats the purpose of having a raid1. Note, ata1 is the bad disk (I think ata1 corresponds to /dev/sda because they are both first in line). Under mdadm, /dev/sda1,2 is no longer being used, but I can't prevent the system kernel from continuing to query that disk when I am no longer using it and throwing these errors. Is there a way to prevent my filesystem from automatically going into read-only mode? Furthermore, is it safe to do so? Thanks in advance. EDIT: Additional information: output from cat /proc/mdstat md1 : active raid1 sdb2[1] 976554876 blocks super 1.1 [2/1] [_U] bitmap: 5/8 pages [20KB], 65536KB chunk md0 : active raid1 sdb1[1] 204788 blocks super 1.0 [2/1] [_U] Output from mount: /dev/mapper/VolGroup-LogVol00 on / type ext4 (rw,noatime) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) tmpfs on /dev/shm type tmpfs (rw,rootcontext="system_u:object_r:tmpfs_t:s0") /dev/md0 on /boot type ext4 (rw) none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw) EDIT2: pvdisplay output: --- Physical volume --- PV Name /dev/md1 VG Name VolGroup PV Size 931.32 GiB / not usable 2.87 MiB Allocatable yes (but full) PE Size 16.00 MiB Total PE 59604 Free PE 0 Allocated PE 59604

  Read the article

• Installing Phusion Passenger 4.0.20 on Ubuntu 13.10

  - by tempestfire2002

  So I'm trying to install Passenger on the newest version of KUbuntu (13.10). I installed Apache2 using the apache2-mpm-worker package using the Muon Package Manager. And these are the commands I ran. rvmsudo gem install passenger rvmsudo passenger-install-apache2-module But I keep getting the following errors: [Fri Oct 18 15:52:13.227790 2013] [core:warn] [pid 13095] AH00111: Config variable ${APACHE_LOCK_DIR} is not defined [Fri Oct 18 15:52:13.227933 2013] [core:warn] [pid 13095] AH00111: Config variable ${APACHE_PID_FILE} is not defined [Fri Oct 18 15:52:13.227969 2013] [core:warn] [pid 13095] AH00111: Config variable ${APACHE_RUN_USER} is not defined [Fri Oct 18 15:52:13.227991 2013] [core:warn] [pid 13095] AH00111: Config variable ${APACHE_RUN_GROUP} is not defined [Fri Oct 18 15:52:13.228026 2013] [core:warn] [pid 13095] AH00111: Config variable ${APACHE_LOG_DIR} is not defined [Fri Oct 18 15:52:13.231737 2013] [core:warn] [pid 13095:tid 3074562624] AH00111: Config variable ${APACHE_RUN_DIR} is not defined [Fri Oct 18 15:52:13.232760 2013] [core:warn] [pid 13095:tid 3074562624] AH00111: Config variable ${APACHE_LOG_DIR} is not defined [Fri Oct 18 15:52:13.233043 2013] [core:warn] [pid 13095:tid 3074562624] AH00111: Config variable ${APACHE_LOG_DIR} is not defined [Fri Oct 18 15:52:13.233078 2013] [core:warn] [pid 13095:tid 3074562624] AH00111: Config variable ${APACHE_LOG_DIR} is not defined AH00526: Syntax error on line 74 of /etc/apache2/apache2.conf: Invalid Mutex directory in argument file:${APACHE_LOCK_DIR} -------------------------------------------- WARNING: Apache doesn't seem to be compiled with the 'prefork', 'worker' or 'event' MPM Phusion Passenger has only been tested on Apache with the 'prefork', the 'worker' and the 'event' MPM. Your Apache installation is compiled with the '' MPM. We recommend you to abort this installer and to recompile Apache with either the 'prefork', the 'worker' or the 'event' MPM. Press Ctrl-C to abort this installer (recommended). Press Enter if you want to continue with installation anyway. The result of my running apache2ctl -V is: Server version: Apache/2.4.6 (Ubuntu) Server built: Aug 9 2013 14:31:04 Server's Module Magic Number: 20120211:23 Server loaded: APR 1.4.8, APR-UTIL 1.5.2 Compiled using: APR 1.4.8, APR-UTIL 1.5.2 Architecture: 32-bit Server MPM: worker threaded: yes (fixed thread count) forked: yes (variable process count) Server compiled with.... -D APR_HAS_SENDFILE -D APR_HAS_MMAP -D APR_HAVE_IPV6 (IPv4-mapped addresses enabled) -D APR_USE_SYSVSEM_SERIALIZE -D APR_USE_PTHREAD_SERIALIZE -D SINGLE_LISTEN_UNSERIALIZED_ACCEPT -D APR_HAS_OTHER_CHILD -D AP_HAVE_RELIABLE_PIPED_LOGS -D DYNAMIC_MODULE_LIMIT=256 -D HTTPD_ROOT="/etc/apache2" -D SUEXEC_BIN="/usr/lib/apache2/suexec" -D DEFAULT_PIDLOG="/var/run/apache2.pid" -D DEFAULT_SCOREBOARD="logs/apache_runtime_status" -D DEFAULT_ERRORLOG="logs/error_log" -D AP_TYPES_CONFIG_FILE="mime.types" -D SERVER_CONFIG_FILE="apache2.conf" As can be seen, the server is compiled with the worker MPM, so why is passenger complaining? And how do I solve the above errors (warnings, really, but to be safe, I'd like to not have any warnings)? Thanks.

  Read the article

• Small Business Server services will not start, and remote desktop and UAC are broken

  - by Stephen Jennings

  Yesterday I began setting up a server with Windows Small Business Server 2008. All I am configuring it for right now is to be a domain controller and Exchange server. I completed the initial setup of SBS then started looking through different connection options (allowing VPN versus using a TS Gateway). After I rebooted one time, I started having three not-obviously-related issues: First, I could no longer remote desktop into the computer. I ran TCPView and saw that it was no longer listening on port 3389. I checked everything in Terminal Service Configuration but everything shows the computer ought to be allowing connections. Also, when I tried to use anything that required user account control elevation, the UAC dialog never popped up and the program that was waiting just froze. If I try to run "regedit" from the Run box, for example, it never appears. When I run in safe mode which does not run with UAC, I was able to access everything. I didn't want to deal with it, so I turned off UAC and rebooted. Finally, in the Windows SBS Console, there are status indicators for Security, Updates, Backup, and Other Alerts. The first three get stuck saying "Querying". Looking in the computer alerts, I have events showing the following services stopped: Background Intelligent Transfer Service KtmRm for Distributed Transaction Coordinator Distributed Transaction Coordinator Microsoft Exchange Information Store Microsoft Exchange System Attendant Microsoft Exchange Transport Windows Remote Management Update Services Windows Update I figured I must have configured something wrong accidentally and I couldn't find anything using Google explaining what might be the case, so I just decided to format the hard drive and reinstall SBS from scratch. I did this and everything was working last night, but I just turned the machine back on and it is doing the same thing again! On my second install, I did not configure anything except the following (all from SBS Console): Connect to the Internet (set IP and router address) Turn off customer feedback. Set up internet address. Decline to use a Smart Host for email. Added one standard user account. Since this happened again and I was very careful the second time not to configure anything outside of the SBS Console, I feel like there's something else going on. Right now the machine is on an isolated network that does have internet access. My desktop is the only other machine plugged into this network. Any and all help is appreciated (before I tear my hair out!)

  Read the article

• Email Tracking - By IP

  - by disasm

  I am trying to track an Email I received to see where it originated from (harmful scam Email). Here is the full header: Received-SPF: pass (domain of aol.com designates 205.188.109.203 as permitted sender) ZSwgeW91ciBpbmZvcm1hdGlvbiBoYXMgYmVlbiBhY2NlcHRlZCBhbmQgYXBw cm92ZWQgYnkgb3VyIFJlY3J1aXRpbmcgRGVwYXJ0bWVudC4gWU9VUiBGSVJT VCBBU1NJR05NRU5UIERFVEFJTFMuIFdlc3Rlcm4gVW5pb24gTW9uZXkgVHJh bnNmZXIgaGFkIHJlcG9ydHMgYWJvdXQgbGFwc2VzIGluIHRoZSBzZXJ2aWNl cyBvZiBzb21lIG9mIHRoZWlyIG91dGxldHMgYW5kIHNvbWUgbwEwAQEBAQN0 ZXh0L3BsYWluAwMwAgN0ZXh0L2h0bWwDAzIx X-YMailISG: HeDj35sWLDvNbQaO2B72kIm7hhiubE2qUysyBFo2m3GE4wsk FOs6uaYWwBVUBbL_ubGEs5Gitm1b86QFPuQYdS3g5s2f_uY3dyHhXh7DcBIB Ad4mJBzeRozs5.0s6vbqhsIEYlaKI4EDrsocJEbDbTUiUq2UyxZ7Ery8Iqow _sBVN0msHJvcI09KwmaXUteV_qCL7qFlj7WNSmdMM.wVUm3pyiWzw1VUZlyD nwoEzdEImQdwmJqoTM1YE8XU6BE8IkmUkh1Z8XkfLtHqmAsPi1_.Msbi8ubk QD71BcTABjb7ixELg5NfomsyZKVN.9G.TnuISlX5umByjS701ITyQ2PUYXai hoVCWg37bKWNR9MAWdogUK8PIV3MWPv5gdglNAKuPdS5Z7.01J39UGyH7R60 aIiIWdAsQ7_3VQBgIi9Seg2YM2j1U5g9QtdcJxBe0.1oigmj7G2sC9.YXNGX 3abQ1EcWVlJLuSuBbQ4Flpbe_Y3_ssz8nZIK2YjKy0U8WWe77vfnxdEBsknf w2OA_PAzHtuAAuxETnAOU_MeMIssgRAtihKC_26Au1LnKYCGPGADFBLaLNHF 30itI.kBvUjdvUfqV11dnGe50kFVzBGDMJFm8mXvb5WtIKq6qU1ZZmUroCew EgXjVZ.JKbux2KQmHh2zZbIJO3nOmLGkzuRczYiWCUNBDtmUZE6imuIQ4P6S RjusSbMITf2fIL_xe.qFCnW563sOdc4u.uXLDx.lq30740l8lWkkLX6KaDMF k9TY0VQKsMynqa4vXKpkTVNdukAcGd0p2i3newxY4q_9eZLn9czsJimfpKNW SX1bqjs0iCQHb4FTydf1Zpa2b.6lIhdjVlIM8tiWhfGhlUeM267T3njEM6nz 0vxyjparR_G_s0VnIVhSeLw2F5KpAL226w2yA.WBcqoG2ROSa7fK.0ZYwy36 Qcmk8C.HKj8Fng1qFLtEfaI4F66rCEJi7h1d6EK0Jk4a_TJnBBub1VQVoU.s SJ2ehs8aDjDqJw27_Ia4vYekKhIU8Oak0vYSmMXhZ5IvJfGfOHYVy4ebkoQf IDE3lSfex1nHZqcMqq0agPOZUOdznSIGJVx4T8m6MGwrEouvL.grhT6KUJQ5 g8UX6DVTgj.8lHuTyOzj3A3NRwDFs2JqicprOMJRS4UWYX8eQ1y4j.4ora36 LnWYm7k1n6X0lDBW5ZdZlsLy7.0al0G1uCIAZwBNo7FnHr6q2mQNwgFaPkNO FOiykqFHu0khLO_cZw87MpDslZO_3lFbJGlnchSs81hkESSQsldUxqdNkIV. yWsS58p1uuwVNksp4NB.QW41wfBtY5FU.Q80g8KiOZIz0daou3GlzoahcHoQ GPgSa86GKtSo.ew2xEUKk6c.ffAT9RjqNh5fzyhBdzEYURxJBYgMlL5DQp2G yYIGhlIS5h9JzPFVkk2XhBoY2NgEAAfJfAfqKoMNNKIW.bEwbgNa9xtSzHNg YdmDfOSkYkAGZDqwa.uONguq5.jqtnWDnx3GDyuoVg-- X-Originating-IP: [205.188.109.203] Authentication-Results: mta1343.mail.bf1.yahoo.com from=aol.com; domainkeys=neutral (no sig); from=mx.aol.com; dkim=pass (ok) Received: from 127.0.0.1 (EHLO omr-d06.mx.aol.com) (205.188.109.203) by mta1343.mail.bf1.yahoo.com with SMTP; Fri, 18 Oct 2013 10:11:15 -0700 Received: from mtaomg-da05.r1000.mx.aol.com (mtaomg-da05.r1000.mx.aol.com [172.29.51.141]) by omr-d06.mx.aol.com (Outbound Mail Relay) with ESMTP id ACFAD7012DFB4 for <.confidential.; Fri, 18 Oct 2013 13:11:15 -0400 (EDT) Received: from core-mfb002c.r1000.mail.aol.com (core-mfb002.r1000.mail.aol.com [172.29.47.199]) by mtaomg-da05.r1000.mx.aol.com (OMAG/Core Interface) with ESMTP id 2ADB6E000089 for <.confidential.; Fri, 18 Oct 2013 13:11:15 -0400 (EDT) References: <[email protected] <[email protected] <[email protected] To: .confidential. Subject:.confidential. In-Reply-To: <[email protected] X-MB-Message-Source: WebUI MIME-Version: 1.0 From: .confidential. X-MB-Message-Type: User Content-Type: multipart/alternative; boundary="--------MB_8D09A3C2FD3105D_1338_33A66_webmail-d257.sysops.aol.com" X-Mailer: AOL Webmail 38109-STANDARD Received: from 66.199.226.81 by webmail-d257.sysops.aol.com (205.188.17.42) with HTTP (WebMailUI); Fri, 18 Oct 2013 13:11:15 -0400 Message-Id: <[email protected] X-Originating-IP: [66.199.226.81] Date: Fri, 18 Oct 2013 13:11:15 -0400 (EDT) x-aol-global-disposition: G DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=mx.aol.com; s=20121107; t=1382116275; bh=9TXLF90L8beaMnjNzoKDwcv3Eq06jiZGN40YTBw2YOI=; h=From:To:Subject:Message-Id:Date:MIME-Version:Content-Type; b=xHVjoH5AccrOpPZoZZW+b41uJ7nzHDrryGsO6WzvtBOFGWX3xJMO3RB1ILFlJAsF6 P9olk8Gz6LDydX9SOZ4w/yPI8y8eU6z1AauwOPxw9F1lu82goIGwK3jIcvOv72koB5 Izq9By7L6PESEmmJ5nFc4ko9vH2CBMcJKPV95HTg= x-aol-sid: 3039ac1d338d52616bb37d53 Content-Length: 26445 The Email was from the aol domain, so I understand the IP of aol. My question is, looking at 66.199.226.81 , would it be safe to say that the Email originated from "Access Integrated Technologies"? Thanks for any help!

  Read the article

• Fast user switching suddenly stopped working on my Windows XP Prof machine

  - by John

  When I start Win XP SP2 I get to the welcome screen with no user names displayed. I then press Alt+Ctrl+Del twice and type in the username and then am able to login to Windows. When I go to user accounts in Control Panel I get the error message cells.item(...) is null or not an object. When I go to computer administration and then local users and groups there are no users listed under users but the groups is listed. I did a windows repair with no luck. I tried doing restore points but it said they didn’t work. Please help? My wife and I have been using fast user switching on out computer for years with no problem. Beginning a few months ago, I started Win XP Prof one day I get to the welcome screen with no user names displayed. I then press Alt+Ctrl+Del twice and type in the username and then am able to login to Windows with an account of owner. When I go to user accounts in Control Panel I get the error message cells.item(...) is null or not an object. When I go to computer administration and then local users and groups there are no users listed under users but the groups are listed. I have done system point restores and imports of exports of the registry I take with import. I have tried everything under safe mode and it makes no difference. This followed a Microsoft update the night before as I left the computer on. I tried to do a restore point but all my restore points failed and could not backout the MS updates. I was working with a fellow from Microsoft and he had me do all kinds of things but to no avail. He seems to think a DLL file is corrupt but which one? Finally in desperation he sent me a new OS XP Prof SP3 disk and I installed it and it wiped my hard drive. Luckily I took an Acronis Image backup first so I easily restored my system. I do not want to do a fresh windows update as it is heavily customized and worked fine up to that point. This has been going on for months, Thanks John

  Read the article

• Allow email from a particular sender through spam filter

  - by Greg

  We are running exchange 2010 and are using the built in anti-spam feature. We have set up Content Filtering, IP Block List Providers, Sender ID, Sender Reputation and it filters out most of the junk but it also quarantines all emails from one of our customers. It is being quarantined because of the Content Filter agent (Report Below). How can I add an exception for this email address to the Content Filter. I can see how to setup an exception for a delivery address ("Don't filter messages sent TO the following recipients") but I want to add [email protected] to our safe list. I don't want to add the whole domain as it is a very popular ISP in Australia and we often get junk from them. Filter Report: > Diagnostic information for administrators: > > Generating server: something.com > > [email protected] > #550 5.2.1 Content Filter agent quarantined this message ## > > Original message headers: > > Received: from icp-osb-irony-out4.external.iinet.net.au (203.59.1.220) > by server.local.something.com.au (192.5.0.105) with Microsoft SMTP > Server id > 14.1.218.12; Mon, 5 Nov 2012 02:40:40 +1100 X-IronPort-Anti-Spam-Filtered: true X-IronPort-Anti-Spam-Result: > AscOALeLllB8qwLw/2dsb2JhbABEKYUFhiigRQOWCwQEgQiBCIIZFAEBTiwCCAIBBwEIFDkBBBoqARoCAQIDAYd4uEuRXGEDiCWFT44UijeDAw > X-IronPort-AV: E=Sophos;i="4.80,710,1344182400"; > d="scan'208,217";a="55137861" Received: from unknown (HELO > asdf83c05c53a3) ([124.171.2.240]) by icp-osb-irony-out4.iinet.net.au > with ESMTP; 04 Nov 2012 23:40:26 +0800 Message-ID: > <E8C866D0299E4BCB8B156723893EB735@asdf83c05c53a3> From: Customer > <[email protected]> To: 'Person' <[email protected]> > Subject: A long sentance Date: Mon, 5 Nov 2011 06:07:57 +1100 > MIME-Version: 1.0 Content-Type: multipart/alternative; > boundary="----=_NextPart_000_0005_01C5F962.3CD09120" X-Priority: 3 > X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express > 6.00.2900.5931 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.6157 Return-Path: [email protected] Received-SPF: None > (server.local.something.com.au: [email protected] does not > designate permitted sender hosts)

  Read the article

• Backing up data stored on Amazon S3

  - by Fiver

  I have an EC2 instance running a web server that stores users' uploaded files to S3. The files are written once and never change, but are retrieved occasionally by the users. We will likely accumulate somewhere around 200-500GB of data per year. We would like to ensure this data is safe, particularly from accidental deletions and would like to be able to restore files that were deleted regardless of the reason. I have read about the versioning feature for S3 buckets, but I cannot seem to find if recovery is possible for files with no modification history. See the AWS docs here on versioning: http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectVersioning.html In those examples, they don't show the scenario where data is uploaded, but never modified, and then deleted. Are files deleted in this scenario recoverable? Then, we thought we may just backup the S3 files to Glacier using object lifecycle management: http://docs.aws.amazon.com/AmazonS3/latest/dev/object-lifecycle-mgmt.html But, it seems this will not work for us, as the file object is not copied to Glacier but moved to Glacier (more accurately it seems it is an object attribute that is changed, but anyway...). So it seems there is no direct way to backup S3 data, and transferring the data from S3 to local servers may be time-consuming and may incur significant transfer costs over time. Finally, we thought we would create a new bucket every month to serve as a monthly full backup, and copy the original bucket's data to the new one on Day 1. Then using something like duplicity (http://duplicity.nongnu.org/) we would synchronize the backup bucket every night. At the end of the month we would put the backup bucket's contents in Glacier storage, and create a new backup bucket using a new, current copy of the original bucket...and repeat this process. This seems like it would work and minimize the storage / transfer costs, but I'm not sure if duplicity allows bucket-to-bucket transfers directly without bringing data down to the controlling client first. So, I guess there are a couple questions here. First, does S3 versioning allow recovery of files that were never modified? Is there some way to "copy" files from S3 to Glacier that I have missed? Can duplicity or any other tool transfer files between S3 buckets directly to avoid transfer costs? Finally, am I way off the mark in my approach to backing up S3 data? Thanks in advance for any insight you could provide!

  Read the article

• Dangers of Running Computers w/o Air Conditioning

  - by Daniel Bingham

  I recently moved in to an apartment with out air conditioning. This is fine most of the time as I am in upstate New York. It only ever gets above the high 70s during the hottest of the summer months. And when it does, I'm stubborn enough that I'll just deal with wearing minimal clothing around the house. However, I'm worried about my computers. I'm a software developer and gamer, so many of my machines are very high powered. And at least one of them is a server that must be left on 24/7 (not just a game server - also serves multiple websites). I've never before had to worry about the heat too much, as I always lived in buildings with central air. The in building temperature rarely got much above 70 F. All of the machines I built had good enough air cooling that I never saw a problem. Now the temperature in building is pushing 100F and I'm worried that the machines will not be able to keep themselves cool enough by simply blowing already hot air over themselves. The hottest of them I've turned off. However, the server I cannot. It's an old Dell (not custom build) that runs on a Pentium 4 (2.2GHz). It only has a single hard drive, integrated video. And it'd not running any processor intensive servers. Just basic LAMP. It used to run a MUD server, but that's off for now. So it should be idling most of the time. I haven't been able to find any sort of built in temperature sensors in the hardware... at least not any that the programs I've found in the Debian repository can read. And it's an inherited machine to which I do not have the full specs, so I don't know the tolerances anyway. How worried should I be about it melting down on me? How worried should I be about the hard drive melting or becoming corrupted? To generalize the question for other people, what are the safe temperature tolerances for most machines. How widely does it vary, and how does one go about determining when their machine is running too hot and needs to be shut down?

  Read the article

• Bypassing "Found New Hardware Wizard" / Setting Windows to Install Drivers Automatically

  - by Synetech inc.

  Hi, My motherboard finally died after the better part of a decade, so I bought a used system. I put my old hard-drive and sound-card in the new system, and connected my old keyboard and mouse (the rest of the components—CPU, RAM, mobo, video card—are from the new system). I knew beforehand that it would be a challenge to get Windows to boot and install drivers for the new hardware (particularly since the foundational components are new), but I am completely unable to even attempt to get through the work of installing drivers for things like the video card because the keyboard and mouse won't work (they do work, in the BIOS screen, in DOS mode, in Windows 7, in XP's boot menu, etc., just not in Windows XP itself). Whenever I try to boot XP (in normal or safe mode), I get a bunch of balloons popping up for all the new hardware detected, and a New Hardware Found Wizard for Processor (obviously it has to install drivers for the lowest-level components on up). Unfortunately I cannot click Next since the keyboard and mouse won't work yet because the motherboard drivers (for the PS/2 or USB ports) are not yet installed. I even tried a serial mouse, but to no avail—again, it does work in DOS, 7, etc., but not XP because it doesn't have the serial port driver installed. I tried mounting the SOFTWARE and SYSTEM hives under Windows 7 in order to manually set the "unsigned drivers warning" to ignore (using both of the driver-signing policy settings that I found references to). That didn't work; I still get the wizard. They are not even fancy, proprietary, third-party, or unsigned drivers. They are drivers that come with Windows—as the drivers for CPU, RAM, IDE controller, etc. tend to be. And the keyboard and mouse drivers are the generic ones at that (but like I said, those are irrelevant since the drivers for the ports that they are connected to are not yet installed). Obviously at some point in time over the past several years, a setting got changed to make Windows always prompt me when it detects new hardware. (It was also configured to show the Shutdown Event Tracker on abnormal shutdowns, so I had to turn that off so that I could even see the desktop.) Oh, and I tried deleting all of the PNF files so that they get regenerated, but that too did not help. Does anyone know how I can reset Windows to at least try to automatically install drivers for new hardware before prompting me if it fails? Conversely, does anyone know how exactly one turns off automatic driver installation (and prompt with the wizard)? Thanks a lot.

  Read the article

• Should use EXT4 or XFS to be able to 'sync'/backup to S3?

  - by Rafa

  It's my first message here, so bear with me... (I have already checked quite a few of the "Related Questions" suggested by the editor) Here's the setup, a brand new dedicated server (8GB RAM, some 140+ GB disk, Raid 1 via HW controller, 15000 RPM) it's a production web server (with MySQL in it, too, not just serving web requests); not a personal desktop computer or similar. Ubuntu Server 64bit 10.04 LTS We have an Amazon EC2+EBS setup with the EBS volume formatted as XFS for easily taking snapshots to S3, via AWS' console. We are now migrating to the dedicated server and I want to be able to backup our data to Amazon's S3. The main reason being the possibility of using the latest snapshot from an EC2 instance in case of hardware failure on the dedicated server. There are two approaches I am thinking of: do a "simple" file-based backup with rsync, dumping the database' and other files, and uploading to amazon via S3 API commands, or to an EC2 instance, or something. do a file-system "freeze" (using XFS) with the usual ebs/ec2 snapshot tool to take part of the file system, take a snapshot, and upload it to Amazon. Here's my question (or series of questions): Can I safely use XFS for the whole system as the main and only format on the dedicated server? If not, is it safe to use EXT4? Or should I use something else? would then be possible to make snapshots of the system to upload to Amazon? Is it possible/feasible/practical to do what I want to do, anyway? any recommendations? When searching around for S3/EBS/XFS, anything relevant to my problem is usually focused on taking snapshots of a XFS system that is already an EBS volume. My intention is to do it in a "real"/metal dedicated server. Update: I just saw this on Wikipedia: XFS does not provide direct support for snapshots, as it expects the snapshot process to be implemented by the volume manager. I had always assumed that I could choose 2 ways of doing snapshots: via LVM or via XFS (without LVM). After reading this, I realize these 2 options are more like it: With XFS: 1) do xfs_freeze; 2) copy the frozen files via, eg, rsync; 3) unfreeze xfs With LVM and XFS: 1) do xfs_freeze; 2) make a binary copy of the frozen fs via lvcreate and related commands; 3) unfreeze xfs; 4) somehow backup the LVM snapshot. Thanks a lot in advance, Let me know if I need to clarify something.

  Read the article

• Seriousness of a "Smart" disk error. How long will it last?

  - by Workshop Alex

  I have an 1 TB data disk and the bios and Windows are reporting a "Smart" error. At least, I get a Smart event but it doesn't indicate how serious the failure could be. My system is about 6 months old, including the disk so the warranty will cover the damage. Unfortunately, I lack a second disk of 1 TB in size which I can use to make a full backup. The most important data on this disk is safe, but there's a lot of work data which can be regenerated but this would cost a lot of time. So I ordered an USB disk of 1 TB which will arrive in three days. By then I can make a full backup of the data and afterwards, it can crash. But will the disk live that long? (Well, I won't use the PC as long as I can't make a backup.) How serious is such a Smart event? I know it's serious enough to have it replaced, but will it live for another week or could it die any moment?Update: I purchased an 1 TB external disk and spent most of the day making a backup of the 1 TB disk. It survived that. I then received a new disk, since it was still under warranty and replaced the hard disk. Then I had to spend most of a day again to put back the backup. I need to send back the faulty disk and now have an additional external disk, which could always be practical. :-) The Smart Error report did not cause any failures on the original disk. I won't advise to ignore these warnings, but the disk still has enough life in it to last a few more days. (Just make sure you have a good back-up.) And oh, the horror of having to make a complete backup such a huge disk. :-) If your data is important, make sure you have something that supports incremental backups and lots of space. (In my case, the data wasn't very important, just practical to have on-disk together.)

  Read the article

• OpenVPN multiple servers on the same subnet, high availability

  - by andre

  Hey everyone. Let me start by saying that my Linux experience isn't super awesome but I can usually find my way around things easily. Over at work we have an OpenVPN setup that's been due for some improvement for a while now. The main server (tap mode) runs in our office, behind a rather slow DSL connection. The main problem is that, since I'm usually out of the office, every time I want to access something on the virtual network I have to go through that server to get anywhere else. We have two servers up on 100 Mbit connections that we use for development and production purposes, about 3 more servers in the office (one of them behind a different T1 line for VOIP) and about two dozen clients who use the network on a daily basis from various locations. We've had situations where network routing (outside of our control) would not allow people to reach our main OpenVPN server whilst the other locations were connectable. Also any time someone outside the office wants to fetch something from any of the servers (say, a 500 MB code repository), a whopping 20 KB/s download speed is just unacceptable these days (did I mention slow DSL? ok). We had to implement traffic shaping on this server since maxing out this connection was fairly trivial. I had the thought of running two (or more) OpenVPN servers in the network. These would have to have the same subnet though, as our application relies on virtual network's IP addresses for some of its core functionality. The clients would also preferably retain the same IP addresses but that's not vital. For simplicity, lets call the current server office and the second server I'm setting up, cloud. Call the server on the T1 phone. This proved to be rather complex because as soon as I connect to cloud, I cannot see office. Any routes to a server that would go through office also do not work while I'm connected to cloud (no ping, nothing) and vice-versa. There's no rules for iptables that would be blocking the traffic either. Recently I came across this article on linuxjournal but the solution they provide seems to only cover the use of two servers and somewhat outdated (can't even find much documentation, their wiki is offline). They also state that adding more servers would be a complex task. Ideally I would like to keep the existing server office running the virtual network and also run the OpenVPN daemon on the cloud and phone servers (100 Mbit and very reliable connection, respectively) so that we're on safe ground in case of a hardware failure, DSL failure, etc. So, in essence, I'm looking for a highly available OpenVPN solution (fix, patch, hack, tweak, whatever you want to call it) that will accept connections on multiple hosts (2 or more) whilst keeping the same IP address subnet regardless of the server to which you connect to. Thanks for reading and sorry for the long post, I hope it gets the point across :P

  Read the article

• What the best way to recover from when your RAID H/W incorrectly thinks a disk is missing

  - by Software Monkey

  I have a Windows 7 system with an MSI motherboard (running the latest AMD BIOS) and two of my four disks (not the system boot disk) configured via the Mobo as RAID-1. After a normal system restart today, the RAID BIOS reports that one of the two drives has been disconnected or has failed. It's not really failed; via recovery tools I can verify that if I take the BIOS out of RAID mode. But I can find no way to re-add the second hard disk to the array and rebuild via the BIOS - the only option seems be to delete the array and recreate it, but I've done that once before and it blows away the disk. It's done this once before, however on a subsequent reboot after double-checking the drive cabling (but not changing anything) and it boot up fine. So I think the mobo RAID is a little bit flaky. At this point I would like to remove the RAID drivers, change to AHCI mode and switch over to using a Windows 7 dynamic mirror disk. But the RAID drivers seem somehow deeply bound into the Windows startup - I can't find anything like the good ol' safe-mode in Windows 7. If I boot from the Win 7 install disk in ACHI mode I can use recovery tools to log in to the Windows 7 installation, so the boot drive it seems fine with ACHI mode. Additionally, I can see all my other disks, run chkdsk on them and they seem to be fine. If I try to boot from the HDD in AHCI mode, it just reboots part way through, presumably because the RAID drivers load and conflict with the BIOS being set to AHCI. So: How do I strip the RAID drivers from my Win 7 installation? If I delete the RAID logical disk, will it really delete partitioning information, or is that just a poorly worded message when it says the data on the disk will be deleted? If I disconnect the 2 disks in a RAID array, then delete the logical disk array, and then reconnect and reboot still in RAID mode, will the disks simply revert to RAID single-disks like my other 2 and then maybe I can leave windows with RAID drivers by operate the disks as singles with 2 of them in a Windows dynamic disk mirrored setup? Does Windows 7 have anything like the Windows XP Repair Install, where it will reinstall the O/S binaries from CD, but leave apps and setup alone. I am really hoping I don't have to do a complete reinstall of Windows 7 - the last one, when I upgraded from XP, took me two days to get everything set up and installed.

  Read the article

• Vista stuck at "Shutting down..." screen. Any way to get verbose logging?

  - by CapBBeard

  Hi all, My home machine has been running fine for about 3 years, no problems at all. Within the last couple of weeks it's had real trouble trying to shut down. It'll get so far and then just sit there at the "Shutting down..." screen for hours. I've left it overnight, I've tried in safe mode, all to no avail. These days, I just wait for the disk activity to finish up and then hold the power button to turn it off. Feels dirty as, especially because there's a RAID involved! The hardware itself is in pretty good shape and of decent spec; Core 2 Quad, 4GB RAM, 1TB RAID 1+0, so it's not quite like a 7 year old PC coming to end of life! In the last month, hardware hasn't changed except for a new monitor. Admittedly I haven't tried unplugging the monitor but I've never heard of that preventing a shutdown. I might give it a whirl later I guess, as a last resort. I've uninstalled old apps, done updates, checked the event log, looked in device manager, uninstalled all non-present devices, disabled various non-critical devices (imaging, audio etc), unplugged peripherals, stopped non-essential services, unplugged the network, disabled the network adapter entirely, ran chkdsk, verified my RAID, the list goes on. But not a single lead. I'm pretty stumped. It could be hardware, but I have no other evidence to suggest so; when the PC is running, it runs fine. Temperatures are good, gaming is smooth as always, disk performance is fine. Event log even makes it look like the shutdown was completed (gets to the point where the event log service stops). In fact, the PC doesn't appear to realise that I cut the power to it. So my question is, does anyone know if there is a way I can get some verbose output (or a log) from shutdown to give me some idea of what is causing the issue? I'm guessing it's stuck unloading some app/driver but it would be good to get some specifics! Unless anyone has any other ideas? I suspect a reinstall would resolve the issue, however I'm looking to get a new PC built in the next month or so, and the reinstall is going to be quite a big job so I'd rather just wait until then if it comes to that. Would still be nice to get this sorted in the mean time though. Cheers!

  Read the article

• Graphics card artifacting

  - by White Phoenix

  This is my current build: EVGA X58 (first generation) motherboard Intel i7 965 @ stock clocks 3x 2GB DDR3-1600 Corsair RAM at stock timings and voltages Corsair AX750 80 Plus Gold PSU 1 Optical Drive 1 Seagate 7200.10 500 GB drive 2x Western Digital Caviar Black 1 TB drives OCZ Vertex 1 60 GB EVGA GTX 460 Antec 1200 case HT-Omega Striker 7.1 Sound Card Windows 7 32-bit Professional (PAE Enabled) My graphics card started artifacting while I was playing a game. It artifacted, the display blinked, then I got an NVIDIA driver has crashed and recovered message. Kept going, more artifacts, another crash, but this time my display blanked out and I couldn't do anything. Restarted my computer - artifacting is in the BIOS - got to Windows 7 but it BSOD'd before I could even log in. I restarted the computer again - artifacts cleared themselves out and I managed to get to Win7, but it soon started blinking in and out and artifacting again. Checked the card temps and they're well within range. (50 idle, 70 full load) The ambient temperature here is about 80-85F with high humidity. Tried Safe Mode and it still froze up/BSOD'd. Already tried the following to fix this problem: - Reseat the graphics card and swapped in a different slot. - Removed cover on card and sprayed with compressed air to clean it out. - Swapped around memory and/or went with only using one stick at a time. - Underclocked card I called EVGA Tech Support and they said that the voltage on the 12V rail of my Corsair AX750 PSU was on the high end of the "acceptable" range (12.4V, highest within acceptable range is 12.6V - optimal is obviously 12V). They gave me an RMA number anyway, but I want to get a second opinion from you all before I send this thing off, as shipping from where I live to EVGA is kind of pricey. This PSU is only 6 months old. So that I don't have to play RMA tag, which case would be most likely? I'm strapped for cash at the moment so I want to reduce the amount of RMAs I have to do since shipping is expensive here. Is there any surefire way to test to see if it's really the graphics card or the PSU? I tried unplugging any devices that were connected to the 12V rail (except for my SSD and graphics card) as I do have 3 mechanical hard drives, but the voltage for that rail didn't drop (it remained at 12.4V). I'm fairly sure it isn't the drivers since I'm getting the artifacting at the BIOS too. Right now I'm back in Windows 7 but I don't know for how long until it messes up again. Any ideas?

  Read the article

• Why won't IE let users login to a website unless in In Private mode?

  - by Richard Fawcett

  I'm not entirely sure this belongs on SuperUser.com. I also considered ServerFault.com and StackOverflow.com, but on balance, I think it should belong here? We host a website which has the same code responding to multiple domain names. On 28th December (without any changes deployed to the website) a percentage of users suddenly could not login, and the blank login page was just rendered again even when the correct credentials were entered. The issue is still ongoing. After remote controlling an affected user's PC, we've found the following: The issue affects Internet Explorer 9. The user can login from the same machine on Chrome. The user can login from an In Private browser session using IE9. The user can login if the website is added to the Trusted Sites security zone. The user can NOT login from an IE session in safe mode (started with iexplore -extoff). Only one hostname that the website responds to prevents login, the same user account on the other hostname works fine (note that this is identical code and database running server side), even though that site is not in trusted sites zone. Series of HTTP requests in the failure case: GET request to protected page, returns a 302 FOUND response to login page. GET request to login page. POST to login page, containing credentials, returns redirect to protected page. GET request to protected page... for some reason auth fails and browser is redirected to login page, as in step 1. Other information: Operating system is Windows 7 Ultimate Edition. AV system is AVG Internet Security 2012. I can think of lots of things that could be going wrong, but in every case, one of the findings above is incompatible with the theory. Any ideas what is causing login to fail? Update 06-Jan-2012 Enhanced logging has shown that the .ASPXAUTH cookie is being set in step 3. Its expiry date is 28 days in the future, its path is /, the domain is mysite.com, and its value is an encrypted forms ticket, as expected. However, the cookie is not being received by the web server during step 4. Other cookies are being presented to the server during step 4, it's just this one that is missing. I've seen that cookies are usually set with a domain starting with a period, but mine isn't. Should it be .mysite.com instead of mysite.com? However, if this was wrong, it would presumably affect all users?

  Read the article

• Well....a ghost lives in my server...

  - by tsgiannis

  Hello to every body and greetings from Greece I have a rather unusual situation and i am running out of ideas. I have this old server (IBM x205 - P4 2.4Ghz,3xSCSI 36gb) and i was about a year ago i decided to use it as an additional domain controller,fax & file server...for this task i had a Delock 70154 SATA card along with 2x320 SATA II HDDs Everything was going super smoothly until about 3 weeks ago. I was on a trip and i was informermed when i got back that the server was found frozen...well i considered it was a glitch since a simple powerdown power up fixed everything.Again 2 weeks ago another freeze situation....it got suspicious but again power down power up everything was running.... Last again it frozen and when i power it up it came with a message that the Domain services could not start due to NTDS corruption....booting in safe mode revealed that there was an issue with the SATA Raid (degraded). After a lot of searching i degraded the server...cleaned Active Directory and pulled both HDDs out (one of these was really BAD ) and recovered my files (i had some problems with ho Delock handles the redudant HDD). Right now my server is vanilla simple...with only what the factory installed and here is where the fun begins. Everyday when i arrive at the office i find this particular machine dead..and i mean total dead...just a black screen and nothing else...the cpu fan is working ,the psu is working .keyboard and mouse are dead(they also lock my kvm) ...network is dead.... the machine is DEAD. I power it down forcilly ...i power it up and for the 8 hours i am in the office it works,either idling or running some kind of diagnostic...when i leave the office after some time..it maybe half an hour ...it maybe 4 hours the machine dies...at least this is the information the event log shows (" the previous shutdown at xx:xx:xx was unexpected) Well i must admit i am runnig out of ideas.... I have tried Memtest....nothing Passmark burn in test.....nothing Carefull study of the event log.....nothing Set Instead of restart..BSOD....nothing Power sceheme to sleep...all set to never. i know there are a lot of other tools that heavily stress a machine like occt but .... the machine is old...today i will give them a try nevertheless ..... One idea is to reformat it...but ... i really like to find what is causing this because i could get to a situation that everything is working for a while and kaboom...one day again is dying.. I really need a helping hand and every opinion / idea is well welcomed.... iknow the obvious solution is to never leave the office but....i have a life...sory server...:) P.S this situation with the machine dying some time after is going on for about one week...everyday i would set either the RAID to rebuild....or to copy/recover files and while everythig was working

  Read the article

• Network Services disabled (not starting) on Windows XP

  - by Rickesh John

  I am currently running Windows XP Service Pack 3 on my system. But today, when I failed to connect to the internet, via a LAN cable, I realized that almost all of the vital network services had stopped functioning. Any attempts to start it through services.msc gives me the following message: Could not start the DNS Client Service on Local Computer Error 1068: The dependency service group failed to start All my software or services that are related to networking have stopped functioning, for example, Windows Firewall is turned off permanently, so is my Avast Anti-Virus' service of Real Time Shields and Web Shield. When I insert the LAN wire into my laptop, it registers itself, but this is what I get when I do a ping localhost C:>ping localhost Unable to contact IP driver, error code 2 Moveover, with ipconfig I get this : Windows IP Configuration An internal error occurred: The request is not supported. Please contact Microsoft Product Support Services for further help. Additional Information: Unable to query host name On some further poking around, I saw that none of the "NETWORK SERVICE" process in task manager, except svchost.exe were running. Also, when I first opened the task manager, I saw some 20 processes running with username column empty for most of them. With some search in Google, I found out that these services were important, DHCP DNS Net logon Network connection Network location Awareness TCP/IP Net BIOS Helper none of them, except Network Connections are working, they do not start. The event viewer of my system shows a bunch of 7000 and 7001 event errors. I have tried re installing the network driver, booting in safe mode with networking and tried to enable those services mentioned above. I had disabled System Restore some time back, so I have no restore points for my system. I tried a lot of things from Google searches but none of them worked. Also, with such a long list of issue, I am a little confused as to what should I search on the internet. :( One more thing I would like to mention, previous morning, my anti-virus Avast detected a RootKit buried deep in my system folders. It was removed, but maybe this was a problem caused by the root kit. I did run a boot-time scan but no viruses were found. Please please please advice. Is formatting and re-installation of Windows my only option?

  Read the article

• Windows 7 losing one of my displays after restart

  - by j_kubik

  I have an Intel DZ68BC motherboard with Intel HD graphics card using two monitors (on DVI and on HDMI » VGA). My friend asked me to test if his NVIDIA graphics card works well on my computer (at his it was doing some trouble), so I inserted it in my computer, installed the NVIDIA driver and it worked quite well. Then I removed it, uninstalled everything NVIDIA-related I could find and switched monitors back to my Intel card. Since then after every system start/restart, the system sees only monitor on HDMI » VGA connector, completely ignoring the DVI monitor. I noticed that installing the Intel video drivers causes the system to recognize the second monitor if I don't immediately reboot. After a reboot, the system recognizes only the HDMI » VGA monitor. I also tried starting in safe-mode and using DriveSweeper to remove the remains of NVIDIA drivers. While it seems that some drivers were removed, the situation didn't change. Now I am out of ideas and I really wouldn't like to reinstall the system (again...). I also tried restoring the system to the state before this whole story, but it also didn't change anything. EDIT: I am still trying to troubleshoot this problem. The only point that I could start was driver re-instalation. I traced down the part that restores right settings to a call: C:\Users\Jarek\Desktop\GFX_Win7_64_8.15.10.2696\x64\Drv64.exe -driverinf "C:\Users\Jarek\Desktop\GFX_Win7_64_8.15.10.2696\Graphics\igdlh64.inf" -flags 20 -keypath "Software\Intel\Difx64" This call fixes my displays, and as workaround, I will add it for now to my autorun. I am still looking for better solution anyway... EDIT2: Using DriverView i made a list of currently used drivers both before and after fixing my display using above command. Then i compared logs: No drivers were removed by fixing command. Drivers added by fixing command: MS Remote Access serial network driver (asyncmac.sys) security processor (spsys.sys) Drivers that changed base address (indicates driver-reload?) Canonical Display Driver (cdd.dll) Intel Graphics Kernel Mode Driver (igdkmd64.sys) Monitor Driver (monitor.sys) Added drivers seem rather unrelated to the problem to me, reloaded drivers are just a cnsequence of installing new driver file so there is not much to go here... I really cannot make heads or tails out of it...

  Read the article

• turn off disable the performance cache

  - by jessie

  OK I run a streaming website and my CMS is giving me an error when uploading videos "Failed To Find Flength File" ok so I did some research. The answer I got from the coder was below. I did do all that, but the only thing I could not do is turn off what he refers to as performance cache, talked about in the last sentence... I am on a Cent OS Assuming the script is set up properly, you are probably dealing with some kind of write-caching. Some servers perform write-caching which prevents writing out the flength file or the entire CGITemp file during the upload. The flength file or the CGITemp file do not actually hit the disk until the upload is complete, making it worthless for reporting on progress during the upload. This may be fixed using a .htaccess file assuming your host supports them. Here is a link to an excellent tutorial on using .htaccess files. I strongly recommend giving it a quick read before attempting to install your own .htaccess file. 1. A mod_security module for Apache. To fix it just create a file called .htaccess (that's a period followed by "htaccess") and put the following lines in that file. Upload the file into the directory where the Uber-Uploader CGI ".pl" scripts resides, or in some directory above it (like your server's DOCUMENT_ROOT, i.e. the top-level of your webspace). htaccess files must be uploaded as ASCII mode, not BINARY. You may need to CHMOD the htaccess file to 644 or (RW-R--R--). # Turn off mod_security filtering. SecFilterEngine Off # The below probably isn't needed, # but better safe than sorry. SecFilterScanPOST Off If the above method does not work, try putting the following lines into the file SetEnvIfNoCase Content-Type \ "^multipart/form-data;" "MODSEC_NOPOSTBUFFERING=Do not buffer file uploads" mod_gzip_on No 2. "Performance Cache" enabled on OS X SERVER. If you're running OS X Server and the progress bar isn't working, it could be because of "performance caching." Apparently if ANY of your hosted sites are using performance caching, then by default, all sites (domains) will attempt to. The fix then is to disable the performance cache on all hosted sites.

  Read the article

• Windows 8 disk errors

  - by wrongusername

  So yesterday, I forcibly restarted my Windows 8 PC. VMWare Workstation was having some trouble with the guest Linux Mint OS. It wasn't responding for some time, so I tried suspending it September 28th or perhaps even before. It wouldn't suspend -- I forgot what the window looked like, but all options in the power menu were disabled (i.e. "Shutdown," "Power Off," and options like that were all disabled). I eventually killed the VMWare application through Task Manager, though I was too lazy to hunt down the running virtual machine itself, and decided to kill it by just shutting down my PC entirely. The PC wouldn't shut down for quite some time after the monitor went blank, so I did a cold reset by holding the power button. I then powered it on again and Windows briefly gave me some message like "Search for KERNEL_STACK_INPAGE_ERROR." Windows then started diagnosing some problems and gave me the message, "Repairing disk errors. This might take over an hour to complete." That was yesterday night, and I went to sleep without waiting for it to finish. This morning, it said that the repair failed, and that the log was at C:\windows\system32\LogFiles\srt\srtTrail.txt (as I remember it -- I don't have the exact path I wrote down right now). It gave me some other options to troubleshoot, such as resetting Windows (files and settings still intact, but programs not installed through the app store will be erased). That didn't work (no error message given, I was just told it didn't work). I tried rebooting in safe mode, the same diagnosis process begins, except that this time it doesn't bother with the automatic repairs again. So I tried using the command prompt to try to see if my files are at least still there. I was on the X drive, and I couldn't cd to the C drive. I couldn't find my folder under Users (of course?), and couldn't find the srt folder under LogFiles either. I am not sure what to try next. I have backed up everything, but to the cloud, so if absolutely necessary I can start off with a fresh copy of Windows and restore all my data, though it would be a hassle. Any thoughts on what might be wrong or what I can try? My computer was purchased just this June, so the hard drive should still be pretty new.

  Read the article

< Previous Page | 141 142 143 144 145 146 147 148 149 150 151 152  | Next Page >